Search Results

Search found 1919 results on 77 pages for 'triple monitors'.

Page 66/77 | < Previous Page | 62 63 64 65 66 67 68 69 70 71 72 73  | Next Page >

  • How can fix HDMI HDTV overscan when I my TV has no aspect ratio setting?

    - by Colin Dean
    I have a 32" Vizio HDTV. It's a few years old, but running well. I just connected a new nettop to it using HDMI out. It's the Intel 3x00 graphics chipset. I'm seeing overscan, where the resolution in Ubuntu is set to 1280x720, but the TV itself is 1366x768. When I go into the Monitors control applet, I cannot change the resolution to anything other than the current or 640x480. A user had a similar overscan problem, but fixed the overscan by adjusting his TV's aspect ratio settings. I do not have that luxury. Is there a way I can do this without having to delve into xorg.conf or other command-line craziness? I'm more than comfortable doing so, but there must be a cleaner way. I'm running Ubuntu Natty, keeping up with updates and such. Here's the output of lspci: colin@bricktop:~$ lspci 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 12) 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 12) 00:04.0 Signal processing controller: Intel Corporation Core Processor Thermal Management Controller (rev 12) 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) 00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06) 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06) 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 06) 00:1c.2 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 3 (rev 06) 00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a6) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 06) 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 06) 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 06) 00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 06) 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06) 02:00.0 USB Controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 03) 03:00.0 Network controller: Atheros Communications Inc. AR9287 Wireless Network Adapter (PCI-Express) (rev 01)

    Read the article

  • Package system broken - E: Sub-process /usr/bin/dpkg returned an error code (1)

    - by delha
    After installing some packages and libraries I have an error on Package Manager, I can't run any update because it says: "The package system is broken If you are using third party repositories then disable them, since they are a common source of problems. Now run the following command in a terminal: apt-get install -f " I've tried to do what it says and it returns me: jara@jara-Aspire-5738:~$ sudo apt-get install -f Reading package lists... Done Building dependency tree Reading state information... Done Correcting dependencies... Done The following packages were automatically installed and are no longer required: libcaca-dev libopencv2.3-bin nite-dev python-bluez ps-engine libslang2-dev python-sphinx ros-electric-geometry-tutorials ros-electric-geometry-visualization python-matplotlib libzzip-dev ros-electric-orocos-kinematics-dynamics ros-electric-physics-ode libbluetooth-dev libaudiofile-dev libassimp2 libnetpbm10-dev ros-electric-laser-pipeline python-epydoc ros-electric-geometry-experimental libasound2-dev evtest python-matplotlib-data libyaml-dev ros-electric-bullet ros-electric-executive-smach ros-electric-documentation libgl2ps0 libncurses5-dev ros-electric-robot-model texlive-fonts-recommended python-lxml libwxgtk2.8-dev daemontools libxxf86vm-dev libqhull-dev libavahi-client-dev ros-electric-geometry libgl2ps-dev libcurl4-openssl-dev assimp-dev libusb-1.0-0-dev libopencv2.3 ros-electric-diagnostics-monitors libsdl1.2-dev libjs-underscore libsdl-image1.2 tipa libusb-dev libtinfo-dev python-tz python-sip libfltk1.1 libesd0 libfreeimage-dev ros-electric-visualization x11proto-xf86vidmode-dev python-docutils libvtk5.6 ros-electric-assimp x11proto-scrnsaver-dev libnetcdf-dev libidn11-dev libeigen3-dev joystick libhdf5-serial-1.8.4 ros-electric-joystick-drivers texlive-fonts-recommended-doc esound-common libesd0-dev tcl8.5-dev ros-electric-multimaster-experimental ros-electric-rx libaudio-dev ros-electric-ros-tutorials libwxbase2.8-dev ros-electric-visualization-common python-sip-dev ros-electric-visualization-tutorials libfltk1.1-dev libpulse-dev libnetpbm10 python-markupsafe openni-dev tk8.5-dev wx2.8-headers freeglut3-dev libavahi-common-dev python-roman python-jinja2 ros-electric-robot-model-visualization libxss-dev libqhull5 libaa1-dev ros-electric-eigen freeglut3 ros-electric-executive-smach-visualization ros-electric-common-tutorials ros-electric-robot-model-tutorials libnetcdf6 libjs-sphinxdoc python-pyparsing libaudiofile0 Use 'apt-get autoremove' to remove them. The following extra packages will be installed: libcv-dev The following NEW packages will be installed libcv-dev 0 upgraded, 1 newly installed, 0 to remove and 4 not upgraded. 2 not fully installed or removed. Need to get 0 B/3,114 kB of archives. After this operation, 11.1 MB of additional disk space will be used. Do you want to continue [Y/n]? y (Reading database ... 261801 files and directories currently installed.) Unpacking libcv-dev (from .../libcv-dev_2.1.0-7build1_amd64.deb) ... dpkg: error processing /var/cache/apt/archives/libcv-dev_2.1.0-7build1_amd64.deb (-- unpack): trying to overwrite '/usr/bin/opencv_haartraining', which is also in package libopencv2.3-bin 2.3.1+svn6514+branch23-12~oneiric dpkg-deb: error: subprocess paste was killed by signal (Broken pipe) Errors were encountered while processing: /var/cache/apt/archives/libcv-dev_2.1.0-7build1_amd64.deb E: Sub-process /usr/bin/dpkg returned an error code (1) I've tried everything people recommend on internet like: sudo apt-get clean sudo apt-get autoremove sudo apt-get update sudo apt-get upgrade sudo apt-get -f install Also I've tried to install the synaptic manager but it doesn't let me install anything.. As you can see nothing works so I'm desperate! I'm using ubuntu 11.10, 64 bits Thanks!!

    Read the article

  • Making the WPeFfort

    - by Laila
    Microsoft Visual Studio 2010 will be launched on April 12th. The basic layout looks pretty much as it did, so it is not immediately obvious on first inspection that it was completely rewritten in the Windows Presentation Foundation (WPF). The current VS 2008 codebase had reached the end of its life; It was getting slow to initialize and sluggish to run, and was never going to allow for multi-monitor support or easier extensibility. It can't have been an easy decision to rewrite Visual Studio, but the gamble seems to have paid off. Although certain bugs in the betas caused some anxiety about performance, these seem to have been fixed, and the new Visual Studio is definitely faster. In rewriting the codebase, it has been possible to make obvious improvements, such as being able to run different windows on different monitors, and you only being presented with the Toolbox controls and References that are appropriate to your target .NET version. There is also an IntelliTrace debugger, and Intellisense has been improved by virtue of separating a 'Suggestion Mode' and 'Completion Mode' (with its 'Generate From.' 'Highlight References.', and 'Navigate to...' features). At the same time, there has been quite a clearout; Certain features that had been tucked away in the previous versions, such as Brief or Emacs emulation support, have been dropped. (Yes, they were being used!) There are a lot of features that didn't require the rewrite, but are welcome. It is now easier to develop WPF applications (e.g. drag-and-drop Databinding), and there is support for Azure. There are more, and better templates and the design tools are greatly improved (e.g. Expression Web, Expression Blend, WPF Sketchflow, Silverlight designer, Document Map Margin and Inline Call Hierarchy). Sharepoint is better supported, and Office apps will benefit from C#'s support of optional and named arguments, and allowing several Office Solutions within a Deployment package. Most importantly, it is a vote of confidence in the WPF. VS 2010 is the essential missing component that has been impeding the faster adoption of WPF. The fact that it is actually now written in WPF should now reassure the doubters, and convince more developers to make the move from WinForms to WPF. In using WPF, the developers of Visual Studio have had the clout to fix some issues which have been bothering WPF developers for some time (such as blurred text). Do you see a brighter future as a result of transferring from WinForms to WPF? I'd love to know what you think. Cheers, Laila

    Read the article

  • Ubuntu won't display netbook's native resolution

    - by Daniel
    FYI: My Netbook model is HP Mini 210-1004sa, which comes with Intel Graphics Media Accelerator 3150, and has a display 10.1" Active Matrix Colour TFT 1024 x 600. I recently removed Windows 7 Starter from my netbook, and replaced it with Ubuntu 12.10. The problem is the OS doesn't seem to recognise the native display resolution of 1024x600 i.e. the bottom bits of Ubuntu is hidden beneath the screen & the only 2 available resolutions are: the default 1024x768 and 800x600. I've also thought about replacing Ubuntu with Lubuntu or Puppy Linux, as the system does run a bit slow, but I can't, as then I won't be able to access the taskbar and application menu which will be hidden beneath the screen. Only Ubuntu with Unity is currently usable, as the Unity Launcher is visible enough. I was able to define a custom resolution 1024x600 using the Q&A: How set my monitor resolution? but when I set that resolution, there appears a black band at the top of the screen and the desktop area is lowered, with bits of it hidden beneath the screen. I tried leaving it at this new resolution and restarting the system to see if the black band would disappear & the display will fit correctly, but it gets reset to 1024x768 at startup and displays following error: Could not apply the stored configuration for monitors none of the selected modes were compatible with the possible modes: Trying modes for CRTC 63 CRTC 63: trying mode 800x600@60Hz with output at 1024x600@60Hz (pass 0) CRTC 63: trying mode 800x600@56Hz with output at 1024x600@60Hz (pass 0) CRTC 63: trying mode 640x480@60Hz with output at 1024x600@60Hz (pass 0) CRTC 63: trying mode 1024x768@60Hz with output at 1024x600@60Hz (pass 1) CRTC 63: trying mode 800x600@60Hz with output at 1024x600@60Hz (pass 1) CRTC 63: trying mode 800x600@56Hz with output at 1024x600@60Hz (pass 1) CRTC 63: trying mode 640x480@60Hz with output at 1024x600@60Hz (pass 1) Trying modes for CRTC 64 CRTC 64: trying mode 1024x768@60Hz with output at 1024x600@60Hz (pass 0) CRTC 64: trying mode 800x600@60Hz with output at 1024x600@60Hz (pass 0) CRTC 64: trying mode 800x600@56Hz with output at 1024x600@60Hz (pass 0) CRTC 64: trying mode 640x480@60Hz with output at 1024x600@60Hz (pass 0) CRTC 64: trying mode 1024x768@60Hz with output at 1024x600@60Hz (pass 1) CRTC 64: trying mode 800x600@60Hz with output at 1024x600@60Hz (pass 1) CRTC 64: trying mode 800x600@56Hz with output at 1024x600@60Hz (pass 1) CRTC 64: trying mode 640x480@60Hz with output at 1024x600@60Hz (pass 1)

    Read the article

  • Is the Joel Test really a good gauging tool?

    - by henry
    I just learned about the Joel Test. I have been computer programmer for 22 years, but somehow I never heard about it before. I consider my best job so far to be this small investment managing company with 30 employees and only three people in the IT department. I am no longer with them, but I had being working there for five years – my longest streak with any given company. To my surprise they scored extremely poor on the Joel Test. The only two questions I would answer “yes” are #4: Do you have a bug database? And #9: Do you use the best tools money can buy? Everything else is either “sometimes” or straight “no”. Here is what I liked about the company however: Good pay. They bragged about it to my face, and I bragged about it to their face, so it was almost like a family environment. I always knew the big picture. When writing code to solve a particular problem there were no ambiguity about the business nature of that problem. Even though we did not always had written specifications we could ask business users a question anytime, often yelling it across the floor. I could even talk to executives any time I felt like doing it: no appointment necessary. Immediate feedback. Once we implement a solution and make business users happy they immediately let us know that, we (programmers) become heroes of the moment. No red tape. I could always buy any tools I deemed necessary, and design solutions the way my professional judgment dictates. Flexibility. If I had mid-day dental appointment that is near my house rather than near the office, I would send email to the company: "FYI: I work from home today". As long as one of three IT guys was on the floor (to help traders in case their monitors go dark) they did not care where two others were. So the question thus becomes: How valuable is the Joel Test? Why bother with it?

    Read the article

  • 12.04 boots fine, with graphical splash screen, but then Monitor "out of range"

    - by Jim Bednar
    I see dozens of posts from people whose monitors are saying "out of range" under Ubuntu; seems like there are some serious problems in Ubuntu with autodetection of monitor capabilities. :-( But none of the many, many suggestions I found have solved my problem, and right now I can't use anything graphical on this machine! History: I installed Ubuntu 12.04 on my HP Proliant Microserver N40L, which worked reasonably at the default resolution across several reboots. At some point I noticed that the proprietary video driver was not in use, and tried to install one to get better window-drawing speeds, but it failed with some sort of error, and I gave up on that. A few weeks later when I next rebooted, it showed the usual BIOS screen and various boot loading screens (including GRUB), and then the usual purple Ubuntu splash screen with the dots showing that things were loading, but when it finished booting the monitor went black and eventually showed "Out of range" (with no other information). Given that there were several weeks between reboots (it's a server, after all), I've no idea if it was some system update, trying to install the proprietary drivers, or something else that caused the problem. Anyway, the system has booted fine, as I can do Ctrl-Alt-F1 to get a text prompt and can log in there. But Ctrl-Alt-F7 goes back to the out of range error. Some posters said to try Ctrl-Alt-- (minus) to cycle through resolutions until one works, but that didn't have any visible effect. Many, many others said it was a grub problem, which seems unlikely given that grub's screen looks fine, but I tried editing /etc/default/grub to set a particular resolution (trying many of them) and running update-grub, with no apparent effect. Rebooting into failsafe mode works the same as regular mode. Replacing xorg.conf with xorg.conf.failsafe works the same too. I'm at my wits' end! Isn't there anything I can do to convince Ubuntu to choose a mode that the monitor supports? E.g. the one that it is using for the splash screen? I don't need great resolution on this machine, just anything that works!!!!! Help!!!!!! Please!!!!

    Read the article

  • Java: How to manage UDP client-server state

    - by user92947
    I am trying to write a Java application that works similar to MapReduce. There is a server and several workers. Workers may come and go as they please and the membership to the group has a soft-state. To become a part of the group, the worker must send a UDP datagram to the server, but to continue to be part of the group, the worker must send the UDP datagram to the server every 5 minutes. In order to accommodate temporary errors, a worker is allowed to miss as many as two consecutive periodic UDP datagrams. So, the server must keep track of the current set of workers as well as the last time each worker had sent a UDP datagram. I've implemented a class called WorkerListener that implements Runnable and listens to UDP datagrams on a particular UDP port. Now, to keep track of active workers, this class may maintain a HashSet (or HashMap). When a datagram is received, the server may query the HashSet to check if it is a new member. If so, it can add the new worker to the group by adding an entry into the HashSet. If not, it must reset a "timer" for the worker, noting that it has just heard from the corresponding worker. I'm using the word timer in a generic sense. It doesn't have to be a clock of sorts. Perhaps this could also be implemented using int or long variables. Also, the server must run a thread that continuously monitors the timers for the workers to see that a client that times out on two consecutive datagram intervals, it is removed from the HashSet. I don't want to do this in the WorkerListener thread because it would be blocking on the UDP datagram receive() function. If I create a separate thread to monitor the worker HashSet, it would need to be a different class, perhaps WorkerRegistrar. I must share the HashSet with that thread. Mutual exclusion must also be implemented, then. My question is, what is the best way to do this? Pointers to some sample implementation would be great. I want to use the barebones JDK implementation, and not some fancy state maintenance API that takes care of everything, because I want this to be a useful demonstration for a class that I am teaching. Thanks

    Read the article

  • PeopleSoft Grants & the Federal Agency Letter of Credit Draw Changes

    - by Mark Rosenberg
    For decades, most, if not all, US Federal agencies that sponsor research allowed grant recipients to request and receive payments using pooled accounts, commonly known as pooled letter of credit (LOC) draws. This enabled organizations, such as universities and hospitals, fast and efficient access to reimbursement of the expenditures they incurred conducting research across a portfolio of grants. To support this business practice, the PeopleSoft Grants solution has delivered an LOC Draw report to provide the total request amount along with all of the supporting invoice details for reconciliation and audit purposes. Now, in an attempt to provide greater transparency, eliminate fraud, strengthen accountability for grant-related financial transactions, and simplify grant award closeout, many US Federal sponsors are transitioning from the “pooling” letter of credit draw method to requesting on a “grant-by-grant” basis. The National Science Foundation, the second largest issuer of Federal awards, already transitioned to detailed grant draws in 2013. And, in response to the U.S. Department of Health and Human Services (HHS) directive to HHS-supported Agencies, the largest Federal awards sponsor, the National Institutes of Health (NIH), will fully transition to the new HHS subaccount draw method. This will require NIH award recipients to request payments based on actual expenses incurred on an award-by-award basis. NIH is expected to fully transition to this new draw method by the end of Federal fiscal year 2015.  (The NIH had planned to fully transition to this new method by the end of fiscal 2014; however, the impact to institutions was deemed to be significant enough that a reprieve was recently granted.) In light of these new Federal draw requirements, we have recently released these new features to aid our customers on both PeopleSoft Grants releases 9.1 and 9.2:1. Federal Award Identification Number on the Proposal and Award Profile 2. Letter of credit fields on contract lines to support award basis draws and comply with Federal close out mandates3. Process to produce both pro forma and final LOC Draw Reports in BI Publisher report format4. Subacccount ID field on the LOC Summary and a new BI Publisher version of the LOC Summary report 5. Added Subaccount Field and contract info to be displayed on the LOC summary page6. Ability to generate by a variety of dimensions pro forma and invoiced draw listings 7. Queries for generation and manipulation of data to upload into sponsor payment request systems and perform payment matching8. Contracts LOC Close Out query to quickly review final balances prior to initiating final draws and preparing Federal Financial Reports prior to close The PeopleSoft Development team actively monitors this and other major Federal changes and continues working closely with the Grants Product Advisory Group of the Higher Education User Group to ensure a clear understanding of what our customers need in order to transition to new approaches for doing business with the Federal government. For more information regarding the enhancements to the PeopleSoft Grants solution, existing customers can login to My Oracle Support and review the Enhancements to Letter of Credit Process (Doc ID 1912692.1) associated with resolution ID 904830. This enhanced LOC functionality is available in both PeopleSoft FSCM 9.1 Bundle #31 and PeopleSoft FSCM 9.2 Update Image 8.

    Read the article

  • Ubuntu Linux won't display netbook's native resolution

    - by Daniel
    FYI: My Netbook model is HP Mini 210-1004sa, which comes with Intel Graphics Media Accelerator 3150, and has a display 10.1" Active Matrix Colour TFT 1024 x 600. I recently removed Windows 7 Starter from my netbook, and replaced it with Ubuntu 12.10. The problem is the OS doesn't seem to recognise the native display resolution of 1024x600 i.e. the bottom bits of Ubuntu is hidden beneath the screen & the only 2 available resolutions are: the default 1024x768 and 800x600. I've also thought about replacing Ubuntu with Lubuntu or Puppy Linux, as the system does run a bit slow, but I can't, as then I won't be able to access the taskbar and application menu which will be hidden beneath the screen. Only Ubuntu with Unity is currently usable, as the Unity Launcher is visible enough. I was able to define a custom resolution 1024x600 using the Q&A: How set my monitor resolution? but when I set that resolution, there appears a black band at the top of the screen and the desktop area is lowered, with bits of it hidden beneath the screen. I tried leaving it at this new resolution and restarting the system to see if the black band would disappear & the display will fit correctly, but it gets reset to 1024x768 at startup and displays following error: Could not apply the stored configuration for monitors none of the selected modes were compatible with the possible modes: Trying modes for CRTC 63 CRTC 63: trying mode 800x600@60Hz with output at 1024x600@60Hz (pass 0) CRTC 63: trying mode 800x600@56Hz with output at 1024x600@60Hz (pass 0) CRTC 63: trying mode 640x480@60Hz with output at 1024x600@60Hz (pass 0) CRTC 63: trying mode 1024x768@60Hz with output at 1024x600@60Hz (pass 1) CRTC 63: trying mode 800x600@60Hz with output at 1024x600@60Hz (pass 1) CRTC 63: trying mode 800x600@56Hz with output at 1024x600@60Hz (pass 1) CRTC 63: trying mode 640x480@60Hz with output at 1024x600@60Hz (pass 1) Trying modes for CRTC 64 CRTC 64: trying mode 1024x768@60Hz with output at 1024x600@60Hz (pass 0) CRTC 64: trying mode 800x600@60Hz with output at 1024x600@60Hz (pass 0) CRTC 64: trying mode 800x600@56Hz with output at 1024x600@60Hz (pass 0) CRTC 64: trying mode 640x480@60Hz with output at 1024x600@60Hz (pass 0) CRTC 64: trying mode 1024x768@60Hz with output at 1024x600@60Hz (pass 1) CRTC 64: trying mode 800x600@60Hz with output at 1024x600@60Hz (pass 1) CRTC 64: trying mode 800x600@56Hz with output at 1024x600@60Hz (pass 1) CRTC 64: trying mode 640x480@60Hz with output at 1024x600@60Hz (pass 1)

    Read the article

  • Interaction of a GUI-based App and Windows Service

    - by psubsee2003
    I am working on personal project that will be designed to help manage my media library, specifically recordings created by Windows Media Center. So I am going to have the following parts to this application: A Windows Service that monitors the recording folder. Once a new recording is completed that meets specific criteria, it will call several 3rd party CLI Applications to remove the commercials and re-encode the video into a more hard-drive friendly format. A controller GUI to be able to modify settings of the service, specifically add new shows to watch for, and to modify parameters for the CLI Applications A standalone (GUI-based) desktop application that can perform many of the same functions as the windows service, expect manually on specific files instead of automatically based on specific criteria. (It should be mentioned that I have limited experience with an application of this complexity, and I have absolutely zero experience with Windows Services) Since the 1st and 3rd bullet share similar functionality, my design plan is to pull the common functionality into a separate library shared by both parts applications, but these 2 components do not need to interact otherwise. The 2nd and 3rd bullets seem to share some common functionality, both will have a GUI, both will have to help define similar parameters (one to send to the service and the other to send directly to the CLI applications), so I can see some advantage to combining them into the same application. On the other hand, the standalone application (bullet #3) really does not need to interact with the service at all, except for possibly sharing a few common default parameters that can easily be put into an XML in a common location, so it seems to make more sense to just keep everything separate. The controller GUI (2nd bullet) is where I am stuck at the moment. Do I just roll this functionality (allow for user interaction with the service to update settings and criteria) into the standalone application? Or would it be a better design decision to keep them separate? Specifically, I'm worried about adding the complexity of communicating with the Windows Service to the standalone application when it doesn't need it. Is WCF the right approach to allow the controller GUI to interact with the Windows Service? Or is there a better alternative? At the moment, I don't envision a need for a significant amount of interaction, maybe just adding a new task once in a while and occasionally tweaking a parameter, but when something is changed, I do expect the windows service to immediately use the new settings.

    Read the article

  • What You Said: Staying Productive While Working from home

    - by Jason Fitzpatrick
    Earlier this week we asked you to share your telecommuting/work-from-home productivity tips. Now we’re back with a tips and tricks roundup; read on to see how your fellow readers stay focused at home. By far and away the most common technique deployed as carefully isolating work from home life. Carol writes: I love working from home and have done so for 6 years now. I have a routine just as if I was going to an office, except my commute is 12 steps. I get ready for work, grab my purse and smart phone and go to up the steps to my office. I maintain a separate phone line and voice mail for work that I cannot answer from anywhere but my work desk. I use call forwarding when I travel so only my office phone number is published. I have VOIP phone service so I can forward calls from the internet if I forget, or need to change where the phone is forwarded. I do have a wired and wireless head set so I can go get a cold drink if on one of those long boring conference calls. I plan my ‘get off from work’ time and try to stick to it, as with any job some days I am late getting off, but it all works out. I make sure my office is for work only, any other computer play time is in a different part of the house on different computer. My office has laptop, dock, couple of monitors, multipurpose printer, fax, scanner, file cabinets – just like the office at a company. I just also happen to have a couple of golden retrievers that come to work with me and usually lay quietly until 5, and yes they know it is 5pm sometimes before I do. For me, one of the biggest concerns when working from home is not being unproductive, but the danger of never stopping work. You could keep going and going because let’s face it – the company will let you do it, so I set myself up to prevent that and maintain a separateness. HTG Explains: Does Your Android Phone Need an Antivirus? How To Use USB Drives With the Nexus 7 and Other Android Devices Why Does 64-Bit Windows Need a Separate “Program Files (x86)” Folder?

    Read the article

  • Office lights on or off in programming department? How to decide? [closed]

    - by smp7d
    At my company, the programmers who sit in the same area are constantly fighting over whether the lights stay on or off. Because there is no official policy it makes it a particularly sticky situation. We are a typical cube-farm and we have those typical cube-farm fluorescent lights and smaller ones at our desks. With the lights off, it is difficult to read and you would probably need to turn on your desk light (which some people do anyway). All programmers in our department do most of their reading on their monitor because of the nature of our business. Some feel that we should have a vote to decide whether the lights stay on or off. A couple who prefer 'lights on' feel that the vote would need to be unanimous to turn them off as having them on is the more natural office setting. Those who want them off point out that all other departments keep their lights off. I have heard all of the arguments: -Fluorescent lights cause eye strain -Reading in dark causes eye strain -The desk lights can be used if light is needed -People from other departments feel uncomfortable approaching us in the "dark" -The monitors are harder to see in the light ... Right now, some of the developers turn off the lights and some turn them on. It really just depends who last walked by the switch. I am a bit sick of the controversy as it feels a bit childish at the moment. I'm tired of hearing about it and I'm tired of having to talk about it. I tried to help them decide but as I explained, voting wasn't enough. Do other programming departments have this same argument? What is the standard or traditionally accepted option in a programming area? Are there any good reasons for one way or the other outside of preference? How can we decide fairly? EDIT Just a little more info... We do not have clients/visitors come into our office. We do have windows and hall lights that make our environment plenty bearable with the lights off. It kind of resembles a meeting room that has the lights off during a powerpoint presentation.

    Read the article

  • Tomcat SPNEGO authentication against Active Directory not working.

    - by Michael
    I'm trying to authenticate against AD using the http://spnego.sourceforge.net component with tomcat. I've created my SPN's "setspn.exe -A HTTP/servername SVCTomcat" & "setspn.exe -A HTTP/servername.fqdn.net SVCTomcat" I've created my krb5.conf & login.conf file and setup the filter in the web.xml ie. <filter-name>SpnegoHttpFilter</filter-name> <filter-class>net.sourceforge.spnego.SpnegoHttpFilter</filter-class> <param-name>spnego.allow.unsecure.basic</param-name> <param-value>false</param-value> <param-name>spnego.login.client.module</param-name> <param-value>spnego-client</param-value> <param-name>spnego.krb5.conf</param-name> <param-value>krb5.conf</param-value> <param-name>spnego.login.conf</param-name> <param-value>login.conf</param-value> <param-name>spnego.preauth.username</param-name> <param-value>SVCTomcat</param-value> <param-name>spnego.preauth.password</param-name> <param-value>Pasword</param-value> <param-name>spnego.login.server.module</param-name> <param-value>spnego-server</param-value> <param-name>spnego.prompt.ntlm</param-name> <param-value>false</param-value> <param-name>spnego.logger.level</param-name> <param-value>2</param-value> Note i've stripped extraneous tags from this, so it's not the actual XML. When i go to a page protected by this filter i get this in the catalina logfile. 25-Mar-2010 12:41:26 org.apache.catalina.startup.Catalina start INFO: Server startup in 4615 ms 25-Mar-2010 12:41:47 net.sourceforge.spnego.SpnegoHttpFilter doFilter FINE: principal=SYSTEM@TESTDOMAIN And in the hello_spnego.jsp example on the website it just reports the name of the user tomcat is running as (SYSTEM), not the user i'm connecting with. It seems the author stopped halfway through his debugging page, so i've no areas to look in other than to triple check my config. Any ideas?

    Read the article

  • Low framerate on background apps

    - by user1698923
    My problem is that when a game is running in the foreground, in Full Screen mode, any applications on my second monitor (such as youtube videos, videos, not app specific) drop their frame-rate to about 2-3 FPS. It seems like some sort of power management option that I can't track down. As far as I can tell, it's not due to the GPU not being able to keep up. For instance, my PC can play League of Legends at about 280FPS when the framerate is uncapped. If i cap it at 60FPS using the in-game option, it has no affect on the performance of the background app. Summary Operating System Windows 8 Pro 64-bit CPU Intel Core i7 3820 @ 3.60GHz 42 °C Sandy Bridge-E 32nm Technology RAM 12.0GB Triple-Channel DDR3 @ 533MHz (7-7-7-20) Motherboard Gigabyte Technology Co., Ltd. X79-UD3 (SOCKET 0) 37 °C Graphics DELL U2713HM (2560x1440@59Hz) DELL U2713HM (2560x1440@59Hz) 1280MB NVIDIA GeForce GTX 570 (Gigabyte) 58 °C Hard Drives 212GB Volume0 (RAID) 1863GB Western Digital WDC WD20EARS-00MVWB0 (SATA) 36 °C 1863GB Western Digital WDC WD20EARS-00MVWB0 (SATA) 34 °C Optical Drives No optical disk drives detected Audio ASUS Xonar Essence STX Audio Device Operating System Windows 8 Pro 64-bit Computer type: Desktop Graphics Monitor 1 Name DELL U2713HM on NVIDIA GeForce GTX 570 Current Resolution 2560x1440 pixels Work Resolution 2560x1400 pixels State Enabled, Output devices support Multiple displays Extended, Secondary, Enabled Monitor Width 2560 Monitor Height 1440 Monitor BPP 32 bits per pixel Monitor Frequency 59 Hz Device \\.\DISPLAY4\Monitor0 Monitor 2 Name DELL U2713HM on NVIDIA GeForce GTX 570 Current Resolution 2560x1440 pixels Work Resolution 2560x1400 pixels State Enabled, Output devices support Multiple displays Extended, Primary, Enabled Monitor Width 2560 Monitor Height 1440 Monitor BPP 32 bits per pixel Monitor Frequency 59 Hz Device \\.\DISPLAY5\Monitor0 NVIDIA GeForce GTX 570 Manufacturer NVIDIA Model GeForce GTX 570 GPU GF110 Device ID 10DE-1086 Revision A2 Subvendor Gigabyte (1458) Series GeForce GTX 500 Current Performance Level Level 3 Current GPU Clock 845 MHz Current Memory Clock 1900 MHz Current Shader Clock 1690 MHz Voltage 0.988 V Technology 40 nm Die Size 520 mm² Release Date Dec 07, 2010 DirectX Support 11.0 OpenGL Support 5.0 Bus Interface PCI Express x16 Temperature 57 °C Driver version 9.18.13.2018 BIOS Version 70.10.55.00.01 ROPs 40 Shaders 512 unified Memory Type GDDR5 Memory 1280 MB Bus Width 64x5 (320 bit) Filtering Modes 16x Anisotropic Noise Level Moderate Max Power Draw 219 Watts Count of performance levels : 3 Level 1 - "Default" GPU Clock 50 MHz Memory Clock 135 MHz Shader Clock 101 MHz Level 2 - "2D Desktop" GPU Clock 405 MHz Memory Clock 324 MHz Shader Clock 810 MHz Level 3 - "3D Applications" GPU Clock 845 MHz Memory Clock 1900 MHz Shader Clock 1690 MHz Things I've tried: 1) Updating the graphics driver 2) Setting windows power mode to High Performance 3) Reset Nvidia Global Performance settings to default

    Read the article

  • OpenSSH does not accept public key?

    - by Bob
    I've been trying to solve this for a while, but I'm admittedly quite stumped. I just started up a new server and was setting up OpenSSH to use key-based SSH logins, but I've run into quite a dilemma. All the guides are relatively similar, and I was following them closely (despite having done this once before). I triple checked my work to see if I would notice some obvious screw up - but nothing is apparent. As far as I can tell, I haven't done anything wrong (and I've checked very closely). If it's any help, on my end I'm using Cygwin and the server is running Ubuntu 12.04.1 LTS. Anyways, here is the output (I've removed/censored some parts for privacy (primarily anything with my name, website, or its IP address), but I can assure you that nothing is wrong there): $ ssh user@host -v OpenSSH_5.9p1, OpenSSL 0.9.8r 8 Feb 2011 debug1: Connecting to host [ipaddress] port 22. debug1: Connection established. debug1: identity file /home/user/.ssh/id_rsa type 1 debug1: identity file /home/user/.ssh/id_rsa-cert type -1 debug1: identity file /home/user/.ssh/id_dsa type -1 debug1: identity file /home/user/.ssh/id_dsa-cert type -1 debug1: identity file /home/user/.ssh/id_ecdsa type -1 debug1: identity file /home/user/.ssh/id_ecdsa-cert type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.9p1 Debian-5ubuntu1 debug1: match: OpenSSH_5.9p1 Debian-5ubuntu1 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.9 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: sending SSH2_MSG_KEX_ECDH_INIT debug1: expecting SSH2_MSG_KEX_ECDH_REPLY debug1: Server host key: ECDSA 24:68:c3:d8:13:f8:61:94:f2:95:34:d1:e2:6d:e7:d7 debug1: Host 'host' is known and matches the ECDSA host key. debug1: Found key in /home/user/.ssh/known_hosts:2 debug1: ssh_ecdsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey debug1: Next authentication method: publickey debug1: Offering RSA public key: /home/user/.ssh/id_rsa debug1: Authentications that can continue: publickey debug1: Trying private key: /home/user/.ssh/id_dsa debug1: Trying private key: /home/user/.ssh/id_ecdsa debug1: No more authentication methods to try. Permission denied (publickey). What can I do to resolve my problem?

    Read the article

  • SSD Fresh Does Not Start

    - by Jim Fell
    I recently installed a new 60GB SSD as my primary hard drive and re-installed Windows 7 Professional 64-bit. I then installed SSD Fress from Abelssoft to optimize Windows to run on the SSD. It seemed to install okay, but when I try to run the utility, its splash screen appears briefly before it quietly closes. No errors are displayed; the utility just fails to launch. I have run SSD Fresh on another SSD-equipped Windows 7 Pro x64 computer in the past without any problems. Does anyone know what might be preventing the program from running? I tried shutting down the Spybot Resident and disabling the firewall and virus scanner with no luck. I also tried running the tool as administrator; I even tried reinstalling it, running the installer as administrator. No luck. Every time I try to launch the program the Event Viewer logs this same set of errors: Error 4/2/2012 11:35:44 PM Application Error 1000 (100) Error 4/2/2012 11:35:43 PM .NET Runtime 1026 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None For those who are interested, here is my system configuration: ASRock M3A770DE AM3 AMD 770 ATX AMD Motherboard AMD Athlon II X3 455 Rana 3.3GHz Socket AM3 95W Triple-Core Desktop Processor ADX455WFGMBOX G.SKILL Value Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10600) Desktop Memory Model F3-10600CL9D-8GBNT Mushkin Enhanced Chronos Deluxe MKNSSDCR60GB-DX 2.5" 60GB SATA III Synchronous MLC Internal Solid State Drive (SSD) (Primary/Boot HD) Western Digital Caviar Blue RFHWD1600AAJS 160GB 7200 RPM SATA 3.0Gb/s 3.5" Internal Hard Drive -Bare Drive (Secondary HD) Sony Optiarc CD/DVD Burner Black SATA Model AD-7261S-0B LightScribe Support RAIDMAX RX-850AE 850W ATX12V v2.3 / EPS12V SLI Certified CrossFire Ready 80 PLUS GOLD Certified Modular Active PFC Power Supply ASUS HD7850-DC2-2GD5 Radeon HD 7850 2GB 256-bit GDDR5 PCI Express 3.0 x16 HDCP Ready CrossFireX Support Video Card Asus ML228H 21.5" Full HD LED BackLight LED Monitor Slim Design (x3)

    Read the article

  • System won't boot: Gigabyte HD 7790 1GB OC GPU issue or Corsair VS550 PSU issue?

    - by MGOwen
    Installed a new GPU, and PC won't boot. Turn it on and: No monitor signal at all (tried HDMI and VGA via DVI, on 2 working monitors). CPU and GPU fans DO spin, but No system beeps, no sounds from drives (they might make a small noise in the first 1 second or so, but there's definitely no OS loading or anything like that) If hit "power off" button it turns off immediately (no holding down for 3 seconds like usual) If I put my old HD 5670 GPU back in, everything works fine. But (plot twist!) card is not totally dead. My friend put it in his PC, and it works fine (he even played a game for 15 minutes, no issues). He has a Corsair TX850 850W and a Gigabyte MB. So my main theory is: the GPU isn't getting enough power from the PSU. But is it: Bad PSU? Seems unlikely, since it works fine with the other GPU. Also, the PSU Is brand new and 550W (single 42A/504W 12V rail). Overkill for this GPU. Corsair is a decent brand, but maybe just mine is faulty? Bad GPU? Could it be drawing more power than it should be, somehow, or something? Supposedly HD 7790 needs only 21A/75W on the 12v rail, though this one is factory overclocked a bit... but should that triple the power requirement? Something else? Could there be a motherboard incompatibility somehow? Both MB and GPU are less than a year old and PCI Express 3.0 x16. Things I've tried: Re-seating the video card Testing PC with old GPU (works fine, same PCIe slot). Checked AMD's stated amp/watt requirements of a 7790 and my PSU (see above). My PSU can output twice the amps (single rail) and 5x the Wattage a 7790 needs. Here are the full specs: Gigabyte HD 7790 1GB OC GPU Corsair VS550 550W PSU 4GB RAM AsRock H61M U3S3 motherboard i3-2100 500GB SATA HDD (2007-ish) blu-ray drive (new) PCI 802.11g card Edit: Motherboard BIOS Update seems to have fixed it. (If anyone has same problem and it doesn't work, comment here).

    Read the article

  • Windows 7 pro remote desktop true multi monitor support patch or hack

    - by Ryan D
    After hours of research the closest i came to any patch that could fix this was a concurrent sessions patch which is not what i want. I have two machines both windows 7 professional. Its not an option to upgrade either to ultimate as the computer being remoted is in another state at our corp office. I need Dual monitor support and would have used the multimon i:1 edit thing however the other tower is not Win 7 ultimate. I have read over and over how it is not supported except with ultimate and enterprise and 2008 server. What have they put into windows 7 ultimate that is not in Win 7 pro and how can i get it or patch Win 7 pro to give it the same functionality. I would have paid for a software patch had i been able to find it anywhere. Summary: I am looking for the ability to remote to a Win 7 pro computer with another Win 7 computer while being able to use Dual monitors. Is there anyone that has the skill or balls to help with this? Most Respectfully Ryan

    Read the article

  • HA Proxy Stick-table and tcp-connection configuration

    - by Vladimir
    I am using HA Proxy HA-Proxy version 1.4.18 2011/09/16 I am trying to insert the following into /etc/init.d/haproxy.cfg file # Use General Purpose Couter (gpc) 0 in SC1 as a global abuse counter # Monitors the number of request sent by an IP over a period of 10 seconds stick-table type ip size 1m expire 10s store gpc0,http_req_rate(10s) tcp-request connection track-sc1 src tcp-request connection reject if { src_get_gpc0 gt 0 } # Table definition stick-table type ip size 100k expire 30s store conn_cur(3s) # Allow clean known IPs to bypass the filter tcp-request connection accept if { src -f /etc/haproxy/whitelist.lst } # Shut the new connection as long as the client has already 10 opened tcp-request connection reject if { src_conn_cur ge 10 } tcp-request connection track-sc1 src I get the following error: [ALERT] 256/113143 (4627) : parsing [/etc/haproxy/haproxy.cfg:36] : stick-table: unknown argument 'store'. [ALERT] 256/113143 (4627) : parsing [/etc/haproxy/haproxy.cfg:37] : unknown argument 'connection' after 'tcp-request' in proxy 'http_proxy' [ALERT] 256/113143 (4627) : parsing [/etc/haproxy/haproxy.cfg:38] : unknown argument 'connection' after 'tcp-request' in proxy 'http_proxy' [ALERT] 256/113143 (4627) : parsing [/etc/haproxy/haproxy.cfg:41] : stick-table: unknown argument 'store'. [ALERT] 256/113143 (4627) : parsing [/etc/haproxy/haproxy.cfg:43] : unknown argument 'connection' after 'tcp-request' in proxy 'http_proxy' [ALERT] 256/113143 (4627) : parsing [/etc/haproxy/haproxy.cfg:45] : unknown argument 'connection' after 'tcp-request' in proxy 'http_proxy' [ALERT] 256/113143 (4627) : parsing [/etc/haproxy/haproxy.cfg:46] : unknown argument 'connection' after 'tcp-request' in proxy 'http_proxy' [ALERT] 256/113143 (4627) : Error(s) found in configuration file : /etc/haproxy/haproxy.cfg [WARNING] 256/113143 (4627) : Proxy 'http_proxy': in multi-process mode, stats will be limited to process assigned to the current request. [ALERT] 256/113143 (4627) : Fatal errors found in configuration. [fail] Could you please tell me what is wrong with the code? Thanks!

    Read the article

  • Why is usable RAM less than total RAM?

    - by D Connors
    My girlfriend bought a laptop last week. It's a core 2 duo with 4 GB We installed vista 64bit, and one of the first things we did was right click on "My computer" to see gthe properties. Immediately we noticed something strange about her RAM, the line said: Installed memory (RAM): 4,00 GB (3,68 GB usable) I told her not to worry, thinking it must be something about the laptop hardware (considering her vista installation came from the same DVD as mine, and I never noticed anything like that on my 4 GB desktop). One hour ago, it got worse. We looked at Properties again, and it now says: Installed memory (RAM): 4,00 GB (2,98 GB usable) What does that mean? Are those 1,02 GB missing or being used by the system? EDIT: There is a possibility that the sytem information is wrong. I just noticed that it reports an intel T6500 processor, when it's actually a T6400. How can I find out how much RAM is really available to the system? EDIT2: Checking the resource monitors, it says 1003 MB are reserved for the hardware. Is that good or bad? Thanks

    Read the article

  • Laptop Asus P50IJ with Intel 4500M GMA output going to a Dell 1907FP external monitor will not allow

    - by ProfessionalAmateur
    Hello - I just purchased an Asus P50IJ-X2 laptop which has a Intel GMA 4500M video card running Windows7. At work I output this laptop to a Dell 1907FP LCD which has a maximum resolution of 1280x1024. Not matter what I do the Windows will not allow the laptop to set a resolution higher than 1024x768 to this LCD monitor. Ive even gone to the extent of downloading PowerStrip (I'd post a link but Im new and can only enter 1 url, if you google for powerstrip its the first option) to create a custom driver for my monitor thinking Windows was having a hard time seeing the available resolutions it would accept. However, powerstrip read the registery and properly sees the monitor and what its capable of so Im now at a complete loss as to why Windows7 will not allow me to set/use a 1280x1024 resolution for this external monitor (as my last laptop did running Vista). The Intel documentation (http://software.intel.com/en-us/articles/quick-reference-guide-to-intel-integrated-graphics/) indicates that the GMA 4500M should be able to run up to a 2560x1600 max res. The Dell 1907FP specification states it can run up to a 1280x1024 res. But no matter what the computer will not allow me to set higher than a 1024x768. I'm completely baffled but I would really like to be able to output this laptop to a reasonable resolution, 1024x768 makes me feel like I'm using my mom's computer. Any help would be greatly appreciated! Here are some attached images (I apologize for the links, being new I cannot post images) that should help explain this better: Image 1 - This image is from powerstrip which shows the monitors max accepted resolution and at the top right the max res my PC currently allows. (http://imgur.com/agrno.png) Image 2 - This shows my Windows7 resolution picker. (http://imgur.com/3nv6q.png) Image 3 - The 'List all modes' option taken from the Screen Resolution Advanced Settings List All Modes. (http://imgur.com/AMREh.png) Image 4 - Monitor information from registry read by powerstrip, this shows the laptop is able to read the necessary info from the LCD monitor. (http://imgur.com/hUX4D.png)

    Read the article

  • Ubuntu/Nvidia lists DVI dual cable as single

    - by Joseph Mastey
    I have an NVidia Quadro FX 880M graphics card, from which I am trying to drive 2 monitors: my internal laptop montior (15.6", 1920x1080, Nvidia driver says it's running via DisplayPort) and an external 27" monitor (Dell U2711, 2560x1440 native resolution, via DVI). I've hooked the dual DVI cable to the dual DVI port on my dock (Dell PR03X) and installed the proprietary NVidia driver, but I cannot seem to get the full 2560x1440 out of the larger 27" external monitor. Looking at the NVidia driver settings, the monitor's connection is reported as a single DVI cable, rather than a dual one, which would explain the reduced resolution. Does anyone have any experience with an issue like this? What can I do to make full use of my new monitor? (Possibly) Relevant Information: There is no DVI port on the laptop itself, but one is provided via the dock. The laptop and dock both provide a DisplayPort jack, but I have been unable to get this working on either w/ the monitor. I did have the nouveau driver installed when I installed the nvidia proprietary driver, but have since removed it (no change in the monitor situation when I removed it). The 27" reports a max resolution of 1680x1050. Thanks, Joe

    Read the article

  • How to configure Hyper-V failover cluster to live migrate when dynamic memory runs out?

    - by Matt Johnson
    Appologies in advance that this is not a direct programming question, but I have a feeling that the solution involves custom powershell scripts (maybe), so this is as good a place to ask as any. I maintain a website that has a large Hyper-V cluster for SQL Servers. We are using Windows 2008 R2 SP1, and the new "dynamic memory" feature. I've already ready reviewed the Best Practices Guide, and implemented it's suggested configuration. Everything works well, except that when SQL demand increases memory pressure to expand to more memory than is available on the physical machine, the memory status goes into the "Warning" state and stays there. I assume the hypervisor is using a swapfile on the host to fulfill the memory requirement, thus slowing the virtual machine down. When this happens, there are plenty of other nodes in the cluster that have available resources. I can live-migrate the virtual server over there and everything works, and the warnings go away. Now how can I automate this? I see no menu options in either Hyper-V or the Failover Cluster Manager for performing a migration or shutdown when dynamic memory goes into the warning state. Any ideas about how to script this, or monitor it and invoke the action directly, would be helpful. If the solution involves coding, powershell would be ideal, but I could envison this as a .Net Service that monitors for this state and kicks off the migration request. I just don't know what objects are involved in doing the monitoring or kicking off the live migration. Thanks in advance.

    Read the article

  • How can I calculate power consumption of my PC in Watt?

    - by Jitendra vyas
    How can I calculate power consumption of my PC in Watt, to prove my House owner ( I live on rent) , my PC doesn't consume much power? He blames me for Huge power bills even he too use Fridge, A.C. etc and his son watch the TV all the time. We both share one Power meter so for bill we pay 50%-50% but He is saying I use PC all the time even night i keep on for downloading. I just want to calculate power consumption of my PC then will calculate monthly expense of unit as per my City's per unit price for power. I've Windows: Microsoft Windows XP Professional 5.1.2600 Service Pack 3 Memory (RAM): 960 MB CPU Info: AMD Sempron(tm) Processor 2500+ CPU Speed: 1399.0 MHz Sound card: Vinyl AC'97 Audio (WAVE) Display Adapters: VIA/S3G UniChrome Pro IGP | NetMeeting driver | RDPDD Chained DD Monitors: 1 - 17inch LCD - LG Screen Resolution: 1280 X 768 - 32 bit Network: Network Present Network Adapters: Bluetooth Device (Personal Area Network) #2 | WAN (PPP/SLIP) Interface CD / DVD Drives: I: ELBY CLONEDRIVE COM Ports: COM1 | COM2 | COM7 | COM8 | COM9 | COM10 LPT Ports: LPT1 Mouse: 3 Button Wheel Mouse Present Hard Disks: C: 29.3GB | D: 29.3GB | E: 97.7GB | F: 97.7GB | G: 211.9GB USB Controllers: 5 host controllers. Firewire (1394): 1 host controllers. Manufacturer: Phoenix Technologies, LTD Product Make: MS-7142 AC Power Status: OnLine BIOS Info: AT/AT COMPATIBLE | 01/18/06 | VIAK8M - 42302e31 Motherboard: MICRO-STAR INTERNATIONAL CO., LTD MS-7142 Modem: ZTE USB Modem FFFE CDMA #2

    Read the article

  • Display stretches 4:3 ratios; Adds scrolling to other ratios

    - by Matt
    I have a dual monitor setup. Normally, they both display at 1680x1050. They have been setup this way for about a year. I'm using Windows XP Professional 2003 x64 SP2. Today, out of nowhere, one of the monitors kicked back to a lower resolution. I was not playing with any configuration at the time.. in fact all I had done was close a window (maybe a browser). But the thing is that the resolution is still preserved partially by the fact that the screen will scroll when you move the mouse. So it's like looking through a 1024x768 window into a 1680x1050 world. The monitor itself does not appear to be damaged, because I also have it connected to my netbook (via KVM) and higher resolutions work fine. I tried uninstalling/reinstalling the drivers to no avail. System restore doesn't help either. I'm unsure of the exact ATI card I'm using.. Device Manager lists it as "Radeon X300/X550/X1050". There is no Catalyst Control Center software installed. I tried to install it, but there doesn't seem to be a way to install it by itself ... it forces you to install another driver, which breaks both of my displays, forcing me to go into safe mode and run system restore again. Any ideas? Thanks EDIT: After playing around more, I discovered that the "scrolling" behavior is only present for aspect ratios that are not 4:3. For 4:3 ratios, it just stretches out to fit the wide screen. My monitor's native ratio is 16:9 .. what could be causing it to think it needs to scroll?

    Read the article

< Previous Page | 62 63 64 65 66 67 68 69 70 71 72 73  | Next Page >