Search Results

Search found 4847 results on 194 pages for 'john chan'.

Page 65/194 | < Previous Page | 61 62 63 64 65 66 67 68 69 70 71 72  | Next Page >

  • Looking for Fiddler2 help. connection to gateway refused...just got rid of a virus?

    - by john mackey
    I use Fiddler2 for facebook game items, and it's been a great success. I accessed a website to download some dat files I needed. I think it was eshare, ziddu or megaupload, one of those. Anyway, even before the rar file had downloaded, I got this weird green shield in the bottom right hand corner of my computer. It said a Trojan was trying to access my computer, or something to that extent. It prompted me to click the shield to begin anti-virus scanning. It turns out this rogue program is called Antivirus System Pro and is pretty hard to get rid of. After discovering the rogue program, I tried using Fiddler and got the following error: [Fiddler] Connection to Gateway failed. Exception Text: No connection could be made because the target machine actively refused it 127.0.0.1:5555 I ended up purchasing SpyDoctor + Antivirus, which I'm told is designed specifically for getting rid of these types of programs. Anyway, I did a quick-scan last night with spydoctor and malware bytes. Malware picked up 2 files, and Spydoctor found 4. Most were insignificant, but it did find a worm called Worm.Alcra.F, which was labeled high-priority. I don’t know if that’s the Anti-Virus Pro or not, but SpyDoctor said it got rid of all of those successfully. I tried to run Fiddler again before leaving home, but was still getting the "gateway failed" error. Im using the newest version of firefox. When I initially set up the Fiddler 2.2.8.6, I couldn’t get it to run at first, so I found this faq on the internet that said I needed to go through ToolsOptionsSettings and set up an HTTP Proxy to 127.0.0.1 and my Port to 8888. Once I set that up and downloaded this fiddler helper as a firefox add-on, it worked fine. When I turn on fiddler, it automatically takes my proxy setting from no proxy (default) to the 127.0.0.1 with Port 8888 set up. It worked fine until my computer detected this virus. Anyway, hopefully I've given you sufficient information to offer me your best advice here. Like I said, Spydoctor says the bad stuff is gone, so maybe the rogue program made some type of change in my fiddler that I could just reset or uncheck or something like that? Or will I need to completely remove fiddler and those dat files and rar files I downloaded? Any help would be greatly appreciated. Thanks for your time.

    Read the article

  • DCHP and Router load testing

    - by John H
    I manage a campground wifi network with an average of 10 - 60 active users. I have encountered issues where the router starts acting flaky (failing to assign DHCP or failing to pass traffic) without any clear warning (low cpu utilization, etc). I upgraded the router a couple times and ended up with a Netgear ProSafe VPN router that seems to be handling the traffic. The interesting thing is that the Netgear has lower specs than the Buffalo router it replaced, indicating the issue is with the DD-WRT firmware. While I'll be pursuing this issue on the dd-wrt forums, I need a way to test routers. My vision is having 1-2 computers connected on the LAN side and 1-2 computers connected on the WAN side. I want the LAN computers to be generating various type of traffic and connections, as well as requesting DCHP addresses. A few notes: The wireless aspect should be a non-issue. Most clients would connect to a wireless bridge and come into the router through a network cable. I had a monitoring server with Nagios running check_dhcp against the router. This server was connected directly by a network cable, eliminating wifi bridges and other devices from the equation. This question is somewhat related, but not exactly: Load testing wireless LANs I am going to look at IxChariot. While I'd ideally like to use a 1 computer on each side running Linux and preferably free software, I can entertain running Windows, multiple computers, or non-free software. Total bandwidth doesn't seem to be the issue. I can transfer large files all day. Even on the busiest days, the users seemed to only pull ~5Mbps. There is very little "LAN to LAN traffic" and most of it might never have reached the main router. The issue I need to test for seems to be tied to active users, or more appropriately, active sessions. I know active users or active clients is a meaningless term from a router standpoint and wouldn't mind having more appropriate terms to use. Summary: I need a way to test a routers ability in handling traffic from a large number of clients. My current strategy is to purchase a router, deploy it, and see how it fails in the live environment.

    Read the article

  • Disk space mismatch on OS X Server (Leopard)

    - by John Gardeniers
    My Nagios system sent me an alert to inform me that the disk space on one of the drives on our OS X server is very low. When I run df /Volumes/Apps/ I get /dev/disk0s3 117209520 114932472 2277048 99% /Volumes/Apps When I run du -c /Volumes/Apps it reports 11489944 total Why might there be such a vast difference? Even more importantly, how do I find the problem and what can I do about it? I'm essentially just a Windows admin, so am well out of my comfort zone here. I use a Mac but I'm not a Mac admin in any real sense of the word.

    Read the article

  • Allignment of ext3 partition on LVM RAID volume group

    - by John P
    I'm trying to add a partition on a LVM that resides on a RAID6 volume group and fdisk is complaining about the partition not residing on a physical sector boundry. My question is, how do you calculate the correct starting sector for a partition on a LVM? This partition will be formated ext3. Would it be better to just format the LVM directly instead of creating a new partition? Disk /dev/dedvol/backup: 2199.0 GB, 2199023255552 bytes 255 heads, 63 sectors/track, 267349 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 1048576 bytes / 8388608 bytes Disk identifier: 0x4e428f49 Device Boot Start End Blocks Id System /dev/dedvol/backup1 63 267349 2146982827+ 83 Linux Partition 1 does not start on physical sector boundary. lvdisplay /dev/dedvol/backup --- Logical volume --- LV Name /dev/dedvol/backup VG Name dedvol LV UUID OV2n5j-7LHb-exJL-t8dI-dU8A-2vxf-uIicCt LV Write Access read/write LV Status available # open 0 LV Size 2.00 TiB Current LE 524288 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 32768 Block device 253:1 vgdisplay dedvol --- Volume group --- VG Name dedvol System ID Format lvm2 Metadata Areas 1 Metadata Sequence No 3 VG Access read/write VG Status resizable MAX LV 0 Cur LV 2 Open LV 1 Max PV 0 Cur PV 1 Act PV 1 VG Size 14.55 TiB PE Size 4.00 MiB Total PE 3815448 Alloc PE / Size 3670016 / 14.00 TiB Free PE / Size 145432 / 568.09 GiB VG UUID 8fBcOk-aXGx-P3Qy-VVpJ-0zK1-fQgy-Cb691J

    Read the article

  • Best software for creating icons?

    - by John
    Hi, I'm a developer,but not very good designer.I need a lightweight software for creating icons for my applications. I have a logo of the product and want to make it an icon,please suggest the best software for that. NOTE: I do not need software for creating icons from scratch,but from large image to .ico.Something that will help me. Thanks in advance

    Read the article

  • Unable to delete all partitions on flash drive using Windows 7 OS??

    - by irrational John
    Recently I purchased an ADATA C802 8GB flash drive. Since the drive was new I decided to run some of the HD Tune Pro (v4.50) performance tests on it, mostly just for the heck of it. To avoid accidently destroying data HD Tune refuses to write to a drive unless there are no partitions on the drive. If you do attempt to write to a drive with partitions, it posts the message "Writing is disabled. To enable writing please remove all partitions." As you would expect, the ADATA came formatted with a single primary FAT32 partition in the Master Boot Record. But a number of unexpected things happened when I attempted to delete that partition. The first thing I tried was to use the Windows 7 (64-bit) Disk Management tool (diskmgmt.msc) to delete the partition. It would not let me. The context menu choice to delete that volume was not available. Next I opened up a command prompt window with Admin authority and ran diskpart. Diskpart deleted the volume for me. However, when I attempted to run an HD Tune write test on the drive I still got the "Writing is disabled" message. Huh??? So I fired up a utility I have which allows viewing drives at the sector level and verified that the partition table in the Master Boot Record was empty. No partitions. Yet HD Tune still thought there were partitions on the drive? So why was I still getting the "Writing is disabled" message from HD Tune Pro? And why wouldn't the Windows 7 Disk Management tool let me change the partitions on this drive. After doing the above, I plugged the ADATA into my MacBook. I was then able to format it as either a GPT or MBR partitioned drive with no problems. I am not looking for suggestions on how to format this drive. I can do that. What I do not understand and was hoping I might get insight into is why this drive behaves so strangely under Windows 7? And BTW, what's up with HD Tune Pro? BTW, if I plug the drive I formatted on my MacBook back into my Windows 7 64-bit system I still run into road blocks with the Disk Management tool. For example, I cannot delete all the GPT partitions on the ADATA so I can convert it into an MBR drive. I following Microsoft's instructions, the instructions just do not work with this ADATA flash drive. Anyone know what's up with this? It makes no sense to me. Has something changed in Windows 7 (Vista)??

    Read the article

  • Using Default Document with Forms Authentication

    - by John Rabotnik
    I have a site hosted on IIS7 with a default document specified as default.aspx. This works fine but my app uses Forms Authentication and I want to disable Anonymous Authentication completely. When I do disable anonymous authentication for everything except the login page, everything works fine but the default document setting stops working. With Anonymous authentication switched on if I visit http://mysite I get passed to http://mysite/default.aspx (which then redirects to the login page if the user hasn't already logged in) If I disable anonymous authentication (leaving only forms based auth enabled) and I visit http://mysite I get a permission denied page from IIS. Yet, if I visit http://mysite/default.aspx directly then the site works fine. I just want to disable anonymous authentication and have http://mysite go to http://mysite/default.aspx. Any ideas would be greatly appreciated.

    Read the article

  • Why does DBAN crash on my HDDs?

    - by John Watson
    I am using DBAN to erase HDD. DBAN is loaded from a CD and BIOS Boot order has been set to favour CD drive. On starting laptop, system boots from CD and DBAN interface can be seen. DBAN detects two storage devices, HDD and the SD Card. My HDD IS 320GB but DBAN says 298GB. It erases the SD card but when i try to erase HDD, it gives following error. DBAN finished with non-fatal errors. *ERROR /dev/sdb (process crash) *ERROR /dev/sda (process crash)

    Read the article

  • Is it possible to define a virtual directory in IIS and make the files relative to the physical dir

    - by Mikey John
    Is it possible to define a virtual directory in IIS and somehow make the files in that directory relative to the physical directory and not to the virtual directory ? For instance on my server I have the following folders: D:\WebSite\Css\myTheme.css, D:\WebSite\Images\image1.jpg I created a virtual directory on IIS resources.mysite: Inside my website I reference the sheet like this resources.mysite/myTheme.css But inside myTheme.css I reference pictures from ../Images/images1.jpg. So the problem is that image1.jpg is not found because it is relative to the physical folder and not the virtual folder on IIS. Can I solve this problem without modifying the style sheet ?

    Read the article

  • Does shared hosting hold some benefits over a VPS? [closed]

    - by John Nevermore
    I was looking a for a windows host for my ASP.NET MVC app and the prices in softsyshosting looked very decent. However i fail to understand, why do they offer codename "Enterprise" Shared hosting at the same price point as the codename "Economy" VPS ? Enterprise Shared: http://www.softsyshosting.com/windows.aspx The First Economy VPS: http://www.softsyshosting.com/windows-vps.aspx Why would someone be willing to pay the same amount of money for 350GB less bandwith, less database storage, less disk space, no RDP control .. ?

    Read the article

  • Is TortoiseSVN really this buggy?

    - by John Isaacks
    I have been using tortoise svn for a couple weeks now. I get errors very often. Almost everything I do creates an error. this is with repositories on the internet, locally on my machine or a machine on the network. So I started to keep track. Some examples are below. 12/31/2010 Can't move 'C:\Users\jisaacks\Desktop\my branch test.svn\tmp\entries' to 'C:\Users\jisaacks\Desktop\my branch test.svn\entries': The file or directory is corrupted and unreadable. 01/04/2011 Commit failed (details follow): Server sent unexpected return value (405 Method Not Allowed) in response to MKCOL request for '/svn/kranichs-svn/!svn/wrk/b316f15e-0869-4644-9c53-87aa0103506b/branches' 01/06/2011 Can't move 'C:\Users\jisaacks\Desktop\DVD Catalog\vendors.svn\tmp\entries' to 'C:\Users\jisaacks\Desktop\DVD Catalog\vendors.svn\entries': The file or directory is corrupted and unreadable. 01/06/2011 Can't move 'C:\Users\jisaacks\Desktop\DVD Catalog\cake\tests\test_app\views\layouts.svn\tmp\entries' to 'C:\Users\jisaacks\Desktop\DVD Catalog\cake\tests\test_app\views\layouts.svn\entries': The file or directory is corrupted and unreadable. 01/06/2011 Commit failed (details follow): attempt to write a readonly database attempt to write a readonly database That last one about the read only database happens every time I commit. Say if I am working on the head revision (7) in a working copy. I make a change and commit it. It gives me this error. But if I look at the log it tells me that there is now a revision 8 (the commit I just made) but I am still on revision 7. So I need to run update to be on the current revision that I just commited. I hope I explained that clearly. Anyways with all these errors I wonder.. Is TSVN just this unstable, does everyone have these issues. Or is it just me? If just me, what could I be doing wrong?

    Read the article

  • ADUC Exchange tabs - Windows 7 & Exchange 2003

    - by John Gardeniers
    I have the admin tools install on a Win 7 64 bit machine but would like to see the Exchange tabs in ADUC. Googling shows this is a popular request and the most common solution (and the only one which appears to work to all) is to install Exchange Server Management for Vista using esmvista.msi /q. That may well have worked on beta versions of Win 7 but is definitely not working with my OEM copy of Win 7. Can this perhaps be made to work by installing from an Exchange 2007 CD (which I don't have at this time), bearing in mind that we have Exchange 2003 only? Can someone please offer a solution that works? I figure some of you must have solved this by now. Edit: I don't know if this is relevant or not but the Win 7 machine is also running Office 2010 Pro. About the bounty I had intended to award the bounty to gWaldo for having taken the extra steps to try to help me with this issue. However, as I was about to do so my screen started scrolling and I actually clicked on the answer posted by natxo asenjo, who's answer offended me, without realising it. Perhaps if I wasn't rushing I might have noticed but that's now history.

    Read the article

  • Can anybody recommend a Windows system monitoring tool similar to iPulse for the Mac?

    - by John MacIntyre
    Occasionally, my PC grinds to a halt, and by the time I get any monitoring tools open (don't forget my PC is slow at this point), performance has picked up a bit. A friend recently told me he uses iPulse, which is awesome since it's always running, and you can just glance at it when there's an issue to see what is happening. Unfortunately it's only for the Mac. Does anybody know of a good Windows system monitoring tool similar to iPulse for the Mac?

    Read the article

  • Pasting images into gmail from clipboard, shows fine when sent, but arrives as text

    - by John Robertson
    I have had consistent problems with pasting images into Gmail. I use Firefox (just in case that is relevant, but I wouldn't expect so). The image displays fine as I write it. But when it arrives at my family members Gmail account, it is being displayed in some base64 encoded form as many pages of text with a beginning like: img src="data:image/png;base64,iVBORw0KGgoAAA..... On the receiving end I cannot get the images to display properly.

    Read the article

  • Scripted forwarding for Outlook 2003

    - by John Gardeniers
    We have a staff member in sales who has gone onto a 4 day week (getting ready for retirement), so each Thursday afternoon her email needs to be forwarded to another user and each Friday afternoon it needs to be set back. I'm using the VBS script below to do this, run via the Task Scheduler. Although the script appears to do it's job, based on what I see when I view the user's Exchange settings, Exchange doesn't always recognise that the setting has changed. e.g. Last Thursday the forwarding was a enabled and worked correctly. On Friday the script did it's thing to clear the forwarding but Exchange continued to forward messages all weekend. I found that I can force Exchange to honour the changed setting be merely opening and closing the user's properties in ADUC. Of course I don't want to have to do that. Is there a non-manual way I can have Exchange read and honour the setting? The script (VBS): ' Call this script with the following parameters: ' ' SrcUser - The logon ID of the suer who's account is to be modified ' DstUser - The logon account of the person to who mail is to be forwarded ' Use "reset" to clear the email forwarding SrcUser = WScript.Arguments.Item(0) DstUser = WScript.Arguments.Item(1) SourceUser = SearchDistinguishedName(SrcUser) 'The user login name Set objUser = GetObject("LDAP://" & SourceUser) If DstUser = "reset" then objUser.PutEx 1, "altRecipient", "" Else ForwardTo = SearchDistinguishedName(DstUser)' The contact common name objUser.Put "AltRecipient", ForwardTo End If objUser.SetInfo Public Function SearchDistinguishedName(ByVal vSAN) Dim oRootDSE, oConnection, oCommand, oRecordSet Set oRootDSE = GetObject("LDAP://rootDSE") Set oConnection = CreateObject("ADODB.Connection") oConnection.Open "Provider=ADsDSOObject;" Set oCommand = CreateObject("ADODB.Command") oCommand.ActiveConnection = oConnection oCommand.CommandText = "<LDAP://" & oRootDSE.get("defaultNamingContext") & ">;(&(objectCategory=User)(samAccountName=" & vSAN & "));distinguishedName;subtree" Set oRecordSet = oCommand.Execute On Error Resume Next SearchDistinguishedName = oRecordSet.Fields("DistinguishedName") On Error GoTo 0 oConnection.Close Set oRecordSet = Nothing Set oCommand = Nothing Set oConnection = Nothing Set oRootDSE = Nothing End Function

    Read the article

  • How do you passthrough native SATA drives to a guest on ESXi?

    - by John
    I have ESXi 4.0 running on an Intel DX58S0 Mothboardboard with an Intel Core i7 930 processor. VT-d is also enabled. I have three drives in the system, drive 0 is used for ESXi. Drive 1 and 2 contain data from an older machine and show up under the "Storage Adapters" section in configuration. I would like to allow a guest machine to access the data on these drives (as nativly as possible). I have enabled passthrough of the motherboard's built in SATA controller (Intel/Marvell 88SE6121 ). This controller shows up in my guest OS, but the guest shows no drives aside from the normal virtual drive. I have tried a Linux guest and Windows7. I have also configured the host machine to try IDE/RAID/ACHI modes for the SATA controller. Any ideas how I can configure one of my guests to get at the raw data on these drives?

    Read the article

  • Why is ntpd not updating the time on my server?

    - by John
    I have ntpd running on my server. It's all the default settings, except I commented out its ability to be a server to other machines: # restrict -4 default kod notrap nomodify nopeer noquery # restrict -6 default kod notrap nomodify nopeer noquery restrict default ignore If I run ntpdate -q ntp.ubuntu.com, I'm told that my machine's clock is off by 7 seconds. What's going on? How can I diagnose what's happening, is there a log I can turn on? more info #1 # ntpq -np remote refid st t when poll reach delay offset jitter ============================================================================== 91.189.94.4 193.79.237.14 2 u 30 64 7 108.518 -0.136 0.361 more info #2 Here's what this looked like when I asked the question: # ntpdate -q ntp.ubuntu.com server 91.189.94.4, stratum 2, offset 7.191308, delay 0.13310 10 Jan 20:38:09 ntpdate[31055]: step time server 91.189.94.4 offset 7.191308 sec And here's what it looks like now, after restarting ntpd a couple times (I'm assuming that's what fixed it): # ntpdate -q ntp.ubuntu.com server 91.189.94.4, stratum 2, offset 0.000112, delay 0.13164 10 Jan 20:47:03 ntpdate[31419]: adjust time server 91.189.94.4 offset 0.000112 sec

    Read the article

  • Build and migrated to software raid (mdadm) on GPT disk, now can't assemble array

    - by John H
    mdadm, gpt issues, unrecognized partitions. Simplified question: How do I get mdadm to recognize GPT partitions? I have been attempting to convert/copy my Ubuntu 11.10 OS from a single drive to software raid 1. I have done similar in the past, but in this case, I was adding in a drive that has been configured for GPT and I tried to work with that without fully looking into the implications. Currently, I have a non-booting mdadm RAID 1 array of /dev/md127 (the OS assigned that and it keeps picking up). I am booting off of live USB keys, currently System Rescue CD from sysresccd. While gdisk and parted can see all the partitions, most of the OS utilities do not, including mdadm. My main goal is just to make the raid array accessible so I can get pull the data and start fresh (without using GPT). /dev/md127 /dev/sda /dev/sda1 <- GPT type partition /dev/sda1 <- exists within the GPT part, member of md127 /dev/sda2 <- exists within the GPT part, empty /dev/sdb /dev/sdb1 <- GPT type partition /dev/sdb1 <- exists within the GPT part, member of md127 History: POINT A: The original OS was install on sda (actually /dev/sda6). I used a the Ubuntu live usb to add sdb. I got warning from fdisk about GPT so I used gdisk to create a raid partition (sdb1) and mdadm to create a raid1 mirror with a missing drive. I had many issues getting this working (including being unable to get grub to install) but I eventually got it to boot using grub on sda and /dev/md127 off of sdb. So at point A, I had copied my OS from sda6 to md127 on sdb. I then booted into a rescue mode and attempted to get a bootloader onto sdb, which failed. I then discovered my mistake: I had installed the raid onto sdb instead of sdb1, essentially overwriting the sdb1 partition. POINT B: I now had two copies of my data- one on md127/sdb, and one on sda. I destroyed data on sda and created a new GPT table on sda. I then created sda1 for the raid array, and sda2 for a scratch partition. I added sda1 into the raid array and let it rebuild. md127 now covered /dev/sdb and /dev/sda1 as fully active and synced. POINT C: I rebooted onto linux rescue again and was still able to access the raid array. I then removed /dev/sdb from the array and created /dev/sdb1 for the raid. I added sdb1 to the array and let it sync. I was able to mount and access /dev/md127 without issues. Once it completed, both /dev/sda1 and /dev/sdb1 were GPT partitions and actively syncing. POINT D (current): I rebooted again to test if the array would boot and grub failed to load. I booted off of my live thumb drive and found that I can no longer assemble the raid array. mdadm doesn't see the required partitions. -- root@freshdesk /root % uname -a Linux freshdesk 3.0.24-std251-amd64 #2 SMP Sat Mar 17 12:08:55 UTC 2012 x86_64 AMD Athlon(tm) II X4 645 Processor AuthenticAMD GNU/Linux === /proc/partitions and parted look good: root@freshdesk /root % cat /proc/partitions major minor #blocks name 7 0 301788 loop0 8 0 976762584 sda 8 1 732579840 sda1 8 2 244181703 sda2 8 16 732574584 sdb 8 17 732573543 sdb1 8 32 7876607 sdc 8 33 7873349 sdc1 (parted) print all Model: ATA ST31000528AS (scsi) Disk /dev/sda: 1000GB Sector size (logical/physical): 512B/512B Partition Table: gpt Number Start End Size File system Name Flags 1 1049kB 750GB 750GB ext4 2 750GB 1000GB 250GB Linux/Windows data Model: ATA SAMSUNG HD753LJ (scsi) Disk /dev/sdb: 750GB Sector size (logical/physical): 512B/512B Partition Table: gpt Number Start End Size File system Name Flags 1 1049kB 750GB 750GB ext4 Linux RAID raid Model: SanDisk SanDisk Cruzer (scsi) Disk /dev/sdc: 8066MB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 31.7kB 8062MB 8062MB primary fat32 boot, lba === # no sda2, and I double the sdb1 is the one shown in parted root@freshdesk /root % blkid /dev/loop0: TYPE="squashfs" /dev/sda1: UUID="75dd6c2d-f0a8-4302-9da4-792cc7d72355" TYPE="ext4" /dev/sdc1: LABEL="PENDRIVE" UUID="1102-3720" TYPE="vfat" /dev/sdb1: UUID="2dd89f15-65bb-ff88-e368-bf24bd0fce41" TYPE="linux_raid_member" root@freshdesk /root % mdadm -E /dev/sda1 mdadm: No md superblock detected on /dev/sda1. # this is probably a result of me attempting to force the array up, putting superblocks on the GPT partition root@freshdesk /root % mdadm -E /dev/sdb1 /dev/sdb1: Magic : a92b4efc Version : 0.90.00 UUID : 2dd89f15:65bbff88:e368bf24:bd0fce41 Creation Time : Fri Mar 30 19:25:30 2012 Raid Level : raid1 Used Dev Size : 732568320 (698.63 GiB 750.15 GB) Array Size : 732568320 (698.63 GiB 750.15 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 127 Update Time : Sat Mar 31 12:39:38 2012 State : clean Active Devices : 1 Working Devices : 2 Failed Devices : 1 Spare Devices : 1 Checksum : a7d038b3 - correct Events : 20195 Number Major Minor RaidDevice State this 2 8 17 2 spare /dev/sdb1 0 0 8 1 0 active sync /dev/sda1 1 1 0 0 1 faulty removed 2 2 8 17 2 spare /dev/sdb1 === root@freshdesk /root % mdadm -A /dev/md127 /dev/sda1 /dev/sdb1 mdadm: no recogniseable superblock on /dev/sda1 mdadm: /dev/sda1 has no superblock - assembly aborted root@freshdesk /root % mdadm -A /dev/md127 /dev/sdb1 mdadm: cannot open device /dev/sdb1: Device or resource busy mdadm: /dev/sdb1 has no superblock - assembly aborted

    Read the article

  • How to rename database without first stopping SQL instance to flush connections

    - by John Galt
    Is there a way to force a database into single user mode so a script can be run to rename databases? I find I have to Restart the instance of SQL (to force off any connections from a web app, etc.) and then I can run this script: USE master go sp_dboption MDS, "single user", true go sp_dboption StagingMDS, "single user", true go sp_renamedb MDS, LastMonthMDS go sp_renamedb StagingMDS, MDS go sp_dboption LastMonthMDS, "single user", false go sp_dboption MDS, "single user", false go After this script runs, I can restart IIS for my web app and it can connect to the new production database. All the above works well and we've been doing this for years but now we've upgraded to SQL 2008 and the SQL2008 instance also hosts other databases that support other web apps. So, rather than using a Restart of the whole SQL instance to enable subsequent single-user mode on 2 databases, is there a less intrusive way of accomplishing this? Thanks.

    Read the article

  • (Mac Intel) HP PS driver prints in B&W from Adobe Reader after installing Cannon PS driver

    - by John B
    I have a unique problem that leaves me at a loss as to where to start troubleshooting. We have three Macs we use for graphics, two of which are PowerPC and one which is Intel. They are set up to print to an HP 5500dn, but occasionally this printer gets tied up with a massive print job, so I installed the PS driver (iR-PSv1.81MacOSX) for the Cannon C3200 Printer/copier on each of the machines. Both of the PowerPC Macs installed without issue, but the Intel Mac exhibits strange behavior: I've confirmed that while the Cannon driver is installed (whether or not the Cannon is set up for printing in print settings), the HP 5500dn will print in color from Safari, but only prints in black and white from Adobe Reader. The Cannon printer itself has not exhibited any strange behavior As soon as the Cannon driver is uninstalled, the HP 5500dn prints in color from Adobe Reader again. We run a network of Windows PCs, and the 'Mac room' mostly takes care of itself, so we don't have any experienced Mac administrators onsite. The Cannon is capable of Appletalk, but the PS driver seemed easier to work with (and Appletalk is currently disable on the Cannon. I'm not against using the Appletalk compatible drivers, but I would rather use the PS driver if at all possible - I don't want to open up the proverbial can of worms. If someone has any clues or suggestions that would help troubleshoot this problem, I would be grateful. I've already done some googling, but due to the obscure nature of this problem, I haven't been very successful.

    Read the article

  • Samsung S23A750D 23" 120Hz get no signal

    - by John Carter
    I have a few days ago received this monitor. Samsung S23A750D 23" 120Hz I am using it with a Gainward Nvidia GTX570 Phantom GPU via DisplayPort cabling. The trouble I am having is that the monitor has great trouble picking up a signal from the GPU when the computer has gone into sleep mode or been switched off (at this point I can get a signal to the monitor). It's only when I turn the computer back on and then the monitor that I get no signal. To get a signal I have to remove the power cable and put back in or sometimes remove the DP cable and put back in. I have tried not turning the monitor off (the monitor goes into a sleep mode when the computer goes into sleep mode) but on putting the computer on it does not pick up a signal. It is only by removing the power cable and/or DisplayPort cable will I get a signal. And this is intermittent. I have tried upgrading the firmware from Samsung but this hasn't helped. Any ideas?

    Read the article

  • Varnish: User specific pages

    - by jchong0707
    I'm new to Varnish and am interested in using it to speed up my web application I wanted to know if Varnish can handle caching and serving user specific content. For example if I have a page say for example /welcome which is dynamically generated in the backend and is user specific So if User John Smith shows up to /welcome it'll show in the page itself 'Welcome John Smith' and if Bob Smith shows up to /welcome it'll show 'Welcome Bob Smith' Ideally both of those /welcome pages will be cached for each unique User, is this something Varnish can do? (is this even a good Use Case of Varnish?) Thanks!

    Read the article

< Previous Page | 61 62 63 64 65 66 67 68 69 70 71 72  | Next Page >