Search Results

Search found 46749 results on 1870 pages for 'system preferences'.

Page 652/1870 | < Previous Page | 648 649 650 651 652 653 654 655 656 657 658 659  | Next Page >

• Dual displays not working - NVidia - Ubuntu 12.4

  - by user75105

  Graphics Card: NVidia 460 GTX. Driver: NVIDIA accelerated graphics driver (version current) I have one DVI monitor, an old Dell LCD from 2005, and one VGA monitor, an Asus ML238H from 2010 whose HDMI port broke. The Asus is plugged into my graphics card's primary monitor slot and is the better monitor even though it is VGA but my computer defaults to the Dell. This happens when I boot as well; the loading screens, the motherboard brand image, etc. are all displayed on the Dell monitor until Windows loads. Then both monitors work. The same thing happened when I booted up Ubuntu 12.4 but I did not see the second monitor when the log-in screen popped up, nor did I when I logged in. I went to System Settings/Displays and my Asus monitor is not an option. I clicked Detect Displays and the Asus is not detected. I looked at the other questions regarding NVIDIA drivers and recalled my problems with Ubuntu a few years ago and decided to check the driver. I went to Additional Drivers to install the proprietary driver and it looks like it's installed and active but I'm still having this problem. There is another driver option, the post-release NVIDIA driver, but that does not fix the problem either. Also, under System Details/Graphics the graphics device is listed as Unknown, which might indicate that it is using an open source generic driver and not the proprietary NVidia driver. But under Additional Drivers it says that I am using the NVidia driver. Any help is appreciated.

  Read the article

• Ubuntu cannot see Windows 7 partitions on install

  - by Nash0

  I've been trying to install Ubuntu 10.10 as a dual boot with Windows 7 on my Dell latitude e6510. It is currently running Windows 7 and I have used the MS disk tools to shrink the Win 7 NTFS partition to make room for Linux. The issue I'm having is that when I run Ubuntus installer by booting from CD it sees the entire hard drive as unallocated space. I have also tried Kbuntu 10.10, Fedora 14, booting a Gparted 0.8.0 usb drive, and Ubuntu "install in Windows" with wubi they all have problems. EDIT: When I run the "try Ubuntu" option on booting from cd it can mount my Windows partition and I can view the files. The output of sudo parted -l when running in try Ubuntu mode: Warning: /dev/sda contains GPT signatures, indicating that it has a GPT table. However, it does not have a valid fake msdos partition table, as it should. Perhaps it was corrupted -- possibly by a program that doesn't understand GPT partition tables. Or perhaps you deleted the GPT table, and are now using an msdos partition table. Is this a GPT partition table? Yes/No? yes Model: ATA ST9500420AS (scsi) Disk /dev/sda: 500GB Sector size (logical/physical): 512B/512B Partition Table: gpt Number Start End Size File system Name Flags Warning: Unable to open /dev/sr0 read-write (Read-only file system). /dev/sr0 has been opened read-only. Error: /dev/sr0: unrecognised disk label

  Read the article

• Fresh install of 12.04 using USB stick booted into tty1

  - by croc

  I just installed 12.04 Alternate for the first time to give it a try using a USB stick burned with UnetBootIn. It installed without a problem. But it booted into a tty1 console without booting into a GUI. After logging into the tty1 console, I typed unity. It appeared that the system doesn't have unity desktop. How can it be solved? My installation didn't show any error. Something worth mentioning: During installation, I had to choose an option saying 'customize the system to your needs' something like that I don't remember correctly with options 'SSH server','Mail Server', 'Ubuntu Desktop',.....,'Manual selection of packages' etc. I chose 'Ubuntu Desktop'. I haven't encountered something like this in 11.04. To do an installation of Alternate iso using UnetBootIn, i used '12.04_Hdmedia' option of that software and had to change file extension of .ude to .udeb in /pool/main/l/linux that i found in Alternate ubuntu cdrom detect to go around with the cdrom detection problem. I have a 945G intel graphics.

  Read the article

• HDMI & Display Port stopped work on 11.10

  - by dizzy

  After upgraded two laptops to 11.10, HDMI and Display ports stopped to work. Symptoms on each (btw. it used to work with 11.04 on both): laptop Dell Inspiron 1525 (HDMI, Intel GMX 3100): after HDMI cable is plugged in, screen is corrupted (no panel, no icons), system is unresponsive, TV set receives some signal, but only blue screen and some regular ticks can be heard. Unplugging the cable system recovers. No logs were checked. Thinkpad W510 (DisplayPort, NVidia). Simple "Screens" utility does not recognizes TV set, but this is something to do with the differences between Nvidia driver API and the one expected from the utility, as far I could spot on the net. However, using Nvidia-settings, TV is recognized, but cannot be enabled and used. Beside that, touch pad freezes after HDMI2DisplayPort connector is plugged in the laptop (not immediately, but after few seconds - probably after some handshake with the TV set crashes). It is strange that no such bug reports can be found on the net. So, I guess it is something wrong on our laptops only, but would appreciate some hints (i.e. any known changes recently related to HDMI, Display Port, X-Windows, kernel... wherever I should take a look and fix the issue).

  Read the article

• Need some critique on .NET/WCF SOA architecture plan

  - by user998101

  I am working on a refactoring of some services and would appreciate some critique on my general approach. I am working with three back-end data systems and need to expose an authenticated front-end API over http binding, JSON, and REST for internal apps as well as 3rd party integration. I've got a rough idea below that's a hybrid of what I have and where I intend to wind up. I intend to build guidance extensions to support this architecture so that devs can build this out quickly. Here's the current idea for our structure: Front-end WCF routing service (spread across multiple IIS servers via hardware load balancer) Load balancing of services behind routing is handled within routing service, probably round-robin One of the services will be a token Multiple bindings per-service exposed to address JSON, REST, and whatever else comes up later All in/out is handled via POCO DTOs Use unity to scan for what services are available and expose them The front-end services behind the routing service do nothing more than expose the API and do conversion of DTO<-Entity Unity inject service implementation to allow mocking automapper for DTO/Entity conversion Invoke WF services where response required immediately Queue to ESB for async WF -- ESB will invoke WF later Business logic WF layer Expose same api as front-end services Implement business logic Wrap transaction context where needed Call out to composite/atomic services Composite/Atomic Services Exposed as WCF One service per back-end system Standard atomic CRUD operations plus composite operations Supports transaction context The questions I have are: Are the separation of concerns outlined above beneficial? Current thought is each layer below is its own project, except the backend stuff, where each system gets one project. The project has a servicehost and all the services are under a services folder. Interfaces live in a separate project at each layer. DTO and Entities are in two separate projects under a shared folder. I am currently planning to build dedicated services for shared functionality such as logging and overload things like tracelistener to call those services. Is this a valid approach? Any other suggestions/comments?

  Read the article

• What version was installed? x64 or i686? What's the difference exactly?

  - by Seppo

  Okay, so heres my problem. I recently started migrating several services to individual VMs on my box, using VirtualBox 4.1. I created a new VirtualBox VM with guest type "Ubuntu (64 Bit)". I've already done this before and it worked like a charm. I then installed unbutu server (12.04) from the exact same dvd image. All the time I thought that it should have installed x64. I already put a few hours work into the new VM, migrating the webserver and mail system etc. Today I tried installing a x64 piece of software and it suddenly told me that it needed x64 and I had only i686. I checked uname -a and this is what it gave me: Linux hostname 3.2.0-29-generic-pae #46-Ubuntu SMP Fri Jul 27 17:25:43 UTC 2012 i686 i686 i386 GNU/Linux Any guesses what went wrong? All the time I was thinking I had a x64 system. Any way to move to a "real" x64? I have a second VM on this host which is running x64 just fine .. P.S.: grep --color=always -iw lm /proc/cpuinfo returns lm among the flags.

  Read the article

• Lenovo ThinkPad W530 problem to activate the optical/DVD drive

  - by Marko Apfel

  Problem Sometimes my notebook shows the optical drive as power off: But the hint there is not changing this state. Solution By looking in the device manager you see the next problem: So open the properties via right mouse click. This gives you the hint to remove the drive first. “Windows cannot use this hardware device because it has been prepared for "safe removal", but it has not been removed from the computer. (Code 47)” Whether you select the comment by dragging the mouse over the the hidden part or pressing the button “Properties”. So we unplug and reinsert the ultrabay. If you think, now the system is working – you are wrong. Now the system is the meaning, that the ultrabay is unplugged. You could verify this by refresh the view in the device panel. Now there is no longer our device. Yet your great gig comes – unplug the ultra bay and reinsert it a second time! After this you could hear with a media inside, that the motor is really started and we have a working device What a difficult birth …

  Read the article

• Can't mount my USB Drive

  - by user996056

  ~> sudo mount /dev/sdb1 /media/Disk Did not find any restart pages in $LogFile and it was not empty. The file system wasn't safely closed on Windows. Fixing. I have a USB Hard Disk and Windows can't detect it. So I tried to open it up on Ubuntu using gparted. Gparted detects the NTFS partition, so everything seems to be fine (note, though, that the total size of the files in this disk is over 1 TB). I tried to mount it using: sudo mount /dev/sdb1 /media/Disk But I got: Did not find any restart pages in $LogFile and it was not empty. The file system wasn't safely closed on Windows. Fixing. Then, the process just sits there blinking. Any ideas on how to fix it? It's taking forever ( 10 minutes), should I wait or cancel it and do something else? Thank you in advance.

  Read the article

• Using mod_rewrite for a Virtual Filesystem vs. Real Filesystem

  - by philtune

  I started working in a department that uses a CMS in which the entire "filesystem" is like this: create a named file or folder - this file is given a unique node (ex. 2345) as well as a default "filename" (ex. /WelcomeToOurProductsPage) and apply a template assign one or more aliases to the file for a URL redirect (ex. /home-page-products - can also be accessed by /home-page-products.aspx) A new Rewrite command is written on the .htaccess file for each and every alias Server accesses either /WelcomeToOurProductsPage or /home-page-products and redirects to something like /template.aspx?tmp=2&node=2345 (here I'm guessing what it does - I only have front-end access for now - but I have enough clues to strongly assume) Node 2345 grabs content stored in a SQL Db and applies it to the template. Note: There are no actual files being created on the filesystem. It's entirely virtual. This is probably a very common thing, but since I have never run across this kind of system before two months ago, I wanted to explain it in case it isn't common. I'm not a fan at all of ASP or closed-sourced systems, so it may be that this is common practice for ASP developers. My question, that has taken far too long to ask, is: what are the benefits of this kind of system, as opposed to creating an actual file hierarchy? Are there any drawbacks to having every single file server call redirected? To having the .htaccess file hold rewrite rules for every single alias?

  Read the article

• What's the best way to handle numerous recurring log entries in game loop?

  - by Kaa

  I have a custom logging system, use of which is scattered all over the engine and game. The system is linked to a "LogStore" that has an std::vector<string> logs[NUM_LOG_TYPES] - each vector corresponds with it's log type (info, error, debug, etc.). There's one extra std::vector that has "coordinates" to all log entries in the order they were received. Now, all the logging output is also displayed inside my development console in the game. The game console is handled by HTML-type GUI and therefore requires a new <p> element being added for each log output. My problem is that the log entries that are generated in the main loop each frame freeze the engine, because they continue to add elements to the in-game console, and if the console or guy generates a warning - that creates an infinite logging loop. I want to solve it by handling the recurring log entries in an elegant way that lets you know that something is critically wrong, but won't freeze the engine - like displaying the count of errors in the last 60 frames instead of displaying errors themselves. But how do you guys handle this? Does anyone know any nifty tricks to do this? I understand the question may sound vague, but if someone came across this type of issue I'm sure they would know exactly what's happening. Example problematic log entries: OpenGL warnings (I actually do check for errors every frame in many places) Really any prints anywhere in the main loop (may be debugging, may be warnings)

  Read the article

• Move entire OS from NTFS drive to bigger ext4 drive.

  - by pangel

  According to SMART data, the hard drive I curently use is about to fail. I bought a new, bigger drive to copy the system to a safer place. The old drive is 160GB. Ubuntu was installed with Wubi, and the partition is NTFS. There are a few other partitions around (recovery partition, swap...) that I don't care about. The new drive is 320GB. I would like the new system to run on ext4, not on NTFS. I looked at solutions that use dd, or clonezilla, but it seems that moving to a different filesystem prevents me from using them. I considered installing a brand new ubuntu on the new hard drive and then copy /home from the old drive to the new drive, but I heard that there would be file permission problems. I would also have to reinstall all my software. One last thing: the NTFS drive has dead sectors. I don't know how this can influence the copy process, but I mention it just in case. edit: I do not care about the windows partition. I just want Ubuntu to make the transition.

  Read the article

• Will Ubuntu work out on my mother's computer?

  - by PleaseStand

  My mother had an old Compaq desktop computer running Windows 98, which she used for occasional Web browsing and playing cards. Recently, a relative brought up a newer computer; it ran Windows XP. Unfortunately, the hard drive failed soon afterward, forcing me to reinstall the operating system. Not having the original Windows disc or product key led me to consider Ubuntu Linux. Will it work for mom? Is the hardware compatible? (Check the history of this question for the full specifications.) Would Ubuntu/Xubuntu suffice, or would I be better off buying a new copy of Windows? Is her card game (Hoyle Card Games 3) likely to run on Wine? I believe the minimum system requirement is Windows 95. Failing Wine compatibility, is running Windows 98 on VirtualBox an option on such an old computer? Are there any equally good card games for Linux? She plays mainly Bridge, Poker, and Solitaire. Is there any "Large Fonts" option for those with poor vision? Is it possible to use a serial mouse?

  Read the article

• How to recover lost files after an install

  - by Gentry McColm

  I'm a newbie learning along the way. I recently installed a 2nd hdd into my ubuntu box. Have one of about 160g which runs ubuntu 12.04. And the new hdd was 1 tb, used for holding videos. I had set up 2nd drive as ext3 I believe. And set up folders on it to hold the videos. Worked great. Also thought I had set it up for auto mount. I was able to read and write on it. Etc. Computer froze, so had to reboot it. When I did, system would not reboot: hung on the Ubuntu screen with 5 dots. I hit a few buttons and the command screen showed up, indicating that my 2nd hdd would not mount. Stopped up whole system. Tried rebooting, no go. Had to reinstall ubuntu on the 1st hdd. Did not apparently touch the 2nd one. Well, when I got it up and running, my 2nd hdd mounted automatically (yeah!), but now I cannot find my videos I already had on it. I had not put any more than about 30g of videos on it, but now when I read its Properties, it says I'm using about 50g. So, I'm wondering if somewhere in that, buried, are my 17 videos. Any help in recovering this? Thanks!

  Read the article

• C#.NET: How to update multiple .NET pages when a particular event occurs in one .Net page? In another words how to use Observer pattern(Publish and subscribe to events)

  Problem: Suppose you have a scenario in which you have to update multiple pages when an event occurs in main page. For example imagine you have a main page where you are dispalying a tab control. This tab control has 3 tab pages where you are loading 3 different user controls. On click of an update button in main page imagine if you have do something in all the 3 tab panels. In other words an event in main page has to be handled in many other pages. An event in main page which contains the tab control has to be handled in all the tab panels(user controls) Answer: Use Observer pattern Define a base page for the page that contains the tab control. Main page which contains the tab: Baseline_Baseline Basepage for the above main page: BaselineBasePage User control that has to be udpated for an event in main page: Baseline_PriorNonDeloitte Source Code: public class BaselineBasePage : System.Web.UI.Page { IList lstControls = new List(); public void Add(IObserver userControl) { lstControls.Add(userControl); } public void Remove(IObserver userControl) { lstControls.Remove(userControl); } public void RemoveAllUserControls() { lstControls.Clear(); } public void Update(SaveEventArgs e) { foreach (IObserver LobjControl in lstControls) { LobjControl.Save(e); } } } public interface IObserver { void Update(SaveEventArgs e); } public partial class Baseline_Baseline : BaselineBasePage { . . . this.Add(_ucPI); this.Add(_ucPI1); protected void abActionBar_saveClicked(object sender, EventArgs e) { SaveEventArgs se = new SaveEventArgs(); se.TabType = (BaselineTabType)tcBaseline.ActiveTabIndex; this.Update(se); } } Public class Baseline_PriorNonDeloitte : System.Web.UI.UserControl,IObserver { public void Update(SaveEventArgs e) { } } More info at: http://www.dofactory.com/Patterns/PatternObserver.aspx span.fullpost {display:none;}

  Read the article

• Extended service set help [closed]

  - by Cygnus X

  Sorry, this is going to be long and rambly. So, at home my network is set up as such: I have a "master router" that handles DHCP, from there I have a basic 5 port switch, and coming off that, I have a second router that I put in access point mode so that I could have better wireless coverage in my house. I cant seem to access it through a web browser since the master router kicked in and assigned it an ip address. But, i told you all that story, so that i could tell you this story. At the company I work for, they are trying to set up wireless cameras, according to the manual for these, in order to connect these cameras to our network, we need to get into the wireless router and associate the router with the cameras, but the problem is, the network is setup like my home network. Theres a "master router" which is a windows 2003 server, and then a wireless router in AP mode dishing out wireless access. I cant get into the router (by the way I'm not the system admin for the company, nor do i know jack squat about windows server , nor can I easily get in contact with the system admin. (quite the cluster f*k, eh?)) I've tried using wireshark to find the routers ip, dug through arp tables, tried plugging straight into the router, but I cant seem to get into the damn thing. Any ideas/suggestions would be greatly appreciated.

  Read the article

• SQL 2008/2005 Hosting :: Error - “Named Pipes Provider, error: 40 – Could not open a connection to SQL Server”

  - by mbridge

  When setting up a Microsoft Windows Server 2008 system, I went through the motions to set up IIS, MS SQL Server 2008, and Visual Studio 2010 to use as a test-bed. One of the immediate benefits of setting up such a system is that most development can be done remotely: MS SQL Server Management Studio, Visual Studio’s Web development suite, as well as file shares, remote desktop, etc, make for a great way to remotely develop in ‘pristine’ conditions. But there are drawbacks, too, such as needing to deal with firewall issues, not being able to penetrate past a router or the requirement of setting up a VPN. One of the problems I encountered when trying to remote into the MS SQL Server 2008 that I’d set up was the following error: Named Pipes Provider, error: 40 – Could not open a connection to SQL Server I followed the below steps, and was able to connect to the server after just a few moments of tinkering: 1. From the server in question, surf to this Microsoft article, and download and install the Firewall rules modification program. Never drop your firewall, even on a development machine, unless you have a really good reason to. 2. Launch SQL Server Configuration Manager. Navigate to SQL Server Network Configuration, then Protocols for your server name. Enable TCP/IP and Named Pipes by right-clicking and choosing Enable for each given Protocol Name. 3. Restart the SQL Server service from Services (or from command line, subsequently run “net stop mssqlserver” then “net start mssqlserver”. 4. Try your remote connection once more, and you should be able to connect. It’s not a terribly difficult concept, but one of the more challenging tasks developers face is dealing with environment setup. And while there is a certain blurred-line overlap between software development and server administration, sometimes the latter is daunting, especially given that you might set up only a handful of servers during your career.

  Read the article

• trying to upgrade memory

  - by user214876

  I've been using Ubuntu on my laptop for awhile now. Not quite used to it yet. I've got a Acer Aspire with an orig 4 gig mem/500 gig HDD. Running 12.04 presently 32 bit sys. I have the 13.04 upgrade disc and want to upgrade my memory to 8 Gig. Everytime I install the 8 gig memory, the system won't boot to either version. I downloaded the 64 bit version of both versions of Ubuntu but no results yet. Can anyone offer a suggestion here? I'm kinda lost. Additional Information: The memory was purchased through Acer/Kingston. Recommended for this computer. I watched the video on installing it, so I doubt it's installed wrong. (There's only one way of putting it in). I swapped Op Sys, from Ubuntu 12.04 to 13.04 to 13.10 and now to Xubuntu 13.10 64 bit version. I'm still not having any luck with this upgrade. Would it be necessary to upgrade the CPU? It's just a thought, I don't know what else could keep me from utilizing the new memory. Additional Information: Called Kingston this afternoon, they are sending replacement lower density memory modules 2/4 gig - 8 gig. Tech service says I need to upgrade BIOS to utilize new memory install VIA Dos since it is no longer a windows system. I'm not sure how to go about that but it's a learning process I can live with. Thank you all for your help/support. I realize this isn't a Ubuntu problem but each new user of this op sys, seems to share simular problems and maybe someone can use this info to their advantage.

  Read the article

• Oracle regains the #1 UNIX Shipments Marketshare

  - by EricReid-Oracle

  Oracle has regained the #1 UNIX Server Shipments spot! According to IDC, Oracle’s share was 33.6%, up from 32.7% in the year ago period, and 32.2% in C4Q13:  IDC: WW Unix Unit Shipments, Share, Growth 2013Q1 Share 2013Q4 Share 2014Q1 Share Sequential Growth Y/Y Growth Oracle 10,141 32.7% 10,294 32.2% 8,355 33.6% -18.8% -17.6% IBM 10,203 32.9% 11,533 36.0% 6,919 27.8% -40.0% -32.2% HP 7,046 22.7% 6,786 21.2% 6,549 26.4% -3.5% -7.1% Fujitsu 1,174 3.8% 1,141 3.6% 1,069 4.3% -6.3% -8.9% Dell 565 1.8% 499 1.6% 519 2.1% 4.0% -8.2% NEC 69 0.2% 81 0.3% 63 0.3% -22.5% -9.4% Others 1,804 5.8% 1,684 5.3% 1,380 5.6% -18.1% -23.5% Total Market 31,002 100.0% 32,018 100.0% 24,854 100.0% -22.4% -19.8% While the UNIX server space is currently undergoing some contraction (on a pure numbers basis), this can be traced in part to an overall consolidation trend, due to the greatly-increased price-performance of our systems. Consider this: one SPARC T5-4 system has 1/16th the number of sockets and 1/192nd the number of cores of the previous high-end M9000-64 system -- all at 5X the price-performance. SPARC. Solaris. Nuff' said.

  Read the article

• Mounting a new hard drive (sda1) to my existing filesystem

  - by shank22

  I tried to read some posts regarding mounting a new hard drive, but I am facing some problem. My new hard drive is sda1. The output of sudo fdisk -l is: sudo fdisk -l Disk /dev/sdb: 999.7 GB, 999653638144 bytes 255 heads, 63 sectors/track, 121534 cylinders, total 1952448512 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00016485 Device Boot Start End Blocks Id System /dev/sdb1 * 2048 1935822847 967910400 83 Linux /dev/sdb2 1935824894 1952446463 8310785 5 Extended /dev/sdb5 1935824896 1952446463 8310784 82 Linux swap / Solaris Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x78dbcdc1 Device Boot Start End Blocks Id System /dev/sda1 2048 1953521663 976759808 7 HPFS/NTFS/exFAT What should be done to add this new sda1 hard drive on booting up? What should be added in the /etc/fstab file? I have not performed any partition on the new sda1 drive. I need help on how to proceed from scratch and can't afford to take any risk. Please help!

  Read the article

• What tools do I have to disuade users from using the same password with similar systems?

  - by Resorath

  I'm building a web application that connects to other web services (using strictly anonymous binding, so no user passwords are being used). However the web application maintains its own users itself, and is required to ask certain details such as e-mail addresses and public linking information to these other web services (for example, a username but not a password). I want to deter or prevent users from reusing passwords in my application that they have also used in the applications I'm linking to. For example, if I ask for their e-mail and provide me with their gmail address, I don't want them using their gmail password for my system. Another example would be reusing a password to a linked system in which they also gave me their username. One idea I had was to simply try using the information they gave me, along with the password they are trying to store and log in to these external web applications to test the password - then immediately unbind if I was successful and ask the user to use a different password. However I suspect there is a host of morale and legal issues there. The reason this is a big deal to me is accountability. My application is simply not funded enough to invest properly in security around user passwords. A salted, hashed password in a public SQL-like database is as secure as it gets. So if passwords and linked usernames or e-mails get out, I don't want my userbase compromised.

  Read the article

• Ubuntu 11.10 Random reboots how to find root cause?

  - by Indigo42

  All, This issue started with 11.04, I upgraded to 11.10 this week in hopes it would correct it, but after a few days it happened again.. A few times a day, randomly, my monitors will go black and the machine will come back in the post screen and boot up again. Sometimes it boots up properly, sometimes it boots to disk scan (I understand why...the machine just died with a bunch of stuff open) and sometimes it takes several cycles of this to come up. I connected to the system with my laptop and tailed dmesg, syslog, kern.log, and Xorg.0.log. I also ran a cat /proc/kmesg. Nothing is showing up in any of these log files when it happens..it's just like someone has pulled the plug. I just got through running 4 hours of the memory test with no errors. I have a AMD Phenom 9850 Quad-Core Processor and Nvida 9500GT graphics card. This system has been stable for like 4 years. I'm thinking it might be a hardware problem, but how do I find out? Thanks,

  Read the article

• How to avoid tons of `instanceof` in collision detection?

  - by Prog

  Consider a simple game with 4 kinds of entities: Robots, Dogs, Missiles, Walls. Here's a simple collision-detection mechanism in psuedocode: (I know, O(n^2). Irrelevant for this question). for(Entity entityA in entities){ for(Entity entityB in entities){ if(collision(entityA, entityB)){ if(entityA instanceof Robot && entityB instanceof Dog) entityB.die(); if(entityA instanceof Robot && entityB instanceof Missile){ entityA.die(); entityB.die(); } if(entityA instanceof Missile && entityB instanceof Wall) entityB.die(); // .. and so on } } } Obviously this is very ugly, and will get bigger and harder to maintain the more entities there are, and the more conditions there are. One option to make this better is to have separate lists for each kind of entity. For example a Robots list, a Dogs list etc. And than check for collisions of all Robots with Dogs, and all Dogs with Walls, etc. This is better, but I still don't think it's good. So my question is: The collision detection system spotted a collision. Now what? What is the common way to react to the collision? Should the system notify the entity itself that it collided with something, and have it decide for itself how to react? E.g. entityA.reactToCollision(entityB). Or is there some other solution?

  Read the article

• How to swap or move 2 string in Array? [on hold]

  - by Wisnu Khazefa

  I have a need to convert .csv file to .dat file. In my problem, there are value pairs, with a name attribute (called Fund) and corresponding numeric value. If the input file has a pair whose value is 0, then that pair (Fund and value) is dropped. The output file should have only those pairs (Fund and value) where the value is non-zero. Here is the prototype of my code. public static void Check_Fund(){ String header = "Text1,Text2,Text3,FUND_UALFND_1,FUND_UALPRC_1,FUND_UALFND_2," +"FUND_UALPRC_2,FUND_UALFND_3,FUND_UALPRC_3,FUND_UALFND_4,FUND_UALPRC_4,FUND_UALFND_5,FUND_UALPRC_5,Text4,Text5,Text6,Text7"; String text = "ABC;CDE;EFG;PRMF;0;PRFF;50;PREF;0;PRCF;0;PRMP;50;TAHU;;BAKWAN;SINGKONG"; String[] head; String[] value; String showText = ""; head = header.split(","); value = text.split(";"); String regex = "\\d+"; String[] fund = {"PREF","PRMF","PRFF","PRCF","PRMP","PDFF","PSEF","PSCB","PSMF","PRGC","PREP"}; for(int i = 0; i < value.length; i++){ for(int j=0;j < fund.length; j++){ if(value[i].equals(fund[j]) && value[i+1].matches(regex)){ if(value[i+1].equals("0")){ value[i] = ""; value[i+1] = ""; } } } showText = showText + head[i] +":" + value[i] + System.lineSeparator(); } System.out.println(showText ); } Expected Result Input: FUND_UALFND_1:PRMF FUND_UALPRC_1:0 FUND_UALFND_2:PRFF FUND_UALPRC_2:50 FUND_UALFND_3:PREF FUND_UALPRC_3:0 FUND_UALFND_4:PRCF FUND_UALPRC_4:0 FUND_UALFND_5:PRMP FUND_UALPRC_5:50 Output: FUND_UALFND_1:PRFF FUND_UALPRC_1:50 FUND_UALFND_2:PRMP FUND_UALPRC_2:50 FUND_UALFND_0: FUND_UALPRC_0: FUND_UALFND_0: FUND_UALPRC_0: FUND_UALFND_0: FUND_UALPRC_0:

  Read the article

• What design pattern (in python) to use for properly seperate runtime infos with core code?

  - by user1824372

  I am not sure if this is a clear question. I work on a python project that is based on terminal(console), for which I am planning to implement a GUI. I am not major in CS so I really have no idea about how to effectively design a message system such that: in console, it provide nice look info when runtime. in GUI, it is directed to a certain widget, let's say, a text label, or a bottom bar, or a hide-able frame. Do you have any suggestions? Currently, I am using print function to provide essential informations on stdout during runtime. So a lot of print .... are distributed here and there among the code. I am thinking to use macro-like variables such as 'FILE_NOT_EXTIS_MESSAGE' for printing, and define the variables in one file. Is this a standard way that people always do? How about I introduce a logging system? In sum, I am ask for a pattern that people are commonly using for handling of screen output information with high effectiveness and adaptivity.

  Read the article

• CCNet and .Net 4.0

  - by Pino

  Could not load file or assembly 'System.Data' or one of its dependencies. An attempt was made to load a program with an incorrect format We have just upgraded one of our projects to .Net 4.0 and have re-configured our build server (Cruise Control .Net). Anyone help with the above error? I have included more trace below. > debug: > > [copy] Copying 1 file to 'C:\Builds\SilverChip\Working\sc.website\web.config'. > [copy] Copying 1 file to 'C:\Builds\SilverChip\Working\sc.admin\web.config'. > [copy] Copying 1 file to 'C:\Builds\SilverChip\Working\sc.website\bin\Intelligencia.UrlRewriter.dll'. > [copy] Copying 1 file to 'C:\Builds\SilverChip\Working\sc.website\bin\UrlRewritingNet.UrlRewriter.dll'. > [exec] Microsoft (R) Build Engine Version 4.0.30319.1 > [exec] [Microsoft .NET Framework, Version 4.0.30319.1] > [exec] Copyright (C) Microsoft Corporation 2007. All rights > reserved. > [exec] > [exec] Build started 11/05/2010 12:02:16. > [exec] Project "C:\Builds\SilverChip\Working\Silverchip.sln" > on node 1 (default targets). > [exec] ValidateSolutionConfiguration: > [exec] Building solution configuration "Debug|Any CPU". > [exec] Project "C:\Builds\SilverChip\Working\Silverchip.sln" > (1) is building > "C:\Builds\SilverChip\Working\sc.lib\sc.lib.csproj" > (2) on node 1 (default targets). > [exec] CoreCompile: > [exec] Skipping target "CoreCompile" because all output files > are up-to-date with respect to the > input files. > [exec] _CopyAppConfigFile: > [exec] Skipping target "_CopyAppConfigFile" because all > output files are up-to-date with > respect to the input files. > [exec] CopyFilesToOutputDirectory: > [exec] sc.lib -> C:\Builds\SilverChip\Working\sc.lib\bin\Debug\sc.lib.dll > [exec] Done Building Project "C:\Builds\SilverChip\Working\sc.lib\sc.lib.csproj" > (default targets). > [exec] Project "C:\Builds\SilverChip\Working\Silverchip.sln" > (1) is building > "C:\Builds\SilverChip\Working\sc_admin.metaproj" > (3) on node 1 (default targets). > [exec] Build: > [exec] Copying file from "C:\Builds\SilverChip\Working\sc.lib\bin\Debug\sc.lib.dll" > to "sc.admin\\Bin\sc.lib.dll". > [exec] Copying file from "C:\Builds\SilverChip\Working\sc.lib\bin\Debug\SubSonic.Core.dll" > to "sc.admin\\Bin\SubSonic.Core.dll". > [exec] Copying file from "C:\Builds\SilverChip\Working\sc.lib\bin\Debug\sc.lib.pdb" > to "sc.admin\\Bin\sc.lib.pdb". > [exec] C:\Windows\Microsoft.NET\Framework\v4.0.30319\aspnet_compiler.exe > -v /sc.admin -p sc.admin\ -u -f -d PrecompiledWeb\sc.admin\ > [exec] ASPNETCOMPILER : error ASPCONFIG: Could not load file or > assembly 'System.Data' or one of its > dependencies. An attempt was made to > load a program with an incorrect > format. > [C:\Builds\SilverChip\Working\sc_admin.metaproj] > [exec] Done Building Project "C:\Builds\SilverChip\Working\sc_admin.metaproj" > (default targets) -- FAILED. > [exec] Project "C:\Builds\SilverChip\Working\Silverchip.sln" > (1) is building > "C:\Builds\SilverChip\Working\sc_website.metaproj" > (4) on node 1 (default targets). > [exec] Build: > [exec] Copying file from "C:\Builds\SilverChip\Working\sc.lib\bin\Debug\sc.lib.dll" > to "sc.website\\Bin\sc.lib.dll". > [exec] Copying file from "C:\Builds\SilverChip\Working\sc.lib\bin\Debug\SubSonic.Core.dll" > to > "sc.website\\Bin\SubSonic.Core.dll". > [exec] Copying file from "C:\Builds\SilverChip\Working\sc.lib\bin\Debug\sc.lib.pdb" > to "sc.website\\Bin\sc.lib.pdb". > [exec] C:\Windows\Microsoft.NET\Framework\v4.0.30319\aspnet_compiler.exe > -v /sc.website -p sc.website\ -u -f -d PrecompiledWeb\sc.website\ > [exec] ASPNETCOMPILER : error ASPCONFIG: Could not load file or > assembly 'System.Data' or one of its > dependencies. An attempt was made to > load a program with an incorrect > format. > [C:\Builds\SilverChip\Working\sc_website.metaproj] > [exec] Done Building Project "C:\Builds\SilverChip\Working\sc_website.metaproj" > (default targets) -- FAILED. > [exec] Done Building Project "C:\Builds\SilverChip\Working\Silverchip.sln" > (default targets) -- FAILED. > [exec] > [exec] Build FAILED. > [exec] > [exec] "C:\Builds\SilverChip\Working\Silverchip.sln" > (default target) (1) -> > [exec] "C:\Builds\SilverChip\Working\sc_admin.metaproj" > (default target) (3) -> > [exec] (Build target) -> > [exec] ASPNETCOMPILER : error ASPCONFIG: Could not load file > or assembly 'System.Data' or one of > its dependencies. An attempt was made > to load a program with an incorrect > format. > [C:\Builds\SilverChip\Working\sc_admin.metaproj] > [exec] > [exec] > [exec] "C:\Builds\SilverChip\Working\Silverchip.sln" > (default target) (1) -> > [exec] "C:\Builds\SilverChip\Working\sc_website.metaproj" > (default target) (4) -> > [exec] ASPNETCOMPILER : error ASPCONFIG: Could not load file > or assembly 'System.Data' or one of > its dependencies. An attempt was made > to load a program with an incorrect > format. > [C:\Builds\SilverChip\Working\sc_website.metaproj] > [exec] > [exec] 0 Warning(s) > [exec] 2 Error(s) > [exec]

  Read the article

< Previous Page | 648 649 650 651 652 653 654 655 656 657 658 659  | Next Page >