Search Results

Search found 2863 results on 115 pages for 'crash'.

Page 67/115 | < Previous Page | 63 64 65 66 67 68 69 70 71 72 73 74  | Next Page >

  • App Pool crashes before loading mscorsvr. How to troubleshoot?

    - by codepoke
    I have an app pool that recycles every 29 hours, per default. It recycles smoothly 9 times out of 10, and I'm pretty sure the recycle itself is good for the app. Once every couple weeks the recycle does not work. The old worker process dies cleanly and the new worker process starts, but will not serve up content. Recycling the app pool again manually works like a charm. The failed worker process stops and dies cleanly and a second new worker process fires up and serves content perfectly. I took a crash dump against the failed worker process prior to recycling it, and DebugDiag found nothing to complain about. I tried to dig a little deeper using WinDBG, but mscorsvr/mscorwks is not loaded yet 15 minutes after the new process started. There are 14 threads running (4 async) and 20 pending client connections, but .NET is not even loaded into the process yet. Any suggestions where to poke and prod to find a root cause on this?

    Read the article

  • Fusion 3, Windows 7, frequent blue screens

    - by kenny6127
    Is anyone else seeing this problem? A solution would be great (hey, it's Windows, it's gonna blue screen, just gotta deal with it), but it's also nice to know if it's something specific to my configuration, or if a lot of folks are having the same issue. Here's the details: * MacBook Pro 15" unibody, 4 GB, 2.4 GHz, 10.5.8 * Fusion 3.0.1 * Windows 7 Pro, 32-bit (clean install, not migrated from Boot Camp or anything) Blue screens happen nearly every time the MBP cover is closed for a short period of time (< 3 minutes). If the cover is closed for a half hour or longer, the VM is fine. I'm guessing it might be related to sleep, but that's hard to tell, and the Windows crash dump logs are pretty useless. Thanks!

    Read the article

  • Can software operation damage an SD card?

    - by Borek
    My SD card has a broken boot sector and the tools I've tried say that it's not repairable (I've tried TestDisk, DriveRestore Pro and Easeus Partition Recovery). The card was in my Android phone and at one point, it simply shut down and I had to reboot it. After I rebooted it, the SD card was not recognized and since then I've tried to recover it (I don't want to format the card as it contains some data I'd like not to lose although it's nothing critical). My question is, can some software error in Android, or a sudden crash of a system, damage the SD card? Or was it the other way around, the card first died and it brought the system down?

    Read the article

  • Acer Aspire 5532 crashes with no warning

    - by keenan
    I have an Acer Aspire 5532. I don't have more specs off the top of my head but from what I've looked up it has all the factory stock stuff in. My keyboard is completely shot and doesn't work at all. It was working fine for quite a while, however I go to get on it Thanksgiving night and all of a sudden it just crashes with no warning. I try to restart it and it beeps 3 times with about 15 seconds in between each beep. After that it will go to start up and get to the log in screen, and about 3 minutes later it will crash again with absolutely no warning. The same thing happens every time I try to start it up. I've taken it completely apart and cleaned the fan and all the airways. I made sure all the connections are good (or at least all the ones that I can get to above the mother board), put it back together and I get the same problem.

    Read the article

  • Make Ms Word activate window of file if it is already open when I double click the file's icon?

    - by barlop
    When I try to open a word document that is already open, I want it to just activate the window where the file is open. How can I do that? sometimes it takes time to check if an ms word document is already open, I don't to have to have to check through a bunch of open word documents to see if it's in there or not, I just want to double click the icon of a word document, and if it's open then go to it, if not then open it. With the doc/docx or shortcut to the doc/docx , I have some files where when I double click , it activates it when already open. I have other files where double clicking will bring up a "file in use" dialog box. I can't find what is the cause. I want it to always activate the window rather than reopen it. update- maybe that is default behaviour to activate when already open, and after a crash I had that stopped. i'll try deleting the working files and starting ms word again, idea from here

    Read the article

  • Snapshots are disappearing from Time Machine. Why?

    - by AntonAL
    I have TimeMachine enabled for my external HDD. I'm triggering backups manually 2 times per week. I have noticed, that some snapshots, that i made, are gone. I noticed this behaviour several weeks later, but i had doubts. To make it sure, i've recorded screen video with listing snapshots in TimeMachine. After watching my screen recording today, I'm sure, that for Augusut i had 9 snapshots. Now, i have only 3 of them. What's happening ? I had no crash disk reports, errors etc

    Read the article

  • Why do I get a PHP 5.2.6 segmentation fault when using PDO_SQlite?

    - by danieltalsky
    This is an installation on ModWest's shared hosting. I have enabled both PDO and PDO_sqlite on the server and phpinfo() verifies both are running. When I access PDO itself, I'm fine, and getting a meaningful error. <?php $dbh = new PDO(""); ?> This gives me an "Invalid Connection String" error. But, as soon as I begin a connection string with sqlite:, I get a total crash. When I run via the webserver, I'm seeing NO error. When I enter a nonexistant filename, PHP does indeed create the file. I tried running the constructor via CLI and there I do get a simple error: Segmentation Fault I'm not seeing ANYTHING in the PHP 5.2.6 changelogs about this bug. Anyone have any additional troubleshooting steps? The OS is Debian 5.0.4

    Read the article

  • Grub2 menu after vmware gust customization

    - by poopa
    Hi, I have ubuntu 9.10 desktop VMware VM with the default grub2 installed. There is some weird problem with this VM. When you clone this vm and have a customization script run, the cloned machine crashes at first boot (VMware does not officially suport customizaing Ubuntu newer than 8.04). After the creash the Grub boot menu is displayed but there is not time out. I checked /boot/grub/grub.cfg and it does indeed show a timeout of 10 seconds. Nothing happens till I select an option with the keyboard. The second time the Ubuntu loads, it does not crash. My question is, how do I make the grub menu timeout in that case? Thanks.

    Read the article

  • What are the most likely reasons an application would fail on only one of my servers?

    - by Rising Star
    I have several servers to test new code on. I primarily push out asp.NET web applications. Last week, I had an issue where I installed a newly developed web application on three servers. The three servers all run in separate environments. The application worked fine on two of them, but consistently crashed on the third server with each web request. The problem was eventually traced to an in-house developed .dll file being out of date on the third server. I'm certain that this kind of thing happens all the time. However, there are numerous things that could go wrong to cause this kind of behavior. I spent quite a bit of time tracing this problem. I would like to make a list of things to be suspicious of next time this happens. What are the most likely reasons that a web application would crash on one of my servers while identical code runs fine on another server?

    Read the article

  • Spoof database connection to be local instead of remote

    - by spydon
    I am trying to connect one of our clients "as is" programs to a remote database instead of a local one, they say that they have coded it to be able to do it, but for some reason the program crashes when trying to connect to a remote database. I don't have the source code so I can't really dig much deeper than that and the company does not provide any upgrades or custom modifications. I can succesfully connect to the database through SqlDbx and HeidiSQL so I know that the server is set up correctly. This is why I need to find a way to spoof a remote connection on port 1433 to appear like a local database connection to the program. I thought about editing the hosts file, but it will most likely crash other programs if I bind localhost to another IP than 127.0.0.1. Any ideas?

    Read the article

  • Windows 8.1 reset

    - by CreeperInATardis
    I recently had a massive crash on my Windows 8.1 partition, which has rendered it (practically) unusable. I tried to do a refresh, but the problem is, I have a Windows 8 install disk, not 8.1, and thus it didn't work. I also do not have any system restore points/backups of any sort, but I have managed to move my files off. Also, I do not know where my product key is (and cannot find it online), so a clean reinstall would not work. My question is, is there any way to change my Windows 8 disc into an 8.1 disc to allow me to refresh/reset my PC, or is there any other way to do this (aside from repurchasing?) Thanks!

    Read the article

  • Why would an ext3 filsystem be rolled back on a Debian VM running in VirtualBox after loss of power to the host

    - by Sevas
    A Debian Virtual machine runs as a Guest VirtualBox VM. It's filesystem is EXT3. The host system loses power and after booting up the host system and guest VM, I find that the VM's filesystem has been rolled back to a previous state, losing changes made to the filesystem some time before losing power. The operations that were rolled back had been fully completed before the loss of power (files fully copied, file handles closed, etc.), but it's possible and even likely that other write operations were occuring on the VM at the point of the crash. So I am trying to figure out if it's the filesystem recovery process that rolls back filesystem operations after encountering corruption post power loss, or is it possibly related to VirtualBox and the way it ignores flush requests for performance gains by default (discussed here) Are there any other factors that would result in the filesystem being rolled back after losing power?

    Read the article

  • Windows 7 won't recognize my second hard drive after reinstall

    - by Shadur
    I recently suffered a total hardware crash on my windows C: drive. Fortunately, I had a spare disk on hand and set about reinstalling. For some reason, during the install it decided to declare my second windows drive as the booting drive, but once the installation was completed it completely and utterly refuses to acknowledge the filesystem -- I'm not even seeing a drive letter, while it /does/ find the linux partitions on the other two drives (even if it can't read any of them). My first (and most important) question: How can I get windows to re-acknowledge the drive, preferably without losing all the data on it? My second question: How can I tell windows to set up its boot loader on the new C: drive?

    Read the article

  • Seperating paid and free users on SQl Server 2008 R2

    - by Alex
    Right now we have hundreds of "free demo" trial users on the same db server/database with our paid mission critical users. I see this as both a security risk and a load issue. I have also seen cases where demo users run large reports and crash the server.. Does it make sense to separate these users into separate databases on SQL? Rather than just have one DB for all users? My thinking is so one group of users has no effect on the other? Can one group still pose a risk if we do this? I plan to have them on separate web servers also (windows 2008 r2, iis 7, .net 4.0)

    Read the article

  • connection prob

    - by user56944
    Hey guys I use Clear internet ie wireless to get my connection. I play a game online Eve Online which has had on and off CTD(crash to desktop) due to the connection timing out. Usually I have trouble only late at night after work but today I had no connection at 4 pm. They ran a trace route and Im using Ping plotter to do a trace in real time. I have 100% packet loss at hop 2 and Im getting varible loss at hop 6 at ae-72-70.ebr2.Dallas1.Level3.net Also had windows send a dump to Microsoft mentioning the eve file has a problem requiring it to close. Any thoughts ? TIA!

    Read the article

  • All Webcams (integrated or otherwise) have stopped working

    - by cgoddard
    Recently, like in the last few months (incidentally, I didn't notice it at first, but I think it might have coincided with the installation of libusb) all webcams have stopped working on my laptop. But, its not a driver error or anything like that, the webcam claims it is working, but when I try to use it in skype, it tells me that it thinks another program is using my webcam. However, I have tried going through every program and closing it until system crash, but it never becomes available. But the light on the side of the inbuilt webcam doesn't come on. And when I added a second webcam, it became available to the system, installed fine, return error 0 on the devices manager, and when I tried to use it, claimed it was in use. How can I find out what might have gone wrong to be causing the system to think that the webcams are constantly in use?

    Read the article

  • No option to import documents into Google Docs [migrated]

    - by Code Droid
    How do I import document into Google Docs? I don't see an import option. Do I open the drive and drop it in? I am trying to follow these ACRA (Application Crash Report for Android) steps: Login to your Google Docs account Import the CrashReports-template.csv contained in the archive (acra-4.2.3/CrashReport/doc), with conversion enabled Open the imported document Rename it as you like In the Google Docs menu, click on Tools / Form / Create a form Where is import option and conversion enabled? I have Google Docs and I'm on a Mac.

    Read the article

  • Creating a MiniDump of a running process

    - by Lodle
    Im trying to make a tool for my end users that can create a MiniDump of my application if it hangs (i.e. external to the app). Im using the same code as the internal MiniDumper but with the handle and processid of the app but i keep getting error code 0xD0000024 when calling MiniDumpWriteDump. Any ideas? void produceDump( const char* exe ) { DWORD processId = 0; HANDLE process = findProcess(exe, processId); if (!process || processId == 0) { printf("Unable to find exe %s to produce dump.\n", exe); return; } LONG retval = EXCEPTION_CONTINUE_SEARCH; HWND hParent = NULL; // find a better value for your app // firstly see if dbghelp.dll is around and has the function we need // look next to the EXE first, as the one in System32 might be old // (e.g. Windows 2000) HMODULE hDll = NULL; char szDbgHelpPath[_MAX_PATH]; if (GetModuleFileName( NULL, szDbgHelpPath, _MAX_PATH )) { char *pSlash = _tcsrchr( szDbgHelpPath, '\\' ); if (pSlash) { _tcscpy( pSlash+1, "DBGHELP.DLL" ); hDll = ::LoadLibrary( szDbgHelpPath ); } } if (hDll==NULL) { // load any version we can hDll = ::LoadLibrary( "DBGHELP.DLL" ); } LPCTSTR szResult = NULL; int err = 0; if (hDll) { MINIDUMPWRITEDUMP pDump = (MINIDUMPWRITEDUMP)::GetProcAddress( hDll, "MiniDumpWriteDump" ); if (pDump) { char szDumpPath[_MAX_PATH]; char szScratch [_MAX_PATH]; time_t rawtime; struct tm * timeinfo; time ( &rawtime ); timeinfo = localtime ( &rawtime ); char comAppPath[MAX_PATH]; SHGetFolderPath(NULL, CSIDL_COMMON_APPDATA , NULL, SHGFP_TYPE_CURRENT, comAppPath ); //COMMONAPP_PATH _snprintf(szDumpPath, _MAX_PATH, "%s\\DN", comAppPath); CreateDirectory(szDumpPath, NULL); _snprintf(szDumpPath, _MAX_PATH, "%s\\DN\\D", comAppPath); CreateDirectory(szDumpPath, NULL); _snprintf(szDumpPath, _MAX_PATH, "%s\\DN\\D\\dumps", comAppPath); CreateDirectory(szDumpPath, NULL); char fileName[_MAX_PATH]; _snprintf(fileName, _MAX_PATH, "%s_Dump_%04d%02d%02d_%02d%02d%02d.dmp", exe, timeinfo->tm_year+1900, timeinfo->tm_mon, timeinfo->tm_mday, timeinfo->tm_hour, timeinfo->tm_min, timeinfo->tm_sec ); _snprintf(szDumpPath, _MAX_PATH, "%s\\DN\\D\\dumps\\%s", comAppPath, fileName); // create the file HANDLE hFile = ::CreateFile( szDumpPath, GENERIC_WRITE, FILE_SHARE_WRITE, NULL, CREATE_ALWAYS, FILE_ATTRIBUTE_NORMAL, NULL ); if (hFile!=INVALID_HANDLE_VALUE) { MINIDUMP_CALLBACK_INFORMATION mci; mci.CallbackRoutine = (MINIDUMP_CALLBACK_ROUTINE)MyMiniDumpCallback; mci.CallbackParam = 0; MINIDUMP_TYPE mdt = (MINIDUMP_TYPE)(MiniDumpWithPrivateReadWriteMemory | MiniDumpWithDataSegs | MiniDumpWithHandleData | //MiniDumpWithFullMemoryInfo | //MiniDumpWithThreadInfo | MiniDumpWithProcessThreadData | MiniDumpWithUnloadedModules ); // write the dump BOOL bOK = pDump( process, processId, hFile, mdt, NULL, NULL, &mci ); DWORD lastErr = GetLastError(); if (bOK) { printf("Crash dump saved to: %s\n", szDumpPath); return; } else { _snprintf( szScratch, _MAX_PATH, "Failed to save dump file to '%s' (error %u)", szDumpPath, lastErr); szResult = szScratch; err = ERR_CANTSAVEFILE; } ::CloseHandle(hFile); } else { _snprintf( szScratch, _MAX_PATH, "Failed to create dump file '%s' (error %u)", szDumpPath, GetLastError()); szResult = szScratch; err = ERR_CANTMAKEFILE; } } else { szResult = "DBGHELP.DLL too old"; err = ERR_DBGHELP_TOOLD; } } else { szResult = "DBGHELP.DLL not found"; err = ERR_DBGHELP_NOTFOUND; } printf("Could not produce a crash dump of %s.\n\n[error: %u %s].\n", exe, err, szResult); return; } this code works 100% when its internal to the process (i.e. with SetUnhandledExceptionFilter)

    Read the article

  • HP-UX: libstd_v2 in stack trace of JNI code compiled with g++

    - by Miguel Rentes
    Hello, uname -mr: B.11.23 ia64 g++ --version: g++ (GCC) 4.4.0 java -version: Java(TM) SE Runtime Environment (build 1.6.0.06-jinteg_20_jan_2010_05_50-b00) Java HotSpot(TM) Server VM (build 14.3-b01-jre1.6.0.06-rc1, mixed mode) I'm trying to run a Java application that uses JNI. It is crashing inside the JNI code with the following (abbreviated) stack trace: (0) 0xc0000000249353e0 VMError::report_and_die{_ZN7VMError14report_and_dieEv} + 0x440 at /CLO/Components/JAVA_HOTSPOT/Src/src/share/vm/utilities/vmError.cpp:738 [/opt/java6/jre/lib/IA64W/server/libjvm.so] (1) 0xc000000024559240 os::Hpux::JVM_handle_hpux_signal{_ZN2os4Hpux22JVM_handle_hpux_signalEiP9 __siginfoPvi} + 0x760 at /CLO/Components/JAVA_HOTSPOT/Src/src/os_cpu/hp-ux_ia64/vm/os_hp-ux_ia64.cpp:1051 [/opt/java6/jre/lib/IA64W/server/libjvm.so] (2) 0xc0000000245331c0 os::Hpux::signalHandler{_ZN2os4Hpux13signalHandlerEiP9__siginfoPv} + 0x80 at /CLO/Components/JAVA_HOTSPOT/Src/src/os/hp-ux/vm/os_hp-ux.cpp:4295 [/opt/java6/jre/lib/IA64W/server/libjvm.so] (3) 0xe00000010e002620 ---- Signal 11 (SIGSEGV) delivered ---- (4) 0xc0000000000d2d20 __pthread_mutex_lock + 0x400 at /ux/core/libs/threadslibs/src/common/pthreads/mutex.c:3895 [/usr/lib/hpux64/libpthread.so.1] (5) 0xc000000000342e90 __thread_mutex_lock + 0xb0 at ../../../../../core/libs/libc/shared_em_64/../core/threads/wrappers1.c:273 [/usr/lib/hpux64/libc.so.1] (6) 0xc00000000177dff0 _HPMutexWrapper::lock{_ZN15_HPMutexWrapper4lockEPv} + 0x90 [/usr/lib/hpux64/libstd_v2.so.1] (7) 0xc0000000017e9960 std::basic_string,std::allocator{_ZNSsC1ERKSs} + 0x80 [/usr/lib/hpux64/libstd_v2.so.1] (8) 0xc000000008fd9fe0 JniString::str{_ZNK9JniString3strEv} + 0x50 at eg_handler_jni.cxx:50 [/soft/bus-7_0/lib/libbus_registry_jni.so.7.0.0] (9) 0xc000000008fd7060 pt_efacec_se_aut_frk_cmp_registry_REGHandler::getKey{_ZN44pt_efacec_se_aut_frk_cmp_registry_REGHandler6getKeyEP8_jstringi} + 0xa0 [/soft/bus-7_0/lib/libbus_registry_jni.so.7.0.0] (10) 0xc000000008fd17f0 Java_pt_efacec_se_aut_frk_cmp_registry_REGHandler_getKey__Ljava_lang_String_2I + 0xa0 [/soft/bus-7_0/lib/libbus_registry_jni.so.7.0.0] (11) 0x9fffffffdf400ed0 Internal error (-3) while unwinding stack [/CLO/Components/JAVA_HOTSPOT/Src/src/os_cpu/hp-ux_ia64/vm/thread_hp-ux_ia64.cpp:142] This JNI code and dependencies are being compiled using g++, are multithreaded and 64 bit (-pthread -mlp64 -shared -fPIC). The LD_LIBRARY_PATH environment variable is set the dependencies location, and running ldd on the JNI shared libraries finds them all: ldd libbus_registry_jni.so: libefa-d.so.7 = /soft/bus-7_0/lib/libefa-d.so.7 libbus_registry-d.so.7 = /soft/bus-7_0/lib/libbus_registry-d.so.7 libboost_thread-gcc44-mt-d-1_41.so = /usr/local/lib/libboost_thread-gcc44-mt-d-1_41.so libboost_system-gcc44-mt-d-1_41.so = /usr/local/lib/libboost_system-gcc44-mt-d-1_41.so libboost_regex-gcc44-mt-d-1_41.so = /usr/local/lib/libboost_regex-gcc44-mt-d-1_41.so librt.so.1 = /usr/lib/hpux64/librt.so.1 libstdc++.so.6 = /opt/hp-gcc-4.4.0/lib/gcc/ia64-hp-hpux11.23/4.4.0/../../../hpux64/libstdc++.so.6 libm.so.1 = /usr/lib/hpux64/libm.so.1 libgcc_s.so.0 = /opt/hp-gcc-4.4.0/lib/gcc/ia64-hp-hpux11.23/4.4.0/../../../hpux64/libgcc_s.so.0 libunwind.so.1 = /usr/lib/hpux64/libunwind.so.1 librt.so.1 = /usr/lib/hpux64/librt.so.1 libm.so.1 = /usr/lib/hpux64/libm.so.1 libunwind.so.1 = /usr/lib/hpux64/libunwind.so.1 libdl.so.1 = /usr/lib/hpux64/libdl.so.1 libunwind.so.1 = /usr/lib/hpux64/libunwind.so.1 libc.so.1 = /usr/lib/hpux64/libc.so.1 libuca.so.1 = /usr/lib/hpux64/libuca.so.1 Looking at the stack trace, it seams odd that, although ldd list g++'s libstdc++ is being used, the std:string copy c'tor being reported as used is the one in libstd_v2, the implementation provided by aCC. The crash happens in the following code, when method str() returns: class JniString { std::string m_utf8; public: JniString(JNIEnv* env, jstring instance) { const char* utf8Chars = env-GetStringUTFChars(instance, 0); if (utf8Chars == 0) { env-ExceptionClear(); // RPF throw std::runtime_error("GetStringUTFChars returned 0"); } m_utf8.assign(utf8Chars); env-ReleaseStringUTFChars(instance, utf8Chars); } std::string str() const { return m_utf8; } }; Simultaneous usage of the two C++ implementations could likely be a reason for the crash, but that should not be happening. Any ideas?

    Read the article

  • Did I find a bug in PHP's `crypt()`?

    - by Nathan Long
    I think I may have found a bug in PHP's crypt() function under Windows. However: I recognize that it's probably my fault. PHP is used by millions and worked on by thousands; my code is used by tens and worked on by me. (This argument is best explained on Coding Horror.) So I'm asking for help: show me my fault. I've been trying to find it for a few days now, with no luck. The setup I'm using a Windows server installation with Apache 2.2.14 (Win32) and PHP 5.3.2. My development box runs Windows XP Professional; the 'production' server (this is an intranet setup) runs Windows Storage Server 2003. The problem happens on both. I don't see anything in php.ini related to crypt(), but will happily answer questions about my config. The problem Several scripts in my PHP app occasionally hang: the page sits there on 'waiting for localhost' and never finishes. Each of these scripts uses crypt to hash a user's password before storing it in the database, or, in the case of the login page, to hash the entered password before comparing it to the version stored in the database. Since the login page is the simplest, I focused on it for testing. I repeatedly logged in, and found that it would hang maybe 4 out of 10 times. As an experiment, I changed the login page to use the plain text password and changed my password in the database to its plain text version. The page stopped hanging. I saw that PHP's latest version lists this bugfix: Fixed bug #51059 (crypt crashes when invalid salt are [sic] given). So I created a very simple test script, as follows, using the same salt given in an official example: $foo = crypt('rasmuslerdorf','r1'); echo $foo; This page, too, will hang, if I reload it like crazy. I only see it hanging in Chrome, but regardless of browser, the effect on Apache is the same. Effect on Apache When these pages hang, Apache's server-status page (which I explained here, regarding a different problem) increments the number of requests being processed and decrements the number of idle workers. The requests being processed almost all have a status of 'Sending Reply,' though sometimes for a moment they will show either 'Reading request' or 'keepalive (read).' Eventually, Apache may crash. When it does, the Windows crash report looks like this: szAppName: httpd.exe szAppVer: 2.2.14.0 szModName: php5ts.dll szModVer: 5.3.1.0 // OK, this report was before I upgraded to PHP 5.3.2, // but that didn't fix it offset: 00a2615 Is it my fault? I'm tempted to file a bug report to PHP on this. The argument against it is, as stated above, that bugs are nearly always my fault. However, my argument in favor of 'it's PHP's fault' is: I'm using Windows, whereas most servers use Linux (I don't get to choose this), so the chances are greater that I've found an edge case There was recently a bug with crypt(), so maybe it still has issues I have made the simplest test case I can, and I still have the problem Can anyone duplicate this? Can you suggest where I've gone wrong? Should I file the bug after all? Thanks in advance for any help you may give.

    Read the article

  • Better, simpler example of 'semantic conflict'?

    - by rhubbarb
    I like to distinguish three different types of conflict from a version control system (VCS): textual syntactic semantic A textual conflict is one that is detected by the merge or update process. This is flagged by the system. A commit of the result is not permitted by the VCS until the conflict is resolved. A syntactic conflict is not flagged by the VCS, but the result will not compile. Therefore this should also be picked up by even a slightly careful programmer. (A simple example might be a variable rename by Left and some added lines using that variable by Right. The merge will probably have an unresolved symbol. Alternatively, this might introduce a semantic conflict by variable hiding.) Finally, a semantic conflict is not flagged by the VCS, the result compiles, but the code may have problems running. In mild cases, incorrect results are produced. In severe cases, a crash could be introduced. Even these should be detected before commit by a very careful programmer, through either code review or unit testing. My example of a semantic conflict uses SVN (Subversion) and C++, but those choices are not really relevant to the essence of the question. The base code is: int i = 0; int odds = 0; while (i < 10) { if ((i & 1) != 0) { odds *= 10; odds += i; } // next ++ i; } assert (odds == 13579) The Left (L) and Right (R) changes are as follows. Left's 'optimisation' (changing the values the loop variable takes): int i = 1; // L int odds = 0; while (i < 10) { if ((i & 1) != 0) { odds *= 10; odds += i; } // next i += 2; // L } assert (odds == 13579) Right's 'optimisation' (changing how the loop variable is used): int i = 0; int odds = 0; while (i < 5) // R { odds *= 10; odds += 2 * i + 1; // R // next ++ i; } assert (odds == 13579) This is the result of a merge or update, and is not detected by SVN (which is correct behaviour for the VCS). int i = 1; // L int odds = 0; while (i < 5) // R { odds *= 10; odds += 2 * i + 1; // R // next i += 2; // L } assert (odds == 13579) The assert fails because odds is 37. So my question is as follows. Is there a simpler example than this? Is there a simple example where the compiled executable has a new crash? As a secondary question, are there cases of this that you have encountered in real code? Again, simple examples are especially welcome.

    Read the article

  • populate uipicker view with results from core data DB using an NSArray

    - by Chris
    I am trying to populate a UIPickerView with the results of a NSFetchRequest. The results of the NSFetchRequest are then stored in an NSArray. I am using Core Data to interact with the SQLite DB. I have a simple class file that contains a UIPickerView that is associated with a storyboard scene in my project. The header file for the class looks like the following, ViewControllerUsers.h #import <UIKit/UIKit.h> #import "AppDelegate.h" @interface ViewControllerUsers : UIViewController <NSFetchedResultsControllerDelegate, UIPickerViewDelegate, UIPickerViewDataSource> { NSArray *dictionaries; } @property (nonatomic, strong) NSFetchedResultsController *fetchedResultsController; // Core Data @property (strong, nonatomic) NSManagedObjectContext *managedObjectContext; @property (nonatomic, strong) NSArray *users; @property (strong, nonatomic) IBOutlet UIPickerView *uiPickerViewUsers; @property (weak, nonatomic) IBOutlet UIBarButtonItem *btnDone; @property (weak, nonatomic) IBOutlet UIButton *btnChangePin; // added for testing purposes @property (nonatomic, strong) NSArray *usernames; - (IBAction)dismissScene:(id)sender; - (IBAction)changePin:(id)sender; @end The implementation file looks like the following, ViewControllerUsers.m #import "ViewControllerUsers.h" @interface ViewControllerUsers () @end @implementation ViewControllerUsers // Core Data @synthesize managedObjectContext = _managedObjectContext; @synthesize uiPickerViewUsers = _uiPickerViewUsers; @synthesize usernames = _usernames; - (id)initWithNibName:(NSString *)nibNameOrNil bundle:(NSBundle *)nibBundleOrNil { self = [super initWithNibName:nibNameOrNil bundle:nibBundleOrNil]; if (self) { // Custom initialization } return self; } - (void)viewDidLoad { [super viewDidLoad]; // Do any additional setup after loading the view. // Core Data if (_managedObjectContext == nil) { _managedObjectContext = [(AppDelegate *)[[UIApplication sharedApplication] delegate] managedObjectContext]; NSLog(@"After _managedObjectContext: %@", _managedObjectContext); } NSFetchRequest *request = [NSFetchRequest fetchRequestWithEntityName:@"Account"]; NSEntityDescription *entity = [NSEntityDescription entityForName:@"Account" inManagedObjectContext:_managedObjectContext]; request.resultType = NSDictionaryResultType; request.propertiesToFetch = [NSArray arrayWithObject:[[entity propertiesByName] objectForKey:@"username"]]; request.returnsDistinctResults = YES; _usernames = [_managedObjectContext executeFetchRequest:request error:nil]; NSLog (@"names: %@",_usernames); } -(NSInteger)numberOfComponentsInPickerView:(UIPickerView *)pickerView { //One column return 1; } -(NSInteger)pickerView:(UIPickerView *)pickerView numberOfRowsInComponent:(NSInteger)component { //set number of rows return _usernames.count; } -(NSString *)pickerView:(UIPickerView *)pickerView titleForRow:(NSInteger)row forComponent:(NSInteger)component { //set item per row return [_usernames objectAtIndex:row]; } - (void)didReceiveMemoryWarning { [super didReceiveMemoryWarning]; // Dispose of any resources that can be recreated. } - (void)viewDidUnload { [self setBtnDone:nil]; [self setUiPickerViewUsers:nil]; [self setBtnChangePin:nil]; [super viewDidUnload]; } - (IBAction)dismissScene:(id)sender { [self dismissModalViewControllerAnimated:YES]; } - (IBAction)changePin:(id)sender { } @end The current code is causing the app to crash, but the NSLog is show the results of the NSFetchRequest in the NSArray. I currently think that I am not formatting the results of the NSFetchRequest in the NSArray properly if I had to take a guess. The crash log looks like the following, 2013-06-26 16:49:24.219 KegCop[41233:c07] names: ( { username = blah; }, { username = chris; }, { username = root; } ) 2013-06-26 16:49:24.223 KegCop[41233:c07] -[NSKnownKeysDictionary1 isEqualToString:]: unrecognized selector sent to instance 0xe54d9a0 2013-06-26 16:49:24.223 KegCop[41233:c07] Terminating app due to uncaught exception 'NSInvalidArgumentException', reason: '-[NSKnownKeysDictionary1 isEqualToString:]: unrecognized selector sent to instance 0xe54d9a0' First throw call stack:

    Read the article

  • Received memory warning on setimage

    - by Sam Budda
    This problem has completely stumped me. This is for iOS 5.0 with Xcode 4.2 What's going on is that in my app I let user select images from their photo album and I save those images to apps document directory. Pretty straight forward. What I do then is that in one of the viewController.m files I create multiple UIImageViews and I then set the image for the image view from one of the picture that user selected from apps dir. The problem is that after a certain number of UIImage sets I receive a "Received memory warning". It usually happens when there are 10 pictures. If lets say user selected 11 pictures then the app crashes with Error (GBC). NOTE: each of these images are at least 2.5 MB a piece. After hours of testing I finally narrowed down the problem to this line of code [button1AImgVw setImage:image]; If I comment out that code. All compiles fine and no memory errors happen. But if I don't comment out that code I receive memory errors and eventually a crash. Also note it does process the whole CreateViews IBAction but still crashes at the end. I cannot do release or dealloc since I am running this on iOS 5.0 with Xcode 4.2 Here is the code that I used. Can anyone tell me what did I do wrong? - (void)viewDidLoad { [super viewDidLoad]; // Do any additional setup after loading the view, typically from a nib. [self CreateViews]; } -(IBAction) CreateViews { paths = NSSearchPathForDirectoriesInDomains(NSDocumentDirectory, NSUserDomainMask ,YES); documentsPath = [paths objectAtIndex:0]; //here 15 is for testing purposes for (int i = 0; i < 15; i++) { //Lets not get bogged down here. The problem is not here UIImageView *button1AImgVw = [[UIImageView alloc] initWithFrame:CGRectMake(10*i, 10, 10, 10)]; [self.view addSubview:button1AImgVw]; NSMutableString *picStr1a = [[NSMutableString alloc] init]; NSString *dataFile1a = [[NSString alloc] init]; picStr1a = [NSMutableString stringWithFormat:@"%d.jpg", i]; dataFile1a = [documentsPath stringByAppendingPathComponent:picStr1a]; NSData *potraitImgData1a =[[NSData alloc] initWithContentsOfFile:dataFile1a]; UIImage *image = [[UIImage alloc] initWithData:potraitImgData1a]; // This is causing my app to crash if I load more than 10 images! //[button1AImgVw setImage:image]; } NSLog(@"It went to END!"); } //Error I get when 10 images are selected. App does launch and work 2012-10-07 17:12:51.483 ABC-APP[7548:707] It went to END! 2012-10-07 17:12:51.483 ABC-APP [7531:707] Received memory warning. //App crashes with this error when there are 11 images 2012-10-07 17:30:26.339 ABC-APP[7548:707] It went to END! (gdb)

    Read the article

  • sherlock actionbar menu

    - by user1647443
    I am trying to setup a menu programatically and my method gets com.actionbarsherlock.view.Menu menu as a parameter. As I want to change the styling of the menu item I am trying to setup a SpannableString spannable and pass it to add. menu.add(0, MENU_ABOUT, 0, spannable); This is causing a crash only in ICS when I cick that menu item. Any ideas if I am missing something. Thanks Here is the code I am trying and it crashes when I run the app and select "About Application". FYI, I am using SpannableString because I want to add some styling and color to the menu item. The crash does NOT happen if I use a regular string, but then I cant do styling public boolean onCreateOptionsMenu(com.actionbarsherlock.view.Menu menu) { SpannableString spannable = new SpannableString("About Application"); menu.add(0, MENU_ABOUT, 0, spannable); return true; } Here is the stack trace: 09-05 02:25:32.849: E/AndroidRuntime(684): FATAL EXCEPTION: main 09-05 02:25:32.849: E/AndroidRuntime(684): java.lang.IllegalArgumentException: Invalid payload item type 09-05 02:25:32.849: E/AndroidRuntime(684): at android.util.EventLog.writeEvent(Native Method) 09-05 02:25:32.849: E/AndroidRuntime(684): at android.app.Activity.onMenuItemSelected(Activity.java:2501) 09-05 02:25:32.849: E/AndroidRuntime(684): at android.support.v4.app.FragmentActivity.onMenuItemSelected(FragmentActivity.java:351) 09-05 02:25:32.849: E/AndroidRuntime(684): at com.android.internal.policy.impl.PhoneWindow.onMenuItemSelected(PhoneWindow.java:950) 09-05 02:25:32.849: E/AndroidRuntime(684): at com.android.internal.view.menu.MenuBuilder.dispatchMenuItemSelected(MenuBuilder.java:735) 09-05 02:25:32.849: E/AndroidRuntime(684): at com.android.internal.view.menu.MenuItemImpl.invoke(MenuItemImpl.java:149) 09-05 02:25:32.849: E/AndroidRuntime(684): at com.android.internal.view.menu.MenuBuilder.performItemAction(MenuBuilder.java:874) 09-05 02:25:32.849: E/AndroidRuntime(684): at com.android.internal.view.menu.ListMenuPresenter.onItemClick(ListMenuPresenter.java:163) 09-05 02:25:32.849: E/AndroidRuntime(684): at android.widget.AdapterView.performItemClick(AdapterView.java:292) 09-05 02:25:32.849: E/AndroidRuntime(684): at android.widget.AbsListView.performItemClick(AbsListView.java:1058) 09-05 02:25:32.849: E/AndroidRuntime(684): at android.widget.AbsListView$PerformClick.run(AbsListView.java:2514) 09-05 02:25:32.849: E/AndroidRuntime(684): at android.widget.AbsListView.onTouchEvent(AbsListView.java:3180) 09-05 02:25:32.849: E/AndroidRuntime(684): at android.view.View.dispatchTouchEvent(View.java:5541) 09-05 02:25:32.849: E/AndroidRuntime(684): at android.view.ViewGroup.dispatchTransformedTouchEvent(ViewGroup.java:1951) 09-05 02:25:32.849: E/AndroidRuntime(684): at android.view.ViewGroup.dispatchTouchEvent(ViewGroup.java:1712) 09-05 02:25:32.849: E/AndroidRuntime(684): at android.view.ViewGroup.dispatchTransformedTouchEvent(ViewGroup.java:1957) 09-05 02:25:32.849: E/AndroidRuntime(684): at android.view.ViewGroup.dispatchTouchEvent(ViewGroup.java:1726) 09-05 02:25:32.849: E/AndroidRuntime(684): at com.android.internal.policy.impl.PhoneWindow$DecorView.dispatchTouchEvent(PhoneWindow.java:1860) 09-05 02:25:32.849: E/AndroidRuntime(684): at android.view.View.dispatchPointerEvent(View.java:5721) 09-05 02:25:32.849: E/AndroidRuntime(684): at android.view.ViewRootImpl.deliverPointerEvent(ViewRootImpl.java:2890) 09-05 02:25:32.849: E/AndroidRuntime(684): at android.view.ViewRootImpl.handleMessage(ViewRootImpl.java:2466) 09-05 02:25:32.849: E/AndroidRuntime(684): at android.view.ViewRootImpl.processInputEvents(ViewRootImpl.java:845) 09-05 02:25:32.849: E/AndroidRuntime(684): at android.view.ViewRootImpl.handleMessage(ViewRootImpl.java:2475) 09-05 02:25:32.849: E/AndroidRuntime(684): at android.os.Handler.dispatchMessage(Handler.java:99) 09-05 02:25:32.849: E/AndroidRuntime(684): at android.os.Looper.loop(Looper.java:137) 09-05 02:25:32.849: E/AndroidRuntime(684): at android.app.ActivityThread.main(ActivityThread.java:4424) 09-05 02:25:32.849: E/AndroidRuntime(684): at java.lang.reflect.Method.invokeNative(Native Method) 09-05 02:25:32.849: E/AndroidRuntime(684): at java.lang.reflect.Method.invoke(Method.java:511) 09-05 02:25:32.849: E/AndroidRuntime(684): at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:784) 09-05 02:25:32.849: E/AndroidRuntime(684): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:551) 09-05 02:25:32.849: E/AndroidRuntime(684): at dalvik.system.NativeStart.main(Native Method) Thanks

    Read the article

  • Ubuntu 12.04LTS mountall: Disconnected from Plymouth

    - by user169954
    I have ubuntu 12.04LTS 64bit running on an i5 dual core 8G RAM. On startup I get the message mountall: Disconnected from Plymouth [OK] And the system looks stuck. However, if I go to tty1, then I can login and startx and everything seems to be fine except for being a bit sluggish. I can verify that my nfs mounts are ok, and that my swap is ok. Every time I reboot the system there is a _gdm_gdm_crash file in my /var/crash, which makes me think my problem is rooted in gdm, X configs and/or nvidia drivers. A bit of background in case it's relevant: 3 hours ago my desktop crashed. Following various 'tips' on the web I made a complete mess of my X server and X configuration files, and at one point I even had to recreate my swap partition. Anyway, after much struggle I managed to get to the state I mentioned above: I have a working system provided I always login through tty1. What is this Plymouth anyway? Would it make a difference if I used gnome-wm instead of gdm or lightdm? (I mean to the startup, not to me :-) What bit of config do I change to tell startx to use gnome-wm not gdm or ligthdm? Thank you in advance

    Read the article

< Previous Page | 63 64 65 66 67 68 69 70 71 72 73 74  | Next Page >