Search Results

Search found 2274 results on 91 pages for 'soloman smart'.

Page 65/91 | < Previous Page | 61 62 63 64 65 66 67 68 69 70 71 72  | Next Page >

  • What are the arguments against parsing the Cthulhu way?

    - by smarmy53
    I have been assigned the task of implementing a Domain Specific Language for a tool that may become quite important for the company. The language is simple but not trivial, it already allows nested loops, string concatenation, etc. and it is practically sure that other constructs will be added as the project advances. I know by experience that writing a lexer/parser by hand -unless the grammar is trivial- is a time consuming and error prone process. So I was left with two options: a parser generator à la yacc or a combinator library like Parsec. The former was good as well but I picked the latter for various reasons, and implemented the solution in a functional language. The result is pretty spectacular to my eyes, the code is very concise, elegant and readable/fluent. I concede it may look a bit weird if you never programmed in anything other than java/c#, but then this would be true of anything not written in java/c#. At some point however, I've been literally attacked by a co-worker. After a quick glance at my screen he declared that the code is uncomprehensible and that I should not reinvent parsing but just use a stack and String.Split like everybody does. He made a lot of noise, and I could not convince him, partially because I've been taken by surprise and had no clear explanation, partially because his opinion was immutable (no pun intended). I even offered to explain him the language, but to no avail. I'm positive the discussion is going to re-surface in front of management, so I'm preparing some solid arguments. These are the first few reasons that come to my mind to avoid a String.Split-based solution: you need lot of ifs to handle special cases and things quickly spiral out of control lots of hardcoded array indexes makes maintenance painful extremely difficult to handle things like a function call as a method argument (ex. add( (add a, b), c) very difficult to provide meaningful error messages in case of syntax errors (very likely to happen) I'm all for simplicity, clarity and avoiding unnecessary smart-cryptic stuff, but I also believe it's a mistake to dumb down every part of the codebase so that even a burger flipper can understand it. It's the same argument I hear for not using interfaces, not adopting separation of concerns, copying-pasting code around, etc. A minimum of technical competence and willingness to learn is required to work on a software project after all. (I won't use this argument as it will probably sound offensive, and starting a war is not going to help anybody) What are your favorite arguments against parsing the Cthulhu way?* *of course if you can convince me he's right I'll be perfectly happy as well

    Read the article

  • Commerce, Anyway You Want It

    - by David Dorf
    I believe our industry is finally starting to realize the importance of letting consumers determine how, when, and where to interact with retailers.  Over the last few months I've seen several articles discussing the importance of removing the barriers between existing channels. Paula Rosenblum of RSR first brought the term omni-channel to my attention back in September. She stated, "omni-channel retail isn’t the merging of channels – rather, it’s the use of all possible channels (present and future) to enhance the customer experience in a profitable way." I added to her thoughts in this blog posting in which I said, "For retailers to provide an omni-channel experience, there needs to be one logical representation of products, prices, promotions, and customers across all channels. The only thing that varies is the presentation of the content based on the delivery mechanism (e.g. shelf labels, mobile phone, web site, print, etc.) and often these mechanisms can be combined in various ways." More recently Brian Walker of Gartner suggested we stop using the term multi-channel and begin thinking more about consumer touch-points. "It is time for organizations to leave their channel-oriented ways behind, and enter the era of agile commerce--optimizing their people, processes and technology to serve today's empowered, ever-connected customers across this rapidly evolving set of customer touch points." Now Jason Goldberg, better known as RetailGeek, says we should start breaking down the channel silos by re-casting the VP of E-Commerce as the VP of Digital Marketing, and change his/her focus to driving sales across all channels using digital media. This logic is based on the fact that consumers switch between channels, or touch-points as Brian prefers, as part of their larger buying process. Today's smart consumer leverages the Web, mobile, and stores to provide the best shopping experience, so retailers need to make this easier. Regardless of what we call it, the key take-away is that "multi-channel" is not only an antiquated term but also an idea who's time has passed.  Today, retailers must look at e-commerce, m-commerce, f-commerce, catalogs, and traditional store sales collectively and through the consumers' eyes.  The goal is not to drive sales through each channel but rather to just drive sales -- using whatever method the customer prefers.  There really should be just one cart.

    Read the article

  • EPM Planning (Hyperion) V11.1.2 Implementation Hands-On Boot-camp

    - by Mike.Hallett(at)Oracle-BI&EPM
    5-Day Training for Partners: 29th October - 2nd November 2012, London (UK): REGISTER Here This FREE for Partners 5-day workshop is designed to provide implementation instruction on Oracle Hyperion EPM Planning.  This boot-camp is intended for prospective implementers of the Planning and Budgeting functionality of Oracle EPM or implementers that are currently familiar with the basics of EPM Planning and looking to strengthen their base of knowledge in the product. The class begins with an overview of Essbase, the foundation of Hyperion Planning. It provides a general overview of Planning and Planning terms, the architecture of all the Planning components, and how they are commonly used. The course goes over all the steps to create an application from scratch. This involves some preparation work outside of Planning and leads to developing the application in both the Planning Windows and Web clients. Participants will modify existing dimensions and build out the hierarchies using the Web client. Topics Covered The boot-camp shows developers how to build out dimensions using Classic Planning and by using EPMA. It covers the mechanics and cover strategies for automating the build process such as interface tables. It reviews data loads using Load Rules to load the Planning database. The course focuses on tasks that end-users must perform during the planning cycle. It walks students through creating and modifying forms, working with forms to enter data, adding annotations, and the rest of the form features such as running business rules and managing task lists. It covers how to use the forms in the Smart View client and finishes up the end-user perspective by going through Workflow Management and the process of submitting a plan for review. The final section of the course covers Security and other administration topics such as automation and deployment. Prerequisites Ideal participants are Oracle partners (SIs and resellers) with a background in business information systems and a clientele of customers with ongoing or prospective EPM initiatives. Alternatively, partners with the background described above and an interest in evolving their practice to a similar profile are suitable participants. Further online OPN guided learning path information and webinars are available at: Oracle Hyperion Planning 11 Essentials. Please note that attendees are required to bring a laptop. View here laptop requirements and detailed agenda. ·       REGISTER Here : acceptance is subject to availability and your place will be confirmed within two weeks  ( and for help see the Partner Registration Guide ). Training Location: Oracle Corporation UK Ltd Columbus Room Customer Visit Center 1 South Place London EC2M 2RB Training Dates: 29th October - 2nd November  9:30 am – 5:00 pm BST For more information please contact [email protected].

    Read the article

  • Oracle Service Cloud May 2014 Release – Focus on your driving by JP Saunders

    - by Tuula Fai
    The next time you’re twiddling dials on your car’s dashboard to get the air to blow in the right direction, and the right song to play on the stereo, while pulling on the wires to charge your phone and punching in passwords to re-sync your hands-free headset to take a call, consider this… Does having a better dashboard UI in your car improve your driving performance? The Tesla car has one of the most modern and intuitive dashboards in any commercial car today. It is actually based on the design of a smart phone, which can download apps and updates directly from the cloud.  The 17” touchscreen, Lynx-based dashboard totally integrates all channels and devices, allowing the driver to focus on the smooth driving and power of this luxury (toy) car.  What the folks at Tesla didn't do was avoid the complexity of our needs. Instead, they streamlined them. And, while we might not all be able to afford a Tesla, their approach demonstrates that a modern UI approach can ultimately make a positive difference in our lives and businesses.  This is why the productivity and effectiveness of a Modern Contact Center is many times greater than that of a traditional contact center. Agents in a Modern Contact Center get to focus on the task at hand, the customer engagement, rather than stumbling their way through Lego blocks of complexity.  The Oracle Service Cloud is a modern approach to customer service that empowers your agents to achieve greater focus on improving your operational and strategic success through streamlined business processes.  Here are some of the recent May 2014 release highlights to the Oracle Service Cloud: Performance Enhanced Desktop UI A modern agent desktop interface that optimizes clumsy tasks, logins, screens and workflows and is optimized for agent and system performance. Improvements include performance for drag-and-drop configurable views, saved searches, and improved caching for high-speed performance even during disconnected or slow internet access.  Customer Experience Routing A streamlined automatic way to connect the right customer need to the best agent skills, based on multidimensional variables such as product skills, language skills, workload, call volume to optimize the connection and resolution experience. On-The-Go Mobile Improvements to the Agent mobile app that extend connectivity to websites, and customer surveys that are mobile-ready and rendered for any device, and ensure the customer’s voice is captured while the insight is still top of mind.  Infused Social Engagement Enhancements to infused social capabilities allow agents to respond in social threads directly from within the agent desktop, with the information becoming part of the incident record for automatic actions (such as replay or escalate) triggered off the response. Front-End Siebel Contact Center The market leading online Web Customer Self-Service interface from the Oracle Service Cloud, is now out-of-the-box ready for Oracle Siebel customers. Deploy a new online web self-service interface in a matter of weeks to have customers self-serve and self-solve answers, with escalated incidents routed directly into the Oracle Siebel Contact Center. For more information on the latest enhancements for the Oracle Service Cloud, please see the Oracle Service Cloud May 2014 Capabilities and Benefits. Related blogs: Oracle Service Cloud Feb 2014

    Read the article

  • Pro SharePoint 2010 Business Intelligence Solutions

    - by Sahil Malik
    Ad:: SharePoint 2007 Training in .NET 3.5 technologies (more information). Oh yeah baby, it’s out finally! This book is what I wanted to write for so long now, but never really got a chance to. For SharePoint 2007, I authored the SharePoint section of “Smart BI Solutions with SQL Server 2008” for MS Press. But never really got the time, to author a full book that this topic deserved. Until SharePoint 2010, we actually have a full book on this topic. So first things first, I didn’t actually write it. My role was limited to the overall concept, the outline, the layout, completion of it, code samples, identifying what we need in here, vouching for technical accuracy, identifying authors etc. The real work was done by Srini (5 chapters), and Steve (1 chapter). So credit given where it is due. But, with that said, this is a pretty good book. It has always been a challenge to find the superman that knows both, data ware housing concepts, and SharePoint concepts. The data ware housing concepts include basic stuff you need to know to work in the BI area such as cubes, MDX queries, etc. So chapter 1 covers that – and if you’re a hardcore DBA, feel free to skip Chapter 1. Then beyond that, we take every single SharePoint 2010 BI topic, and slice and dice it in detail. The topics we deal with are - Visio Services Reporting services Business Connectivity Services Excel Services PerformancePoint Services And in covering each of these topics, we ensure that a general layout was followed for each topic, to ensure completeness of content. We make sure we cover Setup related issues and advice Point and click usage Code usage, i.e. extensibility using visual studio and a walkthrough of the administration side of things, including powershell. (Yes, I insisted on that in being there in every chapter). Writing a book is always a lot of work, so we hope you find it useful. And it should go very well with the other book I just reviewed, which is Microsoft ADO.NET 4, step by step. Comment on the article ....

    Read the article

  • SharePoint 2010 Hosting :: How to Enable Office Web Apps on SharePoint 2010

    - by mbridge
    Office Web App is the online version of Microsoft Office 2010 which is very helpful if you are going to use SharePoint 2010 in your organization as it allows you to do basic editing of word document without installing the Office Suite in the client machine. Prerequisites : - Microsoft Server 2008 R2 - Microsoft SharePoint Server 2010 or Microsoft SharePoint Foundation 2010 - Microsoft Office Web Apps. If you have installed all the above products, just follow this steps: 1. Go to Central Administration > Click on Manage Service Application. 2. All the menus are not displayed in ribbon Menu format which was first introduced in Office 2007. Click on New > Word Viewing Services ( You can choose PowerPoint or Excel also, steps are same ). This will open a pop window. Adding Services for Office Web Apps 3. Give a Proper Name which can have your companies or project name. 4. Under Application Pool select : SharePoint Web Services Default. 5. Next keep the check box checked which says : Add this service application’s proxy to the farm’s default proxy list. Click Ok Adding Word Viewer as Service Application Office Web Apps as Services in Sharepoint 2010 6. This will install all the Office Web App services required. You can see the name as you gave in the above step. How to Activate Office Web Apps in Site Collection? 1. Go to the site for which you want to activate this feature. 2. Click on Site Action > Site Settings > Site Collection Administrator > Site Collection Features 3. Activate Office Web Apps. Activate Office Web Apps Feature in Site Collection How to make sure Office Web Apps is working for your site collection? 1. Locate any office document you have and click on the smart menu which appears when you hover your mouse on it. Dont double-click as this will launch the document in Office Client if its installed. This feature can be changed. 2. If you see View or Edit in Browser as menu item, your Office Web Apps is configured correctly. View Edit Office Document in Browser Editing Office Document in Browser Another post related SharePoint 2010: 1. How to Configure SharePoint Foundation 2010 for SharePoint Workspace 2010 2. Integrating SharePoint 2010 and SQL 2008 R2

    Read the article

  • RPG Monster-Area, Spawn, Loot table Design

    - by daemonfire300
    I currently struggle with creating the database structure for my RPG. I got so far: tables: area (id) monster (id, area.id, monster.id, hp, attack, defense, name) item (id, some other values) loot (id = monster.id, item = item.id, chance) spawn (id = area.id, monster = monster.id, count) It is a browser-based game like e.g. Castle Age. The player can move from area to area. If a player enters an area the system spawns, based on the area.id and using the spawn table data, new monsters into the monster table. If a player kills a monster, the system picks the monster.id looks up the items via the the loot table and adds those items to the player's inventory. First, is this smart? Second, I need some kind of "monster_instance"-table and "area_instance"-table, since each player enters his very own "area" and does damage to his very own "monsters". Another approach would be adding the / a player.id to the monster table, so each monster spawned, has it's own "player", but I still need to assign them to an area, and I think this would overload the monster table if I put in the player.id and the area.id into the monster table. What are your thoughts? Temporary Solution monster (id, attackDamage, defense, hp, exp, etc.) monster_instance (id, player.id, area_instance.id, hp, attackDamage, defense, monster.id, etc.) area (id, name, area.id access, restriction) area_instance (id, area.id, last_visited) spawn (id, area.id, monster.id) loot (id, monster.id, chance, amount, ?area.id?) An example system-flow would be: Player enters area 1: system creates area_instance of type area.id = 1 and sets player.location to area.id = 1 If Player wants to battle monsters in the current area: system fetches all spawn entries matching area.id == player.location and creates a new monster_instance for each spawn by fetching the according monster-base data from table monster. If a monster is fetched more than once it may be cached. If Player actually attacks a monster: system updates the according monster_instance, if monster dies the instance if removed after creating the loot If Player leaves the area: area_instance.last_visited is set to NOW(), if player doesn't return to data area within a certain amount of time area_instance including all its monster_instances are deleted.

    Read the article

  • Dealing with coworkers when developing, need advice [closed]

    - by Yippie-Kai-Yay
    I developed our current project architecture and started developing it on my own (reaching something like, revision 40). We're developing a simple subway routing framework and my design seemed to be done extremely well - several main models, corresponding views, main logic and data structures were modeled "as they should be" and fully separated from rendering, algorithmic part was also implemented apart from the main models and had a minor number of intersection points. I would call that design scalable, customizable, easy-to-implement, interacting mostly based on the "black box interaction" and, well, very nice. Now, what was done: I started some implementations of the corresponding interfaces, ported some convenient libraries and wrote implementation stubs for some application parts. I had the document describing coding style and examples of that coding style usage (my own written code). I forced the usage of more or less modern C++ development techniques, including no-delete code (wrapped via smart pointers) and etc. I documented the purpose of concrete interface implementations and how they should be used. Unit tests (mostly, integration tests, because there wasn't a lot of "actual" code) and a set of mocks for all the core abstractions. I was absent for 12 days. What do we have now (the project was developed by 4 other members of the team): 3 different coding styles all over the project (I guess, two of them agreed to use the same style :), same applies to the naming of our abstractions (e.g CommonPathData.h, SubwaySchemeStructures.h), which are basically headers declaring some data structures. Absolute lack of documentation for the recently implemented parts. What I could recently call a single-purpose-abstraction now handles at least 2 different types of events, has tight coupling with other parts and so on. Half of the used interfaces now contain member variables (sic!). Raw pointer usage almost everywhere. Unit tests disabled, because "(Rev.57) They are unnecessary for this project". ... (that's probably not everything). Commit history shows that my design was interpreted as an overkill and people started combining it with personal bicycles and reimplemented wheels and then had problems integrating code chunks. Now - the project still does only a small amount of what it has to do, we have severe integration problems, I assume some memory leaks. Is there anything possible to do in this case? I do realize that all my efforts didn't have any benefit, but the deadline is pretty soon and we have to do something. Did someone have a similar situation? Basically I thought that a good (well, I did everything that I could) start for the project would probably lead to something nice, however, I understand that I'm wrong. Any advice would be appreciated, sorry for my bad english.

    Read the article

  • SharePoint Thoughts

    - by Tim Murphy
    I was listening to .NET Rocks episode #713 and it got me thinking about a number of SharePoint related topics. I have been working with SharePoint since the 2001 product came out and have watched it evolve over the years.  Today SharePoint is one of the most powerful and flexible products in the market.  Of course that doesn’t mean there isn’t room for improvement (a lot of improvement in fact) and with much power comes much responsibility. My main gripe these days is that you have to develop on a server instance.  This adds a real barrier to entry for developers.  You either have to run VMWare or Hyper-V on your developer machine or actually develop on your dev server for most tasks.  Yes, there is a way to setup a Windows 7 machine with the SharePoint components but it is very hackish. Beyond that the tools in VS2010 are a great leap forward from past generations.  Not requiring a separate package creation tool is not the least of the improvements.  Better workflow and web part development have also eased the burden of many developers. The other thing the show brought up in my thoughts was more around usage.  Users want to be able to self server everything without regard to what affect that has on leveraging their data from a corporate perspective.  My coworkers who work on Lotus Notes ask why the user can’t just do what ever they want? Part of the reason is that those features have not been built, but the other part is that giving them those features is often like giving an infant a loaded hand gun.  You can do it but it doesn’t make it the smart thing to do. As with any tool that is going to be used in the enterprise it should be subject to governance.  If controls are not in place as they said in the episode of DNR the document libraries and I believe SharePoint in general starts to look as disarrayed and unusable as a shared drive.  Consider these factors before giving into every whim of the users.  You should be able to explain to them the tradeoffs of giving them full control versus being able to leverage the information they collect to the benefit of the organization. These are just a couple of the thoughts that were triggered by the show.  I’m sure there are more discussions that can be had.  Feel free to leave your comments about the pros and cons of SharePoint. del.icio.us Tags: .NET Rocks,SharePoint,software development

    Read the article

  • Webcast

    - by bwalstra
    v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif";} Invites You To: Monetizing Digital Media From Clicks To Cash Digital goods and services are booming, and smart businesses are transforming the way they sell and deliver their offerings in the exploding digital marketplace. Using information-services, credit-card, and digital-media examples Oracle’s Mustafa Oyumi and Tripp Partain will show the Oracle Digital Media solution - from clicks to cash: · Design, Model, and Launch New Products · Review Real Time Market Effectiveness and Respond · Rate, Bill, Invoice, Revenue Rec, and Collect · Determine Rights, Royalties, Licensing, and Commissions · Analyze Enterprise Results Friday, July 6, 2012 11:00 a.m. – 11:45 a.m. <Webcast Details> <Webcast Details> Agenda 11:00 a.m. Overview 11:10 a.m. Demo 11:30 a.m. Q&A Copyright © 2012, Oracle. All rights reserved. Contact Us | Legal Notices and Terms of Use | Privacy Statement 36526 Oracle Corporation - Worldwide Headquarters, 500 Oracle Parkway, OPL - E-mail Services, Redwood Shores, CA 94065, United States Create or update your profile to receive customized e-mail about Oracle products and services. If you do not wish to receive any further electronic marketing communications from Oracle you can Opt-Out completely, please note you will no longer receive newsletters and product information you may have subscribed to.

    Read the article

  • My co-worker has not been doing such a good job for the past decade. What do I do? [closed]

    - by stijn
    Possible Duplicate: How do I approach a coworker about his or her code quality? I started working with him almost a decade ago and back then I had never really programmed before, being a young hardware engineer. Right now however I have made quite some progress in all areas being part of software design and i am much, much more skilled than my co-worker who is 15 years older and has been programming more than twice as long. He is super nice and definitely smart enough, but lately his lack of skill and performance are starting to drag me down because we're more and more working on the same codebase. And soon we are going to do a quite ambitious start from scratch creating a whole new hard/software system. I feel it is time to address all issues now, but i do not know how to start. Here are some of the things that I would like to see him improve on: no consistent usage of style, spaces nor tabs (eg if(something ) a =b ) adds newlines around pieces of code to make it easier to read, then commits those with messages like 'no changes made' overall commit messages are useless and so are most of the comments, if there are any (eg 'remove solves for bug Rik' if Rik reported a bug). There is no function/class documentation. lots of spelling errors, in both English and native language, which sometimes are mixed 6/7/8 level deep deep nesting is no exception, a lot of functions start with one level already like if(ptr!=Null){ even when ptr is the result of allocation via new in the constructor numerous source files have over 10k lines of those lines, a major part is simply a result of copy-pasting functionality instead of using a function. This includes copying comments so we end up with 50 occurrences of var=NULL; //TODO TEST this!!!!!!! another part is hundreds of lines of dead code knows what versioning does, yet comments out old code and places new code underneath it when making changes coding skills are below par, especially for the type of rather high precision applications we do. Yet somehow, after a lot of trying and testing, stuff starts to work. But then breaks again some time later because every change casues a waterfall effect. violates every single item in the C++ FAQ lite, practices every bad practice I can think of still doesn't know how to properly use the debugger, but spends hours inspecting messy logfiles in notepad on a tiny laptop screen. Does not make any adjustments to the settings of the software he uses. Never uses keyboard shortcuts. does not seem to progress or learn new things at all. Work rather slow, mostly due to the lack of planning and incorrect usage of tools. How does one deal with this? For starters, how do I make him aware of all these problems? Should I tell the staff about it? And the next step, how to get him to learn new things and adopt another way of working?

    Read the article

  • BI&EPM in Focus November 2013

    - by Mike.Hallett(at)Oracle-BI&EPM
    Normal 0 false false false EN-GB X-NONE X-NONE IBM is Embracing Oracle Exalytics: The Velocity of Thought and Action (link) Customers Ambulance Victoria, Australia, uses analytics and modelling to serve the expanding needs of a growing population (link) Cablemás Selects Oracle to Speed Customer Data Insights (link) National Instruments Introduces New Business Intelligence Solutions—Runs Reports up to 30x Faster, and Expands Customer Insight (link) FLSmidth Ensures Precise, Transparent Financial Reporting at All Business Levels, Reduces Financial Consolidation Time by up to 40% (link) Enterprise Performance Management Partner Edgewater Ranzal Webinar Series Mitigate Your Biggest EPM Project Risk - Thursday, 21st November - Register here:  4.00 GMT Capital Planning in the Energy Industry - Tuesday, 26th November - Register here:  4.00 GMT Driving Value in the Retail Industry Using Hyperion Strategic Finance (HSF)  - Tuesday, 10th December - Register here:  7.00 GMT Dec 11, Look Smarter Selling Hyperion Profitability & Cost Management (HPCM) Webcast (link) EPM System Infrastructure Tips & Tricks Support: November EPM Patch Set Updates released Business Analytics Monthly Index - October 2013 Hyperion Smart View Assistance with OBIEE 11.1.1.7 Hyperion Disclosure Management 11.1.2.3.330 PSU 17444967 [Doc ID 1592645.1] Hyperion Financial Close Management (FCM) 11.1.2.3.100 PSU 16989110 [Doc ID 1592644.1] Business  Intelligence BI-Apps Whitepaper: Packaged Analytic Applications: Accelerating Time and Value By Wayne Eckerson (link) BI Apps Blog: A Closer Look at Oracle Price Analytics (link) Blog: Taking Your Business Scorecard Golfing (link) Blog: Practical Uses of Business Scorecards, from Company-Wide to Process Specific (link) Nov 19, Big Data at Work Series: How Delphi Harnesses Big Data to Improve Warranty Response & Customer Satisfaction (link) Rittman Mead Blog: Oracle BI Apps 11.1.1.7.1 – GoldenGate Integration Support: OBIEE Suite Bundle Patches (understand OBIEE naming convention) [Doc ID 1591422.1] Support Blog: Java update alert: Essbase Administration Services (EAS) 11.1.2.3 (link) Support Blog: OBIEE 11.1.1.7.131017 now available (link) /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi; mso-fareast-language:EN-US;}

    Read the article

  • Help with Strategy-game AI

    - by f20k
    Hi, I am developing a strategy-game AI (think: Final Fantasy Tactics), and I am having trouble coming up for the design of the AI. My main problem is determining which is the optimal thing for it to do. First let me describe the priority of what action I would like the AI to take: Kill nearest player unit Fulfill primary directive (kill all player units, kill target unit, survive for x turns) Heal ally unit / cast buffer Now the AI can do the following in its turn: Move - {Attack / Ability / Item} (either attack or ability or item) {Attack / Ability / Item} - Move Move closer (if targets not in range) {Attack / Ability / Item} (if move not available) Notes Abilities have various ranges / effects / costs / effects. Each ai unit has maybe 5-10 abilities to choose from. The AI will prioritize killing over safety unless its directive is to survive for x turns. It also doesn't care about ability cost much. While a player may want to save a big spell for later, the AI will most likely use it asap. Movement is on a (hex) grid num of player units: 3-6 num of ai units: 3-7 or more. Probably max 10. AI and player take turns controlling ONE unit, instead of all at the same time. Platform is Android (if program doesnt respond after some time, there will be a popup saying to Force Quit or Wait - which looks really bad!). Now comes the questions: The best ability to use would obviously be the one that hits the most targets for the most damage. But since each ability has different ranges, I won't know if they are in range without exploring each possible place I can move to. One solution would be to go through each possible places to move to, determine the optimal attack at that location - which gives me a list of optimal moves for each location. Then choose the optimal out of the list and execute it. But this will take a lot of CPU time. Is there a better solution? My current idea is to move as close as possible towards the closest, largest group of people, and determine the optimal attack/ability from there. I think this would be a lot less work for the CPU and still allow for wide-range attacks. Its sub-optimal but the AI will still seem 'smart'. Other notes/questions: Am I over-thinking/over-complicating it? Better solution? I am open to all sorts of suggestions I have taken a look at the spell-casting question, but it doesn't take into account the movement - so perhaps use that algo for each possible move location? The top answer mentioned it wasn't great for area-of-effect and group fights - so maybe requires more tweaking? Please, if you mention a graph/tree, let me know basically how to use it. E.g. Node means ability, level corresponds to damage, then search for the deepest node.

    Read the article

  • SOA Summit - Oracle Session Replay

    - by Bruce Tierney
    If you think you missed the most recent Integration Developer News (IDN) "SOA Summit" 2013...good news, you didn't.  At least not the replay of the Oracle session titled: Three Solutionsfor Simplifying Cloud/On-Premises Integration As you will see in the reply below, this session introduces Three common reasons for integration complexity: Disparate Toolkits Lack of API Management Rigid, Brittle Infrastructure and then the Three solutions to these challenges: Unify Cloud On-premises Integration Enable Multi-channel Development with API Management Plan for the Unexpected - Future Readiness The last solution on future readiness describes how you can transition from being reactive to new trends, such as the Internet of Things (IoT), by modifying your integration strategy to enable business agility and how to recognize trends through Fast Data event processing ahead of your competition. Oracle SOA Suite customer SFpark's (San Francisco Metropolitan Transit Authority) implementation with API Management is covered as shown in the screenshot to the right This case study covers the core areas of API Management for partners to build their own applications by leveraging parking availability and real-time pricing as well as mobile enablement of data integrated by SOA Suite underneath.  Download the free SFpark app from the Apple and Android app stores to check it out. When looking into the future, the discussion starts with a historical look to better prepare for what comes next.   As shown in the image below, one of the next frontiers after mobile and cloud integration is a deeper level of direct "enterprise to customer" interaction.  Much of this relates to the Internet of Things.  Examples of IoT from the perspective of SOA and integration is also covered in the session. For example, early adopter Turkcell and their tracking of mobile phone users as they move from point A to B to C is shown in the image the right.   As you look into more "smart services" such as Location-Based Services, how "future ready" is your application infrastructure?  . . . Check out the replay by clicking the video image below to learn about these three challenges and solution including how to "future ready" your application infrastructure:

    Read the article

  • How to interview a natural scientist for a dev position?

    - by Silas
    I already did some interviews for my company, mostly computer scientists for dev positions but also some testers and project managers. Now I have to fill a vacancy in our research group within the R&D department (side note: “research” means that we try to solve problems in our professional domain/market niche using software in research projects together with universities, other companies, research centres and end user organisations. It’s not computer science research; we’re not going to solve the P=NP problem). Now we invited a guy holding an MSc in chemistry (with a lot of physics in his CV, too), who never had any computer science lesson. I already talked with him about half an hour at a local university’s career days and there’s no doubt the guy is smart. Also his marks are excellent and he graduated with distinction. For his BSc he needed to teach himself programming in Mathematica and told me believably that he liked programming a lot. Also he solved some physical chemistry problem that I probably don’t understand using his own software, implemented in Mathematica, for his MSc thesis. It includes a GUI and a notable size of 8,000 LoC. He seems to be very attracted by what we’re doing in our research group and to be honest it’s quite difficult for an SME like us to get good people. I also am very interested in hiring him since he could assist me in writing project proposals, reports, doing presentations and so on. He would probably fit to our team, too. The only question left is: How can I check if he will get the programming skills he needs to do software implementation in our projects since this will be a significant part of the job? Of course I will ask him what it is, that is fascinating him about programming. I’ll also ask how he proceeded to write his natural science software and how he structured it. I’ll ask about how he managed to obtain the skills and information about software development he needed. But is there something more I could ask? Something more concrete perhaps? Should I ask him to explain his Mathematica solution? To be clear: I’m not looking for knowledge in a particular language or technology stack. We’re a .NET shop in product development but I want to have a free choice for our research projects. So I’m interested in the meta-competence being able to learn whatever is actually needed. I hope this question is answerable and not open-ended since I really like to know if there is a default way to check for the ability to get further programming skills on the job. If something is not clear to you please give me some comments and let me improve my question.

    Read the article

  • As the current draft stands, what is the most significant change the "National Strategy for Trusted Identities in Cyberspace" will provoke?

    - by mfg
    A current draft of the "National Strategy for Trusted Identities in Cyberspace" has been posted by the Department of Homeland Security. This question is not asking about privacy or constitutionality, but about how this act will impact developers' business models and development strategies. When the post was made I was reminded of Jeff's November blog post regarding an internet driver's license. Whether that is a perfect model or not, both approaches are attempting to handle a shared problem (of both developers and end users): How do we establish an online identity? The question I ask here is, with respect to the various burdens that would be imposed on developers and users, what are some of the major, foreseeable implementation issues that will arise from the current U.S. Government's proposed solution? For a quick primer on the setup, jump to page 12 for infrastructure components, here are two stand-outs: An Identity Provider (IDP) is responsible for the processes associated with enrolling a subject, and establishing and maintaining the digital identity associated with an individual or NPE. These processes include identity vetting and proofing, as well as revocation, suspension, and recovery of the digital identity. The IDP is responsible for issuing a credential, the information object or device used during a transaction to provide evidence of the subject’s identity; it may also provide linkage to authority, roles, rights, privileges, and other attributes. The credential can be stored on an identity medium, which is a device or object (physical or virtual) used for storing one or more credentials, claims, or attributes related to a subject. Identity media are widely available in many formats, such as smart cards, security chips embedded in PCs, cell phones, software based certificates, and USB devices. Selection of the appropriate credential is implementation specific and dependent on the risk tolerance of the participating entities. Here are the first considered actionable components of the draft: Action 1: Designate a Federal Agency to Lead the Public/Private Sector Efforts Associated with Achieving the Goals of the Strategy Action 2: Develop a Shared, Comprehensive Public/Private Sector Implementation Plan Action 3:Accelerate the Expansion of Federal Services, Pilots, and Policies that Align with the Identity Ecosystem Action 4:Work Among the Public/Private Sectors to Implement Enhanced Privacy Protections Action 5:Coordinate the Development and Refinement of Risk Models and Interoperability Standards Action 6: Address the Liability Concerns of Service Providers and Individuals Action 7: Perform Outreach and Awareness Across all Stakeholders Action 8: Continue Collaborating in International Efforts Action 9: Identify Other Means to Drive Adoption of the Identity Ecosystem across the Nation

    Read the article

  • My Doors - Why Standards Matter to Business

    - by [email protected]
    By Brian Dayton on April 8, 2010 9:27 PM "Standards save money." "Standards accelerate projects." "Standards make better solutions." What do these statements mean to you? You buy technology solutions like Oracle Applications but you're a business person--trying to close the quarter, get performance reviews processed, negotiate a new sourcing contract, etc. When "standards" come up in presentations and discussions do you: - Nod your head politely - Tune out and check your smart phone - Turn to your IT counterpart and say "Bob's all over this standards thing, right Bob?" Here's why standards matter. My wife wants new external doors downstairs, ones that would get more light into the rooms. Am I OK with that? "Uhh, sure...it's a little dark in the kitchen." - 24 hours ago - wife calls to tell me that she's going to the hardware store and may look at doors - 20 hours ago - wife pulls into driveway, informs me that two doors are in the back of her station wagon, ready for me to carry - 19 hours ago - I re-discovered the fact that it's not fun to carry a solid wood door by myself - 5 hours ago - Local handyman, who was at our house anyway, tells me that the doors we bought will likely cost 2-3x the material cost in installation time and labor...the doors are standard but our doorways aren't We could have done more research. I could be more handy. Sure. But the fact is, my 1951 house wasn't built with me in mind. They built what worked and called it a day. The same holds true with a lot of business applications. They were designed and architected for one-time use with one use-case in mind. Today's business climate is different. If you're going to use your processes and technology to differentiate your business you should have at least a working knowledge of: - How standards can benefit your business - Your IT organization's philosophy around standards - Your vendor's track-record around standards...and watch for those who pay lip-service to standards but don't follow through The rallying cry in most IT organizations today is "learn more about the business, drop the acronyms." I'm not advocating that you go out and learn how to code in Java. But I do believe it will help your business and your decision-making process if you meet IT ½...even ¼ of the way there. Epilogue: The door project has been put on hold and yours truly has to return the doors to the hardware store tomorrow.

    Read the article

  • Software Tuned to Humanity

    - by Phil Factor
    I learned a great deal from a cynical old programmer who once told me that the ideal length of time for a compiler to do its work was the same time it took to roll a cigarette. For development work, this is oh so true. After intently looking at the editing window for an hour or so, it was a relief to look up, stretch, focus the eyes on something else, and roll the possibly-metaphorical cigarette. This was software tuned to humanity. Likewise, a user’s perception of the “ideal” time that an application will take to move from frame to frame, to retrieve information, or to process their input has remained remarkably static for about thirty years, at around 200 ms. Anything else appears, and always has, to be either fast or slow. This could explain why commercial applications, unlike games, simulations and communications, aren’t noticeably faster now than they were when I started programming in the Seventies. Sure, they do a great deal more, but the SLAs that I negotiated in the 1980s for application performance are very similar to what they are nowadays. To prove to myself that this wasn’t just some rose-tinted misperception on my part, I cranked up a Z80-based Jonos CP/M machine (1985) in the roof-space. Within 20 seconds from cold, it had loaded Wordstar and I was ready to write. OK, I got it wrong: some things were faster 30 years ago. Sure, I’d now have had all sorts of animations, wizzy graphics, and other comforting features, but it seems a pity that we have used all that extra CPU and memory to increase the scope of what we develop, and the graphical prettiness, but not to speed the processes needed to complete a business procedure. Never mind the weight, the response time’s great! To achieve 200 ms response times on a Z80, or similar, performance considerations influenced everything one did as a developer. If it meant writing an entire application in assembly code, applying every smart algorithm, and shortcut imaginable to get the application to perform to spec, then so be it. As a result, I’m a dyed-in-the-wool performance freak and find it difficult to change my habits. Conversely, many developers now seem to feel quite differently. While all will acknowledge that performance is important, it’s no longer the virtue is once was, and other factors such as user-experience now take precedence. Am I wrong? If not, then perhaps we need a new school of development technique to rival Agile, dedicated once again to producing applications that smoke the rear wheels rather than pootle elegantly to the shops; that forgo skeuomorphism, cute animation, or architectural elegance in favor of the smell of hot rubber. I struggle to name an application I use that is truly notable for its blistering performance, and would dearly love one to do my everyday work – just as long as it doesn’t go faster than my brain.

    Read the article

  • Support ARMv7 instruction set in Windows Embedded Compact applications

    - by Valter Minute
    On of the most interesting new features of Windows Embedded Compact 7 is support for the ARMv5, ARMv6 and ARMv7 instruction sets instead of the ARMv4 “generic” support provided by the previous releases. This means that code build for Windows Embedded Compact 7 can leverage features (like the FPU unit for ARMv6 and v7) and instructions of the recent ARM cores and improve their performances. Those improvements are noticeable in graphics, floating point calculation and data processing. The ARMv7 instruction set is supported by the latest Cortex-A8, A9 and A15 processor families. Those processor are currently used in tablets, smartphones, in-car navigation systems and provide a great amount of processing power and a low amount of electric power making them very interesting for portable device but also for any kind of device that requires a rich user interface, processing power, connectivity and has to keep its power consumption low. The bad news is that the compiler provided with Visual Studio 2008 does not provide support for ARMv7, building native applications using just the ARMv4 instruction set. Porting a Visual Studio “Smart Device” native C/C++ project to Platform Builder is not easy and you’ll lack many of the features that the VS2008 application development environment provides. You’ll also need access to the BSP and OSDesign configuration for your device to be able to build and debug your application inside Platform Builder and this may prevent independent software vendors from using the new compiler to improve their applications performances. Adeneo Embedded now provides a whitepaper and a Visual Studio plug-in that allows usage of the new ARMv7 enabled compiler to build applications inside Visual Studio 2008. I worked on the whitepaper and the tools, with the help of my colleagues and now the results can be downloaded from Adeneo Embedded’s website: http://www.adeneo-embedded.com/OS-Technologies/Windows-Embedded (Click on the “WEC7 ARMv7 Whitepaper tab to access the download links, free registration required) A very basic benchmark showed a very good performance improvement in integer and floating-point operations. Obviously your mileage may vary and we can’t promise the same amount of improvement on any application, but with a small effort on your side (even smaller if you use the plug-in) you can try on your own application. ARMv7 support is provided using Platform Builder’s compiler and VS2008 application debugger is not able to debut ARMv7 code, so you may need to put in place some workaround like keeping ARMv4 code for debugging etc.

    Read the article

  • Perfect is the enemy of “Good Enough”

    - by Daniel Moth
    This is one of the quotes that I was against, but now it is totally part of my core beliefs: "Perfect is the enemy of Good Enough" Folks used to share this quote a lot with me in my early career and my frequent interpretation was that they were incompetent people that were satisfied with mediocrity, i.e. I ignored them and their advice. (Yes, I went through an arrogance phase). I later "grew up" and "realized" that they were missing the point, so instead of ignoring them I would retort: "Of course we have to aim for perfection, because as human beings we'll never achieve perfection, so by aiming for perfection we will indeed achieve good enough results". (Yes, I went through a smart ass phase). Later I grew up a bit more and "understood" that what I was really being told is to finish my work earlier and move on to other things because by trying to perfect that one thing, another N things that I was responsible for were suffering by not getting my attention - all things on my plate need to move beyond the line, not just one of them to go way over the line. It is really a statement of increasing scale and scope. To put it in other words, getting PASS grades on 10 things is better than getting an A+ with distinction on 1-2 and a FAIL on the rest. Instead of saying “I am able to do very well these X items” it is best if you can say I can do well enough on these X * Y items”, where Y > 1. That is how breadth impact is achieved. In the future, I may grow up again and have a different interpretation, but for now - even though I secretly try to "perfect" things, I try not to do that at the expense of other responsibilities. This means that I haven't had anybody quote that saying to me in a while (or perhaps my quality of work has dropped so much that it doesn't apply to me any more - who knows :-)). Wikipedia attributes the quote to Voltaire and it also makes connections to the “Law of diminishing returns”, and to the “80-20 rule” or “Pareto principle”… it commonly takes 20% of the full time to complete 80% of a task while to complete the last 20% of a task takes 80% of the effort …check out the Wikipedia entry on “Perfect is the enemy of Good” and its links. Also use your favorite search engine to search and see what others are saying (Bing, Google) – it is worth internalizing this in a way that makes sense to you… Comments about this post by Daniel Moth welcome at the original blog.

    Read the article

  • Our own Daily WTF

    - by Dennis Vroegop
    Originally posted on: http://geekswithblogs.net/dvroegop/archive/2014/08/20/our-own-daily-wtf.aspxIf you're a developer, you've probably heard of the website the DailyWTF. If you haven't, head on over to http://www.thedailywtf.com and read. And laugh. I'll wait. Read it? Good. If you're a bit like me probably you've been wondering how on earth some people ever get hired as a software engineer. Most of the stories there seem to weird to be true: no developer would write software like that right? And then you run into a little nugget of code one of your co-workers wrote. And then you realize: "Hey, it happens everywhere!" Look at this piece of art I found in our codebase recently: public static decimal ToDecimal(this string input) {     System.Globalization.CultureInfo cultureInfo = System.Globalization.CultureInfo.InstalledUICulture;     var numberFormatInfo = (System.Globalization.NumberFormatInfo)cultureInfo.NumberFormat.Clone();     int dotIndex = input.IndexOf(".");     int commaIndex = input.IndexOf(",");     if (dotIndex > commaIndex)         numberFormatInfo.NumberDecimalSeparator = ".";     else if (commaIndex > dotIndex)         numberFormatInfo.NumberDecimalSeparator = ",";     decimal result;     if (decimal.TryParse(input, System.Globalization.NumberStyles.Float, numberFormatInfo, out result))         return result;     else         throw new Exception(string.Format("Invalid input for decimal parsing: {0}. Decimal separator: {1}.", input, numberFormatInfo.NumberDecimalSeparator)); }  Me and a collegue have been looking long and hard at this and what we concluded was the following: Apparently, we don't trust our users to be able to correctly set the culture in Windows. Users aren't able to determine if they should tell Windows to use a decimal point or a comma to display numbers. So what we've done here is make sure that whatever the user enters, we'll translate that into whatever the user WANTS to enter instead of what he actually did. So if you set your locale to US, since you're a US citizen, but you want to enter the number 12.34 in the Dutch style (because, you know, the Dutch are way cooler with numbers) so you enter 12,34 we will understand this and respect your wishes! Of course, if you change your mind and in the next input field you decide to use the decimal dot again, that's fine with us as well. We will do the hard work. Now, I am all for smart software. Software that can handle all sorts of input the user can think of. But this feels a little uhm, I don't know.. wrong.. Or am I too old fashioned?

    Read the article

  • So Much Happening at Devoxx

    - by Tori Wieldt
    Devoxx, the premier Java conference in Europe, has been sold out for a while. The organizers (thanks Stephan and crew!) cap the attendance to make sure all attendees have a great experience, and that speaks volumes about their priorities. The speakers, hackathons, labs, and networking are all first class. The Oracle Technology Network will be there, and if you were smart/lucky enough to get a ticket, come find us and join the fun: IoT Hack Fest Build fun and creative Internet of Things (IoT) applications with Java Embedded, Raspberry Pi and Leap Motion on the University Days (Monday and Tuesday). Learn from top experts Yara & Vinicius Senger and Geert Bevin at two Raspberry Pi & Leap Motion hands-on labs and hacking sessions. Bring your computer. Training and equipment will be provided. Devoxx will also host an Internet of Things shop in the exhibition floor where attendees can purchase Arduino, Raspberry PI and Robot starter kits. Bring your IoT wish list! Video Interviews Yolande Poirier and I will be interviewing members of the Java Community in the back of the Expo hall on Wednesday and Thursday. Videos are posted on Parleys and YouTube/Java. We have a few slots left, so contact me (you can DM @Java) if you want to share your insights or cool new tip or trick with the rest of the developer community. (No commercials, no fluff. Keep it techie and keep it real.)  Oracle Keynote Wednesday morning Mark Reinhold, Chief Java Platform Architect, and Brian Goetz, Java Language Architect will provide an update on Java 8 and beyond. Oracle Booth Drop by the Oracle booth to see old and new friends.  We'll have Java in Action demos and the experts to explain them and answer your questions. We are raffling off Raspberry Pi's each day, so be sure to get your badged scanned. We'll have beer in the booth each evening. Look for @Java in her lab coat.  See you at Devoxx! 

    Read the article

  • What You Said: Staying Productive While Working from home

    - by Jason Fitzpatrick
    Earlier this week we asked you to share your telecommuting/work-from-home productivity tips. Now we’re back with a tips and tricks roundup; read on to see how your fellow readers stay focused at home. By far and away the most common technique deployed as carefully isolating work from home life. Carol writes: I love working from home and have done so for 6 years now. I have a routine just as if I was going to an office, except my commute is 12 steps. I get ready for work, grab my purse and smart phone and go to up the steps to my office. I maintain a separate phone line and voice mail for work that I cannot answer from anywhere but my work desk. I use call forwarding when I travel so only my office phone number is published. I have VOIP phone service so I can forward calls from the internet if I forget, or need to change where the phone is forwarded. I do have a wired and wireless head set so I can go get a cold drink if on one of those long boring conference calls. I plan my ‘get off from work’ time and try to stick to it, as with any job some days I am late getting off, but it all works out. I make sure my office is for work only, any other computer play time is in a different part of the house on different computer. My office has laptop, dock, couple of monitors, multipurpose printer, fax, scanner, file cabinets – just like the office at a company. I just also happen to have a couple of golden retrievers that come to work with me and usually lay quietly until 5, and yes they know it is 5pm sometimes before I do. For me, one of the biggest concerns when working from home is not being unproductive, but the danger of never stopping work. You could keep going and going because let’s face it – the company will let you do it, so I set myself up to prevent that and maintain a separateness. HTG Explains: Does Your Android Phone Need an Antivirus? How To Use USB Drives With the Nexus 7 and Other Android Devices Why Does 64-Bit Windows Need a Separate “Program Files (x86)” Folder?

    Read the article

  • JavaOne 2013: (Key) Notes of a conference – State of the Java platform and all the roadmaps by Amis

    - by JuergenKress
    Last week’s JavaOne conference provided insights in the roadmap of the Java platform as well as in the current state of things in the Java community. The close relationship between Oracle and IBM concerning Java, the (continuing) lack of such a relationship with Google, the support from Microsoft for Java applications on its Azure cloud and the vibrant developer community – with over 200 different Java User Groups in many countries of the world. There were no major surprises or stunning announcements. Java EE 7 (release in June) was celebrated, the progress of Java 8 SE explained as well as the progress on Java Embedded and ME. The availability of NetBeans 7.4 RC1 and JDK 8 Early Adopters release as well as the open sourcing of project Avatar probably were the only real news stories. The convergence of JavaFX and Java SE is almost complete; the upcoming alignment of Java SE Embedded and Java ME is the next big consolidation step that will lead to a unified platform where developers can use the same skills, development tools and APIs on EE, SE, SE Embedded and ME development. This means that anything that runs on ME will run on SE (Embedded) and EE – not necessarily the reverse because not all SE APIs are part of the compact profile or the ME environment. However, the trimming down of the SE libraries and the increased capabilities of devices mean that a pretty rich JVM runs on many devices – such as JavaFX 8 on the Raspberry PI. The major theme of the conference was Internet of Things. A world of things that are smart and connected, devices like sensors, cameras and equipment from cars, fridges and television sets to printers, security gates and kiosks that all run Java and are all capable of sending data over local network connections or directly over the internet. The number of devices that has these capabilities is rapidly growing. This means that the number of places where Java programs can help program the behavior of devices is growing too. It also means that the volume of data generated is expanding and that we have to find ways to harvest that data, possibly do a local pre-processing (filter, aggregate) and channel the data to back end systems. Terms typically used are edge devices (small, simple, publishing data), gateways (receiving data from many devices, collecting and consolidating, pre-processing, sending onwards to back end – typically using real time event processing) and enterprise services – receiving the data-turned-information from the gateways to further consolidate, distribute and act upon. A cheap device like the Raspberry PI is a perfect way to get started as a Java developer with what embedded (device) programming means and how interaction with physical input and output takes place. Roadmaps The over all progress on Java is visualized in this overview: Read the full article here. WebLogic Partner Community For regular information become a member in the WebLogic Partner Community please visit: http://www.oracle.com/partners/goto/wls-emea ( OPN account required). If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Mix Forum Wiki Technorati Tags: Amis,OOW,Oracle OpenWorld,JavaOne,WebLogic,WebLogic Community,Oracle,OPN,Jürgen Kress

    Read the article

  • In-Store Tracking Gets a Little Harder

    - by David Dorf
    Remember how Nordstrom was tracking shopper movements within their stores using the unique number, called a MAC, emitted by the WiFi radio in smartphones?  The phones didn't need to connect to the network, only have their WiFi enabled, as most people do by default.  They did this, presumably, to track shoppers' path to purchase and better understand traffic patterns.  Although there were signs explaining this at the entrances, people didn't like the notion of being tracked.  (Nevermind that there are cameras in the ceiling watching them.)  Nordstrom stopped the program. To address this concern the Future of Privacy, a Washington think tank, created Smart Store Privacy, a do-not-track service that allows consumers to register their MAC address in much the same way people register their phone numbers in the national do-not-call list.  A group of companies agreed to respect consumers' wishes and ignore smartphones listed in the database.  The database includes Bluetooth identifiers as well.  Of course you could simply turn your bluetooth and WiFi off when shopping as well. Most know that Apple prefers to use BLE beacons to contact and track smartphones within their stores.  This feature extends the typical online experience to also work in physical stores.  By identifying themselves, shoppers can expect a more tailored shopping experience much like what we've come to expect from Amazon's website, with product recommendations and offers that are (usually) relevant. But the upcoming release of iOS8 is purported to have a new feature that randomizes the WiFi MAC address of smartphones during the "probing" phase.  That is, before connecting to the WiFi network, a random MAC number is used so as to keep the smartphone's real MAC address secret.  Unless you actually connect to the store's WiFi, they won't recognize the MAC address. The details on this are still sketchy, but if the random MAC is consistent for a short period, retailers will still be able to track movements anonymously, but they won't recognize repeat visitors.  That may be sufficient for traffic analytics, but it will stymie target marketing.  In the case of marketing, using iBeacons with opt-in permission from consumers will be the way forward. There is always a battle between utility and privacy, so I expect many more changes in this area.  Incidentally, if you'd like to see where beacons are being used this site tracks them around the world.

    Read the article

< Previous Page | 61 62 63 64 65 66 67 68 69 70 71 72  | Next Page >