Search Results

Search found 1742 results on 70 pages for 'combine'.

Page 67/70 | < Previous Page | 63 64 65 66 67 68 69 70  | Next Page >

• Ingredient Substitutes while Baking

  - by Rekha

  In our normal cooking, we substitute the vegetables for the gravies we prepare. When we start baking, we look for a good recipe. At least one or two ingredient will be missing. We do not know where to substitute what to bring same output. So we finally drop the plan of baking. Again after a month, we get the interest in baking. Again one or two lack of ingredient and that’s it. We keep on doing this for months. When I was going through the cooking blogs, I came across a site with the Ingredient Substitutes for Baking: (*) is to indicate that this substitution is ideal from personal experience. Flour Substitutes ( For 1 cup of Flour) All Purpose Flour 1/2 cup white cake flour plus 1/2 cup whole wheat flour 1 cup self-rising flour (omit using salt and baking powder if the recipe calls for it since self raising flour has it already) 1 cup plus 2 tablespoons cake flour 1/2 cup (75 grams) whole wheat flour 7/8 cup (130 grams) rice flour (starch) (do not replace all of the flour with the rice flour) 7/8 cup whole wheat Bread Flour 1 cup all purpose flour 1 cup all purpose flour plus 1 teaspoon wheat gluten (*) Cake Flour Place 2 tbsp cornstarch in 1 cup and fill the rest up with All Purpose flour (*) 1 cup all purpose flour minus 2 tablespoons Pastry flour Place 2 tbsp cornstarch in 1 cup and fill the rest up with All Purpose flour Equal parts of All purpose flour plus cake flour (*) Self-rising Flour 1½ teaspoons of baking powder plus ½ teaspoon of salt plus 1 cup of all-purpose flour. Cornstarch (1 tbsp) 2 tablespoons all-purpose flour 1 tablespoon arrowroot 4 teaspoons quick-cooking tapioca 1 tablespoon potato starch or rice starch or flour Tapioca (1 tbsp) 1 – 1/2 tablespoons all-purpose flour Cornmeal (stone ground) polenta OR corn flour (gives baked goods a lighter texture) if using cornmeal for breading,crush corn chips in a blender until they have the consistency of cornmeal. maize meal Corn grits Sweeteners ( for Every 1 cup ) * * (HV) denotes Healthy Version for low fat or fat free substitution in Baking Light Brown Sugar 2 tablespoons molasses plus 1 cup of white sugar Dark Brown Sugar 3 tablespoons molasses plus 1 cup of white sugar Confectioner’s/Powdered Sugar Process 1 cup sugar plus 1 tablespoon cornstarch Corn Syrup 1 cup sugar plus 1/4 cup water 1 cup Golden Syrup 1 cup honey (may be little sweeter) 1 cup molasses Golden Syrup Combine two parts light corn syrup plus one part molasses 1/2 cup honey plus 1/2 cup corn syrup 1 cup maple syrup 1 cup corn syrup Honey 1- 1/4 cups sugar plus 1/4 cup water 3/4 cup maple syrup plus 1/2 cup granulated sugar 3/4 cup corn syrup plus 1/2 cup granulated sugar 3/4 cup light molasses plus 1/2 cup granulated white sugar 1 1/4 cups granulated white or brown sugar plus 1/4 cup additional liquid in recipe plus 1/2 teaspoon cream of tartar Maple Syrup 1 cup honey,thinned with water or fruit juice like apple 3/4 cup corn syrup plus 1/4 cup butter 1 cup Brown Rice Syrup 1 cup Brown sugar (in case of cereals) 1 cup light molasses (on pancakes, cereals etc) 1 cup granulated sugar for every 3/4 cup of maple syrup and increase liquid in the recipe by 3 tbsp for every cup of sugar.If baking soda is used, decrease the amount by 1/4 teaspoon per cup of sugar substituted, since sugar is less acidic than maple syrup Molasses 1 cup honey 1 cup dark corn syrup 1 cup maple syrup 3/4 cup brown sugar warmed and dissolved in 1/4 cup of liquid ( use this if taste of molasses is important in the baked good) Cocoa Powder (Natural, Unsweetened) 3 tablespoons (20 grams) Dutch-processed cocoa plus 1/8 teaspoon cream of tartar, lemon juice or white vinegar 1 ounce (30 grams) unsweetened chocolate (reduce fat in recipe by 1 tablespoon) 3 tablespoons (20 grams) carob powder Semisweet baking chocolate (1 oz) 1 oz unsweetened baking chocolate plus 1 Tbsp sugar Unsweetened baking chocolate (1 oz ) 3 Tbsp baking cocoa plus 1 Tbsp vegetable oil or melted shortening or margarine Semisweet chocolate chips (1 cup) 6 oz semisweet baking chocolate, chopped (Alternatively) For 1 cup of Semi sweet chocolate chips you can use : 6 tablespoons unsweetened cocoa powder, 7 tablespoons sugar ,1/4 cup fat (butter or oil) Leaveners and Diary * * (HV) denotes Healthy Version for low fat or fat free substitution in Baking Compressed Yeast (1 cake) 1 envelope or 2 teaspoons active dry yeast 1 packet (1/4 ounce) Active Dry yeast 1 cake fresh compressed yeast 1 tablespoon fast-rising active yeast Baking Powder (1 tsp) 1/3 teaspoon baking soda plus 1/2 teaspoon cream of tartar 1/2 teaspoon baking soda plus 1/2 cup buttermilk or plain yogurt 1/4 teaspoon baking soda plus 1/3 cup molasses. When using the substitutions that include liquid, reduce other liquid in recipe accordingly Baking Soda(1 tsp) 3 tsp Baking Powder ( and reduce the acidic ingredients in the recipe. Ex Instead of buttermilk add milk) 1 tsp potassium bicarbonate Ideal substitution – 2 tsp Baking powder and omit salt in recipe Cream of tartar (1 tsp) 1 teaspoon white vinegar 1 tsp lemon juice Notes from What’s Cooking America – If cream of tartar is used along with baking soda in a cake or cookie recipe, omit both and use baking powder instead. If it calls for baking soda and cream of tarter, just use baking powder.Normally, when cream of tartar is used in a cookie, it is used together with baking soda. The two of them combined work like double-acting baking powder. When substituting for cream of tartar, you must also substitute for the baking soda. If your recipe calls for baking soda and cream of tarter, just use baking powder. One teaspoon baking powder is equivalent to 1/4 teaspoon baking soda plus 5/8 teaspoon cream of tartar. If there is additional baking soda that does not fit into the equation, simply add it to the batter. Buttermilk (1 cup) 1 tablespoon lemon juice or vinegar (white or cider) plus enough milk to make 1 cup (let stand 5-10 minutes) 1 cup plain or low fat yogurt 1 cup sour cream 1 cup water plus 1/4 cup buttermilk powder 1 cup milk plus 1 1/2 – 1 3/4 teaspoons cream of tartar Plain Yogurt (1 cup) 1 cup sour cream 1 cup buttermilk 1 cup crème fraiche 1 cup heavy whipping cream (35% butterfat) plus 1 tablespoon freshly squeezed lemon juice Whole Milk (1 cup) 1 cup fat free milk plus 1 tbsp unsaturated Oil like canola (HV) 1 cup low fat milk (HV) Heavy Cream (1 cup) 3/4 cup milk plus 1/3 cup melted butter.(whipping wont work) Sour Cream (1 cup) (pls refer also Substitutes for Fats in Baking below) 7/8 cup buttermilk or sour milk plus 3 tablespoons butter. 1 cup thickened yogurt plus 1 teaspoon baking soda. 3/4 cup sour milk plus 1/3 cup butter. 3/4 cup buttermilk plus 1/3 cup butter. Cooked sauces: 1 cup yogurt plus 1 tablespoon flour plus 2 teaspoons water. Cooked sauces: 1 cup evaporated milk plus 1 tablespoon vinegar or lemon juice. Let stand 5 minutes to thicken. Dips: 1 cup yogurt (drain through a cheesecloth-lined sieve for 30 minutes in the refrigerator for a thicker texture). Dips: 1 cup cottage cheese plus 1/4 cup yogurt or buttermilk, briefly whirled in a blender. Dips: 6 ounces cream cheese plus 3 tablespoons milk,briefly whirled in a blender. Lower fat: 1 cup low-fat cottage cheese plus 1 tablespoon lemon juice plus 2 tablespoons skim milk, whipped until smooth in a blender. Lower fat: 1 can chilled evaporated milk whipped with 1 teaspoon lemon juice. 1 cup plain yogurt plus 1 tablespoon cornstarch 1 cup plain nonfat yogurt Substitutes for Fats in Baking * * (HV) denoted Healthy Version for low fat or fat free substitution in Baking Butter (1 cup) 1 cup trans-free vegetable shortening 3/4 cups of vegetable oil (example. Canola oil) Fruit purees (example- applesauce, pureed prunes, baby-food fruits). Add it along with some vegetable oil and reduce any other sweeteners needed in the recipe since fruit purees are already sweet. 1 cup polyunsaturated margarine (HV) 3/4 cup polyunsaturated oil like safflower oil (HV) 1 cup mild olive oil (not extra virgin)(HV) Note: Butter creates the flakiness and the richness which an oil/purees cant provide. If you don’t want to compromise that much to taste, replace half the butter with the substitutions. Shortening(1 cup) 1 cup polyunsaturated margarine like Earth Balance or Smart Balance(HV) 1 cup + 2tbsp Butter ( better tasting than shortening but more expensive and has cholesterol and a higher level of saturated fat; makes cookies less crunchy, bread crusts more crispy) 1 cup + 2 tbsp Margarine (better tasting than shortening but more expensive; makes cookies less crunchy, bread crusts tougher) 1 Cup – 2tbsp Lard (Has cholesterol and a higher level of saturated fat) Oil equal amount of apple sauce stiffly beaten egg whites into batter equal parts mashed banana equal parts yogurt prune puree grated raw zucchini or seeds removed if cooked. Works well in quick breads/muffins/coffee cakes and does not alter taste pumpkin puree (if the recipe can handle the taste change) Low fat cottage cheese (use only half of the required fat in the recipe). Can give rubbery texture to the end result Silken Tofu – (use only half of the required fat in the recipe). Can give rubbery texture to the end result Equal parts of fruit juice Note: Fruit purees can alter the taste of the final product is used in large quantities. Cream Cheese (1 cup) 4 tbsps. margarine plus 1 cup low-fat cottage cheese – blended. Add few teaspoons of fat-free milk if needed (HV) Heavy Cream (1 cup) 1 cup evaporated skim milk (or full fat milk) 1/2 cup low fat Yogurt plus 1/2 low fat Cottage Cheese (HV) 1/2 cup Yogurt plus 1/2 Cottage Cheese Sour Cream (1 cup) 1 cup plain yogurt (HV) 3/4 cup buttermilk or plain yogurt plus 1/3 cup melted butter 1 cup crème fraiche 1 tablespoon lemon juice or vinegar plus enough whole milk to fill 1 cup (let stand 5-10 minutes) 1/2 cup low-fat cottage cheese plus 1/2 cup low-fat or nonfat yogurt (HV) 1 cup fat-free sour cream (HV) Note: How to Make Maple Syrup Substitute at home For 1 Cup Maple Syrup 1/2 cup granulated sugar 1 cup brown sugar, firmly packed 1 cup boiling water 1 teaspoon butter 1 teaspoon maple extract or vanilla extract Method In a heavy saucepan, place the granulated sugar and keep stirring until it melts and turns slightly brown. Alternatively in another pan, place brown sugar and water and bring to a boil without stirring. Now mix both the sugars and simmer in low heat until they come together as one thick syrup. Remove from heat, add butter and the extract. Use this in place of maple syrup. Store it in a fridge in an air tight container. Even though this was posted in their site long back, I found it helpful. So posting it for you. via chefinyou . cc image credit: flickr/zetrules

  Read the article

• Looking Back at MIX10

  - by WeigeltRo

  It’s the sad truth of my life that even though I’m fascinated by airplanes and flight in general since my childhood days, my body doesn’t like flying. Even the ridiculously short flights inside Germany are taking their toll on me each time. Now combine this with sitting in the cramped space of economy class for many hours on a transatlantic flight from Germany to Las Vegas and back, and factor in some heavy dose of jet lag (especially on my way eastwards), and you get an idea why after coming back home I had this question on my mind: Was it really worth it to attend MIX10? This of course is a question that will also be asked by my boss at Comma Soft (for other reasons, obviously), who decided to send me and my colleague Jens Schaller, to the MIX10 conference. (A note to my German readers: An dieser Stelle der Hinweis, dass Comma Soft noch Silverlight-Entwickler und/oder UI-Designer für den Standort Bonn sucht – aussagekräftige Bewerbungen bitte an [email protected]) Too keep things short: My answer is yes. Before I’ll go into detail, let me ask the heretical questions whether tech conferences in general still make sense. There was a time, where actually being at a tech conference gave you a head-start in regard to learning about new technologies. Nowadays this is no longer true, where every bit of information and every detail is immediately twittered, blogged and whatevered to death. In the case of MIX10 you even can download the video-taped sessions shortly after. So: Does visiting a conference still make sense? It depends on what you expect from a conference. It should be clear to everybody that you’ll neither get exclusive information, nor receive training in a small group. What a conference does offer that sitting in front of your computer does not can be summarized as follows: Focus Being away from work and home will help you to focus on the presented information. Of course there are always the poor guys who are haunted by their work (with mails and short text messages reporting the latest showstopper problem), but in general being out of your office makes a huge difference. Inspiration With the focus comes the emotional involvement. I find it much easier to absorb information if I feel that certain vibe when sitting in a session. This still means that I have put work into reviewing the information later, but it’s a better starting point. And all the impressions collected at a (good) conference combined lead to a higher motivation – be it by the buzz (“this is gonna be sooo cool!”) or by the fear to fall behind (“man, we’ll have work on this, or else…”). People At a conference it’s pretty easy to get into contact with other people during breakfast, lunch and other breaks. This is a good opportunity to get a feel for what other development teams are doing (on a very general level of course, nobody will tell you about their secret formula) and what they are thinking about specific technologies. So MIX10 did offer focus, inspiration and people, but that would have meant nothing without valuable content. When I (being a frontend developer with a strong interest in UI/UX) planned my visit to MIX10, I made the decision to focus on the "soft" topics of design, interaction and user experience. I figured that I would be bombarded with all the technical details about Silverlight 4 anyway in the weeks and months to come. Actually, I would have liked to catch a few technical sessions, but the agenda wasn’t exactly in favor of people interested in any kind of Silverlight and UI/UX/Design topics. That’s one of my few complaints about the conference – I would have liked one more day and/or more sessions per day. Overall, the quality of the workshops and sessions was pretty high. In fact, looking back at my collection of conferences I’ve visited in the past I’d say that MIX10 ranks somewhere near the top spot. Here’s an overview of the workshops/sessions I attended (I’ll leave out the keynotes): Day 0 (Workshops on Sunday) Design Fundamentals for Developers Robby Ingebretsen is the man! Great workshop in three parts with the perfect mix of examples, well-structured definition of terminology and the right dose of humor. Robby was part of the WPF team before founding his own company so he not only has a strong interest in design (and the skillz!) but also the technical background.   Design Tools and Techniques Originally announced to be held by Arturo Toledo, the Rosso brothers from ArcheType filled in for the first two parts, and Corrina Black had a pretty general part about the Windows Phone UI. The first two thirds were a mixed bag; the two guys definitely knew what they were talking about, and the demos were great, but the talk lacked the preparation and polish of a truly great presentation. Corrina was not allowed to go into too much detail before the keynote on Monday, but the session was still very interesting as it showed how much thought went into the Windows Phone UI (and there’s always a lot to learn when people talk about their thought process). Day 1 (Monday) Designing Rich Experiences for Data-Centric Applications I wonder whether there was ever a test-run for this session, but what Ken Azuma and Yoshihiro Saito delivered in the first 15 minutes of a 30-minutes-session made me walk out. A commercial for a product (just great: a video showing a SharePoint plug-in in an all-Japanese UI) combined with the most generic blah blah one could imagine. EPIC FAIL.   Great User Experiences: Seamlessly Blending Technology & Design I switched to this session from the one above but I guess I missed the interesting part – what I did catch was what looked like a “look at the cool stuff we did” without being helpful. Or maybe I was just in a bad mood after the other session.   The Art, Technology and Science of Reading This talk by Kevin Larson was very interesting, but was more a presentation of what Microsoft is doing in research (pretty impressive) and in the end lacked a bit the helpful advice one could have hoped for.   10 Ways to Attack a Design Problem and Come Out Winning Robby Ingebretsen again, and again a great mix of theory and practice. The clean and simple, yet effective, UI of the reader app resulted in a simultaneous “wow” of Jens and me. If you’d watch only one session video, this should be it. Microsoft has to bring Robby back next year! Day 2 (Tuesday) Touch in Public: Multi-touch Interaction Design for Kiosks & Architectural Experiences Very interesting session by Jason Brush, a great inspiration with many details to look out for in the examples. Exactly what I was hoping for – and then some!   Designing Bing: Heart and Science How hard can it be to design the UI for a search engine? An input field and a list of results, that should be it, right? Well, not so fast! The talk by Paul Ray showed the many iterations to finally get it right (up to the choice of a specific blue for the links). And yes, I want an eye-tracking device to play around with!   The Elephant in the Room When Nishant Kothary presented a long list of what his session was not about, I told to myself (not having the description text present) “Am I in the wrong talk? Should I leave?”. Boy, was I wrong. A great talk about human factors in the process of designing stuff.   An Hour with Bill Buxton Having seen Bill Buxton’s presentation in the keynote, I just had to see this man again – even though I didn’t know what to expect. Being more or less unplanned and intended to be more of a conversation, the session didn’t provide a wealth of immediately useful information. Nevertheless Bill Buxton was impressive with his huge knowledge of seemingly everything. But this could/should have been a session some when in the evening and not in parallel to at least two other interesting talks. Day 3 (Wednesday) Design the Ordinary, Like the Fixie This session by DL Byron and Kevin Tamura started really well and brought across the message to keep things simple. But towards the end the talk lost some of its steam. And, as a member of the audience pointed out, they kind of ignored their own advice when they used a fancy presentation software other then PowerPoint that sometimes got in the way of showing things.   Developing Natural User Interfaces Speaking of alternative presentation software, Joshua Blake definitely had the most remarkable alternative to PowerPoint, a self-written program called NaturalShow that was controlled using multi-touch on a touch screen. Not a PowerPoint-killer, but impressive nevertheless. The (excellent) talk itself was kind of eye-opening in regard to what “multi-touch support” on various platforms (WPF, Silverlight, Windows Phone) actually means.   Treat your Content Right The talk by Tiffani Jones Brown wasn’t even on my planned schedule, but somehow I ended up in that session – and it was great. And even for people who don’t necessarily have to write content for websites, some points made by Tiffani are valid in many places, notably wherever you put texts with more than a single word into your UI. Creating Effective Info Viz in Microsoft Silverlight The last session of MIX10 I attended was kind of disappointing. At first things were very promising, with Matthias Shapiro giving a brief but well-structured introduction to info graphics and interactive visualizations. Then the live-coding began and while the result was interesting, too much time was spend on wrestling to get the code working. Ending earlier than planned, the talk was a bit light on actual content, but at least it included a nice list of resources. Conclusion It could be felt all across MIX10, UIs will take a huge leap forward; in fact, there are enough examples that have already. People who both have the technical know-how and at least a basic understanding of design (“literacy” as Bill Buxton called it) are in high demand. The concept of the MIX conference and initiatives like design.toolbox shows that Microsoft understands very well that frontend developers have to acquire new knowledge besides knowing how to hack code and putting buttons on a form. There are extremely exciting times before us, with lots of opportunity for those who are eager to develop their skills, that is for sure.

  Read the article

• First toe in the water with Object Databases : DB4O

  - by REA_ANDREW

  I have been wanting to have a play with Object Databases for a while now, and today I have done just that.  One of the obvious choices I had to make was which one to use.  My criteria for choosing one today was simple, I wanted one which I could literally wack in and start using, which means I wanted one which either had a .NET API or was designed/ported to .NET.  My decision was between two being: db4o MongoDb I went for db4o for the single reason that it looked like I could get it running and integrated the quickest.  I am making a Blogging application and front end as a project with which I can test and learn with these object databases.  Another requirement which I thought I would mention is that I also want to be able to use the said database in a shared hosting environment where I cannot install, run and maintain a server instance of said object database.  I can do exactly this with db4o. I have not tried to do this with MongoDb at time of writing.  There are quite a few in the industry now and you read an interesting post about different ones and how they are used with some of the heavy weights in the industry here : http://blog.marcua.net/post/442594842/notes-from-nosql-live-boston-2010 In the example which I am building I am using StructureMap as my IOC.  To inject the object for db4o I went with a Singleton instance scope as I am using a single file and I need this to be available to any thread on in the process as opposed to using the server implementation where I could open and close client connections with the server handling each one respectively.  Again I want to point out that I have chosen to stick with the non server implementation of db4o as I wanted to use this in a shared hosting environment where I cannot have such servers installed and run.     public static class Bootstrapper    {        public static void ConfigureStructureMap()        {            ObjectFactory.Initialize(x => x.AddRegistry(new MyApplicationRegistry()));        }    }    public class MyApplicationRegistry : Registry    {        public const string DB4O_FILENAME = "blog123";        public string DbPath        {            get            {                return Path.Combine(Path.GetDirectoryName(Assembly.GetAssembly(typeof(IBlogRepository)).Location), DB4O_FILENAME);            }        }        public MyApplicationRegistry()        {            For<IObjectContainer>().Singleton().Use(                () => Db4oEmbedded.OpenFile(Db4oEmbedded.NewConfiguration(), DbPath));            Scan(assemblyScanner =>            {                assemblyScanner.TheCallingAssembly();                assemblyScanner.WithDefaultConventions();            });        }    } So my code above is the structure map plumbing which I use for the application.  I am doing this simply as a quick scratch pad to play around with different things so I am simply segregating logical layers with folder structure as opposed to different assemblies.  It will be easy if I want to do this with any segment but for the purposes of example I have literally just wacked everything in the one assembly.  You can see an example file structure I have on the right.  I am planning on testing out a few implementations of the object databases out there so I can program to an interface of IBlogRepository One of the things which I was unsure about was how it performed under a multi threaded environment which it will undoubtedly be used 9 times out of 10, and for the reason that I am using the db context as a singleton, I assumed that the library was of course thread safe but I did not know as I have not read any where in the documentation, again this is probably me not reading things correctly.  In short though I threw together a simple test where I simply iterate to a limit each time kicking a common task off with a thread from a thread pool.  This task simply created and added an random Post and added it to the storage. The execution of the threads I put inside the Setup of the Test and then simply ensure the number of posts committed to the database is equal to the number of iterations I made; here is the code I used to do the multi thread jobs: [TestInitialize] public void Setup() { var sw = new System.Diagnostics.Stopwatch(); sw.Start(); var resetEvent = new ManualResetEvent(false); ThreadPool.SetMaxThreads(20, 20); for (var i = 0; i < MAX_ITERATIONS; i++) { ThreadPool.QueueUserWorkItem(delegate(object state) { var eventToReset = (ManualResetEvent)state; var post = new Post { Author = MockUser, Content = "Mock Content", Title = "Title" }; Repository.Put(post); var counter = Interlocked.Decrement(ref _threadCounter); if (counter == 0) eventToReset.Set(); }, resetEvent); } WaitHandle.WaitAll(new[] { resetEvent }); sw.Stop(); Console.WriteLine("{0:00}.{1:00} seconds", sw.Elapsed.Seconds, sw.Elapsed.Milliseconds); }   I was not doing this to test out the speed performance of db4o but while I was doing this I could not help but put in a StopWatch and see out of sheer interest how fast it would take to insert a number of Posts.  I tested it out in this case with 10000 inserts of a small, simple POCO and it resulted in an average of:  899.36 object inserts / second.  Again this is just  simple crude test which came out of my curiosity at how it performed under many threads when using the non server implementation of db4o. The spec summary of the computer I used is as follows: With regards to the actual Repository implementation itself, it really is quite straight forward and I have to say I am very surprised at how easy it was to integrate and get up and running.  One thing I have noticed in the exposure I have had so far is that the Query returns IList<T> as opposed to IQueryable<T> but again I have not looked into this in depth and this could be there already and if not they have provided everything one needs to make there own repository.  An example of a couple of methods from by db4o implementation of the BlogRepository is below: public class BlogRepository : IBlogRepository { private readonly IObjectContainer _db; public BlogRepository(IObjectContainer db) { _db = db; } public void Put(DomainObject obj) { _db.Store(obj); } public void Delete(DomainObject obj) { _db.Delete(obj); } public Post GetByKey(object key) { return _db.Query<Post>(post => post.Key == key).FirstOrDefault(); } … Anyways I hope to get a few more implementations going of the object databases and literally just get familiarized with them and the concept of no sql databases. Cheers for now, Andrew

  Read the article

• New Bundling and Minification Support (ASP.NET 4.5 Series)

  - by ScottGu

  This is the sixth in a series of blog posts I'm doing on ASP.NET 4.5. The next release of .NET and Visual Studio include a ton of great new features and capabilities.  With ASP.NET 4.5 you'll see a bunch of really nice improvements with both Web Forms and MVC - as well as in the core ASP.NET base foundation that both are built upon. Today’s post covers some of the work we are doing to add built-in support for bundling and minification into ASP.NET - which makes it easy to improve the performance of applications.  This feature can be used by all ASP.NET applications, including both ASP.NET MVC and ASP.NET Web Forms solutions. Basics of Bundling and Minification As more and more people use mobile devices to surf the web, it is becoming increasingly important that the websites and apps we build perform well with them. We’ve all tried loading sites on our smartphones – only to eventually give up in frustration as it loads slowly over a slow cellular network.  If your site/app loads slowly like that, you are likely losing potential customers because of bad performance.  Even with powerful desktop machines, the load time of your site and perceived performance can make an enormous customer perception. Most websites today are made up of multiple JavaScript and CSS files to separate the concerns and keep the code base tight. While this is a good practice from a coding point of view, it often has some unfortunate consequences for the overall performance of the website.  Multiple JavaScript and CSS files require multiple HTTP requests from a browser – which in turn can slow down the performance load time.  Simple Example Below I’ve opened a local website in IE9 and recorded the network traffic using IE’s built-in F12 developer tools. As shown below, the website consists of 5 CSS and 4 JavaScript files which the browser has to download. Each file is currently requested separately by the browser and returned by the server, and the process can take a significant amount of time proportional to the number of files in question. Bundling ASP.NET is adding a feature that makes it easy to “bundle” or “combine” multiple CSS and JavaScript files into fewer HTTP requests. This causes the browser to request a lot fewer files and in turn reduces the time it takes to fetch them.   Below is an updated version of the above sample that takes advantage of this new bundling functionality (making only one request for the JavaScript and one request for the CSS): The browser now has to send fewer requests to the server. The content of the individual files have been bundled/combined into the same response, but the content of the files remains the same - so the overall file size is exactly the same as before the bundling.   But notice how even on a local dev machine (where the network latency between the browser and server is minimal), the act of bundling the CSS and JavaScript files together still manages to reduce the overall page load time by almost 20%.  Over a slow network the performance improvement would be even better. Minification The next release of ASP.NET is also adding a new feature that makes it easy to reduce or “minify” the download size of the content as well.  This is a process that removes whitespace, comments and other unneeded characters from both CSS and JavaScript. The result is smaller files, which will download and load in a browser faster.  The graph below shows the performance gain we are seeing when both bundling and minification are used together: Even on my local dev box (where the network latency is minimal), we now have a 40% performance improvement from where we originally started.  On slow networks (and especially with international customers), the gains would be even more significant. Using Bundling and Minification inside ASP.NET The upcoming release of ASP.NET makes it really easy to take advantage of bundling and minification within projects and see performance gains like in the scenario above. The way it does this allows you to avoid having to run custom tools as part of your build process –  instead ASP.NET has added runtime support to perform the bundling/minification for you dynamically (caching the results to make sure perf is great).  This enables a really clean development experience and makes it super easy to start to take advantage of these new features. Let’s assume that we have a simple project that has 4 JavaScript files and 6 CSS files: Bundling and Minifying the .css files Let’s say you wanted to reference all of the stylesheets in the “Styles” folder above on a page.  Today you’d have to add multiple CSS references to get all of them – which would translate into 6 separate HTTP requests: The new bundling/minification feature now allows you to instead bundle and minify all of the .css files in the Styles folder – simply by sending a URL request to the folder (in this case “styles”) with an appended “/css” path after it.  For example:    This will cause ASP.NET to scan the directory, bundle and minify the .css files within it, and send back a single HTTP response with all of the CSS content to the browser.  You don’t need to run any tools or pre-processor to get this behavior.  This enables you to cleanly separate your CSS into separate logical .css files and maintain a very clean development experience – while not taking a performance hit at runtime for doing so.  The Visual Studio designer will also honor the new bundling/minification logic as well – so you’ll still get a WYSWIYG designer experience inside VS as well. Bundling and Minifying the JavaScript files Like the CSS approach above, if we wanted to bundle and minify all of our JavaScript into a single response we could send a URL request to the folder (in this case “scripts”) with an appended “/js” path after it:   This will cause ASP.NET to scan the directory, bundle and minify the .js files within it, and send back a single HTTP response with all of the JavaScript content to the browser.  Again – no custom tools or builds steps were required in order to get this behavior.  And it works with all browsers. Ordering of Files within a Bundle By default, when files are bundled by ASP.NET they are sorted alphabetically first, just like they are shown in Solution Explorer. Then they are automatically shifted around so that known libraries and their custom extensions such as jQuery, MooTools and Dojo are loaded before anything else. So the default order for the merged bundling of the Scripts folder as shown above will be: Jquery-1.6.2.js Jquery-ui.js Jquery.tools.js a.js By default, CSS files are also sorted alphabetically and then shifted around so that reset.css and normalize.css (if they are there) will go before any other file. So the default sorting of the bundling of the Styles folder as shown above will be: reset.css content.css forms.css globals.css menu.css styles.css The sorting is fully customizable, though, and can easily be changed to accommodate most use cases and any common naming pattern you prefer.  The goal with the out of the box experience, though, is to have smart defaults that you can just use and be successful with. Any number of directories/sub-directories supported In the example above we just had a single “Scripts” and “Styles” folder for our application.  This works for some application types (e.g. single page applications).  Often, though, you’ll want to have multiple CSS/JS bundles within your application – for example: a “common” bundle that has core JS and CSS files that all pages use, and then page specific or section specific files that are not used globally. You can use the bundling/minification support across any number of directories or sub-directories in your project – this makes it easy to structure your code so as to maximize the bunding/minification benefits.  Each directory by default can be accessed as a separate URL addressable bundle.  Bundling/Minification Extensibility ASP.NET’s bundling and minification support is built with extensibility in mind and every part of the process can be extended or replaced. Custom Rules In addition to enabling the out of the box - directory-based - bundling approach, ASP.NET also supports the ability to register custom bundles using a new programmatic API we are exposing.  The below code demonstrates how you can register a “customscript” bundle using code within an application’s Global.asax class.  The API allows you to add/remove/filter files that go into the bundle on a very granular level:     The above custom bundle can then be referenced anywhere within the application using the below <script> reference:     Custom Processing You can also override the default CSS and JavaScript bundles to support your own custom processing of the bundled files (for example: custom minification rules, support for Saas, LESS or Coffeescript syntax, etc). In the example below we are indicating that we want to replace the built-in minification transforms with a custom MyJsTransform and MyCssTransform class. They both subclass the CSS and JavaScript minifier respectively and can add extra functionality:     The end result of this extensibility is that you can plug-into the bundling/minification logic at a deep level and do some pretty cool things with it. 2 Minute Video of Bundling and Minification in Action Mads Kristensen has a great 90 second video that shows off using the new Bundling and Minification feature.  You can watch the 90 second video here. Summary The new bundling and minification support within the next release of ASP.NET will make it easier to build fast web applications.  It is really easy to use, and doesn’t require major changes to your existing dev workflow.  It is also supports a rich extensibility API that enables you to customize it however you want. You can easily take advantage of this new support within ASP.NET MVC, ASP.NET Web Forms and ASP.NET Web Pages based applications. Hope this helps, Scott P.S. In addition to blogging, I use Twitter to-do quick posts and share links. My Twitter handle is: @scottgu

  Read the article

• Contructor parameters for dependent classes with Unity Framework

  - by Onisemus

  I just started using the Unity Application Block to try to decouple my classes and make it easier for unit testing. I ran into a problem though that I'm not sure how to get around. Looked through the documentation and did some Googling but I'm coming up dry. Here's the situation: I have a facade-type class which is a chat bot. It is a singleton class which handles all sort of secondary classes and provides a central place to launch and configure the bot. I also have a class called AccessManager which, well, manages access to bot commands and resources. Boiled down to the essence, I have the classes set up like so. public class Bot { public string Owner { get; private set; } public string WorkingDirectory { get; private set; } private IAccessManager AccessManager; private Bot() { // do some setup // LoadConfig sets the Owner & WorkingDirectory variables LoadConfig(); // init the access mmanager AccessManager = new MyAccessManager(this); } public static Bot Instance() { // singleton code } ... } And the AccessManager class: public class MyAccessManager : IAccessManager { private Bot botReference; public MyAccesManager(Bot botReference) { this.botReference = botReference; SetOwnerAccess(botReference.Owner); } private void LoadConfig() { string configPath = Path.Combine( botReference.WorkingDirectory, "access.config"); // do stuff to read from config file } ... } I would like to change this design to use the Unity Application Block. I'd like to use Unity to generate the Bot singleton and to load the AccessManager interface in some sort of bootstrapping method that runs before anything else does. public static void BootStrapSystem() { IUnityContainer container = new UnityContainer(); // create new bot instance Bot newBot = Bot.Instance(); // register bot instance container.RegisterInstance<Bot>(newBot); // register access manager container.RegisterType<IAccessManager,MyAccessManager>(newBot); } And when I want to get a reference to the Access Manager inside the Bot constructor I can just do: IAcessManager accessManager = container.Resolve<IAccessManager>(); And elsewhere in the system to get a reference to the Bot singleton: // do this Bot botInstance = container.Resolve<Bot>(); // instead of this Bot botInstance = Bot.Instance(); The problem is the method BootStrapSystem() is going to blow up. When I create a bot instance it's going to try to resolve IAccessManager but won't be able to because I haven't registered the types yet (that's the next line). But I can't move the registration in front of the Bot creation because as part of the registration I need to pass the Bot as a parameter! Circular dependencies!! Gah!!! This indicates to me I have a flaw in the way I have this structured. But how do I fix it? Help!!

  Read the article

• NHibernate Conventions

  - by Ricardo Peres

  Introduction It seems that nowadays everyone loves conventions! Not the ones that you go to, but the ones that you use, that is! It just happens that NHibernate also supports conventions, and we’ll see exactly how. Conventions in NHibernate are supported in two ways: Naming of tables and columns when not explicitly indicated in the mappings; Full domain mapping. Naming of Tables and Columns Since always NHibernate has supported the concept of a naming strategy. A naming strategy in NHibernate converts class and property names to table and column names and vice-versa, when a name is not explicitly supplied. In concrete, it must be a realization of the NHibernate.Cfg.INamingStrategy interface, of which NHibernate includes two implementations: DefaultNamingStrategy: the default implementation, where each column and table are mapped to identically named properties and classes, for example, “MyEntity” will translate to “MyEntity”; ImprovedNamingStrategy: underscores (_) are used to separate Pascal-cased fragments, for example, entity “MyEntity” will be mapped to a “my_entity” table. The naming strategy can be defined at configuration level (the Configuration instance) by calling the SetNamingStrategy method: 1: cfg.SetNamingStrategy(ImprovedNamingStrategy.Instance); Both the DefaultNamingStrategy and the ImprovedNamingStrategy classes offer singleton instances in the form of Instance static fields. DefaultNamingStrategy is the one NHibernate uses, if you don’t specify one. Domain Mapping In mapping by code, we have the choice of relying on conventions to do the mapping automatically. This means a class will inspect our classes and decide how they will relate to the database objects. The class that handles conventions is NHibernate.Mapping.ByCode.ConventionModelMapper, a specialization of the base by code mapper, NHibernate.Mapping.ByCode.ModelMapper. The ModelMapper relies on an internal SimpleModelInspector to help it decide what and how to map, but the mapper lets you override its decisions.  You apply code conventions like this: 1: //pick the types that you want to map 2: IEnumerable<Type> types = Assembly.GetExecutingAssembly().GetExportedTypes(); 3:  4: //conventions based mapper 5: ConventionModelMapper mapper = new ConventionModelMapper(); 6:  7: HbmMapping mapping = mapper.CompileMappingFor(types); 8:  9: //the one and only configuration instance 10: Configuration cfg = ...; 11: cfg.AddMapping(mapping); This is a very simple example, it lacks, at least, the id generation strategy, which you can add by adding an event handler like this: 1: mapper.BeforeMapClass += (IModelInspector modelInspector, Type type, IClassAttributesMapper classCustomizer) => 2: { 3: classCustomizer.Id(x => 4: { 5: //set the hilo generator 6: x.Generator(Generators.HighLow); 7: }); 8: }; The mapper will fire events like this whenever it needs to get information about what to do. And basically this is all it takes to automatically map your domain! It will correctly configure many-to-one and one-to-many relations, choosing bags or sets depending on your collections, will get the table and column names from the naming strategy we saw earlier and will apply the usual defaults to all properties, such as laziness and fetch mode. However, there is at least one thing missing: many-to-many relations. The conventional mapper doesn’t know how to find and configure them, which is a pity, but, alas, not difficult to overcome. To start, for my projects, I have this rule: each entity exposes a public property of type ISet<T> where T is, of course, the type of the other endpoint entity. Extensible as it is, NHibernate lets me implement this very easily: 1: mapper.IsOneToMany((MemberInfo member, Boolean isLikely) => 2: { 3: Type sourceType = member.DeclaringType; 4: Type destinationType = member.GetMemberFromDeclaringType().GetPropertyOrFieldType(); 5:  6: //check if the property is of a generic collection type 7: if ((destinationType.IsGenericCollection() == true) && (destinationType.GetGenericArguments().Length == 1)) 8: { 9: Type destinationEntityType = destinationType.GetGenericArguments().Single(); 10:  11: //check if the type of the generic collection property is an entity 12: if (mapper.ModelInspector.IsEntity(destinationEntityType) == true) 13: { 14: //check if there is an equivalent property on the target type that is also a generic collection and points to this entity 15: PropertyInfo collectionInDestinationType = destinationEntityType.GetProperties().Where(x => (x.PropertyType.IsGenericCollection() == true) && (x.PropertyType.GetGenericArguments().Length == 1) && (x.PropertyType.GetGenericArguments().Single() == sourceType)).SingleOrDefault(); 16:  17: if (collectionInDestinationType != null) 18: { 19: return (false); 20: } 21: } 22: } 23:  24: return (true); 25: }); 26:  27: mapper.IsManyToMany((MemberInfo member, Boolean isLikely) => 28: { 29: //a relation is many to many if it isn't one to many 30: Boolean isOneToMany = mapper.ModelInspector.IsOneToMany(member); 31: return (!isOneToMany); 32: }); 33:  34: mapper.BeforeMapManyToMany += (IModelInspector modelInspector, PropertyPath member, IManyToManyMapper collectionRelationManyToManyCustomizer) => 35: { 36: Type destinationEntityType = member.LocalMember.GetPropertyOrFieldType().GetGenericArguments().First(); 37: //set the mapping table column names from each source entity name plus the _Id sufix 38: collectionRelationManyToManyCustomizer.Column(destinationEntityType.Name + "_Id"); 39: }; 40:  41: mapper.BeforeMapSet += (IModelInspector modelInspector, PropertyPath member, ISetPropertiesMapper propertyCustomizer) => 42: { 43: if (modelInspector.IsManyToMany(member.LocalMember) == true) 44: { 45: propertyCustomizer.Key(x => x.Column(member.LocalMember.DeclaringType.Name + "_Id")); 46:  47: Type sourceType = member.LocalMember.DeclaringType; 48: Type destinationType = member.LocalMember.GetPropertyOrFieldType().GetGenericArguments().First(); 49: IEnumerable<String> names = new Type[] { sourceType, destinationType }.Select(x => x.Name).OrderBy(x => x); 50:  51: //set inverse on the relation of the alphabetically first entity name 52: propertyCustomizer.Inverse(sourceType.Name == names.First()); 53: //set mapping table name from the entity names in alphabetical order 54: propertyCustomizer.Table(String.Join("_", names)); 55: } 56: }; We have to understand how the conventions mapper thinks: For each collection of entities found, it will ask the mapper if it is a one-to-many; in our case, if the collection is a generic one that has an entity as its generic parameter, and the generic parameter type has a similar collection, then it is not a one-to-many; Next, the mapper will ask if the collection that it now knows is not a one-to-many is a many-to-many; Before a set is mapped, if it corresponds to a many-to-many, we set its mapping table. Now, this is tricky: because we have no way to maintain state, we sort the names of the two endpoint entities and we combine them with a “_”; for the first alphabetical entity, we set its relation to inverse – remember, on a many-to-many relation, only one endpoint must be marked as inverse; finally, we set the column name as the name of the entity with an “_Id” suffix; Before the many-to-many relation is processed, we set the column name as the name of the other endpoint entity with the “_Id” suffix, as we did for the set. And that’s it. With these rules, NHibernate will now happily find and configure many-to-many relations, as well as all the others. You can wrap this in a new conventions mapper class, so that it is more easily reusable: 1: public class ManyToManyConventionModelMapper : ConventionModelMapper 2: { 3: public ManyToManyConventionModelMapper() 4: { 5: base.IsOneToMany((MemberInfo member, Boolean isLikely) => 6: { 7: return (this.IsOneToMany(member, isLikely)); 8: }); 9:  10: base.IsManyToMany((MemberInfo member, Boolean isLikely) => 11: { 12: return (this.IsManyToMany(member, isLikely)); 13: }); 14:  15: base.BeforeMapManyToMany += this.BeforeMapManyToMany; 16: base.BeforeMapSet += this.BeforeMapSet; 17: } 18:  19: protected virtual Boolean IsManyToMany(MemberInfo member, Boolean isLikely) 20: { 21: //a relation is many to many if it isn't one to many 22: Boolean isOneToMany = this.ModelInspector.IsOneToMany(member); 23: return (!isOneToMany); 24: } 25:  26: protected virtual Boolean IsOneToMany(MemberInfo member, Boolean isLikely) 27: { 28: Type sourceType = member.DeclaringType; 29: Type destinationType = member.GetMemberFromDeclaringType().GetPropertyOrFieldType(); 30:  31: //check if the property is of a generic collection type 32: if ((destinationType.IsGenericCollection() == true) && (destinationType.GetGenericArguments().Length == 1)) 33: { 34: Type destinationEntityType = destinationType.GetGenericArguments().Single(); 35:  36: //check if the type of the generic collection property is an entity 37: if (this.ModelInspector.IsEntity(destinationEntityType) == true) 38: { 39: //check if there is an equivalent property on the target type that is also a generic collection and points to this entity 40: PropertyInfo collectionInDestinationType = destinationEntityType.GetProperties().Where(x => (x.PropertyType.IsGenericCollection() == true) && (x.PropertyType.GetGenericArguments().Length == 1) && (x.PropertyType.GetGenericArguments().Single() == sourceType)).SingleOrDefault(); 41:  42: if (collectionInDestinationType != null) 43: { 44: return (false); 45: } 46: } 47: } 48:  49: return (true); 50: } 51:  52: protected virtual new void BeforeMapManyToMany(IModelInspector modelInspector, PropertyPath member, IManyToManyMapper collectionRelationManyToManyCustomizer) 53: { 54: Type destinationEntityType = member.LocalMember.GetPropertyOrFieldType().GetGenericArguments().First(); 55: //set the mapping table column names from each source entity name plus the _Id sufix 56: collectionRelationManyToManyCustomizer.Column(destinationEntityType.Name + "_Id"); 57: } 58:  59: protected virtual new void BeforeMapSet(IModelInspector modelInspector, PropertyPath member, ISetPropertiesMapper propertyCustomizer) 60: { 61: if (modelInspector.IsManyToMany(member.LocalMember) == true) 62: { 63: propertyCustomizer.Key(x => x.Column(member.LocalMember.DeclaringType.Name + "_Id")); 64:  65: Type sourceType = member.LocalMember.DeclaringType; 66: Type destinationType = member.LocalMember.GetPropertyOrFieldType().GetGenericArguments().First(); 67: IEnumerable<String> names = new Type[] { sourceType, destinationType }.Select(x => x.Name).OrderBy(x => x); 68:  69: //set inverse on the relation of the alphabetically first entity name 70: propertyCustomizer.Inverse(sourceType.Name == names.First()); 71: //set mapping table name from the entity names in alphabetical order 72: propertyCustomizer.Table(String.Join("_", names)); 73: } 74: } 75: } Conclusion Of course, there is much more to mapping than this, I suggest you look at all the events and functions offered by the ModelMapper to see where you can hook for making it behave the way you want. If you need any help, just let me know!

  Read the article

• Problem with initializing a type with WinsdorContainer

  - by the_drow

  public ApplicationView(string[] args) { InitializeComponent(); string configFilePath = Path.Combine(AppDomain.CurrentDomain.BaseDirectory, "log4net.config"); FileInfo configFileInfo = new FileInfo(configFilePath); XmlConfigurator.ConfigureAndWatch(configFileInfo); IConfigurationSource configSource = ConfigurationManager.GetSection("ActiveRecord") as IConfigurationSource; Assembly assembly = Assembly.Load("Danel.Nursing.Model"); ActiveRecordStarter.Initialize(assembly, configSource); WindsorContainer windsorContainer = ApplicationUtils.GetWindsorContainer(); windsorContainer.Kernel.AddComponentInstance<ApplicationView>(this); windsorContainer.Kernel.AddComponent(typeof(ApplicationController).Name, typeof(ApplicationController)); controller = windsorContainer.Resolve<ApplicationController>(); // exception is thrown here OnApplicationLoad(args); } The stack trace is this: Castle.MicroKernel.ComponentActivator.ComponentActivatorException was unhandled Message="ComponentActivator: could not instantiate Danel.Nursing.Scheduling.Actions.DataServices.NurseAbsenceDataService" Source="Castle.MicroKernel" StackTrace: at Castle.MicroKernel.ComponentActivator.DefaultComponentActivator.CreateInstance(CreationContext context, Object[] arguments, Type[] signature) at Castle.MicroKernel.ComponentActivator.DefaultComponentActivator.Instantiate(CreationContext context) at Castle.MicroKernel.ComponentActivator.DefaultComponentActivator.InternalCreate(CreationContext context) at Castle.MicroKernel.ComponentActivator.AbstractComponentActivator.Create(CreationContext context) at Castle.MicroKernel.Lifestyle.AbstractLifestyleManager.Resolve(CreationContext context) at Castle.MicroKernel.Lifestyle.SingletonLifestyleManager.Resolve(CreationContext context) at Castle.MicroKernel.Handlers.DefaultHandler.Resolve(CreationContext context) at Castle.MicroKernel.Resolvers.DefaultDependencyResolver.ResolveServiceDependency(CreationContext context, ComponentModel model, DependencyModel dependency) at Castle.MicroKernel.Resolvers.DefaultDependencyResolver.Resolve(CreationContext context, ISubDependencyResolver parentResolver, ComponentModel model, DependencyModel dependency) at Castle.MicroKernel.ComponentActivator.DefaultComponentActivator.CreateConstructorArguments(ConstructorCandidate constructor, CreationContext context, Type[]& signature) at Castle.MicroKernel.ComponentActivator.DefaultComponentActivator.Instantiate(CreationContext context) at Castle.MicroKernel.ComponentActivator.DefaultComponentActivator.InternalCreate(CreationContext context) at Castle.MicroKernel.ComponentActivator.AbstractComponentActivator.Create(CreationContext context) at Castle.MicroKernel.Lifestyle.AbstractLifestyleManager.Resolve(CreationContext context) at Castle.MicroKernel.Lifestyle.SingletonLifestyleManager.Resolve(CreationContext context) at Castle.MicroKernel.Handlers.DefaultHandler.Resolve(CreationContext context) at Castle.MicroKernel.Resolvers.DefaultDependencyResolver.ResolveServiceDependency(CreationContext context, ComponentModel model, DependencyModel dependency) at Castle.MicroKernel.Resolvers.DefaultDependencyResolver.Resolve(CreationContext context, ISubDependencyResolver parentResolver, ComponentModel model, DependencyModel dependency) at Castle.MicroKernel.ComponentActivator.DefaultComponentActivator.CreateConstructorArguments(ConstructorCandidate constructor, CreationContext context, Type[]& signature) at Castle.MicroKernel.ComponentActivator.DefaultComponentActivator.Instantiate(CreationContext context) at Castle.MicroKernel.ComponentActivator.DefaultComponentActivator.InternalCreate(CreationContext context) at Castle.MicroKernel.ComponentActivator.AbstractComponentActivator.Create(CreationContext context) at Castle.MicroKernel.Lifestyle.AbstractLifestyleManager.Resolve(CreationContext context) at Castle.MicroKernel.Lifestyle.SingletonLifestyleManager.Resolve(CreationContext context) at Castle.MicroKernel.Handlers.DefaultHandler.Resolve(CreationContext context) at Castle.MicroKernel.Resolvers.DefaultDependencyResolver.ResolveServiceDependency(CreationContext context, ComponentModel model, DependencyModel dependency) at Castle.MicroKernel.Resolvers.DefaultDependencyResolver.Resolve(CreationContext context, ISubDependencyResolver parentResolver, ComponentModel model, DependencyModel dependency) at Castle.MicroKernel.ComponentActivator.DefaultComponentActivator.CreateConstructorArguments(ConstructorCandidate constructor, CreationContext context, Type[]& signature) at Castle.MicroKernel.ComponentActivator.DefaultComponentActivator.Instantiate(CreationContext context) at Castle.MicroKernel.ComponentActivator.DefaultComponentActivator.InternalCreate(CreationContext context) at Castle.MicroKernel.ComponentActivator.AbstractComponentActivator.Create(CreationContext context) at Castle.MicroKernel.Lifestyle.AbstractLifestyleManager.Resolve(CreationContext context) at Castle.MicroKernel.Lifestyle.SingletonLifestyleManager.Resolve(CreationContext context) at Castle.MicroKernel.Handlers.DefaultHandler.Resolve(CreationContext context) at Castle.MicroKernel.DefaultKernel.ResolveComponent(IHandler handler, Type service, IDictionary additionalArguments) at Castle.MicroKernel.DefaultKernel.ResolveComponent(IHandler handler, Type service) at Castle.MicroKernel.DefaultKernel.get_Item(Type service) at Castle.Windsor.WindsorContainer.Resolve(Type service) at Castle.Windsor.WindsorContainer.ResolveT at Danel.Nursing.Scheduling.ApplicationView..ctor(String[] args) in E:\Agile\Scheduling\Danel.Nursing.Scheduling\ApplicationView.cs:line 65 at Danel.Nursing.Scheduling.Program.Main(String[] args) in E:\Agile\Scheduling\Danel.Nursing.Scheduling\Program.cs:line 24 at System.AppDomain._nExecuteAssembly(Assembly assembly, String[] args) at System.AppDomain.ExecuteAssembly(String assemblyFile, Evidence assemblySecurity, String[] args) at Microsoft.VisualStudio.HostingProcess.HostProc.RunUsersAssembly() at System.Threading.ThreadHelper.ThreadStart_Context(Object state) at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state) at System.Threading.ThreadHelper.ThreadStart() InnerException: System.ArgumentNullException Message="Value cannot be null.\r\nParameter name: types" Source="mscorlib" ParamName="types" StackTrace: at System.Type.GetConstructor(BindingFlags bindingAttr, Binder binder, Type[] types, ParameterModifier[] modifiers) at Castle.MicroKernel.ComponentActivator.DefaultComponentActivator.FastCreateInstance(Type implType, Object[] arguments, Type[] signature) at Castle.MicroKernel.ComponentActivator.DefaultComponentActivator.CreateInstance(CreationContext context, Object[] arguments, Type[] signature) InnerException: It actually says that the type that I'm trying to initialize does not exist, I think. This is the concreate type that it complains about: namespace Danel.Nursing.Scheduling.Actions.DataServices { using System; using Helpers; using Rhino.Commons; using Danel.Nursing.Model; using NHibernate.Expressions; using System.Collections.Generic; using DateUtil = Danel.Nursing.Scheduling.Actions.Helpers.DateUtil; using Danel.Nursing.Scheduling.Actions.DataServices.Interfaces; public class NurseAbsenceDataService : AbstractDataService<NurseAbsence>, INurseAbsenceDataService { NurseAbsenceDataService(IRepository<NurseAbsence> repository) : base(repository) { } //... } } The AbstractDataService only holds the IRepository for now. Anyone got an idea why the exception is thrown?

  Read the article

• jQuery sequence and function call problem

  - by Jonas

  Hi everyone, I'm very new to jquery and programming in general but I'm still trying to achieve something here. I use Fullcalendar to allow the users of my web application to insert an event in the database. The click on a day, view changes to agendaDay, then on a time of the day, and a dialog popup opens with a form. I am trying to combine validate (pre-jquery.1.4), jquery.form to post the form without page refresh The script calendar.php, included in several pages, defines the fullcalendar object and displays it in a div: $(document).ready(function() { function EventLoad() { $("#addEvent").validate({ rules: { calendar_title: "required", calendar_url: { required: false, maxlength: 100, url: true } }, messages: { calendar_title: "Title required", calendar_url: "Invalid URL format" }, success: function() { $('#addEvent').submit(function() { var options = { success: function() { $('#eventDialog').dialog('close'); $('#calendar').fullCalendar( 'refetchEvents' ); } }; // submit the form $(this).ajaxSubmit(options); // return false to prevent normal browser submit and page navigation return false; }); } }); } $('#calendar').fullCalendar({ header: { left: 'prev,next today', center: 'title', right: 'month,agendaWeek,agendaDay' }, theme: true, firstDay: 1, editable: false, events: "json-events.php?list=1&<?php echo $events_list; ?>", <?php if($_GET['page'] == 'home') echo "defaultView: 'agendaWeek',"; ?> eventClick: function(event) { if (event.url) { window.open(event.url); return false; } }, dayClick: function(date, allDay, jsEvent, view) { if (view.name == 'month') { $('#calendar').fullCalendar( 'changeView', 'agendaDay').fullCalendar( 'gotoDate', date ); }else{ if(allDay) { var timeStamp = $.fullCalendar.formatDate( date, 'dddd+dd+MMMM_u'); var $eventDialog = $('<div/>').load("json-events.php?<?php echo $events_list; ?>&new=1&all_day=1&timestamp=" + timeStamp, null, EventLoad).dialog({autoOpen:false,draggable: false, width: 675, modal:true, position:['center',202], resizable: false, title:'Add an Event'}); $eventDialog.dialog('open').attr('id','eventDialog'); } else { var timeStamp = $.fullCalendar.formatDate( date, 'dddd+dd+MMMM_u'); var $eventDialog = $('<div/>').load("json-events.php?<?php echo $events_list; ?>&new=1&all_day=0&timestamp=" + timeStamp, null, EventLoad).dialog({autoOpen:false,draggable: false, width: 675, modal:true, position:['center',202], resizable: false, title:'Add an Event'}); $eventDialog.dialog('open').attr('id','eventDialog');; } } } }); }); The script json-events.php contains the form and also the code to process the data from the submitted form. What happens when I test the whole thing: - first user click on a day, then time of day. Popup opens with time and date indicated on the form. When user submits the form, dialog closes and calendar refreshes its events.... and the event added by the user appears several times (from 4 to up to 11 times!). The form has been processed several times by the receiving php script?! - second user click, the popup opens, user submit empty form. Form is submitted (validate function not triggered) and user redirected to empty page json-events.php (ajaxForm not triggered either) Obviously, my code is wrong (and dirty as well, sorry). Why is the submitted form, submitted several time to receiving script and why is the javascript function EventLoad triggered only once ? Thank you very much for you help. This problem is killing me !

  Read the article

• 10 Reasons Why Java is the Top Embedded Platform

  - by Roger Brinkley

  With the release of Oracle ME Embedded 3.2 and Oracle Java Embedded Suite, Java is now ready to fully move into the embedded developer space, what many have called the "Internet of Things". Here are 10 reasons why Java is the top embedded platform. 1. Decouples software development from hardware development cycle Development is typically split between both hardware and software in a traditional design flow . This leads to complicated co-design and requires prototype hardware to be built. This parallel and interdependent hardware / software design process typically leads to two or more re-development phases. With Embedded Java, all specific work is carried out in software, with the (processor) hardware implementation fully decoupled. This with eliminate or at least reduces the need for re-spins of software or hardware and the original development efforts can be carried forward directly into product development and validation. 2. Development and testing can be done (mostly) using standard desktop systems through emulation Because the software and hardware are decoupled it now becomes easier to test the software long before it reaches the hardware through hardware emulation. Emulation is the ability of a program in an electronic device to imitate another program or device. In the past Java tools like the Java ME SDK and the SunSPOTs Solarium provided developers with emulation for a complete set of mobile telelphones and SunSpots. This often included network interaction or in the case of SunSPOTs radio communication. What emulation does is speed up the development cycle by refining the software development process without the need of hardware. The software is fixed, redefined, and refactored without the timely expense of hardware testing. With tools like the Java ME 3.2 SDK, Embedded Java applications can be be quickly developed on Windows based platforms. In the end of course developers should do a full set of testing on the hardware as incompatibilities between emulators and hardware will exist, but the amount of time to do this should be significantly reduced. 3. Highly productive language, APIs, runtime, and tools mean quick time to market Charles Nutter probably said it best in twitter blog when he tweeted, "Every time I see a piece of C code I need to port, my heart dies a little. Then I port it to 1/4 as much Java, and feel better." The Java environment is a very complex combination of a Java Virtual Machine, the Java Language, and it's robust APIs. Combine that with the Java ME SDK for small devices or just Netbeans for the larger devices and you have a development environment where development time is reduced significantly meaning the product can be shipped sooner. Of course this is assuming that the engineers don't get slap happy adding new features given the extra time they'll have.  4. Create high-performance, portable, secure, robust, cross-platform applications easily The latest JIT compilers for the Oracle JVM approach the speed of C/C++ code, and in some memory allocation intensive circumstances, exceed it. And specifically for the embedded devices both ME Embedded and SE Embedded have been optimized for the smaller footprints.  In portability Java uses Bytecode to make the language platform independent. This creates a write once run anywhere environment that allows you to develop on one platform and execute on others and avoids a platform vendor lock in. For security, Java achieves protection by confining a Java program to a Java execution environment and not allowing it to access other parts of computer.  In variety of systems the program must execute reliably to be robust. Finally, Oracle Java ME Embedded is a cross-industry and cross-platform product optimized in release version 3.2 for chipsets based on the ARM architectures. Similarly Oracle Java SE Embedded works on a variety of ARM V5, V6, and V7, X86 and Power Architecture Linux. 5. Java isolates your apps from language and platform variations (e.g. C/C++, kernel, libc differences) This has been a key factor in Java from day one. Developers write to Java and don't have to worry about underlying differences in the platform variations. Those platform variations are being managed by the JVM. Gone are the C/C++ problems like memory corruptions, stack overflows, and other such bugs which are extremely difficult to isolate. Of course this doesn't imply that you won't be able to get away from native code completely. There could be some situations where you have to write native code in either assembler or C/C++. But those instances should be limited. 6. Most popular embedded processors supported allowing design flexibility Java SE Embedded is now available on ARM V5, V6, and V7 along with Linux on X86 and Power Architecture platforms. Java ME Embedded is available on system based on ARM architecture SOCs with low memory footprints and a device emulation environment for x86/Windows desktop computers, integrated with the Java ME SDK 3.2. A standard binary of Oracle Java ME Embedded 3.2 for ARM KEIL development boards based on ARM Cortex M-3/4 (KEIL MCBSTM32F200 using ST Micro SOC STM32F207IG) will soon be available for download from the Oracle Technology Network (OTN). 7. Support for key embedded features (low footprint, power mgmt., low latency, etc) All embedded devices by there very nature are constrained in some way. Economics may dictate a device with a less RAM and ROM. The CPU needs can dictate a less powerful device. Power consumption is another major resource in some embedded devices as connecting to consistent power source not always desirable or possible. For others they have to constantly on. Often many of these systems are headless (in the embedded space it's almost always Halloween).  For memory resources ,Java ME Embedded can run in environment as low as 130KB RAM/350KB ROM for a minimal, customized configuration up to 700KB RAM/1500KB ROM for the full, standard configuration. Java SE Embedded is designed for environments starting at 32MB RAM/39MB  ROM. Key functionality of embedded devices such as auto-start and recovery, flexible networking are fully supported. And while Java SE Embedded has been optimized for mid-range to high-end embedded systems, Java ME Embedded is a Java runtime stack optimized for small embedded systems. It provides a robust and flexible application platform with dedicated embedded functionality for always-on, headless (no graphics/UI), and connected devices. 8. Leverage huge Java developer ecosystem (expertise, existing code) There are over 9 million developers in world that work on Java, and while not all of them work on embedded systems, their wealth of expertise in developing applications is immense. In short, getting a java developer to work on a embedded system is pretty easy, you probably have a java developer living in your subdivsion.  Then of course there is the wealth of existing code. The Java Embedded Community on Java.net is central gathering place for embedded Java developers. Conferences like Embedded Java @ JavaOne and the a variety of hardware vendor conferences like Freescale Technlogy Forums offer an excellent opportunity for those interested in embedded systems. 9. Easily create end-to-end solutions integrated with Java back-end services In the "Internet of Things" things aren't on an island doing an single task. For instance and embedded drink dispenser doesn't just dispense a beverage, but could collect money from a credit card and also send information about current sales. Similarly, an embedded house power monitoring system doesn't just manage the power usage in a house, but can also send that data back to the power company. In both cases it isn't about the individual thing, but monitoring a collection of  things. How much power did your block, subdivsion, area of town, town, county, state, nation, world use? How many Dr Peppers were purchased from thing1, thing2, thingN? The point is that all this information can be collected and transferred securely  (and believe me that is key issue that Java fully supports) to back end services for further analysis. And what better back in service exists than a Java back in service. It's interesting to note that on larger embedded platforms that support the Java Embedded Suite some of the analysis might be done on the embedded device itself as JES has a glassfish server and Java Database as part of the installation. The result is an end to end Java solution. 10. Solutions from constrained devices to server-class systems Just take a look at some of the embedded Java systems that have already been developed and you'll see a vast range of solutions. Livescribe pen, Kindle, each and every Blu-Ray player, Cisco's Advanced VOIP phone, KronosInTouch smart time clock, EnergyICT smart metering, EDF's automated meter management, Ricoh Printers, and Stanford's automated car  are just a few of the list of embedded Java implementation that continues to grow. Conclusion Now if your a Java Developer you probably look at some of the 10 reasons and say "duh", but for the embedded developers this is should be an eye opening list. And with the release of ME Embedded 3.2 and the Java Embedded Suite the embedded developers life is now a whole lot easier. For the Java developer your employment opportunities are about to increase. For both it's a great time to start developing Java for the "Internet of Things".

  Read the article

• MySQL Query GROUP_CONCAT Over Multiple Rows

  - by PeteGO

  I'm getting name and address data out of generic question / answer data to create some kind of normalised reporting database. The query I've got uses group_concat and works for individual sets of questions but not for multiple sets. I've tried to simplify what I'm doing by using just forename and surname and just 3 records, 2 for 1 person and 1 for another. In reality though there are more than 300,000 records. Example of results with qs.Id = 1. QuestionSetId Forename Surname ------------------------------------------------------- 1 Bob Jones Example of results with qs.Id IN (1, 2, 3). QuestionSetId Forename Surname ------------------------------------------------------- 3 Bob,Bob,Frank Jones,Jones,Smith What I would like to see for qs.Id IN (1, 2, 3). QuestionSetId Forename Surname ------------------------------------------------------- 1 Bob Jones 2 Bob Jones 3 Frank Smith So how can I make the 2nd example return a separate row for each set of name and address information? I realise the current way the data is stored is "questionable" but I cannot change the way the data is stored. I can get sets of individual answers but not sure how to combine the others. My simplified Schema that I cannot change: CREATE TABLE StaticQuestion ( Id INT NOT NULL, StaticText VARCHAR(500) NOT NULL); CREATE TABLE Question ( Id INT NOT NULL, Text VARCHAR(500) NOT NULL); CREATE TABLE StaticQuestionQuestionLink ( Id INT NOT NULL, StaticQuestionId INT NOT NULL, QuestionId INT NOT NULL, DateEffective DATETIME NOT NULL); CREATE TABLE Answer ( Id INT NOT NULL, Text VARCHAR(500) NOT NULL); CREATE TABLE QuestionSet ( Id INT NOT NULL, DateEffective DATETIME NOT NULL); CREATE TABLE QuestionAnswerLink ( Id INT NOT NULL, QuestionSetId INT NOT NULL, QuestionId INT NOT NULL, AnswerId INT NOT NULL, StaticQuestionId INT NOT NULL); Some example data for only forename and surname. INSERT INTO StaticQuestion (Id, StaticText) VALUES (1, 'FirstName'), (2, 'LastName'); INSERT INTO Question (Id, Text) VALUES (1, 'What is your first name?'), (2, 'What is your forename?'), (3, 'What is your Surname?'); INSERT INTO StaticQuestionQuestionLink (Id, StaticQuestionId, QuestionId, DateEffective) VALUES (1, 1, 1, '2001-01-01'), (2, 1, 2, '2008-08-08'), (3, 2, 3, '2001-01-01'); INSERT INTO Answer (Id, Text) VALUES (1, 'Bob'), (2, 'Jones'), (3, 'Bob'), (4, 'Jones'), (5, 'Frank'), (6, 'Smith'); INSERT INTO QuestionSet (Id, DateEffective) VALUES (1, '2002-03-25'), (2, '2009-05-05'), (3, '2009-08-06'); INSERT INTO QuestionAnswerLink (Id, QuestionSetId, QuestionId, AnswerId, StaticQuestionId) VALUES (1, 1, 1, 1, 1), (2, 1, 3, 2, 2), (3, 2, 2, 3, 1), (4, 2, 3, 4, 2), (5, 3, 2, 5, 1), (6, 3, 3, 6, 2); Just in case SQLFiddle is down here are the 3 queries from the examples I've linked to: 1: - working query but only on 1 set of data. SELECT MAX(QuestionSetId) AS QuestionSetId, GROUP_CONCAT(Forename) AS Forename, GROUP_CONCAT(Surname) AS Surname FROM (SELECT x.QuestionSetId, CASE x.StaticQuestionId WHEN 1 THEN Text END AS Forename, CASE x.StaticQuestionId WHEN 2 THEN Text END AS Surname FROM (SELECT (SELECT link.StaticQuestionId FROM StaticQuestionQuestionLink link WHERE link.Id = qa.QuestionId AND link.DateEffective <= qs.DateEffective AND link.StaticQuestionId IN (1, 2) ORDER BY link.DateEffective DESC LIMIT 1) AS StaticQuestionId, a.Text, qa.QuestionSetId FROM QuestionSet qs INNER JOIN QuestionAnswerLink qa ON qs.Id = qa.QuestionSetId INNER JOIN Answer a ON qa.AnswerId = a.Id WHERE qs.Id IN (1)) x) y 2: - working query but undesired results on multiple sets of data. SELECT MAX(QuestionSetId) AS QuestionSetId, GROUP_CONCAT(Forename) AS Forename, GROUP_CONCAT(Surname) AS Surname FROM (SELECT x.QuestionSetId, CASE x.StaticQuestionId WHEN 1 THEN Text END AS Forename, CASE x.StaticQuestionId WHEN 2 THEN Text END AS Surname FROM (SELECT (SELECT link.StaticQuestionId FROM StaticQuestionQuestionLink link WHERE link.Id = qa.QuestionId AND link.DateEffective <= qs.DateEffective AND link.StaticQuestionId IN (1, 2) ORDER BY link.DateEffective DESC LIMIT 1) AS StaticQuestionId, a.Text, qa.QuestionSetId FROM QuestionSet qs INNER JOIN QuestionAnswerLink qa ON qs.Id = qa.QuestionSetId INNER JOIN Answer a ON qa.AnswerId = a.Id WHERE qs.Id IN (1, 2, 3)) x) y 3: - working query on multiple sets of data only on 1 field (answer) though. SELECT qs.Id AS QuestionSet, a.Text AS Answer FROM QuestionSet qs INNER JOIN QuestionAnswerLink qalink ON qs.Id = qalink.QuestionSetId INNER JOIN StaticQuestionQuestionLink sqqlink ON qalink.QuestionId = sqqlink.QuestionId INNER JOIN Answer a ON qalink.AnswerId = a.Id WHERE sqqlink.StaticQuestionId = 1 /* FirstName */ AND sqqlink.DateEffective = (SELECT DateEffective FROM StaticQuestionQuestionLink WHERE StaticQuestionId = 1 AND DateEffective <= qs.DateEffective ORDER BY DateEffective DESC LIMIT 1)

  Read the article

• CodePlex Daily Summary for Saturday, September 01, 2012

  CodePlex Daily Summary for Saturday, September 01, 2012Popular ReleasesDotNetNuke® Form and List: 06.00.04: DotNetNuke Form and List 06.00.04 Don't forget to backup your installation before upgrade. Changes in 06.00.04 Fix: Sql Scripts for 6.003 missed object qualifiers within stored procedures Fix: added missing resource "cmdCancel.Text" in form.ascx.resx Changes in 06.00.03 Fix: MakeThumbnail was broken if the application pool was configured to .Net 4 Change: Data is now stored in nvarchar(max) instead of ntext Changes in 06.00.02 The scripts are now compatible with SQL Azure, tested in a ne...EntLib.com????????: EntLib.com???????? v3.0: EntLib eCommerce Solution ???Microsoft .Net Framework?????????????????????。Coevery - Free CRM: Coevery 1.0.0.24: Add a sample database, and installation instructions.NicAudio: NicAudio 2.0.6: ac3,dts Solved some initialization issues with no-linear decode.ExpressProfiler: Initial release of ExpressProfiler v1.2: This is initial release of ExpressProfilerMath.NET Numerics: Math.NET Numerics v2.2.1: Major linear algebra rework since v2.1, now available on Codeplex as well (previous versions were only available via NuGet). Since v2.2.0: Student-T density more robust for very large degrees of freedom Sparse Kronecker product much more efficient (now leverages sparsity) Direct access to raw matrix storage implementations for advanced extensibility Now also separate package for signed core library with a strong name (we dropped strong names in v2.2.0) Also available as NuGet packages...Microsoft SQL Server Product Samples: Database: AdventureWorks Databases – 2012, 2008R2 and 2008: About this release This release consolidates AdventureWorks databases for SQL Server 2012, 2008R2 and 2008 versions to one page. Each zip file contains an mdf database file and ldf log file. This should make it easier to find and download AdventureWorks databases since all OLTP versions are on one page. There are no database schema changes. For each release of the product, there is a light-weight and full version of the AdventureWorks sample database. The light-weight version is denoted by ...Christoc's DotNetNuke Module Development Template: DotNetNuke Project Templates V1.1 for VS2012: This release is specifically for Visual Studio 2012 Support, distributed through the Visual Studio Extensions gallery at http://visualstudiogallery.msdn.microsoft.com/ After you build in Release mode the installable packages (source/install) can be found in the INSTALL folder now, within your module's folder, not the packages folder anymore Check out the blog post for all of the details about this release. http://www.dotnetnuke.com/Resources/Blogs/EntryId/3471/New-Visual-Studio-2012-Projec...Home Access Plus+: v8.0: v8.0.0901.1830 RELEASE CHANGED TO BETA Any issues, please log them on http://www.edugeek.net/forums/home-access-plus/ This is full release, NO upgrade ZIP will be provided as most files require replacing. To upgrade from a previous version, delete everything but your AppData folder, extract all but the AppData folder and run your HAP+ install Documentation is supplied in the Web Zip The Quota Services require executing a script to register the service, this can be found in there install ...Phalanger - The PHP Language Compiler for the .NET Framework: 3.0.0.3406 (September 2012): New features: Extended ReflectionClass libxml error handling, constants DateTime::modify(), DateTime::getOffset() TreatWarningsAsErrors MSBuild option OnlyPrecompiledCode configuration option; allows to use only compiled code Fixes: ArgsAware exception fix accessing .NET properties bug fix ASP.NET session handler fix for OutOfProc mode DateTime methods (WordPress posting fix) Phalanger Tools for Visual Studio: Visual Studio 2010 & 2012 New debugger engine, PHP-like debugging ...NougakuDoCompanion: v1.1.0: Add temp folder of local resource, Resize local resource. Change launch ruby commnadline args from rack to bundle. 1.NougakuDoCompanion v1.1.0 cspkg.zip - cspkg and ServiceConfiguration.xml (small , medium, large, extra large vm) - include NougakudoSetupTool.exe and readme.txt 2.NougakuDoCompanion v1.1.0.zip - Source code. include NougakudoSetupTool.exe - include activerecord-sqlserver-adapter patch in paches folder. 3.Depends tools. - Windows Azure SDK for .NET June 2012(1.7SP1) - Windows ...WatchersNET CKEditor™ Provider for DotNetNuke®: CKEditor Provider 1.14.06: Whats New Added CKEditor 3.6.4 oEmbed Plugin can now handle short urls changes The Template File can now parsed from an xml file instead of js (More Info...) Style Sets can now parsed from an xml file instead of js (More Info...) Fixed Showing wrong Pages in Child Portal in the Link Dialog Fixed Urls in dnnpages Plugin Fixed Issue #6969 WordCount Plugin Fixed Issue #6973 File-Browser: Fixed Deleting of Files File-Browser: Improved loading time File-Browser: Improved the loa...MabiCommerce: MabiCommerce 1.0.1: What's NewSetup now creates shortcuts Fix spelling errors Minor enhancement to the Map window.ScintillaNET: ScintillaNET 2.5.2: This release has been built from the 2.5 branch. Version 2.5.2 is functionally identical to the 2.5.1 release but also includes the XML documentation comments file generated by Visual Studio. It is not 100% comprehensive but it will give you Visual Studio IntelliSense for a large part of the API. Just make sure the ScintillaNET.xml file is in the same folder as the ScintillaNET.dll reference you're using in your projects. (The XML file does not need to be distributed with your application)....Facebook Web Parts for SharePoint 2010: Version 1.0.1 - WSP: SharePoint 2010 solution (WSP) Resolved a bug from Version 1.0 - WSP where user profile names would not properly update.CUDAfy.NET: CUDAfy V1.10 BETA: This beta version of CUDAfy V1.10 requires CUDA 5.0 RC when using the Maths libraries. Add: Support for CUDA 5 RC (required if using Maths libraries). Fix: Lock method when multi-threading enabled could dead-lock. Add: Architecture sm_35. Add: Support for context switching. Fix: Translation of PI and E must be done using InvariantCulture. Add: tcc driver property (HighPerformanceDriver). Add: GetDevice always sets the current context to the device context that was got. Add: D...Contactor: GSMContactorProgram V1.0 - Source Code: This is the source code for the program, For Visual Studio 2012 RCTouchInjector: TouchInjector 1.1: Version 1.1: fixed a bug with the autorun optionWinRT XAML Toolkit: WinRT XAML Toolkit - 1.2.0: WinRT XAML Toolkit based on the Windows 8 RTM SDK. Download the latest source from the SOURCE CODE page. For compiled version use NuGet. You can add it to your project in Visual Studio by going to View/Other Windows/Package Manager Console and entering: PM> Install-Package winrtxamltoolkit Features AsyncUI extensions Controls and control extensions Converters Debugging helpers Imaging IO helpers VisualTree helpers Samples Recent changes NOTE: Namespace changes DebugConsol...BlackJumboDog: Ver5.7.1: 2012.08.25 Ver5.7.1 (1)?????·?????LING?????????????? (2)SMTP???（????）????、?????\?????????????????????New Projectsberry: xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxBore Holes: A C program to read data of 11 bore holes which were drilled around a site in Sarawak, Malaysia. The data is displayed graphically as well as on a console.codeSHOW: This is a Windows 8 HTML/JS project with the express goal of showing simple how-to concepts for developing in Windows 8 using JavaScript (codefoster.com)crt-upgrade: ??????C???????????????。????????，????，?????、??、??、?、???、??????。 ???????C????????????，?????C????????????。?????????????????。DnevnikEnvironment?hange: bla bla blaDotNetNuke Translator: This is a Windows Application that can be used locally to translate resources (resx files) for a DotNetNuke installation.Get Connected with twitter & Pull data from user's twitter account: This source code will be useful for ASP.Net MVC C# developers. This contains Get Connected with Twitter & Pull user's information with his permission.GuideCP: ?????????? ??????? ??????????? ?? ??????? ?????? ??????, ?????? ??????, ????????? ? ???? ?? ???????????.Heart of Iron Smart Editor: This is A Heart Of Iron 3 SaveGame editorJSMerge: JSCombine is a command-line utility that is designed to help authors of Javascript libraries combine numerous *.js files into one, comprehensive file.Open Source Compiler, Optimizer and VM for a C-Like Language: Here, you can download an open-source compiler, optimizer and multi-core code generator for a C-like language and modify it in order to meet your requirements.OpenShip .NET - multi-carrier shipping system for Fedex, UPS and USPS: This is a proposed project for a multi-carrier shipping system to create shipments, get rates and track packages for Fedex, UPS and USPS.PogoPlug.NET: Low- and high-level class libraries encapsulating the PogoPlug API.Qi: Qi breathes life into your .NET projects by providing a collection of common helper methods and extensions so that you can get on with building your applicationSalesforce SSIS Transfer: This a project that leverages Salesforce.com's API (both Bulk and standard) to incrementally download a copy of your org's SF.com database.ServiceMon - Extensible Service Monitoring Utility: Standalone service monitoring tool which uses an extensible, scriptable plugin model to define monitoring actions with built-in support for HTTP GET Seven Up Seven Down: Seven Up Seven Down Game by Aditya Gupta Readme - How to play 1. Choose a bet amount 2. Select either 7up or 7down or 7 3. For 7up and 7down if you win yoSharePoint Import Data Timer: Custom timer job for Sharepoint 2010 which imports the results from SQL queries into Sharepoint lists.Smart Rabbit: M-Rabbit is Mihmojsos platform! Whit Smart Rabbit you can boot your Mihmojsos OS without restarting your computer!Sofire Suite: Sofire Suite ?????? 2009 ? 08 ??????????。????????????，???? V ??? Sofire2011（???????????????），???? Sofire.v1.5 ???。To be decided: summary testzwparking: zwparking

  Read the article

• Right-Time Retail Part 3

  - by David Dorf

  This is part three of the three-part series.  Read Part 1 and Part 2 first. Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Right-Time Marketing Real-time isn’t just about executing faster; it extends to interactions with customers as well. As an industry, we’ve spent many years analyzing all the data that’s been collected. Yes, that data has been invaluable in helping us make better decisions like where to open new stores, how to assort those stores, and how to price our products. But the recent advances in technology are now making it possible to analyze and deliver that data very quickly… fast enough to impact a potential sale in near real-time. Let me give you two examples. Salesmen in car dealerships get pretty good at sizing people up. When a potential customer walks in the door, it doesn’t take long for the salesman to figure out the revenue at stake. Is this person a real buyer, or just looking for a fun test drive? Will this person buy today or three months from now? Will this person opt for the expensive packages, or go bare bones? While the salesman certainly asks some leading questions, much of information is discerned through body language. But body language doesn’t translate very well over the web. Eloqua, which was acquired by Oracle earlier this year, reads internet body language. By tracking the behavior of the people visiting your web site, Eloqua categorizes visitors based on their propensity to buy. While Eloqua’s roots have been in B2B, we’ve been looking at leveraging the technology with ATG to target B2C. Knowing what sites were previously visited, how often the customer has been to your site recently, and how long they’ve spent searching can help understand where the customer is in their purchase journey. And knowing that bit of information may be enough to help close the deal with a real-time offer, follow-up email, or online customer service pop-up. This isn’t so different from the days gone by when the clerk behind the counter of the corner store noticed you were lingering in a particular aisle, so he walked over to help you compare two products and close the sale. You appreciated the personalized service, and he knew the value of the long-term relationship. Move that same concept into the digital world and you have Oracle’s CX Suite, a cloud-based offering of end-to-end customer experience tools, assembled primarily from acquisitions. Those tools are Oracle Marketing (Eloqua), Oracle Commerce (ATG, Endeca), Oracle Sales (Oracle CRM On Demand), Oracle Service (RightNow), Oracle Social (Collective Intellect, Vitrue, Involver), and Oracle Content (Fatwire). We are providing the glue that binds the CIO and CMO together to unleash synergies that drive the top-line higher, and by virtue of the cloud-approach, keep costs at bay. My second example of real-time marketing takes place in the store but leverages the concepts of Web marketing. In 1962 the decline of personalized service in retail began. Anyone know the significance of that year? That’s when Target, K-Mart, and Walmart each opened their first stores, and over the succeeding years the industry chose scale over personal service. No longer were you known as “Jane with the snotty kid so make sure we check her out fast,” but you suddenly became “time-starved female age 20-30 with kids.” I’m not saying that was a bad thing – it was the right thing for our industry at the time, and it enabled a huge amount of growth, cheaper prices, and more variety of products. But scale alone is no longer good enough. Today’s sophisticated consumer demands scale, experience, and personal attention. To some extent we’ve delivered that on websites via the magic of cookies, your willingness to log in, and sophisticated data analytics. What store manager wouldn’t love a report detailing all the visitors to his store, where they came from, and which products that examined? People trackers are getting more sophisticated, incorporating infrared, video analytics, and even face recognition. (Next time you walk in front on a mannequin, don’t be surprised if it’s looking back.) But the ultimate marketing conduit is the mobile phone. Since each mobile phone emits a unique number on WiFi networks, it becomes the cookie of the physical world. Assuming congress keeps privacy safeguards reasonable, we’ll have a win-win situation for both retailers and consumers. Retailers get to know more about the consumer’s purchase journey, and consumers get higher levels of service with the retailer. When I call my bank, a couple things happen before the call is connected. A reverse look-up on my phone number identifies me so my accounts can be retrieved from Siebel CRM. Then the system anticipates why I’m calling based on recent transactions. In this example, it sees that I was just charged a foreign currency fee, so it assumes that’s the reason I’m calling. It puts all the relevant information on the customer service rep’s screen as it connects the call. When I complain about the fee, the rep immediately sees I’m a great customer and I travel lots, so she suggests switching me to their traveler’s card that doesn’t have foreign transaction fees. That technology is powered by a product called Oracle Real-Time Decisions, a rules engine built to execute very quickly, basically in the time it takes the phone to ring once. So let’s combine the power of that product with our new-found mobile cookie and provide contextual customer interactions in real-time. Our first opportunity comes when a customer crosses a pre-defined geo-fence, typically a boundary around the store. Context is the key to our interaction: that’s the customer (known or anonymous), the time of day and day of week, and location. Thomas near the downtown store on a Wednesday at noon means he’s heading to lunch. If he were near the mall location on a Saturday morning, that’s a completely different context. But on his way to lunch, we’ll let Thomas know that we’ve got a new shipment of ASICS running shoes on display with a simple text message. We used the context to look-up Thomas’ past purchases and understood he was an avid runner. We used the fact that this was lunchtime to select the type of message, in this case an informational message instead of an offer. Thomas enters the store, phone in hand, and walks to the shoe department. He scans one of the new ASICS shoes using the convenient QR Codes we provided on the shelf-tags, but then he starts scanning low-end Nikes. Each scan is another opportunity to both learn from Thomas and potentially interact via another message. Since he historically buys low-end Nikes and keeps scanning them, he’s likely falling back into his old ways. Our marketing rules are currently set to move loyal customer to higher margin products. We could have set the dials to increase visit frequency, move overstocked items, increase basket size, or many other settings, but today we are trying to move Thomas to higher-margin products. We send Thomas another text message, this time it’s a personalized offer for 10% off ASICS good for 24 hours. Offering him a discount on Nikes would be throwing margin away since he buys those anyway. We are using our marketing dollars to change behavior that increases the long-term value of Thomas. He decides to buy the ASICS and scans the discount code on his phone at checkout. Checkout is yet another opportunity to interact with Thomas, so the transaction is sent back to Oracle RTD for evaluation. Since Thomas didn’t buy anything with the shoes, we’ll print a bounce-back coupon on the receipt offering 30% off ASICS socks if he returns within seven days. We have successfully started moving Thomas from low-margin to high-margin products. In both of these marketing scenarios, we are able to leverage data in near real-time to decide how best to interact with the customer and lead to an increase in the lifetime value of the customer. The key here is acting at the moment the customer shows interest using the context of the situation. We aren’t pushing random products at haphazard times. We are tailoring the marketing to be very specific to this customer, and it’s the technology that allows this to happen in near real-time. Conclusion As we enable more right-time integrations and interactions, retailers will begin to offer increased service to their customers. Localized and personalized service at scale will drive loyalty and lead to meaningful revenue growth for the retailers that execute well. Our industry needs to support Commerce Anywhere…and commerce anytime as well.

  Read the article

• Unable to cast transparent proxy to type &lt;type&gt;

  - by Rick Strahl

  This is not the first time I've run into this wonderful error while creating new AppDomains in .NET and then trying to load types and access them across App Domains. In almost all cases the problem I've run into with this error the problem comes from the two AppDomains involved loading different copies of the same type. Unless the types match exactly and come exactly from the same assembly the typecast will fail. The most common scenario is that the types are loaded from different assemblies - as unlikely as that sounds. An Example of Failure To give some context, I'm working on some old code in Html Help Builder that creates a new AppDomain in order to parse assembly information for documentation purposes. I create a new AppDomain in order to load up an assembly process it and then immediately unload it along with the AppDomain. The AppDomain allows for unloading that otherwise wouldn't be possible as well as isolating my code from the assembly that's being loaded. The process to accomplish this is fairly established and I use it for lots of applications that use add-in like functionality - basically anywhere where code needs to be isolated and have the ability to be unloaded. My pattern for this is: Create a new AppDomain Load a Factory Class into the AppDomain Use the Factory Class to load additional types from the remote domain Here's the relevant code from my TypeParserFactory that creates a domain and then loads a specific type - TypeParser - that is accessed cross-AppDomain in the parent domain:public class TypeParserFactory : System.MarshalByRefObject,IDisposable { …/// <summary> /// TypeParser Factory method that loads the TypeParser /// object into a new AppDomain so it can be unloaded. /// Creates AppDomain and creates type. /// </summary> /// <returns></returns> public TypeParser CreateTypeParser() { if (!CreateAppDomain(null)) return null; /// Create the instance inside of the new AppDomain /// Note: remote domain uses local EXE's AppBasePath!!! TypeParser parser = null; try { Assembly assembly = Assembly.GetExecutingAssembly(); string assemblyPath = Assembly.GetExecutingAssembly().Location; parser = (TypeParser) this.LocalAppDomain.CreateInstanceFrom(assemblyPath, typeof(TypeParser).FullName).Unwrap(); } catch (Exception ex) { this.ErrorMessage = ex.GetBaseException().Message; return null; } return parser; } private bool CreateAppDomain(string lcAppDomain) { if (lcAppDomain == null) lcAppDomain = "wwReflection" + Guid.NewGuid().ToString().GetHashCode().ToString("x"); AppDomainSetup setup = new AppDomainSetup(); // *** Point at current directory setup.ApplicationBase = AppDomain.CurrentDomain.BaseDirectory; //setup.PrivateBinPath = Path.Combine(AppDomain.CurrentDomain.BaseDirectory, "bin"); this.LocalAppDomain = AppDomain.CreateDomain(lcAppDomain,null,setup); // Need a custom resolver so we can load assembly from non current path AppDomain.CurrentDomain.AssemblyResolve += new ResolveEventHandler(CurrentDomain_AssemblyResolve); return true; } …} Note that the classes must be either [Serializable] (by value) or inherit from MarshalByRefObject in order to be accessible remotely. Here I need to call methods on the remote object so all classes are MarshalByRefObject. The specific problem code is the loading up a new type which points at an assembly that visible both in the current domain and the remote domain and then instantiates a type from it. This is the code in question:Assembly assembly = Assembly.GetExecutingAssembly(); string assemblyPath = Assembly.GetExecutingAssembly().Location; parser = (TypeParser) this.LocalAppDomain.CreateInstanceFrom(assemblyPath, typeof(TypeParser).FullName).Unwrap(); The last line of code is what blows up with the Unable to cast transparent proxy to type <type> error. Without the cast the code actually returns a TransparentProxy instance, but the cast is what blows up. In other words I AM in fact getting a TypeParser instance back but it can't be cast to the TypeParser type that is loaded in the current AppDomain. Finding the Problem To see what's going on I tried using the .NET 4.0 dynamic type on the result and lo and behold it worked with dynamic - the value returned is actually a TypeParser instance: Assembly assembly = Assembly.GetExecutingAssembly(); string assemblyPath = Assembly.GetExecutingAssembly().Location; object objparser = this.LocalAppDomain.CreateInstanceFrom(assemblyPath, typeof(TypeParser).FullName).Unwrap(); // dynamic works dynamic dynParser = objparser; string info = dynParser.GetVersionInfo(); // method call works // casting fails parser = (TypeParser)objparser; So clearly a TypeParser type is coming back, but nevertheless it's not the right one. Hmmm… mysterious.Another couple of tries reveal the problem however:// works dynamic dynParser = objparser; string info = dynParser.GetVersionInfo(); // method call works // c:\wwapps\wwhelp\wwReflection20.dll (Current Execution Folder) string info3 = typeof(TypeParser).Assembly.CodeBase; // c:\program files\vfp9\wwReflection20.dll (my COM client EXE's folder) string info4 = dynParser.GetType().Assembly.CodeBase; // fails parser = (TypeParser)objparser; As you can see the second value is coming from a totally different assembly. Note that this is even though I EXPLICITLY SPECIFIED an assembly path to load the assembly from! Instead .NET decided to load the assembly from the original ApplicationBase folder. Ouch! How I actually tracked this down was a little more tedious: I added a method like this to both the factory and the instance types and then compared notes:public string GetVersionInfo() { return ".NET Version: " + Environment.Version.ToString() + "\r\n" + "wwReflection Assembly: " + typeof(TypeParserFactory).Assembly.CodeBase.Replace("file:///", "").Replace("/", "\\") + "\r\n" + "Assembly Cur Dir: " + Directory.GetCurrentDirectory() + "\r\n" + "ApplicationBase: " + AppDomain.CurrentDomain.SetupInformation.ApplicationBase + "\r\n" + "App Domain: " + AppDomain.CurrentDomain.FriendlyName + "\r\n"; } For the factory I got: .NET Version: 4.0.30319.239wwReflection Assembly: c:\wwapps\wwhelp\bin\wwreflection20.dllAssembly Cur Dir: c:\wwapps\wwhelpApplicationBase: C:\Programs\vfp9\App Domain: wwReflection534cfa1f For the instance type I got: .NET Version: 4.0.30319.239wwReflection Assembly: C:\\Programs\\vfp9\wwreflection20.dllAssembly Cur Dir: c:\\wwapps\\wwhelpApplicationBase: C:\\Programs\\vfp9\App Domain: wwDotNetBridge_56006605 which clearly shows the problem. You can see that both are loading from different appDomains but the each is loading the assembly from a different location. Probably a better solution yet (for ANY kind of assembly loading problem) is to use the .NET Fusion Log Viewer to trace assembly loads.The Fusion viewer will show a load trace for each assembly loaded and where it's looking to find it. Here's what the viewer looks like: The last trace above that I found for the second wwReflection20 load (the one that is wonky) looks like this:*** Assembly Binder Log Entry (1/13/2012 @ 3:06:49 AM) *** The operation was successful. Bind result: hr = 0x0. The operation completed successfully. Assembly manager loaded from: C:\Windows\Microsoft.NET\Framework\V4.0.30319\clr.dll Running under executable c:\programs\vfp9\vfp9.exe --- A detailed error log follows. === Pre-bind state information === LOG: User = Ras\ricks LOG: DisplayName = wwReflection20, Version=4.61.0.0, Culture=neutral, PublicKeyToken=null (Fully-specified) LOG: Appbase = file:///C:/Programs/vfp9/ LOG: Initial PrivatePath = NULL LOG: Dynamic Base = NULL LOG: Cache Base = NULL LOG: AppName = vfp9.exe Calling assembly : (Unknown). === LOG: This bind starts in default load context. LOG: Using application configuration file: C:\Programs\vfp9\vfp9.exe.Config LOG: Using host configuration file: LOG: Using machine configuration file from C:\Windows\Microsoft.NET\Framework\V4.0.30319\config\machine.config. LOG: Policy not being applied to reference at this time (private, custom, partial, or location-based assembly bind). LOG: Attempting download of new URL file:///C:/Programs/vfp9/wwReflection20.DLL. LOG: Assembly download was successful. Attempting setup of file: C:\Programs\vfp9\wwReflection20.dll LOG: Entering run-from-source setup phase. LOG: Assembly Name is: wwReflection20, Version=4.61.0.0, Culture=neutral, PublicKeyToken=null LOG: Binding succeeds. Returns assembly from C:\Programs\vfp9\wwReflection20.dll. LOG: Assembly is loaded in default load context. WRN: The same assembly was loaded into multiple contexts of an application domain: WRN: Context: Default | Domain ID: 2 | Assembly Name: wwReflection20, Version=4.61.0.0, Culture=neutral, PublicKeyToken=null WRN: Context: LoadFrom | Domain ID: 2 | Assembly Name: wwReflection20, Version=4.61.0.0, Culture=neutral, PublicKeyToken=null WRN: This might lead to runtime failures. WRN: It is recommended to inspect your application on whether this is intentional or not. WRN: See whitepaper http://go.microsoft.com/fwlink/?LinkId=109270 for more information and common solutions to this issue. Notice that the fusion log clearly shows that the .NET loader makes no attempt to even load the assembly from the path I explicitly specified. Remember your Assembly Locations As mentioned earlier all failures I've seen like this ultimately resulted from different versions of the same type being available in the two AppDomains. At first sight that seems ridiculous - how could the types be different and why would you have multiple assemblies - but there are actually a number of scenarios where it's quite possible to have multiple copies of the same assembly floating around in multiple places. If you're hosting different environments (like hosting the Razor Engine, or ASP.NET Runtime for example) it's common to create a private BIN folder and it's important to make sure that there's no overlap of assemblies. In my case of Html Help Builder the problem started because I'm using COM interop to access the .NET assembly and the above code. COM Interop has very specific requirements on where assemblies can be found and because I was mucking around with the loader code today, I ended up moving assemblies around to a new location for explicit loading. The explicit load works in the main AppDomain, but failed in the remote domain as I showed. The solution here was simple enough: Delete the extraneous assembly which was left around by accident. Not a common problem, but one that when it bites is pretty nasty to figure out because it seems so unlikely that types wouldn't match. I know I've run into this a few times and writing this down hopefully will make me remember in the future rather than poking around again for an hour trying to debug the issue as I did today. Hopefully it'll save some of you some time as well in the future.© Rick Strahl, West Wind Technologies, 2005-2012Posted in .NET  COM   Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

  Read the article

• Team Foundation Server 2012 Build Global List Problems

  - by Bob Hardister

  My experience with the upgrade and use of TFS 2012 has been very positive. I did come across a couple of issues recently that tripped things up for a while. ISSUE 1 The first issue is that 2012 prior to Update 1 published an invalid build list item value to the collection global list. In 2010, the build global list, list item value syntax is an underscore between the build definition and the build number. In the 2012 RTM this underscore was replaced with a backslash, which is invalid.  Specifically, an upload of the global list fails when the backslash is followed at some point by a period. The error when using the API is: <detail ExceptionMessage="TF26204: The account you entered is not recognized. Contact your Team Foundation Server administrator to add your account." BaseExceptionName="Microsoft.TeamFoundation.WorkItemTracking.Server.ValidationException"><details id="600019" http://schemas.microsoft.com/TeamFoundation/2005/06/WorkItemTracking/faultdetail/03"http://schemas.microsoft.com/TeamFoundation/2005/06/WorkItemTracking/faultdetail/03" /></detail> when uploading the global list via the process editor the error is: This issue is corrected in Update1 as the backslash is changed to a forward slash. ISSUE 2 The second issue is that when upgrading from 2010 to 2012, the builds in 2010 are not published to the 2012 global list.  After the upgrade the 2012 global lists doesn’t have any builds and only builds run in 2012 are published to the global list. This was reported to the MSDN forums and Connect. To correct this I wrote a utility to pull all the builds and recreate the builds global list for each project in each collection.  This is a console application with a program.cs, a globallists.cs and a app.config (not published here). The utility connects to TFS 2012, loops through the collections or a target collection as specified in the app.config. Then loops through the projects, the build definitions, and builds.  It creates a global list for each project if that project has at least one build. Then it imports the new list to TFS.  Here’s the code for program and globalists classes. Program.CS using System; using System.Collections.Generic; using System.Linq; using System.Text; using Microsoft.TeamFoundation.Framework.Client; using Microsoft.TeamFoundation.Framework.Common; using Microsoft.TeamFoundation.Client; using Microsoft.TeamFoundation.Server; using System.IO; using System.Xml; using Microsoft.TeamFoundation.WorkItemTracking.Client; using System.Diagnostics; using Utilities; using System.Configuration; namespace TFSProjectUpdater_CLC { class Program { static void Main(string[] args) { DateTime temp_d = System.DateTime.Now; string logName = temp_d.ToShortDateString(); logName = logName.Replace("/", "_"); logName = logName + "_" + temp_d.TimeOfDay; logName = logName.Replace(":", "."); logName = "TFSGlobalListBuildsUpdater_" + logName + ".log"; Trace.Listeners.Add(new TextWriterTraceListener(Path.Combine(ConfigurationManager.AppSettings["logLocation"], logName))); Trace.AutoFlush = true; Trace.WriteLine("Start:" + DateTime.Now.ToString()); Console.WriteLine("Start:" + DateTime.Now.ToString()); string tfsServer = ConfigurationManager.AppSettings["TargetTFS"].ToString(); GlobalLists gl = new GlobalLists(); //replace this with the URL to your TFS instance. Uri tfsUri = new Uri("https://" + tfsServer + "/tfs"); //bool foundLite = false; TfsConfigurationServer config = new TfsConfigurationServer(tfsUri, new UICredentialsProvider()); config.EnsureAuthenticated(); ITeamProjectCollectionService collectionService = config.GetService<ITeamProjectCollectionService>(); IList<TeamProjectCollection> collections = collectionService.GetCollections().OrderBy(collection => collection.Name.ToString()).ToList(); //target Collection string targetCollection = ConfigurationManager.AppSettings["targetCollection"]; foreach (TeamProjectCollection coll in collections) { if (targetCollection.Equals(string.Empty)) { if (!coll.Name.Equals("TFS Archive") && !coll.Name.Equals("DefaultCol") && !coll.Name.Equals("Team Project Template Gallery")) { doWork(coll, tfsServer); } } else { if (coll.Name.Equals(targetCollection)) { doWork(coll, tfsServer); } } } Trace.WriteLine("Finished:" + DateTime.Now.ToString()); Console.WriteLine("Finished:" + DateTime.Now.ToString()); if (System.Diagnostics.Debugger.IsAttached) { Console.WriteLine("\nHit any key to exit..."); Console.ReadKey(); } Trace.Close(); } static void doWork(TeamProjectCollection coll, string tfsServer) { GlobalLists gl = new GlobalLists(); //target Collection string targetProject = ConfigurationManager.AppSettings["targetProject"]; Trace.WriteLine("Collection: " + coll.Name); Uri u = new Uri("https://" + tfsServer + "/tfs/" + coll.Name.ToString()); TfsTeamProjectCollection c = TfsTeamProjectCollectionFactory.GetTeamProjectCollection(u); ICommonStructureService icss = c.GetService<ICommonStructureService>(); try { Trace.WriteLine("\tChecking Collection Global Lists."); gl.RebuildBuildGlobalLists(c); } catch (Exception ex) { Console.WriteLine("Exception! :" + coll.Name); } } } } GlobalLists.CS using System; using System.Collections.Generic; using System.Linq; using System.Text; using Microsoft.TeamFoundation.Client; using Microsoft.TeamFoundation.Framework.Client; using Microsoft.TeamFoundation.Framework.Common; using Microsoft.TeamFoundation.Server; using Microsoft.TeamFoundation.WorkItemTracking.Client; using Microsoft.TeamFoundation.Build.Client; using System.Configuration; using System.Xml; using System.Xml.Linq; using System.Diagnostics; namespace Utilities { public class GlobalLists { string GL_NewList = @"<gl:GLOBALLISTS xmlns:gl=""http://schemas.microsoft.com/VisualStudio/2005/workitemtracking/globallists""> <GLOBALLIST> </GLOBALLIST> </gl:GLOBALLISTS>"; public void RebuildBuildGlobalLists(TfsTeamProjectCollection _tfs) { WorkItemStore wis = new WorkItemStore(_tfs); //export the current globals lists file for the collection to save as a backup XmlDocument globalListsFile = wis.ExportGlobalLists(); globalListsFile.Save(@"c:\temp\" + _tfs.Name.Replace("\\", "_") + "_backupGlobalList.xml"); LogExportCurrentCollectionGlobalListsAsBackup(_tfs); //Build a new global build list from each build definition within each team project IBuildServer buildServer = _tfs.GetService<IBuildServer>(); foreach (Project p in wis.Projects) { XmlDocument newProjectGlobalList = new XmlDocument(); newProjectGlobalList.LoadXml(GL_NewList); LogInstanciateNewProjectBuildGlobalList(_tfs, p); BuildNewProjectBuildGlobalList(_tfs, wis, newProjectGlobalList, buildServer, p); LogEndOfProject(_tfs, p); } } // Private Methods private static void BuildNewProjectBuildGlobalList(TfsTeamProjectCollection _tfs, WorkItemStore wis, XmlDocument newProjectGlobalList, IBuildServer buildServer, Project p) { //locate the template node XmlNamespaceManager nsmgr = new XmlNamespaceManager(newProjectGlobalList.NameTable); nsmgr.AddNamespace("gl", "http://schemas.microsoft.com/VisualStudio/2005/workitemtracking/globallists"); XmlNode node = newProjectGlobalList.SelectSingleNode("//gl:GLOBALLISTS/GLOBALLIST", nsmgr); LogLocatedGlobalListNode(_tfs, p); //add the name attribute for the project build global list XmlElement buildListNode = (XmlElement)node; buildListNode.SetAttribute("name", "Builds - " + p.Name); LogAddedBuildNodeName(_tfs, p); //add new builds to the team project build global list bool buildsExist = false; if (AddNewBuilds(_tfs, newProjectGlobalList, buildServer, p, node, buildsExist)) { //import the new build global list for each project that has builds newProjectGlobalList.Save(@"c:\temp\" + _tfs.Name.Replace("\\", "_") + "_" + p.Name + "_" + "newGlobalList.xml"); //write out temp copy of the global list file to be imported LogImportReady(_tfs, p); wis.ImportGlobalLists(newProjectGlobalList.InnerXml); LogImportComplete(_tfs, p); } } private static bool AddNewBuilds(TfsTeamProjectCollection _tfs, XmlDocument newProjectGlobalList, IBuildServer buildServer, Project p, XmlNode node, bool buildsExist) { var buildDefinitions = buildServer.QueryBuildDefinitions(p.Name); foreach (var buildDefinition in buildDefinitions) { var builds = buildDefinition.QueryBuilds(); foreach (var build in builds) { //insert the builds into the current build list node in the correct 2012 format buildsExist = true; XmlElement listItem = newProjectGlobalList.CreateElement("LISTITEM"); listItem.SetAttribute("value", buildDefinition.Name + "/" + build.BuildNumber.ToString().Replace(buildDefinition.Name + "_", "")); node.AppendChild(listItem); } } if (buildsExist) LogBuildListCreated(_tfs, p); else LogNoBuildsInProject(_tfs, p); return buildsExist; } // Logging Methods private static void LogExportCurrentCollectionGlobalListsAsBackup(TfsTeamProjectCollection _tfs) { Trace.WriteLine("\tExported Global List for " + _tfs.Name + " collection."); Console.WriteLine("\tExported Global List for " + _tfs.Name + " collection."); } private void LogInstanciateNewProjectBuildGlobalList(TfsTeamProjectCollection _tfs, Project p) { Trace.WriteLine("\t\tInstanciated the new build global list for project " + p.Name + " in the " + _tfs.Name + " collection."); Console.WriteLine("\t\tInstanciated the new build global list for project \n\t\t\t" + p.Name + " in the \n\t\t\t" + _tfs.Name + " collection."); } private static void LogLocatedGlobalListNode(TfsTeamProjectCollection _tfs, Project p) { Trace.WriteLine("\t\tLocated the build global list node for project " + p.Name + " in the " + _tfs.Name + " collection."); Console.WriteLine("\t\tLocated the build global list node for project \n\t\t\t" + p.Name + " in the \n\t\t\t" + _tfs.Name + " collection."); } private static void LogAddedBuildNodeName(TfsTeamProjectCollection _tfs, Project p) { Trace.WriteLine("\t\tAdded the name attribute to the build global list for project " + p.Name + " in the " + _tfs.Name + " collection."); Console.WriteLine("\t\tAdded the name attribute to the build global list for project \n\t\t\t" + p.Name + " in the \n\t\t\t" + _tfs.Name + " collection."); } private static void LogBuildListCreated(TfsTeamProjectCollection _tfs, Project p) { Trace.WriteLine("\t\tAdded all builds into the " + "Builds - " + p.Name + " list in the " + _tfs.Name + " collection."); Console.WriteLine("\t\tAdded all builds into the " + "Builds - \n\t\t\t" + p.Name + " list in the \n\t\t\t" + _tfs.Name + " collection."); } private static void LogNoBuildsInProject(TfsTeamProjectCollection _tfs, Project p) { Trace.WriteLine("\t\tNo builds found for project " + p.Name + " in the " + _tfs.Name + " collection."); Console.WriteLine("\t\tNo builds found for project " + p.Name + " \n\t\t\tin the " + _tfs.Name + " collection."); } private void LogEndOfProject(TfsTeamProjectCollection _tfs, Project p) { Trace.WriteLine("\t\tEND OF PROJECT " + p.Name); Trace.WriteLine(" "); Console.WriteLine("\t\tEND OF PROJECT " + p.Name); Console.WriteLine(); } private static void LogImportReady(TfsTeamProjectCollection _tfs, Project p) { Trace.WriteLine("\t\tReady to import the build global list for project " + p.Name + " to the " + _tfs.Name + " collection."); Console.WriteLine("\t\tReady to import the build global list for project \n\t\t\t" + p.Name + " to the \n\t\t\t" + _tfs.Name + " collection."); } private static void LogImportComplete(TfsTeamProjectCollection _tfs, Project p) { Trace.WriteLine("\t\tImport of the build global list for project " + p.Name + " to the " + _tfs.Name + " collection completed."); Console.WriteLine("\t\tImport of the build global list for project \n\t\t\t" + p.Name + " to the \n\t\t\t" + _tfs.Name + " collection completed."); } } }

  Read the article

• CodePlex Daily Summary for Tuesday, June 18, 2013

  CodePlex Daily Summary for Tuesday, June 18, 2013Popular ReleasesCODE Framework: 4.0.30618.0: See change notes in the documentation section for details on what's new. Note: If you download the class reference help file with, you have to right-click the file, pick "Properties", and then unblock the file, as many browsers flag the file as blocked during download (for security reasons) and thus hides all content.Toolbox for Dynamics CRM 2011: XrmToolBox (v1.2013.6.18): XrmToolbox improvement Use new connection controls (use of Microsoft.Xrm.Client.dll) New display capabilities for tools (size, image and colors) Added prerequisites check Added Most Used Tools feature Tools improvementNew toolSolution Transfer Tool (v1.0.0.0) developed by DamSim Updated toolView Layout Replicator (v1.2013.6.17) Double click on source view to display its layoutXml All tools list Access Checker (v1.2013.6.17) Attribute Bulk Updater (v1.2013.6.18) FetchXml Tester (v1.2013.6.1...Media Companion: Media Companion MC3.570b: New* Movie - using XBMC TMDB - now renames movies if option selected. * Movie - using Xbmc Tmdb - Actor images saved from TMDb if option selected. Fixed* Movie - Checks for poster.jpg against missing poster filter * Movie - Fixed continual scraping of vob movie file (not DVD structure) * Both - Correctly display audio channels * Both - Correctly populate audio info in nfo's if multiple audio tracks. * Both - added icons and checked for DTS ES and Dolby TrueHD audio tracks. * Both - Stream d...LINQ Extensions Library: 1.0.4.2: New to release 1.0.4.2 Custom sorting extensions that perform up to 50% better than LINQ OrderBy, ThenBy extensions... Extensions allow for fine tuning of the sort by controlling the algorithm each sort uses.ExtJS based ASP.NET Controls: FineUI v3.3.0: ??FineUI ?? ExtJS ??? ASP.NET ???。 FineUI??? ?? No JavaScript，No CSS，No UpdatePanel，No ViewState，No WebServices ???????。 ?????? IE 7.0、Firefox 3.6、Chrome 3.0、Opera 10.5、Safari 3.0+ ???? Apache License v2.0 ?：ExtJS ?? GPL v3 ?????(http://www.sencha.com/license)。 ???? ??：http://fineui.com/bbs/ ??：http://fineui.com/demo/ ??：http://fineui.com/doc/ ??：http://fineui.codeplex.com/ FineUI???? ExtJS ?????????，???? ExtJS ?。 ????? FineUI ? ExtJS ?：http://fineui.com/bbs/forum.php?mod=viewthrea...BarbaTunnel: BarbaTunnel 8.0: Check Version History for more information about this release.ExpressProfiler: ExpressProfiler v1.5: [+] added Start time, End time event columns [+] added SP:StmtStarting, SP:StmtCompleted events [*] fixed bug with Audit:Logout eventpatterns & practices: Data Access Guidance: Data Access Guidance Drop4 2013.06.17: Drop 4Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.94: add dstLine and dstCol attributes to the -Analyze output in XML mode. un-combine leftover comma-separates expression statements after optimizations are complete so downstream tools don't stack-overflow on really deep comma trees. add support for using a single source map generator instance with multiple runs of MinifyJavaScript, assuming that the results are concatenated to the same output file.Kooboo CMS: Kooboo CMS 4.1.1: The stable release of Kooboo CMS 4.1.0 with fixed the following issues: https://github.com/Kooboo/CMS/issues/1 https://github.com/Kooboo/CMS/issues/11 https://github.com/Kooboo/CMS/issues/13 https://github.com/Kooboo/CMS/issues/15 https://github.com/Kooboo/CMS/issues/19 https://github.com/Kooboo/CMS/issues/20 https://github.com/Kooboo/CMS/issues/24 https://github.com/Kooboo/CMS/issues/43 https://github.com/Kooboo/CMS/issues/45 https://github.com/Kooboo/CMS/issues/46 https://github....VidCoder: 1.5.0 Beta: The betas have started up again! If you were previously on the beta track you will need to install this to get back on it. That's because you can now run both the Beta and Stable version of VidCoder side-by-side! Note that the OpenCL and Intel QuickSync changes being tested by HandBrake are not in the betas yet. They will appear when HandBrake integrates them into the main branch. Updated HandBrake core to SVN 5590. This adds a new FDK AAC encoder. The FAAC encoder has been removed and now...Employee Info Starter Kit: v6.0 - ASP.NET MVC Edition: Release Home - Getting Started - Hands on Coding Walkthrough – Technology Stack - Design & Architecture EISK v6.0 – ASP.NET MVC edition bundles most of the greatest and successful platforms, frameworks and technologies together, to enable web developers to learn and build manageable and high performance web applications with rich user experience effectively and quickly. User End SpecificationsCreating a new employee record Read existing employee records Update an existing employee reco...OLAP PivotTable Extensions: Release 0.8.1: Use the 32-bit download for... Excel 2007 Excel 2010 32-bit (even Excel 2010 32-bit on a 64-bit operating system) Excel 2013 32-bit (even Excel 2013 32-bit on a 64-bit operating system) Use the 64-bit download for... Excel 2010 64-bit Excel 2013 64-bit Just download and run the EXE. There is no need to uninstall the previous release. If you have problems getting the add-in to work, see the Troubleshooting Installation wiki page. The new features in this release are: View #VALUE! Err...DirectXTex texture processing library: June 2013: June 15, 2013 Custom filtering implementation for Resize & GenerateMipMaps(3D) - Point, Box, Linear, Cubic, and Triangle TEX_FILTER_TRIANGLE finite low-pass triangle filter TEX_FILTER_WRAP, TEX_FILTER_MIRROR texture semantics for custom filtering TEX_FILTER_BOX alias for TEX_FILTER_FANT WIC Ordered and error diffusion dithering for non-WIC conversion sRGB gamma correct custom filtering and conversion DDS_FLAGS_EXPAND_LUMINANCE - Reader conversion option for L8, L16, and A8L8 legacy ...WPF Application Framework (WAF): WPF Application Framework (WAF) 3.0.0.440: Version: 3.0.0.440 (Release Candidate): This release contains the source code of the WPF Application Framework (WAF) and the sample applications. Please build the whole solution before you start one of the sample applications. Requirements .NET Framework 4.5 (The package contains a solution file for Visual Studio 2012) Changelog Legend: [B] Breaking change; [O] Marked member as obsolete Samples: Use ValueConverters via StaticResource instead of x:Static. Other Downloads Downloads OverviewBlackJumboDog: Ver5.9.1: 2013.06.13 Ver5.9.1 (1) Web??????SSI?#include???、CGI?????????????????????? (2) ???????????????????????????Lakana - WPF Framework: Lakana V2.1 RTM: - Dynamic text localization - A new application wide message busFree language translator and file converter: Free Language Translator 3.3: some bug fixes and a new link to video tutorials on Youtube.Pokemon Battle Online: ETV: ETV???2012?12??????，????，???????$/PBO/branches/PrivateBeta??。 ???????bug???????。 ???? Server??????，?????。 ?????????，?????????????，?????????。 ????????，????，?????????，???????????（??）??。 ???? ????????????。 ???????。 ???PP????，????????????????????PP????，??3。 ?????????????，??????????。 ???????? ??? ?? ???? ??? ???? ?? ?????????? ?? ??? ??? ??? ???????? ???? ???? ???????????????、???????????，??“???????”??。 ???bug ???Modern UI for WPF: Modern UI 1.0.4: The ModernUI assembly including a demo app demonstrating the various features of Modern UI for WPF. Related downloads NuGet ModernUI for WPF is also available as NuGet package in the NuGet gallery, id: ModernUI.WPF Download Modern UI for WPF Templates A Visual Studio 2012 extension containing a collection of project and item templates for Modern UI for WPF. The extension includes the ModernUI.WPF NuGet package. DownloadNew ProjectsAux Browser: This browser is secured by system level sandbox technology, and it helps you get where you want to go in the shortest possible time. Best solution to convert Outlook OST to PST files: Convert OST to PST without fearing for data loss. An immaculate converter by Recover Data gives user a privilege to perform OST file recovery with no data loss.Bitbucket.NET: A high-performance .NET library for developing applications that use the Bitbucket service.caosu: aaaChartApp: Chart App for SharePoint 2013Custom Membership Provider SQL + LDAP with one login page: Custom membership provider to allow users to login to there portal from one login page whether its custom SQLDB or the current Active Directory.DroidBrowse: Web browser for Android 1.6 or later.haseebtestProject: This project is created to add random files and for testing purposesHiveSense: Hive monitoring system.JQuery File Upload Plugin with Backload server side component (Demo/Examples): Backload is a professional, full featured ASP.NET MVC 4 file upload controller and handler (server side). JSLocator: Locate javascript functions in the sourceMoonCMS: This is a trivial thing. It doesn't make any sense!MyLabs: MyLabs is Private Labpcvvpes: pcvvpesPrism Model Factory Extensions: Micro framework for model cloning, equality check and mergingSharePoint 2007 Solution and Packaging Guidance: WSPSolution is a standard for building SP 2007 solutions in Visual Studio, namespace planning, deployment planning, WSP creation, and build automation.Windows Phone Wi-Fi Launcher: Wi-Fi settings page launcher for Windows Phone 8.0

  Read the article

• Do you play Sudoku ?

  - by Gilles Haro

  Did you know that 11gR2 database could solve a Sudoku puzzle with a single query and, most of the time, and this in less than a second ? The following query shows you how ! Simply pass a flattened Sudoku grid to it a get the result instantaneously ! col "Solution" format a9 col "Problem" format a9 with Iteration( initialSudoku, Step, EmptyPosition ) as ( select initialSudoku, InitialSudoku, instr( InitialSudoku, '-' )        from ( select '--64----2--7-35--1--58-----27---3--4---------4--2---96-----27--7--58-6--3----18--' InitialSudoku from dual )    union all    select initialSudoku        , substr( Step, 1, EmptyPosition - 1 ) || OneDigit || substr( Step, EmptyPosition + 1 )         , instr( Step, '-', EmptyPosition + 1 )      from Iteration         , ( select to_char( rownum ) OneDigit from dual connect by rownum <= 9 ) OneDigit     where EmptyPosition > 0       and not exists          ( select null              from ( select rownum IsPossible from dual connect by rownum <= 9 )             where OneDigit = substr( Step, trunc( ( EmptyPosition - 1 ) / 9 ) * 9 + IsPossible, 1 )   -- One line must contain the 1-9 digits                or OneDigit = substr( Step, mod( EmptyPosition - 1, 9 ) - 8 + IsPossible * 9, 1 )      -- One row must contain the 1-9 digits                or OneDigit = substr( Step, mod( trunc( ( EmptyPosition - 1 ) / 3 ), 3 ) * 3           -- One square must contain the 1-9 digits                            + trunc( ( EmptyPosition - 1 ) / 27 ) * 27 + IsPossible                            + trunc( ( IsPossible - 1 ) / 3 ) * 6 , 1 )          ) ) select initialSudoku "Problem", Step "Solution"    from Iteration  where EmptyPosition = 0 ;   The Magic thing behind this is called Recursive Subquery Factoring. The Oracle documentation gives the following definition: If a subquery_factoring_clause refers to its own query_name in the subquery that defines it, then the subquery_factoring_clause is said to be recursive. A recursive subquery_factoring_clause must contain two query blocks: the first is the anchor member and the second is the recursive member. The anchor member must appear before the recursive member, and it cannot reference query_name. The anchor member can be composed of one or more query blocks combined by the set operators: UNION ALL, UNION, INTERSECT or MINUS. The recursive member must follow the anchor member and must reference query_name exactly once. You must combine the recursive member with the anchor member using the UNION ALL set operator. This new feature is a replacement of this old Hierarchical Query feature that exists in Oracle since the days of Aladdin (well, at least, release 2 of the database in 1977). Everyone remembers the old syntax : select empno, ename, job, mgr, level      from   emp      start with mgr is null      connect by prior empno = mgr; that could/should be rewritten (but not as often as it should) as withT_Emp (empno, name, level) as        ( select empno, ename, job, mgr, level             from   emp             start with mgr is null             connect by prior empno = mgr        ) select * from   T_Emp; which uses the "with" syntax, whose main advantage is to clarify the readability of the query. Although very efficient, this syntax had the disadvantage of being a Non-Ansi Sql Syntax. Ansi-Sql version of Hierarchical Query is called Recursive Subquery Factoring. As of 11gR2, Oracle got compliant with Ansi Sql and introduced Recursive Subquery Factoring. It is basically an extension of the "With" clause that enables recursion. Now, the new syntax for the query would be with T_Emp (empno, name, job, mgr, hierlevel) as       ( select E.empno, E.ename, E.job, E.mgr, 1 from emp E where E.mgr is null         union all         select E.empno, E.ename, E.job, E.mgr, T.hierlevel + 1from emp E                                                                                                            join T_Emp T on ( E.mgr = T.empno ) ) select * from   T_Emp; The anchor member is a replacement for the "start with" The recursive member is processed through iterations. It joins the Source table (EMP) with the result from the Recursive Query itself (T_Emp) Each iteration works with the results of all its preceding iterations.     Iteration 1 works on the results of the first query     Iteration 2 works on the results of Iteration 1 and first query     Iteration 3 works on the results of Iteration 1, Iteration 2 and first query. So, knowing that, the Sudoku query it self-explaining; The anchor member contains the "Problem" : The Initial Sudoku and the Position of the first "hole" in the grid. The recursive member tries to replace the considered hole with any of the 9 digit that would satisfy the 3 rules of sudoku Recursion progress through the grid until it is complete.   Another example :  Fibonaccy Numbers :  un = (un-1) + (un-2) with Fib (u1, u2, depth) as   (select 1, 1, 1 from dual    union all    select u1+u2, u1, depth+1 from Fib where depth<10) select u1 from Fib; Conclusion Oracle brings here a new feature (which, to be honest, already existed on other concurrent systems) and extends the power of the database to new boundaries. It’s now up to developers to try and test it and find more useful application than solving puzzles… But still, solving a Sudoku in less time it takes to say it remains impressive… Interesting links: You might be interested by the following links which cover different aspects of this feature Oracle Documentation Lucas Jellema 's Blog Fibonaci Numbers

  Read the article

• New release of Microsoft All-In-One Code Framework is available for download - March 2011

  - by Jialiang

  A new release of Microsoft All-In-One Code Framework is available on March 8th. Download address: http://1code.codeplex.com/releases/view/62267#DownloadId=215627 You can download individual code samples or browse code samples grouped by technology in the updated code sample index. If it’s the first time that you hear about Microsoft All-In-One Code Framework, please read this Microsoft News Center article http://www.microsoft.com/presspass/features/2011/jan11/01-13codeframework.mspx, or watch the introduction video on YouTube http://www.youtube.com/watch?v=cO5Li3APU58, or read the introduction on our homepage http://1code.codeplex.com/. -------------- New Silverlight code samples CSSLTreeViewCRUDDragDrop Download: http://1code.codeplex.com/releases/view/62253#DownloadId=215808 The code sample was created by Amit Dey. It demonstrates a custom TreeView with added functionalities of CRUD (Create, Read, Update, Delete) and drag-and-drop operations. Silverlight TreeView control with CRUD and drag & drop is a frequently asked programming question in Silverlight  forums. Many customers also requested this code sample in our code sample request service. We hope that this sample can reduce developers' efforts in handling this typical programming scenario. The following blog article introduces the sample in detail: http://blogs.msdn.com/b/codefx/archive/2011/02/15/silverlight-treeview-control-with-crud-and-drag-amp-drop.aspx. CSSL4FileDragDrop and VBSL4FileDragDrop Download: http://1code.codeplex.com/releases/view/62253#DownloadId=215809 http://1code.codeplex.com/releases/view/62253#DownloadId=215810 The code sample demonstrates the new drag&drop feature of Silverlight 4 to implement dragging picures from the local file system to a Silverlight application.   Sometimes we want to change SiteMapPath control's titles and paths according to Query String values. And sometimes we want to create the SiteMapPath dynamically. This code sample shows how to achieve these goals by handling SiteMap.SiteMapResolve event. CSASPNETEncryptAndDecryptConfiguration, VBASPNETEncryptAndDecryptConfiguration Download: http://1code.codeplex.com/releases/view/62253#DownloadId=215027 http://1code.codeplex.com/releases/view/62253#DownloadId=215106 In this sample, we encrypt and decrypt some sensitive information in the config file of a web application by using the RSA asymmetric encryption. This project contains two snippets. The first one demonstrates how to use RSACryptoServiceProvider to generate public key and the corresponding private key and then encrypt/decrypt string value on page. The second part shows how to use RSA configuration provider to encrypt and decrypt configuration section in web.config of web application. connectionStrings section in plain text: Encrypted connectionString:  Note that if you store sensitive data in any of the following configuration sections, we cannot encrypt it by using a protected configuration provider <processModel> <runtime> <mscorlib> <startup> <system.runtime.remoting> <configProtectedData> <satelliteassemblies> <cryptographySettings> <cryptoNameMapping> CSASPNETFileUploadStatus Download: http://1code.codeplex.com/releases/view/62253#DownloadId=215028 I believe ASP.NET programmers will like this sample, because in many cases we need customers know the current status of the uploading files, including the upload speed and completion percentage and so on. Under normal circumstances, we need to use COM components to accomplish this function, such as Flash, Silverlight, etc. The uploading data can be retrieved in two places, the client-side and the server-side. For the client, for the safety factors, the file upload status information cannot be got from JavaScript or server-side code, so we need COM component, like Flash and Silverlight to accomplish this, I do not like this approach because the customer need to install these components, but also we need to learn another programming framework. For the server side, we can get the information through coding, but the key question is how to tell the client results. In this case, We will combine custom HTTPModule and AJAX technology to illustrate how to analyze the HTTP protocol, how to break the file request packets, how to customize the location of the server-side file caching, how to return the file uploading status back to the client and so on . CSASPNETHighlightCodeInPage, VBASPNETHighlightCodeInPage Download: http://1code.codeplex.com/releases/view/62253#DownloadId=215029 http://1code.codeplex.com/releases/view/62253#DownloadId=215108 This sample imitates a system that needs display the highlighted code in an ASP.NET page . As a matter of fact, sometimes we input code like C# or HTML in a web page and we need these codes to be highlighted for a better reading experience. It is convenient for us to keep the code in mind if it is highlighted. So in this case, the sample shows how to highlight the code in an ASP.NET page. It is not difficult to highlight the code in a web page by using String.Replace method directly. This  method can return a new string in which all occurrences of a specified string in the current instance are replaced with another specified string. However, it may not be a good idea, because it's not extremely fast, in fact, it's pretty slow. In addition, it is hard to highlight multiple keywords by using String.Replace method directly. Sometimes we need to copy source code from visual studio to a web page, for readability purpose, highlight the code is important while set the different types of keywords to different colors in a web page by using String.Replace method directly is not available. To handle this issue, we need to use a hashtable variable to store the different languages of code and their related regular expressions with matching options. Furthermore, define the css styles which used to highlight the code in a web page. The sample project can auto add the style object to the matching string of code. A step-by-step guide illustrating how to highlight the code in an ASP.NET page: 1. the HighlightCodePage.aspx page Choose a type of language in the dropdownlist control and paste the code in the textbox control, then click the HighLight button. 2.  Display the highlighted code in an ASP.NET page After user clicks the HighLight button, the highlighted code will be displayed at right side of the page.        CSASPNETPreventMultipleWindows Download: http://1code.codeplex.com/releases/view/62253#DownloadId=215032 This sample demonstrates a step-by-step guide illustrating how to detect and prevent multiple windows or tab usage in Web Applications. The sample imitates a system that need to prevent multiple windows or tabs to solve some problems like sharing sessions, protect duplicated login, data concurrency, etc. In fact, there are many methods achieving this goal. Here we give a solution of use JavaScript, Sample shows how to use window.name property check the correct links and throw other requests to invalid pages. This code-sample use two user controls to make a distinction between base page and target page, user only need drag different controls to appropriate web form pages. so user need not write repetitive code in every page, it will make coding work lightly and convenient for modify your code.  JSVirtualKeyboard Download: http://1code.codeplex.com/releases/view/62253#DownloadId=215093 This article describes an All-In-One framework sample that demonstrates a step-by-step guide illustrating how to build a virtual keyboard in your HTML page. Sometimes we may need to offer a virtual keyboard to let users input something without their real keyboards. This scenario often occurs when users will enter their password to get access to our sites and we want to protect the password from some kinds of back-door software, a Key-logger for example, and we will find a virtual keyboard on the page will be a good choice here. To create a virtual keyboard, we firstly need to add some buttons to the page. And when users click on a certain button, the JavaScript function handling the onclick event will input an appropriated character to the textbox. That is the simple logic of this feature. However, if we indeed want a virtual keyboard to substitute for the real keyboard completely, we will need more advanced logic to handle keys like Caps-Lock and Shift etc. That will be a complex work to achieve. CSASPNETDataListImageGallery Download: http://1code.codeplex.com/releases/view/62261#DownloadId=215267 This code sample demonstrates how to create an Image Gallery application by using the DataList control in ASP.NET. You may find the Image Gallery is widely used in many social networking sites, personal websites and E-Business websites. For example, you may use the Image Gallery to show a library of personal uploaded images on a personal website. Slideshow is also a popular tool to display images on websites. This code sample demonstrates how to use the DataList and ImageButton controls in ASP.NET to create an Image Gallery with image navigation. You can click on a thumbnail image in the Datalist control to display a larger version of the image on the page. This sample code reads the image paths from a certain directory into a FileInfo array. Then, the FileInfo array is used to populate a custom DataTable object which is bound to the Datalist control. This code sample also implements a custom paging system that allows five images to be displayed horizontally on one page. The following link buttons are used to implement a custom paging system:   •     First •     Previous •     Next •     Last Note We recommend that you use this method to load no more than five images at a time. You can also set the SelectedIndex property for the DataList control to limit the number of the thumbnail images that can be selected. To indicate which image is selected, you can set the SelectedStyle property for the DataList control. VBASPNETSearchEngine Download: http://1code.codeplex.com/releases/view/62253#DownloadId=215112 This sample shows how to implement a simple search engine in an ASP.NET web site. It uses LIKE condition in SQL statement to search database. Then it highlights keywords in search result by using Regular Expression and JavaScript. New Windows General code samples CSCheckEXEType, VBCheckEXEType Downloads: http://1code.codeplex.com/releases/view/62253#DownloadId=215045 http://1code.codeplex.com/releases/view/62253#DownloadId=215120 The sample demonstrates how to check an executable file type.  For a given executable file, we can get 1 whether it is a console application 2 whether it is a .Net application 3 whether it is a 32bit native application. 4 The full display name of a .NET application, e.g. System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089, processorArchitecture=MSIL New Internet Explorer code samples CSIEExplorerBar, VBIEExplorerBar Downloads: http://1code.codeplex.com/releases/view/62253#DownloadId=215060 http://1code.codeplex.com/releases/view/62253#DownloadId=215133 The sample demonstrates how to create and deploy an IE Explorer Bar which could list all the images in a web page. CSBrowserHelperObject, VBBrowserHelperObject Downloads: http://1code.codeplex.com/releases/view/62253#DownloadId=215044 http://1code.codeplex.com/releases/view/62253#DownloadId=215119 The sample demonstrates how to create and deploy a Browser Helper Object,  and the BHO in this sample is used to disable the context menu in IE. New Windows Workflow Foundation code samples CSWF4ActivitiesCorrelation Download: http://1code.codeplex.com/releases/view/62253#DownloadId=215085 Consider that there are two such workflow instances:       start                                   start          |                                           | Receive activity      Receive activity         |                                           | Receive2 activity      Receive2 activity         |                                           | A WCF request comes to call the second Receive2 activity. Which one should take care of the request? The answer is Correlation. This sample will show you how to correlate two workflow service to work together. -------------- New ASP.NET code samples CSASPNETBreadcrumbWithQueryString Download: http://1code.codeplex.com/releases/view/62253#DownloadId=215022

  Read the article

• CodePlex Daily Summary for Wednesday, February 29, 2012

  CodePlex Daily Summary for Wednesday, February 29, 2012Popular ReleasesZXing.Net: ZXing.Net 0.4.0.0: sync with rev. 2196 of the java version important fix for RGBLuminanceSource generating barcode bitmaps Windows Phone demo client (only tested with emulator, because I don't have a Windows Phone) Barcode generation support for Windows Forms demo client Webcam support for Windows Forms demo clientOrchard Project: Orchard 1.4: Please read our release notes for Orchard 1.4: http://docs.orchardproject.net/Documentation/Orchard-1-4-Release-NotesFluentData -Micro ORM with a fluent API that makes it simple to query a database: FluentData version 1.2: New features: - QueryValues method - Added support for automapping to enumerations (both int and string are supported). Fixed 2 reported issues.NetSqlAzMan - .NET SQL Authorization Manager: 3.6.0.15: 3.6.0.15 28-Feb-2012 • Fix: The communication object, System.ServiceModel.Channels.ServiceChannel, cannot be used for communication because it is in the Faulted state. Work Item 10435: http://netsqlazman.codeplex.com/workitem/10435 • Fix: Made StorageCache thread safe. Thanks to tangrl. • Fix: Members property of SqlAzManApplicationGroup is not functioning. Thanks to tangrl. Work Item 10267: http://netsqlazman.codeplex.com/workitem/10267 • Fix: Indexer are making database calls. Thanks to t...SCCM Client Actions Tool: Client Actions Tool v1.1: SCCM Client Actions Tool v1.1 is the latest version. It comes with following changes since last version: Added stop button to stop the ongoing process. Added action "Query update status". Added option "saveOnlineComputers" in config.ini to enable saving list of online computers from last session. Default value for "LatestClientVersion" set to SP2 R3 (4.00.6487.2157). Wuauserv service manual startup mode is considered healthy on Windows 7. Errors are now suppressed in checkReleases...Document.Editor: 2012.1: Whats new for Document.Editor 2012.1: Improved Recent Documents list Improved Insert Shape Improved Dialogs Minor Bug Fix's, improvements and speed upsKinect PowerPoint Control: Kinect PowerPoint Control v1.1: Updated for Kinect SDK 1.0.SharpCompress - a fully native C# library for RAR, 7Zip, Zip, Tar, GZip, BZip2: SharpCompress 0.8: API Updates: SOLID Extract Method for Archives (7Zip and RAR). ExtractAllEntries method on Archive classes will extract archives as a streaming file. This can offer better 7Zip extraction performance if any of the entries are solid. The IsSolid method on 7Zip archives will return true if any are solid. Removed IExtractionListener was removed in favor of events. Unit tests show example. Bug fixes: PPMd passes tests plus other fixes (Thanks Pavel) Zip used to always write a Post Descri...Social Network Importer for NodeXL: SocialNetImporter(v.1.3): This new version includes: - Download new networks for Facebook fan pages. - New options for downloading more posts - Bug fixes To use the new graph data provider, do the following: Unzip the Zip file into the "PlugIns" folder that can be found in the NodeXL installation folder (i.e "C:\Program Files\Social Media Research Foundation\NodeXL Excel Template\PlugIns") Open NodeXL template and you can access the new importer from the "Import" menuASP.NET REST Services Framework: Release 1.1 - Standard version: Beginning from v1.1 the REST-services Framework is compatible with ASP.NET Routing model as well with CRUD (Create, Read, Update, and Delete) principle. These two are often important when building REST API functionality within your application. It also includes ability to apply Filters to a class to target all WebRest methods, as well as some performance enhancements. New version includes Metadata Explorer providing ability exploring the existing services that becomes essential as the number ...SQL Live Monitor: SQL Live Monitor 1.31: A quick fix to make it this version work with SQL 2012. Version 2 already has 2012 working, but am still developing the UI in version 2, so this is just an interim fix to allow user to monitor SQL 2012.DotNet.Highcharts: DotNet.Highcharts 1.1 with Examples: Fixed small bug in JsonSerializer about the numbers represented as string. Fixed Issue 310: decimal values don't work Fixed Issue 345: Disable Animation Refactored Highcharts class. Implemented Issue 341: More charts on one page. Added new class Container which can combine and display multiple charts. Usage: new Container(new[] { chart1, chart2, chart3, chart4 }) Implemented Feature 302: Inside an UpdatePanel - Added method (InFunction) which create the Highchart inside JavaScript f...Content Slider Module for DotNetNuke: 01.02.00: This release has the following updates and new features: Feature: One-Click Enabling of Pager Setting Feature: Cache Sliders for Performance Feature: Configurable Cache Setting Enhancement: Transitions can be Selected Bug: Secure Folder Images not Viewable Bug: Sliders Disappear on Postback Bug: Remote Images Cause Error Bug: Deleted Images Cause Error System Requirements DotNetNuke v06.00.00 or newer .Net Framework v3.5 SP1 or newer SQL Server 2005 or newerImage Resizer for Windows: Image Resizer 3 Preview 3: Here is yet another iteration toward what will eventually become Image Resizer 3. This release is stable. However, I'm calling it a preview since there are still many features I'd still like to add before calling it complete. Updated on February 28 to fix an issue with installing on multi-user machines. As usual, here is my progress report. Done Preview 3 Fix: 3206 3076 3077 5688 Fix: 7420 Fix: 7527 Fix: 7576 7612 Preview 2 6308 6309 Fix: 7339 Fix: 7357 Preview 1 UI...Finestra Virtual Desktops: 2.5.4500: This is a bug fix release for version 2.5. It fixes several things and adds a couple of minor features. See the 2.5 release notes for more information on the major new features in that version. Important - If Finestra crashes on startup for you, you must install the Visual C++ 2010 runtime from http://www.microsoft.com/download/en/details.aspx?id=5555. Fixes a bug with window animations not refreshing the screen on XP and with DWM off Fixes a bug with with crashing on XP due to a bug in t...AutoExpandOver - Show popup on mouseover, focus, click in Silverlight: AutoExpandOver 2.1: Many fixes. All leaks are gone. Features added.FileSquirrel: FileSquirrel Alpha 1.2.1 32bit and x64: FileSquirrel Alpha 1.2.1Publishing SCSM Work Item to a Sharepoint Calendar: PublishWI command line tool (Updated): Updated for SCSM 2012 (RC) PublishWI command line tool Usage: PublishWI.exe WIID URL CalendarName WIID: ID of the Work Item to publish (for example, CR3333) URL: URL of the SharePoint site, such as http://www.sharepoint.com CalendarName: The name of the sharepoint calendar to publish WI to.HttpRider - Tool for Web Site Performance and Stress Tests: HttpRider 1.0: Please let me know any issues you face. ThanksMedia Companion: MC 3.432b Release: General Now remembers window location. Catching a few more exceptions when an image is blank TV A couple of UI tweaks Movies Fixed the actor name displaying HTML Fixed crash when using Save files as "movie.nfo", "movie.tbn", & "fanart.jpg" New CSV template for HTML output function Added <createdate> tag for HTML output A couple of UI tweaks Known Issues Multiepisodes are not handled correctly in MC. The created nfo is valid, but they are not displayed in MC correctly & saving the...New Projects.NET Implementation of Extensions for Financial Services: NXFS is planned to be a compliant .Net implementation of CEN/XFS (currently version 3.20) to overcome some deficits of native implementation such as not supporting highly productive programming languages (like C#) and supporting only Windows XP and x86 platform.BigCoder WebMaster Tools: BigCoder WebMaster ToolsBigCoder Whois Program: BigCoder Whois ProgrambiscuitCMS: biscuitCMS makes it easier for <target user group> to <activity>. You'll no longer have to <activity>. It's developed in <programming language>. BridgeSeismic: BridgeSeismicData Normilizer: Decomposer for SQL fact tables, for BI projectsDownload Indexed Cache: "Download Indexed Cache" implements the Bing API Version 2 to retrieve content indexed within the Bing Cache to support the "Search Engine Reconnaissance" section of the OWASP Testing Guide v3. FITSExplorer: FITS Explorer is designed to allow astronomers to quickly and easily browse and preview the image and metadata stored in FITS files. The application was developed using primarily WPF and C#, with some low-level data manipulation routines written in C++ for high-performance.ICalSync: icalsyncLeague Manager: Nosso gerenciador de campeonatosLemcube SISTRI: interfacciamento ai servizi di Interoperabilità SIS.: Lemcube SISTRI: interfacciamento ai servizi di Interoperabilità SIS.LittlePluginLib: A small plugin system based on the .net framework 3.5Log reading: Reading and parsing huge log files, download from ftp server and upload to msql database.Mail Aggregator Service: To address the problem of being 'spammed' by your own alert emails this service was created to group/batch mail messages sent to the same 'to' address. It can integrate into QuickMon or even be used as a stand-alone tool to send out alert notifications. MangoTicTacToe: Demo application of a simple Silverlight game for Windows Phone 7. This tictactoe game features some of the most basics requirements for making a Silverlight game for Windows Phone 7.MonkeyButt: Web alternatives to commercial software like Facebook and Google.PizzaSoft: PizzaSoftproject: project demoSharePoint 2010 Automatically Generated Solution Demo: In this demo project I show how to generate Sandboxed Solutions by code at runtime.SoftService: Software ServiceSPAdmin: SharePoint WarmUp ToolSSASNet: SSASNetSSIS Data Masker: A SSIS Data Flow Transformation Component To Provide Basic Data Masking Capabilities.UpiGppf: This is a high shcool projectXMPP/Media Library for .NET and Windows Phone 7.5: .NET libraries for XMPP, TLS, RTP, STUN, SOCKS and more for windows and windows phone.

  Read the article

• Eclipse (STS), Maven and maven-minify-plugin, can they work together?

  - by CodeReaper

  Hi, I am working on a project where I am in charge of html, css and javascript. I found this maven-minify-plugin that seemed to just what I wanted. Everything is good when I deploy using maven on the server, but when I am using Eclipse (STS, www.springsource.com/products/sts) to run the project on localhost no css nor js file is generated by the plugin. Does anyone have experience with this Maven plugin, so they can tell me if it should be possible or not run on localhost? Does anyone have knowledge of another plugin I can use to (combine and) minify javascript and css files when running on localhost in Eclipse and also when deploying using Maven? Any help appreciated... ----extra information---- I basicly just copied in what it said on the plugin webpage, so I have these bits in my pom.xml: .... <build> <plugins> .... <plugin> <groupId>com.samaxes.maven</groupId> <artifactId>maven-minify-plugin</artifactId> <version>1.1</version> <executions> <execution> <id>default-minify</id> <phase>process-resources</phase> <configuration> <cssFiles> .... <param>forms.css</param> <param>jquery.droppy.css</param> <param>jquery.jgrowl.css</param> </cssFiles> <jsFiles> .... <param>jquery.droppy.js</param> <param>jquery.jgrowl.js</param> </jsFiles> <jsFinalFile>script.js</jsFinalFile> <linebreak>-1</linebreak> <nomunge>false</nomunge> <verbose>false</verbose> <preserveAllSemiColons>false</preserveAllSemiColons> <disableOptimizations>false</disableOptimizations> <bufferSize>4096</bufferSize> </configuration> <goals> <goal>minify</goal> </goals> </execution> </executions> </plugin> </plugins> </build> .... Should/Can I bind the plugin to a difference phase? I just use mvn clean package and move the snapshot into tomcat to deploy on the server. I am unsure on how to explain how I run the webapp on localhost, but here goes. I have a vanilia tomcat, that I defined as a server in Eclipse and then defined that the webapp should always build in that "server".

  Read the article

• C#: Handling Notifications: inheritance, events, or delegates?

  - by James Michael Hare

  Often times as developers we have to design a class where we get notification when certain things happen. In older object-oriented code this would often be implemented by overriding methods -- with events, delegates, and interfaces, however, we have far more elegant options. So, when should you use each of these methods and what are their strengths and weaknesses? Now, for the purposes of this article when I say notification, I'm just talking about ways for a class to let a user know that something has occurred. This can be through any programmatic means such as inheritance, events, delegates, etc. So let's build some context. I'm sitting here thinking about a provider neutral messaging layer for the place I work, and I got to the point where I needed to design the message subscriber which will receive messages from the message bus. Basically, what we want is to be able to create a message listener and have it be called whenever a new message arrives. Now, back before the flood we would have done this via inheritance and an abstract class: 1:  2: // using inheritance - omitting argument null checks and halt logic 3: public abstract class MessageListener 4: { 5: private ISubscriber _subscriber; 6: private bool _isHalted = false; 7: private Thread _messageThread; 8:  9: // assign the subscriber and start the messaging loop 10: public MessageListener(ISubscriber subscriber) 11: { 12: _subscriber = subscriber; 13: _messageThread = new Thread(MessageLoop); 14: _messageThread.Start(); 15: } 16:  17: // user will override this to process their messages 18: protected abstract void OnMessageReceived(Message msg); 19:  20: // handle the looping in the thread 21: private void MessageLoop() 22: { 23: while(!_isHalted) 24: { 25: // as long as processing, wait 1 second for message 26: Message msg = _subscriber.Receive(TimeSpan.FromSeconds(1)); 27: if(msg != null) 28: { 29: OnMessageReceived(msg); 30: } 31: } 32: } 33: ... 34: } It seems so odd to write this kind of code now. Does it feel odd to you? Maybe it's just because I've gotten so used to delegation that I really don't like the feel of this. To me it is akin to saying that if I want to drive my car I need to derive a new instance of it just to put myself in the driver's seat. And yet, unquestionably, five years ago I would have probably written the code as you see above. To me, inheritance is a flawed approach for notifications due to several reasons: Inheritance is one of the HIGHEST forms of coupling. You can't seal the listener class because it depends on sub-classing to work. Because C# does not allow multiple-inheritance, I've spent my one inheritance implementing this class. Every time you need to listen to a bus, you have to derive a class which leads to lots of trivial sub-classes. The act of consuming a message should be a separate responsibility than the act of listening for a message (SRP). Inheritance is such a strong statement (this IS-A that) that it should only be used in building type hierarchies and not for overriding use-specific behaviors and notifications. Chances are, if a class needs to be inherited to be used, it most likely is not designed as well as it could be in today's modern programming languages. So lets look at the other tools available to us for getting notified instead. Here's a few other choices to consider. Have the listener expose a MessageReceived event. Have the listener accept a new IMessageHandler interface instance. Have the listener accept an Action<Message> delegate. Really, all of these are different forms of delegation. Now, .NET events are a bit heavier than the other types of delegates in terms of run-time execution, but they are a great way to allow others using your class to subscribe to your events: 1: // using event - ommiting argument null checks and halt logic 2: public sealed class MessageListener 3: { 4: private ISubscriber _subscriber; 5: private bool _isHalted = false; 6: private Thread _messageThread; 7:  8: // assign the subscriber and start the messaging loop 9: public MessageListener(ISubscriber subscriber) 10: { 11: _subscriber = subscriber; 12: _messageThread = new Thread(MessageLoop); 13: _messageThread.Start(); 14: } 15:  16: // user will override this to process their messages 17: public event Action<Message> MessageReceived; 18:  19: // handle the looping in the thread 20: private void MessageLoop() 21: { 22: while(!_isHalted) 23: { 24: // as long as processing, wait 1 second for message 25: Message msg = _subscriber.Receive(TimeSpan.FromSeconds(1)); 26: if(msg != null && MessageReceived != null) 27: { 28: MessageReceived(msg); 29: } 30: } 31: } 32: } Note, now we can seal the class to avoid changes and the user just needs to provide a message handling method: 1: theListener.MessageReceived += CustomReceiveMethod; However, personally I don't think events hold up as well in this case because events are largely optional. To me, what is the point of a listener if you create one with no event listeners? So in my mind, use events when handling the notification is optional. So how about the delegation via interface? I personally like this method quite a bit. Basically what it does is similar to inheritance method mentioned first, but better because it makes it easy to split the part of the class that doesn't change (the base listener behavior) from the part that does change (the user-specified action after receiving a message). So assuming we had an interface like: 1: public interface IMessageHandler 2: { 3: void OnMessageReceived(Message receivedMessage); 4: } Our listener would look like this: 1: // using delegation via interface - omitting argument null checks and halt logic 2: public sealed class MessageListener 3: { 4: private ISubscriber _subscriber; 5: private IMessageHandler _handler; 6: private bool _isHalted = false; 7: private Thread _messageThread; 8:  9: // assign the subscriber and start the messaging loop 10: public MessageListener(ISubscriber subscriber, IMessageHandler handler) 11: { 12: _subscriber = subscriber; 13: _handler = handler; 14: _messageThread = new Thread(MessageLoop); 15: _messageThread.Start(); 16: } 17:  18: // handle the looping in the thread 19: private void MessageLoop() 20: { 21: while(!_isHalted) 22: { 23: // as long as processing, wait 1 second for message 24: Message msg = _subscriber.Receive(TimeSpan.FromSeconds(1)); 25: if(msg != null) 26: { 27: _handler.OnMessageReceived(msg); 28: } 29: } 30: } 31: } And they would call it by creating a class that implements IMessageHandler and pass that instance into the constructor of the listener. I like that this alleviates the issues of inheritance and essentially forces you to provide a handler (as opposed to events) on construction. Well, this is good, but personally I think we could go one step further. While I like this better than events or inheritance, it still forces you to implement a specific method name. What if that name collides? Furthermore if you have lots of these you end up either with large classes inheriting multiple interfaces to implement one method, or lots of small classes. Also, if you had one class that wanted to manage messages from two different subscribers differently, it wouldn't be able to because the interface can't be overloaded. This brings me to using delegates directly. In general, every time I think about creating an interface for something, and if that interface contains only one method, I start thinking a delegate is a better approach. Now, that said delegates don't accomplish everything an interface can. Obviously having the interface allows you to refer to the classes that implement the interface which can be very handy. In this case, though, really all you want is a method to handle the messages. So let's look at a method delegate: 1: // using delegation via delegate - omitting argument null checks and halt logic 2: public sealed class MessageListener 3: { 4: private ISubscriber _subscriber; 5: private Action<Message> _handler; 6: private bool _isHalted = false; 7: private Thread _messageThread; 8:  9: // assign the subscriber and start the messaging loop 10: public MessageListener(ISubscriber subscriber, Action<Message> handler) 11: { 12: _subscriber = subscriber; 13: _handler = handler; 14: _messageThread = new Thread(MessageLoop); 15: _messageThread.Start(); 16: } 17:  18: // handle the looping in the thread 19: private void MessageLoop() 20: { 21: while(!_isHalted) 22: { 23: // as long as processing, wait 1 second for message 24: Message msg = _subscriber.Receive(TimeSpan.FromSeconds(1)); 25: if(msg != null) 26: { 27: _handler(msg); 28: } 29: } 30: } 31: } Here the MessageListener now takes an Action<Message>.  For those of you unfamiliar with the pre-defined delegate types in .NET, that is a method with the signature: void SomeMethodName(Message). The great thing about delegates is it gives you a lot of power. You could create an anonymous delegate, a lambda, or specify any other method as long as it satisfies the Action<Message> signature. This way, you don't need to define an arbitrary helper class or name the method a specific thing. Incidentally, we could combine both the interface and delegate approach to allow maximum flexibility. Doing this, the user could either pass in a delegate, or specify a delegate interface: 1: // using delegation - give users choice of interface or delegate 2: public sealed class MessageListener 3: { 4: private ISubscriber _subscriber; 5: private Action<Message> _handler; 6: private bool _isHalted = false; 7: private Thread _messageThread; 8:  9: // assign the subscriber and start the messaging loop 10: public MessageListener(ISubscriber subscriber, Action<Message> handler) 11: { 12: _subscriber = subscriber; 13: _handler = handler; 14: _messageThread = new Thread(MessageLoop); 15: _messageThread.Start(); 16: } 17:  18: // passes the interface method as a delegate using method group 19: public MessageListener(ISubscriber subscriber, IMessageHandler handler) 20: : this(subscriber, handler.OnMessageReceived) 21: { 22: } 23:  24: // handle the looping in the thread 25: private void MessageLoop() 26: { 27: while(!_isHalted) 28: { 29: // as long as processing, wait 1 second for message 30: Message msg = _subscriber.Receive(TimeSpan.FromSeconds(1)); 31: if(msg != null) 32: { 33: _handler(msg); 34: } 35: } 36: } 37: } } This is the method I tend to prefer because it allows the user of the class to choose which method works best for them. You may be curious about the actual performance of these different methods. 1: Enter iterations: 2: 1000000 3:  4: Inheritance took 4 ms. 5: Events took 7 ms. 6: Interface delegation took 4 ms. 7: Lambda delegate took 5 ms. Before you get too caught up in the numbers, however, keep in mind that this is performance over over 1,000,000 iterations. Since they are all < 10 ms which boils down to fractions of a micro-second per iteration so really any of them are a fine choice performance wise. As such, I think the choice of what to do really boils down to what you're trying to do. Here's my guidelines: Inheritance should be used only when defining a collection of related types with implementation specific behaviors, it should not be used as a hook for users to add their own functionality. Events should be used when subscription is optional or multi-cast is desired. Interface delegation should be used when you wish to refer to implementing classes by the interface type or if the type requires several methods to be implemented. Delegate method delegation should be used when you only need to provide one method and do not need to refer to implementers by the interface name.

  Read the article

• C# Windows Service XML

  - by Goober

  Scenario I have a windows service written in C# that performs some processing based on parsing an XML file and use that data to carry out various tasks. The service also does various bits of logging - which uses settings from an APP.Config file. The Problem When the service is compiled, installed and run, the XML file seems to disappear. I'm getting the impression that it is just ignored or something like that. So far I've tried using TWO App.Config files, one named App.Config that contains settings for the service, and the other called MyService.exe.config that contains all of the data that was used in the XML file (the idea being that I can parse the XML from a config file that actually gets compiled and appears in my installation directory. However When I do this, all that happens is that ONE config file appears (with the name MyService.exe.config), but it contains the contents of the App.Config file and not the XML data that I want to parse. What I need All I want is to have a config file for my settings, and an XML file for my data. Question Is this possible? I know the application works as it was originally built as a console application that ran fine. Other The application has to be designed this way (as in, I need my data stored as XML, and my settings stored in a config file). Thoughts If I could somehow combine the contents of the two files into ONE config file, that would be one way of solving the problem. However, I have tried this and of course I get a "Type Initialisation Exception", as the config file cannot interprate the XML data (probably because the tags are custom and do not form any part of the config schema - or something like that). Ideas Please could someone explain to me if it is possible for me to have an XML file AND a config file that will actually be compiled and stored in my installation directory for the service when it is run? CODE Custom XML/Data Config File <?xml version="1.0" encoding="utf-8" ?> <configuration> <servers> <SV066930> <add name="Name" value = "SV066930" /> <processes> <SimonTest1> <add name="ProcessName" value="notepad.exe" /> <add name="CommandLine" value="C:\\WINDOWS\\system32\\notepad.exe C:\\WINDOWS\\Profiles\\TA2TOF1\\Desktop\\SimonTest1.txt" /> </SimonTest1> </processes> </SV066930> </servers> </configuration> APP.Config Settings File <?xml version="1.0" encoding="utf-8" ?> <configuration> <configSections> <section name="dataConfiguration" type="Microsoft.Practices.EnterpriseLibrary.Data.Configuration.DatabaseSettings, Microsoft.Practices.EnterpriseLibrary.Data, Version=4.0.0.0, Culture=neutral, PublicKeyToken=xxxxxxxxxxx" /> </configSections> <connectionStrings> <add name="DB" connectionString="Data Source=etc......" /> </connectionStrings> </configuration> Help greatly appreciated.

  Read the article

• CSG operations on implicit surfaces with marching cubes

  - by Mads Elvheim

  I render isosurfaces with marching cubes, (or perhaps marching squares as this is 2D) and I want to do set operations like set difference, intersection and union. I thought this was easy to implement, by simply choosing between two vertex scalars from two different implicit surfaces, but it is not. For my initial testing, I tried with two spheres, and the set operation difference. i.e A - B. One sphere is moving and the other one is stationary. Here's the approach I tried when picking vertex scalars and when classifying corner vertices as inside or outside. The code is written in C++. OpenGL is used for rendering, but that's not important. Normal rendering without any CSG operations does give the expected result. void march(const vec2& cmin, //min x and y for the grid cell const vec2& cmax, //max x and y for the grid cell std::vector<vec2>& tri, float iso, float (*cmp1)(const vec2&), //distance from stationary sphere float (*cmp2)(const vec2&) //distance from moving sphere ) { unsigned int squareindex = 0; float scalar[4]; vec2 verts[8]; /* initial setup of the grid cell */ verts[0] = vec2(cmax.x, cmax.y); verts[2] = vec2(cmin.x, cmax.y); verts[4] = vec2(cmin.x, cmin.y); verts[6] = vec2(cmax.x, cmin.y); float s1,s2; /********************************** ********For-loop of interest****** *******Set difference between **** *******two implicit surfaces****** **********************************/ for(int i=0,j=0; i<4; ++i, j+=2){ s1 = cmp1(verts[j]); s2 = cmp2(verts[j]); if((s1 < iso)){ //if inside sphere1 if((s2 < iso)){ //if inside sphere2 scalar[i] = s2; //then set the scalar to the moving sphere } else { scalar[i] = s1; //only inside sphere1 squareindex |= (1<<i); //mark as inside } } else { scalar[i] = s1; //inside neither sphere } } if(squareindex == 0) return; /* Usual interpolation between edge points to compute the new intersection points */ verts[1] = mix(iso, verts[0], verts[2], scalar[0], scalar[1]); verts[3] = mix(iso, verts[2], verts[4], scalar[1], scalar[2]); verts[5] = mix(iso, verts[4], verts[6], scalar[2], scalar[3]); verts[7] = mix(iso, verts[6], verts[0], scalar[3], scalar[0]); for(int i=0; i<10; ++i){ //10 = maxmimum 3 triangles, + one end token int index = triTable[squareindex][i]; //look up our indices for triangulation if(index == -1) break; tri.push_back(verts[index]); } } This gives me weird jaggies: It looks like the CSG operation is done without interpolation. It just "discards" the whole triangle. Do I need to interpolate in some other way, or combine the vertex scalar values? I'd love some help with this. A full testcase can be downloaded HERE

  Read the article

• Representing game states in Tic Tac Toe

  - by dacman

  The goal of the assignment that I'm currently working on for my Data Structures class is to create a of Quantum Tic Tac Toe with an AI that plays to win. Currently, I'm having a bit of trouble finding the most efficient way to represent states. Overview of current Structure: AbstractGame Has and manages AbstractPlayers (game.nextPlayer() returns next player by int ID) Has and intializes AbstractBoard at the beginning of the game Has a GameTree (Complete if called in initialization, incomplete otherwise) AbstractBoard Has a State, a Dimension, and a Parent Game Is a mediator between Player and State, (Translates States from collections of rows to a Point representation Is a StateConsumer AbstractPlayer Is a State Producer Has a ConcreteEvaluationStrategy to evaluate the current board StateTransveralPool Precomputes possible transversals of "3-states". Stores them in a HashMap, where the Set contains nextStates for a given "3-state" State Contains 3 Sets -- a Set of X-Moves, O-Moves, and the Board Each Integer in the set is a Row. These Integer values can be used to get the next row-state from the StateTransversalPool SO, the principle is Each row can be represented by the binary numbers 000-111, where 0 implies an open space and 1 implies a closed space. So, for an incomplete TTT board: From the Set<Integer> board perspective: X_X R1 might be: 101 OO_ R2 might be: 110 X_X R3 might be: 101, where 1 is an open space, and 0 is a closed space From the Set<Integer> xMoves perspective: X_X R1 might be: 101 OO_ R2 might be: 000 X_X R3 might be: 101, where 1 is an X and 0 is not From the Set<Integer> oMoves perspective: X_X R1 might be: 000 OO_ R2 might be: 110 X_X R3 might be: 000, where 1 is an O and 0 is not Then we see that x{R1,R2,R3} & o{R1,R2,R3} = board{R1,R2,R3} The problem is quickly generating next states for the GameTree. If I have player Max (x) with board{R1,R2,R3}, then getting the next row-states for R1, R2, and R3 is simple.. Set<Integer> R1nextStates = StateTransversalPool.get(R1); The problem is that I have to combine each one of those states with R1 and R2. Is there a better data structure besides Set that I could use? Is there a more efficient approach in general? I've also found Point<-State mediation cumbersome. Is there another approach that I could try there? Thanks! Here is the code for my ConcretePlayer class. It might help explain how players produce new states via moves, using the StateProducer (which might need to become StateFactory or StateBuilder). public class ConcretePlayerGeneric extends AbstractPlayer { @Override public BinaryState makeMove() { // Given a move and the current state, produce a new state Point playerMove = super.strategy.evaluate(this); BinaryState currentState = super.getInGame().getBoard().getState(); return StateProducer.getState(this, playerMove, currentState); } } EDIT: I'm starting with normal TTT and moving to Quantum TTT. Given the framework, it should be as simple as creating several new Concrete classes and tweaking some things.

  Read the article

• WinMo > ASMX WebException - how to get details?

  - by eidylon

  Okay, we've got an application which consists of a website hosting several ASMX webservices, and a handheld application running on WinMo 6.1 which calls the webservices. Been developing in the office, everything works perfect. Now we've gone to install it at the client's and we got all the servers set up and the handhelds installed. However the handhelds are now no longer able to connect to the webservice. I added in extra code in my error handler to specifically trap WebException exceptions and handle them differently in the logging to put out extra information (.Status and .Response). I am getting out the status, which is returning a [7], or ProtocolError. However when I try to read out the ResponseStream (using WebException.Response.GetResponseStream), it is returning a stream with CanRead set to False, and I thus am unable to get any further details of what is going wrong. So I guess there are two things I am asking for help with... a) Any help with trying to get more information out of the WebException? b) What could be causing a ProtocolError exception? Things get extra complicated by the fact that the client has a full-blown log-in-enabled proxy setup going on-site. This was stopping all access to the website initially, even from a browser. So we entered in the login details in the network connection for HTTP on the WinMo device. Now it can get to websites fine. In fact, I can even pull up the webservice fine and call the methods from the browser (PocketIE). So I know the device is able to see the webservices okay via HTTP. But when trying to call them from the .NET app, it throws ProtocolError [7]. Here is my code which is logging the exception and failing to read out the Response from the WebException. Public Sub LogEx(ByVal ex As Exception) Try Dim fn As String = Path.Combine(ini.CorePath, "error.log") Dim t = File.AppendText(fn) t.AutoFlush = True t.WriteLine(<s>===== <%= Format(GetDateTime(), "MM/dd/yyyy HH:mm:ss") %> =====<%= vbCrLf %><%= ex.Message %></s>.Value) t.WriteLine() t.WriteLine(ex.ToString) t.WriteLine() If TypeOf ex Is WebException Then With CType(ex, WebException) t.WriteLine("STATUS: " & .Status.ToString & " (" & Val(.Status) & ")") t.WriteLine("RESPONSE:" & vbCrLf & StreamToString(.Response.GetResponseStream())) End With End If t.WriteLine("=".Repeat(50)) t.WriteLine() t.Close() Catch ix As Exception : Alert(ix) : End Try End Sub Private Function StreamToString(ByVal s As IO.Stream) As String If s Is Nothing Then Return "No response found." // THIS IS THE CASE BEING EXECUTED If Not s.CanRead Then Return "Unreadable response found." Dim rv As String = String.Empty, bytes As Long, buffer(4096) As Byte Using mem As New MemoryStream() Do While True bytes = s.Read(buffer, 0, buffer.Length) mem.Write(buffer, 0, bytes) If bytes = 0 Then Exit Do Loop mem.Position = 0 ReDim buffer(mem.Length) mem.Read(buffer, 0, mem.Length) mem.Seek(0, SeekOrigin.Begin) rv = New StreamReader(mem).ReadToEnd() mem.Close() End Using Return rv.NullOf("Empty response found.") End Function Thanks in advance!

  Read the article

• Mono-LibreOffice System.TypeLoadException

  - by Marco

  In the past I wrote a C# library to work with OpenOffice and this worked fine both in Windows than under Ubuntu with Mono. Part of this library is published here as accepted answer. In these days I discovered that Ubuntu decided to move to LibreOffice, so I tried my library with LibreOffice latest stable release. While under Windows it's working perfectly, under Linux I receive this error: Unhandled Exception: System.TypeLoadException: A type load exception has occurred. [ERROR] FATAL UNHANDLED EXCEPTION: System.TypeLoadException: A type load exception has occurred. Usually Mono tells us which library can't load, so I can install correct package and everything is OK, but in this case I really don't know what's going bad. I'm using Ubuntu oneiric and my library is compiled with Framework 4.0. Under Windows I had to write this into app.config: <?xml version="1.0"?> <configuration> <startup useLegacyV2RuntimeActivationPolicy="true"> <supportedRuntime version="v4.0" sku=".NETFramework,Version=v4.0,Profile=Client"/> </startup> </configuration> because LibreOffice assemblies uses Framework 2.0 (I think). How can I find the reason of this error to solve it? Thanks UPDATE: Even compiling with Framework 2.0 problem (as expected) is the same. Problem (I think) is that Mono is not finding cli-uno-bridge package (installable on previous Ubuntu releases and now marked as superseded), but I cannot be sure. UPDATE 2: I created a test console application referencing cli-uno dlls on Windows (they are registered in GAC_32 and GAC_MSIL). CONSOLE app static void Main(string[] args) { Console.WriteLine("Starting"); string dir = Path.GetDirectoryName(Assembly.GetExecutingAssembly().Location); string doc = Path.Combine(dir, "Liberatoria siti web.docx"); using (QOpenOffice.OpenOffice oo = new QOpenOffice.OpenOffice()) { if (!oo.Init()) return; oo.Load(doc, true); oo.ExportToPdf(Path.ChangeExtension(doc, ".pdf")); } } LIBRARY: using unoidl.com.sun.star.lang; using unoidl.com.sun.star.uno; using unoidl.com.sun.star.container; using unoidl.com.sun.star.frame; using unoidl.com.sun.star.beans; using unoidl.com.sun.star.view; using unoidl.com.sun.star.document; using System.Collections.Generic; using System.IO; using System; namespace QOpenOffice { class OpenOffice : IDisposable { private XComponentContext context; private XMultiServiceFactory service; private XComponentLoader component; private XComponent doc; public bool Init() { Console.WriteLine("Entering Init()"); try { context = uno.util.Bootstrap.bootstrap(); service = (XMultiServiceFactory)context.getServiceManager(); component = (XComponentLoader)service.createInstance("com.sun.star.frame.Desktop"); XNameContainer filters = (XNameContainer)service.createInstance("com.sun.star.document.FilterFactory"); return true; } catch (System.Exception ex) { Console.WriteLine(ex.Message); if (ex.InnerException != null) Console.WriteLine(ex.InnerException.Message); return false; } } } } but I'm not able to see "Starting" !!! If I comment using(...) on application, I see line on console... so I think it's something wrong in DLL. There I'm not able to see "Entering Init()" message on Init(). Behaviour is the same when LibreOffice is not installed and when it is !!! try..catch block is not executed...

  Read the article

< Previous Page | 63 64 65 66 67 68 69 70  | Next Page >