Search Results

Search found 21053 results on 843 pages for 'out of process'.

Page 668/843 | < Previous Page | 664 665 666 667 668 669 670 671 672 673 674 675  | Next Page >

• Can I have a single solid state drive and a RAID array on the same machine? [closed]

  - by jaminto

  Hi- To summarize, i'm looking to use a single solid state drive as my primary drive, and two conventional sata drives in a RAID 1 configuration for data. I am trying to install 64-bit Windows 7 onto this configuration. Is this possible? Here are the details: I built a desktop that has been running 64-bit Vista on two 500Gb in a RAID 1 array for a few years. I just purchased an Intel X25-M 80Gb Sata Solid-State Drive, and was planning on using this a my primary drive, and keeping the RAID 1 array as my data drive. I added the SSD drive and in the RAID setup, configured it as a RAID 0 array of only one disk. Then, I tried to do a clean install of windows 7 64-bit, but got stuck in the "Missing driver for CD/DVD drive" black hole of selecting driver files and Windows telling me that i don't have the appropriate driver for my hardware. The missing hardware is NOT a CD/DVD drive, since i'm installing off of my only CD/DVD drive. Plus at one point i was able to point it at a driver for my raid controller, and then my hard drives magically showed up as browsable sources for finding drivers for some other unnamed device that setup couldn't recognize. After a few hours of trying drivers (this was a very slow process) i decided to reboot and look at the BIOS settings. I'm using an ASUS M2A-VM motherboard which has an ATI SB600 RAID controller on board. I switched the "On board SATA Type" setting from "SATA" to "AHCI" thinking that since AHCI is an Intel thing, this would help. Unfortunately, this abandoned my RAID configuration, and my previously mirrored drives are showing up as separate drives when i boot into my current windows installation. Am i trying to do the impossible here? Should i just buy a separate SATA/RAID PCI card and plug the SSD into that? Any help would be greatly appreciated.

  Read the article

• Understanding ulimit -u

  - by tripleee

  I'd like to understand what's going on here. linvx$ ( ulimit -u 123; /bin/echo nst ) nst linvx$ ( ulimit -u 122; /bin/echo nst ) -bash: fork: Resource temporarily unavailable Terminated linvx$ ( ulimit -u 123; /bin/echo one; /bin/echo two; /bin/echo three ) one two three linvx$ ( ulimit -u 123; /bin/echo one & /bin/echo two & /bin/echo three ) -bash: fork: Resource temporarily unavailable Terminated one I speculate that the first 122 processes are consumed by Bash itself, and that the remaining ulimit governs how many concurrent processes I am allowed to have. The documentation is not very clear on this. Am I missing something? More importantly, for a real-world deployment, how can I know what sort of ulimit is realistic? It's a long-running daemon which spawns worker threads on demand, and reaps them when the load decreases. I've had it spin the server to its death a few times. The most important limit is probably memory, which I have now limited to 200M per process, but I'd like to figure out how I can enforce a limit on the number of children (the program does allow me to configure a maximum, but how do I know there are no bugs in that part of the code?)

  Read the article

• Hard drive causing BSOD

  - by JoshIrving

  I've come across a problem after building my new PC and installing a clean Windows 7. I originally planed on a RAID 1 or 0 but after further research I decided against it. So I was left with two 1TB Western Digital Black SATA 6Gb/s hard drives. My plan now was to use my second hard drive as a backup (using Windows Backup or 3rd party software). I set both hard drives to AHCI in the BIOS and installed Windows 7. I went through the lengthy process of downloading and installing each driver manually (latest versions), using the motherboard disk for a list of what I need. After a few restarts and before installing any software, I took an image backup onto DVD and the second hard drive. First witnessed the problem during the first scheduled Windows backup. The progress bar froze at about 70% (doc backup done, image backup in progress). It stayed still for 2 hours until it blue screened. Next time the backup froze, I tried shutting down. It logged me out and got stuck at the last step ("Shutting down" and blue spinner) for an hour, until I hard shutdown. I later realised this hasn't got anything to do with the backup. I ended up blue screening on almost every shut down (same place). Turns out, it's because of the second hard drive spinning down or turning off. The computer will now shutdown properly, as long as I remember to read or write to the second drive before executing shutdown. I've now set "Turn off hard disk after: Never" - No problems, so far. Do I have dodgy hard drive(s) or should I investigate the POWER_STATE_DRIVER_FAILURE BSOD - can it be a driver issue? AHCI?

  Read the article

• can't install anything anymore with apt-get

  - by Aymane Shuichi

  Welcome this is the log I have when trying to install anything (php5-fpm after removing it) apt-get install php5-fpm Reading package lists... Done Building dependency tree Reading state information... Done php5-fpm is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 1 not fully installed or removed. After this operation, 0 B of additional disk space will be used. Do you want to continue [Y/n]? y Setting up php5-fpm (5.4.4-14+deb7u10) ... insserv: warning: script 'S55IptabLes' missing LSB tags and overrides insserv: warning: script 'S55IptabLex' missing LSB tags and overrides insserv: There is a loop between service IptabLes and mountnfs if started insserv: loop involving service mountnfs at depth 8 insserv: loop involving service networking at depth 7 insserv: loop involving service mountnfs-bootclean at depth 10 insserv: There is a loop between service rc.local and mountall if started insserv: loop involving service mountall at depth 6 insserv: loop involving service checkfs at depth 5 insserv: loop involving service kbd at depth 11 insserv: There is a loop between service rc.local and mountall-bootclean if started insserv: loop involving service mountall-bootclean at depth 7 insserv: loop involving service urandom at depth 9 insserv: There is a loop between service IptabLes and mountdevsubfs if started insserv: loop involving service mountdevsubfs at depth 2 insserv: loop involving service udev at depth 1 insserv: There is a loop at service rc.local if started insserv: There is a loop at service IptabLes if started insserv: Starting IptabLes depends on rc.local and therefore on system facility `$all' which can not be true! (x99 times repeated ) insserv: Max recursions depth 99 reached insserv: loop involving service postfix at depth 2 insserv: There is a loop between service IptabLes and udev if started insserv: loop involving service mountkernfs at depth 1 insserv: loop involving service IptabLes at depth 1 Now here is the error i get insserv: exiting now without changing boot order! update-rc.d: error: insserv rejected the script header dpkg: error processing php5-fpm (--configure): subprocess installed post-installation script returned error exit status 1 Errors were encountered while processing: php5-fpm E: Sub-process /usr/bin/dpkg returned an error code (1) The biggest operation I held before this was updating nginx from 1.2 to 1.6 and it was thanks to this site : here is the link : How to upgrade nginx from 1.2 to 1.6 on debian 7 Please help !

  Read the article

• Plesk Uninstall Memory issue

  - by user115079

  I am trying to uninstall plesk from my VPS by running following command: yum remove sw-* psa-* plesk-* when i run this command i get following error: Running rpm_check_debug Running Transaction Test memory alloc (4 bytes) returned NULL. First time when i run above command, this mem alloc (4 bytes) was very big number like (67864987). then i googled it, got some clear/ulimit commands. executed them. rebooted my system. stopped all process and executed this command again. but still getting 4 byte issue. dont know how to get rid of it. I also tried ulimit after reboot but no success and Yes. No swap attached. these are stats of my system [root@vps ~]# free -m total used free shared buffers cached Mem: 384 67 316 0 0 0 -/+ buffers/cache: 67 316 Swap: 0 0 0 top - 21:01:07 up 3:12, 1 user, load average: 0.24, 0.08, 0.03 Tasks: 31 total, 2 running, 29 sleeping, 0 stopped, 0 zombie Cpu(s): 0.0%us, 0.0%sy, 0.0%ni,100.0%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 393216k total, 69832k used, 323384k free, 0k buffers Swap: 0k total, 0k used, 0k free, 0k cached is there any other alternative to achieve my goal to uninstall plesk? thanks.

  Read the article

• Searching SharePoint site with Windows Explorer

  - by alexsome

  Every week, I manually backup recent versions of the files on my group's SharePoint site. I open the library in Windows Explorer, search for all files modified in the past week, then copy and paste them to a network location. We need this process because our SharePoint site has a quota that we would easily meet if we had unlimited versions, so we keep a history of older versions on the network. Recently I got an upgrade to my work computer and I am unable to search the site using Windows Explorer. When I run the search for files modified in the last week no results are returned. If I run a search with no criteria on the file library, all the files are found but the "modified on" field is blank. So the search results only have the file and type fields. The new computer has Windows XP, just like the old one did. I hope this makes sense. Does anyone have any clue what the problem could be? I'd be happy to provide more info if necessary. It's bugging me to no end and I'm not even sure where to begin looking - it's either a trivial issue or a very obscure one. Thanks a lot.

  Read the article

• Experience with asymmetrical (non-identical hardware) SQL Server 2005 / Win 2003 cluster

  - by user24161

  I am reasonably good at dealing with SQL Server clusters; I am wondering if folks have experience, good or bad, using a mix of different models of servers from the same vendor in one SQL 2005 cluster. Suppose: I have one more powerful, more RAM, more shizzle box and one less powerful, less memory, less shizzle box bound together in a 2-node cluster. These would be HP DL380 and 580 machines (not that it should matter) I understand AND automate the process of managing memory for each SQL instance, so there's no memory contention when SQL instances fail over. Basically I am thinking a CLR proc will monitor the instances and self-regulate memory caps on each instance, so that they won't page or step on one another. I get the fact the instances might be slower and or under memory pressure if they share a "lesser" node, and that's OK. The business can deal with a slower instance in a server-problem scenario. Reasonable? Any "gotchas" to watch out for? More info 10/28: doing some experiments with a test cluster I find that reconfiguring max/min memory is OK PROVIDED the instance isn't already under memory pressure. If I torture the system with a huge query that demands a big chunk of RAM, and simultaneously adjust the memory allocation to a smaller value than what is being actively used, it's possible to run the instance out of memory and have it halt and restart itself (unhappy situation). Many ugly out-of-memory messages in the error log, crashing, burning... It's an extreme case, but good to know. Seems, then, that it would only be really safe to set this on startup of the instance, as in have a startup script that says "I am on node1, so my RAM settings are X or I am on node two, so they are Y," like this: http://sqlblog.com/blogs/aaron_bertrand... Update: I am testing a SQL Agent + PowerShell solution described in more detail here.

  Read the article

• Xamp on ubuntu serves php source for root url only

  - by mazaryk

  Hey, Okay, so installed xamp on my ubuntu machine, started it up and everything worked. Apache ran my php app just fine (including requests to the root url "/"). However, after the first reboot since installing, when I request "http://localhost/" apache serves up the index php page as a phtml source file. All other urls (like "http://localhost/login") work as expected. Backgound: The only modification I made to xamp was to setup a vhost for my app. The app uses an .htaccess file where I define some rewrite rules (the app is an MVC framework and all urls are rewritten to a single entry point php file). I'm using Xamp because I need php = 5.3.0. I know apache will serve up the source of a php file when it doesn't know to process php files. But the config does indeed have "AddType application/x-httpd-php .php" and as I said, the app works for all urls except the root "/" (and only since I've rebooted). The .htaccess file does contain a DirectoryIndex directive. xamp 1.3.7a Ubuntu 9.10 Any ideas?

  Read the article

• IIS Web Farm Framework servers are automatically set to "unavailable" even when they are healthy... And they never return to the available state!

  - by JohannesH

  I have 2 web farm configurations, one with 2 member servers and one with 3 member servers. I have health monitoring set up on both farms and the monitoring tool reports all servers as being healthy. However after a while all the servers are marked as being "Unavailable" and "Healthy" in the "Monitoring and Management" screen (in the "Servers" screen they are all listed with "Yes" in the "Ready for Load Balancing" column). Viewing the event log on both the web farm controller or any of farm servers doesn't reveal anything interesting. there are no warnings or errors in the period where the servers became unavailable. There are a couple of informational events about the worker process getting shut down due to inactivity but I don't hope this is the cause since that would mean that the farms will die during the night when the load is low. Am I missing something? EDIT: Btw, I think its very odd that the application pool shuts down on the servers since the health monitoring system is polling an aspx page on each server. Shouldn't that keep them going? EDIT2: Now I've also experienced this problem with the RTW version of Web Farm Framework 2.

  Read the article

• Missing Memory on Windows Server 2008

  - by Chris Lively

  I have a windows 2008 x64 server with 8GB of RAM installed. Task Manager and Resource Monitor both insist that 7.5GB of the RAM is in use. However, the memory list under Processes (Memory Private Bytes) doesn't add up. I do have Show Processes from all users checked and hand adding the numbers I come up with about 3.5GB of RAM. I also looked at the latest copy of SysInternals Process Explorer. And neither the Private Bytes or Working Set adds up to more than about 3.5GB of RAM in use. What's going on? ===== Update: I bounced the server to see what would happen with the memory utilization. After boot and regular operations began it sat at 3GB of RAM usage. 18 hours later, it's back up to 6.8GB of usage with no indication as to where the additional 3.5GB or so of RAM is being used. Here are links to screen shots of the resource monitor and task manager: Resource Monitor Task Manager Update 2: Well, I believe I located the problem. When I detached one of the larger databases from my sql server the amount of ram shown as "in use" dropped drastically. The Memory Private Bytes count barely moved. So I'm guessing that SQL server has some way of allocating memory where it doesn't really show up in any of the monitors. I went further and created a new database file, then transferred all of the data from the one I detached. Even though it has the same data, and the same transactions going through it, the memory in use has stayed low. Maybe there was some corruption in the DB? I'll leave it to the DB gods and go searching for another "problem" ;)

  Read the article

• Nginx and Wordpress side-by-side with static directory alias?

  - by user117161

  I'm a Nginx novice, but I have it set up with Wordpress Multisite (subdirectories) and php-fpm, and it's working great as is. This lets me set up Wordpress sites off the web root: domain.com/site1 - a Wordpress network single site, which renders as expected. domain.com/site2 - ditto etc. Concurrently, I can easily create static files in the web root that don't conflict or interact with Wordpress, and they are also rendered normally. domain.com/hello.html - rendered normally domain.com/hello.php - rendered normally, including php processing domain.com/static/hello.php - rendered normally (along as "static" isn't a WP single site name) What I'd like to do, and this is where I'm out of my depth with nginx.conf, is create a root directory domain.com/static and put static sites in there domain.com/static/site3 domain.com/static/site4 and have Nginx check the request that comes into the root request comes in for: domain.com/site3 and before handing off to Wordpress, check to see if it exists in the /static folder checks: domain.com/static/site3 - static content exists there and if so, serves that content while maintaining the root URI. serves: domain.com/site3 (with content from domain.com/static/site3) if not, it lets Wordpress check if /site3 is a Wordpress single network site as it does now, and the process continues normally. In nginx.conf, in the server section, I start with this try_files rule: location / { try_files $uri $uri/ /index.php?q=$uri&$args; } I then include a bunch of Wordpress specific rules as identified at http://codex.wordpress.org/Nginx under the subdirectory section. I can see that rewrite rules might take care of it easily, but in my experimentation I've only achieved a bunch of looping (/static/static/static, etc.) and managed to bypass Wordpress if the looping stopped. Sorry if this is a very long-winded way of asking a simple question, but I'm definitely learning some of this stuff for the first time. Thanks!

  Read the article

• What steps should I take to secure Tomcat 6.x?

  - by PAS

  I am in the process of setting up an new Tomcat deployment, and want it to be as secure as possible. I have created a 'jakarta' user and have jsvc running Tomcat as a daemon. Any tips on directory permissions and such to limit access to Tomcat's files? I know I will need to remove the default webapps - docs, examples, etc... are there any best practices I should be using here? What about all the config XML files? Any tips there? Is it worth enabling the Security manager so that webapps run in a sandbox? Has anyone had experience setting this up? I have seen examples of people running two instances of Tomcat behind Apache. It seems this can be done using mod_jk or with mod_proxy... any pros/cons of either? Is it worth the trouble? In case it matters, the OS is Debian lenny. I am not using apt-get because lenny only offers tomcat 5.5 and we require 6.x. Thanks!

  Read the article

• Windows Server 2008 R2 creating a multi-year client certificate using the IIS certsrv page while deploying SSTP VPN

  - by Warren P

  I am trying to follow instructions on Technet about deploying a Standard (non-enterprise) SSTP based VPN) that were originally written for Server 2008, but I am using Server 2008 R2, I have gotten as far as the part where it asks you to create a request a Server Authentication certificate. I have deployed IIS, and Active Directory Certificate Services, and chose "Standalone" and "Standard" (non-enterprise) Certificate Authority because I don't have an OID and don't think I should have to get one for a simple deployment of SSTP. The resulting certificates made by the Certification Authority "Issue" command, only have a 1 year period of validity, I want a multi-year certificate. At no point in this process is there any way to input this information unless it's through the Attributes text input area on the Advance Certificate Request page, which appears to be generated using an old ActiveX control, which means I can only do this using the workarounds in the article that I linked at the top, and only using Internet Explorer. Update:: It may be that this question is pointless since self-signed keys do not appear to work, when I try them, using Windows 8 as the VPN client. The problem is that the keys that are self-created by the technique shown here do not have any Certificate Revocation Server URLs and so you get an error "The revocation function was unable to check revocation", and the VPN connection fails.

  Read the article

• Is there a way to use VirtualBox without using it's resource registry?

  - by Catskul

  Summary VirtualBox seems to want everything to be "registered" which makes it much more annoying to work with on the command line. I'm attempting to create an automated script which will create, move, start, stop, and destroy virtual machines and virtual disks. Requiring registration will complicate the task for the following reasons. leaves state information around that can cause unpredicted edgecases causing scripts to fail. creates potential name space collisions for multiple process creating VMs with the same name moving/copying resources on the same machine is more complicated because references in the registry need to be updated copying resources (disk + vm combination) to another machine require reconfiguration once they reach their target machine, and require the transfer of extra meta data to do the reconfiguration. If something unexpectedly fails, and an unregister thus fails to happen, left over configuration information can cause problems in subsequent runs. Use Case My specific use case is for a continuous integration server which creates and destroys VMs and Disk images potentially with the same name, and would require more logic to deal with the registry's statefulness. Imaginary Example It seems that I should just be able to for example (using some imaginary and/or incorrect commands): mkdir foobar customdiskimg_script ./foo/foo.vdi vboxmanage createvm --name "foo" --ostype Linux --basefolder ./foo/foo.xml vboxmanage storagectl ./foo/foo.xml --name foo --add ide vboxmanage storageattach --storagectl foo --medium ./foo/foo.vdi ./foo/foo.xml vboxmanage startvm ./foo/foo.xml TLDR Is there a way to use virtualbox without "registering" harddisks and VMs?

  Read the article

• Setting up test an dlive enviornment - how?

  - by Sean

  I am a bit new to servers and stuff so had a question. I have my development team working on my website. They are in different countries and currently they put all the work live on the test site. But the test site is open to anyone who knows the URL. It is behind a directory but this effects my QA process because i cannot use the accurate URL structures to prevent the general public from seeing it. So what I want to do it: Have my site live on the net but only for me and my team, so like an internal network. Also I will need to mirror this to my live site when i put it live. So i guess this is something like setting up a staging and live environment. So how to do it and are both environments on the same physical server or do i need to buy two servers? And if i setup a staging environment how will i access it and my team since we are all spread out so i assume we need to log into something to access it? What about the URL - do i need a different URL for the test site or can i use the same live url for the test site? I plan to get a dedicated server + CDN for my site.

  Read the article

• Despeckle line art

  - by Dour High Arch

  We have a number of line-art charts unfortunately saved as JPEGs. They are now riddled with distracting compression artifacts or "speckles". Is there any way of removing these? I do not have the original files and it will be very difficult to recreate them. I am running Windows 7 and tried Paint.Net; none of the filters help. Posterize washed out all the colors and leaves the speckles. Blur makes text unreadable. Noise Reduction wrecks antialiasing of curved lines, and perversely enhances the speckles, making them look like checkerboards. Yes, I have Googled for software to do this; there are many programs that advertise despeckling but, after my experience with Paint.Net, do not want to experiment with applications that show no before and after images. The only example I have seen that does what I want is from a Photoshop tutorial. I have dozens of files and the tutorial requires considerable manual fine-tuning. I would prefer to automate or batch-process this task. Commercial apps are fine, but I do not want to spend over $600 and learning a complex program for a single task.

  Read the article

• Default sending all mails from the one account on Outlook 2007

  - by user45774

  I have two email accounts configured on my outlook 2007. One account is connecting to my exchange server which is the default I have another account connecting to my gmail. I want to by default send or reply all the emails that I receive on my gmail account through my exchange server account only. When I try replying to the email that I receive from the gmail account it gets defaulted to the same (gmail account). I need to manually change it to exchange server account. I want that to be changed to exchange server account by default for all the mails that I send or reply to. I don't want to do the manual process mentioned below in steps: Step 1: In the message window, click Account. Step 2: Click the account that you want to use. Is there a way to set the exchange server account for sending and replying to all emails on outlook irrespective of the number of accounts that I have on outlook. I have my outlook installed on a windows 2003 server.

  Read the article

• Relevance and Necessity of SNMP

  - by Adam Tannon

  Edit: I am in the process of designing a Java-based monitoring tool that will send back periodic "health checks" of a Java app deployed to a cluster of GlassFish servers. I am trying to figure out the best protocol for this monitoring tool to send information back to the monitoring server on. After an initial research effort on my part, it seems like SNMP is just a protocol for monitor-type applications to communicate the "health status" of something (a part of a network, a server, a cluster, an application, etc.) to the rest of the network. If the above is incorrect, please correct me!!! Assuming the generalization is more or less accurate, my next question is: why is this a protocol!?!? In the age of REST/SOAP/TCP protocols, why is there the need for a standardized protocol that only fits one type of application (monitoring)? In other words, if I'm a developer assigned to building a new monitoring tool that periodically polls a server and reports on its CPU and available memory, what advantages does SNMP give me over just POSTing to a RESTful API via plain 'ole HTTP? I'm sure I'm missing something here - I just need someone to help connect the dots! Thanks in advance!

  Read the article

• "merging" multiple internet connections

  - by Spencer R

  I've seen this question asked several times here on SF, but I'm looking for some updated information; specifically concerning Server 2012. I'm in the process of buying a home so I'm trying to get some plans together on how I want to structure my network. Internet speeds aren't the greatest and connections can be unreliable where the house is so I was thinking of having two DSL lines installed. My question is, how could I leverage those two connections to create the best network I can, in terms of speed and reliability. My parents will be moving in with me - they consume a lot of bandwidth as it is, but then add my internet traffic to it, and I'm headed for a lot of frustration. I thought I remember reading somewhere that Server 2012 has some new functionality to utilize multiple connections on multiple NICs in a way that wasn't possible in earlier versions of Server. Not sure if Windows will work but, I'm an application developer and spend the majority of my time in Windows environments. However, I've only recently returned to the Windows world, so I'd like my main server at home to run Win Server 2012 so that I can become more familiar with it.

  Read the article

• How to fix UNMOUNTABLE_BOOT_VOLUME (0x000000ED) on my Windows XP DELL laptop?

  - by Neil

  I have a Dell Latitude D410. Running Windows XP. I am receiving the STOP: 0x000000ED (0X899CF030,0XC0000185,0X00000000,0X00000000) Blue screen. Initially, I tried everything specified with the Microsoft KB articles. At this time, I was able to boot into the general safemode. I pulled the hard drive and was able to run chkdsk on it- it noted that it had fixed some errors, but I was still unable to boot. I put a brand new hard drive in the laptop. Windows XP installation worked up until the reboot, at which time the exact same error message came back up. What I have tried (all since the new hard drive was installed): chkdsk /R All suggested solutions in Microsoft KB articles Reseating RAM Opened laptop, reseated all connectors, looked for signs of damage (saw none) Reset BIOS options to default Ran the basic Dell diagnostics I have looked at the current entry:How can I boot XP after receiving stop error 0x000000ED - I am currently in the process of downloading the Ultimate Boot CD to use as a test, but I am not holding out a lot of hope as I really doubt this brand new Hard Drive is bad. Can anyone think of other areas I am missing? Ran MEMTEST86+ V4.10 for 15 passes (overnight). 0 Errors EDIT: FORMATTING

  Read the article

• Why am I getting programs stuck in log_wait_commit under Linux?

  - by staticsan

  There is something subtly wrong with my Linux install that I just can't locate. It is Ubuntu Lucid Lynx (10.04) 64-bit. Hardware is a Dell Optiplex 960: Intel Core 2 Quad CPU, 8Gb of RAM, 2x 300Gb HDDs. /home is ext2 on one disk and everything else is on the other (/ is also ext3). I have VirtualBox running a 64-bit Vista image for Outlook calendaring, but the heavyweight apps are IntelliJ, NetBeans, MySQL and Opera. Opera also loads my mail (IMAP) of which there is over 10,000 messages. The problem is that Opera stalls for a few seconds from time-to-time. Watching the process list shows it's in log_wait_commit which means (as far as I have figured out) the filesystem is holding things up. Sometimes I can make this happen by doing a subversion update, but usually it happens for no reason I can see. It usually happens to Opera, but I've seen NetBeans go under, too. It doesn't make the app crash - it's just completely unresponsive for a few seconds. Googling has not helped. The closest I got was to remove the sync attribute in the file system. This achieved nothing. On the advice of a Linux guru friend, I lowered /proc/sys/vm/dirty_writeback_centisecs to 300, but that didn't do anything, either. And it was all he could think of. What is going on and can I fix it? (And how?)

  Read the article

• How to connect android client to the localhost of Apache server (php) inside my laptop?

  - by user1796310

  I'm trying to create android apps which able sending data through wifi connection to my laptop Apache Server and MySQL database. I use the samsung galaxy tab 10.1 as my mobile device. and the protocol i used is HttpGet or HttpPost. And i use XAMPP( with Apache& SQL) to do the server and process the php. But, due to android cannot detect adhoc network from laptop, i use Virtual Router ( for window 7) to create virtual access point and make the tablet able connect to my laptop. But the problem is: [1] in my apps (client-android), where the httpget or httppost to which url? localhost in my laptop- 127.0.0.1 or localhost in android 10.0.0.1? or the ip address of the virtual router? [2]so, if i want access from android to the localhost(laptop-Apache) to call the php to run? which port? which ip address /url that i need to put in android apps(httpget)? and do i need to modify anything in httpconfig for XAMPP? thanks alot.

  Read the article

• Transfer iptables rules to another server (almost) real time

  - by MrShunz

  I'm running 2 cPanel servers with ConfigServer Security & Firewall plugin. One of the functions of the plugin is to block via iptables (temporarily and/or permanently) IPs which fail various authentications (POP3/IMAP, SMTP, FTP, webmail, mod_security and such). Now, i'd like to push those IP blocks to the border router to drop packets as soon as possible (and doing so protecting the other machines on the network). Keep in mind that after N failed logins IP is blocked for 5 minutes, then re-allowed. If multiple bans occours in an hour IP is blocked permanently and should be unlocked "by hand". So I need a near realtime solution. What I'm looking for is a better way than firing some cronjobs both on cPanels and border router to: dump the rules to file transfer the file to border router (via scp/sftp) load the rules from the file in the border router I'm aware that I will need some scripts to parse and modify the rules as cPanels have one ethernet interface and some aliases while border router has two ehternet interfaces and some loopbacks. All machines involved use Linux. EDIT as per @pjmorse comment. The plugin consists of a bunch of perl and config files. The part I'm intrested in is a process which scans logfiles (lfd) and installs iptables rules (and sends an alert email). Fact is, it upgrades quite often (one or two times a week) and itself is 7000 lines of perl so I'm not comfortable on tampering with it.

  Read the article

• Autossh startup on Ubuntu 10.04 - fails after powering off

  - by grant

  I'm using upstart to keep a reverse ssh tunnel alive using auto ssh similar to Using Upstart to Manage AutoSSH Reverse Tunnel. This works fine, except after a manual power down I can no longer connect to the machine through the "central server" using the tunnel. I receive "ssh_exchange_identification: Connection closed by remote host". The autossh process is running on the client. I can connect again after re-starting networking. I'm trying to figure out why this is failing consistently after a manual shutdown. Is it possible that I need to do some cleanup on startup that would allow the tunnel to work in this situation, or are there some other debugging/troubleshooting steps I can take to determine the problem? Machine A is the client machine, using autossh. This machine sits behind a firewall and uses the following command in upstart to create an ssh tunnel: /usr/bin/autossh -fN -i /keyfile -o StrictHostKeyChecking=no -R 20098:localhost:22 user@centralserver Machine B we'll call the "central server", which sits in the cloud and is the host. This machine is "centralserver" in the command above. When Machine A is hard powered off, and back on, I cannot connect to it by SSH'ing from my machine (C) to Machine B in the cloud, then using the following command to get to Machine A: ssh -p 2098 user@localhost Again, after a reboot of the client (A), this works fine. It is only after a hard power down that the problem occurs. There are autossh processes that are running on the client machine (A) after powering down and back up, but they just don't seem to doing their job.

  Read the article

• How to create a WHM/cPanel account, without creating a new sub-domain?

  - by Cyclops

  I have a basic VPS (full root access), with WHM/cPanel, and am learning the ropes. I'm trying to create a new account for an existing domain (mysite.com), and so far WHM won't let me - it either wants a sub-domain or fake domain, but won't allow two accounts for one domain. In the beginning, there was only the root account, and it wouldn't let me login to cPanel - a quick chat with tech support, and I am informed that I need to create a second account, which I did. So now I have an account, call it ns1me, for domain mysite.com. Now I want to create a django account. I go through the same process, but WHM won't allow me to use mysite.com as the domain for django. The docs recommend a sub-domain, so I fill the box in with django.mysite.com. I then realize that has actually created a sub-domain - going to django.mysite.com shows me its home directory, along with helpful information about what version of Apache, Python, and other mods its running (thanks, Apache). I really don't want a sub-domain, so that's out. Another chat with tech support, and they recommend a fake domain name, as it won't create anything. Sure enough, using a domain of djangomysite.com works, and WHM allows me to create a django account. But of course, I can't send email to [email protected] (where I could to [email protected]). What I want, is to be able to create a second account, associated with mysite.com (so I can run cPanel logged in as django, send email to [email protected], etc) - without creating a whole new sub-domain, or fake domain.

  Read the article

< Previous Page | 664 665 666 667 668 669 670 671 672 673 674 675  | Next Page >