Search Results

Search found 2777 results on 112 pages for '2009'.

Page 66/112 | < Previous Page | 62 63 64 65 66 67 68 69 70 71 72 73  | Next Page >

• Dual Monitor Setup with Ati Radeon Hd 5700 results in unusabledesktop win7

  - by NorthPole

  I have an ATI Radeon HD 5700 card which i've been using under fully updated windows 7 with its latest drivers. My monitor is a 2004 NEC LCD1703M which despite being pretty old runs fine. A friend gave me an IIYAMA ProLite E1900WS monitor (2009 or 20010 ). Both monitors are vga only. I've been using a DLDVI to VGA adapter to connect my old monitor and tested the same adapter to the new monitor and it worked fine. So I bought an HDMI to vga adapter with the purpose of having a dual monitor setup. But when both screens are connected to the card the following problem occurs: The monitor connected to the hdmi port cycles between sleep and a black screen while the other shows the operating system for about two seconds before getting black for another two seconds. I can "use" the computer (move the mouse,click,type e.t.c.) while this happens but its not something pleasant. I tried reinstalling the driver, booting with both screens connected (in which case the powerup messages and the bios are mirrored in both screens until I get to the login screen where everything falls apart) Funny thing is, everything works if I disconnect the ATI graphics card and use the onboard intel one. So, any suggestions as to what might be the problem and how I can fix it?

  Read the article

• Are applications optimized for XenApp?

  - by damitamit

  Our IT dept are about to deploy virtualized apps using Citrix XenApp. One of these apps will be Dynamics AX 4.0 SP2, a ERP client (which I develop on). They have supposedly reached a roadblock because an external 'Dynamics AX Consultant' has told our IT Dept that Dynamics 4 will not work optimally on Citrix and will run very slow because it is not optimized for Citrix. We have it running in a Test environment now and seems ok. They have been told that the only 'solution' is to upgrade to Dynamics AX 2009 where supposedly this problem as been fixed. (not a small task for my team!) When I heard about this, I was quite surprised. From my brief knowledge of Citrix, I thought it would be application independent. How does the citrix app virtualization work, in that a particular app would work better than others on citrix? Would the speed of the virtualized app not just depend on the resources/network connection the citrix server has? FYI, Dynamics AX is a 3-tier client/server system, so the client will be accessing a AOS application server, which then accesses the database. Please enlighten me :)

  Read the article

• scp No such file or directory

  - by Joe

  I've a confusing question for which superuser doesn't seem to have a good answer, and neither google. I'm trying to scp a file from a remote server to my local machine. The command is this scp user@server:/path/to/source/file.gz /path/to/destination The error I get is: scp: /path/to/source/file.gz: No such file or directory user is my username on the server. The command syntax appears fine to me. ssh works fine and I can cd to the file and it doesn't seem to be an access control issue? Thanks; Edit: Thank you John. I spotted the issue. ls returned this: -r--r--r-- 1 nobody users 168967171 Mar 10 2009 /path/to/source/file.gz So, the file was on a read-only file system and user is able to read it but not scp. I just copied the file to a different directory and chown it and worked fine. It would be good if someone can explain why this is the case though.

  Read the article

• lm-sensors - always returns 32 degrees (celsius) for temperature

  - by mopoke

  On my VIA EPIA motherboard (using VIA VT8231 ISA bridge), I get strange output for the lm-sensors temperature reading. It always returns 32 degrees (celsius). I have previously had correct output for temperature (my munin graphs show temperatures typically in the range of 50 to 60 degrees. I've tried uninstalling (and purging) the lm-sensors package, have re-run sensors-detect a number of times and rebooted but nothing seems to change the output. I am running Ubuntu Karmic Koala (9.10). Anyone got any bright ideas on what I might have missed? uname -a: Linux george 2.6.31-16-386 #53-Ubuntu SMP Tue Dec 8 06:39:34 UTC 2009 i686 GNU/Linux cpuinfo: processor : 0 vendor_id : CentaurHauls cpu family : 6 model : 7 model name : VIA Samuel 2 stepping : 3 cpu MHz : 399.000 cache size : 64 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu de tsc msr cx8 mtrr pge mmx 3dnow up bogomips : 800.04 clflush size : 32 power management: lspci: 00:00.0 Host bridge: VIA Technologies, Inc. VT8601 [Apollo ProMedia] (rev 05) 00:01.0 PCI bridge: VIA Technologies, Inc. VT8601 [Apollo ProMedia AGP] 00:11.0 ISA bridge: VIA Technologies, Inc. VT8231 [PCI-to-ISA Bridge] (rev 10) 00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) 00:11.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 1e) 00:11.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 1e) 00:11.4 Bridge: VIA Technologies, Inc. VT8235 ACPI (rev 10) 00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT82C686 AC97 Audio Controller (rev 40) 00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 51) 01:00.0 VGA compatible controller: Trident Microsystems CyberBlade/i1 (rev 6a) sensors: acpitz-virtual-0 Adapter: Virtual device temp1: +32.0°C (crit = +60.0°C)

  Read the article

• Using "route add" to tell my computer to use a direct ethernet connexion instead of wifi ?

  - by TheSamFrom1984

  2 PCs are involved. Both are connected to the internet via Wifi on the same router. I can ping to/from each other and share folders flawlessly, but I'd like to be able to set a direct Ethernet link between them to speed up file transfers AND keep the Wifi connections (no gateway). So I plugged my RJ45 cable, and set up the connection. It works, but the PCs are only using this connection if one of them if disconnected from the Wifi. PC1 local address is 192.168.0.7 on its ethernet interface, and 192.168.1.21 on the wifi one. PC2 local address is 192.168.0.6 on its ethernet interface, and 192.168.1.22 on the wifi one. My question is : I'd like to using the route add command to tell PC1 to use the Ethernet interface when it needs to connect with PC2, by specifying "IF 2" at the end of the route add command. How can I do this ? I don't know what to put in the "gateway" parameter of the command, and everything I tried returns "the parameter is incorrect" (i don't know which one). ipconfig /all on PC1 : Windows IP Configuration Host Name . . . . . . . . . . . . : Sam-PC Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No Wireless LAN adapter Wireless Network Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : NETGEAR WG111v3 54Mbps Wireless USB 2.0 Adapter Physical Address. . . . . . . . . : 00-22-3F-DA-51-56 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::1d33:60b:476c:d396%12(Preferred) IPv4 Address. . . . . . . . . . . : 192.168.1.21(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : vendredi 27 novembre 2009 15:38:48 Lease Expires . . . . . . . . . . : dimanche 29 novembre 2009 07:33:04 Default Gateway . . . . . . . . . : 192.168.1.1 DHCP Server . . . . . . . . . . . : 192.168.1.1 DHCPv6 IAID . . . . . . . . . . . : 301998655 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-12-7E-58-EA-00-1A-4D-59-B2-71 DNS Servers . . . . . . . . . . . : 192.168.1.1 NetBIOS over Tcpip. . . . . . . . : Enabled Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller Physical Address. . . . . . . . . : 00-1A-4D-59-B2-71 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::f598:c3a0:df8d:706e%11(Preferred) IPv4 Address. . . . . . . . . . . : 192.168.0.7(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : DHCPv6 IAID . . . . . . . . . . . : 234887757 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-12-7E-58-EA-00-1A-4D-59-B2-71 DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1 fec0:0:0:ffff::2%1 fec0:0:0:ffff::3%1 NetBIOS over Tcpip. . . . . . . . : Enabled

  Read the article

• How to enable error log in lighttpd properly?

  - by Tomaszs

  I have a Centos 5 system with Lighttpd and fastcgi enabled. It does log access but does not log errors. I have Internal Server Error 500 and no info in log and when I try to open not -existing file also - no info in error log. How to enable it properly? Below is list of modules that I've enabled: server.modules = ( "mod_rewrite", "mod_redirect", "mod_alias", # "mod_access", # "mod_cml", # "mod_trigger_b4_dl", # "mod_auth", "mod_status", "mod_setenv", "mod_fastcgi", # "mod_webdav", # "mod_proxy_core", # "mod_proxy_backend_fastcgi", # "mod_proxy_backend_scgi", # "mod_proxy_backend_ajp13", # "mod_simple_vhost", # "mod_evhost", # "mod_userdir", # "mod_cgi", # "mod_compress", # "mod_ssi", # "mod_usertrack", # "mod_expire", # "mod_secdownload", # "mod_rrdtool", "mod_accesslog" ) Here are setting of debugging: ## enable debugging #debug.log-request-header = "enable" #debug.log-response-header = "enable" #debug.log-request-handling = "enable" debug.log-file-not-found = "enable" #debug.log-condition-handling = "enable" Setting of path to error and access log: ## where to send error-messages to server.errorlog = "/home/lxadmin/httpd/lighttpd/error.log" #### accesslog module accesslog.filename = "/home/lxadmin/httpd/lighttpd/ligh.log" Settings of fastcgi: fastcgi.debug = 1 fastcgi.server = ( ".php" => (( "bin-path" => "/usr/bin/php-cgi", "socket" => "/tmp/php.socket", "max-procs" => 12, "bin-environment" => ( "PHP_FCGI_CHILDREN" => "2", "PHP_FCGI_MAX_REQUESTS" => "500" ) ))) And in included config file I have: server.errorlog = "/home/httpd/mywebsite.com/stats/mywebsite.com-error_log" What comes to log files: /home/httpd/mywebsite.com/stats/ -rw-r--r-- 1 apache apache 5173239 May 16 11:34 mywebsite.com-custom_log -rwxrwxrwx 1 root root 0 Mar 27 2009 mywebsite.com-error_log /home/lxadmin/httpd/lighttpd/ -rwxrwxrwx 1 apache apache 2184 Apr 22 22:59 error.log -rwxrwxrwx 1 apache apache 6088621 May 16 11:26 ligh.log I gave error logs chmod 777 for a try to check if it's the issue, but apparently it's not. So my question is: what to do to have error log enabled?

  Read the article

• Linux: prevent VNC from swapping like mad

  - by Weezy

  I'm accessing a MacMini (with MacOS X 10.4) from my Linux machine using VNC and there's an issue that is driving me crazy... My Linux machine has 4 GB of ram and I run a lot of various apps on it and I've got no issue at all. It's all snappy and don't hear the hard disk swapping/read/writing too often. Now with VNC, the hard disk is swapping like mad... When I'm moving things on the OS X desktop. So I was thinking of creating a ramdisk and forcing the temp VNC files to go into that ramdisk but the problem is I can't find any temp files. I've attempted to do that: #!/bin/bash while [ true ] do lsof | grep vnc done And eyeball parse the output to try to find some temp file: no luck. The VNC version I'm using is this one: $ vncviewer -version VNC Viewer Free Edition 4.1.1 for X - built Jan 30 2009 19:33:16 Copyright (C) 2002-2005 RealVNC Ltd. No matter how much data is coming from the Mac, there should be plenty of memory (4 GB of ram) so there's really no reason to swap like crazy. This is driving me mad. Any help as to how I could solve this problem is most welcome because this is literally driving me nuts.

  Read the article

• Why a 10 years old software still is so slow even today?

  - by Cawas

  I just noted this question due to a game (which happens to be Diablo 2), but the matter of fact is: why is my brand new mac book pro, made in 2009 with latest technology (tho it's the cheapest one) can't rival my computer which used to run this much faster back in 2000? Really, it was much faster on my AMD K6 450 back in those days, and I could even run two clients at same time with no slow down. I've always had the feeling this machine was slow, but this is a very odd way to attest it. Granted, the machine is smaller, runs on wifi and "boots" way faster thanks to sleep mode. But other than that, what have we evolved after all?! I'm pretty sure this shouldn't be graphical card's fault. Sure if I buy latest technology it will run fast, and probably most people here can confirm this and won't even understand my question. But the thing is, all the hardware is supposedly much faster and better than the stuff from 10 years ago. The software and operating system became more complex, but also more well refined. Now I'm trying a piece of software that is actually 10 years old and it's not getting any better results! Why?

  Read the article

• What could cause a WMV to not play to completion in a browser?

  - by Ty W

  A realtor has had videos created for a community she is selling homes for, the people who made the videos gave them to us in WMV format. I can play these videos without any problem in Windows Media Player, VLC, and Quicktime (via Flip4Mac). I can play the videos from their location at videohomeguide.com in my browser without any trouble. However when I upload the files to our server the video stops at about the 1 minute mark in Safari and FireFox on Mac OS X Snow Leopard. I'm not sure if Windows browsers have the same issue because they are loaded using Windows Media Player. http://carolepaul.com/images/uploads/cottageslsjamestown.wmv <- our server, will fail at 1:09ish. http://www.videohomeguide.com/media/cottageslsjamestown.wmv <- should play to completion (3:27ish) The files generate the same MD5 hash on my desktop and on our server. I used WGET to transfer the files, always downloading from videohomeguide.com. Since the files are identical and are playable using VLC/WMP/Quicktime, and playable in the browsers from videohomeguide.com it seems to me that it is some sort of server config... maybe incorrect headers sent to the browsers? Here are the headers sent and received by FireFox on OS X: http://carolepaul.com/images/uploads/cottageslsjamestown.wmv GET /images/uploads/cottageslsjamestown.wmv HTTP/1.1 Host: carolepaul.com User-Agent: Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10.6; en-US; rv:1.9.2.2) Gecko/20100316 Firefox/3.6.2 Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 Accept-Language: en-us,en;q=0.5 Accept-Encoding: gzip,deflate Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7 Keep-Alive: 115 Connection: keep-alive HTTP/1.1 200 OK Date: Mon, 29 Mar 2010 20:43:20 GMT Server: Apache/1.3.41 (Unix) PHP/5.2.6 FrontPage/5.0.2.2635 mod_psoft_traffic/0.2 mod_ssl/2.8.31 OpenSSL/0.9.8b Last-Modified: Wed, 02 Dec 2009 18:08:46 GMT Etag: "1e7919c-198eadc-4b16ad2e" Accept-Ranges: bytes Content-Length: 26798812 Keep-Alive: timeout=10, max=200 Connection: Keep-Alive Content-Type: video/x-ms-wmv

  Read the article

• Can't mount FAT32 drive under Ubuntu Linux

  - by Josh

  I have a 320GB USB drive with a single large FAT32 partition. The volume mounts perfectly fine on my Mac OS X 10.5.8 machine and Disk Utility on the mac reports no issues with the volume. I can read/write all data on the drive. However when I connect the drive to my Ubuntu 9.10 Karmic system, the partition does not mount. dmesg|tail says: [ 2752.334822] scsi3 : SCSI emulation for USB Mass Storage devices [ 2752.335040] usb-storage: device found at 3 [ 2752.335044] usb-storage: waiting for device to settle before scanning [ 2757.330301] usb-storage: device scan complete [ 2757.331005] scsi 3:0:0:0: Direct-Access WD 3200AAK External 1.65 PQ: 0 ANSI: 0 [ 2757.331772] sd 3:0:0:0: Attached scsi generic sg2 type 0 [ 2757.355647] sd 3:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 2757.360737] sd 3:0:0:0: [sdb] Write Protect is off [ 2757.360749] sd 3:0:0:0: [sdb] Mode Sense: 00 00 00 00 [ 2757.360755] sd 3:0:0:0: [sdb] Assuming drive cache: write through [ 2757.367618] sd 3:0:0:0: [sdb] Assuming drive cache: write through [ 2757.367631] sdb: sdb1 [ 2762.797622] sd 3:0:0:0: [sdb] Assuming drive cache: write through [ 2762.797636] sd 3:0:0:0: [sdb] Attached SCSI disk [ 2822.866228] FAT: bogus number of reserved sectors [ 2822.866237] VFS: Can't find a valid FAT filesystem on dev sdb1. When I run fsck.vfat -a /dev/sdb1 I get: root@cartman:~# fsck.vfat -a /dev/sdb1 dosfsck 3.0.3, 18 May 2009, FAT32, LFN Logical sector size is zero. Googling "vfat Logical sector size is zero" produced no consensus as to the solution. I would prefer not to have to completely reformat the disk if possible because it contains about 280GB of data I would rather not have to find a temporary home for. Any suggestions?

  Read the article

• Problem posting multipart form data using Apache with mod_proxy to a mongrel instance

  - by Ryan E

  I am attempting to simulate my site's production environment as closely as I can on my local machine. This is a rails site that uses Apache w/ mod_proxy to forward requests to a mongrel cluster. On my Mac OSX Leopard machine, I have the default install of apache running and have configured a vhost to use mod_proxy to to forward requests to a local running mongrel instance on port 3000. <Proxy balancer://mongrel_cluster-development> BalancerMember http://127.0.0.1:3000 </Proxy> For the most part, this is working fine. I can browse my development site using the ServerName of the vhost I configured and can confirm that requests are being properly forwarded to the mongrel instance. However, there is a page on the site that has a multipart form that is used to upload an image to the server. When I post this form, there is a delay of about 5 minutes and the browser ultimately returns a Bad Request Your browser sent a request that this server could not understand. In the error log for my vhost: [Tue Sep 22 09:47:57 2009] [error] (70007)The timeout specified has expired: proxy: prefetch request body failed to 127.0.0.1:3000 (127.0.0.1) from ::1 () This same form works fine if I browse directly to the mongrel instance (http://127.0.0.1:3000). Anybody have any idea what the problem might be and how to fix it? If there is any important information that I neglected to include, post a comment, and I can add to this question. Note: Upon further investigation, this appears to be a problem specific to Safari. The form works fine in Firefox.

  Read the article

• X11 performance problem after upgrading from Centos3 to Centos5 with an ATI Rage XL

  - by Marcelo Santos

  After upgrading a computer from Centos3 to Centos5 an application that does a lot of scrolling took a very high performance hit. top tells me that X is using a lot of CPU and that was not happening before. The machine has an ATI Rage XL with 8MB and X is using the ati driver as there is no proprietary ATI driver for this board on linux. The xorg.conf: Section "Device" Identifier "Videocard0" Driver "ati" EndSection Section "Screen" Identifier "Screen0" Device "Videocard0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 Modes "1024x768" "800x600" "640x480" EndSubSection EndSection Section "DRI" Group 0 Mode 0666 EndSection A similar machine that still has Centos3 installed is able to start DRI on the X server while this one is not, this is the Xorg.0.log for the Centos5 machine: drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: Open failed drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: Open failed [drm] failed to load kernel module "mach64" (II) ATI(0): [drm] drmOpen failed (EE) ATI(0): [dri] DRIScreenInit Failed (II) ATI(0): Largest offscreen areas (with overlaps): (II) ATI(0): 1024 x 1279 rectangle at 0,768 (II) ATI(0): 768 x 1280 rectangle at 0,768 (II) ATI(0): Using XFree86 Acceleration Architecture (XAA) Screen to screen bit blits Solid filled rectangles 8x8 mono pattern filled rectangles Indirect CPU to Screen color expansion Solid Lines Offscreen Pixmaps Setting up tile and stipple cache: 32 128x128 slots 10 256x256 slots (==) ATI(0): Backing store disabled (==) ATI(0): Silken mouse enabled (II) ATI(0): Direct rendering disabled (==) RandR enabled I also tried using EXA instead of XAA and setting: Option "AccelMethod" "XAA" Option "XAANoOffscreenPixmaps" "true" uname -a Linux sir5.erg.inpe.br 2.6.18-128.7.1.el5 #1 SMP Mon Aug 24 08:20:55 EDT 2009 i686 i686 i386 GNU/Linux rpm -qa | grep xorg-x11-server xorg-x11-server-utils-7.1-4.fc6 xorg-x11-server-sdk-1.1.1-48.52.el5 xorg-x11-server-Xvfb-1.1.1-48.52.el5 xorg-x11-server-Xnest-1.1.1-48.52.el5 xorg-x11-server-Xorg-1.1.1-48.52.el5 The drmOpenDevice error continues when using the suggested Option "AIGLX" "true".

  Read the article

• Connecting XRAID to Sunfire via LSI FC card - Drives not showing up

  - by Matthew Watson

  Hi, I've got a Sunfire T1000 machine ( Solaris 10 10/09 s10s_u8wos_08a SPARC ) with a LSI7404EP-LC fibre channel card in it. This is plugged into an XRAID. The system seems to have picked up the card > /usr/platform/`uname -i `/sbin/prtdiag IO Location Type Slot Path Name Model ----------- ----- ---- --------------------------------------------- ------------------------- --------- MB/PCIE0 PCIE 0 /pci@780/fibre-channel fibre-channel MB/PCIE0 PCIE 0 /pci@780/fibre-channel fibre-channel MB/NET0 PCIE MB /pci@7c0/pci@0/network@4 network-pci14e4,1668 MB/NET1 PCIE MB /pci@7c0/pci@0/network@4,1 network-pci14e4,1668 MB/NET2 PCIX MB /pci@7c0/pci@0/pci@8/network@1 network-pci108e,1648 MB/NET3 PCIX MB /pci@7c0/pci@0/pci@8/network@1,1 network-pci108e,1648 MB/PCIX PCIX MB /pci@7c0/pci@0/pci@8/scsi@2 scsi-pci1000,50 LSI,1064 However it doesn't seem to be able to see the xraid attached to it, lsiutil only reports the onboard SAS controller. > /usr/local/bin/lsiutil ~ LSI Logic MPT Configuration Utility, Version 1.62, January 14, 2009 1 MPT Port found Port Name Chip Vendor/Type/Rev MPT Rev Firmware Rev IOC 1. mpt0 LSI Logic SAS1064 A3 105 010a0000 0 Select a device: [1-1 or 0 to quit] I've tried adding the configuration to /kernal/drv/sd.conf and /kernal/drv/ssd.conf as per this thread, however format still cannot see any drives on the xraid. I'm not sure where to go next. Any suggestions? From what I've read..this should pretty much just eb plug it in and they show up in format..

  Read the article

• Can't install PHP after apt-get dist-upgrade

  - by WASD42

  I had a server with perfectly running for months classical LAMP installation on Ubuntu 8.04: Linux localhost 2.6.24-23-generic #1 SMP Wed Apr 1 21:47:28 UTC 2009 i686 GNU/Linux DISTRIB_ID=Ubuntu DISTRIB_RELEASE=8.04 DISTRIB_CODENAME=hardy DISTRIB_DESCRIPTION="Ubuntu 8.04.4 LTS" Don't know why I've started apt-get update, apt-get upgrade but everything ended with apt-get dist-upgrade :) Everything gone alright... But now I can't start nor Apache, nor PHP, because PHP was simply deleted. When I'm trying to install it: > apt-get install php5 <...> The following packages have unmet dependencies: php5: Depends: libapache2-mod-php5 (>= 5.2.4-2ubuntu5.17) but it is not going to be installed or php5-cgi (>= 5.2.4-2ubuntu5.17) but it is not going to be installed E: Broken packages When I'm trying to install libapache2-mod-php5: The following packages have unmet dependencies: libapache2-mod-php5: Depends: php5-common (= 5.2.4-2ubuntu5.17) but 5.3.6-6~dotdeb.1 is to be installed E: Broken packages I don't know what 5.3.6-6~dotdeb.1 is and where is this package, because I've already removed dotdeb repository from APT sources :/ Tried to do apt-get update, apt-get upgrade, apt-get install php5 php5-common php5-cli with no success... Don't know what to try next :(

  Read the article

• Passive FTP Server Port Configuration Troubles Win2003

  - by Chris

  Win2003 Ports 20 & 21 are open IIS6 - Direct Metabase Edit enabled Configured FTP service passive range to 5500-5550 5500-5550 added to windows firewall iisreset and double checked by restarting ftp service nothing has changed, when I connect and enter passive, it still hangs when ever I try to LIST or transfer files. Active is just as useless. Microsoft Windows [Version 6.1.7600] Copyright (c) 2009 Microsoft Corporation. All rights reserved. C:\Users\user>ftp ftp> open x.x.x.x Connected to x.x.x.x. 220-Microsoft FTP Service xxxxxxxxxxxxxxxxxx 220 xxxxxxxxxxxxxxxxxx User (x.x.x.x:(none)): user 331 Password required for user. Password: 230-YOUR ACTIVITY IS BEING RECORDED TO THE FULLEST EXTENT 230 User user logged in. ftp> QUOTE PASV 227 Entering Passive Mode (82,19,25,134,21,124) ftp> ls 200 PORT command successful. 150 Opening ASCII mode data connection for file list. and it hangs.. Now I can see from microsooft documentation that on newer windows releases, additional steps such as these are suggested, but they dont work on 2003... netsh advfirewall firewall add rule name=”FTP Service” action=allow service=ftpsvc protocol=TCP dir=in netsh advfirewall set global StatefulFTP disable is there anything I am missing, what is this StatefulFTP malarkey at the end EDIT I can connect and transfer binary files using WinSCP client - Therefore the problem must be with my ftp commands no? Can anyone see anything wrong with my windows ftp client example? why would it hang on ls, i tried QUOTE LIST as well, and that just hangs, and the windows ftp client doesnt work in active, it hangs if I try to go "binary" then put - This worked before I added 5500-5550 on the router. I have since added this range to the router but no difference to the windows ftp client.

  Read the article

• File corruption after copying files in Windows 7 64 bit using two methods

  - by DustByte

  I have 5000 pictures and other files in a directory taking up 35 GB. I want to duplicate this directory. Method 1: I do a simple copy and paste of the directory in explorer. I have the habit of checking the checksums after copying important files. In this case I noticed that around 2000 files failed the MD5 test. At a closer inspection of a randomly chosen JPEG with different checksums it turns out that some XMP metadata had changed. In particular, the tag <MicrosoftPhoto:DateAcquired> had changed the date from 2009 to today (possibly around the time I was copying the files). I have no idea what triggered this XMP data to be changed and exactly when it was changed and why for these particular files, but at least it seems to explain the checksum discrepancy. Method 2: As I want the exact files to be duplicated, I tried the program FreeFileSync to mirror the directory, hoping no XMP metadata would mysteriously change. A checksum test in addition to a thorough file comparison test in FreeFileSync lead to two similar but yet different results: 31 files fail the checksum test, 23 files fail the file comparison test. The smaller set is not entirely contained in the bigger set, although many files occur in both. What is alarming here is that not only JPEGs are flagged as altered but also som AVIs, MPGs and a large 7-zip file. Closer inspection of a JPEG indicates that it is indeed corrupt: the bottom half of the picture is simply plain gray. Due to the size of the 7-zip file, I have not been able to pin down the discrepancy. Note, in both methods, every file has its correct file size after being copied. Question: Any thoughts on what is possibly going on here? I have never had this problem before, and I am now terrified that files get corrupted after simple actions like copy/paste and file sync. Even if I manage to successfully copy the files somehow, I would still like an explanation to this.

  Read the article

• Transparent proxying in MacOS X 10.6 Snow Leopard (and maybe FreeBSD)

  - by apenwarr

  I'm trying to create a transparent proxy on my MacOS machine in order to port the sshuttle ssh-based transproxy VPN from Linux. I think I almost have it working, but sadly, almost is not 100%. Short version is this. In one window, start something that listens on port 12300: $ while :; do nc -l 12300; done Now enable proxying: # sysctl -w net.inet.ip.forwarding=1 # sysctl -w net.inet.ip.fw.enable=1 # ipfw add 1000 fwd 127.0.0.1,12300 log tcp from any to any And now test it out: $ telnet localhost 9999 # any port number will do # this works; type stuff and you'll see it in the nc window $ telnet google.com 80 # any host/port will do # this *doesn't* work! After the latter experiment, I see lines like this in netstat: $ netstat -tn | grep ^tcp4 tcp4 0 0 66.249.91.104.80 192.168.1.130.61072 SYN_RCVD tcp4 0 0 192.168.1.130.61072 66.249.91.104.80 SYN_SENT The second socket belongs to my telnet program; the first is more suspicious. SYN_RCVD implies that my SYN packet was correctly captured by the firewall and taken in by the kernel, but apparently the SYNACK was never sent back to telnet, because it's still in SYN_SENT. On the other hand, if I kill the nc server, I get this: $ telnet google.com 80 Trying 66.249.81.104... telnet: connect to address 66.249.81.104: Connection refused telnet: Unable to connect to remote host ...which is as expected: my proxy server isn't running, so ipfw redirects my connection to port 12300, which has nobody listening on it, ie. connection refused. My uname says this: $ uname -a Darwin mean.local 10.2.0 Darwin Kernel Version 10.2.0: Tue Nov 3 10:37:10 PST 2009; root:xnu-1486.2.11~1/RELEASE_I386 i386 Does anybody see any different results? (I'm especially interested in Snow Leopard vs Leopard results, as there seem to be some internet rumours that transproxy is broken in Snow Leopard version) Any advice for how to fix?

  Read the article

• Cisco Catalyst 4500 Policy Based Routing

  - by Logan

  In order to test a new firewall I just set up I'm trying to implement policy based routing on our core switch. I want traffic from certain vlans to be routed to the new firewall while everything else continues being routed through the old firewall. I was trying to use this guide. Everything from that guide works fine except trying to run the "ip policy route-map" command in the interface configuration mode. IOS is telling me that such a command doesn't exist. A "show ip interface vlan" command says that policy routing is disabled. Any ideas? Output of "show ver": Cisco IOS Software, Catalyst 4500 L3 Switch Software (cat4500-IPBASEK9-M), Version 12.2(53)SG, RELEASE SOFTWARE (fc3) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2009 by Cisco Systems, Inc. Compiled Thu 16-Jul-09 19:49 by prod_rel_team Image text-base: 0x10000000, data-base: 0x11D1E3CC ROM: 12.2(31r)SG2 Dagobah Revision 226, Swamp Revision 34 RTTMCB2223-1 uptime is 3 years, 22 weeks, 2 days, 19 hours, 28 minutes Uptime for this control processor is 51 weeks, 2 days, 18 hours, 2 minutes System returned to ROM by power-on System restarted at 19:22:02 UTC Tue Jul 12 2011 System image file is "bootflash:cat4500-ipbasek9-mz.122-53.sg.bin" ... cisco WS-C4510R (MPC8245) processor (revision 4) with 524288K bytes of memory. Processor board ID FOX103703W3 MPC8245 CPU at 400Mhz, Supervisor V Last reset from PowerUp 42 Virtual Ethernet interfaces 244 Gigabit Ethernet interfaces 511K bytes of non-volatile configuration memory. Configuration register is 0x2

  Read the article

• Exchange DiskShadow/Robocopy backup does not purge log files

  - by Robert Allan Hennigan Leahy

  I have a series of scripts setup to backup my Exchange. The following command is executed to start the process: diskshadow /s C:\Backup_Scripts\exchangeserverbackupscript1.dsh This is exchangeserverbackupscript1.dsh: #DiskShadow script file set verbose on #delete shadows all set context persistent writer verify {76fe1ac4-15f7-4bcd-987e-8e1acb462fb7} set metadata C:\Backup_Scripts\shadowmetadata.cab begin backup add volume C: alias SH1 create expose %SH1% P: exec C:\Backup_Scripts\exchangeserverbackupscript1.cmd end backup delete shadows exposed P: exit #End of script And this is exchangeserverbackupscript1.cmd: robocopy "P:\Program Files\Microsoft\Exchange Server\Mailbox\First Storage Group" "\\leahyfs\J$\E-Mail Backups\Day 1" /MIR /R:0 /W:0 /COPY:DT /B This is not causing Exchange to purge its log files. The edb file is 4.7 gigabytes, but the First Storage Group folder itself is 50+ gigabytes due to many, many log files for each day going back to 2009. Is there any way -- I've Googled and haven't found anything -- to notify Exchange when I've completed a full backup, and have it purge its log files? According to this and this, end backup should cause Exchange to "flush the transaction logs for that storage group" but only "if a successful backup of a storage group occurred", which leaves my question as: What constitutes a "successful backup", and why is what I'm doing not it?

  Read the article

• LDAP Authentication fails with 500 or 401 depending on bind for Apache2

  - by Erik

  I'm setting up LDAP authentication for our Subversion repository hosted through Apache on a RHEL 5 system. I run into two different issues when I try to authenticate against Active Directory. <Location /svn/> Dav svn SvnParentPath /srv/subversion SVNListParentPath On AuthType Basic AuthName "Subversion Repository" AuthBasicProvider ldap AuthLDAPBindDN "cn=userfoo,ou=Service Accounts,ou=User Accounts,dc=my,dc=example,dc=com" AuthLDAPBindPassword "mypass" AuthLDAPUrl "ldap://my.example.com:389/ou=User Accounts,dc=my,dc=example,dc=com?sAMAccountName?sub?(objectClass=user)" NONE Require valid-user </Location> If I use the above configuration it continually prompts me with the Basic prompt and I have to eventually select Cancel, which returns a 401 (Authorization Required). If I comment out the bind parts it returns 500 (Internal Server Error), griping that authentication failed: [Mon Nov 02 12:00:00 2009] [warn] [client x.x.x.x] [10744] auth_ldap authenticate: user myuser authentication failed; URI /svn [ldap_search_ext_s() for user failed][Operations error] When I perform the bind using ldapsearch and filter for a simple attribute it returns correctly: ldapsearch -h my.example.com -p 389 -D "cn=userfoo,ou=Service Accounts,ou=User Accounts,dc=my,dc=example,dc=com" -b "ou=User Accounts,dc=my,dc=example,dc=com" -w - "&(objectClass=user)(cn=myuser)" sAMAccountName Unfortunately I have no control or insight into the AD part of the system, only the RHEL server. Does anyone know what the hang up is here?

  Read the article

• Error upgrading Ubuntu server from Intrepid to Jaunty

  - by Martin

  I'm trying to upgrade an old ubuntu server from 8.10 (Intrepid) to 9.04 (Jaunty). But it fails. root@server1:/# do-release-upgrade Checking for a new ubuntu release Failed Upgrade tool signature Failed Upgrade tool Done downloading extracting 'jaunty.tar.gz' Failed to extract Extracting the upgrade failed. There may be a problem with the network or with the server. Does anyone have an idea why I get this error and how to fix it? UPDATE: I think i might have tracked the problem down. My /etc/update-manager/meta-release looks like this: [METARELEASE] URI = http://changelogs.ubuntu.com/meta-release URI_LTS = http://changelogs.ubuntu.com/meta-release-lts URI_UNSTABLE_POSTFIX = -development URI_PROPOSED_POSTFIX = -proposed If i go to http://changelogs.ubuntu.com/meta-release it has this info for Jaunty: Dist: jaunty Name: Jaunty Jackalope Version: 9.04 Date: Thu, 23 Apr 2009 12:00:00 UTC Supported: 0 Description: This is the 9.04 release Release-File: http://archive.ubuntu.com/ubuntu/dists/jaunty/Release ReleaseNotes: http://changelogs.ubuntu.com/EOLReleaseAnnouncement UpgradeTool: http://archive.ubuntu.com/ubuntu/dists/jaunty-proposed/main/dist-upgrader-all/0.111.8/jaunty.tar.gz UpgradeToolSignature: http://archive.ubuntu.com/ubuntu/dists/jaunty-proposed/main/dist-upgrader-all/0.111.8/jaunty.tar.gz.gpg Those links starting with archive.ubuntu.com are broken since jaunty is EOL. I guess i could fix this by copying this file, replacing "archive" with "old-releases", host the modified file somewhere and change the url in the meta-release file. Is this a good solution or will it make me run into worse problems?

  Read the article

• Convert a cassette tape recording to digital format

  - by Electric Automation

  Has anyone been successful with transferring audio cassette tape recordings to a digital format? I would like to preserve old cassette tape recordings of my grandparents to some digital format: MP3, WAV, etc... The quality of the tapes are mediocre. I think I can handle the quality restoration but getting the audio from tape to digital is my question. Below is a list of the hardware that I can work with: Cassette Deck: I have a Technics stereo cassette deck model RS-B12. It has separate left and right IN and OUT RCA type jacks on the back. In the front it has a headphone phono jack, plus left and right mic input phono jacks. On the computer side: -I have a Windows Vista PC with no additional software other than what came with the machine from Costco. No sound editing software that I can see. There is no sound card on the PC. On the front panel there is a mini-phono mic input jack and there are several different types of in/out mini-phono jacks on the back. In addition, USB and Firewire. I also have access to a new (2009) iMac with a mini-phono input jack for a powered mic or other audio source and GarageBand that has come with the computer. In addition, USB and Firewire. What are my options for getting these cassette recordings into a digital format? Whats the best format? What sort of wires would I need and will I want to utilize the USB or Firewire or can I simply use the audio inputs on the PC (or Mac) to receive the audio stream?

  Read the article

• FFMPEG: how to add watermark to video?

  - by DocWiki

  My Platform: Ubuntu 10.10 + FFMPEG 0.5.3(I installed ffmpeg from source) I try to add Watermark to a .MOV video with FFMPEG 0.5.3 imlib2.so (Please note FFMPEG 0.6+ dont support imlib2.so, so I use ffmpeg 0.5.3) Here is my code: ffmpeg -sameq -i example.mov -vhook '/usr/local/lib/vhook/imlib2.so -x 0 -y 0 -i /var/www/files/watermark.png' newexample.mov Here is the output: FFmpeg version 0.5.3, Copyright (c) 2000-2009 Fabrice Bellard, et al. configuration: --enable-avfilter --enable-filter=movie --enable-avfilter-lavf libavutil 49.15. 0 / 49.15. 0 libavcodec 52.20. 1 / 52.20. 1 libavformat 52.31. 0 / 52.31. 0 libavdevice 52. 1. 0 / 52. 1. 0 libavfilter 0. 4. 0 / 0. 4. 0 built on Jul 3 2011 12:05:08, gcc: 4.4.5 Seems stream 1 codec frame rate differs from container frame rate: 59.94 (5994/100) - 29.97 (30000/1001) Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'example.mov': Duration: 00:03:14.06, start: 0.000000, bitrate: 3350 kb/s Stream #0.0(eng): Audio: aac, 48000 Hz, stereo, s16 Stream #0.1(eng): Video: h264, yuv420p, 1150x647, 29.97 tbr, 29.97 tbn, 59.94 tbc Output #0, mov, to 'newexample.mov': Stream #0.0(eng): Video: mpeg4, yuv420p, 1150x647, q=2-31, 200 kb/s, 90k tbn, 29.97 tbc Stream #0.1(eng): Audio: 0x0000, 48000 Hz, stereo, s16, 64 kb/s Stream mapping: Stream #0.1 - #0.0 Stream #0.0 - #0.1 Unsupported codec for output stream #0.1 What could be the possible problem? Is that AAC or H264 that is not supported? I installed libavcodec-extra-52, linfaac, libfaad and etc. but the error is the same. Do I have to install following this instruction? HOWTO: Install and use the latest FFmpeg and x264 or there is a simpler solution?

  Read the article

• Problems installing MySQL-python via yum / missing dependency / incompatibility problem?

  - by bs0

  I have come up against problems installing MySQL-python via yum. Our server is running Centos 5.5 and MySQL Version 5.1.45, Python-dev is installed. Yum complains about the missing dependency libmysqlclient_r.so.15: Missing Dependency: libmysqlclient_r.so.15()(64bit) is needed by package MySQL-python-1.2.1-1.x86_64 (base) The server is up to date and the packages mysql mysql-devel python-devel are installed. The missing dependency is nowhere on the system: locate libmysqlclient /usr/lib64/libmysqlclient.so /usr/lib64/libmysqlclient.so.15 /usr/lib64/libmysqlclient.so.16 /usr/lib64/libmysqlclient.so.16.0.0 /usr/lib64/libmysqlclient_r.so /usr/lib64/libmysqlclient_r.so.16 /usr/lib64/libmysqlclient_r.so.16.0.0 /usr/lib64/mysql/libmysqlclient.a /usr/lib64/mysql/libmysqlclient.la /usr/lib64/mysql/libmysqlclient.so /usr/lib64/mysql/libmysqlclient_r.a /usr/lib64/mysql/libmysqlclient_r.la /usr/lib64/mysql/libmysqlclient_r.so /usr/local/cpanel/lib64/libmysqlclient.so.14 rpm -qa | grep -i mysql MySQL-devel-5.1.45-0.glibc23 MySQL-bench-5.0.89-0.glibc23 MySQL-shared-5.1.45-0.glibc23 MySQL-server-5.1.45-0.glibc23 MySQL-test-5.1.45-0.glibc23 MySQL-client-5.1.45-0.glibc23 The Python version is python-2.4.3-27.el5.x86_64: Python 2.4.3 (#1, Sep 3 2009, 15:37:37) [GCC 4.1.2 20080704 (Red Hat 4.1.2-46)] on linux2 Any suggestions would be greatly appreciated.

  Read the article

• Xmodmap fails to remap modifier keys

  - by ZyX

  When I try to move keys, so that I have CapsLock on escape, Control on CapsLock and Escape on left control, I get the following error: % xmodmap ~/.Xmodmap X Error of failed request: BadValue (integer parameter out of range for operation) Major opcode of failed request: 118 (X_SetModifierMapping) Value in failed request: 0x17 Serial number of failed request: 15 Current serial number in output stream: 15 That is the code that fails: remove Lock = Caps_Lock ! ESC keycode 9 = Caps_Lock add Lock = Caps_Lock remove Control = Control_L ! CapsLock keycode 66 = Control_L add control = Control_L ! Control_R keycode 37 = Escape ! 2*Meta_L keycode 148 = Meta_L add mod1 = Meta_L If I comment out all lines that start with either add or remove it runs without any errors, but does not do what I want. Program versions (Gentoo x86 (stable)): xorg-server-1.7.6 xmodmap-1.0.4 xf86-input-evdev-2.3.2 Xorg.conf: # nvidia-xconfig: X configuration file generated by nvidia-xconfig # nvidia-xconfig: version 1.0 (buildmeister@builder63) Fri Aug 14 17:54:58 PDT 2009 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" InputDevice "Evdev Keyboard" "CoreKeyboard" InputDevice "Evdev Mouse" "CorePointer" EndSection Section "Module" Disable "dri" Disable "dri2" Disable "record" EndSection Section "InputDevice" Identifier "Evdev Keyboard" Driver "evdev" Option "Device" "/dev/input/event2" Option "CoreKeyboard" Option "AutoRepeat" "500 25" Option "XkbRules" "xorg" Option "xkb_rules" "xorg" Option "XkbModel" "yahoo" Option "xkb_model" "yahoo" Option "XkbLayout" "dvp2" # ,ru2 Option "xkb_layout" "dvp2" # ,ru2 # Option "XkbVariant" "" # ,winkeys Option "XkbOption" "grp_led:scroll,grp:rctrl_toggle,compose:rwin,grp:lwin_switch" # grp:lwin_switch EndSection Section "InputDevice" Identifier "Evdev Mouse" Driver "evdev" Option "CorePointer" Option "Device" "/dev/input/event3" Option "Name" "Genius Ergo Mouse" Option "HWHEELRelativeAxisButtons" "7 6" Option "WHEELRelativeAxizButtons" "4 5" Option "SendCoreEvents" "true" Option "Buttons" "11" EndSection Section "Files" FontPath "/usr/share/fonts/misc" FontPath "/usr/share/fonts/Type1" FontPath "/usr/share/fonts/100dpi" FontPath "/usr/share/fonts/75dpi" FontPath "/usr/share/fonts/terminus" # FontPath "/usr/share/fonts/intlfonts" FontPath "/usr/share/fonts/ttf-bitstream-vera" # FontPath "/usr/share/fonts/ttf" FontPath "/usr/share/fonts/corefonts" FontPath "/usr/share/fonts/paratype" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "Unknown" HorizSync 28.0 - 33.0 VertRefresh 43.0 - 72.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 SubSection "Display" Depth 24 EndSubSection EndSection Section "Extensions" Option "Composite" "Disable" EndSection Section "ServerFlags" # Option "XkbDisable" "false" # Option "AutoAddDevices" "false" Option "DontVTSwitch" "false" Option "DontZap" "false" # Option "DontZoom" "true" EndSection Everything worked before update.

  Read the article

< Previous Page | 62 63 64 65 66 67 68 69 70 71 72 73  | Next Page >