Search Results

Search found 30127 results on 1206 pages for 'home network'.

Page 66/1206 | < Previous Page | 62 63 64 65 66 67 68 69 70 71 72 73  | Next Page >

• Mysterious problem...can remotely connect to a system but can't browse back out.

  - by GregH

  I have LogMeIn installed on my home system. I went on travel and my wife called saying that none of our home systems could browse the internet. I thought I would try to connect to my home system using logmein. Surprisingly, I was able to connect to my home system and log in without any problems using logmein. When I opened a browser from my home system, I indeed could not browse. I opened a command prompt and tried to ping my router (192.168.1.1) and it failed/timed out. How is this possible? I can remotely connect to my system but once logged in cannot even ping my router. What's up with that?

  Read the article

• WPA2 authentication fails using USB network devices (Linksys and Rosewill)

  - by Greg Youtz

  Decided to reduce the clutter in the house and replace a wired connection with a wireless one on my wife's system using USB network device Rosewill RNX-X1. I can see and connect to unprotected network, but WPA2 authentication repeatedly fails. Tried the same with a Linksys USB network adapter. Both failed to authenticate. Worth noting that I recently switched from Comcast to CenturyLink and so switched routers. The system connected successfully to previous router (Linksys EA4500) using WPA2. Would think it is the router (Actiontec C1000A) but all other devices (TV, iPad, Windows, Blackberry, and Squeezebox) connect ok. Would appreciate some diagnostic guidance and insight (phrased for a newbie!) Tests to date: sudo lshw -class network *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: 01 serial: 00:e0:4d:30:40:a1 size: 10Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=N/A latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:47 ioport:ac00(size=256) memory:fdcff000-fdcfffff memory:fdb00000-fdb1ffff *-network description: Wireless interface physical id: 1 bus info: usb@1:2 logical name: wlan1 serial: 00:02:6f:bd:30:a0 capabilities: ethernet physical wireless configuration: broadcast=yes driver=rt2800usb driverversion=3.2.0-31-generic firmware=0.29 link=no multicast=yes wireless=IEEE 802.11bgn sudo lspci -v 00:00.0 RAM memory: NVIDIA Corporation MCP67 Memory Controller (rev a2) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0 Capabilities: [44] HyperTransport: Slave or Primary Interface Capabilities: [dc] HyperTransport: MSI Mapping Enable+ Fixed- 00:01.0 ISA bridge: NVIDIA Corporation MCP67 ISA Bridge (rev a2) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0 00:01.1 SMBus: NVIDIA Corporation MCP67 SMBus (rev a2) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: 66MHz, fast devsel, IRQ 11 I/O ports at fc00 [size=64] I/O ports at 1c00 [size=64] I/O ports at 1c40 [size=64] Capabilities: [44] Power Management version 2 Kernel driver in use: nForce2_smbus Kernel modules: i2c-nforce2 00:01.2 RAM memory: NVIDIA Corporation MCP67 Memory Controller (rev a2) Flags: 66MHz, fast devsel 00:02.0 USB controller: NVIDIA Corporation MCP67 OHCI USB 1.1 Controller (rev a2) (prog-if 10 [OHCI]) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23 Memory at fe02f000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 Kernel driver in use: ohci_hcd 00:02.1 USB controller: NVIDIA Corporation MCP67 EHCI USB 2.0 Controller (rev a2) (prog-if 20 [EHCI]) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22 Memory at fe02e000 (32-bit, non-prefetchable) [size=256] Capabilities: [44] Debug port: BAR=1 offset=0098 Capabilities: [80] Power Management version 2 Kernel driver in use: ehci_hcd 00:04.0 USB controller: NVIDIA Corporation MCP67 OHCI USB 1.1 Controller (rev a2) (prog-if 10 [OHCI]) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21 Memory at fe02d000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 Kernel driver in use: ohci_hcd 00:04.1 USB controller: NVIDIA Corporation MCP67 EHCI USB 2.0 Controller (rev a2) (prog-if 20 [EHCI]) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 20 Memory at fe02c000 (32-bit, non-prefetchable) [size=256] Capabilities: [44] Debug port: BAR=1 offset=0098 Capabilities: [80] Power Management version 2 Kernel driver in use: ehci_hcd 00:06.0 IDE interface: NVIDIA Corporation MCP67 IDE Controller (rev a1) (prog-if 8a [Master SecP PriP]) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0 [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8] [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1] [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8] [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1] I/O ports at f000 [size=16] Capabilities: [44] Power Management version 2 Kernel driver in use: pata_amd Kernel modules: pata_amd 00:07.0 Audio device: NVIDIA Corporation MCP67 High Definition Audio (rev a1) Subsystem: Biostar Microtech Int'l Corp Device 820c Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22 Memory at fe024000 (32-bit, non-prefetchable) [size=16K] Capabilities: [44] Power Management version 2 Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+ Capabilities: [6c] HyperTransport: MSI Mapping Enable- Fixed+ Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel 00:08.0 PCI bridge: NVIDIA Corporation MCP67 PCI Bridge (rev a2) (prog-if 01 [Subtractive decode]) Flags: bus master, 66MHz, fast devsel, latency 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: fdf00000-fdffffff Prefetchable memory behind bridge: fd000000-fd0fffff Capabilities: [b8] Subsystem: NVIDIA Corporation Device cb84 Capabilities: [8c] HyperTransport: MSI Mapping Enable- Fixed- 00:09.0 IDE interface: NVIDIA Corporation MCP67 AHCI Controller (rev a2) (prog-if 85 [Master SecO PriO]) Subsystem: Biostar Microtech Int'l Corp Device 5407 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23 I/O ports at 09f0 [size=8] I/O ports at 0bf0 [size=4] I/O ports at 0970 [size=8] I/O ports at 0b70 [size=4] I/O ports at dc00 [size=16] Memory at fe02a000 (32-bit, non-prefetchable) [size=8K] Capabilities: [44] Power Management version 2 Capabilities: [8c] SATA HBA v1.0 Capabilities: [b0] MSI: Enable- Count=1/8 Maskable- 64bit+ Capabilities: [cc] HyperTransport: MSI Mapping Enable- Fixed+ Kernel driver in use: ahci 00:0b.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000b000-0000bfff Memory behind bridge: fde00000-fdefffff Prefetchable memory behind bridge: 00000000fdd00000-00000000fddfffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:0c.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 0000a000-0000afff Memory behind bridge: fdc00000-fdcfffff Prefetchable memory behind bridge: 00000000fdb00000-00000000fdbfffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:0d.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 I/O behind bridge: 00009000-00009fff Memory behind bridge: fda00000-fdafffff Prefetchable memory behind bridge: 00000000fd900000-00000000fd9fffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:0e.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=05, subordinate=05, sec-latency=0 I/O behind bridge: 00008000-00008fff Memory behind bridge: fd800000-fd8fffff Prefetchable memory behind bridge: 00000000fd700000-00000000fd7fffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:0f.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=06, subordinate=06, sec-latency=0 I/O behind bridge: 00007000-00007fff Memory behind bridge: fd600000-fd6fffff Prefetchable memory behind bridge: 00000000fd500000-00000000fd5fffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:10.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=07, subordinate=07, sec-latency=0 I/O behind bridge: 00006000-00006fff Memory behind bridge: fd400000-fd4fffff Prefetchable memory behind bridge: 00000000fd300000-00000000fd3fffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:11.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=08, subordinate=08, sec-latency=0 I/O behind bridge: 00005000-00005fff Memory behind bridge: fd200000-fd2fffff Prefetchable memory behind bridge: 00000000fd100000-00000000fd1fffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:12.0 VGA compatible controller: NVIDIA Corporation C68 [GeForce 7050 PV / nForce 630a] (rev a2) (prog-if 00 [VGA controller]) Subsystem: Biostar Microtech Int'l Corp Device 1406 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21 Memory at fb000000 (32-bit, non-prefetchable) [size=16M] Memory at e0000000 (64-bit, prefetchable) [size=256M] Memory at fc000000 (64-bit, non-prefetchable) [size=16M] [virtual] Expansion ROM at 80000000 [disabled] [size=128K] Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+ Kernel driver in use: nvidia Kernel modules: nvidia_current, nouveau, nvidiafb 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration Flags: fast devsel Capabilities: [80] HyperTransport: Host or Secondary Interface 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map Flags: fast devsel 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller Flags: fast devsel 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control Flags: fast devsel Capabilities: [f0] Secure device <?> Kernel driver in use: k8temp Kernel modules: k8temp 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01) Subsystem: Biostar Microtech Int'l Corp Device 2305 Flags: bus master, fast devsel, latency 0, IRQ 47 I/O ports at ac00 [size=256] Memory at fdcff000 (64-bit, non-prefetchable) [size=4K] [virtual] Expansion ROM at fdb00000 [disabled] [size=128K] Capabilities: [40] Power Management version 2 Capabilities: [48] Vital Product Data Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] Express Endpoint, MSI 00 Capabilities: [84] Vendor Specific Information: Len=4c <?> Capabilities: [100] Advanced Error Reporting Capabilities: [12c] Virtual Channel Capabilities: [148] Device Serial Number 32-00-00-00-10-ec-81-68 Capabilities: [154] Power Budgeting <?> Kernel driver in use: r8169 Kernel modules: r8169 sudo rfkill list all 2: phy2: Wireless LAN Soft blocked: no Hard blocked: no Would appreciate insight on how to chase this down.

  Read the article

• Network really slow with TL-WN951N wireless card

  - by Sam

  I literally just installed ubuntu and it seems to be working great except the network is deadly slow. I'm running a TL-WN951N wireless card which can download at about 600-700 KB/s in windows but in Ubuntu the max speed it seems to get is around 5KB/s. I guess I should note that my WAP is only wireless-G but like I said, I can get much better speeds in Windows. I'm testing the speeds by downloading files from here: http://mirror.internode.on.net/pub/test/ Anyone have any idea? I saw some people recommend downloading drivers and compiling them myself but I'm really really new to all of this so would appreciate someone babying me through it so I don't brick my computer! Here are the results of lspci -v: 04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02) Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard Flags: bus master, fast devsel, latency 0, IRQ 44 I/O ports at c000 [size=256] Memory at e9110000 (64-bit, prefetchable) [size=4K] Memory at e9100000 (64-bit, prefetchable) [size=64K] [virtual] Expansion ROM at e9120000 [disabled] [size=64K] Capabilities: <access denied> Kernel driver in use: r8169 Kernel modules: r8169 05:02.0 Network controller: Atheros Communications Inc. AR5008 Wireless Network Adapter (rev 01) Subsystem: Atheros Communications Inc. Device 3071 Flags: bus master, 66MHz, medium devsel, latency 168, IRQ 18 Memory at e9200000 (32-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: ath9k Kernel modules: ath9k

  Read the article

• Trouble installing Server 12.10 - Dead keyboard, Blank Screen, Network Config

  - by Mikey

  Installing 12.10 server from cd - minimal installation: basic system, ssh server,postgreSQL, manual updates. Hardware is brand new HP server that also runs Win 2003 Server Standard as a DNC excellently - I installed the grub boot manager on the primary partition and it is working fine - can boot to Win or Ubuntu without issue. Everything seemed to go OK on the installation - BUT when I restarted the system after install and booted to Ubuntu, I got the command prompt for Ubuntu, but the keyboard was UNREPSONSIVE - dead. There is nothing wrong with the keyboard - works fine if I boot to Win. With a completely unrepsonsive keyboard I had to hit the power switch - when I restarted and booted to Ubuntu, Ubuntu started but no command prompt came up at all - just black screen. I powered down and rebooted to advanced Ubuntu options - it tried to reinstall/initliaze a long list of packages - when it got to 'waiting for network configuration' it waited, then a message 'waiting 60 seconds for network configuration'... it waited 60 seconds and then I got a 'failed to configure network message' and it continued. Finally it finished, I hit enter and got to a prompt - but again, keyboard UNREPSONSIVE - dead. I went through this several times - tried 'repairing broken installation' option and also reinstalling entirely - always same results. I am flummoxed. The only clue I have is that for the Windows DNC config, the IP address is static - not via DHCP. But I don't think that should impact Ubuntu at all - perhaps I am mistaken. What is wrong?

  Read the article

• Ask The Readers: How Do You Camouflage Your Tech?

  - by Jason Fitzpatrick

  We love having a technology-packed house as much as the next geek, but not all our gizmos, gadgets, and peripherals are exactly Home and Garden approved. How do you enjoy all your tech without your living room and office looking like an electronics store? Image courtesy of Weekly Geek’s DIY charging station tutorial. Whether it’s to hide the insanely intense LEDS, minimize the visual clutter, or to boost the wife/husband acceptance factor of your geeky hobbies higher, there’s a variety of reasons for wrangling cables, hiding routers, or otherwise camouflaging your gear. This week we want to hear all about your tips for hiding or otherwise minimizing the appearance of gear around your home, office, and other personal spaces. Sound off in the comments with your best tips, trick, and camouflaging techniques; check back in on Friday for the What You Said roundup. HTG Explains: How Windows 8′s Secure Boot Feature Works & What It Means for Linux Hack Your Kindle for Easy Font Customization HTG Explains: What Is RSS and How Can I Benefit From Using It?

  Read the article

• Sitemap structure for network of subdomains

  - by HaCos

  I am working on a project that's a network of 2 domains (domain.gr & domain.com.cy) of subdomains similar to Hubpages [each user gets a profile under a different subdomain & there is a personal blog for that user as well] and I think there is something wrong with our sitemap submission. Sometimes it takes weeks in order a new profiles to get indexed. We make use of one Webmasters account in order to manage all network and we don't want to create different accounts for each subdomain since there are more than 1000 already. According to this post http://goo.gl/KjMCjN, I end up on a structure of 5 sitemaps with the following structure : 1st sitemap will be for indexing the others. 2nd sitemap for all users profile under the domain.gr 3nd sitemap for all users profile under the domain.com.cy 4th sitemap for all posts under the *.domain.gr - news sitemap http://goo.gl/8A8S9f 5th sitemap for all posts under the *.domain.com.cy - news sitemap again Now my questions: Should we create news sitemaps or just list all post in 2nd & 3rd sitemap? Does links ordering has anything to do? Eg: Most recent user created be first in sitemap or doesn't make any different and we just need to make sure that lastmod date is correct? Does anyone guess how Hubpages submit their sitemap in Webmasters so maybe we could follow there way? Any alternative or better way to index this kind of schema? PS: Our network is multi language - Greek & English are available. We make use of hreflang tags on the head of each page to separate country target of each version.

  Read the article

• Exempt programs from using active VPN connection

  - by Oxwivi

  When I connect to a VPN, all my network traffic is automatically routed through it. Is there a way to add exemptions to that? I don't know if adding exceptions has anything to do with the VPN protocol, but the VPN I'm using is of the OpenVPN protocol. Speaking of OpenVPN, why is it not installed by default on Ubuntu installs unlike PPTP? I could not get the list of IRCHighWay's servers, and this is the result I get trying to connect on XChat with running the bash script running: * Looking up irc.irchighway.net * Connecting to irc.irchighway.net (65.23.153.98) port 6667... * Connected. Now logging in... * You have been K-Lined. * *** You are not welcome on this network. * *** K-Lined for Open proxies are not allowed. (2011/02/26 01.21) * *** Your IP is 173.0.14.9 * *** For assistance, please email [email protected] and include everything shown here. * Closing Link: 0.0.0.0 (Open proxies are not allowed. (2011/02/26 01.21)) * Disconnected (Remote host closed socket). The IP 173.0.14.9 is the one due to my VPN. I had forgotten to check ip route list before running the script, and this is the one after running it: ~$ ip route list 99.192.193.241 dev ppp0 proto kernel scope link src 173.0.14.9 173.0.14.2 via 192.168.1.1 dev eth1 proto static 173.0.14.2 via 192.168.1.1 dev eth1 src 192.168.1.3 192.168.1.0/24 dev eth1 proto kernel scope link src 192.168.1.3 metric 2 169.254.0.0/16 dev eth1 scope link metric 1000 default dev ppp0 proto static Oh and running the script returned this output: ~$ sudo bash irc_route.sh Usage: inet_route [-vF] del {-host|-net} Target[/prefix] [gw Gw] [metric M] [[dev] If] inet_route [-vF] add {-host|-net} Target[/prefix] [gw Gw] [metric M] [netmask N] [mss Mss] [window W] [irtt I] [mod] [dyn] [reinstate] [[dev] If] inet_route [-vF] add {-host|-net} Target[/prefix] [metric M] reject inet_route [-FC] flush NOT supported I ran the script after connecting to the VPN.

  Read the article

• Why is the root partition on my disk full?

  - by Agmenor

  I installed Ubuntu 12.04 by doing a fresh install where there was previously Ubuntu 11.10. My computer warns me now that my disk is nearly full. After having run apt-get purge, run apt-get autoremove and emptied the Trash can, I still have this problem as shown by this screenshot of Gparted: The disk /dev/sda7 is indeed full. I ran the Disk Usage Analyzer (Baobab) and I am still not sure of what is happening: One of my hypothesis is that when installing Ubuntu 12.04, I didn't configure my disks well and the disk /dev/sda6 is not mounted well as /home. Is this the reason indeed? What should I do to verify this and then to get the things fixed? Here are a few additional details to answer the questions I received (thank you everybody): My home directory is not encrypted. The Backup utility (Déjà Dup) is not set for automatic backups. (I do it myself and manually.) After I mount /dev/sda6, the command df -h gives Filesystem Size Used Avail Use% Mounted on /dev/sda7 244G 221G 12G 96% / udev 3,9G 4,0K 3,9G 1% /dev tmpfs 1,6G 904K 1,6G 1% /run none 5,0M 0 5,0M 0% /run/lock none 3,9G 164K 3,9G 1% /run/shm /dev/sda6 653G 189G 433G 31% /media/8ec2fa69-039b-4c52-ab1b-034d785132a1 (sorry but formatting this into code does not work, for an unknown reason) Thanks to izx's post, I realized /dev/sda6 was not even mounted before. It contains all the documents I used to have when I was running Ubuntu 11.10.

  Read the article

• Add static ARP entries when network is brought up

  - by jozzas

  I have some pretty dumb IP devices on a subnet with my Ubuntu server, and the server receives streaming data from each device. I have run into a problem in that when an ARP request is issued to the device while it is streaming data to the server, the request is ignored, the cache entry times out and the server stops receiving the stream. So, to prevent the server from sending ARP requests to these devices altogether, I would like to add a static ARP entry for each, something like arp -i eth2 -s ip.of.the.device mac:of:the:device But these "static" ARP entries are lost if networking is disabled / enabled or if the server is rebooted. Where is the best place to automatically add these entries, preferably somewhere that will re-add them every time the interface eth2 is brought up? I really don't want to have to write a script that monitors the output of arp and re-adds the cache entries if they're missing. Edit to add what my final script was: Created the file /etc/network/if-up.d/add-my-static-arp With the contents: #!/bin/sh arp -i eth0 -s 192.168.0.4 00:50:cc:44:55:55 arp -i eth0 -s 192.168.0.5 00:50:cc:44:55:56 arp -i eth0 -s 192.168.0.6 00:50:cc:44:55:57 And then obviously add the permission to allow it to be executed: chmod +x /etc/network/if-up.d/add-my-static-arp And these arp entries will be manually added or re-added every time any network interface is brought up.

  Read the article

• How to make a btrfs snapshot?

  - by MountainX

  My /home partition consists of an entire physical disk. It is formatted as btrfs. I want to snapshot it. I'm confused regarding subvolume naming, in particular. I am aware that there are similar questions, but each similar question seems to be asking something different from what I'm asking (and they are older, which means probably outdated, given the rapid development of btrfs). For example, the answer to this question is apparently not the answer to my question because my /home partition is a separate volume and the man page for btrfs shows a different command for creating snapshots now. another similar problem, no solid solution. someone else as confused as me on the naming issues My question: Starting simple: is this the correct command to take a simple snapshot of my home partition? btrfs subvolume snapshot /home/@home /home/@home_snapshot_20120421 I got really brave and tested it and it does not work. The error is error accessing /home/@home. As shown below, @home is listed. I'm obviously confused on subvolume names. Do I need to use them in creating snapshots? Some examples show taking snapshots of home using /home as the source parameter, but based on examples of root volumes, it seems to me that I need to use /home/@home. Would this command work? And if not, why? btrfs subvolume snapshot /home /home/@home_snapshot_20120421 Is the @ just a naming convention? Is it meaningful at all? Here's some output that may be relevant: btrfs subvolume list /home ID 256 top level 5 path @home I'm not sure what that means, exactly. When I try btrfs device scan it gives an error (e.g. unable to scan the device /dev/sda1). My file system doesn't have any errors. Everything is fine.

  Read the article

• The latest Oracle Social Network News from Open World

  - by me

  Highlights Oracle and Partners showcase the latest development around  Oracle Social Network  (OSN) Integration of OSN Social Fabric into Business Applications like Finance, HCM and Customer Experience Partners like Cisco WebEx, Avaya, Weemo, Lingotek and HarQen showcase OSN integration Oracle shares details around internal OSN deployment Please visit us at 2413 Moscone South  Exhibition Hall  and  experience a live OSN demo Social Fabric  Oracle Social Network socializes your Applications, Process and Content within your Enterprise. Here are some examples what is shown at Oracle Open World. Socialize the Finance department Enable Finance departments to collaborate instantly during quarter close with real-time information access Enable finance professionals in the back office to easily interact with the rest of the company Provide privacy when discussing sensitive financial results within Conversations  Socialize Human Capital Management (HCM) Promotes attainable performance goals that achieve the business objectives of the enterprise Capture expertise across the network Continuous feedback loop provided that results in productivity and innovation improvement tied to higher employee engagement OSN and Customer Experience Find the person with the best skills to assist with the issue Real-time collaboration in  context of the issue Track an Agent’s collaboration contributions Identify and contribute relevant knowledge back to the system Cisco/Webex integration The Web Conferencing tool of your choice can be integrated with OSN. In the example below you can see the integration of the Cisco WebEx solution into OSN. and sure - this works on mobile devices as well  OSN @ Oracle Oracle has deployed OSN as part of the internal Fusion CRM application rollout. After just 4 month we can see impressive usage patterns.

  Read the article

• Problems with wired ethernet connection Ubuntu 11.10

  - by Andrew Fielden

  After some partition shuffling, I've got a problem on my 11.10 system. The wired ethernet interface fails to come up, although the wireless interface is working. I'm using NetworkManager. I thought this may be a problem with NetworkManager, so I checked the config files, which look ok. I then tried re-installing the package, but this didn't resolve the issues. I'm not sure at this point if the problem is due to software configuration, or a hardware problem. I've also tried the cable in other router ports, but same problem. The symptoms are:- System settings - Network reports that the cable is unplugged (it isn't) ifconfig reports the following eth0 Link encap:Ethernet HWaddr f0:4d:a2:a2:a7:fe UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:10 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:792 (792.0 B) TX bytes:0 (0.0 B) Interrupt:46 Base address:0xe000 My /etc/network/interfaces file has the following: auto lo iface lo inet loopback My /etc/resolv.conf file has the following: # Generated by NetworkManager The router's red light is on for this port dmesg reports ADDRCONF(NETDEV_UP): eth0: link is not ready

  Read the article

• set tap0 using virt-manager for bridged wireless

  - by DaveO

  After 3 days I finally have kvm guests working on the network via wireless (link below - thanks!): My network is 192.168.1.0/24 on the host: sudo sh -c "echo 1 > /proc/sys/net/ipv4/ip_forward" sudo tunctl -t tap0 sudo ip link set tap0 up sudo ip addr add 192.168.1.25/24 dev tap0 sudo route add -host 192.168.1.30 dev tap0 sudo parprouted wlan0 tap0 on the guest: auto eth0 iface eth0 inet static address 192.168.1.30 netmask 255.255.255.0 network 192.168.1.0 broadcast 192.168.1.255 gateway 192.168.1.25 and start the guest: sudo kvm /path/to/guest.img -net nic,macaddr=DE:AD:BE:EF:90:26 -net tap,ifname=tap0,script=no This works great and I can ping the local network and the internet back and forth between the guest. But how do I add these settings to the guest's xml config so I can start the guest via virt-manager with the same nic settings? ref: http://www.linuxquestions.org/questions/debian-26/kvm-wireless-bridge-network-691953/

  Read the article

• Intermittent ethernet connectivity

  - by Amey Jah

  I am facing a weird problem. I am connecting to my dsl modem via ethernet. After booting, sometimes Ubuntu 10.10 does not detect the eth0 card properly or does not connect to the modem. I have made the following observations: My modem is fully on. All indicators are on except ethernet, which is blinking continuously. My network indicator applet informs me that I am connected to modem, but I am not able to browse as it has not established connection with modem. I need to power off and on (restart) the modem several times OR disconnect/connect (via network applet) several times, before the system can establish a connection with the modem. Once it establishes the connection, the ethernet LED (on modem) stops blinking and glows continuously. However, I do not see this problem every time I reboot or start my computer. 3/5 time, it connects to the modem in a single attempt. Friends, I am not able to understand root cause of this problem. Plus I do not know what kind of logs should be attached. If you want any logs please give me command to run, and I will paste the result for you. Note: I ran system testing when above problem happened. Follow this link to download result.

  Read the article

• Wifi - wireless network not working after installing Ubuntu 12.04

  - by Nilesh

  I had installed ubuntu 12.04 in my Dell Vostro 3460. Initially wired as well wireless both are not working. After installing compat-wireless-2012-07-03-pc.tar.bz2 wired network fine but wireless is not working. Previously both were working fine with ubuntu 11.10. Also presently both network are working fine in Win7. lspci: 00:00.0 Host bridge: Intel Corporation Ivy Bridge DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Ivy Bridge PCI Express Root Port (rev 09) 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) 00:14.0 USB controller: Intel Corporation Panther Point USB xHCI Host Controller (rev 04) 00:16.0 Communication controller: Intel Corporation Panther Point MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation Panther Point High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 1 (rev c4) 00:1c.4 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 5 (rev c4) 00:1d.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation Panther Point LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation Panther Point 6 port SATA Controller [AHCI mode] (rev 04) 00:1f.3 SMBus: Intel Corporation Panther Point SMBus Controller (rev 04) 01:00.0 VGA compatible controller: NVIDIA Corporation Device 0de9 (rev a1) 02:00.0 Network controller: Broadcom Corporation Device 4365 (rev 01) 03:00.0 Ethernet controller: Atheros Communications Inc. AR8161 Gigabit Ethernet (rev 10) iwconfig: lo no wireless extensions. eth0 no wireless extensions. ifconfig: eth0 Link encap:Ethernet HWaddr 84:8f:69:d4:35:9b inet addr:10.24.22.72 Bcast:10.24.31.255 Mask:255.255.224.0 inet6 addr: fe80::868f:69ff:fed4:359b/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:15332 errors:0 dropped:0 overruns:0 frame:0 TX packets:10425 errors:0 dropped:0 overruns:0 carrier:1 collisions:0 txqueuelen:1000 RX bytes:9262594 (9.2 MB) TX bytes:1572030 (1.5 MB) Interrupt:16 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:1432 errors:0 dropped:0 overruns:0 frame:0 TX packets:1432 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:145656 (145.6 KB) TX bytes:145656 (145.6 KB)

  Read the article

• my application did not show toast mesage when network is not available [closed]

  - by Smart Guy

  my application did no show toast message when network is disable if (position == 2) { final ConnectivityManager connMgr = (ConnectivityManager) getSystemService(Context.CONNECTIVITY_SERVICE); NetworkInfo activeNetworkInfo = connMgr .getActiveNetworkInfo(); android.net.NetworkInfo mobile1 = connMgr.getNetworkInfo(ConnectivityManager.TYPE_MOBILE); if (activeNetworkInfo == null) { Toast.makeText(LoginScreen.this, "No Active Network",Toast.LENGTH_LONG).show(); } else { if (activeNetworkInfo.isConnected()) { btnLogin.setOnClickListener(new OnClickListener() { public void onClick(View view) { String pinemptycheck = pin.getText().toString(); String mobileemptycheck = mobile.getText().toString(); if (pinemptycheck.trim().equals("")||(mobileemptycheck.trim().equals(""))) { Toast.makeText(getApplicationContext(), "Please Enter Correct Information", Toast.LENGTH_LONG).show(); } else { showProgress(); postLoginData(); } } }); } else if (activeNetworkInfo.isConnectedOrConnecting()) { Toast.makeText(LoginScreen.this, "network is Connecting", Toast.LENGTH_LONG) .show(); else if (mobile1.isAvailable()) { btnLogin.setOnClickListener(new OnClickListener() { public void onClick(View view) { showProgress(); postLoginData(); } }); } else if (!mobile1.isAvailable()) { Toast.makeText(LoginScreen.this,"No other Connection Found ",Toast.LENGTH_LONG).show(); btnLogin.setOnClickListener(new OnClickListener() { public void onClick(View v) { Toast.makeText(LoginScreen.this," No other Connection Found", Toast.LENGTH_LONG).show(); } }); }}}

  Read the article

• Network: Incoming connections work, outgoing fails

  - by anirvan

  i recently set up my own server at home to run Ubuntu 12.04 server ed. on booting up, i noticed that a message related to networking comes up, and the booting process pauses. the message read something like - waiting for network configuration and after a while - waiting another 60 seconds... on booting up, I realised that any command which requires a network connection was not working - ping, apt-get install, etc. on firing the ifup eth0 command, I get the error RTNETLINK answers: File exists. Failed to bring up eth0. I also realised, while searching the web for this problem, that this is probably one of the most common networking related issues - however, most of the questions are around setting up multiple IPs for the same machine. ifdown eth0 also fails, stating that eth0 is not configured. my /etc/network/interfaces file has a simple configuration for a static IP: auto lo iface lo inet loopback auto eth0 iface eth0 inet static address xx.xx.xx.xx netmask xx.xx.xx.xx broadcast xx.xx.xx.xx gateway xx.xx.xx.xx dns-nameservers xx.xx.xx.xx The strangest part of this problem is that, while I can't connect to anything outside, I can ping to this particular server using the static IP configured in the interface file, and, i can even SSH into it! I'm really at ends here with this problem, and any guidance is much appreciated. Thanks!

  Read the article

• set tap0 using virt-manager for bridged wireless

  - by DaveO

  After 3 days I finally have kvm guests working on the network via wireless (link below - thanks!): My network is 192.168.1.0/24 on the host: sudo sh -c "echo 1 > /proc/sys/net/ipv4/ip_forward" sudo tunctl -t tap0 sudo ip link set tap0 up sudo ip addr add 192.168.1.25/24 dev tap0 sudo route add -host 192.168.1.30 dev tap0 sudo parprouted wlan0 tap0 on the guest: auto eth0 iface eth0 inet static address 192.168.1.30 netmask 255.255.255.0 network 192.168.1.0 broadcast 192.168.1.255 gateway 192.168.1.25 and start the guest: sudo kvm /path/to/guest.img -net nic,macaddr=DE:AD:BE:EF:90:26 -net tap,ifname=tap0,script=no This works great and I can ping the local network and the internet back and forth between the guest. But how do I add these settings to the guest's xml config so I can start the guest via virt-manager with the same nic settings? ref: http://www.linuxquestions.org/questions/debian-26/kvm-wireless-bridge-network-691953/

  Read the article

• How to mount private network shares on login?

  - by bainorama

  I've read all the existing entries I could find on using pam_mount but none of them seem to work for me. I'm trying to automatically mount shares on my local NAS at user login time. The usernames and passwords on my NAS shares match my local user name and password, but there is no LDAP/AD server. My pam_mount.conf has the following: <volume fstype="cifs" server="bain-brain" path="movies" user="*" sgrp="bains" mountpoint="/home/%(USER)/movies" options="user=%(USER),dir_mode=0700,file_mode=700,nosuid,nodev" /> When I login, I see the following in /var/log/auth.log: Oct 13 10:21:26 bad-lattitude lightdm: pam_mount(misc.c:380): 29 20 0:20 / /home/alastairb/movies rw,nosuid,nodev,relatime - cifs //bain-brain/movies rw,sec=ntlm,unc=\\bain-brain\movies,username=alastairb,uid=1000,forceuid,gid=1000,forcegid,addr=10.1.1.12,file_mode=01274,dir_mode=0700,nounix,serverino,rsize=61440,wsize=65536,actimeo=1 The folder /home/alastairb/movies is present but empty (can't see the files which are on the NAS in the respective share folder). In Nautilus, the share is shown in the sidebar under "Computer", and clicking on this takes me to the correct folder, but again, its empty. Any ideas as to what I'm doing wrong?

  Read the article

• How do I connect to a wireless network?

  - by Keith Groben

  I just installed 10.10 x64 and cannot even find my wireless network let alone connect to it. I've searched all over SE and Ubuntu forums and cannot find out how to do this simple thing. Can some one please give me the answer? It is plugged in right now and is 100% updated. It is a Desktop with wireless card. 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no Here's the output: *-network DISABLED description: Wireless interface product: RT2860 vendor: RaLink physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 00 serial: 70:1a:04:f4:de:e9 width: 32 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=rt2800pci driverversion=2.6.35-27-generic firmware=N/A latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn resources: irq:17 memory:fcff0000-fcffffff *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: 03 serial: 00:23:54:fd:c2:32 size: 100MB/s capacity: 1GB/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full ip=192.168.1.14 latency=0 link=yes multicast=yes port=MII speed=100MB/s resources: irq:44 ioport:d800(size=256) memory:fceff000-fcefffff memory:ddffc000-ddffffff memory:fcec0000-fcedffff === Update === I have discovered that this is a know issue with the rt2860. I have been following step by step the instructions found here: http://www.ctbarker.info/2010/05/ubuntu-1004-wireless-chipsets-and-wpa.html I decided to stat over because I was getting stuck on step 5: 'sudo rmmod rt2860sta' is was giving me this problem: 'ERROR: Module rt2860sta does not exist in /proc/modules' Since I started over I cannot even get past step 5 'sudo make' I get this: 'make: * No targets specified and no makefile found. Stop.' I am lost. Any help would be appreciated.

  Read the article

• Why is my disk full?

  - by Agmenor

  I installed Ubuntu 12.04 by doing a fresh install where there was previously Ubuntu 11.10. My computer warns me now that my disk is nearly full. After having run apt-get purge, run apt-get autoremove and emptied the Trash can, I still have this problem as shown by this screenshot of Gparted: The disk /dev/sda7 is indeed full. I ran the Disk Usage Analyzer (Baobab) and I am still not sure of what is happening: One of my hypothesis is that when installing Ubuntu 12.04, I didn't configure my disks well and the disk /dev/sda6 is not mounted well as /home. Is this the reason indeed? What should I do to verify this and then to get the things fixed? Here are a few additional details to answer the questions I received (thank you everybody): My home directory is not encrypted. The Backup utility (Déjà Dup) is not set for automatic backups. (I do it myself and manually.) After I mount /dev/sda6, the command df -h gives Filesystem Size Used Avail Use% Mounted on /dev/sda7 244G 221G 12G 96% / udev 3,9G 4,0K 3,9G 1% /dev tmpfs 1,6G 904K 1,6G 1% /run none 5,0M 0 5,0M 0% /run/lock none 3,9G 164K 3,9G 1% /run/shm /dev/sda6 653G 189G 433G 31% /media/8ec2fa69-039b-4c52-ab1b-034d785132a1 (sorry but formatting this into code does not work, for an unknown reason) Thanks to izx's post, I realized /dev/sda6 was not even mounted before. It contains all the documents I used to have when I was running Ubuntu 11.10.

  Read the article

• Lost connectivity after configuring multiple network adapters on separate networks

  - by Dave Long

  I am trying to setup an Ubuntu hosting server, currently just for development, and the server has two NICs, each sitting on a different network. eth0 is on 192.168.200.* and eth1 is on 192.168.101.* and each one has a static IP. eth0 is the public facing NIC card and eth1 is strictly for internal access to the server. I initially only setup eth0 and added the eth1 card when I needed it. eth0 was working find until I added eth1, now, can't get any connectivity on eth0 unless I pull eth1 out of the box. The configuration on each system is as follows: auto eth0 iface eth0 inet static address 192.168.200.94 netmask 255.255.255.0 network 192.168.200.0 broadcast 192.168.200.255 gateway 192.168.200.253 auto eth1 iface eth1 inet static address 192.168.101.64 netmask 255.255.255.0 network 192.168.101.0 broadcast 192.168.101.255 gateway 192.168.101.254 Again eth0 worked fine until I added eth1. I have seen this happen with Windows servers if you have a Default Gateway setup for both NICs, but I am not sure if this works the same on Ubuntu. My resolv.conf file looks like so: nameserver 192.168.101.59 nameserver 192.168.101.58 domain domain.local search domain.local Per request here is the Routing table 192.168.101.0 * 255.255.255.0 U 0 0 0 eth1 192.168.200.0 * 255.255.255.0 U 0 0 0 eth0 default 192.168.101.254 0.0.0.0 UG 100 0 0 eth1 default 192.168.200.253 0.0.0.0 UG 100 0 0 eth0

  Read the article

• Network(ing) to the Limit

  - by Oracle OpenWorld Blog Team

   By Karen Shamban While Oracle OpenWorld attendees are networking, there's an Oracle Global IT team that builds and maintains the massive networks that help run the show. The objective? To keep things running as seamlessly and smoothly as possible, constantly evaluate priorities, mitigate risk, and be ready for whatever might happen -- because things do happen when there are 50,000 plus attendees, tens of thousands of devices, unexpected requirements, and a constant flow of up-to-the-minute information. Here's just some of what it takes to keep the conference going, network style: 100 Oracle network, voice, and desktop engineers; security, risk management, and other IT experts, who come in from 17 countries  1000+ network switches 300+ miles of copper and fiber 485 wireless access points 2,500 wired laptops 300 VoIP phones And just where are all these networks and devices deployed? This is what the team had to build and manage: Moscone North, South, and West, including: The keynote hall Oracle DEMOgrounds in the Exhibition Halls Hundreds of session rooms Connection Centers, Social Avenue, Lounges Registration The Howard Street Tent and Taylor Street Cafe tented venues Oracle Square (Union Square) Yerba Buena Gardens Masonic Auditorium Sessions and demos at 8 hotel venues That's a whole lot of networking going on. And here's the kicker: the team has only 4 days to bring get it all up and running across these many venues, and exactly 12 hours to take it all down once the show ends. The Global IT team puts in the equivalent of 152 24-hour days for set-up, 227 24-hour days of support during the conferences, and then tears it all down in about 20 24-hour days. And in case you were wondering, the planning for next year's Oracle OpenWorld starts ... next week. No rest for the weary.  Now THAT's networking!  So hats off to the Global IT team -- the job ain't easy, but somebody's got to do it, and they do it remarkably well.

  Read the article

• Network/browser issues after upgrade to 12.04

  - by Reg

  I let my laptop upgrade to 12.04. And have no network afterwards. I went through all the articles I could find in google. Right now, I can ping google, and yahoo, but not cnn.com for example or anything else. Firefox says it can't reach google.com or gmail.com (or anything, not even IP. /etc/network/interfaces dns-nameservers 8.8.8.8 <<<<<added auto lo iface lo inet loopback /etc/dhcp/dhclient.conf #prepend domain-name-servers 8.8.8.8,8.8.4.4; prepend domain-name-servers 127.0.0.1; <<<<< tried both /etc/NetworkManager/NetworkManager.conf with and without dns=dnsmasq commented out. I can ping my wireless router and connect to it just fine. Have tried proxy/noproxy. This looks like After Upgrade to 12.04 - cannot connect to network but no answer there. I would hate to do a fresh install. Any assistance appreciated.

  Read the article

• Unix [Homework]: Get a list of /home/user/ directories in /etc/passwd

  - by KChaloux

  I'm very new to Unix, and currently taking a class learning the basics of the system and its commands. I'm looking for a single command line to list off all of the user home directories in alphabetical order from the /etc/passwd directory. This applies only to the home directories, and not the contents within them. There should be no duplicate entries. I've tried many permutations of commands such as the following: sort -d | find /etc/passwd /home/* -type -d | uniq | less I've tried using -path, -name, removing -type, using -prune, and changing the search pattern to things like /home/*/$, but haven't gotten good results once. At best I can get a list of my own directory (complete with every directory inside it, which is bad), and the directories of the other students on the server (without the contained directories, which is good). I just can't get it to display the /home/user directories and nothing else for my own account. Many thanks in advance.

  Read the article

< Previous Page | 62 63 64 65 66 67 68 69 70 71 72 73  | Next Page >