Search Results

Search found 21331 results on 854 pages for 'require once'.

Page 651/854 | < Previous Page | 647 648 649 650 651 652 653 654 655 656 657 658  | Next Page >

• Nvidia 9800GT randomly prevents computer from booting

  - by Blender

  My computer has been running Windows and Linux perfectly fine with my 9800GT for the past year or so, but today it refused to boot. When I press the power button, this is what happens: Power button flashes once. Fans whir. Graphics card makes clicking noise. Computer reboots. Go back to 1. The cycle just keeps going, and I have to yank the cord to make the computer stop. After about 30 attempts at booting it, the computer powers on and everything works. I'm pretty sure that the graphics card isn't malfunctioning, as I've been GPU computing on it for a while now without any hiccups. But the strange thing is, the computer boots perfectly fine in only 5 boots if I remove the card. The computer is a HP Pavilion a6028x Desktop PC: Processor: AMD Athlon 64 X2 (W) 4600+ 2.4 GHz (AM2 socket) Motherboard: ECS MCP61PM-HM (Nettle 1) RAM: 3GB DDR2 (two different brands) More specs here Does anybody know what could be the problem? Any help or information would be greatly appreciated!

  Read the article

• How to fix "The connection was restarted"?

  - by Altar

  I have a php script with ajax. Few days ago, without making any changes, the script stopped working. The script is working sometimes but it is very slow. Other times it doesn't load completely. Yet other times it loads and empty page or it shows a "The connection was restarted" message. We have tried loading the page from 4 different computers in two different countries (two different ISPs). There is nothing relevant in the server's log. We contacted iPage.com hosting support. We sent screenshots. And all we manage to get from them was an incomplete screenshot and the message 'We tested. The page loads'. So, they won't admit the fault. It looks like they loaded the page once and declared it is working and went back to playing solitaire. I know their support. We had all kind of problems with iPage hosting. My questions are: 1. There is any way to make this error more easy to reproduce? I mean instead of fixing the error to get it appear more often. 2. There is any way to test a server response, to see if it drops connections?

  Read the article

• Shrinking windows and recovery partitions on the samsung new series 9

  - by bobbaluba

  I just bought a samsung NP900X3C, and as I was going to install linux, I noticed the windows partitions and recovery partitions occupied a major portion of the disk. The disk is a 128 GB SSD, and I want to keep the windows partition in order to play some games once in a while, but the windows disk is already 45GB full (with no installed programs) and the recovery partition is 20GB. That leaves under 60 GB for linux, which is not optimal, since that is what I'm going to be using most of the time, and there would be no room for games on the windows partition. There are also two small partitions that I don't know what are doing, one 100mb at the start of the disk that I'm guessing is some kind of boot partition, and one 5GB, that is described as an OS/2 hidden C: drive What I'm wondering is: can i delete the recovery partition? What about the mystical 5gb partition? Here is what fdisk reports: ubuntu@ubuntu:~$ sudo fdisk -l Disk /dev/sda: 128.0 GB, 128035676160 bytes 255 heads, 63 sectors/track, 15566 cylinders, total 250069680 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x83953ffc Device Boot Start End Blocks Id System /dev/sda1 * 2048 206847 102400 7 HPFS/NTFS/exFAT /dev/sda2 206848 198273023 99033088 7 HPFS/NTFS/exFAT /dev/sda3 198273024 207276031 4501504 84 OS/2 hidden C: drive /dev/sda4 207276032 250068991 21396480 27 Hidden NTFS WinRE

  Read the article

• Hard Reset USB in Ubuntu 10.04

  - by Cory

  I have a USB device (a modem) that is really finicky. Sometimes it works fine, but other times it refuses to connect. The only solution I have found to fix it once it gets into a bad state is to physically unplug the device and plug it back in. However, I don't always have physical access to the machine it is plugged in on, so I'm looking for a way to do this through the command line. This post suggests running: $ sudo modprobe -w -r usb_storage; sudo modprobe usb_storage However I get an "unknown option -w" output. This slightly modified command: $ sudo modprobe -r usb_storage Fails with the message FATAL: Module usb_storage is in use. If I try to kill -9 the processes marked [usb-storage] before running they refuse to die (I think because they are deeply tied to the kernel). Anyone know of a way to do this? NOTE: I cross-posted this on serverfault as I didn't know which was more appropriate. I will delete and/or link whichever one is answered first.

  Read the article

• SSO to multiple websites from Sharepoint website

  - by Aico

  We have an intranet based on Sharepoint 2010. In this intranet we have several links to other webservers within the same Active Directory, for example a link to our Outlook Web Access site on our Exchange 2010 environment. We have three different setups which visit this Sharepoint environment and the other webservers: Windows 7 clients that are a member of the Active Directory Home pc's that connect through a SSL VPN appliance Standalone thin clients (Windows 7 embedded) within the corporate network The goal is to let people only sign in once. In the first group this isn't a problem because the AD Integrated Authentication works fine and the Windows logon is passed on to Sharepoint and the other webservers. The second group is also working fine because of the LDAP integration that the SSL VPN appliance uses. The third group is however experiencing issues. They need to enter their credentials everytime they click a link to another webserver. They first need to enter credentials for accessing the Sharepoint environment. When clicking the link for their webmail they have to re-enter their credentials, and so on. Can someone tell me what the best solution would be to also get SSO working fine for the third group? Some extra information: We also have a Forefront TMG server in our environment. I read somewhere that Forefront might be part of a solution for this problem, but not sure how. Maybe someone here can help me? Look forward to some help. Best regards, Aico

  Read the article

• Online FTP or file sharing service [on hold]

  - by Frede

  We need to share large files with clients, e.g. clients upload a large file, we modify it and later make it available for download. Up until now we've used FTP but this has a number of drawbacks. A lot of management of files and setting up accounts etc. We are therefore considering online alternatives. Requirements: Cheap, 8-) Easy to use, ideally just requiring a web browser, but also possible for power users to connect e.g. via FTPS/SFTP No registration requried for users to upload/download files. We ourselves of course need to be able to login an view uploaded files and upload new files. No per user fee High bandwidth. As files may be GBs in size both upload and download speed cannot be too slow Secure. Encryption during upload/download. No way for users to access uploaded files. Once a user has uploaded a file they (or anyone else besides us) should be able to access the file. To download files users get a link with a password. Ideally the link expires after a set time. No software installation We do NOT need any sync features, backup, versioning etc. Just a quick, easy, secure way for us to share files with our clients. Services like JustCloud, DriveHQ etc seems bloated and "too much" for what we need. What other alternatives exist? Thanks!

  Read the article

• Web Server slows down (ASP.NET)

  - by mfeingold

  below is a question I posted on stackoverflow . as suggested by Martin Clarke I also post it here. We have a really strange problem. One of the servers in the server farm becomes really slow. We see a number of timeouts in the logs and overall response time is not where it should be (and is on other servers in the farm). What is also strange is that it is not just the web app - Just logging into the server takes up to 1.5 min to show you the desktop. Once you are in, the system is as responsive as ever - unless you try to launch something, i.e. notepad - it takes another minute to launch and after launch it works fine. I checked a number of things - memory utilization is reasonable, CPU is below 15%, windows handles, event logs do not show anything. Recycling the aps.net process does not fix it - it still takes over a minute to log in. Rebooting the server helped, but now it started to slow down again. After a closer look we found out that Windows Temp directory is full of temp files - over 65k files. This is certainly something to take care of. But my question is could it be the root cause of the sluggishness, or there is still something else lurking in the shadows? Edit After more digging I am zeroing in on the issue related to the size of temp directories. This article: (see the original post this thing will not let me include a second link) describes something very similar. It still does not answer the question why the server is still slow even there is no activity.

  Read the article

• Invisible Apache redirect

  - by Guilhem Soulas

  I would like subdomain.mydomain.com to invisibly redirect to https://[myServerIP]:2083. (There is an SSL issue here). So far I managed to do it, but the redirection is visible and I don't want it: RewriteCond %{HTTPS} off RewriteCond %{HTTP_HOST} ^subdomain.\.mydomain\.com$ RewriteRule ^ https://[myServerIP]:2083/ Would it be a way to achieve the same redirection while maintaining permanently my beautiful "subdomain.mydomain.com" in the address bar? EDIT with the ProxyPass directive: I tried some variations with ProxyPass but it will still change the URL in the address bar: ServerName subdomain.mydomain.com <Location /> ProxyPass https://[myServerIP]:2083/ ProxyPassReverse https://[myServerIP]:2083/ </Location> RewriteCond %{HTTPS} off RewriteCond %{HTTP_HOST} ^subdomain\.mydomain\.com$ RewriteRule ^ https://[myServerIP]:2083/ EDIT2: It still doesn't work: #non SSL ServerName subdomain.mydomain.com #SSL! <Location /> ProxyPass https://[myServerIP]:2083/ ProxyPassReverse https://[myServerIP]:2083/ </Location> EDIT3: It now works using the SSLProxyEngine directive: SSLProxyEngine on ServerName subdomain.mydomain.com <Location /> ProxyPass https://[myServerIP]:2083/ ProxyPassReverse https://[myServerIP]:2083/ </Location> I can now access my login interface (cPanel). However, once I'm logged in it doesn't redirect to the next page subdomain.mydomain.com/cpsess5850710203/.

  Read the article

• How do you get linux to honor setuid directories?

  - by Takigama

  Some time ago while in a conversation in IRC, one user in a channel I was in suggested someone setuid a directory in order for it to inherit the userid on files to solve a problem someone else was having. At the time I spoke up and said "linux doesn't support setuid directories". After that, the person giving the advice showed me a pastebin (http://codepad.org/4In62f13) of his system honouring the setuid permission set on a directory. Just to explain, when i say "linux doesnt support setuid directories" what I mean is that you can go "chmod u+s directory" and it will set the bit on the directory. However, linux (as i understood it) ignores this bit (on directories). Try as I might, I just cant quite replicate that pastebin. Someone suggested to me once that it might be possible to emulate the behaviour with selinux - and playing around with rules, its possible to force a uid on a file, but not from a setuid directory permission (that I can see). Reading around on the internet has been fairly uninformative - most places claim "no, setuid on directories does not work with linux" with the occasional "it can be done under specific circumstances" (such as this: http://arstechnica.com/etc/linux/2003/linux.ars-12032003.html) I dont remember who the original person was, but the original system was a debian 6 system, and the filesystem it was running was xfs mounted with "default,acl". I've tried replicating that, but no luck so far (tried so far with various versions of debian, ubuntu, fedora and centos) Can anyone clue me in on what or how you get a system to honor setuid on a directory?

  Read the article

• Executing a git command using remote powershell results in a NativeCommmandError

  - by user204777

  I am getting an error while executing a remote PowerShell script. From my local machine I am running a PowerShell script that uses Invoke-Command to cd into a directory on a remote Amazon Windows Server instance, and a subsequent Invoke-Command to execute script that lives on that server instance. The script on the server is trying to git clone a repository from GitHub. I can successfully do things in the server script like "ls" or even "git --version". However git clone, git pull, etc. result in the following error: Cloning into 'MyRepo'... + CategoryInfo : NotSpecified: (Cloning into 'MyRepo'...:String) [], RemoteException + FullyQualifiedErrorId : NativeCommandError This is my first time using PowerShell or a Windows Server. Can anyone provide some direction on this problem. The client script: $s = new-pssession -computername $server -credential $user invoke-command -session $s -scriptblock { cd C:\Repos; ls } invoke-command -session $s -scriptblock { param ($repo, $branch) & '.\clone.ps1' -repository $repo -branch $branch} -ArgumentList $repository, $branch exit-pssession The server script: param([string]$repository = "repository", [string]$branch = "branch") git --version start-process -FilePath git -ArgumentList ("clone", "-b $branch https://github.com/MyGithub/$repository.git") -Wait I've changed the server script to use start process and it is no longer throwing the exception. It creates the new repository directory and the .git directory but doesn't write any of the files from the github repository. This smells like a permissions issue. Once again invoking the script manually (remote desktop into the amazon box and execute it from powershell) works like a charm.

  Read the article

• rsync --remove-source-files but only those that match a pattern

  - by user28146

  Is this possible with rsync? Transfer everything from src:path/to/dir to dest:/path/to/other/dir and delete some of the source files in src:path/to/dir that match a pattern (or size limit) but keep all other files. I couldn't find a way to limit --remove-source-files with a regexp or size limit. Update1 (clarification): I'd like all files in src:path/to/dir to be copied to dest:/path/to/other/dir. Once this is done, I'd like to have some files (those that match a regexp or size limit) in src:path/to/dir deleted but don't want to have anything deleted in dest:/path/to/other/dir. Update2 (more clarification): Unfortunately, I can't simply rsync everything and then manually delete the files matching my regexp from src:. The files to be deleted are continuously created. So let's say there are N files of the type I'd like to delete after the transfer in src: when rsync starts. By the time rsync finishes there will be N+M such files there. If I now delete them manually, I'll lose the M files that were created while rsync was running. Hence I'd like to have a solution that guarantees that the only files deleted from src: are those known to be successfully copied over to dest:. I could fetch a file list from dest: after the rsync is complete, and compare that list of files with what I have in src:, and then do the removal manually. But I was wondering if rsync can do this by itself.

  Read the article

• Windows 7 "freezes" (chills?), and then "unfreezes" for about 1 minute.

  - by gbc001

  Hi, I have an Acer Timeline 1810T netbook (4GB RAM) with Windows 7 x64. About once or twice a day, it "freezes" - the reason i put this in quotation marks is that it does not really freeze, as in you cant move mouse, etc. I can move my mouse and jump between different applications, but I cant use the applications for anything. So I can jump between notepad and Firefox, but I cant browse to a new web page. I have been trying to determine the source of this misery for a while now, and I suspect it has something to do with the hard drive - indirectly if not directly. Here are some screen shots of the resource monitor during a "freeze" and during normal operation: Freeze: http://imgur.com/Gcgq1.jpg Normal operation: imgur.com/mlHaI.jpg As you can see, CPU is fine during freeze, but the disk is going bananas.. Does anyone have an idea of what these reading mean, or about the problem in general? There seems to be no specific activity that sets this off - it can be during browsing, or during media playback with nothing else open. Very appreciative of any help!

  Read the article

• Windows 8 Killed my SSDs

  - by SLaks

  I have a computer running 2 256GB Crucial M4's (CT256M4SSD2) in a RAID 0 (striped) array on an ASUS P9X79 Pro using Intel's (built-in) RAID system. I recently installed Windows 8 Pro as UEFI on this RAID array. (wiping a fully-function Windows 7 non-UEFI installation) Now, whenever the computer is left running for about an hour, the system no longer sees those drives. Since those drives contain Windows, this leads to various forms of BSODs. If I Intel RSTe (RAID manager) is running at the time, it will say that the disk backing that RAID array has been removed. Once this happens, if I reset the computer, it will no longer boot. Entering BIOS setup shows that the SATA 3 (6Gbps) ports that those disks are connected to are both empty. If I then power down the system completely, then turn it on again, the drives reappear, but the problem repeats after another hour or so. I have inconclusively determined that the problem occurs even if Windows is not running (booted into the installation environment from a UEFI flash drive) I don't think there has been any data corruption since this started happening, although I have had two strange issues with a GIT repo on that disk. sfc /ScanNow and Intel's disk check (in RSTe) both do not find anything. Does anyone know what might cause this?

  Read the article

• What is the best time to set the IP address for a server headed to a server colocation facility?

  - by jim_m_somewhere

  What is the best time to set the IP address for a server? I have a server that I am going to install the OS on and then I am going to send it to a server colocation facility. The server is going to have Internet facing services (www, email, etc.) I can set up a "fake" IP address during install (by fake I mean private as in RFC 1918) and change the "fake" IPs to the real IPs once I set up the colocation service. The other option is to set up the colocation service...wait for them to give me the "real" IPs and use them during the OS install. The ramification are that...if I use "fake" IPs during install...I will have to wait before I set up things like SSL certs. If I wait for IPs from the colocation provider...then I can set up SSL certs that use the "correct" (as in "real") IP addresses...no changes to the certs until they expire. Do the "gotchas" of changing an IP address on a server outweigh the benefits of a quick install? The other danger with using "fake" IPs is that I could make a mistake when I go through the various files to change the IP address to the "live" IP address. Server OS: CentOS 6.2 or CentOS 6.3, 64 bit. Apps: Apache 2.4.X httpd, MySQL 5.X (will eventually use replication)

  Read the article

• PCI-E riser card prevents server from starting at all

  - by user68623

  I need to replace the RAID controller in a server, and the new one is PCI Express while the old one was 64bit PCI. The server has both slots, but the riser card that was installed does not contain the PCI Express part. So I bought a new 4x PCI Express riser card (Delock 89103), but the moment I put it into the slot the server does not start up at all. It does not even get to POST, at most the power LED flashed once but nothing else happens at all. It does not power up the server at all. If I remove the riser card it starts up fine. If I put the riser card into a regular desktop computer it seems to work in general. Is there anything else I have to pay attention to when buying a riser card? My naive assumption would be that any PCI Express riser card should work. Or is my riser card likely to be damaged or out-of-spec and the server is just more picky? How do I get it to work, or how can I at least find a riser card that will work with my server? The server mainboard is a Super Micro PDSMi+.

  Read the article

• Problems with Program startup in WIn 7 this week

  - by PyNEwbie

  I have a program (ISYS) that I have been using since 2006. It migrated successfully to Windows 7. Just yesterday it started manifesting this strange behavior. The program has a selector to allow you to select a directory that might have relevant files for the program. As of yesterday the program will only let me select folders on the C drive. For example I have a folder on D that I need to access with this program - from the GUI when I select the D drive the directory list does not load, instead it churns away using 17% of the CPU cycles. I have let it run for an hour several times. I have found that I can get the directory I want by using a batch file to start the program but this limits my ability to do certain things I really need to use the GUI. I did a number of reboots and other tests - I disconnected drives but once I try to select some directory on a drive other than C it churns away. I have experimented quite a bit and am convinced (which means I am wrong) that this has something to do with some setting change on my computer that I can't figure out as I don't see any updates. Since ISYS has not been updated I feel confident it is something internal. Any suggestions would be appreciated.

  Read the article

• What is wrong with my home network? (Routing and connection issues)

  - by David

  I have a corporate laptop that was provided to me by a client and I'm having some rather odd difficulties with it when I put the laptop on my home network. When I first brought the machine home it behaved like any other laptop. Once it was connected to the network it was assigned an IP address and I could remote into it just fine using the machine name. Lately though, whenever I put this laptop on my network I am not able to ping or RDP into the machine as the host name doesn't properly resolve. Additionally I'm able to see the device and it's assigned IP address clearly in my router firmware. This gets even more strange as now when I try to ping it's IP address listed in my router, I see that it's actually trying to ping my own machine (screenshot of this very odd event below). This has actually driven me crazy to the point that I have actually replaced my router (it was behaving oddly in other ways), and I'm continuing to have these problems. The above ping capture is from the new router. As far as network goes I am now currently using an NetGear R7000 Nighthawk and I haven't customized any of the networking settings in the router just yet (installed yesterday). I would appreciate any advice possible and would be happy to provide further diagnostic information. Networking isn't my strong suit, so I'm not even sure where to begin unraveling this thing.

  Read the article

• Hourly SQL Server 2005 Slowness (Possibly caused by SYSTEM)

  - by Zorlack

  We're trying to diagnose the cause of slowness on our Database server. We're running the latest rev SQL Server 2005 on Windows 2008x64. The behavior that we're seeing is this: We see the SYSTEM process spike one of the CPUs for about 2 minutes, during this time SQL server slows down by a factor of 10. The slowness lasts until SYSTEM is done, then in an hour everything starts again. During these slowdowns disk writes don't spike, paging doesn't spike, the only noticeable precursor we see is that SYSTEM maxes out one of the sixteen (HT)CPUs. Note that this doesn't happen at the top of the hour, it just happens once an hour, and it shifts a bit depending on the length of the incident. At the moment this is causing intermittent slowdowns, but when the server is really busy it can cause Worker Thread starvation. The server is a Dual Quad Dell R710 with 96GB of RAM and RAID10 data/log disks. Has anyone experienced this kind of problem? Does anyone know where we should look? Edit: SQL Server Version is 9.0.4035

  Read the article

• How to diagnose computer freezing problem

  - by reinierpost

  I have a laptop (a Medion from Aldi) that tends to hang quite often - so often, in fact, that several attempts to install Windows XP or Ubuntu on it have all failed. However, I am able to boot and run Ubuntu as found on the standard Ubuntu 10.10 installation image. I have done this two times thus far. The first time everything was running smoothly, until at some point the GUI (i.e. X) became unresponsive. The cursor kept moving with the mouse, but menus would no longer show and clicking things no longer produced any response. So I switched to the consoles (Ctrl-F1, Ctrl-F2, etc., which in this setup automatically run shells. The shells were still responsive, and the cd command would still work, but any command that invoked an executable (e.g. /bin/ls or cd /bin; ./find caused the shell to hang up uninterruptibly. My hypothesis was that all attempts at disk access were hanging up, but I didn't actually try a command like echo /proc/$$ or while read line; do echo $line; done < /var/log/syslog to verify this. Another possibility is that an essential system library is cached in memory and somehow failing to function properly. The second time I left the system running overnight and it didn't hang itself spontaneously. I'm not sure I have the patience to just twiddle with the running system until the condition reappears, and I'm, not sure what to do once it does. Clearly we can rule out a software cause. It seems disk access related, but clearly it's not permanent hard disk failure because the system will reboot just fine. What kind of hardware problem might produce these symptoms? Can it be a memory problem?

  Read the article

• Installing Debian 7.6.0 on Lenovo Y50

  - by Girauder

  I was trying to install Debian on my new laptop: a Lenovo Y50 64bit running Windows 8. I got together with a friend and installed Debian in his computer first and had no problems. However I've tried to install Debian several times using the AMD64 KDE and netinst versions and accomplished nothing. First try: installed the KDE version. Grub would let me choose which operating system I wanted, but when I selected Debian it would only load the command line. Second try: Reinstalled but this time with the netinst version. I only got a black screen where I could type but nothing else. Third Try. Tried the netinst again. This time after making the partitions I got a message that said that no EFI partition was found. I ignored the message and this time it wouldn't even load Grub. only a command like interface with grub rescue or something. Not once did I get an error during the installation. What am I doing wrong? I assume the problem is I need to make an EFI partition or something like that. So why is it that during the first installations I didn't ask me for that. And if that is indeed the problem, How can I solve it? Update So the installation failed again... as predicted. Here you can find the Disk Management picture. http://postimg.org/image/433cpfkjz/ Please somebody help me. I keep getting the grub rescue thing. secure boot is disabled and legacy support is set first.

  Read the article

• Fixing bent pins on a CPU

  - by Pekka

  While replacing a mainboard in a desktop machine (see related question), I did something stupid. I inserted the CPU into the new mainboard, but didn't check for the right position. When it didn't immediately lock in, I pressed slightly before realizing what was wrong. The result was a number of bent pins. I tried every tutorial that popped up when Googling "CPU bent pins" - using credit cards, sewing needles, and a hunting knife to get the pins back into position - but to no avail: For every pin I get straightened out, two others are bent. I have no problem getting individual pins straightened out, but my many attempts have led to many pins being slightly askew - enough for the CPU not to fit into the socket (An AMD X3 one). Maybe I just lack the motoric finesse. What I would need is some sort of a grid to fix all pins at once. It's a €50 processor so the loss is not catastrophic. But I thought before I go buy a new one, I thought I'd check here whether anybody knows some magic trick, or a cheap generally-available tool to fix this.

  Read the article

• IE8 page reload hangs

  - by Rod

  When a 7mb HTM file is first opened (by clicking on the file icon or using Open With), both IE8 and Firefox display this browser file quickly. After the file is closed, Firefox will reopen this file quickly, but IE8 appears to hang during the reopen. Clearing the IE cache does not help. However, IE will reopen the file quickly again only if the File/Open/Browse feature of the menu bar is used (clicking on the file icon can be used only once between computer reboots). Testing suggests that the problem relates to the number of HTML hyperlinks pointing to another part of the file. There are many hyperlinks, but they are not a problem during the first load of the document (between computer reboots). What needs to be fixed to avoid use of the workaround? Using Windows XP SP3 Update 6/23/12 - Controlled testing shows that the number of hyperlinks is not the problem. The way this large file is opened is the difference: 1) from the IE menu bar, File/Open/Browse is consistent and fast (but not as fast as FF). 2) clicking on the file name in the folder (even when IE is the default program for this file type) causes a much delayed load of the file. Creating a smaller file demonstrates the delayed load, but verifies that the load eventually occurs.

  Read the article

• What software will tell me if I've already downloaded a video? [closed]

  - by dave

  (I use Linux KNOPPIX (distro 7.0.2, ver 3.3.7) on hard drive.) I download videos of TV programs from the 60s and 70s (mainly from youtube). I copy the youtube URL then paste it into www.keepvid.com to download it (usually .mp4 format). Having now got dozens of such video files (and growing) on my hard drive, I'd like to organise them. WHAT I'D LIKE TO DO IS: Say I find a new vid (of a TV prog) on youtube (or another site), and I'm about to download it. It's possible that I've WATCHED IT BEFORE but have forgotten. So is there software out there that I can run which will do the following: Check for me if I've ALREADY WATCHED the vid that I'm about to download. At the moment, once I've watched a vid on my hard drive, I move the file to another directory called "Watched". But this of course doesn't alert me in the immediate way that I want. . It would crudely suffice, if the software told me AFTER I've downloaded the vid, if I've ALREADY WATCHED it (ie if it's already in my "Watched" directory, or perhaps in a "watched" list). I sometimes alter the filename of the original video file on hard drive, so this might spoil a comparison. If the software alerts me to the fact that I've already watched the vid (preferably BEFORE I download it), then this will allow me to confidently download only new vids that I haven't watched before, and save me duplicating my effort. I'd be most grateful if anyone can suggest such a piece of software, or an alternative solution. I'll be honest, I avoid software that infringes your privacy and control - you know, software that automatically does things behind your back, like upgrades itself over the internet, puts things on your hard drive that you didn't ask for, or sends information from your hard drive to websites.

  Read the article

• 3 Server, is this a cluster scenario?

  - by HornedBeast

  Hello, At the moment I have one Ubuntu server, 9.10, running with a simple Samba share, a mail server, DNS server and DHCP server. Mostly its just there for file sharing and email server. I also have 2 other servers that are exactly the same hardware and spec as the first, which have an rsync set up to retrieve the shared folders and backs them up. However, if the first server goes down, all of our shares disappear along with our mail and the system must be rebuilt. Also I tend to find if people are downloading a large amount from the file server, no-one can access there emails - especially in the morning when everyone is signing in at once. Would it be more beneficial for me to have all 3 servers, all running the same services, doing the same thing with some sort of cluster with load balancing? In short, how can I get the best out of my 3 hardware servers? I'm not really sure where to begin looking, or how to go about such a setup where 3 servers are all identical, but perhaps one acts as the main load balancer?? If someone can point me in the right direction, or if this simply sounds like one of those Enterprise Cloud's that is now a default setup in Ubuntu Server 9.10+, then I'll go down that route. Cheers in advance. Andy

  Read the article

• Wireless connection silently dies randomly

  - by Force Flow

  I have two WAP4410N wireless access points powered using Power-Over-Ethernet. They are both connected to the same LAN and broadcasting the same SSID with a WPA2 password. One is using channel 1, while the other is using channel 11. There is coverage overlap where the signal from both access points hover around -75db to -85db while standing in the same physical location. DHCP is disabled, and is being provided by another network device. Every day or so, devices can connect and authenticate to the access points, but are not granted an IP address (and subsequently are unable access to the LAN or Internet). For devices that had already retrieved an IP address prior to the issue exhibiting itself, the devices simply stop communicating with LAN and Internet. However, I can still access each access point's web admin interface from the LAN. If I reboot both devices, the problem vanishes and devices are once again able to get an IP address and connect to the LAN and Internet. Are these symptoms of signal interference between the two WAPs or is this a completely different issue?

  Read the article

< Previous Page | 647 648 649 650 651 652 653 654 655 656 657 658  | Next Page >