Search Results

Search found 4313 results on 173 pages for 'mod rewrite'.

Page 65/173 | < Previous Page | 61 62 63 64 65 66 67 68 69 70 71 72  | Next Page >

  • Apache2 Enabling Includes module causes svn access to quit working

    - by Matthew Talbert
    I have dav_svn installed to provide http access to my svn repos. The url is directly under root, eg mywebsite.com/svn/individual-repo. This setup has been working great for some time. Now, I need SSI (server-side includes) for a project, so I enabled this module with a2enmod include. Now, tortoisesvn can't access the repo; it always returns a 301 permanent redirect. Some playing with it reveals I can access it in a browser if I'm sure to include the trailing / but it still doesn't work in TortoiseSVN. I've looked at all of the faq's for this problem with TortoiseSVN and apache, and none of them seem to apply to my problem. Anyone have any insight into this problem? I'm running Ubuntu 9.10 with Apache 2.2.12. The only change I've made to my configuration is to enable the includes mod. Here's my dav_svn conf: <Location /svn> DAV svn SVNParentPath /home/matthew/svn AuthType Basic AuthName "Subversion repository" AuthUserFile /etc/subversion/passwd Require valid-user </Location> and here's the relevant part of my virtual host conf: <Location /svn> SetHandler None Order allow,deny Allow from all </Location> Edit: OK, I've discovered that the real conflict is between the include module and basic authentication. That is, if I disable the include module, browse to the subversion repo, enter my user/pass for the basic authentication, I can browse it just fine. It even continues to work after I re-enable the include module. However, if I browse with another browser where I'm not already authenticated, then it no longer works.

    Read the article

  • Page reload needed several times before loading normally

    - by tim peterson
    Sorry my question is so vague I just have no idea where to start in solving it and am quite a novice with servers. Recently my site (an https connection, running on an Amazon EC2 ubuntu apache2.2) has this issue where I need to load the page several times (3-4) before it will load normally without issue. It will then load normally as long as I keep loading pages regularly (every couple seconds). It will stall again if I don't load pages for a few minutes. It has nothing to do with my application because I don't have this problem with the exact same app codebase on my Apache installation on my laptop. The only thing to my knowledge that I changed is that I installed mod_pagespeed https://developers.google.com/speed/pagespeed/mod. However, I have since turned it off by setting my pagespeed.conf to mod_pagespeed off. Unfortunately, that didn't solve the problem. I'm wondering general advice on how to troubleshoot this problem. For instance are there linux commands to check page loading peformance? Also, it looks like I have lots of new error.logs in my /var/log/apache2 directory which i believe weren't there a few months ago. lots of this : error.log RewriteLog.log.24.gz ssl_access.log.40.gz error.log.1 RewriteLog.log.25.gz ssl_access.log.41.gz error.log.10.gz RewriteLog.log.26.gz ssl_access.log.42.gz error.log.11.gz RewriteLog.log.27.gz any thoughts? thank you, tim

    Read the article

  • Apache + mod_fcgid + perl = error 500

    - by f-aminov
    Hi guys! I'm trying to setup Apache2.2 with mod_fcgid and libapache2-mod-perl2 with no luck. I've created a fcgi-bin directory in the root directory of my website and put there a test.fcgi file with the following content: #!/usr/bin/perl use CGI; print "This is test.fcgi!\n"; While trying to access it via http://www.website.dom/fcgi-bin/test.fcgi I get error 500 (Internal Server Error). Here is my vhost config: <VirtualHost 95.131.29.226:8080> ServerName website.com DocumentRoot /var/www/data/website.com SuexecUserGroup user group ServerAlias www.website.com AddType application/x-httpd-php .php .php3 .php4 .php5 .phtml <Directory "/var/www/data/website.com/fcgi-bin/"> Options +ExecCGI Allow from all Order allow,deny AddHandler fcgid-script .fcgi </Directory> </VirtualHost> fcgid.conf: <IfModule mod_fcgid.c> AddHandler fcgid-script .fcgi SocketPath /var/lib/apache2/fcgid/sock IdleTimeout 3600 ProcessLifeTime 7200 MaxProcessCount 8 DefaultMaxClassProcessCount 2 IPCConnectTimeout 8 IPCCommTimeout 60 </IfModule> SuExec log: [2010-04-06 03:02:47]: uid: (500/equ) gid: (502/equ) cmd: test.fcgi Apache error log: test! test! [Tue Apr 06 03:02:51 2010] [notice] mod_fcgid: process /var/www/data/website.com/fcgi-bin/test.fcgi(26267) exit(communication error), terminated by calling exit(), return code: 0 [Tue Apr 06 03:02:53 2010] [notice] mod_fcgid: process /var/www/data/website.com/fcgi-bin/test.fcgi(26261) exit(server exited), terminated by calling exit(), return code: 0 I've no clue why I'm getting error 500, but when I'm trying to access this file using console ($ perl /var/www/data/website.com/fcgin-bin/test.fcgi) everthing works fine without any errors... Any suggestions on how to solve this problem would be greatly appreciated. Thank you!

    Read the article

  • What is causing apache2 proxy error when forwarding to tomcat?

    - by Dark Star1
    I set up apache to proxy for tomcat but I am getting the following error when I target the page. I sometimes get a blank page or a 503: [Error] [Mon Dec 03 04:58:16 2012] [error] proxy: ap_get_scoreboard_lb(2) failed in child 29611 for worker proxy:reverse [Mon Dec 03 04:58:16 2012] [error] proxy: ap_get_scoreboard_lb(1) failed in child 29611 for worker https://localhost:8443/ [Mon Dec 03 04:58:16 2012] [error] proxy: ap_get_scoreboard_lb(0) failed in child 29611 for worker http://localhost:8080/ I have two vhosts configured on the vm as follows: [http host] <VirtualHost *:80> ServerName www.mysite.net ServerAlias mysite.net ProxyRequests Off ProxyPreserveHost On <Proxy *> Order deny,allow Allow from all </Proxy> ProxyPass / http://localhost:8080/ retry=0 ProxyPassReverse / http://localhost:8080/ retry=0 </VirtualHost> [ssl vhost] <VirtualHost *:443> ServerName www.mysite.net ServerAlias mysite.net ErrorLog /var/log/apache2/error.log LogLevel warn CustomLog /var/log/apache2/access.log combined ServerSignature On SSLEngine on SSLProxyEngine on SSLCertificateFile /etc/apache2/ssl/server.crt SSLCertificateKeyFile /etc/apache2/ssl/server.key ProxyRequests Off ProxyPreserveHost On ProxyPass / https://localhost:8443/ retry=0 ProxyPassReverse / https://localhost:8443/ retry=0 </VirtualHost> My system details are: Apache/2.2.22 (Ubuntu) mod_jk/1.2.32 mod_ssl/2.2.22 OpenSSL/1.0.1 mod proxy_http is also enabled.

    Read the article

  • Install mod_perl2 on Apache 2.2.14 (Ubuntu10.04)

    - by MICADO
    I have installed via synaptic package ibapache2-mod-perl2. I tried this line in httpd.conf: "LoadModule perl_module modules/mod_perl.so" Apache tells me when I reload the server : "[warn] module perl_module is already loaded, skipping". Well ok, but when i try to look in the browser to a repertory i don't have access .Apache send me the error : Forbidden You don't have permission to access /cgi-bin/ on this server. Apache/2.2.14 (Ubuntu) Server at 192.168.0.10 Port 90 But this should show modperl is installed and that's not the case... I would like my virtual host that follows run with mod_perl2 <VirtualHost v1:80> ServerAdmin webmaster@localhost ServerName v1 DocumentRoot /var/www/v1 <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /var/www/v1/html/> Options Indexes FollowSymLinks MultiViews AllowOverride None Order allow,deny allow from all </Directory> ScriptAlias /cgi-bin/ /var/www/v1/cgi-bin/ <Directory "/var/www/v1/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> I'd like to know how to configure mod_perl2. Do i have to change something in the apache configuration file to make my cgi repertory works with mod_perl2? Thanks to any help!

    Read the article

  • Is there a special way to set up Garry's Mod for Mac? [closed]

    - by credford
    I just downloaded Garry's Mod from Steam and every time I try to play Single Player on the first map, it crashes on the Loading Resources section of the progress bar. Here is some of the exception information the system prints out: Exception Type: EXC_BAD_ACCESS (SIGBUS) Exception Codes: KERN_PROTECTION_FAILURE at 0x000000001acec4d0 Crashed Thread: 4 When I ran it on the Windows side (Bootcamp), Windows 7 required me to give Garry's Mod some permissions. I wasn't asked to do this on the Mac side. Maybe that's it? Is there some kind of special setup for the Mac?

    Read the article

  • Apache 2.2 + mod_fcgid + PHP 5.4: (104) Connection reset by peer

    - by Michele Piccirillo
    On a Debian 6 VPS, I'm running PHP 5.4 via mod_fcgid on a couple of different virtual hosts, managed by Virtualmin GPL. At random, I get 500 Internal Server Errors; restarting Apache brings everything back to normality. Examining the logs, I find messages of this kind: [Thu Oct 04 15:39:35 2012] [warn] [client 173.252.100.117] (104)Connection reset by peer: mod_fcgid: error reading data from FastCGI server [Thu Oct 04 15:39:35 2012] [error] [client 173.252.100.117] Premature end of script headers: index.php Any ideas about what is happening? UPDATE: I found a similar question and the author reported to have solved the problem disabling APC. I tried following the advice, but I'm still getting the same errors. VirtualHost configuration SuexecUserGroup "#1000" "#1000" ServerName example.com DocumentRoot /home/example/public_html ScriptAlias /cgi-bin/ /home/example/cgi-bin/ DirectoryIndex index.html index.htm index.php index.php4 index.php5 <Directory /home/example/public_html> Options -Indexes +IncludesNOEXEC +FollowSymLinks +ExecCGI allow from all AllowOverride All AddHandler fcgid-script .php AddHandler fcgid-script .php5 FCGIWrapper /home/example/fcgi-bin/php5.fcgi .php FCGIWrapper /home/example/fcgi-bin/php5.fcgi .php5 </Directory> <Directory /home/example/cgi-bin> allow from all </Directory> RemoveHandler .php RemoveHandler .php5 IPCCommTimeout 61 FcgidMaxRequestLen 1073741824 php5.fcgi #!/bin/bash PHPRC=$PWD/../etc/php5 export PHPRC umask 022 export PHP_FCGI_CHILDREN PHP_FCGI_MAX_REQUESTS=99999 export PHP_FCGI_MAX_REQUESTS SCRIPT_FILENAME=$PATH_TRANSLATED export SCRIPT_FILENAME exec /usr/bin/php5-cgi Package versions webmin-virtual-server/virtualmin-universal 3.94.gpl-2 apache2/squeeze 2.2.16-6+squeeze8 libapache2-mod-fcgid/squeeze 1:2.3.6-1+squeeze1 php5 5.4.7-1~dotdeb.0 php5-apc 5.4.7-1~dotdeb.0

    Read the article

  • mod_rpaf with apache error_log

    - by Camden S.
    I'm using mod-rpaf with Apache 2.4 and it's working properly (showing the real client IP's) in my Apache access_log... but not in my error_log. My error log just shows the client IP address of the proxy server (my load balancer in this case) Here's an example of what I see in my error_log where 123.123.123.123 is the IP of my load balancer/proxy. == /usr/local/apache2/logs/error_log <== [Tue Jun 05 20:24:31.027525 2012] [access_compat:error] [pid 9145:tid 140485731845888] [client 123.123.123.123:20396] AH01797: client denied by server configuration: /wwwroot/private/secret.pdf The exact same request produces the following in my access_log where 456.456.456.456 is a real client IP (not the IP of the load balancer). 456.456.456.456 - - [05/Jun/2012:20:24:31 +0000] "GET /wwwroot/private/secret.pdf HTTP/1.1" 403 228 "-" "Mozilla/5.0 (Macintosh; Intel Mac OS X 10.7; rv:12.0) Gecko/20100101 Firefox/12.0" Here's my httpd.conf entry: # RPAF LoadModule rpaf_module modules/mod_rpaf-2.0.so RPAFenable On RPAFproxy_ips 127.0.0.1 123.123.123.123 RPAFsethostname On RPAFheader X-Forwarded-For What do I need to do to get the real IP addresses showing in my Apache error_log?

    Read the article

  • configuring apache with mod_mono for .net app

    - by Mystere Man
    I'm having a huge problem getting mod_mono and apache configured to work correctly. I've had this working at one time, but I can't seem to figure out where i'm going wrong. I'm using mono-server4. I'm trying to use a seperate port from the main website. So I have in /etc/apache2/sites-available (with a link from sites-enabled) a vhost configuration that looks like this: <VirtualHost *:9999> ServerName XXX ServerAdmin web-admin@XXX DocumentRoot /var/xxx MonoServerPath XXX "/usr/bin/mod-mono-server4" MonoDebug XXX true MonoSetEnv XXX MONO_IOMAP=all MonoApplications XXX "/:/var/xxx" <Location "/"> Allow from all Order allow,deny MonoSetServerAlias XXX SetHandler mono SetOutputFilter DEFLATE SetEnvIfNoCase Request_URI "\.(?:gif|jpe?g|png)$" no-gzip dont-vary </Location> <IfModule mod_deflate.c> AddOutputFilterByType DEFLATE text/html text/plain text/xml text/javascript </IfModule> </VirtualHost> I used mono-server4-admin to create the application mono-server4-admin --path=/var/xxx --app=/XXX --port=9999 When i start apache, it gives the error: Syntax error on line 13 of /etc/apache2/sites-enabled/xxx: Server alias 'XXX, not found. This corresponds with the MonoSetServerAlias statement. So I commented it out, and when I do that apache starts. However, when I try to access the site, I get a 500 error. The access log indicates that it's trying to access the app on port 80, rather than 9999. I'm not sure what the problem is here. Can anyone help me get figure out where I went wrong? My mono-server4-hosts.conf contains this: # start /etc/mono-server4/conf.d/RMRSite/10_XXX Alias /XXX "/var/xxx" AddMonoApplications default "/XXX:/var/xxx" <Directory /var/xxx> SetHandler mono <IfModule mod_dir.c> DirectoryIndex index.aspx </IfModule> </Directory> # end /etc/mono-server4/conf.d/XXX/10_XXX Also, my /etc/mono-server4/conf.d/XXX/10_XXX contains this: This is the configuration file for the XXX virtualhost path = /var/xxx alias = /XXX vhost = localhost port = 9999

    Read the article

  • Install mod_perl2 on Apache 2.2.14 (Ubuntu10.04)

    - by MICADO
    Hi guys, I have installed via synaptic package ibapache2-mod-perl2. I tried this line in httpd.conf: "LoadModule perl_module modules/mod_perl.so" Apache tells me when I reload the server : "[warn] module perl_module is already loaded, skipping". Well ok, but when i try to look in the browser to a repertory i don't have access .Apache send me the error : Forbidden You don't have permission to access /cgi-bin/ on this server. Apache/2.2.14 (Ubuntu) Server at 192.168.0.10 Port 90 But this should show modperl is installed and that's not the case... I would like my virtual host that follows run with mod_perl2 <VirtualHost v1:80> ServerAdmin webmaster@localhost ServerName v1 DocumentRoot /var/www/v1 <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /var/www/v1/html/> Options Indexes FollowSymLinks MultiViews AllowOverride None Order allow,deny allow from all </Directory> ScriptAlias /cgi-bin/ /var/www/v1/cgi-bin/ <Directory "/var/www/v1/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> I'd like to know how to configure mod_perl2. Do i have to change something in the apache configuration file to make my cgi repertory works with mod_perl2? Thanks to any help!

    Read the article

  • How to Compile Mod_Python 3.3.1 for Python 2.6 and Apache 2.2 on Windows?

    - by John
    I have no experience compiling code other than using Visual Studio's Build command. I am hoping we can create a step by step guide for compiling mod_python on windows. Please be as descriptive as possible. This is what I've done so far: Download and install python 2.6.2 Download and install apache 2.2.11 Download the most recent source code for mod_python from svn From here I'm lost to what the next step is. I've downloaded Microsoft Visual C++ 2008 Express Edition. As mentioned by Hao I've already tried the tutorial mentioned in that link. Here is the error messages I'm receiving with that tutorial. C:\mod_python\distbuild_installer.bat Could Not Find C:\mod_python\src*.obj running bdist_wininst running build running build_py creating build creating build\lib.win32-2.6 creating build\lib.win32-2.6\mod_python copying C:\mod_python\lib\python\mod_python\apache.py - build\lib.win32-2.6\mod _python copying C:\mod_python\lib\python\mod_python\cache.py - build\lib.win32-2.6\mod_ python copying C:\mod_python\lib\python\mod_python\cgihandler.py - build\lib.win32-2.6 \mod_python copying C:\mod_python\lib\python\mod_python\Cookie.py - build\lib.win32-2.6\mod _python copying C:\mod_python\lib\python\mod_python\importer.py - build\lib.win32-2.6\m od_python copying C:\mod_python\lib\python\mod_python\psp.py - build\lib.win32-2.6\mod_py thon copying C:\mod_python\lib\python\mod_python\publisher.py - build\lib.win32-2.6\ mod_python copying C:\mod_python\lib\python\mod_python\python22.py - build\lib.win32-2.6\m od_python copying C:\mod_python\lib\python\mod_python\Session.py - build\lib.win32-2.6\mo d_python copying C:\mod_python\lib\python\mod_python\testhandler.py - build\lib.win32-2. 6\mod_python copying C:\mod_python\lib\python\mod_python\util.py - build\lib.win32-2.6\mod_p ython copying C:\mod_python\lib\python\mod_python__init__.py - build\lib.win32-2.6\m od_python running build_ext building 'mod_python_so' extension creating build\temp.win32-2.6 creating build\temp.win32-2.6\Release creating build\temp.win32-2.6\Release\mod_python creating build\temp.win32-2.6\Release\mod_python\src C:\Program Files\Microsoft Visual Studio 9.0\VC\BIN\cl.exe /c /nologo /Ox /MD /W 3 /GS- /DNDEBUG -DWIN32 -DNDEBUG -D_WINDOWS -IC:\mod_python\src\include -Ic:\apa che\include -IC:\Python26\include -IC:\Python26\PC /TcC:\mod_python\src\mod_pyth on.c /Fobuild\temp.win32-2.6\Release\mod_python\src\mod_python.obj mod_python.c c:\apache\include\ap_config.h(25) : fatal error C1083: Cannot open include file: 'apr.h': No such file or directory error: command '"C:\Program Files\Microsoft Visual Studio 9.0\VC\BIN\cl.exe"' fa iled with exit status 2

    Read the article

  • How to manipulate default document with rewrite module on IIS7?

    - by eugeneK
    Until few month ago i've been using IIS 6 where i could add different Default Documents to each websites which are physically same directory. Since II7 which adds Default Document value to web config i couldn't use such technique as web.config was changed for all the directory. So I've found simple solution with rewrite module to change Default Document for each domain <defaultDocument enabled="false" /> <rewrite> <rewriteMaps> <rewriteMap name="ResolveDefaultDocForHost"> <add key="site1.com" value="Default1.aspx" /> <add key="site2.com" value="Default2.aspx" /> </rewriteMap> </rewriteMaps> <rules> <rule name="DefaultDoc Redirect If No Trailing Slash" stopProcessing="true"> <match url=".*[^/]$" /> <conditions> <add input="{REQUEST_FILENAME}" matchType="IsDirectory" /> </conditions> <action type="Redirect" url="{R:0}/" /> </rule> <rule name="PerHostDefaultDocSlash" stopProcessing="true"> <match url="$|.*/$" /> <conditions> <add input="{REQUEST_FILENAME}" matchType="IsDirectory" /> <add input="{ResolveDefaultDocForHost:{HTTP_HOST}}" pattern="(.+)" /> </conditions> <action type="Rewrite" url="{R:0}{C:1}" appendQueryString="true" /> </rule> </rules> </rewrite> Now i've got two other issues. first of all i can't use canonical url rewrite, if i set one then site1.com and site2.com redirected to www.site1.com instead of having www. for each. second problem is that there is a directory within site1' and site2' physical directory called members in which Default.aspx is always a Default Document doesn't matter which domain name was used. It doesn't work as well. Please help me with this issue because i've never thought i will get such problem with supposed to be better IIS7...

    Read the article

  • setting up a basic mod_proxy virtual host

    - by SevenProxies
    I'm trying to set up a basic virtual host to proxy all requests to test.local to a WEBrick server I have running on 127.0.0.1:8080 while keeping all requests to localhost going to my static files in /var/www. I'm running Ubuntu 10.04. I have libapache2-mod-proxy-html installed and I have the module enabled with a2enmod proxy. I also have my virtual host enabled. However, whenever I go to test.local I always get a cryptic 500 server error and all my logs are telling me is: [Thu Mar 03 01:43:10 2011] [warn] proxy: No protocol handler was valid for the URL /. If you are using a DSO version of mod_proxy, make sure the proxy submodules are included in the configuration using LoadModule. Here's my virtual host: <VirtualHost test.local:80> LoadModule proxy_module /usr/lib/apache2/modules/mod_proxy.so ServerAdmin webmaster@localhost ServerName test.local ProxyPreserveHost On # prevents this folder from being proxied ProxyPass /static ! DocumentRoot /var/www <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /var/www/> Options Indexes FollowSymLinks MultiViews AllowOverride None Order allow,deny allow from all </Directory> <Proxy *> Order allow,deny Allow from all </Proxy> ProxyPass / http://localhost:8080/ ProxyPassReverse / http://localhost:8080/ ErrorLog /var/log/apache2/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog /var/log/apache2/access.log combined and here's my settings for mod_proxy: <IfModule mod_proxy.c> #turning ProxyRequests on and allowing proxying from all may allow #spammers to use your proxy to send email. ProxyRequests Off <Proxy *> # default settings #AddDefaultCharset off #Order deny,allow #Deny from all ##Allow from .example.com AddDefaultCharset off Order allow,deny Allow from all </Proxy> # Enable/disable the handling of HTTP/1.1 "Via:" headers. # ("Full" adds the server version; "Block" removes all outgoing Via: headers) # Set to one of: Off | On | Full | Block ProxyVia On </IfModule> Does anybody know what I'm doing wrong? Thanks

    Read the article

  • apache mod_cache in v2.2 - enable cache based on url

    - by Janning
    We are using apache2.2 as a front-end server with application servers as reverse proxies behind apache. We are using mod_cache for some images and enabled it like this: <IfModule mod_disk_cache.c> CacheEnable disk / CacheRoot /var/cache/apache2/mod_disk_cache CacheIgnoreCacheControl On CacheMaxFileSize 2500000 CacheIgnoreURLSessionIdentifiers jsessionid CacheIgnoreHeaders Set-Cookie </IfModule> The image urls vary completely and have no common start pattern, but they all end in ".png". Thats why we used the root in CacheEnable / If not served from the cache, the request is forwarded to an application server via reverse proxy. So far so good, cache is working fine. But I really only need to cache all image request ending in ".png". My above configuration still works as my application server send an appropriate Cache-Control: no-cache header on the way back to apache. So most pages send a no-cache header back and they get not cached at all. My ".png" responses doesn't send a Cache-Control header so apache is only going to cache all urls with ".png". Fine. But when a new request enters apache, apache does not know that only .png requests should be considered, so every request is checking a file on disk (recorded with strace -e trace=file -p pid): [pid 19063] open("/var/cache/apache2/mod_disk_cache/zK/q8/Kd/g6OIv@woJRC_ba_A.header", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory) I don't want to have apache going to disk every request, as the majority of requests are not cached at all. And we have up to 10.000 request/s at peak time. Sometimes our read IO wait spikes. It is not getting really slow, but we try to tweak it for better performance. In apache 2.4 you can say: <LocationMatch .png$> CacheEnable disk </LocationMatch> This is not possible in 2.2 and as I see no backports for debian I am not going to upgrade. So I tried to tweak apache2.2 to follow my rules: <IfModule mod_disk_cache.c> SetEnvIf Request_URI "\.png$" image RequestHeader unset Cache-Control RequestHeader append Cache-Control no-cache env=!image CacheEnable disk / CacheRoot /var/cache/apache2/mod_disk_cache #CacheIgnoreCacheControl on CacheMaxFileSize 2500000 CacheIgnoreURLSessionIdentifiers jsessionid CacheIgnoreHeaders Set-Cookie </IfModule> The idea is to let apache decide to serve request from cache based on Cache-control header (CacheIgnoreCacheControl default to off). And before simply set a RequestHeader based on the request. If it is not an image request, set a Cache-control header, so it should bypass the cache at all. This does not work, I guess because of late processing of RequestHeader directive, see https://httpd.apache.org/docs/2.2/mod/mod_headers.html#early I can't add early processing as "early" keyword can't be used together with a conditional "env=!image" I can't change the url requesting the images and I know there are of course other solutions. But I am only interested in configuring apache2.2 to reach my goal. Does anybody has an idea how to achieve my goal?

    Read the article

  • Apache/Jboss Issue - is this connection timeout?

    - by user115391
    We have an application. The architecture is as below 1 load balancer (apache), which redirects to 2 app servers (jboss). The site is working fine and I am able to access it fine. But sometimes, randomly the homepage takes a while (like 30-40 secs) to load. I tried checking the logs but could not figure out why. I used the httptraffic analyzer, fiddler to see the traffic, but it just says the request/response took 30 secs or so. I checked the apache access logs, mod_jk.log. My configurations are below mod-jk.conf LoadModule jk_module modules/mod_jk.so JkWorkersFile conf/workers.properties JkLogFile logs/mod_jk.log #JkLogLevel info #JkLogLevel debug JkLogLevel error # Select the log format JkLogStampFormat "[%a %b %d %H:%M:%S %Y]" JkOptions +ForwardKeySize +ForwardURICompatUnparsed -ForwardDirectories JkRequestLogFormat "%w %V %T %P %{tid}P %D" JkMount /__application__/* loadbalancer JkUnMount /__application__/images/* loadbalancer <VirtualHost *:8080 > JkMountFile conf/uriworkermap.properties </VirtualHost> JkShmFile run/jk.shm <Location /jkstatus> JkMount status Order deny,allow Deny from all Allow from 127.0.0.1 </Location> ----------------------------- uriworkermap.properties Simple worker configuration file # Mount the Servlet context to the ajp13 worker /=loadbalancer /*=loadbalancer ----------------------------- workers.properties worker.list=loadbalancer,status worker.template.port=8009 worker.template.type=ajp13 worker.template.lbfactor=1 worker.template.prepost_timeout=10000 worker.template.connect_timeout=10000 worker.template.ping_mode=A worker.worker1.reference=worker.template worker.worker1.host=hostname1 worker.worker2.reference=worker.template worker.worker2.host=hostname2 worker.loadbalancer.type=lb worker.loadbalancer.balance_workers=worker1,worker2 worker.status.type=status ----------------------------- my jboss server.xml - $JBOSS_HOME/server/default/deploy/jbossweb.sar/server.xml --------------------------------- The logs from access log is below The issue where it took time - look at the seconds column [23/Mar/2012:12:10:38 -0400] "GET / HTTP/1.1" 200 138 x.x.x.x - - [23/Mar/2012:12:10:49 -0400] "GET /index.jsp HTTP/1.1" 302 - x.x.x.x - - [23/Mar/2012:12:11:10 -0400] "GET /home.jsp HTTP/1.1" 200 936 x.x.x.x - - [23/Mar/2012:12:11:31 -0400] "POST /login/ HTTP/1.1" 200 8895 x.x.x.x - - [23/Mar/2012:12:11:52 -0400] "GET /login/includes/login-style.css HTTP/1.1" 304 - The one after the issue x.x.x.x - - [23/Mar/2012:12:12:18 -0400] "GET / HTTP/1.1" 200 138 x.x.x.x - - [23/Mar/2012:12:12:18 -0400] "GET /index.jsp HTTP/1.1" 302 - x.x.x.x - - [23/Mar/2012:12:12:18 -0400] "GET /home.jsp HTTP/1.1" 200 936 x.x.x.x - - [23/Mar/2012:12:12:18 -0400] "POST /login/ HTTP/1.1" 200 8895 x.x.x.x - - [23/Mar/2012:12:12:18 -0400] "GET /login/includes/login-style.css HTTP/1.1" 304 - Would it be a cache or timeout issue? Any help is appreciated. Thanks.

    Read the article

  • Apache2 graceful restart stops proxying requests to passenger

    - by Rob
    Issue with apache mod proxy, it stops proxying requests after a graceful restart but not all the time. It seems to happen only on a Sunday when a graceful restart is triggered by logrotate. [Sun Sep 9 05:25:06 2012] [notice] SIGUSR1 received. Doing graceful restart [Sun Sep 9 05:25:06 2012] [notice] Apache/2.2.22 (Ubuntu) Phusion_Passenger/3.0.11 configured -- resuming normal operations [Sun Sep 9 05:25:06 2012] [error] proxy: ap_get_scoreboard_lb(492) failed in child 26153 for worker proxy:reverse [Sun Sep 9 05:25:06 2012] [error] proxy: ap_get_scoreboard_lb(486) failed in child 26153 for worker http://api.myservice.org/api [Sun Sep 9 05:25:06 2012] [error] proxy: ap_get_scoreboard_lb(487) failed in child 26153 for worker http://api.myservice.org/editor/$1 [Sun Sep 9 05:25:06 2012] [error] proxy: ap_get_scoreboard_lb(489) failed in child 26153 for worker http://api.myservice.org/build [Sun Sep 9 05:25:06 2012] [error] proxy: ap_get_scoreboard_lb(490) failed in child 26153 for worker http://api.myservice.org/help [Sun Sep 9 05:25:06 2012] [error] proxy: ap_get_scoreboard_lb(491) failed in child 26153 for worker http://api.myservice.org/motd.html [Sun Sep 9 05:25:06 2012] [error] proxy: ap_get_scoreboard_lb(480) failed in child 26153 for worker http://api.myservice.org/api [Sun Sep 9 05:25:06 2012] [error] proxy: ap_get_scoreboard_lb(481) failed in child 26153 for worker http://api.myservice.org/editor/$1 [Sun Sep 9 05:25:06 2012] [error] proxy: ap_get_scoreboard_lb(483) failed in child 26153 for worker http://api.myservice.org/build [Sun Sep 9 05:25:06 2012] [error] proxy: ap_get_scoreboard_lb(484) failed in child 26153 for worker http://api.myservice.org/help [Sun Sep 9 05:25:06 2012] [error] proxy: ap_get_scoreboard_lb(485) failed in child 26153 for worker http://api.myservice.org/motd.html [Sun Sep 9 05:25:06 2012] [error] proxy: ap_get_scoreboard_lb(479) failed in child 26153 for worker http://api.myservice.org/motd.html After these lines, the logs are flooded with 404's because the requests are not being proxied. It's worth noting that the destination is just another vhost on the same apache instance, but the vhost (http://api.myservice.org) is serving passenger (mod_rails) I was thinking that maybe there's some startup issues with the passenger workers not being ready during a graceful restart? After a full restart resolves it and everything returns to normal. //Edit Here's the vhost config, thanks :) <VirtualHost *:80> UseCanonicalName Off LogFormat "%V %h %l %u %t \"%r\" %s %b" vcommon <Directory /var/www/vhosts> RewriteEngine on AllowOverride All </Directory> RewriteEngine on RewriteCond /var/www/vhosts/%{SERVER_NAME} !-d RewriteCond /var/www/vhosts/%{SERVER_NAME} !-l RewriteRule ^ http://sitenotfound.myservice.org/ [R=302,L] VirtualDocumentRoot /var/www/vhosts/%0/current # Rewrite requests to /assets to map to the /var/file-store/<SERVER_NAME>/ RewriteMap lowercase int:tolower RewriteCond %{REQUEST_URI} ^/assets/ RewriteRule ^/assets/(.*)$ /var/file-store/${lowercase:%{SERVER_NAME}}/$1 # Map /login to /editor.html as it's far friendlier. RewriteCond %{REQUEST_URI} ^/login RewriteRule .* /editor.html [PT] # Forward some requests to the API ProxyPass /api http://api.myservice.org/api ProxyPass /site.json http://api.myservice.org/api/editor/site ProxyPassMatch ^/editor/(.*)$ http://api.myservice.org/editor/$1 ProxyPassMatch ^/api/(.*) http://api.myservice.org/api/$1 ProxyPass /build http://api.myservice.org/build ProxyPass /help http://api.myservice.org/help ProxyPass /motd.html http://api.myservice.org/motd.html <Proxy *> Order allow,deny Allow from all </Proxy> # TODO generate slightly more specific Error Documents for 401/403/500's, # but for now the 404 page is good enough ErrorDocument 401 /404.html ErrorDocument 403 /404.html ErrorDocument 404 /404.html ErrorDocument 500 /404.html </VirtualHost>

    Read the article

  • mod_wsgi, .htaccess and rewriterule

    - by hadaraz
    I'm using several django projects running on the same apache instance through mod_wsgi, configured with virtualhost for each site, see the httpd.conf here. For one of the sites I want to use static-cache (staticgenerator), so I set up a directory with .htaccess file which contains: RequestHeader unset X-Forwarded-Host RewriteEngine on RewriteBase / RewriteCond %{REQUEST_FILENAME} !-d RewriteCond %{REQUEST_FILENAME}/index.html !-f RewriteRule ^(.*) http://127.0.0.1:3456/$1 [P] where 3456 is the django port on the server. Using this rewrite rule, the request is always forwarded to the mod_wsgi handler, even if the file or directory exists, and if the file index.html exists the request shows as request-path/index.html. I tried another setup: RequestHeader unset X-Forwarded-Host RewriteEngine on RewriteBase / RewriteCond $1 !-d RewriteCond $1index.html !-f RewriteRule ^(.*) http://127.0.0.1:3456/$1 [P] but got almost the same results. All requests are transferred to the mod_wsgi handler, but the request path is now the original one. To sum it up: What is the correct RewriteCond to use here? How do you transfer a request to the mod_wsgi handler? Is it the right way? If that's not the way to do it, then how do you serve static files from a directory when they exist, and when they don't you serve from apache/mode_wsgi? Thanks for your help.

    Read the article

  • Apache 2.2, worker mpm, mod_fcgid and PHP: Can't apply process slot

    - by mopoke
    We're having an issue on an apache server where every 15 to 20 minutes it stops serving PHP requests entirely. On occasions it will return a 503 error, other times it will recover enough to serve the page but only after a delay of a minute or more. Static content is still served during that time. In the log file, there's errors reported along the lines of: [Wed Sep 28 10:45:39 2011] [warn] mod_fcgid: can't apply process slot for /xxx/ajaxfolder/ajax_features.php [Wed Sep 28 10:45:41 2011] [warn] mod_fcgid: can't apply process slot for /xxx/statics/poll/index.php [Wed Sep 28 10:45:45 2011] [warn] mod_fcgid: can't apply process slot for /xxx/index.php [Wed Sep 28 10:45:45 2011] [warn] mod_fcgid: can't apply process slot for /xxx/index.php There is RAM free and, indeed, it seems that more php processes get spawned. /server-status shows lots of threads in the "W" state as well as some FastCGI processes in "Exiting(communication error)" state. I rebuilt mod_fcgid from source as the packaged version was quite old. It's using current stable version (2.3.6) of mod_fcgid. FCGI config: FcgidBusyScanInterval 30 FcgidBusyTimeout 60 FcgidIdleScanInterval 30 FcgidIdleTimeout 45 FcgidIOTimeout 60 FcgidConnectTimeout 20 FcgidMaxProcesses 100 FcgidMaxRequestsPerProcess 500 FcgidOutputBufferSize 1048576 System info: Linux xxx.com 2.6.28-11-server #42-Ubuntu SMP Fri Apr 17 02:45:36 UTC 2009 x86_64 GNU/Linux DISTRIB_ID=Ubuntu DISTRIB_RELEASE=9.04 DISTRIB_CODENAME=jaunty DISTRIB_DESCRIPTION="Ubuntu 9.04" Apache info: Server version: Apache/2.2.11 (Ubuntu) Server built: Aug 16 2010 17:45:55 Server's Module Magic Number: 20051115:21 Server loaded: APR 1.2.12, APR-Util 1.2.12 Compiled using: APR 1.2.12, APR-Util 1.2.12 Architecture: 64-bit Server MPM: Worker threaded: yes (fixed thread count) forked: yes (variable process count) Server compiled with.... -D APACHE_MPM_DIR="server/mpm/worker" -D APR_HAS_SENDFILE -D APR_HAS_MMAP -D APR_HAVE_IPV6 (IPv4-mapped addresses enabled) -D APR_USE_SYSVSEM_SERIALIZE -D APR_USE_PTHREAD_SERIALIZE -D SINGLE_LISTEN_UNSERIALIZED_ACCEPT -D APR_HAS_OTHER_CHILD -D AP_HAVE_RELIABLE_PIPED_LOGS -D DYNAMIC_MODULE_LIMIT=128 -D HTTPD_ROOT="" -D SUEXEC_BIN="/usr/lib/apache2/suexec" -D DEFAULT_PIDLOG="/var/run/apache2.pid" -D DEFAULT_SCOREBOARD="logs/apache_runtime_status" -D DEFAULT_ERRORLOG="logs/error_log" -D AP_TYPES_CONFIG_FILE="/etc/apache2/mime.types" -D SERVER_CONFIG_FILE="/etc/apache2/apache2.conf" Apache modules loaded: alias.load auth_basic.load authn_file.load authz_default.load authz_groupfile.load authz_host.load authz_user.load autoindex.load cgi.load deflate.load dir.load env.load expires.load fcgid.load headers.load include.load mime.load negotiation.load rewrite.load setenvif.load ssl.load status.load suexec.load PHP info: PHP 5.2.6-3ubuntu4.6 with Suhosin-Patch 0.9.6.2 (cli) (built: Sep 16 2010 19:51:25) Copyright (c) 1997-2008 The PHP Group Zend Engine v2.2.0, Copyright (c) 1998-2008 Zend Technologies

    Read the article

  • Rewriting html links with modproxyperlhtml

    - by Juancho
    I'm trying to setup an Apache reverse proxy using mod_proxy and modproxyperlhtml. This is my scenario: Domain for the proxy: http : // www.myserver.com/ Destination server (the one behind the proxy): http : // myserver.foo.com/myapp/ I'm sorry that I have to space the URL but serverfault doesn't allow me to post more than two links as "spam protection mechanism" (ridiculous on a site where you ask questions about servers and it's really probable to post more than two times the same URL's to explain your question). The idea is to map http : // www.myserver.com/ to http : // myserver.foo.com/myapp/ . Note that the path on the proxy is / and on the destination server is /myapp/. All of the examples I can find on the net (like the one on the official documentation of modproxyperlhtml) are the other way around, ie. path on the proxy /myapp/ and path on the destination server /. This is my current config that doesn't work: ProxyPass / http : // myserver.foo.com/myapp/ ProxyPassReverse / http : // myserver.foo.com/myapp/ PerlInputFilterHandler Apache2::ModProxyPerlHtml PerlOutputFilterHandler Apache2::ModProxyPerlHtml SetHandler perl-script PerlSetVar ProxyHTMLVerbose "On" LogLevel Info <Location / > # ProxyPassReverse /myapp/ PerlAddVar ProxyHTMLURLMap "/myapp/ /" PerlAddVar ProxyHTMLURLMap "http : // myserver.foo.com /" </Location> The examples use the ProxyPassReverse inside the Location directive, but on my case doesn't work, only when outside. With this configuration the links aren't being replaced as they should be, my guess is that the location isn't being found, thus the rewrite rules aren't being applied. The error log only shows that it uncompresses the content, searches it but doesn't find anything: [Tue Nov 13 0842:05 2012] [warn] [ModProxyPerlHtml] Uncompressing text/html; charset=UTF-8, Content-Encoding: gzip\n [Tue Nov 13 08:42:05 2012] [warn] [ModProxyPerlHtml] Content-type 'text/html; charset=UTF-8' match: /(text\\/javascript|text\\/html|text\\/css|text\\/xml|application\\/.*javascript|application\\/.*xml)/is\n [Tue Nov 13 08:42:05 2012] [warn] [ModProxyPerlHtml] Compressing output as Content-Encoding: gzip\n [Tue Nov 13 08:42:06 2012] [warn] [ModProxyPerlHtml] Content-type 'text/html; charset=UTF-8' match: /(text\\/javascript|text\\/html|text\\/css|text\\/xml|application\\/.*javascript|application\\/.*xml)/is\n What could be wrong ?

    Read the article

  • SSLVerifyClient optional with location-based exceptions

    - by Ian Dunn
    I have a site that requires authentication in order to access certain directories, but not others. (The "directories" are really just rewrite rules that all pass through /index.php) In order to authenticate, the user can either login with a standard username/password, or submit a client-side x509 certificate. So, Apache's vhost conf looks something like this: SSLCACertificateFile /etc/pki/CA/certs/redacted-ca.crt SSLOptions +ExportCertData +StdEnvVars SSLVerifyClient none SSLVerifyDepth 1 <LocationMatch "/(foo-one|foo-two|foo-three)"> SSLVerifyClient optional </LocationMatch> That works fine, but then large file uploads fail because of the behavior documented in bug 12355. The workaround for that is to set SSLVerifyClient require (or optional) as the default, so now the conf looks like this SSLCACertificateFile /etc/pki/CA/certs/redacted-ca.crt SSLOptions +ExportCertData +StdEnvVars SSLVerifyClient optional SSLVerifyDepth 1 <LocationMatch "/(bar-one|bar-two|bar-three)"> SSLVerifyClient none </LocationMatch> That fixes the upload problem, but the SSLVerifyClient none doesn't work for bar-one, bar-two, etc. Those directories are still prompted to present a certificate. Additionally, I also need the root URL to accessible without the user being prompted for a certificate. I'm afraid that will cancel out the workaround, though.

    Read the article

  • How to configure apache's mod_proxy_html to work as an ajax proxy?

    - by dcerecedo
    I'm trying to build a web site that let's you view and manipulate data from any page in any other website. To do that, I have to bypass 'Allow Origin' problems: i'm loading the other domain's content in an iframe and i have to manipulate its content with javascript downloaded from my domain. My first attempt was to write a simple proxy myself, requesting the other domains page through a server proxy coded in Java that not only serves the content but rebuilds links (src's and href's) in the content so that the content referenced by these links alse get downloaded through my handmade proxy. The result is not bad but has problems with url's in css and scripts. It's then that i realized that mod_proxy_html is supposed to do exactly all this job. The problem is that i cannot figure out how to make it work as expected. Let's suppose my server runs in my-domain.com and to proxy and transform content from another domain i'd make a request like this: my-domain.com/proxy?url=http://another-domain.com/some/content I'd want mod_proxy_html to serve the content and rewrite following URLs in http://another-domain.com/some/content in the following ways: Absolute URLs not from another-domain.com: no rewritting Relative from root urls:/other/content - /proxy?url=http://another-domain.com/other/content Relative urls: other/content - /proxy?url=http://another-domain.com/some/content/other/content Relative to parent urls: ../other/content - /proxy?url=http://another-domain.com/some/other/content The url should be specified at runtime, not configuration time. Can this be achieved with mod_proxy_html? Could anyone provide a simple working configuration to start with? EDIT 1-First approach The following site config will work fine with sites that use absolute url's everywhere like http://www.huffingtonpost.es/. Youc could try on this config on localhost: http://localhost/asset/http://www.huffingtonpost.es/ <VirtualHost *:80> ServerName localhost LogLevel debug ProxyRequests off RewriteEngine On RewriteRule ^/asset/(.*) $1 [P] ProxyHTMLURLMap $1 /asset/ <Location /asset/> ProxyPassReverse / ProxyHTMLURLMap / /asset/ </Location> </VirtualHost> But as explained in the documentation, if I hit a site using relative url's, I'd like to have these rewritten on the html via mod_proxy_html. So I shoud change the Location block as follows: <Location /asset/> ProxyPassReverse / #Depending on your system use one line or the other #Ubuntu: #SetOutputFilter proxy-html #any other system: ProxyHTMLEnable On ProxyHTMLURLMap / /asset/ </Location> ...which doesn't seem to work. Comments, hints and ideas welcome!

    Read the article

  • Python module being reloaded for each request with django and mod_wsgi

    - by Vishal
    I have a variable in init of a module which get loaded from the database and takes about 15 seconds. For django development server everything is working fine but looks like with apache2 and mod_wsgi the module is loaded with every request (taking 15 seconds). Any idea about this behavior? Update: I have enabled daemon mode in mod wsgi, looks like its not reloading the modules now! needs more testing and I will update.

    Read the article

  • postfix with mailman

    - by Thufir
    What should happen is that [email protected] should be delivered to that users inbox on localhost, user@localhost. Thunderbird works fine at reading user@localhost. I'm just using a small portion of postfix-dovecot with Ubuntu mailman. How can I get postfix to recognize the FQDN and deliver them to a localhost inbox? root@dur:~# root@dur:~# tail /var/log/mail.err;tail /var/log/mailman/subscribe;postconf -n Aug 27 18:59:16 dur dovecot: lda(root): Error: chdir(/root) failed: Permission denied Aug 27 18:59:16 dur dovecot: lda(root): Error: user root: Initialization failed: Initializing mail storage from mail_location setting failed: stat(/root/Maildir) failed: Permission denied (euid=65534(nobody) egid=65534(nogroup) missing +x perm: /root, dir owned by 0:0 mode=0700) Aug 27 18:59:16 dur dovecot: lda(root): Fatal: Invalid user settings. Refer to server log for more information. Aug 27 20:09:16 dur postfix/trivial-rewrite[15896]: error: open database /etc/postfix/transport.db: No such file or directory Aug 27 21:19:17 dur postfix/trivial-rewrite[16569]: error: open database /etc/postfix/transport.db: No such file or directory Aug 27 22:27:00 dur postfix[17042]: fatal: usage: postfix [-c config_dir] [-Dv] command Aug 27 22:29:19 dur postfix/trivial-rewrite[17062]: error: open database /etc/postfix/transport.db: No such file or directory Aug 27 22:59:07 dur postfix/postfix-script[17459]: error: unknown command: 'restart' Aug 27 22:59:07 dur postfix/postfix-script[17460]: fatal: usage: postfix start (or stop, reload, abort, flush, check, status, set-permissions, upgrade-configuration) Aug 27 23:39:17 dur postfix/trivial-rewrite[17794]: error: open database /etc/postfix/transport.db: No such file or directory Aug 27 21:39:03 2012 (16734) cola: pending "[email protected]" <[email protected]> 127.0.0.1 Aug 27 21:40:37 2012 (16749) cola: pending "[email protected]" <[email protected]> 127.0.0.1 Aug 27 22:45:31 2012 (17288) gmane.mail.mailman.user.1: pending [email protected] 127.0.0.1 Aug 27 22:45:46 2012 (17293) gmane.mail.mailman.user.1: pending [email protected] 127.0.0.1 Aug 27 23:02:01 2012 (17588) test3: pending [email protected] 127.0.0.1 Aug 27 23:05:41 2012 (17652) test4: pending [email protected] 127.0.0.1 Aug 27 23:56:20 2012 (17985) test5: pending [email protected] 127.0.0.1 alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases, hash:/var/lib/mailman/data/aliases append_dot_mydomain = no biff = no broken_sasl_auth_clients = yes config_directory = /etc/postfix default_transport = smtp home_mailbox = Maildir/ inet_interfaces = loopback-only mailbox_command = /usr/lib/dovecot/deliver -c /etc/dovecot/conf.d/01-mail-stack-delivery.conf -m "${EXTENSION}" mailbox_size_limit = 0 mailman_destination_recipient_limit = 1 mydestination = dur, dur.bounceme.net, localhost.bounceme.net, localhost myhostname = dur.bounceme.net mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 readme_directory = no recipient_delimiter = + relay_domains = lists.dur.bounceme.net relay_transport = relay relayhost = smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache smtp_use_tls = yes smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) smtpd_recipient_restrictions = reject_unknown_sender_domain, reject_unknown_recipient_domain, reject_unauth_pipelining, permit_mynetworks, permit_sasl_authenticated, reject_unauth_destination smtpd_sasl_auth_enable = yes smtpd_sasl_authenticated_header = yes smtpd_sasl_local_domain = $myhostname smtpd_sasl_path = private/dovecot-auth smtpd_sasl_security_options = noanonymous smtpd_sasl_type = dovecot smtpd_tls_auth_only = yes smtpd_tls_cert_file = /etc/ssl/certs/ssl-mail.pem smtpd_tls_key_file = /etc/ssl/private/ssl-mail.key smtpd_tls_mandatory_ciphers = medium smtpd_tls_mandatory_protocols = SSLv3, TLSv1 smtpd_tls_received_header = yes smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtpd_use_tls = yes tls_random_source = dev:/dev/urandom transport_maps = hash:/etc/postfix/transport root@dur:~# there's definitely a transport problem: root@dur:~# root@dur:~# root@dur:~# grep transport /var/log/mail.log | tail Aug 27 22:29:19 dur postfix/trivial-rewrite[17062]: warning: hash:/etc/postfix/transport lookup error for "[email protected]" Aug 27 22:29:19 dur postfix/trivial-rewrite[17062]: warning: transport_maps lookup failure Aug 27 23:39:17 dur postfix/trivial-rewrite[17794]: error: open database /etc/postfix/transport.db: No such file or directory Aug 27 23:39:17 dur postfix/trivial-rewrite[17794]: warning: hash:/etc/postfix/transport is unavailable. open database /etc/postfix/transport.db: No such file or directory Aug 27 23:39:17 dur postfix/trivial-rewrite[17794]: warning: hash:/etc/postfix/transport lookup error for "*" Aug 27 23:39:17 dur postfix/trivial-rewrite[17794]: warning: hash:/etc/postfix/transport is unavailable. open database /etc/postfix/transport.db: No such file or directory Aug 27 23:39:17 dur postfix/trivial-rewrite[17794]: warning: hash:/etc/postfix/transport lookup error for "*" Aug 27 23:39:17 dur postfix/trivial-rewrite[17794]: warning: hash:/etc/postfix/transport is unavailable. open database /etc/postfix/transport.db: No such file or directory Aug 27 23:39:17 dur postfix/trivial-rewrite[17794]: warning: hash:/etc/postfix/transport lookup error for "[email protected]" Aug 27 23:39:17 dur postfix/trivial-rewrite[17794]: warning: transport_maps lookup failure root@dur:~# trying to add the transport file: EDIT root@dur:~# root@dur:~# touch /etc/postfix/transport root@dur:~# ll /etc/postfix/transport -rw-r--r-- 1 root root 0 Aug 28 00:16 /etc/postfix/transport root@dur:~# root@dur:~# cd /etc/postfix/ root@dur:/etc/postfix# root@dur:/etc/postfix# postmap transport root@dur:/etc/postfix# root@dur:/etc/postfix# cat transport

    Read the article

  • Locate modules by stack address

    - by PaulH
    I have a Winodws Mobile 6.1 application running on an ARMV4I processor. Given a stack address (from unwinding an exception), I like to determine what module owns that address. Using the ToolHelpAPI, I'm able to determine most modules using the following method: HANDLE snapshot = ::CreateToolhelp32Snapshot( TH32CS_SNAPMODULE | TH32CS_GETALLMODS, 0 ); if( INVALID_HANDLE_VALUE != snapshot ) { MODULEENTRY32 mod = { 0 }; mod.dwSize = sizeof( mod ); if( ::Module32First( snapshot, &mod ) ) { do { if( stack_address > (DWORD)mod.modBaseAddr && stack_address < (DWORD)( mod.modBaseAddr + mod.modBaseSize ) ) { // Found the module! // offset = stack_address - mod.modBaseAddr break; } } while( ::Module32Next( snapshot, &mod ) ); } ::CloseToolhelp32Snapshot( snapshot ); } But, I don't always seem to be able to find a module that matches an address. For example: stack address module offset 0x03f65bd8 coredll.dll + 0x0001bbd8 0x785cab1c mylib.dll + 0x0002ab1c 0x785ca9e8 mylib.dll + 0x0002a9e8 0x785ca0a0 mylib.dll + 0x0002a0a0 0x785c8144 mylib.dll + 0x00028144 0x3001d95c ??? 0x3001dd44 ??? 0x3001db90 ??? 0x03f88030 coredll.dll + 0x0003e030 0x03f8e46c coredll.dll + 0x0004446c 0x801087c4 ??? 0x801367b4 ??? 0x8010ce78 ??? 0x801086dc ??? 0x03f8e588 coredll.dll + 0x00044588 0x785a56a4 mylib.dll + 0x000056a4 0x785bdd60 mylib.dll + 0x0001dd60 0x785bbd0c mylib.dll + 0x0001bd0c 0x785bdb38 mylib.dll + 0x0001db38 0x3001db20 ??? 0x3001dc40 ??? 0x3001a8a4 ??? 0x3001a79c ??? 0x03f67348 coredll.dll + 0x0001d348 Where do I find those stack addresses that are missing? Any suggestions? Thanks, PaulH

    Read the article

  • nginx - how do I get rewrite directives to execute before index directives?

    - by Daniel Hai
    I'm trying a simple internal rewrite with nginx to navigate to a sub-directory depending on the user_agent -- mobile browsers go to /mobile, otherwise they go to /www however it seems that when I rewrite these urls, the index directive is processed before the rewrites, so I end up getting 403 forbidden. # TEST FOR INDEX index index.php # TEST PHONES if ($http_user_agent ~* '(iPhone|iPod)') { rewrite ^(.*)$ /mobile$1 break; } # OTHERWISE WE ARE DONE rewrite ^(.*)$ /www$1 break; when I turn off the re-writes and hit the hostname (http://www.somehost.com/) the index is displayed correctly. When they are on, I have to explicitly navigate to somehost.com/index.php to get the script to run ... Do I have to explicity test for directories, and then re-write to an index.php file, or is there a simpler solution?

    Read the article

< Previous Page | 61 62 63 64 65 66 67 68 69 70 71 72  | Next Page >