Search Results

Search found 18424 results on 737 pages for 'load balance'.

Page 667/737 | < Previous Page | 663 664 665 666 667 668 669 670 671 672 673 674  | Next Page >

• Server 2008/Windows 7/Samba Unspecified error 80004005

  - by ancillary

  I have a Samba share on a LAN with 2008 PDC/DNS. Smb authenticates with AD and I have several Win7 Machines that can connect fine. I recently added a couple of new computers to the LAN which were imaged the same way (same software, etc.; different hardware so different drivers) as the other machines and they have the same policies set. I can not get the new machines to connect to the samba share no matter what. I am always met with either Unspecified Error 0x80004005 or Network Path not found. I've turned off the firewall; set LANMAN auth to respond to NTLM only/send LM & NTLM responses/use NTLM session security if negotiated in Local Sec Policy SEcurity Options; tried both ip and hostname to connect. SMB log shows that authentication succeeds; but then connection is immediately killed by the client. tcpdump shows nothing remarkable except that when trying to connect from the client via hostname there is an unknown packet type error: ack 201 win 255 NBT Session Packet: Unknown packet type 0xABData: (41 bytes) Here's a couple of lines from that error: 11:18:37.964991 IP 001-client.domain.local.49372 > smb.domain.local.netbios-ssn: P 1670:2146(476) ack 201 win 255 NBT Session Packet: Unknown packet type 0xABData: (41 bytes) [000] AA 46 96 FA D5 99 33 75 0C C4 20 CE 26 42 F3 61 \252F\226\372\325\2313u \014\304 \316&B\363a [010] F0 8C FB 65 18 17 40 A5 DB 42 BB 94 37 53 92 EC \360\214\373e\030\027@\245 \333B\273\2247S\222\354 [020] 55 98 7F C4 AE 3D 6B 10 C4 U\230\177\304\256=k\020 \304 11:18:37.964998 IP smb.domain.local.netbios-ssn > 001-client.domain.local.49372: . ack 2146 win 100 Here's smb.conf just in case (though don't see how if other machines are working fine): [global] workgroup = MYDOMAIN realm = MYDOMAIN.LOCAL server string = domain|smb share interfaces = eth1 security = ADS password server = 192.168.1.3 log level = 2 log file = /var/log/samba/%m.log smb ports = 139 strict locking = no load printers = No local master = No domain master = No wins server = 192.168.1.3 wins support = Yes idmap uid = 500-10000000 idmap gid = 500-10000000 winbind separator = + winbind enum users = Yes winbind enum groups = Yes winbind use default domain = Yes [samba-share1] comment = SMB Share path = /home/share/smb/ valid users = @"MYDOMAIN+Domain Users" admin users = @"MYDOMAIN+Domain Admins" guest ok = no read only = No create mask = 0765 force directory mode = 0777 Any ideas what else I could try or look for? Or what might be the problem? Thanks.

  Read the article

• How much did it cost our competitor to DDoS us at 50 Gbps for two weeks?

  - by MiniQuark

  I know that this question may sound like an invalid serverfault question, but I believe that it's quite valid: the amount of time and effort that a sysadmin should spend on DDoS protection is a direct function of typical DDoS prices. Let me rephrase this: protecting a web site against small attacks is one thing, but resisting 50 Gbps of UDP flood is another and requires time & money. Deciding whether or not to spend that time & money depends on whether such an attack is likely or not, and this in turn depends on how cheap and simple such an attack is for the attacker. So here's the full story: our company has been victim to a massive DDoS attack (over 50 Gbps of UDP traffic, full-time during 2 weeks). We are pretty sure that it's one of our competitors, and we actually know which one, because we were the only two remaining competitors on a very big request for proposal, and the DDoS attack magically stopped the day we won (double hurray, by the way)! These people have proved in the past that they are very dishonest, but we know that they are not technical at all, so we believe that they simply paid for some botnet DDoS service. I would like to know how much these services typically cost, for such a large scale attack. Please do not give any link to such services, I would really hate to give these people any publicity. I understand that a hacker could very well do this for free, but what's a typical price for such an attack if our competitors paid for it through some kind of botnet service? It is really starting to scare me (if we're talking thousands of dollars here, then I am really going to freak off: who knows, they might just hire a hit-man one day?). Of course we filed a complaint, but the police says that they cannot do much about it (DDoS attacks are virtually untraceable, so they say), and our suspicions are not enough to justify them raiding our competitor's offices to search for proofs. For your information, we now changed our infrastructure to be able to sustain such attacks: we now use a major CDN service so that our servers are not directly affected by DDoS attacks. Requests for dynamic pages do get proxied to our servers, but for low level attacks (UDP flood, or Syn floods, for example) we only receive legitimate trafic, so we're fine. If they decide to launch higher level attacks (HTTP flood or slowloris attacks for example), most of the load should be handled by the CDN... at least I hope so! Thank you very much for your help.

  Read the article

• Cannot install grub to RAID1 (md0)

  - by Andrew Answer

  I have a RAID1 array on my Ubuntu 12.04 LTS and my /sda HDD has been replaced several days ago. I use this commands to replace: # go to superuser sudo bash # see RAID state mdadm -Q -D /dev/md0 # State should be "clean, degraded" # remove broken disk from RAID mdadm /dev/md0 --fail /dev/sda1 mdadm /dev/md0 --remove /dev/sda1 # see partitions fdisk -l # shutdown computer shutdown now # physically replace old disk by new # start system again # see partitions fdisk -l # copy partitions from sdb to sda sfdisk -d /dev/sdb | sfdisk /dev/sda # recreate id for sda sfdisk --change-id /dev/sda 1 fd # add sda1 to RAID mdadm /dev/md0 --add /dev/sda1 # see RAID state mdadm -Q -D /dev/md0 # State should be "clean, degraded, recovering" # to see status you can use cat /proc/mdstat This is the my mdadm output after sync: /dev/md0: Version : 0.90 Creation Time : Wed Feb 17 16:18:25 2010 Raid Level : raid1 Array Size : 470455360 (448.66 GiB 481.75 GB) Used Dev Size : 470455360 (448.66 GiB 481.75 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 0 Persistence : Superblock is persistent Update Time : Thu Nov 1 15:19:31 2012 State : clean Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 UUID : 92e6ff4e:ed3ab4bf:fee5eb6c:d9b9cb11 Events : 0.11049560 Number Major Minor RaidDevice State 0 8 1 0 active sync /dev/sda1 1 8 17 1 active sync /dev/sdb1 After bebuilding completion "fdisk -l" says what I have not valid partition table /dev/md0. This is my fdisk -l output: Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00057d19 Device Boot Start End Blocks Id System /dev/sda1 * 63 940910984 470455461 fd Linux raid autodetect /dev/sda2 940910985 976768064 17928540 5 Extended /dev/sda5 940911048 976768064 17928508+ 82 Linux swap / Solaris Disk /dev/sdb: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000667ca Device Boot Start End Blocks Id System /dev/sdb1 * 63 940910984 470455461 fd Linux raid autodetect /dev/sdb2 940910985 976768064 17928540 5 Extended /dev/sdb5 940911048 976768064 17928508+ 82 Linux swap / Solaris Disk /dev/md0: 481.7 GB, 481746288640 bytes 2 heads, 4 sectors/track, 117613840 cylinders, total 940910720 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/md0 doesn't contain a valid partition table This is my grub install output: root@answe:~# grub-install /dev/sda /usr/sbin/grub-setup: warn: Attempting to install GRUB to a disk with multiple partition labels or both partition label and filesystem. This is not supported yet.. /usr/sbin/grub-setup: error: embedding is not possible, but this is required for cross-disk install. root@answe:~# grub-install /dev/sdb Installation finished. No error reported. So 1) "update-grub" find only /sda and /sdb Linux, not /md0 2) "dpkg-reconfigure grub-pc" says "GRUB failed to install the following devices /dev/md0" I cannot load my system except from /sdb1 and /sda1, but in DEGRADED mode... Anybody can resolve this issue? I have big headache with this.

  Read the article

• How to keep group-writeable shares on Samba with OSX clients?

  - by Oliver Salzburg

  I have a FreeNAS server on a network with OSX and Windows clients. When the OSX clients interact with SMB/CIFS shares on the server, they are causing permission problems for all other clients. Update: I can no longer verify any answers because we abandoned the project, but feel free to post any help for future visitors. The details of this behavior seem to also be dependent on the version of OSX the client is running. For this question, let's assume a client running 10.8.2. When I mount the CIFS share on an OSX client and create a new directory on it, the directory will be created with drwxr-x-rx permissions. This is undesirable because it will not allow anyone but me to write to the directory. There are other users in my group which should have write permissions as well. This behavior happens even though the following settings are present in smb.conf on the server: [global] create mask= 0666 directory mask= 0777 [share] force directory mode= 0775 force create mode= 0660 I was under the impression that these settings should make sure that directories are at least created with rwxrwxr-x permissions. But, I guess, that doesn't stop the client from changing the permissions after creating the directory. When I create a folder on the same share from a Windows client, the new folder will have the desired access permissions (rwxrwxrwx), so I'm currently assuming that the problem lies with the OSX client. I guess this wouldn't be such an issue if you could easily change the permissions of the directories you've created, but you can't. When opening the directory info in Finder, I get the old "You have custom access" notice with no ability to make any changes. I'm assuming that this is caused because we're using Windows ACLs on the share, but that's just a wild guess. Changing the write permissions for the group through the terminal works fine, but this is unpractical for the deployment and unreasonable to expect from anyone to do. This is the complete smb.conf: [global] encrypt passwords = yes dns proxy = no strict locking = no read raw = yes write raw = yes oplocks = yes max xmit = 65535 deadtime = 15 display charset = LOCALE max log size = 10 syslog only = yes syslog = 1 load printers = no printing = bsd printcap name = /dev/null disable spoolss = yes smb passwd file = /var/etc/private/smbpasswd private dir = /var/etc/private getwd cache = yes guest account = nobody map to guest = Bad Password obey pam restrictions = Yes # NOTE: read smb.conf. directory name cache size = 0 max protocol = SMB2 netbios name = freenas workgroup = COMPANY server string = FreeNAS Server store dos attributes = yes hostname lookups = yes security = user passdb backend = ldapsam:ldap://ldap.company.local ldap admin dn = cn=admin,dc=company,dc=local ldap suffix = dc=company,dc=local ldap user suffix = ou=Users ldap group suffix = ou=Groups ldap machine suffix = ou=Computers ldap ssl = off ldap replication sleep = 1000 ldap passwd sync = yes #ldap debug level = 1 #ldap debug threshold = 1 ldapsam:trusted = yes idmap uid = 10000-39999 idmap gid = 10000-39999 create mask = 0666 directory mask = 0777 client ntlmv2 auth = yes dos charset = CP437 unix charset = UTF-8 log level = 1 [share] path = /mnt/zfs0 printable = no veto files = /.snap/.windows/.zfs/ writeable = yes browseable = yes inherit owner = no inherit permissions = no vfs objects = zfsacl guest ok = no inherit acls = Yes map archive = No map readonly = no nfs4:mode = special nfs4:acedup = merge nfs4:chown = yes hide dot files force directory mode = 0775 force create mode = 0660

  Read the article

• Drupal on an NFS share has terrible performance

  - by Marcus

  We have a setup where a Drupal 7 site with the following setup - a VMware ESXi 4.1 host server running a web vm and an NFS VM. The web VM is using Apache and mod_php. The site is still in development thus we have to turn off all forms of caching due to the frequently-updated files. Each page request takes around 15-20 seconds to complete. Profiling the PHP code shows that the vast majority of time (normally over 90%) is taking by all the is_dir(), is_file() function calls that load up the modules. I've increased PHP's realpath cache size to several megs and an strace shows that the lstat calls then drop from over 200 to around 6 and stat() decreases a bit (around 600 calls). However, while this has shaved off quite a bit of time, I am simply unable to break past the 10 second per request barrier. Is there a way to get better performance out of this setup that doesn't involve caching? Configs and stats: VMs: web - Centos 6 64bt, 2.5GB RAM, normal CPU/HD prioritisation nfs - Centos 6 64bt, 2GB RAM, normal CPU priority, high HD priority PHP: 32M realpath cache size (it's this high for testing purposes) NFS: ~]# egrep -v '#|^$' /etc/nfsmount.conf [ NFSMount_Global_Options ] Defaultvers=4 Ac=False Rsize=32k Wsize=32k Bsize=32k Reading speeds via NFS are not an issue a dd of a 100M test file using 32k blocks returns: 3200+0 records in 3200+0 records out 104857600 bytes (105 MB) copied, 1.84984 s, 56.7 MB/s real 0m1.857s user 0m0.007s sys 0m0.330s Strace on Apache process with empty realpath cache: % time seconds usecs/call calls errors syscall ------ ----------- ----------- --------- --------- ---------------- 50.78 1.157452 337 3434 28 stat 32.58 0.742656 628 1182 425 open 9.29 0.211788 762 278 1 lstat 3.17 0.072322 0 237865 write 2.45 0.055839 490 114 13 access 0.45 0.010262 43 237 brk 0.34 0.007725 10 811 74 read 0.28 0.006340 9 679 fstat 0.22 0.005069 18 281 poll 0.20 0.004533 6 698 getdents 0.09 0.001960 10 190 mmap 0.05 0.001065 14 74 accept4 0.04 0.001000 333 3 chdir 0.03 0.000750 4 190 munmap 0.01 0.000339 0 836 close 0.01 0.000247 3 75 writev 0.00 0.000068 0 611 fcntl 0.00 0.000063 1 77 shutdown 0.00 0.000000 0 1 lseek 0.00 0.000000 0 5 rt_sigaction 0.00 0.000000 0 1 rt_sigprocmask 0.00 0.000000 0 3 setitimer 0.00 0.000000 0 5 socket 0.00 0.000000 0 5 5 connect 0.00 0.000000 0 74 getsockname 0.00 0.000000 0 15 setsockopt 0.00 0.000000 0 5 getcwd 0.00 0.000000 0 1 futex ------ ----------- ----------- --------- --------- ---------------- Strace after realpaths are cached % time seconds usecs/call calls errors syscall ------ ----------- ----------- --------- --------- ---------------- 60.14 1.371006 484 2831 28 stat 31.79 0.724705 627 1155 425 open 3.53 0.080354 0 237865 write 2.65 0.060433 530 114 13 access 0.43 0.009913 99 100 brk 0.38 0.008730 11 804 74 read 0.35 0.007910 12 675 fstat 0.30 0.006775 10 654 getdents 0.13 0.003065 11 281 poll 0.09 0.002000 333 6 1 lstat 0.07 0.001545 2 807 close 0.05 0.001063 14 74 accept4 0.04 0.001000 6 179 mmap 0.02 0.000404 2 179 munmap 0.01 0.000271 4 75 writev 0.01 0.000212 0 611 fcntl 0.01 0.000129 2 77 shutdown 0.00 0.000022 0 74 getsockname 0.00 0.000000 0 1 lseek 0.00 0.000000 0 5 rt_sigaction 0.00 0.000000 0 1 rt_sigprocmask 0.00 0.000000 0 3 setitimer 0.00 0.000000 0 3 socket 0.00 0.000000 0 3 3 connect 0.00 0.000000 0 15 setsockopt 0.00 0.000000 0 5 getcwd 0.00 0.000000 0 3 chdir ------ ----------- ----------- --------- --------- ---------------- Mount: nfs.xxx.xxx.xxx:/path/to/website/files on /path/to/website/files type nfs (rw,hard,intr,noac,vers=4,addr=xx.xx.xx.xx,clientaddr=xx.xx.xx.xx) Any help is, naturally, appreciated.

  Read the article

• Batch file to uninstall all Sun Java versions?

  - by Ricket

  I'm setting up a system to keep Java in our office up to date. Everyone has all different versions of Java, many of them old and insecure, and some dating back as far as 1.4. I have a System Center Essentials server which can push out and silently run a .msi file, and I've already tested that it can install the latest Java. But old versions (such as 1.4) aren't removed by the installer, so I need to uninstall them. Everyone is running Windows XP. The neat coincidence is that Sun just got bought by Oracle and Oracle has now changed all the instances of "Sun" to "Oracle" in Java. So, I can conveniently not have to worry about uninstalling the latest Java, because I can just do a search and uninstall all Sun Java programs. I found the following batch script on a forum post which looked promising: @echo off & cls Rem List all Installation subkeys from uninstall key. echo Searching Registry for Java Installs for /f %%I in ('reg query HKLM\SOFTWARE\microsoft\windows\currentversion\uninstall') do echo %%I | find "{" > nul && call :All-Installations %%I echo Search Complete.. goto :EOF :All-Installations Rem Filter out all but the Sun Installations for /f "tokens=2*" %%T in ('reg query %1 /v Publisher 2^> nul') do echo %%U | find "Sun" > nul && call :Sun-Installations %1 goto :EOF :Sun-Installations Rem Filter out all but the Sun-Java Installations. Note the tilda + n, which drops all the subkeys from the path for /f "tokens=2*" %%T in ('reg query %1 /v DisplayName 2^> nul') do echo . Uninstalling - %%U: | find "Java" && call :Sun-Java-Installs %~n1 goto :EOF :Sun-Java-Installs Rem Run Uninstaller for the installation MsiExec.exe /x%1 /qb echo . Uninstall Complete, Resuming Search.. goto :EOF However, when I run the script, I get the following output: Searching Registry for Java Installs 'DEV_24x6' is not recognized as an internal or external command, operable program or batch file. 'SUBSYS_542214F1' is not recognized as an internal or external command, operable program or batch file. And then it appears to hang and I ctrl-c to stop it. Reading through the script, I don't understand everything, but I don't know why it is trying to run pieces of registry keys as programs. What is wrong with the batch script? How can I fix it, so that I can move on to somehow turning it into a MSI and deploying it to everyone to clean up this office? Or alternatively, can you suggest a better solution or existing MSI file to do what I need? I just want to make sure to get all the old versions of Java off of everyone's computers, since I've heard of exploits that cause web pages to load using old versions of Java and I want to avoid those.

  Read the article

• Routing and Remote Access Service won't start after full disk

  - by NKCSS

  The HDD of the server was out of disk space, and after a reboot, RRAS won't start anymore on my 2008 R2 server. Error Details: Log Name: System Source: RemoteAccess Date: 2/5/2012 9:39:52 PM Event ID: 20153 Task Category: None Level: Error Keywords: Classic User: N/A Computer: Windows14111.<snip> Description: The currently configured accounting provider failed to load and initialize successfully. The connection was prevented because of a policy configured on your RAS/VPN server. Specifically, the authentication method used by the server to verify your username and password may not match the authentication method configured in your connection profile. Please contact the Administrator of the RAS server and notify them of this error. Event Xml: <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name="RemoteAccess" /> <EventID Qualifiers="0">20153</EventID> <Level>2</Level> <Task>0</Task> <Keywords>0x80000000000000</Keywords> <TimeCreated SystemTime="2012-02-05T20:39:52.000Z" /> <EventRecordID>12148869</EventRecordID> <Channel>System</Channel> <Computer>Windows14111.<snip></Computer> <Security /> </System> <EventData> <Data>The connection was prevented because of a policy configured on your RAS/VPN server. Specifically, the authentication method used by the server to verify your username and password may not match the authentication method configured in your connection profile. Please contact the Administrator of the RAS server and notify them of this error.</Data> <Binary>2C030000</Binary> </EventData> </Event> I think it has something to do with a corrupt config file, but I am unsure of what to do. I Removed the RRAS role, rebooted, and re-added, but it keeps failing with the same error. Thanks in advance. [UPDATE] If i set the accounting provider from 'Windows' to '' the service starts but VPN won't work. Any ideas how this can be repaired?

  Read the article

• Firefox can't establish a connection to the server at www.google.com

  - by Tom

  My home page in Firefox [v4.0] and Internet Explorer [v9.0.8112.16421, Update Versions RTM (KB982861)] is currently set to Google but when I depress the quick start icon to start up either browser, I am getting the following immediate results: Unable to connect (In Firefox) Firefox can't establish a connection to the server at www.google.com. The site could be temporarily unavailable or too busy. Try again in a few moments. If you are unable to load any pages, check your computer's network connection. If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web. Internet Explorer cannot display the webpage What you can try: Diagnose Connection Problems More information This problem can be caused by a variety of issues, including: Internet connectivity has been lost. The website is temporarily unavailable. The Domain Name Server (DNS) is not reachable. The Domain Name Server (DNS) does not have a listing for the website's domain. There might be a typing error in the address. If this is an HTTPS (secure) address, click Tools, click Internet Options, click Advanced, and check to be sure the SSL and TLS protocols are enabled under the security section. For offline users You can still view subscribed feeds and some recently viewed webpages. To view subscribed feeds: Click the Favorites button , click Feeds, and then click the feed you want to view. To view recently visited webpages (might not work on all pages): Press Alt, click File, and then click Work Offline. Click the Favorites button, click History, and then click the page you want to view. Thankfully, I am able to use one browser that I have installed on my computer (Mathon v3.0.20.5000) to search online for technical assistance in this matter. I have seen several WinSock error issues mentioned; but, they are pointing to Windows XP and I am using Windows 7 Pro and remain uncertain whether anything identified as a fix for one OS will work in another. Things I've tried: HiJackThis Complete scan with Avira AntiVirus Premium. What am I overlooking? What should I do to address this problem?

  Read the article

• nginx timeout albeit ridicolous configuration

  - by Joa Ebert

  The scenario is an API server that should handle uploads. Posting on my.host.com/api/upload should do something with the body the client sends. However the API server has been designed to block the whole request until it fully processed the file, including some analysis which can take up to approx. 5min (...!). This has to change of course. In the meantime I wanted to setup nginx as a load balancer in front of the API servers. I quickly ran into a timeout issue, consulted Google and came up with this ridiculous test configuration: user www-data; worker_processes 4; error_log /var/log/nginx/error.log; pid /var/run/nginx.pid; events { worker_connections 1024; } http { include /etc/nginx/mime.types; access_log off; sendfile on; send_timeout 3600; keepalive_timeout 3600 120; tcp_nopush on; tcp_nodelay on; gzip off; client_header_timeout 3600; client_body_timeout 3600; proxy_send_timeout 3600; proxy_read_timeout 3600; proxy_connect_timeout 1800; proxy_next_upstream error; include /etc/nginx/conf.d/*.conf; include /etc/nginx/sites-enabled/*; } And upstream test { server host1; server host2; } server { listen 80; server_name my.host.com; client_max_body_size 10m; location /api/ { proxy_pass http://test; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header Host $host; proxy_redirect off; } } Still, when an upload happens, I get the following result in the error.log: 2010/12/22 13:36:42 [error] 5256#0: *187359 upstream timed out (110: Connection timed out) while reading response header from upstream, client: xx.xx.xx.xx, server: my.host.com, request: "POST /api/upload HTTP/1.1", upstream: "http://apiserver:80/upload", host: "my.host.com" What else could I do? If I look at the log of the API server I still see that it is processing the request and analyzing the file. But I think 3600 seconds as a timeout should be more than enough. This happens even after a could of seconds. And I did a reload and force-reload of the configuration as well of course.

  Read the article

• Scaling a video processing application on EC2?

  - by Stpn

  I am approaching the need to scale a video-processign application that runs on EC2. So far the setup is one machine: Backbonejs frontend Rails 3.2 Postgresql Resque + S3 for storage The flow of the app is as follows: 1) Request from frontend. Upload a video. 2) Storing video 3) Quering external APIs. 4) Processing / encoding videos. 5) Post to frontend. I can separate the backend and frontend without any problems, but when it comes to distributing the backend between several servers I am a bit puzzled. I can probably come up with a temporary solution (like just duplicating apps making several instances), but since I don't really have expertise in backend system administration, there can be some fundamental mistakes.. Also I would rather have something that is scalable. I wonder if anyone can give some feedback on the following plan: A) Frontend machine. Just frontend, talks to backend via REST Api of sorts. B) Backend server (BS), main database. Gets request from 1), posts to 2) saves uploads to 3) C) S3 storage. D) Server for quering APIs. Basically just a Resque workers, that post info back to 2) E) Server for video encoding. Processes videos uploaded on 3) and uploads them back. So I will have: A)frontend \ \ B)MAIN_APP/DB ----- C)S3 Storage (Files) / \ / / \ / D)ExternalAPI_queries E)Video_Processing (redundant DB) (redundant DB) All this will supposedly talk to each other via HTTP requests. My reason for this is that Video Processing part is really the most resource-intensive and I would just run barebones application that accepts requests and starts processing them. Questions: 1) In this setup I will have the main database at B) and all other servers will communicate with it via HTTP requests (and store duplicates of databases also I guess..for safety reasons). Is it the right approach or should I have 1 database that everyone connects to (how then?) 2) Is it a good idea to separate API queries from Video Processing part? Logically they are very close (processing is determined by the result of API queries), but resource-wise Video Processing is waaay more intensive. 3) what should I use to distribute calls between backend apps based on load?

  Read the article

• What the best way to recover from when your RAID H/W incorrectly thinks a disk is missing

  - by Software Monkey

  I have a Windows 7 system with an MSI motherboard (running the latest AMD BIOS) and two of my four disks (not the system boot disk) configured via the Mobo as RAID-1. After a normal system restart today, the RAID BIOS reports that one of the two drives has been disconnected or has failed. It's not really failed; via recovery tools I can verify that if I take the BIOS out of RAID mode. But I can find no way to re-add the second hard disk to the array and rebuild via the BIOS - the only option seems be to delete the array and recreate it, but I've done that once before and it blows away the disk. It's done this once before, however on a subsequent reboot after double-checking the drive cabling (but not changing anything) and it boot up fine. So I think the mobo RAID is a little bit flaky. At this point I would like to remove the RAID drivers, change to AHCI mode and switch over to using a Windows 7 dynamic mirror disk. But the RAID drivers seem somehow deeply bound into the Windows startup - I can't find anything like the good ol' safe-mode in Windows 7. If I boot from the Win 7 install disk in ACHI mode I can use recovery tools to log in to the Windows 7 installation, so the boot drive it seems fine with ACHI mode. Additionally, I can see all my other disks, run chkdsk on them and they seem to be fine. If I try to boot from the HDD in AHCI mode, it just reboots part way through, presumably because the RAID drivers load and conflict with the BIOS being set to AHCI. So: How do I strip the RAID drivers from my Win 7 installation? If I delete the RAID logical disk, will it really delete partitioning information, or is that just a poorly worded message when it says the data on the disk will be deleted? If I disconnect the 2 disks in a RAID array, then delete the logical disk array, and then reconnect and reboot still in RAID mode, will the disks simply revert to RAID single-disks like my other 2 and then maybe I can leave windows with RAID drivers by operate the disks as singles with 2 of them in a Windows dynamic disk mirrored setup? Does Windows 7 have anything like the Windows XP Repair Install, where it will reinstall the O/S binaries from CD, but leave apps and setup alone. I am really hoping I don't have to do a complete reinstall of Windows 7 - the last one, when I upgraded from XP, took me two days to get everything set up and installed.

  Read the article

• Linux Software RAID1 Rebuild Completes, but after reboot, its degraded again

  - by zimmy6996

  I have been beating my head with an issue here, and I'm now turning to the internet for help. I have a system running Mandrake Linux, with the following configuration: /dev/hda - This is a IDE drive. Has some partitions on it that boot the system and make up most of the file system. /dev/sda - This is drive 1 of 2 for a software raid /dev/md0 /dev/sdb - This is drive 2 of 2 for a software raid /dev/md0 md0 gets mounted but fstab as /data-storage, so it is not critical to the systems ability to boot. We can comment it out of fstab, and the system works just fine either way. The problem is, we have a failed sdb drive. So I shut the box down, and have pulled the failed disk and installed a new disk. When the system boots up, /proc/mdstat shows only sda as part of the raid. I then run the various command to rebuild the RAID to /dev/sdb. Everything rebuilds correctly, and upon completion, you look at /proc/mdstat and it shows 2 drives sda1(0) and sdb1(1). Everything looks great. Then you reboot the box ... UGH!!! Once rebooted, sdb is missing again from the RAID. It is like the rebuild never happened. I can walk through the commands to rebuild it again, and it will work, but again, after reboot, the box seems to make sdb just vanish! The real odd thing is, if after reboot, I pull sda out of the box, and try to get the system to load with the rebuilt sdb drive in the system, and when I do, the system actually throws and error just after grub, and says something about drive error, and the system has to shut down. Thoughts??? I'm starting to wonder if grub has something to do with this mess. That the drive isn't being setup within grub to be visible at boot? This RAID array isn't necessary for the system to boot, but when the replacement drive is in there, without SDA it won't boot system, so it makes me believe there is something to that. On top of that, there just seems to be something wonky here the drive falling off of RAID after reboot. I've hit the point of pounding my head on the keyboard. Any help would be greatly appreciated!!!

  Read the article

• Why Photoshop CS5's photomerge's result immediately disappear?

  - by koiyu

  I have a bunch of JPG-files which I want to stitch together with Photoshop's Photomerge function. I choose File → Automate → Photomerge... and browse for the files. Photoshop opens the files and starts analyzing. I see the process bar filling and different phases are mentioned on the process bar. Nothing weird there. When the merging is done (and if I don't blink my eyes), I can see layers-palette is populated with the chosen files and, by quickly judging from the layer thumbnails, they're properly aligned. Sometimes the image window itself can be seen, but not always. Problem is that the layers and the image disappear in a flash. There is no error message. Everything is like prior starting the photomerge. No file has been changed. I could continue to use Photoshop normally. This is what I've tried so far: Loaded folder which has 38 JPG images, 4272 x 2848 and ˜ 5 megabytes per file Loaded the same files, but chose Use Files instead of Use Folder in the photomerge's window Loaded 19 JPG images, 4272 x 2848 and ˜ 5 megabytes per file Loaded 10 JPG images, ⇑ see above Loaded 5 JPG images, see above Loaded 3 JPG images, see above Scaled the images to 2256 x 1504 and ˜< 1 megabytes per file Loaded in a set of 38, 19, 10, 5, 3 Following steps are tested with these smaller files and with a set of 5 images Read Adobe's forums and reduced the amount of RAM Photoshop uses gradually from ˜ 80 % to 50 % (though I didn't understand the logic behind this) Would've reduced cache tile size to 128K, but it was set so already Disabled OpenGL Scaled the images to 800 x 533 and ˜ 100 kilobytes per file, loaded a set of 5 Read more unanswered threads around the internet In between each test I closed and reopened Photoshop. This is the first time I've even tried using photomerge. Am I doing something wrong? How can I locate what is the problem? How do I fix this? Photoshop is 64 bit Extended CS5 version. I'm on a mid-2010 quad-core (i5) iMac with up-to-date Mac OS X 10.6.6. Edit: Weird. First loading the images into one file via File → Scripts → Load Files into Stack… and then using Edit → Auto-Align Layers…, which, effectively, is the same as photomerge (even the dialog looks kind of the same), works! Even with the original JPGs without any issues. This doesn't fix photomerge, though.

  Read the article

• Installing and configuring Zend Framework 2 server-wide [Ubuntu] and test driving ZendSkeletonApplication

  - by kinologik

  I'm trying to have ZF2 installed for all my subdomains at once (Ubuntu 12.04). ZF2 just launched its first stable version, so I wanted to install it on my development server and finally get my hands dirty with it. I downloaded ZF2 and unzipped the files in /var/ZF2/ (which now contains Zend/[all components]). I then edited /etc/php5/apache2/php.ini and added the path to the ZF2 files: include_path = ".:/var/ZF2" I then downloaded the ZendSkeletonApplication and unzipped it in /var/www/skeleton. I know it is suggested to composer.phar to install ZF2 application, but: I don't want to make a local installation of ZF2... I want to make a server-wide installation be able to use my Zend components on all my domains/subdomains on my development server. Before using any automatic installation process, I'd really like to understand that process by doing it manually at first. Obviously, something goes wrong when I fire ZendSkeletonApplication, and I get the following when hit the following URL: http://www.myDevServer.com/skeleton/public/ Fatal error: Uncaught exception 'RuntimeException' with message 'Unable to load ZF2. Run `php composer.phar install` or define a ZF2_PATH environment variable.' in /var/www/skeleton/init_autoloader.php:48 Stack trace: #0 /var/www/skeleton/public/index.php(9): include() #1 {main} thrown in /var/www/skeleton/init_autoloader.php on line 48 I have skimmed through the docs, tutorials and the like, but there are no straight forward answer to this kind of configuration. In the official doc, in the (very short) installation chapter, I see a reference to adding an include path in PHP. But no example... http://zf2.readthedocs.org/en/latest/ref/installation.html Once you have a copy of Zend Framework available, your application needs to be able to access the framework classes found in the library folder. Though there are several ways to achieve this, your PHP include_path needs to contain the path to Zend Framework’s library. But then, when I get to the "Getting Started" chapter, it's all composer.phar and nothing else... http://zf2.readthedocs.org/en/latest/user-guide/skeleton-application.html I'm no sysAdmin, just a Zend enthusiast. I'm pretty sure this PEBKAC problem might be obvious for those who already got in ZF2 previous betas. Thanks for helping my out. EDIT: Problem was resolved, thanks to Daniel M. Just setting up ZF2_PATH in httpd.conf was all that was needed. SetEnv ZF2_PATH /var/ZF2 I also removed the include_path reference in php.ini and everything works just fine. So I have no idea why Zend suggested to include it there in their official docs.

  Read the article

• Unable to boot from LiveCD/USB and even Super Grub Disk!

  - by Reuben L.

  Hi all, I'm in a fix. Basically this morning, I decided to format my Win7 as it was getting really slow and I did so with no problems. I also have a Linux Mint OS on dual boot. Since I was springcleaning my windows partition, I decided it was a good idea to do the same to my linux partition. I downloaded the latest version of Linux Mint (Julia) and burned the LiveCD. Now here is where the problem lies, when I restarted Windows and chose to boot from the LiveCD, it didn't work. No joke. There was just a little underscore blinking for a long time before it went back to GRUB which prompted me to select an OS to boot. However, when I went into my old Linux Mint OS and restarted the machine, the LiveCD worked... to a certain extent. It would load and look as though it was ready to install Linux Mint 10 but the moment it got to the option screen, the whole screen turned into a checkered and jumbled mess. At this point I thought it was the LiveCD or the .iso file. I had an Ubuntu LiveUSB for recovery purposes and I tried that. The exact same thing happened. Can't boot the LiveUSB if I restarted from Windows, but works when I reboot from Linux. BUT still the same checkered screen that doesnt respond. Did a bit of googling and reckoned it might be something wrong with my GRUB. Did some updating and didnt make a difference. Then I tried the Super Grub Disk and STUPIDLY uninstalled GRUB. (Note that booting to SGD had the exact same problem - can't be done if I rebooted from Windows). Now I can't access my Linux Mint 9 cos the the bootup screen (mbr) only has Windows 7 as an option. Remember me mentioning that I can't boot from any CD/USB/recovery CD when I reboot from Windows? And now that I can't access Linux, there's no way for me to do any form of recovery! I've tried using the command prompt utility at startup recovery but to no avail. Anyone can help me with this?

  Read the article

• Graphics card artifacting

  - by White Phoenix

  This is my current build: EVGA X58 (first generation) motherboard Intel i7 965 @ stock clocks 3x 2GB DDR3-1600 Corsair RAM at stock timings and voltages Corsair AX750 80 Plus Gold PSU 1 Optical Drive 1 Seagate 7200.10 500 GB drive 2x Western Digital Caviar Black 1 TB drives OCZ Vertex 1 60 GB EVGA GTX 460 Antec 1200 case HT-Omega Striker 7.1 Sound Card Windows 7 32-bit Professional (PAE Enabled) My graphics card started artifacting while I was playing a game. It artifacted, the display blinked, then I got an NVIDIA driver has crashed and recovered message. Kept going, more artifacts, another crash, but this time my display blanked out and I couldn't do anything. Restarted my computer - artifacting is in the BIOS - got to Windows 7 but it BSOD'd before I could even log in. I restarted the computer again - artifacts cleared themselves out and I managed to get to Win7, but it soon started blinking in and out and artifacting again. Checked the card temps and they're well within range. (50 idle, 70 full load) The ambient temperature here is about 80-85F with high humidity. Tried Safe Mode and it still froze up/BSOD'd. Already tried the following to fix this problem: - Reseat the graphics card and swapped in a different slot. - Removed cover on card and sprayed with compressed air to clean it out. - Swapped around memory and/or went with only using one stick at a time. - Underclocked card I called EVGA Tech Support and they said that the voltage on the 12V rail of my Corsair AX750 PSU was on the high end of the "acceptable" range (12.4V, highest within acceptable range is 12.6V - optimal is obviously 12V). They gave me an RMA number anyway, but I want to get a second opinion from you all before I send this thing off, as shipping from where I live to EVGA is kind of pricey. This PSU is only 6 months old. So that I don't have to play RMA tag, which case would be most likely? I'm strapped for cash at the moment so I want to reduce the amount of RMAs I have to do since shipping is expensive here. Is there any surefire way to test to see if it's really the graphics card or the PSU? I tried unplugging any devices that were connected to the 12V rail (except for my SSD and graphics card) as I do have 3 mechanical hard drives, but the voltage for that rail didn't drop (it remained at 12.4V). I'm fairly sure it isn't the drivers since I'm getting the artifacting at the BIOS too. Right now I'm back in Windows 7 but I don't know for how long until it messes up again. Any ideas?

  Read the article

• Puppet and launchd services?

  - by Joel Westberg

  We have a production environment configured with Puppet, and want to be able to set up a similar environment on our development machines: a mix of Red Hats, Ubuntus and OSX. As might be expected, OSX is the odd man out here, and sadly, I'm having a lot of trouble with getting this to work. My first attempt was using macports, using the following declaration: package { 'rabbitmq-server': ensure => installed, provider => macports, } but this, sadly, generates the following error: Error: /Stage[main]/Rabbitmq/Package[rabbitmq-server]: Could not evaluate: Execution of '/opt/local/bin/port -q installed rabbitmq-server' returned 1: usage: cut -b list [-n] [file ...] cut -c list [file ...] cut -f list [-s] [-d delim] [file ...] while executing "exec dscl -q . -read /Users/$env(SUDO_USER) NFSHomeDirectory | cut -d ' ' -f 2" (procedure "mportinit" line 95) invoked from within "mportinit ui_options global_options global_variations" Next up, I figured I'd give homebrew a try. There is no package provider available by default, but puppet-homebrew seemed promising. Here, I got much farther, and actually managed to get the install to work. package { 'rabbitmq': ensure => installed, provider => brew, } file { "plist": path => "/Library/LaunchDaemons/homebrew.mxcl.rabbitmq.plist", source => "/usr/local/opt/rabbitmq/homebrew.mxcl.rabbitmq.plist", ensure => present, owner => root, group => wheel, mode => 0644, } service { "homebrew.mxcl.rabbitmq": enable => true, ensure => running, provider => "launchd", require => [ File["/Library/LaunchDaemons/homebrew.mxcl.rabbitmq.plist"] ], } Here, I don't get any error. But RabbitMQ doesn't start either (as it does if I do a manual load with launchctl) [... snip ...] Debug: Executing '/bin/launchctl list' Debug: Executing '/usr/bin/plutil -convert xml1 -o /dev/stdout /Library/LaunchDaemons/homebrew.mxcl.rabbitmq.plist' Debug: Executing '/usr/bin/plutil -convert xml1 -o /dev/stdout /var/db/launchd.db/com.apple.launchd/overrides.plist' Debug: /Schedule[weekly]: Skipping device resources because running on a host Debug: /Schedule[puppet]: Skipping device resources because running on a host Debug: Finishing transaction 2248294820 Debug: Storing state Debug: Stored state in 0.01 seconds Finished catalog run in 25.90 seconds What am I doing wrong?

  Read the article

• PHP-FPM performing worse than mod_php

  - by lordstyx

  Recently the website I maintain has been growing a lot and I saw the point coming where I'd want to switch from apache to nginx, because I kept on reading that it performs way better. Now I've done the switch, and I have to say, nginx is keeping up just fine. However, php-fpm is forming a problem. Where the php pages used to take 0.1 second to generate with the same load they now take around 3 seconds! Furthermore the error.log from nginx is being spammed with errors like: upstream timed out (110: Connection timed out) while connecting to upstream, client: ... I also tried using unix sockets instead, but those would complain about the following: connect() to unix:/tmp/php5-fpm.sock failed (11: Resource temporarily unavailable) while connecting to upstream I've fiddled with settings here and there but nothing seems to work. Changing the amount of pm.max_children doesn't seem to help a lot either, but with it's current amount at 350 it seems to be the lesser of all evil. The server that's being used has 3 GB RAM (not all of it is free due to a MySQL server also running) along with 2 dual-core processors (4 cores in total). Am I doing something majorly wrong with the settings here, or is the server simply not capable enough? EDIT: Here is the nginx server block server { listen 80; listen [::]:80 default ipv6only=on; root /var/www; index index.php index.html index.htm; server_name localhost; location / { try_files $uri $uri/ /index.html; } location /doc/ { alias /usr/share/doc/; autoindex on; allow 127.0.0.1; deny all; } location = /50x.html { root /usr/share/nginx/www; } location ~ \.php$ { fastcgi_split_path_info ^(.+\.php)(/.+)$; # NOTE: You should have "cgi.fix_pathinfo = 0;" in php.ini try_files $uri = 404; # With php5-cgi alone: fastcgi_pass 127.0.0.1:9000; # With php5-fpm: #fastcgi_pass unix:/tmp/php5-fpm.sock; fastcgi_index index.php; include fastcgi_params; } location ~ /\.ht { deny all; } } And the php-fpm pool: [www] user = www-data group = www-data listen = 127.0.0.1:9000 ;listen = /tmp/php5-fpm.sock listen.backlog = -1 pm = dynamic pm.max_children = 350 pm.start_servers = 200 pm.min_spare_servers = 10 pm.max_spare_servers = 350 pm.max_requests = 1536 rlimit_files = 65536 rlimit_core = unlimited chdir = /

  Read the article

• Nginx, proxy passing to Apache, and SSL

  - by Vic

  I have Nginx and Apache set up with Nginx proxy-passing everything to Apache except static resources. I have a server set up for port 80 like so: server { listen 80; server_name *.example1.com *.example2.com; [...] location ~* \.(?:ico|css|js|gif|jpe?g|png|pdf|te?xt)$ { access_log off; expires max; add_header Pragma public; add_header Cache-Control "public, must-revalidate, proxy-revalidate"; add_header Vary: Accept-Encoding; } location / { proxy_pass http://127.0.0.1:8080; include /etc/nginx/conf.d/proxy.conf; } } And since we have multiple ssl sites (with different ssl certificates) I have a server{} block for each of them like so: server { listen 443 ssl; server_name *.example1.com; [...] location ~* \.(?:ico|css|js|gif|jpe?g|png|pdf|te?xt)$ { access_log off; expires max; add_header Pragma public; add_header Cache-Control "public, must-revalidate, proxy-revalidate"; add_header Vary: Accept-Encoding; } location / { proxy_pass https://127.0.0.1:8443; include /etc/nginx/conf.d/proxy.conf; proxy_set_header X-Forwarded-Port 443; proxy_set_header X-Forwarded-Proto https; } } server { listen 443 ssl; server_name *.example2.com; [...] location ~* \.(?:ico|css|js|gif|jpe?g|png|pdf|te?xt)$ { access_log off; expires max; add_header Pragma public; add_header Cache-Control "public, must-revalidate, proxy-revalidate"; add_header Vary: Accept-Encoding; } location / { proxy_pass https://127.0.0.1:8445; include /etc/nginx/conf.d/proxy.conf; proxy_set_header X-Forwarded-Port 443; proxy_set_header X-Forwarded-Proto https; } } First of all, I think there is a very obvious problem here, which is that I'm double-encrypting everything, first at the nginx level and then again by Apache. To make everything worse, I just started using Amazon's Elastic Load Balancer, so I added the certificate to the ELB and now SSL encryption is happening three times. That's gotta be horrible for performance. What is the sane way to handle this? Should I be forwarding https on the ELB - http on nginx - http on apache? Secondly, there is so much duplication above. Is the best method to not repeat myself to put all of the static asset handling in an include file and just include it in the server?

  Read the article

• Frequent and weird wifi disconnections

  - by Sidou

  How would you explain, troubleshoot (and solve) the following problem? Wifi ADSL modem router D-link 2640R installed in living room at about 1.8m height. Working fine, synchronising and getting/serving stable internet connection. First situation: -Laptop 01 in other end of the house, let's say in room01 southern to the living room, distant by about 15m. Getting stable signal of good to very good quality. No disconnection. -Laptop 02 in room02 opposite to room01 (5m West) which makes it almost at the same distance and direction from the router located 15m North. Getting stable signal of good to very good quality. No disconnection. Second situation: -Laptop 01 moved to room03 Northern to the living room (actually just 3m behind the wall where the router lies). Getting stable signal of excellent quality. No disconnection. -Laptop 02 still in room02 but now experiences frequent disconnections (actually almost impossible to get the Internet even though the signal level is still very good. Either no Internet with the wifi icon appearing connected to access point or no connection established at all which happens every 2 minutes and that means virtually no Internet at all as I can just get a timeframe of 1 minute or so to load any website or even get to the router's web based control panel. If Laptop 01 is completely shut down or its wifi adapters shut down or even still working but its wifi MAC address forbidden, then Laptop 02 has no problem at all. If Laptop 02 is moved to a nearer location to the router, in the living room for instance, then no connection problem occurs even if Laptop 01 is also connected. And also if we move back Laptop 01 to its original location (room 01), then no problem as well. I'm completely lost and don't know how to address this issue. I tried to change the Wifi channel and even tried the auto channel scan but that didn't solve it. I know that the problem is probably coming from Laptop 01 being in its new location or some sort of interference as the problem occurs only under the described condition but I have no idea how to solve it! I also scanned the neighborhood for wifi jam using InSSIDer, there are few other access points but they don't seem to affect the situation. Any ideas about the steps to follow or tools to use ?

  Read the article

• Why do I sometimes get 'sh: $'\302\211 ... ': command not found' in xterm/sh?

  - by amn

  Sometimes when I simply type a valid command like 'find ...', or anything really, I get back the following, which is completely unexpected and confusing (... is command name I type): sh: $'\302\211...': command not found There is some corruption going on I think. I don't use color in my prompt, I am using the Bash shell in POSIX mode as sh (chsh to /bin/sh and so on - $SHELL is sh). What is going on and why does this keep happening? Anything I can debug? I think this is more of an xterm issue than sh, or at least a combination of the two. Files, for context: My /etc/profile, as distributed with Arch Linux x86-64: # /etc/profile #Set our umask umask 022 # Set our default path PATH="/usr/local/sbin:/usr/local/bin:/usr/bin" export PATH # Load profiles from /etc/profile.d if test -d /etc/profile.d/; then for profile in /etc/profile.d/*.sh; do test -r "$profile" && . "$profile" done unset profile fi # Source global bash config if test "$PS1" && test "$BASH" && test -r /etc/bash.bashrc; then . /etc/bash.bashrc fi # Termcap is outdated, old, and crusty, kill it. unset TERMCAP # Man is much better than us at figuring this out unset MANPATH My /etc/shrc, which I created as a way to have sh parse some file on startup, when non-login shell. This is achieved using ENV variable set in /etc/environment with the line ENV=/etc/shrc: PS1='\u@\H \w \$ ' alias ls='ls -F --color' alias grep='grep -i --color' [ -f ~/.shrc ] && . ~/.shrc My ~/.profile, I am launching X when logging in through first virtual tty: [[ -z $DISPLAY && $XDG_VTNR -eq 1 ]] && exec xinit -- -dpi 111 My ~/.xinitc, as you can see I am using the system as a Virtual Box guest: xrdb -merge ~/.Xresources VBoxClient-all awesome & exec xterm And finally, my ~/.Xresources, no fancy stuff here I guess: *faceName: Inconsolata *faceSize: 10 xterm*VT100*translations: #override <Btn1Up>: select-end(PRIMARY, CLIPBOARD, CUT_BUFFER0) xterm*colorBDMode: true xterm*colorBD: #ff8000 xterm*cursorColor: S_red Since ~/.profile references among other things /etc/bash.bashrc, here is its content: # # /etc/bash.bashrc # # If not running interactively, don't do anything [[ $- != *i* ]] && return PS1='[\u@\h \W]\$ ' PS2='> ' PS3='> ' PS4='+ ' case ${TERM} in xterm*|rxvt*|Eterm|aterm|kterm|gnome*) PROMPT_COMMAND=${PROMPT_COMMAND:+$PROMPT_COMMAND; }'printf "\033]0;%s@%s:%s\007" "${USER}" "${HOSTNAME%%.*}" "${PWD/#$HOME/~}"' ;; screen) PROMPT_COMMAND=${PROMPT_COMMAND:+$PROMPT_COMMAND; }'printf "\033_%s@%s:%s\033\\" "${USER}" "${HOSTNAME%%.*}" "${PWD/#$HOME/~}"' ;; esac [ -r /usr/share/bash-completion/bash_completion ] && . /usr/share/bash-completion/bash_completion I have no idea what that case statement does, by the way, it does look a bit suspicious though, but then again, who am I to know.

  Read the article

• Google Chrome and Firefox Rendering

  - by user13503

  When attempting to visit sites running javascript, Google Chrome and Firefox often fail to render them properly. For example, when hitting google.com/codesearch results, I just get a blank page. http://img340.imageshack.us/img340/8527/200910071518.png This rendering problem happens in both browsers on a machine running Windows XP Professional x64. Internet explorer is able to render the page just fine. Also, controls on other pages sometimes fail to respond, for example in Google Docs. Has anyone encountered this issue before in Chrome/Firefox? Do they share a common installation of the V8 javascript engine? I'm baffled by this issue. Here's the source code for the image above that Chrome loads when attempting to retrieve the page: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd"><html><head><script>function a(c){this.t={};this.tick=function(d,e,b){var f=b?b:(new Date).getTime();this.t[d]=[f,e]};this.tick("start",null,c)}var g=new a;window.jstiming={Timer:a,load:g};try{window.jstiming.pt=window.external.pageT}catch(h){}; </script><title></title><script language="javascript" src="/codesearch/js/CachedFile/F1A2CB189D0FCB1FF201C42BF6A5447C.cache.js"></script></head><body><iframe src="javascript:''" id="__gwt_historyFrame" style="width:0;height:0;border:0"></iframe><script>if(window.jstiming){window.jstiming.a={};window.jstiming.c=1;function k(a,d,f){var b=a.t[d];if(!b)return undefined;b=a.t[d][0];if(f!=undefined)var h=f;else h=a.t.start[0];return b-h}window.jstiming.report=function(a,d,f){var b="";if(window.jstiming.pt){b+="&srt="+window.jstiming.pt;delete window.jstiming.pt}try{if(window.external&&window.external.tran)b+="&tran="+window.external.tran}catch(h){}if(a.b)b+="&"+a.b;var e=a.t,p=e.start,l=[],i=[];for(var c in e)if(!(c=="start"))if(!(c.indexOf("_")==0)){var j= e[c][1];if(j)e[j]&&i.push(c+"."+k(a,c,e[j][0]));else p&&l.push(c+"."+k(a,c))}delete e.start;if(d)for(var m in d)b+="&"+m+"="+d[m];var n=[f?f:"http://csi.gstatic.com/csi","?v=3","&s="+(window.jstiming.sn?window.jstiming.sn:"codesearch")+"&action=",a.name,i.length?"&it="+i.join(",")+b:b,"&rt=",l.join(",")].join(""),g=new Image,o=window.jstiming.c++;window.jstiming.a[o]=g;g.onload=g.onerror=function(){delete window.jstiming.a[o]};g.src=n;g=null;return n}}; </script></body></html> Thanks, Steve

  Read the article

• High CPU usage - symptoms moving from server to server after bouncing

  - by grt3kl

  First off, I apologize if I didn't include enough information to properly troubleshoot this issue. This sort of thing isn't my specialty, so it is a learning process. If there's something I need to provide, please let me know and I'll be happy to do what I can. The images associated with my question are at the bottom of this post. We are dealing with a clustered environment of four WebLogic 9.2 Java application servers. The cluster utilizes a round-robin load algorithm. Other details include: Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_12-b04) BEA JRockit(R) (build R27.4.0-90_CR352234-91983-1.5.0_12-20071115-1605-linux-x86_64, compiled mode) Basically, I started looking at the servers' performance because our customers are seeing lots of lag at various times of the day. Our servers should easily handle the loads they are given, so it's not clear what's going on. Using HP Performance Manager, I generated some graphs that indicate that the CPU usage is completely out of whack. It seems that, at any given point, one or more of the servers has a CPU utilization of over 50%. I know this isn't particularly high, but I would say it is a red flag based on the CPU utilization of the other servers in the WebLogic cluster. Interesting things to note: The high CPU utilization was occurring only on server02 for several weeks. The server crashed (extremely rare; we are not sure if it's related to this) and upon starting it back up, the CPU utilization was normal on all 4 servers. We restarted all 4 managed servers and the application server (on server01) yesterday, on 2/28. As you can see, server03 and server04 picked up the behavior that was seen on server02 before. The CPU utilization is a Java process owned by the application user (appown). The number of transactions is consistent across all servers. It doesn't seem like any one server is actually handling more than another. If anyone has any ideas or can at least point me in the right direction, that would be great. Again, please let me know if there is any additional information I should post. Thanks!

  Read the article

• Subdomains, folders, internationalization, and hosting solutions

  - by justinbach

  I'm a web developer and I recently landed a gig to develop the US / international version of a site for a company that's big in Europe but hasn't done much expansion into the US yet. They've got an existing site at company.com, which should remain visible to European customers after the new site goes up, and an existing (not great) site at company.us, which I'm going to be redeveloping (the .us site will be taken down when my version goes up--keep reading for details). My solution needs to take into account the fact that there are going to be new, localized versions of the site in the fairly near future, so the framework I'm writing needs to be able to handle localizations fairly easily (dynamically load language packs, etc). The tricky thing is the European branch of the company manages the .com site hosting (IIS-based) and the DNS, while I'll be managing the US hosting (and future localizations), which will likely be apache-based. I've never been a big fan of the ".us" TLD--I think most US users are accustomed to visiting the .com--so the thought is that the European branch will detect the IP of inbound traffic and redirect all US-based addresses to us.example.com (or whatever the appropriate localized subdomain might be), which would point to the IP address of my host. I'd then serve the appropriate locale-specific content by pulling the subdomain from the $_SERVER superglobal (assuming PHP). I couldn't find any examples of international organizations that take a subdomain-based approach for localization, but I'm not sure I have any other options as a result of the unique hosting structure here (in that there's not a unified hosting solution for the European and US sites). In my experience, the US version of an international site would live at domain.com/us, not at us.domain.com, and I'd imagine that this has to do with SEO (subdomains are treated as separate sites, so improved rankings for the US site wouldn't help the Canadian version if subdomains are used to differentiate between them). My question is: is there a better approach to solving this problem than the one I'm taking? Ideally, I'd like to use a folder-based approach (see adidas.com as an example of what I'm talking about), but I'm not sure that's a possibility given that the US site (and other localizations) will not be hosted on the same server as the rest of the .com. Can you, in IIS, map a folder (e.g. domain.com/us) to a different IP address? What would you recommend? Thanks for your consideration.

  Read the article

• wget-ing protected content with exported cookies

  - by XXL

  i have exported a pair of cookies from firefox that are valid for the URL in question and tried accessing/downloading the protected content off that addr., but the end result is a return to the login page. i have tried doing about the same thing for 3 other websites with similiar outcome. any clues as to what might i be doing wrong? the syntax i'm using: wget --load--cokies=FILE URL DEBUG output created by Wget 1.12 on linux-gnu. Stored cookie www.x.org -1 (ANY) / [expiry 1901-12-13 22:25:44] c_secure_login lz8xZQ%3D%3D Stored cookie www.x.org -1 (ANY) / [expiry 1901-12-13 22:25:44] c_secure_pass 2fd4e1c67a2d28fced849ee1bb76e74a Stored cookie www.x.org -1 (ANY) / [expiry 1901-12-13 22:25:44] c_secure_uid GZX4TDA%3D --2011-01-14 13:57:02-- www.x.org/download.php?id=397003 Resolving www.x.org... 1.1.1.1 Caching www.x.org = 1.1.1.1 Connecting to www.x.org|1.1.1.1|:80... connected. Created socket 5. Releasing 0x0943ef20 (new refcount 1). ---request begin--- GET /download.php?id=397003 HTTP/1.0 User-Agent: Wget/1.12 (linux-gnu) Accept: / Host: www.x.org Connection: Keep-Alive ---request end--- HTTP request sent, awaiting response... ---response begin--- HTTP/1.1 302 Found Date: Fri, 14 Jan 2011 11:26:19 GMT Server: Apache X-Powered-By: PHP/5.2.6-1+lenny8 Set-Cookie: PHPSESSID=5f2fd97103f8988554394f23c5897765; path=/ Expires: Thu, 19 Nov 1981 08:52:00 GMT Cache-Control: no-store, no-cache, must-revalidate, post-check=0, pre-check=0 Pragma: no-cache Location: www.x.org/login.php?returnto=download.php%3Fid%3D397003 Vary: Accept-Encoding Content-Length: 0 Keep-Alive: timeout=15, max=100 Connection: Keep-Alive Content-Type: text/html ---response end--- 302 Found Stored cookie www.x.org -1 (ANY) / [expiry none] PHPSESSID 5f2fd97103f8988554394f23c5897765 Registered socket 5 for persistent reuse. Location: www.x.org/login.php?returnto=download.php%3Fid%3D397003 [following] Skipping 0 bytes of body: [] done. --2011-01-14 13:57:02-- www.x.org/login.php?returnto=download.php%3Fid%3D397003 Reusing existing connection to www.x.org:80. Reusing fd 5. ---request begin--- GET /login.php?returnto=download.php%3Fid%3D397003 HTTP/1.0 User-Agent: Wget/1.12 (linux-gnu) Accept: / Host: www.x.org Connection: Keep-Alive Cookie: PHPSESSID=5f2fd97103f8988554394f23c5897765 ---request end--- HTTP request sent, awaiting response... ---response begin--- HTTP/1.1 200 OK Date: Fri, 14 Jan 2011 11:26:20 GMT Server: Apache X-Powered-By: PHP/5.2.6-1+lenny8 Expires: Thu, 19 Nov 1981 08:52:00 GMT Cache-Control: no-store, no-cache, must-revalidate, post-check=0, pre-check=0 Pragma: no-cache Vary: Accept-Encoding Content-Length: 2171 Keep-Alive: timeout=15, max=99 Connection: Keep-Alive Content-Type: text/html ---response end--- 200 OK Length: 2171 (2.1K) [text/html] Saving to: `x.out' 0K .. 100% 18.7M=0s 2011-01-14 13:57:02 (18.7 MB/s) - `x.out' saved [2171/2171]

  Read the article

< Previous Page | 663 664 665 666 667 668 669 670 671 672 673 674  | Next Page >