Search Results

Search found 17808 results on 713 pages for 'installation package'.

Page 652/713 | < Previous Page | 648 649 650 651 652 653 654 655 656 657 658 659 | Next Page >

pxe boot fails with message: no DEFAULT or UI configuration directive found

- by spockaroo

I am trying to pxe-boot a machine (client), and in the process I am trying to setup a tftp server that this machine can boot off. On the server, which runs Ubuntu 10.10, I have setup dhcp, dns, nfs, and tftp-hpa servers. All the servers/deamons start fine. I tested the tftp server by using a tftp client and downloading a file that the server directory hosts. My /etc/xinet.d/tftp looks like this service tftp { disable = no socket_type = dgram wait = yes user = nobody server = /usr/sbin/in.tftpd server_args = -v -s /var/lib/tftpboot only_from = 10.1.0.0/24 interface = 10.1.0.1 } My /etc/default/tftpd-hpa looks like this RUN_DAEMON="yes" OPTIONS="-l -s /var/lib/tftpboot" TFTP_USERNAME="tftp" TFTP_DIRECTORY="/var/lib/tftpboot" TFTP_ADDRESS="0.0.0.0:69" TFTP_OPTIONS="--secure" My /var/lib/tftpboot/ directory looks like this initrd.img-2.6.35-25-generic-pae vmlinuz-2.6.35-25-generic-pae pxelinux.0 pxelinux.cfg -- default I did sudo chmod 644 /var/lib/tftpboot/pxelinux.cfg/default chmod 755 /var/lib/tftpboot/initrd.img-2.6.35-25-generic-pae chmod 755 /var/lib/tftpboot/vmlinuz-2.6.35-25-generic-pae /var/lib/tftpboot/pxelinux.cfg has the following contents SERIAL 0 19200 0 LABEL linux KERNEL vmlinuz-2.6.35-25-generic-pae APPEND root=/dev/nfs initrd=initrd.img-2.6.35-25-generic-pae nfsroot=10.1.0.1:/nfsroot ip=dhcp console=ttyS0,19200n8 rw I copied /var/lib/tftpboot/pxelinux.0 from /usr/lib/syslinux/ after installing the package syslinux-common. Also just for completeness, /etc/dhcp3/dhcpd.conf the following lines (relevant to this interface) subnet 10.1.0.0 netmask 255.255.255.0 { range 10.1.0.100 10.1.0.240; option routers 10.1.0.1; option broadcast-address 10.1.0.255; option domain-name-servers 10.1.0.1; filename "pxelinux.0"; } When I boot the client machine, and watch the output over the serial port, I notice that the client requests an ip address from the server and gets it. Then I see TFTP being displayed - indicating that it is trying to connect to the TFTP server. This succeeds, and I see TFTP.|, which return immediately displaying the following message PXELINUX 4.01 debian-20100714 Copyright (C) 1994-2010 H. Peter Anvin et al No DEFAULT or UI configuration directive found! boot: /var/log/syslog shows Feb 20 15:24:05 ch in.tftpd[2821]: tftp: client does not accept options What option is it talking about in the syslog? I assume it is referring to OPTIONS or TFTP_OPTIONS, but what am I doing wrong?

Read the article
Debian keyring error: "No keyring installed"

- by donatello

I have a Debian Squeeze EC2 AMI. On booting up an instance with it and trying to install packages with apt-get I get errors saying there is no keyring installed. Here is the error with apt-get update: root@ip:~# apt-get update Get:1 http://ftp.us.debian.org squeeze Release.gpg [1672 B] Ign http://ftp.us.debian.org/debian/ squeeze/contrib Translation-en Ign http://ftp.us.debian.org/debian/ squeeze/main Translation-en Ign http://ftp.us.debian.org/debian/ squeeze/non-free Translation-en Get:2 http://security.debian.org squeeze/updates Release.gpg [836 B] Ign http://security.debian.org/ squeeze/updates/contrib Translation-en Ign http://security.debian.org/ squeeze/updates/main Translation-en Hit http://ftp.us.debian.org squeeze Release Ign http://ftp.us.debian.org squeeze Release Ign http://security.debian.org/ squeeze/updates/non-free Translation-en Ign http://ftp.us.debian.org squeeze/main Sources/DiffIndex Get:3 http://security.debian.org squeeze/updates Release [86.9 kB] Ign http://security.debian.org squeeze/updates Release Ign http://ftp.us.debian.org squeeze/contrib Sources/DiffIndex Ign http://ftp.us.debian.org squeeze/non-free Sources/DiffIndex Ign http://ftp.us.debian.org squeeze/main amd64 Packages/DiffIndex Ign http://ftp.us.debian.org squeeze/contrib amd64 Packages/DiffIndex Ign http://ftp.us.debian.org squeeze/non-free amd64 Packages/DiffIndex Ign http://security.debian.org squeeze/updates/main Sources/DiffIndex Hit http://ftp.us.debian.org squeeze/main Sources Hit http://ftp.us.debian.org squeeze/contrib Sources Hit http://ftp.us.debian.org squeeze/non-free Sources Hit http://ftp.us.debian.org squeeze/main amd64 Packages Hit http://ftp.us.debian.org squeeze/contrib amd64 Packages Ign http://security.debian.org squeeze/updates/contrib Sources/DiffIndex Ign http://security.debian.org squeeze/updates/non-free Sources/DiffIndex Ign http://security.debian.org squeeze/updates/main amd64 Packages/DiffIndex Ign http://security.debian.org squeeze/updates/contrib amd64 Packages/DiffIndex Ign http://security.debian.org squeeze/updates/non-free amd64 Packages/DiffIndex Hit http://ftp.us.debian.org squeeze/non-free amd64 Packages Get:4 http://backports.debian.org squeeze-backports Release.gpg [836 B] Ign http://backports.debian.org/debian-backports/ squeeze-backports/main Translation-en Hit http://security.debian.org squeeze/updates/main Sources Hit http://security.debian.org squeeze/updates/contrib Sources Hit http://security.debian.org squeeze/updates/non-free Sources Hit http://security.debian.org squeeze/updates/main amd64 Packages Hit http://security.debian.org squeeze/updates/contrib amd64 Packages Hit http://security.debian.org squeeze/updates/non-free amd64 Packages Get:5 http://backports.debian.org squeeze-backports Release [77.6 kB] Ign http://backports.debian.org squeeze-backports Release Hit http://backports.debian.org squeeze-backports/main amd64 Packages/DiffIndex Hit http://backports.debian.org squeeze-backports/main amd64 Packages Fetched 3346 B in 0s (5298 B/s) Reading package lists... Done W: GPG error: http://ftp.us.debian.org squeeze Release: No keyring installed in /etc/apt/trusted.gpg.d/. W: GPG error: http://security.debian.org squeeze/updates Release: No keyring installed in /etc/apt/trusted.gpg.d/. W: GPG error: http://backports.debian.org squeeze-backports Release: No keyring installed in /etc/apt/trusted.gpg.d/. Googling around didn't really help me fix this problem. I tried installing the packages "debian-keyring" and "debian-archive-keyring" but the error does not go away. I'd like to avoid installing unstrusted packages. Any help is appreciated! Why does this error happen and where can I learn more?

Read the article
Installing gnome on Linode with Ubuntu 9.10 x64 - remote VNC/RDP

- by Kieran Benton

Hi, I'm a self confessed Linux newbie, having lived and worked mostly within the Windows world for most of my life. I'm making the effort to try moving my virtual host from a Windows box to a Linode instance to try and better learn Linux, and one of the uses I occasionally have with my current Windows VPS is to RDP into it and browse the internet. I'm aware that this is probably not best practice (from either performance or security), and most of the time I will be learning from the shell, but I do occasionally need to boot into a GUI. Because of this, I'd like the ability within my Ubuntu installation on Linode to start/stop Windows X and Gnome at will after SSHing in (startx? gdm?), so I've tried: apt-get install ubuntu-desktop Reboot startx But I've got an error that no amount of googling has helped me with so far, which I'm assuming is something to do with the fact the box is headless and X needs some more configuration that is beyond me at the moment: root@local:~# startx hostname: Unknown host xauth: creating new authority file /root/.Xauthority xauth: creating new authority file /root/.Xauthority xauth: (argv):1: bad display name "local.kieranbenton.com:0" in "list" command xauth: (stdin):1: bad display name "local.kieranbenton.com:0" in "add" command X.Org X Server 1.6.4 Release Date: 2009-9-27 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.24-23-server x86_64 Ubuntu Current Operating System: Linux local.kieranbenton.com 2.6.31.5-x86_64-linode9 #1 SMP Mon Oct 26 19:35:25 UTC 2009 x86_64 Kernel command line: root=/dev/xvda xencons=tty console=tty1 console=hvc0 nosep nodevfs ramdisk_size=32768 ro Build Date: 26 October 2009 05:19:56PM xorg-server 2:1.6.4-2ubuntu4 (buildd@) Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Wed Dec 2 15:50:23 2009 Primary device is not PCI (==) Using default built-in configuration (21 lines) (EE) open /dev/fb0: No such file or directory (EE) No devices detected. Fatal server error: no screens found Please consult the The X.Org Foundation support at http://wiki.x.org for help. Please also check the log file at "/var/log/Xorg.0.log" for additional information. ddxSigGiveUp: Closing log Can anyone give me any pointers as to how to go from here and get VNC/RDP setup? (RDP would be preferred?). Thanks.

Read the article
Installing gnome on Linode with Ubuntu 9.10 x64 - remote VNC/RDP

- by Kieran Benton

Hi, I'm a self confessed Linux newbie, having lived and worked mostly within the Windows world for most of my life. I'm making the effort to try moving my virtual host from a Windows box to a Linode instance to try and better learn Linux, and one of the uses I occasionally have with my current Windows VPS is to RDP into it and browse the internet. I'm aware that this is probably not best practice (from either performance or security), and most of the time I will be learning from the shell, but I do occasionally need to boot into a GUI. Because of this, I'd like the ability within my Ubuntu installation on Linode to start/stop Windows X and Gnome at will after SSHing in (startx? gdm?), so I've tried: apt-get install ubuntu-desktop Reboot startx But I've got an error that no amount of googling has helped me with so far, which I'm assuming is something to do with the fact the box is headless and X needs some more configuration that is beyond me at the moment: root@local:~# startx hostname: Unknown host xauth: creating new authority file /root/.Xauthority xauth: creating new authority file /root/.Xauthority xauth: (argv):1: bad display name "local.kieranbenton.com:0" in "list" command xauth: (stdin):1: bad display name "local.kieranbenton.com:0" in "add" command X.Org X Server 1.6.4 Release Date: 2009-9-27 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.24-23-server x86_64 Ubuntu Current Operating System: Linux local.kieranbenton.com 2.6.31.5-x86_64-linode9 #1 SMP Mon Oct 26 19:35:25 UTC 2009 x86_64 Kernel command line: root=/dev/xvda xencons=tty console=tty1 console=hvc0 nosep nodevfs ramdisk_size=32768 ro Build Date: 26 October 2009 05:19:56PM xorg-server 2:1.6.4-2ubuntu4 (buildd@) Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Wed Dec 2 15:50:23 2009 Primary device is not PCI (==) Using default built-in configuration (21 lines) (EE) open /dev/fb0: No such file or directory (EE) No devices detected. Fatal server error: no screens found Please consult the The X.Org Foundation support at http://wiki.x.org for help. Please also check the log file at "/var/log/Xorg.0.log" for additional information. ddxSigGiveUp: Closing log Can anyone give me any pointers as to how to go from here and get VNC/RDP setup? (RDP would be preferred?). Thanks.

Read the article
Win7 playback of dvr-ms files stutters

- by Jim Lynn

I've just had to install Windows 7 on my Media Center machine because my Vista installation had a faulty drive. I've got the latest drivers that I can find - Intel 945GM integrated Graphics, Realtek audio drivers. Things are working OK with one exception. Playback of old recordings, from dvr-ms format files, is choppy. The picture freezes for a fraction of a second, then quickly catches up. The sound is uninterrupted and doesn't pause. These freezes happen once every 5 seconds or so. It's very regular. Playback of Live TV from the digital tuner is perfectly smooth. DVD playback is perfectly smooth. As an experiment, I used the MPEG editing package VideoReDo to create a small test file in three different formats. This program takes the raw MPEG streams and repackages them into the desired container. I took the same clip and created three files in three formats: dvr-ms (Microsoft's old recorded TV format); mpg (standard MPEG); and ts (raw MPEG transport stream of the kind often produced by PVRs). When these three files are played back under Windows 7, the mpg and ts files play smoothly, but the dvr-ms file stutters. The last piece of data I have is that two other Windows 7 machines can play back dvr-ms files smoothly with no stuttering. One is a netbook, with less grunt than the media centre. So there must be something specific about my Media Center machine that's causing the problem. Does anyone have any idea where I can look now? I don't know much about AV software, codecs, filter graphs etc. but I suspect that's where the problem lies. Rendering the video isn't the problem, but extracting the streams is. How would I go about diagnosing the problem? Edited to add: I just used the GraphStudio tool to look at the filter graph on the offending PC. The filter graph it uses by default for dvr-ms looks identical to the other machines, and, interestingly, when I play the files using GraphStudio they run smoothly. Under Windows Media Player and Windows Media Center they stutter. I'd like to see the filter graph for WMP but GraphStudio won't show it. It looks like WMP and WMC are using a different decoding path to GraphStudio. Edited again to add: Today I purchased a new HDTV. The same Media Center driving the TV at 1080p is now playing back the old Recorded TV files smoothly, without stuttering. So whatever the cause of the original problem, using a different resolution seems to have removed the problem. It might also explain why nobody else has had this problem. I doubt many people use Media Centre with a 14in portable TV.

Read the article
Getting macro keys from a razer blackwidow to work on linux

- by Journeyman Geek

I picked up a razer blackwidow ultimate that has additional keys meant for macros that are set using a tool that's installed on windows. I'm assuming that these arn't some fancypants joojoo keys and should emit scancodes like any other keys. Firstly is there a standard way to check these scancodes in linux? Secondly how do i set these keys to do things in command line and x based linux setups? My current linux install is xubuntu 10.10, but i'll be switching to kubuntu once i have a few things fixed up. Ideally the answer should be generic and system-wide Things i have tried so far: showkeys from the built in kbd package (in a seperate vt) - macro keys not detected xev - macro keys not detected lsusb and evdev output this ahk script's output suggests the M keys are not outputting standard scancodes Things i need to try snoopy pro + reverse engineering (oh dear) Wireshark - preliminary futzing around seems to indicate no scancodes emitted when what i seem to think is the keyboard is monitored and keys pressed. Might indicate additional keys are a seperate device or need to be initialised somehow. Need to cross reference that with lsusb output from linux, in 3 scenarios - standalone, passed through to a windows VM without the drivers installed, and the same with. LSUSB only detects one device on a standalone linux install It might be useful to check if the mice use the same razer synapse driver , since that means some variation of razercfg might work (not detected. only seems to work for mice) Things i have Have worked out: In a windows system with the driver, the keyboard is seen as a keyboard and a pointing device. And said pointing device uses, in addition to your bog standard mouse drivers.. a driver for something called a razer synapse. Mouse driver seen in linux under evdev and lsusb as well Single Device under OS X apparently, though i have yet to try lsusb equivilent on that Keyboard goes into pulsing backlight mode in OS X upon initialisation with the driver. This should probably indicate that there's some initialisation sequence sent to the keyboard on activation. They are, in fact, fancypants joojoo keys. Extending this question a little I have access to a windows system so if i need to use any tools on that to help answer the question, its fine. I can also try it on systems with and without the config utility. The expected end result is still to make those keys usable on linux however. I also realise this is a very specific family of hardware. I would be willing to test anything that makes sense on a linux system if i have detailed instructions - this should open up the question to people who have linux skills, but no access to this keyboard The minimum end result i require I need these keys detected, and usable in any fashion on any of the current graphical mainstream ubuntu varients

Read the article
postfix cannot getting my domain name?

- by Kossel

Hi I'm trying to setup webmin+postfix+dovecot+roundcube, for this moment I want things be as simple as possible so I'm using linux users as email accounts. I can send/receive from the same domain, I mean [email protected] can send/receive to/from [email protected] I tested smtp/imap with outlook and says no problem. if I send a mail from gmail it reject with error of: Technical details of temporary failure: The recipient server did not accept our requests to connect. when I login with roundcube the email address display in the right corner is something like user1@com and I get this error message from logs: [11-Nov-2012 07:39:03 +0400]: IMAP Error: Login failed for user1 from 187.150.xx.xx. Could not connect to com:143: php_network_getaddresses: getaddrinfo failed: Name or service not known in /var/www/webmail/program/include/rcube_imap.php on line 191 (POST /webmail/?_task=login&_action=login) it says Could not connect to com:143 looks like it cannot read the domain name. I used http://mxtoolbox.com/ to check the mx record and it says it can find the server of mail.mydomain.com. I quit sure the problema is from postfix or my server configs, but I have been looking for every config file and cannot find the answer of this. any suggestion I will appreciate. here are some of my configs (I don't want to make this question too long, I can provide any other information to solve this question): postfix main.cf #myorigin = /etc/mailname smtpd_banner = $myhostname ESMTP $mail_name (Debian/GNU) biff = no # appending .domain is the MUA's job. append_dot_mydomain = no # Uncomment the next line to generate "delayed mail" warnings #delay_warning_time = 4h readme_directory = no # TLS parameters smtpd_tls_cert_file = /etc/ssl/certs/ssl-cert-snakeoil.pem smtpd_tls_key_file = /etc/ssl/private/ssl-cert-snakeoil.key smtpd_use_tls=yes smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache smtpd_sasl_security_options = noanonymous smtpd_sasl_auth_enable = yes smtpd_sasl_type = dovecot smtpd_sasl_path = private/auth # See /usr/share/doc/postfix/TLS_README.gz in the postfix-doc package for # information on enabling SSL in the smtp client. mydomain = mydomain.com myhostname = mail.mydomain.com alias_maps = hash:/etc/aliases alias_database = hash:/etc/aliases mydestination = $mydomain, $myhostname mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 mailbox_command = procmail -a "$EXTENSION" mailbox_size_limit = 0 recipient_delimiter = + virtual_alias_domains = mydomain.com smtpd_recipient_restrictions = permit_mynetworks reject_unauth_destination permit_sasl_authenticated myorigin = $mydomain roundcube conf // ---------------------------------- // IMAP // ---------------------------------- $rcmail_config['default_host'] = '%d'; $rcmail_config['default_port'] = 143; $rcmail_config['imap_auth_type'] = null; $rcmail_config['imap_delimiter'] = null; $rcmail_config['imap_ns_personal'] = null; $rcmail_config['imap_ns_other'] = null; $rcmail_config['imap_ns_shared'] = null; $rcmail_config['imap_force_caps'] = false; $rcmail_config['imap_force_lsub'] = false; $rcmail_config['imap_force_ns'] = false; $rcmail_config['imap_timeout'] = 0; $rcmail_config['imap_auth_cid'] = null; $rcmail_config['imap_auth_pw'] = null; $rcmail_config['imap_cache'] = null; $rcmail_config['messages_cache'] = false;

Read the article
How to reinstall OEM Windows 98 SE?

- by Sammy

I'm trying to install Windows 98 SE on an old PC and it's not going well. I run into this problem. Searching for Boot Record from Floppy..OK Starting Windows 98... TOSHIBA Enhanced-IDE CD/DVD-ROM Device Driver (ATAPI) Version 2.24 (C)Copyright Toshiba Corp. 1995-1999. All rights reserved. Device Name : TOSCD001 Number of units : 1 MSCDEX Version 2.25 Copyright (C) MIcrosoft Corp. 1986-1995. All rights reserved. Drive Z: = Driver TOSCD001 unit 0 TOSHIBA MACHINE Invalid drive specification Path not found - C:\TOOLS\CDROMDRV.SYS Invalid drive specification Invalid drive specification After that last line, it leaves me at a bitmap image displaying instructions to reboot with Ctrl+Alt+Del. It doesn't say why I have to reboot, and it doesn't state any error type, it just want's me to reboot for no apparent reason. After reboot, it just boots up from Floppy again and it cycles through the same thing all over again. The computer has been restored to original specification. Original system recovery "CD-ROM" discs are available and they are not scratched or anything, they are in very good condition. It's a set of 3 CDs, and the first disc labeled "1/3" should be the one holding the OEM version of Windows 98 SE. There is also a boot disk for Windows 98. I'm not sure what the other two discs are for. This computer came with three language support, so those could be holding different language versions or additional OEM discs. But I'm quite sure that the first disc holds the main operating system. BIOS has been set to optimized defaults. Boot priority is as follows; Floppy, IDE-0, CD-ROM. Under Standard CMOS settings, BIOS scans and autoconfigures both the hard drive and the CD/DVD drive. On POST it finds them both, and it finds the DOS bootdisk and starts preparing for installation, as you can see above. So what's this "invalid drive specification" about? Why isn't the installation starting? Updates Update 1 Booting from CD disc 2 In desperation I tried booting from the second CD. Boot order was; Floppy, CD-ROM, IDE-0. It boots normally from floppy disk, just like above, but then returns following. File not found - Z:\3LNGINST\TOOLS\PARTINFO.TXT I accidentally pressed some key on the keyboard, and before I knew it, the following screen showed up. Create Primary DOS Partition Current fixed disk drive: 1 Verifying drive integrity, 16% complete. After completion another screen showed up. Create Primary DOS Partition Current fixed disk drive: 1 Do you wish to use the maximum available size for a Primary DOS Partition and make the partition active (Y/N)?....................? [Y] Verifying drive integrity, 7% complete. I didn't choose Yes, it was set automatically. After completion the computer was automatically rebooted. Then I got a new screen. This is in Norwegian/Swedish/Finnish. Here's the message in Swedish. Hårddisken är inte klar för återställning av programvara. Installationsprogrammet måste skapa nya partitioner (C:, D:, ...). VARNING! ALLT INNEHÅLL PÅ HÅRDDISKEN KOMMER ATT RADERAS! Tryck på en tangent om du vill fortsätta (eller CTRL-C för att avbryta). Let me translate that. Hard drive is not ready for restoring the software. Setup program has to create new partitions (C:, D:, ...). WARNING! ALL CONTENTS ON THE HARD DRIVE WILL BE ERASED! Press any key to continue (or CTRL-C to cancel). I pressed Enter and it started formatting the hard drive. WARNING, ALL DATA ON NON-REMOVABLE DISK DRIVE c: WILL BE LOST! Proceed with Format (Y/N)?y Formatting 14,67.53M 1 percent completed. It automatically sets the "y" option and starts formatting. Rebooting with CD disc 1 After completing this operation it rebooted automatically. I inserted CD disc 1 and there was no issue with "invalid drive specification" anymore. Instead, a bitmap menu was displayed where it asked me to choose a language. And I thought I had it there for a while but it didn't work out. After choosing the language, another menu was displayed asking me to choose a type of recovery (restore pre-installed software OR restore hard drive partitions and pre-installed software). I opted for the second option. Then a data destruction warning showed up where I just pressed 1 to Continue. It did something and then just rebooted and the same formatting screen shows up as before. So something is not right. Am I doing it wrong? I seem to have come past the CD-ROM driver issue at least. But now I'm stuck with this problem... it seems to have something to do with the hard drive. Like... why is is it always trying to format it? Isn't it enough to format it once? By the way, it needs to be formatted as FAT32, right? Windows 98 doesn't support NTFS? I think FDISK should have taken care of this already. I know this is an old hard drive, but I connected to my main computer and it was able to read and write to it without a problem. It does have bad sectors though, but it's expected on an old hard drive like this. Any ideas?.. Update 2 I seem to be repeatedly getting stuck at the format screen where it asks to press any key to continue. So tried to cancel it this time with Ctrl+C. This leaves me at: A:\TOOLS> I can do DIR and CD and I tried to change to Z: drive. I tried running "setup" but there is no such thing. Z:\>setup Bad command or file name Update 3 Floppy structure Here's the file/folder structure of the floppy disk. A:\>dir /s Volume in drive A has no label. Volume Serial Number is 1700-1069 Directory of A:\ 1999-10-11 10:44 <DIR> BMP 1998-05-11 22:01 93 880 COMMAND.COM 1999-10-11 10:44 <DIR> factory 1999-10-11 10:44 <DIR> lang 1999-10-11 10:44 <DIR> TOOLS 2000-05-19 15:32 339 CONFIG.SYS 1999-10-26 13:38 0 BOOTLOG.TXT 2000-06-08 08:32 3 691 AUTOEXEC.BAT 4 File(s) 97 910 bytes Directory of A:\BMP 1999-10-11 10:44 <DIR> . 1999-10-11 10:44 <DIR> .. 0 File(s) 0 bytes Directory of A:\factory 1999-10-11 10:44 <DIR> . 1999-10-11 10:44 <DIR> .. 2000-06-08 13:09 2 662 3LNGINSF.BAT 1 File(s) 2 662 bytes Directory of A:\lang 1999-10-11 10:44 <DIR> . 1999-10-11 10:44 <DIR> .. 1998-11-24 08:02 49 575 FORMAT.COM 1998-11-24 08:02 63 900 FDISK.EXE 2 File(s) 113 475 bytes Directory of A:\TOOLS 1999-10-11 10:44 <DIR> . 1999-10-11 10:44 <DIR> .. 1998-05-06 22:01 49 575 FORMAT.COM 1995-10-27 20:29 28 164 BMPVIEW.EXE 1999-01-26 15:54 15 MAKEPA32.TXT 1998-05-06 22:01 3 878 XCOPY.EXE 1998-05-06 22:01 41 472 XCOPY32.MOD 1998-05-06 22:01 33 191 HIMEM.SYS 1998-05-06 22:01 125 495 EMM386.EXE 1998-05-06 22:01 18 967 SYS.COM 1996-01-31 21:55 18 CLK.COM 1994-04-02 08:20 22 HARDBOOT.COM 1999-02-03 15:46 15 MAKEPA16.TXT 1999-04-14 16:36 7 840 PARTFO32.EXE 2000-05-19 15:01 1 169 PARTFORM.BAT 1996-10-02 01:47 1 642 MBRCLR.COM 1999-07-01 11:58 8 175 BIOSCHKN.EXE 1998-06-23 08:55 5 904 PAR-TYPE.EXE 1998-11-24 08:02 29 271 MODE.COM 1998-11-24 08:02 15 252 ATTRIB.EXE 1998-11-24 08:02 19 083 DELTREE.EXE 1999-04-21 15:01 23 304 NTBB.EXE 1997-05-07 14:19 1 SYS.TXT 1999-07-01 12:23 61 566 F3DCHK.EXE 1998-05-11 20:01 34 566 KEYBOARD.SYS 1998-05-11 20:01 19 927 KEYB.COM 1999-10-26 14:31 910 partinfo.txt 1998-06-16 15:58 5 936 CHKDRVAC.EXE 1998-05-06 22:01 63 900 FDISK.EXE 1998-05-06 22:01 45 379 SMARTDRV.EXE 1992-12-03 19:48 10 695 SCISET.EXE 1997-06-25 15:49 6 YENT 1998-05-06 22:01 25 473 MSCDEX.EXE 1998-05-06 22:01 5 239 CHOICE.COM 1997-07-18 17:41 6 876 MBR.COM 1997-07-01 15:01 6 545 CHK2GB.COM 1998-06-10 20:04 8 128 PARTFORM.EXE 1990-01-04 02:09 19 MAKEPAR2.TXT 1990-01-04 01:00 27 MAKEPAR3.TXT 1990-01-04 01:00 27 MAKEPAR4.TXT 1998-02-13 13:47 15 MAKEPART.TXT 1999-04-14 13:47 5 200 DISKSIZE.EXE 1999-05-06 14:56 7 856 PARTFO16.EXE 1999-01-13 11:13 13 720 CDROMDRV.SYS 42 File(s) 734 463 bytes Total Files Listed: 49 File(s) 948 510 bytes 12 Dir(s) 268 800 bytes free A:\> CONFIG.SYS contents Here's the content of CONFIG.SYS. DEVICE=A:\TOOLS\HIMEM.SYS /TESTMEM:OFF REM I=B000-B7ff for Desktop BIOSes rem DEVICE=A:\TOOLS\EMM386.EXE NOEMS I=B000-B7ff x=C000-D000 DEVICE=A:\TOOLS\EMM386.EXE NOEMS x=C000-D000 DEVICE=A:\TOOLS\CDROMDRV.SYS /D:TOSCD001 BUFFERS=10 FILES=69 DOS=HIGH,UMB STACKS=9,256 LASTDRIVE=Z SWITCHES=/F SHELL=A:\COMMAND.COM /P /E:2048 AUTOEXEC.BAT contents :BEGIN @ECHO OFF PATH=A:\;A:\TOOLS; MSCDEX /D:TOSCD001 /L:Z /M:10 smartdrv 1024 128 SET TOOLS=A:\TOOLS SET COMSPEC=A:\COMMAND.COM SET EXITDRIVE=C: SET EXITPATH=\ CALL Z:\SETENV.BAT > NUL :TOSHCHK BIOSChkN IF NOT ERRORLEVEL 1 goto C_ACCESS BMPVIEW Z:\3LNGINST\BMP\NO_TOSP3.bmp /X=120 /Y=80 PAUSE > NUL SET EXITDRIVE=A: GOTO END :C_ACCESS CALL PARTFORM.BAT :C_EMPTY IF EXIST C:\*.* GOTO C_NOTEMPTY call z:\setenv.bat>nul goto PREPDU :C_NOTEMPTY REM ------------------MENU------------------------ :STARTMENU CLS BMPVIEW Z:\3LNGINST\BMP\LANGSELC.BMP /X=120 /Y=120 CLK CHOICE /C:123 /N >NUL REM L is the language that is selected IF ERRORLEVEL 1 SET L=%LNG1% IF ERRORLEVEL 2 SET L=%LNG2% IF ERRORLEVEL 3 SET L=%LNG3% SET BMP=BMP%L% BMPVIEW Z:\3LNGINST\%bmp%\HDDMENU.BMP /X=72 /Y=82 CLK CHOICE /C:129F /N > NUL IF ERRORLEVEL 4 GOTO FACTORY_MENU IF ERRORLEVEL 3 GOTO EXIT_MENU IF ERRORLEVEL 2 GOTO PARTFORM_MENU IF ERRORLEVEL 1 GOTO FORMAT_MENU GOTO END :FACTORY_MENU BMPVIEW Z:\3LNGINST\%bmp%\qformat.bmp /X=120 /Y=140 CLK choice /c:12 /N >nul IF ERRORLEVEL 2 GOTO STARTMENU IF ERRORLEVEL 1 GOTO FORMATF GOTO END :EXIT_MENU BMPVIEW Z:\3LNGINST\%bmp%\9.bmp /XC /X=96 /Y=267 choice /C:1pause /T:1,01 >nul SET EXITDRIVE=A: SET EXITPATH=\lang cls mode mono rem keyb xx>nul cls GOTO END :PARTFORM_MENU BMPVIEW Z:\3LNGINST\%bmp%\2.bmp /XC /X=96 /Y=216 choice /C:1pause /T:1,01 >nul BMPVIEW Z:\3LNGINST\%bmp%\partform.bmp /X=120 /Y=140 CLK choice /c:12 /N >nul IF ERRORLEVEL 2 GOTO STARTMENU IF ERRORLEVEL 1 GOTO PART_FORM SET EXITDRIVE=A: GOTO END :FORMAT_MENU BMPVIEW Z:\3LNGINST\%bmp%\1.bmp /XC /X=96 /Y=165 choice /C:1pause /T:1,01 >nul BMPVIEW Z:\3LNGINST\%bmp%\qformat.bmp /X=120 /Y=140 CLK choice /c:12 /N >nul IF ERRORLEVEL 2 GOTO STARTMENU IF ERRORLEVEL 1 GOTO FORMAT SET EXITDRIVE=A: GOTO END REM ------------------ MENU END ------------------------ :FORMAT bmpview Z:\3LNGINST\%bmp%\1.bmp /XC /X=145 /Y=235 choice /C:1pause /T:1,01 >nul CLS IF (%QFORMAT%)==(NO) GOTO FULLFO FORMAT C: /Q /V:"" <A:\TOOLS\YENT >NUL call z:\setenv.bat>nul goto PREPDU :FULLFO FORMAT C: /V:"" <A:\TOOLS\YENT call z:\setenv.bat>nul goto PREPDU :FORMATF CLS IF (%QFORMAT%)==(NO) GOTO FULLFO_F FORMAT C: /Q /V:"" <A:\TOOLS\YENT >NUL call z:\setenv.bat>nul goto PREPDU_F :FULLFO_F FORMAT C: /V:"" <A:\TOOLS\YENT call z:\setenv.bat>nul goto PREPDU_F :PART_FORM bmpview Z:\3LNGINST\bmp\1.bmp /XC /X=145 /Y=235 choice /C:1pause /T:1,01 >nul MBR /! HARDBOOT REM ====================== Triple Select ====================== :PREPDU XCOPY z:\3LNGINST\*.* C:\*.* /E /S /V >NUL ATTRIB -H -R -S C:\TOOLS\CDROMDRV.SYS COPY A:\TOOLS\CDROMDRV.SYS C:\TOOLS /Y SYS C: >NUL goto REBOOT :PREPDU_F copy A:\TOOLS\SMARTDRV.EXE C:\ /Y ATTRIB -H -R -S C:\SMARTDRV.EXE copy A:\FACTORY\3LNGINSF.bat c:\ c:\3LNGINSF.bat cls REM ====================== Dual Select END ====================== REM --------------- END ------------------ :REBOOT SMARTDRV.EXE /C bmpview Z:\3LNGINST\BMP\reboot3.bmp /X=120 /Y=140 :FOREVER pause >nul goto FOREVER :END SMARTDRV.EXE /C %EXITDRIVE% cd %EXITPATH% echo on CD structure S:\>dir /s Volume in drive S is T3ELK4SC Volume Serial Number is 2042-5BC9 Directory of S:\ 2000-08-22 14:14 <DIR> 3LNGINSF 2000-08-22 14:14 <DIR> 3LNGINST 2000-06-15 15:57 <DIR> CRC 2000-06-15 12:04 387 667 767 T310C1NO.W98 2000-09-07 15:36 273 setenv.BAT 2 File(s) 387 668 040 bytes Directory of S:\3LNGINSF 1601-01-01 02:00 <DIR> . 1601-01-01 02:00 <DIR> .. 1999-10-27 10:51 1 806 AUTOEXEC.BAT 2000-08-22 14:14 <DIR> BMP 2000-05-19 15:29 265 CONFIG.SYS 2000-08-22 14:14 <DIR> POSTINST 2000-08-22 14:14 <DIR> TOOLS 2000-08-22 14:14 <DIR> WIN98SYS 2 File(s) 2 071 bytes Directory of S:\3LNGINSF\BMP 1601-01-01 02:00 <DIR> . 1601-01-01 02:00 <DIR> .. 1997-04-22 09:43 718 1.BMP 1997-04-22 09:44 718 2.BMP 1999-01-04 02:38 718 3.BMP 2000-07-05 11:22 60 118 Cdchg2.bmp 2000-07-05 11:22 60 118 Cdchg3.bmp 2000-07-05 13:37 60 118 Fin.bmp 2000-07-06 14:18 120 118 Menu.bmp 2000-07-05 13:34 60 118 Nor.bmp 2000-07-05 11:53 35 318 Progress.bmp 2000-07-05 13:40 60 118 Swe.bmp 2000-07-05 12:09 84 118 Wrongcd2.bmp 2000-07-05 12:09 84 118 Wrongcd3.bmp 12 File(s) 626 416 bytes Directory of S:\3LNGINSF\POSTINST 1601-01-01 02:00 <DIR> . 1601-01-01 02:00 <DIR> .. 2000-05-19 09:15 33 POSTINST.BAT 1 File(s) 33 bytes Directory of S:\3LNGINSF\TOOLS 1601-01-01 02:00 <DIR> . 1601-01-01 02:00 <DIR> .. 2000-07-06 14:49 3 593 3LNGINST.BAT 1998-11-24 08:02 15 252 ATTRIB.EXE 1995-10-27 18:29 28 164 BMPVIEW.EXE 1999-01-13 11:13 13 720 CDROMDRV.SYS 1998-05-06 20:01 5 239 CHOICE.COM 1996-01-31 19:55 18 CLK.COM 1998-11-24 08:02 19 083 DELTREE.EXE 1998-05-06 20:01 125 495 EMM386.EXE 1999-07-01 12:23 61 566 F3DCHK.EXE 1998-05-06 20:01 49 575 FORMAT.COM 1994-04-02 06:20 22 HARDBOOT.COM 1998-05-06 20:01 33 191 HIMEM.SYS 1998-05-06 20:01 25 473 MSCDEX.EXE 1998-05-06 20:01 12 663 RAMDRIVE.SYS 1998-05-06 20:01 45 379 SMARTDRV.EXE 1997-05-07 14:19 1 SYS.TXT 1995-09-27 14:25 6 813 VOLCHECK.EXE 1998-05-06 20:01 3 878 XCOPY.EXE 1998-05-06 20:01 41 472 XCOPY32.MOD 1997-06-25 13:49 6 YENT 20 File(s) 490 603 bytes Directory of S:\3LNGINSF\WIN98SYS 1601-01-01 02:00 <DIR> . 1601-01-01 02:00 <DIR> .. 1998-12-04 20:00 222 390 IO.SYS 1998-05-06 20:01 18 967 SYS.COM 1998-05-06 20:01 93 880 command.com 3 File(s) 335 237 bytes Directory of S:\3LNGINST 1601-01-01 02:00 <DIR> . 1601-01-01 02:00 <DIR> .. 1999-05-31 09:51 1 576 AUTOEXEC.BAT 2000-08-22 14:14 <DIR> BMP 2000-08-22 14:14 <DIR> Bmpfin 2000-08-22 14:14 <DIR> Bmpnor 2000-08-22 14:14 <DIR> Bmpswe 2000-05-19 15:30 265 CONFIG.SYS 2000-08-22 14:14 <DIR> POSTINST 2000-08-22 14:14 <DIR> TOOLS 2000-08-22 14:14 <DIR> WIN98SYS 2 File(s) 1 841 bytes Directory of S:\3LNGINST\BMP 1601-01-01 02:00 <DIR> . 1601-01-01 02:00 <DIR> .. 1997-04-22 09:43 718 1.BMP 1997-04-22 09:44 718 2.BMP 1999-01-04 02:38 718 3.BMP 2000-07-05 11:22 60 118 Cdchg2.bmp 2000-07-05 11:22 60 118 Cdchg3.bmp 2000-07-05 13:37 60 118 Fin.bmp 2000-07-06 14:18 120 118 Menu.bmp 2000-07-05 13:34 60 118 Nor.bmp 2000-07-05 11:53 35 318 Progress.bmp 2000-07-06 14:08 40 518 Reboot3.bmp 2000-07-05 13:40 60 118 Swe.bmp 2000-07-05 12:09 84 118 Wrongcd2.bmp 2000-07-05 12:09 84 118 Wrongcd3.bmp 2000-07-05 13:52 48 118 langselc.bmp 2000-07-05 11:47 57 318 no_tosp3.bmp 15 File(s) 772 370 bytes Directory of S:\3LNGINST\Bmpfin 1601-01-01 02:00 <DIR> . 1601-01-01 02:00 <DIR> .. 1997-04-22 09:43 718 1.BMP 1997-04-22 09:44 718 2.BMP 1998-06-13 00:07 718 9.bmp 2000-03-08 15:02 78 486 Hddmenu.bmp 2000-03-08 15:31 25 318 No_tospc.bmp 2000-03-08 15:37 36 518 PARTFORM.BMP 2000-03-08 15:42 36 518 Qformat.bmp 7 File(s) 178 994 bytes Directory of S:\3LNGINST\Bmpnor 1601-01-01 02:00 <DIR> . 1601-01-01 02:00 <DIR> .. 1997-04-22 09:43 718 1.BMP 1997-04-22 09:44 718 2.BMP 1998-06-13 00:07 718 9.bmp 1999-05-05 13:26 78 486 Hddmenu.bmp 1998-07-13 11:36 25 318 No_tospc.bmp 1998-07-13 11:41 36 518 PARTFORM.BMP 1998-07-13 11:45 36 518 Qformat.bmp 7 File(s) 178 994 bytes Directory of S:\3LNGINST\Bmpswe 1601-01-01 02:00 <DIR> . 1601-01-01 02:00 <DIR> .. 1997-04-22 09:43 718 1.BMP 1997-04-22 09:44 718 2.BMP 1998-06-13 00:07 718 9.bmp 1999-05-06 08:14 78 486 Hddmenu.bmp 1998-07-10 16:25 25 318 No_tospc.bmp 1998-07-10 16:29 36 518 PARTFORM.BMP 1998-07-10 17:08 36 518 Qformat.bmp 7 File(s) 178 994 bytes Directory of S:\3LNGINST\POSTINST 1601-01-01 02:00 <DIR> . 1601-01-01 02:00 <DIR> .. 2000-05-19 09:15 33 POSTINST.BAT 1 File(s) 33 bytes Directory of S:\3LNGINST\TOOLS 1601-01-01 02:00 <DIR> . 1601-01-01 02:00 <DIR> .. 2000-05-19 14:52 3 898 3LNGINST.BAT 1995-10-27 18:29 28 164 BMPVIEW.EXE 1999-01-13 11:13 13 720 CDROMDRV.SYS 1998-05-06 20:01 5 239 CHOICE.COM 1996-01-31 19:55 18 CLK.COM 1998-05-06 20:01 125 495 EMM386.EXE 1999-07-01 12:23 61 566 F3DCHK.EXE 1998-05-06 20:01 49 575 FORMAT.COM 1994-04-02 06:20 22 HARDBOOT.COM 1998-05-06 20:01 33 191 HIMEM.SYS 1998-05-06 20:01 25 473 MSCDEX.EXE 2000-07-06 14:41 910 PARTINFO.TXT 1998-05-06 20:01 12 663 RAMDRIVE.SYS 1998-05-06 20:01 45 379 SMARTDRV.EXE 1997-05-07 14:19 1 SYS.TXT 1995-09-27 14:25 6 813 VOLCHECK.EXE 1998-05-06 20:01 3 878 XCOPY.EXE 1998-05-06 20:01 41 472 XCOPY32.MOD 1997-06-25 13:49 6 YENT 19 File(s) 457 483 bytes Directory of S:\3LNGINST\WIN98SYS 1601-01-01 02:00 <DIR> . 1601-01-01 02:00 <DIR> .. 1998-12-04 20:00 222 390 IO.SYS 1998-05-06 20:01 18 967 SYS.COM 1998-05-06 20:01 93 880 command.com 3 File(s) 335 237 bytes Directory of S:\CRC 1601-01-01 02:00 <DIR> . 1601-01-01 02:00 <DIR> .. 2000-06-15 12:07 181 422 T310C1NO.ALL 2000-06-15 12:09 215 427 T310C1NO.CRC 2000-06-15 12:07 2 157 T310C1NO.HID 3 File(s) 399 006 bytes Total Files Listed: 104 File(s) 391 625 352 bytes 42 Dir(s) 0 bytes free S:\> Now which line or lines need to be changed? Do I really have to change drive letter Z: to C:? Proposed solutions Solution #1 Ramhound proposed to change the boot order to following; CD-ROM, IDE-0, Floppy This didn't help. In fact, here is the result of it. Searching for Boot Record from CDROM..Not Found Searching for Boot Record from IDE-0.. OK Missing operating system Any other ideas?... Solution #2 Rik proposed to run Z:\setup. Now that I have found a way to drop to DOS prompt with Ctrl+C as described above (Update 2), I did try running setup but there is no such command or file in there. So that didn't work.

Read the article
Installing drivers for switchable graphics

- by Anonymous

I recently bought a laptop that came with Windows 7 64-bit installed. I have some older (16-bit and 32-bit) software that doesn't work with 64-bit Windows, but works just fine with 32-bit. Since I also wanted to get rid of all of the pre-installed spam, I decided to wipe the hard drive and install a fresh copy of Windows 7 32-bit. I can't get the graphics cards working. This laptop uses switchable graphics, an Intel card and a Radeon card. I first tried installing this driver from Intel, which works for the Intel card. Of course, the Radeon card doesn't work with this driver and I need it for some of the newer games I have. I also tried this driver. Windows's device manager will recognize the Radeon card, but it will still use the Intel card. Also, even though that package says it contains the Intel driver, the Intel card still isn't properly recognized by Windows (leaving me with a nasty 800x600 resolution). On top of that, the Catalyst Control Center won't open (saying "The Catalyst Control Center is not supported by the driver version of your enabled graphics adapter") I tried installing HP's driver then installing Intel's driver on top of it. Device manager will then recognize both graphics cards properly. However, the laptop still uses the Intel card. The CCC still won't start (saying the same thing as before) and I can't find any of 'switching' graphics cards. Before formatting, I could right-click the desktop and click "Configure Switchable Graphics" This option hasn't been in the context menu regardless of what driver(s) I've installed. After some research, I found out that this menu entry runs the command "cli.exe Start PowerXpressHybrid" I've tried manually running this command, but I get the same unsupported message from CCC. So, does anyone know how I can get this working? I would like to be able to switch between the Intel and Radeon. But, if there's some way to disable the Intel and use only the Radeon, that would be fine I dual-boot with Linux (framebuffer uses the Intel, haven't even tried getting X set up yet) Here's the output of lspci # lspci -v | grep VGA 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) (prog-if 00 [VGA controller]) 01:00.0 VGA compatible controller: ATI Technologies Inc NI Seymour [AMD Radeon HD 6470M] (prog-if 00 [VGA controller]) The laptop is a HP Pavilion g6t-1d00. HP doesn't support installing anything but Windows 7 64-bit, so calling tech support isn't an option. Thanks for any help UPDATE: I finally got it working. After a fresh install of Windows 7, I installed the HP driver (the one linked above). Then, there's an optional Windows update I installed (don't remember the exact name, but it'll stick out). After that, graphics switching works just like it's supposed to. Moab, thanks anyways for your help

Read the article
Why can't I play DVDs on Windows 8 Pro with Media Center Pack?

- by ligos

I have a laptop with Windows 8 Pro with Media Center (64 bit), but neither Media Player or Media Center can play DVDs. Have I done something wrong? Did the Feature Pack not install correctly? Should this work? Can I somehow uninstall and reinstall the Media Pack? Details So I upgraded by Windows 7 Home Premium laptop to Windows 8 Pro based on Microsoft's low pricing. I also grabbed my free upgrade to Media Pack and followed the instructions on that page to add my feature pack. Alas! I still cannot play DVDs via either Media Center or Player. Various Context Thinking I might need to re-install the pack, I found that I could no longer add any more feature packs (searching for add features settings only shows Turn Windows Features On and Off). Media Centre and Media Player are both enabled in Windows Features. I cannot see any way to remove or downgrade from the Media Pack, nor to add any more feature packs. I installed a codec pack (32bit) from Shark007, which has not allowed me to play DVDs (although did allow me to play various other media files). Media Player can play DTV recorded on another Windows 7 box, but Media Center cannot. VLC plays DVDs OK, but I'd prefer to figure out what the root cause of this problem is. There were no errors or other indications that the Media Pack failed to install; the installation itself was quite smooth. Although I have not checked my event log in detail. Before upgrading to Windows 7, I could play DVDs OK. Screenshots System Information, showing I have Windows 8 Pro with Media Center When playing a DVD, Media Player gives and error: The selected file has an extension that is not recognised by windows... When you click Yes, it fails saying: Windows Media Player cannot find the file... Media Center says: The file type is not recognisd and cannot be played, along with some codec related stuff. I can browse the files OK via My Computer on any video DVD.

Read the article
Error codes 80070490 and 8024200D in Windows Update

- by Sammy

How do get past these stupid errors? The way I have set things up is that Windows Update tells me when there are new updates available and then I review them before installing them. Yesterday it told me that there were 11 new updates. So I reviewed them and I saw that about half of them were security updates for Vista x64 and .NET Framework 2.0 SP2, and half of them were just regular updates for Vista x64. I checked them all and hit the Install button. It seemed to work at first, updates were being downloaded and installed, but then at update 11 of 11 total it got stuck and gave me the two error codes you see in the title. Here are some screenshots to give you an idea of what it looks like. This is what it looks like when it presents the updates to me. This is how it looks like when the installation fails. I'm not sure if you're gonna see this very well but these are the updates it's trying to install. Update: This is on Windows Vista Ultimate 64-bit with integrated SP2, installed only two weeks ago on 2012-10-02. Aside from this, the install is working flawlessly. I have not done any major changes to the system like installing new devices or drivers. What I have tried so far: - I tried installing the System Update Readiness Tool (the correct one for Vista x64) from Microsoft. This did not solve the issue. Microsoft resource links: Solutions to 80070490 Windows Update error 80070490 System Update Readiness Tool fixes Windows Update errors in Windows 7, Windows Vista, Windows Server 2008 R2, and Windows Server 2008 Solutions to 8024200D: Windows Update error 8024200d Essentially both solutions tell you to install the System Update Readiness Tool for your system. As I have done so and it didn't solve the problem the next step would be to try to repair Windows. Before I do that, is there anything else I can try? Microsoft automatic troubleshooter If I click the automatic troubleshooter link available on the solution web page above it directs me to download a file called windowsupdate.diagcab. But after download this file is not associated to any Windows program. Is this the so called Microsoft Fix It program? It doesn't have its icon, it's just blank file. Does it need to be associated? And to what Windows program?

Read the article
vagrant up command very slow on OS X Lion

- by Andy Hume

When I run vagrant up to provision a new VM on Lion it takes an extremely long time, during which the entire Mac is very laggy and unresponsive. The output is as follows, the key point being the "notice: Finished catalog run in 754.28 seconds" > vagrant up [default] Importing base box 'lucid64'... [default] The guest additions on this VM do not match the install version of VirtualBox! This may cause things such as forwarded ports, shared folders, and more to not work properly. If any of those things fail on this machine, please update the guest additions and repackage the box. Guest Additions Version: 4.1.0 VirtualBox Version: 4.1.6 [default] Matching MAC address for NAT networking... [default] Clearing any previously set forwarded ports... [default] Forwarding ports... [default] -- ssh: 22 => 2222 (adapter 1) [default] -- web: 80 => 4567 (adapter 1) [default] Creating shared folders metadata... [default] Running any VM customizations... [default] Booting VM... [default] Waiting for VM to boot. This can take a few minutes. [default] VM booted and ready for use! [default] Mounting shared folders... [default] -- v-root: /vagrant [default] -- v-data: /var/www [default] -- manifests: /tmp/vagrant-puppet/manifests [default] Running provisioner: Vagrant::Provisioners::Puppet... [default] Running Puppet with lucid64.pp... [default] stdin: is not a tty [default] notice: /Stage[main]/Lucid64/Exec[apt-update]/returns: executed successfully [default] [default] notice: /Stage[main]/Lucid64/Package[apache2]/ensure: ensure changed 'purged' to 'present' [default] [default] notice: /Stage[main]/Lucid64/File[/etc/motd]/ensure: defined content as '{md5}a25e31ba9b8489da9cd5751c447a1741' [default] [default] notice: Finished catalog run in 754.28 seconds [default] [default] err: /File[/var/lib/puppet/rrd]/ensure: change from absent to directory failed: Could not find group puppet [default] [default] err: Could not send report: Got 1 failure(s) while initializing: change from absent to directory failed: Could not find group puppet [default] [default] Running provisioner: Vagrant::Provisioners::Puppet... [default] Running Puppet with lucid64.pp... [default] stdin: is not a tty [default] notice: /Stage[main]/Lucid64/Exec[apt-update]/returns: executed successfully [default] [default] notice: Finished catalog run in 2.05 seconds [default] [default] err: /File[/var/lib/puppet/rrd]: Could not evaluate: Could not find group puppet [default] [default] err: Could not send report: Got 1 failure(s) while initializing: Could not evaluate: Could not find group puppet [default] [default] Running provisioner: Vagrant::Provisioners::Puppet... [default] Running Puppet with lucid64.pp... [default] stdin: is not a tty [default] notice: /Stage[main]/Lucid64/Exec[apt-update]/returns: executed successfully [default] [default] notice: Finished catalog run in 1.36 seconds [default] [default] err: /File[/var/lib/puppet/rrd]: Could not evaluate: Could not find group puppet [default] [default] err: Could not send report: Got 1 failure(s) while initializing: Could not evaluate: Could not find group puppet [default] >

Read the article
Windows Question: RunOnce/Second Boot Issues

- by Greg

I am attempting to create a Windows XP SP3 image that will run my application on Second Boot. Here is the intended workflow. 1) Run Image Prep Utility (I wrote) on windows to add my runonce entries and clean a few things up. 2) Reboot to ghost, make image file. 3) Package into my ISO and distribute. 4) System will be imaged by user. 5) On first boot, I have about 5 things that run, one of which includes a driver updater (I wrote) for my own specific devices. 6) One of the entries inside of HKCU/../runonce is a reg file, which adds another key to HKLM/../runonce. This is how second boot is acquired. 7) As a result of the driver updater, user is prompted to reboot. 8) My application is then launched from HKLM/../runonce on second boot. This workflow works perfectly, except for a select few legacy systems that contain devices that cause the add hardware wizard to pop up. When the add hardware wizard pops up is when I begin to see problems. It's important to note, that if I manually inspect the registry after the add hardware wizard pops up, it appears as I would expect, with all the first boot scripts having run, and it's sitting in a state I would correctly expect it to be in for a second boot scenario. The problem comes when I click next on the add hardware wizard, it seems to re-run the single entry I've added, and re-executes the runonce scripts. (only one script now as it's already executed and cleared out the initial entries). This causes my application to open as if it were a second boot, only when next is clicked on the add hardware wizard. If I click cancel, and reboot, then it also works as expected. I don't care as much about other solutions, because I could design a system that doesn't fully rely on Microsoft's registry. I simply can't find any information as to WHY this is happening. I believe this is some type of Microsoft issue that's presenting itself as a result of an overstretched image that's expected to support too many legacy platforms, but any help that can be provided would be appreciated. Thanks,

Read the article
backup and restoration of a freeipa infrastructure

- by Sirex

I'm finding the documentation on ipa server backup and restoration sadly lacking, and being so centrally critical it's not something i'm really happy about shooting in the dark with - could some kind soul more knowledable in the matter please attempt to provide an idiot-proof guide to backing up and restoring of IPA server(s) ? Particularly the main server (the cert signing one). ...We're looking towards rolling out ipa in a two server setup (1 master, 1 replica). I'm using dns srv records to handle failover, hence a loss of the replica isn't a big deal as i could make a new one and force a resync to happen - it's losing the master that bothered me. The thing that i'm really struggling with is locating a step-by-step procedure for backing up and restoring the master server. I'm aware that whole-VM snapshot is the recommended way of doing IPA server backup, but that isn't an option at this time for us. I'm also aware that freeipa 3.2.0 includes some sort of backup command build in, but that isn't in the ipa version of centos, and i don't expect it will be for some time yet. I've been trying many different methods, but none of them seem to restore cleanly, amongst others, i've tried; a command similar to db2ldif.pl -D "cn=directory manager" -w - -n userroot -a /root/userroot.ldif the script from here to produce three ldif files -- one for the domain ({domain}-userroot), and two for the ipa server (ipa-ipaca and ipa-userroot): Most of the restores i've tried have been similar to the form of: ldif2db.pl -D "cn=directory manager" -w - -n userroot -i userroot.ldif which seems to work and reports no errors, but totally borks the ipa install on the machine and i can no longer login with either the admin password on the backed up server, or the one i set it to on installation before attempting the ldif2db command (i'm installing ipa-server and running ipa-server-install, then attempting the restore). I'm not overly bothered about losing the CA, having to rejoin the domain, losing replication etc etc (although it'd be awesome if that could be avoided) but in the instance of the main server dropping i'd really like to avoid having to re-enter all the user/group information. I guess in the instance of losing the main server i could promote the other one and replicate in the other direction, but i've not tried that, either. Has anyone done that ? tl;dr: Can someone provide an idiots guide to backing up and restoring an IPA server (preferably on CentOS 6) in a clear enough way that'd make me feel confident it'll actually work when the dreaded time comes ? Crayons are optional, but appreciated ;-) I can't be the only person struggling with this, seeing how widely used IPA is, surely ?

Read the article
How can I troubleshoot a "Hardware Malfunction" blue screen?

- by AaronSieb

My computer has suddenly started crashing to a blue screen with the following text: hardware malfunction call your hardware vendor for support *the system has halted* The crash occurs randomly during normal use. I have thus far always been able to reproduce it by transferring the contents of a large folder... But I'm not sure if this is caused by the file transfer, or simply because the transfer takes long enough for something else to trigger it. A bit about my hardware I have an dual core Intel CPU, and Asus motherboard. Video card is by nVidia, and connects via PCIe. My hard drives are in pairs, and connect via SATA to a RAID controller on the motherboard. They are configured to use a RAID0 configuration. What I've tried so far There is nothing in the Windows Event Log. WhoCrashed was unable to find any crash records. ScanDisk runs to completion (it launches prior to Windows load) and reports no errors. MemTest reports no errors (to 200% coverage). System temperatures are in the range of 40 to 50 degrees Celsius, with video card temperatures in the range of 60 to eighty degrees Celsius. I have stripped the system down to a minimal configuration (hard drive, video card, one memory module, motherboard, CPU, power supply). The problem still occurrs. However, this has allowed me to rule out a few components: It is not the video card because the problem still occurred after replacing the video card another one I had on hand. It is not the hard drive or anything software related because the problem occurred after a fresh installation of Windows on a replacement hard drive. It is not the hard drive cables because I replaced those with new ones and still had the problem. It is not the power supply because the problem still occurred after replacing the power supply with another one I had on hand. It is probably not the memory because I've tried three different memory modules in three different memory slots and was still able to replicate the issue. Is there anything I can do to confirm what's causing the issue? At the moment it seems as though it must be either the motherboard or CPU, but those are both difficult components to replace... In addition, both components are relatively new (two to three years old). I will gladly edit in any additional information I can get my hands on, and/or focus the question as I can find more details...

Read the article
Can't get Passwordless (SSH provided) SFTP working

- by Shoaibi

I have chrooted sftp setup as below. # Package generated configuration file # See the sshd_config(5) manpage for details # What ports, IPs and protocols we listen for Port 22 # Use these options to restrict which interfaces/protocols sshd will bind to #ListenAddress :: #ListenAddress 0.0.0.0 Protocol 2 # HostKeys for protocol version 2 HostKey /etc/ssh/ssh_host_rsa_key HostKey /etc/ssh/ssh_host_dsa_key #Privilege Separation is turned on for security UsePrivilegeSeparation yes # Lifetime and size of ephemeral version 1 server key KeyRegenerationInterval 3600 ServerKeyBits 768 # Logging SyslogFacility AUTH LogLevel INFO # Authentication: LoginGraceTime 120 PermitRootLogin without-password StrictModes yes AllowGroups admins clients RSAAuthentication yes PubkeyAuthentication yes #AuthorizedKeysFile %h/.ssh/authorized_keys # Don't read the user's ~/.rhosts and ~/.shosts files IgnoreRhosts yes # For this to work you will also need host keys in /etc/ssh_known_hosts RhostsRSAAuthentication no # similar for protocol version 2 HostbasedAuthentication no # Uncomment if you don't trust ~/.ssh/known_hosts for RhostsRSAAuthentication #IgnoreUserKnownHosts yes # To enable empty passwords, change to yes (NOT RECOMMENDED) PermitEmptyPasswords no # Change to yes to enable challenge-response passwords (beware issues with # some PAM modules and threads) ChallengeResponseAuthentication no # Change to no to disable tunnelled clear text passwords #PasswordAuthentication yes # Kerberos options #KerberosAuthentication no #KerberosGetAFSToken no #KerberosOrLocalPasswd yes #KerberosTicketCleanup yes # GSSAPI options #GSSAPIAuthentication no #GSSAPICleanupCredentials yes X11Forwarding yes X11DisplayOffset 10 PrintMotd no PrintLastLog yes TCPKeepAlive yes #UseLogin no #MaxStartups 10:30:60 #Banner /etc/issue.net # Allow client to pass locale environment variables AcceptEnv LANG LC_* #Subsystem sftp /usr/lib/openssh/sftp-server # Set this to 'yes' to enable PAM authentication, account processing, # and session processing. If this is enabled, PAM authentication will # be allowed through the ChallengeResponseAuthentication and # PasswordAuthentication. Depending on your PAM configuration, # PAM authentication via ChallengeResponseAuthentication may bypass # the setting of "PermitRootLogin without-password". # If you just want the PAM account and session checks to run without # PAM authentication, then enable this but set PasswordAuthentication # and ChallengeResponseAuthentication to 'no'. UsePAM yes Subsystem sftp internal-sftp Match group clients ChrootDirectory /var/chroot-home X11Forwarding no AllowTcpForwarding no ForceCommand internal-sftp a dummy user root:~# tail -n1 /etc/passwd david:x:1000:1001::/david:/bin/sh Now in this case david can sftp using say filezilla client and he is chrooted to /var/chroot-home/david/. But what if i was to setup a passwordless auth? I have tried pasting his key in /var/chroot-home/david/.ssh/authorized_keys but no use, tried ssh'ing as david to the box and it just stops at "debug1: Sending env LC_CTYPE = C" after i supply it password and there is nothing shown in auth.log, may be because it can't find the homedir. If i do "su - david" as root i see "No directory, logging in with HOME=/" which makes sense. Symlink doesn't help either. I have also tried with: Match group clients ChrootDirectory /var/chroot-home/%u X11Forwarding no AllowTcpForwarding no ForceCommand internal-sftp a dummy user root:~# tail -n1 /etc/passwd david:x:1000:1001::/var/chroot-home/david:/bin/sh This way if i don't change /var/chroot-home/david to root:root sshd complains about bad ownership or permission modes, and if i do, david can no longer upload/delete anything directly in his home while using sftp from filezilla.

Read the article
Error Installing ruby with RVM Single User mode on Arch Linux

- by ChrisBurnor

I've just installed RVM on ArchLinux x64 in single user mode via the recommended install script curl -L https://get.rvm.io | bash -s stable I've also installed all the requirements listed in rvm requirements However, I'm having trouble actually installing any version of ruby. And getting the following error: arch:~ % rvm install 1.9.3 No binary rubies available for: ///ruby-1.9.3-p194. Continuing with compilation. Please read 'rvm mount' to get more information on binary rubies. Fetching yaml-0.1.4.tar.gz to /home/christopher/.rvm/archives % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 100 460k 100 460k 0 0 702k 0 --:--:-- --:--:-- --:--:-- 767k Extracting yaml-0.1.4.tar.gz to /home/christopher/.rvm/src Prepare yaml in /home/christopher/.rvm/src/yaml-0.1.4. Configuring yaml in /home/christopher/.rvm/src/yaml-0.1.4. Error running ' ./configure --prefix=/home/christopher/.rvm/usr ', please read /home/christopher/.rvm/log/ruby-1.9.3-p194/yaml/configure.log Compiling yaml in /home/christopher/.rvm/src/yaml-0.1.4. Error running 'make', please read /home/christopher/.rvm/log/ruby-1.9.3-p194/yaml/make.log Please note that it's required to reinstall all rubies: rvm reinstall all --force Installing Ruby from source to: /home/christopher/.rvm/rubies/ruby-1.9.3-p194, this may take a while depending on your cpu(s)... ruby-1.9.3-p194 - #downloading ruby-1.9.3-p194, this may take a while depending on your connection... ruby-1.9.3-p194 - #extracting ruby-1.9.3-p194 to /home/christopher/.rvm/src/ruby-1.9.3-p194 ruby-1.9.3-p194 - #extracted to /home/christopher/.rvm/src/ruby-1.9.3-p194 Skipping configure step, 'configure' does not exist, did autoreconf not run successfully? ruby-1.9.3-p194 - #compiling Error running 'make', please read /home/christopher/.rvm/log/ruby-1.9.3-p194/make.log There has been an error while running make. Halting the installation. The log files are as follows: arch:~ % cat ~/.rvm/log/ruby-1.9.3-p194/yaml/configure.log __rvm_log_command:32: permission denied: arch:~ % cat ~/.rvm/log/ruby-1.9.3-p194/yaml/make.log make: *** No targets specified and no makefile found. Stop. arch:~ % cat ~/.rvm/log/ruby-1.9.3-p194/make.log make: *** No targets specified and no makefile found. Stop.

Read the article
Magento - Users unable to login from corporate networks with Bluecoat / F5 Load balancers

- by user1330440

Hoping someone has come across this issue before with Magento and corporate clients. We have two clients for our Magento site who both have their internal networks setup using bluecoat security devices and F5 load balancers. Some users within these networks are unable to login to Magento - Magento eventually is sending a 302 redirect to /index.php/ when users attempt to log in. Through our testing, the problem appears to be isolated to this setup - we can log into the accounts in question from anywhere outside of these networks without issue, and if the client tries to access the site without going through the F5 load balancer, they are able to log in successfully. Strangely enough, the issue only started occurring for the two sites the day after we introduced a system upgrade which added a new site to the Magento installation. The system upgrade should not have affected any standard login functionality, and as said, the problem does not appear to be with the users in question, but with where the users are accessing the site from. Initially we thought the issue might have something to do with communications between the client's networks and the network which the server was hosted on, so we've tried moving the server to different hosts, but this has not helped. I'm currently waiting for more info from the clients on exact devices / models used in their network setup. I will update this post if more information becomes avaliable. Magento version is enterprise edition of ver. 1.9.0.0 Does anyone know of any tucked away Magento settings that might be able to cause this kind of behavior? Experience with this kind of set-up and ideas for things to look at? All help and ideas for things to follow-up would be appreciated - as this is a current production issue for a large number of users. I will respond asap with any requests for additional information on the topic, but currently am not able to disclose any identifying information on the project in question, and/or the clients experiencing issues. Thanks in advance for any assistance offered :) Note: This question has also been posted on the Magento forums: http://www.magentocommerce.com/boards/viewthread/277917/ And also on Stack overflow (Moved here as a commenter thought this site may be better suited): http://stackoverflow.com/questions/10133978/magento-users-unable-to-login-from-corporate-networks-with-bluecoat-f5-load

Read the article
What is a good method to solve cabal install problems?

- by sp3ctum

I've used the cabal package manager for Haskell programs to install libraries and new projects that I've cloned from some repositories. More often than not, I keep running into problems. Most projects make installing them seem super easy, but in my case that's not always true - sometimes they are very hard to get running. Some are so hard, in fact, that I've lost interest in the project solely because of not being able to install it. So instead of complaining, I'd like to ask what I should do to better this situation. I'd like to use my most recent problem as an example. I'm interested in trying out the Gitit project. It's a promising looking personal wiki that runs on various version control systems. So here's what I've done: Clone from Github run cabal install in the project directory like I'm told on the project install page: mika@eka:~/git/gitit$ ls BLUETRIP-LICENSE CHANGES HCAR-gitit.tex LICENSE Network README.markdown RELANN-0.6.1 Setup.lhs TANGOICONS YUI-LICENSE data expireGititCache.hs gitit.cabal gitit.hs plugins mika@eka:~/git/gitit$ cabal install Resolving dependencies... cabal: cannot configure happstack-server-7.0.7. It requires base64-bytestring ==1.0.* For the dependency on base64-bytestring ==1.0.* there are these packages: base64-bytestring-1.0.0.0. However none of them are available. base64-bytestring-1.0.0.0 was excluded because gitit-0.10 requires base64-bytestring ==0.1.* mika@eka:~/git/gitit$ So now I'm thinking: well, I'll install happstack-server on its own, maybe that will work: mika@eka:~/git/gitit$ cabal install happstack-server Resolving dependencies... Warning: happstack-server.cabal: Ignoring unknown section type: test-suite Configuring happstack-server-7.0.7... cabal: At least the following dependencies are missing: blaze-html ==0.5.*, hslogger >=1.0.2, monad-control ==0.3.*, network >=2.2.3, sendfile >=0.7.1 && <0.8, system-filepath >=0.3.1, text >=0.10 && <0.12, threads >=0.5, transformers-base ==0.4.* cabal: Error: some packages failed to install: happstack-server-7.0.7 failed during the configure step. The exception was: ExitFailure 1 So looks like there are some dependencies missing. But isn't installing these dependencies the whole point of using cabal in the first place? What should I do? File bug reports (to which project?), install the dependencies manually or something else? Bonus points for explaining what causes these kinds of problems.

Read the article
can not connect through SCP, but SSH connections works

- by Joe Cabezas

i am trying to connect to my server to transfer file using scp: $ scp -v -r -P <port> <user>@<host>:~/dir/ dir/ this is the output: OpenSSH_5.2p1, OpenSSL 0.9.8r 8 Feb 2011 debug1: Reading configuration data /Users/joe/.ssh/config debug1: Reading configuration data /etc/ssh_config debug1: Connecting to <host> [<host>] port <port>. debug1: Connection established. debug1: identity file /Users/joe/.ssh/identity type -1 debug1: identity file /Users/joe/.ssh/id_rsa type -1 debug1: identity file /Users/joe/.ssh/id_dsa type -1 ssh_exchange_identification: Connection closed by remote host but connecting via SSH works fine: $ ssh <user>@<host> -p <port> <user>@<host>'s password: <user>@<host>:~$ OK what can be wrong with this? my /etc/ssh/sshd_config file on the host is: # Package generated configuration file # See the sshd_config(5) manpage for details # What ports, IPs and protocols we listen for Port <port> # Use these options to restrict which interfaces/protocols sshd will bind to #ListenAddress :: #ListenAddress 0.0.0.0 Protocol 2 # HostKeys for protocol version 2 HostKey /etc/ssh/ssh_host_rsa_key HostKey /etc/ssh/ssh_host_dsa_key HostKey /etc/ssh/ssh_host_ecdsa_key #Privilege Separation is turned on for security UsePrivilegeSeparation yes # Lifetime and size of ephemeral version 1 server key KeyRegenerationInterval 3600 ServerKeyBits 768 # Logging SyslogFacility AUTH LogLevel INFO # Authentication: LoginGraceTime 120 PermitRootLogin yes StrictModes yes RSAAuthentication yes PubkeyAuthentication no #AuthorizedKeysFile %h/.ssh/authorized_keys # Don't read the user's ~/.rhosts and ~/.shosts files IgnoreRhosts yes # For this to work you will also need host keys in /etc/ssh_known_hosts RhostsRSAAuthentication no # similar for protocol version 2 HostbasedAuthentication no # Uncomment if you don't trust ~/.ssh/known_hosts for RhostsRSAAuthentication #IgnoreUserKnownHosts yes # To enable empty passwords, change to yes (NOT RECOMMENDED) PermitEmptyPasswords no # Change to yes to enable challenge-response passwords (beware issues with # some PAM modules and threads) ChallengeResponseAuthentication no # Change to no to disable tunnelled clear text passwords #PasswordAuthentication yes # Kerberos options #KerberosAuthentication no #KerberosGetAFSToken no #KerberosOrLocalPasswd yes #KerberosTicketCleanup yes # GSSAPI options #GSSAPIAuthentication no #GSSAPICleanupCredentials yes X11Forwarding yes X11DisplayOffset 10 PrintMotd no PrintLastLog yes TCPKeepAlive yes #UseLogin no #MaxStartups 10:30:60 #Banner /etc/issue.net # Allow client to pass locale environment variables AcceptEnv LANG LC_* Subsystem sftp /usr/lib/openssh/sftp-server # Set this to 'yes' to enable PAM authentication, account processing, # and session processing. If this is enabled, PAM authentication will # be allowed through the ChallengeResponseAuthentication and # PasswordAuthentication. Depending on your PAM configuration, # PAM authentication via ChallengeResponseAuthentication may bypass # the setting of "PermitRootLogin without-password". # If you just want the PAM account and session checks to run without # PAM authentication, then enable this but set PasswordAuthentication # and ChallengeResponseAuthentication to 'no'. UsePAM yes

Read the article
NRPE Warning threshold must be a positive integer

- by Frida

OS: Ubuntu 12.10 Server 64bits I've installed Icinga, with ido2db, pnp4nagios and icinga-web (last release, following the instruction given in the documentation, installation with apt, etc). I am using icinga-web to monitor my hosts. For the moment, I have just my localhost, and all is perfect. I am trying to add a host and monitor it with NRPE (version 2.12): root@server:/etc/icinga# /usr/lib/nagios/plugins/check_nrpe -H client NRPE v2.12 The configuration looks good. I've created a file in /etc/icinga/objects/client.cfg as below on the server: root@server:/etc/icinga/objects# cat client.cfg define host{ use generic-host ; Name of host template to use host_name client alias client.toto address xx.xx.xx.xx } # Service Definitions define service{ use generic-service host_name client service_description CPU Load check_command check_nrpe_1arg!check_load } define service{ use generic-service host_name client service_description Number of Users check_command check_nrpe_1arg!check_users } And add in my /etc/icinga/commands.cfg: # this command runs a program $ARG1$ with no arguments define command { command_name check_nrpe command_line /usr/lib/nagios/plugins/check_nrpe -H $HOSTADDRESS$ -c $ARG1$ -a $ARG2$ } # this command runs a program $ARG1$ with no arguments define command { command_name check_nrpe_1arg command_line /usr/lib/nagios/plugins/check_nrpe -H $HOSTADDRESS$ -c $ARG1$ } But it does not work. These are the logs from the client: Dec 3 19:45:12 client nrpe[604]: Connection from xx.xx.xx.xx port 32641 Dec 3 19:45:12 client nrpe[604]: Host address is in allowed_hosts Dec 3 19:45:12 client nrpe[604]: Handling the connection... Dec 3 19:45:12 client nrpe[604]: Host is asking for command 'check_users' to be run... Dec 3 19:45:12 client nrpe[604]: Running command: /usr/lib/nagios/plugins/check_users -w -c Dec 3 19:45:12 client nrpe[604]: Command completed with return code 3 and output: check_users: Warning t hreshold must be a positive integer#012Usage:check_users -w -c Dec 3 19:45:12 client nrpe[604]: Return Code: 3, Output: check_users: Warning threshold must be a positive integer#012Usage:check_users -w -c Dec 3 19:44:49 client nrpe[32582]: Connection from xx.xx.xx.xx port 32129 Dec 3 19:44:49 client nrpe[32582]: Host address is in allowed_hosts Dec 3 19:44:49 client nrpe[32582]: Handling the connection... Dec 3 19:44:49 client nrpe[32582]: Host is asking for command 'check_load' to be run... Dec 3 19:44:49 client nrpe[32582]: Running command: /usr/lib/nagios/plugins/check_load -w -c Dec 3 19:44:49 client nrpe[32582]: Command completed with return code 3 and output: Warning threshold mu st be float or float triplet!#012#012Usage:check_load [-r] -w WLOAD1,WLOAD5,WLOAD15 -c CLOAD1,CLOAD5,CLO AD15 Dec 3 19:44:49 client nrpe[32582]: Return Code: 3, Output: Warning threshold must be float or float trip let!#012#012Usage:check_load [-r] -w WLOAD1,WLOAD5,WLOAD15 -c CLOAD1,CLOAD5,CLOAD15 Dec 3 19:44:49 client nrpe[32582]: Connection from xx.xx.xx.xx closed. Have you any ideas?

Read the article
Virtual Network Interface and NAT disables localhost access for MySQL and Apache

- by Interarticle

I'm running an Ubuntu Server 12.04, and recently I configured it to do NAT for my laptop. Since the server has only one NIC, I followed instructions online to create a virtual network device (eth0:0) that has a LAN IP address, then further configured iptables and UFW to allow internet sharing. However, just a few days ago, I discovered that one of the PHP pages hosted on the server failed for no apparent reason. A little digging revealed that the MySQL server started refusing connections from localhost. The same happened with a page (PhpMyAdmin) that was configured to be accessible only from localhost (in Apache2). The error, as shown by $mysql --protocol=tcp -u root -p looks like ERROR 1130 (HY000): Host '<host name of eth0>' is not allowed to connect to this MySQL server However, the funny thing is, I configured the mysql server to allow root access from localhost (only). Moreover, the mysql server listens only on 127.0.0.1:3306, as shown by: sudo netstat -npa | head Active Internet connections (servers and established) Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name tcp 0 0 127.0.0.1:3306 0.0.0.0:* LISTEN 1029/mysqld which means that the connection could have only come from 127.0.0.1 (Note that MySQL is working because I can still connect to it via unix domain sockets) In effect, it seems that all tcp connections originating from 127.0.0.1 to 127.0.0.1 appear to any local daemon to come from the eth0 IP address. Indeed, apache2 allowed me to access PhpMyAdmin after I added allow <eth0 IP address>. The following are my network configurations (redacted): /etc/hosts: 127.0.0.1 localhost 211.x.x.x <host name of eth0> <server name> #IPv6 Defaults follows .... /etc/network/interfaces: auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 211.x.x.x netmask 255.255.255.0 gateway 211.x.x.x dns-nameservers 8.8.8.8 # dns-* options are implemented by the resolvconf package, if installed dns-search xxxxxxx.com hwaddress ether xx:xx:xx:xx:xx:xx auto eth0:0 iface eth0:0 inet static address 192.168.57.254 netmask 255.255.254.0 broadcast 192.168.57.255 network 192.168.57.0 /etc/ufw/sysctl.conf: #Uncommented the following lines net/ipv4/ip_forward=1 net/ipv6/conf/default/forwarding=1 /etc/default/ufw: DEFAULT_FORWARD_POLICY="ACCEPT" #Changed DROP to ACCEPT /etc/init/internet-sharing.conf (upstart script I wrote), section pre-start script: iptables -A FORWARD -o eth0 -i eth0:0 -s 192.168.57.22 -m conntrack --ctstate NEW -j ACCEPT iptables -A FORWARD -m conntrack --ctstate ESTABLISHED,RELATED -j ACCEPT iptables -A POSTROUTING -t nat -j MASQUERADE Note again that my problem here is that programs cannot access localhost tcp services, from the server itself, and that access is blocked because the services have access control allowing only 127.0.0.1. I have no problem connecting (as in TCP connections) to services via tcp, even if the services listen only on 127.0.0.1. I do NOT want to connect to the services from another computer.

Read the article
Supervisord appears to be running, but monitored programs aren't launched

- by Brad Montgomery

I've got supervisord 3.0a8 installed from the system package on ubuntu 10.04 (64bit). The supervisor service appears to be running, but it's not launching the configured programs. Interestingly enough, this exact configuration is running on another system, and is working as expected. The main config file looks like this: ; /etc/supervisor/supervisord.conf [unix_http_server] chmod=0700 file=/var/run/supervisor.sock [supervisord] logfile=/var/log/supervisor/supervisord.log childlogdir=/var/log/supervisor pidfile=/var/run/supervisord.pid [rpcinterface:supervisor] supervisor.rpcinterface_factory = supervisor.rpcinterface:make_main_rpcinterface [supervisorctl] serverurl=unix:///var/run/supervisor.sock [include] files = /etc/supervisor/conf.d/*.conf A sample program config looks like this: ; /etc/supervisor/conf.d/sample.conf [program:sample] directory=/opt/sample command=/opt/sample/run.sh Where, the /opt/sample/run.sh is: #!/bin/bash while true; do T=`date` echo "[$T] Running!" >> /var/log/sample.log sleep 1 done And, here's some additional information regarding the running instance of supervisord: root@myhost:~# supervisorctl version 3.0a8 root@myhost:~# which supervisorctl /usr/bin/supervisorctl root@myhost:~# which supervisord /usr/bin/supervisord root@myhost:~# supervisorctl status # NOTE that there's no output! root@myhost:~# supervisorctl avail root@myhost:~# service supervisor status is running root@myhost:~# ps aux | grep supervisor root 21740 0.1 0.4 40772 10056 ? Ss 11:28 0:00 /usr/bin/python /usr/bin/supervisord root 21749 0.0 0.0 7624 932 pts/2 S+ 11:28 0:00 grep --color=auto supervisor root@myhost:~# cat /var/log/supervisor/supervisord.log 2012-04-26 11:28:22,483 CRIT Supervisor running as root (no user in config file) 2012-04-26 11:28:22,536 INFO RPC interface 'supervisor' initialized 2012-04-26 11:28:22,536 WARN cElementTree not installed, using slower XML parser for XML-RPC 2012-04-26 11:28:22,536 CRIT Server 'unix_http_server' running without any HTTP authentication checking 2012-04-26 11:28:22,539 INFO daemonizing the supervisord process 2012-04-26 11:28:22,539 INFO supervisord started with pid 21740 root@myhost:~# ll /etc/supervisor/conf.d/ total 28 drwxr-xr-x 2 root root 4096 2012-04-26 11:31 ./ drwxr-xr-x 3 root root 4096 2012-04-25 18:38 ../ -rw-r--r-- 1 root root 66 2012-04-26 11:31 sample.conf root@myhost:~# ll /opt/sample/ total 12 drwxr-xr-x 2 root root 4096 2012-04-26 11:32 ./ drwxr-xr-x 4 root root 4096 2012-04-26 11:31 ../ -rwxr-xr-x 1 root root 97 2012-04-26 11:32 run.sh* root@myhost:~# python Python 2.6.5 (r265:79063, Apr 16 2010, 13:57:41) [GCC 4.4.3] on linux2 Type "help", "copyright", "credits" or "license" for more information. >>> Any help is greatly appreciated!

Read the article
Can you set up a gaming LAN using OpenVPN installed in a VMware guest OS and be playing the game on the host OS?

- by Coder

I would like to setup a gaming VPN. Ie. I have some games that work over LAN and would like to play them with people that are not on my LAN. I know I can do this with OpenVPN. My ultimate goal would be to run OpenVPN portably on my host OS and not even need any virtualization. As such i don't want to install it on my host, but i'm fine with running it portably. I'm even fine with temporarily adding registry keys, and then running a .reg file to remove these entries once i'm done. To this effect i have installed OpenVPN on a virtual machine and diffed the registry. I then manually (using a .reg file) added all the keys that seem important on my host OS and copied the installation folder of OpenVPN onto my host machine. Then i try to run openVPN GUI 1.0.3 as a test and it says "Error opening registy for reading (HKLM\SOFTWARE\OpenVPN). OpenVPN is probably not installed". I verified that that key is indeed in the registry with all subkeys and it looks correct. I have tried running the GUI as an administrator and in compatibility mode with no success. I am running Windows 7. If this fails then i would be happy with installing OpenVPN on a virtual machine in VMWare but they key is that i will be running the game installed on my host machine. The first question for this option is if this is even possible. The second is, that I can't get the VM to have internet access if I use bridging but i can if i use NAT. Is it possible to do this game VPN setup with VMWare guest OS running using NAT? Summary of questions: -Is it possible to run openVPN portably and if so what did i miss above? -If it's not possible to run it portably, then can setup a gaming LAN by installing OpenVPN in a guest OS with NAT and how can i do this? -If the above is not possible then can i install OpenVPN in a guest using bridging and if so how can i set this up with a Windows 7 host and Windows XP guest as currently i can't get the guest to be able to access the internet in bridging mode, but it working in NAT mode. -In general is there any good documentation on setting up a gaming LAN with OpenVPN (i am using 2.1.4) as i have never set up a VPN of any sort before so any help would be much appreciated. Thanks!

Read the article
Completely remove user account and create another with same name in Windows 7

- by TeaJay

Here's my question simply and then the details in case they help to get me an appropriate answer. Question: How can I completely and permanently delete a user account in Windows 7 so that I can create another one with the same user name without the computer name extension added, eg Jane Smith not Jane Smith.computer name? The details: I just did a clean install of Windows 7 Professional 32 bit. (My laptop crashed, I reinstalled Vista and restored backup files but things weren't working so I decided to just get Windows 7 since I had to start over anyway). I used Windows Easy Transfer to save just about everything, even customizing to include a user's appdata from Windows.old which was created when I reinstalled Vista -- not knowing that another windows.old file would be created with the installation of Windows 7. After installing Windows 7, I used Windows Easy Transfer to transfer the user file, appdata, to the new user account which I gave the same name (Jane Smith) in case having a different name would cause problems with reading files or something. Afterwards, I realized that I did not want ALL of that junk. So, I thought no problem, I'll just delete the user account I just created, nothing lost, and create another one this time transferring only the files I wanted (using the customize option in windows easy transfer). I wanted to keep the same user name, e.g. Jane Smith, so after I deleted the user account I checked the files, and I didn't see. It was late so I went to bed and the next morning I created a new user with that same name (Jane Smith). The files looked fine if I remember correctly. Meanwhile, I updated the computer and it restarted a couple times. As I was moving files to the "Jane Smith" user account file, things weren't working as they should. I was actually moving files to the deleted user account and that the current user account was named "Jane Smith.computer name" and that's where the files needed to go. I don't like this. It's too confusing. I want just "Jane Smith". How can I do this without just changing the user name (which doesn't change it in the file path etc)? I want the first one GONE. If I can't do this, is it a problem to create an account with another name and still transfer files to it without path or other problems? I hope this question makes sense and that someone can help me. Thank you in advance!

Read the article

Search Results

Search found 17808 results on 713 pages for 'installation package'.

Page 652/713 | < Previous Page | 648 649 650 651 652 653 654 655 656 657 658 659 | Next Page >

- by spockaroo

- by donatello

- by Kieran Benton

- by Kieran Benton

- by Jim Lynn

- by Journeyman Geek

- by Kossel

- by Sammy

- by Anonymous

- by ligos

- by Sammy

- by Andy Hume

- by Greg

- by Sirex

- by AaronSieb

- by Shoaibi

- by ChrisBurnor

- by user1330440

- by sp3ctum

- by Joe Cabezas

- by Frida

- by Interarticle

- by Brad Montgomery

- by Coder

- by TeaJay

< Previous Page | 648 649 650 651 652 653 654 655 656 657 658 659 | Next Page >