Search Results

Search found 1654 results on 67 pages for 'hack'.

Page 66/67 | < Previous Page | 62 63 64 65 66 67  | Next Page >

• Cascading S3 Sink Tap not being deleted with SinkMode.REPLACE

  - by Eric Charles

  We are running Cascading with a Sink Tap being configured to store in Amazon S3 and were facing some FileAlreadyExistsException (see [1]). This was only from time to time (1 time on around 100) and was not reproducable. Digging into the Cascading codem, we discovered the Hfs.deleteResource() is called (among others) by the BaseFlow.deleteSinksIfNotUpdate(). Btw, we were quite intrigued with the silent NPE (with comment "hack to get around npe thrown when fs reaches root directory"). From there, we extended the Hfs tap with our own Tap to add more action in the deleteResource() method (see [2]) with a retry mechanism calling directly the getFileSystem(conf).delete. The retry mechanism seemed to bring improvement, but we are still sometimes facing failures (see example in [3]): it sounds like HDFS returns isDeleted=true, but asking directly after if the folder exists, we receive exists=true, which should not happen. Logs also shows randomly isDeleted true or false when the flow succeeds, which sounds like the returned value is irrelevant or not to be trusted. Can anybody bring his own S3 experience with such a behavior: "folder should be deleted, but it is not"? We suspect a S3 issue, but could it also be in Cascading or HDFS? We run on Hadoop Cloudera-cdh3u5 and Cascading 2.0.1-wip-dev. [1] org.apache.hadoop.mapred.FileAlreadyExistsException: Output directory s3n://... already exists at org.apache.hadoop.mapreduce.lib.output.FileOutputFormat.checkOutputSpecs(FileOutputFormat.java:132) at com.twitter.elephantbird.mapred.output.DeprecatedOutputFormatWrapper.checkOutputSpecs(DeprecatedOutputFormatWrapper.java:75) at org.apache.hadoop.mapred.JobClient$2.run(JobClient.java:923) at org.apache.hadoop.mapred.JobClient$2.run(JobClient.java:882) at java.security.AccessController.doPrivileged(Native Method) at javax.security.auth.Subject.doAs(Subject.java:396) at org.apache.hadoop.security.UserGroupInformation.doAs(UserGroupInformation.java:1278) at org.apache.hadoop.mapred.JobClient.submitJobInternal(JobClient.java:882) at org.apache.hadoop.mapred.JobClient.submitJob(JobClient.java:856) at cascading.flow.hadoop.planner.HadoopFlowStepJob.internalNonBlockingStart(HadoopFlowStepJob.java:104) at cascading.flow.planner.FlowStepJob.blockOnJob(FlowStepJob.java:174) at cascading.flow.planner.FlowStepJob.start(FlowStepJob.java:137) at cascading.flow.planner.FlowStepJob.call(FlowStepJob.java:122) at cascading.flow.planner.FlowStepJob.call(FlowStepJob.java:42) at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303) at java.util.concurrent.FutureTask.run(FutureTask.java:138) at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886) at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908) at java.lang.Thread.run(Thread.j [2] @Override public boolean deleteResource(JobConf conf) throws IOException { LOGGER.info("Deleting resource {}", getIdentifier()); boolean isDeleted = super.deleteResource(conf); LOGGER.info("Hfs Sink Tap isDeleted is {} for {}", isDeleted, getIdentifier()); Path path = new Path(getIdentifier()); int retryCount = 0; int cumulativeSleepTime = 0; int sleepTime = 1000; while (getFileSystem(conf).exists(path)) { LOGGER .info( "Resource {} still exists, it should not... - I will continue to wait patiently...", getIdentifier()); try { LOGGER.info("Now I will sleep " + sleepTime / 1000 + " seconds while trying to delete {} - attempt: {}", getIdentifier(), retryCount + 1); Thread.sleep(sleepTime); cumulativeSleepTime += sleepTime; sleepTime *= 2; } catch (InterruptedException e) { e.printStackTrace(); LOGGER .error( "Interrupted while sleeping trying to delete {} with message {}...", getIdentifier(), e.getMessage()); throw new RuntimeException(e); } if (retryCount == 0) { getFileSystem(conf).delete(getPath(), true); } retryCount++; if (cumulativeSleepTime > MAXIMUM_TIME_TO_WAIT_TO_DELETE_MS) { break; } } if (getFileSystem(conf).exists(path)) { LOGGER .error( "We didn't succeed to delete the resource {}. Throwing now a runtime exception.", getIdentifier()); throw new RuntimeException( "Although we waited to delete the resource for " + getIdentifier() + ' ' + retryCount + " iterations, it still exists - This must be an issue in the underlying storage system."); } return isDeleted; } [3] INFO [pool-2-thread-15] (BaseFlow.java:1287) - [...] at least one sink is marked for delete INFO [pool-2-thread-15] (BaseFlow.java:1287) - [...] sink oldest modified date: Wed Dec 31 23:59:59 UTC 1969 INFO [pool-2-thread-15] (HiveSinkTap.java:148) - Now I will sleep 1 seconds while trying to delete s3n://... - attempt: 1 INFO [pool-2-thread-15] (HiveSinkTap.java:130) - Deleting resource s3n://... INFO [pool-2-thread-15] (HiveSinkTap.java:133) - Hfs Sink Tap isDeleted is true for s3n://... ERROR [pool-2-thread-15] (HiveSinkTap.java:175) - We didn't succeed to delete the resource s3n://... Throwing now a runtime exception. WARN [pool-2-thread-15] (Cascade.java:706) - [...] flow failed: ... java.lang.RuntimeException: Although we waited to delete the resource for s3n://... 0 iterations, it still exists - This must be an issue in the underlying storage system. at com.qubit.hive.tap.HiveSinkTap.deleteResource(HiveSinkTap.java:179) at com.qubit.hive.tap.HiveSinkTap.deleteResource(HiveSinkTap.java:40) at cascading.flow.BaseFlow.deleteSinksIfNotUpdate(BaseFlow.java:971) at cascading.flow.BaseFlow.prepare(BaseFlow.java:733) at cascading.cascade.Cascade$CascadeJob.call(Cascade.java:761) at cascading.cascade.Cascade$CascadeJob.call(Cascade.java:710) at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303) at java.util.concurrent.FutureTask.run(FutureTask.java:138) at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886) at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908) at java.lang.Thread.run(Thread.java:619)

  Read the article

• Why this code is not working on linux server ?

  - by user488001

  Hello Experts, I am new in Zend Framework, and this code is use for downloading contents. This code is working in localhost but when i tried to execute in linux server it shows error file not found. public function downloadAnnouncementsAction() { $file= $this-_getParam('file'); $file = str_replace("%2F","/",$this-_getParam('file')); // Allow direct file download (hotlinking)? // Empty - allow hotlinking // If set to nonempty value (Example: example.com) will only allow downloads when referrer contains this text define('ALLOWED_REFERRER', ''); // Download folder, i.e. folder where you keep all files for download. // MUST end with slash (i.e. "/" ) define('BASE_DIR','file_upload'); // log downloads? true/false define('LOG_DOWNLOADS',true); // log file name define('LOG_FILE','downloads.log'); // Allowed extensions list in format 'extension' => 'mime type' // If myme type is set to empty string then script will try to detect mime type // itself, which would only work if you have Mimetype or Fileinfo extensions // installed on server. $allowed_ext = array ( // audio 'mp3' => 'audio/mpeg', 'wav' => 'audio/x-wav', // video 'mpeg' => 'video/mpeg', 'mpg' => 'video/mpeg', 'mpe' => 'video/mpeg', 'mov' => 'video/quicktime', 'avi' => 'video/x-msvideo' ); // If hotlinking not allowed then make hackers think there are some server problems if (ALLOWED_REFERRER !== '' && (!isset($_SERVER['HTTP_REFERER']) || strpos(strtoupper($_SERVER['HTTP_REFERER']),strtoupper(ALLOWED_REFERRER)) === false) ) { die("Internal server error. Please contact system administrator."); } // Make sure program execution doesn't time out // Set maximum script execution time in seconds (0 means no limit) set_time_limit(0); if (!isset($file) || empty($file)) { die("Please specify file name for download."); } // Nullbyte hack fix if (strpos($file, "\0") !== FALSE) die(''); // Get real file name. // Remove any path info to avoid hacking by adding relative path, etc. $fname = basename($file); // Check if the file exists // Check in subfolders too function find_file ($dirname, $fname, &$file_path) { $dir = opendir($dirname); while ($file = readdir($dir)) { if (empty($file_path) && $file != '.' && $file != '..') { if (is_dir($dirname.'/'.$file)) { find_file($dirname.'/'.$file, $fname, $file_path); } else { if (file_exists($dirname.'/'.$fname)) { $file_path = $dirname.'/'.$fname; return; } } } } } // find_file // get full file path (including subfolders) $file_path = ''; find_file(BASE_DIR, $fname, $file_path); if (!is_file($file_path)) { die("File does not exist. Make sure you specified correct file name."); } // file size in bytes $fsize = filesize($file_path); // file extension $fext = strtolower(substr(strrchr($fname,"."),1)); // check if allowed extension if (!array_key_exists($fext, $allowed_ext)) { die("Not allowed file type."); } // get mime type if ($allowed_ext[$fext] == '') { $mtype = ''; // mime type is not set, get from server settings if (function_exists('mime_content_type')) { $mtype = mime_content_type($file_path); } else if (function_exists('finfo_file')) { $finfo = finfo_open(FILEINFO_MIME); // return mime type $mtype = finfo_file($finfo, $file_path); finfo_close($finfo); } if ($mtype == '') { $mtype = "application/force-download"; } } else { // get mime type defined by admin $mtype = $allowed_ext[$fext]; } // Browser will try to save file with this filename, regardless original filename. // You can override it if needed. if (!isset($_GET['fc']) || empty($_GET['fc'])) { $asfname = $fname; } else { // remove some bad chars $asfname = str_replace(array('"',"'",'\\','/'), '', $_GET['fc']); if ($asfname === '') $asfname = 'NoName'; } // set headers header("Pragma: public"); header("Expires: 0"); header("Cache-Control: must-revalidate, post-check=0, pre-check=0"); header("Cache-Control: public"); header("Content-Description: File Transfer"); header("Content-Type: $mtype"); header("Content-Disposition: attachment; filename=\"$asfname\""); header("Content-Transfer-Encoding: binary"); header("Content-Length: " . $fsize); // download // @readfile($file_path); $file = @fopen($file_path,"rb"); if ($file) { while(!feof($file)) { print(fread($file, 1024*8)); flush(); if (connection_status()!=0) { @fclose($file); die(); } } @fclose($file); } // log downloads if (!LOG_DOWNLOADS) die(); $f = @fopen(LOG_FILE, 'a+'); if ($f) { @fputs($f, date("m.d.Y g:ia")." ".$_SERVER['REMOTE_ADDR']." ".$fname."\n"); @fclose($f); } } please Help...

  Read the article

• Expand <div> tag to bottom of page with CSS

  - by typoknig

  Hi all, I know this question gets asked a lot because I have looked at many "solutions" trying to get this to work for me. I can get it to work if I hack up the html but I want to use all CSS. All I want is a header with two columns below it, and I want these three items to fill the entire page/screen, and I want to do it with CSS and without frames or tables. The XAMPP user interface looks exactly how I want my page to look, but again, I do not want to use frames. I cannot get the two orangeish colored columns to extend to the bottom of the screen. I do have it so it looks like the right column extends to the bottom of the screen just by changing the body background color to the same color as the background color of the right column, but I would like both columns to extend to the bottom so I didn't have to do that. Here is what I have so far: HTML <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html dir="ltr" xmlns="http://www.w3.org/1999/xhtml"> <head> <title>MY SITE</title> <meta content="text/html; charset=utf-8" http-equiv="Content-Type" /> <link href="stylesheet.css" rel="stylesheet" type="text/css" /> </head> <body> <div id="container"> <div id="masthead"> MY SITE</div> <div id="left_col"> Employee Management<br /> <a href="Employee%20Management.php">Add New Employee</a><br /> <a href="Employee%20Management.php">Edit Existing Employee</a><br /> <br/> Load Management<br /> <a href="Load%20Management.php">Log New Load</a><br /> <a href="Load%20Management.php">Edit Existing Load</a><br /> <br/> Report Management<br /> <a href="Report%20Management.php">Employee Report</a><br /> <a href="Report%20Management.php">Load Report</a></div> <div id="page_content"> <div id="page_content_heading">Welcome!</div> Lots of words</div> </div> </body> </html> CSS #masthead { background-color:#FFFFFF; font-family:Arial,Helvetica,sans-serif; font-size:xx-large; font-weight:bold; padding:30px; text-align:center; } #container { min-width: 600px; min-height: 100%; } #left_col { padding: 10px; background-color: #339933; float: left; font-family: Arial,Helvetica,sans-serif; font-size: large; font-weight: bold; width: 210px; } #page_content { background-color: #CCCCCC; margin-left: 230px; padding: 20px; } #page_content_heading { font-family:Arial,Helvetica,sans-serif; font-size:large; font-weight:bold; padding-bottom:10px; padding-top:10px; } a { color:#0000FF; font-family:Arial,Helvetica,sans-serif; font-size:medium; font-weight:normal; } a:hover { color:#FF0000; } html, body { height: 100%; padding: 0; margin: 0; background-color: #CCCCCC; }

  Read the article

• Another "Windows 7 entry missing from Grub2" Question

  - by 4x10

  Like many before me had the following problem that after installing Ubuntu (with windows 7 already installed), the grub boot loader wouldnt show windows 7 as a boot option, though i can boot fine if I use the "Choose Boot Device" options on the x220. The difference is that I try using UEFI only so many answers didn't really fit my problem, though i tried several stuffs: after running boot repair it destroyed the ubuntu boot loader custom entry in /etc/grub.d/40_custom for windows which doesnt show up many update-grub and reboots trying windows repair recovery thing while being there i also did bootrec.exe /FixBoot and update-grub and reboot again and finaly because it was so much fun, i installed linux all over again, while formatting and deleting everything linux related before that. Now that i think of it, Ubuntu also didn't notice Windows being there during the Setup and it still doesnt according to the Boot Info from Boot Repair. Boot Info Script 0.61-git-patched [23 April 2012] ============================= Boot Info Summary: =============================== => No boot loader is installed in the MBR of /dev/sda. sda1: __________________________________________________________________________ File system: vfat Boot sector type: Windows 7: FAT32 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: /efi/Boot/bootx64.efi /efi/ubuntu/grubx64.efi sda2: __________________________________________________________________________ File system: Boot sector type: - Boot sector info: Mounting failed: mount: unknown filesystem type '' sda3: __________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Windows 7 Boot files: /Windows/System32/winload.exe sda4: __________________________________________________________________________ File system: ext4 Boot sector type: - Boot sector info: Operating System: Ubuntu precise (development branch) Boot files: /boot/grub/grub.cfg /etc/fstab sda5: __________________________________________________________________________ File system: ext4 Boot sector type: - Boot sector info: Operating System: Boot files: sda6: __________________________________________________________________________ File system: swap Boot sector type: - Boot sector info: ============================ Drive/Partition Info: ============================= Drive: sda _____________________________________________________________________ Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sda1 1 625,142,447 625,142,447 ee GPT GUID Partition Table detected. Partition Start Sector End Sector # of Sectors System /dev/sda1 2,048 206,847 204,800 EFI System partition /dev/sda2 206,848 468,991 262,144 Microsoft Reserved Partition (Windows) /dev/sda3 468,992 170,338,303 169,869,312 Data partition (Windows/Linux) /dev/sda4 170,338,304 330,338,304 160,000,001 Data partition (Windows/Linux) /dev/sda5 330,338,305 617,141,039 286,802,735 Data partition (Windows/Linux) /dev/sda6 617,141,040 625,141,040 8,000,001 Swap partition (Linux) "blkid" output: ________________________________________________________________ Device UUID TYPE LABEL /dev/sda1 885C-ED1B vfat /dev/sda3 EE06CC0506CBCCB1 ntfs /dev/sda4 604dd3b2-64ca-4200-b8fb-820e8d0ca899 ext4 /dev/sda5 d62515fd-8120-4a74-b17b-0bdf244124a3 ext4 /dev/sda6 7078b649-fb2a-4c59-bd03-fd31ef440d37 swap ================================ Mount points: ================================= Device Mount_Point Type Options /dev/sda1 /boot/efi vfat (rw) /dev/sda4 / ext4 (rw,errors=remount-ro) /dev/sda5 /home ext4 (rw) =========================== sda4/boot/grub/grub.cfg: =========================== -------------------------------------------------------------------------------- # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi set default="0" if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { insmod efi_gop insmod efi_uga insmod video_bochs insmod video_cirrus } insmod part_gpt insmod ext2 set root='(hd0,gpt4)' search --no-floppy --fs-uuid --set=root 604dd3b2-64ca-4200-b8fb-820e8d0ca899 if loadfont /usr/share/grub/unicode.pf2 ; then set gfxmode=auto load_video insmod gfxterm insmod part_gpt insmod ext2 set root='(hd0,gpt4)' search --no-floppy --fs-uuid --set=root 604dd3b2-64ca-4200-b8fb-820e8d0ca899 set locale_dir=($root)/boot/grub/locale set lang=en_US insmod gettext fi terminal_output gfxterm if [ "${recordfail}" = 1 ]; then set timeout=-1 else set timeout=10 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray if background_color 44,0,30; then clear fi ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### function gfxmode { set gfxpayload="$1" if [ "$1" = "keep" ]; then set vt_handoff=vt.handoff=7 else set vt_handoff= fi } if [ ${recordfail} != 1 ]; then if [ -e ${prefix}/gfxblacklist.txt ]; then if hwmatch ${prefix}/gfxblacklist.txt 3; then if [ ${match} = 0 ]; then set linux_gfx_mode=keep else set linux_gfx_mode=text fi else set linux_gfx_mode=text fi else set linux_gfx_mode=keep fi else set linux_gfx_mode=text fi export linux_gfx_mode if [ "$linux_gfx_mode" != "text" ]; then load_video; fi menuentry 'Ubuntu, with Linux 3.2.0-20-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_gpt insmod ext2 set root='(hd0,gpt4)' search --no-floppy --fs-uuid --set=root 604dd3b2-64ca-4200-b8fb-820e8d0ca899 linux /boot/vmlinuz-3.2.0-20-generic root=UUID=604dd3b2-64ca-4200-b8fb-820e8d0ca899 ro quiet splash $vt_handoff initrd /boot/initrd.img-3.2.0-20-generic } menuentry 'Ubuntu, with Linux 3.2.0-20-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod gzio insmod part_gpt insmod ext2 set root='(hd0,gpt4)' search --no-floppy --fs-uuid --set=root 604dd3b2-64ca-4200-b8fb-820e8d0ca899 echo 'Loading Linux 3.2.0-20-generic ...' linux /boot/vmlinuz-3.2.0-20-generic root=UUID=604dd3b2-64ca-4200-b8fb-820e8d0ca899 ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.2.0-20-generic } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod part_gpt insmod ext2 set root='(hd0,gpt4)' search --no-floppy --fs-uuid --set=root 604dd3b2-64ca-4200-b8fb-820e8d0ca899 linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod part_gpt insmod ext2 set root='(hd0,gpt4)' search --no-floppy --fs-uuid --set=root 604dd3b2-64ca-4200-b8fb-820e8d0ca899 linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### -------------------------------------------------------------------------------- =============================== sda4/etc/fstab: ================================ -------------------------------------------------------------------------------- # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda4 during installation UUID=604dd3b2-64ca-4200-b8fb-820e8d0ca899 / ext4 errors=remount-ro 0 1 # /boot/efi was on /dev/sda1 during installation UUID=885C-ED1B /boot/efi vfat defaults 0 1 # /home was on /dev/sda5 during installation UUID=d62515fd-8120-4a74-b17b-0bdf244124a3 /home ext4 defaults 0 2 # swap was on /dev/sda6 during installation UUID=7078b649-fb2a-4c59-bd03-fd31ef440d37 none swap sw 0 0 -------------------------------------------------------------------------------- =================== sda4: Location of files loaded by Grub: ==================== GiB - GB File Fragment(s) 129.422874451 = 138.966753280 boot/grub/grub.cfg 1 83.059570312 = 89.184534528 boot/initrd.img-3.2.0-20-generic 2 101.393131256 = 108.870045696 boot/vmlinuz-3.2.0-20-generic 1 83.059570312 = 89.184534528 initrd.img 2 101.393131256 = 108.870045696 vmlinuz 1 ADDITIONAL INFORMATION : =================== log of boot-repair 2012-04-25__23h40 =================== boot-repair version : 3.18-0ppa3~precise boot-sav version : 3.18-0ppa4~precise glade2script version : 0.3.2.1-0ppa7~precise internet: connected python-software-properties version : 0.82.7 0 upgraded, 0 newly installed, 1 reinstalled, 0 to remove and 591 not upgraded. dpkg-preconfigure: unable to re-open stdin: No such file or directory boot-repair is executed in installed-session (Ubuntu precise (development branch) , precise , Ubuntu , x86_64) WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. =================== OSPROBER: /dev/sda4:The OS now in use - Ubuntu precise (development branch) CurrentSession:linux =================== BLKID: /dev/sda3: UUID="EE06CC0506CBCCB1" TYPE="ntfs" /dev/sda1: UUID="885C-ED1B" TYPE="vfat" /dev/sda4: UUID="604dd3b2-64ca-4200-b8fb-820e8d0ca899" TYPE="ext4" /dev/sda5: UUID="d62515fd-8120-4a74-b17b-0bdf244124a3" TYPE="ext4" /dev/sda6: UUID="7078b649-fb2a-4c59-bd03-fd31ef440d37" TYPE="swap" 1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS. WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util sfdisk doesn't support GPT. Use GNU Parted. =================== /etc/default/grub : # If you change this file, run 'update-grub' afterwards to update # /boot/grub/grub.cfg. # For full documentation of the options in this file, see: # info -f grub -n 'Simple configuration' GRUB_DEFAULT=0 #GRUB_HIDDEN_TIMEOUT=0 #GRUB_HIDDEN_TIMEOUT_QUIET=true GRUB_TIMEOUT=10 GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian` GRUB_CMDLINE_LINUX_DEFAULT="quiet splash" GRUB_CMDLINE_LINUX="" # Uncomment to enable BadRAM filtering, modify to suit your needs # This works with Linux (no patch required) and with any kernel that obtains # the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...) #GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef" # Uncomment to disable graphical terminal (grub-pc only) #GRUB_TERMINAL=console # The resolution used on graphical terminal # note that you can use only modes which your graphic card supports via VBE # you can see them in real GRUB with the command `vbeinfo' #GRUB_GFXMODE=640x480 # Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux #GRUB_DISABLE_LINUX_UUID=true # Uncomment to disable generation of recovery mode menu entries #GRUB_DISABLE_RECOVERY="true" # Uncomment to get a beep at grub start #GRUB_INIT_TUNE="480 440 1" EFI_OF_PART[1] (, ) =================== dmesg | grep EFI : [ 0.000000] EFI v2.00 by Lenovo [ 0.000000] Kernel-defined memdesc doesn't match the one from EFI! [ 0.000000] EFI: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000001000) (0MB) [ 0.000000] EFI: mem01: type=7, attr=0xf, range=[0x0000000000001000-0x000000000004e000) (0MB) [ 0.000000] EFI: mem02: type=3, attr=0xf, range=[0x000000000004e000-0x0000000000058000) (0MB) [ 0.000000] EFI: mem03: type=10, attr=0xf, range=[0x0000000000058000-0x0000000000059000) (0MB) [ 0.000000] EFI: mem04: type=7, attr=0xf, range=[0x0000000000059000-0x000000000005e000) (0MB) [ 0.000000] EFI: mem05: type=4, attr=0xf, range=[0x000000000005e000-0x000000000005f000) (0MB) [ 0.000000] EFI: mem06: type=3, attr=0xf, range=[0x000000000005f000-0x00000000000a0000) (0MB) [ 0.000000] EFI: mem07: type=2, attr=0xf, range=[0x0000000000100000-0x00000000005b9000) (4MB) [ 0.000000] EFI: mem08: type=7, attr=0xf, range=[0x00000000005b9000-0x0000000020000000) (506MB) [ 0.000000] EFI: mem09: type=0, attr=0xf, range=[0x0000000020000000-0x0000000020200000) (2MB) [ 0.000000] EFI: mem10: type=7, attr=0xf, range=[0x0000000020200000-0x00000000364e4000) (354MB) [ 0.000000] EFI: mem11: type=2, attr=0xf, range=[0x00000000364e4000-0x000000003726a000) (13MB) [ 0.000000] EFI: mem12: type=7, attr=0xf, range=[0x000000003726a000-0x0000000040000000) (141MB) [ 0.000000] EFI: mem13: type=0, attr=0xf, range=[0x0000000040000000-0x0000000040200000) (2MB) [ 0.000000] EFI: mem14: type=7, attr=0xf, range=[0x0000000040200000-0x000000009df35000) (1501MB) [ 0.000000] EFI: mem15: type=2, attr=0xf, range=[0x000000009df35000-0x00000000d39a0000) (858MB) [ 0.000000] EFI: mem16: type=4, attr=0xf, range=[0x00000000d39a0000-0x00000000d39c0000) (0MB) [ 0.000000] EFI: mem17: type=7, attr=0xf, range=[0x00000000d39c0000-0x00000000d5df5000) (36MB) [ 0.000000] EFI: mem18: type=4, attr=0xf, range=[0x00000000d5df5000-0x00000000d6990000) (11MB) [ 0.000000] EFI: mem19: type=7, attr=0xf, range=[0x00000000d6990000-0x00000000d6b82000) (1MB) [ 0.000000] EFI: mem20: type=1, attr=0xf, range=[0x00000000d6b82000-0x00000000d6b9f000) (0MB) [ 0.000000] EFI: mem21: type=7, attr=0xf, range=[0x00000000d6b9f000-0x00000000d77b0000) (12MB) [ 0.000000] EFI: mem22: type=4, attr=0xf, range=[0x00000000d77b0000-0x00000000d780a000) (0MB) [ 0.000000] EFI: mem23: type=7, attr=0xf, range=[0x00000000d780a000-0x00000000d7826000) (0MB) [ 0.000000] EFI: mem24: type=4, attr=0xf, range=[0x00000000d7826000-0x00000000d7868000) (0MB) [ 0.000000] EFI: mem25: type=7, attr=0xf, range=[0x00000000d7868000-0x00000000d7869000) (0MB) [ 0.000000] EFI: mem26: type=4, attr=0xf, range=[0x00000000d7869000-0x00000000d786a000) (0MB) [ 0.000000] EFI: mem27: type=7, attr=0xf, range=[0x00000000d786a000-0x00000000d786b000) (0MB) [ 0.000000] EFI: mem28: type=4, attr=0xf, range=[0x00000000d786b000-0x00000000d786c000) (0MB) [ 0.000000] EFI: mem29: type=7, attr=0xf, range=[0x00000000d786c000-0x00000000d786d000) (0MB) [ 0.000000] EFI: mem30: type=4, attr=0xf, range=[0x00000000d786d000-0x00000000d825f000) (9MB) [ 0.000000] EFI: mem31: type=7, attr=0xf, range=[0x00000000d825f000-0x00000000d8261000) (0MB) [ 0.000000] EFI: mem32: type=4, attr=0xf, range=[0x00000000d8261000-0x00000000d82f7000) (0MB) [ 0.000000] EFI: mem33: type=7, attr=0xf, range=[0x00000000d82f7000-0x00000000d82f8000) (0MB) [ 0.000000] EFI: mem34: type=4, attr=0xf, range=[0x00000000d82f8000-0x00000000d8705000) (4MB) [ 0.000000] EFI: mem35: type=7, attr=0xf, range=[0x00000000d8705000-0x00000000d8706000) (0MB) [ 0.000000] EFI: mem36: type=4, attr=0xf, range=[0x00000000d8706000-0x00000000d8761000) (0MB) [ 0.000000] EFI: mem37: type=7, attr=0xf, range=[0x00000000d8761000-0x00000000d8768000) (0MB) [ 0.000000] EFI: mem38: type=4, attr=0xf, range=[0x00000000d8768000-0x00000000d9b9f000) (20MB) [ 0.000000] EFI: mem39: type=7, attr=0xf, range=[0x00000000d9b9f000-0x00000000d9e4c000) (2MB) [ 0.000000] EFI: mem40: type=2, attr=0xf, range=[0x00000000d9e4c000-0x00000000d9e52000) (0MB) [ 0.000000] EFI: mem41: type=3, attr=0xf, range=[0x00000000d9e52000-0x00000000da59f000) (7MB) [ 0.000000] EFI: mem42: type=5, attr=0x800000000000000f, range=[0x00000000da59f000-0x00000000da6c3000) (1MB) [ 0.000000] EFI: mem43: type=5, attr=0x800000000000000f, range=[0x00000000da6c3000-0x00000000da79f000) (0MB) [ 0.000000] EFI: mem44: type=6, attr=0x800000000000000f, range=[0x00000000da79f000-0x00000000da8b1000) (1MB) [ 0.000000] EFI: mem45: type=6, attr=0x800000000000000f, range=[0x00000000da8b1000-0x00000000da99f000) (0MB) [ 0.000000] EFI: mem46: type=0, attr=0xf, range=[0x00000000da99f000-0x00000000daa22000) (0MB) [ 0.000000] EFI: mem47: type=0, attr=0xf, range=[0x00000000daa22000-0x00000000daa9b000) (0MB) [ 0.000000] EFI: mem48: type=0, attr=0xf, range=[0x00000000daa9b000-0x00000000daa9c000) (0MB) [ 0.000000] EFI: mem49: type=0, attr=0xf, range=[0x00000000daa9c000-0x00000000daa9f000) (0MB) [ 0.000000] EFI: mem50: type=10, attr=0xf, range=[0x00000000daa9f000-0x00000000daadd000) (0MB) [ 0.000000] EFI: mem51: type=10, attr=0xf, range=[0x00000000daadd000-0x00000000dab9f000) (0MB) [ 0.000000] EFI: mem52: type=9, attr=0xf, range=[0x00000000dab9f000-0x00000000dabdc000) (0MB) [ 0.000000] EFI: mem53: type=9, attr=0xf, range=[0x00000000dabdc000-0x00000000dabff000) (0MB) [ 0.000000] EFI: mem54: type=4, attr=0xf, range=[0x00000000dabff000-0x00000000dac00000) (0MB) [ 0.000000] EFI: mem55: type=7, attr=0xf, range=[0x0000000100000000-0x000000021e600000) (4582MB) [ 0.000000] EFI: mem56: type=11, attr=0x8000000000000001, range=[0x00000000f80f8000-0x00000000f80f9000) (0MB) [ 0.000000] EFI: mem57: type=11, attr=0x8000000000000001, range=[0x00000000fed1c000-0x00000000fed20000) (0MB) [ 0.000000] ACPI: UEFI 00000000dabde000 0003E (v01 LENOVO TP-8D 00001280 PTL 00000002) [ 0.000000] ACPI: UEFI 00000000dabdd000 00042 (v01 PTL COMBUF 00000001 PTL 00000001) [ 0.000000] ACPI: UEFI 00000000dabdc000 00292 (v01 LENOVO TP-8D 00001280 PTL 00000002) [ 0.795807] fb0: EFI VGA frame buffer device [ 1.057243] EFI Variables Facility v0.08 2004-May-17 [ 9.122104] fb: conflicting fb hw usage inteldrmfb vs EFI VGA - removing generic driver ReadEFI: /dev/sda , N 128 , 0 , , PRStart 1024 , PRSize 128 WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. =================== PARTITIONS & DISKS: sda4 : sda, not-sepboot, grubenv-ok grub2, grub-efi, update-grub, 64, with-boot, is-os, gpt-but-not-EFI, fstab-has-bad-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, no-grldr, no-b-bcd, apt-get, grub-install, . sda3 : sda, maybesepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, gpt-but-not-EFI, part-has-no-fstab, no-nt, haswinload, no-recov-nor-hid, no-bmgr, no-grldr, no-b-bcd, nopakmgr, nogrubinstall, /mnt/boot-sav/sda3. sda1 : sda, maybesepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, is-correct-EFI, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, no-grldr, no-b-bcd, nopakmgr, nogrubinstall, /boot/efi. sda5 : sda, maybesepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, gpt-but-not-EFI, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, no-grldr, no-b-bcd, nopakmgr, nogrubinstall, /home. sda : GPT-BIS, GPT, no-BIOS_boot, has-correctEFI, 2048 sectors * 512 bytes =================== PARTED: Model: ATA HITACHI HTS72323 (scsi) Disk /dev/sda: 320GB Sector size (logical/physical): 512B/512B Partition Table: gpt Number Start End Size File system Name Flags 1 1049kB 106MB 105MB fat32 EFI system partition boot 2 106MB 240MB 134MB Microsoft reserved partition msftres 3 240MB 87.2GB 87.0GB ntfs Basic data partition 4 87.2GB 169GB 81.9GB ext4 5 169GB 316GB 147GB ext4 6 316GB 320GB 4096MB linux-swap(v1) =================== MOUNT: /dev/sda4 on / type ext4 (rw,errors=remount-ro) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /sys type sysfs (rw,noexec,nosuid,nodev) none on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) udev on /dev type devtmpfs (rw,mode=0755) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755) none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880) none on /run/shm type tmpfs (rw,nosuid,nodev) /dev/sda1 on /boot/efi type vfat (rw) /dev/sda5 on /home type ext4 (rw) gvfs-fuse-daemon on /home/vierlex/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=vierlex) /dev/sda3 on /mnt/boot-sav/sda3 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096) /sys/block/sda: alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 sda3 sda4 sda5 sda6 size slaves stat subsystem trace uevent /dev: agpgart autofs block bsg btrfs-control bus char console core cpu cpu_dma_latency disk dri ecryptfs fb0 fd full fuse hpet input kmsg log mapper mcelog mei mem net network_latency network_throughput null oldmem port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda3 sda4 sda5 sda6 sg0 shm snapshot snd stderr stdin stdout tpm0 uinput urandom usbmon0 usbmon1 usbmon2 v4l vga_arbiter video0 watchdog zero /dev/mapper: control /boot/efi: EFI /boot/efi/EFI: Boot Microsoft ubuntu /boot/efi/efi: Boot Microsoft ubuntu /boot/efi/efi/Boot: bootx64.efi /boot/efi/efi/ubuntu: grubx64.efi WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. =================== DF: Filesystem Type Size Used Avail Use% Mounted on /dev/sda4 ext4 77G 4.1G 69G 6% / udev devtmpfs 3.9G 12K 3.9G 1% /dev tmpfs tmpfs 1.6G 864K 1.6G 1% /run none tmpfs 5.0M 0 5.0M 0% /run/lock none tmpfs 3.9G 152K 3.9G 1% /run/shm /dev/sda1 vfat 96M 18M 79M 19% /boot/efi /dev/sda5 ext4 137G 2.2G 128G 2% /home /dev/sda3 fuseblk 81G 30G 52G 37% /mnt/boot-sav/sda3 =================== FDISK: Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xf34fe538 Device Boot Start End Blocks Id System /dev/sda1 1 625142447 312571223+ ee GPT =================== Before mainwindow FSCK no PASTEBIN yes WUBI no WINBOOT yes recommendedrepair, purge, QTY_OF_PART_FOR_REINSTAL 1 no-kernel-purge UNHIDEBOOT_ACTION yes (10s), noflag () PART_TO_REINSTALL_GRUB sda4, FORCE_GRUB no (sda) REMOVABLEDISK no USE_SEPARATEBOOTPART no (sda3) grub2 () UNCOMMENT_GFXMODE no ATA ADD_KERNEL_OPTION no (acpi=off) MBR_TO_RESTORE ( ) EFI detected. Please check the options. =================== Actions FSCK no PASTEBIN yes WUBI no WINBOOT no bootinfo, nombraction, QTY_OF_PART_FOR_REINSTAL 1 no-kernel-purge UNHIDEBOOT_ACTION no (10s), noflag () PART_TO_REINSTALL_GRUB sda4, FORCE_GRUB no (sda) REMOVABLEDISK no USE_SEPARATEBOOTPART no (sda3) grub2 () UNCOMMENT_GFXMODE no ATA ADD_KERNEL_OPTION no (acpi=off) MBR_TO_RESTORE ( ) No change has been performed on your computer. See you soon! internet: connected Thanks for your time and attention. EDIT: additional Info Request =No boot loader is installed in the MBR of /dev/sda. But maybe this is how it is supposed to work? yea this is ok. boot stuff seems to be on a seperate partition, in my case sda1. I'm very new to this UEFI thing too. missing files like bootmgr i don't really have a clue :D but yea, maybe thats how it suppose to be? Instead and whats not shown in the log for some reason: There is additional microsoft bootfiles on sda1 under /efi/microsoft/ [much stuff] I remember also doing some kind of hack to make a UEFI windows 7 usb stick. http://jake.io/b/2011/installing-windows-7-with-uefi-boot-on-an-x220-from-usb/ In short: creating and placing bootx64.efi on the stick so it can be booted in UEFI mode. boot order i decide that in my BIOS. i read somwhere that the thinkpad x220 (essential part of the serial number: 4921 http://www.lenovo.com/shop/americas/content/user_guides/x220_x220i_x220tablet_x220itablet_ug_en.pdf) doesnt really have UEFI interface or something, still, these 2 options are listed with all the other usual devices you can give a boot priority to. Right now it looks like this: Boot Priority Order 1. ubuntu 2. Windows Boot Manager 3. USB FDD 4. USB HDD 5. ATA HDD0 HITACHI [random string]

  Read the article

• Creating STA COM compatible ASP.NET Applications

  - by Rick Strahl

  When building ASP.NET applications that interface with old school COM objects like those created with VB6 or Visual FoxPro (MTDLL), it's extremely important that the threads that are serving requests use Single Threaded Apartment Threading. STA is a COM built-in technology that allows essentially single threaded components to operate reliably in a multi-threaded environment. STA's guarantee that COM objects instantiated on a specific thread stay on that specific thread and any access to a COM object from another thread automatically marshals that thread to the STA thread. The end effect is that you can have multiple threads, but a COM object instance lives on a fixed never changing thread. ASP.NET by default uses MTA (multi-threaded apartment) threads which are truly free spinning threads that pay no heed to COM object marshaling. This is vastly more efficient than STA threading which has a bit of overhead in determining whether it's OK to run code on a given thread or whether some sort of thread/COM marshaling needs to occur. MTA COM components can be very efficient, but STA COM components in a multi-threaded environment always tend to have a fair amount of overhead. It's amazing how much COM Interop I still see today so while it seems really old school to be talking about this topic, it's actually quite apropos for me as I have many customers using legacy COM systems that need to interface with other .NET applications. In this post I'm consolidating some of the hacks I've used to integrate with various ASP.NET technologies when using STA COM Components. STA in ASP.NET Support for STA threading in the ASP.NET framework is fairly limited. Specifically only the original ASP.NET WebForms technology supports STA threading directly via its STA Page Handler implementation or what you might know as ASPCOMPAT mode. For WebForms running STA components is as easy as specifying the ASPCOMPAT attribute in the @Page tag:<%@ Page Language="C#" AspCompat="true" %> which runs the page in STA mode. Removing it runs in MTA mode. Simple. Unfortunately all other ASP.NET technologies built on top of the core ASP.NET engine do not support STA natively. So if you want to use STA COM components in MVC or with class ASMX Web Services, there's no automatic way like the ASPCOMPAT keyword available. So what happens when you run an STA COM component in an MTA application? In low volume environments - nothing much will happen. The COM objects will appear to work just fine as there are no simultaneous thread interactions and the COM component will happily run on a single thread or multiple single threads one at a time. So for testing running components in MTA environments may appear to work just fine. However as load increases and threads get re-used by ASP.NET COM objects will end up getting created on multiple different threads. This can result in crashes or hangs, or data corruption in the STA components which store their state in thread local storage on the STA thread. If threads overlap this global store can easily get corrupted which in turn causes problems. STA ensures that any COM object instance loaded always stays on the same thread it was instantiated on. What about COM+? COM+ is supposed to address the problem of STA in MTA applications by providing an abstraction with it's own thread pool manager for COM objects. It steps in to the COM instantiation pipeline and hands out COM instances from its own internally maintained STA Thread pool. This guarantees that the COM instantiation threads are STA threads if using STA components. COM+ works, but in my experience the technology is very, very slow for STA components. It adds a ton of overhead and reduces COM performance noticably in load tests in IIS. COM+ can make sense in some situations but for Web apps with STA components it falls short. In addition there's also the need to ensure that COM+ is set up and configured on the target machine and the fact that components have to be registered in COM+. COM+ also keeps components up at all times, so if a component needs to be replaced the COM+ package needs to be unloaded (same is true for IIS hosted components but it's more common to manage that). COM+ is an option for well established components, but native STA support tends to provide better performance and more consistent usability, IMHO. STA for non supporting ASP.NET Technologies As mentioned above only WebForms supports STA natively. However, by utilizing the WebForms ASP.NET Page handler internally it's actually possible to trick various other ASP.NET technologies and let them work with STA components. This is ugly but I've used each of these in various applications and I've had minimal problems making them work with FoxPro STA COM components which is about as dififcult as it gets for COM Interop in .NET. In this post I summarize several STA workarounds that enable you to use STA threading with these ASP.NET Technologies: ASMX Web Services ASP.NET MVC WCF Web Services ASP.NET Web API ASMX Web Services I start with classic ASP.NET ASMX Web Services because it's the easiest mechanism that allows for STA modification. It also clearly demonstrates how the WebForms STA Page Handler is the key technology to enable the various other solutions to create STA components. Essentially the way this works is to override the WebForms Page class and hijack it's init functionality for processing requests. Here's what this looks like for Web Services:namespace FoxProAspNet { public class WebServiceStaHandler : System.Web.UI.Page, IHttpAsyncHandler { protected override void OnInit(EventArgs e) { IHttpHandler handler = new WebServiceHandlerFactory().GetHandler( this.Context, this.Context.Request.HttpMethod, this.Context.Request.FilePath, this.Context.Request.PhysicalPath); handler.ProcessRequest(this.Context); this.Context.ApplicationInstance.CompleteRequest(); } public IAsyncResult BeginProcessRequest( HttpContext context, AsyncCallback cb, object extraData) { return this.AspCompatBeginProcessRequest(context, cb, extraData); } public void EndProcessRequest(IAsyncResult result) { this.AspCompatEndProcessRequest(result); } } public class AspCompatWebServiceStaHandlerWithSessionState : WebServiceStaHandler, IRequiresSessionState { } } This class overrides the ASP.NET WebForms Page class which has a little known AspCompatBeginProcessRequest() and AspCompatEndProcessRequest() method that is responsible for providing the WebForms ASPCOMPAT functionality. These methods handle routing requests to STA threads. Note there are two classes - one that includes session state and one that does not. If you plan on using ASP.NET Session state use the latter class, otherwise stick to the former. This maps to the EnableSessionState page setting in WebForms. This class simply hooks into this functionality by overriding the BeginProcessRequest and EndProcessRequest methods and always forcing it into the AspCompat methods. The way this works is that BeginProcessRequest() fires first to set up the threads and starts intializing the handler. As part of that process the OnInit() method is fired which is now already running on an STA thread. The code then creates an instance of the actual WebService handler factory and calls its ProcessRequest method to start executing which generates the Web Service result. Immediately after ProcessRequest the request is stopped with Application.CompletRequest() which ensures that the rest of the Page handler logic doesn't fire. This means that even though the fairly heavy Page class is overridden here, it doesn't end up executing any of its internal processing which makes this code fairly efficient. In a nutshell, we're highjacking the Page HttpHandler and forcing it to process the WebService process handler in the context of the AspCompat handler behavior. Hooking up the Handler Because the above is an HttpHandler implementation you need to hook up the custom handler and replace the standard ASMX handler. To do this you need to modify the web.config file (here for IIS 7 and IIS Express): <configuration> <system.webServer> <handlers> <remove name="WebServiceHandlerFactory-Integrated-4.0" /> <add name="Asmx STA Web Service Handler" path="*.asmx" verb="*" type="FoxProAspNet.WebServiceStaHandler" precondition="integrated"/> </handlers> </system.webServer> </configuration> (Note: The name for the WebServiceHandlerFactory-Integrated-4.0 might be slightly different depending on your server version. Check the IIS Handler configuration in the IIS Management Console for the exact name or simply remove the handler from the list there which will propagate to your web.config). For IIS 5 & 6 (Windows XP/2003) or the Visual Studio Web Server use:<configuration> <system.web> <httpHandlers> <remove path="*.asmx" verb="*" /> <add path="*.asmx" verb="*" type="FoxProAspNet.WebServiceStaHandler" /> </httpHandlers> </system.web></configuration> To test, create a new ASMX Web Service and create a method like this: [WebService(Namespace = "http://foxaspnet.org/")] [WebServiceBinding(ConformsTo = WsiProfiles.BasicProfile1_1)] public class FoxWebService : System.Web.Services.WebService { [WebMethod] public string HelloWorld() { return "Hello World. Threading mode is: " + System.Threading.Thread.CurrentThread.GetApartmentState(); } } Run this before you put in the web.config configuration changes and you should get: Hello World. Threading mode is: MTA Then put the handler mapping into Web.config and you should see: Hello World. Threading mode is: STA And you're on your way to using STA COM components. It's a hack but it works well! I've used this with several high volume Web Service installations with various customers and it's been fast and reliable. ASP.NET MVC ASP.NET MVC has quickly become the most popular ASP.NET technology, replacing WebForms for creating HTML output. MVC is more complex to get started with, but once you understand the basic structure of how requests flow through the MVC pipeline it's easy to use and amazingly flexible in manipulating HTML requests. In addition, MVC has great support for non-HTML output sources like JSON and XML, making it an excellent choice for AJAX requests without any additional tools. Unlike WebForms ASP.NET MVC doesn't support STA threads natively and so some trickery is needed to make it work with STA threads as well. MVC gets its handler implementation through custom route handlers using ASP.NET's built in routing semantics. To work in an STA handler requires working in the Page Handler as part of the Route Handler implementation. As with the Web Service handler the first step is to create a custom HttpHandler that can instantiate an MVC request pipeline properly:public class MvcStaThreadHttpAsyncHandler : Page, IHttpAsyncHandler, IRequiresSessionState { private RequestContext _requestContext; public MvcStaThreadHttpAsyncHandler(RequestContext requestContext) { if (requestContext == null) throw new ArgumentNullException("requestContext"); _requestContext = requestContext; } public IAsyncResult BeginProcessRequest(HttpContext context, AsyncCallback cb, object extraData) { return this.AspCompatBeginProcessRequest(context, cb, extraData); } protected override void OnInit(EventArgs e) { var controllerName = _requestContext.RouteData.GetRequiredString("controller"); var controllerFactory = ControllerBuilder.Current.GetControllerFactory(); var controller = controllerFactory.CreateController(_requestContext, controllerName); if (controller == null) throw new InvalidOperationException("Could not find controller: " + controllerName); try { controller.Execute(_requestContext); } finally { controllerFactory.ReleaseController(controller); } this.Context.ApplicationInstance.CompleteRequest(); } public void EndProcessRequest(IAsyncResult result) { this.AspCompatEndProcessRequest(result); } public override void ProcessRequest(HttpContext httpContext) { throw new NotSupportedException("STAThreadRouteHandler does not support ProcessRequest called (only BeginProcessRequest)"); } } This handler code figures out which controller to load and then executes the controller. MVC internally provides the information needed to route to the appropriate method and pass the right parameters. Like the Web Service handler the logic occurs in the OnInit() and performs all the processing in that part of the request. Next, we need a RouteHandler that can actually pick up this handler. Unlike the Web Service handler where we simply registered the handler, MVC requires a RouteHandler to pick up the handler. RouteHandlers look at the URL's path and based on that decide on what handler to invoke. The route handler is pretty simple - all it does is load our custom handler: public class MvcStaThreadRouteHandler : IRouteHandler { public IHttpHandler GetHttpHandler(RequestContext requestContext) { if (requestContext == null) throw new ArgumentNullException("requestContext"); return new MvcStaThreadHttpAsyncHandler(requestContext); } } At this point you can instantiate this route handler and force STA requests to MVC by specifying a route. The following sets up the ASP.NET Default Route:Route mvcRoute = new Route("{controller}/{action}/{id}", new RouteValueDictionary( new { controller = "Home", action = "Index", id = UrlParameter.Optional }), new MvcStaThreadRouteHandler()); RouteTable.Routes.Add(mvcRoute);   To make this code a little easier to work with and mimic the behavior of the routes.MapRoute() functionality extension method that MVC provides, here is an extension method for MapMvcStaRoute(): public static class RouteCollectionExtensions { public static void MapMvcStaRoute(this RouteCollection routeTable, string name, string url, object defaults = null) { Route mvcRoute = new Route(url, new RouteValueDictionary(defaults), new MvcStaThreadRouteHandler()); RouteTable.Routes.Add(mvcRoute); } } With this the syntax to add  route becomes a little easier and matches the MapRoute() method:RouteTable.Routes.MapMvcStaRoute( name: "Default", url: "{controller}/{action}/{id}", defaults: new { controller = "Home", action = "Index", id = UrlParameter.Optional } ); The nice thing about this route handler, STA Handler and extension method is that it's fully self contained. You can put all three into a single class file and stick it into your Web app, and then simply call MapMvcStaRoute() and it just works. Easy! To see whether this works create an MVC controller like this: public class ThreadTestController : Controller { public string ThreadingMode() { return Thread.CurrentThread.GetApartmentState().ToString(); } } Try this test both with only the MapRoute() hookup in the RouteConfiguration in which case you should get MTA as the value. Then change the MapRoute() call to MapMvcStaRoute() leaving all the parameters the same and re-run the request. You now should see STA as the result. You're on your way using STA COM components reliably in ASP.NET MVC. WCF Web Services running through IIS WCF Web Services provide a more robust and wider range of services for Web Services. You can use WCF over HTTP, TCP, and Pipes, and WCF services support WS* secure services. There are many features in WCF that go way beyond what ASMX can do. But it's also a bit more complex than ASMX. As a basic rule if you need to serve straight SOAP Services over HTTP I 'd recommend sticking with the simpler ASMX services especially if COM is involved. If you need WS* support or want to serve data over non-HTTP protocols then WCF makes more sense. WCF is not my forte but I found a solution from Scott Seely on his blog that describes the progress and that seems to work well. I'm copying his code below so this STA information is all in one place and quickly explain. Scott's code basically works by creating a custom OperationBehavior which can be specified via an [STAOperation] attribute on every method. Using his attribute you end up with a class (or Interface if you separate the contract and class) that looks like this: [ServiceContract] public class WcfService { [OperationContract] public string HelloWorldMta() { return Thread.CurrentThread.GetApartmentState().ToString(); } // Make sure you use this custom STAOperationBehavior // attribute to force STA operation of service methods [STAOperationBehavior] [OperationContract] public string HelloWorldSta() { return Thread.CurrentThread.GetApartmentState().ToString(); } } Pretty straight forward. The latter method returns STA while the former returns MTA. To make STA work every method needs to be marked up. The implementation consists of the attribute and OperationInvoker implementation. Here are the two classes required to make this work from Scott's post:public class STAOperationBehaviorAttribute : Attribute, IOperationBehavior { public void AddBindingParameters(OperationDescription operationDescription, System.ServiceModel.Channels.BindingParameterCollection bindingParameters) { } public void ApplyClientBehavior(OperationDescription operationDescription, System.ServiceModel.Dispatcher.ClientOperation clientOperation) { // If this is applied on the client, well, it just doesn’t make sense. // Don’t throw in case this attribute was applied on the contract // instead of the implementation. } public void ApplyDispatchBehavior(OperationDescription operationDescription, System.ServiceModel.Dispatcher.DispatchOperation dispatchOperation) { // Change the IOperationInvoker for this operation. dispatchOperation.Invoker = new STAOperationInvoker(dispatchOperation.Invoker); } public void Validate(OperationDescription operationDescription) { if (operationDescription.SyncMethod == null) { throw new InvalidOperationException("The STAOperationBehaviorAttribute " + "only works for synchronous method invocations."); } } } public class STAOperationInvoker : IOperationInvoker { IOperationInvoker _innerInvoker; public STAOperationInvoker(IOperationInvoker invoker) { _innerInvoker = invoker; } public object[] AllocateInputs() { return _innerInvoker.AllocateInputs(); } public object Invoke(object instance, object[] inputs, out object[] outputs) { // Create a new, STA thread object[] staOutputs = null; object retval = null; Thread thread = new Thread( delegate() { retval = _innerInvoker.Invoke(instance, inputs, out staOutputs); }); thread.SetApartmentState(ApartmentState.STA); thread.Start(); thread.Join(); outputs = staOutputs; return retval; } public IAsyncResult InvokeBegin(object instance, object[] inputs, AsyncCallback callback, object state) { // We don’t handle async… throw new NotImplementedException(); } public object InvokeEnd(object instance, out object[] outputs, IAsyncResult result) { // We don’t handle async… throw new NotImplementedException(); } public bool IsSynchronous { get { return true; } } } The key in this setup is the Invoker and the Invoke method which creates a new thread and then fires the request on this new thread. Because this approach creates a new thread for every request it's not super efficient. There's a bunch of overhead involved in creating the thread and throwing it away after each thread, but it'll work for low volume requests and insure each thread runs in STA mode. If better performance is required it would be useful to create a custom thread manager that can pool a number of STA threads and hand off threads as needed rather than creating new threads on every request. If your Web Service needs are simple and you need only to serve standard SOAP 1.x requests, I would recommend sticking with ASMX services. It's easier to set up and work with and for STA component use it'll be significantly better performing since ASP.NET manages the STA thread pool for you rather than firing new threads for each request. One nice thing about Scotts code is though that it works in any WCF environment including self hosting. It has no dependency on ASP.NET or WebForms for that matter. STA - If you must STA components are a  pain in the ass and thankfully there isn't too much stuff out there anymore that requires it. But when you need it and you need to access STA functionality from .NET at least there are a few options available to make it happen. Each of these solutions is a bit hacky, but they work - I've used all of them in production with good results with FoxPro components. I hope compiling all of these in one place here makes it STA consumption a little bit easier. I feel your pain :-) Resources Download STA Handler Code Examples Scott Seely's original STA WCF OperationBehavior Article© Rick Strahl, West Wind Technologies, 2005-2012Posted in FoxPro   ASP.NET  .NET  COM   Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

  Read the article

• Basic Spatial Data with SQL Server and Entity Framework 5.0

  - by Rick Strahl

  In my most recent project we needed to do a bit of geo-spatial referencing. While spatial features have been in SQL Server for a while using those features inside of .NET applications hasn't been as straight forward as could be, because .NET natively doesn't support spatial types. There are workarounds for this with a few custom project like SharpMap or a hack using the Sql Server specific Geo types found in the Microsoft.SqlTypes assembly that ships with SQL server. While these approaches work for manipulating spatial data from .NET code, they didn't work with database access if you're using Entity Framework. Other ORM vendors have been rolling their own versions of spatial integration. In Entity Framework 5.0 running on .NET 4.5 the Microsoft ORM finally adds support for spatial types as well. In this post I'll describe basic geography features that deal with single location and distance calculations which is probably the most common usage scenario. SQL Server Transact-SQL Syntax for Spatial Data Before we look at how things work with Entity framework, lets take a look at how SQL Server allows you to use spatial data to get an understanding of the underlying semantics. The following SQL examples should work with SQL 2008 and forward. Let's start by creating a test table that includes a Geography field and also a pair of Long/Lat fields that demonstrate how you can work with the geography functions even if you don't have geography/geometry fields in the database. Here's the CREATE command:CREATE TABLE [dbo].[Geo]( [id] [int] IDENTITY(1,1) NOT NULL, [Location] [geography] NULL, [Long] [float] NOT NULL, [Lat] [float] NOT NULL ) Now using plain SQL you can insert data into the table using geography::STGeoFromText SQL CLR function:insert into Geo( Location , long, lat ) values ( geography::STGeomFromText ('POINT(-121.527200 45.712113)', 4326), -121.527200, 45.712113 ) insert into Geo( Location , long, lat ) values ( geography::STGeomFromText ('POINT(-121.517265 45.714240)', 4326), -121.517265, 45.714240 ) insert into Geo( Location , long, lat ) values ( geography::STGeomFromText ('POINT(-121.511536 45.714825)', 4326), -121.511536, 45.714825) The STGeomFromText function accepts a string that points to a geometric item (a point here but can also be a line or path or polygon and many others). You also need to provide an SRID (Spatial Reference System Identifier) which is an integer value that determines the rules for how geography/geometry values are calculated and returned. For mapping/distance functionality you typically want to use 4326 as this is the format used by most mapping software and geo-location libraries like Google and Bing. The spatial data in the Location field is stored in binary format which looks something like this: Once the location data is in the database you can query the data and do simple distance computations very easily. For example to calculate the distance of each of the values in the database to another spatial point is very easy to calculate. Distance calculations compare two points in space using a direct line calculation. For our example I'll compare a new point to all the points in the database. Using the Location field the SQL looks like this:-- create a source point DECLARE @s geography SET @s = geography:: STGeomFromText('POINT(-121.527200 45.712113)' , 4326); --- return the ids select ID, Location as Geo , Location .ToString() as Point , @s.STDistance( Location) as distance from Geo order by distance The code defines a new point which is the base point to compare each of the values to. You can also compare values from the database directly, but typically you'll want to match a location to another location and determine the difference for which you can use the geography::STDistance function. This query produces the following output: The STDistance function returns the straight line distance between the passed in point and the point in the database field. The result for SRID 4326 is always in meters. Notice that the first value passed was the same point so the difference is 0. The other two points are two points here in town in Hood River a little ways away - 808 and 1256 meters respectively. Notice also that you can order the result by the resulting distance, which effectively gives you results that are ordered radially out from closer to further away. This is great for searches of points of interest near a central location (YOU typically!). These geolocation functions are also available to you if you don't use the Geography/Geometry types, but plain float values. It's a little more work, as each point has to be created in the query using the string syntax, but the following code doesn't use a geography field but produces the same result as the previous query.--- using float fields select ID, geography::STGeomFromText ('POINT(' + STR (long, 15,7 ) + ' ' + Str(lat ,15, 7) + ')' , 4326), geography::STGeomFromText ('POINT(' + STR (long, 15,7 ) + ' ' + Str(lat ,15, 7) + ')' , 4326). ToString(), @s.STDistance( geography::STGeomFromText ('POINT(' + STR(long ,15, 7) + ' ' + Str(lat ,15, 7) + ')' , 4326)) as distance from geo order by distance Spatial Data in the Entity Framework Prior to Entity Framework 5.0 on .NET 4.5 consuming of the data above required using stored procedures or raw SQL commands to access the spatial data. In Entity Framework 5 however, Microsoft introduced the new DbGeometry and DbGeography types. These immutable location types provide a bunch of functionality for manipulating spatial points using geometry functions which in turn can be used to do common spatial queries like I described in the SQL syntax above. The DbGeography/DbGeometry types are immutable, meaning that you can't write to them once they've been created. They are a bit odd in that you need to use factory methods in order to instantiate them - they have no constructor() and you can't assign to properties like Latitude and Longitude. Creating a Model with Spatial Data Let's start by creating a simple Entity Framework model that includes a Location property of type DbGeography: public class GeoLocationContext : DbContext { public DbSet<GeoLocation> Locations { get; set; } } public class GeoLocation { public int Id { get; set; } public DbGeography Location { get; set; } public string Address { get; set; } } That's all there's to it. When you run this now against SQL Server, you get a Geography field for the Location property, which looks the same as the Location field in the SQL examples earlier. Adding Spatial Data to the Database Next let's add some data to the table that includes some latitude and longitude data. An easy way to find lat/long locations is to use Google Maps to pinpoint your location, then right click and click on What's Here. Click on the green marker to get the GPS coordinates. To add the actual geolocation data create an instance of the GeoLocation type and use the DbGeography.PointFromText() factory method to create a new point to assign to the Location property:[TestMethod] public void AddLocationsToDataBase() { var context = new GeoLocationContext(); // remove all context.Locations.ToList().ForEach( loc => context.Locations.Remove(loc)); context.SaveChanges(); var location = new GeoLocation() { // Create a point using native DbGeography Factory method Location = DbGeography.PointFromText( string.Format("POINT({0} {1})", -121.527200,45.712113) ,4326), Address = "301 15th Street, Hood River" }; context.Locations.Add(location); location = new GeoLocation() { Location = CreatePoint(45.714240, -121.517265), Address = "The Hatchery, Bingen" }; context.Locations.Add(location); location = new GeoLocation() { // Create a point using a helper function (lat/long) Location = CreatePoint(45.708457, -121.514432), Address = "Kaze Sushi, Hood River" }; context.Locations.Add(location); location = new GeoLocation() { Location = CreatePoint(45.722780, -120.209227), Address = "Arlington, OR" }; context.Locations.Add(location); context.SaveChanges(); } As promised, a DbGeography object has to be created with one of the static factory methods provided on the type as the Location.Longitude and Location.Latitude properties are read only. Here I'm using PointFromText() which uses a "Well Known Text" format to specify spatial data. In the first example I'm specifying to create a Point from a longitude and latitude value, using an SRID of 4326 (just like earlier in the SQL examples). You'll probably want to create a helper method to make the creation of Points easier to avoid that string format and instead just pass in a couple of double values. Here's my helper called CreatePoint that's used for all but the first point creation in the sample above:public static DbGeography CreatePoint(double latitude, double longitude) { var text = string.Format(CultureInfo.InvariantCulture.NumberFormat, "POINT({0} {1})", longitude, latitude); // 4326 is most common coordinate system used by GPS/Maps return DbGeography.PointFromText(text, 4326); } Using the helper the syntax becomes a bit cleaner, requiring only a latitude and longitude respectively. Note that my method intentionally swaps the parameters around because Latitude and Longitude is the common format I've seen with mapping libraries (especially Google Mapping/Geolocation APIs with their LatLng type). When the context is changed the data is written into the database using the SQL Geography type which looks the same as in the earlier SQL examples shown. Querying Once you have some location data in the database it's now super easy to query the data and find out the distance between locations. A common query is to ask for a number of locations that are near a fixed point - typically your current location and order it by distance. Using LINQ to Entities a query like this is easy to construct:[TestMethod] public void QueryLocationsTest() { var sourcePoint = CreatePoint(45.712113, -121.527200); var context = new GeoLocationContext(); // find any locations within 5 kilometers ordered by distance var matches = context.Locations .Where(loc => loc.Location.Distance(sourcePoint) < 5000) .OrderBy( loc=> loc.Location.Distance(sourcePoint) ) .Select( loc=> new { Address = loc.Address, Distance = loc.Location.Distance(sourcePoint) }); Assert.IsTrue(matches.Count() > 0); foreach (var location in matches) { Console.WriteLine("{0} ({1:n0} meters)", location.Address, location.Distance); } } This example produces: 301 15th Street, Hood River (0 meters)The Hatchery, Bingen (809 meters)Kaze Sushi, Hood River (1,074 meters)   The first point in the database is the same as my source point I'm comparing against so the distance is 0. The other two are within the 5 mile radius, while the Arlington location which is 65 miles or so out is not returned. The result is ordered by distance from closest to furthest away. In the code, I first create a source point that is the basis for comparison. The LINQ query then selects all locations that are within 5km of the source point using the Location.Distance() function, which takes a source point as a parameter. You can either use a pre-defined value as I'm doing here, or compare against another database DbGeography property (say when you have to points in the same database for things like routes). What's nice about this query syntax is that it's very clean and easy to read and understand. You can calculate the distance and also easily order by the distance to provide a result that shows locations from closest to furthest away which is a common scenario for any application that places a user in the context of several locations. It's now super easy to accomplish this. Meters vs. Miles As with the SQL Server functions, the Distance() method returns data in meters, so if you need to work with miles or feet you need to do some conversion. Here are a couple of helpers that might be useful (can be found in GeoUtils.cs of the sample project):/// <summary> /// Convert meters to miles /// </summary> /// <param name="meters"></param> /// <returns></returns> public static double MetersToMiles(double? meters) { if (meters == null) return 0F; return meters.Value * 0.000621371192; } /// <summary> /// Convert miles to meters /// </summary> /// <param name="miles"></param> /// <returns></returns> public static double MilesToMeters(double? miles) { if (miles == null) return 0; return miles.Value * 1609.344; } Using these two helpers you can query on miles like this:[TestMethod] public void QueryLocationsMilesTest() { var sourcePoint = CreatePoint(45.712113, -121.527200); var context = new GeoLocationContext(); // find any locations within 5 miles ordered by distance var fiveMiles = GeoUtils.MilesToMeters(5); var matches = context.Locations .Where(loc => loc.Location.Distance(sourcePoint) <= fiveMiles) .OrderBy(loc => loc.Location.Distance(sourcePoint)) .Select(loc => new { Address = loc.Address, Distance = loc.Location.Distance(sourcePoint) }); Assert.IsTrue(matches.Count() > 0); foreach (var location in matches) { Console.WriteLine("{0} ({1:n1} miles)", location.Address, GeoUtils.MetersToMiles(location.Distance)); } } which produces: 301 15th Street, Hood River (0.0 miles)The Hatchery, Bingen (0.5 miles)Kaze Sushi, Hood River (0.7 miles) Nice 'n simple. .NET 4.5 Only Note that DbGeography and DbGeometry are exclusive to Entity Framework 5.0 (not 4.4 which ships in the same NuGet package or installer) and requires .NET 4.5. That's because the new DbGeometry and DbGeography (and related) types are defined in the 4.5 version of System.Data.Entity which is a CLR assembly and is only updated by major versions of .NET. Why this decision was made to add these types to System.Data.Entity rather than to the frequently updated EntityFramework assembly that would have possibly made this work in .NET 4.0 is beyond me, especially given that there are no native .NET framework spatial types to begin with. I find it also odd that there is no native CLR spatial type. The DbGeography and DbGeometry types are specific to Entity Framework and live on those assemblies. They will also work for general purpose, non-database spatial data manipulation, but then you are forced into having a dependency on System.Data.Entity, which seems a bit silly. There's also a System.Spatial assembly that's apparently part of WCF Data Services which in turn don't work with Entity framework. Another example of multiple teams at Microsoft not communicating and implementing the same functionality (differently) in several different places. Perplexed as a I may be, for EF specific code the Entity framework specific types are easy to use and work well. Working with pre-.NET 4.5 Entity Framework and Spatial Data If you can't go to .NET 4.5 just yet you can also still use spatial features in Entity Framework, but it's a lot more work as you can't use the DbContext directly to manipulate the location data. You can still run raw SQL statements to write data into the database and retrieve results using the same TSQL syntax I showed earlier using Context.Database.ExecuteSqlCommand(). Here's code that you can use to add location data into the database:[TestMethod] public void RawSqlEfAddTest() { string sqlFormat = @"insert into GeoLocations( Location, Address) values ( geography::STGeomFromText('POINT({0} {1})', 4326),@p0 )"; var sql = string.Format(sqlFormat,-121.527200, 45.712113); Console.WriteLine(sql); var context = new GeoLocationContext(); Assert.IsTrue(context.Database.ExecuteSqlCommand(sql,"301 N. 15th Street") > 0); } Here I'm using the STGeomFromText() function to add the location data. Note that I'm using string.Format here, which usually would be a bad practice but is required here. I was unable to use ExecuteSqlCommand() and its named parameter syntax as the longitude and latitude parameters are embedded into a string. Rest assured it's required as the following does not work:string sqlFormat = @"insert into GeoLocations( Location, Address) values ( geography::STGeomFromText('POINT(@p0 @p1)', 4326),@p2 )";context.Database.ExecuteSqlCommand(sql, -121.527200, 45.712113, "301 N. 15th Street") Explicitly assigning the point value with string.format works however. There are a number of ways to query location data. You can't get the location data directly, but you can retrieve the point string (which can then be parsed to get Latitude and Longitude) and you can return calculated values like distance. Here's an example of how to retrieve some geo data into a resultset using EF's and SqlQuery method:[TestMethod] public void RawSqlEfQueryTest() { var sqlFormat = @" DECLARE @s geography SET @s = geography:: STGeomFromText('POINT({0} {1})' , 4326); SELECT Address, Location.ToString() as GeoString, @s.STDistance( Location) as Distance FROM GeoLocations ORDER BY Distance"; var sql = string.Format(sqlFormat, -121.527200, 45.712113); var context = new GeoLocationContext(); var locations = context.Database.SqlQuery<ResultData>(sql); Assert.IsTrue(locations.Count() > 0); foreach (var location in locations) { Console.WriteLine(location.Address + " " + location.GeoString + " " + location.Distance); } } public class ResultData { public string GeoString { get; set; } public double Distance { get; set; } public string Address { get; set; } } Hopefully you don't have to resort to this approach as it's fairly limited. Using the new DbGeography/DbGeometry types makes this sort of thing so much easier. When I had to use code like this before I typically ended up retrieving data pks only and then running another query with just the PKs to retrieve the actual underlying DbContext entities. This was very inefficient and tedious but it did work. Summary For the current project I'm working on we actually made the switch to .NET 4.5 purely for the spatial features in EF 5.0. This app heavily relies on spatial queries and it was worth taking a chance with pre-release code to get this ease of integration as opposed to manually falling back to stored procedures or raw SQL string queries to return spatial specific queries. Using native Entity Framework code makes life a lot easier than the alternatives. It might be a late addition to Entity Framework, but it sure makes location calculations and storage easy. Where do you want to go today? ;-) Resources Download Sample Project© Rick Strahl, West Wind Technologies, 2005-2012Posted in ADO.NET  Sql Server  .NET   Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

  Read the article

• Grandparent – Parent – Child Reports in SQL Developer

  - by thatjeffsmith

  You’ll never see one of these family stickers on my car, but I promise not to judge…much. Parent – Child reports are pretty straightforward in Oracle SQL Developer. You have a ‘parent’ report, and then one or more ‘child’ reports which are based off of a value in a selected row or value from the parent. If you need a quick tutorial to get up to speed on the subject, go ahead and take 5 minutes Shortly before I left for vacation 2 weeks agao, I got an interesting question from one of my Twitter Followers: @thatjeffsmith any luck with the #Oracle awr reports in #SQLDeveloper?This is easy with multi generation parent>child Done in #dbvisualizer — Ronald Rood (@Ik_zelf) August 26, 2012 Now that I’m back from vacation, I can tell Ronald and everyone else that the answer is ‘Yes!’ And here’s how Time to Get Out Your XML Editor Don’t have one? That’s OK, SQL Developer can edit XML files. While the Reporting interface doesn’t surface the ability to create multi-generational reports, the underlying code definitely supports it. We just need to hack away at the XML that powers a report. For this example I’m going to start simple. A query that brings back DEPARTMENTs, then EMPLOYEES, then JOBs. We can build the first two parts of the report using the report editor. A Parent-Child report in Oracle SQL Developer (Departments – Employees) Save the Report to XML Once you’ve generated the XML file, open it with your favorite XML editor. For this example I’ll be using the build-it XML editor in SQL Developer. SQL Developer Reports in their raw XML glory! Right after the PDF element in the XML document, we can start a new ‘child’ report by inserting a DISPLAY element. I just copied and pasted the existing ‘display’ down so I wouldn’t have to worry about screwing anything up. Note I also needed to change the ‘master’ name so it wouldn’t confuse SQL Developer when I try to import/open a report that has the same name. Also I needed to update the binds tags to reflect the names from the child versus the original parent report. This is pretty easy to figure out on your own actually – I mean I’m no real developer and I got it pretty quick. <?xml version="1.0" encoding="UTF-8" ?> <displays> <display id="92857fce-0139-1000-8006-7f0000015340" type="" style="Table" enable="true"> <name><![CDATA[Grandparent]]></name> <description><![CDATA[]]></description> <tooltip><![CDATA[]]></tooltip> <drillclass><![CDATA[null]]></drillclass> <CustomValues> <TYPE>horizontal</TYPE> </CustomValues> <query> <sql><![CDATA[select * from hr.departments]]></sql> </query> <pdf version="VERSION_1_7" compression="CONTENT"> <docproperty title="" author="" subject="" keywords="" /> <cell toppadding="2" bottompadding="2" leftpadding="2" rightpadding="2" horizontalalign="LEFT" verticalalign="TOP" wrap="true" /> <column> <heading font="Courier" size="10" style="NORMAL" color="-16777216" rowshading="-1" labeling="FIRST_PAGE" /> <footing font="Courier" size="10" style="NORMAL" color="-16777216" rowshading="-1" labeling="NONE" /> <blob blob="NONE" zip="false" /> </column> <table font="Courier" size="10" style="NORMAL" color="-16777216" userowshading="false" oddrowshading="-1" evenrowshading="-1" showborders="true" spacingbefore="12" spacingafter="12" horizontalalign="LEFT" /> <header enable="false" generatedate="false"> <data> null </data> </header> <footer enable="false" generatedate="false"> <data value="null" /> </footer> <security enable="false" useopenpassword="false" openpassword="" encryption="EXCLUDE_METADATA"> <permission enable="false" permissionpassword="" allowcopying="true" allowprinting="true" allowupdating="false" allowaccessdevices="true" /> </security> <pagesetup papersize="LETTER" orientation="1" measurement="in" margintop="1.0" marginbottom="1.0" marginleft="1.0" marginright="1.0" /> </pdf> <display id="null" type="" style="Table" enable="true"> <name><![CDATA[Parent]]></name> <description><![CDATA[]]></description> <tooltip><![CDATA[]]></tooltip> <drillclass><![CDATA[null]]></drillclass> <CustomValues> <TYPE>horizontal</TYPE> </CustomValues> <query> <sql><![CDATA[select * from hr.employees where department_id = EPARTMENT_ID]]></sql> <binds> <bind id="DEPARTMENT_ID"> <prompt><![CDATA[DEPARTMENT_ID]]></prompt> <tooltip><![CDATA[DEPARTMENT_ID]]></tooltip> <value><![CDATA[NULL_VALUE]]></value> </bind> </binds> </query> <pdf version="VERSION_1_7" compression="CONTENT"> <docproperty title="" author="" subject="" keywords="" /> <cell toppadding="2" bottompadding="2" leftpadding="2" rightpadding="2" horizontalalign="LEFT" verticalalign="TOP" wrap="true" /> <column> <heading font="Courier" size="10" style="NORMAL" color="-16777216" rowshading="-1" labeling="FIRST_PAGE" /> <footing font="Courier" size="10" style="NORMAL" color="-16777216" rowshading="-1" labeling="NONE" /> <blob blob="NONE" zip="false" /> </column> <table font="Courier" size="10" style="NORMAL" color="-16777216" userowshading="false" oddrowshading="-1" evenrowshading="-1" showborders="true" spacingbefore="12" spacingafter="12" horizontalalign="LEFT" /> <header enable="false" generatedate="false"> <data> null </data> </header> <footer enable="false" generatedate="false"> <data value="null" /> </footer> <security enable="false" useopenpassword="false" openpassword="" encryption="EXCLUDE_METADATA"> <permission enable="false" permissionpassword="" allowcopying="true" allowprinting="true" allowupdating="false" allowaccessdevices="true" /> </security> <pagesetup papersize="LETTER" orientation="1" measurement="in" margintop="1.0" marginbottom="1.0" marginleft="1.0" marginright="1.0" /> </pdf> <display id="null" type="" style="Table" enable="true"> <name><![CDATA[Child]]></name> <description><![CDATA[]]></description> <tooltip><![CDATA[]]></tooltip> <drillclass><![CDATA[null]]></drillclass> <CustomValues> <TYPE>horizontal</TYPE> </CustomValues> <query> <sql><![CDATA[select * from hr.jobs where job_id = :JOB_ID]]></sql> <binds> <bind id="JOB_ID"> <prompt><![CDATA[JOB_ID]]></prompt> <tooltip><![CDATA[JOB_ID]]></tooltip> <value><![CDATA[NULL_VALUE]]></value> </bind> </binds> </query> <pdf version="VERSION_1_7" compression="CONTENT"> <docproperty title="" author="" subject="" keywords="" /> <cell toppadding="2" bottompadding="2" leftpadding="2" rightpadding="2" horizontalalign="LEFT" verticalalign="TOP" wrap="true" /> <column> <heading font="Courier" size="10" style="NORMAL" color="-16777216" rowshading="-1" labeling="FIRST_PAGE" /> <footing font="Courier" size="10" style="NORMAL" color="-16777216" rowshading="-1" labeling="NONE" /> <blob blob="NONE" zip="false" /> </column> <table font="Courier" size="10" style="NORMAL" color="-16777216" userowshading="false" oddrowshading="-1" evenrowshading="-1" showborders="true" spacingbefore="12" spacingafter="12" horizontalalign="LEFT" /> <header enable="false" generatedate="false"> <data> null </data> </header> <footer enable="false" generatedate="false"> <data value="null" /> </footer> <security enable="false" useopenpassword="false" openpassword="" encryption="EXCLUDE_METADATA"> <permission enable="false" permissionpassword="" allowcopying="true" allowprinting="true" allowupdating="false" allowaccessdevices="true" /> </security> <pagesetup papersize="LETTER" orientation="1" measurement="in" margintop="1.0" marginbottom="1.0" marginleft="1.0" marginright="1.0" /> </pdf> </display> </display> </display> </displays> Save the file and ‘Open Report…’ You’ll see your new report name in the tree. You just need to double-click it to open it. Here’s what it looks like running A 3 generation family Now Let’s Build an AWR Text Report Ronald wanted to have the ability to query AWR snapshots and generate the AWR reports. That requires a few inputs, including a START and STOP snapshot ID. That basically tells AWR what time period to use for generating the report. And here’s where it gets tricky. We’ll need to use aliases for the SNAP_ID column. Since we’re using the same column name from 2 different queries, we need to use different bind variables. Fortunately for us, SQL Developer’s clever enough to use the column alias as the BIND. Here’s what I mean: Grandparent Query SELECT snap_id start1, begin_interval_time, end_interval_time FROM dba_hist_snapshot ORDER BY 1 asc Parent Query SELECT snap_id stop1, begin_interval_time, end_interval_time, :START1 carry FROM dba_hist_snapshot WHERE snap_id > :START1 ORDER BY 1 asc And here’s where it gets even trickier – you can’t reference a bind from outside the parent query. My grandchild report can’t reference a value from the grandparent report. So I just carry the selected value down to the parent. In my parent query SELECT you see the ‘:START1′ at the end? That’s making that value available to me when I use it in my grandchild query. To complicate things a bit further, I can’t have a column name with a ‘:’ in it, or SQL Developer will get confused when I try to reference the value of the variable with the ‘:’ – and ‘::Name’ doesn’t work. But that’s OK, just alias it. Grandchild Query Select Output From Table(Dbms_Workload_Repository.Awr_Report_Text(1298953802, 1,:CARRY, :STOP1)); Ok, and the last trick – I hard-coded my report to use my database’s DB_ID and INST_ID into the AWR package call. Now a smart person could figure out a way to make that work on any database, but I got lazy and and ran out of time. But this should be far enough for you to take it from here. Here’s what my report looks like now: Caution: don’t run this if you haven’t licensed Enterprise Edition with Diagnostic Pack. The Raw XML for this AWR Report <?xml version="1.0" encoding="UTF-8" ?> <displays> <display id="927ba96c-0139-1000-8001-7f0000015340" type="" style="Table" enable="true"> <name><![CDATA[AWR Start Stop Report Final]]></name> <description><![CDATA[]]></description> <tooltip><![CDATA[]]></tooltip> <drillclass><![CDATA[null]]></drillclass> <CustomValues> <TYPE>horizontal</TYPE> </CustomValues> <query> <sql><![CDATA[SELECT snap_id start1, begin_interval_time, end_interval_time FROM dba_hist_snapshot ORDER BY 1 asc]]></sql> </query> <display id="null" type="" style="Table" enable="true"> <name><![CDATA[Stop SNAP_ID]]></name> <description><![CDATA[]]></description> <tooltip><![CDATA[]]></tooltip> <drillclass><![CDATA[null]]></drillclass> <CustomValues> <TYPE>horizontal</TYPE> </CustomValues> <query> <sql><![CDATA[SELECT snap_id stop1, begin_interval_time, end_interval_time, :START1 carry FROM dba_hist_snapshot WHERE snap_id > :START1 ORDER BY 1 asc]]></sql> </query> <display id="null" type="" style="Table" enable="true"> <name><![CDATA[AWR Report]]></name> <description><![CDATA[]]></description> <tooltip><![CDATA[]]></tooltip> <drillclass><![CDATA[null]]></drillclass> <CustomValues> <TYPE>horizontal</TYPE> </CustomValues> <query> <sql><![CDATA[Select Output From Table(Dbms_Workload_Repository.Awr_Report_Text(1298953802, 1,:CARRY, :STOP1 ))]]></sql> </query> </display> </display> </display> </displays> Should We Build Support for Multiple Levels of Reports into the User Interface? Let us know! A comment here or a suggestion on our SQL Developer Exchange might help your case!

  Read the article

• How to shoot yourself in the foot (DO NOT Read in the office)

  - by TATWORTH

  Originally posted on: http://geekswithblogs.net/TATWORTH/archive/2013/06/21/how-to-shoot-yourself-in-the-foot-do-not-read.aspxLet me make it absolutely clear - the following is:merely collated by your Geek from http://www.codeproject.com/Lounge.aspx?msg=3917012#xx3917012xxvery, very very funny so you read it in the presence of others at your own riskso here is the list - you have been warned!C You shoot yourself in the foot.   C++ You accidently create a dozen instances of yourself and shoot them all in the foot. Providing emergency medical assistance is impossible since you can't tell which are bitwise copies and which are just pointing at others and saying "That's me, over there."   FORTRAN You shoot yourself in each toe, iteratively, until you run out of toes, then you read in the next foot and repeat. If you run out of bullets, you continue anyway because you have no exception-handling facility.   Modula-2 After realizing that you can't actually accomplish anything in this language, you shoot yourself in the head.   COBOL USEing a COLT 45 HANDGUN, AIM gun at LEG.FOOT, THEN place ARM.HAND.FINGER on HANDGUN.TRIGGER and SQUEEZE. THEN return HANDGUN to HOLSTER. CHECK whether shoelace needs to be retied.   Lisp You shoot yourself in the appendage which holds the gun with which you shoot yourself in the appendage which holds the gun with which you shoot yourself in the appendage which holds...   BASIC Shoot yourself in the foot with a water pistol. On big systems, continue until entire lower body is waterlogged.   Forth Foot yourself in the shoot.   APL You shoot yourself in the foot; then spend all day figuring out how to do it in fewer characters.   Pascal The compiler won't let you shoot yourself in the foot.   Snobol If you succeed, shoot yourself in the left foot. If you fail, shoot yourself in the right foot.   HyperTalk Put the first bullet of the gun into foot left of leg of you. Answer the result.   Prolog You tell your program you want to be shot in the foot. The program figures out how to do it, but the syntax doesn't allow it to explain.   370 JCL You send your foot down to MIS with a 4000-page document explaining how you want it to be shot. Three years later, your foot comes back deep-fried.   FORTRAN-77 You shoot yourself in each toe, iteratively, until you run out of toes, then you read in the next foot and repeat. If you run out of bullets, you continue anyway because you still can't do exception-processing.   Modula-2 (alternative) You perform a shooting on what might be currently a foot with what might be currently a bullet shot by what might currently be a gun.   BASIC (compiled) You shoot yourself in the foot with a BB using a SCUD missile launcher.   Visual Basic You'll really only appear to have shot yourself in the foot, but you'll have so much fun doing it that you won't care.   Forth (alternative) BULLET DUP3 * GUN LOAD FOOT AIM TRIGGER PULL BANG! EMIT DEAD IF DROP ROT THEN (This takes about five bytes of memory, executes in two to ten clock cycles on any processor and can be used to replace any existing function of the language as well as in any future words). (Welcome to bottom up programming - where you, too, can perform compiler pre-processing instead of writing code)   APL (alternative) You hear a gunshot and there's a hole in your foot, but you don't remember enough linear algebra to understand what happened. or @#&^$%&%^ foot   Pascal (alternative) Same as Modula-2 except that the bullet is not the right type for the gun and your hand is blown off.   Snobol (alternative) You grab your foot with your hand, then rewrite your hand to be a bullet. The act of shooting the original foot then changes your hand/bullet into yet another foot (a left foot).   Prolog (alternative) You attempt to shoot yourself in the foot, but the bullet, failing to find its mark, backtracks to the gun, which then explodes in your face.   COMAL You attempt to shoot yourself in the foot with a water pistol, but the bore is clogged, and the pressure build-up blows apart both the pistol and your hand. or draw_pistol aim_at_foot(left) pull_trigger hop(swearing)   Scheme As Lisp, but none of the other appendages are aware of this happening.   Algol You shoot yourself in the foot with a musket. The musket is aesthetically fascinating and the wound baffles the adolescent medic in the emergency room.   Ada If you are dumb enough to actually use this language, the United States Department of Defense will kidnap you, stand you up in front of a firing squad and tell the soldiers, "Shoot at the feet." or The Department of Defense shoots you in the foot after offering you a blindfold and a last cigarette. or After correctly packaging your foot, you attempt to concurrently load the gun, pull the trigger, scream and shoot yourself in the foot. When you try, however, you discover that your foot is of the wrong type. or After correctly packing your foot, you attempt to concurrently load the gun, pull the trigger, scream, and confidently aim at your foot knowing it is safe. However the cordite in the round does an Unchecked Conversion, fires and shoots you in the foot anyway.   Eiffel   You create a GUN object, two FOOT objects and a BULLET object. The GUN passes both the FOOT objects a reference to the BULLET. The FOOT objects increment their hole counts and forget about the BULLET. A little demon then drives a garbage truck over your feet and grabs the bullet (both of it) on the way. Smalltalk You spend so much time playing with the graphics and windowing system that your boss shoots you in the foot, takes away your workstation and makes you develop in COBOL on a character terminal. or You send the message shoot to gun, with selectors bullet and myFoot. A window pops up saying Gunpowder doesNotUnderstand: spark. After several fruitless hours spent browsing the methods for Trigger, FiringPin and IdealGas, you take the easy way out and create ShotFoot, a subclass of Foot with an additional instance variable bulletHole. Object Oriented Pascal You perform a shooting on what might currently be a foot with what might currently be a bullet fired from what might currently be a gun.   PL/I You consume all available system resources, including all the offline bullets. The Data Processing & Payroll Department doubles its size, triples its budget, acquires four new mainframes and drops the original one on your foot. Postscript foot bullets 6 locate loadgun aim gun shoot showpage or It takes the bullet ten minutes to travel from the gun to your foot, by which time you're long since gone out to lunch. The text comes out great, though.   PERL You stab yourself in the foot repeatedly with an incredibly large and very heavy Swiss Army knife. or You pick up the gun and begin to load it. The gun and your foot begin to grow to huge proportions and the world around you slows down, until the gun fires. It makes a tiny hole, which you don't feel. Assembly Language You crash the OS and overwrite the root disk. The system administrator arrives and shoots you in the foot. After a moment of contemplation, the administrator shoots himself in the foot and then hops around the room rabidly shooting at everyone in sight. or You try to shoot yourself in the foot only to discover you must first reinvent the gun, the bullet, and your foot.or The bullet travels to your foot instantly, but it took you three weeks to load the round and aim the gun.   BCPL You shoot yourself somewhere in the leg -- you can't get any finer resolution than that. Concurrent Euclid You shoot yourself in somebody else's foot.   Motif You spend days writing a UIL description of your foot, the trajectory, the bullet and the intricate scrollwork on the ivory handles of the gun. When you finally get around to pulling the trigger, the gun jams.   Powerbuilder While attempting to load the gun you discover that the LoadGun system function is buggy; as a work around you tape the bullet to the outside of the gun and unsuccessfully attempt to fire it with a nail. In frustration you club your foot with the butt of the gun and explain to your client that this approximates the functionality of shooting yourself in the foot and that the next version of Powerbuilder will fix it.   Standard ML By the time you get your code to typecheck, you're using a shoot to foot yourself in the gun.   MUMPS You shoot 583149 AK-47 teflon-tipped, hollow-point, armour-piercing bullets into even-numbered toes on odd-numbered feet of everyone in the building -- with one line of code. Three weeks later you shoot yourself in the head rather than try to modify that line.   Java You locate the Gun class, but discover that the Bullet class is abstract, so you extend it and write the missing part of the implementation. Then you implement the ShootAble interface for your foot, and recompile the Foot class. The interface lets the bullet call the doDamage method on the Foot, so the Foot can damage itself in the most effective way. Now you run the program, and call the doShoot method on the instance of the Gun class. First the Gun creates an instance of Bullet, which calls the doFire method on the Gun. The Gun calls the hit(Bullet) method on the Foot, and the instance of Bullet is passed to the Foot. But this causes an IllegalHitByBullet exception to be thrown, and you die.   Unix You shoot yourself in the foot or % ls foot.c foot.h foot.o toe.c toe.o % rm * .o rm: .o: No such file or directory % ls %   370 JCL (alternative) You shoot yourself in the head just thinking about it.   DOS JCL You first find the building you're in in the phone book, then find your office number in the corporate phone book. Then you have to write this down, then describe, in cubits, your exact location, in relation to the door (right hand side thereof). Then you need to write down the location of the gun (loading it is a proprietary utility), then you load it, and the COBOL program, and run them, and, with luck, it may be run tonight.   VMS   $ MOUNT/DENSITY=.45/LABEL=BULLET/MESSAGE="BYE" BULLET::BULLET$GUN SYS$BULLET $ SET GUN/LOAD/SAFETY=OFF/SIGHT=NONE/HAND=LEFT/CHAMBER=1/ACTION=AUTOMATIC/ LOG/ALL/FULL SYS$GUN_3$DUA3:[000000]GUN.GNU $ SHOOT/LOG/AUTO SYS$GUN SYS$SYSTEM:[FOOT]FOOT.FOOT   %DCL-W-ACTIMAGE, error activating image GUN -CLI-E-IMGNAME, image file $3$DUA240:[GUN]GUN.EXE;1 -IMGACT-F-NOTNATIVE, image is not an OpenVMS Alpha AXP image or %SYS-F-FTSHT, foot shot (fifty lines of traceback omitted) sh,csh, etc You can't remember the syntax for anything, so you spend five hours reading manual pages, then your foot falls asleep. You shoot the computer and switch to C.   Apple System 7 Double click the gun icon and a window giving a selection for guns, target areas, plus balloon help with medical remedies, and assorted sound effects. Click "shoot" button and a small bomb appears with note "Error of Type 1 has occurred."   Windows 3.1 Double click the gun icon and wait. Eventually a window opens giving a selection for guns, target areas, plus balloon help with medical remedies, and assorted sound effects. Click "shoot" button and a small box appears with note "Unable to open Shoot.dll, check that path is correct."   Windows 95 Your gun is not compatible with this OS and you must buy an upgrade and install it before you can continue. Then you will be informed that you don't have enough memory.   CP/M I remember when shooting yourself in the foot with a BB gun was a big deal.   DOS You finally found the gun, but can't locate the file with the foot for the life of you.   MSDOS You shoot yourself in the foot, but can unshoot yourself with add-on software.   Access You try to point the gun at your foot, but it shoots holes in all your Borland distribution diskettes instead.   Paradox Not only can you shoot yourself in the foot, your users can too.   dBase You squeeze the trigger, but the bullet moves so slowly that by the time your foot feels the pain, you've forgotten why you shot yourself anyway. or You buy a gun. Bullets are only available from another company and are promised to work so you buy them. Then you find out that the next version of the gun is the one scheduled to actually shoot bullets.   DBase IV, V1.0 You pull the trigger, but it turns out that the gun was a poorly designed hand grenade and the whole building blows up.   SQL You cut your foot off, send it out to a service bureau and when it returns, it has a hole in it but will no longer fit the attachment at the end of your leg. or Insert into Foot Select Bullet >From Gun.Hand Where Chamber = 'LOADED' And Trigger = 'PULLED'   Clipper You grab a bullet, get ready to insert it in the gun so that you can shoot yourself in the foot and discover that the gun that the bullets fits has not yet been built, but should be arriving in the mail _REAL_SOON_NOW_. Oracle The menus for coding foot_shooting have not been implemented yet and you can't do foot shooting in SQL.   English You put your foot in your mouth, then bite it off. (For those who don't know, English is a McDonnell Douglas/PICK query language which allegedly requires 110% of system resources to run happily.) Revelation [an implementation of the PICK Operating System] You'll be able to shoot yourself in the foot just as soon as you figure out what all these bullets are for.   FlagShip Starting at the top of your head, you aim the gun at yourself repeatedly until, half an hour later, the gun is finally pointing at your foot and you pull the trigger. A new foot with a hole in it appears but you can't work out how to get rid of the old one and your gun doesn't work anymore.   FidoNet You put your foot in your mouth, then echo it internationally.   PicoSpan [a UNIX-based computer conferencing system] You can't shoot yourself in the foot because you're not a host. or (host variation) Whenever you shoot yourself in the foot, someone opens a topic in policy about it.   Internet You put your foot in your mouth, shoot it, then spam the bullet so that everybody gets shot in the foot.   troff rmtroff -ms -Hdrwp | lpr -Pwp2 & .*place bullet in footer .B .NR FT +3i .in 4 .bu Shoot! .br .sp .in -4 .br .bp NR HD -2i .*   Genetic Algorithms You create 10,000 strings describing the best way to shoot yourself in the foot. By the time the program produces the optimal solution, humans have evolved wings and the problem is moot.   CSP (Communicating Sequential Processes) You only fail to shoot everything that isn't your foot.   MS-SQL Server MS-SQL Server’s gun comes pre-loaded with an unlimited supply of Teflon coated bullets, and it only has two discernible features: the muzzle and the trigger. If that wasn't enough, MS-SQL Server also puts the gun in your hand, applies local anesthetic to the skin of your forefinger and stitches it to the gun's trigger. Meanwhile, another process has set up a spinal block to numb your lower body. It will then proceeded to surgically remove your foot, cryogenically freeze it for preservation, and attach it to the muzzle of the gun so that no matter where you aim, you will shoot your foot. In order to avoid shooting yourself in the foot, you need to unstitch your trigger finger, remove your foot from the muzzle of the gun, and have it surgically reattached. Then you probably want to get some crutches and go out to buy a book on SQL Server Performance Tuning.   Sybase Sybase's gun requires assembly, and you need to go out and purchase your own clip and bullets to load the gun. Assembly is complicated by the fact that Sybase has hidden the gun behind a big stack of reference manuals, but it hasn't told you where that stack is. While you were off finding the gun, assembling it, buying bullets, etc., Sybase was also busy surgically removing your foot and cryogenically freezing it for preservation. Instead of attaching it to the muzzle of the gun, though, it packed your foot on dry ice and sent it UPS-Ground to an unnamed hookah bar somewhere in the middle east. In order to shoot your foot, you must modify your gun with a GPS system for targeting and hire some guy named "Indy" to find the hookah bar and wire the coordinates back to you. By this time, you've probably become so daunted at the tasks stand between you and shooting your foot that you hire a guy who's read all the books on Sybase to help you shoot your foot. If you're lucky, he'll be smart enough both to find your foot and to stop you from shooting it.   Magic software You spend 1 week looking up the correct syntax for GUN. When you find it, you realise that GUN will not let you shoot in your own foot. It will allow you to shoot almost anything but your foot. You then decide to build your own gun. You can't use the standard barrel since this will only allow for standard bullets, which will not fire if the barrel is pointed at your foot. After four weeks, you have created your own custom gun. It blows up in your hand without warning, because you failed to initialise the safety catch and it doesn't know whether the initial state is "0", 0, NULL, "ZERO", 0.0, 0,0, "0.0", or "0,00". You fix the problem with your remaining hand by nesting 12 safety catches, and then decide to build the gun without safety catch. You then shoot the management and retire to a happy life where you code in languages that will allow you to shoot your foot in under 10 days.FirefoxLets you shoot yourself in as many feet as you'd like, while using multiple great addons! IEA moving target in terms of standard ammunition size and doesn't always work properly with non-Microsoft ammunition, so sometimes you shoot something other than your foot. However, it's the corporate world's standard foot-shooting apparatus. Hackers seem to enjoy rigging websites up to trigger cascading foot-shooting failures. Windows 98 About the same as Windows 95 in terms of overall bullet capacity and triggering mechanisms. Includes updated DirectShot API. A new version was released later on to support USB guns, Windows 98 SE.WPF:You get your baseball glove and a ball and you head out to your backyard, where you throw balls to your pitchback. Then your unkempt-haired-cargo-shorts-and-sandals-with-white-socks-wearing neighbor uses XAML to sculpt your arm into a gun, the ball into a bullet and the pitchback into your foot. By now, however, only the neighbor can get it to work and he's only around from 6:30 PM - 3:30 AM. LOGO: You very carefully lay out the trajectory of the bullet. Then you start the gun, which fires very slowly. You walk precisely to the point where the bullet will travel and wait, but just before it gets to you, your class time is up and one of the other kids has already used the system to hack into Sony's PS3 network. Flash: Someone has designed a beautiful-looking gun that anyone can shoot their feet with for free. It weighs six hundred pounds. All kinds of people are shooting themselves in the feet, and sending the link to everyone else so that they can too. That is, except for the criminals, who are all stealing iOS devices that the gun won't work with.APL: Its (mostly) all greek to me. Lisp: Place ((gun in ((hand sight (foot then shoot))))) (Lots of Insipid Stupid Parentheses)Apple OS/X and iOS Once a year, Steve Jobs returns from sick leave to tell millions of unwavering fans how they will be able to shoot themselves in the foot differently this year. They retweet and blog about it ad nauseam, and wait in line to be the first to experience "shoot different".Windows ME Usually fails, even at shooting you in the foot. Yo dawg, I heard you like shooting yourself in the foot. So I put a gun in your gun, so you can shoot yourself in the foot while you shoot yourself in the foot. (Okay, I'm not especially proud of this joke.) Windows 2000 Now you really do have to log in, before you are allowed to shoot yourself in the foot.Windows XPYou thought you learned your lesson: Don't use Windows ME. Then, along came this new creature, built on top of Windows NT! So you spend the next couple days installing antivirus software, patches and service packs, just so you can get that driver to install, and then proceed to shoot yourself in the foot. Windows Vista Newer! Glossier! Shootier! Windows 7 The bullets come out a lot smoother. Active Directory Each bullet now has an attached Bullet Identifier, and can be uniquely identified. Policies can be applied to dictate fragmentation, and the gun will occasionally have a confusing delay after the trigger has been pulled. PythonYou try to use import foot; foot.shoot() only to realize that's only available in 3.0, to which you can't yet upgrade from 2.7 because of all those extension libs lacking support. Solaris Shoots best when used on SPARC hardware, but still runs the trigger GUI under Java. After weeks of learning the appropriate STOP command to prevent the trigger from automatically being pressed on boot, you think you've got it under control. Then the one time you ever use dtrace, it hits a bug that fires the gun. MySQL The feature that allows you to shoot yourself in the foot has been in development for about 6 years, and they are adding it into the next version, which is coming out REAL SOON NOW, promise! But you can always check it out of source control and try it yourself (just not in any environment where data integrity is important because it will probably explode.) PostgreSQLAllows you to have a smug look on your face while you shoot yourself in the foot, because those MySQL guys STILL don't have that feature. NoSQL Barrel? Who needs a barrel? Just put the bullet on your foot, and strike it with a hammer. See? It's so much simpler and more efficient that way. You can even strike multiple bullets in one swing if you swing with a good enough arc, because hammers are easy to use. Getting them to synchronize is a little difficult, though.Eclipse There are about a dozen different packages for shooting yourself in the foot, with weird interdependencies on outdated components. Once you finally navigate the morass and get one installed, you then have something to look at while you shoot yourself in the foot with that package: You can watch the screen redraw.Outlook Makes it really easy to let everyone know you shot yourself in the foot!Shooting yourself in the foot using delegates.You really need to shoot yourself in the foot but you hate firearms (you don't want any dependency on the specifics of shooting) so you delegate it to somebody else. You don't care how it is done as long is shooting your foot. You can do it asynchronously in case you know you may faint so you are called back/slapped in the face by your shooter/friend (or background worker) when everything is done.C#You prepare the gun and the bullet, carefully modeling all of the physics of a bullet traveling through a foot. Just before you're about to pull the trigger, you stumble on System.Windows.BodyParts.Foot.ShootAt(System.Windows.Firearms.IGun gun) in the extended framework, realize you just wasted the entire afternoon, and shoot yourself in the head.PHP<?phprequire("foot_safety_check.php");?><!DOCTYPE HTML><html><head> <!--Lower!--><title>Shooting me in the foot</title></head> <body> <!--LOWER!!!--><leg> <!--OK, I made this one up...--><footer><?php echo (dungSift($_SERVER['HTTP_USER_AGENT'], "ie"))?("Your foot is safe, but you might want to wear a hard hat!"):("<div class=\"shot\">BANG!</div>"); ?></footer></leg> </body> </html>

  Read the article

• What approach to take for SIMD optimizations

  - by goldenmean

  Hi, I am trying to optimize below code for SIMD operations (8way/4way/2way SIMD whiechever possible and if it gives gains in performance) I am tryin to analyze it first on paper to understand the algorithm used. How can i optimize it for SIMD:- void idct(uint8_t *dst, int stride, int16_t *input, int type) { int16_t *ip = input; uint8_t *cm = ff_cropTbl + MAX_NEG_CROP; int A, B, C, D, Ad, Bd, Cd, Dd, E, F, G, H; int Ed, Gd, Add, Bdd, Fd, Hd; int i; /* Inverse DCT on the rows now */ for (i = 0; i < 8; i++) { /* Check for non-zero values */ if ( ip[0] | ip[1] | ip[2] | ip[3] | ip[4] | ip[5] | ip[6] | ip[7] ) { A = M(xC1S7, ip[1]) + M(xC7S1, ip[7]); B = M(xC7S1, ip[1]) - M(xC1S7, ip[7]); C = M(xC3S5, ip[3]) + M(xC5S3, ip[5]); D = M(xC3S5, ip[5]) - M(xC5S3, ip[3]); Ad = M(xC4S4, (A - C)); Bd = M(xC4S4, (B - D)); Cd = A + C; Dd = B + D; E = M(xC4S4, (ip[0] + ip[4])); F = M(xC4S4, (ip[0] - ip[4])); G = M(xC2S6, ip[2]) + M(xC6S2, ip[6]); H = M(xC6S2, ip[2]) - M(xC2S6, ip[6]); Ed = E - G; Gd = E + G; Add = F + Ad; Bdd = Bd - H; Fd = F - Ad; Hd = Bd + H; /* Final sequence of operations over-write original inputs. */ ip[0] = (int16_t)(Gd + Cd) ; ip[7] = (int16_t)(Gd - Cd ); ip[1] = (int16_t)(Add + Hd); ip[2] = (int16_t)(Add - Hd); ip[3] = (int16_t)(Ed + Dd) ; ip[4] = (int16_t)(Ed - Dd ); ip[5] = (int16_t)(Fd + Bdd); ip[6] = (int16_t)(Fd - Bdd); } ip += 8; /* next row */ } ip = input; for ( i = 0; i < 8; i++) { /* Check for non-zero values (bitwise or faster than ||) */ if ( ip[1 * 8] | ip[2 * 8] | ip[3 * 8] | ip[4 * 8] | ip[5 * 8] | ip[6 * 8] | ip[7 * 8] ) { A = M(xC1S7, ip[1*8]) + M(xC7S1, ip[7*8]); B = M(xC7S1, ip[1*8]) - M(xC1S7, ip[7*8]); C = M(xC3S5, ip[3*8]) + M(xC5S3, ip[5*8]); D = M(xC3S5, ip[5*8]) - M(xC5S3, ip[3*8]); Ad = M(xC4S4, (A - C)); Bd = M(xC4S4, (B - D)); Cd = A + C; Dd = B + D; E = M(xC4S4, (ip[0*8] + ip[4*8])) + 8; F = M(xC4S4, (ip[0*8] - ip[4*8])) + 8; if(type==1){ //HACK E += 16*128; F += 16*128; } G = M(xC2S6, ip[2*8]) + M(xC6S2, ip[6*8]); H = M(xC6S2, ip[2*8]) - M(xC2S6, ip[6*8]); Ed = E - G; Gd = E + G; Add = F + Ad; Bdd = Bd - H; Fd = F - Ad; Hd = Bd + H; /* Final sequence of operations over-write original inputs. */ if(type==0){ ip[0*8] = (int16_t)((Gd + Cd ) >> 4); ip[7*8] = (int16_t)((Gd - Cd ) >> 4); ip[1*8] = (int16_t)((Add + Hd ) >> 4); ip[2*8] = (int16_t)((Add - Hd ) >> 4); ip[3*8] = (int16_t)((Ed + Dd ) >> 4); ip[4*8] = (int16_t)((Ed - Dd ) >> 4); ip[5*8] = (int16_t)((Fd + Bdd ) >> 4); ip[6*8] = (int16_t)((Fd - Bdd ) >> 4); }else if(type==1){ dst[0*stride] = cm[(Gd + Cd ) >> 4]; dst[7*stride] = cm[(Gd - Cd ) >> 4]; dst[1*stride] = cm[(Add + Hd ) >> 4]; dst[2*stride] = cm[(Add - Hd ) >> 4]; dst[3*stride] = cm[(Ed + Dd ) >> 4]; dst[4*stride] = cm[(Ed - Dd ) >> 4]; dst[5*stride] = cm[(Fd + Bdd ) >> 4]; dst[6*stride] = cm[(Fd - Bdd ) >> 4]; }else{ dst[0*stride] = cm[dst[0*stride] + ((Gd + Cd ) >> 4)]; dst[7*stride] = cm[dst[7*stride] + ((Gd - Cd ) >> 4)]; dst[1*stride] = cm[dst[1*stride] + ((Add + Hd ) >> 4)]; dst[2*stride] = cm[dst[2*stride] + ((Add - Hd ) >> 4)]; dst[3*stride] = cm[dst[3*stride] + ((Ed + Dd ) >> 4)]; dst[4*stride] = cm[dst[4*stride] + ((Ed - Dd ) >> 4)]; dst[5*stride] = cm[dst[5*stride] + ((Fd + Bdd ) >> 4)]; dst[6*stride] = cm[dst[6*stride] + ((Fd - Bdd ) >> 4)]; } } else { if(type==0){ ip[0*8] = ip[1*8] = ip[2*8] = ip[3*8] = ip[4*8] = ip[5*8] = ip[6*8] = ip[7*8] = ((xC4S4 * ip[0*8] + (IdctAdjustBeforeShift<<16))>>20); }else if(type==1){ dst[0*stride]= dst[1*stride]= dst[2*stride]= dst[3*stride]= dst[4*stride]= dst[5*stride]= dst[6*stride]= dst[7*stride]= cm[128 + ((xC4S4 * ip[0*8] + (IdctAdjustBeforeShift<<16))>>20)]; }else{ if(ip[0*8]){ int v= ((xC4S4 * ip[0*8] + (IdctAdjustBeforeShift<<16))>>20); dst[0*stride] = cm[dst[0*stride] + v]; dst[1*stride] = cm[dst[1*stride] + v]; dst[2*stride] = cm[dst[2*stride] + v]; dst[3*stride] = cm[dst[3*stride] + v]; dst[4*stride] = cm[dst[4*stride] + v]; dst[5*stride] = cm[dst[5*stride] + v]; dst[6*stride] = cm[dst[6*stride] + v]; dst[7*stride] = cm[dst[7*stride] + v]; } } } ip++; /* next column */ dst++; } }

  Read the article

• How to print PCL Directly to the printer? Vb.net VS 2010

  - by Justin

  Good day, I've been trying to upgrade an old Print Program that prints raw pcl directly to the printer. The print program takes a PCL Mask and a PCL Batch Spool File (just pcl with page turn commands, I think) merges them and sends them off to the printer. I'm able to send to the Printer a file stream of PCL but I get mixed results and i do not understand why printing is so difficult under .net. I mean yes there is the PrintDocument class, but to print PCL... Let's just say I'm ready to detach my printer from the network and burn it a live. Here is my class PrintDirect (rather a hybrid class) Imports System Imports System.Text Imports System.Runtime.InteropServices <StructLayout(LayoutKind.Sequential)> _ Public Structure DOCINFO <MarshalAs(UnmanagedType.LPWStr)> _ Public pDocName As String <MarshalAs(UnmanagedType.LPWStr)> _ Public pOutputFile As String <MarshalAs(UnmanagedType.LPWStr)> _ Public pDataType As String End Structure 'DOCINFO Public Class PrintDirect <DllImport("winspool.drv", CharSet:=CharSet.Unicode, ExactSpelling:=False, CallingConvention:=CallingConvention.StdCall)> _ Public Shared Function OpenPrinter(ByVal pPrinterName As String, ByRef phPrinter As IntPtr, ByVal pDefault As Integer) As Long End Function <DllImport("winspool.drv", CharSet:=CharSet.Unicode, ExactSpelling:=False, CallingConvention:=CallingConvention.StdCall)> _ Public Shared Function StartDocPrinter(ByVal hPrinter As IntPtr, ByVal Level As Integer, ByRef pDocInfo As DOCINFO) As Long End Function <DllImport("winspool.drv", CharSet:=CharSet.Unicode, ExactSpelling:=True, CallingConvention:=CallingConvention.StdCall)> _ Public Shared Function StartPagePrinter(ByVal hPrinter As IntPtr) As Long End Function <DllImport("winspool.drv", CharSet:=CharSet.Ansi, ExactSpelling:=True, CallingConvention:=CallingConvention.StdCall)> _ Public Shared Function WritePrinter(ByVal hPrinter As IntPtr, ByVal data As String, ByVal buf As Integer, ByRef pcWritten As Integer) As Long End Function <DllImport("winspool.drv", CharSet:=CharSet.Unicode, ExactSpelling:=True, CallingConvention:=CallingConvention.StdCall)> _ Public Shared Function EndPagePrinter(ByVal hPrinter As IntPtr) As Long End Function <DllImport("winspool.drv", CharSet:=CharSet.Unicode, ExactSpelling:=True, CallingConvention:=CallingConvention.StdCall)> _ Public Shared Function EndDocPrinter(ByVal hPrinter As IntPtr) As Long End Function <DllImport("winspool.drv", CharSet:=CharSet.Unicode, ExactSpelling:=True, CallingConvention:=CallingConvention.StdCall)> _ Public Shared Function ClosePrinter(ByVal hPrinter As IntPtr) As Long End Function 'Helps uses to work with the printer Public Class PrintJob ''' <summary> ''' The address of the printer to print to. ''' </summary> ''' <remarks></remarks> Public PrinterName As String = "" Dim lhPrinter As New System.IntPtr() ''' <summary> ''' The object deriving from the Win32 API, Winspool.drv. ''' Use this object to overide the settings defined in the PrintJob Class. ''' </summary> ''' <remarks>Only use this when absolutly nessacary.</remarks> Public OverideDocInfo As New DOCINFO() ''' <summary> ''' The PCL Control Character or the ascii escape character. \x1b ''' </summary> ''' <remarks>ChrW(27)</remarks> Public Const PCL_Control_Character As Char = ChrW(27) ''' <summary> ''' Opens a connection to a printer, if false the connection could not be established. ''' </summary> ''' <returns></returns> ''' <remarks></remarks> Public Function OpenPrint() As Boolean Dim rtn_val As Boolean = False PrintDirect.OpenPrinter(PrinterName, lhPrinter, 0) If Not lhPrinter = 0 Then rtn_val = True End If Return rtn_val End Function ''' <summary> ''' The name of the Print Document. ''' </summary> ''' <value></value> ''' <returns></returns> ''' <remarks></remarks> Public Property DocumentName As String Get Return OverideDocInfo.pDocName End Get Set(ByVal value As String) OverideDocInfo.pDocName = value End Set End Property ''' <summary> ''' The type of Data that will be sent to the printer. ''' </summary> ''' <value>Send the print data type, usually "RAW" or "LPR". To overide use the OverideDocInfo Object</value> ''' <returns>The DataType as it was provided, if it is not part of the enumeration it is set to "UNKNOWN".</returns> ''' <remarks></remarks> Public Property DocumentDataType As PrintDataType Get Select Case OverideDocInfo.pDataType.ToUpper Case "RAW" Return PrintDataType.RAW Case "LPR" Return PrintDataType.LPR Case Else Return PrintDataType.UNKOWN End Select End Get Set(ByVal value As PrintDataType) OverideDocInfo.pDataType = [Enum].GetName(GetType(PrintDataType), value) End Set End Property Public Property DocumentOutputFile As String Get Return OverideDocInfo.pOutputFile End Get Set(ByVal value As String) OverideDocInfo.pOutputFile = value End Set End Property Enum PrintDataType UNKOWN = 0 RAW = 1 LPR = 2 End Enum ''' <summary> ''' Initializes the printing matrix ''' </summary> ''' <param name="PrintLevel">I have no idea what the hack this is...</param> ''' <remarks></remarks> Public Sub OpenDocument(Optional ByVal PrintLevel As Integer = 1) PrintDirect.StartDocPrinter(lhPrinter, PrintLevel, OverideDocInfo) End Sub ''' <summary> ''' Starts the next page. ''' </summary> ''' <remarks></remarks> Public Sub StartPage() PrintDirect.StartPagePrinter(lhPrinter) End Sub ''' <summary> ''' Writes a string to the printer, can be used to write out a section of the document at a time. ''' </summary> ''' <param name="data">The String to Send out to the Printer.</param> ''' <returns>The pcWritten as an integer, 0 may mean the writter did not write out anything.</returns> ''' <remarks>Warning the buffer is automatically created by the lenegth of the string.</remarks> Public Function WriteToPrinter(ByVal data As String) As Integer Dim pcWritten As Integer = 0 PrintDirect.WritePrinter(lhPrinter, data, data.Length - 1, pcWritten) Return pcWritten End Function Public Sub EndPage() PrintDirect.EndPagePrinter(lhPrinter) End Sub Public Sub CloseDocument() PrintDirect.EndDocPrinter(lhPrinter) End Sub Public Sub ClosePrint() PrintDirect.ClosePrinter(lhPrinter) End Sub ''' <summary> ''' Opens a connection to a printer and starts a new document. ''' </summary> ''' <returns>If false the connection could not be established. </returns> ''' <remarks></remarks> Public Function Open() As Boolean Dim rtn_val As Boolean = False rtn_val = OpenPrint() If rtn_val Then OpenDocument() End If Return rtn_val End Function ''' <summary> ''' Closes the document and closes the connection to the printer. ''' </summary> ''' <remarks></remarks> Public Sub Close() CloseDocument() ClosePrint() End Sub End Class End Class 'PrintDirect Here is how I print my file. I'm simple printing the PCL Masks, to show proof of concept. But I can't even do that. I can effectively create PCL and send it the printer without reading the file and it works fine... Plus I get mixed results with different stream reader text encoding as well. Dim pJob As New PrintDirect.PrintJob pJob.DocumentName = " test doc" pJob.DocumentDataType = PrintDirect.PrintJob.PrintDataType.RAW pJob.PrinterName = sPrinter.GetDevicePath '//This is where you'd stick your device name, sPrinter stands for Selected Printer from a dropdown (combobox). 'pJob.DocumentOutputFile = "C:\temp\test-spool.txt" If Not pJob.OpenPrint() Then MsgBox("Unable to connect to " & pJob.PrinterName, MsgBoxStyle.OkOnly, "Print Error") Exit Sub End If pJob.OpenDocument() pJob.StartPage() Dim sr As New IO.StreamReader(Me.txtFile.Text, Text.Encoding.ASCII) '//I've got best results with ASCII before, but only mized. Dim line As String = sr.ReadLine 'Fix for fly code on first run 'If line = 27 Then line = PrintDirect.PrintJob.PCL_Control_Character Do While (Not line Is Nothing) pJob.WriteToPrinter(line) line = sr.ReadLine Loop 'pJob.WriteToPrinter(ControlChars.FormFeed) pJob.EndPage() pJob.CloseDocument() sr.Close() sr.Dispose() sr = Nothing pJob.Close() I was able to get to print the mask, in the morning... now I'm getting strange printer characters scattered through 5 pages... I'm totally clueless. I must have changed something or the printer is at fault. You can access my test Check Mask, here http://kscserver.com/so/chk_mask.zip .

  Read the article

• Silverlight 4 + WCF RIA - Data Service Design Best Practices

  - by Chadd Nervig

  Hey all. I realize this is a rather long question, but I'd really appreciate any help from anyone experienced with RIA services. Thanks! I'm working on a Silverlight 4 app that views data from the server. I'm relatively inexperienced with RIA Services, so have been working through the tasks of getting the data I need down to the client, but every new piece I add to the puzzle seems to be more and more problematic. I feel like I'm missing some basic concepts here, and it seems like I'm just 'hacking' pieces on, in time-consuming ways, each one breaking the previous ones as I try to add them. I'd love to get the feedback of developers experienced with RIA services, to figure out the intended way to do what I'm trying to do. Let me lay out what I'm trying to do: First, the data. The source of this data is a variety of sources, primarily created by a shared library which reads data from our database, and exposes it as POCOs (Plain Old CLR Objects). I'm creating my own POCOs to represent the different types of data I need to pass between server and client. DataA - This app is for viewing a certain type of data, lets call DataA, in near-realtime. Every 3 minutes, the client should pull data down from the server, of all the new DataA since the last time it requested data. DataB - Users can view the DataA objects in the app, and may select one of them from the list, which displays additional details about that DataA. I'm bringing these extra details down from the server as DataB. DataC - One of the things that DataB contains is a history of a couple important values over time. I'm calling each data point of this history a DataC object, and each DataB object contains many DataCs. The Data Model - On the server side, I have a single DomainService: [EnableClientAccess] public class MyDomainService : DomainService { public IEnumerable<DataA> GetDataA(DateTime? startDate) { /*Pieces together the DataAs that have been created since startDate, and returns them*/ } public DataB GetDataB(int dataAID) { /*Looks up the extended info for that dataAID, constructs a new DataB with that DataA's data, plus the extended info (with multiple DataCs in a List<DataC> property on the DataB), and returns it*/ } //Not exactly sure why these are here, but I think it //wouldn't compile without them for some reason? The data //is entirely read-only, so I don't need to update. public void UpdateDataA(DataA dataA) { throw new NotSupportedException(); } public void UpdateDataB(DataB dataB) { throw new NotSupportedException(); } } The classes for DataA/B/C look like this: [KnownType(typeof(DataB))] public partial class DataA { [Key] [DataMember] public int DataAID { get; set; } [DataMember] public decimal MyDecimalA { get; set; } [DataMember] public string MyStringA { get; set; } [DataMember] public DataTime MyDateTimeA { get; set; } } public partial class DataB : DataA { [Key] [DataMember] public int DataAID { get; set; } [DataMember] public decimal MyDecimalB { get; set; } [DataMember] public string MyStringB { get; set; } [Include] //I don't know which of these, if any, I need? [Composition] [Association("DataAToC","DataAID","DataAID")] public List<DataC> DataCs { get; set; } } public partial class DataC { [Key] [DataMember] public int DataAID { get; set; } [Key] [DataMember] public DateTime Timestamp { get; set; } [DataMember] public decimal MyHistoricDecimal { get; set; } } I guess a big question I have here is... Should I be using Entities instead of POCOs? Are my classes constructed correctly to be able to pass the data down correctly? Should I be using Invoke methods instead of Query (Get) methods on the DomainService? On the client side, I'm having a number of issues. Surprisingly, one of my biggest ones has been threading. I didn't expect there to be so many threading issues with MyDomainContext. What I've learned is that you only seem to be able to create MyDomainContextObjects on the UI thread, all of the queries you can make are done asynchronously only, and that if you try to fake doing it synchronously by blocking the calling thread until the LoadOperation finishes, you have to do so on a background thread, since it uses the UI thread to make the query. So here's what I've got so far. The app should display a stream of the DataA objects, spreading each 3min chunk of them over the next 3min (so they end up displayed 3min after the occurred, looking like a continuous stream, but only have to be downloaded in 3min bursts). To do this, the main form initializes, creates a private MyDomainContext, and starts up a background worker, which continuously loops in a while(true). On each loop, it checks if it has any DataAs left over to display. If so, it displays that Data, and Thread.Sleep()s until the next DataA is scheduled to be displayed. If it's out of data, it queries for more, using the following methods: public DataA[] GetDataAs(DateTime? startDate) { _loadOperationGetDataACompletion = new AutoResetEvent(false); LoadOperation<DataA> loadOperationGetDataA = null; loadOperationGetDataA = _context.Load(_context.GetDataAQuery(startDate), System.ServiceModel.DomainServices.Client.LoadBehavior.RefreshCurrent, false); loadOperationGetDataA.Completed += new EventHandler(loadOperationGetDataA_Completed); _loadOperationGetDataACompletion.WaitOne(); List<DataA> dataAs = new List<DataA>(); foreach (var dataA in loadOperationGetDataA.Entities) dataAs.Add(dataA); return dataAs.ToArray(); } private static AutoResetEvent _loadOperationGetDataACompletion; private static void loadOperationGetDataA_Completed(object sender, EventArgs e) { _loadOperationGetDataACompletion.Set(); } Seems kind of clunky trying to force it into being synchronous, but since this already is on a background thread, I think this is OK? So far, everything actually works, as much of a hack as it seems like it may be. It's important to note that if I try to run that code on the UI thread, it locks, because it waits on the WaitOne() forever, locking the thread, so it can't make the Load request to the server. So once the data is displayed, users can click on one as it goes by to fill a details pane with the full DataB data about that object. To do that, I have the the details pane user control subscribing to a selection event I have setup, which gets fired when the selection changes (on the UI thread). I use a similar technique there, to get the DataB object: void SelectionService_SelectedDataAChanged(object sender, EventArgs e) { DataA dataA = /*Get the selected DataA*/; MyDomainContext context = new MyDomainContext(); var loadOperationGetDataB = context.Load(context.GetDataBQuery(dataA.DataAID), System.ServiceModel.DomainServices.Client.LoadBehavior.RefreshCurrent, false); loadOperationGetDataB.Completed += new EventHandler(loadOperationGetDataB_Completed); } private void loadOperationGetDataB_Completed(object sender, EventArgs e) { this.DataContext = ((LoadOperation<DataB>)sender).Entities.SingleOrDefault(); } Again, it seems kinda hacky, but it works... except on the DataB that it loads, the DataCs list is empty. I've tried all kinds of things there, and I don't see what I'm doing wrong to allow the DataCs to come down with the DataB. I'm about ready to make a 3rd query for the DataCs, but that's screaming even more hackiness to me. It really feels like I'm fighting against the grain here, like I'm doing this in an entirely unintended way. If anyone could offer any assistance, and point out what I'm doing wrong here, I'd very much appreciate it! Thanks!

  Read the article

• Silverlight 2.0 - Can't get the text wrapping behaviour that I want

  - by Anthony

  I am having trouble getting Silverlight 2.0 to lay out text exactly how I want. I want text with line breaks and embedded links, with wrapping, like HTML text in a web page. Here's the closest that I have come: <UserControl x:Class="FlowPanelTest.Page" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:Controls="clr-namespace:Microsoft.Windows.Controls;assembly=Microsoft.Windows.Controls" Width="250" Height="300"> <Border BorderBrush="Black" BorderThickness="2" > <Controls:WrapPanel> <TextBlock x:Name="tb1" TextWrapping="Wrap">Short text. </TextBlock> <TextBlock x:Name="tb2" TextWrapping="Wrap">A bit of text. </TextBlock> <TextBlock x:Name="tb3" TextWrapping="Wrap">About half of a line of text.</TextBlock> <TextBlock x:Name="tb4" TextWrapping="Wrap">More than half a line of longer text.</TextBlock> <TextBlock x:Name="tb5" TextWrapping="Wrap">More than one line of text, so it will wrap onto the following line.</TextBlock> </Controls:WrapPanel> </Border> </UserControl> But the issue is that although the text blocks tb1 and tb2 will go onto the same line because there is room enough for them completely, tb3 onwards will not start on the same line as the previous block, even though it will wrap onto following lines. I want each text block to start where the previous one ends, on the same line. I want to put click event handlers on some of the text. I also want paragraph breaks. Essentially I'm trying to work around the lack of FlowDocument and Hyperlink controls in Silverlight 2.0's subset of XAML. To answer the questions posed in the answers: Why not use runs for the non-clickable text? If I just use individual TextBlocks only on the clickable text, then those bits of text will still suffer from the wrapping problem illustrated above. And the TextBlock just before the link, and the TextBlock just after. Essentially all of it. It doesn't look like I have many opportunities for putting multiple runs in the same TextBlock. Dividing the links from the other text with RegExs and loops is not the issue at all, the issue is display layout. Why not put each word in an individual TextBlock in a WrapPanel Aside from being an ugly hack, this does not play at all well with linebreaks - the layout is incorrect. It would also make the underline style of linked text into a broken line. Here's an example with each word in its own TextBlock. Try running it, note that the linebreak isn't shown in the right place at all. <UserControl x:Class="SilverlightApplication2.Page" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:Controls="clr-namespace:Microsoft.Windows.Controls;assembly=Microsoft.Windows.Controls" Width="300" Height="300"> <Controls:WrapPanel> <TextBlock TextWrapping="Wrap">Short1 </TextBlock> <TextBlock TextWrapping="Wrap">Longer1 </TextBlock> <TextBlock TextWrapping="Wrap">Longerest1 </TextBlock> <TextBlock TextWrapping="Wrap"> <Run>Break</Run> <LineBreak></LineBreak> </TextBlock> <TextBlock TextWrapping="Wrap">Short2</TextBlock> <TextBlock TextWrapping="Wrap">Longer2</TextBlock> <TextBlock TextWrapping="Wrap">Longerest2</TextBlock> <TextBlock TextWrapping="Wrap">Short3</TextBlock> <TextBlock TextWrapping="Wrap">Longer3</TextBlock> <TextBlock TextWrapping="Wrap">Longerest3</TextBlock> </Controls:WrapPanel> </UserControl> What about The LinkLabelControl as here and here. It has the same problems as the approach above, since it's much the same. Try running the sample, and make the link text longer and longer until it wraps. Note that the link starts on a new line, which it shouldn't. Make the link text even longer, so that the link text is longer than a line. Note that it doesn't wrap at all, it cuts off. This control doesn't handle line breaks and paragraph breaks either. Why not put the text all in runs, detect clicks on the containing TextBlock and work out which run was clicked Runs do not have mouse events, but the containing TextBlock does. I can't find a way to check if the run is under the mouse (IsMouseOver is not present in SilverLight) or to find the bounding geometry of the run (no clip property). There is VisualTreeHelper.FindElementsInHostCoordinates() The code below uses VisualTreeHelper.FindElementsInHostCoordinates to get the controls under the click. The output lists the TextBlock but not the Run, since a Run is not a UiElement. private void theText_MouseLeftButtonDown(object sender, System.Windows.Input.MouseButtonEventArgs e) { // get the elements under the click UIElement uiElementSender = sender as UIElement; Point clickPos = e.GetPosition(uiElementSender); var UiElementsUnderClick = VisualTreeHelper.FindElementsInHostCoordinates(clickPos, uiElementSender); // show the controls string outputText = ""; foreach (var uiElement in UiElementsUnderClick) { outputText += uiElement.GetType().ToString() + "\n"; } this.outText.Text = outputText; } Use an empty text block with a margin to space following content onto a following line I'm still thinking about this one. How do you calculate the right width for a line-breaking block to force following content onto the following line? Too short and the following content will still be on the same line, at the right. Too long and the "linebreak" will be on the following line, with content after it. You would have to resize the breaks when the control is resized. Some of the code for this is: TextBlock lineBreak = new TextBlock(); lineBreak.TextWrapping = TextWrapping.Wrap; lineBreak.Text = " "; // need adaptive width lineBreak.Margin = new Thickness(0, 0, 200, 0);

  Read the article

• Users using Perl script to bypass Squid Proxy

  - by mk22

  The users on our network have been using a perl script to bypass our Squid proxy restrictions. Is there any way we can block this script from working?? #!/usr/bin/perl ######################################################################## # (c) 2008 Indika Bandara Udagedara # [email protected] # http://indikabandara19.blogspot.com # # ---------- # LICENCE # ---------- # This work is protected under GNU GPL # It simply says # " you are hereby granted to do whatever you want with this # except claiming you wrote this." # # # ---------- # README # ---------- # A simple tool to download via http proxies which enforce a download # size limit. Requires curl. # This is NOT a hack. This uses the absolutely legal HTTP/1.1 spec # Tested only for squid-2.6. Only squids will work with this(i think) # Please read the verbose README provided kindly by Rahadian Pratama # if u r on cygwin and think this documentation is not enough :) # # The newest version of pget is available at # http://indikabandara.no-ip.com/~indika/pget # # ---------- # USAGE # ---------- # + Edit below configurations(mainly proxy) # + First run with -i <file> giving a sample file of same type that # you are going to download. Doing this once is enough. # eg. to download '.tar' files first run with # pget -i my.tar ('my.tar' should be a real file) # + Run with # pget -g <URL> # # ######################################################################## ######################################################################## # CONFIGURATIONS - CHANGE THESE FREELY ######################################################################## # *magic* file # pls set absolute path if in cygwin my $_extFile = "./pget.ext" ; # download in chunks of below size my $_chunkSize = 1024*1024; # in Bytes # the proxy that troubles you my $_proxy = "192.168.0.2:3128"; # proxy URL:port my $_proxy_auth = "user:pass"; # proxy user:pass # whereis curl # pls set absolute path if in cygwin my $_curl = "/usr/bin/curl"; ######################################################################## # EDIT BELOW ONLY IF YOU KNOW WHAT YOU ARE DOING ######################################################################## use warnings; my $_version = "0.1.0"; PrintBanner(); if (@ARGV == 0) { PrintHelp(); exit; } PrimaryValidations(); my $val; while(scalar(@ARGV)) { my $arg = shift(@ARGV); if($arg eq '-h') { PrintHelp(); } elsif($arg eq '-i') { $val = shift(@ARGV); if (!defined($val)) { printf("-i option requires a filename\n"); exit; } Init($val); } elsif($arg eq '-g') { $val = shift(@ARGV); if (!defined($val)) { printf("-g option requires a URL\n"); exit; } GetURL($val); } elsif($arg eq '-c') { $val = shift(@ARGV); if (!defined($val)) { printf("-c option requires a URL\n"); exit; } ContinueURL($val); } else { printf ("Unknown option %s\n", $arg); PrintHelp(); } } sub GetURL { my ($URL) = @_; chomp($URL); my $fileName = GetFileName($URL); my %mapExt; my $first; my $readLen; my $ext = GetExt($fileName); ReadMap($_extFile, \%mapExt); if ( exists($mapExt{$ext})) { $first = $mapExt{$ext}; GetFile($URL, $first, $fileName, 0); } else { die "Unknown ext in $fileName. Rerun with -i <fileName>"; } } sub ContinueURL { my ($URL) = @_; chomp($URL); my $fileName = GetFileName($URL); my $fileSize = 0; $fileSize = -s $fileName; printf("Size = %d\n", $fileSize); my $first = -1; if ( $fileSize > 0 ) { $fileSize -= 1; GetFile($URL, $first, $fileName, $fileSize); } else { GetURL($URL); } } sub Init { my ($fileName) = @_; my ($key, $value); my %mapExt; my $ext = GetExt($fileName); if ( $ext eq "") { die "Cannot get ext of \'$fileName\'"; } ReadMap($_extFile, \%mapExt); my $b = GetFirst($fileName); $mapExt{$ext} = $b; WriteMap($_extFile, \%mapExt); print "I handle\n"; while ( ($key, $value) = each(%mapExt) ) { print "\t$key -> $value\n"; } } sub GetExt { my ($name) = @_; my @x = split(/\./, $name); my $ext = ""; if (@x != 1) { $ext = pop @x; } return $ext; } sub ReadMap { my($fileName, $mapRef) = @_; my $f; my @arr; open($f, '<', $fileName) or die "Couldn't open $fileName"; my %map = %{$mapRef}; while (<$f>) { my $line = $_; chomp($line); @arr = split(/[ \t]+/, $line, 2); $mapRef->{ $arr[0]} = $arr[1]; } printf("known ext\n"); while (($key, $value) = each(%$mapRef)) { print("$key, $value\n"); } close($f); } sub WriteMap { my ($fileName, $mapRef) = @_; my $f; my @arr; open($f, '>', $fileName) or die "Couldn't open $fileName"; my ($k, $v); while( ($k, $v) = each(%{$mapRef})) { print $f "$k" . "\t$v\n"; } close($f); } sub PrintHelp { print "usage: -h Print this help -i <filename> Initialize for this filetype -g <URL> Get this URL\n -c <URL> Continue this URL\n" } sub GetFirst { my ($fileName) = @_; my $f; open($f, "<$fileName") or die "Couldn't open $fileName"; my $buffer = ""; my $first = -1; binmode($f); sysread($f, $buffer, 1, 0); close($f); $first = ord($buffer); return $first; } sub GetFirstFromMap { } sub GetFileName { my ($URL) = @_; my @x = split(/\//, $URL); my $fileName = pop @x; return $fileName; } sub GetChunk { my ($URL, $file, $offset, $readLen) = @_; my $end = $offset + $_chunkSize - 1; my $curlCmd = "$_curl -x $_proxy -u $_proxy_auth -r $offset-$end -# \"$URL\""; print "$curlCmd\n"; my $buff = `$curlCmd`; ${$readLen} = syswrite($file, $buff, length($buff)); } sub GetFile { my ($URL, $first, $outFile, $fileSize) = @_; my $readLen = 0; my $start = $fileSize + 1; my $file; open($file, "+>>$outFile") or die "Couldn't open $outFile to write"; if ($fileSize <= 0) { my $uc = pack("C", $first); syswrite ($file, $uc, 1); } do { GetChunk($URL, $file, $start ,\$readLen); $start = $start + $_chunkSize; $fileSize += $readLen; }while ($readLen == $_chunkSize); printf("Downloaded %s(%d bytes).\n", $outFile, $fileSize); close($file); } sub PrintBanner { printf ("pget version %s\n", $_version); printf ("There is absolutely NO WARRANTY for pget.\n"); printf ("Use at your own risk. You have been warned.\n\n"); } sub PrimaryValidations { unless( -e "$_curl") { printf("ERROR:curl is not at %s. Pls install or provide correct path.\n", $_curl); exit; } unless( -e "$_extFile") { printf("extFile is not at %s. Creating one\n", $_extFile); `touch $_extFile`; } if ( $_chunkSize <= 0) { printf ("Invalid chunk size. Using 1Mb as default.\n"); $_chunkSize = 1024*1024; } }

  Read the article

• What sort of loop structure to compare checkbox matrix with Google Maps markers?

  - by Kirkman14

  I'm trying to build a map of trails around my town. I'm using an XML file to hold all the trail data. For each marker, I have categories like "surface," "difficulty," "uses," etc. I have seen many examples of Google Maps that use checkboxes to show markers by category. However these examples are usually very simple: maybe three different checkboxes. What's different on my end is that I have multiple categories, and within each category there are several possible values. So, a particular trail might have "use" values of "hiking," "biking," "jogging," and "equestrian" because all are allowed. I put together one version, which you can see here: http://www.joshrenaud.com/pd/trails_withcheckboxes3.html In this version, any trail that has any value checked by the user will be displayed on the map. This version works. (although I should point out there is a bug where despite only one category being checked on load, all markers display anyway. After your first click on any checkbox, the map will work properly) However I now realize it's not quite what I want. I want to change it so that it will display only markers that match ALL the values that are checked (rather than ANY, which is what the example above does). I took a hack at this. You can see the result online, but I can't type a link to it because I am new user. Change the "3" in the URL above to a "4" to see it. My questions are about this SECOND url. (trails_withcheckboxes4.html) It doesn't work. I am pretty new to Javascript, so I am sure I have done something totally wrong, but I can't figure out what. My specific questions: Does anyone see anything glaringly obvious that is keeping my second example from working? If not, could someone just suggest what sort of loop structure I would need to build to compare the several arrays of checkboxes with the several arrays of values on any given marker? Here is some of the relevant code, although you can just view source on the examples above to see the whole thing: function createMarker(point,surface,difficulty,use,html) { var marker = new GMarker(point,GIcon); marker.mysurface = surface; marker.mydifficulty = difficulty; marker.myuse = use; GEvent.addListener(marker, "click", function() { marker.openInfoWindowHtml(html); }); gmarkers.push(marker); return marker; } function show() { hide(); var surfaceChecked = []; var difficultyChecked = []; var useChecked = []; var j=0; // okay, let's run through the checkbox elements and make arrays to serve as holders of any values the user has checked. for (i=0; i<surfaceArray.length; i++) { if (document.getElementById('surface'+surfaceArray[i]).checked == true) { surfaceChecked[j] = surfaceArray[i]; j++; } } j=0; for (i=0; i<difficultyArray.length; i++) { if (document.getElementById('difficulty'+difficultyArray[i]).checked == true) { difficultyChecked[j] = difficultyArray[i]; j++; } } j=0; for (i=0; i<useArray.length; i++) { if (document.getElementById('use'+useArray[i]).checked == true) { useChecked[j] = useArray[i]; j++; } } //now that we have our 'xxxChecked' holders, it's time to go through all the markers and see which to show. for (var k=0; k<gmarkers.length; k++) { // this loop runs thru all markers var surfaceMatches = []; var difficultyMatches = []; var useMatches = []; var surfaceOK = false; var difficultyOK = false; var useOK = false; for (var l=0; l<surfaceChecked.length; l++) { // this loops runs through all checked Surface categories for (var m=0; m<gmarkers[k].mysurface.length; m++) { // this loops through all surfaces on the marker if (gmarkers[k].mysurface[m].childNodes[0].nodeValue == surfaceChecked[l]) { surfaceMatches[l] = true; } } } for (l=0; l<difficultyChecked.length; l++) { // this loops runs through all checked Difficulty categories for (m=0; m<gmarkers[k].mydifficulty.length; m++) { // this loops through all difficulties on the marker if (gmarkers[k].mydifficulty[m].childNodes[0].nodeValue == difficultyChecked[l]) { difficultyMatches[l] = true; } } } for (l=0; l<useChecked.length; l++) { // this loops runs through all checked Use categories for (m=0; m<gmarkers[k].myuse.length; m++) { // this loops through all uses on the marker if (gmarkers[k].myuse[m].childNodes[0].nodeValue == useChecked[l]) { useMatches[l] = true; } } } // now it's time to loop thru the Match arrays and make sure they are all completely true. for (m=0; m<surfaceMatches.length; m++) { if (surfaceMatches[m] == true) { surfaceOK = true; } else if (surfaceMatches[m] == false) {surfaceOK = false; break; } } for (m=0; m<difficultyMatches.length; m++) { if (difficultyMatches[m] == true) { difficultyOK = true; } else if (difficultyMatches[m] == false) {difficultyOK = false; break; } } for (m=0; m<useMatches.length; m++) { if (useMatches[m] == true) { useOK = true; } else if (useMatches[m] == false) {useOK = false; break; } } // And finally, if each of the three OK's is true, then let's show the marker. if ((surfaceOK == true) && (difficultyOK == true) && (useOK == true)) { gmarkers[i].show(); } } }

  Read the article

• MediaElement.js setSrc() Loading The File But Not Changing pluginType

  - by doubleJ

  I'm working on a page that uses mediaelement.js to play mp3/mp4/wmv (yes, we have a lot of wmv). I have a list of links and those links should change the player. My effort is to make the changes to the player through javascript so that the page doesn't refresh. This code is working, but it refreshes every time. See a live demo of the non-ajax version. <?php $file = null; $file = $_GET["file"]; $format = null; if (preg_match("/mp4/i", $file)) $format = "mp4"; if (preg_match("/webm/i", $file)) $format = "webm"; if (preg_match("/wmv/i", $file)) $format = "wmv"; if (preg_match("/mp3/i", $file)) $format = "mp3"; if (preg_match("/ogg/i", $file)) $format = "ogg"; $mime = null; if ($format == "mp4") $mime = "video/mp4"; if ($format == "webm") $mime = "video/webm"; if ($format == "wmv") $mime = "video/wmv"; if ($format == "mp3") $mime = "audio/mp3"; if ($format == "ogg") $mime = "audio/ogg"; $element = "video"; if ($format == "mp3" || $format == "ogg") $element = "audio"; // you have to escape (\) the escape (\) character (hehehe...) $poster = "media\\120701Video.jpg"; $height = "360"; if ($format == "mp3") $height = "30"; ?> <!doctype html> <html> <head> <meta charset="utf-8"> <title>Embed</title> <link rel="stylesheet" href="include/johndyer-mediaelement-b090320/build/mediaelementplayer.min.css"> <style> audio {width:640px; height:30px;} video {width:640px; height:360px;} </style> <script src="include/johndyer-mediaelement-b090320/build/jquery.js"></script> <script src="include/johndyer-mediaelement-b090320/build/mediaelement-and-player.js"></script> </head> <body> <ul> <li><a href="embed.php">Reset</a></li> <li><a href="?file=media/120701Video-AnyVideoConverter.mp4">Alternative (mp4)</a></li> <li><a href="?file=media/120701Video-Ffmpeg-Defaults.webm">Alternative (webm)</a></li> <li><a href="?file=media/AreYouHurting-Death.wmv">Alternative (wmv)</a><li> <li><a href="?file=media/AreYouHurting-Death.mp3">Alternative (mp3)</a></li> </ul> <?php if ($file) { ?> <video src="<?php echo $file; ?>" controls poster="<?php echo $poster; ?>" width="640" height="360"></video> <div id="type"></div> <script> var video = document.getElementsByTagName("video")[0]; var player = new MediaElementPlayer(video, { success: function(player) { $('#type').html(player.pluginType); } }); <?php } ?> </script> </body> </html> This code requires <video> to be loaded, initially and with a file, so that the player mode (pluginType) is set. It will, then, only play formats that the pre-established mode supports (firefox in native mode won't play mp4). See a live demo of the ajax version. <!doctype html> <html> <head> <meta charset="utf-8"> <title>Embed</title> <link rel="stylesheet" href="http://www.mediaelementjs.com/js/mejs-2.9.2/mediaelementplayer.min.css"> <script src="//ajax.googleapis.com/ajax/libs/jquery/1.7.2/jquery.min.js"></script> <script src="http://www.mediaelementjs.com/js/mejs-2.9.2/mediaelement-and-player.js"></script> </head> <body> <ul> <li><a href="javascript:player.pause(); player.setSrc('media/120701Video-AnyVideoConverter.mp4'); player.load(); player.play();">Alternative (mp4)</a></li> <li><a href="javascript:player.pause(); player.setSrc('media/120701Video-Ffmpeg-Defaults.webm'); player.load(); player.play();">Alternative (webm)</a></li> <li><a href="javascript:player.pause(); player.setSrc('media/AreYouHurting-Death.wmv'); player.load(); player.play();">Alternative (wmv)</a></li> <li><a href="javascript:player.pause(); player.setSrc('media/AreYouHurting-Death.mp3'); player.load(); player.play();">Alternative (mp3)</a></li> </ul> <video controls src="media/WordProductionCenter.mp4"></video> <div id="type"></div> <script> var video = document.getElementsByTagName("video")[0]; var player = new MediaElementPlayer(video, { success: function(player) { $('#type').html(player.pluginType); } }); </script> </body> </html> It seems like I need something like setType(), but I see no such option. I've read a couple pages that referenced refreshing the DOM after the javascript runs, but I haven't been able to successfully do it (I know enough about javascript to hack things around and get stuff working, but not enough to create whole new things). It is worth noting that Silverlight doesn't work with Internet Explorer 8 or Safari (not sure if it's my code, mejs, or the browsers). Also, neither Silverlight nor Flash play mp3 or webm (again, not sure where the problem lies). Is there a way to dynamically load different types of files into mediaelement?

  Read the article

• Customer Attribute, not sorting select options

  - by Bosworth99

  Made a module that creates some customer EAV attributes. One of these attributes is a Select, and I'm dropping a bunch of options into their respective tables. Everything lines up and is accessible on both the front end and the back. Last thing before calling this part of things finished is the sort order of the options. They come out all scrambled, instead of the obvious default or alphabetical (seemingly at random... very wierd). I'm on Mage v1.11 (Pro/Enterprise). config.xml <config> <modules> <WACI_CustomerAttr> <version>0.1.0</version> </WACI_CustomerAttr> </modules> <global> <resources> <customerattr_setup> <setup> <module>WACI_CustomerAttr</module> <class>Mage_Customer_Model_Entity_Setup</class> </setup> <connection> <use>core_setup</use> </connection> </customerattr_setup> </resources> <models> <WACI_CustomerAttr> <class>WACI_CustomerAttr_Model</class> </WACI_CustomerAttr> </models> <fieldsets> <customer_account> <agency><create>1</create><update>1</update></agency> <title><create>1</create><update>1</update></title> <phone><create>1</create><update>1</update></phone> <mailing_address><create>1</create><update>1</update></mailing_address> <city><create>1</create><update>1</update></city> <state><create>1</create><update>1</update></state> <zip><create>1</create><update>1</update></zip> <fed_id><create>1</create><update>1</update></fed_id> <ubi><create>1</create><update>1</update></ubi> </customer_account> </fieldsets> </global> </config> mysql4-install-0.1.0.php <?php Mage::log('Installing WACI_CustomerAttr'); echo 'Running Upgrade: '.get_class($this)."\n <br /> \n"; //die ( 'its running' ); $installer = $this; /* @var $installer Mage_Customer_Model_Entity_Setup */ $installer->startSetup(); // bunch of attributes // State $installer->addAttribute('customer','state', array( 'type' => 'varchar', 'group' => 'Default', 'label' => 'State', 'input' => 'select', 'default' => 'Washington', 'source' => 'WACI_CustomerAttr/customer_attribute_data_select', 'global' => Mage_Catalog_Model_Resource_Eav_Attribute::SCOPE_STORE, 'required' => true, 'visible' => true, 'user_defined' => 1, 'position' => 67 ) ); $attrS = Mage::getSingleton('eav/config')->getAttribute('customer', 'state'); $attrS->addData(array('sort_order'=>67)); $attrS->setData('used_in_forms', array('adminhtml_customer','customer_account_edit','customer_account_create'))->save(); $state_list = array('Alabama','Alaska','Arizona','Arkansas','California','Colorado','Connecticut','Delaware','Florida','Georgia', 'Hawaii','Idaho','Illinois','Indiana','Iowa','Kansas','Kentucky','Louisiana','Maine','Maryland','Massachusetts','Michigan', 'Minnesota','Mississippi','Missouri','Montana','Nebraska','Nevada','New Hampshire','New Jersey','New Mexico','New York', 'North Carolina','North Dakota','Ohio','Oklahoma','Oregon','Pennsylvania','Rhode Island','South Carolina','South Dakota', 'Tennessee','Texas','Utah','Vermont','Virginia','Washington','West Virginia','Wisconsin','Wyoming'); $aOption = array(); $aOption['attribute_id'] = $installer->getAttributeId('customer', 'state'); for($iCount=0;$iCount<sizeof($state_list);$iCount++){ $aOption['value']['option'.$iCount][0] = $state_list[$iCount]; } $installer->addAttributeOption($aOption); // a few more $installer->endSetup(); app/code/local/WACI/CustomerAttr/Model/Customer/Attribute/Data/Select.php <?php class WACI_CustomerAttr_Model_Customer_Attribute_Data_Select extends Mage_Eav_Model_Entity_Attribute_Source_Abstract{ function getAllOptions(){ if (is_null($this->_options)) { $this->_options = Mage::getResourceModel('eav/entity_attribute_option_collection') ->setAttributeFilter($this->getAttribute()->getId()) ->setStoreFilter($this->getAttribute()->getStoreId()) ->setPositionOrder('asc') ->load() ->toOptionArray(); } $options = $this->_options; return $options; } } theme/variation/template/persistent/customer/form/register.phtml <li> <?php $attribute = Mage::getModel('eav/config')->getAttribute('customer','state'); ?> <label for="state" class="<?php if($attribute->getIsRequired() == true){?>required<?php } ?>"><?php if($attribute->getIsRequired() == true){?><em>*</em><?php } ?><?php echo $this->__('State') ?></label> <div class="input-box"> <select name="state" id="state" class="<?php if($attribute->getIsRequired() == true){?>required-entry<?php } ?>"> <?php $options = $attribute->getSource()->getAllOptions(); foreach($options as $option){ ?> <option value='<?php echo $option['value']?>' <?php if($this->getFormData()->getState() == $option['value']){ echo 'selected="selected"';}?>><?php echo $this->__($option['label'])?></option> <?php } ?> </select> </div> </li> All options are getting loaded into table eav_attribute_option just fine (albeit without a sort_order defined), as well as table eav_attribute_option_value. In the adminhtml / customer-manage customers-account information this select is showing up fine (but its delivered automatically by the system). Seems I should be able to set the sort-order on creation of the attributeOptions, or, certainly, define the sort order in the data/select class. But nothing I've tried works. I'd rather not do a front-end hack either... Oh, and how do I set the default value of this select? (Different question, I know, but related). Setting the attributes 'default' = 'washington' seems to do nothing. There seem to be a lot of ways to set up attribute select options like this. Is there a better way that the one I've outlined here? Perhaps I'm messing something up. Cheers

  Read the article

• Visualising a 'Smarties' lid using XAML (WPF/Silverlight, Visual Studio/Blend)

  - by Mr. Disappointment

  Hi folks, First off, to clarify something in the title which could well be ambiguous/misleading, I'd like to inform you of my definition of 'Smarties', as I know often products are available all over - only under a different alias. Smarties are a candy product in the UK, little chocolate drops covered in a crispy shell which are distributed in a card tube, this tube used to have a plastic lid/top with an individual letter on the underside (they've taken a more economical approach as of late), the lid/top of the old-style tube is the main element of this question. Familiarisation Link Lid View Link Okay, now with the seller-type pitch out of the way (no, I don't work for Nestlé ;)), hopefully the question is becoming rather clear. Essentially, I'd like to recreate one of these lids using XAML, ultimately to be utilised in a Silverlight web application. That is, I'd like to result in a reusable control, of which the following is true: It looks like a Smarties lid. The colour can be specified. The letter can be specified. The control can be rotated to display either side. The second two seem trivial, but we must bare in mind that the background colour specified will almost, if not always, be the same as the foreground, leaving a visibility issue where the character content is concerned; as for the rotation, I'm hoping this kind of functionality is reasonably available, and acceptable to implement. So, to put this out there, consider a control named SmartiesLid which derives from ToggleButton (appropriate?) and further plotted out using a style in a resource dictionary which applies to it, as follows: <Style TargetType="local:SmartiesLid"> <Setter Property="Background" Value="Red"/> <Setter Property="Foreground" Value="Red"/> <Setter Property="VerticalContentAlignment" Value="Center"/> <Setter Property="HorizontalContentAlignment" Value="Center"/> <Setter Property="Template"> <Setter.Value> <ControlTemplate TargetType="local:SmartiesLid"> <Grid x:Name="LayoutRoot"> <Grid.ColumnDefinitions> <ColumnDefinition Width=".05*"/> <ColumnDefinition/> <ColumnDefinition/> <ColumnDefinition Width=".05*"/> </Grid.ColumnDefinitions> <Grid.RowDefinitions> <RowDefinition Height=".05*"/> <RowDefinition/> <RowDefinition/> <RowDefinition Height=".05*"/> <RowDefinition Height=".1*"/> </Grid.RowDefinitions> <Ellipse Grid.RowSpan="4" Grid.ColumnSpan="4" Fill="{TemplateBinding Background}" Stroke="Transparent"/> <Ellipse Grid.RowSpan="2" Grid.ColumnSpan="2" Grid.Column="1" Grid.Row="1" Fill="{TemplateBinding Background}" Stroke="Transparent"> <Ellipse.Effect> <DropShadowEffect Direction="280" ShadowDepth="6" BlurRadius="6"/> </Ellipse.Effect> </Ellipse> <TextBlock Grid.RowSpan="2" Grid.ColumnSpan="2" Grid.Column="1" Grid.Row="1" Name="LetterTextBlock" Text="{TemplateBinding Content}" Foreground="{TemplateBinding Foreground}" FontSize="190" HorizontalAlignment="Center" VerticalAlignment="Center"> </TextBlock> <!-- <Path Stretch="Fill" Grid.Row="3" Grid.RowSpan="2" Grid.Column="1" Grid.ColumnSpan="2" Fill="Black" Data="..."> How to craw the lid 'tab'? </Path> --> </Grid> <ControlTemplate.Resources> <TranslateTransform x:Key="IndentTransform" X="10" /> <RotateTransform x:Key="RotateTransform" Angle="0" /> <Storyboard x:Key="MouseOver"> </Storyboard> <Storyboard x:Key="MouseLeave"> </Storyboard> </ControlTemplate.Resources> <ControlTemplate.Triggers> <Trigger Property="IsMouseOver" Value="true"> <Trigger.EnterActions> <BeginStoryboard Storyboard="{StaticResource MouseOver}"/> </Trigger.EnterActions> <Trigger.ExitActions> <BeginStoryboard Storyboard="{StaticResource MouseLeave}"/> </Trigger.ExitActions> </Trigger> <Trigger Property="IsPressed" Value="true"> <Setter TargetName="LayoutRoot" Property="RenderTransform" Value="{StaticResource IndentTransform}"/> </Trigger> <Trigger Property="IsChecked" Value="true"> <Setter TargetName="LayoutRoot" Property="RenderTransform" Value="{StaticResource RotateTransform}"/> </Trigger> <Trigger Property="IsEnabled" Value="False"> <Setter Property="Foreground" Value="Gray"/> <Setter Property="Opacity" Value="0.5"/> </Trigger> </ControlTemplate.Triggers> </ControlTemplate> </Setter.Value> </Setter> </Style> With this in mind, can anyone give input on, in decreasing order of my incompetence in an area: Designing the overall look and feel of the damn thing (I'm no designer, and while I could hack away at this single control for days and potentially get something relatively useful, it's always a gamble). The particular barrier for me here is 'pathing' the tab of the lid, as you will see in the XAML as an element commented out. Should Path be used, or would it be more appropriate to transform a rectangle with rounded corners, or any specific suggestions? Bevelling the individually displayed letter; as detailed above, when the colour of both the foreground and background are the same then this will be invisible if no effects are applied, also for a decent level of realism I'd like to be able to apply such an effect/s. So far use of DropShadow and Balder3DEngine have fulfilled my requirements for graphics in XAML, how achievable is a bevel effect? Rotating the control on mouse-click, that is, showing the opposing face. Is this going to be possible using a style and XAML only for the design? Or is it that ugliness may rear it's head in the form of code-behind to show/hide embedded controls? Should the faces be separate controls and later somehow combined? Allowing the control to size dynamically. I'm supposing I will be able to convert a solid, absolute layout to a nice generic one when I actually have the former in place. Obviously this entails sizing the centralised letter and the lid 'tab', but that's it really, other than keeping the aspect ratio equal (since the ellipses grow nicely with the grid). Any suggestions to approaching this would be greatly appreciated, particularly with a dynamically growing font - I've done that before in a web-imaging scenario using code and System.Drawing, and wouldn't like to approach it in even a similar way. By the way, the reason I specify both WPF and Silverlight is that, from my current knowledge, the inputs being written targeting either of these will be fairly transferable for similar output by the other, albeit not without alterations in either scenario. The resulting application is in fact destined to be written in Silverlight, however, so I don't fancy inviting anything from WPF which will guarantee my only being able to convert 90% of it. I'll go give this little project a start, maybe in Blend(?), hopefully can catch up with some advice shortly. Thanks, Mr. D EDIT: Next question, ought this to be broken up into separate questions? :/

  Read the article

• Uploading multiple files using Spring MVC 3.0.2 after HiddenHttpMethodFilter has been enabled

  - by Tiny

  I'm using Spring version 3.0.2. I need to upload multiple files using the multiple="multiple" attribute of a file browser such as, <input type="file" id="myFile" name="myFile" multiple="multiple"/> (and not using multiple file browsers something like the one stated by this answer, it indeed works I tried). Although no versions of Internet Explorer supports this approach unless an appropriate jQuery plugin/widget is used, I don't care about it right now (since most other browsers support this). This works fine with commons fileupload but in addition to using RequestMethod.POST and RequestMethod.GET methods, I also want to use other request methods supported and suggested by Spring like RequestMethod.PUT and RequestMethod.DELETE in their own appropriate places. For this to be so, I have configured Spring with HiddenHttpMethodFilter which goes fine as this question indicates. but it can upload only one file at a time even though multiple files in the file browser are chosen. In the Spring controller class, a method is mapped as follows. @RequestMapping(method={RequestMethod.POST}, value={"admin_side/Temp"}) public String onSubmit(@RequestParam("myFile") List<MultipartFile> files, @ModelAttribute("tempBean") TempBean tempBean, BindingResult error, Map model, HttpServletRequest request, HttpServletResponse response) throws IOException, FileUploadException { for(MultipartFile file:files) { System.out.println(file.getOriginalFilename()); } } Even with the request parameter @RequestParam("myFile") List<MultipartFile> files which is a List of type MultipartFile (it can always have only one file at a time). I could find a strategy which is likely to work with multiple files on this blog. I have gone through it carefully. The solution below the section SOLUTION 2 – USE THE RAW REQUEST says, If however the client insists on using the same form input name such as ‘files[]‘ or ‘files’ and then populating that name with multiple files then a small hack is necessary as follows. As noted above Spring 2.5 throws an exception if it detects the same form input name of type file more than once. CommonsFileUploadSupport – the class which throws that exception is not final and the method which throws that exception is protected so using the wonders of inheritance and subclassing one can simply fix/modify the logic a little bit as follows. The change I’ve made is literally one word representing one method invocation which enables us to have multiple files incoming under the same form input name. It attempts to override the method protected MultipartParsingResult parseFileItems(List fileItems, String encoding) {} of the abstract class CommonsFileUploadSupport by extending the class CommonsMultipartResolver such as, package multipartResolver; import java.io.UnsupportedEncodingException; import java.util.HashMap; import java.util.Iterator; import java.util.List; import java.util.Map; import javax.servlet.ServletContext; import org.apache.commons.fileupload.FileItem; import org.springframework.util.StringUtils; import org.springframework.web.multipart.MultipartException; import org.springframework.web.multipart.MultipartFile; import org.springframework.web.multipart.commons.CommonsMultipartFile; import org.springframework.web.multipart.commons.CommonsMultipartResolver; final public class MultiCommonsMultipartResolver extends CommonsMultipartResolver { public MultiCommonsMultipartResolver() { } public MultiCommonsMultipartResolver(ServletContext servletContext) { super(servletContext); } @Override @SuppressWarnings("unchecked") protected MultipartParsingResult parseFileItems(List fileItems, String encoding) { Map<String, MultipartFile> multipartFiles = new HashMap<String, MultipartFile>(); Map multipartParameters = new HashMap(); // Extract multipart files and multipart parameters. for (Iterator it = fileItems.iterator(); it.hasNext();) { FileItem fileItem = (FileItem) it.next(); if (fileItem.isFormField()) { String value = null; if (encoding != null) { try { value = fileItem.getString(encoding); } catch (UnsupportedEncodingException ex) { if (logger.isWarnEnabled()) { logger.warn("Could not decode multipart item '" + fileItem.getFieldName() + "' with encoding '" + encoding + "': using platform default"); } value = fileItem.getString(); } } else { value = fileItem.getString(); } String[] curParam = (String[]) multipartParameters.get(fileItem.getFieldName()); if (curParam == null) { // simple form field multipartParameters.put(fileItem.getFieldName(), new String[] { value }); } else { // array of simple form fields String[] newParam = StringUtils.addStringToArray(curParam, value); multipartParameters.put(fileItem.getFieldName(), newParam); } } else { // multipart file field CommonsMultipartFile file = new CommonsMultipartFile(fileItem); if (multipartFiles.put(fileItem.getName(), file) != null) { throw new MultipartException("Multiple files for field name [" + file.getName() + "] found - not supported by MultipartResolver"); } if (logger.isDebugEnabled()) { logger.debug("Found multipart file [" + file.getName() + "] of size " + file.getSize() + " bytes with original filename [" + file.getOriginalFilename() + "], stored " + file.getStorageDescription()); } } } return new MultipartParsingResult(multipartFiles, multipartParameters); } } What happens is that the last line in the method parseFileItems() (the return statement) i.e. return new MultipartParsingResult(multipartFiles, multipartParameters); causes a compile-time error because the first parameter multipartFiles is a type of Map implemented by HashMap but in reality, it requires a parameter of type MultiValueMap<String, MultipartFile> It is a constructor of a static class inside the abstract class CommonsFileUploadSupport, public abstract class CommonsFileUploadSupport { protected static class MultipartParsingResult { public MultipartParsingResult(MultiValueMap<String, MultipartFile> mpFiles, Map<String, String[]> mpParams) { } } } The reason might be - this solution is about the Spring version 2.5 and I'm using the Spring version 3.0.2 which might be inappropriate for this version. I however tried to replace the Map with MultiValueMap in various ways such as the one shown in the following segment of code, MultiValueMap<String, MultipartFile>mul=new LinkedMultiValueMap<String, MultipartFile>(); for(Entry<String, MultipartFile>entry:multipartFiles.entrySet()) { mul.add(entry.getKey(), entry.getValue()); } return new MultipartParsingResult(mul, multipartParameters); but no success. I'm not sure how to replace Map with MultiValueMap and even doing so could work either. After doing this, the browser shows the Http response, HTTP Status 400 - type Status report message description The request sent by the client was syntactically incorrect (). Apache Tomcat/6.0.26 I have tried to shorten the question as possible as I could and I haven't included unnecessary code. How could be made it possible to upload multiple files after Spring has been configured with HiddenHttpMethodFilter? That blog indicates that It is a long standing, high priority bug. If there is no solution regarding the version 3.0.2 (3 or higher) then I have to disable Spring support forever and continue to use commons-fileupolad as suggested by the third solution on that blog omitting the PUT, DELETE and other request methods forever. Just curiously waiting for a solution and/or suggestion. Very little changes to the code in the parseFileItems() method inside the class MultiCommonsMultipartResolver might make it to upload multiple files but I couldn't succeed in my attempts (again with the Spring version 3.0.2 (3 or higher)).

  Read the article

• Committed JDO writes do not apply on local GAE HRD, or possibly reused transaction

  - by eeeeaaii

  I'm using JDO 2.3 on app engine. I was using the Master/Slave datastore for local testing and recently switched over to using the HRD datastore for local testing, and parts of my app are breaking (which is to be expected). One part of the app that's breaking is where it sends a lot of writes quickly - that is because of the 1-second limit thing, it's failing with a concurrent modification exception. Okay, so that's also to be expected, so I have the browser retry the writes again later when they fail (maybe not the best hack but I'm just trying to get it working quickly). But a weird thing is happening. Some of the writes which should be succeeding (the ones that DON'T get the concurrent modification exception) are also failing, even though the commit phase completes and the request returns my success code. I can see from the log that the retried requests are working okay, but these other requests that seem to have committed on the first try are, I guess, never "applied." But from what I read about the Apply phase, writing again to that same entity should force the apply... but it doesn't. Code follows. Some things to note: I am attempting to use automatic JDO caching. So this is where JDO uses memcache under the covers. This doesn't actually work unless you wrap everything in a transaction. all the requests are doing is reading a string out of an entity, modifying part of the string, and saving that string back to the entity. If these requests weren't in transactions, you'd of course have the "dirty read" problem. But with transactions, isolation is supposed to be at the level of "serializable" so I don't see what's happening here. the entity being modified is a root entity (not in a group) I have cross-group transactions enabled Another weird thing is happening. If the concurrent modification thing happens, and I subsequently edit more than 5 more entities (this is the max for cross-group transactions), then nothing happens right away, but when I stop and restart the server I get "IllegalArgumentException: operating on too many entity groups in a single transaction". Could it be possible that the PMF is returning the same PersistenceManager every time, or the PM is reusing the same transaction every time? I don't see how I could possibly get the above error otherwise. The code inside the transaction just edits one root entity. I can't think of any other way that GAE would give me the "too many entity groups" error. The relevant code (this is a simplified version) PersistenceManager pm = PMF.getManager(); Transaction tx = pm.currentTransaction(); String responsetext = ""; try { tx.begin(); // I have extra calls to "makePersistent" because I found that relying // on pm.close didn't always write the objects to cache, maybe that // was only a DataNucleus 1.x issue though Key userkey = obtainUserKeyFromCookie(); User u = pm.getObjectById(User.class, userkey); pm.makePersistent(u); // to make sure it gets cached for next time Key mapkey = obtainMapKeyFromQueryString(); // this is NOT a java.util.Map, just FYI Map currentmap = pm.getObjectById(Map.class, mapkey); Text mapData = currentmap.getMapData(); // mapData is JSON stored in the entity Text newMapData = parseModifyAndReturn(mapData); // transform the map currentmap.setMapData(newMapData); // mutate the Map object pm.makePersistent(currentmap); // make sure to persist so there is a cache hit tx.commit(); responsetext = "OK"; } catch (JDOCanRetryException jdoe) { // log jdoe responsetext = "RETRY"; } catch (Exception e) { // log e responsetext = "ERROR"; } finally { if (tx.isActive()) { tx.rollback(); } pm.close(); } resp.getWriter().println(responsetext); EDIT: so I have verified that it fails after exactly 5 transactions. Here's what I do: I create a Foo (root entity), do a bunch of concurrent operations on that Foo, and some fail and get retried, and some commit but don't apply (as described above). Then, I start creating more Foos, and do a few operations on those new Foos. If I only create four Foos, stopping and restarting app engine does NOT give me the IllegalArgumentException. However if I create five Foos (which is the limit for cross-group transactions), then when I stop and restart app engine, I do get the exception. So it seems that somehow these new Foos I am creating are counting toward the limit of 5 max entities per transaction, even though they are supposed to be handled by separate transactions. It's as if a transaction is still open and is being reused by the servlet when it handles the new requests for the 2nd through 5th Foos. EDIT2: it looks like the IllegalArgument thing is independent of the other bug. In other words, it always happens when I create five Foos, even if I don't get the concurrent modification exception. I don't know if it's a symptom of the same problem or if it's unrelated. EDIT3: I found out what was causing the (unrelated) IllegalArgumentException, it was a dumb mistake on my part. But the other issue is still happening. EDIT4: added pseudocode for the datastore access EDIT5: I am pretty sure I know why this is happening, but I will still award the bounty to anyone who can confirm it. Basically, I think the problem is that transactions are not really implemented in the local version of the datastore. References: https://groups.google.com/forum/?fromgroups=#!topic/google-appengine-java/gVMS1dFSpcU https://groups.google.com/forum/?fromgroups=#!topic/google-appengine-java/deGasFdIO-M https://groups.google.com/forum/?hl=en&fromgroups=#!msg/google-appengine-java/4YuNb6TVD6I/gSttMmHYwo0J Because transactions are not implemented, rollback is essentially a no-op. Therefore, I get a dirty read when two transactions try to modify the record at the same time. In other words, A reads the data and B reads the data at the same time. A attempts to modify the data, and B attempts to modify a different part of the data. A writes to the datastore, then B writes, obliterating A's changes. Then B is "rolled back" by app engine, but since rollbacks are a no-op when running on the local datastore, B's changes stay, and A's do not. Meanwhile, since B is the thread that threw the exception, the client retries B, but does not retry A (since A was supposedly the transaction that succeeded).

  Read the article

• JNI String Corruption

  - by Chris Dennett

  Hi everyone, I'm getting weird string corruption across JNI calls which is causing problems on the the Java side. Every so often, I'll get a corrupted string in the passed array, which sometimes has existing parts of the original non-corrupted string. The C++ code is supposed to set the first index of the array to the address, it's a nasty hack to get around method call limitations. Additionally, the application is multi-threaded. remoteaddress[0]: 10.1.1.2:49153 remoteaddress[0]: 10.1.4.2:49153 remoteaddress[0]: 10.1.6.2:49153 remoteaddress[0]: 10.1.2.2:49153 remoteaddress[0]: 10.1.9.2:49153 remoteaddress[0]: {garbage here} java.lang.NullPointerException at kokuks.KKSAddress.<init>(KKSAddress.java:139) at kokuks.KKSAddress.createAddress(KKSAddress.java:48) at kokuks.KKSSocket._recvFrom(KKSSocket.java:963) at kokuks.scheduler.RecvOperation$1.execute(RecvOperation.java:144) at kokuks.scheduler.RecvOperation$1.execute(RecvOperation.java:1) at kokuks.KKSEvent.run(KKSEvent.java:58) at kokuks.KokuKS.handleJNIEventExpiry(KokuKS.java:872) at kokuks.KokuKS.handleJNIEventExpiry_fjni(KokuKS.java:880) at kokuks.KokuKS.runSimulator_jni(Native Method) at kokuks.KokuKS$1.run(KokuKS.java:773) at java.lang.Thread.run(Thread.java:717) remoteaddress[0]: 10.1.7.2:49153 The null pointer exception comes from trying to use the corrupt string. In C++, the address prints to standard out normally, but doing this reduces the rate of errors, from what I can see. The C++ code (if it helps): /* * Class: kokuks_KKSSocket * Method: recvFrom_jni * Signature: (Ljava/lang/String;[Ljava/lang/String;Ljava/nio/ByteBuffer;IIJ)I */ JNIEXPORT jint JNICALL Java_kokuks_KKSSocket_recvFrom_1jni (JNIEnv *env, jobject obj, jstring sockpath, jobjectArray addrarr, jobject buf, jint position, jint limit, jlong flags) { if (addrarr && env->GetArrayLength(addrarr) > 0) { env->SetObjectArrayElement(addrarr, 0, NULL); } jboolean iscopy; const char* cstr = env->GetStringUTFChars(sockpath, &iscopy); std::string spath = std::string(cstr); env->ReleaseStringUTFChars(sockpath, cstr); // release me! if (KKS_DEBUG) { std::cout << "[kks-c~" << spath << "] " << __PRETTY_FUNCTION__ << std::endl; } ns3::Ptr<ns3::Socket> socket = ns3::Names::Find<ns3::Socket>(spath); if (!socket) { std::cout << "[kks-c~" << spath << "] " << __PRETTY_FUNCTION__ << " socket not found for path!!" << std::endl; return -1; // not found } if (!addrarr) { std::cout << "[kks-c~" << spath << "] " << __PRETTY_FUNCTION__ << " array to set sender is null" << std::endl; return -1; } jsize arrsize = env->GetArrayLength(addrarr); if (arrsize < 1) { std::cout << "[kks-c~" << spath << "] " << __PRETTY_FUNCTION__ << " array too small to set sender!" << std::endl; return -1; } uint8_t* bufaddr = (uint8_t*)env->GetDirectBufferAddress(buf); long bufcap = env->GetDirectBufferCapacity(buf); uint8_t* realbufaddr = bufaddr + position; uint32_t remaining = limit - position; if (KKS_DEBUG) { std::cout << "[kks-c~" << spath << "] " << __PRETTY_FUNCTION__ << " bufaddr: " << bufaddr << ", cap: " << bufcap << std::endl; } ns3::Address aaddr; uint32_t mflags = flags; int ret = socket->RecvFrom(realbufaddr, remaining, mflags, aaddr); if (ret > 0) { if (KKS_DEBUG) std::cout << "[kks-c~" << spath << "] " << __PRETTY_FUNCTION__ << " addr: " << aaddr << std::endl; ns3::InetSocketAddress insa = ns3::InetSocketAddress::ConvertFrom(aaddr); std::stringstream ss; insa.GetIpv4().Print(ss); ss << ":" << insa.GetPort() << std::ends; if (KKS_DEBUG) std::cout << "[kks-c~" << spath << "] " << __PRETTY_FUNCTION__ << " addr: " << ss.str() << std::endl; jsize index = 0; const char *cstr = ss.str().c_str(); jstring jaddr = env->NewStringUTF(cstr); if (jaddr == NULL) std::cout << "[kks-c~" << spath << "] " << __PRETTY_FUNCTION__ << " jaddr is null!!" << std::endl; //jaddr = (jstring)env->NewGlobalRef(jaddr); env->SetObjectArrayElement(addrarr, index, jaddr); //if (env->ExceptionOccurred()) { // env->ExceptionDescribe(); //} } jint jret = ret; return jret; } The Java code (if it helps): /** * Pass an array of size 1 into remote address, and this will be set with * the sender of the packet (hax). This emulates C++ references. * * @param remoteaddress * @param buf * @param flags * @return */ public int _recvFrom(final KKSAddress remoteaddress[], ByteBuffer buf, long flags) { if (!kks.isCurrentlyThreadSafe()) throw new RuntimeException( "Not currently thread safe for ns-3 functions!" ); //lock.lock(); try { if (!buf.isDirect()) return -6; // not direct!! final String[] remoteAddrStr = new String[1]; int ret = 0; ret = recvFrom_jni( path.toPortableString(), remoteAddrStr, buf, buf.position(), buf.limit(), flags ); if (ret > 0) { System.out.println("remoteaddress[0]: " + remoteAddrStr[0]); remoteaddress[0] = KKSAddress.createAddress(remoteAddrStr[0]); buf.position(buf.position() + ret); } return ret; } finally { errNo = _getErrNo(); //lock.unlock(); } } public int recvFrom(KKSAddress[] fromaddress, final ByteBuffer bytes, long flags, long timeoutMS) { if (KokuKS.DEBUG_MODE) printMessage("public synchronized int recvFrom(KKSAddress[] fromaddress, final ByteBuffer bytes, long flags, long timeoutMS)"); if (kks.isCurrentlyThreadSafe()) { return _recvFrom(fromaddress, bytes, flags); // avoid event } fromaddress[0] = null; RecvOperation ro = new RecvOperation( kks, this, flags, true, bytes, timeoutMS ); ro.start(); fromaddress[0] = ro.getFrom(); return ro.getRetCode(); }

  Read the article

• c# Unable to open file for reading

  - by Maks

  I'm writing a program that uses FileSystemWatcher to monitor changes to a given directory, and when it recieves OnCreated or OnChanged event, it copies those created/changed files to a specified directorie(s). At first I had problems with the fact that OnChanged/OnCreated events can be sent twice (not acceptable in case it needed to process 500MB file) but I made a way around this and with what I'm REALLY STUCKED with is getting the following IOException: The process cannot access the file 'C:\Where are Photos\bookmarks (11).html' because it is being used by another process. Thus, preventing the program from copying all the files it should. So as I mentioned, when user uses this program he/she specifes monitored directory, when user copies/creates/changes file in that directory, program should get OnCreated/OnChanged event and then copy that file to few other directories. Above error happens in all casess, if user copies few files that needs to owerwrite other ones in folder being monitored or when copying bulk of several files or even sometimes when copying one file in a monitored directory. Whole program is quite big so I'm sending the most important parts. OnCreated: private void OnCreated(object source, FileSystemEventArgs e) { AddLogEntry(e.FullPath, "created", ""); // Update last access data if it's file so the same file doesn't // get processed twice because of sending another event. if (fileType(e.FullPath) == 2) { lastPath = e.FullPath; lastTime = DateTime.Now; } // serves no purpose now, it will be remove soon string fileName = GetFileName(e.FullPath); // copies file from source to few other directories Copy(e.FullPath, fileName); Console.WriteLine("OnCreated: " + e.FullPath); } OnChanged: private void OnChanged(object source, FileSystemEventArgs e) { // is it directory if (fileType(e.FullPath) == 1) return; // don't mind directory changes itself // Only if enough time has passed or if it's some other file // because two events can be generated int timeDiff = ((TimeSpan)(DateTime.Now - lastTime)).Seconds; if ((timeDiff < minSecsDiff) && (e.FullPath.Equals(lastPath))) { Console.WriteLine("-- skipped -- {0}, timediff: {1}", e.FullPath, timeDiff); return; } // Update last access data for above to work lastPath = e.FullPath; lastTime = DateTime.Now; // Only if size is changed, the rest will handle other handlers if (e.ChangeType == WatcherChangeTypes.Changed) { AddLogEntry(e.FullPath, "changed", ""); string fileName = GetFileName(e.FullPath); Copy(e.FullPath, fileName); Console.WriteLine("OnChanged: " + e.FullPath); } } fileType: private int fileType(string path) { if (Directory.Exists(path)) return 1; // directory else if (File.Exists(path)) return 2; // file else return 0; } Copy: private void Copy(string srcPath, string fileName) { foreach (string dstDirectoy in paths) { string eventType = "copied"; string error = "noerror"; string path = ""; string dirPortion = ""; // in case directory needs to be made if (srcPath.Length > fsw.Path.Length) { path = srcPath.Substring(fsw.Path.Length, srcPath.Length - fsw.Path.Length); int pos = path.LastIndexOf('\\'); if (pos != -1) dirPortion = path.Substring(0, pos); } if (fileType(srcPath) == 1) { try { Directory.CreateDirectory(dstDirectoy + path); //Directory.CreateDirectory(dstDirectoy + fileName); eventType = "created"; } catch (IOException e) { eventType = "error"; error = e.Message; } } else { try { if (!overwriteFile && File.Exists(dstDirectoy + path)) continue; // create new dir anyway even if it exists just to be sure Directory.CreateDirectory(dstDirectoy + dirPortion); // copy file from where event occured to all specified directories using (FileStream fsin = new FileStream(srcPath, FileMode.Open, FileAccess.Read, FileShare.Read)) { using (FileStream fsout = new FileStream(dstDirectoy + path, FileMode.Create, FileAccess.Write)) { byte[] buffer = new byte[32768]; int bytesRead = -1; while ((bytesRead = fsin.Read(buffer, 0, buffer.Length)) > 0) fsout.Write(buffer, 0, bytesRead); } } } catch (Exception e) { if ((e is IOException) && (overwriteFile == false)) { eventType = "skipped"; } else { eventType = "error"; error = e.Message; // attempt to find and kill the process locking the file. // failed, miserably System.Diagnostics.Process tool = new System.Diagnostics.Process(); tool.StartInfo.FileName = "handle.exe"; tool.StartInfo.Arguments = "\"" + srcPath + "\""; tool.StartInfo.UseShellExecute = false; tool.StartInfo.RedirectStandardOutput = true; tool.Start(); tool.WaitForExit(); string outputTool = tool.StandardOutput.ReadToEnd(); string matchPattern = @"(?<=\s+pid:\s+)\b(\d+)\b(?=\s+)"; foreach (Match match in Regex.Matches(outputTool, matchPattern)) { System.Diagnostics.Process.GetProcessById(int.Parse(match.Value)).Kill(); } Console.WriteLine("ERROR: {0}: [ {1} ]", e.Message, srcPath); } } } AddLogEntry(dstDirectoy + path, eventType, error); } } I checked everywhere in my program and whenever I use some file I use it in using block so even writing event to log (class for what I ommited since there is probably too much code already in post) wont lock the file, that is it shouldn't since all operations are using using statement block. I simply have no clue who's locking the file if not my program "copy" process from user through Windows or something else. Right now I have two possible "solutions" (I can't say they are clean solutions since they are hacks and as such not desireable). Since probably the problem is with fileType method (what else could lock the file?) I tried changing it to this, to simulate "blocking-until-ready-to-open" operation: fileType: private int fileType(string path) { FileStream fs = null; int ret = 0; bool run = true; if (Directory.Exists(path)) ret = 1; else { while (run) { try { fs = new FileStream(path, FileMode.Open); ret = 2; run = false; } catch (IOException) { } finally { if (fs != null) { fs.Close(); fs.Dispose(); } } } } return ret; } This is working as much as I could tell (test), but... it's hack, not to mention other deficients. The other "solution" I could try (I didn't test it yet) is using GC.Collect() somewhere at the end of fileType() method. Maybe even worse "solution" than previous one. Can someone pleas tell me, what on earth is locking the file, preventing it from opening and how can I fix that? What am I missing to see? Thanks in advance.

  Read the article

• Custom ASP.NET Routing to an HttpHandler

  - by Rick Strahl

  As of version 4.0 ASP.NET natively supports routing via the now built-in System.Web.Routing namespace. Routing features are automatically integrated into the HtttpRuntime via a few custom interfaces. New Web Forms Routing Support In ASP.NET 4.0 there are a host of improvements including routing support baked into Web Forms via a RouteData property available on the Page class and RouteCollection.MapPageRoute() route handler that makes it easy to route to Web forms. To map ASP.NET Page routes is as simple as setting up the routes with MapPageRoute:protected void Application_Start(object sender, EventArgs e) { RegisterRoutes(RouteTable.Routes); } void RegisterRoutes(RouteCollection routes) { routes.MapPageRoute("StockQuote", "StockQuote/{symbol}", "StockQuote.aspx"); routes.MapPageRoute("StockQuotes", "StockQuotes/{symbolList}", "StockQuotes.aspx"); } and then accessing the route data in the page you can then use the new Page class RouteData property to retrieve the dynamic route data information:public partial class StockQuote1 : System.Web.UI.Page { protected StockQuote Quote = null; protected void Page_Load(object sender, EventArgs e) { string symbol = RouteData.Values["symbol"] as string; StockServer server = new StockServer(); Quote = server.GetStockQuote(symbol); // display stock data in Page View } } Simple, quick and doesn’t require much explanation. If you’re using WebForms most of your routing needs should be served just fine by this simple mechanism. Kudos to the ASP.NET team for putting this in the box and making it easy! How Routing Works To handle Routing in ASP.NET involves these steps: Registering Routes Creating a custom RouteHandler to retrieve an HttpHandler Attaching RouteData to your HttpHandler Picking up Route Information in your Request code Registering routes makes ASP.NET aware of the Routes you want to handle via the static RouteTable.Routes collection. You basically add routes to this collection to let ASP.NET know which URL patterns it should watch for. You typically hook up routes off a RegisterRoutes method that fires in Application_Start as I did in the example above to ensure routes are added only once when the application first starts up. When you create a route, you pass in a RouteHandler instance which ASP.NET caches and reuses as routes are matched. Once registered ASP.NET monitors the routes and if a match is found just prior to the HttpHandler instantiation, ASP.NET uses the RouteHandler registered for the route and calls GetHandler() on it to retrieve an HttpHandler instance. The RouteHandler.GetHandler() method is responsible for creating an instance of an HttpHandler that is to handle the request and – if necessary – to assign any additional custom data to the handler. At minimum you probably want to pass the RouteData to the handler so the handler can identify the request based on the route data available. To do this you typically add  a RouteData property to your handler and then assign the property from the RouteHandlers request context. This is essentially how Page.RouteData comes into being and this approach should work well for any custom handler implementation that requires RouteData. It’s a shame that ASP.NET doesn’t have a top level intrinsic object that’s accessible off the HttpContext object to provide route data more generically, but since RouteData is directly tied to HttpHandlers and not all handlers support it it might cause some confusion of when it’s actually available. Bottom line is that if you want to hold on to RouteData you have to assign it to a custom property of the handler or else pass it to the handler via Context.Items[] object that can be retrieved on an as needed basis. It’s important to understand that routing is hooked up via RouteHandlers that are responsible for loading HttpHandler instances. RouteHandlers are invoked for every request that matches a route and through this RouteHandler instance the Handler gains access to the current RouteData. Because of this logic it’s important to understand that Routing is really tied to HttpHandlers and not available prior to handler instantiation, which is pretty late in the HttpRuntime’s request pipeline. IOW, Routing works with Handlers but not with earlier in the pipeline within Modules. Specifically ASP.NET calls RouteHandler.GetHandler() from the PostResolveRequestCache HttpRuntime pipeline event. Here’s the call stack at the beginning of the GetHandler() call: which fires just before handler resolution. Non-Page Routing – You need to build custom RouteHandlers If you need to route to a custom Http Handler or other non-Page (and non-MVC) endpoint in the HttpRuntime, there is no generic mapping support available. You need to create a custom RouteHandler that can manage creating an instance of an HttpHandler that is fired in response to a routed request. Depending on what you are doing this process can be simple or fairly involved as your code is responsible based on the route data provided which handler to instantiate, and more importantly how to pass the route data on to the Handler. Luckily creating a RouteHandler is easy by implementing the IRouteHandler interface which has only a single GetHttpHandler(RequestContext context) method. In this method you can pick up the requestContext.RouteData, instantiate the HttpHandler of choice, and assign the RouteData to it. Then pass back the handler and you’re done.Here’s a simple example of GetHttpHandler() method that dynamically creates a handler based on a passed in Handler type./// <summary> /// Retrieves an Http Handler based on the type specified in the constructor /// </summary> /// <param name="requestContext"></param> /// <returns></returns> IHttpHandler IRouteHandler.GetHttpHandler(RequestContext requestContext) { IHttpHandler handler = Activator.CreateInstance(CallbackHandlerType) as IHttpHandler; // If we're dealing with a Callback Handler // pass the RouteData for this route to the Handler if (handler is CallbackHandler) ((CallbackHandler)handler).RouteData = requestContext.RouteData; return handler; } Note that this code checks for a specific type of handler and if it matches assigns the RouteData to this handler. This is optional but quite a common scenario if you want to work with RouteData. If the handler you need to instantiate isn’t under your control but you still need to pass RouteData to Handler code, an alternative is to pass the RouteData via the HttpContext.Items collection:IHttpHandler IRouteHandler.GetHttpHandler(RequestContext requestContext) { IHttpHandler handler = Activator.CreateInstance(CallbackHandlerType) as IHttpHandler; requestContext.HttpContext.Items["RouteData"] = requestContext.RouteData; return handler; } The code in the handler implementation can then pick up the RouteData from the context collection as needed:RouteData routeData = HttpContext.Current.Items["RouteData"] as RouteData This isn’t as clean as having an explicit RouteData property, but it does have the advantage that the route data is visible anywhere in the Handler’s code chain. It’s definitely preferable to create a custom property on your handler, but the Context work-around works in a pinch when you don’t’ own the handler code and have dynamic code executing as part of the handler execution. An Example of a Custom RouteHandler: Attribute Based Route Implementation In this post I’m going to discuss a custom routine implementation I built for my CallbackHandler class in the West Wind Web & Ajax Toolkit. CallbackHandler can be very easily used for creating AJAX, REST and POX requests following RPC style method mapping. You can pass parameters via URL query string, POST data or raw data structures, and you can retrieve results as JSON, XML or raw string/binary data. It’s a quick and easy way to build service interfaces with no fuss. As a quick review here’s how CallbackHandler works: You create an Http Handler that derives from CallbackHandler You implement methods that have a [CallbackMethod] Attribute and that’s it. Here’s an example of an CallbackHandler implementation in an ashx.cs based handler:// RestService.ashx.cs public class RestService : CallbackHandler { [CallbackMethod] public StockQuote GetStockQuote(string symbol) { StockServer server = new StockServer(); return server.GetStockQuote(symbol); } [CallbackMethod] public StockQuote[] GetStockQuotes(string symbolList) { StockServer server = new StockServer(); string[] symbols = symbolList.Split(new char[2] { ',',';' },StringSplitOptions.RemoveEmptyEntries); return server.GetStockQuotes(symbols); } } CallbackHandler makes it super easy to create a method on the server, pass data to it via POST, QueryString or raw JSON/XML data, and then retrieve the results easily back in various formats. This works wonderful and I’ve used these tools in many projects for myself and with clients. But one thing missing has been the ability to create clean URLs. Typical URLs looked like this: http://www.west-wind.com/WestwindWebToolkit/samples/Rest/StockService.ashx?Method=GetStockQuote&symbol=msfthttp://www.west-wind.com/WestwindWebToolkit/samples/Rest/StockService.ashx?Method=GetStockQuotes&symbolList=msft,intc,gld,slw,mwe&format=xml which works and is clear enough, but also clearly very ugly. It would be much nicer if URLs could look like this: http://www.west-wind.com//WestwindWebtoolkit/Samples/StockQuote/msfthttp://www.west-wind.com/WestwindWebtoolkit/Samples/StockQuotes/msft,intc,gld,slw?format=xml (the Virtual Root in this sample is WestWindWebToolkit/Samples and StockQuote/{symbol} is the route)(If you use FireFox try using the JSONView plug-in make it easier to view JSON content) So, taking a clue from the WCF REST tools that use RouteUrls I set out to create a way to specify RouteUrls for each of the endpoints. The change made basically allows changing the above to: [CallbackMethod(RouteUrl="RestService/StockQuote/{symbol}")] public StockQuote GetStockQuote(string symbol) { StockServer server = new StockServer(); return server.GetStockQuote(symbol); } [CallbackMethod(RouteUrl = "RestService/StockQuotes/{symbolList}")] public StockQuote[] GetStockQuotes(string symbolList) { StockServer server = new StockServer(); string[] symbols = symbolList.Split(new char[2] { ',',';' },StringSplitOptions.RemoveEmptyEntries); return server.GetStockQuotes(symbols); } where a RouteUrl is specified as part of the Callback attribute. And with the changes made with RouteUrls I can now get URLs like the second set shown earlier. So how does that work? Let’s find out… How to Create Custom Routes As mentioned earlier Routing is made up of several steps: Creating a custom RouteHandler to create HttpHandler instances Mapping the actual Routes to the RouteHandler Retrieving the RouteData and actually doing something useful with it in the HttpHandler In the CallbackHandler routing example above this works out to something like this: Create a custom RouteHandler that includes a property to track the method to call Set up the routes using Reflection against the class Looking for any RouteUrls in the CallbackMethod attribute Add a RouteData property to the CallbackHandler so we can access the RouteData in the code of the handler Creating a Custom Route Handler To make the above work I created a custom RouteHandler class that includes the actual IRouteHandler implementation as well as a generic and static method to automatically register all routes marked with the [CallbackMethod(RouteUrl="…")] attribute. Here’s the code:/// <summary> /// Route handler that can create instances of CallbackHandler derived /// callback classes. The route handler tracks the method name and /// creates an instance of the service in a predictable manner /// </summary> /// <typeparam name="TCallbackHandler">CallbackHandler type</typeparam> public class CallbackHandlerRouteHandler : IRouteHandler { /// <summary> /// Method name that is to be called on this route. /// Set by the automatically generated RegisterRoutes /// invokation. /// </summary> public string MethodName { get; set; } /// <summary> /// The type of the handler we're going to instantiate. /// Needed so we can semi-generically instantiate the /// handler and call the method on it. /// </summary> public Type CallbackHandlerType { get; set; } /// <summary> /// Constructor to pass in the two required components we /// need to create an instance of our handler. /// </summary> /// <param name="methodName"></param> /// <param name="callbackHandlerType"></param> public CallbackHandlerRouteHandler(string methodName, Type callbackHandlerType) { MethodName = methodName; CallbackHandlerType = callbackHandlerType; } /// <summary> /// Retrieves an Http Handler based on the type specified in the constructor /// </summary> /// <param name="requestContext"></param> /// <returns></returns> IHttpHandler IRouteHandler.GetHttpHandler(RequestContext requestContext) { IHttpHandler handler = Activator.CreateInstance(CallbackHandlerType) as IHttpHandler; // If we're dealing with a Callback Handler // pass the RouteData for this route to the Handler if (handler is CallbackHandler) ((CallbackHandler)handler).RouteData = requestContext.RouteData; return handler; } /// <summary> /// Generic method to register all routes from a CallbackHandler /// that have RouteUrls defined on the [CallbackMethod] attribute /// </summary> /// <typeparam name="TCallbackHandler">CallbackHandler Type</typeparam> /// <param name="routes"></param> public static void RegisterRoutes<TCallbackHandler>(RouteCollection routes) { // find all methods var methods = typeof(TCallbackHandler).GetMethods(BindingFlags.Instance | BindingFlags.Public); foreach (var method in methods) { var attrs = method.GetCustomAttributes(typeof(CallbackMethodAttribute), false); if (attrs.Length < 1) continue; CallbackMethodAttribute attr = attrs[0] as CallbackMethodAttribute; if (string.IsNullOrEmpty(attr.RouteUrl)) continue; // Add the route routes.Add(method.Name, new Route(attr.RouteUrl, new CallbackHandlerRouteHandler(method.Name, typeof(TCallbackHandler)))); } } } The RouteHandler implements IRouteHandler, and its responsibility via the GetHandler method is to create an HttpHandler based on the route data. When ASP.NET calls GetHandler it passes a requestContext parameter which includes a requestContext.RouteData property. This parameter holds the current request’s route data as well as an instance of the current RouteHandler. If you look at GetHttpHandler() you can see that the code creates an instance of the handler we are interested in and then sets the RouteData property on the handler. This is how you can pass the current request’s RouteData to the handler. The RouteData object also has a  RouteData.RouteHandler property that is also available to the Handler later, which is useful in order to get additional information about the current route. In our case here the RouteHandler includes a MethodName property that identifies the method to execute in the handler since that value no longer comes from the URL so we need to figure out the method name some other way. The method name is mapped explicitly when the RouteHandler is created and here the static method that auto-registers all CallbackMethods with RouteUrls sets the method name when it creates the routes while reflecting over the methods (more on this in a minute). The important point here is that you can attach additional properties to the RouteHandler and you can then later access the RouteHandler and its properties later in the Handler to pick up these custom values. This is a crucial feature in that the RouteHandler serves in passing additional context to the handler so it knows what actions to perform. The automatic route registration is handled by the static RegisterRoutes<TCallbackHandler> method. This method is generic and totally reusable for any CallbackHandler type handler. To register a CallbackHandler and any RouteUrls it has defined you simple use code like this in Application_Start (or other application startup code):protected void Application_Start(object sender, EventArgs e) { // Register Routes for RestService CallbackHandlerRouteHandler.RegisterRoutes<RestService>(RouteTable.Routes); } If you have multiple CallbackHandler style services you can make multiple calls to RegisterRoutes for each of the service types. RegisterRoutes internally uses reflection to run through all the methods of the Handler, looking for CallbackMethod attributes and whether a RouteUrl is specified. If it is a new instance of a CallbackHandlerRouteHandler is created and the name of the method and the type are set. routes.Add(method.Name,           new Route(attr.RouteUrl, new CallbackHandlerRouteHandler(method.Name, typeof(TCallbackHandler) )) ); While the routing with CallbackHandlerRouteHandler is set up automatically for all methods that use the RouteUrl attribute, you can also use code to hook up those routes manually and skip using the attribute. The code for this is straightforward and just requires that you manually map each individual route to each method you want a routed: protected void Application_Start(objectsender, EventArgs e){    RegisterRoutes(RouteTable.Routes);}void RegisterRoutes(RouteCollection routes) { routes.Add("StockQuote Route",new Route("StockQuote/{symbol}",                     new CallbackHandlerRouteHandler("GetStockQuote",typeof(RestService) ) ) );     routes.Add("StockQuotes Route",new Route("StockQuotes/{symbolList}",                     new CallbackHandlerRouteHandler("GetStockQuotes",typeof(RestService) ) ) );}I think it’s clearly easier to have CallbackHandlerRouteHandler.RegisterRoutes() do this automatically for you based on RouteUrl attributes, but some people have a real aversion to attaching logic via attributes. Just realize that the option to manually create your routes is available as well. Using the RouteData in the Handler A RouteHandler’s responsibility is to create an HttpHandler and as mentioned earlier, natively IHttpHandler doesn’t have any support for RouteData. In order to utilize RouteData in your handler code you have to pass the RouteData to the handler. In my CallbackHandlerRouteHandler when it creates the HttpHandler instance it creates the instance and then assigns the custom RouteData property on the handler:IHttpHandler handler = Activator.CreateInstance(CallbackHandlerType) as IHttpHandler; if (handler is CallbackHandler) ((CallbackHandler)handler).RouteData = requestContext.RouteData; return handler; Again this only works if you actually add a RouteData property to your handler explicitly as I did in my CallbackHandler implementation:/// <summary> /// Optionally store RouteData on this handler /// so we can access it internally /// </summary> public RouteData RouteData {get; set; } and the RouteHandler needs to set it when it creates the handler instance. Once you have the route data in your handler you can access Route Keys and Values and also the RouteHandler. Since my RouteHandler has a custom property for the MethodName to retrieve it from within the handler I can do something like this now to retrieve the MethodName (this example is actually not in the handler but target is an instance pass to the processor): // check for Route Data method name if (target is CallbackHandler) { var routeData = ((CallbackHandler)target).RouteData; if (routeData != null) methodToCall = ((CallbackHandlerRouteHandler)routeData.RouteHandler).MethodName; } When I need to access the dynamic values in the route ( symbol in StockQuote/{symbol}) I can retrieve it easily with the Values collection (RouteData.Values["symbol"]). In my CallbackHandler processing logic I’m basically looking for matching parameter names to Route parameters: // look for parameters in the routeif(routeData != null){    string parmString = routeData.Values[parameter.Name] as string;    adjustedParms[parmCounter] = ReflectionUtils.StringToTypedValue(parmString, parameter.ParameterType);} And with that we’ve come full circle. We’ve created a custom RouteHandler() that passes the RouteData to the handler it creates. We’ve registered our routes to use the RouteHandler, and we’ve utilized the route data in our handler. For completeness sake here’s the routine that executes a method call based on the parameters passed in and one of the options is to retrieve the inbound parameters off RouteData (as well as from POST data or QueryString parameters):internal object ExecuteMethod(string method, object target, string[] parameters, CallbackMethodParameterType paramType, ref CallbackMethodAttribute callbackMethodAttribute) { HttpRequest Request = HttpContext.Current.Request; object Result = null; // Stores parsed parameters (from string JSON or QUeryString Values) object[] adjustedParms = null; Type PageType = target.GetType(); MethodInfo MI = PageType.GetMethod(method, BindingFlags.Instance | BindingFlags.Public | BindingFlags.NonPublic); if (MI == null) throw new InvalidOperationException("Invalid Server Method."); object[] methods = MI.GetCustomAttributes(typeof(CallbackMethodAttribute), false); if (methods.Length < 1) throw new InvalidOperationException("Server method is not accessible due to missing CallbackMethod attribute"); if (callbackMethodAttribute != null) callbackMethodAttribute = methods[0] as CallbackMethodAttribute; ParameterInfo[] parms = MI.GetParameters(); JSONSerializer serializer = new JSONSerializer(); RouteData routeData = null; if (target is CallbackHandler) routeData = ((CallbackHandler)target).RouteData; int parmCounter = 0; adjustedParms = new object[parms.Length]; foreach (ParameterInfo parameter in parms) { // Retrieve parameters out of QueryString or POST buffer if (parameters == null) { // look for parameters in the route if (routeData != null) { string parmString = routeData.Values[parameter.Name] as string; adjustedParms[parmCounter] = ReflectionUtils.StringToTypedValue(parmString, parameter.ParameterType); } // GET parameter are parsed as plain string values - no JSON encoding else if (HttpContext.Current.Request.HttpMethod == "GET") { // Look up the parameter by name string parmString = Request.QueryString[parameter.Name]; adjustedParms[parmCounter] = ReflectionUtils.StringToTypedValue(parmString, parameter.ParameterType); } // POST parameters are treated as methodParameters that are JSON encoded else if (paramType == CallbackMethodParameterType.Json) //string newVariable = methodParameters.GetValue(parmCounter) as string; adjustedParms[parmCounter] = serializer.Deserialize(Request.Params["parm" + (parmCounter + 1).ToString()], parameter.ParameterType); else adjustedParms[parmCounter] = SerializationUtils.DeSerializeObject( Request.Params["parm" + (parmCounter + 1).ToString()], parameter.ParameterType); } else if (paramType == CallbackMethodParameterType.Json) adjustedParms[parmCounter] = serializer.Deserialize(parameters[parmCounter], parameter.ParameterType); else adjustedParms[parmCounter] = SerializationUtils.DeSerializeObject(parameters[parmCounter], parameter.ParameterType); parmCounter++; } Result = MI.Invoke(target, adjustedParms); return Result; } The code basically uses Reflection to loop through all the parameters available on the method and tries to assign the parameters from RouteData, QueryString or POST variables. The parameters are converted into their appropriate types and then used to eventually make a Reflection based method call. What’s sweet is that the RouteData retrieval is just another option for dealing with the inbound data in this scenario and it adds exactly two lines of code plus the code to retrieve the MethodName I showed previously – a seriously low impact addition that adds a lot of extra value to this endpoint callback processing implementation. Debugging your Routes If you create a lot of routes it’s easy to run into Route conflicts where multiple routes have the same path and overlap with each other. This can be difficult to debug especially if you are using automatically generated routes like the routes created by CallbackHandlerRouteHandler.RegisterRoutes. Luckily there’s a tool that can help you out with this nicely. Phill Haack created a RouteDebugging tool you can download and add to your project. The easiest way to do this is to grab and add this to your project is to use NuGet (Add Library Package from your Project’s Reference Nodes):   which adds a RouteDebug assembly to your project. Once installed you can easily debug your routes with this simple line of code which needs to be installed at application startup:protected void Application_Start(object sender, EventArgs e) { CallbackHandlerRouteHandler.RegisterRoutes<StockService>(RouteTable.Routes); // Debug your routes RouteDebug.RouteDebugger.RewriteRoutesForTesting(RouteTable.Routes); } Any routed URL then displays something like this: The screen shows you your current route data and all the routes that are mapped along with a flag that displays which route was actually matched. This is useful – if you have any overlap of routes you will be able to see which routes are triggered – the first one in the sequence wins. This tool has saved my ass on a few occasions – and with NuGet now it’s easy to add it to your project in a few seconds and then remove it when you’re done. Routing Around Custom routing seems slightly complicated on first blush due to its disconnected components of RouteHandler, route registration and mapping of custom handlers. But once you understand the relationship between a RouteHandler, the RouteData and how to pass it to a handler, utilizing of Routing becomes a lot easier as you can easily pass context from the registration to the RouteHandler and through to the HttpHandler. The most important thing to understand when building custom routing solutions is to figure out how to map URLs in such a way that the handler can figure out all the pieces it needs to process the request. This can be via URL routing parameters and as I did in my example by passing additional context information as part of the RouteHandler instance that provides the proper execution context. In my case this ‘context’ was the method name, but it could be an actual static value like an enum identifying an operation or category in an application. Basically user supplied data comes in through the url and static application internal data can be passed via RouteHandler property values. Routing can make your application URLs easier to read by non-techie types regardless of whether you’re building Service type or REST applications, or full on Web interfaces. Routing in ASP.NET 4.0 makes it possible to create just about any extensionless URLs you can dream up and custom RouteHanmdler References Sample ProjectIncludes the sample CallbackHandler service discussed here along with compiled versionsof the Westwind.Web and Westwind.Utilities assemblies.  (requires .NET 4.0/VS 2010) West Wind Web Toolkit includes full implementation of CallbackHandler and the Routing Handler West Wind Web Toolkit Source CodeContains the full source code to the Westwind.Web and Westwind.Utilities assemblies usedin these samples. Includes the source described in the post.(Latest build in the Subversion Repository) CallbackHandler Source(Relevant code to this article tree in Westwind.Web assembly) JSONView FireFoxPluginA simple FireFox Plugin to easily view JSON data natively in FireFox.For IE you can use a registry hack to display JSON as raw text.© Rick Strahl, West Wind Technologies, 2005-2011Posted in ASP.NET  AJAX  HTTP  

  Read the article

• Keyboard navigation for jQuery Tabs

  - by Binyamin

  How to make Keyboard navigation left/up/right/down (like for photo gallery) feature for jQury Tabs with History? Demo without Keyboard feature in http://dl.dropbox.com/u/6594481/tabs/index.html Needed functions: 1. on keyboardtop/down make select and CSS showactivenested ajax tabs from 1-st to last level 2. on keyboardleft/right changeback/forwardcontent ofactivenested ajax tabs tab 3. an extra option, makeactivenested ajax tab on 'cursor-on' on concrete nested ajax tabs level Read more detailed question with example pictures in http://stackoverflow.com/questions/2975003/jquery-tools-to-make-keyboard-and-cookies-feature-for-ajaxed-tabs-with-history /** * @license * jQuery Tools @VERSION Tabs- The basics of UI design. * * NO COPYRIGHTS OR LICENSES. DO WHAT YOU LIKE. * * http://flowplayer.org/tools/tabs/ * * Since: November 2008 * Date: @DATE */ (function($) { // static constructs $.tools = $.tools || {version: '@VERSION'}; $.tools.tabs = { conf: { tabs: 'a', current: 'current', onBeforeClick: null, onClick: null, effect: 'default', initialIndex: 0, event: 'click', rotate: false, // 1.2 history: false }, addEffect: function(name, fn) { effects[name] = fn; } }; var effects = { // simple "toggle" effect 'default': function(i, done) { this.getPanes().hide().eq(i).show(); done.call(); }, /* configuration: - fadeOutSpeed (positive value does "crossfading") - fadeInSpeed */ fade: function(i, done) { var conf = this.getConf(), speed = conf.fadeOutSpeed, panes = this.getPanes(); if (speed) { panes.fadeOut(speed); } else { panes.hide(); } panes.eq(i).fadeIn(conf.fadeInSpeed, done); }, // for basic accordions slide: function(i, done) { this.getPanes().slideUp(200); this.getPanes().eq(i).slideDown(400, done); }, /** * AJAX effect */ ajax: function(i, done) { this.getPanes().eq(0).load(this.getTabs().eq(i).attr("href"), done); } }; var w; /** * Horizontal accordion * * @deprecated will be replaced with a more robust implementation */ $.tools.tabs.addEffect("horizontal", function(i, done) { // store original width of a pane into memory if (!w) { w = this.getPanes().eq(0).width(); } // set current pane's width to zero this.getCurrentPane().animate({width: 0}, function() { $(this).hide(); }); // grow opened pane to it's original width this.getPanes().eq(i).animate({width: w}, function() { $(this).show(); done.call(); }); }); function Tabs(root, paneSelector, conf) { var self = this, trigger = root.add(this), tabs = root.find(conf.tabs), panes = paneSelector.jquery ? paneSelector : root.children(paneSelector), current; // make sure tabs and panes are found if (!tabs.length) { tabs = root.children(); } if (!panes.length) { panes = root.parent().find(paneSelector); } if (!panes.length) { panes = $(paneSelector); } // public methods $.extend(this, { click: function(i, e) { var tab = tabs.eq(i); if (typeof i == 'string' && i.replace("#", "")) { tab = tabs.filter("[href*=" + i.replace("#", "") + "]"); i = Math.max(tabs.index(tab), 0); } if (conf.rotate) { var last = tabs.length -1; if (i < 0) { return self.click(last, e); } if (i > last) { return self.click(0, e); } } if (!tab.length) { if (current >= 0) { return self; } i = conf.initialIndex; tab = tabs.eq(i); } // current tab is being clicked if (i === current) { return self; } // possibility to cancel click action e = e || $.Event(); e.type = "onBeforeClick"; trigger.trigger(e, [i]); if (e.isDefaultPrevented()) { return; } // call the effect effects[conf.effect].call(self, i, function() { // onClick callback e.type = "onClick"; trigger.trigger(e, [i]); }); // default behaviour current = i; tabs.removeClass(conf.current); tab.addClass(conf.current); return self; }, getConf: function() { return conf; }, getTabs: function() { return tabs; }, getPanes: function() { return panes; }, getCurrentPane: function() { return panes.eq(current); }, getCurrentTab: function() { return tabs.eq(current); }, getIndex: function() { return current; }, next: function() { return self.click(current + 1); }, prev: function() { return self.click(current - 1); } }); // callbacks $.each("onBeforeClick,onClick".split(","), function(i, name) { // configuration if ($.isFunction(conf[name])) { $(self).bind(name, conf[name]); } // API self[name] = function(fn) { $(self).bind(name, fn); return self; }; }); if (conf.history && $.fn.history) { $.tools.history.init(tabs); conf.event = 'history'; } // setup click actions for each tab tabs.each(function(i) { $(this).bind(conf.event, function(e) { self.click(i, e); return e.preventDefault(); }); }); // cross tab anchor link panes.find("a[href^=#]").click(function(e) { self.click($(this).attr("href"), e); }); // open initial tab if (location.hash) { self.click(location.hash); } else { if (conf.initialIndex === 0 || conf.initialIndex > 0) { self.click(conf.initialIndex); } } } // jQuery plugin implementation $.fn.tabs = function(paneSelector, conf) { // return existing instance var el = this.data("tabs"); if (el) { return el; } if ($.isFunction(conf)) { conf = {onBeforeClick: conf}; } // setup conf conf = $.extend({}, $.tools.tabs.conf, conf); this.each(function() { el = new Tabs($(this), paneSelector, conf); $(this).data("tabs", el); }); return conf.api ? el: this; }; }) (jQuery); /** * @license * jQuery Tools @VERSION History "Back button for AJAX apps" * * NO COPYRIGHTS OR LICENSES. DO WHAT YOU LIKE. * * http://flowplayer.org/tools/toolbox/history.html * * Since: Mar 2010 * Date: @DATE */ (function($) { var hash, iframe, links, inited; $.tools = $.tools || {version: '@VERSION'}; $.tools.history = { init: function(els) { if (inited) { return; } // IE if ($.browser.msie && $.browser.version < '8') { // create iframe that is constantly checked for hash changes if (!iframe) { iframe = $("<iframe/>").attr("src", "javascript:false;").hide().get(0); $("body").append(iframe); setInterval(function() { var idoc = iframe.contentWindow.document, h = idoc.location.hash; if (hash !== h) { $.event.trigger("hash", h); } }, 100); setIframeLocation(location.hash || '#'); } // other browsers scans for location.hash changes directly without iframe hack } else { setInterval(function() { var h = location.hash; if (h !== hash) { $.event.trigger("hash", h); } }, 100); } links = !links ? els : links.add(els); els.click(function(e) { var href = $(this).attr("href"); if (iframe) { setIframeLocation(href); } // handle non-anchor links if (href.slice(0, 1) != "#") { location.href = "#" + href; return e.preventDefault(); } }); inited = true; } }; function setIframeLocation(h) { if (h) { var doc = iframe.contentWindow.document; doc.open().close(); doc.location.hash = h; } } // global histroy change listener $(window).bind("hash", function(e, h) { if (h) { links.filter(function() { var href = $(this).attr("href"); return href == h || href == h.replace("#", ""); }).trigger("history", [h]); } else { links.eq(0).trigger("history", [h]); } hash = h; window.location.hash = hash; }); // jQuery plugin implementation $.fn.history = function(fn) { $.tools.history.init(this); // return jQuery return this.bind("history", fn); }; })(jQuery); $(function() { $("#list").tabs("#content > div", {effect: 'ajax', history: true}); });

  Read the article

• Jquery Flexslider - can't see navigational images (manualControl)

  - by Kim Thomas

  I've spent a lot of time looking at the post on 3/13/12 re: manual controls, but isn't getting me all the way there...probably because I don't know jquery. Sorry, newbie on board. I'm trying to get the right/left arrows to show, as well as the 1, 2, 3...at the bottom. They are there, I see the lists on Firebug, just don't know how to add them to the "hook" (?) so they appear. Here is the code I have in header: <script src="http://ajax.googleapis.com/ajax/libs/jquery/1.7.1/jquery.min.js" type="text/javascript"></script> <script src="jquery.flexslider.js"></script> <script type="text/javascript" charset="utf-8"> $(window).load(function() { $('.flexslider').flexslider({ animation: "slide", slideshow: false, controlNav: true, manualControls: ".flex-control-nav li a", controlsContainer: ".flex-container" }); }); </script> Here is my html: <div class="flex-container"> <div class="flexslider"> <ul class="slides"> <li><img src="images/tah_home.jpg" alt="taylor art house home page" width="600" height="320"/> <p class="flex-caption">Taylor Art House Home Page</p></li> <li><img src="images/tah_blog.jpg" alt="taylor art house blog page" width="600" height="320" /> <p class="flex-caption">We created a blog that fits seemlessly into Taylor Art House's look</p></li> <li><img src="images/tah_artwork_page.jpg" alt="taylor art house art page" width="600" height="320" /> <p class="flex-caption">One of Taylor Art House's gallery pages, using a Wordpress plugin</p></li> <li><img src="images/tah_arch_portfolio.jpg" alt="jon taylor architecture portfolio page" width="600" height="320" /> <p class="flex-caption">We created links to toggle from TAH to Jon Taylor Architecture</p></li> </ul> </div><!--end flexsider--> </div><!--end flex-container--> Here is the Flexslider CSS: /* * jQuery FlexSlider v1.8 * http://www.woothemes.com/flexslider/ * * Copyright 2012 WooThemes * Free to use under the MIT license. * http://www.opensource.org/licenses/mit-license.php */ /* Browser Resets */ .flex-container a:active, .flexslider a:active, .flex-container a:focus, .flexslider a:focus {outline: none;} .slides, .flex-control-nav, .flex-direction-nav {margin: 0; padding: 0; list-style: none;} /* FlexSlider Necessary Styles *********************************/ .flexslider { width: 100%; margin: 0; padding: 0; } .flexslider .slides > li { display: none; -webkit-backface-visibility: hidden; } /* Hide the slides before the JS is loaded. Avoids image jumping */ .flexslider .slides img { max-width: 100%; display: block; } .flex-pauseplay span { text-transform: capitalize; } /* Clearfix for the .slides element */ .slides:after { content: "."; display: block; clear: both; visibility: hidden; line-height: 0; height: 0; } html[xmlns] .slides { display: block; } * html .slides { height: 1%; } /* No JavaScript Fallback */ /* If you are not using another script, such as Modernizr, make sure you * include js that eliminates this class on page load */ .no-js .slides > li:first-child { display: block; } /* FlexSlider Default Theme *********************************/ .flexslider { width: 600px; background: #fff; border: 4px solid #999; position: relative; margin: 30px 0; -webkit-border-radius: 5px; -moz-border-radius: 5px; -o-border-radius: 5px; border-radius: 5px; zoom: 1; } .flexslider .slides { zoom: 1; } .flexslider .slides > li { position: relative; } /* Suggested container for "Slide" animation setups. Can replace this with your own, if you wish */ .flex-container { zoom: 1; position: relative; margin-left:100px; } /* Caption style */ /* IE rgba() hack */ .flex-caption { background:none; -ms-filter:progid:DXImageTransform.Microsoft.gradient(startColorstr=#4C000000,endColorstr=#4C000000); filter:progid:DXImageTransform.Microsoft.gradient(startColorstr=#4C000000,endColorstr=#4C000000); zoom: 1; } .flex-caption { width: 96%; padding: 2%; margin: 0; position: absolute; left: 0; bottom: 0; background: rgba(0,0,0,.3); color: #fff; text-shadow: 0 -1px 0 rgba(0,0,0,.3); font-size: 14px; line-height: 18px; } /* Direction Nav */ .flex-direction-nav { height: 0; } .flex-direction-nav li a { width: 52px; height: 52px; margin: -13px 0 0; display: block; background: url(theme/bg_direction_nav.png) no-repeat; position: absolute; top: 50%; cursor: pointer; text-indent: -999em; } .flex-direction-nav li .next { background-position: -52px 0; right: -21px; } .flex-direction-nav li .prev { left: -20px; } .flex-direction-nav li .disabled { opacity: .3; filter:alpha(opacity=30); cursor: default; } /* Control Nav */ .flex-control-nav { width: 100%; position: absolute; bottom: -30px; text-align: center; } .flex-control-nav li { margin: 0 0 0 5px; display: inline-block; zoom: 1; *display: inline; } .flex-control-nav li:first-child { margin: 0; } .flex-control-nav li a { width: 13px; height: 13px; display: block; background: url(theme/bg_control_nav.png) no-repeat; cursor: pointer; text-indent: -999em; } .flex-control-nav li a:hover { background-position: 0 -13px; } .flex-control-nav li a.active { background-position: 0 -26px; cursor: default; } Here is how it appears in Firebug: <div class="flex-container"> <div class="flexslider" style="overflow: hidden;"> <ul class="slides" style="width: 1200%; margin-left: -1800px;"> <li class="clone" style="width: 600px; float: left; display: block;"> <li style="width: 600px; float: left; display: block;"> <li style="width: 600px; float: left; display: block;"> <li style="width: 600px; float: left; display: block;"> <li style="width: 600px; float: left; display: block;"> <li class="clone" style="width: 600px; float: left; display: block;"> </ul> </div> <ol class="flex-control-nav"> <li> <a class="">1</a> </li> <li> <li> <li> </ol> <ul class="flex-direction-nav"> <li> <a class="prev" href="#">Previous</a> </li> <li> <a class="next" href="#">Next</a> </li> </ul> </div> Finally, here is a link to the jsFiddle file (I saw someone wanted that in other flexslider post): http://jsfiddle.net/kthms/Wxmsp/ Link to page: http://www.kajortdesigns.com/tah.php I've tried every combo of class from the CSS in the manualControl: "", but I'm just guessing. If anyone can help this newbie out, I would be very appreciative. Explicit instructions are always appreciated.

  Read the article

• How to improve this piece of code

  - by user303518

  Can anyone help me on this. It may be very frustrating for you all. But I want you guys to take a moment to look at the code below and please tell me all the things that are wrong in the below piece of code. You can copy it into your visual studio to analyze this better. You don’t have to make this code compile. My task is to get the following things: Most obvious mistakes with this code All the things that are wrong/bad practices with the code below Modify/Write an optimized version of this code. Keep in mind, the code DOES NOT need to compile. Reduce the number of lines of code You should NEVER try to implement something like below: public List<ValidationErrorDto> ProcessEQuote(string eQuoteXml, long programUniversalID) { // Get Program Info. DataTable programs = GetAllPrograms(); DataRow[] programRows = programs.Select(string.Format("ProgramUniversalID = {0}", programUniversalID)); long programID = (long)programRows[0]["ProgramID"]; string programName = (string)programRows[0]["Description"]; // Get Config file values. string fromEmail = ConfigurationManager.AppSettings["eQuotesFromEmail"]; string technicalSupportPhone = ConfigurationManager.AppSettings["TechnicalSupportPhone"]; string fromEmailDisplayName = string.IsNullOrEmpty(ConfigurationManager.AppSettings["eQuotesFromDisplayName"]) ? null : string.Format(ConfigurationManager.AppSettings["eQuotesFromDisplayName"], programName); string itEmail = !string.IsNullOrEmpty(ConfigurationManager.AppSettings["ITEmail"]) ? ConfigurationManager.AppSettings["ITEmail"] : string.Empty; string itName = !string.IsNullOrEmpty(ConfigurationManager.AppSettings["ITName"]) ? ConfigurationManager.AppSettings["ITName"] : "IT"; try { List<ValidationErrorDto> allValidationErrors = new List<ValidationErrorDto>(); List<ValidationErrorDto> validationErrors = new List<ValidationErrorDto>(); if (validationErrors.Count == 0) { validationErrors.AddRange(ValidateEQuoteXmlAgainstSchema(eQuoteXml)); if (validationErrors.Count == 0) { XmlDocument eQuoteXmlDoc = new XmlDocument(); eQuoteXmlDoc.LoadXml(eQuoteXml); XmlElement rootElement = eQuoteXmlDoc.DocumentElement; XmlNodeList quotesList = rootElement.SelectNodes("Quote"); foreach (XmlNode node in quotesList) { // Each node should be a quote node but to be safe, check if (node.Name == "Quote") { string groupName = node.SelectSingleNode("Group/GroupName").InnerText; string groupCity = node.SelectSingleNode("Group/GroupCity").InnerText; string groupPostalCode = node.SelectSingleNode("Group/GroupZipCode").InnerText; string groupSicCode = node.SelectSingleNode("Group/GroupSIC").InnerText; string generalAgencyLicenseNumber = node.SelectSingleNode("Group/GALicenseNbr").InnerText; string brokerName = node.SelectSingleNode("Group/BrokerName").InnerText; string deliverToEmailAddress = node.SelectSingleNode("Group/ReturnEmailAddress").InnerText; string brokerEmail = node.SelectSingleNode("Group/BrokerEmail").InnerText; string groupEligibleEmployeeCountString = node.SelectSingleNode("Group/GroupNbrEmployees").InnerText; string quoteEffectiveDateString = node.SelectSingleNode("Group/QuoteEffectiveDate").InnerText; string salesRepName = node.SelectSingleNode("Group/SalesRepName").InnerText; string salesRepPhone = node.SelectSingleNode("Group/SalesRepPhone").InnerText; string salesRepEmail = node.SelectSingleNode("Group/SalesRepEmail").InnerText; string brokerLicenseNumber = node.SelectSingleNode("Group/BrokerLicenseNbr").InnerText; DateTime? quoteEffectiveDate = null; int eligibleEmployeeCount = int.Parse(groupEligibleEmployeeCountString); DateTime quoteEffectiveDateOut; if (!DateTime.TryParse(quoteEffectiveDateString, out quoteEffectiveDateOut)) validationErrors.Add(ValidationHelper.CreateValidationError((long)QuoteField.EffectiveDate, "Quote Effective Date", ValidationErrorDto.ValueOutOfRange, false, ValidationHelper.CreateValidationContext(Entity.QuoteDetail, "Quote"))); else quoteEffectiveDate = quoteEffectiveDateOut; Dictionary<string, string> replacementCodeValues = new Dictionary<string, string>(); if (string.IsNullOrEmpty(Resources.ParameterMessageKeys.ResourceManager.GetString("GroupName"))) throw new InvalidOperationException("GroupName key is not configured"); replacementCodeValues.Add(Resources.ParameterMessageKeys.GroupName, groupName); replacementCodeValues.Add(Resources.ParameterMessageKeys.ProgramName, programName); replacementCodeValues.Add(Resources.ParameterMessageKeys.SalesRepName, salesRepName); replacementCodeValues.Add(Resources.ParameterMessageKeys.SalesRepPhone, salesRepPhone); replacementCodeValues.Add(Resources.ParameterMessageKeys.SalesRepEmail, salesRepEmail); replacementCodeValues.Add(Resources.ParameterMessageKeys.TechnicalSupportPhone, technicalSupportPhone); replacementCodeValues.Add(Resources.ParameterMessageKeys.EligibleEmployeCount, eligibleEmployeeCount.ToString()); // Retrieve the CityID and StateID long? cityID = null; long? stateID = null; DataSet citiesAndStates = Addresses.GetCitiesAndStatesFromPostalCode(groupPostalCode); DataTable cities = citiesAndStates.Tables[0]; DataTable states = citiesAndStates.Tables[1]; DataRow[] cityRows = cities.Select(string.Format("Name = '{0}'", groupCity)); if (cityRows.Length > 0) { cityID = (long)cityRows[0]["CityID"]; DataRow[] stateRows = states.Select(string.Format("CityID = {0}", cityID)); if (stateRows.Length > 0) stateID = (long)stateRows[0]["StateID"]; } // If the StateID does not exist, then we cannot get the GeneralAgency, so set a validation error and do not contine. // Else, Continue and look for an General Agency. If a GA was found, look for or create a Broker. Then look for or create a Prospect Group // Then using the info, create a quote. if (!stateID.HasValue) validationErrors.Add(ValidationHelper.CreateValidationError((long)ProspectGroupField.State, "Prospect Group State", ValidationErrorDto.RequiredFieldMissing, false, ValidationHelper.CreateValidationContext(Entity.ProspectGroup, "Prospect Group"))); bool brokerValidationError = false; SalesRepDto salesRep = GetSalesRepByEmail(salesRepEmail, ref validationErrors); if (salesRep == null) { string exceptionMessage = "Sales Rep Not found in Opportunity System. Please make sure Sales Rep is present in the system by adding the sales rep in AWP SR Add Screen." + Environment.NewLine; exceptionMessage = exceptionMessage + " Sales Rep Name: " + salesRepName + Environment.NewLine; exceptionMessage = exceptionMessage + " Sales Rep Email: " + salesRepEmail + Environment.NewLine; exceptionMessage = exceptionMessage + " Module : E-Quote Service" + Environment.NewLine; throw new Exception(exceptionMessage); } if (validationErrors.Count == 0) { // Note that StateID and EffectiveDate should be valid at this point. If it weren't there would be validation errors. // Find General Agency long? generalAgencyID; validationErrors.AddRange(GetEQuoteGeneralAgency(generalAgencyLicenseNumber, stateID.Value, out generalAgencyID)); // If GA was found, check for Broker. if (validationErrors.Count == 0 && generalAgencyID.HasValue) { Dictionary<string, string> brokerNameParts = ContactHelper.GetNamePartsFromFullName(brokerName); long? brokerID; validationErrors.AddRange(CreateEQuoteBroker(brokerNameParts["FirstName"], brokerNameParts["LastName"], brokerEmail, brokerLicenseNumber, stateID.Value, generalAgencyID.Value, salesRep, programID, out brokerID)); // If Broker was found but had validation errors if (validationErrors.Count > 0) { DeliverEmailMessage(programID, quoteEffectiveDate.Value, fromEmail, fromEmailDisplayName, itEmail, DocumentType.EQuoteBrokerValidationFailureMessageEmail, replacementCodeValues); brokerValidationError = true; } // If Broker was found, check for Prospect Group if (validationErrors.Count == 0 && brokerID.HasValue) { long? prospectGroupID; validationErrors.AddRange(CreateEQuoteProspectGroup(groupName, cityID, stateID, groupPostalCode, groupSicCode, brokerID.Value, out prospectGroupID)); if (validationErrors.Count == 0 && prospectGroupID.HasValue) { if (validationErrors.Count == 0) { long? quoteID; validationErrors.AddRange(CreateEQuote(programID, prospectGroupID.Value, generalAgencyID.Value, quoteEffectiveDate.Value, eligibleEmployeeCount, deliverToEmailAddress, node.SelectNodes("Employees/Employee"), deliverToEmailAddress, out quoteID)); if (validationErrors.Count == 0 && quoteID.HasValue) { QuoteFromServiceDto quoteFromService = GetQuoteByQuoteID(quoteID.Value); // Generate Pre-Message replacementCodeValues.Add(Resources.ParameterMessageKeys.QuoteNumber, string.Format("{0}.{1}", quoteFromService.QuoteNumber, quoteFromService.QuoteVersion)); replacementCodeValues.Add(Resources.ParameterMessageKeys.Name, brokerName); replacementCodeValues.Add(Resources.ParameterMessageKeys.LicenseNumbers, brokerLicenseNumber); DeliverEmailMessage(programID, quoteEffectiveDate.Value, fromEmail, fromEmailDisplayName, deliverToEmailAddress, DocumentType.EQuotePreMessageEmail, replacementCodeValues); bool quoteGenerated = false; try { quoteGenerated = GenerateAndDeliverInitialQuote(quoteID.Value); } catch (Exception exception) { TraceLogger.LogException(exception, LoggingCategory); if (replacementCodeValues.ContainsKey(Resources.ParameterMessageKeys.Name)) replacementCodeValues[Resources.ParameterMessageKeys.Name] = itName; else replacementCodeValues.Add(Resources.ParameterMessageKeys.Name, itName); if (replacementCodeValues.ContainsKey(Resources.ParameterMessageKeys.Errors)) replacementCodeValues[Resources.ParameterMessageKeys.Errors] = string.Format("Errors:\r\n:{0}", exception); else replacementCodeValues.Add(Resources.ParameterMessageKeys.Errors, string.Format("Errors:\r\n:{0}", exception)); DeliverEmailMessage(programID, quoteEffectiveDate.Value, fromEmail, fromEmailDisplayName, itEmail, DocumentType.EQuoteSystemFailureMessageEmail, replacementCodeValues); } if (!quoteGenerated) { // Generate System Failure Message if (replacementCodeValues.ContainsKey(Resources.ParameterMessageKeys.Name)) replacementCodeValues[Resources.ParameterMessageKeys.Name] = brokerName; else replacementCodeValues.Add(Resources.ParameterMessageKeys.Name, brokerName); if (replacementCodeValues.ContainsKey(Resources.ParameterMessageKeys.Errors)) replacementCodeValues[Resources.ParameterMessageKeys.Errors] = string.Empty; else replacementCodeValues.Add(Resources.ParameterMessageKeys.Errors, string.Empty); DeliverEmailMessage(programID, quoteEffectiveDate.Value, fromEmail, fromEmailDisplayName, itEmail, DocumentType.EQuoteSystemFailureMessageEmail, replacementCodeValues); } } } } } } } //if (validationErrors.Count > 0) // Per spec, if Broker Validation returned an error we already sent an email, don't send another generic one if (validationErrors.Count > 0 && (!brokerValidationError)) { StringBuilder errorString = new StringBuilder(); foreach (ValidationErrorDto validationError in validationErrors) errorString = errorString.AppendLine(string.Format(" - {0}", ValidationHelper.GetValidationErrorReason(validationError, true))); replacementCodeValues.Add(Resources.ParameterMessageKeys.Errors, errorString.ToString()); if (replacementCodeValues.ContainsKey(Resources.ParameterMessageKeys.Name)) replacementCodeValues[Resources.ParameterMessageKeys.Name] = brokerName; else replacementCodeValues.Add(Resources.ParameterMessageKeys.Name, brokerName); // HACK: If there is no effective date, then use Today's date. Do we care about the effecitve dat on validation message? if (quoteEffectiveDate.HasValue) DeliverEmailMessage(programID, quoteEffectiveDate.Value, fromEmail, fromEmailDisplayName, itEmail, DocumentType.EQuoteValidationFailureMessageEmail, replacementCodeValues); else DeliverEmailMessage(programID, DateTime.Now, fromEmail, fromEmailDisplayName, itEmail, DocumentType.EQuoteValidationFailureMessageEmail, replacementCodeValues); } allValidationErrors.AddRange(validationErrors); validationErrors.Clear(); } } } else { // Use todays date as the effective date. Dictionary<string, string> replacementCodeValues = new Dictionary<string, string>(); StringBuilder errorString = new StringBuilder(); foreach (ValidationErrorDto validationError in validationErrors) errorString = errorString.AppendLine(string.Format(" - {0}", ValidationHelper.GetValidationErrorReason(validationError, true))); replacementCodeValues.Add(Resources.ParameterMessageKeys.Errors, string.Format("The following validation errors occurred: \r\n{0}", errorString)); replacementCodeValues.Add(Resources.ParameterMessageKeys.ProgramName, programName); replacementCodeValues.Add(Resources.ParameterMessageKeys.GroupName, "Group"); replacementCodeValues.Add(Resources.ParameterMessageKeys.Name, itName); DeliverEmailMessage(programID, DateTime.Now, fromEmail, null, itEmail, DocumentType.EQuoteSystemFailureMessageEmail, replacementCodeValues); allValidationErrors.AddRange(validationErrors); validationErrors.Clear(); } } return allValidationErrors; } catch (Exception exception) { TraceLogger.LogException(exception, LoggingCategory); // Use todays date as the effective date. Dictionary<string, string> replacementCodeValues = new Dictionary<string, string>(); replacementCodeValues.Add(Resources.ParameterMessageKeys.ProgramName, programName); replacementCodeValues.Add(Resources.ParameterMessageKeys.GroupName, "Group"); replacementCodeValues.Add(Resources.ParameterMessageKeys.Name, itName); replacementCodeValues.Add(Resources.ParameterMessageKeys.Errors, string.Format("Errors:\r\n:{0}", exception)); DeliverEmailMessage(programID, DateTime.Now, fromEmail, null, itEmail, DocumentType.EQuoteSystemFailureMessageEmail, replacementCodeValues); throw new FaultException(exception.ToString()); } }

  Read the article

< Previous Page | 62 63 64 65 66 67  | Next Page >