Search Results

Search found 12775 results on 511 pages for 'remote validation'.

Page 65/511 | < Previous Page | 61 62 63 64 65 66 67 68 69 70 71 72  | Next Page >

  • Can Remote Desktop be set up to use IPv6?

    - by Garrett
    I have both a Windows 7 Ultimate and a Windows XP Professional machine set up on my home network. I would like to be able to access them from school. Port forwarding is not currently an option (long story). Is there a way to set it so that I can RDP (yes it has to be RDP not something like TeamViewer or LogMeIn) over IPv6, possibly using Teredo? I have tried but I can't seem to get it working. Also I cannot ping these machines' IPv6 addresses. How can I get this set up?

    Read the article

  • Is it possible to add hardware on a remote machine and use it as if it was installed on the local machine?

    - by that0th3rGuy
    Probably a silly question. We have two computers in the apartment running Windows 7 and Windows Vista. 99% of the time we use headphones but every now and then we have a desire for some ambiance so we got a set of 2.1 speakers. But now only one of us has access to the speakers unless we move them around every now and then. So I was wondering if it's possible to add the other computer's sound card as a hardware device on my computer so that I can configure, for instance, Winamp to play through the other computer's sound card, hence the speakers connected to the other computer.

    Read the article

  • Servers at remote sites vs. centralized servers?

    - by Boden
    Looking for some opinions here. We've got three physical locations and site-to-site VPN between all three. Currently we've got Windows domain controllers at each location, with roughly 50 clients at each. The domains are currently separate, and we're looking at integrating the three sites. Email (Exchange) will be located at the primary site, and RPD is already being used at the secondary branches to hit the app servers also located at the primary site. The bulk of the local user load at the other two sites is just file sharing. What would the main benefits and drawbacks be of replacing the local domain controllers with NAS devices, and only keeping the domain controller(s) at the primary site? (assuming upgrades are coming regardless) Under what circumstances would you choose one setup over the other?

    Read the article

  • How can i access windows XP remote desktop on private IP from internet?

    - by Jennie
    So the machine is behind a DSL router on a private IP so that it can not receive inbound requests. I want to know: Is there anyway to setup the router NAT (i highly doubt it supports one to one port mapping) without disturbing other users on the same router. I have another machine on internet which has public IP on it without any firewall. Can i use this machine as a relay server so that to initiate the connection, the XP machine send an outbound request and this relay server makes my connection through and then i can access my machine on pvt ip without any problem. Please tell??

    Read the article

  • What's the best way to telnet from a remote Windows PC without using RDP?

    - by Rob D.
    Three Networks: 10.1.1.0 - Mine 172.1.1.0 - My Branch Office 172.2.2.0 - My Branch Office's VOIP VLAN. My PC is on 10.1.1.0. I need to telnet into a Cisco router on 172.2.2.0. The 10.1.1.0 network has no routes to 172.2.2.0, but a VPN connects 10.1.1.0 to 172.1.1.0. Traffic on 172.1.1.0 can route to 172.2.2.0. All PCs on 172.1.1.0 are running Windows XP. Without disrupting anyone using those PCs, I want to open a telnet session from one of those PCs to the router on 172.2.2.0. I've tried the following: psexec.exe \\branchpc telnet 172.2.2.1 psexec.exe \\branchpc cmd.exe telnet 172.2.2.1 psexec.exe \\branchpc -c plink -telnet 172.2.2.1 Methods 1 and 2 both failed because telnet.exe is not usable over psexec. Method 3 actually succeeded in creating the connection, but I cannot login because the session registers my carriage return twice. My password is always blank because at the "Username:" prompt I'm effectively typing: Routeruser[ENTER][ENTER] It's probably time to deploy WinRM... Does anyone know of any other alternatives? Does anyone know how I can fix plink.exe so it only receives one carriage return when I use it over psexec?

    Read the article

  • Why does HP Update at remote system trigger RDP printing at local system?

    - by lcbrevard
    This is obscure. When connected with RDP to another system that has HP Update installed on it, either directly running the HP Update or having the notification pop up to ask if you want to run HP Update causes the local system to try to print something to peculiarly-chosen-local-printer. Case 1: Desktop Win 7 Ult system RDP connected to HP Laptop Win 7 Ult system. When HP Update runs on the laptop a dialog for XPS Writer Save As... appears on Desktop system. Even if you put in a name, nothing gets generated and the dialog repeats. And repeats. Until you (a) close the RDP connection and (b) clean out the queued entries. If the HP Update pops up the request to run the update and you are not at the desk when this happens, there can be dozens of queued requests for this bogus printing. NOTE: the XPS Writer is not selected as a default printer on either system. Case 2: (Different) HP Laptop Win 7 Ult system RDP connected to XP Pro "brand X" desktop system but with HP printer drivers installed. If the request to run HP Update notification pops on the XP system, dozens of attempts to print, in this case to a Versa Check Printer driver, are queued. Dismissing the HP request, closing RDP, and cleaning out the queue are required to stop this. NOTE: the Versa Check Writer is not selected as a default printer on either system. THE QUESTION: What the heck is going on here? Some kind of scripting or COM activity that is misdirected?

    Read the article

  • Startech SVx41HDI Series Server Remote Control Usage Question - How do I switch away from a dead por

    - by tajh
    We have a Startech KVM over IP model SV841HDI and it was stuck pointing a port where the machine has been removed. We ended up having to physically plug something into that port in order to switch ports again, meaning that if someone in support accidentally switches to an empty port, we need to have a documented solution for making it useable again. The unit is old, no longer under warranty, firmware updates for it are no longer available (interestingly it runs a powerPC version of busybox). Since it does work well except for this one catch, we would like to avoid replacing it. Reading the manual, you have a several recommended methods. I tried them. Hit the left CTRL key a few times (as well as all the other popular KVM keys I could think of). The VNC GUI offers lots of buttons - none of them switch away from a dead port. The question is: how do I switch away from a dead port on this particular KVM remotely?

    Read the article

  • How to install remote software NOT on a domain?

    - by Nicros
    I have a situation where some software (that I wrote) is going to be deployed on 60 laptops for an event. The laptops are all running windows 7, but there is no domain controller, and they will all be connected to a 192.168.x.x network using wifi. Is there any convenient way to push the software (consisting of an msi file) can be pushed out to all the laptops and installed? I looked at WMIC, but I think that requires machines be joined to a domain, as does Group Policy. The other alternative is Powershell, but I have literally 4 hours to do this and will have no time to figure out the right script. It's not the end of the world if it has to be done manually (I can find volunteers) but it would be nicer if it could be automated somehow.

    Read the article

  • RDP exits immediately after connecting to Windows Server 2008 R2

    - by carpat
    Background: I recently got a Windows cloud VPS server. I don't have much experience with server admin (I'm a programmer), and what little I do have is with linux servers. Ever since getting the server I've been having issues with RDP. I can connect about two or three times, after which point I can't connect until one of the tech guys "fixes" it (see below). When I connect, I can stay connected for hours with no problem. When the problem connecting starts, the first time I try to log in, the remote desktop window pops up, starts connecting, and then exits with "Your Remote Desktop session has ended". After that, for about 10-20 minutes if I try to connect again, the connections times out with Remote Desktop can't connect to the computer for one of these reasons: 1) Remote access on the server is not enabled 2) The remote computer is turned off 3) The remote computer is not available on the network then goes back to connecting once and immediately disconnecting. All of the updates are installed. The firewall has been correctly configured to let RDP traffic through. The remote setting is "Allow connections from computers running any version of Remote Desktop". I tried creating a second user, and when I can't connect, I can't connect to that user either. I've tried both soft and hard reboots, neither of which help. I've tried connecting from two different computers (both running Windows 7) from two different networks (work and home), and the behavior is the same. Everything else on the server continues to run fine (IIS-served http pages, Tomcat-served java pages, svn, ping). The "fix" that the tech guys supply is simply logging into the console on their end, after which point I can connnect 2 or 3 times again. The event viewer on the server has "authentication failure" (or something similar) events generated when I attempt to log in and can't. I can't get to the actual event at the moment as I'm currently in the can't connect stage, and waiting for the techs to log in. But when I searched for the event earlier this morning I couldn't find anything useful. Can anyone help?

    Read the article

  • Windows CE Remote Kernel Tracker - gathering data in one (more) file during a log period of time

    - by Nic
    I'm using the "Windows CE Kernel Tracker" tool to gather data from my embedded device. This is working fine for short period of time. It seems that the tool is getting data in memory and not on disk. I'm wondering if there is a way to take the data from the device and log it in one or more file on my development computer. This could be useful for long time test period : for instance, one night or one entire day. Any ideas? p.s. I don't want to log on to the device, I want to log on my development PC.

    Read the article

  • Trouble with Remote Desktop pulling through printers. Drive Redirection works, and the ports created but not the printers

    - by Windex
    I've run out of things to look into. All the support documents have been gone through and still provide no resolution. I've checked the service permissions, (sc sdshow spooler) they all match up with other systems and what is output on the support documents. I'm nearly positive that the issue can't be permissions anyway as the software requires all users to be an administrator, so all users are a local administrator. (I haven't looked into why yet but its on the list, I was just recently brought into this team and we've put procedures in place for quick recovery.) We've applied hot fixes relating to RDS and printing, though I'm not sure which ones they were. I've combed through group policy and no where is printer redirection disabled. It's setup with all default values regarding the use and redirection of printers and a quick install of W2k8 R2 shows that it works by default. This dev install was joined to the same domain, placed in the same OU, shows the same policies applied, etc, etc, etc, The server generates all the correct redirected ports but no printers are created. It will also redirect drives without issue, this would seem to rule out the usermode service that handles redirects being broken. No events are logged related to any of the events and there are no events from the TerminalServices-Printer source. There were local printers setup. I didn't think it would mattter but as I was running out of ideas I tried deleting them all with no change. The TS was configured for the software it will be running before we checked out the redirection of printers so the other team responsible to setting up new servers wants to find a fix instead of reloading a new server. I'm not sure where or what else to look for. Any ideas?

    Read the article

  • What causes Remote Desktop Services Manager to crash in Server 2008 R2?

    - by milkmood
    I have this consistent problem of RDSM crashing in Server 2008 R2. It is either really slow to open, sometimes never opens, or after it's been open and working properly for a bit, stops working, and forces an unload of the snap-in. It's done this since the deployment of this server, new hardware, new instance of S2k8. Domain Administrator login. I am using it to manage 3 Terminal Servers, the other two are S2k3. I've used it without issues on other 2008 servers.

    Read the article

  • Is it possible to allow saved passwords for remote desktop in a domain environment?

    - by user2813274
    I have checked the "remember password" and every single time, even if it connects correctly after I type a password and check the box, it does not allow subsequent logins using the stored password, saying that it is invalid - is it being saved improperly somehow? is it being disabled by some obscure setting somewhere? (which would be very counter-intuitive, seeing as how the check box is available). I have tried both with domain and non-domain (local) admin accounts, and am using the FQDN for the server. edit: as a troubleshooting step, where would one go to find the (hopefully hashed) password?

    Read the article

  • Can I install applications to Remote Desktop Session Hosts via Group Policy?

    - by CC.
    I have a GPO that installs an application using the Software installation policy under Computer Configuration. I assign this GPO to the OU with our desktop/laptop computers, and my clients all install the software fine. I have another separate OU that covers our new Server 2012 RD session hosts. Previously, we've manually installed applications on our one Terminal Server. Now we have one Broker and two Session Hosts. I'd like to take my existing GPO, assign it to the session hosts, and have it install on the next reboot after a gpupdate so I'm sure that each is identically configured. Given this info: Should I be able to install applications via GPO to Session Hosts? Will Group Policy automatically install the applications as if I put the session host into /install mode, or do I need to do that?

    Read the article

  • Trade-offs of local vs remote development workflows for a web development team

    - by lamp_scaler
    We currently have SVN setup on a remote development server. Developers SSH into the server and develops on their sandbox environment on the server. Each one has a virtual host pointed to their sandbox so they can preview their changes via the web browser by connecting to developer-sandbox1.domain.com. This has worked well so far because the team is small and everyone uses computers with varying specs and OSs. I've heard some web shops are using a workflow that has the developers work off of a VM on their local machine and then finally push changes to the remote server that hosts SVN. The downside to this is that everyone will need to make sure their machine is powerful enough to run both the VM and all their development tools. This would also mean creating images that mirror the server environment (we use CentOS) and have them install it into their VMs. And this would mean creating new images every time there is an update to the server environment. What are some other trade-offs? Ultimately, why did you choose one workflow over the other?

    Read the article

  • Executing a Batch file from remote Ax client on an AOS server

    - by Anisha
    Is it possible to execute a batch file on an AOS server from a remote AX client? Answer is yes, provided you have necessary permission for this execution on the server. Please create a batch file on your AOS server. Some thing as below for creating a directory on the server.    Insert a command something like this in a .BAT file (batch file) and place any were on the server.   Mkdir “c:\test”      Copy the following code into your server static method of your class and call this piece of code from a button click on Ax form. Please execute this button click from a remote AX client and see the result . This should execute the batch file on the server and should create a directory called ‘test’ on the root directoryof the server.     server static void AOS_batch_file_create() { boolean b; System.Diagnostics.Process process; System.Diagnostics.ProcessStartInfo processStartInfo; ; b = Global::isRunningOnServer(); infolog.add(0, int2str(b)); new InteropPermission(InteropKind::ClrInterop).assert(); process = new System.Diagnostics.Process(); processStartInfo = new System.Diagnostics.ProcessStartInfo(); processStartInfo.set_FileName("C:\\create_dir.bat"); // batch file path on the AOS server process.set_StartInfo(processStartInfo); process.Start(); //process.Refresh(); //process.Close(); //process.WaitForExit(); info("Finished"); }

    Read the article

  • Horse Drawn Fiber Optics Bring Broadband to Remote Areas

    - by Jason Fitzpatrick
    When you think of fiber optics and high speed internet the last thing you likely think of is… horses. Yet horses have been put to use rolling out fiber optics to remote rural locations. In Vermont a Belgium draft horse named Fred, seen in the photo above being tended by his handler Claude, is a distinctly 19th century solution to a 21st century problem; how to run fiber optic cable through remote areas where trucks cannot easily pass. The man and animal are indispensable to cable and phone-service provider FairPoint Communications because they easily can access hard-to-reach job sites along country roads, which bulky utility trucks often cannot. “It just saves so much work – it would take probably 15 guys to do what Fred and Claude can do,” said Paul Clancy, foreman of a line crew from FairPoint. “They can pull 5,000 feet of cable with no sweat.” You can read more about the use of draft horses to draw lines and the roll out of broadband to rural Vermont at the link below. Vermont Uses Draft Horse to Lay Cables for Internet Access [Reuters] How To Encrypt Your Cloud-Based Drive with BoxcryptorHTG Explains: Photography with Film-Based CamerasHow to Clean Your Dirty Smartphone (Without Breaking Something)

    Read the article

  • Most effective way to do daily standup meeting when a few people are remote

    - by Burhan Ali
    I am a software developer in a small team of seven. We are not an Agile (with a big 'A') team but are experimenting with some aspects of agile. One of these is the daily "standup" meeting. The difficulty here is that for two days of the week we have at least one person working from home so the full team isn't available in the same room. What is the best way to carry out a daily standup in this situation? Some facts that may be relevant: We all work in a single open plan room. We use Skype in our company. We don't have any video conferencing capability. We all work the same hours so there are no timezone complexities involved. The development manager is one of the people who works from home one day a week. Things we have tried: Conference call using Skype: This is tricky for those in the office because you can hear people speak in the room and then a split second later through the headset. This can e very distracting. Conference phone: Awful experience. Hard to get them to work and poor quality audio. Text-based updates using Skype. This is not as engaging and is no different than just firing off a status email in the morning. I have seen other questions about remote collaboration but they are mainly about completely remote teams and/or teams that span multiple time zones. We are not affected by either of these problems. What can we do to make our standup meetings better in these circumstances?

    Read the article

  • JSF 2 - clearing component attributes on page load?

    - by jamiebarrow
    Hi, The real question: Is there a way to clear certain attributes for all components on an initial page load? Background info: In my application, I have a JSF 2.0 frontend layer that speaks to a service layer (the service layer is made up of Spring beans that get injected to the managed beans). The service layer does its own validation, and I do the same validation in the frontend layer using my own validator classes to try and avoid code duplication somehow. These validator classes aren't JSF validators, they're just POJOs. I'm only doing validation on an action, so in the action method, I perform validation, and only if it's valid do I call through to the service layer. When I do my validation, I set the styleClass and title on the UIComponents using reflection (so if the UIComponent has the setStyleClass(:String) or setTitle(:String) methods, then I use them). This works nicely, and on a validation error I see a nicely styled text box with a popup containing the error message if I hover over it. However, since the component is bound to a Session Scoped Managed Bean, it seems that these attributes stick. So if I navigate away and come back to the same page, the styleClass and title are still in the error state. Is there a way to clear the styleClass and title attributes on each initial page load? Thanks, James P.S. I'm using the action method to validate because of some issues I had before with JSF 1.2 and it's validation methods, but can't remember why... so that's why I'm using the action method to validate.

    Read the article

  • JQuery validation not working for checkbox group

    - by Chris Halcrow
    I'm having trouble getting JQuery validation to work with a set of checkboxes. I'm generating the checkboxes using an ASP.NET checkboxlist, and I've used JQuery to set the 'name' attribute to the same thing for each checkbox in the list. Here's the code that gets written to the browser. I'm setting the 'validate' attribute on the 1st checkbox to set the rule that at least one checkbox must be selected. The JQuery validation works for all other elements on the form, but not for the checkbox list. I'm also using a JQuery form wizard on the page which triggers validation for each 'page' of the form, so I don't have control over how the validation is called. <input id="ContentPlaceHolder1_MainContent_AreaOfInterest_0" class="ui-wizard-content ui-helper-reset ui-state-default" type="checkbox" value="Famine" name="hello[]" validate="required:true, minlength:1"> <label for="ContentPlaceHolder1_MainContent_AreaOfInterest_0">Famine</label> <br> <input id="ContentPlaceHolder1_MainContent_AreaOfInterest_1" class="ui-wizard-content ui-helper-reset ui-state-default" type="checkbox" value="Events Volunteer" name="hello[]"> <label for="ContentPlaceHolder1_MainContent_AreaOfInterest_1">Events Volunteer</label> Any ideas on what's going wrong? There are lots of examples of JQuery scripts that will do the validation, however I'm trying to avoid this as I'm generating the checkboxlist server side by a custom control so that it can be re-used across different pages that may or may not have JQuery enabled. I'm trying to enable the JQuery validation whilst being as unobtrusive as possible, so that pages will still work even if JQuery is disabled. Here are the relevant JQuery inclusions and JQuery initialisation script for the form wizard. I'm not using any initialisation code for JQuery validation: <script type="text/javascript" src="../js/formwizard/js/bbq.js"></script> <script type="text/javascript" src="../js/formwizard/js/jquery.form.js"></script> <script type="text/javascript" src="../js/formwizard/js/jquery.form.wizard.js"></script> <script type="text/javascript" src="../js/formwizard/js/jquery.validate.js"></script> <script type="text/javascript"> $(document).ready(function () { $("#form1").formwizard({ validationEnabled: true, focusFirstInput: true }); }); </script>

    Read the article

  • Guarding against CSRF Attacks in ASP.NET MVC2

    - by srkirkland
    Alongside XSS (Cross Site Scripting) and SQL Injection, Cross-site Request Forgery (CSRF) attacks represent the three most common and dangerous vulnerabilities to common web applications today. CSRF attacks are probably the least well known but they are relatively easy to exploit and extremely and increasingly dangerous. For more information on CSRF attacks, see these posts by Phil Haack and Steve Sanderson. The recognized solution for preventing CSRF attacks is to put a user-specific token as a hidden field inside your forms, then check that the right value was submitted. It's best to use a random value which you’ve stored in the visitor’s Session collection or into a Cookie (so an attacker can't guess the value). ASP.NET MVC to the rescue ASP.NET MVC provides an HTMLHelper called AntiForgeryToken(). When you call <%= Html.AntiForgeryToken() %> in a form on your page you will get a hidden input and a Cookie with a random string assigned. Next, on your target Action you need to include [ValidateAntiForgeryToken], which handles the verification that the correct token was supplied. Good, but we can do better Using the AntiForgeryToken is actually quite an elegant solution, but adding [ValidateAntiForgeryToken] on all of your POST methods is not very DRY, and worse can be easily forgotten. Let's see if we can make this easier on the program but moving from an "Opt-In" model of protection to an "Opt-Out" model. Using AntiForgeryToken by default In order to mandate the use of the AntiForgeryToken, we're going to create an ActionFilterAttribute which will do the anti-forgery validation on every POST request. First, we need to create a way to Opt-Out of this behavior, so let's create a quick action filter called BypassAntiForgeryToken: [AttributeUsage(AttributeTargets.Method, AllowMultiple=false)] public class BypassAntiForgeryTokenAttribute : ActionFilterAttribute { } Now we are ready to implement the main action filter which will force anti forgery validation on all post actions within any class it is defined on: [AttributeUsage(AttributeTargets.Class, AllowMultiple = false)] public class UseAntiForgeryTokenOnPostByDefault : ActionFilterAttribute { public override void OnActionExecuting(ActionExecutingContext filterContext) { if (ShouldValidateAntiForgeryTokenManually(filterContext)) { var authorizationContext = new AuthorizationContext(filterContext.Controller.ControllerContext);   //Use the authorization of the anti forgery token, //which can't be inhereted from because it is sealed new ValidateAntiForgeryTokenAttribute().OnAuthorization(authorizationContext); }   base.OnActionExecuting(filterContext); }   /// <summary> /// We should validate the anti forgery token manually if the following criteria are met: /// 1. The http method must be POST /// 2. There is not an existing [ValidateAntiForgeryToken] attribute on the action /// 3. There is no [BypassAntiForgeryToken] attribute on the action /// </summary> private static bool ShouldValidateAntiForgeryTokenManually(ActionExecutingContext filterContext) { var httpMethod = filterContext.HttpContext.Request.HttpMethod;   //1. The http method must be POST if (httpMethod != "POST") return false;   // 2. There is not an existing anti forgery token attribute on the action var antiForgeryAttributes = filterContext.ActionDescriptor.GetCustomAttributes(typeof(ValidateAntiForgeryTokenAttribute), false);   if (antiForgeryAttributes.Length > 0) return false;   // 3. There is no [BypassAntiForgeryToken] attribute on the action var ignoreAntiForgeryAttributes = filterContext.ActionDescriptor.GetCustomAttributes(typeof(BypassAntiForgeryTokenAttribute), false);   if (ignoreAntiForgeryAttributes.Length > 0) return false;   return true; } } The code above is pretty straight forward -- first we check to make sure this is a POST request, then we make sure there aren't any overriding *AntiForgeryTokenAttributes on the action being executed. If we have a candidate then we call the ValidateAntiForgeryTokenAttribute class directly and execute OnAuthorization() on the current authorization context. Now on our base controller, you could use this new attribute to start protecting your site from CSRF vulnerabilities. [UseAntiForgeryTokenOnPostByDefault] public class ApplicationController : System.Web.Mvc.Controller { }   //Then for all of your controllers public class HomeController : ApplicationController {} What we accomplished If your base controller has the new default anti-forgery token attribute on it, when you don't use <%= Html.AntiForgeryToken() %> in a form (or of course when an attacker doesn't supply one), the POST action will throw the descriptive error message "A required anti-forgery token was not supplied or was invalid". Attack foiled! In summary, I think having an anti-CSRF policy by default is an effective way to protect your websites, and it turns out it is pretty easy to accomplish as well. Enjoy!

    Read the article

  • Verification of requirements question

    - by user970696
    Doing a lot of reading about V&V, I would need to clarify the following. A lot of definitons (less formal ones found in books) define verification like that: Verification: The software should conform to its specification. But then they speak about requirement verification, design verification etc. If I say that these items are "software" in terms of applying the definitons, what should I checked them against, what specification should requirements, which is the basic information, conform to? And one more thing: shouldnt be requirements also validated? To make sure they meets the customer needs? All texts I have speak only about SW validation on the end of the dev.process..

    Read the article

  • Remote Workers...We're Not That Bad!

    - by user12601034
    I work from home a lot – my team is located in different cities and countries, my manager is in a different city, and most of our work is done via conference calls, email and collaboration through Oracle Social Network. We’ve figured out how to be effective and involve team members, regardless of where we are all located. When I mention that I work from home, a lot of my friends will laugh, roll their eyes or use their fingers to make quotation marks around “work from home.” Their belief is that I’m sitting at home, eating bon-bons and watching television. The attempts at humor only multiply when they know that my husband also mostly works from home. So, it was with great joy that I read the Lifehacker article Why Remote Workers Are More (Yes, More) Engaged. I’m not going to re-write the article for you, but four highlights from the article include: Proximity breeds complacency –because communicating with employees sitting next to you is so easy, you may not do it well. Absence makes people try harder to connect – because you have to make an effort to connect to your team, you tend to pay better attention when you do connect Leaders of virtual team make better use of tools – when working remotely, you will use technology (many different forms of it) to connect with your team. This daily use of the tools makes you more proficient with those tools Leaders of far-flung teams maximize the time spent together – getting together takes effort, time and money, so leaders tend to filter out distractions when teams do get together. These points made me happy because I’ve seen the same things play out in my team located around the world. And I’m not saying that a virtual team is more effective than a co-located team – but my virtual team doesn’t have the option of filing into a conference room for a face-to-face meeting whenever we want. Instead, we have to figure out how to work effectively without meeting face-to-face. Am I more engaged as a remote worker? I’d like to think that I am. I’ve been on calls with colleagues at 3am – this would never happen if my only option was to be in the office. I can leave my “office” to pick up my kids from school…and I’m willingly back online after kids are in bed to finish up anything I need to. Oracle Social Network lets me use my iPad to engage with my teammates when I’m waiting at music lessons, the doctor’s office or any place else with a network connection. I feel like I’m more connected with my team, and I feel like I’m more connected with my family life. So yes, I am a remote worker, and I am engaged. If you lead a virtual team, I challenge you to increase the ways that you communicate to effectively engage your team. If you are on a virtual team, I challenge you to think about how you might interact with team members to keep both them and yourself engaged in your work. And if you have some great ideas on how to make virtual teams (and workers) effective and engaged, please share those ideas in the comments! Now, if you’ll excuse me, I need to go get a bon-bon...   :) Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

    Read the article

< Previous Page | 61 62 63 64 65 66 67 68 69 70 71 72  | Next Page >