Search Results

Search found 5789 results on 232 pages for 'tuner card'.

Page 66/232 | < Previous Page | 62 63 64 65 66 67 68 69 70 71 72 73  | Next Page >

  • Unusable network, packet losses between router and NIC

    - by KáGé
    I have this setup: Gigabyte P35-DS3P motherboard Asus NX1101 PCI network card (the one on the motherboard got fried a few years ago by a power surge) Asus RT-N16 router Windows 7 x64 I think the other specs are irrelevant here, but I'll post them if you say so. Until a week ago everything was fine, but then my network became unusable: websites start loading but timeout before anything would come through (true for the web interface of the router as well), I can't reach the computer from my notebook and Windows' ping utility measures a ~50% packet loss between the computer and the router. Pinging localhost is good. The router works completely fine when wired to my notebook. I also tested different ports on the router, different cables, different router and connecting directly to the modem, but it's still the same. Sometimes it works for a few minutes right after turning on the machine, but then it becomes crap again, but mostly it's useless from the start. I've tried updating the firmware on the router, updating the driver for the network card (after which I started getting BSoDs in every 15 minutes), reinstalling Windows, swapping to Fedora 15 but none of them changed anything. Does this mean that the network card is dying, or could it be something else? If it's the card, what model do you recommend as a replacement? (Could be PCI or PCI-Ex x1) Thanks for your help.

    Read the article

  • How do I recover drivers from other hard disk

    - by Carl
    The drivers for a Cardbus (PCMCIA) card that gives me 2 USB 2.0 ports are on the hard disk from my old laptop. I have lost the driver CD. I have a way to get files from that other hard disk. Which files do I need? The drivers for the card used to be on the following website - the information is still there, except the download links don't work: http://www.ht-link.com/en/DownView.asp?ID=10 - The drivers I need are the first listing - The Win XP drivers for the HT-112NEC. My e-mails to them have not been answered. The information on this card is here http://www.ht-link.com/en/ProductView.asp?ID=106 I already tried connecting that other drive to my new laptop (via USB) and adding the drive to the search criteria when selecting update driver in the Device Manager. It says there isn't a better match, and if I select manual the matching device is not listed. (I don't think "manual" sees drivers on the external hard disk - but only ones on the main drive and/or found listed in the registry.) I would try 'have disk' if I knew exactly what file to point to on the external drive. The drivers are on that hard disk - I installed them there, and used that card on that computer. The new laptop has Windows XP Pro SP3, the old one had Pro SP2 Thanks for any help.

    Read the article

  • Starting old computer - nothing shown on screen at boot

    - by Jonas
    I'm trying to start an about 10 years old PC computer. But nothing is shown on the screen, and it beeps everytime I press a key on the keyboard. I can press Ctrl+Alt+Del to reboot the computer. The monitor is newer and seem to work with other computers. I don't see anything from POST/BIOS at start or later. I have tried to change to another graphic card, but it didn't change anything. What can I do to solve this problem? Update: I have now tried with another computer (the one where the "another graphic card" came from) and I got the same problem. I doesn't show anything on the screen. Both these computers had a GeForce2 MX 400 graphic card. I tried with another computer screen it didn't work - it was showing "signal out of range". So is the graphic card GeForce2 MX 400 too old for newer TFT-monitors? I tried with a third computer so I know that the monitors are working, and both monitors work fine with that computer.

    Read the article

  • Figuring out which PC part is faulty

    - by Davy8
    I have an odd scenario and I'm having trouble figuring out which is the faulty component. First of all, the video doesn't work, monitor says it's not getting a signal. Monitor's not faulty (works on other computer) so the first suspect was video card. However 2 things make me think it's not the video card. (Don't have another machine with PCIe around to test definitively) First, the GPU fan is spinning so it's getting power. Second, tried putting in an older PCI video card that is known to be working (pulled out of another working machine) and there's still no video. Normally if it's not the video card I'd suspect the motherboard, but everything's getting power on the mobo, so I'm not sure. The case apparently doesn't have system speakers, so can't hear any of the diagnostic beeps either. Also not sure whether a faulty CPU would cause no image at all either. The parts are brand new so something's going to get RMA'd but I'm not sure which component is to blame in this case. (Only slightly related, but I also accidentally put too much thermal paste on the CPU. The fan/heatsink instructions said to put the whole tube which seemed like a lot compared to previous experience, and as I started squeezing I knew it was definitely too much and stopped at about 1/3 but against my better judgement I didn't wipe any off. I'm not sure whether that would cause problems other than not cooling as effectively as it should)

    Read the article

  • Intel HD Graphics vs NVIDIA Quadro FX 380 PCI-E

    - by Michael
    I recently purchased an Acer Veriton which has an i5-650 processor, Windows 7 Pro (64 bit) and Intel HD Graphics listed as the video card. I also purchased a PNY nVIDIA Quadro FX 380 PCI-E card for improved picture and home video viewing and editing. I have already replaced the original 300 wattt power supply to a 430 watt Antec Truepower I had on hand and boosted the RAM to 8 gigs from the original 4. Question 1) Am I getting any improvement in visual quality or system speed with the Quadro or is it a waste of money and I should just save up to buy a bigger video card? This card was on sale for $115. If I am getting improvement then I need to ask another question. Question 2) Instructions for the Quadro installation are as follows... 1--Uninstall the existing VGA driver. -Remove the existing Display Driver via "Add or Remove Porgrams". -Shut down your computer. 2--Remove your Existing Graphics Board (or Disable Integrated 3D Graphics Controller). skipping instructions on how to remove existing graphics board -Systems with integrated (also know as on-board) 3D graphics may require you to disable the integrated 3D graphics system. Consult the owners or vendor manual that came with your PC on how to properly do this. So is the Intel HD Graphics considered a 3D graphics controller? If so should I just contact Acer or can anyone give me instructions? Thanks in advance for any help.

    Read the article

  • Configuring WPA WiFi in Ubuntu 10.10

    - by sma
    Hello, I am trying to configure my wireless network on my laptop running Ubuntu 10.10 and am having a bit of difficulty. I am a complete Linux newb, but want to learn it, hence the reason I'm trying to set this up. Here's the vitals: It is a Gateway 600 YG2 laptop. It was previously running Windows XP, but I installed Ubuntu 10.10 in place of it (not a dual boot, I removed XP altogether). I have an old wireless card that I'm trying to resurrect. I haven't really used the card in a couple years, but it seems to still work, I just can't connect to my home's wireless network. The card is a Linksys WPC11 v2.5. When I plug it in, Ubuntu recognizes the network, but won't connect to it. My home network uses WPA encryption and the only connection type that Ubuntu's network manager is giving me is WEP and then it asks for a key -- I have no idea what that key should be. So, basically, I'm asking, is there a way I can instead connect through WPA? I've tried creating a new connection in network manager, but that won't work, it keeps falling back to the WEP connection and asking me for a key. I have tried to install the XP driver using ndiswrapper but I don't know if that's working or not. Is there a way to tell if: A) the card is working as it should B) the correct drivers are installed (again, I installed the XP one using ndiswrapper NET8180.INF, but I'm not sure what to do next) Any help would be appreciated. Thank you.

    Read the article

  • Constant crashes in windows 7 64bit when playing games

    - by yx.
    I've tried everything I can possibly think of in trying to fix this problem and I'm totally out of ideas, so any help would be appreciated: The problem: whenever I fire up a game, it works for a short while with no problems and then it would crash. Either its a hard crash, forcing me to reboot, or windows would report that the display driver has stopped working and recovered. Here is a list of things I've already tried: Drivers - tried the latest drivers (catalyst 9.12) as well as the stock drivers that came with the video card. Also have the latest BIOS/chipset Memtest - Ran Memtest86+ overnight, had no problems, the windows diagnostic tool also does not find any problems. Overheating - Video card/cpu temperatures are well below peak (42 and 31 Celsius receptively) PSU Voltage - CPUID shows that the voltage levels are all above what they should be. The PSU itself is only roughly 16 months old and is a good model. HDD - No errors when checked GPU - Brand new (replaced previous card since I thought it was the problem, apparently not) Overclocking - Everything is at stock levels, memory voltage is set to manufacturer's standard Specs: Motherboard: ASUS P5Q Pro CPU: Core 2 Duo E8400 3.0 ghz OS: Windows 7 home premium 64 bit Memory: Mushkin Enhanced 4GB DDR2 GPU: Sapphire HD 5850 1GB PSU: SeaSonic M12 600W ATX12V DirectX: DX11 Event Viewer after a crash always has these logged: A fatal hardware error has occurred. Reported by component: Processor Core Error Source: Machine Check Exception Error Type: Bus/Interconnect Error Processor ID: 1 The details view of this entry contains further information. A fatal hardware error has occurred. Reported by component: Processor Core Error Source: Machine Check Exception Error Type: Bus/Interconnect Error Processor ID: 0 The details view of this entry contains further information. A previous card that I had (4850x2) also had these errors, so I changed video cards, but the same thing is happening.

    Read the article

  • What could possibly cause my computer to power down at random times?

    - by geoffreydv
    I have recently bought a new Power Supply and a new graphics card. My PC ran smoothly for a few months now but since a couple of days I'm having a strange problem. I am trying to isolate the problem to a specific piece of hardware (because if it's either the Power Supply or the Graphics card they are still under warranty). The problem started when I was playing a game (diablo 3). My PC suddenly powered down. I was unable to turn it on again by pressing the power button. I unplugged the power cable for a few seconds and plugged it back in. This time the pc powered on but the indication light turned orange instead of white as it normally does. The fans were not spinning and I did not see anything on my screen. After trying a couple of times I gave up. Two days later I tried again and this time the PC did boot up as usual. Everything looked okay until I tested if the problem was resolved by starting Diablo again. After about two minutes it powered down again as it did the first time. If I don't run any games my PC does power down after about 3-5 hours. Another fact that might be relevant: One time the PC did not shut down immediatly, instead first my graphics "powered down" but the music I was playing kept on playing. After about 20 seconds the pc powered down completely as usual. What I also noticed is that when I boot instantly after a power down, the chance of another power down occuring is much higher. Does anyone have an idea what could be causing this kind of behaviour or has a certain tool to diagnose the specific hardware parts? Thanks Specs: Memory: 6GB Processor: Intel i5 OS: Windows 7 64 bit The PC is a Dell Studio XPS 8100 with a replaced PSU and Graphics card: PSU: Corsair CX500 (500 watt) Graphics card: AMD Radeon 6850

    Read the article

  • Ok it has been pointed out to me

    - by Ratman21
    That it seems my blog is more of poor me or pity me or I deserve a job blog.   Hmmm I wont say, I have not wined here as I have used this blog to vent my frustration on the whole out of work thing (lack of money, self worth, family issues and the never end bills coming my way) but, it was also me trying to reach to others in the same boat as well as advertising, hay I am out here, employers.   It was also said, that I don’t have any thing listed here on me, like a cover letter or resume. Well there is but, it was so many months and post ago. Also what I had posted is not current. So here is my most current cover and resume.   Scott L Newman 45219 Dutton Way Callahan, Fl. 32011 To Whom It May Concern: I am really interested in the IT vacancie that you have listed for your company. Maybe I don’t have all the qualifications you want (hold on don’t hit delete yet) yet! But maybe I do, as I have over 20 + years experience in "IT” RIGHT NOW.   Read the rest of my cover and my resume. You will see what my “IT” skills are and it will Show that I can to this work! I can bring to your company along with my, can do attitude, a broad range of skills, including: Certified CompTIA A+, Security+  and Network+ Technician §         2.5 years (NOC) Network experience on large Cisco based Wan – UK to Austria §         20 years experience MIS/DP – Yes I can do IBM mainframes and Tandem  non-stops too §         18 years experience as technical Help Desk support – panicking users, no problem §         18 years experience with PC/Server based system, intranet and internet systems §         10+ years experienced on: Microsoft Office, Windows XP and Data Network Fundamentals (YES I do windows) §         Strong trouble shooting skills for software, hard ware and circuit issues (and I can tell you what kind of horrors I had to face on all of them). §         Very experienced on working with customers on problems – again panicking users, no problem §         Working experience with Remote Access (VPN/SecurID) – I didn’t just study them I worked on/with them §         Skilled in getting info for and creating documentation for Operation procedures (I don’t just wait for them to give it to me I go out and get it. Waiting for info on working applications is, well dumb) Multiple software languages (Hey I have done some programming) And much more experiences in “IT” (Mortgage, stocks and financial information systems experience and have worked “IT” in a hospital) Can multitask, also have ability to adapt to change and learn quickly. (once was put in charge of a system that I had not worked with for over two years. Talk about having to relearn and adapt to changes but, I did it.) I would welcome the opportunity to further discuss this position with you. If you have questions or would like to schedule an interview, please contact me by phone at 904-879-4880 or on my cell 352-356-0945 or by e-mail at [email protected] or leave a message on my web site (http://beingscottnewman.webs.com/). I have enclosed/attached my resume for your review and I look forward to hearing from you.   Thank you for taking a moment to consider my cover letter and resume. I appreciate how busy you are. Sincerely, Scott L. Newman    Scott L. Newman 45219 Dutton Way, Callahan, FL 32011? H (904)879-4880 C (352)356-0945 ? [email protected] Web - http://beingscottnewman.webs.com/                                                       ______                                                                                       OBJECTIVE To obtain a Network Operation or Helpdesk position.     PROFILE Information Technology Professional with 20+ years of experience. Volunteer website creator and back-up sound technician at True Faith Christian Fellowship. CompTIA A+, Network+ and Security+ Certified.   TECHNICAL AND PROFESSIONAL SKILLS   §         Technical Support §         Frame Relay §         Microsoft Office Suite §         Inventory Management §         ISDN §         Windows NT/98/XP §         Client/Vendor Relations §         CICS §         Cisco Routers/Switches §         Networking/Administration §         RPG §         Helpdesk §         Website Design/Dev./Management §         Assembler §         Visio §         Programming §         COBOL IV §               EDUCATION ? New HorizonsComputerLearningCenter, Jacksonville, Florida – CompTIA A+, Security+ and Network+ Certified.             Currently working on CCNA Certification ?MottCommunity College, Flint, Michigan – Associates Degree - Data Processing and General Education ? Currently studying Japanese     PROFESSIONAL             TrueFaithChristianFellowshipChurch – Callahan, FL, October 2009 – Present Web site Tech ·        Web site Creator/tech, back up song leader and back up sound technician. Note church web site is (http://ambassadorsforjesuschrist.webs.com/) U.S. Census (temp employee) Feb. 23 to March 8, 2010 ·        Enumerator for NassauCounty   ThomasCreekBaptistChurch – Callahan, FL,     June 2008 – September 2009 Churchsound and video technician      ·        sound and video technician           Fidelity National Information Services ? Jacksonville, FL ? February 01, 2005 to October 28, 2008 Client Server Dev/Analyst I ·        Monitored Multiple Debit Card sites, Check Authorization customers and the Card Auth system (AuthNet) for problems with the sites, connections, servers (on our LAN) and/or applications ·        Night (NOC) Network operator for a large Wide Area Network (WAN) ·        Monitored Multiple Check Authorization customers for problems with circuits, routers and applications ·        Resolved circuit and/or router issues or assist circuit carrier in resolving issue ·        Resolved application problems or assist application support in resolution ·        Liaison between customer and application support ·        Maintained and updated the NetOps Operation procedures Guide ·        Kept the listing of equipment on the raised floor updated ·        Involved in the training of all Night Check and Card server operation operators ·        FNIS acquired Certegy in 2005. Was one of 3 kept on.   Certegy ? St.Pete, FL ? August 31, 2003 to February 1, 2005 Senior NetOps Operator(FNIS acquired Certegy in 2005 all of above jobs/skills were same as listed in FNIS) ·        Converting Documentation to Adobe format ·        Sole trainer of day/night shift System Management Center operators (SMC) ·        Equifax spun off Card/Check Dept. as Certegy. Certegy terminated contract with EDS. One of six in the whole IT dept that was kept on.   EDS  (Certegy Account) ? St.Pete, FL ? July 1, 1999 to August 31, 2003 Senior NetOps Operator ·        Equifax outsourced the NetOps dept. to EDS in 1999. ·        Same job skills as listed above for FNIS.   Equifax ? St.Pete&Tampa, FL ? January 1, 1991 to July 1, 1999 NetOps/Tandem Operator ·        All of the above for FNIS, except for circuit and router issues ·        Operated, monitored and trouble shot Tandem mainframe and servers on LAN ·        Supported in the operation of the Print, Tape and Microfiche rooms ·        Equifax acquired TelaCredit in 1991.   TelaCredit ? Tampa, FL ? June 28, 1989 to January 1, 1991 Tandem Operator ·        Operated and monitored Tandem Non-stop systems for Card and Check Auths ·        Operated multiple high-speed Laser printers and Microfiche printers ·        Mounted, filed and maintained 18 reel-to-reel mainframe tape drives, cartridges tape drives and tape library.

    Read the article

  • How to Tell If Your Computer is Overheating and What to Do About It

    - by Chris Hoffman
    Heat is a computer’s enemy. Computers are designed with heat dispersion and ventilation in mind so they don’t overheat. If too much heat builds up, your computer may become unstable or suddenly shut down. The CPU and graphics card produce much more heat when running demanding applications. If there’s a problem with your computer’s cooling system, an excess of heat could even physically damage its components. Is Your Computer Overheating? When using a typical computer in a typical way, you shouldn’t have to worry about overheating at all. However, if you’re encountering system instability issues like abrupt shut downs, blue screens, and freezes — especially while doing something demanding like playing PC games or encoding video — your computer may be overheating. This can happen for several reasons. Your computer’s case may be full of dust, a fan may have failed, something may be blocking your computer’s vents, or you may have a compact laptop that was never designed to run at maximum performance for hours on end. Monitoring Your Computer’s Temperature First, bear in mind that different CPUs and GPUs (graphics cards) have different optimal temperature ranges. Before getting too worried about a temperature, be sure to check your computer’s documentation — or its CPU or graphics card specifications — and ensure you know the temperature ranges your hardware can handle. You can monitor your computer’s temperatures in a variety of different ways. First, you may have a way to monitor temperature that is already built into your system. You can often view temperature values in your computer’s BIOS or UEFI settings screen. This allows you to quickly see your computer’s temperature if Windows freezes or blue screens on you — just boot the computer, enter the BIOS or UEFI screen, and check the temperatures displayed there. Note that not all BIOSes or UEFI screens will display this information, but it is very common. There are also programs that will display your computer’s temperature. Such programs just read the sensors inside your computer and show you the temperature value they report, so there are a wide variety of tools you can use for this, from the simple Speccy system information utility to an advanced tool like SpeedFan. HWMonitor also offer this feature, displaying a wide variety of sensor information. Be sure to look at your CPU and graphics card temperatures. You can also find other temperatures, such as the temperature of your hard drive, but these components will generally only overheat if it becomes extremely hot in the computer’s case. They shouldn’t generate too much heat on their own. If you think your computer may be overheating, don’t just glance as these sensors once and ignore them. Do something demanding with your computer, such as running a CPU burn-in test with Prime 95, playing a PC game, or running a graphical benchmark. Monitor the computer’s temperature while you do this, even checking a few hours later — does any component overheat after you push it hard for a while? Preventing Your Computer From Overheating If your computer is overheating, here are some things you can do about it: Dust Out Your Computer’s Case: Dust accumulates in desktop PC cases and even laptops over time, clogging fans and blocking air flow. This dust can cause ventilation problems, trapping heat and preventing your PC from cooling itself properly. Be sure to clean your computer’s case occasionally to prevent dust build-up. Unfortunately, it’s often more difficult to dust out overheating laptops. Ensure Proper Ventilation: Put the computer in a location where it can properly ventilate itself. If it’s a desktop, don’t push the case up against a wall so that the computer’s vents become blocked or leave it near a radiator or heating vent. If it’s a laptop, be careful to not block its air vents, particularly when doing something demanding. For example, putting a laptop down on a mattress, allowing it to sink in, and leaving it there can lead to overheating — especially if the laptop is doing something demanding and generating heat it can’t get rid of. Check if Fans Are Running: If you’re not sure why your computer started overheating, open its case and check that all the fans are running. It’s possible that a CPU, graphics card, or case fan failed or became unplugged, reducing air flow. Tune Up Heat Sinks: If your CPU is overheating, its heat sink may not be seated correctly or its thermal paste may be old. You may need to remove the heat sink and re-apply new thermal paste before reseating the heat sink properly. This tip applies more to tweakers, overclockers, and people who build their own PCs, especially if they may have made a mistake when originally applying the thermal paste. This is often much more difficult when it comes to laptops, which generally aren’t designed to be user-serviceable. That can lead to trouble if the laptop becomes filled with dust and needs to be cleaned out, especially if the laptop was never designed to be opened by users at all. Consult our guide to diagnosing and fixing an overheating laptop for help with cooling down a hot laptop. Overheating is a definite danger when overclocking your CPU or graphics card. Overclocking will cause your components to run hotter, and the additional heat will cause problems unless you can properly cool your components. If you’ve overclocked your hardware and it has started to overheat — well, throttle back the overclock! Image Credit: Vinni Malek on Flickr     

    Read the article

  • Creating SparseImages for Pivot

    - by John Conwell
    Learning how to programmatically make collections for Microsoft Live Labs Pivot has been a pretty interesting ride. There are very few examples out there, and the folks at MS Live Labs are often slow on any feedback.  But that is what Reflector is for, right? Well, I was creating these InfoCard images (similar to the Car images in the "New Cars" sample collection that that MS created for Pivot), and wanted to put a Tag Cloud into the info card.  The problem was the size of the tag cloud might vary in order for all the tags to fit into the tag cloud (often times being bigger than the info card itself).  This was because the varying word lengths and calculated font sizes. So, to fix this, I made the tag cloud its own separate image from the info card.  Then, I would create a sparse image out of the two images, where the tag cloud fit into a small section of the info card.  This would allow the user to see the info card, but then zoom into the tag cloud and see all the tags at a normal resolution.  Kind'a cool. But...I couldn't find one code example (not one!) of how to create a sparse image.  There is one page on the SeaDragon site (http://www.seadragon.com/developer/creating-content/deep-zoom-tools/) that gives over the API for creating images and collections, and it sparsely goes over how to create a sparse image, but unless you are familiar with the API already, the documentation doesn't help very much. The key is the Image.ViewportWidth and Image.ViewportOrigin properties of the image that is getting super imposed on the main image.  I'll walk through the code below.  I've setup a couple Point structs to represent the parent and sub image sizes, as well as where on the parent I want to position the sub image.  Next, create the parent image.  This is pretty straight forward.  Then I create the sub image.  Then I calculate several ratios; the height to width ratio of the sub image, the width ratio of the sub image to the parent image, the height ratio of the sub image to the parent image, then the X and Y coordinates on the parent image where I want the sub image to be placed represented as a ratio of the position to the parent image size. After all these ratios have been calculated, I use them to calculate the Image.ViewportWidth and Image.ViewportOrigin values, then pass the image objects into the SparseImageCreator and call Create. The key thing that was really missing from the API documentation page is that when setting up your sub images, everything is expressed in a ratio in relation to the main parent image.  If I had known this, it would have saved me a lot of trial and error time.  And how did I figure this out?  Reflector of course!  There is a tool called Deep Zoom Composer that came from MS Live Labs which can create a sparse image.  I just dug around the tool's code until I found the method that create sparse images.  But seriously...look at the API documentation from the SeaDragon size and look at the code below and tell me if the documentation would have helped you at all.  I don't think so!   public static void WriteDeepZoomSparseImage(string mainImagePath, string subImagePath, string destination) {     Point parentImageSize = new Point(720, 420);     Point subImageSize = new Point(490, 310);     Point subImageLocation = new Point(196, 17);     List<Image> images = new List<Image>();     //create main image     Image mainImage = new Image(mainImagePath);     mainImage.Size = parentImageSize;     images.Add(mainImage);     //create sub image     Image subImage = new Image(subImagePath);     double hwRatio = subImageSize.X/subImageSize.Y;            // height width ratio of the tag cloud     double nodeWidth = subImageSize.X/parentImageSize.X;        // sub image width to parent image width ratio     double nodeHeight = subImageSize.Y / parentImageSize.Y;    // sub image height to parent image height ratio     double nodeX = subImageLocation.X/parentImageSize.X;       //x cordinate position on parent / width of parent     double nodeY = subImageLocation.Y / parentImageSize.Y;     //y cordinate position on parent / height of parent     subImage.ViewportWidth = (nodeWidth < double.Epsilon) ? 1.0 : (1.0 / nodeWidth);     subImage.ViewportOrigin = new Point(         (nodeWidth < double.Epsilon) ? -1.0 : (-nodeX / nodeWidth),         (nodeHeight < double.Epsilon) ? -1.0 : ((-nodeY / nodeHeight) / hwRatio));     images.Add(subImage);     //create sparse image     SparseImageCreator creator = new SparseImageCreator();     creator.Create(images, destination); }

    Read the article

  • My computer freezes irregularly

    - by Manhim
    My computer started to freeze at irregular times for 3 weeks now. Please note that this question change with each things that i try. (For additional details) What happens My computer freezes, the video stops. (No graphic glitches, it just stops) Sound keeps playing up to some time (Usually 10-30 seconds) then stops playing. Sometimes, randomly, the screen on my G-15 keyboard flickers and I see caracters not at the right places. Usually happens for about 1-2 seconds and a bit before my computer freezes. I have to keep the power button pressed for 4 seconds to shut my computer down. I still hear my hard drives and fans working. Sometimes it works with no problems for a full day, some other times it just keeps freezing each time I restart my computer and I have to leave it for the rest of the day. Sometimes my mouse freezes for a fraction of a second (Like 0.01 to 0.2 seconds) quite randomly, usually before it freezes. No errors spotted by the "Action center" unlike when I had problems with my last video card on this system (Driver errors). My G-15 LCD screen also freezes. Sometimes my G-15 LCD screen flickers and caracters gets caried around temporary under heavy load. Now, most of the times, the BIOS hard disks boot order gets reversed for some reason and I have to put it to the right one and save each times I boot. (Might be unrelated, not sure, but it first started yesterday) Sometimes the BIOS doesn't detect my 750GB hard drive plugged in SATA1. What I did so far I have had similar problems in the past and I had changed my hard drive (It was faulty), so I tested my software RAID-0 array and it was faulty so I changed it. (I reinstalled Windows 7 with this part). I also tested with unplugging my secondary hard drive. My CPU was running at about 100 degree Celsius, I removed the dust between the fans and the heatsink and it's now between 45-55. I ran a CPU stress-test and it didn't freeze during the tests (using Prime95 on all cores) Ran a memory test (using memtest86+) for a single pass and there were no errors. Ran a GPU stress test with ati-tools and furmark and it didn't freeze during the tests. (No artefacts either) I had troubles with my graphic card when I got it, but I think that it got fixed with a driver update. I checked the voltages in my BIOS setup and they all seemed ok (±0.2 I think). I have ran on the computer without problems with Fedora 15 on an external hard drive (Appart that it couldn't load Gnome 3 and was reverting to Gnome 2, didn't want to install drivers since I use it on multiple computers) I used it to backup my files from the raid array to my 1TB hard drive for the reinstallation of Windows. (So the crashes only happenned on Windows) [The external hard drive is plugged directly on a SATA port] I contacted EVGA (My graphic card vendor) and pointed them on this question, I'm looking for an answer. Ran sensors on Fedora 15 and got this output: http://pastebin.com/0BHJnAvu Ran 6 short different CPU stress test on Fedora 15 (Haven't found any complete stress testers for Linux) and it didn't crash. Changed the thermal paste to some Artic Silver 5 for my CPU and stress tested the CPU, temperature was at 50 idle, then 64 highest and slowly went down to 62 during the test. Ran some stress testing with a temporary graphic card and it went ok. Ran furmark stress test with my original graphic card and it freezed again. GPU had a temp of 74C, a CPU temp of 58C and a mobo temp of 40C or 45C (Dunno which one it is from SpeedFan). Ran a furmark stress test and a CPU stress test at the same time, results: http://pastebin.com/2t6PLpdJ I have been using my computer without stressing it for about 2 hours now and no crashes yet. I also have disabled the AMD Cool'n'quiet function on the BIOS for a more regular power to the CPU. When I ran Furmark without C'n'q my computer didn't freeze but I had a "Driver Kernel Error" that have recovered (And Furmark crashed) all that while running a CPU stress test. The computer eventually frozed without me being at it, but this time my screen just went on sleep and I couldn't wake it. Using the stability tester in nTune my computer freezed again (In the same manner as before). I notived that Speedfan gives me a -12V of -16.97V and a -5V of -8.78V. I wonder if these numbers are reliable and if they are good or bad. I have swapped my G-15 with another basic USB keyboard (HP) and I have ran furmark for about 10 minutes with a CPU stability test running each 60 seconds for 30 seconds and my computer haven't crashed yet. Ran some more extended tests without my G-15 and it freezed like it usually do. Removed the nForce Hard disk controler. Disabled command queuing in the NVIDIA nForce SATA Controller for both port 0 and port 1 (Errors from the logs) Used CPUID HwMonitor, here are the voltages: http://pastebin.com/dfM7p4jV Changed some configurations in the motherboard BIOS: Disabled PEG Link Mode, Changed AI Tuning to Standard, Disabled the 1394 Controller, Disabled HD Audio, Disabled JMicron RAID controller and Disabled SATA Raid. When it happens When I play video games (Mostly) When I play flash games (Second most) When I'm looking at my desktop background (It rarely happens when I have a window open, but it does, sometimes) When my Graphic card and my CPU are stressed. Sometimes when my Graphic card is stressed. Never happenned while stressing only the CPU. Sometimes when my CPU is stressed. Specs Windows Seven x64 Home Premium Motherboard: M2N-SLI Deluxe CPU: AMD Phenom 9950 x2 @ 2.6GHz Memory: Kingston 4x2GB Dual Channel (Pretty basic memory sticks) Hard drives: Was 2x250GB (Western digital caviar) in raid-0 + 1TB (WD caviar black), I replaced the raid array with a 750GB (WD caviar black) [Yes I removed the array from the raid configurations] 750W Power supply No overcloking. Ever. There have been some power-downs like 4-5 weeks ago, but the problem didn't start immediately after. (I wasn't home, so my computer got shut-down) Event logs (Warnings, errors and critical errors) for the last 24 hours: http://pastebin.com/Bvvk31T7 My current to-try list Reinstall the drivers and software 1 by 1 and do extensive stress testing between each. Update the BIOS firmware to the most recent stable one. Change my motherboard. Status updates Keeping only the last 3 (28/06 04pm) More stress testing and still pass the tests. (28/06 03pm) Been stress testing for 10 minute straight now and 5 minutes with both CPU and GPU being stressed at the same time. (28/06 03pm) Stress-testing right now, so far no problems. A little hope Tests with Furmark and Prime95. Testing Windows bare-bone: 30 Minutes stress, no freeze. Installing an Anti-virus and some software, restarting computer. Testing with Anti-virus and some software (No drivers installed): 30 Minutes stress, no freeze. Installing audio drivers, restarting computer. Testing with the audio drivers: 30 Minutes stress, no freeze. Installing the latest graphic drivers from EVGA's website (without 3d vision since I don't use it), restarting computer. Testing with the graphic drivers: 30 Minutes stress, no freeze. Configuring Windows to my liking and installing more softwares. In this situation, how can I successfully pin-point the current hardware problem? (If it's a hardware problem) Because I don't really have the budget to just forget and replace everything. I also don't really have hardware to test-replace current hardware.

    Read the article

  • 3 Monitors powered from a Nvidia fx580

    - by user26067
    I have a NVidia FX580 card in a Dell Precision T1500. The outputs of the back of the card are DVI and 2x displayport. I tried to run 3 screens from the DVI + 2x displayport to dvi adaptors, but the card won't have it... It'll only run 2 of these screens at the same time. http://www.nvidia.com/object/product_quadro_fx_580_us.html says; **Display Support:** Dual Link DVI-I 1 DisplayPort 2 # of Digital Outputs 3 ( 2 out of 3 active at a time ) # of Analog Outputs 1 To me this reads that it will be able to power 2xdvi monitors and 1xvga monitor. Anyone care to confirm or speculate?

    Read the article

  • Assistance in setting up new APC Smart-UPS RT on a new VMware enviroment

    - by user38085
    I'm new to the realm of setting up a APC Smart-UPS RT 8000VA UPS with a management network card (AP9618). The project calls for the upgrade of the firmware for the network card to the newest and greatest. It also calls for the Powerchute Business Software to be installed with notifications setup per email for temperature, shutdown, and battery low. I know I'll have to use the serial cable to flash the firmware and install the software on one server 2003 box. Also on that server I'll have to install the software and setup the GUI (IP address) interface. Whats confusing the most is the whole process, and steps to use without taking down the network, which would be very bad. In flashing the firmware does it take down the UPS? Do i have to run BOOTP commands to setup the network card? Also no agents will be used on any of the VWware OS's and no SNMP trap will be used.

    Read the article

  • How to copy lots of files between two computers, without network?

    - by Steve Bennett
    I want to copy around 50Gb of files from my desktop to my work laptop. For some reason, the laptop won't connect to my home network. I haven't had any luck with a direct ethernet connection either, and I'm not willing to change any of the laptop's network configuration (last time I did that, I couldn't get onto the network at work, making me Not Very Popular). So...what else is there? The obvious route is copying via SD card. My largest card is 8Gb. But I can't find a good workflow. Is there a tool designed for this, where I could just repetitively move the card back and forth, without having to select files? I've tried using teracopy, but you end up missing a few files. I guess I could zip everything up into multi-volume .rars or something...but is there a more elegant way?

    Read the article

  • Setting up a wireless network with Verizon MiFi

    - by winarm
    I am trying to set up a home network. I live in a location without cable internet so I have a Verizon MiFi card. I have a few laptops at the moment and they each connect through the card but I want to set up an Ubuntu 10.10 server and see if I can use it for DHCP. I have a Trendnet TEG-S50G switch and the computer I plan to use for the server has a Linksys WMP-11 Wireless PCI card. Is there any other equipment I need in order to get this to work? Is this even doable? Is there a better way to make this happen?

    Read the article

  • Revocation status of DC can't be verified

    - by DotGeorge
    A Domain Controller within my forest was working fine (as the story usually goes). Then, suddenly, I can't logon with my smart card. Instead, I'm greeted with the following message: The system could not log you on. The revocation status of the domain controller certificate used for smart card authentication could not be determined. I literally have no idea what's happened here. As an attempted quick fix, I removed the root certificate which issued the Smart Card's certificate from the CA of both the client and DC. Then imported a newly exported one from the DC in question. Same issue. I've spotted a number of related articles on Microsoft's forums and a HP support document. Each don't really shed much light as it's a generic error message apparently. Having said all of this, other smart cards (issued from other DCs) work fine. So I have no idea what's up with this one.

    Read the article

  • Core Audio sound driver has an error

    - by Raj More
    I have been using Virtual DJ on my machine. The setup is where I want audio to play over the headphones and use a USB sound card to play audio into my headphones so I can listen to music before I play it for everybody. However, the last time I tried, I got an error message saying "Error in the sound driver of Core Audio. Your sound card is probably not connected, or the settings are incorrect". If I use the headphone by themselves, the USB sound card by itself, or my speakers by themselves, they all work individually. How do I go about figuring out what's wrong here?

    Read the article

  • How to get AMD Catalyst working on Arch x86_64

    - by gh403
    I've got a Dell Inspiron 15R 7520 with AMD's hybrid "PowerXpress" graphics. The integrated graphics card is (if I understand it correctly) integrated with the i7-3612QM processor, and the discrete graphics card is a "Southern Islands" Radeon HD 7730M. The integrated graphics work perfectly under Arch. However, the discrete graphics don't. I have tried several different methods, and the one that seems to get me the farthest with the least effort is the AUR package catalyst-total-pxp. After installing, rebooting, and issuing the commands # aticonfig --initial # pxp_switch_catalyst amd # X X completely fails to start. The X log can be found here. I don't understand what is failing; potentially, it has something to do with the way my card is hooked up--I think it's muxless, but I really don't know. What is the matter here? Any help would be appreciated.

    Read the article

  • ifconfig return "unknown interface: no such device"

    - by xolstice
    I'm trying to install a Linux driver for my wireless network card (D-Link DWL-G510) on my Red Hat Linux 7.1 machine with a 2.4.37.9 kernel. I downloaded the serial monkey driver from the sourceforge site and was able to successfully compile the rt73 module and load it into the kernel. The problem now is that everytime I issue the command ifconfig wlan0 up it keeps returning with the following error message: wlan0: unknown interface: No such device. I'm at a loss as to what to do here. I specifed wlan0 as the alias for the rt73 module in the modules.conf and also tried to load the driver with the command modprobe rt73 ifname=wlan0 (this specifies the interface name according to the instructions packaged in the driver), but the error message still keeps coming up. Is there something else I need to do in Linux to configure the wlan0 part or is the module not recognizing the wireless network card? It would be quite strange if it is the later since all information from the Internet is indicating this is the linux driver I should be using for mentioned wireless card.

    Read the article

  • Two NIC cards with the same metric - Internet traffic going out the wrong one

    - by bvanderw
    I have two NIC cards in my computer - one is connected to our corporate network and the Internet, the other is connected to a private LAN through a Linksys WRT54G. Both cards use DHCP. This was never an issue with Windows XP, but with Windows Vista (and Windows 7) the metric for the 0.0.0.0 route is the same (20), and it appears that some network traffic that should go out my main network card are going out my secondary card instead. The solution to date is to delete the 0.0.0.0 route associated with the second NIC card, but I have to do this several times a day. Is there a better solution? --Bruce

    Read the article

  • cloning mac address of physical server converted into vmware server

    - by user24981
    We've recently converted a physical Windows Server 2003 into vmware using P2V. However, one of the pieces of software on the 2003 machine are still looking for the old server's network MAC address in order to run. I've read several articles where it's discussed that you can modify the last part of the generated address and set it to static, but I need to clone the whole mac address to mimic the one in the old server. We're running CentOS and VMware server 2.0 as the host system. I was told that maybe adding in a second network card in the host and setting the virtual system's nic to that card instead of "bridged" would allow me to edit the vmx file and clone the whole MAC address. I can't use the old network card from the physical server because it's ISA and our new bus is PCI Any ideas? Thanks, Mike

    Read the article

  • How to set up RAID 1 on Dell PERC S300 With Existing OS Install

    - by Daniel Dugger
    We have a server that is being used in production, but it was not originally meant to. The main thing I want to add to it is a Dell PERC S300 RAID Card to have the main hard drive (Windows Server 2008 R2) mirrored on another hard drive. I can not initialize the disk and wipe the the OS to create the array and then re-install. Is there a way to create the array with a current hard drive, without affecting it, and just mirroring the drive? If that card is not an option, is there a card that would allow that? The server is a Dell PowerEdge T110 II.

    Read the article

  • Programmatically get the WLAN config of a machine and use netsh to setup new profile

    - by Maestro1024
    How can I programmatically get the wireless LAN configuration of a machine and use netsh to setup new profile? I am having trouble getting the netsh command to set the ssid of a new card. I installed the drivers and plugged it in. I see in ipconfig it says the "media is disconnected" (fair enough). I then send the following command netsh wlan connect name=profile1 ssid=myNetwork interface="Wireless Network Connection 2" problem is I get an error "There is no profile "profile1" assigned to the specified interface. What is a profile for a wireless card? What should I set it to? How can I get my SSID set and connected for the card?

    Read the article

  • GTA 4 crashes (WIN7 64-bit)

    - by Damian
    Hi! I got those two errors when I'm trying to run GTA4: Opis: Critical runtime problem Podpis problemu: Nazwa zdarzenia problemu: APPLICATION CRASH System RAM: -1 Available RAM: -532590592 Number of CPUs: 4 Video Card Manufacturer: NVIDIA Video Card Description: NVIDIA GeForce 9800 GT Video Card Driver Version: 8.17.0012.5919 Wersja systemu operacyjnego: 6.1.7600.2.0.0.256.1 Identyfikator ustawien regionalnych: 1045 And the second error: Podpis problemu: Nazwa zdarzenia problemu: BEX Nazwa aplikacji: GTAIV.exe Wersja aplikacji: 1.0.7.0 Sygnatura czasowa aplikacji: 4bd9efbe Nazwa modulu z bledem: StackHash_fea7 Wersja modulu z bledem: 0.0.0.0 Sygnatura czasowa modulu z bledem: 00000000 Przesuniecie wyjatku: 0000b513 Kod wyjatku: c0000005 Dane wyjatku: 00000008 Wersja systemu operacyjnego: 6.1.7600.2.0.0.256.1 Identyfikator ustawien regionalnych: 1045 Dodatkowe informacje 1: fea7 Dodatkowe informacje 2: fea78afc140967119290cc27385e0510 Dodatkowe informacje 3: 20ce Dodatkowe informacje 4: 20ce3e492a2aa7e5b8cfe9b7b1f05b42 My PC spec: Proc: Intel i5 (4x2,66ghz) ;RAM: 8GB DDR3 1066mhz ;Graphics: ASUS EN9800GT/DI/1GD3 ;OS: WINDOWS 7 64-bit I think it should work well on my PC, I couldn't find the solution to get it working so I hope You can help me. P.S. Sorry for my English - I'm from Poland.

    Read the article

< Previous Page | 62 63 64 65 66 67 68 69 70 71 72 73  | Next Page >