Search Results

Search found 3018 results on 121 pages for 'plug'.

Page 65/121 | < Previous Page | 61 62 63 64 65 66 67 68 69 70 71 72  | Next Page >

• How to set up my network/bridging using Apple Airport equipment?

  - by John

  I'd like to set up my network like this, and I want to make sure it's possible using the hardware I have. I think it should be... I've got my cable modem in one room. I want to plug it into an Apple Airport Express and create my wireless my wireless network here. The airport express will do the NAT and DHCP. By my TV there are a few things to be networked (Xbox and Tivo). I have an airport extreme here. I'd like to have the airport extreme join the wireless network and share the connection to the ethernet ports. Can anyone provide some assistance on the best way to configure to do this? Thanks!

  Read the article

• IP camera's multicast/RTSP conflicting with 2.4GHz Wi-Fi?

  - by jayson

  Here at our business we have a Netgear R7000 running DD-WRT. I have been slowly adding IP cameras which I run using Blue Iris software. The last camera I bought (which is NOT a wireless camera), when I plug it into the network I start having really bad connection issues on the 2.4GHz Wi-Fi network. The 5GHz works fine, just the 2.4GHz all of the sudden has trouble connecting, as if it's conflicting. I've tried playing with the camera settings, different IP addresses, HTTP ports, etc, and discovered it to be a conflict with multicast. When multicast is checked, the Wi-Fi has issues but my video streams via Blue Iris. When unchecked, Wi-Fi works fine but the video won't stream through Blue Iris. The problem is there are no settings in the camera to change the RTSP port, which is set to 34567. Does anyone know something that could fix this issue? It all seems very strange to me but maybe someone has an idea?

  Read the article

• PC is randomly shutting off

  - by Bobby

  I have a PC which is randomly shutting off (the hard way, like someone pulled the plug). It's no heat problem, because this can happen after 2 minutes of operation or after 4 hours and I checked the temperature. It's also no problem of the operation system, because it will also do that while in BIOS. If it happens once, you can be sure that it will happen within the next hour another two or three times, and then it works again for over a week or even longer. Possible causes I've thought about so far are: Voltage Fluctuation Loose contact (already replugged all cables within the PC, no luck) Faulty PSU Maybe someone has more ideas to this? P.s.: I don't have the hardware specs with me right now, I'll post them as soon as I get them.

  Read the article

• Wrong screen resolution with HDMI output to HDTV

  - by bruno077

  I own an HDTV with a native resolution of 1360x768. Sometimes I plug in my laptop to watch movies, and I used to do it with a VGA cable. I've had no problem setting the laptop to the TV native resolution with the VGA cable (1360x768). Having acquired an HDMI cable recently, I can't go past 1280x720, and if I do, the TV displays "invalid format". At 1280x720, the image is viewable but not centered, so for example I can't see the windows taskbar or titlebars. I've tried both cables (VGA and HDMI) with the same settings: Laptop's display turned off and trying to set the Tv's native resolution. What could I try to fix this issue? Could it be a faulty cable? (I'm using a Thinkpad with Windows 7) EDIT: My graphics adapter appears listed as Mobile Intel(R) 4 Series Express Chipset Family (Searching for my laptop's model yields Intel GMA 4500MHD as the graphic card) I'm downloading a driver update from Intel's website. I'll report my progress when I check its behavior tomorrow.

  Read the article

• PC doesn't power up anymore

  - by Andrew

  I will tell you the story behind the problem. The computer needed to be reinstalled, it has 2 HDDs so I had to un-plug one to see which is which, to save as much data as possible. After unplugging the first one, it booted with the reinstallation CD, it wasn't the HDD I was looking for so I turned it off and unplugged the other one. After unplugging and turning on, right after booting test, the HDD was turned off, only the CPU fan was working. Turned it off with the power supply's button help, holding the power button didn't do it. And now it doesn't want to turn on anymore. I tried with another test power supply but the result is the same, doesn't want to turn on. Any idea?

  Read the article

• Network Drive Via Ethernet Port for Speed?

  - by Yar

  I have a Macbook with Firewire 400 and USB 2.0, so the only way I can get fast external storage is through the Ethernet port. A really fast firewire 800 drive on ANOTHER computer is actually much faster than the built-in drive (according to XBench). So I thought I would try to go one better and buy an ethernet-ready drive. I bought a Seagate GoFlex™ Home Network Storage System, and it seems like the only way to get it to work is to plug it into a router. Can this drive be used without a router (i.e., direct to computer)? Are there any drives that can be plugged directly into the ethernet port for fast access? I don't want the drive on my router: I want it on my computer. Ideally I'd need 7200rpm or faster, too... Update: Just chatted with Seagate and they said that this particular drive will not work that way. Will any others?

  Read the article

• Automatically distinguish difference between multiple HDDs in linux?

  - by Jakobud

  I'm running Ubuntu Server 9.10. I have two external USB HDDs. I use them each for different backup reasons. So certain data gets stored on one HDD, and different information gets stored on the other HDD. I want to make a script that can look at the external HDD can determine which HDD it is, so that it can copy the proper information to it. Is there a way for Linux to determine this? Like if I see one HDD as /dev/sdc1, then unplug it and plug in the other HDD, should Linux see it as /dev/sdd1 or will it be /dev/sdc1? I'm a bit of a Linux newb and I don't quite understand how it determines the /dev/sdxx values that it assigns to drives.

  Read the article

• how to restore grub

  - by takeshin

  During copying files via lan my Ubuntu Server 10.04 hung up and I had to reset the computer. After reboot, I got: Grub error 17, so I tried the rescue alternate CD, but I got a info, that no partitions were found on the disk. I used testdisk to restore the partitions. Using fdisk -l shows the partitions now, but when the system boots up I does nothing but displays: L234: When I plug the drive to another computer, it is not automatically mounted and I can't access the data. What to do now? How to restore the grub and boot up the system?

  Read the article

• Motherboard warning lights when plugging in a display port cord to graphics card?

  - by rllr

  Earlier today, my computer spontaneously shut itself off and refused to turn back on. I tested my PSU and it's operating fine. I unplugged everything and let it sit for a while and it started to make a high pitched coil whine/hiss. When I came back an hour later and plugged in only the power cord, it turned on without any issues. After some troubleshooting, I noticed my motherboard (Intel D975XBX2) has a red CPU led and VR led that come on whenever I plug my monitor into my graphics card via display port. DVI does not cause a similar issue. I was running three monitors off the card, so I need both DVI ports and the display port working. Is it likely my graphics card needs to be replaced, or should I be looking elsewhere to resolve this issue?

  Read the article

• How to charge an iPhone on a Windows PC without Installaing iTunes

  - by Martin Hollingsworth

  I want to be able to charge my iPhone on my work computer, which is running Windows Server 2008 SP1 64-Bit. When I plug the iPhone in with the USB cable, it will not charge. Windows attempts to locate a driver for the device but only comes up with a generic Camera device and even if I allow that to be installed, the iPhone still does not charge. I have checked the computer's BIOS settings and did not find anything relating to power on the USB devices. I also tried this on ports at the back of the computer in addition to those on the front. The PC is a Dell Optiplex 780. As far as I can tell USB devices do not charge unless Windows has installed an appropriate driver. Since it is a work computer I do not want to install iTunes which does include a driver. I have a workaround that I will post as an answer for reference.

  Read the article

• How can I run Ghost from a bootable USB key drive?

  - by Joe Philllips

  I have a laptop that does not have a cd-rom or floppy drive. It is able to boot from USB though. I have a disk image (ghost) of the disk that I need to restore back onto the laptop. I can't find a way to actually run the Ghost utility from a USB key though. I believe the ghost.exe should run from within DOS just fine but I can't seem to create a bootable USB key with DOS on it that allows me to run an EXE. Edit: I managed to find a Ghost utility that I could load from a bootable USB drive. Unfortunately, when I plug in my NTFS external drive (USB), it is not detected.

  Read the article

• DVI to VGA adapter only working in one output

  - by Tom Jenkinson

  I have a AMD Radeon HD 6800 Series graphics card which has 2 DVI outputs. I tried to set it up with 2 monitors which both have vga connectors on the end and used 2 dvi to vga adapters like these. http://www.tvcables.co.uk/images/items/vga-to-dvi.jpg For some reason nothing would reach the monitor, it would remain in standby, if it was plugged into the second output. I tried all the different combinations of cables, adapters and the 2 monitors but whichever monitor that was plugged into the second output wouldn't work. I then randomly decided to plug a different monitor into the second output which has a dvi connector on the end so there was no need for an adapter and plugged it in and it worked! Does anyone know why the second output on the graphics card won't work with a dvi to vga adapter (and the first output will)? I'm really confused! Thanks

  Read the article

• Will I have internet connection issues next day, if I unplug router at night?

  - by headskracher77

  I did this regularly a few years ago and used to feel like I was 'being punished' by the Interent svc provider for disabling access to my computer, because trying to re-connect the next day became a constant pain. I have the same linksys router, a comcast modem, and hi-speed broadband through their LAN. Question: who or what is at fault for lousy internet connections, slow connections, or no connections: (everybody's tech dept. blames everybody else) The router? 10 year olds, maybe obsolete? The modem? came with the service plan - can connect three devices on a sharedconnection. The ISP: I read they not only even control and completely regulate bandwidth usage, but they also ration it!! (true?) So can I safely 'pull the plug' each night for security or not? thnx

  Read the article

• IIS site not resolved by DNS server

  - by Alexio

  I've a problem with my network. My Config: SVR01 (ws2008r2): DNS server and Domain Server SVR02 (ws2008r2): IIS (v7.5) Domain Clients In SVR02 there are many sites. When I try to connect on one site (such as: demo1.myhomesite.intra) the browser say "Internet Explor can not display the webpage". Well... In this case I found a workaround: unplug and plug the lan cable (or disable and enable wifi) in my client and the site work correctly. But this workaround is not a solution. Please, can you help me??

  Read the article

• Bound external Cisco CIGESM ports to a specific BladeServer

  - by Vinícius Ferrão

  We have an IBM BladeCenter with 14 blade servers and one external Cisco CIGESM for Ethernet connectivity. Since this hardware is a little old, we will use it for other services, and we want to run a pfSense instance on one of the blades. It's just an Firewall Appliance, but it needs two network interfaces: one for the WAN and the other one for LAN access. Our architecture works on top of static routes, we don't use NAT, so we got the WAN IP in one interface routing to the another one. The main problem is how to plug the WAN cable in one of the four external ports and make it exclusive to the blade server containing the firewall. And we also need an exit port that goes through a 3COM 4200G switch that makes the internal routing and VLAN separation. Thanks in advance

  Read the article

• Where can I configure wireless to be passed on to the Virtualbox guest?

  - by huahsin68

  I have WinXP install in virtualbox which host in Linux. I have a TP-Link (TP-WN321G) USB wifi adapter and have the driver installed inside WinXP. When I plug-in the wifi adapter, there is an option show "Ralink 802.11g WLAN [0101]" in the virtualbox's USB icon, tick on that option, the Device Manager able to detect the hardware which shows TP-Link, but when look into the properties, it says there is no driver was install. I did try to install Ralink driver but still no luck. Just curious why my wifi adapter is TP-Link, but the option show Ralink? May I know how can I emulate the wireless network inside WindowsXP?

  Read the article

• Help accessing Beagle over serial with Minicom/GTKTerm

  - by mrgordon

  I am trying to access a brand new Beagle Board from Ubuntu or Mac over serial using the setup seen here: http://specialcomp.com/beagleboard/RevC1.htm I got Minicom and GTKTerm installed on the Ubuntu box. I set up the correct baud rate, turned off flow control, and have tried ttyUSB0 and ttyS0. Once minicom is configured properly, I should just see the init text from the board appear if I have minicom open in terminal while I plug in the board, correct? dmesg shows ttyUSB0 on the computer has been connected to ttyS0 on the beagle.

  Read the article

• Animated HTTP request visualisation on Apache

  - by Simon Bennett

  This is more a question to appease my memory in trying to remember what it was I saw a while ago. I remember being introduced to a realtime server visualisation tool that showed the current requests that Apache was handling in a kind of fireworks effect on screen. Each request/group of requests would be shot across the screen in varying colours. I can't for the life for me remember what is was called and hunting around here and Google has left me empty handed. Just wondering if anybody else was able to plug this gem from the memory and ease my pain! Thanks

  Read the article

• identifying windows service

  - by András

  On my win7 machine when I watch a movie in XBMC, once per hour the desktop regains the focus. The movie keeps playing, but in the background now, so I can only hear it. It is quite irritating. I noticed, that the Windows Application log always contains two entres for this time: "The description for Event ID 0 from source Self-service Plug-in cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer." One entry is for starting, and one for stopping 60 seconds later. This keeps repeating, every two starts 3600 seconds apart. How can I repair it? How can I find out which service it is?

  Read the article

• Resizing partition in Windows 7: how long does it take?

  - by PaulJ

  Okay, maybe this is me worrying about nothing, but... I have a 500 Gb. external drive where I want to create a second partition. I plug it into my Windows 7 box, use Disk Manager and pick the "Shrink Volume" option. It says that the maximum amount to shrink is around 150 Gb. I hit "OK" and it starts working... and it's been going on for about half an hour. The light of the external HD is constantly working. Disk Manager is greyed out and has the "does not respond" message on the top bar; basically, it's behaving as a non-responding application. Is this normal for a drive of this size, or did the application hang? How long would it typically take for a drive like this to resize its partition?

  Read the article

• How to use 3T SAS HDDs which aren't supported by Dell PERC 6i

  - by Sunry

  We bought several 3T SAS hard disks want to use with our Dell R710 server. But we found our R710 can't recognize the 3T hd, and then we dig out the raid card is PERC 6i which doesn't support it. Contacted with Dell that H700 and H800 support 3T hd, thought we can buy a H700 , but the SAS cable is not available in the market right now. And it seems very hard for us to change the raid card, also no suitable tools to tease the special screws. So I want to know if any other method to use these 3T hds instead of putting them in the warehouse? Can I low formatting it to 2TB, and plug it into Dell R710 to use? Or a SAS to USB adapter to use it as USB external disk? I just want to use them by Dell R710 even external.

  Read the article

• is there such a thing as a ip femtocell, and what does it do?

  - by The Journeyman geek

  My dad mentioned a co-worker suggested using a device, that might use cdma to route calls through IP to save costs on a certain overseas project we're on- since our home base is quite far from there. I've never heard of such a device, so if it does, i'm wondering, if its specific to particular ISPs, or if you can just pick one off the shelf, plug it into an arbitraty internet connection, and make calls using it and a cellphone of some sort? As you can tell, details are sketchy, so... if such a device dosen't exist, saying so might be a right answer ;)

  Read the article

• Cable installed - now my hub has no connection the router/modem - what do I need to buy?

  - by bcmcfc

  My previous setup was as follows: [modem/router]------[switch]+------ [pc1] +------ [pc2] I've just moved and had cable installed and I no longer have the option of running a lengthy LAN cable from the router to the switch to provide network and internet access to the two PCs. The cable company provided 2 wireless N USB adapters. What do I need to buy to plug into where in order to restore the network to its previous state? PC1 dual boots Windows 7 and Ubuntu 12. PC2 runs Debian 6. Edit: USB adapters - Netgear WNDA3200 Switch - TP-Link TL-SF1008D 8 port Ethernet switch Cabling - various patch cables cat5e rj45 Modem/Router - pretty standard cable company job - wireless Intention is something like- [modem/router] --wifi-- [some-new-hardware or perhaps to pc1] ----[switch]---[pc1/2]

  Read the article

• Macbook Pro 2.2ghz 2011 (OSX 10.6.7) problem with NTFS 3G

  - by James

  I installed NTFS 3G but now get the following error message when I try to plug in my external drive. I also get it on startup about my Windows partition. Uninstall/ reinstall does not work. NTFS-3G could not mount /dev/disk1s1at /volumes/freeagent GoFlex Drive because the following error occured: /library/filesystems/fuse.fs/support/fusefs.kext failed to load- (libkern/kext) link error; check the system/ kernel logs for errors or try kextutil(8). The MacFUSE file system is not available (71) Any help would be great. I'd hope to avoid reinstalling OS X if possible!

  Read the article

• USB AutoRun Dialog: Open a webpage option not shown in dialog

  - by Jake M

  I am attempting to make our webpage open when someone plugs in our USB device. My Problem: When we plug in the USB device the autorun dialog appears but there is never an option to open/run the webpage we have specified. See below pic of the dialog we see. Isn't there meant to be an option that says something like "Open in Internet Explorer" or etc.? What we are hoping to achieve is to have another option below 'Use this drive for backup' that says something like 'Open in Web Browser' or something that will ultimately open our webpage when the users decides to. Heres our code that is inside the file autorun.inf which is placed on the USB device: [autorun] shellexecute=http://exds-test.epicservices.com.au/V10InstallationInfo.aspx action=Open Website label=EXDS USB Drive

  Read the article

< Previous Page | 61 62 63 64 65 66 67 68 69 70 71 72  | Next Page >