Search Results

Search found 8247 results on 330 pages for 'smart phone'.

Page 65/330 | < Previous Page | 61 62 63 64 65 66 67 68 69 70 71 72  | Next Page >

  • Is it possible to shrink the size of an HP Smart Array logical drive?

    - by ewwhite
    I know extension is quite possible using the hpacucli utility, but is there an easy way to reduce the size of an existing logical drive (not array)? The controller is a P410i in a ProLiant DL360 G6 server. I'd like to reduce logicaldrive 1 from 72GB to 40GB. => ctrl all show config detail Smart Array P410i in Slot 0 (Embedded) Bus Interface: PCI Slot: 0 Serial Number: 5001438006FD9A50 Cache Serial Number: PAAVP9VYFB8Y RAID 6 (ADG) Status: Disabled Controller Status: OK Chassis Slot: Hardware Revision: Rev C Firmware Version: 3.66 Rebuild Priority: Medium Expand Priority: Medium Surface Scan Delay: 3 secs Surface Scan Mode: Idle Queue Depth: Automatic Monitor and Performance Delay: 60 min Elevator Sort: Enabled Degraded Performance Optimization: Disabled Inconsistency Repair Policy: Disabled Wait for Cache Room: Disabled Surface Analysis Inconsistency Notification: Disabled Post Prompt Timeout: 15 secs Cache Board Present: True Cache Status: OK Accelerator Ratio: 25% Read / 75% Write Drive Write Cache: Enabled Total Cache Size: 512 MB No-Battery Write Cache: Disabled Cache Backup Power Source: Batteries Battery/Capacitor Count: 1 Battery/Capacitor Status: OK SATA NCQ Supported: True Array: A Interface Type: SAS Unused Space: 412476 MB Status: OK Logical Drive: 1 Size: 72.0 GB Fault Tolerance: RAID 1+0 Heads: 255 Sectors Per Track: 32 Cylinders: 18504 Strip Size: 256 KB Status: OK Array Accelerator: Enabled Unique Identifier: 600508B1001C132E4BBDFAA6DAD13DA3 Disk Name: /dev/cciss/c0d0 Mount Points: /boot 196 MB, / 12.0 GB, /usr 8.0 GB, /var 4.0 GB, /tmp 2.0 GB OS Status: LOCKED Logical Drive Label: AE438D6A5001438006FD9A50BE0A Mirror Group 0: physicaldrive 1I:1:1 (port 1I:box 1:bay 1, SAS, 146 GB, OK) physicaldrive 1I:1:2 (port 1I:box 1:bay 2, SAS, 146 GB, OK) Mirror Group 1: physicaldrive 1I:1:3 (port 1I:box 1:bay 3, SAS, 146 GB, OK) physicaldrive 1I:1:4 (port 1I:box 1:bay 4, SAS, 146 GB, OK) SEP (Vendor ID PMCSIERA, Model SRC 8x6G) 250 Device Number: 250 Firmware Version: RevC WWID: 5001438006FD9A5F Vendor ID: PMCSIERA Model: SRC 8x6G

    Read the article

  • Website hosted on my virtualbox web server not displaying images or applying css when viewed through phone

    - by WebweaverD
    I would really appreciate it if someone could help me. Please let me know if you need more info in the comments. My Set Up I have a windows 7 pc. On it I run a virtual box VM with a ubuntu 12 guest os and LAMP setup. I share files between the two machines using samba from linux to windows and using windows file sharing (Workgroup) the other way round. The vm is set up with a bridged network adapter and can happily serve web pages to my host machine. I use DHCP reservations on my home wireless router/modem to reserve an ip for the vm and give it a sitename.dev in my windows host file so I can access it at sitename.dev through the browser. The Problem So far so good but I have a dev project which needs a lot of mobile template development, now obviously I can use a browser plugin to simulate a mobile device but I would like to be able to see the real thing easily on my phone during development. So ideally I would like a similar setup on my iphone to my windows setup Now I'm not great on networking and dont have much experience with web server set up. So when I typed the ip of my virtual box into my iphone i wasnt expecting to see anything. I was pleasantly surprised when my site loaded up. The javascript even seems to be running but the images and css are not happening. My Question 1) What is happening here, is it something to do with the bridged set up on the vm network? 2)How do I make the sites load properly through my phone Notes I've also tried another phone. The same sites viewed on live servers work fine.

    Read the article

  • Silverlight Cream for June 21, 2011 -- #1110

    - by Dave Campbell
    In this Issue: Colin Eberhardt, Kunal Chowdhury(-2-), Peter Kuhn(-2-, -3-), Mike Gold, WindowsPhoneGeek, Nigel Sampson, Paul Sheriff, Dhananjay Kumar, and Erno de Weerd. Above the Fold: Silverlight: "Silverlight Debug Helper" Peter Kuhn3 WP7: "Metro In Motion #8 – AutoCompleteBox Reveal Animation" Colin Eberhardt Shoutouts: Check out the Top 5 from my friends at SilverlightShow from last week: SilverlightShow for June 13 - 19, 2011 From SilverlightCream.com: Metro In Motion #8 – AutoCompleteBox Reveal Animation Colin Eberhardt found yet another 'Metro In Motion' to duplicate... this one is the auto-complete effect seen in the WP7 email client... check out the video on the post! Windows Phone 7 (Mango) Tutorial - 16 - How to Create a WP7 Alarm Application? Kunal Chowdhury has a couple more of his Mango tutorials up... number 16 (!) is on creating an Alarm app using scheduled tasks. Windows Phone 7 (Mango) Tutorial - 17 - How to Create a WP7 Reminder Application? Kunal Chowdhury's latest is number 17 in the Mango series and he's discussing the Reminder class which is part of the Scheduler namespace. Silverlight Debug Helper Peter Kuhn has deployed a new version of his "Silverlight Debug Helper"... this time he's added support for FireFox and Chrome. Getting ready for the Windows Phone 7 Exam 70-599 (Part 3) Peter Kuhn also has Part 3 of his series posted at SilverlightShow on getting ready for the WP7 exam. XNA for Silverlight developers: Part 13 - Mango (2) Finally, Peter Kuhn's latest XNA for Silverlight developers tutorial is up at SilverlightShow and is the 2nd Mango post for game devs. Detecting Altitude using the WP7 Phone WindowsPhoneGeek apparently turned the reigns of his blog over to Mike Gold for this post about Altitude detection on the WP7. Windows Phone Mango: Getting Started with MVVM in 10 Minutes If you're out there and still haven't gotten your head around MVVM, or want to take another look at why you're beating yourself up doing it [ :) ]... WindowsPhoneGeek has a quick write-up on MVVM and WP7.1 apps Creating app promotional videos Nigel Sampson details how he uses Expression Encoder to produce the app videos he has on his blog for his WP7* apps. Sort Data in Windows Phone using Collection View Source Paul Sheriff's latest post is up, and is another WP7 post. This time on how to sort the data you consume by using a CollectionViewSource object in XAML and not write any code! Viewing Flickr Images on Windows 7.1 Phone or Mango Phone Dhananjay Kumar has a tutorial up for WP7.1 showing how to use the Flickr REST service to display images on your device. Windows Phone 7: Drawing graphics for your application with Inkscape – Part II: Icons Part 2 of Erno de Weerd's Trilogy on Drawing graphics for your WP7* apps in Inkscape is up... this tutorial is all about icons... good stuff! Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

    Read the article

  • Silverlight Cream for February 05, 2011 -- #1041

    - by Dave Campbell
    In this Issue: Peter Kuhn, Mike Ormond(-2-, -3-), WindowsPhoneGeek, Daniel N. Egan, Phil Middlemiss(-2-), Max Paulousky, Michael Washington. Above the Fold: Silverlight: "Designing for Browser-Zoom: Part 2" Phil Middlemiss WP7: "Talking about Converters in WP7 | Coding4fun toolkit converters in depth" WindowsPhoneGeek Lightswitch: "LightSwitch: Can We Handle The Truth?" Michael Washington Shoutouts: András Velvárt has a video up of some awesome changes he has planned for SurfCube, check it out: SurfCube V2 - 3D Web Browser for Windows Phone 7, now with tabs! From SilverlightCream.com: Silverlight for keyboard junkies Peter Kuhn has a post up talking about the issues surrounding trying to use the tab key to navigate between controls... and follows it up with a behavior that resolves it. Windows Phone 7 Content On Demand Mike Ormond has a batch of WP7 Videos up... this first is "Windows Phone 7: A Different Kind of Phone" with Andrej Radinger. Windows Phone 7 Content on Demand Pt 2 Mike Ormond's 2nd WP7 video is "Understanding the Windows Phone 7 Development Tools and Getting Started" with Maarten Struys Windows Phone 7 Content on Demand Pt 3 Mike Ormond's 3rd WP7 Content on Demand is "Games Programming on Windows Phone 7 with Silverlight and XNA" with Rob Miles Talking about Converters in WP7 | Coding4fun toolkit converters in depth WindowsPhoneGeek is discussing value converters in his latest post... value converters for WP7... and the ones in the Coding4Fun toolkit to be exact... everything you wanted to know about them but didn't know to ask :) WP7 Developer Tools–Jan Update Daniel N. Egan has information up about the new WP7 Developer Tools release. Designing for Browser-Zoom: Part 1 Phil Middlemiss has both parts of a series on Browser Zoom up... this first part covers the zoom and different pieces involved. Designing for Browser-Zoom: Part 2 Phil Middlemiss's part 2 shows us some design considerations and visual states, including an attached behavior you can use in Blend to respond to the zoom event. Windows Phone Copy-Paste: How It Looks and Works Max Paulousky has the first post I've seen on WP7 Copy/Paste up... of course it's still in the emulator, but hey... that's better than nothing, right? LightSwitch: Can We Handle The Truth? Have you been playing with Lightswitch? Well... Michael Washington has, and it's got his interest up far enough that he's waving the flags trying to attract everyone else over there as well... see if you agree. Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

    Read the article

  • Silverlight Cream for December 26, 2010 -- #1015

    - by Dave Campbell
    In this all-submittal Issue: Michael Washington(-2-), Ian T. Lackey(-2-, -3-), Sandrino Di Mattia, Colin Eberhardt(-2-), and Antoni Dol. Above the Fold: Silverlight: "A Style for the Silverlight CoverFlow Control Slider" Antoni Dol WP7: "Getting the right behaviors in your Phone 7 App – Part 1 Phone Home" (and the other two parts) Ian T. Lackey Silverlight/WPF: "A Simplified Grid Markup for Silverlight and WPF" Colin Eberhardt Shoutouts: Dennis Doomen has updated his Coding Guidelines and provided a new WhitePaper, A4 cheat sheet, and VS2010 rule sets: December Update of the Coding Guidelines for C# 3.0 and C# 4.0 From SilverlightCream.com: Windows Phone 7: Saving Data when Keyboard is visible MIchael Washington takes a possible desktop approach to a data-saving issue on WP7... good solution, and one of the commenters brought up another. Windows Phone 7 View Model (MVVM) ApplicationBar Since I'm catching up, there's another post by Michael Washington... this one is looking at the WP7 ApplicationBar, and issues if you're trying to stay MVVM-proper. Michael gets around that by creating the AppBar with a behavior, and shares with all of us! Getting the right behaviors in your Phone 7 App – Part 1 Phone Home Ian T. Lackey has begun a series where he's packaging common tasks into reusable behaviors. First up is a phone dialer launching action that can be dropped on any control in your app. Getting the right behaviors in your Phone 7 App – Part 2 Binding & Browsing In his next post, Ian T. Lackey digs into the WebBrowserTask and provides a behavior allowing you to launch a browser session straight to an URL from any WP7 control. Getting the right behaviors in your Phone 7 App – Part 3 Email ‘em In his last post (all in one day), Ian T. Lackey looks at EmailComposeTask, ending up with a behavior to pre-populate EmailAddress and Subject. Cracking a Microsoft contest or why Silverlight-WCF security is important Sandrino Di Mattia was working on an app while also having a page up for a MSDN/TechNet game, and noticed some interesting WCF traffic that he was easily able to get access to. A Simplified Grid Markup for Silverlight and WPF Colin Eberhardt built us all an attached property for the Grid control that bails us out from the ugly layout we always have to put into position... oh, also for WPF! #uksnow #silverlight The Movie! – Happy Christmas Colin Eberhardt also took some time to have fun with his Twitter/BingMaps mashup for the UKSnow hashtag... you can now playback the snowfall reports, and mouse-over the snowflakes to see the original tweet... very cool stuff, Colin! A Style for the Silverlight CoverFlow Control Slider Antoni Dol got tired of the Silverlight Slider in the CoverFlow control and crafted a very nice-looking style for the Slider ... check it out and grab the source. Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

    Read the article

  • Bluetooth Dial-Up Networking using Blueman

    - by leemes
    I want to configure a dial up network connection via bluetooth to my phone in order to access the internet. I use Lubuntu 12.04 (Ubuntu with LXDE) which has the Network Manager Applet and Blueman applet installed. I guess these are the same tools than on an Ubuntu installation, hence I ask my question on this site. My phone is a Sony Ericsson W810i, my laptop is a Lenovo S10-2, my mobile phone provider is o2 Germany. I scanned for my mobile phone using the Blueman applet. I connected the dial-up network via the context menu - Serial Ports - Dial-up Networking. A notification bubble says that the connection is available on the interface named ppp0. ipconfig is telling something different: There is no ppp0 or something similar. I only see my eth0 (wired ethernet), eth1 (wifi) and lo interfaces. Of course, I can't ping google.com as the interface really seems to be not present at all. When the dial-up network is being connected, my mobile phone says that it connects to the internet. Afterwards, I see the active connection on the phone's screen. When successfully connecting with the phone using another computer, it behaves exactly the same, so I guess that the phone isn't the problem. I don't know if I configured the Dial-Up correctly. I use the phone number *99# which is very common on most mobile ISPs. I use the APN which my ISP is telling me to use. (I can't find the number on their support page, so I just use the default value *99#.) My mobile ISP is o2 Germany. There are How-Tos out there which use the Network Manager Applet to setup a bluetooth dial-up connection, but I can't see any bluetooth devices in the context menu as on the screenshots in those How-Tos. Do you have any suggestions what might be wrong / what I should try? EDIT: When choosing "Network Access Point" in the device's context menu instead of Serial Ports - Dial-Up Networking, an interface bnep0 appears. However, neither an IPv4 address is assigned for that interface (but IPv6), nor the phone connects to the internet. Am I missing something? Can I connect to the internet after setting up this network connection?

    Read the article

  • Hard Disk DRDY error: is it a crash

    - by pranjal
    I am using IBM Thinkpad, 1.7GHz, 512 RAM with Linux Mint 9 installed. I have two partitions in addition to root. One of the partitions became read-only yesterday, after which I rebooted my system. It is extremely slow along with DRDY Error : Is my Hard disk crashed ? Error Log while booting. Differences between boot sector and its backup. failed command : READ DMA BMDMA : stat 0X25 ata 1.00 : status : { DRDY ERR } ata 1.00 : status :{ UNC } Buffer I/O error on logical device, logical block 65467 smartctl output for the partition: mint mint # smartctl -a /dev/sda1 smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Device Model: TOSHIBA MK4026GAX RoHS Serial Number: X5LY1623T Firmware Version: PA107E User Capacity: 40,007,761,920 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 6 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Thu Feb 17 06:48:25 2011 UTC SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 153) seconds. Offline data collection capabilities: (0x1b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 30) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0 2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0 3 Spin_Up_Time 0x0027 100 100 001 Pre-fail Always - 310 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 3968 5 Reallocated_Sector_Ct 0x0033 100 100 050 Pre-fail Always - 40 7 Seek_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0 8 Seek_Time_Performance 0x0005 100 100 050 Pre-fail Offline - 0 9 Power_On_Hours 0x0032 082 082 000 Old_age Always - 7257 10 Spin_Retry_Count 0x0033 179 100 030 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 3484 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 489 193 Load_Cycle_Count 0x0032 064 064 000 Old_age Always - 367150 194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 36 (Lifetime Min/Max 14/57) 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 33 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 82 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 1 199 UDMA_CRC_Error_Count 0x0032 200 253 000 Old_age Always - 0 220 Disk_Shift 0x0002 100 100 000 Old_age Always - 101 222 Loaded_Hours 0x0032 085 085 000 Old_age Always - 6146 223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 0 224 Load_Friction 0x0022 100 100 000 Old_age Always - 0 226 Load-in_Time 0x0026 100 100 000 Old_age Always - 227 240 Head_Flying_Hours 0x0001 100 100 001 Pre-fail Offline - 0 SMART Error Log Version: 1 ATA Error Count: 2371 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 2371 occurred at disk power-on lifetime: 7256 hours (302 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 05 1a 1b 00 e0 Error: UNC 5 sectors at LBA = 0x00001b1a = 6938 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 05 1a 1b 00 e0 00 00:03:10.061 READ DMA f8 00 00 00 00 00 e0 00 00:03:10.061 READ NATIVE MAX ADDRESS ec 00 00 00 00 00 a0 02 00:03:10.053 IDENTIFY DEVICE ef 03 45 00 00 00 a0 02 00:03:10.053 SET FEATURES [Set transfer mode] f8 00 00 00 00 00 e0 00 00:03:10.053 READ NATIVE MAX ADDRESS Error 2370 occurred at disk power-on lifetime: 7256 hours (302 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 05 1a 1b 00 e0 Error: UNC 5 sectors at LBA = 0x00001b1a = 6938 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 05 1a 1b 00 e0 00 00:03:03.328 READ DMA f8 00 00 00 00 00 e0 00 00:03:03.327 READ NATIVE MAX ADDRESS ec 00 00 00 00 00 a0 02 00:03:03.320 IDENTIFY DEVICE ef 03 45 00 00 00 a0 02 00:03:03.319 SET FEATURES [Set transfer mode] f8 00 00 00 00 00 e0 00 00:03:03.319 READ NATIVE MAX ADDRESS Error 2369 occurred at disk power-on lifetime: 7256 hours (302 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 05 1a 1b 00 e0 Error: UNC 5 sectors at LBA = 0x00001b1a = 6938 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 05 1a 1b 00 e0 00 00:02:56.582 READ DMA f8 00 00 00 00 00 e0 00 00:02:56.582 READ NATIVE MAX ADDRESS ec 00 00 00 00 00 a0 02 00:02:56.574 IDENTIFY DEVICE ef 03 45 00 00 00 a0 02 00:02:56.574 SET FEATURES [Set transfer mode] f8 00 00 00 00 00 e0 00 00:02:56.574 READ NATIVE MAX ADDRESS Error 2368 occurred at disk power-on lifetime: 7256 hours (302 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 05 1a 1b 00 e0 Error: UNC 5 sectors at LBA = 0x00001b1a = 6938 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 05 1a 1b 00 e0 00 00:02:49.809 READ DMA f8 00 00 00 00 00 e0 00 00:02:49.809 READ NATIVE MAX ADDRESS ec 00 00 00 00 00 a0 02 00:02:49.801 IDENTIFY DEVICE ef 03 45 00 00 00 a0 02 00:02:49.801 SET FEATURES [Set transfer mode] f8 00 00 00 00 00 e0 00 00:02:49.801 READ NATIVE MAX ADDRESS Error 2367 occurred at disk power-on lifetime: 7256 hours (302 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 05 1a 1b 00 e0 Error: UNC 5 sectors at LBA = 0x00001b1a = 6938 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 05 1a 1b 00 e0 00 00:02:43.056 READ DMA f8 00 00 00 00 00 e0 00 00:02:43.056 READ NATIVE MAX ADDRESS ec 00 00 00 00 00 a0 02 00:02:43.048 IDENTIFY DEVICE ef 03 45 00 00 00 a0 02 00:02:43.048 SET FEATURES [Set transfer mode] f8 00 00 00 00 00 e0 00 00:02:43.047 READ NATIVE MAX ADDRESS SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] Device does not support Selective Self Tests/Logging Do I need to get a new Hard Disk my PC ?

    Read the article

  • Emtel Knowledge Series - Q2/2014

    From Cyber Island to Smart Mauritius Cyber Island? Smart Mauritius? - What is Emtel talking about? "With the majority of the population living in urban environments today, the concept of "Smart Cities" has become an urgent necessity. "Smart Cities" refer to an urban transformation which, by using latest ICT technologies makes cities more efficient. Many Governments are setting out ambitious plans to build the cities of the future based on massive connectivity, high bandwidth communications, intelligent sensors and analysis of huge volumes of data. Various researches have shown four key enablers for smart city success - Government leadership, suitable technology infrastructure, solid public-private partnerships and engaged citizens. It is around these enabling factors that telecoms companies can play a vital role in assisting governments to deliver on the smart city vision." The Emtel Knowledge Series goes in compliance with Emtel's 25th anniversary celebrations throughout the year and the master of ceremony, Kim Andersen, mentioned that there will be more upcoming events on a quarterly base. As a representative of the Mauritius Software Craftsmanship Community (MSCC) there was absolutely no hesitation to join in again. Following my visit to the first Emtel Knowledge Series workshop back in February this year, it was great to have another opportunity to meet and exchange with technology experts. But quite frankly what is it with those buzz words... As far as I remember and how it was mentioned "Cyber Island" is an old initiative from around 2005/2006 which has been refreshed in 2010. It implies the empowerment of Information & Communication Technologies (ICT) as an essential factor of growth by the government here in Mauritius. Actually, the first promotional period of Cyber Island brought me here but that's another story. The venue and its own problems Like last time the event was organised and held at the Conference Hall at Cyber Tower I in Ebene. As I've been working there for some years, I know about the frustrating situation of finding a proper parking. So, does Smart Island include better solutions for the search of parking spaces? Maybe, let's see whether I will be able to answer that question at the end of the article. Anyway, after circling around the tower almost two times, I finally got a decent space to put the car, without risking to get a ticket or damage actually. International speakers and their experience Once again, Emtel did a great job to get international expertise onto the stage to share their experience and vision on this kind of embarkment. Personally, I really appreciated the fact they were speakers of global reach and could provide own-experience knowledge. Johan Gott spoke about the fundamental change that the Swedish government ignited in order to move their society and workers' environment away from heavy industry towards a knowledge-based approach. Additionally, we spoke about the effort and transformation of New York City into a greener and more efficient Smart City. Given modern technology he also advised that any kind of available Big Data should be opened to the general public - this openness would provide a playground for anyone to garner new ideas and most probably solid solutions of which no one else thought about before. Emtel Knowledge Series on moving from Cyber Island to Smart Mauritus Later during the afternoon that exact statement regarding openness to and transparency of government-owned Big Data has been emphasised again by the Danish speaker Kim Andersen and his former colleague Mika Jantunen from Finland. Mika continued to underline the important role of the government to provide a solid foundation for a knowledge-based society and mentioned that Finnish citizens have a constitutional right to broadband connectivity. Next to free higher (tertiary) education Finland already produced a good number of innovations, among them are: First country to grant voting rights to women Free higher education Constitutional right to broadband connectivity Nokia Linux Angry Birds Sauna and others...  General access to internet via broadband and/or mobile connectivity is surely a key factor towards Smart Cities, or better said Smart Mauritius given the area dimensions and size of population. CTO Paul Valette gave the audience a brief overview of the essential role that Emtel will have to move Mauritius forward towards a knowledge-based and innovation-driven environment for its citizen. What I have seen looks really promising and with recently published information that Mauritians have 127% of mobile capacity - meaning more than 1 mobile, smartphone or tablet per person - it will be crucial to have the right infrastructure for these connected devices. How would it be possible to achieve a knowledge-based society? YouTube to the rescue!Seriously, gaining more knowledge will require to have fast access to educational course material as explained by Dr Kaviraj Sukon, General Director of the Open University of Mauritius. According to him a good number of high-profile universities in the world have opened their course libraries to the general public, among them EDX, Coursera and Open University. Nowadays, you're actually able and enabled to learn for and earn a BSc or even MSc certification on your own pace - no need to attend classed on campus. It was really impressive to see the number of available hours - more than enough for a life-long learning experience! {loadposition content_adsense} Networking in the name of MSCC As briefly mentioned above I was about to combine two approaches for this workshop. Of course, getting latest information and updates on Emtel services available, especially for my business here on the west coast of the island, but also to meet and greet new people for the MSCC. And I think it was very positive on both sides. Let me quickly describe some of the key aspects that happened during the day: Met with Arnaud Meslier and Kellie, both Microsoft to swap latest information on IT events. Hereby, I got an invite to Microsoft Windows Phone 8.1 Dev Camp. Got in touch with Arvin Lockee, Emtel to check our options to meet with the data team, and seizing the opportunity to have a visiting tour at the Emtel Data Centre. Had a great chat with Avinash Meetoo, Knowledge 7, Kim Andersen and Mika Jantunen about the situation of teaching and learning in general and specifically in the private sector here in Mauritius. Additionally, a number of various other interesting chats... Once again, I'm catching up on a couple of business cards in order to provide more background information about the MSCC, and to create a better awareness of MSCC within the local IT businesses. There is more to come soon!  Resume of the day The number of attendees during this event has been doubled or even tripled this time. The whole organisation has been improved massively and the combination of presentation and summarizing panel discussions was better than during the previous workshop back in February. Overall, once again a well-organised workshop and I'm already looking forward to join the next workshop in Q3. Update End of July we finally managed to visit the Emtel Data Centre in Arsenal. It was an interesting opportunity for some of our MSCC members.

    Read the article

  • Phones, Nokia, Microsoft and More

    - by Bill Evjen
    The phone revolution that is under way at the moment is insanely interesting and continuously full of buzz about directions, failures, and promises. The movement started with Apple completely reinventing what a smart phone was all about and now we have the followers. Though – don’t dismiss the followers, they are usually the ones that come out with the leap frog products when most of the world is thinking about jumping on. Remember the often used analogy – the USA invented the TV – but it was Japan that took it to the next level and now all TVs are from somewhere else other than the USA. Really there are two camps for the phones – the Cool Kids and other kids that no one wants to hang out with anymore. When it comes to cool – for some reason, the phone is an important part of that factor. Everyone wants to show their phone and its configuration (apps installed, etc) to their friends as a sign of (1) “I have money” and (2) I have smarts/tastes/style/etc when it comes to my applications that are on my phone. For those that don’t know – the Cool Kids include: Apple – this is quite obvious as everything Apple produces is in the cool camp. Just having an Apple product on your person means you can dance. Google – this is one of the more interesting releases as they have created something called Android (which in it’s own right is a major brand in itself). Microsoft – you might be saying “Really, Microsoft is cool?”. I would argue that they are indeed cool as it is now associated with XBOX 360, Kinect, and Windows 7. Gone are the days of Bob and that silly paperclip. Well – that’s it. There is nobody else I would stick in that camp. The other kids that weren’t picked for that dodgeball team include: Nokia Motorola Palm Blackberry and many many more The sad part of all this is that no matter what this second camp does now, it won’t be able to get out of this bucket easily. They will always be associated as yesterday’s technology and that association will drive the sales of the phone purchasers of the world. For those in that group, the only possible way out is to get invited to the cool club by one of the cool club members in the hope that their coolness somehow rubs off. To me, this is the move that Nokia is making. They are at this point where they have realized that they don’t have the full scope of the required end to end solution to make this all work. They have the plants to build the phones and the reach of the retailers that sell what they have. What they are missing is the proper operating system for the new world of multi-touch form factor phones. Even the companies that come up with some sort of new operating system for this type of new device, they are still associated with the yesterday and lack the developer community behind them to be the real wave of adoption that this market needs. Think about that – this is a major different between Nokia/Blackberry when you compare it to the likes of Apple, Google, and Microsoft. These three powerhouses having a very large and strong development community that will eagerly take on new initiatives using the skillsets that they have already cultivated over the years of already working with the company. This then results in a plethora of applications that are then placed on an app store of some kind. The developer gets a cut and then Apple/Google/Microsoft then get their cut. It is definitely a win-win. None of the other phone companies and wannabies can provide the same results. What Microsoft was missing was the major phone manufactures coming on board to create and push forward with the phones that are required to start the wave. This is where Nokia can come in and help Microsoft. They have the ability to promote the Windows Phone operating system on a new wave of phones. This does mean that Nokia will sell phones, but they lose out on the application store that they might have been thinking about making some money on as well as controlling the end to end solution. What is interesting is in questioning to oneself if Microsoft will purchase Nokia. It really depends upon how they want to compete and with whom Microsoft views as the major competitor. For instance, they can purchase Nokia and have their own hardware company and distribution network for phones – thereby taking on a model that is quite similar to Apple. On the other hand, they could just leave it up to the phone hardware companies such as Nokia and others to build and promote phones in a model that is similar to Google. Both ways have pluses and minuses. If they own the phone manufacturer, they really can put some thought into the design and technical specifications of the phone that is really designed to exactly how they want it. Microsoft has shown that they have this ability – especially with the XBOX initiative they have done over the years. Think about how good and powerful they have moved forward with XBOX – and I am not talking about just copying what others are doing, but coming up with leapfrog products that are steps ahead of everyone else. Though, if they didn’t do it themselves, they could then leave it up to the phone manufacturers to drive each other to build better and better phones that run the Microsoft OS – competition drives better products. We have seen this with the Android line of phones that are out there on the market. I have read a lot about Nokia investors really upset about the new Microsoft relationship – but really, this is a great thing. I for one am a fan of this relationship (I am also a Nokia stock holder btw). This will mean better days for Nokia.

    Read the article

  • Why is cell phone software is still so primitive?

    - by Tomislav Nakic-Alfirevic
    I don't do mobile development, but it strikes me as odd that features like this aren't available by default on most phones: full text search: searches all address book contents, messages, anything else being a plus better call management: e.g. a rotating audio call log, meaning you always have the last N calls recorded for your listening pleasure later (your little girl just said her first "da-da" while you were on a business trip, you had a telephone job interview, you received complex instructions to do something etc.) bluetooth remote control (like e.g. anyRemote, but available by default on a bluetooth phone) no multitasking capabilities worth mentioning and in general no e.g. weekly software updates, making the phone much more usable (even if it had to be done over USB, rather than over the network). I'm sure I was dumbfounded by the lack or design of other features as well, but they don't come to mind right now. To clarify, I'm not talking about smartphones here: my plain, 2-year old phone has a CPU an order of magnitude faster than my first PC, about as much storage space and it's ridiculous how bad (slow, unwieldy) the software is and it's not one phone or one manufacturer. What keeps the (to me) obvious software functionality vacuum on a capable hardware platform from being filled up?

    Read the article

  • How to access device settings on a Sony Ericsson mobile phone?

    - by TheRHCP
    Edited on April 29th Hello everyone, I recently bought a Sony Ericsson mobile phone which embeds Symbian S60 and I would like to add a missing feature myself. In fact I cannot actually disable Internet connection in an easy way when roaming, which cost me a lot of money last time I moved away ... So I would like to develop a little application that would just replace the actual Internet configuration with a fake configuration to avoid auto-connections. So what I would like to know is how can I access programmatically to my phone settings? I believe that this is possible but I do not really have a clue where to start. I know that Sony Ericsson provides a SDK to run Java applications on its customised JVM but Symbian is also providing a SDK to develop applications for S60 devices in many languages. The real questions is which SDK will provide an API able to access phone settings. This is not well documented so I am asking this question with the hope that someone here already had experience with development for Sony Ericsson/Symbian devices. Thanks. EDIT: It seems that I was totally wrong concerning my phone. This not based on any Symbian OS at all. This is pure Sony Ericsson so the only solution would be to look if Sony Ericsson extended J2ME functionality in their own JVM. I am gonna investigate on this.

    Read the article

  • Android 2.1 How to get Phone Numbers of contacts.

    - by Brandon Delany
    Hi, I am new to Android and have been working on an app that needs to get all of the user's contact's phone numbers. Apparently the code I have does not work with the 2.1 SDK. So far here is the code I am using: String[] projection = new String[] { Phone.NUMBER }; Cursor c = managedQuery( Phone.CONTENT_URI, projection, null, null, null ); int colIndex = -1; try { colIndex = c.getColumnIndexOrThrow( Phone.NUMBER ); } catch( Exception e ) { print( e.getMessage() ); } print( "Column Index = " + colIndex ); //count is equal to 3 for( int i = 0; i < count; i++ ){ try { print( c.getString( 2 ) ); //the 2 used to be colIndex } catch ( Exception e ) { print( e.getMessage() ); } } It seems that no matter what I pass into c.getString() it keeps telling me that I passed in -1. But I even hardcoded the 2, and it says the same thing. Any help would be much appreciated.

    Read the article

  • Verizon HTC Eris - No sound on incoming phone call after 2.1 droid upgrade. Help!?

    - by Michael Rosario
    Has anyone had the following issue? I've had several issues as well: No sound when call connects, ringing or people talking. Apps would force close like weather. I did call HTC support and they had me go into Menu, Settings, Manage Applications and then clear the cache of the problem app. They also had me clear the cache once the browser was open and then do a soft reset (power off the phone and take the battery out for 15 seconds) This did fix some issues, but I am constantly turning my phone on and off to get sound back on call or to make the assigned ringtones work. There's no rhyme or reason as to why they stop working... Anyone else tried anything different??? Related problem statement... http://community.htc.com/na/htc-forums/android/f/32/p/2601/10344.aspx#10344 My wife and I are most concerned about the incoming call issue.

    Read the article

  • Why can't I connect to a wifi network with my laptop, when I can with my phone?

    - by Alex Sf.
    I can connect with my phone and use the browser as usual. On my laptop it won't connect when using windows 7 while in ubuntu it will connect, but with no internet. What is going on here and how can I get internet on my laptop ? [edit] It's a public wifi hotspot. I can connect with no issues at home. My network asapter is: Atheros AR5B97. And my phone is an iPhone 3G. The wizard's of no help since it asks me to check the router, which I can't since it's a public hostspot.

    Read the article

  • Can Kies provide a data connection so my phone can avoid mobile data usage?

    - by Highly Irregular
    I regularly connect my Samsung phone by USB cable to my PC to charge it up, and when I run the Samsung Kies app on the PC I can sync data too. Is it possible for my phone to use my PCs internet connection through the USB link to avoid data charges? I don't have a wifi connection available. It would make sense if Kies could provide this, or perhaps there's some other way I can achieve it without wifi, such as using Bluetooth. I have a Samsung GT-S7500, though this question should apply to many other models.

    Read the article

  • Embedded "Smart" character LCD driver. Is this a good idea?

    - by chris12892
    I have an embedded project that I am working on, and I am currently coding the character LCD driver. At the moment, the LCD driver only supports "dumb" writing. For example, let's say line 1 has some text on it, and I make a call to the function that writes to the line. The function will simply seek to the beginning of the line and write the text (plus enough whitespace to erase whatever was last written). This is well and good, but I get the feeling it is horribly inefficient sometimes, since some lines are simply: "Some-reading: some-Value" Rather than "brute force" replacing the entire line, I wanted to develop some code that would figure out the best way to update the information on the LCD. (just as background, it takes 2 bytes to seek to any char position. I can then begin writing the string) My idea was to first have a loop. This loop would compare the input to the last write, and in doing so, it would cover two things: A: Collect all the differences between the last write and the input. For every contiguous segment (be it same or different) add two bytes to the byte count. This is referenced in B to determine if we are wasting serial bandwidth. B: The loop would determine if this is really a smart thing to do. If we end up using more bytes to update the line than to "brute force" the line, then we should just return and let the brute force method take over. We should exit the smart write function as soon as this condition is met to avoid wasting time. The next part of the function would take all the differences, seek to the required char on the LCD, and write them. Thus, if we have a string like this already on the LCD: "Current Temp: 80F" and we want to update it to "Current Temp: 79F" The function will go through and see that it would take less bandwidth to simply seek to the "8" and write "79". The "7" will cover the "8" and the "9" will cover the "0". That way, we don't waste time writing out the entire string. Does this seem like a practical idea?

    Read the article

  • Is the last digit of a phone number random?

    - by sehugg
    I have a telephony app which has a prompt which requires user choice. I made the app select one of 10 different phone prompts based on the last digit of the caller's phone number. Then I measure whether the user responds to the prompt (accept) or decides to skip to the next step (reject). I thought this would work well enough as a random selection, but I think I may be wrong. What I'm finding is that the exact same prompt has a dramatically different response rate (25% vs 35%) for two different last digits. Now I'm curious why this is. Does anyone know how phone numbers are assigned and why the last digit would be significant?

    Read the article

  • Insert values into dataset

    - by sudha.s
    Am using vb.net.Having dataset contain column name as phone .it contain set of phone number. i want to add 0 to each phone number and store it in another dataset. my code -------- cmd = New OracleCommand("select substr(PHONE,-10)as PHONE from reports.renewal_contact_t where run_date=to_date('" + TextBox1.Text + "','mm/dd/yyyy') and EXP_DATE =to_date('" + TextBox2.Text + "','mm/dd/yyyy') and region not in('TNP')", cn) ada = New OracleDataAdapter(cmd) ada.Fill(ds, "reports.renewal_contact_t ") Dim ds1 As New DataSet ds1 = ds.Clone() For Each q In ds.Tables(0).Rows phone = z + q("PHONE").ToString For Each q1 In ds1.Tables(0).Rows q1("PHONE") = phone Next Next my problem is am not getting values in ds1.Please help me to correct it.

    Read the article

  • How to access device settings on a S60 symbian based mobile phone?

    - by TheRHCP
    Hello everyone, I recently bought a Sony Ericsson mobile phone which embeds Symbian S60 and I would like to add a missing feature myself. In fact I cannot actually disable Internet connection in an easy way when roaming, which cost me a lot of money last time I moved away ... So I would like to develop a little application that would just replace the actual Internet configuration with a fake configuration to avoid auto-connections. So what I would like to know is how can I access programmatically to my phone settings? I believe that this is possible but I do not really have a clue where to start. I know that Sony Ericsson provides a SDK to run Java applications on its customised JVM but Symbian is also providing a SDK to develop applications for S60 devices in many languages. The real questions is which SDK will provide an API able to access phone settings. This is not well documented so I am asking this question with the hope that someone here already had experience with development for Sony Ericsson/Symbian devices. Thanks.

    Read the article

  • Java homework help, Error <identifier> expected

    - by user2900126
    Help with java homework this is my assignment that I have, this assignment code I've tried. But when I try to compile it I keep getting errors which I cant seem to find soloutions too: Error says <identifier> expected for Line 67 public static void () Assignment brief To write a simple java classMobile that models a mobile phone. Details the information stored about each mobile phone will include • Its type e.g. “Sony ericsson x90” or “Samsung Galaxy S”; • Its screen size in inches; You may assume that this a whole number from the scale 3 to 5 inclusive. • Its memory card capacity in gigabytes You may assume that this a whole number • The name of its present service provider You may assume this is a single line of text. • The type of contract with service provider You may assume this is a single line of text. • Its camera resolution in megapixels; You should not assume that this a whole number; • The percentage of charge left on the phone e.g. a fully charged phone will have a charge of 100. You may assume that this a whole number • Whether the phone has GPS or not. Your class will have fields corresponding to these attributes . Start by opening BlueJ, creating a new project called myMobile which has a classMobile and set up the fields that you need, Next you will need to write a Constructor for the class. Assume that each phone is manufactured by creating an object and specifying its type, its screen size, its memory card capacity, its camera resolution and whether it has GPS or not. Therefore you will need a constructor that allows you to pass arguments to initialise these five attributes. Other fields should be set to appropriate default values. You may assume that a new phone comes fully charged. When the phone is sold to its owner, you will need to set the service provider and type of contract with that provider so you will need mutator methods • setProvider () - - to set service provider. • setContractType - - to set the type of contract These methods will be used when the phones provider is changed. You should also write a mutator method ChargeUp () which simulates fully charging the phone. To obtain information about your mobile object you should write • accessor methods corresponding to four of its fields: • getType () – which returns the type of mobile; • getProvider () – which returns the present service provider; • getContractType () – which returns its type of contract; • getCharge () – which returns its remaining charge. An accessor method to printDetails () to print, to the terminal window, a report about the phone e.g. This mobile phone is a sony Erricsson X90 with Service provider BigAl and type of contract PAYG. At present it has 30% of its battery charge remaining. Check that the new method works correctly by for example, • creating a Mobile object and setting its fields; • calling printDetails () and t=checking the report corresponds to the details you have just given the mobile; • changing the service provider and contract type by calling setprovider () and setContractType (); • calling printDetails () and checking the report now prints out the new details. Challenging excercises • write a mutator methodswitchedOnFor () =which simulates using the phone for a specified period. You may assume the phone loses 1% of its charge for each hour that it is switched on . • write an accessor method checkcharge () whichg checks the phone remaing charge. If this charge has a value less than 25%, then this method returns a string containg the message Be aware that you will soon need to re-charge your phone, otherwise it returns a string your phone charge is sufficient. • Write a method changeProvider () which simulates changing the provider (and presumably also the type of service contract). Finally you may add up to four additional fields, with appropriate methods, that might be required in a more detailed model. above is my assignment that I have, this assignment code I've tried. But when I try to oompile it I keep getting errors which I cant seem to find soloutions too: Error says <identifier> expected for Line 67 public static void () /** * to write a simple java class Mobile that models a mobile phone. * * @author (Lewis Burte-Clarke) * @version (14/10/13) */ public class Mobile { // type of phone private String phonetype; // size of screen in inches private int screensize; // menory card capacity private int memorycardcapacity; // name of present service provider private String serviceprovider; // type of contract with service provider private int typeofcontract; // camera resolution in megapixels private int cameraresolution; // the percentage of charge left on the phone private int checkcharge; // wether the phone has GPS or not private String GPS; // instance variables - replace the example below with your own private int x; // The constructor method public Mobile(String mobilephonetype, int mobilescreensize, int mobilememorycardcapacity,int mobilecameraresolution,String mobileGPS, String newserviceprovider) { this.phonetype = mobilephonetype; this.screensize = mobilescreensize; this.memorycardcapacity = mobilememorycardcapacity; this.cameraresolution = mobilecameraresolution; this.GPS = mobileGPS; // you do not use this ones during instantiation,you can remove them if you do not need or assign them some default values //this.serviceprovider = newserviceprovider; //this.typeofcontract = 12; //this.checkcharge = checkcharge; Mobile samsungPhone = new Mobile("Samsung", "1024", "2", "verizon", "8", "GPS"); 1024 = screensize; 2 = memorycardcapacity; 8 = resolution; GPS = gps; "verizon"=serviceprovider; //typeofcontract = 12; //checkcharge = checkcharge; } // A method to display the state of the object to the screen public void displayMobileDetails() { System.out.println("phonetype: " + phonetype); System.out.println("screensize: " + screensize); System.out.println("memorycardcapacity: " + memorycardcapacity); System.out.println("cameraresolution: " + cameraresolution); System.out.println("GPS: " + GPS); System.out.println("serviceprovider: " + serviceprovider); System.out.println("typeofcontract: " + typeofcontract); } /** * The mymobile class implements an application that * simply displays "new Mobile!" to the standard output. */ public class mymobile { public static void main(String[] args) { System.out.println("new Mobile!"); //Display the string. } } public static void buildPhones(){ Mobile Samsung = new Mobile("Samsung", "3.0", "4gb", "8mega pixels", "GPS"); Mobile Blackberry = new Mobile("Blackberry", "3.0", "4gb", "8mega pixels", "GPS"); Samsung.displayMobileDetails(); Blackberry.displayMobileDetails(); } public static void main(String[] args) { buildPhones(); } } any answers.replies and help would be greatly appreciated as I really lost!

    Read the article

< Previous Page | 61 62 63 64 65 66 67 68 69 70 71 72  | Next Page >