Search Results

Search found 18244 results on 730 pages for 'controller action'.

Page 656/730 | < Previous Page | 652 653 654 655 656 657 658 659 660 661 662 663  | Next Page >

• Optimal setup for ASUS P6X58D Premium BIOS (no OC)?

  - by rumtscho

  Normally, I'd trust the mainboard manufacturer to choose the best options as defaults. But I had trouble with the board, because even with Quick Boot enabled, it booted twice as slowly as a Pentium 4 Celeron. Then I changed lots of options at once (most of them weren't explained in the manual, just mentioned with a single sentence) and the boot time is only marginally worse than the Pentium 4 (54 sec against 46 sec from button to pw entering screen). Now I don't know if I have turned something off which should have stayed on. I guess I even won't be able to boot from a CD now, because even though it is present in the boot sequence, I took off a timeout I think it needs to check whether there is a disk in the drive. The second reason is that I don't have an internal HDD, only a SSD. I forgot my sources blush but I am under the impression that today's BIOS and OS options are geared toward booting from a HDD, which is often less than optimal when one boots from a SSD, especially when there are functions which cause avoidable writing cycles, as a SSD wears out after too many writing cycles. Most of the things I've read concern the OS, but there are some BIOS-relevant options too. I am especially confused about the disk mode. The board supports AHCI, IDE-simulation and RAID, but of the different articles I've read, there is a proponent for each and no clear arguments for any. So can one tell me which options are important in general and which are important for a SSD-only system? I don't want to overclock the CPU, so you don't have to say anything about this (yes I know the board is meant for OC:)). I am thinking of overclocking the RAM, since they sold me 1600er heatsinked modules which are running at 1066 now, but I'm not sure yet about that. The rest of the system: i7-930, Intel X25-m G2, 6 GB RAM, GTS 250, some no-name Blue-ray ROM. 2 external HDDs over USB 2.0. Lots of other USB-connected hardware (12 devices I think), no SATA 3 drives (will disabling the controller have an impact on performance?), no LAN, only WiFi. Lucid Lynx 64 bit, no dual boot, no virtual installations. The main uses of the system are: managing and playing/showing all the media stored on the external disks, lots of image manipulation, some video editing, a bit of (non-demanding) gaming, rarely development. Lots of Internet surfing too, but this shouldn't have much impact on performance.

  Read the article

• How do I parse file paths separated by a space in a string?

  - by user1130637

  Background: I am working in Automator on a wrapper to a command line utility. I need a way to separate an arbitrary number of file paths delimited by a single space from a single string, so that I may remove all but the first file path to pass to the program. Example input string: /Users/bobby/diddy dum/ding.mp4 /Users/jimmy/gone mia/come back jimmy.mp3 ... Desired output: /Users/bobby/diddy dum/ding.mp4 Part of the problem is the inflexibility on the Automator end of things. I'm using an Automator action which returns unescaped POSIX filepaths delimited by a space (or comma). This is unfortunate because: 1. I cannot ensure file/folder names will not contain either a space or comma, and 2. the only inadmissible character in Mac OS X filenames (as far as I can tell) is :. There are options which allow me to enclose the file paths in double or single quotes, or angle brackets. The program itself accepts the argument of the aforementioned input string, so there must be a way of separating the paths. I just do not have a keen enough eye to see how to do it with sed or awk. At first I thought I'll just use sed to replace every [space]/ with [newline]/ and then trim all but the first line, but that leaves the loophole open for folders whose names end with a space. If I use the comma delimiter, the same happens, just for a comma instead. If I encapsulate in double or single quotation marks, I am opening another can of worms for filenames with those characters. The image/link is the relevant part of my Automator workflow. -- UPDATE -- I was able to achieve what I wanted in a rather roundabout way. It's hardly elegant but here is working generalized code: path="/Users/bobby/diddy dum/ding.mp4 /Users/jimmy/gone mia/come back jimmy.mp3" # using colon because it's an inadmissible Mac OS X # filename character, perfect for separating # also, unlike [space], multiple colons do not collapse IFS=: # replace all spaces with colons colpath=$(echo "$path" | sed 's/ /:/g') # place words from colon-ized file path into array # e.g. three spaces -> three colons -> two empty words j=1 for word in $colpath do filearray[$j]="$word" j=$j+1 done # reconstruct file path word by word # after each addition, check file existence # if non-existent, re-add lost [space] and continue until found name="" for seg in "${filearray[@]}" do name="$name$seg" if [[ -f "$name" ]] then echo "$name" break fi name="$name " done All this trouble because the default IFS doesn't count "emptiness" between the spaces as words, but rather collapses them all.

  Read the article

• prevent filesystem from entering read-only mode

  - by user788171

  I have found that my server's filesystem is continuously entering read-only mode. There have been some issues with the raid1 array, but I have removed the bad disk from the array. However, it is still physically plugged into the system because I haven't had a chance to go over to the datacentre, I suspect udev and the system kernel is still picking up the bad disk and throwing errors. In /var/log/messages, there are errors like this: Mar 2 06:53:14 nocloud kernel: ata1: exception Emask 0x10 SAct 0x0 SErr 0x4010000 action 0xe frozen Mar 2 06:53:14 nocloud kernel: ata1: irq_stat 0x00400040, connection status changed Mar 2 06:53:14 nocloud kernel: ata1: SError: { PHYRdyChg DevExch } Mar 2 06:53:14 nocloud kernel: ata1: hard resetting link Mar 2 06:53:20 nocloud kernel: ata1: link is slow to respond, please be patient (ready=0) Mar 2 06:53:21 nocloud kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Mar 2 06:53:21 nocloud kernel: ata1.00: configured for UDMA/133 Mar 2 06:53:21 nocloud kernel: ata1: EH complete This happens fairly randomly throughout the day until eventually the filesystem becomes read-only. When this happens, my system becomes non-operational which kind of defeats the purpose of having a raid1. Note, ata1 is the bad disk (I think ata1 corresponds to /dev/sda because they are both first in line). Under mdadm, /dev/sda1,2 is no longer being used, but I can't prevent the system kernel from continuing to query that disk when I am no longer using it and throwing these errors. Is there a way to prevent my filesystem from automatically going into read-only mode? Furthermore, is it safe to do so? Thanks in advance. EDIT: Additional information: output from cat /proc/mdstat md1 : active raid1 sdb2[1] 976554876 blocks super 1.1 [2/1] [_U] bitmap: 5/8 pages [20KB], 65536KB chunk md0 : active raid1 sdb1[1] 204788 blocks super 1.0 [2/1] [_U] Output from mount: /dev/mapper/VolGroup-LogVol00 on / type ext4 (rw,noatime) proc on /proc type proc (rw) sysfs on /sys type sysfs (rw) devpts on /dev/pts type devpts (rw,gid=5,mode=620) tmpfs on /dev/shm type tmpfs (rw,rootcontext="system_u:object_r:tmpfs_t:s0") /dev/md0 on /boot type ext4 (rw) none on /proc/sys/fs/binfmt_misc type binfmt_misc (rw) sunrpc on /var/lib/nfs/rpc_pipefs type rpc_pipefs (rw) EDIT2: pvdisplay output: --- Physical volume --- PV Name /dev/md1 VG Name VolGroup PV Size 931.32 GiB / not usable 2.87 MiB Allocatable yes (but full) PE Size 16.00 MiB Total PE 59604 Free PE 0 Allocated PE 59604

  Read the article

• Ubuntu 10.04 not detecting multiple monitors

  - by user28837

  I have 2 graphics cards, the output from the lspci: 01:00.0 VGA compatible controller: ATI Technologies Inc RV770 [Radeon HD 4850] 02:00.0 VGA compatible controller: ATI Technologies Inc RV710 [Radeon HD 4350] I have one monitor connected to the 4850 and 2 connected to the 4350. However when I go into System Preferences Monitors the only monitor shown is the one connected to the 4850. Is there something I need to enable for it to be able to use the other card? How do I get this to work. Thanks. As per request: X.Org X Server 1.7.6 Release Date: 2010-03-17 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.24-25-server i686 Ubuntu Current Operating System: Linux jeff-desktop 2.6.32-22-generic-pae #33-Ubuntu SMP Wed Apr 28 14:57:29 UTC 2010 i686 Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-22-generic-pae root=UUID=852e1013-4ed6-40fd-a462-c29087888383 ro quiet splash Build Date: 23 April 2010 05:11:50PM xorg-server 2:1.7.6-2ubuntu7 (Bryce Harrington <[email protected]>) Current version of pixman: 0.16.4 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Tue May 11 08:24:52 2010 (==) Using config file: "/etc/X11/xorg.conf" (==) Using config directory: "/usr/lib/X11/xorg.conf.d" (==) No Layout section. Using the first Screen section. (**) |-->Screen "Default Screen" (0) (**) | |-->Monitor "<default monitor>" (==) No device specified for screen "Default Screen". Using the first device section listed. (**) | |-->Device "Default Device" (==) No monitor specified for screen "Default Screen". Using a default monitor configuration. (==) Automatically adding devices (==) Automatically enabling devices (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. Entry deleted from font path. (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/75dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, /usr/share/fonts/X11/75dpi, /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType, built-ins (==) ModulePath set to "/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules" (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. (II) Loader magic: 0x81f0e80 (II) Module ABI versions: X.Org ANSI C Emulation: 0.4 X.Org Video Driver: 6.0 X.Org XInput driver : 7.0 X.Org Server Extension : 2.0 (++) using VT number 7 (--) PCI:*(0:1:0:0) 1002:9442:174b:e104 ATI Technologies Inc RV770 [Radeon HD 4850] rev 0, Mem @ 0xc0000000/268435456, 0xfe7e0000/65536, I/O @ 0x0000a000/256, BIOS @ 0x????????/131072 (--) PCI: (0:2:0:0) 1002:954f:1462:1618 ATI Technologies Inc RV710 [Radeon HD 4350] rev 0, Mem @ 0xd0000000/268435456, 0xfe8e0000/65536, I/O @ 0x0000b000/256, BIOS @ 0x????????/131072 (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory) (II) "extmod" will be loaded by default. (II) "dbe" will be loaded by default. (II) "glx" will be loaded. This was enabled by default and also specified in the config file. (II) "record" will be loaded by default. (II) "dri" will be loaded by default. (II) "dri2" will be loaded by default. (II) LoadModule: "glx" (II) Loading /usr/lib/xorg/extra-modules/modules/extensions/libglx.so (II) Module glx: vendor="FireGL - ATI Technologies Inc." compiled for 7.5.0, module version = 1.0.0 (II) Loading extension GLX (II) LoadModule: "extmod" (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 1.7.6, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "dbe" (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so (II) Module dbe: vendor="X.Org Foundation" compiled for 1.7.6, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "record" (II) Loading /usr/lib/xorg/modules/extensions/librecord.so (II) Module record: vendor="X.Org Foundation" compiled for 1.7.6, module version = 1.13.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension RECORD (II) LoadModule: "dri" (II) Loading /usr/lib/xorg/modules/extensions/libdri.so (II) Module dri: vendor="X.Org Foundation" compiled for 1.7.6, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension XFree86-DRI (II) LoadModule: "dri2" (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so (II) Module dri2: vendor="X.Org Foundation" compiled for 1.7.6, module version = 1.1.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DRI2 (II) LoadModule: "fglrx" (II) Loading /usr/lib/xorg/extra-modules/modules/drivers/fglrx_drv.so (II) Module fglrx: vendor="FireGL - ATI Technologies Inc." compiled for 1.7.1, module version = 8.72.11 Module class: X.Org Video Driver (II) Loading sub module "fglrxdrm" (II) LoadModule: "fglrxdrm" (II) Loading /usr/lib/xorg/extra-modules/modules/linux/libfglrxdrm.so (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc." compiled for 1.7.1, module version = 8.72.11 (II) ATI Proprietary Linux Driver Version Identifier:8.72.11 (II) ATI Proprietary Linux Driver Release Identifier: 8.723.1 (II) ATI Proprietary Linux Driver Build Date: Apr 8 2010 21:40:29 (II) Primary Device is: PCI 01@00:00:0 (WW) Falling back to old probe method for fglrx (II) Loading PCS database from /etc/ati/amdpcsdb (--) Assigning device section with no busID to primary device (WW) fglrx: No matching Device section for instance (BusID PCI:0@2:0:0) found (--) Chipset Supported AMD Graphics Processor (0x9442) found (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found (WW) fglrx: No matching Device section for instance (BusID PCI:0@2:0:1) found (**) ChipID override: 0x954F (**) Chipset Supported AMD Graphics Processor (0x954F) found (II) AMD Video driver is running on a device belonging to a group targeted for this release (II) AMD Video driver is signed (II) fglrx(0): pEnt->device->identifier=0x9428aa0 (II) pEnt->device->identifier=(nil) (II) fglrx(0): === [atiddxPreInit] === begin (II) Loading sub module "vgahw" (II) LoadModule: "vgahw" (II) Loading /usr/lib/xorg/modules/libvgahw.so (II) Module vgahw: vendor="X.Org Foundation" compiled for 1.7.6, module version = 0.1.0 ABI class: X.Org Video Driver, version 6.0 (II) fglrx(0): Creating default Display subsection in Screen section "Default Screen" for depth/fbbpp 24/32 (**) fglrx(0): Depth 24, (--) framebuffer bpp 32 (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps) (==) fglrx(0): Default visual is TrueColor (==) fglrx(0): RGB weight 888 (II) fglrx(0): Using 8 bits per RGB (==) fglrx(0): Buffer Tiling is ON (II) Loading sub module "fglrxdrm" (II) LoadModule: "fglrxdrm" (II) Reloading /usr/lib/xorg/extra-modules/modules/linux/libfglrxdrm.so ukiDynamicMajor: found major device number 251 ukiDynamicMajor: found major device number 251 ukiOpenByBusid: Searching for BusID PCI:1:0:0 ukiOpenDevice: node name is /dev/ati/card0 ukiOpenDevice: open result is 10, (OK) ukiOpenByBusid: ukiOpenMinor returns 10 ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0 ukiOpenDevice: node name is /dev/ati/card1 ukiOpenDevice: open result is 10, (OK) ukiOpenByBusid: ukiOpenMinor returns 10 ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0 ukiDynamicMajor: found major device number 251 ukiDynamicMajor: found major device number 251 ukiOpenByBusid: Searching for BusID PCI:2:0:0 ukiOpenDevice: node name is /dev/ati/card0 ukiOpenDevice: open result is 11, (OK) ukiOpenByBusid: ukiOpenMinor returns 11 ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0 (--) fglrx(0): Chipset: "ATI Radeon HD 4800 Series" (Chipset = 0x9442) (--) fglrx(0): (PciSubVendor = 0x174b, PciSubDevice = 0xe104) (==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI (--) fglrx(0): Linear framebuffer (phys) at 0xc0000000 (--) fglrx(0): MMIO registers at 0xfe7e0000 (--) fglrx(0): I/O port at 0x0000a000 (==) fglrx(0): ROM-BIOS at 0x000c0000 (II) fglrx(0): AC Adapter is used (II) fglrx(0): Primary V_BIOS segment is: 0xc000 (II) Loading sub module "vbe" (II) LoadModule: "vbe" (II) Loading /usr/lib/xorg/modules/libvbe.so (II) Module vbe: vendor="X.Org Foundation" compiled for 1.7.6, module version = 1.1.0 ABI class: X.Org Video Driver, version 6.0 (II) fglrx(0): VESA BIOS detected (II) fglrx(0): VESA VBE Version 3.0 (II) fglrx(0): VESA VBE Total Mem: 16384 kB (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS (II) fglrx(0): VESA VBE OEM Software Rev: 11.13 (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc. (II) fglrx(0): VESA VBE OEM Product: RV770 (II) fglrx(0): VESA VBE OEM Product Rev: 01.00 (II) fglrx(0): ATI Video BIOS revision 9 or later detected (--) fglrx(0): Video RAM: 524288 kByte, Type: GDDR3 (II) fglrx(0): PCIE card detected (--) fglrx(0): Using per-process page tables (PPPT) as GART. (WW) fglrx(0): board is an unknown third party board, chipset is supported (--) fglrx(0): Chipset: "ATI Radeon HD 4300/4500 Series" (Chipset = 0x954f) (--) fglrx(0): (PciSubVendor = 0x1462, PciSubDevice = 0x1618) (==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI (--) fglrx(0): Linear framebuffer (phys) at 0xd0000000 (--) fglrx(0): MMIO registers at 0xfe8e0000 (--) fglrx(0): I/O port at 0x0000b000 (==) fglrx(0): ROM-BIOS at 0x000c0000 (II) fglrx(0): AC Adapter is used (II) fglrx(0): Invalid ATI BIOS from int10, the adapter is not VGA-enabled (II) fglrx(0): ATI Video BIOS revision 9 or later detected (--) fglrx(0): Video RAM: 524288 kByte, Type: DDR2 (II) fglrx(0): PCIE card detected (--) fglrx(0): Using per-process page tables (PPPT) as GART. (WW) fglrx(0): board is an unknown third party board, chipset is supported (II) fglrx(0): Using adapter: 1:0.0. (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x20000000) (II) fglrx(0): Interrupt handler installed at IRQ 31. (II) fglrx(0): Using adapter: 2:0.0. (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x20000000) (II) fglrx(0): RandR 1.2 support is enabled! (II) fglrx(0): RandR 1.2 rotation support is enabled! (==) fglrx(0): Center Mode is disabled (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/lib/xorg/modules/libfb.so (II) Module fb: vendor="X.Org Foundation" compiled for 1.7.6, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.4 (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Module "ddc" already built-in (II) fglrx(0): Finished Initialize PPLIB! (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Module "ddc" already built-in (II) fglrx(0): Connected Display0: DFP on external TMDS [tmds2] (II) fglrx(0): Display0 EDID data --------------------------- (II) fglrx(0): Manufacturer: DEL Model: a038 Serial#: 810829397 (II) fglrx(0): Year: 2008 Week: 51 (II) fglrx(0): EDID Version: 1.3 (II) fglrx(0): Digital Display Input (II) fglrx(0): Max Image Size [cm]: horiz.: 53 vert.: 30 (II) fglrx(0): Gamma: 2.20 (II) fglrx(0): DPMS capabilities: StandBy Suspend Off (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 (II) fglrx(0): Default color space is primary color space (II) fglrx(0): First detailed timing is preferred mode (II) fglrx(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600 (II) fglrx(0): blueX: 0.150 blueY: 0.060 whiteX: 0.312 whiteY: 0.329 (II) fglrx(0): Supported established timings: (II) fglrx(0): 720x400@70Hz (II) fglrx(0): 640x480@60Hz (II) fglrx(0): 640x480@75Hz (II) fglrx(0): 800x600@60Hz (II) fglrx(0): 800x600@75Hz (II) fglrx(0): 1024x768@60Hz (II) fglrx(0): 1024x768@75Hz (II) fglrx(0): 1280x1024@75Hz (II) fglrx(0): Manufacturer's mask: 0 (II) fglrx(0): Supported standard timings: (II) fglrx(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337 (II) fglrx(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 (II) fglrx(0): #2: hsize: 1920 vsize 1080 refresh: 60 vid: 49361 (II) fglrx(0): Supported detailed timing: (II) fglrx(0): clock: 148.5 MHz Image Size: 531 x 298 mm (II) fglrx(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0 (II) fglrx(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0 (II) fglrx(0): Serial No: Y183D8CF0TFU (II) fglrx(0): Monitor name: DELL S2409W (II) fglrx(0): Ranges: V min: 50 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 170 MHz (II) fglrx(0): EDID (in hex): (II) fglrx(0): 00ffffffffffff0010ac38a055465430 (II) fglrx(0): 3312010380351e78eeee91a3544c9926 (II) fglrx(0): 0f5054a54b00714f8180d1c001010101 (II) fglrx(0): 010101010101023a801871382d40582c (II) fglrx(0): 4500132a2100001e000000ff00593138 (II) fglrx(0): 3344384346305446550a000000fc0044 (II) fglrx(0): 454c4c205332343039570a20000000fd (II) fglrx(0): 00324c1e5311000a2020202020200059 (II) fglrx(0): End of Display0 EDID data -------------------- (II) fglrx(0): Output DFP2 has no monitor section (II) fglrx(0): Output DFP_EXTTMDS has no monitor section (II) fglrx(0): Output CRT1 has no monitor section (II) fglrx(0): Output CRT2 has no monitor section (II) fglrx(0): Output DFP2 disconnected (II) fglrx(0): Output DFP_EXTTMDS connected (II) fglrx(0): Output CRT1 disconnected (II) fglrx(0): Output CRT2 disconnected (II) fglrx(0): Using exact sizes for initial modes (II) fglrx(0): Output DFP_EXTTMDS using initial mode 1920x1080 (II) fglrx(0): DPI set to (96, 96) (II) fglrx(0): Adapter ATI Radeon HD 4800 Series has 2 configurable heads and 1 displays connected. (==) fglrx(0): QBS disabled (==) fglrx(0): PseudoColor visuals disabled (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Module "ramdac" already built-in (==) fglrx(0): NoAccel = NO (==) fglrx(0): NoDRI = NO (==) fglrx(0): Capabilities: 0x00000000 (==) fglrx(0): CapabilitiesEx: 0x00000000 (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so" (==) fglrx(0): UseFastTLS=0 (==) fglrx(0): BlockSignalsOnLock=1 (--) Depth 24 pixmap format is 32 bpp (II) Loading extension ATIFGLRXDRI (II) fglrx(0): doing swlDriScreenInit (II) fglrx(0): swlDriScreenInit for fglrx driver ukiDynamicMajor: found major device number 251 ukiDynamicMajor: found major device number 251 ukiDynamicMajor: found major device number 251 ukiOpenByBusid: Searching for BusID PCI:1:0:0 ukiOpenDevice: node name is /dev/ati/card0 ukiOpenDevice: open result is 17, (OK) ukiOpenByBusid: ukiOpenMinor returns 17 ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0 ukiOpenDevice: node name is /dev/ati/card1 ukiOpenDevice: open result is 17, (OK) ukiOpenByBusid: ukiOpenMinor returns 17 ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0 (II) fglrx(0): [uki] DRM interface version 1.0 (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0" (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000 (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0xb6996000 (II) fglrx(0): [uki] framebuffer handle = 0x3000 (II) fglrx(0): [uki] added 1 reserved context for kernel (II) fglrx(0): swlDriScreenInit done (II) fglrx(0): Kernel Module Version Information: (II) fglrx(0): Name: fglrx (II) fglrx(0): Version: 8.72.11 (II) fglrx(0): Date: Apr 8 2010 (II) fglrx(0): Desc: ATI FireGL DRM kernel module (II) fglrx(0): Kernel Module version matches driver. (II) fglrx(0): Kernel Module Build Time Information: (II) fglrx(0): Build-Kernel UTS_RELEASE: 2.6.32-22-generic-pae (II) fglrx(0): Build-Kernel MODVERSIONS: yes (II) fglrx(0): Build-Kernel __SMP__: yes (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000 (II) fglrx(0): [uki] register handle = 0x00004000 (II) fglrx(0): DRI initialization successfull! (II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x01068000 (II) fglrx(0): FBMM initialized for area (0,0)-(1920,2240) (II) fglrx(0): FBMM auto alloc for area (0,0)-(1920,1920) (front color buffer - assumption) (II) fglrx(0): Largest offscreen area available: 1920 x 320 (==) fglrx(0): Backing store disabled (II) Loading extension FGLRXEXTENSION (==) fglrx(0): DPMS enabled (II) fglrx(0): Initialized in-driver Xinerama extension (**) fglrx(0): Textured Video is enabled. (II) LoadModule: "glesx" (II) Loading /usr/lib/xorg/extra-modules/modules/glesx.so (II) Module glesx: vendor="X.Org Foundation" compiled for 1.7.1, module version = 1.0.0 (II) Loading extension GLESX (II) Loading sub module "xaa" (II) LoadModule: "xaa" (II) Loading /usr/lib/xorg/modules/libxaa.so (II) Module xaa: vendor="X.Org Foundation" compiled for 1.7.6, module version = 1.2.1 ABI class: X.Org Video Driver, version 6.0 (II) fglrx(0): GLESX enableFlags = 94 (II) fglrx(0): Using XFree86 Acceleration Architecture (XAA) Screen to screen bit blits Solid filled rectangles Solid Horizontal and Vertical Lines Driver provided ScreenToScreenBitBlt replacement Driver provided FillSolidRects replacement (II) fglrx(0): GLESX is enabled (II) LoadModule: "amdxmm" (II) Loading /usr/lib/xorg/extra-modules/modules/amdxmm.so (II) Module amdxmm: vendor="X.Org Foundation" compiled for 1.7.1, module version = 1.0.0 (II) Loading extension AMDXVOPL (II) fglrx(0): UVD2 feature is available (II) fglrx(0): Enable composite support successfully (II) fglrx(0): X context handle = 0x1 (II) fglrx(0): [DRI] installation complete (==) fglrx(0): Silken mouse enabled (==) fglrx(0): Using HW cursor of display infrastructure! (II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2. (--) RandR disabled (II) Found 2 VGA devices: arbiter wrapping enabled (II) Initializing built-in extension Generic Event Extension (II) Initializing built-in extension SHAPE (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension BIG-REQUESTS (II) Initializing built-in extension SYNC (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension XC-MISC (II) Initializing built-in extension SECURITY (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFIXES (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (II) Initializing built-in extension COMPOSITE (II) Initializing built-in extension DAMAGE ukiDynamicMajor: found major device number 251 ukiDynamicMajor: found major device number 251 ukiOpenByBusid: Searching for BusID PCI:1:0:0 ukiOpenDevice: node name is /dev/ati/card0 ukiOpenDevice: open result is 18, (OK) ukiOpenByBusid: ukiOpenMinor returns 18 ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0 ukiOpenDevice: node name is /dev/ati/card1 ukiOpenDevice: open result is 18, (OK) ukiOpenByBusid: ukiOpenMinor returns 18 ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0 (II) AIGLX: Loaded and initialized /usr/lib/dri/fglrx_dri.so (II) GLX: Initialized DRI GL provider for screen 0 (II) fglrx(0): Enable the clock gating! (II) fglrx(0): Setting screen physical size to 507 x 285 (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm (II) config/udev: Adding input device Power Button (/dev/input/event1) (**) Power Button: Applying InputClass "evdev keyboard catchall" (II) LoadModule: "evdev" (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so (II) Module evdev: vendor="X.Org Foundation" compiled for 1.7.6, module version = 2.3.2 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 7.0 (**) Power Button: always reports core events (**) Power Button: Device: "/dev/input/event1" (II) Power Button: Found keys (II) Power Button: Configuring as keyboard (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "pc105" (**) Option "xkb_layout" "us" (II) config/udev: Adding input device Power Button (/dev/input/event0) (**) Power Button: Applying InputClass "evdev keyboard catchall" (**) Power Button: always reports core events (**) Power Button: Device: "/dev/input/event0" (II) Power Button: Found keys (II) Power Button: Configuring as keyboard (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "pc105" (**) Option "xkb_layout" "us" (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/event3) (**) Logitech USB-PS/2 Optical Mouse: Applying InputClass "evdev pointer catchall" (**) Logitech USB-PS/2 Optical Mouse: always reports core events (**) Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event3" (II) Logitech USB-PS/2 Optical Mouse: Found 12 mouse buttons (II) Logitech USB-PS/2 Optical Mouse: Found scroll wheel(s) (II) Logitech USB-PS/2 Optical Mouse: Found relative axes (II) Logitech USB-PS/2 Optical Mouse: Found x and y relative axes (II) Logitech USB-PS/2 Optical Mouse: Configuring as mouse (**) Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5 (**) Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE) (II) Logitech USB-PS/2 Optical Mouse: initialized for relative axes. (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/mouse1) (II) No input driver/identifier specified (ignoring) (II) config/udev: Adding input device Logitech USB Multimedia Keyboard (/dev/input/event4) (**) Logitech USB Multimedia Keyboard: Applying InputClass "evdev keyboard catchall" (**) Logitech USB Multimedia Keyboard: always reports core events (**) Logitech USB Multimedia Keyboard: Device: "/dev/input/event4" (II) Logitech USB Multimedia Keyboard: Found keys (II) Logitech USB Multimedia Keyboard: Configuring as keyboard (II) XINPUT: Adding extended input device "Logitech USB Multimedia Keyboard" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "pc105" (**) Option "xkb_layout" "us" (II) config/udev: Adding input device Logitech USB Multimedia Keyboard (/dev/input/event5) (**) Logitech USB Multimedia Keyboard: Applying InputClass "evdev keyboard catchall" (**) Logitech USB Multimedia Keyboard: always reports core events (**) Logitech USB Multimedia Keyboard: Device: "/dev/input/event5" (II) Logitech USB Multimedia Keyboard: Found keys (II) Logitech USB Multimedia Keyboard: Configuring as keyboard (II) XINPUT: Adding extended input device "Logitech USB Multimedia Keyboard" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "pc105" (**) Option "xkb_layout" "us" (II) config/udev: Adding input device KEYBOARD (/dev/input/event6) (**) KEYBOARD: Applying InputClass "evdev keyboard catchall" (**) KEYBOARD: always reports core events (**) KEYBOARD: Device: "/dev/input/event6" (II) KEYBOARD: Found keys (II) KEYBOARD: Configuring as keyboard (II) XINPUT: Adding extended input device "KEYBOARD" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "pc105" (**) Option "xkb_layout" "us" (II) config/udev: Adding input device KEYBOARD (/dev/input/event7) (**) KEYBOARD: Applying InputClass "evdev keyboard catchall" (**) KEYBOARD: always reports core events (**) KEYBOARD: Device: "/dev/input/event7" (II) KEYBOARD: Found 14 mouse buttons (II) KEYBOARD: Found scroll wheel(s) (II) KEYBOARD: Found relative axes (II) KEYBOARD: Found keys (II) KEYBOARD: Configuring as mouse (II) KEYBOARD: Configuring as keyboard (**) KEYBOARD: YAxisMapping: buttons 4 and 5 (**) KEYBOARD: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device "KEYBOARD" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "pc105" (**) Option "xkb_layout" "us" (EE) KEYBOARD: failed to initialize for relative axes. (II) config/udev: Adding input device KEYBOARD (/dev/input/mouse2) (II) No input driver/identifier specified (ignoring) (II) config/udev: Adding input device Macintosh mouse button emulation (/dev/input/event2) (**) Macintosh mouse button emulation: Applying InputClass "evdev pointer catchall" (**) Macintosh mouse button emulation: always reports core events (**) Macintosh mouse button emulation: Device: "/dev/input/event2" (II) Macintosh mouse button emulation: Found 3 mouse buttons (II) Macintosh mouse button emulation: Found relative axes (II) Macintosh mouse button emulation: Found x and y relative axes (II) Macintosh mouse button emulation: Configuring as mouse (**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5 (**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE) (II) Macintosh mouse button emulation: initialized for relative axes. (II) config/udev: Adding input device Macintosh mouse button emulation (/dev/input/mouse0) (II) No input driver/identifier specified (ignoring) (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments

  Read the article

• Hylafax / Capi4hylafax: faxgetty does not recognize number of lines

  - by Wrikken

  We've got a T.30 card, 30 working lines on it, but for some reason, if I add more then 30 faxes in the queue at any time (and we're busy enough at peak times that this happens a lot), faxgetty sends faxes to non-existent lines and they appear in the error queue as a 'busy' signal on the line, which results in a lot of failed faxes because the counter of max 3 tries increases rapidly. This is using faxgetty (USE_FAXGETTY="y" in /etc/default/hylafax). I've inherited this thing, so I'm not entirely sure how faxgetty is supposed to know the number of lines. However, if I alter the script to faxmodem (USE_FAXGETTY="n" in /etc/default/hylafax and manually enabling 30 modems), this behavior goes away (new faxes 'wait' for a line to be available before trying to send, so each try / fail is a valid one on a working line, majorly descreasing the amount of failed faxes. However, when researching this almost anyone talks about faxgetty being the preferred, more robust, method, and on top of that for some unexplained reason all FIFO's disappeared for some reason after several errorless hours with faxmodem, forcing a hylafax restart using faxgetty until we figured out why this faxmodem solution failed (which is another question, and somewhat out of scope here). Environment: Debian 2.6.26-2-amd64 capi4hylafax 1:01.03.00.99.svn.300-12 hylafax-client 2:4.4.4-10.1 hylafax-server 2:4.4.4-10.1 Config --hfaxd.conf-- LogFacility: daemon ServerTracing: 0x1ff --hyla.conf-- Host: localhost Verbose: No VRes: 196 TimeZone: local DialRules: "/etc/hylafax/dialrules.europe" --/etc/hylafax/config -- InternationalPrefix: 00 LongDistancePrefix: 0 AreaCode: 99999 CountryCode: 31 DialStringRules: "etc/dialrules.europe" ModemGroup: any:faxCAPI SendFaxCmd: "/usr/bin/wrapc2faxsend" --/etc/hylafax/config.faxCAPI -- SpoolDir: /var/spool/hylafax FaxRcvdCmd: /var/spool/hylafax/bin/faxrcvd PollRcvdCmd: /var/spool/hylafax/bin/pollrcvd FaxReceiveUser: uucp FaxReceiveGroup: dialout LogFile: /var/spool/hylafax/log/capi4hylafax #no, checking this log did not yield anything interesting LogTraceLevel: 4 LogFileMode: 0600 ModemGroup: any:faxCAPI #repeats of faxCAPI2 = faxCAPI30, with of course another devicename/local ident: { HylafaxDeviceName: faxCAPI RecvFileMode: 0600 FAXNumber: ****redacted**** LocalIdentifier: ****some-ident-per-device*** MaxConcurrentRecvs: 0 OutgoingController: 1 OutgoingMSN: SuppressMSN: 0 NumberPrefix: NumberPlusReplacer: "00" UseISDNFaxService: 0 RingingDuration: 0 { Controller: 1 AcceptSpeech: 0 UseDDI: 0 DDIOffset: DDILength: 0 IncomingDDIs: IncomingMSNs: AcceptGlobalCall: 1 } } So in short: How does faxgetty determine the number of lines available? (the man page isn't terribly revealing, and I can't find an appropriate setting in hylafax-config. And how can I get a capi4hylafax/hylafax setup which queues more faxes then lines are available correctly without immediately incrementing the fail count? We will not be receiving any faxes on this machine b.t.w. As I said, I've inherited this thing, so if there are important configuration options I'm not including, please let me know.

  Read the article

• Email delivery management grievances

  - by joxl

  The question I have may be more of principle than anything else, but here's my dilemma. I manage an email system for a small company (about 20 email users). We own a plain-letter .com domain name through Network Solutions. Our email service is hosted by Google Apps. Recently (Feb. 2011) we've been having customers report that they aren't getting our emails. Upon further investigation it seems that the failed emails are all to a common (well known) domain. We have not received any bounce messages for the emails. We've also contacted a few of the intended recipients, who have reported that the messages are not in their spam box; they simply did not receive anything. In these cases we re-sent the same email to an alternate address on another domain, which was successful received. One customer contacted their email provider about the issue. The provider recommended that we submit a form to be white-listed by their domain. Here's where my problem begins. I feel like this is heading down a slippery slope. Doesn't this undermine the very principle of email? If this is the appropriate action to take in these situations where will it end? In theory (following this model) it could be argued that eventually one will first need to "whitelist" (or more appropriately termed "authenticate") themselves with an email host before actually sending any messages. More to this point, what keeps the "bad" spammers from doing the same thing...? We've just gone full circle. I know avoiding anti-spam measures is a big cat-and-mouse game, but I think this is the wrong way of "patching" the problem. Email standards say that messages should not just disappear silently. I have a problem supporting a model that says "you must do < this to make sure your emails aren't ignored". I have a notion to call the provider and voice my complaint, although I have a feeling it will probably fall on deaf ears. Am I missing something here? Is this an acceptable approach to email spam problems? What should I do?

  Read the article

• Active Directory Partition Error

  - by BLAKE

  Right now my active directory is failing a dcdiag test. I can find no info online about this error. When I run dcdiag /test:crossrefvalidation, I get the output: .... Doing primary tests Testing server: Default-First-Site-Name\ad01 Running partition tests on : ForestDnsZones Starting test: CrossRefValidation ......................... ForestDnsZones passed test CrossRefValidation Running partition tests on : DomainDnsZones Starting test: CrossRefValidation ......................... DomainDnsZones passed test CrossRefValidation Running partition tests on : Schema Starting test: CrossRefValidation ......................... Schema passed test CrossRefValidation Running partition tests on : Configuration Starting test: CrossRefValidation ......................... Configuration passed test CrossRefValidation Running partition tests on : mydomain Starting test: CrossRefValidation ......................... mydomain passed test CrossRefValidation Running partition tests on : t Starting test: CrossRefValidation This cross-ref has a non-standard dNSRoot attribute. Cross-ref DN: CN=a3a24d3a-4782-460b-9148-86ac2d86b9ae,CN=Partitions,CN=Configuration, DC=mydomain,DC=com nCName attribute (Partition name): DC=t Bad dNSRoot attribute: dc01.mydomain.com Check with your network administrator to make sure this dNSRoot attribute is correct, and if not please change the attribute to the value below. dNSRoot should be: t It appears this partition (DC=t) failed to get completely created. This cross-ref (CN=a3a24d3a-4782-460b-9148-86ac2d86b9ae,CN=Partitions,CN=Configurat ion,DC=mydomain,DC=com) is dead and should be removed from the Active Directory. ......................... t failed test CrossRefValidation .... I used LDP from the windows support tools. I searched for the dnsRoot attribute in "cn=partitions,cn=configuration,dc=mydomain,dc=com", with the filter "(&(objectcategory=crossref)(systemFlags:1.2.840.113556.1.4.803:=5))" I got the result: ***Searching... ldap_search_s(ld, "cn=partitions,CN=Configuration,DC=mydomain,DC=com", 1, "(& (objectcategory=crossref)(systemFlags:1.2.840.113556.1.4.803:=5))", attrList, 0, &msg) Result <0>: (null) Matched DNs: Getting 3 entries: >> Dn: CN=65502be3-fc90-442a-83d8-4b3b91e82439,CN=Partitions,CN=Configuration,DC=mydomain,DC=com 1> dnsRoot: ForestDnsZones.mydomain.com; >> Dn: CN=a3a24d3a-4782-460b-9148-86ac2d86b9ae,CN=Partitions,CN=Configuration,DC=mydomain,DC=com 1> dnsRoot: ad01.mydomain.com; >> Dn: CN=f0ef5771-6225-4984-acd9-c08f582eb4e2,CN=Partitions,CN=Configuration,DC=mydomain,DC=com 1> dnsRoot: DomainDnsZones.mydomain.com; It looks like the bad partition has the name of my first domain controller 'ad01.mydomain.com'. I have googled for a while and have not been able to find any help or documentation about application partitions in Active Directory. Does anyone have any advice on how to cleanup this partition (or what the partition is for)? Does anyone know the repercussions for deleting this partition?

  Read the article

• How do I troubleshoot root cause of a hung windows (2003) server?

  - by GregW

  I have a pair of Windows (2003 Server) servers both running MS SQL Server (2008 EE) that each hang every few months. This has been occurring intermittently :( for the past 15 months pretty much since we started using the servers. The symptoms are as-follows: I cannot remote desktop in to troubleshoot; when I attempt to, I get stuck on a blank black screen and am never offered a login prompt I can still ping the servers I can still open a SQL connection to the server, and, CURIOUSLY/BIZARRELY, when I do a "select getdate()", the time it returns appears to be stuck on the exact fraction of a second when (I presume) the server hung. Repeated attempts to do "select getdate()" keep getting that same date, suggesting that the clock is frozen. Filesharing attempts to connect to the hung server fail with the error message: "\ServerName is not accessible. You might not have permissions to use this network resource. Contact the administrator of this server to find out if you have access permissions. The server's clock is not synchronized with the primary domain controller's clock." This is consistent with a frozen clock. Post-reboot, if I investigate the Windows Event Viewer logs, I can see many security accesses (coming from me and others) that I recognize were login attempts during the "down" period, but all of them in the security log are associated with that same timestamp of when the server hung. This also suggests the clock is frozen. There is not a clear cause in the Application or System event logs. I have a local Admin account on the server and am in the process of getting a domain-credentialed Admin account for better remote admin access. HP is supposed to be supporting these machines and has some low-level ILO2 access but they seem incapable of finding the root cause. A reboot will "fix" the problem but I would like to get to the root cause and solve the issue. Has anyone ever seen something like this odd clock behavior?! (If it were just one server I'd perhaps say a bad hardware clock, but two?) Can anyone advise me on what I should try to troubleshoot this sort of situation to find the root cause (or what I should tell HP to try?)

  Read the article

• IE and Google Chrome timeout on an IIS6 hosted SSL page that Firefox handles well.

  - by Thomas

  Ok, here's the scenario: Up until a few weeks ago, none of us noticed anything wrong with the corporate website. People were using it without complaint. Then, a client complained that a specific page on the site was timing out for him, and only when he committed a POST action on a form filled with data. I checked it out, and it timed out for me, too. But, it only timed out in Google Chrome and IE, not in Firefox. Additionally, the same page, on the same server, but served from a different domain name (one not under the protection of SSL, either) does not time out under any browser. To clarify: https://www.mysite.com/changes.php times out on POST, but the same with http works fine. That distinction (SSL vs. Non-SSL) seems to be important, as nothing else has changed. Our certificate is valid, and Firefox detects no errors thrown by the page. I've looked at the Request and Response headers from the page, and they all follow the correct formats. Then, after wandering through the site, I noticed a few other things. Both IE and Chrome will frequently time out on any page that is PHP-based. They never time out on static images or html files. I've looked at the site from a variety of different servers, my home and work workstations, and my netbook. Because of that, I've discounted a viral infection, as I highly doubt a virus is going to hit every one of the machines to which I have access in exactly the same manner. My setup is: Server: Win2k3, II6, PHP 5.2.9-1. Clients: IE7, IE8, Chrome (regular and dev channel): Frequent timeouts on PHP pages. Firefox 2, Firefox 3: No timeouts. Firebug shows no errors or even lengthy periods serving the pages. I've spent 2 days searching for any tech knowledge that I can find, and my search parameters are all too general. Everyone has problems loading SSL pages in IE and Chrome for a wide variety of reasons. The infrequent nature of the timeouts and the fact that there are no errors being reported anywhere is starting to drive me insane. Does anyone have any insight on a problem like this?

  Read the article

• Small Business Server services will not start, and remote desktop and UAC are broken

  - by Stephen Jennings

  Yesterday I began setting up a server with Windows Small Business Server 2008. All I am configuring it for right now is to be a domain controller and Exchange server. I completed the initial setup of SBS then started looking through different connection options (allowing VPN versus using a TS Gateway). After I rebooted one time, I started having three not-obviously-related issues: First, I could no longer remote desktop into the computer. I ran TCPView and saw that it was no longer listening on port 3389. I checked everything in Terminal Service Configuration but everything shows the computer ought to be allowing connections. Also, when I tried to use anything that required user account control elevation, the UAC dialog never popped up and the program that was waiting just froze. If I try to run "regedit" from the Run box, for example, it never appears. When I run in safe mode which does not run with UAC, I was able to access everything. I didn't want to deal with it, so I turned off UAC and rebooted. Finally, in the Windows SBS Console, there are status indicators for Security, Updates, Backup, and Other Alerts. The first three get stuck saying "Querying". Looking in the computer alerts, I have events showing the following services stopped: Background Intelligent Transfer Service KtmRm for Distributed Transaction Coordinator Distributed Transaction Coordinator Microsoft Exchange Information Store Microsoft Exchange System Attendant Microsoft Exchange Transport Windows Remote Management Update Services Windows Update I figured I must have configured something wrong accidentally and I couldn't find anything using Google explaining what might be the case, so I just decided to format the hard drive and reinstall SBS from scratch. I did this and everything was working last night, but I just turned the machine back on and it is doing the same thing again! On my second install, I did not configure anything except the following (all from SBS Console): Connect to the Internet (set IP and router address) Turn off customer feedback. Set up internet address. Decline to use a Smart Host for email. Added one standard user account. Since this happened again and I was very careful the second time not to configure anything outside of the SBS Console, I feel like there's something else going on. Right now the machine is on an isolated network that does have internet access. My desktop is the only other machine plugged into this network. Any and all help is appreciated (before I tear my hair out!)

  Read the article

• Losing internet connectivity on server after installing LogMeIn Hamachi (with server set as gateway node)

  - by Kim Jong-Un

  Our domain controller (SBS 2003) completely lost internet and network connectivity yesterday after I remotely installed LogMeIn Hamachi on it and set it to be a gateway node- in an attempt to create a VPN link between the server and a remote site. I had to go in to the office to resolve the problem as, unsurprisingly, my own remote access to the server was also lost. I was only able to restore network connectivity by deleting a virtual network adapter Hamachi created when making the server the gateway node (called "Hamachi bridge" I believe), then rebooting the server. This is a repeatable problem. Every time I try to get this to work, it just takes the server offline. Why would this bridge affect regular TCP/IP connectivity on the NIC in this way? I have tried a "hub-and-spoke" configuration between the server and our PC at a remote site (server set as hub, remote site as spoke). This caused no such problems with general internet connectivity, and file transfer worked well between the two computers. However, there was a DNS issue with the VPN between the two sites- resulting in Active Directory not being able to communicate between them (could not log on using domain user accounts at remote site if they were not already cached on that machine). I only tried a "gateway" network as LogMeIn support told me: If you can get the Active Directory to work it would only be through a "Gateway" network type with the server acting as the Gateway Node. You would configure the gateway settings on the server in the Hamachi client on that machine to push whatever IP's/DNS settings you prefer and at that point AD would be able (all things being equal) communicate to the client node when it attaches. We do not have any ActiveDirectory configuration info as that's outside the scope of our support. I hope this helps. It would be fantastic if I could get Active Directory to work over a Hamachi VPN connection, without worrying about the server going offline in this way. Does anyone have any ideas how I should proceed, or any theories as to what is going on when I try to use the "gateway" network type? I want to try to narrow down what is going on here.

  Read the article

• Moving from single-site to multi-site Active Directory has broken OWA proxying

  - by messick

  Originally we had the following setup: OfficeExch01 has Mailbox Role and CAS Role OfficeExch01 is in the office. CoLoExch01 had just CAS Role. CoLoExch01 is internet facing and in a CoLo. Three AD domain controllers in the default site. Users could go to https://webmail.whatever.com/owa, get proxyed to OfficeExch01 and everything was great. Well, we recently setup a separate AD site and put a domain controller and the ColoExch01 server in the new site. I also made that remote DC be a Global Catalog. Now, users get the following error: Outlook Web Access is not available. If the problem continues, contact technical support for your organization and tell them the following: There is no Microsoft Exchange Client Access server that has the necessary configuration in the Active Directory site where the mailbox is stored. I also see event 41 errors in the logs: The Client Access server "https://webmail.xxxxxxx.com/owa" attempted to proxy Outlook Web Access traffic for mailbox "/o=XXXXX/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Recipients/cn=xxxxxxk". This failed because no Client Access server with an Outlook Web Access virtual directory configured for Kerberos authentication could be found in the Active Directory site of the mailbox. The simplest way to configure an Outlook Web Access virtual directory for Kerberos authentication is to set it to use Integrated Windows authentication by using the Set-OwaVirtualDirectory cmdlet in the Exchange Management Shell, or by using the Exchange Management Console. If you already have a Client Access server deployed in the target Active Directory site with an Outlook Web Access virtual directory configured for Kerberos authentication, the proxying Client Access server may not be finding that target Client Access server because it does not have an internalUrl parameter configured. You can configure the internalUrl parameter for the Outlook Web Access virtual directory on the Client Access server in the target Active Directory site by using the Set-OwaVirtualDirectory cmdlet. Looking this up I see a lot talk about ExternalURL and InternalURL settings. However, everything worked great until we made the new AD site. I also made sure the internal CAS server's /owa virtual directory is set to use Integrated Authentication. Is there something I need to do to allow Exchange to see that I've made these AD changes?

  Read the article

• Complete Active Directory redesign and GPO application

  - by Wolfgang Kuehne

  after much testing and hundreds of tries and hours invested I decided to consult you experts here. Overview: I want to apply some GPO to our users which will add some specific site to the Trusted Sites in Internet Explorer settings for all users. However, the more I try the more confusing the results become. The GPO is either applied to one group of users, or to another one. Finally, I came to the conclusion that this weird behavior is cause rather by the poor organization in Users and Groups in Active Directory. As such I want to kick the problem from the root: Redesign the Active Directory Users and Groups. Scenario: There is one Domain Controller, and we use Terminal Services (so there is a Terminal Server as well). Users usually log on to the Terminal Server using Remote Desktop to perform their daily tasks. I would classify the users in the following way: IT: Admins, Software Development Business: Administration, Management The current structure of the Active Directory Users and Groups is a result of the previous IT management. The company has used Small Business Server which has created multiple default user groups and containers. Unfortunately, the guys working before me have do no documentation at all. Now, as I inherit this structure I am in the no mans land. No idea which direction to head first. As you can see, the Active Directory User and Groups have become a bit confusing. There is no SBS anymore, but when migrating from SBS to the current Windows Server 2008 R2 environment the guys before me have simply copied the same structure. The real question: Where should I start cleaning from, ensuring that I won't break totally the current infrastructure? What is a nice organization for the scenario that I have explained above? Possible useful info for the current structure: Computers folder contains Terminal Services Computers user group Members: TerminalServer computer located at Server -> Terminalserver OU Member of: NONE Foreign Security Principals : EMPTY Managed Service Accounts : EMPTY Microsoft Exchange Security Groups : not sure if needed, our emails are administered by external service provider Distribution Groups : not sure if needed Security Groups : there are couple of groups which are needed SBS users : contains all the users Terminalserver : contains only the TerminalServer machine

  Read the article

• Why is my Linux box dropping network connection? [closed]

  - by Robo

  I have a Debian server in the form of a Raspberry Pi running Raspian. It has a USB Wi-Fi connection. Sometimes it would not respond when I SSH to it, and would require a reboot. I found something in syslog that may indicate what the problem is, can someone help with what this means? Dec 16 15:34:17 raspberrypi wpa_supplicant[1501]: wlan0: WPA: Group rekeying completed with 00:21:29:6c:5c:3d [GTK=CCMP] Dec 16 16:17:01 raspberrypi /USR/SBIN/CRON[2109]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly) Dec 16 16:34:17 raspberrypi wpa_supplicant[1501]: wlan0: WPA: Group rekeying completed with 00:21:29:6c:5c:3d [GTK=CCMP] Dec 16 17:17:01 raspberrypi /USR/SBIN/CRON[2127]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly) Dec 16 17:34:17 raspberrypi wpa_supplicant[1501]: wlan0: WPA: Group rekeying completed with 00:21:29:6c:5c:3d [GTK=CCMP] Dec 16 18:17:01 raspberrypi /USR/SBIN/CRON[2142]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly) Dec 16 18:34:17 raspberrypi wpa_supplicant[1501]: wlan0: WPA: Group rekeying completed with 00:21:29:6c:5c:3d [GTK=CCMP] Dec 16 19:17:01 raspberrypi /USR/SBIN/CRON[2161]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly) Dec 16 19:31:29 raspberrypi kernel: [16615.391509] ieee80211 phy0: wlan0: No probe response from AP 00:21:29:6c:5c:3d after 500ms, disconnecting. Dec 16 19:31:29 raspberrypi wpa_supplicant[1501]: wlan0: CTRL-EVENT-DISCONNECTED bssid=00:21:29:6c:5c:3d reason=4 Dec 16 19:31:29 raspberrypi kernel: [16615.416189] cfg80211: Calling CRDA to update world regulatory domain Dec 16 19:31:30 raspberrypi ifplugd(wlan0)[1444]: Link beat lost. Dec 16 19:31:40 raspberrypi ifplugd(wlan0)[1444]: Executing '/etc/ifplugd/ifplugd.action wlan0 down'. Dec 16 19:31:40 raspberrypi wpa_supplicant[1501]: wlan0: CTRL-EVENT-TERMINATING - signal 15 received Dec 16 19:31:40 raspberrypi ifplugd(wlan0)[1444]: Program executed successfully. Dec 16 19:31:42 raspberrypi ntpd[1928]: Deleting interface #2 wlan0, 192.168.1.10#123, interface stats: received=321, sent=327, dropped=0, active_time=16596 secs Dec 16 19:31:42 raspberrypi ntpd[1928]: 202.6.116.123 interface 192.168.1.10 -> (none) Dec 16 19:31:42 raspberrypi ntpd[1928]: 203.99.128.34 interface 192.168.1.10 -> (none) Dec 16 19:31:42 raspberrypi ntpd[1928]: 203.118.148.40 interface 192.168.1.10 -> (none) Dec 16 19:31:42 raspberrypi ntpd[1928]: 202.89.49.65 interface 192.168.1.10 -> (none) Dec 16 19:31:42 raspberrypi ntpd[1928]: peers refreshed

  Read the article

• Looking for a new backup solution to replace dying tape drive

  - by E3 Group

  We're running Windows Server 2003 SBS and another machine with Server 2003 Standard on it. The SBS server is about 7 years old running pretty much 24/7 - a HP server of some description. We have an Ultrium 448 cycling LTO2 400GB tapes daily and incrementally backing up approximately 100gb worth of data (20gb C:\ and system state, 40gb exchange, 40gb database for some crap marketing software) on BackupExec 10D. As of 5 months ago, the backups have been consistently failing with IO errors, bad reads and some write errors. When I say consistent, I mean every time and we haven't had a proper backup for the entire 5 months - So if the server explodes tomorrow, 7 years worth of data will just cease to exist. I've only just recently rejoined the company and am looking at rectifying the more concerning problems, so the first thing I did was try a backup to an USB2.0 external drive. It was excruciatingly slow. In fact it was so slow it took 40 hours and it still wasn't finished. I ended up cancelling it and reconfiguring the selections again to reduce file size. This, however, isn't a permanent solution. I concluded that the IO error was either from a faulty tape drive (which has a tape stuck in there right now and not coming out) or from a dying SCSI controller. Neither of them are good news and both are extremely expensive to fix. I'm operating on an extremely low budget so have been looking at outsourcing the backups. A company in Sydney (where I'm located) offer incremental online backups via a NAS. It costs almost double a new tape drive but offers monthly repayments which will let us get through times when cash flow is minimal. It seems like a sweet deal but it is still a little bit pricey. So I'm looking for a cheaper, yet reliable solution. Maybe some in-house NAS or something offsite? The idea is to avoid using tapes. Are there any recommendations for rectifying my current situation? Or are tapes the only way to go? I'm concerned that the server will die one day in the near future and I must be able to restore it to another server with different hardware.

  Read the article

• Where to get laptop replacement parts?

  - by wai

  I am sure some of us have older laptops that still works but just one or two parts started not working very well. However, to send it back to the manufacturer for repair might not be worth the money (as some of them even charge consultation fees just to have it checked) as these old laptops are most probably well beyond warranty. Replacing these one or two parts could give your laptop a new lease of life. For example, I have a Dell Inspiron 640m which the fan recently failed. Everything else still works. I know enough to open up the laptop (after reading the service manual) and put it back together again, hence a replacement fan could save it. However, finding these parts turned out to be difficult. I guess I wouldn't be able to get it from Dell since I have been searching around the Dell forums and concluded if I were going to get Dell to at least talk to me, I would have to pay some money (since my warranty expired). I found this online:- http://www.parts-people.com/index.php?action=item&id=3725 However, as I don't live in the United States, shipping alone would cost me 3 times more than the part in question. In addition, if there's a problem, it would be difficult because I probably would have to mail the parts back (costing more money). One of my friend spilled water on her Macbook, she sent it back to Apple and they told her the cost of repairing it exceeds that of buying a new Macbook. They probably have to change everything except the LCD screen. I opened it up and found that most of the parts are still working, only the RAM had fried. Replaced it and it's working again. For some time before discovering only the RAM fried, I was toying with the idea of replacing the logic board myself but looks like I didn't have to. =) Now I know there's a site for Macbooks used replacement parts:- http://www.ifixit.com/ The question is, does anyone know where to get replacement parts at their own locality? It might benefit the community as a whole. Someone might know a local computer store that sells precisely just the things we needed (for now, I hope to find a shop that sells just the fan). If you own a laptop which you had an easy experience finding the replacement parts, do post that as well. PS: I wish laptop manufacturers have outlets where they sell these replacement parts (or at least let you place an order).

  Read the article

• Windows Setup could not configure Windows to run on this computer's hardware

  - by Hello71

  The whole installation goes smoothly up to the point of "Completing installation ...". The monitor changes resolution, after which a standard dialog box pops up saying Windows Setup could not configure Windows to run on this computer's hardware Then, in a few seconds, the whole machine powers down. Trying to restart produces the message: STOP: c000021a {Fatal System Error} 0x00000000 (0xc0000001 0x00100448) OR it boots into Setup and comes up with the message: Windows Setup encountered an unexpected error... (This is not the actual error, just paraphrasing) I tried using the OEM restore instead of a regular install, but it fails with the same error. (Even though it worked before...) General specs: HP Pavilion Elite e9262f Intel Core i5-750 Processor ATI Radeon HD 4650 Hitachi HDT721010SLA360 ATA Device 6GB DDR3 RAM SuperMulti DVD Burner with LightScribe Some built-in Wi-Fi module http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01916917 I've tried disconnecting the wireless card and disabling the built-in Ethernet and Firewire via the BIOS, and replacing the wireless keyboard and mouse with wired USB ones. Didn't work. I've also tried changing the SATA controller settings in the BIOS to RAID, AHCI, and IDE, reinstalling each time I changed. Still not working. I think the reason why it is showing the Fatal System Error is because it didn't finish installing before it errored out and shut down, so the system is left in an inconsistent state. I've tried 3 different copies (including the OEM restore) of Windows 7 now, and they're all failing at the same point, with the same error message. I've tried to install Windows 7 maybe 10 times already, with the exact same error message at the exact same location. Hm... Interestingly, the 32-bit version of Windows 7 works, but the 64-bit version doesn't. Perhaps it was a badly burned disk? Reburning the 64-bit version still comes up with the same error. Here's a picture of the side of the case that clearly says it came with Windows 7 64-bit, along with the model number and CPU. sudo fdisk -l: Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0009896f Device Boot Start End Blocks Id System /dev/sda1 * 1 13 104391 7 HPFS/NTFS /dev/sda2 14 94119 755906445 7 HPFS/NTFS /dev/sda3 119922 121602 13492224 7 HPFS/NTFS /dev/sda4 94120 119922 207257740+ 5 Extended /dev/sda5 119527 119922 3170769 82 Linux swap / Solaris /dev/sda6 107174 119526 99225441 83 Linux /dev/sda7 94120 107173 104856192 7 HPFS/NTFS Partition table entries are not in disk order

  Read the article

• getUserPrincipal() in JCIFS / Lan-Manager authentitation level setting in Windows 2k8

  - by Chris

  I have to find out in which exact format JCIFS stores the user principal in the "getUserPrincipal()" property. Therefor i created a test Environment like this: Windows Server 2008 Domain Controller Domain named "MYDOMAIN" Many Testusers in Active Directory Tomcat Application Server with my Web Application (which simply reads the user Principal and displays its values). The user should be logged in to the web-application with SSO therefor i need the format that jcifs is using to store the user. (For example user@MYDOMAIN or MYDOMAIN\user...) I tested the Authentication with other SSO frameworks with Kerberos Method and it works as expected. I'm now trying to use SSO through the NTLMHttpFilter of JCIFS. When i try to login i get the following error message: jcifs.smb.SmbException: The parameter is incorrect. jcifs.smb.SmbTransport.checkStatus(SmbTransport.java:541) jcifs.smb.SmbTransport.send(SmbTransport.java:641) jcifs.smb.SmbSession.sessionSetup(SmbSession.java:322) jcifs.smb.SmbSession.send(SmbSession.java:224) jcifs.smb.SmbTree.treeConnect(SmbTree.java:176) jcifs.smb.SmbSession.logon(SmbSession.java:153) jcifs.smb.SmbSession.logon(SmbSession.java:146) jcifs.http.NtlmHttpFilter.negotiate(NtlmHttpFilter.java:189) jcifs.http.NtlmHttpFilter.doFilter(NtlmHttpFilter.java:121) Regarding to the documentation i'm using to configure this, this is a know issue with the Group policy. It is stated there, that i have to change the Group policy "Networkaccess: lan-manager authentication level" to respond to NTLMv1 request. I have done this, but it's still not working. So what i also have to configure is the same policy on the client computer. I have to change the policy, so that the client computer sends NTLMv1. But it is always sending NTLMv2 tokens. The problem now is that i'm somehow not able to change this setting. (I already was before) because the dropdown box to choose the authentication method is "greyed out". edit: just to make this clear, this dialog is on the client-side in the "local-security policies" As you can see from this screenshot, the chosen method is "Only send NTLMv2 responses" which is the wrong setting and i'm pretty sure that this is causing the error above. My question is now, why can't i change this setting? Why is it greyd out?

  Read the article

• Why do these ipfw delayed pipes have no effect?

  - by troutwine

  I'm on OSX 10.7.5 and am attempting to add some latency to the connection to my personal domain with ipfw, using this article as a guide. Normal latency: > ping -c5 troutwine.us PING troutwine.us (198.101.227.131): 56 data bytes 64 bytes from 198.101.227.131: icmp_seq=0 ttl=56 time=92.714 ms 64 bytes from 198.101.227.131: icmp_seq=1 ttl=56 time=91.436 ms 64 bytes from 198.101.227.131: icmp_seq=2 ttl=56 time=91.218 ms 64 bytes from 198.101.227.131: icmp_seq=3 ttl=56 time=91.451 ms 64 bytes from 198.101.227.131: icmp_seq=4 ttl=56 time=91.243 ms --- troutwine.us ping statistics --- 5 packets transmitted, 5 packets received, 0.0% packet loss round-trip min/avg/max/stddev = 91.218/91.612/92.714/0.559 ms Enabling ipfw: > sudo sysctl -w net.inet.ip.fw.enable=0 net.inet.ip.fw.enable: 1 -> 0 > sudo sysctl -w net.inet.ip.fw.enable=1 net.inet.ip.fw.enable: 0 -> 1 The configuration of the pipe: > sudo ipfw add pipe 1 ip from any to 198.101.227.131 00200 pipe 1 ip from any to any dst-ip 198.101.227.131 > sudo ipfw add pipe 2 ip from 198.101.227.131 to any 00500 pipe 2 ip from 198.101.227.131 to any > sudo ipfw pipe 1 config delay 250ms bw 1Mbit/s plr 0.1 > sudo ipfw pipe 2 config delay 250ms bw 1Mbit/s plr 0.1 The pipes are in place and configured: > sudo ipfw -a list 00100 166 14178 fwd 127.0.0.1,20559 tcp from any to me dst-port 80 in 00200 0 0 pipe 1 ip from any to 198.101.227.131 00300 0 0 pipe 2 ip from 198.101.227.131 to any 65535 37452525 32060610029 allow ip from any to any > sudo ipfw pipe list 00001: 1.000 Mbit/s 250 ms 50 sl.plr 0.100000 0 queues (1 buckets) droptail mask: 0x00 0x00000000/0x0000 -> 0x00000000/0x0000 00002: 1.000 Mbit/s 250 ms 50 sl.plr 0.100000 0 queues (1 buckets) droptail mask: 0x00 0x00000000/0x0000 -> 0x00000000/0x0000 Yet, this has had no effect: > ping -c5 troutwine.us PING troutwine.us (198.101.227.131): 56 data bytes 64 bytes from 198.101.227.131: icmp_seq=0 ttl=56 time=100.920 ms 64 bytes from 198.101.227.131: icmp_seq=1 ttl=56 time=91.648 ms 64 bytes from 198.101.227.131: icmp_seq=2 ttl=56 time=91.777 ms 64 bytes from 198.101.227.131: icmp_seq=3 ttl=56 time=91.466 ms 64 bytes from 198.101.227.131: icmp_seq=4 ttl=56 time=93.209 ms --- troutwine.us ping statistics --- 5 packets transmitted, 5 packets received, 0.0% packet loss round-trip min/avg/max/stddev = 91.466/93.804/100.920/3.612 ms What gives? I understand that ipfw is depreciated, but the manpage does not mention it being disabled. Also, I am not using Network Link Controller as I want to affect a single host.

  Read the article

• DVD ROM is not working

  - by Cyril N.

  (note: I don't know in which StackExchange site to put this question, I'll thank the moderator that will move it to a more appropriate place, if there is a S.E. available for my question). I have a DVD RW drive that is well listed in the bios, and if no CD is in, it is also present in the "My Computer" of my Fedora 16. But when I put a disc on it, the icon disapear from "My Computer", and I can not do anything with this ! (Like erasing a RW disc). I'd like to boot a Fedora 17 Live CD image. I burned it on an other computer but when I try to run it in bios, nothing is done and I'm redirected to Grub of my HD. The command cdrecord -scanbus shows this : wodim: Warning: controller returns wrong size for CD capabilities page. wodim: Cannot get CD capabilities data. 6,1,0 601) 'HD-DT%ST' 'DVD%RAM G@22NP20' '1&04' Removable CD-ROM And when I try to mount manually the disc, I got this error : mount: block device /dev/sr0 is write-protected, mounting read-only mount: /dev/sr0: can't read superblock Here's a paste of dmesg | grep sr0 : [ 5.161265] sr0: scsi-1 drive [ 5.161621] sr 6:0:1:0: Attached scsi CD-ROM sr0 [ 834.545978] sr0: Hmm, seems the drive doesn't support multisession CD's [ 841.731194] sr0: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00 20 00 [ 842.021640] sr 6:0:1:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 842.021652] sr 6:0:1:0: [sr0] Sense Key : Aborted Command [current] [ 842.021662] sr 6:0:1:0: [sr0] Add. Sense: No additional sense information [ 842.021672] sr 6:0:1:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 02 00 [ 842.021688] end_request: I/O error, dev sr0, sector 0 [ 842.021697] Buffer I/O error on device sr0, logical block 0 [ 842.023715] sr 6:0:1:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 843.048203] sr 6:0:1:0: [sr0] Sense Key : Aborted Command [current] [ 843.048211] sr 6:0:1:0: [sr0] Add. Sense: No additional sense information [ 843.048219] sr 6:0:1:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00 [ 843.048234] end_request: I/O error, dev sr0, sector 0 [ 843.048274] EXT4-fs (sr0): unable to read superblock [ 843.063155] sr0: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00 20 00 [ 843.075904] sr0: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00 20 00 [ 843.220512] sr 6:0:1:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 843.220522] sr 6:0:1:0: [sr0] Sense Key : Aborted Command [current] [ 843.220530] sr 6:0:1:0: [sr0] Add. Sense: No additional sense information [ 843.220538] sr 6:0:1:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00 [ 843.220553] end_request: I/O error, dev sr0, sector 0 [ 843.220609] FAT-fs (sr0): unable to read boot sector The lines from Sense Key .. (line 6) to DRIVER_SENSE (line 11) are repeating a lot. I then changed my DVD player with an other spare one I had, and the disc didn't boot neither. I then changed the IDE cable, but still no success. What can I do to make it work? Thanks for your help.

  Read the article

• Vagrant-aws not provisioning

  - by SuperCabbage

  I'm trying to spin up and provision an EC2 instance with Vagrant, it successfully creates the instance up and I can then use vagrant ssh to SSH into the it but Puppet doesn't seem to carry out any provisioning. Upon running vagrant up --provider=aws --provision I get the following output Bringing machine 'default' up with 'aws' provider... WARNING: Nokogiri was built against LibXML version 2.8.0, but has dynamically loaded 2.9.1 [default] Warning! The AWS provider doesn't support any of the Vagrant high-level network configurations (`config.vm.network`). They will be silently ignored. [default] Launching an instance with the following settings... [default] -- Type: m1.small [default] -- AMI: ami-a73264ce [default] -- Region: us-east-1 [default] -- Keypair: banderton [default] -- Block Device Mapping: [] [default] -- Terminate On Shutdown: false [default] Waiting for SSH to become available... [default] Machine is booted and ready for use! [default] Rsyncing folder: /Users/benanderton/development/projects/my-project/aws/ => /vagrant [default] Rsyncing folder: /Users/benanderton/development/projects/my-project/aws/manifests/ => /tmp/vagrant-puppet/manifests [default] Rsyncing folder: /Users/benanderton/development/projects/my-project/aws/modules/ => /tmp/vagrant-puppet/modules-0 [default] Running provisioner: puppet... An error occurred while executing multiple actions in parallel. Any errors that occurred are shown below. An error occurred while executing the action on the 'default' machine. Please handle this error then try again: No error message I can then SSH into the instance by using vagrant ssh but none of my provisioning has taken place, so I'm assuming that errors have occured but I'm not being given any useful information relating to them. My Vagrantfile is as following; Vagrant.configure("2") do |config| config.vm.box = "ubuntu_aws" config.vm.box_url = "https://github.com/mitchellh/vagrant-aws/raw/master/dummy.box" config.vm.provider :aws do |aws, override| aws.access_key_id = "REDACTED" aws.secret_access_key = "REDACTED" aws.keypair_name = "banderton" override.ssh.private_key_path = "~/.ssh/banderton.pem" override.ssh.username = "ubuntu" aws.ami = "ami-a73264ce" end config.vm.provision :puppet do |puppet| puppet.manifests_path = "manifests" puppet.module_path = "modules" puppet.options = ['--verbose'] end end My Puppet manifest is as following; package { [ 'build-essential', 'vim', 'curl', 'git-core', 'nano', 'freetds-bin' ]: ensure => 'installed', } None of the packages are installed.

  Read the article

• PC freezing when used to print labels

  - by Will

  Hi I have a windows XP machine that is used to print labels from a Zebra label printer. It is connected a member of the domain. I am getting reports that when people try to use the computer it will sometimes be frozen to the point where they have to physically shut the machine down and boot to get it responding. (this happens about once a day). I took a look in Event Viewer and nabbed some of these errors out of it: Event Type: Error Event Source: Userenv Event Category: None Event ID: 1054 Date: 11/12/2010 Time: 9:13:04 AM User: NT AUTHORITY\SYSTEM Computer: FS-LABELMACHINE Description: Windows cannot obtain the domain controller name for your computer network. (A socket operation was attempted to an unreachable host. ). Group Policy processing aborted. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Event Type: Error Event Source: AutoEnrollment Event Category: None Event ID: 15 Date: 11/11/2010 Time: 11:08:25 PM User: N/A Computer: FS-LABELMACHINE Description: Automatic certificate enrollment for local system failed to contact the active directory (0x80072751). A socket operation was attempted to an unreachable host. Enrollment will not be performed. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Hanging application MSACCESS.EXE, version 11.0.8166.0, hang module hungapp, version 0.0.0.0, hang address 0x00000000. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.... SearchIndexer (2420) Unable to write a shadowed header for file C:\Documents and Settings\All Users\Application Data\Microsoft\Search\Data\Applications\Windows\MSS.chk. Error -1032. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Failed auto update retrieval of third-party root list sequence number from: <http://www.download.windowsupdate.com/msdownload/update/v3/static/trustedr/en/authrootseq.txt> with error: A connection with the server could not be established For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. I'm not really sure what to make out of this... Thanks for the help in advanced, Will

  Read the article

• When running a shell script, how can you protect it from overwriting or truncating files?

  - by Joseph Garvin

  If while an application is running one of the shared libraries it uses is written to or truncated, then the application will crash. Moving the file or removing it wholesale with 'rm' will not cause a crash, because the OS (Solaris in this case but I assume this is true on Linux and other *nix as well) is smart enough to not delete the inode associated with the file while any process has it open. I have a shell script that performs installation of shared libraries. Sometimes, it may be used to reinstall versions of shared libraries that were already installed, without an uninstall first. Because applications may be using the already installed shared libraries, it's important the the script is smart enough to rm the files or move them out of the way (e.g. to a 'deleted' folder that cron could empty at a time when we know no applications will be running) before installing the new ones so that they're not overwritten or truncated. Unfortunately, recently an application crashed just after an install. Coincidence? It's difficult to tell. The real solution here is to switch over to a more robust installation method than an old gigantic shell script, but it'd be nice to have some extra protection until the switch is made. Is there any way to wrap a shell script to protect it from overwriting or truncating files (and ideally failing loudly), but still allowing them to be moved or rm'd? Standard UNIX file permissions won't do the trick because you can't distinguish moving/removing from overwriting/truncating. Aliases could work but I'm not sure what entirety of commands need to be aliased. I imagine something like truss/strace except before each action it checks against a filter whether to actually do it. I don't need a perfect solution that would work even against an intentionally malicious script. Ideas I have so far: Alias cp to GNU cp (not the default since I'm on Solaris) and use the --remove-destination option. Alias install to GNU install and use the --backup option. It might be smart enough to move the existing file to the backup file name rather than making a copy, thus preserving the inode. "set noclobber" in ~/.bashrc so that I/O redirection won't overwrite files

  Read the article

• Wiimote accelerometer input on Windows? (in 2013 - Glovepie alternative?)

  - by user568458

  There were a few options for getting accelerometer input into Windows using a Nintendo Wiimote. As of mid 2013, these projects seem to be dead, corrupted with malware, or both. Are there any tools out there that can do this that are still available (and not full of malware)? Quick roundup of the options that used to exist, or that still exist but aren't suitable: Glovepie, which used to be the most recommended option, appears to be dead: it's own website hacked, its creator's googlepages page full of strange stuff that sounds like hacker-humour about the end of the world... (I'd rather not link to them, very dubious stuff...), and lots of forum threads asking if it's a dead project with comments along the lines of "I heard that the author intends to return to it" dated 2011... Wiiuse seems to be dead: its sourceforge page simply says "Error.", its own website has turned into a squatter page. There apparently was an extension for Autohotkey that allowed Wiimote input, but I've seen warnings that this too is now full of malware (see final commentin above link) Everything else I can find about using Wiimotes as input on Windows - for example, Johnny Lee Cheng's work - seems to be exclusively about using infrared or sensor bar, or tied to a specific purpose (e.g. FPS gaming). My main interest is in the accelerometer, and buttons if possible (although something that supports the IR stuff too would be ideal). Is there anything that works for getting Wiimote accelerometer input into Windows that is reliable and not a malware-fest? If anyone's interested in "Why?", it's to use the Wiimote as an audio / midi controller: to use movement, pitch, roll etc to modulate lots of different sound variables at once with one hand. Wiimotes are great for this, and Glovepie used to be the standard way to make this work (e.g. see for example this tutorial, and this one, ignore the unrelated video; I've also seen musicians using wiimote/glovepie setups at gigs, creating some really unique sounds). As of 2013, however, Glovepie seems to be a dead and thoroughly hacked project, sadly. Is there anything else? With or without MotionPlus is fine (with would be better). If anyone knows of any worthy alternatives to Wiimotes in terms of price and quality that can be made to work with a PC, that would also be great: but in my research I coulnd't find any (here's a link to someone reaching the same conclusion). found some potentially relevant stuff here, not had time to test any of it yet though - http://stackoverflow.com/questions/2984450/using-accelerometer-in-wiimote-for-physics-practicals

  Read the article

• opening adobe reader results in infinite explorer.exe process creation loop

  - by irrational John

  First, apologies if the answer to this is only a Google away. I tried, honest I did. But I wasn't able to find anything about this problem posted elsewhere. I'm using Adobe Reader v9.3.2 in Windows 7 Home Premium 64-bit. If you want more system details, then just request them. What happens is that when I attempt to open a PDF by clicking "Open" on it then (1) adobe reader never opens and (2) the explorer.exe program is (apparently) recursively opened. I base this on opening the Task Manager and seeing a long list of explorer.exe processes under the "Processes" tab. Usually there is only one. When I recreate this problem, the list of explorer.exe processes are at least a page or two long. (Too many to bother counting). I "correct" this problem by logging off and then logging back on. This kills all the explorer.exe tasks. Unfortunately I don't know another way to terminate them all. Now here's the curious part. This only happens when I attempt to "Open" a PDF file. If instead I use the context menu (right mouse click on the PDF) and select "Open with" and "Adobe Reader 9.3" then Adobe Reader opens the file with no problem. It seems that there is something wrong with the setting for the default open action for PDF files. However, I have been unable to fix this by changing the Windows setting. Here is what I have tried. When I open Control Panel > All Control Panel Items > Default Programs > Set Associations I do not find an entry for file type .pdf. There are only entries for .pdfxml and .pdx. When use "Open with" on a PDF file and select "Choose default program", the check box for "Always use the selected program to open this kind of file" is disabled (greyed out). I have uninstalled and reinstalled Adobe Reader but the problem persists. While obviously no lives are at stake here, this problem is annoying the frickin' heck out of me. If I forget and recreate this bug then I have to stop everything I'm doing to stop it. Any suggestions on how I might go about fixing this?

  Read the article

< Previous Page | 652 653 654 655 656 657 658 659 660 661 662 663  | Next Page >