Search Results

Search found 20475 results on 819 pages for 'voice control'.

Page 663/819 | < Previous Page | 659 660 661 662 663 664 665 666 667 668 669 670  | Next Page >

  • What characteristic of networking/TCP causes linear relation between TCP activity and latency?

    - by DeLongey
    The core of this problem is that our application uses websockets for real-time interfaces. We are testing our app in a new environment but strangely we're noticing an increasing delay in TCP websocket packets associated with an increase in websocket activity. For example, if one websocket event occurs without any other activity in a 1-minute period, the response from the server is instantaneous. However, if we slowly increase client activity the latency in server response increases with a linear relationship (each packet will take more time to reach the client with more activity). For those wondering this is NOT app-related since our logs show that our server is running and responding to requests in under 100ms as desired. The delay starts once the server processes the request and creates the TCP packet and sends it to the client (and not the other way around). Architecture This new environment runs with a Virtual IP address and uses keepalived on a load balancer to balance the traffic between instances. Two boxes sit behind the balancer and all traffic runs through it. Our host provider manages the balancer and we do not have control over that part of the architecture. Theory Could this somehow be related to something buffering the packets in the new environment? Thanks for your help.

    Read the article

  • Limiting interface bandwidth with tc under Linux

    - by Matt
    I have a linux router which has a 10GBe interface on the outside and bonded Gigabit ethernet interfaces on the inside. We have currently budget for 2GBit/s. If we exceed that rate by more than 5% average for a month then we'll be charged for the whole 10Gbit/s capacity. Quite a step up in dollar terms. So, I want to limit this to 2GBit/s on 10GBe interface. TBF filter might be ideal, but this comment is of concern. On all platforms except for Alpha, it is able to shape up to 1mbit/s of normal traffic with ideal minimal burstiness, sending out data exactly at the configured rates. Should I be using TBF or some other filter to apply this rate to the interface and how would I do it. I don't understand the example given here: Traffic Control HOWTO In particular "Example 9. Creating a 256kbit/s TBF" tc qdisc add dev eth0 handle 1:0 root dsmark indices 1 default_index 0 tc qdisc add dev eth0 handle 2:0 parent 1:0 tbf burst 20480 limit 20480 mtu 1514 rate 32000bps How is the 256K bit/s rate calculated? In this example, 32000bps = 32k bytes per second. Since tc uses bps = bytes per second. I guess burst and limit come into play but how would you go about choosing sensible numbers to reach the desired rate? This is not a mistake. I tested this and it gave a rate close to 256K but not exactly that.

    Read the article

  • PPTP server connection closes - Too much data?

    - by Sebastian Hoitz
    I set up a PPTP server for my company. However, every time I have another computer connected to this server (i.e. our backup server) and a lot of data gets transferred, the connection to this computer closes. In the syslog on the PPTP server I find this message: Apr 22 12:44:34 komola-chase pptpd[2581]: CTRL: Reaping child PPP[2583] Apr 22 12:44:34 komola-chase pppd[2583]: MPPE disabled Apr 22 12:44:34 komola-chase pppd[2583]: Connection terminated. Apr 22 12:44:34 komola-chase pppd[2583]: Exit. Apr 22 12:44:34 komola-chase pptpd[2581]: CTRL: Client 192.168.0.11 control connection finished Apr 22 12:55:11 komola-chase pptpd[2674]: GRE: xmit failed from decaps_hdlc: No buffer space available Apr 22 12:55:11 komola-chase pptpd[2674]: CTRL: PTY read or GRE write failed (pty,gre)=(6,7) Apr 22 12:55:11 komola-chase pppd[2675]: Modem hangup Apr 22 12:55:11 komola-chase pppd[2675]: Connect time 23.0 minutes. Hopefully you can help me as to what is wrong. As far as I can tell, there is no compression enabled on the PPTP server (npbsdcomp option). Thank you!

    Read the article

  • Cannot connect on TFS 2012 server through SSL with invalid certificate

    - by DaveWut
    I saw the problem on some forums and even here, but not as specific as mine. So here's the thing, So I've configured a TFS 2012 server, on one of my personnel server at home, and now, I'm trying to make it available through the internet, with the help of apache2 on a different UNIX based, physical server. The thing is working perfectly, I don't have any problem accessing the address https://tfs.something.com/tfs through my browser. The address can be pinged and I do have access to the TFS control panel through it. How does it work? Well, with apache2 you can set a virtual host and set up the ProxyPass and ProxyPassReserver setting, so the traffic can externally comes from a secure SSL connection, through a specified domain or sub-domain, but it can be locally redirect on a clear http session on a different port. This is my current setup. As I already said, I can access the web interface, but when I'm trying to connect with Visual Studio 2012, it can't be done. Here's the error I receive: http://i.imgur.com/TLQIn.png The technical information tells me: The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel. My SSL certificate is invalid and was automatically generated on my UNIX server. Even if I try to add it in the Trusted Root Certification Authorities either on my TFS server or on my local workstation, it doesn't work. I still receive the same error. Is there's a way to completely ignore certificate validation? If not, what's have I done? I mean, I've added the certificate in the trusted root certificates, it should works as mentioned on some forums... If you need more information, please ask me, I'll be pleased to provide you more. Dave

    Read the article

  • LAN->LAN IP translation (for TortoiseSVN + Artifacts + Buffalo router)

    - by Armchair Bronco
    Here's my scenario: I've got a VisualSVN server on my main dev box @ home. I'm also using Visual Studio 2010, TortoiseSVN, VisualSVN client (for source control), and Versioned 'Artifacts' (for bug tracking). (I had to modify the fake URL's below to use only one slash because as a new user, I can't post more than one real URL.) I've got my Buffalo AirStation WHR-HP-G300N router properly configured so my business partner can connect to the SVN server. I have port forwarding enabled for the internet-side IP address (like http:/99.888.77.66:443) which gets forwarded to an internal IP (like 192.168.11.6). This part is working great. The problem I'm having is with the integration piece between TortoiseSVN and my bug tracking system. I need to provide a bugtraq:url property, but I haven't been able to get relative paths to work. So I'm forced to use an absolute URL. On my end, I need to use the name of my server (for example: bugtraq:url = https:/my-server/svn/bla..), but this doesn't work for my partner. He needs to specify the IP address (for example: bugtraq:url = https:/999.888.77.66:443/svn/bla...) Is there a way to configure my router such that the IP address for this parameter gets re-routed/re-mapped to "https://my-server" if the request originates from the LAN itself? My router's software supports LAN-Internet and Internet-LAN, but I don't see LAN-LAN.

    Read the article

  • How can I bridge a VM to a remote network?

    - by asciiphil
    I have a system running QEMU/KVM (via libvirt). One of its VMs needs to have a presence on a subnet that is not local to the VM host. I have a Linux system on the remote subnet. Is there a way to set up some sort of tunneled bridge to cause the VM to appear present on the remote system? This will be a temporary situation (hopefully just until the VM owner can configure their system) and network performance and long-term maintainability aren't really issues. To give some more concrete information: My VM host has IP address 192.168.54.155/24. The VM has IP address 192.168.65.71/24. I have a remote system at 192.168.65.254/24. Both the VM host and remote system are running Scientific Linux 6.5. I do not control the network or routing in between the VM host and remote system. I do not have access to the guest OS on the VM. I would like traffic to the VM's IP address to end up at the VM even though its host isn't directly connected to the appropriate network. I've tried using iproute2's tunnelling, but Linux won't let me add a tunnel to a bridge. I've considered using some sort of iptables mangling to route traffic over the tunnel and make the VM think it's on the right network, but I'm not sure whether there are better approaches. What's the best way to accomplish this hack?

    Read the article

  • Getting a TTY in a Connectback Shell

    - by Asad R.
    I'm often asked by friends to help with small Linux problems, and more often than not I'm required to login to the remote system. Usually there are a lot of issues with making an account and logging in (sometimes the box is behind a NAT device, sometimes SSHD isn't installed, etc.) so I usually just ask them to make a connect-back shell using netcat (nc -e /bin/bash ). If they don't have netcat I can just ask them to grab a copy of a statically compiled binary which isn't that hard or time consuming to download and run. Though this works well enough for me to enter simple commands, I can't run any apps that require a tty (vi, for example) and can't use any job control functions. I managed to bypass this issue by running in.telnetd with a few arguments within the connect-back shell that would assign me a terminal and drop me to a shell. Unfortunately in.telnetd isn't usually installed by default on most systems. What's the easiest way to get a fully functional connect-back terminal shell without requiring any non-standard packages? (A small C program that does the job would be fine as well, I just can't seem to find much documentation on how a TTY is assigned/allocated. A solution that doesn't require me to plough through the source code for SSHD and TELNETD would be nice :))

    Read the article

  • Computer loses all installed programs and appears to return OS-only state

    - by Jake
    This is a story regarding 3 laptops of different brand and models. On separate occassions, I configured each of these Windows 7 / Vista computers with the necessary configuration and applications (which are supposedly the same actually), e.g. join office domain, same windows updates, microft office etc. These machinese were configure in our office in Singapore, and then they were taken to India for use. Someday in India, when booting up the laptop, all went fine except when it reach the log in screen, it was no longer possible to login with domain credentials. Logging into the laptop local admin account will lead to discover that the machine has returned to "OS-only state". All the configurations and applications were gone. The actual user profiles are still in the C: drive so files can still be retrieved, but under Control Panel Uninstall Programs it is evident that at least the registry is corrupted. The above scenario happen to the first 2 laptops. For the third, the system reports "Operating System Not Found" on boot up. I cannot think of any reason except to suspect a power fluctuation issue. Question is, will a power issue create this behaviour? What else can cause this issue?

    Read the article

  • On a failing hard drive, I am able to view data but unable to copy it - why?

    - by Tom
    I have a 2.5" external hard drive that is failing. It's not making the expected 'clicking' noise that most hard drives and I am able to view the data, but I am unable to actually retrieve the data. I attempted to use SpinRite in order to access the data on the drive, but it didn't like the external drive. When I view the drive's property page, the drive shows that it's used space is at 100% and that it has 0 bytes available; however, the progress indicator under the drive icon in Windows Explorer shows that it's roughly 50% full (which is correct). When I attempt to run Windows' "Error Checking" tool and attempt to "scan for an attempt recovery of bad sectors," the tool begins to run then immediately closes with no error message. I am able to browse the contents of the drive using Windows Explorer. When I begin to try copying any given single file, the copy process begins, an indicator starts, and then the copy fails with no real error message. The Disk Management page in Computer Management under Control Panel also shows this drive has being 'Healthy.' I dropped the drive off at a data recovery store and they said that "The data seems to be intact, but an internal failure is preventing any information from being retrieved." They offered to provide me references to a data recovery specialist. I've also attempted to run CHKDSK on the drive (with and without arguments) but it returns the following error: The type of the filesystem is RAW. CHKDSK is not available for RAW drives. Before going the route of more expensive data recovery, I'm wondering if these symptoms sound familiar to anyone? Other questions... I'm willing to continue trying tools such as TestDisk and/or PhotoRec (as the majority of the data that I'd like to salvage are photos) but how long I should expect either tool to run given approximately 400GB of data? I'm also comfortable using Linux so I welcome any suggestions for utilities or tools and strategies with which you've had success.

    Read the article

  • DFS replication and the SYSTEM user (NTFS permissions)

    - by HopelessN00b
    Question for which I'm having trouble finding an answer on Google or Technet... Does granting the SYSTEM user permissions to DFS-shared files and folders have any effect on DFS replication? (And while we're at it, is there any good reason not to let SYSTEM have permissions to DFS-shared files?) It comes up because I have a collection of DFS namespaces and folders that I'm not able to make someone else's problem, and while troubleshooting a problem where one DFS replica just wasn't replicating with another for no discernible reason, I observed that the SYSTEM didn't have any permissions granted to any of the files or folders in the folder in question. So I set SYSTEM to have full control and propagated it down, and our DFS health diagnostic reports went from showing a backlog of ~80 files to a backlog of ~100,000... and things started replicating, including a number of files that had been missing on one server or the other (so more than just the permissions changes started replicating). Naturally, this made me curious as to whether or not DFS needs the SYSTEM account to have permissions to do its work, or if perhaps it was just any change to folder tree in question that prompted DFS to jump into action. If it matters, our DFS namespaces were set up under 2000/2003, and I have just recently finished upgrading all the servers to 2008 R2 or 2012 (with UAC enabled, blech), but have not yet gotten around to raising the DFS namespace functional levels to Server 2008. (And bonus points if anyone has an official Microsoft article on NTFS file permissions and the SYSTEM account as it pertains to DFS or network files.)

    Read the article

  • Throttle CPU Usage consumed by Process

    - by Brett Powell
    We run a game-server company where we basically have large amounts of customers sharing a single machine, and are just on their own instance of a Java Process (Minecraft) managed by our Web Control Panels. In the last few game updates released, we have noticed that many of the third-party plugins our customer's use have become poorly written and we are frequently seeing huge CPU increases from certain servers until we manually kill the process. Our Game Panel automatically restarts processes, so killing them is not really an issue. Our problem is that once once of these servers starts consuming 50%+ CPU Usage, it takes atleast 5 minutes to RDP into the machine, locate who it belongs to, shut it down and notify them. Are there any current solutions for Server 2008 which allow for the throttling of CPU usage or worst case, just auto kill a process stuck using that much? As Minecraft is essentially a single-threaded application, we have investigated using Affinity, although with the variations in our Packages and fluctuations in usage, this doesn't work well for us. Some option to throttle the maximum usage a process can use would be perfect, or at least the option to kill a process using that much. Thanks!

    Read the article

  • Trying to use Nginx try_files to emulate Apache MultiViews

    - by Samuel Bierwagen
    I want a request to http://example.com/foobar to return http://example.com/foobar.jpg. (Or .gif, .html, .whatever) This is trivial to do with Apache MultiViews, and it seems like it would be equally easy in Nginx. This question seems to imply that it'd be easy as try_files $uri $uri/ index.php; in the location block, but that doesn't work. try_files $uri $uri/ =404; doesn't work, nor does try_files $uri =404; or try_files $uri.* =404; Moving it between my location / { block and the regexp which matches images has no effect. Crucially, try_files $uri.jpg =404; does work, but only for .jpg files, and it throws a configuration error if I use more than one try_files rule in a location block! The current server { block: server { listen 80; server_name example.org www.example.org; access_log /var/log/nginx/vhosts.access.log; root /srv/www/vhosts/example; location / { root /srv/www/vhosts/example; } location ~* \.(?:ico|css|js|gif|jpe?g|es|png)$ { expires max; add_header Cache-Control public; try_files $uri =404; } } Nginx version is 1.1.14.

    Read the article

  • How do I get a Mac to request a new IP address from another DHCP server running in parallel while Ne

    - by huyqt
    Hello, I have an interesting situation. I'm trying to us a Linux based machine to allow Mac's to Netboot (similiar to PXE boot) by running a DHCP service in parallel with the "global" DHCP server. The local DHCP server hands out IPs in a private subnet, e.g., 10.168.0.10-10.168.254-254, while the "global" DHCP server hands out IPs from the IP range 10.0.0.1 - 10.0.1.254. The local DHCP range is only supposed to be used in Preboot Execution Environment and Netboot. The local DHCP server is something I have control over, but I do not have access to the global DHCP server. I have a filter to only allow members with the vendor strings "AAPLBSDPC/i386" and "PXEClient". PXE works fine, but Netboot has a quirk. The Apple systems that haven't been connected to the network yet can Netboot fine. But once it grabs a "real" IP address from the global DHCP server, it will "save" it and request it the next time we want it to netboot (which the local dhcp server won't give it). This is what I want: Mar 30 10:52:28 dev01 dhcpd: DHCPDISCOVER from 34:15:xx:xx:xx:xx via eth1 Mar 30 10:52:29 dev01 dhcpd: DHCPOFFER on 10.168.222.46 to 34:15:xx:xx:xx:xx via eth1 Mar 30 10:52:31 dev01 dhcpd: DHCPREQUEST for 10.168.222.46 (10.168.0.1) from 34:15:xx:xx:xx:xx via eth1 Mar 30 10:52:31 dev01 dhcpd: DHCPACK on 10.168.222.46 to 34:15:xx:xx:xx:xx via eth1 Mar 30 10:52:32 dev01 in.tftpd[5890]: tftp: client does not accept options Mar 30 10:52:53 dev01 in.tftpd[5891]: tftp: client does not accept options Mar 30 10:52:53 dev01 in.tftpd[5893]: tftp: client does not accept options Mar 30 10:52:54 dev01 in.tftpd[5895]: tftp: client does not accept options This is what I get when it already has a "stored" IP: Mar 30 10:51:29 dev01 dhcpd: DHCPDISCOVER from 00:25:xx:xx:xx:xx via eth1 Mar 30 10:51:30 dev01 dhcpd: DHCPOFFER on 10.168.222.45 to 00:25:xx:xx:xx:xx via eth1 Mar 30 10:51:31 dev01 dhcpd: DHCPREQUEST for 10.0.0.61 (10.0.0.1) from 00:25:xx:xx:xx:xx via eth1: ignored (not authoritative). Do you have any suggestions? It would be much appreciated.

    Read the article

  • How do i tell if my drivers are up to date on Acer?

    - by joe
    Hoping some kind souls can help me out ? I got a blue screen the other day after trying to load sandboxie. So its obviously conflicting with something. I checked if my drivers were up to date on my acer aspire one AOD270 on this intel based site; http://www.drivermanager.com/en/down...tel&Logo=intel Its showing i have 2 drivers that need updating ; Intel NM10 Express chipset and the Realtek PCIE Cardreader. I have no idea whether to do the update via the Intel Driver update site or the Acer drivers download page? I then ran Bluescreenview and on the dump file its showing ; ''caused by driver'' igdkmd32.sys ''file description'' Intel (R) WDDM Kernel mode driver ''product name''Intel Graphics Accelerator Drivers for Windows 7(R) I bought the laptop here in SE Asia about a year ago. The ''HOT!! NEW download tool'' on the acer drivers site (below) doesnt seem to work and the info about removing and installing drivers is limited. Not sure what to trust on non acer/manufacturer sites. http://support.acer.com/us/en/produc...1&modelId=4040 I've located the igdkmd32.sys file inside the INTEL GRAPHICS MEDIA ACCELERATOR 3600 SERIES 8.14.8.1064. When i click on ''update driver'' in control panel it searches and says its up to date. In windows maintenance it says this intel had a problem, but no solution. For all i know my drivers could be up to date and its something else. Can anybody advise a dummy step by step the process i should follow ? I've never done this before. eg do i delete the old driver first and then download the new one.how much of a problem i could cause by downloading this type of thing wrongly? As yet i havent downloaded any drivers. I've asked on other forums but no luck as yet. Thanks for any help!

    Read the article

  • Issues with duplicating TFS 2005 to a virtual server

    - by Hitchhiker
    We have a problem with our current TFS installation. For some reason, which I won't get into, the Sharepoint DBs (sts_content, sts_config) were upgraded to WSS 3 (MOSS). So now, none of our team-project sites work, we have no access to our documents and can't create new team projects. We can still work with the version control, though. We wanted to "play" with the server and try to fix it, without affecting the users. So we used p2v for VmWare, to duplicate the server to a virtual one. We now continued and changed all of the relevant configuration to point to the new server, as explained in the MSDN article. The step of rebuilding the warehouse (with setupwarehouse) failed. Also, we can't access the VersionControl web service (ourserver:8080/VersionControl/v1.0/repository.asmx). We are seeing errors in the EventLog: TF53002: Unable to obtain registration data for application Build. TF53005: Unable to retrieve the Team Foundation Server installed UI culture. TF53002: Unable to obtain registration data for application VersionControl. TF30040: The database is not correctly configured. Contact your Team Foundation Server administrator. The solutions suggested in this blog post did not assist. So now we're kind of stuck. Any assistance will be appreciated.

    Read the article

  • Windows Vista: Screen remains darkened for 30-60 seconds *after* UAC prompt

    - by sf2k
    Fixing someone's Vista computer. Process: I click any program or process that opens a User Account Control prompt. Screen goes dim so you may hit Continue to perform a secure user action. I click Continue Screen goes black for 30 seconds to 1 minute while you wait for the screen to return. In another example I click Cancel and screen still then goes black for 30 seconds to a minute. In that timeframe a chime goes off while you wait. (No chime if it was being cancelled.) Then screen comes back to continue with whatever. Something is occurring after the UAC prompt. Considering everything is practically a UAC acceptance this can get pretty annoying pretty quickly. Laptop has external monitor to regular external plug. Works fine. Laptop also has USB IOGEAR additional external video card. This is problematic but when unplugged same above behaviour occurs. I've ruled out monitor interference since same blackout after the UAC prompt appears with external monitors plugged in or when rebooted with no external monitors. Any suggestions on how to address this problem?

    Read the article

  • Cannot set up dual monitors correctly in Fedora15 with KDE.

    - by adivasile
    I have 2 monitors: 24" LCD connected via DVI(primary) 19" LCD connected via VGA(secondary) Everytime Fedora starts the second display is always set to clone the first one and they both run at 1280x1024 and I always have to disable the 19" monitor, in order for the bigger one to run at 1920x1080. I want to set them up so that my secondary monitor extends the primary one.The problem is that no matter what kind of configuration I choose it has no effect.My secondary monitor remains disabled. I've tried using both the Display manager from KDE and the ATI Control Panel and the behaviour is always the same.The moment I click apply, the screen flickers and nothing changes. I've succesfully used the extended setup in Fedora15 with Gnome3. I have a RadeonHD 4300 series videocard and I'm using the drivers downloaded from the AMD site. This is the output of xrandr -q : Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 1920 x 1920 VGA-0 connected (normal left inverted right x axis y axis) 1280x1024 75.0 60.0 1280x960 60.0 1152x864 75.0 1024x768 75.0 70.1 66.0 60.0 832x624 74.6 800x600 72.2 75.0 60.3 56.2 640x480 75.0 72.8 66.7 59.9 720x400 70.1 DVI-0 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 477mm x 268mm 1920x1080 60.0*+ 60.0 1680x1050 59.9 1600x900 60.0 1280x1024 75.0 60.0 1280x960 60.0 1152x864 75.0 1280x720 60.0 1152x720 60.0 1024x768 75.0 60.0 832x624 74.6 800x600 75.0 60.3 640x480 75.0 59.9 720x400 70.1 Later edit: The problem seems to come from the ATI drivers.I managed to set up the monitors like I wanted after I uninstalled the drivers. Unfortunately I'm working on an OpenCL project so I had to reinstall them.The moment I did that, all my previous settings were forgotten and I was back to square one.

    Read the article

  • Windows 7 Not Recognizing Camera Nor iPhone as Camera

    - by taudep
    I've been struggling with this one for a few days. I've recently upgraded an older computer to Windows 7 Home Premium. Neither my digital camera (A Canon SD1200IS) nor iPhone are ever detected as cameras, nor ever show up as accessable in Explorer. With the Canon camera, no driver is required. It's supposed to work with the default Windows 7 drivers. However, in the Control Panel's Device Manager, I'm always seeing a yellow icon next to the "Canon Digital Camera" device. I've uninstalled the device and let Windows attempt to reinstall, but it can never find a driver to install. With the iPhone, it's very similar. One big difference, though, is that iTunes can see the iPhone and back it up, etc. However, again when I go to the Device Manager, there's a yellow icon next to the iPhone. I've uninstalled iTunes, reinstalled, rebooted, deleted drivers, and let Window try to reinstall the driver, but it can never find the driver. So there seems to be some correlation that my machine can't detect cameras properly, and that it might be even a lower-level type of driver I'm struggling with. I know that USB however, does work, because I have have an external drive hooked into the machine. I've gone through the web and tried two hours worth of fixes, without success. I feel like if I can get the Canon camera detected, then the iPhone will be on it's way to being fixed too. BTW, I couldn't really find anything of use in the Event viewer. Any and all suggestions welcome.

    Read the article

  • Why does the file date always change to the current date?

    - by Marshall
    We are a programming shop, but this i snot a programming question. My boss has put an external HD on the network. It contains the 'home' folders for users on the network. He uses it to place VB projects that he wants me to work on. But no matter what date and time he places a project on the drive, the file dates(modified) always shows the current date, though nothing in the files have changed. It makes it very hard to confirm that he has given me the latest versions. (He is not a fan of version control and nothing I do will convince him different.) Any ideas why this happens and how to prevent it from happening? P.S. As I wrote this I decided to add the last accessed date to the file display, and those dates happen to show the dates I expect to see. Why is the modified date getting changed, but not the accessed date. Does the accessed date change only when the files are opened or read, changed or not? Note: I use Directory Opus 9, a replacement for windows file browser. Thanks, Marshall

    Read the article

  • Second ip address on same interface CentOS 6.3

    - by user16081
    I tried to add a second LAN addresses in CentOS 6.3 on a brand new install and it's not working. I installed a new copy of CentOS 5.7 and tried the same and it worked right away. Now I'm just trying to setup the alias on the same subnet and it's not working. what am i doing wrong, is this not possible on CentOS 6.3? second ip address on the same interface but on a different subnet CentOS 5.7 it works: DEVICE=eth0 BOOTPROTO=static BROADCAST=192.168.0.255 HWADDR=00:0C:29:01:6F:89 IPADDR=192.168.0.167 NETMASK=255.255.255.0 NETWORK=192.168.0.0 ONBOOT=yes DEVICE=eth0:0 BOOTPROTO=static BROADCAST=192.168.0.255 HWADDR=00:0C:29:01:6F:89 IPADDR=192.168.0.166 NETMASK=255.255.255.0 NETWORK=192.168.0.0 ONBOOT=yes On CentOS 6.3: does not work DEVICE=eth0 BOOTPROTO=static BROADCAST=192.168.0.255 HWADDR=00:0C:29:1E:DE:86 IPADDR=192.168.0.242 NETMASK=255.255.255.0 NETWORK=192.168.0.0 GATEWAY=192.168.0.1 ONBOOT=yes DNS1=205.134.232.138 DNS2=4.4.4.4 DEVICE=eth0:0 BOOTPROTO=static BROADCAST=192.168.0.255 HWADDR=00:0C:29:1E:DE:86 IPADDR=192.168.0.240 NETMASK=255.255.255.0 NETWORK=192.168.0.0 ONBOOT=yes # /etc/init.d/network restart Shutting down interface eth0: Device state: 3 (disconnected) [ OK ] Shutting down loopback interface: [ OK ] Bringing up loopback interface: [ OK Bringing up interface eth0: Active connection state: activated Active connection path: /org/freedesktop/NetworkManager/ActiveConnection/3 [ OK ] # ping 192.168.0.240 PING 192.168.0.240 (192.168.0.240) 56(84) bytes of data. From 192.168.0.242 icmp_seq=2 Destination Host Unreachable Appreciate any advice, thanks Update: Perhaps this is relevant? On CentOS 5.7: # dmesg |grep eth eth0: registered as PCnet/PCI II 79C970A eth0: link up eth0: link up On 6.3: # dmesg | grep eth e1000 0000:02:00.0: eth0: (PCI:66MHz:32-bit) 00:0c:29:1e:de:86 e1000 0000:02:00.0: eth0: Intel(R) PRO/1000 Network Connection e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None 8021q: adding VLAN 0 to HW filter on device eth0 eth0: no IPv6 routers present

    Read the article

  • Symantec Endpoint Protection Virus Definitions

    - by Gus Denton
    I have done some Googling but I cannot get a definitive answer certainly not from the Symantec KB. I have a Virtualised Win 2003R2 server 32bit. It has been provisioned to me with Symantec Endpoint Protection 11.0.62xxx CLIENT (not a definitions server) the directory C:\Program Files\Common Files\Symantec Shared\VirusDefs is 750MB IT doesn't contain .tmp directories so it is NOT a corrupt definitions server. IT does contain directories named with a date pattern YYYYMMDD.xxx Some of these folders are 12 months old and I would like to recover the space. The sysmantect forums are full of this stuff but a lot of the postings contain links back to documents that are not specific to End Point Protection Client. It appears that I should be able to delete the older folders and all will be OK. with a service restart however there is a warning about having Live Update Administrator Installed Firstly I have no idea if I have this installed how to I check and secondly can I just ditch these old files and restart ? Regards Gus Denton Learning and Teaching Uni of New South Wales Sydney Australia For those trying to assist me I thankyou. I have followed some instructions found on the Symantec site and assumed that the response from Nixphoe would resolve my issue. It appears that as I am on a provisioned VM from a central IT unit I cannot run the Symantec commands from the Run prompt as my admin creds to get me in. (smc -stop) Basically I need to claw back some Diskspace from the c: drive which is being filed up with WSUS patches and Symantec files. I have managed to delete one symantec cache through the live update control panel and recovered 470Mb I suppose my last question for those more experienced than myself is, can I simply remove say the two oldest virus definition folders without completely foobaring the End Point protection and the server ? Regards Gus

    Read the article

  • Get Squid to pass X-Requested-With header

    - by tftd
    I have configured a squid 3.1 proxy server. Everything works great except for the X-Requested-With header. I can't manage to figure out how to pass that header to the site I'm attempting to open via the proxy. This is my current configuration: request_header_access Allow allow all request_header_access Authorization allow all request_header_access WWW-Authenticate allow all request_header_access Proxy-Authorization allow all request_header_access Proxy-Authenticate allow all request_header_access Cache-Control allow all request_header_access Content-Encoding allow all request_header_access Content-Length allow all request_header_access Content-Type allow all request_header_access Date allow all request_header_access Expires allow all request_header_access Host allow all request_header_access If-Modified-Since allow all request_header_access Last-Modified allow all request_header_access Location allow all request_header_access Pragma allow all request_header_access Accept allow all request_header_access Accept-Charset allow all request_header_access Accept-Encoding allow all request_header_access Accept-Language allow all request_header_access Content-Language allow all request_header_access Cookie allow all request_header_access Mime-Version allow all request_header_access Retry-After allow all request_header_access Title allow all request_header_access Connection allow all request_header_access User-Agent allow all request_header_access All deny all #remove all other headers # delete "x-forwarder-for.." headers forwarded_for delete request_header_access Via deny all request_header_access X-Forwarded-For deny all I tried to add this line request_header_access X-Requested-With allow all to the configuration but apparently X-Requested-With is an unknown header name... Apparently I'm missing something?

    Read the article

  • Launch synergy client on boot in Mac OS X

    - by Herms
    I have a mac as a secondary machine at work. Currently I use synergy on my main machine to share its keyboard and mouse with the mac. I created a launch agent for my user to launch synergy when I log in, and that's working. However, this means I still have to pull out the mac's keyboard and mouse in order to log in. I tried making a user daemon so that it would launch on boot, but I get the following errors in the console: LaunchSynergy[52] Tue Jul 14 12:41:44 testmacpro.local synergyc[52] <Warning>: 3891612: (CGSLookupServerRootPort) Untrusted apps are not allowed to connect to or launch Window Server before login. LaunchSynergy[52] Tue Jul 14 12:41:44 testmacpro.local synergyc[52] <Error>: kCGErrorRangeCheck : On-demand launch of the Window Server is allowed for root user only. LaunchSynergy[52] Tue Jul 14 12:41:44 testmacpro.local synergyc[52] <Error>: kCGErrorRangeCheck : Set a breakpoint at CGErrorBreakpoint() to catch errors as they are returned LaunchSynergy[52] _RegisterApplication(), FAILED TO establish the default connection to the WindowServer, _CGSDefaultConnection() is NULL. Is there a way to get this to work? Looks like the Mac's security doesn't want to allow anything to take control of the window while at the login screen. I can understand that, but I'd like a way to override it, as it would make my life a lot easier.

    Read the article

  • How can I restore my original IME Romaji input settings?

    - by JOhn K
    the this one, Japanese IME on Windows: switch back to romaji input method (3) did not help. The problem seems the same. My Vista home premium version PC, I had been using Microsoft IME to use English and Japanese input using romaji henkan for a long time. One day, all of a sudden, first when I started up the PC, it has cap lock indicator ON. So, I press SHIFT key, CAP lock indicator is off!(This I have to do every morning.) Now when I want to type romaji input to change to Japanese, I switch EN English (United States) to "JP Japanese (Japan) and select input to hiragana input. It worked until that day. But now when I set to input romaji for hiragana as I used to do and start typing, then it shows Japanese hiragana directly on the display just as keyboard setting as Japanese ???109???????? as shown in Wikipedia JIS keyboard. And I cannot show hiragana as I wanted ( I can convert to Kanji OK) etc. by hitting space key. But its key board arrangement is what I never learned. Other thing I found is when I hit "`" key, it switches between hiragana and alphabet. When I see Control panel setting it is the same setting as I have seen. Please suggest me a solution to get the original setting for IME input mode as I used to do. John K.

    Read the article

  • How to balance the root domain using NS records?

    - by Patrick McCurley
    I have two load balancers that balance incoming traffic across multiple data centers. These work fine. I can test them out by doing an 'nslookup mydomain.com xIP' I have now taken out DNS services with DYN.com to allow me to manage the DNS Zone file so that typing mydomain.com will ask my load balancers what the IP address is to resolve. Step 1 : the NS record for www. I set up A records (glue) for ns1 & ns2, then the corresponding NS record to delegate the DNS lookup to the balancers instead of DYN.com's nameservers. ns1.mydomain.com A [ip address of load balancer 1] ns2.mydomain.com A [ip address of load balancer 1] www.mydomain.com NS ns1.mydomain.com www.mydomain.com NS ns2.mydomain.com All is well - when I type www.mydomain.com, the requests get delegated to my load balancers who provide the IP address of the endpoint and the connect is made successfully. Step 2 : the NS record for root. This is where I run into problems. I need customers to be able to type 'mydomain.com' (without the www) and ALSO get delegated to the load balancers for the IP address. However - of the research I have done, and through the DYN control panel, it seems to be not allowed to provide an NS record for the root - as this overrides the default NS servers. How can i delegate both the root, and the www. to my load balancers?

    Read the article

< Previous Page | 659 660 661 662 663 664 665 666 667 668 669 670  | Next Page >