Search Results

Search found 30695 results on 1228 pages for 'old software'.

Page 663/1228 | < Previous Page | 659 660 661 662 663 664 665 666 667 668 669 670  | Next Page >

• MS Server 2003 Activiation Loop

  - by RPGonzo

  Recently we had a motherboard failure on a terminal server so we replaced the faulty motherboard, re-setup the RAID arrays (same motherboard but still wouldn't recognize old RAID setup) and continued to recover the system from a previous backup. No problem up to here, after restoring the system you are prompted to reboot and than login. On login we get a message box stating that Windows needs to be activated do you want to activate now, press yes but than the OS proceeds to log you off and do nothing at all. You can try over and over but to no avail. Found a few articles about a glitch in the activation script and how to reset it, tried that with the same results. Hoping someone can share some knowledge if you have seen this before? Thanks!

  Read the article

• Unable to resolve hostname on a proxy network

  - by ali

  I can browse sites using firefox configured with proxy 172.1.6.0.6:3128 resolv.conf domain pudhcp.ac.in search pudhcp.ac.in nameserver 172.16.0.7 I checked with Windows and I found the same DNS server settings 127.0.0.1 bt 127.0.1.1 bt Above is the hosts file I modified the top line from localhost to bt still not working bt is the hostname Still I can't ping to google.com - it is showing unable to resolv hostname I tried all solutions,I guess proxy is used even for DNS resolution root@bt:~# dhclient There is already a pid file /var/run/dhclient.pid with pid 7157 killed old client process, removed PID file Internet Systems Consortium DHCP Client V3.1.1 Copyright 2004-2008 Internet Systems Consortium. All rights reserved. For info, please visit http://www.isc.org/sw/dhcp/ Listening on LPF/eth1/5c:ac:4c:b1:0c:7c Sending on LPF/eth1/5c:ac:4c:b1:0c:7c Listening on LPF/eth0/60:eb:69:18:4d:3d Sending on LPF/eth0/60:eb:69:18:4d:3d Sending on Socket/fallback DHCPREQUEST of 172.16.6.87 on eth0 to 255.255.255.255 port 67 DHCPACK of 172.16.6.87 from 172.16.6.1 bound to 172.16.6.87 -- renewal in 79432 seconds.

  Read the article

• pfSense command to delete stale SAD

  - by Justin Shin

  I'm experiencing an issue with pfSense where duplicate SAD's are getting created after rekeying, forcing me to manually go ahead and delete the old SAD's. It's not a huge issue but it does get to be a problem once I let it go for a few days. I just installed the cron package for pfSense so I could run a script to identify stale SAD's and delete them but I am not that familiar with BSD or pfSense. Is there a command that enumerates SAD's and their properties, and another that can delete by ID? I can form the conditional parts of the script but I do not know the commands to run. I would imagine it would be something like: Enumerate SAD's Identify Duplicate ones by matching Source and destination IP's Find the one with the larger bytes transferred Delete

  Read the article

• Why are they putting "processors" on hard drives?

  - by Celeritas

  What does it mean when they have a processor on the hard drive, how does it work, and what benfit does it have? I don't understand - the CPU is the processor and the hard drive transfers it's contents to RAM. Do have additional processors, preprocess the data some how? Here's some examples Western Digital WD Black WD1002FAEX 1TB "Dual processor speed" NETGEAR ReadyNAS 312 2-Bay Diskless Network Attached Storage "Dual-core Intel 2.1GHz processor and 2GB on-board memory" and routers now have processors too, why's that nescecary? I guess it sort of makes sense - some logic needs to happen for the packets to be read in to know which ports to send them out on, but why did old routers not need them? Example or wireless router with processor: "Dual-core processor"

  Read the article

• How do I tell sudo to write files with a umask of 0022?

  - by mipadi

  I recently upgrading to Snow Leopard. I have noticed that some files written by MacPorts are installed with the wrong permission -- they are written with a umask of 0077. I think I have narrowed down the problem: The port command is invoked via sudo. My .bashrc file specifies a umask of 0077. On older versions of OS X (10.5 and below), sudo used the umask of the root user (which was 0022); however, now it uses my umask of 0077. Is there anyway to have sudo use the old behavior? Right now, it's kind of annoying because I have to use sudo to run simple commands like port installed, port outdated, etc. (The problem is described in more detail in this MacPorts ticket.) Edit I discovered the umask option for sudo, and in /etc/sudoers I added the following line: Defaults umask=0022 However, this did not function as desired, because the real umask used by sudo is the union of the user mask with this default mask.

  Read the article

• HP ML115 with P400 Smart Array Controller

  - by John

  Hi, I have a HP ML115 server I have installed a HP P400 Smart Array Controller card, I also have 4 x 1TB Samsung Hard drives. I'm unable to get the the controller to detect the hard drives, I have changed the drives to SATA 1.5G without luck, I have also tried connecting a single 80GB Maxtor drive without luck The controller shows up just after boot and tries to initialize, The controller does not show up in the POST prompt, although I can see the controller when booting off a ACU CD THe controller firmware is a little old v4.12 but I have no way to update it. Any ideas on how I can get this going?

  Read the article

• When i log on then i get annyoing cmd windows in windows7

  - by user191542

  I am using windows 7 on my office PC and that is linked with Active directory. I dont't know what happend if installed something few days ago many small softwares. I don't know if there was some virus or something but anti virus didn't tell anything. Now when i log ion then i keep getting many cmd screen opening and closing and i can't do anything. If i switch user and log with my admin acount then it also happens again witha dmin account. Now when again if i go back to old screen by switching user. then annoying cmd windows are not there. i want to know how can i fix that I managed to get print screen of that

  Read the article

• Windows 8 Disk Mirroring vs Intel Fake RAID

  - by Johnny W

  So Windows 8 is out and I have a new motherboard. I wish to create a RAID 1 coupling between two HDDs -- for storage purposes only (my OS is on an SSD) -- but I don't know which is the best route to take. My motherboard (Z77 chipset) comes with the age old Intel Fake RAID, but since I only wish to use my RAID for storage, I wondered if I might be better to use Windows 8 Disk Mirroring. Can anyone advise which is better? Or perhaps the pros and cons of each, if that's too contentious? I just can't see the benefit of FakeRAID. You can see my current setup here, if that might change things(?): Thanks!

  Read the article

• Can I drive two external screens from an 'Alu' iMac?

  - by robsoft

  I've got a 24" 2.4 Ghz Core 2 Duo iMac. It's about 18 months old, though I can't specifically remember when I bought it. It has a Displayport Mini-DVI socket on the back, and currently I have that linked to a DVI adaptor driving a Philips 20" widescreen monitor in portrait mode (awesome for browsing). I have another, identical Philips monitor and wondered if there was a way of connecting that to the iMac too. Is there such a thing as a DisplayPort Mini-DVI to dual-DVIs adaptor? Can this iMac's graphics card even drive such a set-up? The graphics chipset in the iMac is reported as ATI Radeon HS2600, 256 MB. The main iMac display is 1920x1200 and the Philips display is 1050x1680 (@60Hz, rotated 90 degrees). The third screen would be another 1050x1680 and ideally I'd have it portrait again, too. EDIT: Please let this question stand - it's not a dupe. The current Mac laptops use 'Mini Displayport' connectors, which are not the same as DisplayPort Mini-DVI connectors.

  Read the article

• Recovering OS X Mail Accounts Lost in Crash

  - by Tim

  I had a hard crash on my Mac PowerBook and when I restarted, Mail came up with only my MobileMe account still available and I cannot figure out how to restore the other eight email accounts I have. The directories in ~/Library/Mail all seem to be there. I even did an rsync of the modified .plist files from a TimeMachine backup of the directory from before the crash (unfortunately, I was on travel, so the backup is more than a week old and I'd like to try and recover from that point without having to entirely restore from TimeMachine). I also did a fix permissions. So my questions are where exactly is the account information for Mac Mail kept? Any thoughts of what might have caused the failure? Why does only MobileMe come up? Any other thoughts on how to fix things?

  Read the article

• How to shorten DNS propagation effect

  - by Sempa

  Atm i have a domain example.com, it uses dedicated server, and it uses "ns1.example.com" and "ns2.example.com" as nameserver. Now i want to change to another dedicated server (with different IP obviously). How to shorten DNS propagation effect so that all visitors that open my domain will be pointed to the new server quickly? At this moment i am lowering the TTL value on old server (to 5 minutes) hoping that once i change the nameserver, all visitors will be pointed to new server. Am i correct? If not, can you give me suggestion?

  Read the article

• iPhoto fails to see my new iPhone 3Gs

  - by Alexey Kulikov

  Two weeks ago I have bought the new iPhone 3Gs. It synced like charm with iTunes and I was happy until a couple of days ago when I noticed that there was absolutely no way I could get any photos from the phone to my mac, as it doesn't even appear in the device list. Long story short — i have even tried resetting Leopard completely from scratch (and formatting the HD beforehand). Still no joy. Leopard Snow 10.6.1 absolutely clean install with all updates iPhone 3Gs 3.1.2 - syncs like charm with iTunes, but NOT iPhoto Mac Book Air Any help will be greatly appreciated! update: It works with my old iphone, why can't the 3Gs work?

  Read the article

• How do I restore a non-system hard drive using Time Machine under OSX?

  - by richardtallent

  I dropped one of the external drives on my Mac Pro and it started making noises... so I bought a replacement drive. No biggie, that's why I have Time Machine, right? So now that I have the new drive up and initialized, how do I actually restore the drive from backup? Time Machine is intuitive when it comes to restoring the system drive or restoring individual folders/files on the same literal device, but I'm a bit stuck in how to properly restore an entire drive that is not the boot drive. I saw one suggestion to use the same volume name as the old drive and then go into Time Machine. Haven't tried that since the information is unconfirmed. For now, I just went to the Time Machine volume, found the latest backup folder for that volume, and I'm copying the files via Finder. Of couse, I expect this to work just fine, but I feel like I'm missing something if that's the "proper" way to do this.

  Read the article

• Setting up a NetApp as a simple FC LUN carver

  - by MikeyB

  For a particular application, I want to configure a NetApp filer (7-mode) to be as close as possible to an old-fashioned storage subsystem without snapshots or fancy features. vol create vol_ESX -s volume aggr1 1500M vol options vol_ESX nosnap on vol options vol_ESX nosnapdir on vol options vol_ESX fractional_reserve 0 snap sched vol_ESX 0 0 0 snap reserve vol_ESX 0 # Ensure no snapshots exist on vol_ESX snap list vol_ESX # Create a LUN or multiple LUNs that take up the entire volume lun create -s 1565523968 -t vmware /vol/vol_ESX/lun0 lun map /vol/vol_ESX/lun0 challenger Is this safe? Is this the Best Way of doing what I'm trying to accomplish? Is there anything else I should set?

  Read the article

• Windows 2008 R2 File Sharing - 'Access denied' if groups are specified in ACL

  - by John Smith

  I am trying to move our old Windows 2003 File Server to Windows 2008 R2. What I have noticed, however, is that the entries for groups in the ACL are being ignored. For example, a user is part of a group in active directory. If I create a folder and enable full access for this group, then share this folder (and define sharing permissions for this group), users in that group do not get access to that folder. If I make an entry in the ACL for the user itself, it works perfectly. These even applies to my domain administrator account - If I create a folder and give full control to the local administrators group / domain administrators group, and I physically log on to the server, I still do not get access - I need to explicitly define my name to proceed. I am not sure what the problem is, tried looking it up in Google to no avail Any assistance will be greatly appreciated

  Read the article

• How to get rid of resume information on ubuntu 9.10 ("karmic")

  - by Glen S. Dalton

  I am on an old laptop with Ubuntu 9.10 installed. I once tried to not shutdown but go into one of the resume states. On the next power on, resume did not work, but there was an error message during boot asking me for the resume image (which I do not have or know of) and when I press enter the normal boot happens. But this error pops up on every boot now. How can I get back the behaviour from before? Why does the boot process guess there would be a resume image and can I delete this information? I would like to post here the error messages from the boot proces, but they are not in /var/log/syslog, where else can they be?

  Read the article

• Exchange 2007 to 2010 public folder replication error 1129

  - by Keith

  I currently upgrading from an Exchange server 2007 to 2010. I have moved all mailboxes and OAB. I am having issues replicating the public folders. This is the error I'm getting in the event log on the 2007 box: Error 1129 occurred while processing a replication event. Folder: (6-11ED8367F0C) IPM_SUBTREE\Marketing\Marketing I have looked online and everything about these errors seems to relate from an old 2003 server. Well, we never had a 2003 server. I'm really not sure what to do at this point. Any help?

  Read the article

• what firefall linux distro applicance could track internet usage per device in my home?

  - by GregH

  Hello, Anyone know of a community edition/open source/free firewall/gateway software product that I could install onto an old PC to act as my firewall/gateway/proxy etc, BUT for which it has the power to track internet usage per device in my home. So: a) Mandatory - Track internet usage for devices on my home network on a per device basis (e.g. various PCs/Xbox etc) b) Mandatory - Report/graph would would give a breakdown of internet usage, per device (e.g. IP address), per day. c) Desirable - as in b) above but per hour d) Desirable - realtime graph (e.g. 5 minute measurement intervals or something) that shows current internet usage per device e) Mandatory - Handles all internal<=internet requests for all protocols (e.g. HTTP, HTTPS, xbox etc) f) Mandatory - No explicit settings in clients required - i.e. Transparent Monitoring concept (for both HTTP and non-HTTP traffic like xbox, skype etc) g) Mandatory - easy "appliance" like installation onto a dedicated low spec PC thanks in advance

  Read the article

• what firefall linux distro applicance could track internet usage per device in my home?

  - by GregH

  Hello, Anyone know of a community edition/open source/free firewall/gateway software product that I could install onto an old PC to act as my firewall/gateway/proxy etc, BUT for which it has the power to track internet usage per device in my home. So: a) Mandatory - Track internet usage for devices on my home network on a per device basis (e.g. various PCs/Xbox etc) b) Mandatory - Report/graph would would give a breakdown of internet usage, per device (e.g. IP address), per day. c) Desirable - as in b) above but per hour d) Desirable - realtime graph (e.g. 5 minute measurement intervals or something) that shows current internet usage per device e) Mandatory - Handles all internal<=internet requests for all protocols (e.g. HTTP, HTTPS, xbox etc) f) Mandatory - No explicit settings in clients required - i.e. Transparent Monitoring concept (for both HTTP and non-HTTP traffic like xbox, skype etc) g) Mandatory - easy "appliance" like installation onto a dedicated low spec PC thanks in advance

  Read the article

• Can't save DB password in BDE Admin v5.01 (c. 1998)

  - by Ryan Armstrong

  I have a legacy version of Goldmine running which uses BDE to connect to an SQL2005 server. I'm moving the goldmine application and its database onto a new server and all is fine with the exception of the master DB password. When Goldmine starts it prompts for the password. I enter the password and all is fine but I want the prompt to go away. The password appears to be saved and obfuscated somewhere on the old server but this was configured before my time. As best I can determine, I use the bdeadmin.exe tool to modify the idapi32.cfg file but there is no password option.

  Read the article

• How to mark received sites as read in StumbleUpon toolbar?

  - by Prashant

  In stumbleupon toolbar for Firefox there is a "92" text is displayed in above pic, these are basically sites sent to me by my stumbleupon friends, so whenever I have sites from my friends, there in the toolbar and when I clicks the Stumble button then it shows those sites to me instead any new site. You can say these are link are like new mails, so there are 92 new mails for me, but I don't want to check those I just want to mark them as read in a single click, and move further to read other old mails. So Is there any option to mark these sites (sent to me by my SU friends) as read, so that when I click Stumble button then new sites will be shown instead sites which are sent by my friends??

  Read the article

• How do I get my laptop's screen brightness settings back?

  - by Mason Wheeler

  From when I bought it up until yesterday, my laptop would dim the screen automatically if you let it sit for long enough, and then if you hit a key or moved the mouse, the brightness would jump back to what you had it at. I enjoy that behavior. It works well. Then I booted it up today, and found that now it will dim the screen automatically if you let it sit for long enough, but it doesn't restore the screen brightness. I have to do that manually, every single time, and it's getting really old really fast. It's an Alienware M17 running Windows 7 64-bit, in case that helps.

  Read the article

• Using Find, Grep, Awk, or Sed To Rename Server After Cloning

  - by ServerChecker

  My client tells me they have cloned a VM in VMWare of an Ubuntu Linux server. Now it's my job to get into all the files and find out what still has the old server name of "bishop" and change it to something else. Also, the IP address is changed and I need to search for that too. How would you typically use find, grep, awk, or sed to find these files and then change them rapidly? In the end, I want to make a Bash script. Of course, I'm not expecting you to tell me every file, but just want to know the technique for finding files with "x" in it and then switching that rapidly with "y".

  Read the article

• SAN newbie: What kind of fiber cables do I need to connect to the front end ports on my EMC CX300

  - by red888

  I have an old CX300 I'm messing with and I cant determine what kind of HBA\fiber cables I need to connect a server to the front end ports on the DPE2. The hardware reference doesn't give me any details and being new to FC-SAN all of the options are pretty overwhelming. I don't know if the ports are SC or LC or if it requires singlemode or multimode. Googling hasn't turned up anything for me either. All I know is that it supports 2GB Fiber. Here is a pic of one the modules. You can clearly see the front-end ports (FE)

  Read the article

• Entering Unicode Characters using NumPad in Chrome conflicting with Options Menu

  - by YatharthROCK

  TL;DR: Can't use E while entering Unicode on NumPad — conflicting with Options menu OK, so I finally got entering Hex Unicode chars on my laptop using the NumPad working using this answer from this link But when I was trying to enter the Irony Mark (? U+2E2E), as soon as I hit the E, Options opened up like in old-style menus where pressing Alt + letter brought up the relevant menu. This annoying behaviour doesn't let me enter any Unicode code-point that has an E. This works fine outside Chrome. How can I stop this?

  Read the article

< Previous Page | 659 660 661 662 663 664 665 666 667 668 669 670  | Next Page >