Search Results

Search found 5226 results on 210 pages for 'pg hba conf'.

Page 65/210 | < Previous Page | 61 62 63 64 65 66 67 68 69 70 71 72  | Next Page >

• 12.04 No Sound - ALC888 / Radeon 3200HD

  - by Ross

  Evening all. I have a MSI U230 netbook, MV40 processor, 4Gb RAM with integrated ATI Radeon 3200HD grahics & an ALC888 codec integrated soundcard. It has HDMI out as well. I've tried a few distro's and have been around linux for a short time. I reckon I've settled on Ubuntu 12.04 (32bit) due to it doing pretty much everything I want it to. I'm working with a fresh install right now. I recently re-installed when I was going in circles trying to solve my problem before. I install Ubuntu and it works, except for the sound. I have tried things like reinstalling Alsa, editing my asound.conf file, installing HDA Verb and a few other things. Its at the point where I need to ask for help... Some outputs: ross@ross:~$ aplay -l ** List of PLAYBACK Hardware Devices ** card 0: SB [HDA ATI SB], device 0: ALC888 Analog [ALC888 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: HDMI [HDA ATI HDMI], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 ross@ross:~$ uname -r 3.2.0-34-generic-pae ross@ross:~$ lspci | grep VGA 01:05.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RS780M/RS780MN [Mobility Radeon HD 3200 Graphics] ross@ross:~$ lspci | grep Audio 00:14.2 Audio device: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) 01:05.1 Audio device: Advanced Micro Devices [AMD] nee ATI RS780 HDMI Audio [Radeon HD 3000-3300 Series] Added options snd-hda-intel position_fix=1 to alsa-base.conf file Unmuted all in alsamixer Can anyone suggest anything more?

  Read the article

• mdadm: breaks boot due to "is not ready yet or not present" error

  - by BarsMonster

  This is so damn frustrating :-| I've spent like 20 hours on this nice error, and seems like dozens of people over Internet too, and no clear solution yet. I have non-system RAID-5 of 5 disks, and it's fine. But during boot up it says that "/dev/md0 is not ready yet or not present" and asks to press 'S'. Very nice for Ubuntu Server - I have to bring monitor and keyboard to go next. After this system boots and it's all fine. md0 device works, /proc/mdstat is fine. When I do mount -a - it mounts this array without errors and works fine. As a dumb and shameful workaround I added noauto in /etc/fstab, and did mounting in /etc/rc.local - it works fine then. Any hints how to make it work properly? fstab: UUID=3588dfed-47ae-4c32-9855-2d69df713b86 /var/bigfatdisk ext4 noauto,noatime,data=writeback,barrier=0,nobh,commit=5 0 0 mdadm config: It is autogenerated: # mdadm.conf # # Please refer to mdadm.conf(5) for information about this file. # # by default, scan all partitions (/proc/partitions) for MD superblocks. # alternatively, specify devices to scan, using wildcards if desired. DEVICE partitions # auto-create devices with Debian standard permissions CREATE owner=root group=disk mode=0660 auto=yes # automatically tag new arrays as belonging to the local system HOMEHOST <system> # instruct the monitoring daemon where to send mail alerts MAILADDR CENSORED # definitions of existing MD arrays ARRAY /dev/md/0 metadata=1.2 bitmap=/var/md0_intent UUID=efccbeb6:a0a65cd6:470dcdf3:62781188 name=LBox2:0 # This file was auto-generated on Mon, 10 Jan 2011 04:06:55 +0200 # by mkconf 3.1.2-2

  Read the article

• OSB and Ubuntu 10.04 - Too Many Open Files

  - by jeff.x.davies

  When installing the latest Oracle Service Bus (11gR1PS3) onto my Ubuntu 10.04 system, the Eclipse IDE was complaining about there being too many open files. The Oracle Service Bus and the Oracle Enterprise Pack for Eclipse (aka OEPE) do make use of ALOT of files. By default, Ubuntu will restrict each user to 1024 open files. A much more realistic number for OSB development is 4096. Changing the file limit in Ubuntu is fairly simple (if arcane). You will need to modify two different files and then restart your server. First, you need to modify the limits.conf file as the root user. Open a terminal window and enter the following command: sudo gedit /etc/security/limits.conf Add the following 2 lines to the file. The asterisk simply means that the rule will apply to all users. * soft nofile 4096 * hard nofile 4096 Save your changes and close gedit. The second file to change is the common-session file. Use the following command: sudo gedit /etc/pam.d/common-session Add the following line: session required pam_limits.so Save the file and exit gedit. Restart your machine. You shouldn't have any more problems with too many open files anymore.

  Read the article

• Cannot set monitor to native resolution

  - by S B

  problem is similar to so many other users, but solutions found do not work. Background: Fresh install of 12.04 (completely updated) on a Fit-PC2 (specs). Read in several places that the new 3.X kernel that 12.04 runs on has a new psb_gfx driver which supports the gma500 graphics card (poulsbo chipset). All's pretty much working (there are some glitches which are documented, so I won't raise them here), except for the screen resolution. My native monitor resolution is 1920X1080, but all I get is 1024x768. Output running xrandr: xrandr: Failed to get size of gamma for output default Screen 0: minimum 1024 x 768, current 1024 x 768, maximum 1024 x 768 default connected 1024x768+0+0 0mm x 0mm 1024x768 0.0* Although I read that Ubuntu does not come with an xorg.conf file anymore, I also tried running sudo X :1 -configure, and here's the end of the output: Number of created screens does not match number of detected devices. Configuration failed. When I look in the xorg.conf.new file created in my home directory, it seems that for some reason X thinks I have two screens. Don't know what to do with that. Ideas anyone? Thanks for your time.

  Read the article

• Why is Samba Access from Windows So Slow?

  - by swalker2001

  I have set up a file server using Ubuntu 12.04 Server. The purpose is to serve several network drives to Windows users that have heretofore been served by numerous NAS drives. I have Samba set up with one share defined so far. I can connect to it fine from my test Windows 7 and Windows XP machines. When I do a directory listing on the share from Windows, it can take up to two minutes to get all the files listed--would have taken about 1.5 seconds when I was using the Buffalo NAS. Sometimes it times out with no response at all. I have used the default smb.conf and simply added the following for the share I have set up so far: [engineering] comment = Ubuntu File Server Share path = /networkdriveshares/engineering browsable = yes guest ok = yes read only = no create mask = 0755 I have tried changing the workgroup setting to the Active Domain name our Windows computer use but didn't notice any difference. The only other change I made to the default smb.conf was adding in the recommended socket settings: SO_RCVBUF=8192 SO_SNDBUF=8192 socket options = TCP_NODELAY Lots of information about slow Samba shares online but I have tried all of the solutions I have found and none have made a lick of difference. If there is no solution, is there a better way to set up a file server to be used by Windows clients?

  Read the article

• lirc_zilog IR transmission no longer working with HD-PVR on 12.04

  - by johnf

  I have been running a ubuntu 10.04 with a patched version of lirc_zilog for two years. I upgraded to 12.04 and lirc_zilog is no longer working with my HD-PVR. The MythTV wiki reports that it did work out of the box with 11.04. The error message I get on irsend is as follows: johnf@carbon:~$ /usr/local/bin/irsend SEND_ONCE blaster 0_130_KEY_POWER irsend: command failed: SEND_ONCE blaster 0_130_KEY_POWER irsend: hardware does not support sending The lircd daemon, run interactively, reports the following: lircd: accepted new client on /var/run/lirc/lircd lircd: could not get hardware features lircd: this device driver does not support the LIRC ioctl interface lircd: major number of /dev/lirc0 is 250 lircd: LIRC major number is 61 lircd: check if /dev/lirc0 is a LIRC device lircd: WARNING: Failed to initialize hardware lircd: error processing command: SEND_ONCE blaster 0_130_KEY_POWER lircd: hardware does not support sending lircd: removed client Checking dmesg seems to indicate that the kernel module is loading properly: [56497.730743] lirc_zilog: module is from the staging directory, the quality is unknown, you have been warned. [56497.730999] lirc_zilog: Zilog/Hauppauge IR driver initializing [56497.732484] lirc_zilog: ir_probe: ir_rx_z8f0811_hdpvr on i2c-0 (Hauppage HD PVR I2C), client addr=0x71 [56497.732493] lirc_zilog: ir_probe: ir_tx_z8f0811_hdpvr on i2c-0 (Hauppage HD PVR I2C), client addr=0x70 [56497.732496] lirc_zilog: probing IR Tx on Hauppage HD PVR I2C (i2c-0) [56497.756822] lirc_zilog: firmware of size 302355 loaded [56497.756945] lirc_zilog: 743 IR blaster codesets loaded [56497.757030] i2c i2c-0: lirc_dev: driver lirc_zilog registered at minor = 0 [56497.757033] lirc_zilog: IR unit on Hauppage HD PVR I2C (i2c-0) registered as lirc0 and ready [56497.757035] lirc_zilog: probe of IR Tx on Hauppage HD PVR I2C (i2c-0) done [56497.757056] lirc_zilog: initialization complete Here is my /etc/lirc/hardware.conf #Chosen IR Transmitter TRANSMITTER="HD-PVR" TRANSMITTER_MODULES="lirc_dev lirc_zilog" TRANSMITTER_DRIVER="" TRANSMITTER_DEVICE="/dev/lirc0" TRANSMITTER_SOCKET="" TRANSMITTER_LIRCD_CONF="" TRANSMITTER_LIRCD_ARGS="" My lircd.conf is a copy of the recommended one. Examination of the kernel source seems to indicate that the lirc_zilog module should support transmission, it's newer than the patched version I was manually compiling on 10.04. I was previously using a manually built version of lirc 0.8.7 and not the packaged one. I'm now running the packaged version 9.0. I can provide any additional information required and will perform tests quickly. I'm very eager to get this issue resolved.

  Read the article

• Dell XPS 15 L502x and Ubuntu 11.04 - HDMI output

  - by Jones

  Recently I've bought my dream's notebook, a Dell XPS 15 but since then this dream became a kind of endless nightmare. I'm almost getting crazy to make my graphic card driver work properly, but it seems to be just impossible. Yes, I have a 2GB NVIDIA GeForce GT 540m (Optimus) in it! It simply doesn't work. Every time I generate the xorg.conf Ubuntu hangs on while starting up, which forces me to remove this file to be able to start the notebook with the standard graphic settings. Another problem is that the Dell XPS 15 does NOT have a VGA output, but a HDMI. So, to be able to use a second monitor I have to configure it by the NVIDIA X Server Settings, which just works if the driver is properly initialized with the xorg.conf. I've also tried to make it work with the Bumblebee, but unfortunately it didn't help me much with the HDMI output. Do you guys have any idea to solve this deadlock? Is there any way for me to use my second monitor?

  Read the article

• Ubuntu 12.04 freezes when booting

  - by Agustín González

  Translated I installed Ubuntu 12.04 LTS from the LiveCD, after finalizing the installation process and booting correctly, I applied the pending updates, which asked me to reboot. After rebooting, an error appeared saying "Out of Range". I pressed CTRL+ALT+F1, login to the tty1 terminal and edit the xorg.conf file and add VertRefresh 50.0 - 60.0 to it, which would solve the "Out of Range" problem that was mentioned before. After applying the changed and rebooting again, the following boot screen is all I see now: It freezes there. I even waited 2 hours and nothing happened. Can anybody help? Thank you! Original Instale Ubuntu 12.04 LTS desde el Live CD, al finalizar la instalación inicio el sistema operativo e inicia correctamente, después de aplicar actualizaciones me solicita reiniciar en lo cual acepto. Al volver a iniciar me daba un erro de "Fuera de rango", aprieto CTRL + ALT + F1, me logueo y edito el archivo xorg.conf en la sección Screen y agrego "VertRefresh 50.0 - 60.0", lo cual solucionaría el problema de "Fuera de rango", al aplicar los cambios, vuelvo a iniciar y solamente me aparece la pantalla de inicio (Véase imagen: http://t.bb/fH) y queda colgado, lo deje por lo menos 2 horas así y nada sucedió. ¿Alguien puede ayudarme? Gracias!

  Read the article

• lxc containers fail to autoboot in 14.04 trusty using 'lxc.start.auto = 1'

  - by user273046

  In trusty 14.04 containers fail to autoboot despite all settings being set as 14.04 requires. They show all as STOPPED I have correctly configured 2 LXC containers: calypso encelado They run perfectly if I run sudo lxc-autostart then sudo lxc-ls --fancy results in: ubuntu@saturn:/etc/init$ sudo lxc-ls --fancy NAME STATE IPV4 IPV6 AUTOSTART calypso RUNNING 192.168.1.161 - YES encelado RUNNING 192.168.1.162 - YES The problem is trying to run them at boot. I have at: /var/lib/lxc/calypso/config: # Template used to create this container: /usr/share/lxc/templates/lxc-download # Parameters passed to the template: # For additional config options, please look at lxc.conf(5) # Distribution configuration lxc.include = /usr/share/lxc/config/ubuntu.common.conf lxc.arch = x86_64 # Container specific configuration lxc.rootfs = /var/lib/lxc/calypso/rootfs lxc.utsname = calypso # Network configuration lxc.network.type = veth lxc.network.flags = up #lxc.network.link = lxcbr0 lxc.network.link = br0 lxc.network.hwaddr = 00:16:3e:64:0b:6e # Assegnazione IP Address lxc.network.ipv4 = 192.168.1.161/24 lxc.network.ipv4.gateway = 192.168.1.1 # Autostart lxc.start.auto = 1 lxc.start.delay = 5 lxc.start.order = 100 and I have LXC_AUTO="false" as required inside /etc/default/lxc: LXC_AUTO="false" USE_LXC_BRIDGE="false" # overridden in lxc-net [ -f /etc/default/lxc-net ] && . /etc/default/lxc-net LXC_SHUTDOWN_TIMEOUT=120 Any idea on why the containers don't start at boot? At reboot they are always in the STOPPED state: ubuntu@saturn:~$ sudo lxc-ls --fancy NAME STATE IPV4 IPV6 AUTOSTART calypso STOPPED - - YES encelado STOPPED - - YES and then again they can be started manually, using sudo lxc-autostart

  Read the article

• Ubuntu 12.10 ATI Driver 12.11 fails after compiz and xorg update

  - by Lukasz W.

  I updated my system via the package manager from Unity and next restart was just blackness. After being here: http://linux.hootip.com/amd-catalyst-12-11-beta-fix-and-installation-the-drivers-on-ubuntu-12-11/ I had the Catalyst 12.11 Beta driver installed. I checked my /var/log/apt/history.log and the update I received was of compiz and xorg packages. I tried to get latest release info, but all I get from their pages are commit info; I can't tell what was n the package update I got served. Anyone knows what was in the latest xorg/compiz release that broke the driver? Which driver should I use now? For completeness this is how I got the system back to boot (probably lame and not elegant): Boot with GRUB selection "More Ubuntu options (or sth like that), From secondary screen select 3.5.0-19 with boot options, When system prompts on stuff you'd like to do, select "root" - Drop to root shell, There: # mount -o remount,rw / # mv /etc/X11/xorg.conf /etc/X11/xorg.conf.failed # /usr/share/ati/fglrx-uninstall.sh # reboot This got be back on my feet.

  Read the article

• Nvidia dual monitor configuration gets lost every time I reboot

  - by sunwukung

  I've recently updated (well, borked then completely reinstalled) to 12.04. I'm running a dual monitor setup, with a Dell U2410 / Dell 2007WFP combination on an HP Elite Book 8560W. The graphics card is an NVIDIA GF108 [Quadro 1000M]. My problem is as follows. I can get the dual monitor setup working fine, but every time I reboot, my machine appears to lose the settings (specifically, the U2410 is disabled, the mouse pointer is locked in the launcher). I have to restate the settings after every launch. I've tried running nvidia-settings as sudo, I've save the changes to my xorg.conf file (see below) but nothing seems to be sticking. Has anyone had similair issues, or know of a fix? Conf file follows: # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 295.33 (buildd@allspice) Fri Mar 30 15:25:24 UTC 2012 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "DELL 2007WFP" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 76.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro 1000M" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "1" Option "TwinViewXineramaInfoOrder" "DFP-1" Option "metamodes" "CRT: 1680x1050 +1920+0, DFP-1: 1920x1200 +0+0; CRT: nvidia-auto-select +0+0, DFP-1: NULL" SubSection "Display" Depth 24 EndSubSection EndSection The error message I'm getting is this: none of the selected modes were compatible with the possible modes: Trying modes for CRTC 642: CRTC 642: trying mode 3600x1080@50hz with output at 1280 x 1024@0Hz (pass 0) CRTC 642: trying mode 3600x1080@50hz with output at 1280 x 1024@0Hz (pass 0) CRTC 642: trying mode 3600x1080@50hz with output at 1280 x 1024@0Hz (pass 0) CRTC 642: trying mode 3600x1080@50hz with output at 1280 x 1024@0Hz (pass 1) CRTC 642: trying mode 3600x1080@50hz with output at 1280 x 1024@0Hz (pass 1) CRTC 642: trying mode 3600x1080@50hz with output at 1280 x 1024@0Hz (pass 1)

  Read the article

• mdadm: brakes boot due to "is not ready yet or not present" error

  - by BarsMonster

  This is so damn frustrating :-| I've spent like 20 hours on this nice error, and seems like dozens of people over Internet too, and no clear solution yet. I have non-system RAID-5 of 5 disks, and it's fine. But during boot up it says that "/dev/md0 is not ready yet or not present" and asks to press 'S'. Very nice for Ubuntu Server - I have to bring monitor and keyboard to go next. After this system boots and it's all fine. md0 device works, /proc/mdstat is fine. When I do mount -a - it mounts this array without errors and works fine. As a dumb and shameful workaround I added noauto in /etc/fstab, and did mounting in /etc/rc.local - it works fine then. Any hints how to make it work properly? fstab: UUID=3588dfed-47ae-4c32-9855-2d69df713b86 /var/bigfatdisk ext4 noauto,noatime,data=writeback,barrier=0,nobh,commit=5 0 0 mdadm config: It is autogenerated: # mdadm.conf # # Please refer to mdadm.conf(5) for information about this file. # # by default, scan all partitions (/proc/partitions) for MD superblocks. # alternatively, specify devices to scan, using wildcards if desired. DEVICE partitions # auto-create devices with Debian standard permissions CREATE owner=root group=disk mode=0660 auto=yes # automatically tag new arrays as belonging to the local system HOMEHOST <system> # instruct the monitoring daemon where to send mail alerts MAILADDR CENSORED # definitions of existing MD arrays ARRAY /dev/md/0 metadata=1.2 bitmap=/var/md0_intent UUID=efccbeb6:a0a65cd6:470dcdf3:62781188 name=LBox2:0 # This file was auto-generated on Mon, 10 Jan 2011 04:06:55 +0200 # by mkconf 3.1.2-2

  Read the article

• Ubuntu 12.04.1 LTS and Nvidia dirver (304.51) 64bit: problem 640x480

  - by nibianaswen

  I have a problem with this configuration: Asus K55V, Ubuntu 12.04 LTS and Nvidia driver 304.51. I have remove the nouveau driver with: apt-get --purge remove xserver-xorg-video-nouveau I installed the official nvidia driver (from www.nvidia.com) but when I reboot the PC the resolution of screen is only 640x480 and the monitor is resized. Mo solution at this problem if i change the xorg.conf. Now i have uninstall the nvidia driver and reinstall with sudo apt-get purge nvidia-current sudo apt-add-repository ppa:ubuntu-x-swat/x-updates sudo apt-get update sudo apt-get install nvidia-current When I reboot the screen resolution and size is OK, but if I start nvidia-setting I received the message: You do not appear to be using the NVIDIA X driver. and with command: sudo lshw -c display | grep driver I received configuration: driver=i915 latency=0 This sound like the system is using the Intel card. When I launch command lspci | grep VGA the output is: 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) 01:00.0 VGA compatible controller: NVIDIA Corporation Device 1058 (rev ff) And there is no /etc/X11/xorg.conf. I have read a lot of guides on internet but without success.. How i can use nvidia card with the driver that i have installed?

  Read the article

• JEOS

  - by john.graves(at)oracle.com

  JEOS stands for Just Enough Operating System.  It is  great environment for building virtual machines without all the clutter of a windowing system, games, office products, etc.  It is from Ubuntu and you install it using the Ubuntu server install, but rather than picking a standard install, press F4 and choose “Install a minimal system.” Note: The “Install a minimal virtual machine” is specific to VMWare and I plan to use VirtualBox. Be sure to include Open SSH in the install so that it installs sshd. *** Also, if you plan to install XE, you’ll need to modify the partitions to have a larger swap space (at least 1.5 G). *** Once the install is done, I find it useful to install a few other items. Update Ubuntu apt-get update Install some other tools apt-get openjdk-6-jre Yes, java will be included in any of the WebLogic installs, but I need this one if I want to do remote display (for config wizards, etc). apt-get gcc Some apps require to rebuild the kernel modules, so you’ll need a basic compiler. Install guest additions (Choose the VirtualBox Devices->Install Guest Additions…” option.  This sets up a /dev/cdrom or /dev/cdrom1.  You’ll need to manually mount this temporarily: sudo mount /dev/cdrom /mnt Then run the linux .bin file. Update nofile limits.  Most java apps fail with the standard ubuntu settings: edit /etc/security/limits.conf and add these lines at the end: *     soft nofile 65535 *     hard nofile 65535 root  soft nofile 65535 root  hard nofile 65535 These numbers are very high and I wouldn’t do this on a production system, but for this environment it is fin. To get rid of the annoying piix error on boot, add the following line to the /etc/modprobe.d/blacklist.conf file blacklist i2c_piix4

  Read the article

• Subdomain redirect to WWW

  - by manix

  I have the domain example.com and the test.example.com running on apache server. For some reason when I try to visit test.example it is redirected to www.test.example and by consequence a Server not found error is displayed in the browser. Both .htaccess (root and subdomain folder) files are empty. Additional facts I have another subdomain xyz.example.com pointed to public_html/xyz directory with some content inside (index.html with "hello world message") and it works fine if I use xyz.example.com instead of www.xyz.example.com. So, can you help me to point to the right direction in order. I have a vps and I am able to change any file if is required. Below you can find my virtual host configuration. <VirtualHost xx.xxx.xxx:80> ServerName test.example.com ServerAlias www.test.example.com DocumentRoot /home/example/public_html/test ServerAdmin [email protected] UseCanonicalName Off CustomLog /usr/local/apache/domlogs/test.example.com combined CustomLog /usr/local/apache/domlogs/test.example.com-bytes_log "%{%s}t %I .\n%{%s}t %O ." ScriptAlias /cgi-bin/ /home/example/public_html/test/cgi-bin/ # To customize this VirtualHost use an include file at the following location # Include "/usr/local/apache/conf/userdata/std/2/example/test.example.com/*.conf" </VirtualHost>

  Read the article

• How do you run XBMC on nvidia dual screen and stop it from taking over the keyboard and mouse?

  - by Paul Swartout

  I have set up dual screen under Ubuntu 12.04. I have a GeForce 8500 GT and have used the nVidia control panel to set up dual screen in "Separate screen mode". Here's the resulting xorg.conf # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 295.33 (buildd@zirconium) Fri Mar 30 13:38:49 UTC 2012 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 Screen 1 "Screen1" RightOf "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "Maxdata/Belinea B1925S1W" HorizSync 31.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Monitor" # HorizSync source: builtin, VertRefresh source: builtin Identifier "Monitor1" VendorName "Unknown" ModelName "CRT-1" HorizSync 28.0 - 55.0 VertRefresh 43.0 - 72.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce 8500 GT" BusID "PCI:1:0:0" Screen 0 EndSection Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce 8500 GT" BusID "PCI:1:0:0" Screen 1 EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "CRT-0: nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" # Removed Option "metamodes" "CRT-1: 1280x768 +0+0" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "CRT-1: 1360x768_60 +0+0" SubSection "Display" Depth 24 EndSubSection EndSection All well and good and I have a nice blank XWindow displayed on my TV (the 2nd monitor). I then fire up XBMC from a terminal on the PC monitor using DISPLAY=:0.1 xbmc XBMC fires up quite nicely on the TV however I can no longer use the main PC monitor / mouse / keyboard as XBMC on the TV screen seems to have focus. I was hoping to have XBMC running on the TV and let the kids use the MCE remote whilst I get on with my work on the PC monitor. Does anyone have any idea how to overcome this? I'm presuming there's some xorg.conf fun and games needed but I've no idea where to start to be honest.

  Read the article

• Existing laravel 4 project gives 404 in browser

  - by Richard A

  I'm trying to set up a development environment on a virtual machine running Ubuntu 14.04 LTS using Nginx and HHVM. To do this, I followed the tutorial here. This goes well with a new installation of Laravel. But when I import an existing Laravel 4 project and try to open that on my actual machine (which will serve as the client running Windows 7), I'm getting a 404 File Not Found error on the screen while connecting to http://sav.savrichard.dev. I did add this to the hosts file with the correct IP Address. The virtual machine is receiving the request and responds with a 404 error. How do I solve this error? I'm pretty new to Ubuntu so I'm not exactly sure what's wrong. The project is located at /var/www/sav.savrichard.net The server configuration is as follow: server { listen 80 default_server; root /var/www/sav.savrichard.net/public; index index.html index.htm index.php; server_name sav.savrichard.dev; access_log /var/log/nginx/localhost.sav.savrichard.dev-access.log; error_log /var/log/nginx/localhost.sav.savrichard.dev-error.log error; charset utf-8; location / { try_files \$uri \$uri/ /index.php?\$query_string; } location = /favicon.ico { log_not_found off; access_log off; } location = /robots.txt { log_not_found off; access_log off; } error_page 404 /index.php; include hhvm.conf; # Deny .htaccess file access location ~ /\.ht { deny all; } } And the hhvm.conf file is: location ~ \.(hh|php)$ { fastcgi_keep_conn on; fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; include fastcgi_params; }

  Read the article

• Why is apt-cache so slow?

  - by Damn Terminal

  After upgrade to Trusty (14.04) from Saucy (13.10), all apt operations are very slow. Even those that do not include downloading anything, or connecting to any servers. For example, displaying the apt policy # time apt-cache policy [...] real 0m8.951s user 0m5.069s sys 0m3.861s takes almost ten seconds! Mostly a weird lag right after issuing the command. And it's the same even if I issue the same command again. On another system it doesn't take a tenth of a second real 0m0.096s user 0m0.070s sys 0m0.023s The other system is a little beefier but there was no noticeable difference before the upgrade. It's the same with apt-get, anything apt-related. How do I find out the source of this lag and fix it? Additional info: # cat /etc/nsswitch.conf # /etc/nsswitch.conf # # Example configuration of GNU Name Service Switch functionality. # If you have the `glibc-doc-reference' and `info' packages installed, try: # `info libc "Name Service Switch"' for information about this file. passwd: compat group: compat shadow: compat hosts: files dns networks: files protocols: db files services: db files ethers: db files rpc: db files netgroup: nis BTW is my understanding of how apt-cache works correct? It doesn't make any network connections when I run apt-cache policy, right? In case I'm wrong and it matters, here are my sources https://gist.github.com/anonymous/02920270ff68e23fc3ec

  Read the article

• Intel N10 graphics

  - by Rapsag1980

  Español: Buen día. Instalé en una notebook ubuntu 12.04 pero me da el problema que solamente me da dos resoluciones de pantallas 800x600 y 1024x768... En la primera se ve muy grotesca la pantalla y en la segunda se ve bien, pero falta un pedazo de pantalla arriba y abajo... He tratado de buscar información sobre el tema pero parece uno de esos "bugs" que no han conseguido ser erradicados... Intenté hacer el Xorg.conf y esas cosas y nomas no se puede... Recurro a su sapiencia y experiencia en este tipo de problemas... La mini es una Lanix Neuron lt, procesador intel atom n450 y la tarjeta Intel corporation N10 family integrated graphics controller.... Inglés: Good day. I installed ubuntu 12.04 on a notebook but I get the problem that only gives me two screen resolutions of 800x600 and 1024x768 ... The first screen looks very grotesque and the second looks good, but missing a piece of screen up and down ... I tried to find information on the subject but it seems one of those "bugs" that have failed to be eradicated ... I tried to do the Xorg.conf nomas and stuff and you can not ... I appeal to your wisdom and experience in this kind of problem ... The mini is a Neuron Lanix lt, Intel Atom N450 processor and the Intel integrated graphics family corporation N10 controller ....

  Read the article

• radeon display driver clones monitors while using Xinerama

  - by gregmuellegger

  I'm trying to get my two Radeon HD 4770 cards working with three monitors. Xinerama works so far in the way that I have two fully working monitors were I can move windows from one to the other. My problem now is that my third monitor is a clone of my second monitor (displaying the exact same thing). These monitors are connected to the same graphic card ("Screen Middle" and "Screen Right" in the xorg.conf below). Here is my xorg.conf: Section "ServerLayout" Identifier "ThreeMonitors" Screen "Screen Left" 0 0 Screen "Screen Middle" RightOf "Screen Left" Screen "Screen Right" RightOf "Screen Middle" Option "Xinerama" EndSection Section "Monitor" Identifier "Monitor Left" Option "DPMS" EndSection Section "Monitor" Identifier "Monitor Middle" Option "DPMS" EndSection Section "Monitor" Identifier "Monitor Right" Option "DPMS" EndSection Section "Device" Identifier "Device Left" Driver "radeon" VendorName "ATI Technologies Inc" BoardName "ATI Radeon HD 4770 [RV740]" BusID "PCI:3:0:0" Screen 0 EndSection Section "Screen" Identifier "Screen Left" Device "Device Left" Monitor "Monitor Left" SubSection "Display" Depth 24 EndSubSection EndSection Section "Device" Identifier "Device Middle" Driver "radeon" VendorName "ATI Technologies Inc" BoardName "ATI Radeon HD 4770 [RV740]" BusID "PCI:2:0:0" Screen 0 EndSection Section "Screen" Identifier "Screen Middle" Device "Device Middle" Monitor "Monitor Middle" SubSection "Display" Depth 24 EndSubSection EndSection Section "Device" Identifier "Device Right" Driver "radeon" VendorName "ATI Technologies Inc" BoardName "ATI Radeon HD 4770 [RV740]" BusID "PCI:2:0:1" Screen 1 EndSection Section "Screen" Identifier "Screen Right" Device "Device Right" Monitor "Monitor Right" SubSection "Display" Depth 24 EndSubSection EndSection I'm using a fresh Kubuntu 10.10 installation with propsed-updates enabled since this repo contains a xorg fix for using multiple graphic cards. I hope someone can help me out. Very many thanks!!

  Read the article

• Nvidia GeForce Gt-520M-cn on intel dh61ww Ubuntu 12.04

  - by j goseeped

  hi people i hope you can help a little bit , i appreciate your time look: i have a this desktop i7 2600, 8gb ram ddr3, board intel dh61ww, Geforce Nvidia GT520-cn 2Gb ddr3, i just install ubuntu 64bits 12.04 kernel 3.2.0-23-generic , i want to setup two monitors samsung led 22" and get start mi video card 1) i download and installed nvidia driver 295.59 and also try with 302.17 to apt-update and upgrade, apt-get install build-essential linux-headers-$(uname -r), apt-get remove --purge nvidia*, apt-get remove --purge xserver-xorg-video-nouveau, vim /etc/modprobe.d/blacklist.conf blacklist vga16fb blacklist nouveau blacklist rivafb blacklist nvidiafb blacklist rivatv sh NVIDIA.run, sudo service lightdm start, reboot, nvidia-xorgconf 2)after reboot i get 800x600 and nvidia-settings say this. You do not appear to be using the NVIDIA X driver. Please edit your X configuration file (just run nvidia-xconfig as root), and restart the X server. 3) i change a little bit xorg.conf to set up a resolution to work property 4) i dont have any image in the monito and i dont have any option on Nvidia X server settings lspci | grep VGA 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 01:00.0 VGA compatible controller: NVIDIA Corporation GF119 [GeForce GT 520] (rev a1) egrep -i 'glx|nvidia' /var/log/Xorg.0.log [ 12.005] (II) LoadModule: "glx" [ 12.005] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 12.575] (II) Module glx: vendor="NVIDIA Corporation" [ 12.585] (II) NVIDIA GLX Module 302.17 Tue Jun 12 16:22:45 PDT 2012 [ 12.585] (II) Loading extension GLX [ 13.037] (EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found) [ 13.044] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event10) [ 13.044] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event9) glxinfo | grep direct Xlib: extension "GLX" missing on display ":0.0". Error: couldn't find RGB GLX visual or fbconfig sorry my english is no very well. and thanks guys

  Read the article

• Xorg crashes ever since using Nvidia dual monitors

  - by legion

  Well ever since I have used dual monitors with the NVIDIA X Server Settings program my xorg process has been crashing after a while, and its generally a pretty long while of like 6 hours afterwards. Before NVIDIA changed my xorg.conf file I only had xorg crash like twice in 2 months, I can't figure out what is going on. I am running ubuntu 12.04 with the MATE desktop environment v 1.2.0 xorg.conf # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 295.33 (buildd@allspice) Fri Mar 30 15:25:24 UTC 2012 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "LEN" HorizSync 51.8 - 55.8 VertRefresh 40.0 - 60.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "NVS 3100M" EndSection Section "Screen" # Removed Option "TwinView" "0" # Removed Option "metamodes" "DFP-0: nvidia-auto-select +0+0" # Removed Option "TwinView" "1" # Removed Option "metamodes" "DFP-1: nvidia-auto-select +0+0, CRT: nvidia-auto-select +1920+0" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinViewXineramaInfoOrder" "DFP-1" Option "TwinView" "0" Option "metamodes" "DFP-0: nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection

  Read the article

• How do I get HDMI output working on a Dell XPS 15 L502x?

  - by Jones

  Recently I've bought my dream's notebook, a Dell XPS 15 but since then this dream became a kind of endless nightmare. I'm almost getting crazy to make my graphic card driver work properly, but it seems to be just impossible. Yes, I have a 2GB NVIDIA GeForce GT 540m (Optimus) in it! It simply doesn't work. Every time I generate the xorg.conf Ubuntu hangs on while starting up, which forces me to remove this file to be able to start the notebook with the standard graphic settings. Another problem is that the Dell XPS 15 does NOT have a VGA output, but a HDMI. So, to be able to use a second monitor I have to configure it by the NVIDIA X Server Settings, which just works if the driver is properly initialized with the xorg.conf. I've also tried to make it work with the Bumblebee, but unfortunately it didn't help me much with the HDMI output. Do you guys have any idea to solve this deadlock? Is there any way for me to use my second monitor?

  Read the article

• Windows domain full hostnames cannot be resolved resulting in intranet not working

  - by OpethR

  the domain: is foo.bar.local full hostname is: bla.foo.bar.local short hostname is: bla I installed winbind. here is my smb.conf: name resolve order = lmhosts host wins bcast here is my nsswitch.conf: hosts: files mdns4_minimal [NOTFOUND=return] dns wins mdns4 when I try to ping full hostname, I get: "ping: unknown host" when I ping short hostname it works and shows me PING bla.foo.bar.local (10.11.20.135) 56(84) bytes of data. 64 bytes from bla.foo.bar.local (10.11.20.135): icmp_req=1 ttl=62 time=49.7 ms *notice that it manages to get the full hostname!? :S now the only reason I need it is cuz I'm trying to reach intranet websites. when I type short hostname "bla" in firefox address bar, it automatically changes it to the full hostname (which is good, right?!) but then it says: Server not found Firefox can't find the server at bla.foo.bar.local. what am I doing wrong? it's driving me nutz. so if you are wandering then yes, it is company intranet I'm trying to reach from ubuntu. If I use my crappy winxp everything is working perfectly well.

  Read the article

• Ubuntu 14.04: Fine tuning Touchpad for ThinkPad S431

  - by ramgorur

  I am using Ubuntu 14.04 on Lenovo ThinkPad S431. The touchpad is very bumpy, tricky to use. Slides down with a small touch, sometimes jerks erratically. I have tried to modify the settings in /usr/share/X11/xorg.conf.d/50-synaptics.conf file as below -- Section "InputClass" Identifier "touchpad catchall" Driver "synaptics" MatchIsTouchpad "on" MatchDevicePath "/dev/input/event*" Option "JumpyCursorThreshold" "250" Option "VertResolution" "100" # Option "HorizResolution" "65" # Option "MinSpeed" "1" # Option "MaxSpeed" "1" # Option "AccelerationProfile" "1" # Option "AdaptiveDeceleration" "8" # Option "ConstantDeceleration" "1" # Option "VelocityScale" "128" Option "HorizHysteresis" "150" Option "VertHysteresis" "150" EndSection There are lots of options here, does anyone know how to get a fine-tuned values for the above options (for ThinkPad S431)? The Hysteresis values seems to alleviate the problem a little bit, but failed to get a perfect result. EDIT: According to this bug report for ThinkPad X230 (+X230t), I set these values and quite good for now -- Option "VertResolution" "100" Option "HorizResolution" "65" Option "MinSpeed" "1" Option "MaxSpeed" "1" Option "AccelerationProfile" "2" Option "AdaptiveDeceleration" "16" Option "ConstantDeceleration" "16" Option "VelocityScale" "32" Option "HorizHysteresis" "50" Option "VertHysteresis" "50" and then you need to increase the cursor speed manually from the Unity mouse settings. But I am still looking for a fully functional (possibly with all the gestures) and a fine-tuned touchpad settings for S431. Further help is appreciated.

  Read the article

< Previous Page | 61 62 63 64 65 66 67 68 69 70 71 72  | Next Page >