Search Results

Search found 24106 results on 965 pages for 'usb key'.

Page 66/965 | < Previous Page | 62 63 64 65 66 67 68 69 70 71 72 73  | Next Page >

  • How do I mount my Android phone?

    - by Amanda
    I'm puzzled because my phone used to just appear when I plugged it in. It doesn't anymore and The development options are definitely set to allow USB debugging. The phone is charging via USB but doesn't appear in lsusb [0 amanda@luna android-sdk-linux_86]$ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 004: ID 17ef:4807 Lenovo UVC Camera Bus 003 Device 012: ID 413c:1003 Dell Computer Corp. Keyboard Hub Bus 003 Device 003: ID 08ff:2810 AuthenTec, Inc. AES2810 Bus 003 Device 013: ID 413c:2010 Dell Computer Corp. Keyboard Bus 003 Device 014: ID 046d:c001 Logitech, Inc. N48/M-BB48 [FirstMouse Plus] adb devices -l shows nothing. In my Wireless and Network settings I changed the USB connection settings to "Mass storage" -- they were set to "Ask on connection" though I definitely wasn't getting asked. I don't get any Click here to connect via USB alert either. I'm not even sure whether the issue is my phone or my computer. It seems odd that it isn't even appearing in lsusb Not for nothing, the thumb drive on my keyring also does not appear in lsusb -- I've tried both in a bunch of different ports. I kind of assume the thumb drive is just borked, but it could be my OS.

    Read the article

  • SDcardReader/Writer is not connected

    - by Insuk
    My IOGEAR sdCardReader/Writer is recongized on Ubutu(by using VM ware) but when I tried to connect to "Removable Devices - Alcor Micro Flash Card Reader/Writer" , the follwoing message is appeared. " The connection for the USB device "Alcor Micro Flash Card Reader/Writer" was unsuccessful. The device is currently in use. " But I think it is not used. Should I use IOGEAR driver for this one? When I connect the card reader, Ubuntu automatically got the "Alcor Micro Flash Card Reader/Writer" . How can I fix the problem? Thank you, Insuk the result of lsusb: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 0b95:7720 ASIX Electronics Corp. AX88772 Bus 002 Device 002: ID 0e0f:0003 VMware, Inc. Virtual Mouse Bus 002 Device 003: ID 0e0f:0002 VMware, Inc. Virtual USB Hub Bus 002 Device 004: ID 0e0f:0008 VMware, Inc. Bus 002 Device 005: ID 0403:bcda Future Technology Devices International, Ltd From the vmware log : 2013-10-18T09:00:07.494-06:00| vmx| I120: USB-CCID: Could not establish context: SCARD_E_NO_SERVICE(0x8010001d). 2013-10-18T09:00:07.494-06:00| vmx| I120: USB-CCID: Could not establish context: SCARD_E_NO_SERVICE(0x8010001d).

    Read the article

  • PC shuts down when installing ubuntu?

    - by Robin002
    I'm now using ubuntu from USB, and I'd like to install ubuntu on my hard disk. I tried the option of removing Vista while installing ubuntu. However, near the end of the installation process (presumably the end because I can see some slideshows on how to start using ubuntu), the screen suddenly goes to black with white words running around on it. Soon the computer shuts down. After that, restarting leads to a black screen with only a small white cursor on the top left corner. The cursor keeps blinking and nothing happens. I found that I can alternatively choose to boot with USB by hitting F12 just when the computer starts. So I tried to reinstall ubuntu by running ubuntu on USB. One of the options of installation is to update ubuntu 11.04 to ubuntu 11.04, so it seems the ubuntu is already installed somehow. Anyways, I tried both update and delete and install option but the same thing happens as the 1st time (sometimes before reaching the end), while I still cannot start my PC as ubuntu (without USB). How may I install ubuntu properly?

    Read the article

  • ubuntu 13.10 liveboot/installer loads dots, then does nothing

    - by user200245
    Problem: When I load an Ubuntu 13.10 (64-bit) live USB / installer on my laptop, the purple Ubuntu screen with the white dots appears, the dots turn orange (indicating its loading), then after a few seconds the screen turns completely black and nothing else happens. I can not install Ubuntu 13.10 on this computer. What I've Tried: I've re-downloaded the .iso file from canonical. I've burned the .iso to the USB using the default linux usb image writer, and the Windows programs YUMI and Linux Live USB Creator; same thing happens each time. Yes, I'm sure my computer is 64 bit. I'm currently running Linux Mint 15 on it, which runs perfectly. It's a Sager NP7330 / Clevo w230st. extra info A few months I installed Ubuntu 13.04 on this machine, which installed perfectly. Normally I'd install that then dist-upgrade to 13.10, HOWEVER this computer is only a few months old and the wireless/network drivers for my network card were not implemented until kernel 3.11 (which comes w ith 13.10). I tried manually downloading kernel 3.11 and installing it (on 13.04), however the wireless card nor ethernet card still did work with Ubuntu 13.04. So my only real hope is to get 13.10 working. Does anyone know what's up with this?

    Read the article

  • Capturing Alt+PrintScreen hot key and clipboard contents

    - by kusanagi
    I setup catching hotkey on alt+printscreen. It catches perfectly but there is nothing in the buffer - no image. How can I get the image from Clipboard.GetImage() after catching hotkey? Here is the the code. using System; using System.Runtime.InteropServices; using System.Collections.Generic; using System.ComponentModel; using System.Data; using System.Drawing; using System.Text; using System.Windows.Forms; namespace Magic_Screenshot { public enum ModifierKey : uint { MOD_NULL = 0x0000, MOD_ALT = 0x0001, MOD_CONTROL = 0x0002, MOD_SHIFT = 0x0004, MOD_WIN = 0x0008, } public enum HotKey { PrintScreen, ALT_PrintScreen, CONTROL_PrintScreen } public class HotKeyHelper : IMessageFilter { const string MSG_REGISTERED = "??????? ??????? ??? ????????????????, ???????? UnRegister ??? ?????? ???????????."; const string MSG_UNREGISTERED = "??????? ??????? ?? ????????????????, ???????? Register ??? ???????????."; //?????? ?? ?????? ?????? singleton public HotKeyHelper() { } //public static readonly HotKeyHelper Instance = new HotKeyHelper(); public bool isRegistered; ushort atom; //ushort atom1; ModifierKey modifiers; Keys keyCode; public void Register(ModifierKey modifiers, Keys keyCode) { //??? ???????? ??? ????? ????? ? PreFilterMessage this.modifiers = modifiers; this.keyCode = keyCode; //?? ????????? ?? ??? ???????????? //if (isRegistered) // throw new InvalidOperationException(MSG_REGISTERED); //????????? atom, ??? ??????????? ?????? ??????????? atom = GlobalAddAtom(Guid.NewGuid().ToString()); //atom1 = GlobalAddAtom(Guid.NewGuid().ToString()); if (atom == 0) ThrowWin32Exception(); if (!RegisterHotKey(IntPtr.Zero, atom, modifiers, keyCode)) ThrowWin32Exception(); //if (!RegisterHotKey(IntPtr.Zero, atom1, ModifierKey.MOD_CONTROL, Keys.PrintScreen)) // ThrowWin32Exception(); //????????? ???? ? ??????? ???????? ????????? Application.AddMessageFilter(this); isRegistered = true; } public void UnRegister() { //?? ???????? ?? ??? ???????????? if (!isRegistered) throw new InvalidOperationException(MSG_UNREGISTERED); if (!UnregisterHotKey(IntPtr.Zero, atom)) ThrowWin32Exception(); GlobalDeleteAtom(atom); //??????? ???? ?? ??????? ???????? ????????? Application.RemoveMessageFilter(this); isRegistered = false; } //?????????? Win32Exception ? ????? ?? ????????? ????? ????????????? Win32 ??????? void ThrowWin32Exception() { throw new Win32Exception(Marshal.GetLastWin32Error()); } //???????, ???????????? ??? ??????????? ??????? HotKeys public event HotKeyHelperDelegate HotKeyPressed; public bool PreFilterMessage(ref Message m) { //???????? ?? ????????? WM_HOTKEY if (m.Msg == WM_HOTKEY && //???????? ?? ???? m.HWnd == IntPtr.Zero && //???????? virtual key code m.LParam.ToInt32() >> 16 == (int)keyCode && //???????? ?????? ????????????? (m.LParam.ToInt32() & 0x0000FFFF) == (int)modifiers && //???????? ?? ??????? ??????????? ????????? HotKeyPressed != null) { if ((m.LParam.ToInt32() & 0x0000FFFF) == (int)ModifierKey.MOD_CONTROL && (m.LParam.ToInt32() >> 16 == (int)Keys.PrintScreen)) { HotKeyPressed(this, EventArgs.Empty, HotKey.CONTROL_PrintScreen); } else if ((m.LParam.ToInt32() & 0x0000FFFF) == (int)ModifierKey.MOD_ALT && (m.LParam.ToInt32() >> 16 == (int)Keys.PrintScreen)) { HotKeyPressed(this, EventArgs.Empty, HotKey.ALT_PrintScreen); } else if (m.LParam.ToInt32() >> 16 == (int)Keys.PrintScreen) { HotKeyPressed(this, EventArgs.Empty, HotKey.PrintScreen); } } return false; } //??????????? Win32 ????????? ? ??????? const string USER32_DLL = "User32.dll"; const string KERNEL32_DLL = "Kernel32.dll"; const int WM_HOTKEY = 0x0312; [DllImport(USER32_DLL, SetLastError = true)] static extern bool RegisterHotKey(IntPtr hWnd, int id, ModifierKey fsModifiers, Keys vk); [DllImport(USER32_DLL, SetLastError = true)] static extern bool UnregisterHotKey(IntPtr hWnd, int id); [DllImport(KERNEL32_DLL, SetLastError = true)] static extern ushort GlobalAddAtom(string lpString); [DllImport(KERNEL32_DLL)] static extern ushort GlobalDeleteAtom(ushort nAtom); } } Where is the bug?

    Read the article

  • How to change CapsLock key to produce "a"?

    - by Pit
    While typing I often hit the CapsLock key instead of the a key. (QWERTZU keyboard) This is quite annoying because the moment I realise that I hit the wrong key, I will have to delete multiple character/lines of text an rewrite them in the right form. I am searching for a way to prevent this. I have found a possibility to disable the CapsLock key in Keyboard Layout Options. But this would in my case mean that instead of writing an a I would write nothing. Positive - I don't have to rewrite a whole line, but only one character Negative - It's not that obvious that I hit the wrong key, as a missing character is not perceivable as an upper-case line of text. I would therefore prefer a possibility to map CapsLock to a . Thus when hitting CapsLock an a character would be written. Positive - If I hit CapsLock instead of a I get the output I actually wanted to type. Negative - If I hit CapsLock in any other context I will get an a character. As I don't ever intentionally use the CapsLock key this would not really pose a problem. (I think, or does it?) My Question: So how do I change to a ? And is there any case where this could be dangerous/provoke unwanted behaviour?

    Read the article

  • Old Lock Retrofitted for Wireless and Key-free Entry

    - by Jason Fitzpatrick
    What do you do if the old key your landlord gave you is poor fit for your apartment’s lock? If you’re the geeky sort, you build a wireless unlocking module to do the work for you. Instructables user Rybitski writes: The key to my apartment never worked quite right because it is a copy of a copy of a copy. I am fairly certain that the dead bolt is original to the building and the property manager seems to have lost the original key years ago. As a result unlocking the door was always a pain. Changing the lock wasn’t an option, but eliminating the need to use a key was. To that end, he built the device seen in the video above. An Arduino Uno drives a servo which in turn opens the deadbolt. The whole thing is controlled by a simple wireless key fob. Hit up the link below for the full build guide including code. Key Fob Deadbolt [via Hack A Day] How To Delete, Move, or Rename Locked Files in Windows HTG Explains: Why Screen Savers Are No Longer Necessary 6 Ways Windows 8 Is More Secure Than Windows 7

    Read the article

  • Pantech Link II, Ubuntu and Virtual XP

    - by user85041
    Okay this is my problem. I have a Pantech Link II, dmesg states: [ 896.072037] usb 2-3: new high-speed USB device number 3 using ehci_hcd [ 896.258562] cdc_acm 2-3:1.0: ttyACM0: USB ACM device [ 896.260039] usbcore: registered new interface driver cdc_acm [ 896.260042] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters Have it installed through wine (pc suite and driver) and it doesn't see it. Virtual XP through VMWare Player sees my device, knows it needs a driver. The removable devices says Curitel Pantech USB Device (Maybe Driver). I have PC Suite installed in XP, I install the driver through the executable.. it says problem with installing hardware, and then it disappears. Ubuntu sees it after restart, but if I start XP with that driver installed, it disappears from both and I get these errors in dmesg: [ 1047.760555] /dev/vmmon[2882]: PTSC: initialized at 3093322000 Hz using TSC, TSCs are synchronized. [ 1048.174033] /dev/vmmon[2882]: Monitor IPI vector: 0 [ 1055.293060] /dev/vmnet: open called by PID 3163 (vmx-vcpu-0) [ 1055.293074] /dev/vmnet: port on hub 8 successfully opened [ 1055.293088] /dev/vmnet: open called by PID 3163 (vmx-vcpu-0) [ 1055.293094] /dev/vmnet: port on hub 8 successfully opened [ 1072.446305] /dev/vmnet: open called by PID 3163 (vmx-vcpu-0) [ 1072.446316] /dev/vmnet: port on hub 8 successfully opened [ 1072.446328] /dev/vmnet: open called by PID 3163 (vmx-vcpu-0) [ 1072.446334] /dev/vmnet: port on hub 8 successfully opened [ 1072.856024] usb 1-1: reset high-speed USB device number 2 using ehci_hcd [ 1079.292024] usb 1-1: reset high-speed USB device number 2 using ehci_hcd [ 1079.732024] usb 1-1: reset high-speed USB device number 2 using ehci_hcd [ 1127.743034] NET: Registered protocol family 39 [ 1127.749320] [3163]: VMCI: IOCTL_VMCI_QUEUEPAIR_ALLOC (cid=1522210225,result=4). [ 1144.104031] usb 2-3: reset high-speed USB device number 3 using ehci_hcd [ 1144.412031] usb 2-3: reset high-speed USB device number 3 using ehci_hcd [ 1155.889976] ehci_hcd 0000:00:13.2: force halt; handshake ffffc90000642024 00004000 00000000 -> -110 [ 1155.889980] ehci_hcd 0000:00:13.2: HC died; cleaning up [ 1155.890008] usb 2-3: USB disconnect, device number 3 [ 1155.890013] usb 2-3: usbfs: usb_submit_urb returned -110 [ 1658.310777] [3163]: VMCI: IOCTL_VMCI_QUEUEPAIR_DETACH (cid=1522210225,result=3). [ 1658.392018] NET: Unregistered protocol family 39 [ 1666.546438] /dev/vmnet: open called by PID 3163 (vmx-vcpu-0) [ 1666.546450] /dev/vmnet: port on hub 8 successfully opened [ 1666.546462] /dev/vmnet: open called by PID 3163 (vmx-vcpu-0) [ 1666.546467] /dev/vmnet: port on hub 8 successfully opened [ 1671.431383] uvcvideo: Found UVC 1.00 device USB2.0 Camera (1871:0101) [ 1671.432533] input: USB2.0 Camera as /devices/pci0000:00/0000:00:12.2/usb1/1-1/1-1:1.0/input/input13 lessa@X:~$ dmesg|tail [ 1155.890008] usb 2-3: USB disconnect, device number 3 [ 1155.890013] usb 2-3: usbfs: usb_submit_urb returned -110 [ 1658.310777] [3163]: VMCI: IOCTL_VMCI_QUEUEPAIR_DETACH (cid=1522210225,result=3). [ 1658.392018] NET: Unregistered protocol family 39 [ 1666.546438] /dev/vmnet: open called by PID 3163 (vmx-vcpu-0) [ 1666.546450] /dev/vmnet: port on hub 8 successfully opened [ 1666.546462] /dev/vmnet: open called by PID 3163 (vmx-vcpu-0) [ 1666.546467] /dev/vmnet: port on hub 8 successfully opened [ 1671.431383] uvcvideo: Found UVC 1.00 device USB2.0 Camera (1871:0101) [ 1671.432533] input: USB2.0 Camera as /devices/pci0000:00/0000:00:12.2/usb1/1-1/1-1:1.0/input/input13 I have tried uninstalling, and installing manually from the device manager update driver while it's still has the warning sign.. it doesn't see the drivers as valid. No idea how to fix this.. would prefer to not have to go to another computer. I'm not trying to do anything but get the pictures off of it. I have to restart ubuntu, plug in device, for ubuntu to see it correctly again. I am like a month and a half old linux newbie so I have no idea the commands I could use for this, and I don't have a memory card in the phone to mount.

    Read the article

  • cannot boot ubuntu 13.10 with my usb, Can i change the kernal on my laptop to run it?

    - by Carlos Dunick
    Currently i am running 12.04 and looking for an upgrade to 13.10 I first tried a bootable 64bit usb and failed. With the message saying "Kernal requires an x86-64 CPU but only detected an I686 CPU Unable to boot please use a kernal appropriate for your CPU" then tried 32bit and same message came up. Is this due to my laptop simply being to slow? or can/should i change the kernal somehow? Acer Aspire 5710z Intel Pentium dual core processor, 1.73Ghz, 533 MHz FSB, 1 MB L2 cache. 2GB DDR2 lspci 00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03) 00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03) 00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03) 00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 02) 00:1c.2 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 3 (rev 02) 00:1c.3 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 4 (rev 02) 00:1d.0 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 (rev 02) 00:1d.1 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 (rev 02) 00:1d.2 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 (rev 02) 00:1d.3 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 (rev 02) 00:1d.7 USB controller: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) 00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02) 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 02) 00:1f.2 SATA controller: Intel Corporation 82801GBM/GHM (ICH7-M Family) SATA Controller [AHCI mode] (rev 02) 00:1f.3 SMBus: Intel Corporation NM10/ICH7 Family SMBus Controller (rev 02) 04:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5787M Gigabit Ethernet PCI Express (rev 02) 05:00.0 Network controller: Broadcom Corporation BCM4311 802.11b/g WLAN (rev 01) 06:00.0 FLASH memory: ENE Technology Inc ENE PCI Memory Stick Card Reader Controller 06:00.1 SD Host controller: ENE Technology Inc ENE PCI SmartMedia / xD Card Reader Controller 06:00.2 FLASH memory: ENE Technology Inc Memory Stick Card Reader Controller 06:00.3 FLASH memory: ENE Technology Inc ENE PCI Secure Digital / MMC Card Reader Controller

    Read the article

  • How can I duplicate a SQL Server symmetric key?

    - by rlb.usa
    We have a server with a database that has a symmetric key (Database - Security - Symmetric Key). We have a backup duplicate databases that we are using as a test databases, but we don't have this key in there. How can I duplicate this symmetric key (or make a new one exactly like the old) and put it in the existing databases? It has to have the same value and key-name as the other one. This is on SQL Server 2008.

    Read the article

  • Poll Results: Foreign Key Constraints

    - by Darren Gosbell
    A few weeks ago I did the following post asking people – if they used foreign key constraints in their star schemas. The poll is still open if you are interested in adding to it, but here is what the chart looks like as of today. (at the bottom of the poll itself there is a link to the live results, unfortunately I cannot link the live results in here as the blogging platform blocks the required javascript)   Interestingly the results are fairly even. Of the 78 respondents, fractionally over half at least aim to start with referential integrity in their star schemas. I did not want to influence the results by sharing my opinion, but my personal preference is to always aim to have foreign key constraints. But at the same time, I am pragmatic about it, I do have projects where for various reasons some constraints are not defined. And I also have other designs that I have inherited, where it would just be too much work to go back and add foreign key constraints. If you are going to implement foreign keys in your star schema, they really need to be there at the start. In fact this poll was was the result of a feature request for BIDSHelper asking for a feature to check for null/missing foreign keys and I am entirely convinced that BIDS is the wrong place for this sort of functionality. BIDS is a design tool, your data needs to be constantly checked for consistency. It's not that I think that it's impossible to get a design working without foreign key constraints, but I like the idea of failing as soon as possible if there is an error and enforcing foreign key constraints lets me "fail early" if there are constancy issues with my data. By far the biggest concern with foreign keys is performance and I suppose I'm curious as to how often people actually measure and quantify this. I worked on a project a number of years ago that had very large data volumes and we did find that foreign key constraints did have a measurable impact, but what we did was to disable the constraints before loading the data, then enabled and checked them afterwards. This saved as time (although not as much as not having constraints at all), but still let us know early in the process if there were any consistency issues. For the people that do not have consistent data, if you have ETL processes that you control that are building your star schema which you also control, then to be blunt you only have yourself to blame. It is the job of the ETL process to make the data consistent. There are techniques for handling situations like missing data as well as  early and late arriving data. Ralph Kimball's book – The Data Warehouse Toolkit goes through some design patterns for handling data consistency. Having foreign key relationships can also help the relational engine to optimize queries as noted in this recent blog post by Boyan Penev

    Read the article

  • Filezilla/Puttygen doesn't recognize private key file

    - by devzoner
    I have generated a key for an Ubuntu Virtual Machine running on Azure Cloud Services http://www.windowsazure.com/en-us/manage/linux/how-to-guides/ssh-into-linux/ openssl req -x509 -nodes -days 365 -newkey rsa:2048 -keyout myPrivateKey.key -out myCert.pem When loading the private key into Filezilla, it asks me to convert the format, however, when converting the key it fails, the same happens with puttygen from linux console, using this: puttygen myPrivateKey.key -o myKey.ppk In both cases I have the following error: puttygen: error loading `myPrivateKey.key': unrecognised key type By the way, this key doesn't have a passphrase. I found an old thread about it, but I'm using 0.6.3 version which is newer than what this thread recommends: http://fixunix.com/ssh/541874-puttygen-unable-import-openssh-key.html I've managed to solve this issue by using another gui client Fugu for Mac, but one of my co-worker uses windows and I still have to figure this out. Since Filezilla is the de-facto ftp client, I thought it would be easier to solve it there. Thanks

    Read the article

  • How to backup a NAS drive to a USB drive?

    - by Tim Murphy
    How would you backup 600+ GB of data on a NAS (Network-Attached Storage) drive to a USB external drive? The NAS drive does not contain mission critical data nonetheless I wish to make weekly copies of it just in case. The NAS drive is almost exclusively used as an archive dump and is rarely updated. However the backup strategy used must have a simple restore procedure so I can confidently say the data now on the NAS drive is exactly how it was at the time of backup. I did try xcopy but seemed like it would take many-many hours and eventually crashed with insufficient memory. http://www.ctunion.com/node/114 suggests I would need to use xxcopy instead due to folder/file name lengths. My concern with xcopy/xxcopy is the length of time it takes. Hoping something else is faster. NAS drive is DLink DNS-313. 1TB drive installed. Connected to router via Ethernet cable. USB drive is Seagate 1TB. Can be connected to Windows Vista (preferred) or Windows 7 PCs. Both PCs are usually connected Wirelessly however ethernet cable can be used during backup to speed up the process.

    Read the article

  • What is the quickest reliable way to backup a NAS drive to a USB drive?

    - by Tim Murphy
    How would you backup 600+ GB of data on a NAS (Network-Attached Storage) drive to a USB external drive? The NAS drive does not contain mission critical data nonetheless I wish to make weekly copies of it just in case. The NAS drive is almost exclusively used as an archive dump and is rarely updated. However the backup strategy used must have a simple restore procedure so I can confidently say the data now on the NAS drive is exactly how it was at the time of backup. I did try xcopy but seemed like it would take many-many hours and eventually crashed with insufficient memory. http://www.ctunion.com/node/114 suggests I would need to use xxcopy instead due to folder/file name lengths. My concern with xcopy/xxcopy is the length of time it takes. Hoping something else is faster. NAS drive is DLink DNS-313. 1TB drive installed. Connected to router via Ethernet cable. USB drive is Seagate 1TB. Can be connected to Windows Vista (preferred) or Windows 7 PCs. Both PCs are usually connected Wirelessly however ethernet cable can be used during backup to speed up the process.

    Read the article

  • How to fix a bootable USB Kubuntu installation when the drive has maxed out?

    - by NoCatharsis
    I used Universal-USB-Installer-v1.5.1 from PenDriveLinux.com with Kubuntu 10.04 so I could set up my 4GB flash drive as a totally independent installation. Unfortunately, there was an OS upgrade available which Kubuntu downloaded and attempted to install. This, along with some other software, apparently maxed out my drive before I realized it. Now when I try to boot from the drive, everything boots as normal to the OS boot screen where I select "Boot from this Kubuntu USB Installation." The startup process initiates, then stalls about halfway through and hangs indefinitely. I'm guessing the drive is trying to use space it doesn't have and completely stops working. I realize that once the OS upgrade is in place, the old files could be deleted for a potential 700MB space gain. However, I just have no way to get into the OS and complete the upgrade. My main OS is Windows 7. Is there a way I can fix this issue from within Windows without formatting the entire drive and reinstalling Kubuntu from scratch?

    Read the article

  • Fingerprint of PEM ssh key

    - by Unknown
    I have a PEM file which I add to a running ssh-agent: $ file query.pem query.pem: PEM RSA private key $ ssh-add ./query.pem Identity added: ./query.pem (./query.pem) $ ssh-add -l | grep query 2048 ef:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX ./query.pem (RSA) My question is how I can get the key fingerprint I see in ssh-agent directly from the file. I know ssh-keygen -l -f some_key works for "normal" ssh keys, but not for PEM files. If I try ssh-keygen on the .pem file, I get: $ ssh-keygen -l -f ./query.pem key_read: uudecode PRIVATE KEY----- failed key_read: uudecode PRIVATE KEY----- failed ./query.pem is not a public key file. This key starts with: -----BEGIN RSA PRIVATE KEY----- MIIEp.... etc. as opposed to a "regular" private key, which looks like: -----BEGIN RSA PRIVATE KEY----- Proc-Type: 4,ENCRYPTED DEK-Info: AES-128-CBC,E15F2.... etc.

    Read the article

  • What USB key would you recommend using for running a Windows 7 VM off of?

    - by Darryl Hein
    Because I can't find a good PHP editor for OSX, I develop in Windows with PhpEd. At the moment, my development time is split between a desktop and a laptop. To partially solve the problem of having 2 different environments, I have installed a virtual machine (through Virtual Box) and put the hard drive file on an external hard drive. At the moment, I've been connecting it through Firewire 800. I have 2 problems with this setup: (1) The hard drive is fairly large so to carry the laptop and hard drive I pretty much require a backpack. (2) The hard drive requires quite a bit of power and therefore reduces the battery life (by about 40%). My thought is to move the VM hard drive onto a USB key. I realize it will be slower, but as I'm just using it for PHP development, there isn't a lot of disk activity in the VM. The only really intense time is boot up, otherwise, it just about sits idle. Do anyone have any suggestions on a USB key to use for the VM? It would need to a minimum of 32GB.

    Read the article

  • Multiboot USB (OSX only): How to customize partition name?

    - by wrk2bike
    Trying to deal with all the Mac OSX recovery disks I've got by moving them to bootable USB images. I've got a big USB drive with multiple partitions for each recovery disk, and it's easy to use Disk Utility to "restore" the recovery DVD to a partition. When I boot my target Mac while holding down the Alt key, I can see all my bootable images and they work great. Problem is, they've all got the same name: "Mac OS X Install DVD." I manage Macs of various vintages. If my target Mac needs 10.6.3 for example, my only option seems to be to try each one until I get past the "Mac OSX can't be installed on this computer" message. I originally named my partitions with the OSX revision number, but that name is replaced by the disk image name during Disk Utility restore. Is there any way to customize the name during or after Disk Utility restore? I tried making a new DVD image on disk first and renaming it, but when I restore it to my recovery partition it has the original name. EDIT: After booting to the wrong partition, and getting the "..can't be installed" message, I can open the Startup Disk menu and see the other partitions - and as I select each one, the info at the bottom indicates which OS revision is on that partition. So I know the info is in there! Just want it at the boot screen if possible.

    Read the article

  • Ubuntu Installation Help for an IBM R31 Thinkpad

    - by David Taylor
    I recently acquired an old IBM R31 Thinkpad, and I'd figure I'd install Lubuntu on it. I've followed the quick steps for USB installation on the help wiki page, but I can't seem to get it to boot from my formatted flash drive. I've checked the boot priority on the BIOS page, but the option to boot from USB doesn't even seem to be there. The only bootable options are legacy and USB floppy drives. The CD drive is shot, so I can't install from there either. Do I have any other options for installation without having to pay for a floppy drive or a replacement CD drive? The wiki pages mentions something about installation from within Windows. Would it be possible to remove Windows using this option, or would it just create a partition? Thanks

    Read the article

  • 13.10 - Weird WiFi connection problems - WMP300N - Broadcom BCM4321

    - by user1898041
    Just installed 13.10 on my desktop and I really like it. After having problems with getting the wifi to work, I installed it connected to the internet with an ethernet cable and added in the 3rd party software and updates as per the installation procedure. After installation was completed, I saw the wifi icon in the upper right hand corner, but it was not seeing any wifi networks. Some Googling brought me to use the 'Additional Drivers' application. It found the WMP300N Broadcom BDM4321 based pci wifi card and installed the proprietary Broadcom STA wireless driver, which may have been installed before. I'm not sure. Here is the weird part: when I start my system, wifi seems to be in some sort of suspended state where the system sees that the card exists but the card will not detect any wifi networks. It will work after booting once I 'Additional Drivers' application and then start FireFox. I know it seems weird, but this is the process I've got down to get the card to recognize wifi networks. After those applications are open for a few seconds, the card starts to function like normal (although maintaining the wifi connection is problem but most likely a seperate issue). The reason this is a problem is because this is supposed to just be a headless box managed through SSH. Here are the readouts from the common network diagnosis programs BEFORE I open 'Additional Drivers' and 'FireFox'. All commands were done with sudo. lspci 00:00.0 Host bridge: Intel Corporation 82G35 Express DRAM Controller (rev 03) 00:01.0 PCI bridge: Intel Corporation 82G35 Express PCI Express Root Port (rev 03) 00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 02) 00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 02) 00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 02) 00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 02) 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 02) 00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 02) 00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 02) 00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 02) 00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 02) 00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 02) 00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92) 00:1f.0 ISA bridge: Intel Corporation 82801IR (ICH9R) LPC Interface Controller (rev 02) 00:1f.2 SATA controller: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 6 port SATA Controller [AHCI mode] (rev 02) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 02) 01:00.0 VGA compatible controller: NVIDIA Corporation GT216 [GeForce GT 220] (rev a2) 01:00.1 Audio device: NVIDIA Corporation High Definition Audio Controller (rev a1) 02:00.0 Ethernet controller: Qualcomm Atheros Attansic L1 Gigabit Ethernet (rev b0) 03:00.0 IDE interface: JMicron Technology Corp. JMB368 IDE controller 05:00.0 Network controller: Broadcom Corporation BCM4321 802.11b/g/n (rev 01) 05:03.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller (rev c0) - lshw *-network description: Ethernet interface product: Attansic L1 Gigabit Ethernet vendor: Qualcomm Atheros physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: b0 serial: 00:22:15:00:a8:12 capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1 driverversion=2.1.3 latency=0 link=no multicast=yes port=twisted pair resources: irq:46 memory:feac0000-feafffff memory:feaa0000-feabffff *-network description: Wireless interface product: BCM4321 802.11b/g/n vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:05:00.0 logical name: eth1 version: 01 serial: 00:23:69:d8:2b:16 width: 32 bits clock: 33MHz capabilities: bus_master ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=6.30.223.141 (r415941) latency=64 multicast=yes wireless=IEEE 802.11abg resources: irq:16 memory:febfc000-febfffff - ifconfig eth0 Link encap:Ethernet HWaddr 00:22:15:00:a8:12 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) eth1 Link encap:Ethernet HWaddr 00:23:69:d8:2b:16 inet6 addr: fe80::223:69ff:fed8:2b16/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:16 Base address:0xc000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:24 errors:0 dropped:0 overruns:0 frame:0 TX packets:24 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:1856 (1.8 KB) TX bytes:1856 (1.8 KB) - iwconfig eth1 IEEE 802.11abg ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=200 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:off - iwlist scan eth1 No scan results - Here are the various commands AFTER I open 'Additional Drivers' and 'FireFox' lspci 00:00.0 Host bridge: Intel Corporation 82G35 Express DRAM Controller (rev 03) 00:01.0 PCI bridge: Intel Corporation 82G35 Express PCI Express Root Port (rev 03) 00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 02) 00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 02) 00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 02) 00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 02) 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 02) 00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 02) 00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 02) 00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 02) 00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 02) 00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 02) 00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92) 00:1f.0 ISA bridge: Intel Corporation 82801IR (ICH9R) LPC Interface Controller (rev 02) 00:1f.2 SATA controller: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 6 port SATA Controller [AHCI mode] (rev 02) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 02) 01:00.0 VGA compatible controller: NVIDIA Corporation GT216 [GeForce GT 220] (rev a2) 01:00.1 Audio device: NVIDIA Corporation High Definition Audio Controller (rev a1) 02:00.0 Ethernet controller: Qualcomm Atheros Attansic L1 Gigabit Ethernet (rev b0) 03:00.0 IDE interface: JMicron Technology Corp. JMB368 IDE controller 05:00.0 Network controller: Broadcom Corporation BCM4321 802.11b/g/n (rev 01) 05:03.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller (rev c0) - lshw *-network description: Ethernet interface product: Attansic L1 Gigabit Ethernet vendor: Qualcomm Atheros physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: b0 serial: 00:22:15:00:a8:12 capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1 driverversion=2.1.3 latency=0 link=no multicast=yes port=twisted pair resources: irq:46 memory:feac0000-feafffff memory:feaa0000-feabffff *-network description: Wireless interface product: BCM4321 802.11b/g/n vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:05:00.0 logical name: eth1 version: 01 serial: 00:23:69:d8:2b:16 width: 32 bits clock: 33MHz capabilities: bus_master ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=6.30.223.141 (r415941) ip=192.168.1.103 latency=64 multicast=yes wireless=IEEE 802.11abg resources: irq:16 memory:febfc000-febfffff - ifconfig eth0 Link encap:Ethernet HWaddr 00:22:15:00:a8:12 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) eth1 Link encap:Ethernet HWaddr 00:23:69:d8:2b:16 inet addr:192.168.1.103 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::223:69ff:fed8:2b16/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:85 errors:0 dropped:0 overruns:0 frame:11901 TX packets:132 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:52641 (52.6 KB) TX bytes:19058 (19.0 KB) Interrupt:16 Base address:0xc000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:76 errors:0 dropped:0 overruns:0 frame:0 TX packets:76 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:6084 (6.0 KB) TX bytes:6084 (6.0 KB) - iwconfig eth1 IEEE 802.11abg ESSID:"BU" Mode:Managed Frequency:2.447 GHz Access Point: 00:26:F2:1F:81:02 Bit Rate=54 Mb/s Tx-Power=200 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:off Link Quality=59/70 Signal level=-51 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 - iwlist scan A LOT OF SSIDs FOUND! - I'd like to have this problem fixed, but I'm not quite sure where to go. Been Googling a lot and can't seem to find anyone else with this problem.

    Read the article

  • fat32 partition lock

    - by gsedej
    Hi! A am asking about problem with USB data stick (that uses fat32 file system). If you unplug USB stick without unmounting (safly remove) data may become locked when you mount USB stick another time (you can't make changes to files). If you unmount and mount partition few times, data becomes normally accessable. Problem is that I can not repeat (force) this problem now. But it has happend many times even recently. Has this been happening to somoeone else?

    Read the article

  • Nvidia problems. I think.

    - by Nate D.
    Let me start off by saying, I've been trying to run Ubuntu on my custom PC for about 2 years. From 10.04 to 12.04, this problem persists. When I try to boot Ubuntu from either a USB stick or a CD, I see the normal Ubuntu splash screen. It looks like it's working, orange dots are moving, but then the screen glitches and freezes. I'm assuming this happens because there are no drivers for my graphics card (Nvidia GeForce 8800, I think). My motherboard has no onboard graphics, nor does it have a VGA out. So, how can I get this working on my system? Can I somehow put the drivers along side the .img on the USB stick? I can boot from my Ubuntu USB stick on my MacBook. In case that helps anyone...

    Read the article

  • (Xubuntu) no touchpad or mouse on Aspire One D270

    - by Sman789
    I installed Xubuntu 12.10 on an Aspire One D270 using a Live USB. Initially, the live USB wouldn't boot, but by running sudo apt-get dist-upgrade on it (on a different machine), I upgraded the kernel and it now works perfectly. However, after installing Xubuntu from the stick onto the D270, neither the touchpad nor an external mouse works. If I use the keyboard to navigate to the mouse settings, the 'device' setting is greyed out. I don't see why the mouse should work perfectly when running from the live USB but not once installed to the machine...? Thanks for any help.

    Read the article

  • Unable to use TL-WN821N

    - by udiw
    Hi, I got a TP-LINK USB wireless module - TL-WN821N, using Ubuntu 10.4 (same problems were also seen in 10.10). From everything I've read online, the usb should work just fine, since the Atheros ar9170 is built into the kernel. However, when I plug it in, it is detected as a USB device, but there is no wlan associated with it, and basically - nothing happens. Am I doing something wrong? what should I do so that the Atheros driver is associated with this device? btw, on Windows it works fine (with the drivers). Some logs: $ uname -mr 2.6.32-28-generic i686 $ lsb_release -d Description: Ubuntu 10.04.2 LTS $ lsusb ... (trimmed) Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 017: ID 0cf3:7015 Atheros Communications, Inc. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub $ lsmod |grep ar9 ar9170usb 51296 0 ath 7611 1 ar9170usb mac80211 205402 3 ar9170usb,iwl3945,iwlcore cfg80211 126528 5 ar9170usb,ath,iwl3945,iwlcore,mac80211 led_class 2864 4 ar9170usb,iwl3945,iwlcore,sdhci

    Read the article

  • Why won't Ubuntu copy large files to FAT32 flash Drives?

    - by yurividal
    Since I installed 11.10 I am unable to copy large files (say 1gb or more) to ANY usb drive that is formated as FAT. The file starts copying, but soon an error appears, saying "Unable to Copy" . "Error splicing file: Input/output error". I am able to do it via terminal, using the cp command. I use Gnome3, but the same error has happened in Unity as well. Apparently it works if I format the USB drive as NTFS or EXT3, EXT4. But, for many appliances, FAT is necessary. The problem is also not with the USB port, because it works under Windows. It did not happen before, when I had 10.04 installed.

    Read the article

< Previous Page | 62 63 64 65 66 67 68 69 70 71 72 73  | Next Page >