Search Results

Search found 3249 results on 130 pages for 'packet loss'.

Page 66/130 | < Previous Page | 62 63 64 65 66 67 68 69 70 71 72 73  | Next Page >

• VMware vSphere 4.1: host performance graphs show "No data available", except the realtime view, which works fine

  - by Graeme Donaldson

  Here's our scenario: Site 1 has 3 hosts, and our vCenter server is here. Site 2 has 3 hosts. All hosts are ESXi 4.1 update 1. If I view the Performance tab for any host in Site 1, I can view realtime, 1 Day, etc., i.e. all the views give me graph data. For the hosts in Site 2, I can view the realtime graphs, 1 Day and 1 Week both say "No data available". 1 Month had mostly nothing, 1 Year shows that it was working fine for a long time and then started breaking. 1 Month view: 1 Year view: What would cause this loss of performance data?

  Read the article

• Any way to know what files were in a broken ZFS pool?

  - by Erik Tjernlund

  I have a large ZFS pool of 4 combined drives. Now, the filesystem can not be mounted: pool: tank state: UNAVAIL status: One or more devices could not be opened. There are insufficient replicas for the pool to continue functioning. action: Attach the missing device and online it using 'zpool online'. see: http://www.sun.com/msg/ZFS-8000-3C scan: none requested config: NAME STATE READ WRITE CKSUM tank UNAVAIL 0 0 0 insufficient replicas c10t0d0 ONLINE 0 0 0 c8t0d0 UNAVAIL 0 0 0 cannot open c8t1d0 ONLINE 0 0 0 c10t1d0 ONLINE 0 0 0 Probably a broken drive (c8t0d0). I'm not overly concerned by the loss of the data, but I'd love to know exactly which files were in that pool. Is there any way to get a listing of what files were there?

  Read the article

• How to recover data from software RAID 5 disk partition

  - by Ali n

  I have CentOS 5.8 on my computer, with 5x 1TB hard drives. I used software RAID. (RAID 1 as a boot partition md0, RAID 0 as a root partition md1 and RAID 5 as /home partition md3). Unfortunately one of these hard drives failed lately and I want to replace it with a new one. I want to know that is it possible to change this hard drive without data loss? The important partition is RAID 5 so in theory if one of hard drives failed I should be able to recover its data without any problem. But in practice how can I do that?

  Read the article

• What is the best way to create RAID 1?

  - by user3125731

  I'm looking for a way to create the RAID 1 array without losing my data on CentOS. Here's my situation: I've got a web server running on CentOS. There is one VG partition with few LV volumes. I bought a second HDD (the same model and size as the first one) and I want to create the RAID 1 configuration. I can't just shut down this server for more than an hour because my clients will be disappointed. I need to do this as quickly as possible with minimal risk of data loss.

  Read the article

• SharePoint 2010 User Profile Sync - Remove Disabled Users

  - by ScaleOvenStove

  I have SharePoint 2010 set up to sync active directory users and it is working great. I am getting disabled users in the sync though. I have tried what all the blogs say, filter on userAccountControl bit on equals 2 but to no avail, the disabled users are still syncing. I am at a loss on where to look next. My last resort would be to create a ou/folder in AD and move disabled users there and remove that from the sync connector, but I don't really want to go there. Any ideas?

  Read the article

• Windows server 2008 UPS support

  - by Rory McCune

  I'm looking to set-up a UPS on a Windows Small Business Berver 2k8 and I've noticed that there are some large price differences for similar capacity in-line UPSs. The most important point for me in UPS selection is that the server should have the ability to shut itself down before the UPS power runs out, so that if the server is unattended during the outage, it should minimize the risk of data loss. From some reading it appears that Windows Server 2008 should has the ability to natively recognise a UPS, which can then be managed through the battery settings on the server or via WMI. What I'm wondering if anyone know is, Is Windows 2008 servers UPS support specific to certain brands of UPS (eg, APC) or is it likely to work with any UPS which has a USB port, which I can connect to the server?

  Read the article

• negative time for a ping echo reply

  - by Mario

  I was happily pinging in the net when suddenly: Pinging X with 32 bytes of data: Reply from .235: bytes=32 time=1444ms TTL=41 Reply from .235: bytes=32 time=1767ms TTL=41 Reply from .235: bytes=32 time=1531ms TTL=41 Reply from .235: bytes=32 time=-1198187ms TTL=41 Ping statistics for .235: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 1444ms, Maximum = -1198187ms, Average = 1073443462ms A negative time for the reply. I checked wireshark and it had the same values: Time delta from previous displayed frame: -1198.187867000 seconds Time since reference or first frame: -1179.935038000 seconds I didn't change the time of the machine while pinging. This was made in my local network at home, from a XP VM in windows 7. So I blame the VM (virtualbox). But I was wondering if this strange behaviour (to me) could have a reason, or if any of you have seen this before. Thank you bye.

  Read the article

• Maximum MTU size

  - by user192702

  Thought one of the issues I'm experiencing with the following question is due to MTU rightfully so. ESXi 5 VM Putty session hangs, vSphere client timing out However, when I tried testing the maximum MTU size it seems there's just no limit. Thought Ethernet only allows maximum MTU. But I'm up to 54450. ping -l 54450 192.168.10.7 Pinging 192.168.50.7 with 54450 bytes of data: Reply from 192.168.10.7: bytes=54450 time=1081ms TTL=62 Reply from 192.168.10.7: bytes=54450 time=1079ms TTL=62 Reply from 192.168.10.7: bytes=54450 time=1079ms TTL=62 Reply from 192.168.10.7: bytes=54450 time=1079ms TTL=62 Ping statistics for 192.168.10.7: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 1079ms, Maximum = 1081ms, Average = 1079ms

  Read the article

• How would you diagnose an integrated network card that doesn't show up on the device list?

  - by Tomer Gabel

  I've been setting up a server based around a Gigabyte GA-G33M-DS2R motherboard (G33, PCH9R with integrated Realtek 811B network device. I've enabled it in the BIOS, but it doesn't show up in the pre-boot PCI device list, isn't recognized by Windows (even after installing the chipset and networking drivers) and doesn't even show up via lspci. I've tried cycling power, disabling, cycling again, enabling, cycling again etc. to no avail. I'm sort of at a loss at this point; the board isn't under warranty anymore, but I'd rather not have to replace it. Any advice would be greatly appreciated...

  Read the article

• Forward Hostname via my router to another PC for debugging

  - by Markive

  Hi, My web service runs on for example: http://mydomain.com/mywebservice.asmx. This works great, but I have a PDA application which I want to debug it synchronising through this web service. Currently the only way I can do this is to debug the webservice running on the actual server which is far from ideal. What I would like to do is for any device connecting on my wireless network, if it requests mywebservice.asmx for this to forward the request to my development PC and for IIS to then handle the request and allow me to debug in Visual Studio. So device on the network that requests the hostname: mywebservice.asmx will his this PC.. I am at a loss to set this up on my router (Zoom ADSL X6), this is massively out of my scope but any help would be much appreciated

  Read the article

• Cannot extend existing data disk over 2TB on windows 2008 with dynamic and gpt part

  - by DJYod

  As my D: disk is almost full (2TB) I extended the FC lun to 2.5TB. The new 500Go are seen by windows as "Unalloacted" as expected. I tried to extend the volume but windows says "The is not enough space available on the disk(s) to complete this operation" I read on the web that the disk should be configured as GPT and as a dynamic and it's already a dynamic gpt disk... How can I extend my disk without any data loss? My operating system is Windows 2008 R2 x64 SP1 and the SAN a 3PAR I hope someone can help me :) Thank you very much

  Read the article

• Ways to increase my Ubuntu partition space

  - by Andreas Grech

  I am currently running Ubuntu and Windows 7 as dual-boot on a single HD. The problem is that when I installed Ubuntu, I didn't allocate as much space as I thought I would need and now I need 'reinstall' Ubuntu so that I can increase the amount of storage space. Now there are two ways to go about this. Either I use use gparted to increase my partition space (but I read that it's not really that safe as regards data loss) or create the new partition with more space and reinstall Ubuntu there. But if want to reinstall Ubuntu, is there a way I can somehow "save" my current Ubuntu and install that one? What I mean is that I don't want to lose my current installed packages and files that I have on this partition. Is there a way to kind of maybe 'streamline' my current Ubuntu so that I install this one on the new partition? If not, what are your opinions as regards gparted?

  Read the article

• PC boots on then off & 30 sec. later on again, it wiil shut off on itself mostly in idle or just unexpecticly

  - by Jody

  This problem started w/ my sons desktop, it would just shut off after a bit of work or stay on for a long time & to get it to unfreeze is to cold boot it, i put a new HDD in & I still have the same issue, RAM is good power supply fan is moving quite as well as all the rest of the fans it has stayed fairly dust free, i'm at a loss ,I have defaulted all the factory settings changed battery & ungraded to a new OS. I still have the same problem. the power light stays on after it has shut down & when upon starting it goes straight to safe mode option page, I start in last good config. reboots again takes 30 sec. to boot & will work again for a while, the only other thing I haven't tried was a graphic card replace, i'm onboard video now & have been.

  Read the article

• Ping from windows 7 get no reply but sets errorlevel to 0

  - by Doron

  From a Windows 7 machine, I ping an IP address of a turned-off machine. C:\>ping 192.168.1.222 Pinging 192.168.1.222 with 32 bytes of data: Reply from 192.168.1.222: Destination host unreachable. Reply from 192.168.1.222: Destination host unreachable. Reply from 192.168.1.222: Destination host unreachable. Ping statistics for 192.168.1.222: Packets: Sent = 3, Received = 3, Lost = 0 (0% loss) Even though there is no reply, the errorlevel is set to 0. What I am trying to do, is figure out if a remote machine is replying to ping. One of my tests is to turn off the machine and ping it. For some reason, ping sets errorlevel to 0.

  Read the article

• Collect and Backup Photos from Multiple Photographers

  - by Graviton

  I have a few photographers working under me ( well, not exactly under me, but I say it anyway just for illustration purpose), so they shoot a lot of photos, the problem is that they all store their photos on their hard disk, and I have no way to retrieve them unless I pass them an USB and ask them to fill it with their photos. Very labor intensive and inefficient! Is there any other better ( more automated) ways of doing this? For the fear of losing the resolution, I don't really favor a online-synch approach, because I think all the photos uploaded to any website will suffer a resolution loss, which is the last thing I want. Is there a better idea? Edit: Being artistic as they are, I can't guarantee that they all use PC and Windows; so the software must at least be able to run on Mac.

  Read the article

• WGet or cURL: Mirror Site from http://site.com And No Internal Access

  - by alharaka

  I have tried wget -m wget -r and a whole bunch of variations. I am getting some of the images on http://site.com, one of the scripts, and none of the CSS, even with the fscking -p parameter. The only HTML page is index.html and there are several more referenced, so I am at a loss. curlmirror.pl on the cURL developers website does not seem to get the job done either. Is there something I am missing? I have tried different levels of recursion with only this URL, but I get the feeling I am missing something. Long story short, some school allows its students to submit web projects, but they want to know how they can collect everything for the instructor who will grade it, instead of him going to all the externally hsoted sites.

  Read the article

• Automatically change aspect ratio of WMC videos

  - by NeverwaY

  is there a way to automatically change the aspect ratio flag of a video so that it displays in 16:9 in all video players WITHOUT reencode? Quality loss is not a concern. I just need a quick and efficient way to convert several video files to 16:9 as quickly as possible. For instance, older tv show series. I use a plasma tv for my media center, and do not want black bars burnt into my screen when people that dont understand how to use the zoom function in WMC7 watch tv all day. thanks.

  Read the article

• LVM mirroring VS RAID1

  - by syrenity

  Hi. Having learned a bit about LVM mirroring, I thought about replacing the current RAID-1 scheme I'm using to gain some flexibility. Problem is that according to what I found on the Internet, LVM is: 1) Slower then RAID-1, at least in reading (as only single volume being used for reading). 2) Non-reliable on power interrupts, and requires disk cache disabling for prevention of data loss. http://www.joshbryan.com/blog/2008/01/02/lvm2-mirrors-vs-md-raid-1/ Also it seems, at least to several setup guides I read (http://www.tcpdump.com/kb/os/linux/lvm-mirroring/intro.html), that one actually requires a 3rd disk for storing the LVM log. This makes the setup completely unusable on 2 disks installations, and lowers the amount of used mirror disks on higher amount of disks. Can anyone comment the above facts, and let me know his experience of using LVM mirroring? Thanks.

  Read the article

• Lync Server 2010 with Hosted VoIP PBX

  - by kmehta

  We just deployed Lync Server 2010 in our organization and it is working great so far. The next step for us is to enable enterprise voice so that we can replace our telephones with service that is handled 100% by Lync. This is where I am at a loss. I have a fully deployed Standard Edition Lync server and a hosted VoIP PBX provider with VoIP handsets. I would like to get rid of the handsets and have my company's phone service be handled by Lync client (e.g. someone calls my work number, and Lync rings instead of my old handset that is set up with the PBX) I am new to deploying these types of features. Any help is appreciated. Thanks.

  Read the article

• HDFS datanode startup fails when disks are full

  - by mbac

  Our HDFS cluster is only 90% full but some datanodes have some disks that are 100% full. That means when we mass reboot the entire cluster some datanodes completely fail to start with a message like this: 2013-10-26 03:58:27,295 ERROR org.apache.hadoop.hdfs.server.datanode.DataNode: java.io.IOException: Mkdirs failed to create /mnt/local/sda1/hadoop/dfsdata/blocksBeingWritten Only three have to fail this way before we start experiencing real data loss. Currently we workaround it by decreasing the amount of space reserved for the root user but we'll eventually run out. We also run the re-balancer pretty much constantly, but some disks stay stuck at 100% anyway. Changing the dfs.datanode.failed.volumes.tolerated setting is not the solution as the volume has not failed. Any ideas?

  Read the article

• VMware Fusion / New Machine / verify VMs?

  - by drewk

  I just got a 15" MacBook Pro with 8GB RAM, 2.66 i7 and 500GB SSD. Very sweet and fast! My old machine was 2.66 Core 2 Duo. I used Migration Assistant to migrate my old MBP to the new. When I started VMware to run Windows and Ubuntu I got the message first This VM has been moved or copied to a new machine. Did you move or copy it? I answered Copied. Then I got the message this CPU is a different configuration than the machine that created the VM. You may get unpredictable results. I answered Open Anyway. Windows XP, Windows 7, and Ubuntu all seem to work OK, but how can I verify? Is there some form of test harness for a VM? I have had a VM degrade and become unusable with very catastrophic data loss (on Parallels...), so I am a bit paranoid. Thanks,

  Read the article

• Which software to use for RAMDISK on Windows 2008?

  - by Tony_Henrich

  I am building a server machine with lots of RAM. At least 16G. I am planning to put my frequently read and written data in RAM so I am looking for software for creating RAM disks. This is for Windows Server 2008 R2 Standard 64bit. Any recommendations? I would like one where I can flush the disk image into persistent storage upon demand. For example when Windows shuts down. (I am aware of all the consequences of data loss when power is lost)

  Read the article

• RAID--0 " TWO " DRIVES SSD ONLY Should I use on-board / Software RAID OR a RAID Card / Control

  - by Wes

  I am looking at going with a TWO Drive Only SSD RAID-0 Configuration And was wondering if I would get better performance / Speed from the Use of a RAID Controller / Card Verses just using the Software RAID on my Mother Board. I have herd conflicting reports , Again I only Plan on Running " 2 " SSD Drives in RAID-0 Config I have No- problem spending the extra money for a good controller but only if I am going to benifit performance wise , Otherwise if there is no notable Gain I will just use the Software RAID that my HP-180-T came with Intel- 3.33 GHZ , 6-Core , 12-GB of DDR-3. I have a huge External drive for All Storage and am not concerned about Data loss just looking for pure speed. And if a Controller will benifit my performance Wht type of card would one suggest?

  Read the article

• View Public Key in Domain Key for a Domain

  - by Josh

  Using Jeff's blog post I'm creating domain keys for my account. I wanted to verify the setup using Get or Host command with Bind for Windows but I'm lost one of the commands. I can see view the _domainkey. txt file with this command: host -t txt _domainkey.stackoverflow.com but I'm at a loss at how I'd find the selector record. Jeff points out it can be anything before the before the period in "._domainkey.domain.com" but how would I list all records if I didn't know the exact query name? Is there a wildcard I could use to view all TXT or all records under this section?

  Read the article

• Active Directory Profile Slows down machine

  - by boburob

  I have a strange issue with an Active Directory profile. When the user logs onto a machine with his profile, the whole machine becomes incredibly slow and unresponsive, with programs hanging and taking an age to load everything. If I log into the same machine with any other profile nothing happens. I took a look at his original profile, any start up programs, login scripts, etc and could not see what could be causing this. The machine is not running out of memory or CPU. Nothing strange is appearing in the event log and I can see nothing running under his profile which may cause this. So I created the user a new profile to test this on and exactly the same thing happens on the first login. The only thing which would of been carried across is the security groups the user is assigned to, yet I have other users with the same groups who do not experience these issues so I am now at a complete loss on where to go next!

  Read the article

< Previous Page | 62 63 64 65 66 67 68 69 70 71 72 73  | Next Page >