Search Results

Search found 21960 results on 879 pages for 'program termination'.

Page 652/879 | < Previous Page | 648 649 650 651 652 653 654 655 656 657 658 659  | Next Page >

• Testing a quadratic equation

  - by user1201587

  I'm doing a code testing for a program that calculate the results for a quadratic equation I need to have test data for the following situation, when a is not zero and d positive there is two possibilities which are in the code below, I need to find an example for the first satiation when Math.abs(b / a - 200.0) < 1.0e-4 , all the values that I have tried, excute the second one caption= "Two roots"; if (Math.abs(b / a - 200.0) < 1.0e-4) { System.out.println("first one"); x1 = (-100.0 * (1.0 + Math.sqrt(1.0 - 1.0 / (10000.0 * a)))); x2 = (-100.0 * (1.0 - Math.sqrt(1.0 - 1.0 / (10000.0 * a)))); } else { System.out.println("secrst one"); x1 = (-b - Math.sqrt(d)) / (2.0 * a); x2 = (-b + Math.sqrt(d)) / (2.0 * a); } } }

  Read the article

• Why is C++ fwrite() producing larger output in release?

  - by waffleShirt

  I recently wrote an implementation of the Canonical Huffman compression algorithm. I have a 500kb test file that can be compressed to about 250kb when running the debug and release builds from within Visual Studio 2008. However when I run the release build straight from the executeable the test file only compresses to about 330kb. I am assuming that something is going wrong when the file is written using fwrite(). I have tested the program and confirmed that uncompressing the files always produces the correct uncompressed file. Does anyone know why this could possibly be? How could the same executeable file be producing different sized outputs based on where it is launched from?

  Read the article

• C# TCP First Message Delay

  - by ikurtz

  greetings, i am writng a socket program using sockets in c# (asynchronous). the issue is, when a client connects to the server it kinda happens quiet fast. then.. when the first message is sent there is a delay in responding. this only happens to the very first data being sent over the connection. and boh client and server suffers from this behaviour. what is this delay? is there a way to get rid of this? many thanks.

  Read the article

• VC++ how to change a picturebox from header file

  - by JimboJones

  HI, Just ran into a problem. How to I change a picturebox's picture from within a different header file. If I do it in the same .h file as the Form I am working on I use: sq1-Image = bi; (which loads in a bitmap) but when I do it from another header (i've included the correct header file), I get "sq1 is an undeclared identifier" and "left of '-image' must point to a class/struct/union/generic" What I'm looking for is something like Form1::sq1-Image = bi; Basically I just want to point the program to change picturebox from another location....Is this possible? How can I do this? Cheers!

  Read the article

• Mimic Sublime Text multiselect in Notepad++ using autohotkey

  - by capnhud

  In sublime text 2 you can multi select(cursor) lines by holding ctrl+alt+arrow key (up/down). In notepad++ you can accomplish the same thing by holding ctrl and clicking the additional lines(areas) you would like to edit. I figured I could use a autohotkey script to accomplish the same functionality. So I tried #IfWinActive, ahk_class Notepad++ ^!Down::^Click but each time that I try to load the script I get Error at Line 2 Line Text: ^Click Error: This line does not contain a recognized action the program will exit then I tried #IfWinActive, ahk_class Notepad++ ^!Down::send ^Click but that shows up as ETXClick in notepad++ What more do I need to get this script to work only for Notepad++

  Read the article

• How Iostream file is located in computer by c++ code during execution

  - by user3702024

  i want to know that in a c++ code during execution how iostream file is founded. we write #include in c++ program and i know about #include which is a preprocessor directive to load files and is a file name but i don't know that how that file is located. i have some questions in my mind... Is Standard library present in compiler which we are using? Is that file is present in standard library or in our computer? Can we give directory path to locate the file through c++ code if yes then how?

  Read the article

• printing double in binary

  - by Happy Mittal

  In Thinking in C++ by Bruce eckel, there is a program given to print a double value in binary.(Chapter 3, page no. 189) int main(int argc, char* argv[]) { if(argc != 2) { cout << "Must provide a number" << endl; exit(1); } double d = atof(argv[1]); unsigned char* cp = reinterpret_cast<unsigned char*>(&d); for(int i = sizeof(double); i > 0 ; i -= 2) { printBinary(cp[i-1]); printBinary(cp[i]); } } Here while printing cp[i] when i=8(assuming double is of 8 bytes), wouldn't it be undefined behaviour? I mean this code doesn't work as it doesn't print cp[0].

  Read the article

• Data-only static libraries with GCC

  - by regularfry

  How can I make static libraries with only binary data, that is without any object code, and make that data available to a C program? Here's the build process and simplified code I'm trying to make work: ./datafile: abcdefghij Makefile: libdatafile.a: ar [magic] datafile main: libdatafile.a gcc main.c libdatafile.a -o main main.c: #define TEXTPTR [more magic] int main(){ char mystring[11]; memset(mystring, '\0', 11); memcpy(TEXTPTR, mystring, 10); puts(mystring); puts(mystring); return 0; } The output I'm expecting from running main is, of course: abcdefghijabcdefghij My question is: what should [magic] and [more magic] be?

  Read the article

• Help with understanding why UAC dialog pops up on Win7 for our application

  - by Tim

  We have a C++ unmanaged application that appears to cause a UAC prompt. It seems to happen on Win7 and NOT on Vista Unfortunately the UAC dlg is system modal so I can't attach a debugger to check in the code where it is, and running under msdev (we're using 2008) runs in elevated mode. We put a message box at the start of our program/winmain but it doesn't even get that far, so apparently this is in the startup code. What can cause a UAC notification so early and what other things can I do to track down the cause? EDIT Apparently the manifest is an important issue here, but it seems not to be helping me - or perhaps I am not configuring the manifest file correctly. Can someone provide a sample manifest? Also, does the linker/UAC magic figure out that the program "might" write to the registry and set its UAC requirements based on that? There are code paths that might trigger UAC, but we are not even at that point when the UAC dlg comes up. An additional oddity is that this does not seem to happen on Vista with UAC turned on. Here is a manifest (that I think is/was generated automatically): <?xml version='1.0' encoding='UTF-8' standalone='yes'?> <assembly xmlns='urn:schemas-microsoft-com:asm.v1' manifestVersion='1.0'> <trustInfo xmlns="urn:schemas-microsoft-com:asm.v3"> <security> <requestedPrivileges> <requestedExecutionLevel level='asInvoker' uiAccess='false' /> </requestedPrivileges> </security> </trustInfo> <dependency> <dependentAssembly> <assemblyIdentity type='win32' name='Microsoft.Windows.Common-Controls' version='6.0.0.0' processorArchitecture='*' publicKeyToken='6595b64144ccf1df' language='*' /> </dependentAssembly> </dependency> <dependency> <dependentAssembly> <assemblyIdentity type='win32' name='Microsoft.Windows.Common-Controls' version='6.0.0.0' processorArchitecture='x86' publicKeyToken='6595b64144ccf1df' language='*' /> </dependentAssembly> </dependency> </assembly> And then this one was added to the manifest list to see if it would help <?xml version="1.0" encoding="UTF-8" standalone="yes"?> <assembly xmlns="urn:schemas-microsoft-com:asm.v1" manifestVersion="1.0"> <assemblyIdentity version="1.0.0.0" processorArchitecture="x86" name="[removed for anonymity]" type="win32" /> <description> [removed for anonymity] </description> <dependency> <dependentAssembly> <assemblyIdentity type="win32" name="Microsoft.Windows.Common-Controls" version="6.0.0.0" processorArchitecture="x86" publicKeyToken="6595b64144ccf1df" language="*" /> </dependentAssembly> </dependency> <trustInfo xmlns="urn:schemas-microsoft-com:asm.v2"> <security> <requestedPrivileges> <requestedExecutionLevel level="asInvoker" uiAccess="false"/> </requestedPrivileges> </security> </trustInfo> </assembly> The following is from the actual EXE using the ManifestViewer tool - <assembly xmlns="urn:schemas-microsoft-com:asm.v1" manifestVersion="1.0"> <assemblyIdentity version="1.0.0.0" processorArchitecture="x86" name="[removed]" type="win32" /> <description>[removed]</description> - <dependency> - <dependentAssembly> <assemblyIdentity type="win32" name="Microsoft.Windows.Common-Controls" version="6.0.0.0" processorArchitecture="x86" publicKeyToken="6595b64144ccf1df" language="*" /> </dependentAssembly> </dependency> - <dependency> - <dependentAssembly> <assemblyIdentity type="win32" name="Microsoft.Windows.Common-Controls" version="6.0.0.0" processorArchitecture="*" publicKeyToken="6595b64144ccf1df" language="*" /> </dependentAssembly> </dependency> - <trustInfo xmlns="urn:schemas-microsoft-com:asm.v2"> - <security> - <requestedPrivileges> <requestedExecutionLevel level="asInvoker" uiAccess="false" /> </requestedPrivileges> </security> </trustInfo> </assembly> It appears that it might be due to the xp compatibility setting on our app. I'll have to test that. (we set that in the installer I found out because some sound drivers don't work correctly on win7)

  Read the article

• javascript popup reloads parent page -

  - by harry_T

  I have a popup function in a program that works well, be re-loads the parent page as it loads the child. Is there a way to prevent this behaviour. // popup window function function newPop(url, myWin, width, height, left, top, scrollbars) { parms = 'toolbar=yes, scrollbars=no, location=no, menubar=no, resizable=no, width= ' + width + ' , height=' + height + ' , left= ' + left + ' , top= ' + top + ' , titlebar=no , scrollbars = ' + scrollbars ; var newwin = window.open(url,myWin, parms); newwin.resizeTo(width,height); newwin.moveTo(0,0); newwin.moveTo(left,top); newwin.focus(); return false; }

  Read the article

• NoClassDefFoundError when running java tool under Xcode

  - by pancake

  Hi all, I'm trying to create a Java Tool by using Xcode. I've already changed my build.xml to have Xcode target java 1.6 and not 1.3 so I can use generics. I'm getting no build errors and using 'javac' and 'java' in the terminal works. Now I want it to work in Xcode as well. I keep getting the following error: Exception in thread "main" java.lang.NoClassDefFoundError: MyClass where 'MyClass' is the class containing the main method. It probably has something to do with the classpath, which as the build.xml prescribes is "${bin}". There is a bin folder in my project folder, and it contains all the .class files needed to run the program. If anybody could help me, it'd be great!

  Read the article

• Why won't this sql update query work?

  - by Wesley

  I have a table that has 5,000(table1) lines in it. Currently, 3,000 of them are filled up with data. The remaining values are currently null. In a separate table(table2), I have the remaining 2,000 rows of data. I am simply trying to take the values in table2 and put them in table1, but this statement isn't working: Update table1 Set field1 = (Select field1 From table2 Where table1.id = table2.id) Where Exists(Select field1 From table2 Where table1.id = table2.id) It looks like this should be working, but I am getting an error from Base, the db program I am using that just says error Near " ": syntax error...any help?? Thanks!

  Read the article

• NSFetchedResultsChangeInsert reported when only updates are taking place

  - by niblha

  I have a class that acts as a NSFetchedResultsControllerDelegate which is receiving messages to -(void)controller:didChangeObject:atIndexPath:forChangeType:newIndexPath: with change type NSFetchedResultsChangeInsert, but the actual object which is the subject has with certainty not been newly inserted, only updated. So I would expect to get a change message with type NSFetchedResultsChangeUpdate, should I not? If i check the value of isInserted on the object, it yields false (as expected from the logic in my program). So my question is, why is this reported as an insert when it is only a change/update? They only thing I can think of is that part of the changes that are taking place is that objects of another entity type are inserted with relationships to objects of the entity type that the NSFetchedResultsController is set up to fetch.

  Read the article

• C++ Segementation fault in binary_function

  - by noryb009

  I'm using Visual Studio 2010 Beta 2 (also tried with NetBeans), and I'm having a segmentation fault in the following code: // One of the @link s20_3_3_comparisons comparison functors@endlink. template <class _Tp> struct less : public binary_function<_Tp, _Tp, bool> { bool operator()(const _Tp& __x, const _Tp& __y) const { return __x < __y; } //this is the problem line }; I don't know what in my program calls it, but I am trying to find out. (I think it's a map) Does anyone know what to do, or has encountered this before?

  Read the article

• Why is TargetInvocationException treated as uncaught by the IDE?

  - by Jason Coyne

  I have some code that is using reflection to pull property values from an object. In some cases the properties may throw exceptions, because they have null references etc. try { child.Target = propertyInfo.GetValue(target, null); } catch (TargetInvocationException ex) { child.Target = ex.InnerException.Message; } catch (Exception ex) { child.Target = ex.Message; } Ultimately the code works correctly, however when I am running under the debugger : When the property throws an exception, the IDE drops into the debugger as if the exception was uncaught. If I just hit run, the program flows through and the exception comes out as a TargetInvocationException with the real exception in the InnerException property. How can I stop this from happening?

  Read the article

• Help with output generated by this C code using fork()

  - by Seephor

  I am trying to figure out the output for a block of C code using fork() and I am having some problems understanding why it comes out the way it does. I understand that when using fork() it starts another instance of the program in parallel and that the child instance will return 0. Could someone explain step by step the output to the block of code below? Thank you. main() { int status, i; for (i=0; i<2; ++i){ printf("At the top of pass %d\n", i); if (fork() == 0){ printf("this is a child, i=%d\n", i); } else { wait(&status); printf("This is a parent, i=%d\n", i); } } }

  Read the article

• Associate List<T>.Remove to an event in C#?

  - by Uri

  Hi guys, I have a Products:List<Product> class. I'd like to make it so that every time that I remove an item from that list, my program decreases a counter. Is there a way to do it without overriding the Remove method or decreasing it manually? And if there is none, anybody knows where I can find the code for the Remove method? Thanks! I thought about associating the Remove method to an event, but I don't know how to do it without overriding it or creating another method with the Remove method inside it. Excuse me for my ignorance, but I'm just getting into OOP programming.

  Read the article

• Is It Worth Using Bitwise Operators In Methods?

  - by user1626141

  I am very new to Java (and programming in general, my previous experience is with ActionScript 2.0 and some simple JavaScript), and I am working my way slowly and methodically through Java: A Beginner's Guide by Herbert Schildt. It is an incredible book. For one thing, I finally understand more-or-less what bitwise operators (which I first encountered in ActionScript 2.0) do, and that they are more efficient than other methods for certain sums. My question is, is it more efficient to use a method that uses, say, a shift right, to perform all your divisions/2 (or divisions/even) for you in a large program with many calculations (in this case, a sprawling RPG), or is it more efficient to simply use standard mathematical operations because the compiler will optimise it all for you? Or, am I asking the wrong question entirely?

  Read the article

• filter log file by defining regexes

  - by fmpdmb

  I have some HUGE log files (50Mb; ~500K lines) I need to start filtering some of the crap out of. The log files are being produced using log4j and have the basic pattern of: [log-level] date-time class etc, etc log-message I'm looking for a way that I can identify a regex start and regex end (or something similar) that will filter out the matching entries from the file so I can more easily wade through these massive files. I'm sure I could write a java program to accomplish this task, but I thought I'd ask the community before going down that path. Thanks in advance.

  Read the article

• C# & C++, runtime error when call C++ dll from C#

  - by 5YrsLaterDBA

  I have written a C++ wrapper DLL for C# to call. The DLL was tested and worked fine with my C++ test program. now integrated with C#, I got runtime error and crashed. Cannot use debugger to see more details. The C++ side has only one method: #ifdef DLLWRAPPERWIN32_EXPORTS #define DLLWRAPPERWIN32_API __declspec(dllexport) #else #define DLLWRAPPERWIN32_API __declspec(dllimport) #endif #include "NB_DPSM.h" extern "C" { DLLWRAPPERWIN32_API int WriteGenbenchDataWrapper(string fileNameToAnalyze, string parameterFileName, string baseNameToSaveData, string logFileName, string& message) ; } in the C# side, there is a definition, [DllImport("..\\..\\thirdParty\\cogs\\DLLWrapperWin32.dll")] public static extern int WriteGenbenchDataWrapper(string fileNameToAnalyze, string parameterFileName, string baseNameToSaveData, string logFileName, ref string message); and a call: string msg = ""; int returnVal = WriteGenbenchDataWrapper(rawDataFileName, parameterFileName, outputBaseName, logFileName, ref msg); I guess there must be something wrong with the last parameter of the function. string& in C++ should be ref string in C#?

  Read the article

• How can I enable auto-updates in a Qt cross-platform app?

  - by FX

  I love applications that are able to update themselves without any effort from the user (think: Sparkle framework for Mac). Is there any code/library I can leverage to do this in a Qt app, without having to worry about the OS details? At least for Windows/Mac/user-owned-linux-binaries. I could integrate Sparkle on the Mac version, code something for the linux case (only for a standalone, user-owned binary; I won't mess with distros packaging, if my program is ever packaged), and find someone to help me on the Windows side, but that's horribly painful. Surely I'm not the only one who wants to provide this to users?

  Read the article

• Why must use "out" instead of ref ?

  - by Phsika

  i wrote some code blocks about ref -out declaration. i think that ref is most useful out. Ok. why i need to use out. i can use always ref everytime: namespace out_ref { class Program { static void Main(string[] args) { sinifA sinif = new sinifA(); int test = 100; sinif.MethodA(out test); Console.WriteLine(test.ToString()); sinif.MethodB(ref test); Console.WriteLine(test.ToString()); Console.ReadKey(); } } class sinifA { public void MethodA(out int a) { a = 200; } int _b; public void MethodB(ref int b) { _b = b; b = 2*b; } } }

  Read the article

• How to insert an n:m-relationship with technical primary keys generated by a sequence?

  - by bitschnau

  Let's say I have two tables with several fields and in every table there is a primary key which is a technical id generated by a database sequence: table1 table2 ------------- ------------- field11 <pk> field21 <pk> field12 field22 field11 and field21 are generated by sequences. Also there is a n:m-relationship between table1 und table2, designed in table3: table3 ------------- field11 <fk> field21 <fk> The ids in table1 und table2 are generated during the insert statement: INSERT INTO table1 VALUES (table1_seq1.NEXTVAL, ... INSERT INTO table2 VALUES (table2_seq1.NEXTVAL, ... Therefore I don't know the primary key of the added row in the data-access-layer of my program, because the generation of the pk happens completely in the database. What's the best practice to update table3 now? How can I gain access to the primary key of the rows I just inserted?

  Read the article

• Ways to optimize Android App code based on function call stack?

  - by K-RAN

  I've been told that Android OS stores all function calls in a stack. This can lead to many problems and cause the 'hiccups' during runtime, even if a program is functionalized properly, correct? So the question is, how can we prevent this from happening? The obvious solution is to functionalize less, along with other sensible acts such as refraining from excessively/needlessly creating objects, performing static calls to functions that don't access fields, etc... Is there another way though? Or can this only be done through careful code writing on the programmers' part? Does the JVM/JIT automatically optimize the bytecode during compile time to account for this?? Thanks a lot for your responses!!

  Read the article

• Semantic errors

  - by gautam kumar

  Can semantic errors be detected by the compiler or not? If not when do the errors get detected? As far as I know semantic errors are those errors which result from the expressions involving operators with incorrect number/type of operands. For example: n3=n1*n2;//n1 is integer, n2 is a string, n3 is an integer The above statement is semantically incorrect. But while reading C Primer Plus by Stephen Prata I found the following statement The compiler does not detect semantic errors, because they don't violate C rules. The compiler has no way of divining your true intentions. That leaves it to you to find these kinds of errors. One way is to compare what a program does to what you expected it to do. If not the compiler, who detects those errors? Am I missing something?

  Read the article

< Previous Page | 648 649 650 651 652 653 654 655 656 657 658 659  | Next Page >