Search Results

Search found 5670 results on 227 pages for 'zend router'.

Page 65/227 | < Previous Page | 61 62 63 64 65 66 67 68 69 70 71 72  | Next Page >

• Linux router and firewall with IP accounting

  - by Andrew

  I'm working on a project to replace my organisation's aging Slackware gateway/router/firewall machine in our colo rack. Previously we used rc.firewall but we are now looking for something more modern and easily configurable. The requirements are: Act as a gateway router & firewall Port forwarding to a Terminal Server in the colo IP/traffic accounting, preferably accessible via SNMP (already using cacti for other servers) Possibility of acting as a PPTP server & routing these connections Is not an out-of-the-box Cisco product (don't have the finances or support to maintain it) I'd prefer to use Ubuntu or some other Debian-based distro but something that integrates everything we're looking for is certainly an option if it offers all the desired features and is easy to configure. Is there a simple set of packages that will provide me with the Firewall & Accounting features, or am I best served with a custom-built distro / other solution?

  Read the article

• Connect server to router with workstation in between?

  - by letseatfood

  I have a server (9 yr old Dell with Ubuntu 10.04 Server Edition) and a workstation (Laptop with Vista) which are both connected to a router. The workstation is able to access the server via web browser for testing my web development projects. Since the server is old and does not have a wireless card, I am wondering if it is possible to connect the server directly to the workstation while maintaining the ability to connect to the server from the workstation. The reason is that the computers are in a separate room from the router and I am trying to limit the amount of wires on the floor, along with trying to avoid buying more hardware (like a wireless card). Thanks and I will be more than happy to clarify!

  Read the article

• belkin wireless router connection drops for ~60sec every ~15 mins

  - by j j

  Hi, I have a belkin wireless-g router, model F5D7230-4. about every 10-15 minutes, for about 1-1.5 mins I won't be able to browse any web sites. during this period, I usually get replys from "ping google.com". maybe 4/5 times I'll get a reply, 1/5 times i don't. I have changed the router DNS entries from "get DNS server from ISP" to 8.8.8.8, google's DNS and that hasn't fixed the situation. This happens on several computers, running windows7, xp, ubuntu, and a mac, so it is definitely NOT an issue with a computer configuration. any ideas?

  Read the article

• SSH not working after Restoring Running-Config to a Replacement Cisco Router

  - by Kyle Brandt

  One of my Cisco routers died over the weekend, Cisco sent the replacement and I restored the the config using copy tftp: running-config. Everything seems to work fine but I can no longer ssh into the router (I can telnet). The connection is refused, so it isn't listening on port 22 it seems like. I had previously backed up the config by just doing ssh router 'show run' > backup_config from my workstation. So: Is there anything wrong with my method of backup vs copy running-config tftp:? I know I haven't given any debug information, but is there something typical I need to do to get ssh working?

  Read the article

• Port Forwarding on Actiontec GT704-WG Router Issues

  - by adamweeks

  I am trying to setup a server at customer's location that has the Actiontec GT704-WG DSL router. The port forwarding it not working at all. Here's the details: Server: OpenSuse Linux box with a static IP address of 192.168.1.200 Application running accepting connections on port 8060 Firewall disabled Local connections (within the network) working properly Router: Updated to latest firmware available DHCP range set to 192.168.1.69-192.168.1.199 to not have any conflicts with the server Firewall set to "off" Rule set in the "Applications" setting to forward 8060 TCP and UDP to 192.168.1.200 machine (I've tried using the "TCP,UDP" option as well as both individual options) I've also tried just simply putting the server in the DMZ to see if I could connect to anything, but still nothing. Looking for any clues before I call and waste hours explaining the issue to tech support.

  Read the article

• Connecting switch to switch to router

  - by elated

  Hello, Not sure if this is the right place to ask this question. But I have a router which connects to the internet. Now I have a switch connected to this router. I added a lot more computers so I added another switch and connected it to the first switch using a cross-over cable. As soon as I connect it to the first switch, my lights in first switch start blinking like crazy and my entire network simply stops working. The minute I remove the second switch's wire, its all fine again. What could be the problem?

  Read the article

• My D-Link Router is only allowing one connection

  - by Blaze

  My Router (Model: DI-624) is only allowing one wireless connection to one laptop. The other laptop is stuck hanging at connecting to the Internet I have the SSID set as "Pedro-Home" and is using a WPA PSK secured password. I have set the router using "Blaze-PC" while wired. Both Laptops critically need the Internet. > Dynamic DHCP Client List > > Host Name IP Address MAC > Address Expired Time > Blaze-PC 192.168.0.100 70-f1-a1-ff-39-a8 Apr/21/2011 17:49:14 > pedro 192.168.0.105 00-26-82-c8-47-25 Apr/21/2011 17:50:05 <<This computer isn't connecting.

  Read the article

• BGP Router reccomendations for simple redundancy [closed]

  - by Jona

  We have two sites that each have an internet connection and have a dedicated dark fibre between them. Each site has it's own IP space and we have an AS number. We're looking to be resilient to failure of the internet connection to either site and so need to buy a pair of approriate routers. Requirements are: Able to run 2 bgp sessions (one with the ISP, one with the other site router) Option to take a full table from the upstream ISPs would be nice. Able to provide HA gateways on the LAN side (e.g. 192.168.0.254 will automatically migrate if it's host router lost power) A dedicated device rather than a server running Linux / BSD Not crazy expensive. Any help / advice much appreciated.

  Read the article

• Remote desktop from internet to windows 7 box via linksys router

  - by larryq

  Hi everyone, I have a linksys wrt54g router and a windows 7 box at home I'd like to be able to remote desktop into from work. Would it be possible for someone to point me in the right direction on what I need to configure to get this working, both on the router and on the win 7 box? I'm sure there are a lot of little steps involved. Ideally I'd like to set it up so that only my work IP address can get through to the win 7 machine. Thanks very much for any pointers and links!

  Read the article

• Likeliness of obtaining same IP address after restarting a router

  - by ?affael

  My actual objective is to simulate logged IPs of web-site users who are all assumed to use dynamically assigned IPs. There will be two kinds of users: good users who only change IP when the ISP assignes a new one bad users who will restart their router to obtain a new IP So what I would like to understand is what assignment mechanics are usually at work here deciding from what pool of IPs one is chosen and whether the probability is uniformly distributed. I know there is no definite and global answer as this process can be adjusted be the ISP but maybe there is something like a technological frame and common process that allows some plausible assumptions. UPDATE: A bad user will restart the router as often as possible if necessary. So here the central question is how many IP changes on average are necessary to end up with a previously used IP.

  Read the article

• Ubuntu based VPN server behind NAT router?

  - by maartenn88

  I have a small intranet- and file-server inside our company, which can only be reached from inside our own network. I'd like to be able to reach the intranet and files on the server from outside the network, however I don't really like the idea of completely opening security by forwarding the ports on our NAT-router, so I'd prefer to enable a VPN possibility for this. So I have a router, which is the DHCP server and has NAT function, and I have an Ubuntu Server with the files and intranet on it. How do I configure these two so that I can make a VPN connection with my network in order to reach the server? thanks in advance for any answer!

  Read the article

• Windows 7 Won't connect to Wireless Router too far away (but still have 3 bars)

  - by Kerry

  I have found this problem a couple of times. Windows 7 with Intel AGN 5100 won't connect to a WPA2-PSK router when it's too far away. Both times I've had this happen I was in a foreign country (London and Stockholm), and both times I was upstairs while the router was downstairs. Now, it still has 2-3 bars when looking at local WiFi, but I get the "will not connect" error, and debugging doesn't help at all (it doesn't know what's wrong). I went downstairs and it connected immediately (but I need to be able to have it upstairs). My Android Cell Phone and iPad were able to connect upstairs just fine. Any suggestions?

  Read the article

• Computer Loses connection to router

  - by ajon

  I have a new Windows 8 Dell XPS desktop computer at work. It has a Dell Wireless 1703 802.11 b/g/n (2.4ghz) wireless adapter. sporadically throughout the day I lose internet connectivity. When I click on the wireless system tray icon, my companies router does not appear in the list. No other computer on the network is losing connection, only this one. I don't even know what to check. Could it be an ip conflict that causes me to get booted off? (I use DHCP), but why wouldn't my computer be able to see the network. The next time it happens I will see what happens when I try to access the router directly.

  Read the article

• Set Up Port-Forwarding on Netgear N300 Router

  - by Smitty

  I have a Netgear N300 router that has DynDNS.org as a preset DDNS option. After setting it up it (unsurprisingly) sent traffic directly to my router. I'm essentially using this to connect remotely to my home (virtual) machine/s. From what I've read, it seems like I need to set up port forwarding. I tried forwarding "all" inbound traffic to a specific IP but that just didn't work. What am I doing wrong? Also, I just noticed I get this error after applying the settings: "The specified port(s) are being used by other configurations. Please check your configurations of Remote Management, Port forwarding, Port Triggering, UPnP Port Mapping table, RIP, and Internet connection type"

  Read the article

• Ping reply not getting to LAN machines but getting in Linux router Gateway

  - by Kevin Parker

  I have configured Ubuntu 12.04 as Gateway machine.its having two interfaces eth0 with ip 192.168.122.39(Static) and eth1 connected to modem with ip address 192.168.2.3(through DHCP). ip-forwarding is enabled in router box. Client machine is configured as: ip address 192.168.122.5 and gateway 192.168.122.39 Client machines can ping router box(192.168.122.39).but when pinged 8.8.8.8 reply is not reaching Client machines but in the tcpdump output on gateway i can see echo request for 8.8.8.8 but never echo reply.Is this because of 122.5 not forwarding request to 2.0 network.Can u please help me in fixing this.

  Read the article

• Windows Server 2003 Router, Good approach [closed]

  - by jM2.me

  Possible Duplicate: Windows Server 2003 Router with PortForwarding Situation We have Verizon Fios 25/25 Internet Connection, Server acting as a router, and around 12 office computers. Task Portforward port 29000 from office computer. Problem Once I connected wan and lan cables I just had to set static lan ip (on server) and plug in switch with office computers into second nic. Then just right click on wan nic and select share internet connection. All office computers were assigned with an IP address 192.168.0.XXX and Gateway 192.168.0.1 (server). Now I have to open port and portfoward it from computer 192.168.0.190 (static ip, manual). Using this guide http://www.rosscode.com/blog/index.php?title=port_forwarding_in_windows_2003&more=1&c=1&tb=1&pb=1 I faced a problem. Before enabling "RRA" I had to unshare internet connection (wan interface) and was able to setup network. Now how do I setup a network within "RRA" and share internet with private network? Thank you much

  Read the article

• how to communicate in typical router switch router scenario?

  - by Kossel

  I'm learning routing using packet tracer simulation and I think this is a very commun scenario: let's say pc4 is the server... why I can't ping from PC1 to 192.168.2.253 (router1) but I can ping 192.168.2.2 (pc0) aren't they the same subnet? what am I missing or have to do in order to reach pc4? (192.168.100.254) from pc 1 (192.168.1.1) is there something like "default gateway" for router? thanks for advice PS: during the simulation it shows error "The routing table does not have a route to the destination IP address. The router drops the packe (from 192.168.2.253 to 192.168.1.1)"

  Read the article

• pfSense router gives DNS rebinding warning when accessing subdomains

  - by Richard Maddis

  I have just set up a router running pfSense on our network and forwarded the appropriate ports. I have a small web server running in my network, and a domain name pointing to our (WAN) IP. When accessing that domain name, everything works fine. However, when accessing a subdomain of the domain name, pfSense will give a DNS rebinding warning. This did not happen back when I used a DD-WRT router. What is the proper way to fix this? The DNS records for the subdomain also point to the same address (I use a virtual server to differentiate the subdomains.)

  Read the article

• How can I tell if a host is bridged and acting as a router

  - by makerofthings7

  I would like to scan my DMZ for hosts that are bridged between subnets and have routing enabled. Since I have everything from VMWare servers, to load balancers on the DMZ I'm unsure if every host is configured correctly. What IP, ICMP, or SNMP (etc) tricks can I use to poll the hosts and determine if the host is acting as a router? I'm assuming this test would presume I know the target IP, but in a large network with many subnets, I'd have to test many different combinations of networks and see if I get success. Here is one example (ping): For each IP in the DMZ, arp for the host MAC Send a ICMP reply message to that host directed at an online host on each subnet I think that there is a more optimal way to get the information, namely from within ICMP/IP itself, but I'm not sure what low level bits to look for. I would also be interested if it's possible to determine the "router" status without knowing the subnets that the host may be connected to. This would be useful to know when improving our security posture.

  Read the article

• Windows 7 cannot connect wirelessly to Netgear Router WPN824 V2

  - by edo152

  I have a new HP Laptop running Win 7 Home Premium with an Atheros Wireless card. I have a Negear WPN824 V2 Rangemax Router. The router works with a wired connection. Wirelessly it can see the network but it cannot connect. I have searched the web and the WPN824 seems to work for some people, but I cannot get it to connect. I have tried disabling Bonjour Service and a few other things but it continues not to connect. Am I probably correct to assume that the WPN824 is somehow incompatible with Wiondows 7? or am I missing some simple change I should make?

  Read the article

• Cannot Access Server from External IP (Router)

  - by mindoftea

  We have an Ubuntu 10.04 LAMP server running on site (Apache is on port 80). It is running fine through the LAN, but I cannot access it using its external IP address through the Netopia 3000 Series modem by which it is connected to the internet. I have tried using what Netopia calls "Pinholes" (Port Forwarding) to make the server accessible, but a telnet to the external address just gives me "connect to address x.x.x.x: Operation timed out." I have also tried enabling "Services" and "IP Passthrough" on the router, but it gives the same result as above. How can I enable the server to be accessed through its external IP address? Because it connects fine locally, it would seem to be a problem with the Netopia router. Update: Booting the server in GUI mode instead of text mode solved the problem instantly. Any ideas why?

  Read the article

• Can a Cisco 3550 be used as router?

  - by kubiej21

  I'm not sure if this is the correct place to ask such a question, but I'll give it a shot anyway. If it isn't, let me know, and I'll remove this post. Anyway, very recently I picked up a Cisco 3550 just to play around with networking and to familiarize myself with Cisco's command line configuration due to the fact that I will be working an electrical engineering internship in which I will have to deal with various networking issues (yes, I agree that a CSNA would be much better suited for this task, but since its part of the job requirements, I'm willing to learn about it). What I was wondering, is whether or not my 3550 can act as a router. I know its a L3 switch, but does that mean it can take the place of a router?

  Read the article

• Zend Framework/PHPUnit: How to Stub/Mock an object method that connects to a database?

  - by Andrew

  In my Zend Framework project, I have a form that I am testing. In my form, a multi-select element gets its options from a model, which gets the data from the database. public function init() { $this->addElement('select', 'Region_ID', array('multiOptions' => $this->getRegions())); } protected function getRegions() { $mapper = new Model_RegionMapper(); return $mapper->getFormSelectData(); //this method will try to connect to a database (or get another object that will connect to the database) } I tried copying the example in the PHPUnit documentation, but it doesn't seem to be working. public function setUp() { $stub = $this->getMock('Model_RegionMapper'); $stub->expects($this->any()) ->method('getFormSelectData') ->will($this->returnValue(array('testdata'))); } public function testFoo() { //this will fail $form = new My_Form(); } The test fails because it is trying to find a table in the database that doesn't exist. But I don't want it to connect to the database at all. How do I correctly stub/mock this method so that it doesn't call the database?

  Read the article

• zend-framework doctrine, and mvc pattern: what should connect data between models and forms?

  - by Skirmantas

  I am learning Zend Framework and Doctrine. I am wondering what is the best practice to connect forms to models and vice versa. I don't know where I should put my code. I have seen in Zendcast video tutorials where author creates methods like mapFormToRecord and mapRecordToForm in form class. Well I guess it is very handy when form is sophisticated and uses many records. Is it a good practice? I somehow believe that form-class should not need to know about data-records. And sometimes we might have model which is used in many forms. So It would be handy to have few functions in that model which would help to prepare data for forms. For example to give an array of id=name pairs so that it might be used in Zend_Form_Element_Select. However I would like to have a consistency. So I don't want to put this code nor in model nor in form because on different situations I act different. So only controller is what is left to deal it. However this will result in code duplication if one form will be used more than in one controller. Moreover controller gets bloated if form is not from the simple ones. Or maybe there is a consistent pattern in those data conversions between forms and models? I think that there is. At least in my simple cases. So maybe a separate class could be a solution? Where should I put such class and how should I name it? Another question: Zend_Form has validators and filter. Doctrine has validators and filters too. Which do we use and when? What is your way of dealing the connections between forms and models? (Sorry if it was hard for you to read my text. I don't have enough knowledge of English language to express myself freely)

  Read the article

• How to set up site specific configuration vs application configuration in Zend Framework?

  - by rbruhn

  Being fairly new to Zend Framework, I've been reading and trying out various tutorials on the web and books I've purchased. One thing all the tutorials do is hard code certain values into into the bootstrap or other code. For example, setting the title: $this-_view-headTitle('MySite'); I realize this can be set in the application.ini file, but I don't think that is appropriate either if you are distributing the application to other sites. I would be interested in hearing ideas where application specific settings are set in the application.ini file and loaded: $application = new Zend_Application( APPLICATION_ENV, APPLICATION_PATH.'/configs/application.ini' ); Then somewhere in the bootstrap, checking for a config.ini file and adding these to currently existing application config array, and if config.ini does not exist, retrieving such site specific configs from a database and writing the config.ini file (Obviously the file deleted and rewritten if a value is changed in the database). I don't need to see how the file is written or what not... just a general idea of how others are handling such things. Or provide different ideas of doing this? I would rather end up using something like this when setting various site specific configurations: $this->_view->headTitle($config->site->title); Hope this makes sense :-)

  Read the article

< Previous Page | 61 62 63 64 65 66 67 68 69 70 71 72  | Next Page >