Search Results

Search found 40159 results on 1607 pages for 'multiple users'.

Page 654/1607 | < Previous Page | 650 651 652 653 654 655 656 657 658 659 660 661  | Next Page >

• vSphere Promiscuous mode only receiving packets one way from network switch

  - by steve.lippert

  We have two network switches, a POE switch (SwitchA) to power our phones / users computers and a non-POE switch (SwitchB for the rest network.) Each switch is setup to do port mirroring to support our VoIP recording system. SwitchA does port mirroring on specific ports if we need to record a user. SwitchB mirrors one port to monitor our work at home users (Internet comes in from managed router, to switch, back out to our firewall.) These two port mirroring setups feed into one vmware vSphere 4.1 server, it has four total physical cards. The other two NICs feed into an unmanaged switch for connecting to the rest of the network. Once into the vSphere server all network ports go into a vSwitch, and then one of the servers (Windows 2008 R2) sniffs them out and does its thing. Everything is working fine and dandy from SwitchB. But on SwitchA we only receive one side of the VoIP packets (going out to the phone, nothing coming in from the phone). Troubleshooting steps I have taken so far: I hooked up my laptop to the monitor port on SwitchB and I see both sides of the packets. I swapped which network interface is plugged into the monitor port on SwitchA. Because everything feeds into one vSwitch / vNetwork and both sides of the conversation arrive just fine from SwitchB I believe everything is configured correctly on the vSphere server/guest. What could be causing one way packets to arrive on my guest machine from only one interface, but not the other? Could a bad cable be causing the problems from SwitchB?

  Read the article

• Industrial strength cloud file storage

  - by ArthurG

  I'm looking for an industrial strength cloud file storage system. It will be used by multiple people in a startup. Our requirements: Transparent file system access: files and folders in the file system must be able transparently access (read and write) files in the cloud; files must be synchronized whenever network access is available and buffered otherwise. The system must be usable by non-technical people. Access control: we need to control who can access which files, at least on a very coarse basis. e.g., the developers will be able to access the system design documents, only the corporate folks can access recruiting documents, and only management can access certain corporate documents. Dropbox provides this via Sharing folders, but that's not adequate, if I understand it correctly, because there's no authentication of the sharing user. so the cloud service should have a notion of an account (our startup) with multiple users with distinct credentials and rights for each user Clients: it must be accessible from Macs and PCs; I would hope that it supports Linux (e.g., Ubuntu) too Security: it must provide robust security Backup: the cloud service must reliably backup the files Versioning: change version history, is a big plus, but not required Not free: we're willing to pay for the service So far, we've reviewed the following, albeit not completely thoroughly: Dropbox: has all except 1) Access control, which is provided via Sharing folders, but that's not adequate, if I understand it correctly, because there's no authentication of the sharing user. and 2) Security, as discussed here http://www.economist.com/blogs/babbage/2011/05/internet_security and here http://blog.dropbox.com/?p=821. Windows Live Mesh, has all except 1) Clients, only supporting Windows 7 and OS X. SpiderOak has all, except 1) Transparent file system access, which is only available for 1 user. Amazon Cloud, doesn't offer 1) Transparent file system access Rackspace Cloud Drive has all except 1) Access control and 2) Versioning I'll gladly include any clarifications or additional systems the community provides. Arthur

  Read the article

• How to set a static route for an external IP address

  - by HorusKol

  Further to my earlier question about bridging different subnets - I now need to route requests for one particular IP address differently to all other traffic. I have the following routing in my iptables on our router: # Allow established connections, and those !not! coming from the public interface # eth0 = public interface # eth1 = private interface #1 (10.1.1.0/24) # eth2 = private interface #2 (129.2.2.0/25) iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -A INPUT -m state --state NEW ! -i eth0 -j ACCEPT iptables -A FORWARD -i eth0 -o eth1 -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -A FORWARD -i eth0 -o eth2 -m state --state ESTABLISHED,RELATED -j ACCEPT # Allow outgoing connections from the private interfaces iptables -A FORWARD -i eth1 -o eth0 -j ACCEPT iptables -A FORWARD -i eth2 -o eth0 -j ACCEPT # Allow the two private connections to talk to each other iptables -A FORWARD -i eth1 -o eth2 -j ACCEPT iptables -A FORWARD -i eth2 -o eth1 -j ACCEPT # Masquerade (NAT) iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE # Don't forward any other traffic from the public to the private iptables -A FORWARD -i eth0 -o eth1 -j REJECT iptables -A FORWARD -i eth0 -o eth2 -j REJECT This configuration means that users will be forwarded through a modem/router with a public address - this is all well and good for most purposes, and in the main it doesn't matter that all computers are hidden behind the one public IP. However, some users need to be able to access a proxy at 192.111.222.111:8080 - and the proxy needs to identify this traffic as coming through a gateway at 129.2.2.126 - it won't respond otherwise. I tried adding a static route on our local gateway with: route add -host 192.111.222.111 gw 129.2.2.126 dev eth2 I can successfully ping 192.111.222.111 from the router. When I trace the route, it lists the 129.2.2.126 gateway, but I just get * on each of the following hops (I think this makes sense since this is just a web-proxy and requires authentication). When I try to ping this address from a host on the 129.2.2.0/25 network it fails. Should I do this in the iptables chain instead? How would I configure this routing?

  Read the article

• Wireless signal changes from strong to weak after connecting

  - by gibberish

  Router (primary AP) is a WRVS4400N, WAP (signal booster) is a WAP4410N. Problem: User is physically located within ten feet of WAP (200 feet from main wireless router). Signal is at 5 bars as user connects to wireless network. Within seconds, signal is at or below two bars and connection is poor. Background: Trying to solve problem of weak wireless signal in back offices. Desired result is for client laptops to automatically switch to the stronger signal. WAP is connected to network via Ethernet cable. WAP is set to AP mode (instead of Wireless Repeater mode) WAP does appear to boost signal. Using Windows 7 sys tray Connect To A Network applet, can observe signal boost as laptop approaches the WAP. Above-described problem happens to users located near or beyond the WAP. It does not happen to users in close proximity to the router. Secondary Question: If using WAP in AP Mode, do WAP and Router (primary AP) need to be on the same channel?

  Read the article

• Error on LDAP Login - xsessions error - Session lasted less than 10 seconds

  - by Draineh

  I have two machines both running CentOS 5.6 64bit. On the LDAP Machine it has a DHCP, BIND and OpenLDAP Server. LDAP is correctly configured and users can authenticate against it. Using root I configure machine 2 to use LDAP for authentication and when trying to log in it successfully authenticates against a saved user on the LDAP Server but produces the following errors and then throws me back to the login screen. I can still sign in as root and use the machine as normal. The syslog doesn't show any errors and I disabled SELinux to see if it was interfering. The error; Your session only lasted less than 10 seconds. If you have not lgoged out yourself, this could mean that there is some installation problem or that you may be out of diskspace. Try logging in with one of the failsafe sessions to see if you can fix this problem. There is then a tickbox to view the contents of ~/.xsessions-errors which contains; /etc/gdm/PreSession/Default: Registering your session with utmp /etc/gdm/PreSession/Default: running: /usr/bin/sessreg -a -u /var/run/utmp -x "/var/gdm:0:Xservers" -h "" -l ":0" "admin" localuser:admin being added to access control list No profile for user 'admin' found /bin/sh: /usr/bin/dbus-launch --exit-with-session /etc/X11/Xinit/Xclients: No such file or directory /bin/sh: line 0: exec: /usr/bin/dbus-launch --exit-with-session /etc/X11/xinit/Xclients: cannot execute: No such file or directory Apologies if someone notices something isn't spelt quite right or doesn't sound right, the system never actually creates or saves this file so I have had to type it across from the screen. Through the authentication panel in CentOS on the client I have set it to create the users home directory on login. The user is being correctly authenticated and the /home/admin folder has been created but this error would suggest it has not? The client is a new install on an 80gb hard drive so there is well over 80% of the drive still available. Thanks for any suggestions or pointers.

  Read the article

• G4 server running slow

  - by Abby Kach

  I have HP proliant ML 350 servers. We have 8 remote locations where users connect and log on to our server through DYNDNS to access our company ERP's to conduct day to day work. The base of our company ERP's is oracle for which we have a separate server.Now the problem is day by day the load on the server is increasing and the speed is getting slower and slower and users are facing a lot of issues . so I are planning to implement Sonic wall VPN. I conducted a demo of sonic wall but it was slower than the current speed of dyndns. the configuration of my server is as follows :- Linux HP ProLiant 370 Intel Xenon 3.20 GHZ 150 GB (72 * 2) 3 GB Suse Omega HP ProLiant 370 Intel Xenon 3.20 GHZ 300GB (72.8 * 4) Raid 5 4 GB Windows Server 2K3 Enterprise Edition Storage Box HP Storage Works 1400 Intel Xenon 2.00 GHZ 4 TB(1 TB * 4) Raid 5 2 GB Windows Server 2K8 Enterprise Edition Domain & Terminal HP ProLiant 350 Intel Xenon 3.20 GHZ 250 GB(72.8 * 3) Raid 5 4 GB Windows Server 2K3 Enterprise Edition Can some one help me as to how can i speed up my network at remote locations and reduce the problems of speed etc..

  Read the article

• Best way to run site through https on server which can't add additional certs

  - by penguin

  So I'm in a curious situation in that I am using a particular server to host things, which I can't host anywhere else (it has access to user databases etc which can't otherwise be accessed). I've been in quite a bit of discussion with the sysadmin at it looks like the only way to run our site: www.foo.com over https may be through some sort of proxy. Currently, users go to www.foo.com and are redirected to https:// host-server.com/foo, as there is an SSL cert installed on that. I want users to be on https:// www.foo.com. I'm told that for various reasons it's going to be very difficult to add an additional SSL cert to the host server. So I was wondering if it is possible to have the DNS records point to a new server, which then creates the HTTPS connection with the browser. Then it forwards requests to https:// host-server.com/foo and feeds the replies back to the original requester. Does this make sense? And would it be at all feasible? My experience with SSL is limited at best, so thanks in advance for your help :) ps gaps in hyperlinks as ServerFault was getting unhappy with the number of links I was posting!

  Read the article

• Windows 2008 R2 file share - any way to "lock it down" outside of a 3rd party app?

  - by TheCleaner

  I have a 3rd party app that "makes a call" to write files to a file share on our network using the currently logged in credentials of the Windows domain user. Meaning the 3rd party app doesn't pass the apps credentials but simply issues a behind the scenes copy command to take a source file specified and copy/move it to the destination "repository" on the file share. The basic premise is that it keeps revisions/approvals for Document Control (think svn/git I guess, similar to this question: Lock down Windows folder to only be updatable by SVN). This all works fine...but here's my issue: I need a way to lock down the file share from being accessed/modified outside of using the 3rd party app (meaning prevent explorer/word/excel/etc from getting to that share). I know I can do the following: make the share a hidden share ($) - this definitely helps. Most users would have zero clue on how to get to such a share. Solves probably 95% of my issue. go one step further and set the "Hidden" attribute on the folders in the hidden share - this would go a little further in that even if a user knows the path to the hidden share like \\server\hidden$ they still won't see folders in that share without changing their explorer options to "show hidden files/folder Any other ideas on how I can lock this down? The users still need modify rights to this share/folders since the 3rd party app relies on their Windows permissions to that location when copying the files into it. I can't really use 3rd party tools to password protect the folder/share without causing the 3rd party app functions to fail.

  Read the article

• hosting company blocking google bots and crawlers [closed]

  - by Jayapal Chandran

  Hi, I am having a site for the past three years and it is very active for the past two years. Until not the site is working well and also now but not after the hosting company blocked google bots. Many pages appeared in the first page of the google search. After they started blocking i couldn't see my links in the first page instead they appeared after 5 pages or they did not appear at all. Will hosting companies be so stupid that they block and dont mention it to their users. They want to protect themselves by making the websites at stake. I display google ads and not this month i got only half for this 10 days. I have made requests to other hosting companies like blue host and monster host that i wan to transfer my domain by making a condition that the will not block google bots which stops the business indirectly. so any kind of help will be helpful. how can i claim what i lost from the hosting company. what other hosting companies consider the users (by informing the events like changing the IP or blocking google bot.) It was really working hard to bring up my site but these people just crashed down my site in a few days. :-(

  Read the article

• SSH does not allow the use of a key with group readable permissions

  - by scjr

  I have a development git server that deploys to a live server when the live branch is pushed to. Every user has their own login and therefore the post-receive hook which does the live deployment is run under their own user. Because I don't want to have to maintain the users public keys as authorized keys on the remote live server I have made up a set of keys that 'belong's to the git system to add to remote live servers (In the post-receive hook I am using $GIT_SSH to set the private key with the -i option). My problem is that because of all the users might want to deploy to live, the git system's private key has to be at least group readable and SSH really doesn't like this. Here's a sample of the error: XXXX@XXXX /srv/git/identity % ssh -i id_rsa XXXXX@XXXXX @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ @ WARNING: UNPROTECTED PRIVATE KEY FILE! @ @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ Permissions 0640 for 'id_rsa' are too open. It is required that your private key files are NOT accessible by others. This private key will be ignored. bad permissions: ignore key: id_rsa I've looked around expecting to find something in the way of forcing ssh to just go through with the connection but I've found nothing but people blindly saying that you just shouldn't allow access to anything but a single user.

  Read the article

• What Media Extender / Centre Set up should I use?

  - by Bryn Hird

  I have installed cat6 throughout the house which I use for telephony and network. In my cellar I have a NAS Server, gigabit switch and I want to install a Media Centre to stream my video's, music, photo's and live TV (coax from the aerial to the cellar) over the cat6. Yeah I know I can get stuff on the internet but shared experience of watching TV as a family as it happens is a big plus for live TV. I'm aiming for 1080p. I want different users to be able to watch different channels. Max users = 4. I've played a little with Windows Media Centre, works fine with live TV. Likewise I have XBMC up and running with live TV. The issue I have is what do I put near the TV. I'd like a consistent user interface (grandma and the the other technophobes in the house are continually pestering me on how to use different TVs, change channel, inputs etc.) so a key part of this for me is to make the user experience the same and simple i.e. no keyboards / PCs hanging around the TV. I've just bought a Linksys DMA 2200 to test the Windows Media Centre, but obviously off eBay as they're a dying breed. And with Windows Media Centre removed from Microsoft plans such devices will get rarer. And as for 1080p, think I can forget it with that set up. I have tested XBOX 360, also works but ditto on Microsoft plans for WMC. I was thinking of a WD Live TV to test the XMBC setup. Now to the question. Any advice on Media Centre / Extender setups that will do the job as above and have some degree of futureproofing (building my own with my Raspberry PI is a last resort). I'd like to understand the standards involved in the futureproofing if anyone knows (DNLA, RVU etc.).

  Read the article

• How can I stop Excel from eating my delicious CSV files and excreting useless data?

  - by atroon

  I have a database which tracks sales of widgets by serial number. Users enter purchaser data and quantity, and scan each widget into a custom client program. They then finalize the order. This all works flawlessly. Some customers want an Excel-compatible spreadsheet of the widgets they have purchased. We generate this with a PHP script which queries the database and outputs the result as a CSV with the store name and associated data. This works perfectly well too. When opened in a text editor such as Notepad or vi, the file looks like this: "Account Number","Store Name","S1","S2","S3","Widget Type","Date" "4173","SpeedyCorp","268435459705526269","","268435459705526269","848 Model Widget","2011-01-17" As you can see, the serial numbers are present (in this case twice, not all secondary serials are the same) and are long strings of numbers. When this file is opened in Excel, the result becomes: Account Number Store Name S1 S2 S3 Widget Type Date 4173 SpeedyCorp 2.68435E+17 2.68435E+17 848 Model Widget 2011-01-17 As you may have observed, the serial numbers are enclosed by double quotes. Excel does not seem to respect text qualifiers in .csv files. When importing these files into Access, we have zero difficulty. When opening them as text, no trouble at all. But Excel, without fail, converts these files into useless garbage. Trying to instruct end users in the art of opening a CSV file with a non-default application is becoming, shall we say, tiresome. Is there hope? Is there a setting I've been unable to find? This seems to be the case with Excel 2003, 2007, and 2010.

  Read the article

• Is there an objective way to measure slowness of PC/WINDOWS?

  - by ekms

  We've a lot of users that usually complain about that his PC is "slow". (we use win XP). We usually check startup programs, virus, fragmentation, disk health and common problems that causes slowness (Symantec AV drops disk to 1mb/s , or a seagate HD firmware error in certain models), but in those cases the slowness is pretty evident. In other hand, the most common is the user complaining about his pc but for us looks OK, even in 6 years old desktops. People sometimes even complains about his new quad core desktops speed!!! So, we are asking if there's a way to OBJECTIVELY check that a computer didn't dropped its performance, compared with similar ones o previous measures, specially for work use (I don't think that 3dmark benchmark o similar may help). The only thing that I found that was useful is HDTune, but it only check hard disk performance. Basically, what we want is something that enable us to say to our users "see? your PC is as slow as was three years ago! stop complaining! Is all in your head!"

  Read the article

• Have .cmd in startup wait for system wide startup to run.

  - by Dan

  On a computer I'm not an administrator on, there is a startup file (.cmd file in C:\Documents and Settings\All Users\Start Menu\Programs\Startup) for all users. It does several things I don't like, so I have created my own .cmd file which I have placed in C:\Documents and Settings\[user]\Start Menu\Programs\Startup. I want my code to run after the system wide, because my program first undoes the network mappings the system wide file did, and then replaces it with my own network mappings. How can I make my program wait and start as soon as the system wide one is done? (I cannot remove or edit the system wide file). Thanks EDIT: The time that the system wide file takes to runs varies and I would like my file to run right after. The "If Exists" method seems a little to contingent since the system wide script can change or a file could be moved. I am hoping to give my script to a few of my coworkers, so hoping to have it work without me having to update anything. Also, being a linux guy, I don't know cmd code, so please write out any coding suggestions.

  Read the article

• Software/hardware to build video streaming server?

  - by Sasha Yanovets

  I am looking for a video streaming server solution, something like online TV server, with ability to make live broadcasts in the internet. What software could you recommend for that? What kind of hardware it should run on, should be there anything special? I am looking for a solution that could be scaled up to at least 1000 simultaneous users online with good resolution of video. I think it is good to have general answer on what direction to choose. But here more details on my specific case: I just looking for a solution almost from scratch. We have some video content that we've produced, but it is not delivered over internet yet. We do not tied to any particular vendor for now. We want to make 24 hours of steaming three 8 hour blocks with change of content every day. We want the ability to make regular live broadcasts. I guess we will need to have several options of streaming quality (low ~56 kb/s mid ~273 kb/s). Some terms just foreign to me (like play-truncation rate), if you could point out what parameters we should avare of, it would be great. Uplink to the internet is to be determined. We plan to start from something and scale up on the way. If you are already have some kind of media streaming server, just describe its configuration here (hardware, OS, software), peak number of concurrent users it serves. I think it could help people approaching this task.

  Read the article

• IIS7.5 - about app pool ID's and folder read/write access

  - by merk

  I did some searching and it looks like for each app pool, there should be an account created called IIS APPPOOL\AppPoolName - however i can see no such account when i try to modify the permissions on a folder to give that app write access. The closest I have found is the IIS_IUSRS group. Now, if i go into that group and look at the members, i see several IIS APPPOOL\PoolName members. But where are these members coming from? Why don't they show up under the users? And why can't i add a specific one to a folder? It doesn't make sense to me to add the IIS_IUSRS group to a folder since they gives every site access to the folder. To be more specific, I'm setting up wordpress and it unfortunately wants write access to the root folder. So i want to restrict it as much a possible. I was trying to figure out how to set it so that the WP root folder has write access only for the ID that the blog's app pool is running under. When i drill down into the IIS_IUSRS group, i do not see the app pool for the blog listed there. The settings for the blog's app pool are: No managed code, Classic, ApplicationPoolIdentity, and it's named 'blog' So any explanations regarding these users that are created for the app pools, and why the blog doesn't seem to belong to the iusrs group? thanks

  Read the article

• Nginx Server Block Not Working? - Already running other vhosts just this one not working

  - by daveaspinall

  Im running a Debian 6 LEMP server with multiple virtual hosts and everything has been fine for 5 or so sites. But I've just tried adding another but for some reason it's just not working. By not working I mean in Chrome I get the "Oops! Google Chrome could not connect to subdomain.domain.net" error. I've changed the domain for security to subdomain.example.com and the IP is masked. Hosts file (I have multiple sub domains): xxx.xxx.xx.xxx *.example.com *.example Server Block: server { listen 80; server_name subdomain.example.com; access_log /srv/www/subdomain.example.com/logs/access.log; error_log /srv/www/subdomain.example.com/logs/error.log; root /srv/www/subdomain.example.com/public_html; location / { index index.html index.htm index.php; } location ~ \.php$ { include fastcgi_params; fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; } } I've created the system link to the file in the /etc/nginx/sites-enabled/ directory and restarted/reloaded nginx. DNS seems fine: # ping -c 2 subdomain PING subdomain.example.com (xxx.xxx.xx.xxx) 56(84) bytes of data. 64 bytes from www.example.com (xxx.xxx.xx.xxx): icmp_req=1 ttl=64 time=0.035 ms 64 bytes from www.example.com (xxx.xxx.xx.xxx): icmp_req=2 ttl=64 time=0.048 ms Checking the file with cURL works: # curl http://subdomain.example.com HTML - OK Emptied browser cache but still no dice. Anything I'm missing? Like I mentioned, I have a few sites running fine on the server currently so php-fpm etc etc are working. Any help would be much appreciated! Cheers, Dave

  Read the article

• Apache: Isn't chmod 755 enough to set up symlink or alias on Apache httpd on Mac OS 10.5?

  - by eed3si9n

  On my Mac OS 10.5 machine, I would like to set up a subfolder of ~/Documents like ~/Documents/foo/html to be http://localhost/foo. The first thing I thought of doing is using Alias as follows: Alias /foo /Users/someone/Documents/foo/html <Directory "/Users/someone/Documents/foo/html"> Options Indexes FollowSymLinks MultiViews Order allow,deny Allow from all </Directory> This got me 403 Forbidden. In the error_log I got: [error] [client ::1] (13)Permission denied: access to /foo denied The subfolder in question has chmod 755 access. I've tried specifying likes like http://localhost/foo/test.php, but that didn't work either. Next, I tried the symlink route. Went into /Library/WebServer/Documents and made a symlink to ~/Documents/foo/html. The document root has Options Indexes FollowSymLinks MultiViews This still got me 403 Forbidden: Symbolic link not allowed or link target not accessible: /Library/WebServer/Documents/foo What else do I need to set this up? Solution: $ chmod 755 ~/Documents In general, the folder to be shared and all of its ancestor folder needs to be viewable by the www service user.

  Read the article

• How to Set Up an SMTP Submission Server on Linux

  - by Kevin Cox

  I was trying to set up a mail server with no luck. I want it to accept mail from authenticated users only and deliver them. I want the users to be able to connect over the internet. Ideally the mail server wouldn't accept any incoming mail. Essentially I want it to accept messages on a receiving port and transfer them to the intended recipient out port 25. If anyone has some good links and guides that would be awesome. I am quite familiar with linux but have never played around with MTA's and am currently running debian 6. More Specific Problem! Sorry, that was general and postfix is complex. I am having trouble enabling the submission port with encryption and authentication. What Works: Sending mail from the local machine. (sendmail [email protected]). Ports are open. (25 and 587) Connecting to 587 appears to work, I get a "need to starttls" warning and starttls appears to work. But when I try to connect with the next command I get the error below. # openssl s_client -connect localhost:587 -starttls smtp CONNECTED(00000003) depth=0 /CN=localhost.localdomain verify error:num=18:self signed certificate verify return:1 depth=0 /CN=localhost.localdomain verify return:1 --- Certificate chain 0 s:/CN=localhost.localdomain i:/CN=localhost.localdomain --- Server certificate -----BEGIN CERTIFICATE----- MIICvDCCAaQCCQCYHnCzLRUoMTANBgkqhkiG9w0BAQUFADAgMR4wHAYDVQQDExVs b2NhbGhvc3QubG9jYWxkb21haW4wHhcNMTIwMjE3MTMxOTA1WhcNMjIwMjE0MTMx OTA1WjAgMR4wHAYDVQQDExVsb2NhbGhvc3QubG9jYWxkb21haW4wggEiMA0GCSqG SIb3DQEBAQUAA4IBDwAwggEKAoIBAQDEFA/S6VhJihP6OGYrhEtL+SchWxPZGbgb VkgNJ6xK2dhR7hZXKcDtNddL3uf1YYWF76efS5oJPPjLb33NbHBb9imuD8PoynXN isz1oQEbzPE/07VC4srbsNIN92lldbRruDfjDrAbC/H+FBSUA2ImHvzc3xhIjdsb AbHasG1XBm8SkYULVedaD7I7YbnloCx0sTQgCM0Vjx29TXxPrpkcl6usjcQfZHqY ozg8X48Xm7F9CDip35Q+WwfZ6AcEkq9rJUOoZWrLWVcKusuYPCtUb6MdsZEH13IQ rA0+x8fUI3S0fW5xWWG0b4c5IxuM+eXz05DvB7mLyd+2+RwDAx2LAgMBAAEwDQYJ KoZIhvcNAQEFBQADggEBAAj1ib4lX28FhYdWv/RsHoGGFqf933SDipffBPM6Wlr0 jUn7wler7ilP65WVlTxDW+8PhdBmOrLUr0DO470AAS5uUOjdsPgGO+7VE/4/BN+/ naXVDzIcwyaiLbODIdG2s363V7gzibIuKUqOJ7oRLkwtxubt4D0CQN/7GNFY8cL2 in6FrYGDMNY+ve1tqPkukqQnes3DCeEo0+2KMGuwaJRQK3Es9WHotyrjrecPY170 dhDiLz4XaHU7xZwArAhMq/fay87liHvXR860tWq30oSb5DHQf4EloCQK4eJZQtFT B3xUDu7eFuCeXxjm4294YIPoWl5pbrP9vzLYAH+8ufE= -----END CERTIFICATE----- subject=/CN=localhost.localdomain issuer=/CN=localhost.localdomain --- No client certificate CA names sent --- SSL handshake has read 1605 bytes and written 354 bytes --- New, TLSv1/SSLv3, Cipher is DHE-RSA-AES256-SHA Server public key is 2048 bit Secure Renegotiation IS supported Compression: NONE Expansion: NONE SSL-Session: Protocol : TLSv1 Cipher : DHE-RSA-AES256-SHA Session-ID: E07926641A5EF22B15EB1D0E03FFF75588AB6464702CF4DC2166FFDAC1CA73E2 Session-ID-ctx: Master-Key: 454E8D5D40380DB3A73336775D6911B3DA289E4A1C9587DDC168EC09C2C3457CB30321E44CAD6AE65A66BAE9F33959A9 Key-Arg : None Start Time: 1349059796 Timeout : 300 (sec) Verify return code: 18 (self signed certificate) --- 250 DSN read:errno=0 If I try to connect from evolution I get the following error: The reported error was "HELO command failed: TCP connection reset by peer".

  Read the article

• Extracting information from active directory

  - by Nop at NaDa

  I work in the IT support department of a branch of a huge company. I have to take care of a database with all the users, computers, etc. I'm trying to find a way to automatically update the database as much as possible, but the IT infrastructure guys doesn't give me enough privileges to use Active Directory in order to dump the users, nor they have the time to give me the information that I need. Some days ago I found Active Directory explorer from Sysinternals that allows me to browse through Active Directory, and I found all the information that I need there (username, real name, date when it was created, privileges, company, etc.). Unfortunately I'm unable to export the data to a human readable format. I'm just able to take a snapshot of the whole database in a machine-readable format. Doing the snapshot takes hours and I'm afraid that the infrastructure guys won't like me doing entire snapshots on a regular basis. Do you know of any tool (command-line is preferable) that would allow me to retrieve the values of the keys or export it to XML, CSV, etc?

  Read the article

• MySQL based authentication with crypt()ed password fails in Apache 2.2

  - by Fester Bestertester

  I'm trying to set up a simple CalDAV/CardDAV server with a Radicale backend and an Apache 2.2 frontend. So far, it's all nice and simple, but I can't get the MySQL based authentication to work. I'd like to authenticate users against an existing MySQL database, and I need the REMOTE_USER variable to be set (pretty much like in the configuration examples for Radicale). I've tried mod_auth_mysql, which authenticated the users nicely, but failed to set the REMOTE_USER variable. The newer alternative seems to be mod_authn_dbd, which doesn't seem to like the crypted passwords in the MySQL database. According to the documentation, crypted passwords should work, so maybe I'm just missing a simple parameter. The configuration looks like this: DBDriver mysql DBDParams "sock=/var/run/mysqld/mysqld.sock dbname=myAuthDB user=myAuthUser pass=myAuthPW <Directory /> AllowOverride None Order allow,deny allow from all AuthName 'CalDav' AuthType Basic AuthBasicProvider dbd require valid-user AuthDBDUserPWQuery "SELECT crypt FROM myAuthTable WHERE id=%s" </Directory> I've tested the query, it works fine. And as mentioned before, mod_auth_mysql worked nicely against the same database, but didn't set the required variables. Am I just missing some configuration parameter? Or is mod_authn_dbd just not the right tool to achieve what I want?

  Read the article

• Cisco configuration for public library internet

  - by AlternateZ

  I'm a C/C++ computer programmer turned IT support guy working for a public library. My day is usually spent helping random grandparents learn how to use email, so my networking knowledge is limited to what I can glean from google. Here's the situation. We have a public library with 20 PCs on a LAN and also public wifi access. Previously we were running all of this on 1 ADSL connection and people complained about low speeds. We hired a networking company to set up a Cisco dual-WAN router for us, and purchased an additional ADSL connection. The intention was to give the LAN PCs a guaranteed amount of bandwidth each, and then let the wifi users split the rest. The results were far worse than what we expected, and all we got from the company was excuses and they've since washed their hands of us. During busy periods, net performance on the LAN PCs are so poor that attaching files to gmail etc often times out and fails - far from the "guaranteed amount of bandwidth each" that we hope for! Sometimes it feels like performance is worse than before when we had 1 ADSL link and an unconfigured router? Anyways, surely this is a problem encountered a million times over across the world? (Sharing internet across many users effectively.) What are standard solutions for something like this? I admit to not even knowing the right jargon to google for (load balancing?) I'd appreciate any links to resources/guides that might help me get a better understanding of the problem/solutions, and perhaps some stories of your own experience in solving similar problems. This will help us evaluate and negotiate with network consultants in the future. If its relevant, our router config contains a section "policy-map" with "bandwidth percent" for each class of user (LAN, wifi), and "fair queue".

  Read the article

• windows xp cannot access admin share

  - by barlop

  I have 3 systems. A,B,Compx all on xp. but comps A and B have an issue with Compx. Compx has network shares I can access. I can do \\compx and get some. But I cannot access the admin share c$ \\compx\c$ gives a login prompt, and I can't get any user/pass to work. I looked at permissions but don't see an issue. Nevertheless, I will describe what I see in the permissions. In the security tab of C, I have Administrators,creator owner,everyone,bob,system,users (6 things there) "creator owner" has nothing ticked, I can't seem to change that. If I tick so they all get ticked, and click apply, 2.5min and it's completed its opration and they all untick. Though this isn't the root of the problem. Since I get the same in the share I can access. In advanced, I see those 6 things, Administrators,creator owner,everyone,bob,system,users (6 things there) all "full control" all are "this folder, subfolders and files".. except creator owner, which is just subfolders and files only I look at the properties for the share I can see. looks the same, except in security..advanced, double clicking any of them the boxes are all ticked but greyed. That's not the problem though since I can access that share. So, I don't know what the problem is.

  Read the article

• can't register a soft phone to asterisk11

  - by Tom

  I have a VM (on oracle vbox) running Fedora17. I've installed asterisk 11 on it from sources. I've followed the wiki for installation (https://wiki.asterisk.org/wiki/display/AST/Creating+SIP+Accounts) to the letter. The ip on the VM machine running fedora is 192.168.1.7 and I can ping it from the host machine (Ubuntu 12.04), which is at 192.168.1.2 I've tried registering with ekiga with the following settings: user: [email protected]. Password: verysecretpassword registar: 192.168.1.7 but I'm getting an error "transport fail". Also, while trying to register I'm logged in to the asterisk CLI with verbose level 3 and debug level 4 and nothing appears. some more relevant data: I've added the following code to the end of my sip.conf.sample file: [demo-alice] type=friend host=dynamic secret=verysecretpassword context=users deny=0.0.0.0/0 permit=192.168.1.0/255.255.255.0 [demo-bob] type=friend host=dynamic secret=othersecretpassword context=users deny=0.0.0.0/0 permit=192.168.1.0/255.255.255.0 After I changed the sip.conf.sample file, I've created a copy of it and named it sip.conf. then I logged in to the asterisk CLI and typed sip reload. Then I'm trying to register and ekiga client from my host machine at 192.168.1.2 but it doesn't work and nothing appears on the asterisk CLI while in verbose mode level 3. BTW, If there is missing information about my question, please don't close it. comment about what you need to know and I'll edit it in to the question. tnx.

  Read the article

• Httpd and LDAP Authentication not working for sub-pages

  - by DavisTasar

  I just recently installed a Nagios implementation, and I'm trying to get LDAP authentication working for httpd on Red Hat. (nagios.conf for Apache config below, sanitized of course) ScriptAlias /nagios/cgi-bin "/usr/local/nagios/sbin" <Directory "/usr/local/nagios/sbin"> #SSLRequireSSL Options ExecCGI AllowOverride none AuthType Basic AuthName "LDAP Authentication" AuthLDAPURL "ldap://my.domain.controller:389/OU=Users,DC=my,DC=domain,DC=controller?sAMAccountName?sub?(objectClass=user)" NONE AuthzLDAPAuthoritative off AuthLDAPBindDN "CN=NagiosAdmin,DC=my,DC=domain,DC=controller" AuthLDAPBindPassword "myPassword" require valid-user </Directory> Alias /nagios "/usr/local/nagios/share" <Directory /usr/local/nagios/share> #SSLRequireSSL Options None AllowOverride none AuthBasicProvider ldap AuthType Basic AuthName "LDAP Authentication" AuthzLDAPAuthoritative off AuthLDAPURL "ldap://my.domain.controller:389/OU=Users,DC=my,DC=domain,DC=controller?sAMAccountName?sub?(objectClass=user)" NONE AuthLDAPBindDN "CN=NagiosAdmin,DC=my,DC=domain,DC=controller" AuthLDAPBindPassword "myPassword" require valid-user </Directory> Now, the initial authentication works, so when you first hit the page you can log in just fine. However, when you go anywhere else, it prompts you for authentication, fails (asking for a re-prompt), and gives this error message: [Mon Oct 21 14:46:23 2013] [error] [client 172.28.9.30] access to /nagios/cgi-bin/statusmap.cgi failed, reason: verification of user id '<myuseraccount>' not configured, referer: http://<nagiosserver>/nagios/side.php I'm almost certain its a simple flag or option, but I just can't find it, and I don't have a lot of experience working with Apache. Any assistance or help would be greatly appreciated.

  Read the article

< Previous Page | 650 651 652 653 654 655 656 657 658 659 660 661  | Next Page >