Search Results

Search found 2926 results on 118 pages for 'reverse engineer'.

Page 65/118 | < Previous Page | 61 62 63 64 65 66 67 68 69 70 71 72  | Next Page >

  • bind9 DNS Ubuntu names pingible on server, but not on Windows Machines?

    - by leeand00
    I setup a DNS server today on Ubuntu, following this tutorial. My intent was to setup my network for dns-name resolving on the private LAN within a single zone (nothing fancy I just want name resolution). I've tested the setup on the DNS server machine itself, and I can ping all the machines listed in the configuration file. I've also configured the Windows Machines on my network, and for some reason they are incapable of pinging by names as was possible on the DNS Server itself. I've tried running nslookup on the Windows DNS clients and I receive and error mentioning the address of the DNS server. DNS forwarding works fine, I'm not having any trouble accessing the internet, the problem only lies within accessing names within the private LAN. Here are my configuration files: options { directory "/var/cache/bind"; // If there is a firewall between you and nameservers you want // to talk to, you may need to fix the firewall to allow multiple // ports to talk. See http://www.kb.cert.org/vuls/id/800113 // If your ISP provided one or more IP addresses for stable // nameservers, you probably want to use them as forwarders. // Uncomment the following block, and insert the addresses replacing // the all-0's placeholder. // forwarders { // 0.0.0.0; // }; forwarders { 8.8.8.8; 8.8.8.4; 74.242.0.12; //68.87.76.178; }; auth-nxdomain no; # conform to RFC1035 listen-on-v6 { any; }; }; /etc/bind/named.conf.options zone "leerdomain.local" { type master; file "/etc/bind/zones/leerdomain.local.db"; notify no; }; zone "2.168.192.in-addr.arpa" { type master; file "/etc/bind/zones/rev.2.168.192.in-addr.arpa"; notify no; }; /etc/bind/named.conf.local Lookup: $TTL 3D @ IN SOA ns.leerdomain.local. admin.leerdomain.local. ( 2010011001 28800 3600 604800 38400 ); leerdomain.local. IN NS ns.leerdomain.local. ns IN A 192.168.2.9 asus IN A 192.168.2.254 www IN CNAME asus vaio IN A 192.168.2.253 iptouch IN A 192.168.2.252 toshiba IN A 192.168.2.251 gw IN A 192.168.2.1 TXT "Network Gateway" /etc/bind/zones/leerdomain.local.db (Validates fine with named-checkzone when validating zone leerdomain.local) Reverse Lookup: $TTL 3D @ IN SOA ns.leerdomain.local. admin.leerdomain.local. ( 201001101 28800 604800 604800 86400 ) IN NS ns.leerdomain.local. 1 IN PTR gw.leerdomain.local. 254 IN PTR asus.leerdomain.local. 253 IN PTR vaio.leerdomain.local. 252 IN PTR iptouch.leerdomain.local. 251 IN PTR toshiba.leerdomain.local. /etc/bind/zones/rev.2.168.192.in-addr.arpa *(Does not validate with named-checkzone when validating zone leerdomain.local gives an error of: zone leerdomain.local/IN: NS 'ns.leerdomain.local' has no address records (A or AAAA) zone leerdomain.local/IN: not loaded due to errors. * Despite not validating bind9 starts without errors in /var/log/syslog I've also configured a few of the windows machines on my network to have the static ip as specified in the lookup and reverse lookup config files. i.e. Using nslookup yields the following results: C:\Users\leeand00>nslookup ns Server: UnKnown Address: 192.168.2.9 *** UnKnown can't find ns: Non-existent domain C:\Users\leeand00>nslookup gw Server: UnKnown Address: 192.168.2.9 Name: gw. Additionally trying to ping by name also fails on machines that are not the DNS Server. Is there something wrong with my configuration of either the nameserver or the Windows Boxes that is keeping me from accessing other machines using names?

    Read the article

  • Cork Board Solution to tack things up on top or to the side of a monitor

    - by Bela
    I'm trying to find some sort of physical product that would either go on the top or the side of an lcd monitor and give me space to tape/push-pin/post it note things for myself. In my head I am picturing an extra space above your monitor 6 inches tall that lets you tape/push pin things up in front of you. For random notes and things I want to keep track of, having them on the top/side of my monitor would keep the space on my desk itself clear, and they would be closer to my field of vision. Does something like this exist? Do I need to rig up something myself? EDIT This is the closest thing I can find so far http://www.unplggd.com/unplggd/diy-project/reverse-engineer-how-to-feel-up-your-monitor-048251

    Read the article

  • What to do with a Blowfish Key?

    - by Encoderer
    I just completed backing up 8 years of my Gmail using http://gmvault.org I selected the --encrypt option which uses Blowfish encryption. According to their site: Emails can be encrypted with the option -e --encrypt. With that option, the Blowfish encryption is used to crypt your emails and chats and the first time you activate it, a secret key is randomly generated and stored in $HOME/.gmvault/token.sec. Keep great care of the secret key as if you loose or delete it your stored emails won't be readable anymore !!! I'm using OSX Lion. I'm a software engineer but far from an encryption expert. What should I do with this key? It seems like leaving it where it is now (alongside the emails) sort of misses the point of encrypting them to begin with.

    Read the article

  • Is there such a thing as "server sliding" (or similar), and if so, what is it?

    - by mahoke
    I am not a network engineer, but rather a translator, so I apologize in advance if this is a rather obvious question to some of you. Normally Google can answer my questions, but in this case I'm coming up blank. If I'm asking this in the wrong forum, please let me know. The text is talking about RADIUS accounting functionality. It says that when there are many (more than 200) authenticated terminals, if a command is issued to forcibly clear the terminals, "sliding to the next RADIUS accounting server may occur" -- the original text literally says "RADIUS accounting server-slide". I think I can basically understand what they are getting at in terms of meaning, but I would like to know whether this is the correct expression to use. I get the impression from my inability to find it simply by Googling that perhaps it's described differently in English.

    Read the article

  • How do we keep Active Directory resilient across multiple sites?

    - by Alistair Bell
    I handle much of the IT for a company of around 100 people, spread across about five sites worldwide. We're using Active Directory for authentication, mostly served to Linux (CentOS 5) systems via LDAP. We've been suffering through a spate of events where the IP tunnel between the two major sites goes down and the secondary domain controller at one site can't contact the primary domain controller at the other. It seems that the secondary domain controller starts denying user authentication within minutes of losing connectivity to the primary. How do we make the secondary domain controller more resilient to downtime? Is there a way for it to cache the entire directory and/or at least keep enough information locally to survive a multi-hour disconnection? (We're all in a single organizational unit if that makes any difference.) (The servers here are Windows Server 2003; don't assume that we set this up correctly. I'm a software engineer, not an IT specialist.)

    Read the article

  • Gateway NE56R & mouse swipe gesture...how to disable?

    - by Anders
    Can anyone tell me how to shut off the swipe gesture mechanism on my computer? It's driving me crazy. I cannot use a single application without having my computer screen minimize every time I move my hand over the mouse following a mouse-click, pointer movement, etc. Having to maximize my spreadsheets, documents, and applications so much is undercutting my productivity. How some software engineer/inventor imagined that this mouse/gesture swipe gimmick would be helpful to computer users is inconceivable to me. It is a massive annoyance. I've found instructions online for disabling this obnoxious feature, but all the instructions involve messing with my registry, which I don't want to do. I will be SO GRATEFUL to any techie who can tell me how to disable this horrible mouse swipe mechanism without having to alter my registry! I'm using a Gateway NE56R Notebook, Windows 7 operating system, and an Inland USB Mouse (model no. 37535). Thank you in advance!

    Read the article

  • Excel "Remove Duplicates" feature does not remove all duplicates

    - by raph82
    When the Data ToolsRemove Duplicates command is used on the following list, some duplicates are not removed: Key 46509 46509 51442 51442 73367 73367 80048 80048 88396 88396 102576 102576 108095 108095 118613 118613 127224 127224 137549 137549 140164 140164 151679 151679 152975 152975 154986 154986 167715 167715 169166 169166 170427 170427 176303 176303 187038 187038 199856 199856 206589 206589 225371 225371 229767 229767 230680 230680 245333 245333 253697 253697 256002 256002 262094 262094 273060 273060 275584 275584 285569 285569 301930 301930 304993 304993 305965 305965 307299 307299 311438 311438 314461 314461 340545 340545 344517 344517 355035 355035 358387 358387 359982 359982 363904 363904 368642 368642 378666 378666 378744 378744 382396 382396 393542 393542 394320 394320 395258 395258 402047 402047 421796 421796 427972 427972 442651 442651 442654 442654 445786 445786 447124 447124 456682 456682 467303 467303 470437 470437 476340 476340 480976 480976 481450 481450 498967 498967 516068 516068 517592 517592 522621 522621 524678 524678 529405 529405 532909 532909 535096 535096 540835 540835 553197 553197 566893 566893 567730 567730 570751 570751 572259 572259 581701 581701 589753 589753 597923 597923 602282 602282 612011 612011 643774 643774 649471 649471 654159 654159 661681 661681 680578 680578 709714 709714 728036 728036 728680 728680 740252 740252 750843 750843 763430 763430 777724 777724 777870 777870 779703 779703 787034 787034 789776 789776 793859 793859 798479 798479 812410 812410 816599 816599 820169 820169 821236 821236 833511 833511 833701 833701 845925 845925 854408 854408 882853 882853 891710 891710 906251 906251 929802 929802 982039 982039 984503 984503 984539 984539 987889 987889 997188 997188 1002869 1002869 1018493 1018493 1020735 1020735 1028780 1028780 1032460 1032460 1047306 1047306 1052136 1052136 1054482 1054482 1062633 1062633 1066509 1066509 1069500 1069500 1075339 1075339 1082282 1082282 1100206 1100206 1105407 1105407 1111409 1111409 1112175 1112175 1112407 1112407 1113400 1113400 1117243 1117243 1121732 1121732 1152461 1152461 1153727 1153727 1157252 1157252 1163384 1163384 1195324 1195324 1197373 1197373 1201828 1201828 1202786 1202786 1216328 1216328 1223541 1223541 1225848 1225848 1228595 1228595 1239281 1239281 1264378 1264378 1267348 1267348 1291510 1291510 1309891 1309891 1321106 1321106 1322886 1322886 1327690 1327690 1344145 1344145 1346250 1346250 1352350 1352350 1357920 1357920 1363386 1363386 1365046 1365046 1370383 1370383 1376666 1376666 1383834 1383834 1414472 1414472 1418967 1418967 1419811 1419811 1421587 1421587 1432639 1432639 1442854 1442854 1455236 1455236 1461896 1461896 1466376 1466376 1477670 1477670 1480154 1480154 1481801 1481801 1498209 1498209 1504776 1504776 1511904 1511904 1017854_447 1017854_447 1085496_19 1085496_19 1280601_77 1280601_77 1350662_135 1350662_135 141944_382 141944_382 1525893_483 1525893_483 455968_177 455968_177 469495_157 469495_157 641583_74 641583_74 704267_63 704267_63 709992_199 709992_199 819399_224 819399_224 832188_358 832188_358 857189_467 857189_467 898328_334 898328_334 91033_245 91033_245 960992_341 960992_341 999706_361 999706_361 BLA1048669 BLA1048669 BLA1052457 BLA1052457 BLA1055176 BLA1055176 BLA1060585 BLA1060585 BLA1067125 BLA1067125 BLA107601 BLA107601 BLA1087509 BLA1087509 BLA1097390 BLA1097390 BLA1122471 BLA1122471 BLA1126436 BLA1126436 BLA112694 BLA112694 BLA1148652 BLA1148652 BLA1149504 BLA1149504 BLA1155256 BLA1155256 BLA1222348 BLA1222348 BLA1225575 BLA1225575 BLA1227779 BLA1227779 BLA124071 BLA124071 BLA1247411 BLA1247411 BLA1258830 BLA1258830 BLA1281625 BLA1281625 BLA128165 BLA128165 BLA1305848 BLA1305848 BLA1307751 BLA1307751 BLA130926 BLA130926 BLA1334270 BLA1334270 BLA1335674 BLA1335674 BLA1340102 BLA1340102 BLA1345080 BLA1345080 BLA1353398 BLA1353398 BLA1369834 BLA1369834 BLA1424977 BLA1424977 BLA142669 BLA142669 BLA1429760 BLA1429760 BLA1443592 BLA1443592 BLA1447085 BLA1447085 BLA1453639 BLA1453639 BLA1456355 BLA1456355 BLA1458745 BLA1458745 BLA148663 BLA148663 BLA1494220 BLA1494220 BLA1522880 BLA1522880 BLA152562 BLA152562 BLA1548628 BLA1548628 BLA182644 BLA182644 BLA186707 BLA186707 BLA188073 BLA188073 BLA199127 BLA199127 BLA207148 BLA207148 BLA209939 BLA209939 BLA232119 BLA232119 BLA240725 BLA240725 BLA267275 BLA267275 BLA303829 BLA303829 BLA346044 BLA346044 BLA348268 BLA348268 BLA367863 BLA367863 BLA386897 BLA386897 BLA390799 BLA390799 BLA415724 BLA415724 BLA425291 BLA425291 BLA427093 BLA427093 BLA462355 BLA462355 BLA46821 BLA46821 BLA477637 BLA477637 BLA501111 BLA501111 BLA522126 BLA522126 BLA530906 BLA530906 BLA576525 BLA576525 BLA639361 BLA639361 BLA644530 BLA644530 BLA65754 BLA65754 BLA670003 BLA670003 BLA687525 BLA687525 BLA709367 BLA709367 BLA714281 BLA714281 BLA719328 BLA719328 BLA736457 BLA736457 BLA759669 BLA759669 BLA76056 BLA76056 BLA767666 BLA767666 BLA780853 BLA780853 BLA793029 BLA793029 BLA796639 BLA796639 BLA803743 BLA803743 BLA815298 BLA815298 BLA828243 BLA828243 BLA864030 BLA864030 BLA864110 BLA864110 BLA882892 BLA882892 BLA885665 BLA885665 BLA897478 BLA897478 BLA903861 BLA903861 BLA91627 BLA91627 BLA925523 BLA925523 BLA928243 BLA928243 BLA932395 BLA932395 BLA935341 BLA935341 BLA940705 BLA940705 BLA966386 BLA966386 A message is displayed indicating 293 duplicate values were removed and 307 unique values remain. 7 duplicates are not removed: 1280601_77 1525893_483 455968_177 469495_157 641583_74 704267_63 709992_199 The initial list consist of Excel-ordered values of: numbers between 40,000 and 1,500,000 numbers in the same range with and added _ and a 1-999 suffix numbers in the same range prefixed with BLA Each value is present exactly twice. There are no formula involved. I already checked for extra spaces. Immediately reapplying the Remove Duplicates command does not remove the remaining duplicate values. Reapplying the Remove Duplicates command after a reverse-sort seems to remove the remaining duplicates. Reverse-sorting before using the first Remove Duplicates changes the result (213 duplicate values removed and 387 unique values remained), only in the non-suffixed non-prefixed group. Can you reproduce this bug in Excel 2007 like I do? What triggers it? Could it the composite (numbers and text) data set? I'm not looking for alternatives. I want to know when not to use the feature and revert to already known (Excel 2003 era) alternatives.

    Read the article

  • Simple Cisco ASA 5505 config issue

    - by Ben Sebborn
    I have a Cisco ASA setup with two interfaces: inside: 192.168.2.254 / 255.255.255.0 SecLevel:100 outside: 192.168.3.250 / 255.255.255.0 SecLevel: 0 I have a static route setup to allow PCs on the inside network to access the internet via a gateway on the outside interface (3.254): outside 0.0.0.0 0.0.0.0 192.168.3.254 This all works fine. I now need to be able to access a PC on the outside interface (3.253) from a PC on the inside interface on port 35300. I understand I should be able to do this with no problems, as I'm going from a higher security level to a lower one. However I can't get any connection. Do I need to set up a seperate static route? Perhaps the route above is overriding what I need to be able to do (is it routing ALL traffic through the gateway?) Any advice on how to do this would be apprecaited. I am configuring this via ASDM but the config can be seen as below: Result of the command: "show running-config" : Saved : ASA Version 8.2(5) ! hostname ciscoasa domain-name xxx.internal names name 192.168.2.201 dev.xxx.internal description Internal Dev server name 192.168.2.200 Newserver ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 shutdown ! interface Ethernet0/4 shutdown ! interface Ethernet0/5 shutdown ! interface Ethernet0/6 shutdown ! interface Ethernet0/7 shutdown ! interface Vlan1 nameif inside security-level 100 ip address 192.168.2.254 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address 192.168.3.250 255.255.255.0 ! ! time-range Workingtime periodic weekdays 9:00 to 18:00 ! ftp mode passive clock timezone GMT/BST 0 clock summer-time GMT/BDT recurring last Sun Mar 1:00 last Sun Oct 2:00 dns domain-lookup inside dns server-group DefaultDNS name-server Newserver domain-name xxx.internal same-security-traffic permit inter-interface object-group service Mysql tcp port-object eq 3306 object-group protocol TCPUDP protocol-object udp protocol-object tcp access-list inside_access_in extended permit ip any any access-list outside_access_in remark ENABLES OUTSDIE ACCESS TO DEV SERVER! access-list outside_access_in extended permit tcp any interface outside eq www time-range Workingtime inactive access-list outside_access_in extended permit tcp host www-1.xxx.com interface outside eq ssh access-list inside_access_in_1 extended permit tcp any any eq www access-list inside_access_in_1 extended permit tcp any any eq https access-list inside_access_in_1 remark Connect to SSH services access-list inside_access_in_1 extended permit tcp any any eq ssh access-list inside_access_in_1 remark Connect to mysql server access-list inside_access_in_1 extended permit tcp any host mysql.xxx.com object-group Mysql access-list inside_access_in_1 extended permit tcp any host mysql.xxx.com eq 3312 access-list inside_access_in_1 extended permit object-group TCPUDP host Newserver any eq domain access-list inside_access_in_1 extended permit icmp any any access-list inside_access_in_1 remark Draytek Admin access-list inside_access_in_1 extended permit tcp any 192.168.3.0 255.255.255.0 eq 4433 access-list inside_access_in_1 remark Phone System access-list inside_access_in_1 extended permit tcp any 192.168.3.0 255.255.255.0 eq 35300 log disable pager lines 24 logging enable logging asdm warnings logging from-address [email protected] logging recipient-address [email protected] level errors mtu inside 1500 mtu outside 1500 ip verify reverse-path interface inside ip verify reverse-path interface outside ipv6 access-list inside_access_ipv6_in permit tcp any any eq www ipv6 access-list inside_access_ipv6_in permit tcp any any eq https ipv6 access-list inside_access_ipv6_in permit tcp any any eq ssh ipv6 access-list inside_access_ipv6_in permit icmp6 any any icmp unreachable rate-limit 1 burst-size 1 icmp permit any outside no asdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 1 0.0.0.0 0.0.0.0 static (inside,outside) tcp interface www dev.xxx.internal www netmask 255.255.255.255 static (inside,outside) tcp interface ssh dev.xxx.internal ssh netmask 255.255.255.255 access-group inside_access_in in interface inside control-plane access-group inside_access_in_1 in interface inside access-group inside_access_ipv6_in in interface inside access-group outside_access_in in interface outside route outside 0.0.0.0 0.0.0.0 192.168.3.254 10 route outside 192.168.3.252 255.255.255.255 192.168.3.252 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 timeout floating-conn 0:00:00 dynamic-access-policy-record DfltAccessPolicy aaa authentication telnet console LOCAL aaa authentication enable console LOCAL

    Read the article

  • Free Cloud Mind Map Solution

    - by Zekta Chan
    As a Software Engineer we had a lot of discussion on SE design. Although we sync every document on the development process on Google Doc, mind map just didn’t fit in Google doc yet. The best we can do is to store a copy and share it online. To me, Mind map is an ir-replaceable piece of tools (yet) as agile note taking tools. And an eFormat is even greater than a paper one, due to the portability and extensibility. Does anyone have a good solution on “cloud-sharing” mind map? (We are using FreeMind at the moment) Thanks

    Read the article

  • Vlan and Switch setting - dummy

    - by Andras Sebestyen
    I need to speak tomorrow the network engineer and I would like to understand his so apologise for the Dummy question: In the school we have a cab with a 24 port Netgear manageable switch with an admin and curriculum VLAN settings. Usually, as I over heard, in the morning and around 4.30pm there are a slowdown period on the computers which connect to this switch. No one could track this back yet. Questions: What is the best way to track back this slowdown Would it be a temporary solution to physical separate the two network with 2 switches If that would work how can I link them together to be able to see the curriculum from the admin side. Do I need an extra router then? Too many questions but I have no clue where to start and the gentleman will be paid by hours... can you see where I am coming from?:) Could you guide me in the right direction please? Any comment would be appreciated and please send links if you down vote the question:)

    Read the article

  • Looking for a reliable web provider that supports ASP.NET? Shared LAMP account a plus.

    - by Cory Charlton
    My title is probably not very clear but here's the deal. I'm a software engineer with experience in many languages but my current focus is Windows/Web applications using C# and .NET. I'm currently running a personal blog using WordPress and love it. I need to setup a website for my consulting company and, while I enjoy the canned benefits of a CMS like WordPress, would like to build a custom ASP.NET site. Either way my current LAMP host is not secure so I'm looking to switch and looking for a reliable alternative. My ultimate wish list of requirements would be a cost-effective (currently spending ~$120/yr for web+domain hosting) host that would allow me to deploy my own ASP.NET code and host a WordPress blog (IIS w/ PHP to external MySQL or separate LAMP site). Thanks in advance for your recommendations (Google is not good for this type of search :-D) Edit: I'm fine if I have to ditch WordPress. Really I'm just looking for a good ASP.NET host, the WordPress compatibility would be a plus.

    Read the article

  • who has the best online prep MCSE study materials?

    - by phill
    I'm studying for my Microsoft Certified Systems Engineer (MCSE) on my own and was wondering who you could recommend for study materials? I did shell out a bunch of money for a local class and when it came to taking the test, there were a slew of topics which weren't even covered. For example, in my 070-293 test, they didn't even touch such as Certificates, how to setup clusters, sql server clustering, etcs. I realize there is a bunch out there such as cbtnuggets, preplogic, etcs. Which online preps do you suggest best preps you for the tests before I spend any more money on this stuff? thanks in advance

    Read the article

  • Can Windows tell me what is using my USB drive?

    - by PP
    Being the good citizen I am, I left-click on the "Safely Remove Hardware" icon in my taskbar, and select my USB drive to dismount. Then I get the message: Windows can't stop your 'Generic volume device because it is in use. Close any programs or windows that might be using the device, and then try again later. Of course, being the Operating System, it knows exactly what applications are using my device. So why won't it tell me? As usual, I always end my Vista questions with this plea: anyone know a Microsoft Engineer I can kick?

    Read the article

  • Should app config files be in jboss/bin directory?

    - by djangofan
    I am a Integration Engineer for a software company. My development team has generated various jboss .ear applications that rely on configuration files being in the jboss/bin directory and setting the CLASSPATH externally using batch files (on Windows from an external LIB directory) rather than using jboss's internally loaded classes. Is this the right/standard way of doing things? Would some other location be better (for the config files) such as jboss/server/instancename/deploy or some other directory? Any opinons on how I can direct my development team to doing things in a best practices fashion?

    Read the article

  • Forwarding rsyslog to syslog-ng, with FQDN and facility separation

    - by Joshua Miller
    I'm attempting to configure my rsyslog clients to forward messages to my syslog-ng log repository systems. Forwarding messages works "out of the box", but my clients are logging short names, not FQDNs. As a result the messages on the syslog repo use short names as well, which is a problem because one can't determine which system the message originated from easily. My clients get their names through DHCP / DNS. I've tried a number of solutions trying to get this working, but without success. I'm using rsyslog 4.6.2 and syslog-ng 3.2.5. I've tried setting $PreserveFQDN on as the first directive in /etc/rsyslog.conf (and restarting rsyslog of course). It seems to have no effect. hostname --fqdn on the client returns the proper FQDN, so the problem isn't whether the system can actually figure out its own FQDN. $LocalHostName <fqdn> looked promising, but this directive isn't available in my version of rsyslog (Available since 4.7.4+, 5.7.3+, 6.1.3+). Upgrading isn't an option at the moment. Configuring the syslog-ng server to populate names based on reverse lookups via DNS isn't an option. There are complexities with reverse DNS and the public cloud. Specifying for the forwarder to use a custom template seems like a viable option at first glance. I can specify the following, which causes local logging to begin using the FQDN on the syslog-ng repo. $template MyTemplate, "%timestamp% <FQDN> %syslogtag%%msg%" $ActionForwardDefaultTemplate MyTemplate However, when I put this in place syslog-ng seems to be unable to categorize messages by facility or priority. Messages come in as FQDN, but everything is put in to user.log. When I don't use the custom template, messages are properly categorized under facility and priority, but with the short name. So, in summary, if I manually trick rsyslog into including the FQDN, priority and facility becomes lost details to syslog-ng. How can I get rsyslog to do FQDN logging which works properly going to a syslog-ng repository? rsyslog client config: $ModLoad imuxsock.so # provides support for local system logging (e.g. via logger command) $ModLoad imklog.so # provides kernel logging support (previously done by rklogd) $ActionFileDefaultTemplate RSYSLOG_TraditionalFileFormat *.info;mail.none;authpriv.none;cron.none /var/log/messages authpriv.* /var/log/secure mail.* -/var/log/maillog cron.* /var/log/cron *.emerg * uucp,news.crit /var/log/spooler local7.* /var/log/boot.log $WorkDirectory /var/spool/rsyslog # where to place spool files $ActionQueueFileName fwdRule1 # unique name prefix for spool files $ActionQueueMaxDiskSpace 1g # 1gb space limit (use as much as possible) $ActionQueueSaveOnShutdown on # save messages to disk on shutdown $ActionQueueType LinkedList # run asynchronously $ActionResumeRetryCount -1 # infinite retries if host is down *.* @syslog-ng1.example.com *.* @syslog-ng2.example.com syslog-ng configuration (abridged for brevity): options { flush_lines (0); time_reopen (10); log_fifo_size (1000); long_hostnames (off); use_dns (no); use_fqdn (yes); create_dirs (no); keep_hostname (yes); }; source src { unix-stream("/dev/log"); internal(); udp(ip(0.0.0.0) port(514)); }; destination per_host_destination { file( "/var/log/syslog-ng/devices/$HOST/$FACILITY.log" owner("root") group("root") perm(0644) dir_owner(root) dir_group(root) dir_perm(0775) create_dirs(yes)); }; log { source(src); destination(per_facility_destination); };

    Read the article

  • Odd domain switching behavior in Firefox and Chrome

    - by Jeremy Detrempe
    We have different development severs and a production server. Testing is done in the development servers. As a QA engineer, I'm switching between these servers quite often throughout the day. In Chrome, sometimes I need to reload a page a few times to get it to pull from the newly switched server. In Firefox, sometimes I need to quit the browser in order to get it to pull from the newly switched server. (We have small tags that indicate which server you are pulling from, which is how I know in-browser.) Why does that happen? I'd love to know how that happens (maybe what it's called?) and what the best way to deal with it is. (I know that Firefox has an extension for domain switching; is that the best solution?)

    Read the article

  • Changing Internet connection on ISA Server 2000

    - by garyb32234234
    Hi We are getting a new internet connection installed and will need to unplug the old one and connect this to our ISA Server 2000. Will this be a simple swap out job? We will be given a new ip, which i know i will have to enter into the external network card TCP/IP page. I will also be given the default gateway to enter. The ISP engineer said we may have to reset the ARP? cache, if we dont know how we will have to reset the ISA server? Has anyone any experience? The current connection is with the same ISP but it was owned by the business park were we are located and they linked up an ethernet port to what i assume is their own router. Hope you can help, i know that ISA 2000 is somewhat less easy to use than the newer versions.

    Read the article

  • Decreasing lagging on router, while gaming

    - by user2699451
    I had absolutely no idea where to post this question and get a professional answer for it but here goes... Okay, so I guess everyone whos is reading this had played online, and so I was playing LoL again tonight and my brother decided that now was a great time to go on youtube and start watching a movie, so my ping (connecting from South Africa to EU west server) is around 190-220 average, however it started spiking to 2000 and average was 600-800, so it arised the question, how ther hell can I "kick" him off for the time being I tried reasoning it out with him but its like playing chess with a pigeon, he's studying to be an engineer, and I just cant win an argument with him, so i need to step it up a level... I have in the past used the aireplay method by sending deauth packets but it only helped so much, is there another way of either kicking a peer of the local wifi or decreasing the lag spikes while in session or even splitting the bandwidth equally in 2 or 3,etc What do I do p.s. sorry if off topic, if it is not appropriate, just say which website will be able to help or assist me...

    Read the article

  • SSL certs or intermediate for DMZ

    - by rex
    I've been tasked with deploying and managing load balancers covering internal servers and DMZ servers. I have no experience with this, and this is a first for my organization as well. Balancers are up, running, legit. Currently we are using a self-signed cert for Exchange/OWA. I know that we should have a cert signed by a CA, but the balancer has options for SSL cert or intermediate cert, and I'm unclear on the difference, or on which we need. We will be hosting Lync, Exchange and some custom apps in the DMZ. disclaimer: Apologies up front, I'm desktop support. I recently passed my Net+. It seems that has made me the network engineer in this organization.

    Read the article

  • Rollback driver in Windows via command line

    - by ultrasawblade
    I have a remote system in which I've updated the Nvidia graphics driver, but now RDPDD.dll, which I'm guessing stands for RDP Display Driver, will not load (found this out via Event Viewer). I can use Sysinternal's Psexec to execute commands though. I'm sure something has gone very wrong and the user of this system (a CAD engineer) won't be able to use his system normally. I've tried two remote reboots and that has not resolved the issue. So I would like to use the "Roll Back" option for the Nvidia driver in the device manager. Is there a command-line way of doing this?

    Read the article

  • Domain Controller Placement

    - by Matt
    I've been working through some Exchange training documentation (the official MS e-learning package) and all of the design scenarios allude to placing at least one DC from your forest root domain in every site. I'm not sure whether this just relates to Exchange, but I can think of a number of issues we experience in our forest that would be resolved by this. For example, a Microsoft support engineer has stated that EVERY client in a child domain (i.e. all workstations and member servers) need access to a forest root DC to check certificate/template permissions, even on a subordinate CA. I have attempted to locate documentation or guidelines from Microsoft on this, but have not been able to find anything. I found the Domain Controller Placement guide, but it's only a form - you would use it to document where you will place your DCs, but it doesn't give any guidance on where you should deploy them. Does anyone know where, or if, I can find any such documentation?

    Read the article

  • Suggestions for someone wanting to become a Laptop Reseller

    - by Josh B.
    First of all, to give you a little background... I have had my Microsoft A+ for several years now. I used to run a small business repairing Xbox 360 consoles and I am currently a Network Engineer for a company in Ohio. I definitely know my way around a computer. I miss running a small business on the side and I'd like to get something going again. There is a really high demand in my area for Laptops and I was thinking about starting a small Laptop store out of my house. What is the best way to do this? I was assuming that the best way would be to buy barebones systems and build them yourself. If this is the best method, I would be very interested in any resources to get parts and such. Apparently Laptop parts aren't the easiest thing to come by (especially at a good price). Does anyone have any suggestions about how to get something like this going?

    Read the article

  • Setting up a software company...

    - by ThePower
    Hi all, I am a Software Engineer who wants to start developing and selling a range of products. I have some in depth ideas that I would like to go on to develop individually and sell under my own company name. Does anyone with any experience in this process have any information with regards to the route to take and process of setting things up so that I may be able to sell my applications? Also any information regarding copyrighting the material would be excellent. I am looking for the easiest way to set up a business that will allow me to have a name in which I can start selling applications to a variety of sources under. I didn't quite know which site to post this on so I hope it is relevant for superuser. Regards, Lloyd

    Read the article

  • Setting WMI permissions remotely on windows server 2003

    - by user41507
    Hello. I am a programmer , I don know the server well. I made a simple program checking the service on the remote server is started or not. by using this(http://msdn.microsoft.com/en-us/library/dwd0y33x(v=VS.90).aspx) but the permission should be set. and I can't find any document via the internet. except one document. http://msdn.microsoft.com/en-us/library/aa393266(VS.85).aspx but the engineer say that 'tell me exactly what I do. there are many DCOM are they any nice document to show him? thanks in advance

    Read the article

  • What is the formula for HughesNet FAP calculation?

    - by JohnFx
    I am somewhat frustrated with the only FAP monitor I have found on the net and discovered because it relies on a running count of bandwidth usage which (1) requires a service in the background; and (2) Tends to get inaccurate over time. Given that there is a diagnostics page on the firmware of the modem that tells the exact usage per hour, I was planning on writing a more accurate version with a better UI. However, it appears that HughesNet keeps the exact formula for calculating whether you are in FAP a secret. I have no idea why they wouldn't be more forthcoming with this information. Wondering if anyone out in SU-land had done some trial and error testing to reverse engineer the formula or had some inside knowledge to share.

    Read the article

< Previous Page | 61 62 63 64 65 66 67 68 69 70 71 72  | Next Page >