Search Results

Search found 24177 results on 968 pages for 'true'.

Page 663/968 | < Previous Page | 659 660 661 662 663 664 665 666 667 668 669 670  | Next Page >

• Bad sectors, S.M.A.R.T., SpinRite, firmware on platter and drive id questions.

  - by Christopher Galpin

  Is it possible for S.M.A.R.T. to give false readings (say I was fiddling with lots of recovery programs, transfers, so on and so forth) or is it absolutely a read-only direct correlation to the physical status of a drive? Does SpinRite level 5 "recover bad sectors" operate on those marked at the factory? Are they on the same level as your generic bad sector, with SpinRite thus having full access? (Also I'm curious if SMART's bad sector count is zero'd afterward or if it includes factory marked sectors.) The main firmware of some drives, like a WD Passport is stored on the platter. How is it protected? Is it through marking them as bad sectors? If so, I'm wondering if SpinRite's sector recovery could bring about firmware corruption on these drives. Is the failure of a drive to report valid identity information (hdparm -I /dev/xx) consistent with corrupted firmware, or just general disk failure? I may be misunderstanding the role of firmware here. I feel I've read a drive's identity information is on the platter, just like the partition tables and so on. Is this true? (Apologizes if this is more appropriate for SuperUser.)

  Read the article

• What are the attack vectors for passwords sent over http?

  - by KevinM

  I am trying to convince a customer to pay for SSL for a web site that requires login. I want to make sure I correctly understand the major scenarios in which someone can see the passwords that are being sent. My understanding is that at any of the hops along the way can use a packet analyzer to view what is being sent. This seems to require that any hacker (or their malware/botnet) be on the same subnet as any of the hops the packet takes to arrive at its destination. Is that right? Assuming some flavor of this subnet requirement holds true, do I need to worry about all the hops or just the first one? The first one I can obviously worry about if they're on a public Wifi network since anyone could be listening in. Should I be worried about what's going on in subnets that packets will travel across outside this? I don't know a ton about network traffic, but I would assume it's flowing through data centers of major carriers and there's not a lot of juicy attack vectors there, but please correct me if I am wrong. Are there other vectors to be worried about outside of someone listening with a packet analyzer? I am a networking and security noob, so please feel free to set me straight if I am using the wrong terminology in any of this.

  Read the article

• Git push over http (using git-http-backend) and Apache is not working

  - by Ole_Brun

  I have desperately been trying to get push for git working through the "smart-http" mode using git-http-backend. However after many hours of testing and troubleshooting, I am still left with error: Cannot access URL http://localhost/git/hello.git/, return code 22 fatal: git-http-push failed` I am using latest versions of Ubuntu (12.04), Apache2 (2.2.22) and Git (1.7.9.5) and have followed different tutorials found on the Internet, like this one http://www.parallelsymmetry.com/howto/git.jsp. My VHost file currently looks like this: <VirtualHost *:80> SetEnv GIT_PROJECT_ROOT /var/www/git SetEnv GIT_HTTP_EXPORT_ALL SetEnv REMOTE_USER=$REDIRECT_REMOTE_USER DocumentRoot /var/www/git ScriptAliasMatch \ "(?x)^/(.*?)\.git/(HEAD | \ info/refs | \ objects/info/[^/]+ | \ git-(upload|receive)-pack)$" \ /usr/lib/git-core/git-http-backend/$1/$2 <Directory /var/www/git> Options +ExecCGI +SymLinksIfOwnerMatch -MultiViews AllowOverride None Order allow,deny allow from all </Directory> </VirtualHost> I have changed the ownership of the /var/www/git folder to root.www-data and for my test repositories I have enabled anonymous push by doing git config http.receivepack true. I have also tried with authenticated users but with the same outcome. The repositories were created using: sudo git init --bare --shared [repo-name] While looking at the apache2 access.log, it appears to me that WebDAV is trying to be used, and that git-http-backend is never fired: 127.0.0.1 - - [20/May/2012:23:04:53 +0200] "GET /git/hello.git/info/refs?service=git-receive-pack HTTP/1.1" 200 207 "-" "git/1.7.9.5" 127.0.0.1 - - [20/May/2012:23:04:53 +0200] "GET /git/hello.git/HEAD HTTP/1.1" 200 232 "-" "git/1.7.9.5" 127.0.0.1 - - [20/May/2012:23:04:53 +0200] "PROPFIND /git/hello.git/ HTTP/1.1" 405 563 "-" "git/1.7.9.5" What am I doing wrong? Is it an issue with the version of git and/or apache that I am using perhaps? BTW: I have read all the git http related questions on ServerFault and StackOverflow, and none of them provided me with a solution, so please don't mark this as duplicate.

  Read the article

• Toshiba External Hard Drive freezes computer

  - by Ephraim

  I bought a Toshiba Canvio Basics E05A032BAU2XK Portable External 320GB 2.5 Hard Drive: My computer has two Os's on it Win7 and Win XP. I need both. The main one I use is XP. When booting my computer in any OS the computer and hard drive work fine. The same holds true for plugging in the hard drive while running Win7. However, when running WinXP, if the hard drive gets plugged in the computer freezes(my main point is that the HD is portable so it is essential that it does not do this, as I said I usually run XP). After reading some online forums I was informed that there is a compatibility issue with the newest version of Eset Smart Security(I still don't understand this because it works fine in Win7 or when connected on boot...). I disabled the AV and plugged in the HD... Walla! The comnputer did not freeze. However the disk is not recognized in explorer or disk management. In device manager I removed the device and did a scan and installation of device failed. It pretty much sounds like a driver issue but I cannot find any drivers for this HD. In fact, Toshiba claims that there are no downloadable drivers for it and that XP should take care of the drivers itself. What to do? As far as I can tell, all other USB devices work just fine on both OS. Please Help!

  Read the article

• Can one really fry a monitor by setting the wrong HorizSync and VertRefresh?

  - by rumtscho

  I've encountered this problem on several different systems with several different monitors: a monitor functions perfectly under Windows. I install a Linux and the max resolution is at some impossibly low value, mostly 640x480, changing it in Xorg.conf doesn't work. The X.org log file then shows that the driver cannot determine the correct refresh rate for the monitor, so it ignores everything in Xorg.conf and just loads in some default minimalistic mode. Googling the problem leads to an easy solution: set the HorizSync and VertRefresh in Xorg.conf, and everything works. The problem seems to be a common one, and I've seen dozens of results recommending the solution. Each of them contains the warning that you should use the value ranges provided with the monitor. Because if you don't, and your video card sends a signal with the wrong refresh rate, this can damage your monitor. Of course, you don't have a user manual for your monitor any more. If you are lucky to find one on the attic or on the net, it doesn't contain any information about the supported refresh rate. So you just type in the value suggested in the solution description, which varies wildly depending on your source, and cross your fingers. You restart, and... ... you've set the wrong values. So the monitor shows a short message like "input signal out of range", and you do a hard restart, repair your Xorg.conf in recovery mode, and everything is fine, including your monitor. So does this warning reflect a real possibility, or is it just a geeky urban legend? Or is it something which used to happen in the past, before manufacturers started protecting the monitors against it? Is it technically possible with every monitor technology, or is it maybe something which can only happen to a CRT? If you think that it's true, why? Have you ever witnessed a monitor die from the wrong refresh config, or have you read of it in a reputable source?

  Read the article

• Is it possible to use rsync over sftp (without an ssh shell)?

  - by Tom Feiner

  Rsync over ssh, works great every time. However, trying to rsync to a host which allows only sftp logins, but not ssh logins, provides the following error: rsync -av /source ssh user@remotehost:/target/ protocol version mismatch -- is your shell clean? (see the rsync man page for an explanation) rsync error: protocol incompatibility (code 2) at compat.c(171) [sender=3.0.6] Here's the relevant section from the rsync man page: This message is usually caused by your startup scripts or remote shell facility producing unwanted garbage on the stream that rsync is using for its transport. The way to diagnose this problem is to run your remote shell like this: ssh remotehost /bin/true > out.dat then look at out.dat. If everything is working correctly then out.dat should be a zero length file. If you are getting the above error from rsync then you will probably find that out.dat contains some text or data. Look at the contents and try to work out what is producing it. The most com- mon cause is incorrectly configured shell startup scripts (such as .cshrc or .profile) that contain output statements for non-interactive logins. Trying this on my system produced the following in out.dat: ssh-dummy-shell: Command not allowed. As I thought, the host is not allowing ssh logins. The following link shows that it is possible to accomplish this task using fuse with sshfs - however it is extremely slow, and not fit for production use. Is there any chance of getting rsync sftp to work?

  Read the article

• Setting up Mako with Cherrypy on nginx through FastCGI

  - by xuniluser

  I'm trying to use TemplateLookup from Mako, but can't seem to get it to work. Layout of the test site is: /var/www main.py templates/ index.html Nginx's config is setup as: location / { fastcgi_pass 127.0.0.1:8080; fastcgi_param SERVER_NAME $server_name; fastcgi_param SERVER_PORT $server_port; fastcgi_param SERVER_PROTOCOL $server_protocol; fastcgi_param PATH_INFO $fastcgi_script_name; fastcgi_param REQUEST_METHOD $request_method; fastcgi_param QUERY_STRING $query_string; fastcgi_param CONTENT_TYPE $content_type; fastcgi_param CONTENT_LENGTH $content_length; fastcgi_pass_header Authorization; fastcgi_intercept_errors off; } Cherrypy's config has: [global] server.socket_port = 8080 server.thread_pool = 10 engine.autoreload_on = False tools.sessions.on = True A simple cherrypy setup in main.py seems to work fine. import cherrypy class Main: @cherrypy.expose def index(self): return 'Hello' cherrypy.tree.mount(Main(), '/', config='config') Now, if I modify this to use Mako's template lookup, I get a 500 error. I know it has something to do with serving static files, but I've tried over a dozen different configurations accoring to the cherrypy wiki, but none of them work. Here's a bare setup I have for the templates: import cherrypy from mako.template import Template from mako.lookup import TemplateLookup templates = TemplateLookup(directories=['templates'], output_encoding='utf-8') class Main: @cherrypy.expose def index(self): return templates.get_template('index.html').render(msg='hello') cherrypy.tree.mount(Main(), '/', config='config') Does anyone know how I can get this to work ?

  Read the article

• How to Upload a file from client to server using OFBIZ?

  - by SIVAKUMAR.J

  Hi all, Im new to ofbiz.So is my question is have any mistake forgive me for my mistakes.Im new to ofbiz so i did not know some terminologies in ofbiz.Sometimes my question is not clear because of lack of knowledge in ofbiz.So try to understand my question and give me a good solution with respect to my level.Because some solutions are in very high level cannot able to understand for me.So please give the solution with good examples. My problem is i created a project inside the ofbiz/hot-deploy folder namely "productionmgntSystem".Inside the folder "ofbiz\hot-deploy\productionmgntSystem\webapp\productionmgntSystem" i created a .ftl file namely "app_details_1.ftl" .The following are the coding of this file <html> <head> <meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1"> <title>Insert title here</title> <script TYPE="TEXT/JAVASCRIPT" language=""JAVASCRIPT"> function uploadFile() { //alert("Before calling upload.jsp"); window.location='<@ofbizUrl>testing_service1</@ofbizUrl>' } </script> </head> <!-- <form action="<@ofbizUrl>testing_service1</@ofbizUrl>" enctype="multipart/form-data" name="app_details_frm"> --> <form action="<@ofbizUrl>logout1</@ofbizUrl>" enctype="multipart/form-data" name="app_details_frm"> <center style="height: 299px; "> <table border="0" style="height: 177px; width: 788px"> <tr style="height: 115px; "> <td style="width: 103px; "> <td style="width: 413px; "><h1>APPLICATION DETAILS</h1> <td style="width: 55px; "> </tr> <tr> <td style="width: 125px; ">Application name : </td> <td> <input name="app_name_txt" id="txt_1" value=" " /> </td> </tr> <tr> <td style="width: 125px; ">Excell sheet &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;: </td> <td> <input type="file" name="filename"/> </td> </tr> <tr> <td> <!-- <input type="button" name="logout1_cmd" value="Logout" onclick="logout1()"/> --> <input type="submit" name="logout_cmd" value="logout"/> </td> <td> <!-- <input type="submit" name="upload_cmd" value="Submit" /> --> <input type="button" name="upload1_cmd" value="Upload" onclick="uploadFile()"/> </td> </tr> </table> </center> </form> </html> the following coding is present in the file "ofbiz\hot-deploy\productionmgntSystem\webapp\productionmgntSystem\WEB-INF\controller.xml" ...... ....... ........ <request-map uri="testing_service1"> <security https="true" auth="true"/> <event type="java" path="org.ofbiz.productionmgntSystem.web_app_req.WebServices1" invoke="testingService"/> <response name="ok" type="view" value="ok_view"/> <response name="exception" type="view" value="exception_view"/> </request-map> .......... ............ .......... <view-map name="ok_view" type="ftl" page="ok_view.ftl"/> <view-map name="exception_view" type="ftl" page="exception_view.ftl"/> ................ ............. ............. The following are the coding present in the file "ofbiz\hot-deploy\productionmgntSystem\src\org\ofbiz\productionmgntSystem\web_app_req\WebServices1.java" package org.ofbiz.productionmgntSystem.web_app_req; import javax.servlet.http.HttpServletRequest; import javax.servlet.http.HttpServletResponse; import java.io.DataInputStream; import java.io.FileOutputStream; import java.io.IOException; public class WebServices1 { public static String testingService(HttpServletRequest request, HttpServletResponse response) { //int i=0; String result="ok"; System.out.println("\n\n\t*************************************\n\tInside WebServices1.testingService(HttpServletRequest request, HttpServletResponse response)- Start"); String contentType=request.getContentType(); System.out.println("\n\n\t*************************************\n\tInside WebServices1.testingService(HttpServletRequest request, HttpServletResponse response)- contentType : "+contentType); String str=new String(); // response.setContentType("text/html"); //PrintWriter writer; if ((contentType != null) && (contentType.indexOf("multipart/form-data") >= 0)) { System.out.println("\n\n\t**********************************\n\tInside WebServices1.testingService(HttpServletRequest request, HttpServletResponse response) after if (contentType != null)"); try { // writer=response.getWriter(); System.out.println("\n\n\t**********************************\n\tInside WebServices1.testingService(HttpServletRequest request, HttpServletResponse response) - try Start"); DataInputStream in = new DataInputStream(request.getInputStream()); int formDataLength = request.getContentLength(); byte dataBytes[] = new byte[formDataLength]; int byteRead = 0; int totalBytesRead = 0; //this loop converting the uploaded file into byte code while (totalBytesRead < formDataLength) { byteRead = in.read(dataBytes, totalBytesRead,formDataLength); totalBytesRead += byteRead; } String file = new String(dataBytes); //for saving the file name String saveFile = file.substring(file.indexOf("filename=\"") + 10); saveFile = saveFile.substring(0, saveFile.indexOf("\n")); saveFile = saveFile.substring(saveFile.lastIndexOf("\\")+ 1,saveFile.indexOf("\"")); int lastIndex = contentType.lastIndexOf("="); String boundary = contentType.substring(lastIndex + 1,contentType.length()); int pos; //extracting the index of file pos = file.indexOf("filename=\""); pos = file.indexOf("\n", pos) + 1; pos = file.indexOf("\n", pos) + 1; pos = file.indexOf("\n", pos) + 1; int boundaryLocation = file.indexOf(boundary, pos) - 4; int startPos = ((file.substring(0, pos)).getBytes()).length; int endPos = ((file.substring(0, boundaryLocation)).getBytes()).length; //creating a new file with the same name and writing the content in new file FileOutputStream fileOut = new FileOutputStream("/"+saveFile); fileOut.write(dataBytes, startPos, (endPos - startPos)); fileOut.flush(); fileOut.close(); System.out.println("\n\n\t**********************************\n\tInside WebServices1.testingService(HttpServletRequest request, HttpServletResponse response) - try End"); } catch(IOException ioe) { System.out.println("\n\n\t*********************************\n\tInside WebServices1.testingService(HttpServletRequest request, HttpServletResponse response) - Catch IOException"); //ioe.printStackTrace(); return("exception"); } catch(Exception ex) { System.out.println("\n\n\t*********************************\n\tInside WebServices1.testingService(HttpServletRequest request, HttpServletResponse response) - Catch Exception"); return("exception"); } } else { System.out.println("\n\n\t********************************\n\tInside WebServices1.testingService(HttpServletRequest request, HttpServletResponse response) else part"); result="exception"; } System.out.println("\n\n\t*************************************\n\tInside WebServices1.testingService(HttpServletRequest request, HttpServletResponse response)- End"); return(result); } } I want to upload a file to the server.The file is get from user "<input type="file"..> tag in the "app_details_1.ftl" file & it is updated into the server by using the method "testingService(HttpServletRequest request, HttpServletResponse response)" in the class "WebServices1".But the file is not uploaded. Give me a good solution for uploading a file to the server. Thanks & Regards, Sivakumar.J

  Read the article

• DNS-Based Environment Determination

  - by zvolkov

  Found the following here. The questions is: where can I find more details on how exactly implement this on Windows? Any guide or how-to anybody? Or maybe you can provide your invaluable suggestions? Specifically, how do I make so that "all QA servers would first resolve entries in qa.example.com first and then if that lookup failed they would try example.com" (I'm a dev, not a DNS specialist, but our IT Support has refused to help on this:() Use DNS Based Environment Determination for your servers. Do this by initially splitting your top level domain into a number of sub domains depending on their function, and then creating DNS Service Names in each of the sub domains pointing to the relevant server for that service. Based on the list above we would then have: * clientdb.prod.example.com for Production * clientdb.perf.example.com for Performance Testing * clientdb.qa.example.com for QA * clientdb.dev.example.com for Development Servers then resolve entries in their relevant sub domain by function. That is, all QA servers would first resolve entries in qa.example.com first and then if that lookup failed they would try example.com. This allows you to have a single configuration entry for your client database hostname (clientdb) that would resolve correctly in all environments. This technique has the added advantage of still having global services defined in a common top level domain. This seems to be related to Providing "split horizon" DNS service. Reading that, I see that I will probably need separate DNS Server for each environment. Is this true or does Windows support some form of "tagging" the records to be visible depending on the requestor's IP?

  Read the article

• What are "Excess Fragments" in defragmenting a hard drive?

  - by Andrew Swift

  I'm defragmenting my hard drive (XP SP3) with PerfectDisk 7.0, and it finds 816,659 excess fragments when I ask for an analysis. [update] Specifically, it shows that the 1TB disk is 14% fragmented with 19693 fragments and 816,659 excess fragments. About 20% of the disk is still free space. What does excess fragments refer to? What is the difference between fragments and excess fragments? I have had problems in the past where I defragmented a fragmented disk and many files were corrupted. It seemed as though "excess fragments" referred to orphan pieces, where the program couldn't find out where to put them. If that was true, then defragmenting a disk resulted in many incomplete files, and in fact I defragmented a disk full of MP3's and got a lot of corrupted files as a result. Instead, I started to simply format a separate disk and copy everything from one to the other. That way there were no orphan bits, and no file corruption. Does anybody know what "excess fragments" really are?

  Read the article

• Updating a backup image (.wim and/or Acronis .tib)

  - by Backdraft

  Anyways, I've got a Windows 7 installation that I want to make a generalized backup image of so I can use it for future installs on not only my desktop from which the image is to be derived from, but also other systems with dissimilar hardware. Therefore I've arrived at either 2 options, using either sysprep/imagx from WAIK (guide here), or the simpler Acronis True Image w/ their Universal Restore addon. Of course, they create distinct image file types, .wim and .tib respectively. What I'd like to do is to periodically update this image, say with Windows Updates, by booting it to either a physical partition or using virtualization (VirtualBox/VMWare), perform the updates, and save the updated .wim or .tib image file again. What's the simplest way I could do this? Another question is, I created this generalized backup image on a 500GB Seagate 7200RPM HDD. Say I get an SSD as an OS drive in the future, can I just deploy this backup image to the SSD normally, or are there any potential problems to be aware/avoid (ie. is it best to completely reinstall the OS on the SSD from scratch, or can I use the image created on the normal HDD with no issue)? Thanks and Happy Holidays.

  Read the article

• How to manage mounted partitions (fstab + mount points) from puppet

  - by Cristian Ciupitu

  I want to manage the mounted partitions from puppet which includes both modifying /etc/fstab and creating the directories used as mount points. The mount resource type updates fstab just fine, but using file for creating the mount points is bit tricky. For example, by default the owner of the directory is root and if the root (/) of the mounted partition has another owner, puppet will try to change it and I don't want this. I know that I can set the owner of that directory, but why should I care what's on the mounted partition? All I want to do is mount it. Is there a way to make puppet not to care about the permissions of the directory used as the mount point? This is what I'm using right now: define extra_mount_point( $device, $location = "/mnt", $fstype = "xfs", $owner = "root", $group = "root", $mode = 0755, $seltype = "public_content_t" $options = "ro,relatime,nosuid,nodev,noexec", ) { file { "${location}/${name}": ensure => directory, owner => "${owner}", group => "${group}", mode => $mode, seltype => "${seltype}", } mount { "${location}/${name}": atboot => true, ensure => mounted, device => "${device}", fstype => "${fstype}", options => "${options}", dump => 0, pass => 2, require => File["${location}/${name}"], } } extra_mount_point { "sda3": device => "/dev/sda3", fstype => "xfs", owner => "ciupicri", group => "ciupicri", $options = "relatime,nosuid,nodev,noexec", } In case it matters, I'm using puppet-0.25.4-1.fc13.noarch.rpm and puppet-server-0.25.4-1.fc13.noarch.rpm.

  Read the article

• Falsification of an email sent from lotus notes

  - by thejumper

  I needed from a person an important email with an attachment (I give the person a fictious name here: Name familyname) . The person sent me an email in the format below (I changed the content but respected the format). In the email he sent me there is two parts, first below the email he sent, and after that above the answer he received. I told the person that he didn't give me the true information because the first part of the email is falsified. Please tell me what you think. Thanks a lot. From: abc efg To: Name familyname Date: 2012-03-09 12:14 AM Subject: Lorem ipsum dolor Nam dictum feugiat neque, euismod convallis mi euismod ut. Mauris at vulputate enim. Nunc posuere tortor vitae justo volutpat luctus. Sed ut ligula id magna dictum blandit id vitae erat. Nunc dignissim eleifend vulputate. 2012/3/4 Name familyname Lorem ipsum dolor sit amet, consectetur adipiscing elit. Fusce aliquam ligula in elit blandit porta. Vestibulum facilisis, elit ut aliquam euismod, erat elit tempor mi, et pulvinar velit neque ac nibh. Nullam fringilla viverra erat sed laoreet. Aenean elementum enim ac elit ultricies luctus. Name Adress. Tel. Thanks for your help.

  Read the article

• Will adding a SSD cache device to my ZFS storage improve performance?

  - by Sysadminicus

  The server has 4GB of RAM and my zpool is made up of 15.5k SAS drives arranged like this: NAME STATE READ WRITE CKSUM tank ONLINE 0 0 0 raidz1-0 ONLINE 0 0 0 c0t2d0 ONLINE 0 0 0 c0t3d0 ONLINE 0 0 0 c0t4d0 ONLINE 0 0 0 c0t5d0 ONLINE 0 0 0 c0t6d0 ONLINE 0 0 0 c0t7d0 ONLINE 0 0 0 c0t8d0 ONLINE 0 0 0 raidz1-1 ONLINE 0 0 0 c0t10d0 ONLINE 0 0 0 c0t11d0 ONLINE 0 0 0 c0t12d0 ONLINE 0 0 0 c0t13d0 ONLINE 0 0 0 c0t14d0 ONLINE 0 0 0 spares c0t9d0 AVAIL c0t1d0 AVAIL The primary use is as an NFS store for a couple VMWare ESXi servers. I can't do any "true" benchmarks because this is a production system (no budget for test systems), but using dd and bonnie++ I can't get more than ~40-50MB/s writes and ~70-90MB/s reads. It seems I should be able to do much better, but I'm not sure where to optimize. Based on what I've read, I think dropping in a OCZ Vertex 2 Pro SSD as my L2ARC is going to be the best bang-for-the-buck to improve througput. Is there something else I should be looking into to help performance? If not... How do I know how big a cache device I need? Am I safe with only a single SSD as my cache device?

  Read the article

• cpu load measure with hyperthreading on linux

  - by dronus

  How can I get the true usage of a multicore hyperthreading enabled cpu? For example lets consider a 2 core CPU, expressing 4 virtual cores. A single threaded workload would now show up as 100% in top, as one core of the virtual cores is completely used. The CPU and top work as expected, like there would be 4 real cores. With two threads however, the things get arkward: If all works well, they are balanced to the two real cores, so we got 200% usage: Two times 100% and two idle virtual cores, and are using all of the available CPU power. Seems ok to me. However, if the two threads would run on a single real core, they would show up as using two times 100%, that makes 200% virtual core usage. But on the real side, that would be one core sharing its power on the two threads, which are then using only one half of the total CPU power. So the usage numbers shown by top can not be used to measure the total CPU workload. I also wonder how hyperthreading balances two virtual on a real core. If two threads take a different amount of cycles, would the virtual cores 'adapt' so that both show a 100% load even if the real load differ?

  Read the article

• Where is the TFS database?

  - by Blanthor

  I've been using TFS 2010 with no problems. I tried adding a user and I got the following error message. "TF30063: You are not authorized to access <serverName>\DefaultCollection. -The remote server returned an error: (401) Unauthorized." I remoted into the server, <serverName>, and opened the TFS Console. The logs mentioned a connection string: ConnectionString: Data Source=<serverName>\SS2008;Initial Catalog=Tfs_DefaultCollection;Integrated Security=True While remoted in I open SQL Server 2008 Management Studio opening the (local) server with Windows Authentication. It shows the connection to be (local)(SQL Server 9.04.03 - <serverName>\Admin), and there is no Tfs_DefaultCollection database. Can someone tell me what is going on? Was I wrong in connecting to this instance of the database (i.e. Is the log file the wrong place to find the connection string)? Is the database so corrupted that SQL Manager Studio cannot see it anymore, although TFS could? Should I be logging into Management Studio as user SS2008? btw I don't know of any such credentials.

  Read the article

• Multicast image restoration with adaptive speed

  - by Clinton Blackmore

  I'm curious to know if there are any tools for restoring disk images (or even transferring files) via multicast -- for any platform, especially if the project has source available -- where the multicast rate adjusts itself on the fly. On the Mac, all multicast solutions I am aware of (such as Deploy Studio, and NetRestore before it) make use of multicast ASR (apple software restore), which has one glaring deficiency -- you have to set the multicast speed before you start sending a disk image over the network, and that speed is locked in. Either your clients can keep up and restore, or they can't*. It seems to me that it must be possible for the multicast server to adjust the data rate, so you basically say "start sending this image", clients connect, and, if they can't keep up, they tell the server so it slows down. (Likewise, I'd expect the server to try speeding up if no client is having difficulties keeping up, and I'd expect to be able to cap that maximum throughput so that other network activities can go on without being resource starved.) So, what sort of tools are out there? For Linux? Windows? Is there something for the Mac I've overlooked. [It just kills me that it is true that, by the time you get multicast up and going at a good speed to restore a lab, you could've unicasted the data to all the computers and be done.] * There is a little leeway involved. I think individual clients can say, "I missed a little bit of data" and get it, and they can opt to listen in the next time the image is sent over the network, but on the whole, if they missed it the first go round, you have to image the machine again, and there is no time savings.

  Read the article

• Google respond differently to two identical nginx setups and 200 codes; any ideas?

  - by Yuji Tomita

  I'm rather confused... I have a linode.com VPS which has been cloned recently, so the settings are the same between nginx servers. One lives on a dev subdomain, one on a www. I'm trying to run a google experiment on my live server, which claims: Web server rejects utm_expid. Your server doesn't support added query arguments in URLs. My logs show on the dev server where it works: 74.125.186.32 - - [13/Sep/2012:13:33:45 -0700] "GET /product/iphone-case/?utm_expid=25706866-0 HTTP/1.1" 200 12521 "-" "Google_Analytics_Content_Experiments 74.125.186.32 - - [13/Sep/2012:13:33:45 -0700] "GET /product/iphone-case/?ab_reviews=True&utm_expid=25706866-0 HTTP/1.1" 200 14679 "-" "Google_Analytics_Content_Experiments My production server shows google making a second request. 74.125.186.41 - - [13/Sep/2012:13:34:49 -0700] "GET /product/iphone-case/?ab_reviews=on&utm_expid=25706866-1 HTTP/1.1" 200 12104 "-" "Google_Analytics_Content_Experiments 74.125.186.41 - - [13/Sep/2012:13:34:49 -0700] "GET /product/iphone-case/?utm_expid=25706866-1 HTTP/1.1" 200 12122 "-" "Google_Analytics_Content_Experiments 74.125.186.41 - - [13/Sep/2012:13:34:49 -0700] "GET /product/iphone-case/ <--- A second request for some reason. HTTP/1.1" 200 12522 "-" "Google_Analytics_Content_Experiments I'm not sure how google determines why it needs to send a second request without the querystring. The original request has clearly sent a 200 OK status response. Does anybody have any suggestions where to look next? The HTML (compared by diff) on the two pages is exactly the same.

  Read the article

• Incorrect deployment of WSGI app to AWS using Elastic Beanstalk

  - by Dzmitry Zhaleznichenka

  cross-link to AWS forums I have developed a simple Python web service using WSGI and would like to deploy it to AWS cloud using Elastic Beanstalk. My problem is I cannot make all the options I specify in Elastic Beanstalk configuration to be correctly configured in the cloud. For deployment, I use Elastic Beanstalk CLI utility. I have run eb init command and set up the required parameters. After this, a directory named .elasticbeanstalk was created in my source tree. It has two config files that are used for deployment, namely config and optionsettings. The latter one among the other options contains the WSGI configuration that has to update /etc/httpd/conf.d/wsgi.conf at the instances. After some of my adjustments the file has the following settings: [aws:elasticbeanstalk:application:environment] DJANGO_SETTINGS_MODULE = PARAM1 = PARAM2 = PARAM4 = PARAM3 = PARAM5 = [aws:elasticbeanstalk:container:python] WSGIPath = handler.py NumProcesses = 2 StaticFiles = /static= NumThreads = 10 [aws:elasticbeanstalk:container:python:staticfiles] /static = static/ [aws:elasticbeanstalk:hostmanager] LogPublicationControl = false [aws:autoscaling:launchconfiguration] InstanceType = t1.micro EC2KeyName = zmicier-aws [aws:elasticbeanstalk:application] Application Healthcheck URL = [aws:autoscaling:asg] MaxSize = 10 MinSize = 1 Custom Availability Zones = [aws:elasticbeanstalk:monitoring] Automatically Terminate Unhealthy Instances = true [aws:elasticbeanstalk:sns:topics] Notification Endpoint = Notification Protocol = email It turns out that not all of these options are considered when I start the environment or update it. Thus, when I update NumThreads or NumProcesses, the respective parameters get changed in wsgi.conf as expected. But whatever I write to the WSGIPath and StaticFiles parameters, I'm not able to automatically change the respective values of wsgi.conf, they remain Alias /static /opt/python/current/app/ WSGIScriptAlias / /opt/python/current/app/application.py which drives me nuts. Moreover, when I deploy my application using git aws.push and having the following contents of .ebextensions/python.config file, neither of options I specify in it affects the deployment. option_settings: - namespace: aws:elasticbeanstalk:container:python option_name: WSGIPath value: mysite/wsgi.py - namespace: aws:elasticbeanstalk:container:python option_name: NumProcesses value: 5 - namespace: aws:elasticbeanstalk:container:python option_name: NumThreads value: 25 - namespace: aws:elasticbeanstalk:container:python:staticfiles option_name: /static/ value: app/static/ I wonder what I should do to force AWS use all the parameters I specify in the configuration, namely the WSGI Path and path to my static data.

  Read the article

• Error in Apache: /var/run/apache2 not found

  - by Julen

  This is more self-answered question but since it drove me crazy I would like to share with the community and maybe someone can tell me why it happened or what it caused. The thing is I wanted to install in my Ubuntu 10.4 machine a CGI app, one built in the samples that come with the gSOAP toolkit. My intention was to access those from ASP .NET machine. Regular Ubuntu does not come with Apache so I install it from Sypnatic. Pretty easy. I followed this How to Install Apache2 webserver with PHP,CGI and Perl Support in Ubuntu Server. Instead of apache.conf I tweaked httpd.conf since a college here used that file instead of the first to put his Apache running. Besides I was able to access his CGI from my ASP .NET but mysteriously I could not from mine, I was getting always "The request failed with HTTP status 503: Service Temporarily Unavailable". Checking Apache error.log I found these messages: No such file or directory: unable to connect to cgi daemon after multiple tries: /home/julen/htdocs/cgi-bin/calcserver And looking more carefully whenever I restarted Apache I got this other message No such file or directory: Couldn't bind unix domain socket /var/run/apache2/cgisock. cgid daemon failed to initialize I am pretty new with Ubuntu and I could not think that Apache and Synaptic made a mistake in the installation process of the server, but it is true that the /var/run/apache2 was missing whereas in my college's computer was not. I tried to find and "elegant" solution but I found a post from 2006 that had an slight reference to it. Finally I decided to create the folder myself (as root) and then everything worked fine. Hope this helps others if they encounter a similar problem. Still I have the doubt why the folders was not created in the first place. Best, Julen.

  Read the article

• Git clone/push/pull - where's that username comes from?

  - by Kuroki Kaze

  I've set up gitosis and able to pull/push through ssh. Gitosis is installed on Debian Lenny server, I'm using git from windows machine (msysgit). The strange thing, if I enable loglevel = DEBUG in gitosis.conf, I see something like this when doing any actions with gitosis server: D:\Kaze\source\test-project>git pull origin master DEBUG:gitosis.serve.main:Got command "git-upload-pack 'test_project.git'" DEBUG:gitosis.access.haveAccess:Access check for '[email protected]' as 'writable' on 'test_project.git'... DEBUG:gitosis.access.haveAccess:Stripping .git suffix from 'test_project.git', new value 'test_project' DEBUG:gitosis.group.getMembership:found '[email protected]' in 'test' DEBUG:gitosis.access.haveAccess:Access ok for '[email protected]' as 'writable' on 'test_project' DEBUG:gitosis.access.haveAccess:Using prefix 'repositories' for 'test_project' DEBUG:gitosis.serve.main:Serving git-upload-pack 'repositories/test_project.git' From 192.168.175.128:test_project * branch master -> FETCH_HEAD Already up-to-date. Question is: why am I *[email protected]? This email is in global user.email config variable, too. Yesterday, when the gitosis was installed, it seen me as kaze@KAZE, this is the name under which I was added to gitosis-admin group (and it worked). But today git (or gitosis) started to see me as [email protected]. This is true for all repositories I push or clone. I had to add this address to gitosis.conf directly on server to be able to edit configs again (it worked). There is 2 public keys in keydir: [email protected] and [email protected], their content is identical and they have kaze@KAZE at end. Origin URL looks like git@lennyserver:test_project. Now, the question is - why Git (or gitosis) suddenly decided to call me by email instead of name@machinename? I've changed a couple things trying to set up Gitosis (updated git on server to 1.6.0 for example), but maybe I broke something in my local git installation?

  Read the article

• Extend RAID 1 (HP SmartArray P410i) running Linux

  - by Oliver

  I took over a fairly simple server setup with the following RAID 1 config running Ubuntu 11.10 (Kernel 3.0.0-12-server x86_64): => ctrl all show config Smart Array P410i in Slot 0 (Embedded) (sn: removed) array A (SAS, Unused Space: 1335535 MB) logicaldrive 1 (279.4 GB, RAID 1, OK) physicaldrive 1I:1:1 (port 1I:box 1:bay 1, SAS, 1 TB, OK) physicaldrive 1I:1:2 (port 1I:box 1:bay 2, SAS, 1 TB, OK) Initially there were two 300GB disks that got replaced by 1TB disks and I now have to extend the logical volume to use that extra space. However, when trying to do so I get the following warning: => ctrl slot=0 ld 1 modify size=max Warning: Extension may not be supported on certain operating systems. Performing extension on these operating systems can cause data to become inaccessible. See ACU documentation for details. Continue? (y/n) Is it safe to say yes or am I at risk of corrupting the file system / loosing data? Rearranging and extending the file system afterwards shouldn't be an issue as I can take the server offline and boot from a gparted live disk. Here's the config of the RAID controller in use: => ctrl all show detail Smart Array P410i in Slot 0 (Embedded) Bus Interface: PCI Slot: 0 Serial Number: removed RAID 6 (ADG) Status: Disabled Controller Status: OK Hardware Revision: Rev C Firmware Version: 5.12 Rebuild Priority: Medium Expand Priority: Medium Surface Scan Delay: 15 secs Surface Scan Mode: Idle Wait for Cache Room: Disabled Surface Analysis Inconsistency Notification: Disabled Post Prompt Timeout: 0 secs Cache Board Present: False Drive Write Cache: Disabled SATA NCQ Supported: True And the partition table: Number Start End Size Type File system Flags 1 1049kB 274GB 274GB primary ext4 boot 2 274GB 300GB 25.8GB extended 5 274GB 300GB 25.8GB logical linux-swap(v1)

  Read the article

• Is encryption really needed for having network security? [closed]

  - by Cawas

  I welcome better key-wording here, both on tags and title. I'm trying to conceive a free, open and secure network environment that would work anywhere, from big enterprises to small home networks of just 1 machine. I think since wireless Access Points are the most, if not only, true weak point of a Local Area Network (let's not consider every other security aspect of having internet) there would be basically two points to consider here: Having an open AP for anyone to use the internet through Leaving the whole LAN also open for guests to be able to easily read (only) files on it, and even a place to drop files on Considering these two aspects, once everything is done properly... What's the most secure option between having that, or having just an encrypted password-protected wifi? Of course "both" would seem "more secure". But it shouldn't actually be anything substantial. I've always had the feeling using any kind of the so called "wireless security" methods is actually a bad design. I'm talking mostly about encrypting and pass-phrasing (which are actually two different concepts), since I won't even consider hiding SSID and mac filtering. I understand it's a natural way of thinking. With cable networking nobody can access the network unless they have access to the physical cable, so you're "secure" in the physical way. In a way, encrypting is for wireless what building walls is for the cables. And giving pass-phrases would be adding a door with a key. So, what do you think?

  Read the article

• How to Setup Sharepoint Extranet to authenticate against a dmz AD

  - by Satish

  I have a web app which is extended to extranet for our clients to access. We have setup a different AD server and domain for dmz and clients have to be authenticated against that domain. I'm little confused about the setup especially what all web.config files I have to update. Do I have to update the web.config file for Central admin site and the extended web app. According to this blog I need to do update both, but as soon as I make the changes in the web.config for central admin, central admin site stops working. Here is what I added to the central admin web.config file between /Sharepoint and system.web I have this <connectionStrings> <add name="DMZConnectionString" connectionString= "LDAP://dmz.xxx.com:389/OU=Clients,DC=dmz,DC=xxx,DC=com "/> Between system.web and securityPolicy <membership defaultProvider=”DMZADProvider“> <providers> <add name="DMZADProvider" connectionStringName="DMZConnectionString" connectionUsername="DMZ\ldapUser" connectionPassword="Password" enableSearchMethods="true" attributeMapUsername="userPrincipalName" type="System.Web.Security.ActiveDirectoryMembershipProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" /> </providers> </membership> I know the connectionusername and password works becuase I use the same in SSP for importing profiles. Any idea what might be causing the error?

  Read the article

• Outlook 2007 - Right Click Email > Move To {Folder Name}

  - by HK1

  I know it seems like an elementary question. What's the simplest and fastest way to move a read/completed email to a different folder in Outlook 2007 (connected to Exchange 2007)? I have a particular user that is challenged by technology. Using keyboard shortcuts is not an option. Dragging and dropping things - forget it. And too many clicks is frustrating to him. He keeps his email inbox completely clean (OCD=True) but he does that by deleting every single email as quickly as he's done with it. If an email can't be resolved in a day or two it almost drives him to insanity. As far as he's concerned, there's only one right thing to do with an email - reply to it and then delete it. He's being asked to save emails unless they are clearly trash. I'm trying to figure out what the simplest method is to move an email to a "Saved Emails" or "Archived" folder (don't confuse "folder" with .PST file, that's irrelevant for this discussion). I envisioned that I could possibly hi-jack every delete and put the email in his Saved folder. But I don't like this option because some emails are truly trash and I don't want him saving those. What I'd really like to do is something like this: Right Click Email in List > Move To {Folder Name} Is there a simple way to do this? Maybe someone has another suggestion on how to handle this situation.

  Read the article

< Previous Page | 659 660 661 662 663 664 665 666 667 668 669 670  | Next Page >