Search Results

Search found 1733 results on 70 pages for 'thermal printer'.

Page 65/70 | < Previous Page | 61 62 63 64 65 66 67 68 69 70  | Next Page >

  • My computer freezes irregurarly

    - by Manhim
    My computer started to freeze at irregular times for 3 weeks now. What happens My computer freezes, the video stops. (No graphic glitches, it just stops) Sound keeps playing up to some time (Usually 10-30 seconds) then stops playing. Sometimes, randomly, the screen on my G-15 keyboard flickers and I see caracters not at the right places. Usually happens for about 1-2 seconds and a bit before my computer freezes. I have to keep the power button pressed for 4 seconds to shut my computer down. I still hear my hard drives and fans working. Sometimes it works with no problems for a full day, some other times it just keeps freezing each time I restart my computer and I have to leave it for the rest of the day. Sometimes my mouse freezes for a fraction of a second (Like 0.01 to 0.2 seconds) quite randomly, usually before it freezes. No errors spotted by the "Action center" unlike when I had problems with my last video card on this system (Driver errors). My G-15 LCD screen also freezes. What I did so far I have had similar problems in the past and I had changed my hard drive (It was faulty), so I tested my software RAID-0 array and it was faulty so I changed it. (I reinstalled Windows 7 with this part). I also tested with unplugging my secondary hard drive. My CPU was running at about 100 degree Celsius, I removed the dust between the fans and the heatsink and it's now between 50-60. I ran a CPU stress-test and it didn't freeze during the tests (using Prime95 on all cores) Ran a memory test (using memtest86+) for a single pass and there were no errors. Ran a GPU stress test with ati-tools and furmark and it didn't freeze during the tests. (No artefacts either) I had troubles with my graphic card when I got it, but I think that it got fixed with a driver update. I checked the voltages in my BIOS setup and they all seemed ok (±0.2 I think). I have ran on the computer without problems with Fedora 15 on an external hard drive (Appart that it couldn't load Gnome 3 and was reverting to Gnome 2, didn't want to install drivers since I use it on multiple computers) I used it to backup my files from the raid array to my 1TB hard drive for the reinstallation of Windows. (So the crashes only happenned on Windows) [The external hard drive is plugged directly on a SATA port] I contacted EVGA (My graphic card vendor) and pointed them on this question, I'm looking for an answer. Ran sensors on Fedora 15 and got this output: http://pastebin.com/0BHJnAvu When it happens When I play video games (Mostly) When I play flash games (Second most) When I'm looking at my desktop background (It rarely happens when I have a window open, but it does, sometimes) Specs Windows Seven x64 Home Premium Motherboard: M2N-SLI Deluxe CPU: AMD Phenom 9950 x2 @ 2.6GHz Memory: Kingston 4x2GB Dual Channel (Pretty basic memory sticks) Hard drives: Was 2x250GB (Western digital caviar) in raid-0 + 1TB (WD caviar black), I replaced the raid array with a 750GB (WD caviar black) [Yes I removed the array from the raid configurations] 750W Power supply No overcloking. Ever. There have been some power-downs like 4-5 weeks ago, but the problem didn't start immediately after. (I wasn't home, so my computer got shut-down) My current to-try list Change the thermal paste on my CPU. Change my graphic card with a temporary one and stress the computer. Change my power supply. In this situation, how can I successfully pin-point the current hardware problem? (If it's a hardware problem) Because I don't really have the budget to just forget and replace everything. I also don't really have hardware to test-replace current hardware.

    Read the article

  • Fan running continously on HP Pavillion G6 notebook with 12.04.1 LTS, help please?

    - by Ankit
    Fan is running continously on my HP Pavillion G6 notebook with 12.04.1 LTS. My system specifications are:- Ram: 6Gb Graphics Card:- 1 GB (AMD Raedon 64XX). HDD: 540 GB. Please find a list of ACPI errors logs from dmesg as follows:- buffer@ankit:~$ dmesg | grep ACPI -i [ 0.000000] BIOS-e820: 000000009cebf000 - 000000009cfbf000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000009cfbf000 - 000000009cfff000 (ACPI data) [ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 HPQOEM) [ 0.000000] ACPI: XSDT 000000009cffe120 00084 (v01 HPQOEM SLIC-MPC 00000001 01000013) [ 0.000000] ACPI: FACP 000000009cffc000 000F4 (v04 HPQOEM SLIC-MPC 00000001 MSFT 01000013) [ 0.000000] ACPI: DSDT 000000009cfec000 0C132 (v01 HP 1670 00000000 MSFT 01000013) [ 0.000000] ACPI: FACS 000000009cf6c000 00040 [ 0.000000] ACPI: ASF! 000000009cffd000 000A5 (v32 HP 1670 00000001 MSFT 01000013) [ 0.000000] ACPI: HPET 000000009cffb000 00038 (v01 HP 1670 00000001 MSFT 01000013) [ 0.000000] ACPI: APIC 000000009cffa000 0008C (v02 HP 1670 00000001 MSFT 01000013) [ 0.000000] ACPI: MCFG 000000009cff9000 0003C (v01 HP 1670 00000001 MSFT 01000013) [ 0.000000] ACPI: SLIC 000000009cfeb000 00176 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013) [ 0.000000] ACPI: SSDT 000000009cfea000 00D52 (v01 HP 1670 00001000 MSFT 01000013) [ 0.000000] ACPI: BOOT 000000009cfe8000 00028 (v01 HP 1670 00000001 MSFT 01000013) [ 0.000000] ACPI: ASPT 000000009cfe5000 00034 (v07 HP 1670 00000001 MSFT 01000013) [ 0.000000] ACPI: SSDT 000000009cfe4000 00780 (v01 HP 1670 00003000 INTL 20100121) [ 0.000000] ACPI: SSDT 000000009cfe3000 00996 (v01 HP 1670 00003000 INTL 20100121) [ 0.000000] ACPI: SSDT 000000009cfdd000 0219F (v01 HP 1670 00001000 INTL 20100121) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.005902] ACPI: Core revision 20110623 [ 0.536006] PM: Registering ACPI NVS region at 9cebf000 (1048576 bytes) [ 0.538423] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.538429] ACPI: bus type pci registered [ 0.656088] ACPI: Added _OSI(Module Device) [ 0.656094] ACPI: Added _OSI(Processor Device) [ 0.656098] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.656103] ACPI: Added _OSI(Processor Aggregator Device) [ 0.660335] ACPI: EC: Look up EC in DSDT [ 0.664416] ACPI: Executed 1 blocks of module-level executable AML code [ 0.728303] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.729536] ACPI: SSDT 000000009ce70798 00727 (v01 PmRef Cpu0Cst 00003001 INTL 20100121) [ 0.730622] ACPI: Dynamic OEM Table Load: [ 0.730630] ACPI: SSDT (null) 00727 (v01 PmRef Cpu0Cst 00003001 INTL 20100121) [ 0.760829] ACPI: SSDT 000000009ce71a98 00303 (v01 PmRef ApIst 00003000 INTL 20100121) [ 0.761992] ACPI: Dynamic OEM Table Load: [ 0.761998] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20100121) [ 0.792451] ACPI: SSDT 000000009ce6fd98 00119 (v01 PmRef ApCst 00003000 INTL 20100121) [ 0.793521] ACPI: Dynamic OEM Table Load: [ 0.793528] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20100121) [ 0.872981] ACPI: Interpreter enabled [ 0.872992] ACPI: (supports S0 S3 S4 S5) [ 0.873064] ACPI: Using IOAPIC for interrupt routing [ 0.882723] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62 [ 0.883072] ACPI: No dock devices found. [ 0.883084] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.883882] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.924187] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.924509] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.924581] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 0.924659] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] [ 0.924758] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT] [ 0.924973] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.925064] pci0000:00: ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d [ 0.925069] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.930212] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.930327] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.930436] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.930547] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.930655] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.930764] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.930873] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.930979] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.932142] PCI: Using ACPI for IRQ routing [ 0.967119] pnp: PnP ACPI init [ 0.967151] ACPI: bus type pnp registered [ 0.968356] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 0.968516] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.968586] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active) [ 0.968818] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.968915] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.969206] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.969293] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.969418] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.969528] pnp 00:08: Plug and Play ACPI device, IDs SYN1e3f SYN1e00 SYN0002 PNP0f13 (active) [ 0.969969] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.970574] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.970617] pnp: PnP ACPI: found 11 devices [ 0.970622] ACPI: ACPI bus type pnp unregistered [ 1.138064] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 1.138331] ACPI: AC Adapter [ACAD] (off-line) [ 1.139068] ACPI: Lid Switch [LID0] [ 1.139176] ACPI: Power Button [PWRB] [ 1.139286] ACPI: Power Button [PWRF] [ 1.144637] ACPI: Thermal Zone [TZ01] (0 C) [ 1.144677] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 1.144693] ACPI: Battery Slot [BAT0] (battery present) [ 1.206926] ACPI: Battery Slot [BAT0] (battery present) [ 13.176993] acpi device:1a: registered as cooling_device4 [ 13.179931] acpi device:1b: registered as cooling_device5 [ 13.180221] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 13.219589] acpi device:20: registered as cooling_device6 [ 13.220851] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 1649.915134] i8042 aux 00:08: wake-up capability disabled by ACPI [ 1649.915147] i8042 kbd 00:07: wake-up capability enabled by ACPI [ 1650.931028] r8169 0000:03:00.0: wake-up capability enabled by ACPI [ 1650.954743] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI [ 1650.978733] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI [ 1651.010950] ACPI: Preparing to enter system sleep state S3 [ 1652.251505] ACPI: Low-level resume complete [ 1652.360953] ACPI: Waking up from system sleep state S3 [ 1652.427581] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI [ 1652.435579] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI [ 1652.437887] r8169 0000:03:00.0: wake-up capability disabled by ACPI [ 1652.506660] i8042 kbd 00:07: wake-up capability disabled by ACPI [ 1661.238234] ACPI Error: No handler for Region [CMS0] (ffff8801d5035558) [SystemCMOS] (20110623/evregion-373) [ 1661.238253] ACPI Error: Region SystemCMOS (ID=5) has no handler (20110623/exfldio-292) [ 1661.238268] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_._Q33] (Node ffff8801d5054de8), AE_NOT_EXIST (20110623/psparse-536) [ 3151.784288] i8042 aux 00:08: wake-up capability disabled by ACPI [ 3151.784301] i8042 kbd 00:07: wake-up capability enabled by ACPI [ 3152.797676] r8169 0000:03:00.0: wake-up capability enabled by ACPI [ 3152.821379] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI [ 3152.845367] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI [ 3152.877600] ACPI: Preparing to enter system sleep state S3 [ 3154.313213] ACPI: Low-level resume complete [ 3154.422297] ACPI: Waking up from system sleep state S3 [ 3154.489692] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI [ 3154.497667] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI [ 3154.505947] r8169 0000:03:00.0: wake-up capability disabled by ACPI [ 3154.568985] i8042 kbd 00:07: wake-up capability disabled by ACPI [ 3162.745149] ACPI Error: No handler for Region [CMS0] (ffff8801d5035558) [SystemCMOS] (20110623/evregion-373) [ 3162.745168] ACPI Error: Region SystemCMOS (ID=5) has no handler (20110623/exfldio-292) [ 3162.745183] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_._Q33] (Node ffff8801d5054de8), AE_NOT_EXIST (20110623/psparse-536) [ 6775.723501] ACPI Error: No handler for Region [CMS0] (ffff8801d5035558) [SystemCMOS] (20110623/evregion-373) [ 6775.723519] ACPI Error: Region SystemCMOS (ID=5) has no handler (20110623/exfldio-292) [ 6775.723535] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_._Q33] (Node ffff8801d5054de8), AE_NOT_EXIST (20110623/psparse-536) [10388.004760] ACPI Error: No handler for Region [CMS0] (ffff8801d5035558) [SystemCMOS] (20110623/evregion-373) [10388.004778] ACPI Error: Region SystemCMOS (ID=5) has no handler (20110623/exfldio-292) [10388.004801] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_._Q33] (Node ffff8801d5054de8), AE_NOT_EXIST (20110623/psparse-536) [10723.591930] i8042 aux 00:08: wake-up capability disabled by ACPI [10723.591942] i8042 kbd 00:07: wake-up capability enabled by ACPI [10724.607624] r8169 0000:03:00.0: wake-up capability enabled by ACPI [10724.631349] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI [10724.655339] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI [10724.687572] ACPI: Preparing to enter system sleep state S3 [10726.123176] ACPI: Low-level resume complete [10726.232181] ACPI: Waking up from system sleep state S3 [10726.303653] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI [10726.311648] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI [10726.315734] r8169 0000:03:00.0: wake-up capability disabled by ACPI [10726.379287] i8042 kbd 00:07: wake-up capability disabled by ACPI [10734.393523] ACPI Error: No handler for Region [CMS0] (ffff8801d5035558) [SystemCMOS] (20110623/evregion-373) [10734.393542] ACPI Error: Region SystemCMOS (ID=5) has no handler (20110623/exfldio-292) [10734.393557] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_._Q33] (Node ffff8801d5054de8), AE_NOT_EXIST (20110623/ps Continuous sound from the fan is very annoying, any help would highly appreciated.

    Read the article

  • Corsair Hackers Reboot

    It wasn't easy for me to attend but it was absolutely worth to go. The Linux User Group of Mauritius (LUGM) organised another get-together for any open source enthusiast here on the island. Strangely named "Corsair Hackers Reboot" but it stands for a positive cause: "Corsair Hackers Reboot Event A collaborative activity involving LUGM, UoM Computer Club, Fortune Way Shopping Mall and several geeks from around the island, striving to put FOSS into homes & offices. The public is invited to discover and explore Free Software & Open Source." And it was a good opportunity for me and the kids to visit the east coast of Mauritius, too. Perfect timing It couldn't have been better... Why? Well, for two important reasons (in terms of IT): End of support for Microsoft Windows XP - 08.04.2014 Release of Ubuntu 14.04 Long Term Support - 17.04.2014 Quite funnily, those two IT dates weren't the initial reasons and only during the weeks of preparations we put those together. And therefore it was even more positive to promote the use of Linux and open source software in general to a broader audience. Getting there ... Thanks to the new motor way M3 and all the additional road work which has been completed recently it was very simple to get across the island in a very quick and relaxed manner. Compared to my trips in the early days of living in Mauritius (and riding on a scooter) it was very smooth and within less than an hour we hit Centrale de Flacq. Well, being in the city doesn't necessarily mean that one has arrived at the destination. But thanks to modern technology I had a quick look on Google Maps, and we finally managed to get a parking behind the huge bus terminal in Flacq. From there it was just a short walk to Fortune Way. The children were trying to count the number of buses... Well, lots and lots of buses - really impressive actually. What was presented? There were different areas set up. Right at the entrance one's attention was directly drawn towards the elevated hacker's stage. Similar to rock stars performing their gig there was bunch of computers, laptops and networking equipment in order to cater the right working conditions for coding/programming challenge(s) on the one hand and for the pen-testing or system hacking competition on the other hand. Personally, I was very impresses that actually Nitin took care of the pen-testing competition. He hardly started one year back with Linux in general, and Kali Linux specifically. Seeing his personal development from absolute newbie to a decent Linux system administrator within such a short period of time, is really impressive. His passion to open source software made him a living. Next, clock-wise seen, was the Kid's Corner with face-painting as the main attraction. Additionally, there were numerous paper print outs to colour. Plus a decent workstation with the educational suite GCompris. Of course, my little ones were into that. They already know GCompris since a while as they are allowed to use it on an IGEL thin client terminal here at home. To simplify my life, I set up GCompris as full-screen guest session on the server, and they can pass the login screen without any further obstacles. And because it's a thin client hooked up to a XDMCP remote session I don't have to worry about the hardware on their desk, too. The next section was the main attraction of the event: BYOD - Bring Your Own Device Well, compared to the usual context of BYOD the corsairs had a completely different intention. Here, you could bring your own laptop and a team of knowledgeable experts - read: geeks and so on - offered to fully convert your system on any Linux distribution of your choice. And even though I came later, I was told that the USB pen drives had been in permanent use. From being prepared via dd command over launching LiveCD session to finally installing a fresh Linux system on bare metal. Most interestingly, I did a similar job already a couple of months ago, while upgrading an existing Windows XP system to Xubuntu 13.10. So far, the female owner is very happy and enjoys her system almost every evening to go shopping online, checking mails, and reading latest news from the Anime world. Back to the Hackers event, Ish told me that they managed approximately 20 conversion during the day. Furthermore, Ajay and others gladly assisted some visitors with some tricky issues and by the end of the day you can call is a success. While I was around, there was a elderly male visitor that got a full-fledged system conversion to a Linux system running completely in French language. A little bit more to the centre it was Yasir's turn to demonstrate his Arduino hardware that he hooked up with an experimental electrical circuit board connected to an LCD matrix display. That's the real spirit of hacking, and he showed some minor adjustments on the fly while demo'ing the system. Also, very interesting there was a thermal sensor around. Personally, I think that platforms like the Arduino as well as the Raspberry Pi have a great potential at a very affordable price in order to bring a better understanding of electronics as well as computer programming to a broader audience. It would be great to see more of those experiments during future activities. And last but not least there were a small number of vendors. Amongst them was Emtel - once again as sponsor of the general internet connectivity - and another hardware supplier from Riche Terre shopping mall. They had a good collection of Android related gimmicks, like a autonomous web cam that can convert any TV with HDMI connector into an online video chat system given WiFi. It's actually kind of awesome to have a Skype or Google hangout video session on the big screen rather than on the laptop. Some pictures of the event LUGM: Great conversations on Linux, open source and free software during the Corsair Hackers Reboot LUGM: Educational workstation running GCompris suite attracted the youngest attendees of the day. Of course, face painting had to be done prior to hacking... LUGM: Nadim demoing some Linux specifics to interested visitors. Everyone was pretty busy during the whole day LUGM: The hacking competition, here pen-testing a wireless connection and access point between multiple machines LUGM: Well prepared workstations to be able to 'upgrade' visitors' machines to any Linux operating system Final thoughts Gratefully, during the preparations of the event I was invited to leave some comments or suggestions, and the team of the LUGM did a great job. The outdoor banner was a eye-catcher, the various flyers and posters for the event were clearly written and as far as I understood from the quick chats I had with Ish, Nadim, Nitin, Ajay, and of course others all were very happy about the event execution. Great job, LUGM! And I'm already looking forward to the next Corsair Hackers Reboot event ... Crossing fingers: Very soon and hopefully this year again :) Update: In the media The event had been announced in local media, too. L'Express: Salon informatique: Hacking Challenge à Flacq

    Read the article

  • Wireless networks are not detected at start up in Ubuntu 12.04

    - by Kanhaiya Mishra
    I have recently (three four days ago) installed Ubuntu 12.04 via windows installer i.e. wubi.exe. After the installation completed wireless and Ethernet were both working well. But after restart wireless networks didn't show up while in the network manager both networking and wireless were enabled. Though sometimes after boot it did show the networks available but very rarely. So I went through various posts regarding wireless issues in Ubuntu 12.04 and tried so many things but ended up in nothing satisfactory. I have Broadcom 4313 LAN network controller and brcmsmac driver. Then relying on some suggestions I tried to install bcm-wl driver but couldn't install due to some error in jockeyl.log file. Then i tried fresh installation of the same driver but still could resolve the startup issues with wireless. Then again I reinstalled Ubuntu inside windows using wubi installer. This time again same problem occurred after boot. But this time I successfully installed wl driver before disturbing file-system files of Ubuntu. But again the same issue. This time I noticed some new things: If I inserted Ethernet/LAN cable before startup then wireless networks are available and of course LAN(wired) networks also work. but if i don't plug in cable before startup and then plug it after startup then it didn't detect Ethernet network neither wireless. So I haven't noticed it before that LAN along with wifi also doesn't work after startup. But if i suspend the session and make it sleep and again login then it worked. I tried it every time that WLAN worked perfectly. But still i m unable to resolve that startup problem. Each time i boot first I have to suspend it once then only networks are available. It irritates me each time i reboot/boot my lappy. So please help out of this problem. Any ideas/help regarding this issue would be highly appreciated. Some of the commands that i run gave following results: # lspci 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 12) 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 12) 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) 00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06) 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06) 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 06) 00:1c.5 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 6 (rev 06) 00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a6) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 06) 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller (rev 06) 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 06) 00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 06) 03:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01) 04:00.0 Ethernet controller: Atheros Communications Inc. AR8152 v1.1 Fast Ethernet (rev c1) ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02) ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02) ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02) ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02) ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02) ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02) # sudo lshw -C network *-network description: Wireless interface product: BCM4313 802.11b/g/n Wireless LAN Controller vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: eth1 version: 01 serial: 70:f1:a1:49:b6:ab width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=5.100.82.38 ip=192.168.1.7 latency=0 multicast=yes wireless=IEEE 802.11 resources: irq:17 memory:f0500000-f0503fff *-network description: Ethernet interface product: AR8152 v1.1 Fast Ethernet vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:04:00.0 logical name: eth0 version: c1 serial: b8:ac:6f:6b:f7:4a capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vpd bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1c driverversion=1.0.1.0-NAPI firmware=N/A latency=0 link=no multicast=yes port=twisted pair resources: irq:44 memory:f0400000-f043ffff ioport:2000(size=128) # lsmod | grep wl wl 2568210 0 lib80211 14381 2 lib80211_crypt_tkip,wl # sudo iwlist eth1 scanning eth1 Scan completed : Cell 01 - Address: 30:46:9A:85:DA:9A ESSID:"BH DASHIR 2" Mode:Managed Frequency:2.462 GHz (Channel 11) Quality:4/5 Signal level:-60 dBm Noise level:-98 dBm IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : CCMP Pairwise Ciphers (1) : CCMP Authentication Suites (1) : PSK IE: Unknown: DD7F0050F204104A00011010440001021041000100103B000103104700109AFE7D908F8E2D381860668BA2E8D8771021000D4E4554474541522C20496E632E10230009574752363134763130102400095747523631347631301042000538333235381054000800060050F204000110110009574752363134763130100800020084 Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s 24 Mb/s; 36 Mb/s; 54 Mb/s; 6 Mb/s; 9 Mb/s 12 Mb/s; 48 Mb/s Cell 02 - Address: C0:3F:0E:EB:45:14 ESSID:"BH DASHIR 3" Mode:Managed Frequency:2.462 GHz (Channel 11) Quality:2/5 Signal level:-71 dBm Noise level:-98 dBm IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : CCMP Pairwise Ciphers (1) : CCMP Authentication Suites (1) : PSK IE: Unknown: DD7F0050F204104A00011010440001021041000100103B00010310470010F3C9BBE499D140540F530E7EBEDE2F671021000D4E4554474541522C20496E632E10230009574752363134763130102400095747523631347631301042000538333235381054000800060050F204000110110009574752363134763130100800020084 Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s 24 Mb/s; 36 Mb/s; 54 Mb/s; 6 Mb/s; 9 Mb/s 12 Mb/s; 48 Mb/s Cell 03 - Address: A0:21:B7:A8:2F:C0 ESSID:"BH DASHIR 4" Mode:Managed Frequency:2.422 GHz (Channel 3) Quality:1/5 Signal level:-86 dBm Noise level:-98 dBm IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : CCMP Pairwise Ciphers (1) : CCMP Authentication Suites (1) : PSK IE: Unknown: DD8B0050F204104A0001101044000102103B0001031047001000000000000010000000A021B7A82FC01021000D4E6574676561722C20496E632E10230009574E523130303076321024000456324831104200046E6F6E651054000800060050F20400011011001B574E5231303030763228576972656C6573732041502D322E344729100800020086103C000103 Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s 48 Mb/s; 54 Mb/s

    Read the article

  • Google Chrome OS

    - by Piet
    It’s about time someone took this initiative: Google Chrome OS I especially like the following: Speed, simplicity and security are the key aspects of Google Chrome OS. We’re designing the OS to be fast and lightweight, to start up and get you onto the web in a few seconds. The user interface is minimal to stay out of your way, and most of the user experience takes place on the web. And as we did for the Google Chrome browser, we are going back to the basics and completely redesigning the underlying security architecture of the OS so that users don’t have to deal with viruses, malware and security updates. It should just work. I recently had the ‘pleasure’ witnessing several 60+ yr old friends and family (all respect for everyone in their 2nd or 3rd youth) buying their first pc, taking their first steps using a pc and the net. Have you ever seen the gazillions of little ‘useful’ tools that are installed on a new standard Vista pc or laptop ? This is like learning to drive a new car and being placed in an airplane cockpit. And all the messages one gets about virus/security checks, fingerprint nog being enrolled, trial period expiring (because half those really useful tools come with a trial period), … If I was in their shoes, being confronted with this as a total newbie, I guess I’d just give up pretty soon. As a matter of fact, I actually gave up on Vista on my work-laptop, it was driving me crazy. Thank god I was allowed to install XP. I’m a Linux user at home, and Vista was such a frustrating experience that Windows XP actually felt like breath of fresh air. And what are those people using? Email, browsing…. and maybe writing a little letter now and then or storing their photo’s if they have a digital camera. Actually (side note), I get the impression that hearing about facebook is a major motivator for the digital newbies to finally take the plunge, buy a pc and get on-line. And OK, we’ve seen initiatives like this before, but Google is a brand everyone knows… unlike Ubuntu, Debain or Mandriva. Google = God. If I was Microsoft I’d be wetting my pants knowing Google was about to release their own OS, without a doubt fully optimized to use their own on-line office suit. On the other hand, the old adage ‘no one ever got fired for choosing Microsoft’ still holds a lot of truth. I hope I’ll be able to give it a big thumbs up if a would-be pc-user asks me what kind of pc/OS they should go for in the near future. On the other hand, if I’d do that, I’m pretty sure a couple of weeks later I’d get a call asking how to install this game or photo editing tool they got from one of their Windows using friends… or that nifty photo-printer they just bought. But then, I also get those questions now from newbie Windows users. It takes a couple of years before Newbie pc users understand that some things just don’t work and aren’t worth the time trying to fix them. I’d just wish they’d go back to the shop when something doesn’t work. You also don’t let you mechanic friend try to fix a problem with your brand new car. But that’s another story… Wait and see…

    Read the article

  • Ask the Readers: Backing Your Files Up – Local Storage versus the Cloud

    - by Asian Angel
    Backing up important files is something that all of us should do on a regular basis, but may not have given as much thought to as we should. This week we would like to know if you use local storage, cloud storage, or a combination of both to back your files up. Photo by camknows. For some people local storage media may be the most convenient and/or affordable way to back up their files. Having those files stored on media under your control can also provide a sense of security and peace of mind. But storing your files locally may also have drawbacks if something happens to your storage media. So how do you know whether the benefits outweigh the disadvantages or not? Here are some possible pros and cons that may affect your decision to use local storage to back up your files: Local Storage Pros You are in control of your data Your files are portable and can go with you when needed if using external or flash drives Files are accessible without an internet connection You can easily add more storage capacity as needed (additional drives, etc.) Cons You need to arrange room for your storage media (if you have multiple externals drives, etc.) Possible hardware failure No access to your files if you forget to bring your storage media with you or it is too bulky to bring along Theft and/or loss of home with all contents due to circumstances like fire If you are someone who is always on the go and needs to travel as lightly as possible, cloud storage may be the perfect way for you to back up and access your files. Perhaps your laptop has a hard-drive failure or gets stolen…unhappy events to be sure, but you will still have a copy of your files available. Perhaps a company wants to make sure their records, files, and other information are backed up off site in case of a major hardware or system failure…expensive and/or frustrating to fix if it happens, but once again there is a nice backup ready to go once things are fixed. As with local storage, here are some possible pros and cons that may influence your choice of cloud storage to back up your files: Cloud Storage Pros No need to carry around flash or bulky external drives All of your files are accessible wherever there is an internet connection No need to deal with local storage media (or its’ upkeep) Your files are still safe if your home is broken into or other unfortunate circumstances occur Cons Your files and data are not 100% under your control Possible hardware failure or loss of files on the part of your cloud storage provider (this could include a disgruntled employee wreaking havoc) No access to your files if you do not have an internet connection The cloud storage provider may eventually shutdown due to financial hardship or other unforeseen circumstances The possibility of your files and data being stolen by hackers due to a security breach on the part of your cloud storage provider You may also prefer to try and cover all of the possibilities by using both local and cloud storage to back up your files. If something happens to one, you always have the other to fall back on. Need access to those files at or away from home? As long as you have access to either your storage media or an internet connection, you are good to go. Maybe you are getting ready to choose a backup solution but are not sure which one would work better for you. Here is your chance to ask your fellow HTG readers which one they would recommend. Got a great backup solution already in place? Then be sure to share it with your fellow readers! How-To Geek Polls require Javascript. Please Click Here to View the Poll. Latest Features How-To Geek ETC The 20 Best How-To Geek Explainer Topics for 2010 How to Disable Caps Lock Key in Windows 7 or Vista How to Use the Avira Rescue CD to Clean Your Infected PC The Complete List of iPad Tips, Tricks, and Tutorials Is Your Desktop Printer More Expensive Than Printing Services? 20 OS X Keyboard Shortcuts You Might Not Know Winter Sunset by a Mountain Stream Wallpaper Add Sleek Style to Your Desktop with the Aston Martin Theme for Windows 7 Awesome WebGL Demo – Flight of the Navigator from Mozilla Sunrise on the Alien Desert Planet Wallpaper Add Falling Snow to Webpages with the Snowfall Extension for Opera [Browser Fun] Automatically Keep Up With the Latest Releases from Mozilla Labs in Firefox 4.0

    Read the article

  • Technology vs. Antiquated Methods

    - by AreYouSerious
    So Here I am talking with my Program lead, about technology, and how while my father is the VP of a major company, he still doesn't have a blackberry, or a smart phone. and I think it's funny. Most people would say it's a generational thing. That because he's older, he dosen't accept technology, and that's why. I have trouble swallowing that because this is the same man, who bought a satellite radio for his car, and made sure that the printer for the house was networked so that his and my mom's laptop could print wirelessly from the living room through their wireless network. I think it has to do with more with necessity, and partially with finical responsibility. My father is very financially conciencious. Think about it yourself. you pay for internet at your home. You have internet access at your office. But if you get a smart phone you're going to pay almost the same amount just for that access. A lot of people take it as just another fixed cost... I'm one of those. I don't even think about it, as I check my facebook from the bus, train, or even while sitting in traffic... The convience of having connection everywhere outweigh the financial responsible person screaming at in the back of my mind. However This conversation lead us to another venue of discussion.... what happens when the power dies. if you left your charger at home, or you phone or navi just stops working... are you going to be able to continue on as you did when it was working... let take the navi as an example... if your navi stops working, how many of you know how to use a map, and navigate? can you even find where you are on a map using the cross streets that your stopped at? This is a skill that unfortunatelly is overlooked these days in the child rearing process. Most people don't see the value, while some others can't do it themselves, so how can they teach their offspring? Take another example.... what if your phone gets lost... or stolen, or you drive over it? do you have the numbers in their memorized? are they recorded somewhere? I know that if it weren't for google sync I wouldn't have them backed up... not sufficiently. And what good does that do if you're in timbuckto and your phone dies, think you can get on the internet to look up those numbers? Don't get me wrong. I'm the first to see the value in technology, and am willing to pay the price to not have to wait for prices to come down. I will pay extra to have that newest thing right now. but let me tell you what.... I know that should I ever procreate it will be a requirement for my offspring (children) to learn how to do something manually before I'll let them use technology. Food for thought?? Let everyone else know what you think.... just sayin'

    Read the article

  • Use Case Actors - Primary versus Secondary

    - by Dave Burke
    The Unified Modeling Language (UML1) defines an Actor (from UseCases) as: An actor specifies a role played by a user or any other system that interacts with the subject. In Alistair Cockburn’s book “Writing Effective Use Cases” (2) Actors are further defined as follows: Primary Actor: The primary actor of a use case is the stakeholder that calls on the system to deliver one of its services. It has a goal with respect to the system – one that can be satisfied by its operation. The primary actor is often, but not always, the actor who triggers the use case. Supporting Actors: A supporting actor in a use case in an external actor that provides a service to the system under design. It might be a high-speed printer, a web service, or humans that have to do some research and get back to us. In a 2006 article (3) Cockburn refined the definitions slightly to read: Primary Actors: The Actor(s) using the system to achieve a goal. The Use Case documents the interactions between the system and the actors to achieve the goal of the primary actor. Secondary Actors: Actors that the system needs assistance from to achieve the primary actor’s goal. Finally, the Oracle Unified Method (OUM) concurs with the UML definition of Actors, along with Cockburn’s refinement, but OUM also includes the following: Secondary actors may or may not have goals that they expect to be satisfied by the use case, the primary actor always has a goal, and the use case exists to satisfy the primary actor. Now that we are on the same “page”, let’s consider two examples: A bank loan officer wants to review a loan application from a customer, and part of the process involves a real-time credit rating check. Use Case Name: Review Loan Application Primary Actor: Loan Officer Secondary Actors: Credit Rating System A Human Resources manager wants to change the job code of an employee, and as part of the process, automatically notify several other departments within the company of the change. Use Case Name: Maintain Job Code Primary Actor: Human Resources Manager Secondary Actors: None The first example is quite straight forward; we need to define the Secondary Actor because without the “Credit Rating System” we cannot successfully complete the Use Case. In other words, the goal of the Primary Actor is to successfully complete the Loan Application, but they need the explicit “help” of the Secondary Actor (Credit Rating System) to achieve this goal. The second example is where people sometimes get confused. Within OUM we would not include the “other departments” as Secondary Actors and therefore not include them on the Use Case diagram for the following reasons: The other departments are not required for the successful completion of the Use Case We are not expecting any response from the other departments (at least within the bounds of the Use Case under discussion) Having said that, within the detail of the Use Case Specification Main Success Scenario, we would include something like: “The system sends a notification to the related department heads (ref. Business Rule BR101)” Now let’s consider one final example. A Procurement Manager wants to place a “bid” for some goods using an On-Line Trading Community (B2B version of eBay) Use Case Name: Create Bid Primary Actor: Procurement Manager Secondary Actors: On-Line Trading Community You might wonder why the Trading Community is listed as a Secondary Actor, i.e. if all we are going to do is place a bid for a specific quantity of goods at a given price and send that off to the Trading Community, then why would the Trading Community need to “assist” in that Use Case? Well, once again, it comes back to the “User Experience” and how we want to optimize that when we think about our Use Case, and ultimately, when the developer comes to assembling some code. In this final example, the Procurement Manager cannot successfully complete the “Create Bid” Use Case until they receive an affirmative confirmation back from the Trading Community that the Bid has been accepted. Therefore, the Trading Community must become a Secondary Actor and be referenced both on the Use Case diagram and Use Case Specification. Any astute readers who are wondering about the “single sitting” rule will have to wait for a follow-up Blog entry to find out how that consideration can be factored in!!! Happy Use Case writing! (1) OMG Unified Modeling LanguageTM (OMG UML), Superstructure Version 2.4.1 (2) Cockburn, A, 2000, Writing Effective Use Case, Addison-Wesley Professional; Edition 1 (3) Cockburn, A, 2006 “Use Case fundamentals” viewed 20th March 2012, http://alistair.cockburn.us/Use+case+fundamentals

    Read the article

  • Oracle Solaris Crash Analysis Tool 5.3 now available

    - by user12609056
    Oracle Solaris Crash Analysis Tool 5.3 The Oracle Solaris Crash Analysis Tool Team is happy to announce the availability of release 5.3.  This release addresses bugs discovered since the release of 5.2 plus enhancements to support Oracle Solaris 11 and updates to Oracle Solaris versions 7 through 10. The packages are available on My Oracle Support - simply search for Patch 13365310 to find the downloadable packages. Release Notes General blast support The blast GUI has been removed and is no longer supported. Oracle Solaris 2.6 Support As of Oracle Solaris Crash Analysis Tool 5.3, support for Oracle Solaris 2.6 has been dropped. If you have systems running Solaris 2.6, you will need to use Oracle Solaris Crash Analysis Tool 5.2 or earlier to read its crash dumps. New Commands Sanity Command Though one can re-run the sanity checks that are run at tool start-up using the coreinfo command, many users were unaware that they were. Though these checks can still be run using that command, a new command, namely sanity, can now be used to re-run the checks at any time. Interface Changes scat_explore -r and -t option The -r option has ben added to scat_explore so that a base directory can be specified and the -t op[tion was added to enable color taggging of the output. The scat_explore sub-command now accepts new options. Usage is: scat --scat_explore [-atv] [-r base_dir] [-d dest] [unix.N] [vmcore.]N Where: -v Verbose Mode: The command will print messages highlighting what it's doing. -a Auto Mode: The command does not prompt for input from the user as it runs. -d dest Instructs scat_explore to save it's output in the directory dest instead of the present working directory. -r base_dir Instructs scat_explore to save it's under the directory base_dir instead of the present working directory. If it is not specified using the -d option, scat_explore names it's output file as "scat_explore_system_name_hostid_lbolt_value_corefile_name." -t Enable color tags. When enabled, scat_explore tags important text with colors that match the level of importance. These colors correspond to the color normally printed when running Oracle Solaris Crash Analysis Tool in interactive mode. Tag Name Definition FATAL An extremely important message which should be investigated. WARNING A warning that may or may not have anything to do with the crash. ERROR An error, usually printer with a suggested command ALERT Used to indicate something the tool discovered. INFO Purely informational message INFO2 A follow-up to an INFO tagged message REDZONE Usually used when prnting memory info showing something is in the kernel's REDZONE. N The number of the crash dump. Specifying unix.N vmcore.N is optional and not required. Example: $ scat --scat_explore -a -v -r /tmp vmcore.0 #Output directory: /tmp/scat_explore_oomph_833a2959_0x28800_vmcore.0 #Tar filename: scat_explore_oomph_833a2959_0x28800_vmcore.0.tar #Extracting crash data... #Gathering standard crash data collections... #Panic string indicates a possible hang... #Gathering Hang Related data... #Creating tar file... #Compressing tar file... #Successful extraction SCAT_EXPLORE_DATA_DIR=/tmp/scat_explore_oomph_833a2959_0x28800_vmcore.0 Sending scat_explore results The .tar.gz file that results from a scat_explore run may be sent using Oracle Secure File Transfer. The Oracle Secure File Transfer User Guide describes how to use it to send a file. The send_scat_explore script now has a -t option for specifying a to address for sending the results. This option is mandatory. Known Issues There are a couple known issues that we are addressing in release 5.4, which you should expect to see soon: Display of timestamps in threads and clock information is incorrect in some cases. There are alignment issues with some of the tables produced by the tool.

    Read the article

  • WebCenter Customer Spotlight: Hyundai Motor Company

    - by me
    Author: Peter Reiser - Social Business Evangelist, Oracle WebCenter  Solution SummaryHyundai Motor Company is one of the world’s fastest-growing car manufacturers, ranked as the fifth-largest in 2011. The company also operates the world’s largest integrated automobile manufacturing facility in Ulsan, Republic of Korea, which can produce 1.6 million units per year. They  undertook a project to improve business efficiency and reinforce data security by centralizing the company’s sales, financial, and car manufacturing documents into a single repository. Hyundai Motor Company chose Oracle Exalogic, Oracle Exadata, Oracle WebLogic Sever, and Oracle WebCenter Content 11g, as they provided better performance, stability, storage, and scalability than their competitors.  Hyundai Motor Company cut the overall time spent each day on document-related work by around 85%, saved more than US$1 million in paper and printing costs, laid the foundation for a smart work environment, and supported their future growth in the competitive car industry. Company OverviewHyundai Motor Company is one of the world’s fastest-growing car manufacturers, ranked as the fifth-largest in 2011. The company also operates the world’s largest integrated automobile manufacturing facility in Ulsan, Republic of Korea, which can produce 1.6 million units per year. The company strives to enhance its brand image and market recognition by continuously improving the quality and design of its cars. Business Challenges To maximize the company’s growth potential, Hyundai Motor Company undertook a project to improve business efficiency and reinforce data security by centralizing the company’s sales, financial, and car manufacturing documents into a single repository. Specifically, they wanted to: Introduce a smart work environment to improve staff productivity and efficiency, and take advantage of rapid company growth due to new, enhanced car designs Replace a legacy document system managed by individual staff to improve collaboration, the visibility of corporate documents, and sharing of work-related files between employees Improve the security and storage of documents containing corporate intellectual property, and prevent intellectual property loss when staff leaves the company Eliminate delays when downloading files from the central server to a PC Build a large, single document repository to more efficiently manage and share data between 30,000 staff at the company’s headquarters Establish a scalable system that can be extended to Hyundai offices around the world Solution DeployedAfter conducting a large-scale benchmark test, Hyundai Motor Company chose Oracle Exalogic, Oracle Exadata, Oracle WebLogic Sever, and Oracle WebCenter Content 11g, as they provided better performance, stability, storage, and scalability than their competitors. Business Results Lowered the overall time spent each day on all document-related work by approximately 85%—from 4.5 hours to around 42 minutes on an average day Saved more than US$1 million per year in printer, paper, and toner costs, and laid the foundation for a completely paperless environment Reduced staff’s time spent requesting and receiving documents about car sales or designs from supervisors by 50%, by storing and managing all documents across the corporation in a single repository Cut the time required to draft new-car manufacturing, sales, and design documents by 20%, by allowing employees to reference high-quality data, such as marketing strategy and product planning documents already in the system Enhanced staff productivity at company headquarters by 9% by reducing the document-related tasks of 30,000 administrative and research and development staff Ensured the system could scale to hold 3 petabytes of car sales, manufacturing, and design data by 2013 and be deployed at branches worldwide We chose Oracle Exalogic, Oracle Exadata, and Oracle WebCenter Content to support our new document-centralization system over their competitors as Oracle offers stable storage for petabytes of data and high processing speeds. We have cut the overall time spent each day on document-related work by around 85%, saved more than US$1 million in paper and printing costs, laid the foundation for a smart work environment, and supported our future growth in the competitive car industry. Kang Tae-jin, Manager, General Affairs Team, Hyundai Motor Company Additional Information Hyundai Motor Company Customer Snapshot Oracle WebCenter Content

    Read the article

  • Ask the Readers: How Many Monitors Do You Use with Your Computer?

    - by Asian Angel
    Most people have a single monitor for their computers, many have two, and some individuals enjoy “3 monitor plus” goodness. This week we would like to know how many monitors you use with your computer. Photo by DamnedNice. A good majority of people have a single monitor that they use with their computers and that single monitor serves their needs very well. It could be that these individuals do not engage in a heavy amount of work or play on their computers…they just need to do the basics like checking e-mail, using I.M., working with photos, etc. Another possibility is the use of virtual desktop software such as Dexpot, Yodm 3D, or Sysinternals Desktops on Windows systems. Linux systems such as Ubuntu already have that wonderful multi-desktop functionality built in. The wonderful part about virtual desktops is that a single monitor can feel equivalent to a small army of monitors. The ability to separate your open windows into “categories” and spread them out across multiple desktops is definitely nice. With each passing year dual monitor setups are becoming more common. Having twice the screen real-estate visible at the same time can be extremely convenient when you are multi-tasking. Perhaps you like to monitor your system’s stats and an e-mail account on the second monitor while working with software on the first. It certainly beats having windows popping up and down on your screen constantly while keeping on top of everything! Next we have the people who have three or more monitors in use with their computers. This may be a result of the type of work they do, an experiment to see if multiple monitors are right for them, or the cool, geeky factor that comes with having all those monitors. Needless to say these individuals can induce a good amount of envy and/or inspiration in the rest of us when we see their awesome setups. Are you perfectly content with a single monitor? Do you have two or more monitors that you use? If you have two or more monitors are they actually that useful to you? Perhaps you are getting ready even now to add additional monitors to your system. Whatever your situation may be at the moment, let us know your thoughts (and possible multi-monitor plans) in the comments! How-To Geek Polls require Javascript. Please Click Here to View the Poll. Latest Features How-To Geek ETC How to Use the Avira Rescue CD to Clean Your Infected PC The Complete List of iPad Tips, Tricks, and Tutorials Is Your Desktop Printer More Expensive Than Printing Services? 20 OS X Keyboard Shortcuts You Might Not Know HTG Explains: Which Linux File System Should You Choose? HTG Explains: Why Does Photo Paper Improve Print Quality? Hidden Tracks Your Stolen Mac; Free Until End of January Why the Other Checkout Line Always Moves Faster World of Warcraft Theme for Windows 7 Ubuntu Font Family Now Available for Download Oh No! WikiLeaks Published Santa Claus’s Naughty List [Video] Remember the Milk Now Supports HTTPS Encryption for the Entire Session

    Read the article

  • Excel 2007 - "The macro may not be available in this workbook" Error

    - by Psycho Bob
    We use an Excel sheet that has been protected to prevent modification of it from end users. All in all they are only able to edit certain tabs to add information that will then be used to generate information on other tabs using equations and such. On the tab with the equations, a button is present called "Prep for Internal Hard Copy Print." This button runs a macro that selects the information on the tab, unprotects it, then sends a print job to the user's default printer that contains the unprotected content. Normally this works like a champ. This time around, however, the macro is throwing the following error: Cannot run the macro "FILENAME.xlsx'!MacroName'. The macro may not be available in this workbook or all macros may be disabled. As far as I can tell, the macros are still present within the workbook. This sheet is normally a .xlsm though the user saved it with a different filename as a .xlsx. Also, the macros appear only as MacroName in the .xlsm file and not "FILENAME.xlsx'!MacroName' as it does in the .xlsx. Finally, when I open the .xlsm it asks if I want to enable the macro content while the .xlsx does not prompt for this. Can anyone tell me what's going on with this sheet or know of a way that I can get the macros working in the .xlsx without having to start over with a different sheet?

    Read the article

  • problem in fonts type and fonts size on printing

    - by user1400
    hello i have a application on php that i show a report in the table , i want to print this page i can see my page fine in print preview , but when i send thuis page to printer ,the fonts are small and diffrent fonts that i set in css file this is my css file @page { size: A4 landscape; margin-top:2cm; margin-bottom:1cm; margin-left:1cm; margin-right:1cm; } table.print{ text-align:right; border:#999 1px solid; } table.print td.e1{ border-top:#999 1px solid; padding:5px 2px; text-align: right; font-size: 20pt; font-family:"stencil"; } table.print td.e2{ border-top:#999 1px solid; padding:5px 2px; text-align: right; font-size: 120%; font-family:"tahoma"; } thanks

    Read the article

  • Deployed Qt5 Application Doesn't Print or Show Print Dialog

    - by MustacheMcLimey
    I'm experiencing Qt4 to Qt5 troubles. In my application when the user clicks the print button two things should happen, one is that a PDF gets written to disk (which still works fine in the new version, so I know that some of the printing functions are working properly) and the other is that a QPrintDialog should exec() and then send to a connected printer. I see the dialog when I launch from my development machine. The application launches on the deployed machine, but the QPrintDialog never shows and the document never prints. I am including print support. QT += core gui network webkitwidgets widgets printsupport I have been using Process Explorer to see what DLLs the application uses on my development machine, and I believe that everything is present. My application bundle includes: {myAppPath}\MyApp[MyApp.exe, Qt5PrintSupport.dll, ...] {myAppPath}\plugins\printsupport\windowsprintersupport.dll {myAppPath}\plugins\imageformats[ qgif.dll, qico.dll,qjpeg.dll, qmng.dll, qtga.dll, qtiff.dll, qwbmp.dll ] The following is the relevant code snippet: void PrintableForm::printFile() { //Writes the PDF to disk in every environment pdfCopy(); //Paper Copy only works on my dev machine QPrinter paperPrinter; QPrintDialog printDialog(&paperPrinter,this); if( printDialog.exec() == QDialog::Accepted ) { view->print(&paperPrinter); } this->accept(); } My first thought is that the relevant DLLs are not being found come print time, and that means that my application file system is incorrect, but I have not found anything that shows me a different file structure. Am I on the right track or is there something else wrong with this setup?

    Read the article

  • Why can't I source my vimrc after installing vundle?

    - by John N
    I'm trying to get my Vim to update on the fly after editing vimrc. So I followed the instructions at Vimcast which basically source vimrc every time you hit save. But that doesn't work for some reason (when I save my vimrc it doesn't give any errors), so I decided to run source $HOME/.vimrc manually and here's what I got: -bash: Configuration file for vim set nocompatible : command not found -bash: Plugin Management { filetype off : command not found -bash: .vimrc: line 7: syntax error near unexpected token `(' -bash: .vimrc: line 7: ` call vundle#rc()' And here's my Vim info (I'm running Mac OS X 10.7.3): VIM - Vi IMproved 7.3 (2010 Aug 15, compiled Jul 31 2011 19:27:29) Compiled by [email protected] Normal version without GUI. Features included (+) or not (-): -arabic +autocmd -balloon_eval -browse +builtin_terms +byte_offset +cindent -clientserver -clipboard +cmdline_compl +cmdline_hist +cmdline_info +comments -conceal +cryptv +cscope +cursorbind +cursorshape +dialog_con +diff +digraphs -dnd -ebcdic -emacs_tags +eval +ex_extra +extra_search -farsi +file_in_path +find_in_path +float +folding -footer +fork() -gettext -hangul_input +iconv +insert_expand +jumplist -keymap -langmap +libcall +linebreak +lispindent +listcmds +localmap -lua +menu +mksession +modify_fname +mouse -mouseshape -mouse_dec -mouse_gpm -mouse_jsbterm -mouse_netterm -mouse_sysmouse +mouse_xterm +multi_byte +multi_lang -mzscheme +netbeans_intg -osfiletype +path_extra -perl +persistent_undo +postscript +printer -profile -python -python3 +quickfix +reltime -rightleft -ruby +scrollbind +signs +smartindent -sniff +startuptime +statusline -sun_workshop +syntax +tag_binary +tag_old_static -tag_any_white -tcl +terminfo +termresponse +textobjects +title -toolbar +user_commands +vertsplit +virtualedit +visual +visualextra +viminfo +vreplace +wildignore +wildmenu +windows +writebackup -X11 -xfontset -xim -xsmp -xterm_clipboard -xterm_save system vimrc file: "$VIM/vimrc" user vimrc file: "$HOME/.vimrc" user exrc file: "$HOME/.exrc" fall-back for $VIM: "/usr/share/vim" Compilation: gcc -c -I. -D_FORTIFY_SOURCE=0 -Iproto -DHAVE_CONFIG_H -arch i386 -arch x86_64 -g -Os -pipe Linking: gcc -arch i386 -arch x86_64 -o vim -lncurses Could anybody tell me what's wrong here? Thanks so much!

    Read the article

  • WPF UI Automation - AutomationElement.FindFirst fails when there are lots of elements

    - by Orion Edwards
    We've got some automated UI tests for our WPF app (.NET 4); these test use the UI Automation API's. We call AutomationElement.FindFirst to find a target element, and then interact with it. Example (pseudocode): var nameEquals = new PropertyCondition(AutomationElement.NameProperty, "OurAppWindow"); var appWindow = DesktopWindow.FindFirst(TreeScope.Children, nameEquals); // this succeeds var idEquals = new PropertyCondition(AutomationElement.AutomationIdProperty, "ControlId"); var someItem = appWindow.FindFirst(TreeScope.Descendants, idEquals); // this suceeds sometimes, and fails sometimes! The problem is, the appWindow.FindFirst will sometimes fail and return null, even when the element is present. I've written a helper function which walks the UI automation tree manually and prints it out, and the element with the correct ID is present in all cases. It seems to be related to how many other items are also being displayed in the window. If there are no other items then it always succeeds, but when there are many other complex UI elements being displayed alongside it, then the find fails. I can't find any documented element limit mentioned for any of the automation API's - is there some way around this? I'm thinking I might have to write my own implemententation of FindFirst which does the tree walk manually itself... As far as I can tell this should work, because my tree-printer utility function does exactly that, and it's ok, but it seems like this would be unnecessary and slow :-( Any help would be greatly appreciated

    Read the article

  • why my print doesn't work?

    - by udaya
    hi In this below program i am printing the contents of the div when i click the print button i am receiving an alert message printer error not available why it is so <html> <head> <script type="text/javascript" src="http://jqueryjs.googlecode.com/files/jquery-1.3.1.min.js" > </script> <script type="text/javascript"> function PrintElem(elem) { Popup($(elem).text()); } function Popup(data) { var mywindow = window.open('', 'my div', 'height=400,width=600'); mywindow.document.write('<html><head><title>my div</title>'); /*optional stylesheet*/ //mywindow.document.write('<link rel="stylesheet" href="main.css" type="text/css" />'); mywindow.document.write('</head><body >'); mywindow.document.write(data); mywindow.document.write('</body></html>'); mywindow.document.close(); mywindow.print(); return true; } </script> </head> <body> <div id="mydiv"> This will be printed. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Pellentesque a quam at nibh adipiscing interdum. Nulla vitae accumsan ante. </div> <input type="button" value="Print Div" onclick="PrintElem('#mydiv')" /> </body> </html>

    Read the article

  • I want to merge two PostScript Documents, pagewise. How?

    - by Peter Miehle
    hello, i have a tricky question, so i need to describe my problem: i need to print 2-sided booklets (a third of a paper) on normal paper (german A4, but letter is okay also) and cut the paper afterwards. The Pages are in a Postscript Level 2 File (generated by an ancient printer driver, so no chance to patch that, except ps2ps) generated by me with the ancient OS's Printing driver facilities (GpiMove, GpiLine, GpiText etc). I do not want to throw away two-thirds of the paper, so my idea is: Take file one, two and three, merge them (how?) on new double-sided papers by translate/move file two and three by one resp. two thirds and print the resulting new pages. If it helps, I can manage to print one page of the booklet per file. I cannot "speak" postscript natively, but I am capable of parsing and merging and manipulating files programmaticly. Maybe you can hint me to a webpage. I've read through the manuals on adobe's site and followed the links on www.inkguides.com/postscript.asp Maybe there are techniques with PDF that would help? I can translate ps2pdf. Thanks for help Peter Miehle PS: my current solution: i.e. 8 pages: print page 1, 4 and 7 on page one, 2,5,8 on page two and 3,6,blank on page three, cut the paper and restack. But i want to use a electrical cutting machine, which works better with thicker stacks of paper.

    Read the article

  • Mac, PDFKit, PDF/X

    - by PhillipeTKern
    I'm in need of generating and viewing PDF/X-1a. After spending quite some time I came to the conclusion that the only way (hopefully someone will prove me wrong) to achieve this is to use Cocoa. More context: I need to generate PDF/X-1a, that is, all the fonts embeded, spot colors, overprint, ... preferably from Python. But the only libraries which support such things are iText and perhaps and Apache FOP. The first one could be used with Jython, which is ok but not optimal. But then, I simply could not find any viable viewer. Poppler, xpdf, Sumatra, mupdf, ghostscirpt - all of them - just cannot handle large CMYK pdfs, lots of text, ... I really would like to use open sourced libraries but unfortuntatelly the only option I see right now is to buy Mac as I saw one could print (Save-as) to built-in PDF printer under PDF/X conformance and I expect Preview to be comparable, if not better, to Acrobat. But I'm not sure if is it even possible to programmatically access the MacOS libraries responsible for generating PDF? I'm asking because I heard not everything from MacOS is available via public API... (And what Python goes, I thought I could use PyObjC..?) Any others ideas are of course very welcomed!

    Read the article

  • Linux PDF/Postscript Optimizing

    - by Sheldon Ross
    So I have a report system built using Java and iText. PDF templates are created using Scribus. The Java code merges the data into the document using iText. The files are then copied over to a NFS share, and a BASH script prints them. I use acroread to convert them to PS, then lpr the PS. The FOSS application pdftops is horribly inefficient. My main problem is that the PDF's generated using iText/Scribus are very large. And I've recently run into the problem where acroread pukes because it hits 4gb of mem usage on large (300+ pages) documents. (Adobe is painfully slow at updating stuff to 64 bit). Now I can use Adobe reader on Windows, and use the Create Print PDF option or whatever its called, and it greatly( 10x) reduces the size of the PDF(it removes alot of metadata about form fields and such it appears) and produces a PDF that is basically a Print image. My question is does anyone know of a good solution/program for doing something similiar on Linux. Ideally, it would optimize the PDF, reduce size, and reduce PS complexity so the printer could print faster as it takes about 15-20 seconds a page to print right now.

    Read the article

  • An annoying printing issue with Crystal Reports 2008

    - by Xience
    A little background: I have an extremely annoying printing issue with crystal reports. My environment is crystal reports 2008 SP2 on Windows 7 (64bit), Visual studio 2008 and .net framework 3.5 with all the latest updates for everything. The report is designed basically to render a small shelf label of the size (40mm width and 20mm height). In crystal when I set the page size to the above mentioned values and set orientation to portrait and take a preview, everything is displayed as i expect it to be and issuing a print command, it prints absolutely correct. The problem: The problem comes when i print this report from my program (in vb.net), dynamically setting data to some text fields, the result is that crystal somehow changes the print orientation, NOT the paper orientation as in portrait or landscape. Instead of printing from top left towards the bottom right, it rotates the whole output at 90 degrees to the left and reduces everything so small that it is barely visible, although it prints everything out. I have tested it on Intermec PF8t and Zebra GK420d label printers and a whole bunch of laser printers, but with the above stated page settings the output is always the same. Another strange thing that i noticed while experimenting with page sizes if i switch to landscape mode, the print out is correct in its font sizes and positions but then the text gets truncated due to overflowing the page size. Can anyone help me with this. Does crystal has anything like its own print drivers or something. I have tried to ensure to the best of my abilities that it is not a printer driver problem.

    Read the article

  • How to preprocess text to do OCR error correction

    - by eaglefarm
    Here is what I'm trying to accomplish: I need to get a several large text files from a computer that is not networked and has no other output except a printer. I tried printing the text, then scanning the printout with OCR to recover the text on another computer but the OCR gets lots of errors (1 vs l, o vs 0, O vs D, etc). To solve this I am thinking of writing a program to process (annotate?) the text file, before printing it, so that the errors can be corrected from the text output of the OCR program. For example, for 1 (number one) vs l (letter L), I could change the text like this: sample inserting \nnn after characters that are frequently wrong in the OCR results: sampl\108e Then I can write another program to examine the file, looking for \nnn and check the character before the \nnn (where nnn is the ascii code in decimal) and fix it if necessary. Of course the program will have to recognize that the \nnn may have errors too but at least it knows that the nnn are digits and can easily correct them. I think I would add a CRC on each line so that any line that isn't corrected perfectly can be flagged as having a problem. Has anyone done anything like this? If there is an existing way of doing this I'd rather not reinvent the wheel. Or any suggestions for annotation format that would help solve this problem would be helpful too.

    Read the article

  • Trouble with an depreciated constrictor visual basic visual studio 2010

    - by VBPRIML
    My goal is to print labels with barcodes and a date stamp from an entry to a zebra TLP 2844 when the user clicks the ok button/hits enter. i found what i think might be the code for this from zebras site and have been integrating it into my program but part of it is depreciated and i cant quite figure out how to update it. below is what i have so far. The printer is attached via USB and the program will also store the entered numbers in a database but i have that part done. any help would be greatly Appreciated.   Public Class ScanForm      Inherits System.Windows.Forms.Form    Public Const GENERIC_WRITE = &H40000000    Public Const OPEN_EXISTING = 3    Public Const FILE_SHARE_WRITE = &H2      Dim LPTPORT As String    Dim hPort As Integer      Public Declare Function CreateFile Lib "kernel32" Alias "CreateFileA" (ByVal lpFileName As String,                                                                           ByVal dwDesiredAccess As Integer,                                                                           ByVal dwShareMode As Integer, <MarshalAs(UnmanagedType.Struct)> ByRef lpSecurityAttributes As SECURITY_ATTRIBUTES,                                                                           ByVal dwCreationDisposition As Integer, ByVal dwFlagsAndAttributes As Integer,                                                                           ByVal hTemplateFile As Integer) As Integer          Public Declare Function CloseHandle Lib "kernel32" Alias "CloseHandle" (ByVal hObject As Integer) As Integer      Dim retval As Integer           <StructLayout(LayoutKind.Sequential)> Public Structure SECURITY_ATTRIBUTES          Private nLength As Integer        Private lpSecurityDescriptor As Integer        Private bInheritHandle As Integer      End Structure            Private Sub OKButton_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles OKButton.Click          Dim TrNum        Dim TrDate        Dim SA As SECURITY_ATTRIBUTES        Dim outFile As FileStream, hPortP As IntPtr          LPTPORT = "USB001"        TrNum = Me.ScannedBarcodeText.Text()        TrDate = Now()          hPort = CreateFile(LPTPORT, GENERIC_WRITE, FILE_SHARE_WRITE, SA, OPEN_EXISTING, 0, 0)          hPortP = New IntPtr(hPort) 'convert Integer to IntPtr          outFile = New FileStream(hPortP, FileAccess.Write) 'Create FileStream using Handle        Dim fileWriter As New StreamWriter(outFile)          fileWriter.WriteLine(" ")        fileWriter.WriteLine("N")        fileWriter.Write("A50,50,0,4,1,1,N,")        fileWriter.Write(Chr(34))        fileWriter.Write(TrNum) 'prints the tracking number variable        fileWriter.Write(Chr(34))        fileWriter.Write(Chr(13))        fileWriter.Write(Chr(10))        fileWriter.Write("A50,100,0,4,1,1,N,")        fileWriter.Write(Chr(34))        fileWriter.Write(TrDate) 'prints the date variable        fileWriter.Write(Chr(34))        fileWriter.Write(Chr(13))        fileWriter.Write(Chr(10))        fileWriter.WriteLine("P1")        fileWriter.Flush()        fileWriter.Close()        outFile.Close()        retval = CloseHandle(hPort)          'Add entry to database        Using connection As New SqlClient.SqlConnection("Data Source=MNGD-LABS-APP02;Initial Catalog=ScannedDB;Integrated Security=True;Pooling=False;Encrypt=False"), _        cmd As New SqlClient.SqlCommand("INSERT INTO [ScannedDBTable] (TrackingNumber, Date) VALUES (@TrackingNumber, @Date)", connection)            cmd.Parameters.Add("@TrackingNumber", SqlDbType.VarChar, 50).Value = TrNum            cmd.Parameters.Add("@Date", SqlDbType.DateTime, 8).Value = TrDate            connection.Open()            cmd.ExecuteNonQuery()            connection.Close()        End Using          'Prepare data for next entry        ScannedBarcodeText.Clear()        Me.ScannedBarcodeText.Focus()      End Sub

    Read the article

  • Can I print an HTMLLoader (pdf) in Adobe Air?

    - by Stephano
    I'm using AlivePDF to create a PDF file, then save it to the desktop. I can then use an HTMLLoader to display my lovely PDF file. Now, the print button in Adobe Reader works fine. However, there will be young children using the app, so I'd like to have a big "Print" button right above it. I figured I could just start up a print job and feed it my HTMLLoader. Am I doing something wrong here, cause I can't seem to get any output? note: variable "stuff" below is my HTMLLoader. I also have access to the PDF file if that comes in handy. private function print():void { var myPrintJob:PrintJob=new PrintJob(); var result:Boolean=myPrintJob.start(); if (result && stuff != null) { var rect:Rectangle=new Rectangle(0, 0, 2550, 3300); var opt:PrintJobOptions=new PrintJobOptions(true); myPrintJob.addPage(stuff, rect, opt); myPrintJob.send(); } else { //User does not have printer or user canceled print action } }

    Read the article

  • Can I print an HTMLLoader (pdf) in Adobe Air?

    - by Stephano
    I'm using AlivePDF to create a PDF file, then save it to the desktop. I can then use an HTMLLoader to display my lovely PDF file. Now, the print button in Adobe Reader works fine. However, there will be young children using the app, so I'd like to have a big "Print" button right above it. I figured I could just start up a print job and feed it my HTMLLoader. Am I doing something wrong here, cause I can't seem to get any output? note: variable "stuff" below is my HTMLLoader. I also have access to the PDF file if that comes in handy. private function print():void { var myPrintJob:PrintJob=new PrintJob(); var result:Boolean=myPrintJob.start(); if (result && stuff != null) { var rect:Rectangle=new Rectangle(0, 0, 2550, 3300); var opt:PrintJobOptions=new PrintJobOptions(true); myPrintJob.addPage(stuff, rect, opt); myPrintJob.send(); } else { //User does not have printer or user canceled print action } }

    Read the article

< Previous Page | 61 62 63 64 65 66 67 68 69 70  | Next Page >