Search Results

Search found 27946 results on 1118 pages for 'output buffer empty'.

Page 669/1118 | < Previous Page | 665 666 667 668 669 670 671 672 673 674 675 676 | Next Page >

Why does 12.04 upgrade abort with out of space error when I have lots of it?

- by Kristian Thomsen

When upgrading Ubuntu from 11.10 to 12.04 I discovered an unexpected problem. The upgrade was stopped because there wasn't enough free space for the installation. I managed to free some space and do the upgrade but now a prompt appears after logging in saying I'm out of space. This prompt asks me if I want to examine the problem. The "Disk Usage Analyser" is opened. In the top it says: Total filesystem capacity: 47.0 GB (used: 13.5 GB available: 33.4 GB) Folder -- Usage -- Size / -- 100% -- 12.5 GB usr -- 44.8 % -- 5.6 GB home -- 30.3 % -- 3.8 GB lib -- 13.0 % -- 1.6 GB var -- 9.1 % -- 1.1 GB boot 2.5 % 309.5 GB and a lot of small contributors like: etc, opt, sbin, bin etc. I do not really understand this problem since the analyser in the top says that I have 33.4 GB left in this file system. What can I do to make Ubuntu use the remaining space? Running df -i in the terminal gives: Filesystem Inodes IUsed IFree IUse% Mounted on /dev/sda7 610800 576874 33926 95% / udev 213451 563 212888 1% /dev tmpfs 218524 486 218038 1% /run none 218524 3 218521 1% /run/lock none 218524 7 218517 1% /run/shm /dev/sda8 2264752 16371 2248381 1% /home The output of df -h Filesystem Size Used Avail Use% Mounted on /dev/sda7 9,3G 7,8G 1,1G 88% / udev 993M 4,0K 993M 1% /dev tmpfs 401M 884K 400M 1% /run none 5,0M 0 5,0M 0% /run/lock none 1003M 152K 1002M 1% /run/shm /dev/sda8 35G 4,0G 29G 13% /home /dev/sda2 101G 64G 37G 64% /media/A2C8E28BC8E25CD3 Running sudo fdisk -l gives Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders, total 312581808 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000080 Device Boot Start End Blocks Id System /dev/sda1 63 96389 48163+ de Dell Utility /dev/sda2 * 98304 210434488 105168092+ 7 HPFS/NTFS/exFAT /dev/sda3 210436094 312576704 51070305+ f W95 Ext'd (LBA) /dev/sda5 306279288 312576704 3148708+ dd Unknown /dev/sda6 210436096 214341631 1952768 82 Linux swap / Solaris /dev/sda7 214343680 233873407 9764864 83 Linux /dev/sda8 233875456 306278399 36201472 83 Linux Partition table entries are not in disk order

Read the article
Blur gets displaced compared to original image

- by user1294203

I have implemented a SSAO and I'm using a blur step to smooth it out. The problem is that the blurred texture is slightly displaced compared to the original. I'm blurring using a 4x4 kernel since that was my noise kernel in SSAO. The following is the blurring shader: float result = 0.0; for(int i = 0; i < 4; i++){ for(int j = 0; j < 4; j++){ vec2 offset = vec2(TEXEL_SIZE.x * i, TEXEL_SIZE.y * j); result += texture(aoSampler, TexCoord + offset).r; } } out_AO = vec4(vec3(0.0), result * 0.0625); Where TEXEL_SIZE is one over my window resolution. I was thinking that this is was an error based on how OpenGL counts the Texel center, so I tried displacing the texture coordinate I was using by 0.5 * TEXEL_SIZE, but there was still a slight displacement. The texture input to my blur shader, has wrap parameters: glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_WRAP_S, GL_CLAMP); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_WRAP_T, GL_CLAMP); When I tell the blur shader to just output the the value of the pixel, the result is not displaced, so it must have something to do with how neighboring pixels are sampled. Any thoughts?

Read the article
Two new Visual WebGui released simultaneously

- by Webgui

Two new Visual WebGui versions were released simultaneously. Downloads are available here. The first is a revision to the beta version of the upcoming 6.4 which brings all-new developer/designer interface and capabilities. The second release is the latest enhancement of the current 6.3.x version. The new 6.3.15 includes the following changes over 6.3.14: Breaking Changes [1] ---------------------------------------------------------------------------------------------- VWG-6132 - [v6.3.15] Deploy language resource assemblies next to the Gizmox.WebGUI.Forms assembly location Installation puts the resources in the assemblies folder rather thatn the GAC. That way they are copied to the output folder of the app, thus enabling their deployment to the server. Bugs fixes [7] ---------------------------------------------------------------------------------------------- VWG-5714 - Help.ShowHelp of .CHM file with images should show the images VWG-6132 - [v6.3.15] Deploy language resource assemblies next to the Gizmox.WebGUI.Forms assembly location VWG-6401 - Radiobutton: The DoubleClick event should fire. VWG-6409 - The Hourglass (white/blue) Spinner icon should not display to the left on LTR cultures VWG-6452 - Calling/Causing an update on a scrollable container should not reset the scroll position. VWG-6463 - Redrawing a scrollable container does not preserve last scrolling position. VWG-6867 - Listbox: The Items selection in run time should be work correctly Enhancements [1] ---------------------------------------------------------------------------------------------- VWG-6610 - Visifire - Add a click event handler on the graph

Read the article
In *nix, how to determine which filesystem a particular file is on?

- by smokris

In a generic, modern unix environment (say, GNU/Linux, GNU/Solaris, or Mac OS X), is there a good way to determine which mountpoint and filesystem-type a particular absolute file path is on? I suppose I could execute the mount command and manually parse the output of that and string-compare it with my file path, but before I do that I'm wondering if there's a more elegant way. I'm developing a BASH script that makes use of extended attributes, and want to make it Do The Right Thing (to the small extent that it is possible) for a variety of filesystems and host environments.

Read the article
With dnsmasq as the DNS server, 'dig' and 'ping' succeed while 'nslookup' fails

- by einpoklum

I installed dnsmasq on a machine of mine (It's a Kubuntu 12.04 LTS), backed only by /etc/hosts (no connection to the Internet until later). Now, if I dig mymachine, I get 192.168.0.1, but if I try to nslookup mymachine, I get: >> connection timed out; no servers could be reached Tried also nslookup mymachine.mynicedomain.org - didn't work either. pinging (Edit:) succeeds. This happens both on the server machine itself and on other machines on the network. How can I the DNS lookups to work? What problem is preventing nslookup from succeeding? Additional Information In the server's /etc/hosts: 192.168.0.1 mymachine In the server's nsswitch.conf: hosts: files mdns4_mininal [NOTFOUND=return] dns mdns4 (admittedly, this is a bit weird; but I also tried: hosts: files dns instead, with the same effect) In resolv.conf (which is generated by dnsmasq): nameserver 127.0.0.1 search mynicedomain.org In the server's /etc/hosts.allow: domain: ALL In the other machines' /etc/resolv.conf (this is set by the DHCP client): nameserver 192.168.0.1 search mynicedomain.org Relevant netstat output on the server: Proto Recv-Q Send-Q Local Address Foreign Address State tcp 0 0 127.0.0.1:53 0.0.0.0:* LISTEN tcp 0 0 192.168.0.1:53 0.0.0.0:* LISTEN Finally, here's the ipconfig output from one of the client machines on the network (running Windows 7): Connection-specific DNS Suffix . : mynicedomain.org Description . . . . . . . . . . . : Intel(R) 82579LM Gigabit Network Connection Physical Address. . . . . . . . . : 12-34-56-78-9A-BC DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IPv4 Address. . . . . . . . . . . : 192.168.0.50(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : Sunday, October 20th 2013 16:20:25 Lease Expires . . . . . . . . . . : Sunday, October 20th 2013 18:20:24 Default Gateway . . . . . . . . . : 192.168.0.1 DHCP Server . . . . . . . . . . . : 192.168.0.1 DNS Servers . . . . . . . . . . . : 192.168.0.1 NetBIOS over Tcpip. . . . . . . . : Enabled Notes: May be related to this question.

Read the article
User Acceptance Testing Defect Classification when developing for an outside client

- by DannyC

I am involved in a large development project in which we (a very small start up) are developing for an outside client (a very large company). We recently received their first output from UAT testing of a fairly small iteration, which listed 12 'defects', triaged into three categories : Low, Medium and High. The issue we have is around whether everything in this list should be recorded as a 'defect' - some of the issues they found would be better described as refinements, or even 'nice-to-haves', and some we think are not defects at all. They client's QA lead says that it is standard for them to label every issues they identify as a defect, however, we are a bit uncomfortable about this. Whilst the relationship is good, we don't see a huge problem with this, but we are concerned that, if the relationship suffers in the future, these lists of 'defects' could prove costly for us. We don't want to come across as being difficult, or taking things too personally here, and we are happy to make all of the changes identified, however we are a bit concerned especially as there is a uneven power balance at play in our relationship. Are we being paranoid here? Or could we be setting ourselves up for problems down the line by agreeing to this classification?

Read the article
send command to an already running screen session

- by aXon

Hi I have been trying to send commands to a running gnu screen session (4.00.03) in opensolaris, but cannot get it to run any commands through any combination of screen -X Ok, I start a screen session with screen -S test, and then tried to with screen -r -X "date"to just show me the date, when I would reconnect to it. But neither an error message nor output in the screen happened. I tried with so many combinations, that I can't even remember. Any hints on how to accomplish it? The reason why I am doing this is, because I have a program, which does not come as a daemon, and I wish to start it in a screen session, so I can later on see what is going on.

Read the article
CodePlex Daily Summary for Wednesday, August 15, 2012

CodePlex Daily Summary for Wednesday, August 15, 2012Popular ReleasesTFS Workbench: TFS Workbench v2.2.0.10: Compiled installers for TFS Workbench 2.2.0.10 Bug Fix Fixed bug that stopped the change workspace action from working.MoltenMercury: MoltenMercury 1.0 beta 1: This is initial implementation of the MoltenMercury with everything running but not throughoutly tested. Release contains a zip file with program binaries and a zip file containing resources. Before using please create a new directory named data in the same directory with program executables and extract DefaultCharacter zip file in there. If you have ???????????, you can simply place executables into the same directory with the program mentioned above. MoltenMercury supports character resour...SharePoint Column & View Permission: SharePoint Column and View Permission v1.0: Version 1.0 of this project. If you will find any bugs please let me know at enti@zoznam.sk or post your findings in Issue TrackerSPListViewFilter: Version 1.6: Layout selection: http://blog.vitalyzhukov.ru/imagelibrary/120815/Settings_Layouts.pngConsoleHoster: ConsoleHoster Version 1.2: Cleanup some logging UI impreovements: Fixed the bug with _ character in project-name Fixed the bug with tab close button to be X style Fixed the style of search content bar Fixed the bug with disappearing Edit project window Moved the Clear History button to the taskbar and added also a menu item Changed the QC button to CH Applied project colors to tab headersMicrosoft Ajax Minifier: Microsoft Ajax Minifier 4.60: Allow for CSS3 grid-column and grid-row repeat syntax. Provide option for -analyze scope-report output to be in XML for easier programmatic processing; also allow for report to be saved to a separate output file.Diablo III Drop Statistics Service: 1.0: Client OnlyClosedXML - The easy way to OpenXML: ClosedXML 0.67.2: v0.67.2 Fix when copying conditional formats with relative formulas v0.67.1 Misc fixes to the conditional formats v0.67.0 Conditional formats now accept formulas. Major performance improvement when opening files with merged ranges. Misc fixes.Umbraco CMS: Umbraco 4.8.1: Whats newBug fixes: Fixed: When upgrading to 4.8.0, the database upgrade didn't run Update: unfortunately, upgrading with SQLCE is problematic, there's a workaround here: http://bit.ly/TEmMJN The changes to the <imaging> section in umbracoSettings.config caused errors when you didn't apply them during the upgrade. Defaults will now be used if any keys are missing Scheduled unpublishes now only unpublishes nodes set to published rather than newest Work item: 30937 - Fixed problem with Fi...MySqlBackup.NET - MySQL Backup Solution for C#, VB.NET, ASP.NET: MySqlBackup.NET 1.4.4 Beta: MySqlBackup.NET 1.4.4 beta Fix bug: If the target database's default character set is not UTF8, UTF8 character will be encoded wrongly during Import. Now, database default character set will be recorded into Dump File at line of "SET NAMES". During import(restore), MySqlBackup will again detect and use the target database default character char set. MySqlBackup.NET 1.4.2 beta Fix bug: MySqlConnection is not closed when AutoCloseConnection set to true after Export or Import completed/halted. M...patterns & practices - Unity: Unity 3.0 for .NET 4.5 and WinRT - Preview: The Unity 3.0.1208.0 Preview enables Unity to work on .NET 4.5 with both the WinRT and desktop profiles. This is an updated version of the port after the .NET Framework 4.5 and Windows 8 have RTM'ed. Please see the Release Notes Providing feedback Post your feedback on the Unity forum Submit and vote on new features for Unity on our Uservoice site.LiteBlog (MVC): LiteBlog 1.31: Features of this release Windows8 styled UI Namespace and code refactoring Resolved the deployment issues in the previous release Added documentation Help file Help file is HTML based built using SandCastle Help file works in all browsers except IE10Self-Tracking Entity Generator for WPF and Silverlight: Self-Tracking Entity Generator v 2.0.0 for VS11: Self-Tracking Entity Generator for WPF and Silverlight v 2.0.0 for Entity Framework 5.0 and Visual Studio 2012Coding4Fun Tools: Coding4Fun.Phone.Toolkit v1.6.0: New Stuff ImageTile Control - think People Tile MicrophoneRecorder - Coding4Fun.Phone.Audio GzipWebClient - Coding4Fun.Phone.Net Serialize - Coding4Fun.Phone.Storage this is code I've written countless times. JSON.net is another alternative ChatBubbleTextBox - Added in Hint TimeSpan languages added: Pl Bug Fixes RoundToggleButton - Enable Visual State not being respected OpacityToggleButton - Enable Visual State not being respected Prompts VS Crash fix for IsPrompt=true More...AssaultCube Reloaded: 2.5.2 Unnamed: Linux has Ubuntu 11.10 32-bit precompiled binaries and Ubuntu 10.10 64-bit precompiled binaries, but you can compile your own as it also contains the source. If you are using Mac or other operating systems, please wait while we try to pack it. Try to compile it. If it fails, download a virtual machine. The server pack is ready for both Windows and Linux, but you might need to compile your own for Linux (source included) Added 3rd person Added mario jumps Fixed nextprimary code exploit ...NPOI: NPOI 2.0: New features a. Implement OpenXml4Net (same as System.Packaging from Microsoft). It supports both .NET 2.0 and .NET 4.0 b. Excel 2007 read/write library (NPOI.XSSF) c. Word 2007 read/write library(NPOI.XWPF) d. NPOI.SS namespace becomes the interface shared between XSSF and HSSF e. Load xlsx template and save as new xlsx file (partially supported) f. Diagonal line in cell both in xls and xlsx g. Support isRightToLeft and setRightToLeft on the common spreadsheet Sheet interface, as per existin...BugNET Issue Tracker: BugNET 1.1: This release includes bug fixes from the 1.0 release for email notifications, RSS feeds, and several other issues. Please see the change log for a full list of changes. http://support.bugnetproject.com/Projects/ReleaseNotes.aspx?pid=1&m=76 Upgrade Notes The following changes to the web.config in the profile section have occurred: Removed <add name="NotificationTypes" type="String" defaultValue="Email" customProviderData="NotificationTypes;nvarchar;255" />Added <add name="ReceiveEmailNotifi...????: ????2.0.5: 1、?????????????。RiP-Ripper & PG-Ripper: PG-Ripper 1.4.01: changes NEW: Added Support for Clipboard Function in Mono Version NEW: Added Support for "ImgBox.com" links FIXED: "PixHub.eu" links FIXED: "ImgChili.com" links FIXED: Kitty-Kats Forum loginPlayer Framework by Microsoft: Player Framework for Windows 8 (Preview 5): Support for Smooth Streaming SDK beta 2 Support for live playback New bitrate meter and SD/HD indicators Auto smooth streaming track restriction for snapped mode to conserve bandwidth New "Go Live" button and SeekToLive API Support for offset start times Support for Live position unique from end time Support for multiple audio streams (smooth and progressive content) Improved intellisense in JS version Support for Windows 8 RTM ADDITIONAL DOWNLOADSSmooth Streaming Client SD...New ProjectsA Java Open Platform: A Java Open PlatformAutomation Tools: noneAzManPermissions: Allows AzMan (Authorization Manager) operation permission checks declaratively and imperatively. It can connect to AzMan stores directly or through a service.Configuration Manager 2012 Automation: Configuration Manager 2012 Automation is a powershell project to help perform the basic implementation of a CM12 infrastructure...Dynamicweb Blog Engine 2012: A simple blog engine built on Dynamicweb.E Lixo: Projeto E_LIXOEasy Windows Service Manager: Easy Windows Service Manager (ewsm) is a desktop utility that enables the easily management of Windows services. flexwork: A Flex Pluggable Extension FrameworkGit On Codeplex: Just trying git on CodePlexGT.BlogBox: Blogsite-Webtemplate for SharePoint 2010gvPoco: gvPoco is a .NET class library for the Google Visualization Charts API. IAllenSoft: IAllenSoft is a silverlight control library, which originates from some idea. Its target is to improve development productivity for silverlight projects. ListNetRanker: ListNetRanker is a listwise ranker based on machine learning. Given documents and query's feature set, ListNetRanker will rank these documents by ranking score.lvyao: stillMetro Tic-Tac-Toe: Tic-Tac-Toe is a Windows 8 developed using MonoGame for Windows 8. The intent of this code is to help XNA developers with porting their XNA apps to Windows 8myProject: my private code Nintemulator: Nintemulator is a work in progress multi-system emulator. Plans for emulated systems are NES, SNES, GB/GBC, GBA.Picnic Game: Picnic Game is a 2D game written in Small Basic. The objective is to get the pizza to the basket before you get stung or time runs out.Picnic Level Editor: Picnic Game is a 2D 3rd person game where you are an ant, and you have to gather the pizza and bring it to the basket before you get stung by a bee.ResCom: ResCom is a community response system for Windows Phone 8Scalable Object Persistence (SOP) Framework: Scalable object persistence (SOP) framework. RDBMS "index" like performance and scale on data Stores but without the unnecessary baggage, fine grained control.self-balancing-avl-tree: Self balancing AVL tree with Concat and Split operations.SEMS(synthetical evaluation management system): that's itsergionadal-mvc: Mvc para sistemas AndroidTFS Test Plan Builder: TFS Test plan builder is a tool to assis users of Microst Test Manager to build new test plans then moving from sprint to sprint or release to release The Excel Library: DExcelLibrary is a project that allows you to load and display "any" excel file given a specificaction of with areas/grids to loadTimePunch Metro Wpf Library: This library contains WPF controls and MVVM Implementation to create touch optimized applications in the new Windows 8 UI style formerly known as "Metro". UniPie: UniPie is a system wide pie menu system for sending key-mouse button combinations to certain applications. It can also convert one combo to another.xref: This is an extension of the classic FizzBuzz problem.ZombieRPG: Basic Zombie RPG game made using Game Maker??????: ZHJP

Read the article
Jenkins shows same information for all projects

- by SuperCabbage

I've been using Jenkins for the last month or so and what started out as a small issue has gotten worse and worse. I have 10 projects in Jenkins, all polling from different Git repos and building to different environments but they all show the same details on the dashboard. I can still build the projects, but I have to manually enter the URL to see any console output etc. I'm running 1.536 under Ubuntu 12.04, there's not much in the logs other than the following; Oct 22, 2013 2:21:19 PM WARNING jenkins.model.lazy.AbstractLazyLoadRunMap search JENKINS-15652 Assertion error #1: failing to load /data/builds #20 EXACT: lo=23,hi=9,size=23,size2=23 – Any ideas?

Read the article
Why are my at jobs running immediately on OS X?

- by Gabe

I want to schedule events for exact times in Mac OS X. It seems like the 'at' command is the simplest way to do this. I have enabled atrun using the command: launchctl load -w /System/Library/LaunchDaemons/com.apple.atrun.plist To test at, I'm using the following one-line BASH script: echo 'foo' path/to/log.txt | at now + 2 minutes When I run the script, I get output like: job 17 at Sat May 15 12:57:00 2010 where '12:57:00' is indeed 2 minutes in the future. But the echo command executes immediately: the line 'foo' is added to log.txt right away. How can I make at work for me?

Read the article
Repartition Ubuntu by command line?

- by DisgruntledGoat

On my server the filesystem includes these partitions: Filesystem Size Used Avail Use% Mounted on /dev/sda6 4.6G 929M 3.5G 21% / /dev/sda5 76M 20M 53M 27% /boot /dev/sda8 449G 199M 426G 1% /home /dev/sda7 4.6G 4.4G 0 100% /var (Output from df -ah) I'm storing the web sites and databases under /var and as you can see it's got full. The /home folder just has basic user directories and nothing else so I'd like to repartition the server so that /dev/sda8 is about 5GB, with the rest going to dev/sda7. What's the easiest way to do this via command line (i.e. SSH)?

Read the article
Simple NNTP clent for Ubuntu

- by Alexander Gladysh

I need to download a particular NNTP group. I do not need to setup any crons, put group contents in /opt and other stuff. Just run <fetch-nntp> <server> <group-name> <output-dir> and be done with it without putting a lot of garbage in the system. If that <fetch-nntp> would not fetch the same messages on the second run — fine. But I can live without it. All NNTP clients that I've looked at are trying to be a NNTP server as well. Is there something simpler that is suitable for my needs?

Read the article
Local Area Connection in Slacware 13

- by asdasd

I have windows xp and slackware 13 on one computer, and the ISP provided me a new modem. There was manual how to configure it, so i start the web browser and typed it's ip address 192.168.1.1 and the web interface of the modem appeared so i logged in, that was easy. But under slackware, i don't know how to enter in the modem config / web interface. I type in 192.168.1.1 but it's not working. Here's the output of ifconfig eth0 : eth0 Link encap:Ethernet HWaddr 00:a1:b0:01:18:28 inet addr:169.254.73.8 Bcast:169.254.255.255 Mask:255.255.0.0 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:17 Memory:febff400-febff4ff How can i log in into the modem from linux, i.e. find it's assigned ip under slackware ? Thank you.

Read the article
Crawling a Content Folio

- by Kyle Hatlestad

Content Folios in WebCenter Content allow you to assemble, track, and access a logical group of documents and/or links. It allows you to manage them as just a list of items (simple folio) or organized as a hierarchy (advanced folio). The built-in UI in content server allows you to work with these folios, but publishing them or consuming them externally can be a bit of a challenge. The folios themselves are actually XML files that contain the structure, attributes, and pointers to the content items. So to publish this somewhere, such as a Site Studio page, you could perhaps use an XML parser to traverse the structure and create your output. But XML parsers are not always the easiest or most efficient to use. In order to more easily crawl and consume a Content Folio, Ed Bryant - Principal Sales Consultant, wrote a component to do just that. His component adds a service which does all the work for you and returns the folio structure as a simple resultset. So consuming and publishing that folio on a Site Studio page or in your portal using RIDC is a breeze! For example, let's take an advanced Content Folio example like this: If we look at the native file, the XML looks like this: But if we access the folio using the new service - http://server/cs/idcplg?IdcService=FOLIO_CRAWL&dDocName=ecm008003&IsPageDebug=1 - this is what the result set looks like (using the IsPageDebug parameter). Given this as the result set, it makes it very easy to consume and repurpose that folio. You can download a copy of the sample component here. Special thanks to Ed for letting me share this component!

Read the article
Retrieving Custom Attributes Using Reflection

- by Scott Dorman

The .NET Framework allows you to easily add metadata to your classes by using attributes. These attributes can be ones that the .NET Framework already provides, of which there are over 300, or you can create your own. Using reflection, the ways to retrieve the custom attributes of a type are: System.Reflection.MemberInfo public abstract object[] GetCustomAttributes(bool inherit); public abstract object[] GetCustomAttributes(Type attributeType, bool inherit); public abstract bool IsDefined(Type attributeType, bool inherit); System.Attribute public static Attribute[] GetCustomAttributes(MemberInfo member, bool inherit); public static bool IsDefined(MemberInfo element, Type attributeType, bool inherit); If you take the following simple class hierarchy: public abstract class BaseClass { private bool result; [DefaultValue(false)] public virtual bool SimpleProperty { get { return this.result; } set { this.result = value; } } } public class DerivedClass : BaseClass { public override bool SimpleProperty { get { return true; } set { base.SimpleProperty = value; } } } Given a PropertyInfo object (which is derived from MemberInfo, and represents a propery in reflection), you might expect that these methods would return the same result. Unfortunately, that isn’t the case. The MemberInfo methods strictly reflect the metadata definitions, ignoring the inherit parameter and not searching the inheritance chain when used with a PropertyInfo, EventInfo, or ParameterInfo object. It also returns all custom attribute instances, including those that don’t inherit from System.Attribute. The Attribute methods are closer to the implied behavior of the language (and probably closer to what you would naturally expect). They do respect the inherit parameter for PropertyInfo, EventInfo, and ParameterInfo objects and search the implied inheritance chain defined by the associated methods (in this case, the property accessors). These methods also only return custom attributes that inherit from System.Attribute. This is a fairly subtle difference that can produce very unexpected results if you aren’t careful. For example, to retrieve the custom attributes defined on SimpleProperty, you could use code similar to this: PropertyInfo info = typeof(DerivedClass).GetProperty("SimpleProperty"); var attributeList1 = info.GetCustomAttributes(typeof(DefaultValueAttribute), true)); var attributeList2 = Attribute.GetCustomAttributes(info, typeof(DefaultValueAttribute), true)); The attributeList1 array will be empty while the attributeList2 array will contain the attribute instance, as expected. Technorati Tags: Reflection,Custom Attributes,PropertyInfo

Read the article
PHP rand function (or not so rand)

- by Badr Hari

I was testing PHP rand function to write on a image. Of course the output shows that it's not so random. The code I used: <?php header('Content-Type: image/png'); $lenght = 512; $im = imagecreatetruecolor($lenght, $lenght); $blue = imagecolorallocate($im, 0, 255, 255); for ($y = 0; $y < $lenght; $y++) { for ($x = 0; $x < $lenght; $x++) { if (rand(0,1) == 0) { imagesetpixel($im, $x, $y, $blue); } } } imagepng($im); imagedestroy($im); ?> My question is, if I use image width/lenght (variable $lenght in this example) number like 512, 256 or 1024, it is very clear that it's not so random. When I change the variable to 513 for an example, it is so much harder for human eye to detect it. Why is that? What is so special about these numbers? 512: 513: Edit: I'm running xampp on Windows to test it.

Read the article
Why cant I get 3 monitors working with my ati 5770

- by G-Dogg

I have an ati 5770, card with vga, dvi and hdmi output. I can only get 2 out of the 3 monitors working at once, however i can change the configuation so that all monitors can be selected, but only 2 will work at once.. 2 of my monitors have dvi inputs and one has vga. in my catyalist control center it shows all 3 monitors are there but either 2 can be selected at a time, and so the same with my windows 7. I have and adapter which i use on the 3rd monitor, hdmi-dvi adaptor and it works. also when i boot up my pc i get 2 monitors booting up and when windows starts the 3rd monitor boots but the 1st one closes. I looked at my package box and it actualy does specify ati eyefinity technology is available with this card. why wont it work???

Read the article
Problems compiling with Quickly

- by espectalll123

Welcome to another of my questions about compiling! :P So, after days of stress trying to compile my app, first manually, after porting the project to Quickly, I decided to create the project from scratch using this time Quickly. Now I've finished the app, it works great using quickly run and I haven't added any new file, just removed, replaced or modified. But it can't be compiled using quickly package --verbose --extras... why, if there doesn't seems to be errors related with my project? The fail happens because python-mkdebian doesn't haves enough parameters to work. The terminal output (in Spanish): running install_egg_info Writing /tmp/tmpsT6Pms/virtuam-0.1.egg-info WARNING: the following files are not recognized by DistUtilsExtra.auto: help/C/figures/icon.png help/C/index.page help/C/preferences.page help/C/topic1.page virtuam.desktop.in Traceback (most recent call last): File "/usr/bin/python-mkdebian", line 368, in <module> egg = get_egg_info() File "/usr/bin/python-mkdebian", line 35, in get_egg_info k, v = l.strip().split(': ', 1) ValueError: need more than 1 value to unpack Ha ocurrido un error al crear el paquete Debian ERROR: no se puede crear o actualizar paquete ubuntu Error: la orden package ha fallado Cancelando

Read the article
FFMPEG Segfault Solutions

- by Brentley_11

I'm trying to convert a bunch of movies into h.264 mp4's using FFMPEG. These movies are sourced from various portable camcorders such as the Flip Mino HD and the Kodak ZI8. One issue I'm having with video from the ZI8 is it seems to be causing FFMPEG to segfault. Here is my command: ffmpeg -i 'XmasSailor720p60fps.MOV' -threads 2 -acodec libfaac -ab 96kb -vcodec libx264 -vpre hq -b 500kb -s 484x272 XmasSailor.mp4 Here is the output: FFmpeg version SVN-r20668, Copyright (c) 2000-2009 Fabrice Bellard, et al. built on Dec 2 2009 18:37:34 with gcc 4.2.4 (Ubuntu 4.2.4-1ubuntu4) configuration: --enable-libfaac --enable-libfaad --enable-libmp3lame --enable-libx264 --enable-gpl --enable-nonfree --enable-postproc --enable-pthreads --enable-shared libavutil 50. 5. 1 / 50. 5. 1 libavcodec 52.42. 0 / 52.42. 0 libavformat 52.39. 2 / 52.39. 2 libavdevice 52. 2. 0 / 52. 2. 0 libswscale 0. 7. 2 / 0. 7. 2 libpostproc 51. 2. 0 / 51. 2. 0 Seems stream 0 codec frame rate differs from container frame rate: 59.94 (60000/1001) -> 29.97 (30000/1001) Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'XmasSailor720p60fps.MOV': Duration: 00:00:05.37, start: 0.000000, bitrate: 12021 kb/s Stream #0.0(eng): Video: h264, yuv420p, 1280x720 [PAR 1:1 DAR 16:9], 11994 kb/s, 29.97 tbr, 90k tbn, 59.94 tbc Stream #0.1(eng): Audio: aac, 48000 Hz, stereo, s16, 128 kb/s Metadata major_brand : qt minor_version : 0 compatible_brands: qt comment : KODAK Zi8 Pocket Video Camera comment-eng : KODAK Zi8 Pocket Video Camera [libx264 @ 0x99e1020]using SAR=1/1 [libx264 @ 0x99e1020]using cpu capabilities: MMX2 SSE2Fast SSSE3 FastShuffle SSE4.1 Cache64 [libx264 @ 0x99e1020]profile High, level 2.1 Output #0, mp4, to 'XmasSailor.mp4': Stream #0.0(eng): Video: libx264, yuv420p, 484x272 [PAR 1:1 DAR 121:68], q=10-51, 500 kb/s, 30k tbn, 29.97 tbc Stream #0.1(eng): Audio: aac, 48000 Hz, stereo, s16, 96 kb/s Metadata comment : Encoded with the Statusfirm Video Transcoder Stream mapping: Stream #0.0 -> #0.0 Stream #0.1 -> #0.1 Press [q] to stop encoding [h264 @ 0x99de950]B picture before any references, skipping [h264 @ 0x99de950]decode_slice_header error [h264 @ 0x99de950]no frame! Error while decoding stream #0.0 [h264 @ 0x99de950]B picture before any references, skipping [h264 @ 0x99de950]decode_slice_header error [h264 @ 0x99de950]no frame! Error while decoding stream #0.0 frame= 20 fps= 0 q=13797729.0 size= 0kB time=0.66 bitrate= 0.6kbits/s frame= 39 fps= 37 q=13797729.0 size= 0kB time=1.30 bitrate= 0.3kbits/s frame= 48 fps= 30 q=33.0 size= 11kB time=0.10 bitrate= 903.0kbits/s frame= 58 fps= 27 q=31.0 size= 22kB time=0.43 bitrate= 421.0kbits/s frame= 67 fps= 25 q=29.0 size= 41kB time=0.73 bitrate= 462.6kbits/s frame= 75 fps= 23 q=29.0 size= 59kB time=1.00 bitrate= 486.7kbits/s frame= 83 fps= 22 q=29.0 size= 81kB time=1.27 bitrate= 521.9kbits/s frame= 90 fps= 21 q=29.0 size= 97kB time=1.50 bitrate= 530.1kbits/s frame= 98 fps= 20 q=29.0 size= 114kB time=1.77 bitrate= 526.9kbits/s frame= 106 fps= 20 q=29.0 size= 134kB time=2.04 bitrate= 537.7kbits/s frame= 114 fps= 19 q=29.0 size= 150kB time=2.30 bitrate= 533.7kbits/s frame= 122 fps= 19 q=29.0 size= 172kB time=2.57 bitrate= 547.8kbits/s frame= 130 fps= 19 q=29.0 size= 193kB time=2.84 bitrate= 557.5kbits/s frame= 136 fps= 18 q=29.0 size= 211kB time=3.04 bitrate= 570.0kbits/s frame= 144 fps= 18 q=29.0 size= 242kB time=3.30 bitrate= 599.5kbits/s frame= 152 fps= 17 q=30.0 size= 261kB time=3.57 bitrate= 598.6kbits/s frame= 157 fps= 15 q=-1.0 Lsize= 368kB time=5.21 bitrate= 579.3kbits/s video:302kB audio:61kB global headers:0kB muxing overhead 1.416371% [libx264 @ 0x99e1020]frame I:1 Avg QP:27.22 size: 8720 [libx264 @ 0x99e1020]frame P:48 Avg QP:25.15 size: 3759 [libx264 @ 0x99e1020]frame B:108 Avg QP:30.10 size: 1105 [libx264 @ 0x99e1020]consecutive B-frames: 0.6% 11.5% 28.8% 59.0% [libx264 @ 0x99e1020]mb I I16..4: 28.5% 47.6% 23.9% [libx264 @ 0x99e1020]mb P I16..4: 0.8% 1.3% 0.5% P16..4: 50.6% 17.7% 13.1% 0.0% 0.0% skip:15.9% [libx264 @ 0x99e1020]mb B I16..4: 0.2% 0.3% 0.1% B16..8: 44.0% 1.2% 2.6% direct: 5.1% skip:46.5% L0:45.5% L1:51.0% BI: 3.5% [libx264 @ 0x99e1020]final ratefactor: 23.51 [libx264 @ 0x99e1020]8x8 transform intra:49.9% inter:67.9% [libx264 @ 0x99e1020]direct mvs spatial:98.1% temporal:1.9% [libx264 @ 0x99e1020]coded y,uvDC,uvAC intra: 54.7% 76.1% 41.4% inter: 17.1% 24.4% 7.8% [libx264 @ 0x99e1020]i16 v,h,dc,p: 18% 52% 5% 25% [libx264 @ 0x99e1020]i8 v,h,dc,ddl,ddr,vr,hd,vl,hu: 12% 22% 9% 7% 10% 10% 9% 8% 13% [libx264 @ 0x99e1020]i4 v,h,dc,ddl,ddr,vr,hd,vl,hu: 13% 18% 8% 8% 10% 13% 10% 9% 12% [libx264 @ 0x99e1020]Weighted P-Frames: Y:10.4% [libx264 @ 0x99e1020]ref P L0: 60.2% 15.3% 11.0% 7.6% 5.2% 0.7% [libx264 @ 0x99e1020]ref B L0: 72.6% 15.6% 11.8% [libx264 @ 0x99e1020]kb/s:471.17 Segmentation fault I'm wondering if anyone else has ran into similar issues. I wasn't able to find anything helpful via Google. Another question I have is if anyone knows of a company that offers paid support for FFMPEG. Thank you for your time.

Read the article
Powershell variables to string

- by Mike Koerner

I'm new to powershell. I'm trying to write an error handler to wrap around my script. Part of the error handler is dumping out some variable settings. I spent a while trying to do this and couldn't google a complete solution so I thought I'd post something. I want to display the $myinvocation variable. In powershell you can do this PS C:\> $myInvocation for my purpose I want to create a stringbuilder object and append the $myinvocation info. I tried this $sbOut = new-object System.Text.Stringbuilder $sbOut.appendLine($myinvocation) $sbOut.ToString() This produces Capacity MaxCapacity Length -------- ----------- ------ 86 2147483647 45 System.Management.Automation.InvocationInfo This is not what I wanted so I tried $sbOut.appendLine(($myinvocation|format-list *)) This produced Capacity MaxCapacity Length -------- ----------- ------ 606 2147483647 305 Microsoft.PowerShell.Commands.Internal.Format.FormatStartData Microsoft.PowerShell.Commands.Internal.Format.GroupStartData Micros oft.PowerShell.Commands.Internal.Format.FormatEntryData Microsoft.PowerShell.Commands.Internal.Format.GroupEndData Microsoft.Powe rShell.Commands.Internal.Format.FormatEndData Finally I figured out how to produce what I wanted: $sbOut = new-object System.Text.Stringbuilder [void]$sbOut.appendLine(($myinvocation|out-string)) $sbOut.ToString() MyCommand : $sbOut = new-object System.Text.Stringbuilder [void]$sbOut.appendLine(($myinvocation|out-string)) $sbOut.ToString() BoundParameters : {} UnboundArguments : {} ScriptLineNumber : 0 OffsetInLine : 0 HistoryId : 13 ScriptName : Line : PositionMessage : InvocationName : PipelineLength : 2 PipelinePosition : 1 ExpectingInput : False CommandOrigin : Runspace Note the [void] in front of the stringbuilder variable doesn't show the Capacity,MaxCapacity of the stringbuilder object. The pipe to out-string makes the output a string. It's not pretty but it works.

Read the article
How can I convert a 2D bitmap (Used for terrain) to a 2D polygon mesh for collision?

- by Megadanxzero

So I'm making an artillery type game, sort of similar to Worms with all the usual stuff like destructible terrain etc... and while I could use per-pixel collision that doesn't give me collision normals or anything like that. Converting it all to a mesh would also mean I could use an existing physics library, which would be better than anything I can make by myself. I've seen people mention doing this by using Marching Squares to get contours in the bitmap, but I can't find anything which mentions how to turn these into a mesh (Unless it refers to a 3D mesh with contour lines defining different heights, which is NOT what I want). At the moment I can get a basic Marching Squares contour which looks something like this (Where the grid-like lines in the background would be the Marching Squares 'cells'): That needs to be interpolated to get a smoother, more accurate result but that's the general idea. I had a couple ideas for how to turn this into a mesh, but many of them wouldn't work in certain cases, and the one which I thought would work perfectly has turned out to be very slow and I've not even finished it yet! Ideally I'd like whatever I end up using to be fast enough to do every frame for cases such as rapidly-firing weapons, or digging tools. I'm thinking there must be some kind of existing algorithm/technique for turning something like this into a mesh, but I can't seem to find anything. I've looked at some things like Delaunay Triangulation, but as far as I can tell that won't correctly handle concave shapes like the above example, and also wouldn't account for holes within the terrain. I'll go through the technique I came up with for comparison and I guess I'll see if anyone has a better idea. First of all interpolate the Marching Squares contour lines, creating vertices from the line ends, and getting vertices where lines cross cell edges (Important). Then, for each cell containing vertices create polygons by using 2 vertices, and a cell corner as the 3rd vertex (Probably the closest corner). Do this for each cell and I think you should have a mesh which accurately represents the original bitmap (Though there will only be polygons at the edges of the bitmap, and large filled in areas in between will be empty). The only problem with this is that it involves lopping through every pixel once for the initial Marching Squares, then looping through every cell (image height + 1 x image width + 1) at least twice, which ends up being really slow for any decently sized image...

Read the article
Disable public Tomcat6 stack trace

- by The NinjaSysadmin

Can anyone advise me how I can go about disabling Tomcat6 from displaying stacktrace output to the browser? Tomcat: 6.0.29 I have made the following changes to /opt/apache-tomcat-6.0.29/conf/web.xml <error-page> <exception-type>java.lang.Throwable</exception-type> <location>/error.jsp</location> </error-page> I'm told putting this in place will give a white screen if the file doesn't exist, however I'm getting stack traces to the screen.

Read the article
Is there a path from OpenSCAD to WebGL?

- by Andrew Domaszek

tl;dr version, Does a software path exist to convert from openscad input to render on a website via webgl? What I'm trying to do is display OpenSCAD created designs uploaded via post on a LEMPy driven website; this is currently done by outputting to a static png image. I would like to render one of openscad's export formats(wikibooks) and convert for display in javascript/webgl through some software path available via linux batch. CPU and RAM are relatively unconstrained but no GPU available. I've looked into CopperLeicht, but it requires CopperCube output which would require windows or wine. FOSS is preferred but not required. edit: I found three.js has converters for fbx, dae, obj, and 3ds formats which might be helpful as one of the last steps.

Read the article
Cannot connect puppet agent to puppet master

- by u123

I have installed puppet 3.3.1 on a debian 7 machine (test-puppet-master) and the puppet agent on another debian 7 machine (test-puppet-agent/192.11.80.246) acting as a client. I start the master with: puppet master --verbose --no-daemonize And I start the agent with: puppet agent --server=test-puppet-master --no-daemonize --verbose Notice: Did not receive certificate which gives the following output on the master: Notice: Starting Puppet master version 3.3.1 Error: Could not resolve 192.11.80.246: no name for 192.11.80.246 Info: Inserting default '~ ^/catalog/([^/]+)$' (auth true) ACL Info: Inserting default '~ ^/node/([^/]+)$' (auth true) ACL Info: Inserting default '/file' (auth ) ACL Info: Inserting default '/certificate_revocation_list/ca' (auth true) ACL Info: Inserting default '~ ^/report/([^/]+)$' (auth true) ACL Info: Inserting default '/certificate/ca' (auth any) ACL Info: Inserting default '/certificate/' (auth any) ACL Info: Inserting default '/certificate_request' (auth any) ACL Info: Inserting default '/status' (auth true) ACL Info: Not Found: Could not find certificate test-puppet-agent Error: Could not resolve 192.11.80.246: no name for 192.11.80.246 Info: Not Found: Could not find certificate test-puppet-agent Error: Could not resolve 192.11.80.246: no name for 192.11.80.246 Info: Not Found: Could not find certificate test-puppet-agent Any ideas why the agent cannot connect?

Read the article
Cannot copy MP3 files from a CD

- by MountainX

I purchased a set of spoken word audio CD's that have MP3 and FLAC audio files; I think they also play as regular audio CD's because I see a CDA directory and .cda files. But I'm only interested in playing the MP3 files by copying them to my phone. Dolphin file manager shows all the files on the CD. However, it will not copy any of them to my hard drive, which is what my goal is. Dolphin shows no error, but the copy progress is zero. Amarok will play the files but not easily. I only tried the flac files. To play a file, I click the file in Dolphin, then I have to cancel a job using KDE's notification system, then Amarok proceeds to copy the file to a tmp directory which takes a long time, then it finally plays. kb3 will rip the audio, but I would prefer to copy the files directly from the CD. Since Dolphin would not copy the files, I thought I would try the terminal, but I can't get that to work either. mount -t auto -o ro /dev/sr0 /mnt/temp that gives the error: wrong fs type, bad option, bad superblock, etc. I get the same error using -t iso9660 and -t udf. so I started troubleshooting: ~$ wodim --devices wodim: Overview of accessible drives (1 found) : ------------------------------------------------------------------------- 0 dev='/dev/sg1' rwrw-- : 'MATSHITA' 'DVD-RAM UJ8A0AS' ------------------------------------------------------------------------- /dev/sg1 is not a block device sudo file -s /dev/sr0 ERROR: cannot read /dev/sr0 (input/output error) sudo file -s /dev/sg1 just hangs How can I copy these files to my computer hard disk?

Read the article

< Previous Page | 665 666 667 668 669 670 671 672 673 674 675 676 | Next Page >