Search Results

Search found 5885 results on 236 pages for 'monitor'.

Page 66/236 | < Previous Page | 62 63 64 65 66 67 68 69 70 71 72 73  | Next Page >

  • Windows 7 boot problem (with colorful blinking smilies)

    - by Ishmael Smyrnow
    I put my computer (Windows 7) to sleep, and a couple hours later, tried to wake it back up, but the monitor wouldn't come back on. I did a hard reset (held power button), but I still couldn't get the monitor to show anything. I plugged it into my laptop, and the monitor works fine. I then swapped out the video card with an older one I have. The monitor came on and started showing the boot process. However, shortly after the Windows 7 animated logo came up, the screen went blank, it made this weird beeping noise, and I seen the strangest thing ever. Small, colorful blocks started to fill my screen, and flash, as if something was loading. Inside of those blocks, were smilies (like the ASCII character kind). This continued for about a minute, then the computer rebooted. It scared the sh!t out of me. I've never had a virus before, and I'm savvy enough to keep myself from one, but I'm wondering if that's what it was. I've been using computers for ages, and never seen anything quite like this. Has anyone ever seen something like this? I'm doing hardware diagnostics before trying to boot into Windows again. Hopefully I can figure this out, but I thought I would consult the SU community while I wait on these results. -- UPDATE -- I did a Memory Diagnostic, which turned up nothing. I also booted into Safe Mode no problem, and scheduled a disk check on both of my drives (I dual boot XP & 7). I was feeling good, and tried putting my regular video card back in, and the monitor won't display anything with it. Also, even though the monitor displays nothing, the system sounds like it's booting up. However, I hear a clicking in one of my hard drives that isn't there with the older video card. Could this be a problem with my hard drive, video card, or PSU? PSU makes sense, except for the fact I've been using the same setup for over a year, and the video card doesn't require it's own power plug thing.

    Read the article

  • DVI vs VGA on Windows 7

    - by Joe Philllips
    I have a 3 monitor setup (each monitor is exactly the same). Two videocards, each with one splitter (one DVI and one VGA). I have two monitors hooked up using DVI and the third is connected through the VGA connection. I am running Windows 7. If I resize a window from one DVI monitor to the other, it's not a problem. It does so very smoothly. If I resize a window on the VGA monitor it is extremely choppy. Why? It's not choppy on other machines with only VGA connections. Has anyone else noticed this?

    Read the article

  • Can I get my video card to output a DVI and VGA signal at the same time?

    - by Roy Pardee
    Hey All, I've got: a lovely 24" monitor, w/both DVI and VGA inputs, a personal desktop w/a Radeon HD Pro 2400 video card (both DVI and VGA outputs) a work laptop w/both outputs, and a KVM switch that handles VGA only Right now I've got laptop connected to the monitor's VGA, and the desktop connected to the DVI. This works, but requires me to switch the KVM and monitor input sources separately, which annoys me (I switch back & forth a lot to make skype calls & manage my music). I'd like to feed both VGA and DVI signals out of my desktop so I can do quick things on my desktop & switch right back, but then when I'm done working, switch the monitor over to DVI to get the crisper picture. Alas, just attaching both VGA and DVI cables to my desktop's video card did not do the trick. Can this card be persuaded to output both signals at the same time? Many thanks! -Roy

    Read the article

  • Windows Color Calibrator Does Not Retain Color Settings

    - by Zian Choy
    When I try to calibrate the monitor using Windows 7's color calibrator, the monitor rejects changes to the color settings. For example, one of my monitors has a blueish tinge. If I click my mouse to tone down the blue and then let go of my mouse the monitor will go back to being blueish. At the moment, I am getting around the problem by using the color controls in the monitor's on screen displays. How can I get the color calibrator to work? Update: I tried checking the color settings in the ATI Radeon Catalyst Control Center and noticed that I can't do anything. The "Reactivate ATI color controls" button keeps flashing and any changes I try to make are discarded instantly.

    Read the article

  • How do I enable greedy MigrationHeuristic in Karmic?

    - by Matthew
    My laptop performs very poorly for 2d graphics. For example, Docky's zoom effect and compiz effects are very choppy. In Jaunty, I was able to fix this by adding the following line under the "Device" section in my xorg.conf: Option "MigrationHeuristic" "greedy" In Karmic, there is no xorg.conf by default, so I copied my old one (from Jaunty). However, everything is still slow. Here is my xorg.conf: Section "Device" Identifier "Configured Video Device" Option "MigrationHeuristic" "greedy" EndSection Section "Monitor" Identifier "Configured Monitor" EndSection Section "Screen" Identifier "Default Screen" Monitor "Configured Monitor" Device "Configured Video Device" EndSection From googling about, it sounds like "MigrationHeuristic" is only an option for the "EXA" mode, while Karmic has switched the intel driver to "UXA". So I tried adding this line under the "Device" section: Option "AccelMethod" "exa" But this didn't help.

    Read the article

  • Broken fonts in Konsole KDE 4.3.4

    - by depesz
    I have a strange situation - after some upgrades a couple of days ago fonts in KDE Konsole broke. To make it more specific - standard fonts look more or less OK, but when I use my national characters (like acelnsózz) they all look broken - like from another font, or badly scaled. The same problem doesn't exist in GNOME Terminal. I usually use the Terminus font, so I used this for demonstration, but it shows in other fonts as well - if that will be necessary I will provide list. Konsole shot: GNOME Terminal shot: As for my settings: =$ cat /etc/X11/xorg.conf Section "Device" Identifier "Builtin Default intel Device 0" Driver "intel" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Screen" Identifier "Builtin Default intel Screen 0" Device "Builtin Default intel Device 0" Monitor "Monitor0" EndSection Section "InputDevice" Identifier "touchpad" Driver "synaptics" Option "CorePointer" EndSection Section "ServerLayout" Identifier "Builtin Default Layout" Screen "Builtin Default intel Screen 0" InputDevice "touchpad" EndSection =$ xdpyinfo | grep -E resolution\|dimensions dimensions: 1680x1050 pixels (444x277 millimeters) resolution: 96x96 dots per inch I tried forcing DPI in system settings (to 120), or adding monitor size to xorg.conf - so far nothing helped. Any idea on what should I do to make it work sanely again?

    Read the article

  • Broken fonts in konsole kde 4.3.4

    - by depesz
    I have strange situation - after some upgrade couple of days ago fonts in KDE konsole broke. To make it more specific - standard fonts look more or less ok, but when I use my national characters (like acelnsózz) they all look broken - like from another font, or badly scaled. The same problem doesn't exist in gnome-terminal. I usually use Terminus font, so I used this for demonstration, but it shows in other fonts as well - if that will be necessary I will provide list. Konsole shot: gnome-terminal shot: As for my settings: =$ cat /etc/X11/xorg.conf Section "Device" Identifier "Builtin Default intel Device 0" Driver "intel" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Screen" Identifier "Builtin Default intel Screen 0" Device "Builtin Default intel Device 0" Monitor "Monitor0" EndSection Section "InputDevice" Identifier "touchpad" Driver "synaptics" Option "CorePointer" EndSection Section "ServerLayout" Identifier "Builtin Default Layout" Screen "Builtin Default intel Screen 0" InputDevice "touchpad" EndSection =$ xdpyinfo | grep -E resolution\|dimensions dimensions: 1680x1050 pixels (444x277 millimeters) resolution: 96x96 dots per inch I tried forcing DPI in system settings (to 120), or adding monitor size to xorg.conf - so far nothing helped. Any idea on what should I do to make it work sanely again?

    Read the article

  • Stick floating eclipse windows on second screen with Mac OS 10.9 Mavericks

    - by James
    When working with eclipse, I'm used to have a floating window with the console and other views on my secondary monitor. Since the update to OSX 10.9 (Mavericks), I still can drag the floating window to the secondary screen, but it keeps popping back to the main monitor when e.g. changing the perspective - which is really annoying. This did not happen with Mac OS 10.8. Is there a way that the floating windows of eclipse stay on the secondary monitor?

    Read the article

  • NEC MultiSync Resolution Problem

    - by PhilPursglove
    I have a slightly odd issue with my monitor, an NEC MultiSync LCD1970NXp. I'm running Windows 7 Ultimate on a Toshiba Tecra M5 laptop, and according to Windows Update I have the latest drivers. When I restart the laptop on the docking station at work with the monitor attached, it runs under 1024x800, but the optimum resolution for the monitor is 1280x1024, which isn't an available resolution in the Windows Screen Resolution dialog. If I restart the laptop undocked e.g. at home, it goes to 1280x1024, which is the resolution of the laptop screen. If I subsequently hibernate it and then wake it up on the docking station, the monitor then quite happily displays at 1280x1024. Can anyone suggest what the problem might be, or a method by which I can restart on the docking station and still get 1280x1024.

    Read the article

  • Intel motherboard drops HDMI output after Windows boots

    - by Nick
    I have an Intel motherboard (DH67CL) that uses Intel HD 3000 video. It has two video output ports: HDMI and DVI. Both my monitors are DVI, so I have two cables: a DVI-DVI and an HDMI-DVI. If I plug a monitor into just one of these ports, things work fine. But if I plug monitors into each of the ports, the system startup screens show on both monitors, along with the "Starting Windows..." screen, but as soon as the system boots into Windows, the HDMI-connected monitor goes to sleep. When I use the Intel video control panel, the HDMI-connected monitor is not detected. How do I get a dual-monitor setup to work?

    Read the article

  • Windows 8: Different Themes or Different Wallpaper Slideshows for Multiple Monitors

    - by Robith Nuriel Haq
    I know I can assign different wallpaper for each monitor that is connected to my computer in Windows 8(by right clicking and selecting "set for monitor 1,2,etc"), but I don't know how to assign different wallpaper slideshow or different theme for each monitor. Can anyone tell me how to do that? It is quite interesting to see different wallpapers on different monitors, but seeing static wallpaper on each of those monitors is no fun. thanks

    Read the article

  • Laptop VGA Out Stopped Working

    - by Jack7890
    I regularly use an external monitor with my laptop. Today, when I booted up, the external monitor refused to work--it just keeps going into power save mode. I tried a different external monitor and had the same problem, so it must be a problem with the laptop itself. Things I've tried: Going into the Display Settings via the Control Panel (I'm running Vista) and attaching/unattaching/reattaching the external monitor. Turning the computer off, unplugging, plugging it back in, and rebooting Blowing into the VGA out to get rid of any dust Toggling through the Fn+F7 options I'm thinking maybe this is an issue with my video card? If necessary, I'm comfortable opening up my laptop and playing around with things, but I'm not sure what to look for. Does anyone have any suggestions?

    Read the article

  • Laptop VGA Output Stopped Working

    - by Jack7890
    I regularly use an external monitor with my laptop. Today, when I booted up, the external monitor refused to work--it just keeps going into power save mode. I tried a different external monitor and had the same problem, so it must be a problem with the laptop itself. Things I've tried: Going into the Display Settings via the Control Panel (I'm running Vista) and attaching/unattaching/reattaching the external monitor. Turning the computer off, unplugging, plugging it back in, and rebooting Blowing into the VGA out to get rid of any dust Toggling through the Fn+F7 options I'm thinking maybe this is an issue with my video card? If necessary, I'm comfortable opening up my laptop and playing around with things, but I'm not sure what to look for. Does anyone have any suggestions?

    Read the article

  • 3 Monitors 2 different graphic cards

    - by Michael
    I am looking to add a third monitor to my workstation. I currently have 2 monitors connected to a geforce gt 120. I am wanting to find the cheapest solution on adding another monitor, I have a old ati x300 laying around and wanting to know if I would be able to use that to power the other monitor and if it would conflict with my other graphic card (I am not a gamer). What I want to do is have the at x300 power 1 monitor via dvi and the gt 120 power 2 monitors via vga and dvi. Thanks edit: im running windows 7 64bit

    Read the article

  • Utility to put taskbar on multiple monitors with task grouping?

    - by davr
    Right now I use UltraMon to extend my taskbar across multiple monitors. So windows on the first monitor show up on the taskbar on the first monitor, and windows on the second monitor show up on the taskbar on the second monitor. However, UltraMon does not support "Task Grouping", a feature in Windows since XP. Basically if you have many windows open, it will group together windows from the same app in a single taskbar entry. So if I have 22 explorer windows open, I'll only see a single explorer entry, and if I click it, a menu of the 22 windows shows up. Ultramon doesn't support this, instead I see 22 taskbar entries. Are there any utilities (or built in to windows 7 ways?) that will extend the taskbar across multiple monitors, and support task grouping on the secondary monitors?

    Read the article

  • Boot sequence unlike reboot

    - by samgoody
    When I turn on the computer it acts very differently than when I reboot it. [WinXP Pro, Intel Core2 6600, 2.4GHZ, 2GB RAM, NVIDA GeForce] Boot: Monitor must be plugged into the motherboard or no image. Screen resolution 800x600. Changes to the resolution cause only the top half of the screen to be usable, and are lost when I shut down the computer. Desktop icons arranged in neat rows on left of desktop. Nothing of note in system tray In Device Manger - Display adapter: Intel(R) Q965/Q963 Express Chipset Family In Device Manger - Monitors, two monitors are listed Hibernate and standby work. Reboot: Monitor must be plugged into the graphics card or no image. Screen resolution - 1280x1024 Desktop icons arranged in the cute circle that I put them in. NVIDIA icon shows in system tray. In Device Manger - Display adapter: NVIDA GeForce 6200LE In Device Manger - Monitors, one monitor is listed Hibernate and standby do not work. When awakened after a hibernation it says: The system could not be restarted from its previous location because the restoration image is corrupt. Delete restoration data & proceed to system boot? Double reboot (inconsistent): Monitor must be plugged into the graphics card. Screen resolution - 1024x768 Odd icon shows in system tray whose tooltip says "Intel Graphics" For a while my morning ritual was to boot, wait, reboot using (alt+ctrl+del - ctrl+u - R), wait. Keeping the monitor plugged into the graphics card. But aside for the inefficiency of this method, I sometimes want to standby and can't. On the other hand, the computer is unusable when set to 800x600. Please help, anyone?

    Read the article

  • Need to hookup HP dv7-3085dx with Nvidia GeForce GT 230M to my Dell 30 inch LCD 3007WFP at max resol

    - by user14660
    I recently bought an HP laptop (dv7-3085dx) (http://reviews.cnet.com/laptops/hp-pavilion-dv7-3085dx/4505-3121_7-33776108.html) which is supposed to have a pretty good video card (NVIDIA GeForce GT 230M). The card is supposed to output a max resolution of 2560x1600 which is also the max resolution of my monitor (http://www.ubergizmo.com/15/archives/2006/02/dell_3007wfp_on_dell_2001fp_action_8_megapixel_desktop.html). Now I bought an HDMI to dual link dvi (http://www.amazon.com/gp/product/B002KKLYDK/ref=oss_product) cable...this is after Best Buy's 70 dollar hdmi to dvi (perhaps it was 'single' link?) didn't give me the best resolution. In windows 7, when I try to set the max resolution for my 30 in monitor, I only get 1280x800...which is absurd. The monitor is great, I love the laptop and the video card supposedly supports such resolutions. So I can't figure out why I'm not getting better resolution (by the way, when i "detect" my monitor in windows 7, it is shown correctly as DELL 3007WFP!).

    Read the article

  • Where is the xorg.conf file in Karmic Koala (Ubuntu 9.10) ?

    - by jfmessier
    I am trying to change this xorg.conf file that I used to modify under Ubuntu 9.04, so it can have the higher resolutions of my monitor. Under 9.04, the monitor was unknown, and I had to key in all resolutions in the file, and although it is found under 9.10, 9.10 does not have the highest resolution that My monitor can sustain. How can I change such setting ? Is xorg.conf moved, or replaced ? Merci :-) JF

    Read the article

  • What is causing sudden freezing during running real-time program?

    - by Trevor Boyd Smith
    So I run a high intensive (CPU/GPU) real-time program. During normal execution suddenly everything freezes for 1-4 seconds. I opened "Process Explorer" in the background to help gain insight and maybe identify something. Here is what the CPU/GPU graphs looks like when I align them in time: Notice the 4 distinct drops in both the CPU/GPU. You can see that it goes from some sort of positive CPU/GPU usage to almost zero. These drops in the graph align with when the real-time program suddenly freezes. How do I find what is causing these sudden drops? NOTE: When you put your mouse over the graph it tells you the time, accurate to the second, for where your cursor is. Maybe this mouse over feature could be helpful in some way (e.g. what if you had a log of all processes every 100ms). EDIT: The real-time program is a video game and so I can't watch some sort of instrumentation while the video game is running. I need a solution that let's you look back in time somehow to see what was happening when the slow down occurred. EDIT: RE - Recording Data vs using real-time monitor: So the windows performance recorder is for some reason not recording what I expect it to record. So I switched to using "perfmon" and then opening it's "resource monitor". RE - Setting it up so I can view real-time monitor: In the video game I set it to spectate and then put the video game in "windowed" mode so that I can view the real time display that Resource Monitor has. Now that I can get semi-real time (only once per second... how do you get more than once per second?) I started looking at the various real time data readouts. Getting to the cause: I noticed a strong correlation in high disk IO and low CPU usage (which is also seen by having in-game freezing). How do you use resource monitor to find out who is doing all this offending disk IO?

    Read the article

  • Dell docking station / Windows 7 not detecting HannsG JC199D via DVI

    - by user27150
    I have a laptop running Win7 that I use with a Dell docking station. I'd used it with XP for a couple years running dual monitors from the docking station, one from the VGA and one from the DVI. After upgrading to Win7, the monitor that's on the DVI out is not detected, using "rigorous detection" or otherwise. I've switched the cables to verify that it's not the monitor at fault-- but I can't find any info on why the monitor wouldn't be detected. I've got the latest and greatest Nvidia drivers installed (at least, as far as Windows update is aware). Leaving the laptop lid partly open does allow Windows to detect the laptop's native screen as well as the VGA monitor, but never the DVI. The monitors are HannsG JC199Ds. Any ideas? Thanks!

    Read the article

  • Virtual PC 2007 Full Screen Resolution

    - by Swami
    I have a laptop (1440 x 900) and an external monitor (1920 x 1200), and I'm running Virtual PC 2007. Initially, my VPC could not switch to fullscreen mode on my external monitor because the max resolution for VPC was only 1600 x 1200. I installed a hotfix (http://support.microsoft.com/kb/958162) and after the hotfix, I was able to view VPC in fullscreen mode on my external monitor, but now I'm unable to view fullscreen on my laptop. It says "please check that the resolution of the guest is not higher than that of the host". I even tried to decrease the resolution of my Virtual PC to less than than of my laptop, but it always resets it back up. So now after the hotfix, I can view fullscreen mode only when my external monitor is plugged in. Any way I can resolve this?

    Read the article

  • ftp server monitoring

    - by Supra Man
    I need to monitor some ftp servers for any changes in file structure, things that I need to monitor is how many times an file is downloaded (not sure if possible), if files are changed or not, if files are deleted or not, if ftp server still exists, i would like this to be something that i can run server=side and would like a sms message or email if any of the above changes have occured any one have any experience or would recommend an particular language or script? thanks just for reference, i don't want to install an ftp server, i just want something to help me monitor other remote ftp servers by periodically logging in

    Read the article

  • Multiple monitors on ATI Radeon HD 5450 1GB DDR2 (Brand: Sapphire)

    - by Robert
    From other posts here, I understand that it might be possible to use up to 3 monitors on this card. My understanding (from the other posts here as well) is that since I have a HDMI output, I do not have a 'DisplayPort', right ? Mine has indeed 3 ports: DVI, HDMI and VGA. Can I have dual-monitor using both the HDMI and DVI ports simulataneously (I am not looking for Eyefinity, but simply extended desktop). Currently I am using dual monitor with DVI and VGA but will replace my 17 inches next week with a new (larger) one that has both VGA and DVI, so I intend to use both monitors connected digitally. I intend to purchase a cable ''HDMI to DVI''(MM) to do so on the second monitor. Optimal resolution on the one I intend to keep (22 inches) : 1680 x 1050, primary monitor. New one (24 inches) has an optimal resolution of 1920 x 1080. Am I running for problems ? Thanks, Rob

    Read the article

< Previous Page | 62 63 64 65 66 67 68 69 70 71 72 73  | Next Page >