Search Results

Search found 21235 results on 850 pages for 'www'.

Page 659/850 | < Previous Page | 655 656 657 658 659 660 661 662 663 664 665 666  | Next Page >

• How do you import CA certificates onto an Android phone?

  - by f50driver

  Hi all, I want to connect to my University's wireless using my Nexus One. When I go to "Add Wi-Fi network" in Wireless Settings I fill in the Network SSID and select 802.1x Enterprise for the security and fill everything out. The problem is that our university's wireless uses Thawte Premium Server CA certificate for certification. When I click the drop down list for CA certificate I get nothing in the list (just N/A) Now I have the certificate (Thawte Premium Server CA.pem) and have moved it to my SD card, but it doesn't look like Android automatically detects it. Where should I put the certificate so that the Android wireless manager recognizes it. In other words, how can I import a CA certificate so that Android recognizes that it is on the phone and displays it in the CA Certificate drop down list. Thanks for any help, Tomek P.S. My phone is not rooted EDIT: After doing some research it looks like you are able to install certificates by going to your phone's settings Location & Security Install from SD card Unfortunately it looks like the only accepted file extension is .p12. It does not look like there is a way to import .cer or .pem files (which are the only two files that come with the Thawte certificates) at this moment. It does look like you can use a converter to convert your .cer or .pem files to .p12, however a key file is needed. https://www.sslshopper.com/ssl-converter.html I do not know where to get this key file for the Thawte certificates.

  Read the article

• How to set up the CNAME in DNS zone record to work with Unbounce

  - by Lirik

  I'm trying to run split testing on some landing pages I "designed" with Unbounce, but it requires that I set the CNAME record for my domain/sub-domain and I'm having trouble figuring out what is the right way to do it. My host is arvixe (www.arvixe.com) and their customer support has failed to help me for the past 5 days (I spoke to them multiple times). I followed the directions for setting the CNAME record and I was able to set the CNAME record, but I'm consistently unable to verify that the CNAME record is set up correctly. I followed the instructions on Unbounce to verify the CNAME record for my sub-domain (beta.devboost.com) and here are the results: No records found reverse lookup smtp diag port scan blacklist Reported by ns1.SNARE.arvixe.com on Thursday, November 10, 2011 at 5:49:57 PM (GMT-6) Here is my DNS zone record from the control panel of my host (last record, CNAME unbouncepages.com): Is there something wrong with my DNS Zone Record? What's the right way to do this? Update: I also have a CNAME record for beta in my root domain (devboost.com): I've updated my sub-domain record now: I've removed most of the other DNS records and I've removed the beta label for the CNAME record: Is that correct? Is there anything else I need to do?

  Read the article

• Problems with repositories on CentOS 3.9

  - by rodnower

  Hello, I have CentOS 3.9 for i386. When I try to instal some thing with yum, i.e: yum install firefox or yum install firefox* or yum list firefox and so on, I get: +++++++++++++++++++ yum info firefox Gathering header information file(s) from server(s) Server: CentOS-3 - Addons Server: CentOS-3 - Base Server: CentOS-3 - Extras Server: CentOS-3 - Updates Server: Jason's Utter Ramblings Repo Finding updated packages Downloading needed headers Looking in Available Packages: Looking in Installed Packages: +++++++++++++++++++ Some time ago I had CentOS 5, and I had the similar problem (exept of firefox all other packages were not installed) and I spent very much time to find different repositories and so on. Now I have CentOS 3, and there is nothing I can install with yum. This is yum.conf content: +++++++++++++++++++ [main] cachedir=/var/cache/yum debuglevel=2 logfile=/var/log/yum.log pkgpolicy=newest distroverpkg=redhat-release installonlypkgs=kernel kernel-smp kernel-hugemem kernel-enterprise kernel-debug kernel-unsupported kernel-smp-unsupported kernel-hugemem-unsupported tolerant=1 exactarch=1 [utterramblings] name=Jason's Utter Ramblings Repo baseurl=http://www.jasonlitka.com/media/EL4/i386/ [base] name=CentOS-$releasever - Base baseurl=http://mirror.centos.org/centos/$releasever/os/$basearch/ #released updates [update] name=CentOS-$releasever - Updates baseurl=http://mirror.centos.org/centos/$releasever/updates/$basearch/ #packages used/produced in the build but not released [addons] name=CentOS-$releasever - Addons baseurl=http://mirror.centos.org/centos/$releasever/addons/$basearch/ #additional packages that may be useful [extras] name=CentOS-$releasever - Extras baseurl=http://mirror.centos.org/centos/$releasever/extras/$basearch/ #[centosplus] #name=CentOS-$releasever - Plus #baseurl=http://mirror.centos.org/centos/$releasever/centosplus/$basearch/ #[testing] #name=CentOS-$releasever - Testing #baseurl=http://mirror.centos.org/centos/$releasever/testing/$basearch/ #[fasttrack] #name=CentOS-$releasever - Fasttrack #baseurl=http://mirror.centos.org/centos/$releasever/fasttrack/$basearch/ +++++++++++++++++++ The file is too long, so I littely edited it. So my question is: is there some "normal" one repository that have all basic thing like firefox and so that I will insert to this file and all will work fine? Thank you very much for ahead.

  Read the article

• Cisco PIX to Juniper Netscreen Policy-based VPN fails Phase 2 Proposal

  - by elint

  I've followed the instructions to configure a VPN between a netscreen device and a Cisco PIX as directed by Cisco's [netscreen to PIX VPN]http://www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a00801c4445.shtml article. The only differences are that I'm running PIX 6.3(5) and Juniper Netscreen 6.1.0r2.0 (Firewall+VPN). I followed both configurations exactly, and when I try to connect, the Juniper returns with: 2010-02-21 12:54:28 information IKE: Removed Phase 2 SAs after receiving a notification message. 2010-02-21 12:54:28 information IKE pix_public_IP: Received a notification message for DOI 1 14 NO-PROPOSAL-CHOSEN. 2010-02-21 12:54:28 information IKE pix_public_IP Phase 2: Initiated negotiations. On the Netscreen, I've created a Phase 2 Proposal called ToCorpOffice using DH Group#2, 3DES-CBC, and SHA-1, and when configuring the AutoKey IKE, I chose ToCorpOffice and removed all other transforms. I believe I've configured the same on the PIX with: sysopt connection permit-ipsec crypto ipsec transform-set mytrans esp-3des esp-sha-hmac crypto map mymap 10 ipsec-isakmp crypto map mymap 10 match address nonat crypto map mymap 10 set pfs group2 crypto map mymap 10 set peer netscreen_public_ip crypto map mymap 10 set transform-set mytrans crypto map mymap interface outside Saved that and rebooted, so here's the cryptomap info: PIX-FW1# show crypto map Crypto Map: "mymap" interfaces: { outside } Crypto Map "mymap" 10 ipsec-isakmp Peer = netscreen_public_ip access-list nonat; 1 elements access-list nonat line 1 permit ip 192.168.1.0 255.255.255.0 192.168.2.0 255.255.255.0 (hitcnt=0) Current peer: netscreen_public_ip Security association lifetime: 4608000 kilobytes/28800 seconds PFS (Y/N): Y DH group: group2 Transform sets={ mytrans, } PIX-FW1# Any idea why I'm getting a NO-PROPOSAL-CHOSEN error?

  Read the article

• How-To Configure Weblogic, Agile PLM and an F5 LTM

  - by Brian Dunbar

  Agile, Weblogic, and an F5 walk into a bar ... I've got this Agile PLM v 9.3 Running on WebLogic, two managed servers. An F5 BigIP LTM. We're upgrading from Agile v 9.2.1.4 running on OAS. The problem is that while the Windows client works fine the Java client does not. My setup is identical to one outlined in F5's doc: http://www.f5.com/pdf/deployment-guides/bea-bigip45-dg.pdf When I launch the java client it returns this error "Server is not valid or is unavailable." Oracle claims Agile PLM is setup correctly, but won't comment on the specifics of the load balancer. F5 reports the configuration is correct but can't comment on the specifics of the application. I am merely the guy in a vortex of finger-pointing who wants my application to work. It's that or give up on WLS and move back to OAS. Which has it's own problems but at least we know how it works. Any ideas?

  Read the article

• How to disable windows server 2008 timestamp response

  - by Cal

  Posted this question on stackoverflow but then got instructed to post it here: I was using Rapid7's Nexpose to scan one of our web servers (windows server 2008), and got a vulnerability for timestamp response. According to Rapid7, timestamp response shall be disabled: http://www.rapid7.com/db/vulnerabilities/generic-tcp-timestamp So far I have tried several things: Edit the registry, add a "Tcp1323Opts" key to HKLM\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters, and set it to 0. http://technet.microsoft.com/en-us/library/cc938205.aspx Use this command: netsh int tcp set global timestamps=disabled Tried powershell command: Set-netTCPsetting -SettingName InternetCustom -Timestamps disabled (got error: Set-netTCPsetting : The term 'Set-netTCPsetting' is not recognized as the name of a cmdlet, function, script file, or operable program. Check the spelling of the name, or if a path was included, verify that the path is correct and try again.) None of above attempts was successful, after re-scan we still got the same alert. Rapid7 suggested using a firewall that's capable of blocking it, but we want to know if there is a setting on windows to achieve it. Is it through a specific port? If yes, what is the port number? If not, could you suggest a 3rd party firewall that is capable of blocking it? Thank you very much.

  Read the article

• Django running on Apache+WSGI and apache SSL proxying

  - by Lessfoe

  Hi all, I'm trying to rewrite all requests for my Django server running on apache+WSGI ( inside my local network) and configured as the WSGI's wiki how to, except that I set a virtualhost for it. The server which from I want to rewrite requests is another apache server listening on port 80. I can manage it to work well if I don't try to enable SSL connection as the required way to connect. But I need all requests to Django server encrypted with SSL so I generally used this directive to achieve this ( on my public webserver ): Alias /dirname "/var/www/dirname" SSLVerifyClient none SSLOptions +FakeBasicAuth SSLRequireSSL AuthName "stuff name" AuthType Basic AuthUserFile /etc/httpd/djangoserver.passwd require valid-user # redirect all request to django.test:80 RewriteEngine On RewriteRule (.*)$ http://django.test/$1 [P] This configuration works if I try to load a specific page trough the external server from my browser. It is not working clicking my django application urls ( even tough the url seems correct when I put my mouse over). The url my public server is trying to serve use http ( instead of https ) and the directory "dirname" I specified on my apache configuration disappear, so it says that the page was not found. I think it depends on Django and its WSGI handler . Does anybody went trough my same problem? PS: I have already tried to modify the WSGI script . I'm Using Django 1.0.3, Apache 2.2 on a Fedora10 (inside), Apache 2.2 on the public server. Thanks in advance for your help. Fab

  Read the article

• BizTalk MQSC adapter configuration error & IBM WebSphere MQ Client V6.0

  - by chinna

  Hi Guys, I'm having trouble configuring the MSQC adapter for BizTalk Server 2006. At the moment I'm getting the following error when setting up a receive location or send port: The adapter "MQSC" raised an error message. Details "The specified module could not be found. (Exception from HRESULT: 0x8007007E) A dependency could not be found. Refer to product documentation for information on MQSC Adapter software prerequisites.".For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. I have installed the IBM WebSphere Client v6.0 installed but was unable to find the "IBM fix pack 6.0.1.1" for the WebSphere CLIENT as some people have suggested. I have found this post (http://www.biztalkgurus.com/forums/p/3719/7212.aspx) which seems to shed some light on this issue, but I am unable to find the fix-pack that they speak of or resolve the problem Is anybody able to provide any further information? A link to download the IBM WebSphere MQ Client V6.0 fix pack 6.0.1.1 would be a great start! Thanks, Jason

  Read the article

• Primary IDE Channel: Ultra DMA Mode 5 >> PIO Mode

  - by Wesley

  Hi, my netbook was having huge audio lag and just abnormally slow processing. After doing some searching on the internet, I found out that I needed to uninstall/reinstall the Primary IDE Channel found under the IDE controller section in the Device Manager. I would then set the Transfer Mode to DMA if available and everything would be great. For a period of time, I would see that "Ultra DMA Mode 5" was the current transfer mode, but every so often, it'd revert back to "PIO Mode", which is when it's really laggy. What can I do to prevent the Primary IDE Channel to revert from Ultra DMA Mode to PIO Mode? Also, my netbook has BSODed a few times when it is in PIO Mode, without any real explanation. I have a Samsung N120. Specs are as follows: http://www.samsung.com/ca/consumer/office/mobile-computing/netbook/NP-N120-KA01CA/index.idx?pagetype=prd_detail&tab=spec&fullspec=F. Only difference is that I have upgraded to 2.0 GB of DDR2 RAM. EDIT: For all who are looking for an answer to this problem, click the link in Kythos's answer and look at number 6 (Re-enable DMA using the Registry Editor). This always works for me now. If on reboot, you seem to only have a black screen after XP is loading, just wait... it is still loading and will show signs of life after 2-3 minutes.

  Read the article

• Creating a DNS Server

  - by c.adhityaa

  OK, I am a complete newbie to all this, so please bear with me. I want to create a DNS Server (like Google does - 8.8.8.8). I understand that a DNS Server is a Server that gives a IP on being given a hostname, ie. when I ask it what is the IP of google.com, it says "64.233.160.0". So, what I want to do is create a similar one that holds records of what translates to what. I thought of this since it looks to be similar to a webserver - ask for a page and it gives back the page. That is, when my machine has the IP xxx.xxx.xxx.xxx and people chose xxx.xxx.xxx.xxx as their Primary DNS Server, then when they ask "www.google.com", I sould be able to tell "64.233.160.0". So, how do I create this DNS Server that is accessible to everyone in the world ? It would be easier if we have something like EasyPHP which is the analogue to a webserver here. I am sorry if I have caused any trauma because this might seem rubbish to experts ;) Adhityaa

  Read the article

• API numbers don't match on compiled PHP extension

  - by tixrus

  I'm trying to get GD into my PHP. I recently installed PHP5.3.0 on my system running Mac Leopard using mac ports. It did not come with the gd module. So I downloaded gd, compiled it as an extension module as per http://www.kenior.ch/macintosh/adding-gd-library-for-mac-os-x-leopard, made php.ini point to it, restarted apache etc. But no GD. So in apache error log it says PHP Warning: PHP Startup: gd: Unable to initialize module\nModule compiled with module API=20060613\nPHP compiled with module API=20090115\nThese options need to match\n in Unknown on line 0 So a bit of googling says I should not use the phpize I have before configuring and making these. I should use a new one called phpize5. I surely don't have any such thing. Unless its packed up inside something else in my php5.3. distro. Where do you get it. In Ubuntu I could just run sudo apt-get install php-dev, (apparently) and it would just appear by magic. At least that's what the webpage said. Unfortunately I am running MacOSX version Leopard. How can I build this GD module on Leopard so that it will match the API number in my PHP?

  Read the article

• Router for creating site to site VPN to server provider using Cisco ASA 5540

  - by fondie

  We have dedicated servers hosted for us by a third party, we connect to these over a VPN. My server provider uses Cisco ASA 5540 as VPN devices. Currently we're using software clients on individual machines to connect to this VPN, either: Cisco VPN Client Shrew Soft VPN Connect However, I'm looking to purchase a new load balancing router for our office and thought this could be an opportunity to get VPN client duties taken over by hardware. We could then create a permanent VPN tunnel that could be used by anyone on the network with no software client necessary. Sadly I'm not the most knowledgeable on this kind of stuff so is: 1) This a realizable goal? Next I need to know what kind of hardware I will need. I'm not looking to spend lots of money on this (~$500), so doubtful I can afford any Cisco kit. Therefore, this is the most promising candidate I've seen (as far as my limited knowledge goes): Draytek Vigor 2955 - http://www.draytek.co.uk/products/vigor2955.html 2) Would this be compatible with the Cisco kit my server provider uses? 3) If not, are there any alternatives I should consider? Many thanks in advance.

  Read the article

• apache Client Certificate Authentication errors: Certificate Verification: Error (18): self signed certificate

  - by decoy

  So I have been following instructions on setting up Client Certificate Authentication in Apache2 w/ mod_ssl. This is solely for the purpose of testing an application against CAA, not for any sort of production use. So far I've followed http://www.impetus.us/~rjmooney/projects/misc/clientcertauth.html for advice on generating my CA, server, and client encryption information. I've put all three of them into /etc/ssl/ca/private. I've setup the following additional directives in my default_ssl site file: <IfModule mod_ssl.c> <VirtualHost _default_:443> ... SSLEngine on SSLCertificateFile /etc/ssl/ca/private/server.crt SSLCertificateKeyFile /etc/ssl/ca/private/server.key SSLVerifyClient require SSLVerifyDepth 2 SSLCACertificatePath /etc/ssl/ca/private SSLCACertificateFile /etc/ssl/ca/private/ca.crt <Location /> SSLRequireSSL SSLVerifyClient require SSLVerifyDepth 2 </Location> <FilesMatch "\.(cgi|shtml|phtml|php)$"> SSLOptions +StdEnvVars </FilesMatch> <Directory /usr/lib/cgi-bin> SSLOptions +StdEnvVars </Directory> ... </VirtualHost> </IfModule> I've install the p12 file into Chrome, but when I go to visit https://localhost, I get the following errors Chrome: Error 107 (net::ERR_SSL_PROTOCOL_ERROR): SSL protocol error. Apache: Certificate Verification: Error (18): self signed certificate If I had to guess, one of my directives is not setup right to load and verify the p12 w/ my self created CA. But I can't for the life of me figure out what it is. Would anyone have more experience here who could point me in the right direction?

  Read the article

• Unable to install ffmpeg-php

  - by matt74tm

  I followed the instructions on http://www.mysql-apache-php.com/ffmpeg-install.htm but ffmpeg-php does not show up in my phpinfo() The commands I ran (in order) #yum install ffmpeg ffmpeg-devel ... Public key for faac-1.26-1.el5.rf.x86_64.rpm is not installed #rpm -Uhv http://apt.sw.be/redhat/el5/en/i386/rpmforge/RPMS/rpmforge-release-0.3.6-1.el5.rf.i386.rpm ... 1:rpmforge-release ########################################### [100%] #yum install ffmpeg ... Complete! #wget http://space.dl.sourceforge.net/project/ffmpeg-php/ffmpeg-php/0.6.0/ffmpeg-php-0.6.0.tbz2 ... #tar -xjf ffmpeg-php-0.6.0.tbz2 #cd ffmpeg-php-0.6.0 #phpize ... configure: error: ffmpeg headers not found. Make sure ffmpeg is compiled as shared libraries using the --enable-shared option #yum install ffmpeg-devel ... Complete! #./configure ... config.status: creating config.h #make ... Build complete. Don't forget to run 'make test'. #make install Installing shared extensions: /usr/local/lib/php/extensions/no-debug-non-zts-20090626/ #ls -al /usr/local/lib/php/extensions/no-debug-non-zts-20090626/ ... -rwxr-xr-x 1 root root 185285 Sep 20 03:36 ffmpeg.so* ... #nano /usr/local/lib/php.ini In which I put these two lines at the end of the php.ini file [ffmpeg] extension=ffmpeg.so Then, #service httpd restart But phpinfo() still does not show any 'ffmpeg' section. This is the correct php.ini because: #php -i | grep php\.ini Configuration File (php.ini) Path => /usr/local/lib Loaded Configuration File => /usr/local/lib/php.ini

  Read the article

• Email with extra '.com' behind sender email address

  - by CHT

  Currently I had a situation where I sent an email to [email protected], but when I receive mail from [email protected], it showed as [email protected], with extra '.com' behind the email address, this just happen within this week. Before this, I didn't change any setting, currently I am using Outlook 2010. When I checked the email in webmail, it also showed it as [email protected]. It seem that it has nothing to do with Outlook. However, I also tried on Thunderbird 16.0.1, but still the problem is the same. Has anyone experienced this before? Is the problem caused by the sender or receiver? Header Message as below: Return-Path: [email protected] Received: from colo4.roaringpenguin.com (not-assigned.privatedns.com [174.142.115.36] (may be forged)) by pioneerpos.com (8.12.11/8.12.11) with ESMTP id q9V6OsKU032650 for [email protected]; Wed, 31 Oct 2012 01:24:55 -0500 Received: from mail.pointsoft.com.tw (pointsoft.com.tw [59.124.242.126]) by colo4.roaringpenguin.com (8.14.3/8.14.3/Debian-9.4) with ESMTP id q9V6OmN0026374 for [email protected]; Wed, 31 Oct 2012 02:24:50 -0400 X-MimeOLE: Produced By Microsoft Exchange V6.5 Content-class: urn:content-classes:message MIME-Version: 1.0 Content-Type: multipart/mixed; boundary="----_=_NextPart_001_01CDB730.6B3D5A51" Subject: =?big5?B?scTByrPmLblzpfM=?= Date: Wed, 31 Oct 2012 14:25:16 +0800 Message-ID: X-MS-Has-Attach: yes X-MS-TNEF-Correlator: thread-topic: =?big5?B?scTByrPmLblzpfM=?= thread-index: Ac23MH3YpZuLx2ejTYqR5PfoZ+IoBw== X-Priority: 1 Priority: Urgent Importance: high From: "Alice" [email protected] To: "Bob" [email protected] X-Spam-Score: undef - pointsoft.com.tw is whitelisted. X-CanIt-Geo: ip=59.124.242.126; country=TW; region=03; city=Taipei; latitude=25.0392; longitude=121.5250; http://maps.google.com/maps?q=25.0392,121.5250&z=6 X-CanItPRO-Stream: pioneerpos-com:default (inherits from rp-customers:default,base:default) X-Canit-Stats-ID: 02IhGoMJb - 2e7fa924443e - 20121031 X-CanIt-Archive-Cluster: irqpXI7aJGyo4Ewta7qVH399FOg X-Scanned-By: CanIt (www . roaringpenguin . com) on 174.142.115.36

  Read the article

• Fix ACPI DSDT of Amilo Pa 1538

  - by kayahr

  I have a Fujitsu-Siemens Amilo Pa 1538 laptops and installed Ubuntu 10.04 on it (Kernel 2.6.32). Main problem is that the fans of the notebook are always on even when the temperature is low. Another problem is that the display brightness can not be adjusted. Since some years I use Dell laptops and never experienced any ACPI problems so I thought that it is no longer needed to fix ACPI tables but now I have this crap of a laptop and I think I have to do it. Unfortunately I need some help repairing the DSDT. The dsdt.dat and dsdt.dsl of the laptop can be found here: http://www.ailis.de/~k/permdata/20100420/dsdt/ Compiling the DSDT gives the following output: # iasl -sa dsdt.dsl Intel ACPI Component Architecture ASL Optimizing Compiler version 20090521 [Jun 30 2009] Copyright (C) 2000 - 2009 Intel Corporation Supports ACPI Specification Revision 3.0a dsdt.dsl 81: Method (\_WAK, 1, NotSerialized) Warning 1080 - ^ Reserved method must return a value (_WAK) dsdt.dsl 207: Method (_L10, 0, NotSerialized) Warning 1087 - ^ Not all control paths return a value (_L10) dsdt.dsl 2861: Method (NVIF, 3, NotSerialized) Warning 1087 - ^ Not all control paths return a value (NVIF) dsdt.dsl 4551: Store (\_SB.PCI0.LPC0.PMRD (0xFA), Local0) Warning 1099 - Statement is unreachable ^ ASL Input: dsdt.dsl - 4962 lines, 162828 bytes, 2300 keywords AML Output: dsdt.aml - 17627 bytes, 591 named objects, 1709 executable opcodes Compilation complete. 0 Errors, 4 Warnings, 0 Remarks, 519 Optimizations Anyone here with DSDT experience who can help me fixing the DSDT?

  Read the article

• Having trouble using psservice and sc.exe between Windows Server 2008 machines

  - by Teflon Mac

  I'm trying to control services on one W2k8 machine from another; no domain just a workgroup. The user account I'm logged in as is an administrator on both machines. I've tried both psservice and sc.exe. These work in a Windows Server 2003 environment but it looks like I need to an extra step or two due to the changed security model in 2008. Any ideas as to how grant permission to the Service Control Manager (psservice) or OpenService (sc)? I tried running the DOS window with "Run As Administrator" and it made no difference. With psservice I get the following D:\mydir>psservice \\REMOTESERVER -u "adminid" -p "adminpassword" start "Display Name of Service" PsService v2.22 - Service information and configuration utility Copyright (C) 2001-2008 Mark Russinovich Sysinternals - www.sysinternals.com Unable to access Service Control Manager on \\REMOTESERVER: Access is denied. In the remote server, I get the following message in the Security Log so I know I connect and login to the remote machine. I assume it then fails on a subsequent authorization step. The logoff message in the security log is just that ("An account was logged off."), so no extra info there. Special privileges assigned to new logon. Subject: Security ID: REMOTESERVER\adminid Account Name: adminid Account Domain: REMOTESERVER Logon ID: 0xxxxxxxx Privileges: SeSecurityPrivilege SeBackupPrivilege SeRestorePrivilege SeTakeOwnershipPrivilege SeDebugPrivilege SeSystemEnvironmentPrivilege SeLoadDriverPrivilege SeImpersonatePrivilege sc.exe is similar. The command syntax and error differs as below but I also see the same login message in the remote server's security log. D:\mydir>sc \\REMOTESERVER start "Registry Name of Service" [SC] StartService: OpenService FAILED 5: Access is denied.

  Read the article

• Unable to install PHP-FPM on Apache (Failed to connect to FastCGI server)

  - by Nyxynyx

  I have been having problem installing php-fpm for use with apache2-mpm-worker. This is the guide that I am following. According to the guide's Step 5, Alias /php5-fcgi /usr/lib/cgi-bin/php5-fcgi FastCgiExternalServer /usr/lib/cgi-bin/php5-fcgi -host 127.0.0.1:9000 -pass-header Authorization However I cannot find php5-fcgi at /usr/lib, but only /usr/bin/php5-cgi and /usr/bin/php-cgi, which I am not sure if they are the same. So I changed the lines in Step 5 to: Alias /php5-fcgi /usr/bin/php5-fcgi FastCgiExternalServer /usr/bin/php5-fcgi -host 127.0.0.1:9000 -pass-header On restarting Apache, it's logs gave the errors: [notice] caught SIGTERM, shutting down [alert] (4)Interrupted system call: FastCGI: read() from pipe failed (0) [alert] (4)Interrupted system call: FastCGI: the PM is shutting down, Apache seems to have disappeared - bye [notice] Apache/2.2.22 (Ubuntu) mod_fastcgi/mod_fastcgi-SNAP-0910052141 configured -- resuming normal operations [notice] FastCGI: process manager initialized (pid 16348) And on loading the index page [error] [client 10.0.2.2] (111)Connection refused: FastCGI: failed to connect to server "/usr/bin/php5-cgi": connect() failed [error] [client 10.0.2.2] FastCGI: incomplete headers (0 bytes) received from server "/usr/bin/php5-cgi" [error] [client 10.0.2.2] File does not exist: /var/www/mydomain/public/favicon.ico Question: Any idea why php5-fcgi is missing, and how should this problem be fixed? Thank you!! :)

  Read the article

• Couldn't upload files to Sharepoint site while passing through Squid Proxy

  - by Ecio

  Hi all, we have this issue: one of our employees is collaborating with a supplier and he needs to upload documents on a Sharepoint site hosted on the supplier's main site. In our environment we use Squid Proxy to allow people navigate on the net (we have NTLM authentication and users transparently authenticate while using IE and FF). It seems that this specific Sharepoint site is using Integrated Windows Authentication only, and according to some research on the net it seems that this can have troubles with proxies. More specifically, we have tried two Squid versions: with Squid 3.0 we are unable to login to the site (the browser loads an empty page) with Squid 2.7 (that supports "Connection Pinning") we are able to login into the site, move on the different sections BUT.. when we try to upload a file that is bigger than a couple of KiloBytes (i.e. 10KB) the browser loads an error page (i think it's a 401 unauthorized but i must verify it) we've tried changing a couple of Squid options (in 2.7), what we got is that when you try to upload the file you got an authentication box (just like the initial login) and it refuses to go on even if you enter the same authentication credentials. What's really strange is that when you try to upload a small file (i.e. a text or binary 1KB file) the upload succeeds. I initially thought that maybe there was something misconfigured on their Sharepoint site but I've tried also this site: www.xsolive.com (it's a sharepoint 2007 demo site) and I've experienced the same problem. Has any of you experienced such behaviour? Thanks! Of course we've suggested to the supplier to activate also Basic+SSL and we're waiting for their reply..

  Read the article

• The boot selection failed because a required device is inaccessible 0xc000000e

  - by bbodenmiller

  A family member of mine recently went on vacation and turned off their computer, something they normally do not do, upon returning home it would not turn on and now returns the error message below. Generally friends and family come to me for help with computers and I have no problem, however this time I am a bit stumped. Any suggestions would be greatly appreciated. As you can see the error message is: Status: 0xc000000e Info: The best selection failed because a required device is inaccessible. Before going to this error message it briefly flashes the Windows loading screen. I have been able to confirm through the Windows RE Command Line and the dir command that the C: drive is accessible and likely is just suffering a bootup issue. I have tried: Launching the repair process discussed in the error message three times however each time it requires a restart and then returns to the same error message. Changing the boot order to be hard drive first Getting into safe mode; F8 just results in the same error message before I can get to the menu to select safe mode I have checked to make sure the BCD (bcdedit, Boot Configuration Data) is still intact as per https://www.symantec.com/business/support/index?page=content&id=TECH160475 I plan to try (but would like additional comments on): sfc /scannow; requires a restart and thus will likely result in the error message again A memory scan Bootrec as per http://support.microsoft.com/kb/927392#method1 Swapping IDE cables/ports Resetting the BIOS I noticed others with similar issues around the web are dual-booting however this machine is not setup in a dual-boot environment. Additionally at one point this error message supposedly showed up before I started working on the computer: The instruction at 0xfbe2584d referenced memory at 0x00000008. The memory could not be read. As previously stated any additional suggestions or words of advice would be greatly apprecaited.

  Read the article

• Cloudmin KVM DNS hostnames not working

  - by dannymcc

  I have got a new server which has Cloudmin installed. It's working well and I can create and manage VM's as expected. The server came with a /29 subnet and I requested an additional /29 subnet to allow for more virtual machines. I didn't want to replace the existing /29 subnet with a /28 because that would have caused disruption with my existing VM's. To make life easier I decided to configure a domain name for the Cloudmin host server to allow for automatic hostname setup whenever I create a new virtual machine. I have a domain name (example.com) and I have created an NS record as follows: NS kvm.example.com 123.123.123.123 A kvm.example.com 123.123.123.123 In the above example the IP address is that of the host server, I also have two /29 subnets routed to the server. Now, I've added the two subnets to the Cloudmin administration panel as follows: I've tried to hide as little information as possible without giving all of the server details away! If I ping kvm.example.com I get a response from 123.123.123.123, if I ping the newly created virtual machine (example.kvm.example.com) it fails, and if I ping the IP address that's been assigned to the new virtual machine (from the second subnet) it fails. Am I missing anything vital? Does this look (from what little information I can show) like it's setup correctly? Any help/pointers would be appreciated. For reference the Cloudmin documentation I am using as a guide is http://www.virtualmin.com/documentation/cloudmin/gettingstarted

  Read the article

• Configuring ASP.NET MVC2 on Apache 2.2 using mod_aspdotnet

  - by user40684

  Trying to get an MVC2 website to run on Apache 2.2 web server (running on Windows) that utilizes the mod_aspdotnet module. Have several ASP.NET Virtual Hosts running, trying to add another. MVC2 has NO default page (like the first version of MVC had e.g default.aspx). I have tried various changes to the config: commented out 'DirectoryIndex', changed it to '/'. Set 'ASPNET' to 'Virtual', will not load first page, always get: '403 Forbidden, You don't have permission to access / on this server.' Below is from my http.conf: LoadModule aspdotnet_module "modules/mod_aspdotnet.so" AddHandler asp.net asax ascx ashx asmx aspx axd config cs csproj licx rem resources resx soap vb vbproj vsdisco webinfo <IfModule aspdotnet_module> # Mount the ASP.NET /asp application #AspNetMount /MyWebSiteName "D:/ApacheNET/MyWebSiteName.com" Alias /MyWebSiteName" D:/ApacheNET/MyWebSiteName.com" <VirtualHost *:80> DocumentRoot "D:/ApacheNET/MyWebSiteName.com" ServerName www.MyWebSiteName.com ServerAlias MyWebSiteName.com AspNetMount / "D:/ApacheNET/MyWebSiteName.com" # Other directives here <Directory "D:/ApacheNET/MyWebSiteName.com"> Options FollowSymlinks ExecCGI AspNet All #AspNet Virtual Files Directory Order allow,deny Allow from all DirectoryIndex default.aspx index.aspx index.html #default the index page to .htm and .aspx </Directory> </VirtualHost> # For all virtual ASP.NET webs, we need the aspnet_client files # to serve the client-side helper scripts. AliasMatch /aspnet_client/system_web/(\d+)_(\d+)_(\d+)_(\d+)/(.*) "C:/Windows /Microsoft.NET/Framework/v$1.$2.$3/ASP.NETClientFiles/$4" <Directory "C:/Windows/Microsoft.NET/Framework/v*/ASP.NETClientFiles"> Options FollowSymlinks Order allow,deny Allow from all </Directory> </IfModule> Has anyone successfully run MVC2 (or the first version of MVC) on Apache with the mod_aspdotnet module? Thanks !

  Read the article

• Unable to install ffmpeg-php

  - by matt_tm

  Hi, I followed the instructions on http://www.mysql-apache-php.com/ffmpeg-install.htm but ffmpeg-php does not show up in my phpinfo() The commands I ran (in order) #yum install ffmpeg ffmpeg-devel ... Public key for faac-1.26-1.el5.rf.x86_64.rpm is not installed #rpm -Uhv http://apt.sw.be/redhat/el5/en/i386/rpmforge/RPMS/rpmforge-release-0.3.6-1.el5.rf.i386.rpm ... 1:rpmforge-release ########################################### [100%] #yum install ffmpeg ... Complete! #wget http://space.dl.sourceforge.net/project/ffmpeg-php/ffmpeg-php/0.6.0/ffmpeg-php-0.6.0.tbz2 ... #tar -xjf ffmpeg-php-0.6.0.tbz2 #cd ffmpeg-php-0.6.0 #phpize ... configure: error: ffmpeg headers not found. Make sure ffmpeg is compiled as shared libraries using the --enable-shared option #yum install ffmpeg-devel ... Complete! #./configure ... config.status: creating config.h #make ... Build complete. Don't forget to run 'make test'. #make install Installing shared extensions: /usr/local/lib/php/extensions/no-debug-non-zts-20090626/ #ls -al /usr/local/lib/php/extensions/no-debug-non-zts-20090626/ ... -rwxr-xr-x 1 root root 185285 Sep 20 03:36 ffmpeg.so* ... #nano /usr/local/lib/php.ini In which I put these two lines at the end of the php.ini file [ffmpeg] extension=ffmpeg.so Then, #service httpd restart But phpinfo() still does not show any 'ffmpeg' section. This is the correct php.ini because: #php -i | grep php\.ini Configuration File (php.ini) Path => /usr/local/lib Loaded Configuration File => /usr/local/lib/php.ini

  Read the article

• Is there any way to tweak / rotate mouse orientation? Any applications? Registry edits?

  - by calbar

  I've got a very frustrating issue with my new Logitech Marathon Mouse M705. It is absolutely perfect for what I need, with the exception that it tracks on an angle for some reason. What I mean is when you slide the cursor to the left, it trends upward - when you slide to the right, it trends down. Moving the cursor along a flat horizontal line is no longer a natural motion - you need to fight what I suspect is a mechanical error of some kind. Unfortunately, I've already exchanged this mouse once and tested both on different Windows 7 and Mac OS machines - the problem continues to occur. So is there a software solution for me? I'm incredibly surprised there is no simple way to adjust the orientation... How can every mouse manufacturer possibly adjust their hardware to track to everyone's tastes? What about those who need to flip orientation a full 90 or 180 degrees? I only need to adjust mine a few degrees, but I'm sure that need has arisen as well. Anyway, I'm running the latest SetPoint drivers (6.00) on Windows 7 and there are no orientation options available. I've checked out uberOptions (http://uberoptions.net/) and the M705 isn't supported yet (with the last version update over 6 months ago). MAF Mouse (http://www.maf-soft.de/mafmouse/) instructions are a very strange series of mouse clicks to activate? This app also seems a little overkill and costs $$ (which I'm willing to pay as a last resort). Is there no universal registry value for mouse orientation? How about for SetPoint drivers specifically? I've done a simple search in regedit without any luck. An XML file somewhere? Anything?? Thanks a million for any help - it's driving me nuts!

  Read the article

• Debian Apache2 and SSL

  - by Topher Fangio

  Hello all, I recently took over a server that is using Apache2 with SSL. I have setup a new server to which I am migrating all of the old websites so that we can more easily scale (it's a cloud server) and so that I can set everything up correctly (or at least with some sort of convention). I have read quite a few articles on setting up Apache2 and SSL with virtual hosts, but I'm a bit confused because all of the examples show three files and I only seem to have two. To compound the problem, they are all named differently (do the file extensions actually make a difference?). The examples show something to this effect: <VirtualHost X.X.X.X:443> ServerAlias something.mydomain.com ServerAdmin [email protected] DocumentRoot /var/www/project/client/site SSLEngine on SSLCertificateFile /etc/ssl/certs/mydomain-cert.pem SSLCertificateKeyFile /etc/ssl/private/mydomain-key.pem SSLCertificateChainFile /etc/ssl/certs/mydomain-ca.crt </VirtualHost> However, the files I have are: _.mydomain.com.crt gd_bundle.crt It is a wildcard certificate that we purchased through GoDaddy I believe. I believe that the first file is the actual certificate file and the gd_bundle.crt is the chain file, but that leaves me without a key file. There is also a random mydomain.csr file lying around on the old server, but it wasn't one of the files bundled with the download from GoDaddy, so I'm not really sure as to what it is. Any help in figuring out what I need to do would be greatly appreciated. I am software developer, so I know my way around computers, but I have only dabbled in server setup/maintenance. Much Thanks!

  Read the article

< Previous Page | 655 656 657 658 659 660 661 662 663 664 665 666  | Next Page >