Search Results

Search found 5000 results on 200 pages for 'partition alignment'.

Page 65/200 | < Previous Page | 61 62 63 64 65 66 67 68 69 70 71 72  | Next Page >

• Can windows XP be better than any Ubuntu (and Linux) distro for an old PC?

  - by Robert Vila

  The old laptop is a Toshiba 1800-100: CPU: Intel Celeron 800h Ram 128 MB (works ok) HDD: 15GB (works ok) Graphics adapter: Integrated 64-bit AGP graphics accelerator, BitBIT, 3D graphic acceleration, 8 MB Video RAM Only WindowsXP is installed, and works ok: it can be used, but it is slow (and hateful). I thought that I could improve performance (and its look) easily, since it is an old PC (drivers and everything known for years...) by installing a light Linux distro. So, I decided to install a light or customized Ubuntu distro, or Ubuntu/Debian derivative, but haven't been successful with any; not even booting LiveCDs: not even AntiX, not even Puppy. Lubuntu wiki says that it won't work because the last to releases need more ram (and some blogs say much more cpu -even core duo for new Lubuntu!-), let alone Xubuntu. The problems I have faced are: 1.There are thousands of pages talking about the same 10/15 lightweight distros, and saying more or less the same things, but NONE talks about a simple thing as to how should the RAM/swap-partition proportion be for this kind of installations. NONE! 2.Loading the LiveCD I have tried several different boot options (don't understand much about this and there's ALWAYS a line of explanation missing) and never receive error messages. Booting just stops at different stages but often seems to stop just when the X server is going to start. I am able to boot to command line. 3.I ignore whether the problem is ram size or a problem with the graphics driver (which surprises me because it is a well known brand and line of computers). So I don't know if doing a partition with a swap partition would help booting the LiveCD. 4.I would like to try the graphical interface with the LiveCD before installing. If doing the swap partition for this purpose would help. How can I do the partition? I tried to use Boot Rescue CD, but it advises me against continuing forward. I would appreciate any ideas as regards these questions. Thank you

  Read the article

• Algorithm to find average position

  - by Simran kaur

  In the given diagram, I have the extreme left and right points, that is -2 and 4 in this case. So, obviously, I can calculate the width which is 6 in this case. What we know: The number of partitions:3 in this case The partition number at at any point i.e which one is 1st,second or third partition (numbered starting from left) What I want: The position of the purple line drawn which is positio of average of a particular partition So, basically I just want a generalized formula to calculate position of the average at any point.

  Read the article

• Why can't windows see mmcblk0p3? [closed]

  - by jacknad

  The partition is created on the embedded linux target like this # n - new # p - partition # 3 - partition 3 # 66 - starting cylinder # <blank> - maximum size for the ending cylinder # t - set file system type # 3 - partition 3 # c - set to windows vfat # w - write partition table and exit echo -e "n\np\n3\n66\n\nt\n3\nc\nw" | fdisk /dev/mmcblk0 The file system is then formatted on the embedded linux target as MS-DOS like this # -n volume-name # -F FAT-size mkfs.vfat -n DB -F 32 /dev/mmcblk0p3 A linux host can mount and access files in mmcblk0p3 without issue. Why can't windows? Edit: Although the default number of FATS is 2 I tried adding -f 2 [number-of-FATs] since this is actually being done by busybox on an embedded platform but this didn't help. I understand the Linux MS-DOS file system does not support more than 2 FATs but there are only 2 on this target (the boot is also FAT which is visible), along with and EXT3 (on p2) for the root file system.

  Read the article

• How to calculate the covariance in T-SQL

  - by Peter Larsson

  DECLARE @Sample TABLE         (             x INT NOT NULL,             y INT NOT NULL         ) INSERT  @Sample VALUES  (3, 9),         (2, 7),         (4, 12),         (5, 15),         (6, 17) ;WITH cteSource(x, xAvg, y, yAvg, n) AS (         SELECT  1E * x,                 AVG(1E * x) OVER (PARTITION BY (SELECT NULL)),                 1E * y,                 AVG(1E * y) OVER (PARTITION BY (SELECT NULL)),                 COUNT(*) OVER (PARTITION BY (SELECT NULL))         FROM    @Sample ) SELECT  SUM((x - xAvg) *(y - yAvg)) / MAX(n) AS [COVAR(x,y)] FROM    cteSource

  Read the article

• Sparse virtual machine disk image resizing weirdness?

  - by Matt H

  I have a partitioned virtual machine disk image created by vmware. What I want to do is resize that by 10GB. The file size is showing as 64424509440. Or 60GB. So I ran this: dd if=/dev/zero of=./win7.img seek=146800640 count=0 It ran without errors and I can verify the new size is in fact 75161927680 bytes or 70GB. This is where it gets a little odd. I started the guest domain in xen which is a Windows 7 enterprise machine. What I was expecting to see in diskmgmt.msc is 2 partitions. 1 system partition at the start of around 100MB and near 60GB partition (which is C drive) followed by around 10GB of free space. Actually what I saw was a 70GB partition!?! That confused me... so I decided to run the Check Disk which when you set it on the C drive it asks you to reboot so it'll run on boot. So I did that and during the boot it ran the checks. It got all the way through stage 3 and didn't show any errors at all. Looked at the partitions in disk manager and now C drive has shrunk back to 60GB and there is no free space. What gives? Ok, I thought I'd try mounting it under Dom0 and examining it with fdisk. This is what I get when mounted sudo xl block-attach 0 tap:aio:/home/xen/vms/otoy_v1202-xen.img xvda w sudo fdisk -l /dev/xvda Disk /dev/xvda: 64.4 GB, 64424509440 bytes 255 heads, 63 sectors/track, 7832 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x582dfc96 Device Boot Start End Blocks Id System /dev/xvda1 * 1 13 102400 7 HPFS/NTFS Partition 1 does not end on cylinder boundary. /dev/xvda2 13 7833 62810112 7 HPFS/NTFS Note the cylinder boundary comment. When I run sudo cfdisk /dev/xvda I get: FATAL ERROR: Bad primary partition 1: Partition ends in the final partial cylinder Press any key to exit cfdisk So I guess this is a bigger problem than first thought. How can I fix this? EDIT: Oops, the cylinder boundary thing is not a problem at all since disks have used LBA etc. So that threw me for a moment... still the problem exists... Now this output looks a little different. sudo sfdisk -uS -l /dev/xvda Disk /dev/xvda: 7832 cylinders, 255 heads, 63 sectors/track Units = sectors of 512 bytes, counting from 0 Device Boot Start End #sectors Id System /dev/xvda1 * 2048 206847 204800 7 HPFS/NTFS /dev/xvda2 206848 125827071 125620224 7 HPFS/NTFS /dev/xvda3 0 - 0 0 Empty /dev/xvda4 0 - 0 0 Empty BTW: I do have a backup of the image so if you help me mess it up that's ok. EDIT: sudo parted /dev/xvda print free Model: Xen Virtual Block Device (xvd) Disk /dev/xvda: 64.4GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 32.3kB 1049kB 1016kB Free Space 1 1049kB 106MB 105MB primary ntfs boot 2 106MB 64.4GB 64.3GB primary ntfs 64.4GB 64.4GB 1049kB Free Space Cool. Linux is showing free space is 10GB which is what I expect. The problem is windows isn't seeing this?

  Read the article

• cant get ubuntu to work with windows 8

  - by John Mark High

  ive been trying to dual boot Ubuntu with windows 8 but so far I haven't been able too. the laptop im using is a HP Pavilion g6-2240sa pre-installed with windows 8. ive made the bootbale USB with Ubuntu 12.10, it installs but when I restart the computer boot straight into windows, no grub boot options. I can get into Ubuntu once by doing an advanced restart and booting from the Ubuntu partition. I can use Ubuntu fine but once I restart or shutdown, I do the advanced restart again and the Ubuntu partition is now gone and I have to reinstall. i used this tutorial to install Ubuntu, http://www.youtube.com/watch?v=wNCSbTyUzoM After i have to reinstall and still no grub boot menu, i used the boot repair to re-install it. once i rebooted the computer it went straight to windows again and the Ubuntu partition was gone. can i dual boot windows 8 and unbuntu 12.10 with the grub so i can pick what OS to boot into when the computer is starting, and without the partition going AWOL???? Thanks in advance

  Read the article

• One of the partion on a usb harddisk cannot automount

  - by holmescn

  It is a very strange problem. My usb harddisk has four partitions, one is primary, the other three are logical (contained within an extended partition). When I plug in the disk, three of the partitions are mounted automatically except one--the first logical partition in the extended partition. Initially I thought it is the problem of system (at that time I used Mint). But after I change to Ubuntu 12.04, the problem wasn't solved. I don't want to add a rule in fstab, and I want to know what happened. The disk is fine, and the partition can be accessed in Windows and mounted manually. result of dmesg | tail: [100933.557649] usb 2-1.2: new high-speed USB device number 4 using ehci_hcd [100933.651891] scsi8 : usb-storage 2-1.2:1.0 [100934.649047] scsi 8:0:0:0: Direct-Access SAMSUNG PQ: 0 ANSI: 0 [100934.650963] sd 8:0:0:0: Attached scsi generic sg2 type 0 [100934.651342] sd 8:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB) [100934.651977] sd 8:0:0:0: [sdb] Write Protect is off [100934.651989] sd 8:0:0:0: [sdb] Mode Sense: 03 00 00 00 [100934.652836] sd 8:0:0:0: [sdb] No Caching mode page present [100934.652848] sd 8:0:0:0: [sdb] Assuming drive cache: write through [100934.655354] sd 8:0:0:0: [sdb] No Caching mode page present [100934.655367] sd 8:0:0:0: [sdb] Assuming drive cache: write through [100934.734652] sdb: sdb1 sdb3 < sdb5 sdb6 sdb7 > [100934.737706] sd 8:0:0:0: [sdb] No Caching mode page present [100934.737725] sd 8:0:0:0: [sdb] Assuming drive cache: write through [100934.737731] sd 8:0:0:0: [sdb] Attached SCSI disk result of parted -l: Model: SAMSUNG (scsi) Disk /dev/sdb: 320GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 32.3kB 21.5GB 21.5GB primary ntfs 3 21.5GB 320GB 299GB extended lba 5 21.5GB 129GB 107GB logical ntfs 6 129GB 236GB 107GB logical ntfs 7 236GB 320GB 83.8GB logical ntfs

  Read the article

• install grub on disk image

  - by Dima

  I have disk image with 2 partitions: Partition 1 has cramfs file system (read only). This partition contains all system files of the OS Partition 2 has ext3 file system. This partition has only configuration files that may be changed. How can I install GRUB1 boot loader on MBR. I tried to copy first 446 bytes of my hard disk and copy GRUB files to the /boot directory on the 1st (cramfs) partition. I cannot use grub-install because I have disk image and not disk itself. Any ideas?

  Read the article

• How to troubleshoot a wireless networking regression?

  - by fluteflute

  I've been experiencing this perhaps slightly odd bug. It works flawlessly in Lucid, but not in Maverick and Natty. I find it seems to work when I'm booting a partition everyday (as I do for my main 10.10 partition) but for my 11.04 testing partition it's a real pain - usually refusing to connect. So given that I have both a working (10.04) and not-working (10.10 and 11.04) installs, how can I troubleshoot my problem?

  Read the article

• Installing Ubuntu on btrfs over multiple drives

  - by Tom Ato

  When I installed Ubuntu 13.04, I managed to combine a couple of outdated askubuntu answers, as well as some of the btrfs documentation in order to figure out how to install Ubuntu over two SSDs using a single btrfs partition (I think /boot was on a small ext4 partition). I want to install Ubuntu 13.10 in a similar way, using a single btrfs partition striping data over the two SSDs, but I don't feel comfortable synthesizing a method that I am sure will work with current software. What is the best way to partition and install Ubuntu over two SSDs using btrfs, in an effectively RAID 0 way?

  Read the article

• Ubuntu installation does not recognize drive partinioning

  - by Woltan

  I have a 1TB drive and installed Windows 7 on a 128GB partition. When I now try to install Ubuntu 11.04 it does not recognize the Windows partition but offers the complete 1TB drive to install Ubuntu on instead. It displays: However, in the Ubuntu Disk Utility the Windows partitions are recognized. What do I need to do in order for Ubuntu to recognize the Windows 7 partition and install Ubuntu as a dual boot? Response to comments The following commands were executed and the results are shown below: fdisk -l WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x34a38165 Device Boot Start End Blocks Id System /dev/sda1 * 1 13 102400 7 HPFS/NTFS Partition 1 does not end on cylinder boundary. /dev/sda2 13 16318 130969600 7 HPFS/NTFS Disk /dev/sdb: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x14a714a6 Device Boot Start End Blocks Id System /dev/sdb1 1 60801 488384001 83 Linux parted -l Warning: Unable to open /dev/sr0 read-write (Read-only file system). /dev/sr0 has been opened read-only. Error: /dev/sr0: unrecognised disk label

  Read the article

• Data Recovery using testDisk failing!

  - by iamcreasy

  I am trying to recover an accidentally formatted partition using testDisk, After selecting the partition[pic 1] and selecting Undeleted[pic 1], it says, No deleted file found.[pic 2] 1 2 I know it's a silly question, but I just want to make sure that those data are really out of reach. Or is there anything I can do to recover them? :( I tried to repair my partition table using bootrec.exe/FixMBR & bootrec.exe/FixBoot, can this be the reason why testdisk can't work anymore? I haven't written anything on that partition. Is there any low level approach to retrieve all the lost data?

  Read the article

• Error loading operating system WinXP Pro

  - by Jakesan

  So im getting the error "Error loading operating system" when the computer tries to boot to a fresh install of WinXP Pro. To get to this point, I: Shrunk the only partition with Gparted to 33GB Copied the partition to the end of the 200GB drive Enlarged the first one to fill the space Formatted the first partition to NTFS Set the first partition to boot, tagged the latter to hidden, removed boot flag This was done all under Hiren's BootCD. Now this is where it goes down the drain. I installed XP Pro SP1a from its CD, and chose to quick format the partition. Now after the OS was installed, I can't start XP without using the default menu action from Hiren's BootCD. All I am greeted with is the "error loading operating system" message. I tried to use the XP recovery to fixboot, fixmbr and bootcfg /rebuild (dont remember if the command was like this, anyway the 3 suggested commands). This did nothing. What am I missing here?

  Read the article

• Optimal Disk Setup for OLTP SQL Server

  - by Chris

  We have a high transaction (lots of reads and writes) database server (running SQL 2005) that is currently set up with a RAID 1 OS partition (C:) and a RAID 5 data/log/tempdb partition (D:). The C: has 2 drives and the D: has 4 drives. The server has around 300 databases ranging from 10MB to 2GB in size. I have been reading up on best practices for partioning the disks, but would like some opinions on our setup since we are so limited in the number of disks. It seems like RAID 10 is popular, but I dont think we could use it with only 6 total disks to work with. Thanks. Update I went with 3 RAID 1 Partitions (2 disks each) Partition 1: OS, TempDB, Backups Partition 2: Logs Partition 3: Data

  Read the article

• Operating System not Found after installing Ubuntu in a Sony Vaio

  - by diego8arock

  I just bought a Sony Vaio SVS15115FLB that came with Windows 7, after enjoying the PC graphic power for a little, I decided it was time to install Ubuntu 12.04. First, I inserted a USB stick, reboot, press F11 but a message saying that no OS was found on the USB, so then I used a live CD. It booted fine and I installed Ubuntu, then when it was time to restart the PC, it didn't boot to GRUB but it went straight to Windows and it began an startup error and was looking for a solution, after it was done, it restarted and then it booted again to Windows and to the same start up error solution thing. I freaked out, so I booted again the Ubuntu live CD, and installed Ubuntu over everything, after it installed I rebooted and then a message appeared saying Operating system Not Found, and I have no idea why. So I Googled again and found this post on Boot Partition, I did everything exactly on that post, but it didn't work (by the way, this was the message): The boot files of [Ubuntu 12.04 LTS] are far from the start of the disk. Your BIOS may not detect them. You may want to retry after creating a /boot partition (EXT4, >200MB, start of the disk). This can be performed via tools such as gParted. Then select this partition via the [Separate /boot partition:] option of [Boot Repair]. It appeared the first time, then I did it all again and then it was gone. I rebooted and nothing, the same Operating System not found message appeared. So I decided to create a partition for Windows, hoping for something, but the message still appears. I really have no idea what to do, but there is something odd, if I insert the USB stick containing Ubuntu 11.10, the message that says that there is no OS in the PendDrive flashes for a fraction of a second and the boot straight to Ubuntu 12.04 without problems (and booted to Windows when I installed it, ignoring Ubuntu), right now I'm using it like that, but its pretty annoying. Can anyone advise me how to fix this? I'm no expert on this kind of things (boot, GRUB, recovery and stuff like that).

  Read the article

• How do I create a new usergroup?

  - by Sergiu

  I want to do this because I'm trying to fix user permissions from Ubuntu on my Mac OS X partition and Ubuntu doesn't have the "wheel" group that I so desperately need! Please don't trash me for this but I set my whole Mac OS X partition to give read and write access to everyone so I could access and modify everything on it from my dual-booting Ubuntu OS, and now everything is screwed... I don't have the original Mac OS X installation DVD and booting a Mac OS X 10.5.6 DVD gives me kernel panics... The OS installed on that Mac partition is 10.4.11. Is there any hope for me to ever fix it? I don't have money to buy utilities, and I can't use AppleJack either because my permissions are so messed up... None of the posted answers are what I wanted to do. I wanted to add fields to a user that was on my Mac partition, not a user part of the Ubuntu groups. Is that possible?

  Read the article

• Macbook Pro (2011) Install of 12.10

  - by William Fleming

  I have installed Ubuntu on another partition on my macbook only to find when i boot using refit im greeted with a screen that reads Missing Operating System I have chosen to install grub on the root partition so i assume after the EFI boot-loader has done its stuff it will then load grub in the " / " partition. Any thoughts on this i couldn't find anyone with this problem. I can only assume its a problem with the GRUB install on the partition. But i have tried to reinstall it and it did not work....? Any thoughts would greatly appreciated. Bill

  Read the article

• Install ubuntu with Win7

  - by 123Ex

  I'm using windows 7, Now I need to install Ubuntu 11.04 to the my lap top, I want keep win7 in my lap, I'm planing to keep dual boot system on my lap, I want to install Ubuntu on separate partition, I have deleted my windows empty partition to allocate the space to Ubuntu but when I'm proceeding with installation in Ubuntu, I couldn't recognize the empty partition, Ubuntu shows my full hard disk space one 50GB partition to install, I couldn't recognize the 50GB partition, can anyone tell me how to install Ubuntu on my lap. I really appreciate it, I want to install Ubuntu without loosing my existing data, to do that I have allocated empty unlocated disk space. Thank you in advance!

  Read the article

• i have xp partitioned and formatted fat32 it says it needs to be bootable to install ubuntu how do i do that? [duplicate]

  - by Rob Bailey

  This question already has an answer here: How do I install Ubuntu? 4 answers I have partitioned the hard drive and formatted it fat 32 as it is only 16gig. I have just read that I should not partition the hard drive so I have deleted the partition, I noticed that if i re-partition it my options would be NTFS, Fat32 or exfat. I tried to install ubuntu 12.10 but it flashed up something along the lines of the partition is not bootable and it must be for ubuntu to install. I know my copy works as a friend installed it over his copy of windows and it works perfect, I have ubuntu on my flashdrive, I want to run it along side xp.

  Read the article

• Creating an Ubuntu live USB for use with Gparted

  - by Jeff

  I've install Ubuntu 12.04 on my Windows 7 Dell laptop. Recently I discovered that I'm running out of space on my Ubuntu partition, and I would like to enlarge it. Is it safe to resize partitions while they're in use e.g. when I'm logged into Ubuntu? If so, I've ran into this problem when I run GParted: It seems as if my hard drive is one big, NTFS partition, like the Ubuntu partition doesn't exist. Is it possible Ubuntu runs off the NTFS partition, sharing it with Windows? What should I do?

  Read the article

• Implementing a Custom Coherence PartitionAssignmentStrategy

  - by jpurdy

  A recent A-Team engagement required the development of a custom PartitionAssignmentStrategy (PAS). By way of background, a PAS is an implementation of a Java interface that controls how a Coherence partitioned cache service assigns partitions (primary and backup copies) across the available set of storage-enabled members. While seemingly straightforward, this is actually a very difficult problem to solve. Traditionally, Coherence used a distributed algorithm spread across the cache servers (and as of Coherence 3.7, this is still the default implementation). With the introduction of the PAS interface, the model of operation was changed so that the logic would run solely in the cache service senior member. Obviously, this makes the development of a custom PAS vastly less complex, and in practice does not introduce a significant single point of failure/bottleneck. Note that Coherence ships with a default PAS implementation but it is not used by default. Further, custom PAS implementations are uncommon (this engagement was the first custom implementation that we know of). The particular implementation mentioned above also faced challenges related to managing multiple backup copies but that won't be discussed here. There were a few challenges that arose during design and implementation: Naive algorithms had an unreasonable upper bound of computational cost. There was significant complexity associated with configurations where the member count varied significantly between physical machines. Most of the complexity of a PAS is related to rebalancing, not initial assignment (which is usually fairly simple). A custom PAS may need to solve several problems simultaneously, such as: Ensuring that each member has a similar number of primary and backup partitions (e.g. each member has the same number of primary and backup partitions) Ensuring that each member carries similar responsibility (e.g. the most heavily loaded member has no more than one partition more than the least loaded). Ensuring that each partition is on the same member as a corresponding local resource (e.g. for applications that use partitioning across message queues, to ensure that each partition is collocated with its corresponding message queue). Ensuring that a given member holds no more than a given number of partitions (e.g. no member has more than 10 partitions) Ensuring that backups are placed far enough away from the primaries (e.g. on a different physical machine or a different blade enclosure) Achieving the above goals while ensuring that partition movement is minimized. These objectives can be even more complicated when the topology of the cluster is irregular. For example, if multiple cluster members may exist on each physical machine, then clearly the possibility exists that at certain points (e.g. following a member failure), the number of members on each machine may vary, in certain cases significantly so. Consider the case where there are three physical machines, with 3, 3 and 9 members each (respectively). This introduces complexity since the backups for the 9 members on the the largest machine must be spread across the other 6 members (to ensure placement on different physical machines), preventing an even distribution. For any given problem like this, there are usually reasonable compromises available, but the key point is that objectives may conflict under extreme (but not at all unlikely) circumstances. The most obvious general purpose partition assignment algorithm (possibly the only general purpose one) is to define a scoring function for a given mapping of partitions to members, and then apply that function to each possible permutation, selecting the most optimal permutation. This would result in N! (factorial) evaluations of the scoring function. This is clearly impractical for all but the smallest values of N (e.g. a partition count in the single digits). It's difficult to prove that more efficient general purpose algorithms don't exist, but the key take away from this is that algorithms will tend to either have exorbitant worst case performance or may fail to find optimal solutions (or both) -- it is very important to be able to show that worst case performance is acceptable. This quickly leads to the conclusion that the problem must be further constrained, perhaps by limiting functionality or by using domain-specific optimizations. Unfortunately, it can be very difficult to design these more focused algorithms. In the specific case mentioned, we constrained the solution space to very small clusters (in terms of machine count) with small partition counts and supported exactly two backup copies, and accepted the fact that partition movement could potentially be significant (preferring to solve that issue through brute force). We then used the out-of-the-box PAS implementation as a fallback, delegating to it for configurations that were not supported by our algorithm. Our experience was that the PAS interface is quite usable, but there are intrinsic challenges to designing PAS implementations that should be very carefully evaluated before committing to that approach.

  Read the article

• Activate swap by default

  - by San

  I installed Ubuntu 11.04 Natty and I set a partition for swap about 900 MB. Afterthat, I installed Kubuntu 12.10 Quantal, repartitioned my hard disk so I had 2048 MB swap (replaced 900 MB swap partition). I ran Kubuntu, and it's ok. But after I ran Ubuntu 11.04 Natty, It didn't use that swap. But I can activate it with Gparted. Some additional information. When I installed Kubuntu Quantal. I make 256 MB partition (ext4 mount point in /boot) which replaced previous 256 MB partition (ext4 mount point in /boot) that I created when I installed Natty. Something wrong with my configuration?.

  Read the article

• Really weird situation with Swap that refuses to work

  - by Ghost

  So I decide to move my Swap partition to another HDD to make hibernation more fast, I create a partition with a liveUSB, do swapon, and then hibernate just disappears I go into the terminal, reactivate hibernate (so the button shows) for some reason the swap wasn't "on" so I do swapon again. Still not working. I go back to the terminal and edit the file with the UUID of the new swap partition. The partition shows as swap on gparted, it's on, the file has the right UUID, even the task manager shows a swap area of 10GB, and there is a hibernate button on the shutdown window. But it-wont-hibernate! What's going on?

  Read the article

• Fresh install of 64 bit 12.04 over 32 bit 11.10 alongside Windows 7

  - by Pareen

  I currently have Ubuntu 11.10 32 bit and Windows 7 dual boot in separate partitions. I am trying to do a fresh install of Ubuntu 12.04 64 bit (mistakenly installed the 32 bit 11.10 a little while ago.. I need a 64 bit version to support AOSP build) OVER my the exisiting 11.10 partition. I have referenced How to Install fresh 12.04 install to a PC with dual booting Windows 7 & Ubuntu11.10?, as well as other posts on using the Live CD to do a fresh install. However, the problem I am experiencing is when I bring up the install screen, it says the following: This computer has multiple operating systems on it. What would you like to do. (3 options) Install Ubuntu 12.04 alongside them Replace all with Ubuntu 12.04 (Warning, this will delete files across ALL operating systems) Something else (you can create or resize partitions yourself) This is different from what is in other posts, as mine states that there are "multiple O.Ses" and doesnt individually allow me to replace the Ubuntu 11.10. I don't want to replace ALL O.S.es: I need to preserve Windows 7 and am only trying to replace the old Ubuntu 11.10 partition with the new 12.04 64 bit. I did have Ubuntu installed via Wubi (I believe it was 10.04) prior to putting 11.10 in a separate partition, but I have removed it via Add/Remove programs in Windows. I was wondering how to go about doing this... Should I use the "Something else" option to bring up the partition manager, and just assign my existing 11.10 partition with root mount point + swap space. Will this do the same thing by overwriting with fresh 12.04 install?? I appreciate all your help.

  Read the article

• /dev/sda2 contains a filesystem with error after partitioning

  - by Private

  I just wanted to create a separate home partition on my Ubuntu 12.10 system. I booted the liveDVD, resized the sda2 partition (28gb of data resized to 30gb based on MiB [originally on a 100gb partition]) and made a new ext4 partition for the home folder. The drive is an SSD drive. I had changed the settings (noatime etc.) for SSD succesfully a week ago. On reboot I get the following error: /dev/sda2 contains a filesystem with errors Inode 74669 has an invalid extent node (blk 6881289) fsd / [953] terminated with status 4 What would you suggest me to do? If I can avoid a clean install that would save me a lot of time (I had just done all the config). I was following this HOWTO, but I did not get to changing any of the files or configs other than those with gparted. I have a (two-week old) SSD Samsung drive which is functioning just fine (other specs see bottom of this question). Other specs: 64bit 12.10, i7, 8gb ram, nvidia.

  Read the article

< Previous Page | 61 62 63 64 65 66 67 68 69 70 71 72  | Next Page >