Search Results

Search found 1784 results on 72 pages for 'depth'.

Page 67/72 | < Previous Page | 63 64 65 66 67 68 69 70 71 72  | Next Page >

• LightDM will not start after stopping it

  - by Sweeters

  I am running Ubuntu 11.10 "Oneiric Ocelot", and in trying to install the nvidia CUDA developer drivers I switched to a virtual terminal (Ctrl-Alt-F5) and stopped lightdm (installation required that no X server instance be running) through sudo service lightdm stop. Re-starting lightdm with sudo service lightdm start did not work: A couple of * Starting [...] lines where displayed, but the process hanged. (I do not remember at which point, but I think it was * Starting System V runlevel compatibility. I manually rebooted my laptop, and ever since booting seems to hang, usually around the * Starting anac(h)ronistic cron [OK] log line (not consistently at that point, though). From that point on, I seem to be able to interact with my system only through a tty session (Ctrl-Alt-F1). I've tried purging and reinstalling both lightdm and gdm, as well as selecting both as the default display managers (through sudo dpkg-reconfigure [lightdm / gdm] or by manually editing /etc/X11/default-display-manager) through both apt-get and aptitude (that shouldn't make a difference anyway) after updating the packages, but the problem persists. Some of the responses I'm getting are the following: After running sudo dpkg-reconfigure lightdm (but not ... gdm) I get the following message: dpkg-maintscript-helper:warning: environment variable DPKG_MATINSCRIPT_NAME missing dpkg-maintscript-helper:warning: environment variable DPKG_MATINSCRIPT_PACKAGE missing After trying sudo service lightdm start or sudo start lightdm I get to see the boot loading screen again but nothing changes. If I go back to the tty shell I see lightdm start/running, process <num> but ps -e | grep lightdm gives no output. After trying sudo service gdm start or sudo starg gdm I get the gdm start/running, process <num> message, and gdm-binary is supposedly an active process, but all that happens is that the screen blinks a couple of times and nothing else. Other candidate solutions that I'd found on the web included running startx but when I try that I get an error output [...] Fatal server error: no screens found [...]. Moreover, I made sure that lightdm-gtk-greeter is installed but that did not help either. Please excuse my not including complete outputs/logs; I am writing this post from another computer and it's hard to manually copy the complete logs. Also, I've seen several posts that had to do with similar problems, but either there was no fix, or the one suggested did not work for me. In closing: Please help! I very much hope to avoid re-installing Ubuntu from scratch! :) Alex @mosi I did not manage to fix the NVIDIA kernel driver as per your instructions. I should perhaps mention that I'm on a Dell XPS15 laptop with an NVIDIA Optimus graphics card, and that I have bumblebee installed (which installs nvidia drivers during its installation, I believe). Issuing the mentioned commands I get the following: ~$uname -r 3.0.0-12-generic ~$lsmod | grep -i nvidia nvidia 11713772 0 ~$dmesg | grep -i nvidia [ 8.980041] nvidia: module license 'NVIDIA' taints kernel. [ 9.354860] nvidia 0000:01:00.0: power state changed by ACPI to D0 [ 9.354864] nvidia 0000:01:00.0: power state changed by ACPI to D0 [ 9.354868] nvidia 0000:01:00.0: enabling device (0006 -> 0007) [ 9.354873] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 9.354879] nvidia 0000:01:00.0: setting latency timer to 64 [ 9.355052] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 280.13 Wed Jul 27 16:53:56 PDT 2011 Also, running aptitude search nvidia gives me the following: p nvidia-173 - NVIDIA binary Xorg driver, kernel module a p nvidia-173-dev - NVIDIA binary Xorg driver development file p nvidia-173-updates - NVIDIA binary Xorg driver, kernel module a p nvidia-173-updates-dev - NVIDIA binary Xorg driver development file p nvidia-96 - NVIDIA binary Xorg driver, kernel module a p nvidia-96-dev - NVIDIA binary Xorg driver development file p nvidia-96-updates - NVIDIA binary Xorg driver, kernel module a p nvidia-96-updates-dev - NVIDIA binary Xorg driver development file p nvidia-cg-toolkit - Cg Toolkit - GPU Shader Authoring Language p nvidia-common - Find obsolete NVIDIA drivers i nvidia-current - NVIDIA binary Xorg driver, kernel module a p nvidia-current-dev - NVIDIA binary Xorg driver development file c nvidia-current-updates - NVIDIA binary Xorg driver, kernel module a p nvidia-current-updates-dev - NVIDIA binary Xorg driver development file i nvidia-settings - Tool of configuring the NVIDIA graphics dr p nvidia-settings-updates - Tool of configuring the NVIDIA graphics dr v nvidia-va-driver - v nvidia-va-driver - I've tried manually installing (sudo aptitude install <package>) packages nvidia-common and nvidia-settings-updates but to no avail. For example, sudo aptitude install nvidia-settings-updates returns the following log: Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... No packages will be installed, upgraded, or removed. 0 packages upgraded, 0 newly installed, 0 to remove and 83 not upgraded. Need to get 0 B of archives. After unpacking 0 B will be used. Writing extended state information... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... The same happens with the Linux headers (i.e. I cannot seem to be able to install linux-headers-3.0.0-12-generic). The output of aptitude search linux-headers is as follows: v linux-headers - v linux-headers - v linux-headers-2.6 - i linux-headers-2.6.38-11 - Header files related to Linux kernel versi i linux-headers-2.6.38-11-generic - Linux kernel headers for version 2.6.38 on i A linux-headers-2.6.38-8 - Header files related to Linux kernel versi i A linux-headers-2.6.38-8-generic - Linux kernel headers for version 2.6.38 on v linux-headers-3 - v linux-headers-3.0 - v linux-headers-3.0 - i A linux-headers-3.0.0-12 - Header files related to Linux kernel versi p linux-headers-3.0.0-12-generic - Linux kernel headers for version 3.0.0 on p linux-headers-3.0.0-12-generic- - Linux kernel headers for version 3.0.0 on p linux-headers-3.0.0-12-server - Linux kernel headers for version 3.0.0 on p linux-headers-3.0.0-12-virtual - Linux kernel headers for version 3.0.0 on p linux-headers-generic - Generic Linux kernel headers p linux-headers-generic-pae - Generic Linux kernel headers v linux-headers-lbm - v linux-headers-lbm - v linux-headers-lbm-2.6 - v linux-headers-lbm-2.6 - p linux-headers-lbm-3.0.0-12-gene - Header files related to linux-backports-mo p linux-headers-lbm-3.0.0-12-gene - Header files related to linux-backports-mo p linux-headers-lbm-3.0.0-12-serv - Header files related to linux-backports-mo p linux-headers-server - Linux kernel headers on Server Equipment. p linux-headers-virtual - Linux kernel headers for virtual machines @heartsmagic I did try purging and reinstalling any nvidia driver packages, but it did not seem to make a difference, My xorg.conf file contains the following: # nvidia-xconfig: X configuration file generated by nvidia-xconfig # nvidia-xconfig: version 280.13 ([email protected]) Wed Jul 27 17:15:58 PDT 2011 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "Unknown" HorizSync 28.0 - 33.0 VertRefresh 43.0 - 72.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 SubSection "Display" Depth 24 EndSubSection EndSection

  Read the article

• Developer’s Life – Attitude and Communication – They Can Cause Problems – Notes from the Field #027

  - by Pinal Dave

  [Note from Pinal]: This is a 27th episode of Notes from the Field series. The biggest challenge for anyone is to understand human nature. We human have so many things on our mind at any moment of time. There are cases when what we say is not what we mean and there are cases where what we mean we do not say. We do say and things as per our mood and our agenda in mind. Sometimes there are incidents when our attitude creates confusion in the communication and we end up creating a situation which is absolutely not warranted. In this episode of the Notes from the Field series database expert Mike Walsh explains a very crucial issue we face in our career, which is not technical but more to relate to human nature. Read on this may be the best blog post you might read in recent times. In this week’s note from the field, I’m taking a slight departure from technical knowledge and concepts explained. We’ll be back to it next week, I’m sure. Pinal wanted us to explain some of the issues we bump into and how we see some of our customers arrive at problem situations and how we have helped get them back on the right track. Often it is a technical problem we are officially solving – but in a lot of cases as a consultant, we are really helping fix some communication difficulties. This is a technical blog post and not an “advice column” in a newspaper – but the longer I am a consultant, the more years I add to my experience in technology the more I learn that the vast majority of the problems we encounter have “soft skills” included in the chain of causes for the issue we are helping overcome. This is not going to be exhaustive but I hope that sharing four pieces of advice inspired by real issues starts a process of searching for places where we can be the cause of these challenges and look at fixing them in ourselves. Or perhaps we can begin looking at resolving them in teams that we manage. I’ll share three statements that I’ve either heard, read or said and talk about some of the communication or attitude challenges highlighted by the statement. 1 – “But that’s the SAN Administrator’s responsibility…” I heard that early on in my consulting career when talking with a customer who had serious corruption and no good recent backups – potentially no good backups at all. The statement doesn’t have to be this one exactly, but the attitude here is an attitude of “my job stops here, and I don’t care about the intent or principle of why I’m here.” It’s also a situation of having the attitude that as long as there is someone else to blame, I’m fine…  You see in this case, the DBA had a suspicion that the backups were not being handled right.  They were the DBA and they knew that they had responsibility to ensure SQL backups were good to go – it’s a basic requirement of a production DBA. In my “As A DBA Where Do I start?!” presentation, I argue that is job #1 of a DBA. But in this case, the thought was that there was someone else to blame. Rather than create extra work and take on responsibility it was decided to just let it be another team’s responsibility. This failed the company, the company’s customers and no one won. As technologists – we should strive to go the extra mile. If there is a lack of clarity around roles and responsibilities and we know it – we should push to get it resolved. Especially as the DBAs who should act as the advocates of the data contained in the databases we are responsible for. 2 – “We’ve always done it this way, it’s never caused a problem before!” Complacency. I have to say that many failures I’ve been paid good money to help recover from would have not happened had it been for an attitude of complacency. If any thoughts like this have entered your mind about your situation you may be suffering from it. If, while reading this, you get this sinking feeling in your stomach about that one thing you know should be fixed but haven’t done it.. Why don’t you stop and go fix it then come back.. “We should have better backups, but we’re on a SAN so we should be fine really.” “Technically speaking that could happen, but what are the chances?” “We’ll just clean that up as a fast follow” ..and so on. In the age of tightening IT budgets, increased expectations of up time, availability and performance there is no room for complacency. Our customers and business units expect – no demand – the best. Complacency says “we will give you second best or hopefully good enough and we accept the risk and know this may hurt us later. Sometimes an organization will opt for “good enough” and I agree with the concept that at times the perfect can be the enemy of the good. But when we make those decisions in a vacuum and are not reporting them up and discussing them as an organization that is different. That is us unilaterally choosing to do something less than the best and purposefully playing a game of chance. 3 – “This device must accept interference from other devices but not create any” I’ve paraphrased this one – but it’s something the Federal Communications Commission – a federal agency in the United States that regulates electronic communication – requires of all manufacturers of any device that could cause or receive interference electronically. I blogged in depth about this here (http://www.straightpathsql.com/archives/2011/07/relationship-advice-from-the-fcc/) so I won’t go into much detail other than to say this… If we all operated more on the premise that we should do our best to not be the cause of conflict, and to be less easily offended and less upset when we perceive offense life would be easier in many areas! This doesn’t always cause the issues we are called in to help out. Not directly. But where we see it is in unhealthy relationships between the various technology teams at a client. We’ll see teams hoarding knowledge, not sharing well with others and almost working against other teams instead of working with them. If you trace these problems back far enough it often stems from someone or some group of people violating this principle from the FCC. To Sum It Up Technology problems are easy to solve. At Linchpin People we help many customers get past the toughest technological challenge – and at the end of the day it is really just a repeatable process of pattern based troubleshooting, logical thinking and starting at the beginning and carefully stepping through to the end. It’s easy at the end of the day. The tough part of what we do as consultants is the people skills. Being able to help get teams working together, being able to help teams take responsibility, to improve team to team communication? That is the difficult part, and we get to use the soft skills on every engagement. Work on professional development (http://professionaldevelopment.sqlpass.org/) and see continuing improvement here, not just with technology. I can teach just about anyone how to be an excellent DBA and performance tuner, but some of these soft skills are much more difficult to teach. If you want to get started with performance analytics and triage of virtualized SQL Servers with the help of experts, read more over at Fix Your SQL Server. Reference: Pinal Dave (http://blog.sqlauthority.com)Filed under: Notes from the Field, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL

  Read the article

• September Independent Oracle User Group (IOUG) Regional Events:

  - by Mandy Ho

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif";} September 5, 2012 – Denver, CO Oracle 11g Database Upgrade Seminar Join Roy Swonger, Senior Director of software development at Oracle to learn about upgrading to Oracle Database 11g. Topics include: All the required preparatory steps Database upgrade strategies Post-upgrade performance analysis Helpful tips and common pitfalls to watch out for http://www.oracle.com/webapps/events/ns/EventsDetail.jsp?p_eventId=152242&src=7598177&src=7598177&Act=4 September 6, 2012 – Salt Lake City, UT Fall Symposium 2012 Plan to join us for our annual fall event on Sept 6. They day will be filled with learning and networking with tracks focused on Applications, APEX, BI, Development and DBA Topics. This event is free for UTOUG members to attend, but please register. http://www.utoug.org/apex/f?p=972:2:6686308836668467::::P2_EVENT_ID:121 September 6, 2012 – Portland, OR Oracle’s Hands on Workshop Series focused on providing Defense-in-Depth Solutions to secure data at the source, reduce risk and simplify compliance The Oracle Database Security Workshop is a one-day hands-on session for IT Managers, IT Security Architects and Oracle DBAs who are looking for solutions to address their information protection, privacy, and accountability challenges within their Oracle database environment. Most security programs offered today fail toadequately address database security. Customers continue to be challenged tosecure information against loss and protect the integrity of sensitiveinformation like critical financial data, personally identifiable information(PII) and credit card data for PCI compliance. http://nwoug.org/content.aspx?page_id=87&club_id=165905&item_id=241082 September 11, 2012 – Montreal, QC APEXposed! For APEX aficionados – join ODTUG in Montreal, September 11-12 for APEXposed! Topics will include Dynamic Actions, Plug-ins, Tuning, and Building Mobile Apps. The cost is $399 US and early registration ends August 15th. For more information: http://www.odtugapextraining.com  September 11, 2012 – Philadelphia, PA Big Data & What are we still doing wrong with Tom Kyte Tom Kyte is a Senior Technical Architect in Oracle's Server Technology Division. Tom is the Tom behind the AskTom column in Oracle Magazine and is also the author of Expert Oracle Database Architecture (Apress, 2005/2009) among other books Abstract: Big Data The term "big data" draws a lot of attention, but behind the hype there's a simple story. For decades, companies have been making business decisions based on transactional data stored in relational databases. However, beyond that critical data is a potential treasure trove of less structured data: weblogs, social media, email, sensors, and photographs that can be mined for useful information. This presentation will take a look at what Big Data is and means - and Oracle's strategy for handling it Abstract: What are we still doing wrong? I've given many best practices presentations in the last 10 years. I've given many worst practices presentations in the last 10 years. I've seen some things change over the last ten years and many other things stay exactly the same. In this talk - we'll be taking a look at the good and the bad - what we do right and what we continue to do wrong over and over again. We'll look at why "Why" is probably the right initial answer to most any question. We'll look at how we get to "Know what we Know", and why that can be both a help and a hindrance. We'll peek at "Best Practices" and tie them into what I term "Worst Practices". In short, a talk on the good and the bad. Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif";} http://ioug.itconvergence.com/pls/apex/f?p=207:27:3669516430980563::NO September 12, 2012- New York, NY NYOUG Fall General Meeting “Trends in Database Administration and Why the Future of Database Administration is the Vdba” http://www.nyoug.org/upcoming_events.htm#General_Meeting1 September 21, 2012 – Cleveland, OH Oracle Database 11g for Developers: What You need to know or Oracle Database 11g New Features for Developers Attendees are introduced to the new and improved features of Oracle 11g (both Oracle 11g R1 and Oracle 11g R2) that directly impact application development. Special emphasis is placed on features that reduce development time, make development simpler, improve performance, or speed deployment. Specific topics include: New SQL functions, virtual columns, result caching, XML improvements, pivot statements, JDBC improvements, and PL/SQL enhancements such as compound triggers. http://www.neooug.org/ September 24, 2012 – Ottawa, ON Introduction to Oracle Spatial The free Oracle Locator functionality, and the Oracle Spatial option which dramatically extends Locator, are very useful, but poorly understood capabilities of the database. In the afternoon we will extend into additional areas selected from: storage and performance; answering business problems with spatial queries; using Oracle Maps in OBIEE; an overview and capabilities of Oracle Topology; under the covers with GeoCoding. Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif";} http://www.oug-ottawa.org/pls/htmldb/f?p=327:27:4209274028390246::NO

  Read the article

• User Guide to Dropbox Shared Folders

  - by Matthew Guay

  Dropbox is an incredibly useful tool for keeping all your files synced between your computers and the cloud.  Here we’re going to look at how you can keep all of your team on the same page with Dropbox shared folders. Creating a Shared Folder Setting up a shared folder in Dropbox is easy.  Add the files you want to share to a folder in Dropbox on your computer, then right-click in the folder, select Dropbox, and then choose Share This Folder.   Alternately, log into your Dropbox account online, click the drop-down menu beside the folder you want to share, and click Share this folder. Now, enter the email addresses of the people you want to share the folder with, and optionally enter a message explaining why you’re sharing the folder. The people you invite will receive an email inviting them to view and join the shared folder.  If they haven’t signed up for Dropbox, they can directly signup; otherwise, they can simply log into their Dropbox account and start adding or editing files. Shared folders have a slightly different icon in your Dropbox.  Notice the shared folder on the left has an icon with 2 people, while the folder on the right that is not shared, shows previews of its contents. See Your Shared Folder’s History Whenever your collaborators with your shared folders add or change files, you will see a tooltip notification telling you what changed. You can also view the changes online.  Log into your Dropbox account in your browser and select the Events tab.  This shows all changes to your Dropbox, but you can view only the changes in your shared folder by selecting its name on the left sidebar. Now you can see all recent changes to your folder, and can also see who added or removed each file.   On the bottom of the page, you can even add a comment that all the collaborators will see. If someone deleted a file you still need, you can restore it by clicking its link in this online history.  Or, you can view any deleted files by right-clicking in your Dropbox folder in Explorer.  Select Dropbox, and then click Show Deleted Files.   Get Notified When a Change is Made You’re not always in front of your computer; you’ve got a life beyond your projects, after all (at least hopefully).  If you really want to stay connected to what’s happening with your project, though, you can easily do that no matter where you are. Your shared Dropbox folder’s history page offers an RSS feed of all changes to the folder.  Click  the Subscribe to this feed hyperlink. Now, in the popup that opens, click “Copy to clipboard” so you can use this RSS feed. You can subscribe to RSS feeds through many web browsers, email clients, dedicated feed readers, and more.  In Firefox, Internet Explorer 7/8, or Opera, you can paste the feed address into your address bar and subscribe to the feed directly in your browser.   However, subscribing to the feed in a desktop application won’t help you much when you’re away from your computer.  One great option is to subscribe in the popular Google Reader.  Then you can check your feed from any browser, on any computer or mobile device. To add your Dropbox feed to Google Reader, log into Google Reader (link below), click Add a subscription on the top left, paste your RSS feed from Dropbox, and click Add.   Now you can see any changes to files or folders in Google Reader. You can even add your feed to your iGoogle homepage.  Click the Add it Now button on the right in the front page of Google Reader to add your feeds to iGoogle.   Now you can see updates on your files from your homepage.  If you’re using a different computer, just login to your Google account to see what’s happening. You can also access your Google Reader feeds from many programs and apps for most major Smartphones including iPhone, Windows Phone, and Blackberry. Receive a Tweet or Text When Changes are Made If you’re a hyper-connected individual, chances are you send and receive tweets on the go.  If so, this might be the best way for you to get notified when changes are made to your Dropbox shared folder.  To do this, first create a new Twitter account to publish your changes through.  If you don’t want the whole world to see your updates, click Settings and set your new Twitter account to Private. Once the new account is created, follow it with your normal Twitter account so you’ll see updates. Now, let’s publish our Dropbox RSS feed to Twitter.  Create an account with Twitterfeed (link below). Once your account is setup, add your feed to it.  Name your feed, and enter your Feed address from Dropbox.  Click Advanced Settings to make your feed work just like you want. In Advanced Settings, change the frequency to “Every 30 mins” to make sure you’re updated on changes as quick as possible.  You can also change other settings if you like. Click “Continue to Step 2”, and then click Twitter under the available services to add your account. Make sure your signed into your new Twitter account, and then click Authenticate Twitter. Allow the application. Now, finally, click Create Service. Whenever a change is made, you will receive a tweet via your new Twitter account.  And since you can receive tweets via text message or many mobile applications, you’ll never be very far away from your Dropbox changes!   Conclusion Dropbox shared folders are a great way to keep your whole team working together on the same files in a project.  And with these handy tricks, you can keep up with your shared files wherever you are! There are a lot of cool things you can do with Dropbox make sure to check out our posts on adding Dropbox to the Windows 7 Start menu, Accessing Dropbox files from Chrome, and Syncing your Pidgin Profile Across Multiple PCs. Links Signup or access your Dropbox account Google Reader Tweet your feed with Twitterfeed Similar Articles Productive Geek Tips How to Add and Manage Shared Folders on Windows Home ServerManage User Accounts in Windows Home ServerAdd "My Dropbox" to Your Windows 7 Start MenuComplete Guide to Networking Windows 7 with XP and VistaMoving Your Personal Data Folders in Windows Vista the Easy Way TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Office 2010 reviewed in depth by Ed Bott FoxClocks adds World Times in your Statusbar (Firefox) Have Fun Editing Photo Editing with Citrify Outlook Connector Upgrade Error Gadfly is a cool Twitter/Silverlight app Enable DreamScene in Windows 7

  Read the article

• Oracle @ E20 Conference Boston - Building Social Business

  - by Michael Snow

  12.00 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-family:"Calibri","sans-serif"; mso-ascii- mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi- mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Oracle WebCenter is The Engagement Platform Powering Exceptional Experiences for Employees, Partners and Customers &amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;&amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;lt;span id=&amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;quot;XinhaEditingPostion&amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;quot;&amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;gt;&amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;lt;/span&amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;gt;lt;p&amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;gt; &amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;lt;/p&amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;gt; The way we work is changing rapidly, offering an enormous competitive advantage to those who embrace the new tools that enable contextual, agile and simplified information exchange and collaboration to distributed workforces and  networks of partners and customers. As many of you are aware, Enterprise 2.0 is the term for the technologies and business practices that liberate the workforce from the constraints of legacy communication and productivity tools like email. It provides business managers with access to the right information at the right time through a web of inter-connected applications, services and devices. Enterprise 2.0 makes accessible the collective intelligence of many, translating to a huge  competitive advantage in the form of increased innovation, productivity and agility.The Enterprise 2.0 Conference takes a strategic perspective, emphasizing the bigger picture implications of the technology and the exploration of what is at stake for organizations trying to change not only tools, but also culture and process. Beyond discussion of the "why", there will also be in-depth opportunities for learning the "how" that will help you bring Enterprise 2.0 to your business. You won't want to miss this opportunity to learn and hear from leading experts in the fields of technology for business, collaboration, culture change and collective intelligence.Oracle was a proud Gold sponsor of the Enterprise 2.0 Conference, taking place this past week in Boston. For those of you that weren't able to make it - we've made the Oracle Social Network Presentation session available here and have posted the slides below. 12.00 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-family:"Calibri","sans-serif"; mso-ascii- mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi- mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} 12.00 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-family:"Calibri","sans-serif"; mso-ascii- mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi- mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} The following is intended to outline our general product direction. It is intended for information purposes only, and may not be incorporated into any contract. It is not a commitment to deliver any material, code, or functionality, and should not be relied upon in making purchasing decisions. The development, release, and timing of any features or functionality described for Oracle’s products remains at the sole discretion of Oracle. 12.00 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

  Read the article

• Is RTD Stateless or Stateful?

  - by [email protected]

  Yes.   A stateless service is one where each request is an independent transaction that can be processed by any of the servers in a cluster.  A stateful service is one where state is kept in a server's memory from transaction to transaction, thus necessitating the proper routing of requests to the right server. The main advantage of stateless systems is simplicity of design. The main advantage of stateful systems is performance. I'm often asked whether RTD is a stateless or stateful service, so I wanted to clarify this issue in depth so that RTD's architecture will be properly understood. The short answer is: "RTD can be configured as a stateless or stateful service." The performance difference between stateless and stateful systems can be very significant, and while in a call center implementation it may be reasonable to use a pure stateless configuration, a web implementation that produces thousands of requests per second is practically impossible with a stateless configuration. RTD's performance is orders of magnitude better than most competing systems. RTD was architected from the ground up to achieve this performance. Features like automatic and dynamic compression of prediction models, automatic translation of metadata to machine code, lack of interpreted languages, and separation of model building from decisioning contribute to achieving this performance level. Because  of this focus on performance we decided to have RTD's default configuration work in a stateful manner. By being stateful RTD requests are typically handled in a few milliseconds when repeated requests come to the same session. Now, those readers that have participated in implementations of RTD know that RTD's architecture is also focused on reducing Total Cost of Ownership (TCO) with features like automatic model building, automatic time windows, automatic maintenance of database tables, automatic evaluation of data mining models, automatic management of models partitioned by channel, geography, etcetera, and hot swapping of configurations. How do you reconcile the need for a low TCO and the need for performance? How do you get the performance of a stateful system with the simplicity of a stateless system? The answer is that you make the system behave like a stateless system to the exterior, but you let it automatically take advantage of situations where being stateful is better. For example, one of the advantages of stateless systems is that you can route a message to any server in a cluster, without worrying about sending it to the same server that was handling the session in previous messages. With an RTD stateful configuration you can still route the message to any server in the cluster, so from the point of view of the configuration of other systems, it is the same as a stateless service. The difference though comes in performance, because if the message arrives to the right server, RTD can serve it without any external access to the session's state, thus tremendously reducing processing time. In typical implementations it is not rare to have high percentages of messages routed directly to the right server, while those that are not, are easily handled by forwarding the messages to the right server. This architecture usually provides the best of both worlds with performance and simplicity of configuration.   Configuring RTD as a pure stateless service A pure stateless configuration requires session data to be persisted at the end of handling each and every message and reloading that data at the beginning of handling any new message. This is of course, the root of the inefficiency of these configurations. This is also the reason why many "stateless" implementations actually do keep state to take advantage of a request coming back to the same server. Nevertheless, if the implementation requires a pure stateless decision service, this is easy to configure in RTD. The way to do it is: Mark every Integration Point to Close the session at the end of processing the message In the Session entity persist the session data on closing the session In the session entity check if a persisted version exists and load it An excellent solution for persisting the session data is Oracle Coherence, which provides a high performance, distributed cache that minimizes the performance impact of persisting and reloading the session. Alternatively, the session can be persisted to a local database. An interesting feature of the RTD stateless configuration is that it can cope with serializing concurrent requests for the same session. For example, if a web page produces two requests to the decision service, these requests could come concurrently to the decision services and be handled by different servers. Most stateless implementation would have the two requests step onto each other when saving the state, or fail one of the messages. When properly configured, RTD will make one message wait for the other before processing.   A Word on Context Using the context of a customer interaction typically significantly increases lift. For example, offer success in a call center could double if the context of the call is taken into account. For this reason, it is important to utilize the contextual information in decision making. To make the contextual information available throughout a session it needs to be persisted. When there is a well defined owner for the information then there is no problem because in case of a session restart, the information can be easily retrieved. If there is no official owner of the information, then RTD can be configured to persist this information.   Once again, RTD provides flexibility to ensure high performance when it is adequate to allow for some loss of state in the rare cases of server failure. For example, in a heavy use web site that serves 1000 pages per second the navigation history may be stored in the in memory session. In such sites it is typical that there is no OLTP that stores all the navigation events, therefore if an RTD server were to fail, it would be possible for the navigation to that point to be lost (note that a new session would be immediately established in one of the other servers). In most cases the loss of this navigation information would be acceptable as it would happen rarely. If it is desired to save this information, RTD would persist it every time the visitor navigates to a new page. Note that this practice is preferred whether RTD is configured in a stateless or stateful manner.  

  Read the article

• NVIDIA x server - "sudo nvidia config" does not generate a working 'xorg.config'

  - by Mike

  I am over 18 hours deep on this challenge. I got to this point and am stuck. very stuck. Maybe you can figure it out? Ubuntu Version 12.04 LTS with all the updates installed. Problem: The default settings in "etc/X11/xorg.conf" that are generated by the "nvidia-xconfig" tool, do not allow the NVIDIA x server to connect to the driver in my "System Settings Additional Driver window". (that's how I understand it. Lots of information below). Symptoms of Problem "System Settings Additional Driver" window has drivers, but the nvidia x server cannot connect/utilize any of the 4 drivers. the drivers are activated, but not in use. When I go to "System Tools Administration NVIDIA x server settings" I get an error that basically tells me to create a default file to initialize the NVIDIA X server (screen shot below). This is the messages the terminal gives after running a "sudo nvidia-xconfig" command for the first time. It seems that the generated file by the tool i just ran is generating a bad/unusable file: If I run the "sudo nvidia-xconfig" command again, I wont get an error the second time. However when I reboot, the default file that is generated (etc/X11/xorg.conf) simply puts the screen resolution at 800 x 600 (or something big like that). When I try to go to NVIDIA x server settings I am greeted with the same screen as the screen shot as in symptom 2 (no option to change the resolution). If I try to go to "system settings display" there are no other resolutions to choose from. At this point I must delete the newly minted "xorg.conf" and reinstate the original in its place. Here are the contents of the "xorg.conf" that is generated first (the one missing required information): # nvidia-xconfig: X configuration file generated by nvidia-xconfig # nvidia-xconfig: version 304.88 (buildmeister@swio-display-x86-rhel47-06) Wed Mar 27 15:32:58 PDT 2013 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "Unknown" HorizSync 28.0 - 33.0 VertRefresh 43.0 - 72.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 SubSection "Display" Depth 24 EndSubSection EndSection Hardware: I ran the "lspci|grep VGA". There results are: 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 01:00.0 VGA compatible controller: NVIDIA Corporation GF108 [Quadro 1000M] (rev a1) More Hardware info: Ram: 16GB CPU: Intel Core i7-2720QM @2.2GHz * 8 Other: 64 bit. This is a triple boot computer and not a VM. Attempts With Not Success on My End: 1) Tried to append the "xorg.conf" with what I perceive is missing information and obviously it didn't fly. 2) All the other stuff I tried got me to this point. 3) See if this link is helpful to you (I barely get it, but i get enough knowing that a smarter person might find this useful): http://manpages.ubuntu.com/manpages/lucid/man1/nvidia-xconfig.1.html 4) I am completely new to Linux (40 hours over past week), but not to programming. However I am very serious about changing over to Linux. When you respond (I hope someone responds...) please respond in a way that a person new to Linux can understand. 5) By the way, the reason I am in this mess is because I MUST have a second monitor running from my laptop, and "System Settings Display" doesn't recognize my second display. I know it is possible to make the second display work in my system, because when I boot from the install CD, I perform work on the native laptop monitor, but the second monitor shows a purple screen with Ubuntu in the middle, so I know the VGA port is sending a signal out. If this is too much for you to tackle please suggest an alternative method to get a second display. I don't want to go to windows but I cannot have a single display. I am really fudged here. I hope some smart person can help. Thanks in advance. Mike. **********************EDIT #1********************** More Details About Graphics Card I was asked "which brand of nvidia-card do you have exactly?" Here is what I did to provide more info (maybe relevant, maybe not, but here is everything): 1) Took my Lenovo W520 right apart to see if there is an identifier on the actual card. However I realized that if I get deep enough to take a look, the laptop "won't like it". so I put it back together. Figuring out the card this way is not an option for me right now. 2) (My computer is triple boot) I logged into Win7 and ran 'dxdiag' command. here is the screen shot: 3) I tried to look on the lenovo website for more details... but no luck. I took a look at my receipts and here is info form receipt: System Unit: W520 NVIDIA Quadro 1000M 2GB 4) In win7 I went to the NVIDIA website and used the option to have my card 'scanned' by a Java applet to determine the latest update for my card. I tried the same with Ubuntu but I can't get the applet to run. Here is the recommended driver from from the NVIDIA Applet for my card for Win7 (I hope this shines some light on the specifics of the card): Quadro/NVS/Tesla/GRID Desktop Driver Release R319 Version: 320.00 WHQL Release Date: 3.5.2013 5) Also I went on the NVIDIA driver search and looked through every possible combination of product type + product series + product to find all the combinations that yield a 1000M card. My card is: Product Type: Quadro Product Series: Quadro Series (Notebooks) Product: 1000M ***********************EDIT #2******************* Additional Symptoms Another question that generated more symptoms I previously didn't mention was: "After generating xorg.conf by nvidia-xconfig, go to additional drivers, do you see nvidia-304?" 1) I took a screen shot of the "additional drivers" right after generating xorg.conf by nvidia-xconfig. Here it is: 2) Then I did a reboot. Now Ubuntu is 600 x 800 resolution. When I logged in after the computer came up I got an error (which I always get after generating xorg.conf by nvidia-xconfig and rebooting) 3) To finally answer the question - No. There is no "NVIDIA-304" driver. Screen shot of additional drivers after generating xorg.conf by nvidia-xconfig and rebooting : At this point I revert to the original xorg.conf and delete the xorg.conf generated by Nvidia.

  Read the article

• Given an XML which contains a representation of a graph, how to apply it DFS algorithm? [on hold]

  - by winston smith

  Given the followin XML which is a directed graph: <?xml version="1.0" encoding="iso-8859-1" ?> <!DOCTYPE graph PUBLIC "-//FC//DTD red//EN" "../dtd/graph.dtd"> <graph direct="1"> <vertex label="V0"/> <vertex label="V1"/> <vertex label="V2"/> <vertex label="V3"/> <vertex label="V4"/> <vertex label="V5"/> <edge source="V0" target="V1" weight="1"/> <edge source="V0" target="V4" weight="1"/> <edge source="V5" target="V2" weight="1"/> <edge source="V5" target="V4" weight="1"/> <edge source="V1" target="V2" weight="1"/> <edge source="V1" target="V3" weight="1"/> <edge source="V1" target="V4" weight="1"/> <edge source="V2" target="V3" weight="1"/> </graph> With this classes i parsed the graph and give it an adjacency list representation: import java.io.IOException; import java.util.HashSet; import java.util.LinkedList; import java.util.Collection; import java.util.Iterator; import java.util.logging.Level; import java.util.logging.Logger; import practica3.util.Disc; public class ParsingXML { public static void main(String[] args) { try { // TODO code application logic here Collection<Vertex> sources = new HashSet<Vertex>(); LinkedList<String> lines = Disc.readFile("xml/directed.xml"); for (String lin : lines) { int i = Disc.find(lin, "source=\""); String data = ""; if (i > 0 && i < lin.length()) { while (lin.charAt(i + 1) != '"') { data += lin.charAt(i + 1); i++; } Vertex v = new Vertex(); v.setName(data); v.setAdy(new HashSet<Vertex>()); sources.add(v); } } Iterator it = sources.iterator(); while (it.hasNext()) { Vertex ver = (Vertex) it.next(); Collection<Vertex> adyacencias = ver.getAdy(); LinkedList<String> ls = Disc.readFile("xml/graphs.xml"); for (String lin : ls) { int i = Disc.find(lin, "target=\""); String data = ""; if (lin.contains("source=\""+ver.getName())) { Vertex v = new Vertex(); if (i > 0 && i < lin.length()) { while (lin.charAt(i + 1) != '"') { data += lin.charAt(i + 1); i++; } v.setName(data); } i = Disc.find(lin, "weight=\""); data = ""; if (i > 0 && i < lin.length()) { while (lin.charAt(i + 1) != '"') { data += lin.charAt(i + 1); i++; } v.setWeight(Integer.parseInt(data)); } if (v.getName() != null) { adyacencias.add(v); } } } } for (Vertex vert : sources) { System.out.println(vert); System.out.println("adyacencias: " + vert.getAdy()); } } catch (IOException ex) { Logger.getLogger(ParsingXML.class.getName()).log(Level.SEVERE, null, ex); } } } This is another class: import java.util.Collection; import java.util.Objects; public class Vertex { private String name; private int weight; private Collection ady; public Collection getAdy() { return ady; } public void setAdy(Collection adyacencias) { this.ady = adyacencias; } public String getName() { return name; } public void setName(String nombre) { this.name = nombre; } public int getWeight() { return weight; } public void setWeight(int weight) { this.weight = weight; } @Override public int hashCode() { int hash = 7; hash = 43 * hash + Objects.hashCode(this.name); hash = 43 * hash + this.weight; return hash; } @Override public boolean equals(Object obj) { if (obj == null) { return false; } if (getClass() != obj.getClass()) { return false; } final Vertex other = (Vertex) obj; if (!Objects.equals(this.name, other.name)) { return false; } if (this.weight != other.weight) { return false; } return true; } @Override public String toString() { return "Vertice{" + "name=" + name + ", weight=" + weight + '}'; } } And finally: /** * * @author user */ /* -*-jde-*- */ /* <Disc.java> Contains the main argument*/ import java.io.*; import java.util.LinkedList; /** * Lectura y escritura de archivos en listas de cadenas * Ideal para el uso de las clases para gráficas. * * @author Peralta Santa Anna Victor Miguel * @since Julio 2011 */ public class Disc { /** * Metodo para lectura de un archivo * * @param fileName archivo que se va a leer * @return El archivo en representacion de lista de cadenas */ public static LinkedList<String> readFile(String fileName) throws IOException { BufferedReader file = new BufferedReader(new FileReader(fileName)); LinkedList<String> textlist = new LinkedList<String>(); while (file.ready()) { textlist.add(file.readLine().trim()); } file.close(); /* for(String linea:textlist){ if(linea.contains("source")){ //String generado = linea.replaceAll("<\\w+\\s+\"", ""); //System.out.println(generado); } }*/ return textlist; }//readFile public static int find(String linea,String palabra){ int i,j; boolean found = false; for(i=0,j=0;i<linea.length();i++){ if(linea.charAt(i)==palabra.charAt(j)){ j++; if(j==palabra.length()){ found = true; return i; } }else{ continue; } } if(!found){ i= -1; } return i; } /** * Metodo para la escritura de un archivo * * @param fileName archivo que se va a escribir * @param tofile la lista de cadenas que quedaran en el archivo * @param append el bit que dira si se anexa el contenido o se empieza de cero */ public static void writeFile(String fileName, LinkedList<String> tofile, boolean append) throws IOException { FileWriter file = new FileWriter(fileName, append); for (int i = 0; i < tofile.size(); i++) { file.write(tofile.get(i) + "\n"); } file.close(); }//writeFile /** * Metodo para escritura de un archivo * @param msg archivo que se va a escribir * @param tofile la cadena que quedaran en el archivo * @param append el bit que dira si se anexa el contenido o se empieza de cero */ public static void writeFile(String msg, String tofile, boolean append) throws IOException { FileWriter file = new FileWriter(msg, append); file.write(tofile); file.close(); }//writeFile }// I'm stuck on what can be the best way to given an adjacency list representation of the graph how to apply it Depth-first search algorithm. Any idea of how to aproach to complete the task?

  Read the article

• Summit Time!

  - by Ajarn Mark Caldwell

  Boy, how time flies!  I can hardly believe that the 2011 PASS Summit is just one week away.  Maybe it snuck up on me because it’s a few weeks earlier than last year.  Whatever the cause, I am really looking forward to next week.  The PASS Summit is the largest SQL Server conference in the world and a fantastic networking opportunity thrown in for no additional charge.  Here are a few thoughts to help you maximize the week. Networking As Karen Lopez (blog | @DataChick) mentioned in her presentation for the Professional Development Virtual Chapter just a couple of weeks ago, “Don’t wait until you need a new job to start networking.”  You should always be working on your professional network.  Some people, especially technical-minded people, get confused by the term networking.  The first image that used to pop into my head was the image of some guy standing, awkwardly, off to the side of a cocktail party, trying to shmooze those around him.  That’s not what I’m talking about.  If you’re good at that sort of thing, and you can strike up a conversation with some stranger and learn all about them in 5 minutes, and walk away with your next business deal all but approved by the lawyers, then congratulations.  But if you’re not, and most of us are not, I have two suggestions for you.  First, register for Don Gabor’s 2-hour session on Tuesday at the Summit called Networking to Build Business Contacts.  Don is a master at small talk, and at teaching others, and in just those two short hours will help you with important tips about breaking the ice, remembering names, and smooth transitions into and out of conversations.  Then go put that great training to work right away at the Tuesday night Welcome Reception and meet some new people; which is really my second suggestion…just meet a few new people.  You see, “networking” is about meeting new people and being friendly without trying to “work it” to get something out of the relationship at this point.  In fact, Don will tell you that a better way to build the connection with someone is to look for some way that you can help them, not how they can help you. There are a ton of opportunities as long as you follow this one key point: Don’t stay in your hotel!  At the least, get out and go to the free events such as the Tuesday night Welcome Reception, the Wednesday night Exhibitor Reception, and the Thursday night Community Appreciation Party.  All three of these are perfect opportunities to meet other professionals with a similar job or interest as you, and you never know how that may help you out in the future.  Maybe you just meet someone to say HI to at breakfast the next day instead of eating alone.  Or maybe you cross paths several times throughout the Summit and compare notes on different sessions you attended.  And you just might make new friends that you look forward to seeing year after year at the Summit.  Who knows, it might even turn out that you have some specific experience that will help out that other person a few months’ from now when they run into the same challenge that you just overcame, or vice-versa.  But the point is, if you don’t get out and meet people, you’ll never have the chance for anything else to happen in the future. One more tip for shy attendees of the Summit…if you can’t bring yourself to strike up conversation with strangers at these events, then at the least, after you sit through a good session that helps you out, go up to the speaker and introduce yourself and thank them for taking the time and effort to put together their presentation.  Ideally, when you do this, tell them WHY it was beneficial to you (e.g. “Now I have a new idea of how to tackle a problem back at the office.”)  I know you think the speakers are all full of confidence and are always receiving a ton of accolades and applause, but you’re wrong.  Most of them will be very happy to hear first-hand that all the work they put into getting ready for their presentation is paying off for somebody. Training With over 170 technical sessions at the Summit, training is what it’s all about, and the training is fantastic!  Of course there are the big-name trainers like Paul Randall, Kimberly Tripp, Kalen Delaney, Itzik Ben-Gan and several others, but I am always impressed by the quality of the training put on by so many other “regular” members of the SQL Server community.  It is amazing how you don’t have to be a published author or otherwise recognized as an “expert” in an area in order to make a big impact on others just by sharing your personal experience and lessons learned.  I would rather hear the story of, and lessons learned from, “some guy or gal” who has actually been through an issue and came out the other side, than I would a trained professor who is speaking just from theory or an intellectual understanding of a topic. In addition to the three full days of regular sessions, there are also two days of pre-conference intensive training available.  There is an extra cost to this, but it is a fantastic opportunity.  Think about it…you’re already coming to this area for training, so why not extend your stay a little bit and get some in-depth training on a particular topic or two?  I did this for the first time last year.  I attended one day of extra training and it was well worth the time and money.  One of the best reasons for it is that I am extremely busy at home with my regular job and family, that it was hard to carve out the time to learn about the topic on my own.  It worked out so well last year that I am doubling up and doing two days or “pre-cons” this year. And then there are the DVDs.  I think these are another great option.  I used the online schedule builder to get ready and have an idea of which sessions I want to attend and when they are (much better than trying to figure this out at the last minute every day).  But the problem that I have run into (seems this happens every year) is that nearly every session block has two different sessions that I would like to attend.  And some of them have three!  ACK!  That won’t work!  What is a guy supposed to do?  Well, one option is to purchase the DVDs which are recordings of the audio and projected images from each session so you can continue to attend sessions long after the Summit is officially over.  Yes, many (possibly all) of these also get posted online and attendees can access those for no extra charge, but those are not necessarily all available as quickly as the DVD recording are, and the DVDs are often more convenient than downloading, especially if you want to share the training with someone who was not able to attend in person. Remember, I don’t make any money or get any other benefit if you buy the DVDs or from anything else that I have recommended here.  These are just my own thoughts, trying to help out based on my experiences from the 8 or so Summits I have attended.  There is nothing like the Summit.  It is an awesome experience, fantastic training, and a whole lot of fun which is just compounded if you’ll take advantage of the first part of this article and make some new friends along the way.

  Read the article

• Fraud Detection with the SQL Server Suite Part 2

  - by Dejan Sarka

  This is the second part of the fraud detection whitepaper. You can find the first part in my previous blog post about this topic. My Approach to Data Mining Projects It is impossible to evaluate the time and money needed for a complete fraud detection infrastructure in advance. Personally, I do not know the customer’s data in advance. I don’t know whether there is already an existing infrastructure, like a data warehouse, in place, or whether we would need to build one from scratch. Therefore, I always suggest to start with a proof-of-concept (POC) project. A POC takes something between 5 and 10 working days, and involves personnel from the customer’s site – either employees or outsourced consultants. The team should include a subject matter expert (SME) and at least one information technology (IT) expert. The SME must be familiar with both the domain in question as well as the meaning of data at hand, while the IT expert should be familiar with the structure of data, how to access it, and have some programming (preferably Transact-SQL) knowledge. With more than one IT expert the most time consuming work, namely data preparation and overview, can be completed sooner. I assume that the relevant data is already extracted and available at the very beginning of the POC project. If a customer wants to have their people involved in the project directly and requests the transfer of knowledge, the project begins with training. I strongly advise this approach as it offers the establishment of a common background for all people involved, the understanding of how the algorithms work and the understanding of how the results should be interpreted, a way of becoming familiar with the SQL Server suite, and more. Once the data has been extracted, the customer’s SME (i.e. the analyst), and the IT expert assigned to the project will learn how to prepare the data in an efficient manner. Together with me, knowledge and expertise allow us to focus immediately on the most interesting attributes and identify any additional, calculated, ones soon after. By employing our programming knowledge, we can, for example, prepare tens of derived variables, detect outliers, identify the relationships between pairs of input variables, and more, in only two or three days, depending on the quantity and the quality of input data. I favor the customer’s decision of assigning additional personnel to the project. For example, I actually prefer to work with two teams simultaneously. I demonstrate and explain the subject matter by applying techniques directly on the data managed by each team, and then both teams continue to work on the data overview and data preparation under our supervision. I explain to the teams what kind of results we expect, the reasons why they are needed, and how to achieve them. Afterwards we review and explain the results, and continue with new instructions, until we resolve all known problems. Simultaneously with the data preparation the data overview is performed. The logic behind this task is the same – again I show to the teams involved the expected results, how to achieve them and what they mean. This is also done in multiple cycles as is the case with data preparation, because, quite frankly, both tasks are completely interleaved. A specific objective of the data overview is of principal importance – it is represented by a simple star schema and a simple OLAP cube that will first of all simplify data discovery and interpretation of the results, and will also prove useful in the following tasks. The presence of the customer’s SME is the key to resolving possible issues with the actual meaning of the data. We can always replace the IT part of the team with another database developer; however, we cannot conduct this kind of a project without the customer’s SME. After the data preparation and when the data overview is available, we begin the scientific part of the project. I assist the team in developing a variety of models, and in interpreting the results. The results are presented graphically, in an intuitive way. While it is possible to interpret the results on the fly, a much more appropriate alternative is possible if the initial training was also performed, because it allows the customer’s personnel to interpret the results by themselves, with only some guidance from me. The models are evaluated immediately by using several different techniques. One of the techniques includes evaluation over time, where we use an OLAP cube. After evaluating the models, we select the most appropriate model to be deployed for a production test; this allows the team to understand the deployment process. There are many possibilities of deploying data mining models into production; at the POC stage, we select the one that can be completed quickly. Typically, this means that we add the mining model as an additional dimension to an existing DW or OLAP cube, or to the OLAP cube developed during the data overview phase. Finally, we spend some time presenting the results of the POC project to the stakeholders and managers. Even from a POC, the customer will receive lots of benefits, all at the sole risk of spending money and time for a single 5 to 10 day project: The customer learns the basic patterns of frauds and fraud detection The customer learns how to do the entire cycle with their own people, only relying on me for the most complex problems The customer’s analysts learn how to perform much more in-depth analyses than they ever thought possible The customer’s IT experts learn how to perform data extraction and preparation much more efficiently than they did before All of the attendees of this training learn how to use their own creativity to implement further improvements of the process and procedures, even after the solution has been deployed to production The POC output for a smaller company or for a subsidiary of a larger company can actually be considered a finished, production-ready solution It is possible to utilize the results of the POC project at subsidiary level, as a finished POC project for the entire enterprise Typically, the project results in several important “side effects” Improved data quality Improved employee job satisfaction, as they are able to proactively contribute to the central knowledge about fraud patterns in the organization Because eventually more minds get to be involved in the enterprise, the company should expect more and better fraud detection patterns After the POC project is completed as described above, the actual project would not need months of engagement from my side. This is possible due to our preference to transfer the knowledge onto the customer’s employees: typically, the customer will use the results of the POC project for some time, and only engage me again to complete the project, or to ask for additional expertise if the complexity of the problem increases significantly. I usually expect to perform the following tasks: Establish the final infrastructure to measure the efficiency of the deployed models Deploy the models in additional scenarios Through reports By including Data Mining Extensions (DMX) queries in OLTP applications to support real-time early warnings Include data mining models as dimensions in OLAP cubes, if this was not done already during the POC project Create smart ETL applications that divert suspicious data for immediate or later inspection I would also offer to investigate how the outcome could be transferred automatically to the central system; for instance, if the POC project was performed in a subsidiary whereas a central system is available as well Of course, for the actual project, I would repeat the data and model preparation as needed It is virtually impossible to tell in advance how much time the deployment would take, before we decide together with customer what exactly the deployment process should cover. Without considering the deployment part, and with the POC project conducted as suggested above (including the transfer of knowledge), the actual project should still only take additional 5 to 10 days. The approximate timeline for the POC project is, as follows: 1-2 days of training 2-3 days for data preparation and data overview 2 days for creating and evaluating the models 1 day for initial preparation of the continuous learning infrastructure 1 day for presentation of the results and discussion of further actions Quite frequently I receive the following question: are we going to find the best possible model during the POC project, or during the actual project? My answer is always quite simple: I do not know. Maybe, if we would spend just one hour more for data preparation, or create just one more model, we could get better patterns and predictions. However, we simply must stop somewhere, and the best possible way to do this, according to my experience, is to restrict the time spent on the project in advance, after an agreement with the customer. You must also never forget that, because we build the complete learning infrastructure and transfer the knowledge, the customer will be capable of doing further investigations independently and improve the models and predictions over time without the need for a constant engagement with me.

  Read the article

• T4 Performance Counters explained

  - by user13346607

  Now that T4 is out for a few month some people might have wondered what details of the new pipeline you can monitor. A "cpustat -h" lists a lot of events that can be monitored, and only very few are self-explanatory. I will try to give some insight on all of them, some of these "PIC events" require an in-depth knowledge of T4 pipeline. Over time I will try to explain these, for the time being these events should simply be ignored. (Side note: some counters changed from tape-out 1.1 (*only* used in the T4 beta program) to tape-out 1.2 (used in the systems shipping today) The table only lists the tape-out 1.2 counters) 0 0 1 1058 6033 Oracle Microelectronics 50 14 7077 14.0 Normal 0 false false false EN-US JA X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:12.0pt; font-family:Cambria; mso-ascii-font-family:Cambria; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Cambria; mso-hansi-theme-font:minor-latin;} pic name (cpustat) Prose Comment Sel-pipe-drain-cycles, Sel-0-[wait|ready], Sel-[1,2] Sel-0-wait counts cycles a strand waits to be selected. Some reasons can be counted in detail; these are: Sel-0-ready: Cycles a strand was ready but not selected, that can signal pipeline oversubscription Sel-1: Cycles only one instruction or µop was selected Sel-2: Cycles two instructions or µops were selected Sel-pipe-drain-cycles: cf. PRM footnote 8 to table 10.2 Pick-any, Pick-[0|1|2|3] Cycles one, two, three, no or at least one instruction or µop is picked Instr_FGU_crypto Number of FGU or crypto instructions executed on that vcpu Instr_ld dto. for load Instr_st dto. for store SPR_ring_ops dto. for SPR ring ops Instr_other dto. for all other instructions not listed above, PRM footnote 7 to table 10.2 lists the instructions Instr_all total number of instructions executed on that vcpu Sw_count_intr Nr of S/W count instructions on that vcpu (sethi %hi(fc000),%g0 (whatever that is))  Atomics nr of atomic ops, which are LDSTUB/a, CASA/XA, and SWAP/A SW_prefetch Nr of PREFETCH or PREFETCHA instructions Block_ld_st Block loads or store on that vcpu IC_miss_nospec, IC_miss_[L2_or_L3|local|remote]\ _hit_nospec Various I$ misses, distinguished by where they hit. All of these count per thread, but only primary events: T4 counts only the first occurence of an I$ miss on a core for a certain instruction. If one strand misses in I$ this miss is counted, but if a second strand on the same core misses while the first miss is being resolved, that second miss is not counted This flavour of I$ misses counts only misses that are caused by instruction that really commit (note the "_nospec") BTC_miss Branch target cache miss ITLB_miss ITLB misses (synchronously counted) ITLB_miss_asynch dto. but asynchronously [I|D]TLB_fill_\ [8KB|64KB|4MB|256MB|2GB|trap] H/W tablewalk events that fill ITLB or DTLB with translation for the corresponding page size. The “_trap” event occurs if the HWTW was not able to fill the corresponding TLB IC_mtag_miss, IC_mtag_miss_\ [ptag_hit|ptag_miss|\ ptag_hit_way_mismatch] I$ micro tag misses, with some options for drill down Fetch-0, Fetch-0-all fetch-0 counts nr of cycles nothing was fetched for this particular strand, fetch-0-all counts cycles nothing was fetched for all strands on a core Instr_buffer_full Cycles the instruction buffer for a strand was full, thereby preventing any fetch BTC_targ_incorrect Counts all occurences of wrongly predicted branch targets from the BTC [PQ|ROB|LB|ROB_LB|SB|\ ROB_SB|LB_SB|RB_LB_SB|\ DTLB_miss]\ _tag_wait ST_q_tag_wait is listed under sl=20. These counters monitor pipeline behaviour therefore they are not strand specific: PQ_...: cycles Rename stage waits for a Pick Queue tag (might signal memory bound workload for single thread mode, cf. Mail from Richard Smith) ROB_...: cycles Select stage waits for a ROB (ReOrderBuffer) tag LB_...: cycles Select stage waits for a Load Buffer tag SB_...: cycles Select stage waits for Store Buffer tag combinations of the above are allowed, although some of these events can overlap, the counter will only be incremented once per cycle if any of these occur DTLB_...: cycles load or store instructions wait at Pick stage for a DTLB miss tag [ID]TLB_HWTW_\ [L2_hit|L3_hit|L3_miss|all] Counters for HWTW accesses caused by either DTLB or ITLB misses. Canbe further detailed by where they hit IC_miss_L2_L3_hit, IC_miss_local_remote_remL3_hit, IC_miss I$ prefetches that were dropped because they either miss in L2$ or L3$ This variant counts misses regardless if the causing instruction commits or not DC_miss_nospec, DC_miss_[L2_L3|local|remote_L3]\ _hit_nospec D$ misses either in general or detailed by where they hit cf. the explanation for the IC_miss in two flavours for an explanation of _nospec and the reasoning for two DC_miss counters DTLB_miss_asynch counts all DTLB misses asynchronously, there is no way to count them synchronously DC_pref_drop_DC_hit, SW_pref_drop_[DC_hit|buffer_full] L1-D$ h/w prefetches that were dropped because of a D$ hit, counted per core. The others count software prefetches per strand [Full|Partial]_RAW_hit_st_[buf|q] Count events where a load wants to get data that has not yet been stored, i. e. it is still inside the pipeline. The data might be either still in the store buffer or in the store queue. If the load's data matches in the SB and in the store queue the data in buffer takes precedence of course since it is younger [IC|DC]_evict_invalid, [IC|DC|L1]_snoop_invalid, [IC|DC|L1]_invalid_all Counter for invalidated cache evictions per core St_q_tag_wait Number of cycles pipeline waits for a store queue tag, of course counted per core Data_pref_[drop_L2|drop_L3|\ hit_L2|hit_L3|\ hit_local|hit_remote] Data prefetches that can be further detailed by either why they were dropped or where they did hit St_hit_[L2|L3], St_L2_[local|remote]_C2C, St_local, St_remote Store events distinguished by where they hit or where they cause a L2 cache-to-cache transfer, i.e. either a transfer from another L2$ on the same die or from a different die DC_miss, DC_miss_\ [L2_L3|local|remote]_hit D$ misses either in general or detailed by where they hit cf. the explanation for the IC_miss in two flavours for an explanation of _nospec and the reasoning for two DC_miss counters L2_[clean|dirty]_evict Per core clean or dirty L2$ evictions L2_fill_buf_full, L2_wb_buf_full, L2_miss_buf_full Per core L2$ buffer events, all count number of cycles that this state was present L2_pipe_stall Per core cycles pipeline stalled because of L2$ Branches Count branches (Tcc, DONE, RETRY, and SIT are not counted as branches) Br_taken Counts taken branches (Tcc, DONE, RETRY, and SIT are not counted as branches) Br_mispred, Br_dir_mispred, Br_trg_mispred, Br_trg_mispred_\ [far_tbl|indir_tbl|ret_stk] Counter for various branch misprediction events.  Cycles_user counts cycles, attribute setting hpriv, nouser, sys controls addess space to count in Commit-[0|1|2], Commit-0-all, Commit-1-or-2 Number of times either no, one, or two µops commit for a strand. Commit-0-all counts number of times no µop commits for the whole core, cf. footnote 11 to table 10.2 in PRM for a more detailed explanation on how this counters interacts with the privilege levels

  Read the article

• Thoughts on Build 2013

  - by D'Arcy Lussier

  Originally posted on: http://geekswithblogs.net/dlussier/archive/2013/06/30/153294.aspxAnd so another Build conference has come to an end. Below are my thoughts/perspectives on various aspects of the event. I’ll do a separate blog post on my thoughts of the Build message for developers. The Good Moscone center was a great venue for Build! Easy to get around, easy to get to, and well maintained, it was a very comfortable conference venue. Yeah, the free swag was nice. Build has built up an expectation that attendees will always get something; it’ll be interesting to see how Microsoft maintains this expectation over the next few Build events. I still maintain that free swag should never be the main reason one attends an event, and for me this was definitely just an added bonus. I’m planning on trying to use the Surface as a dedicated 2nd device at work for meetings, I’ll share my experiences over the next few months. The hackathon event was a great idea, although personally I couldn’t justify spending the money on a conference registration just to spend the entire conference coding. Still, the apps that were created were really great and there was a lot of passion and excitement around the hackathon. I wonder if they couldn’t have had the hackathon on the Monday/Tuesday for those that wanted to participate so they didn’t miss any of the actual conference over Wed/Thurs. San Francisco was a great city to host Build. Getting from hotels to the conference center was very easy (well especially for me, I was only 3 blocks away) and the city itself felt very safe. However, if I never have to fly into SFO again I’ll be alright with that! Delays going into and out of SFO and both apparently were due to the airport itself. The Bad Build is one of those oddities on the conference landscape where people will pay to commit to attending an event without knowing anything about the sessions. We got our list of conference sessions when we registered on Tuesday, not before. And even then, we only got titles and not descriptions (those were eventually made available via the conference’s mobile application). I get it…they’re going to make announcements and they don’t want to give anything away through the session titles. But honestly, there wasn’t anything in the session titles that I would have considered a surprise. Breakfasts were brutal. High-carb pastries, donuts, and muffins with fruit and hard boiled eggs does not a conference breakfast make. I can’t believe that the difference between a continental breakfast per person and a hot breakfast buffet would have been a huge impact to a conference fee that was already around $2000. The vendor area was anemic. I don’t know why Microsoft forces the vendors into cookie-cutter booth areas (this year they were all made of plywood material). WPC, TechEd – booth areas there allow the vendors to be creative with their displays. Not so much for Build. Really odd was the lack of Microsoft’s own representation around Bing. In the day 1 keynote Microsoft made a big deal about Bing as an API. Yet there was nobody in the vendor area set up to provide more information or have discussions with about the Bing API. The Ugly Our name badges were NFC enabled. The purpose of this, beyond the vendors being able to scan your info, wasn’t really made clear. An attendee I talked to showed how you could get a reader app on your phone so you can scan other members cards and collect their contact info – which is a kewl idea; business cards are so 1990’s. But I was *shocked* at the amount of information that was on our name badges! Here’s what’s displayed on our name badge: - Name - Company - Twitter Handle I’m ok with that. But here’s what actually gets read: - Name - Company - Address Used for Registration - Phone Number Used for Registration So sharing that info with another attendee, they get way more of my info than just how to find me on Twitter! Microsoft, you need to fix this for the future. If vendors want to collect information on attendees, they should be able to collect an ID from the badge, then get a report with corresponding records afterwards. My personal information should not be so readily available, and without my knowledge! Final Verdict Maybe its my older age, maybe its where I’m at in life with family, maybe its where I’m at in my career, but when I consider whether a conference experience was valuable I get to the core reason I attend: opportunities to learn, opportunities to network, opportunities to engage with Microsoft. Opportunities to Learn:  Sessions I attended were generally OK, with some really stand out ones on Day 2. I would love to see Microsoft adopt the Dojo format for a portion of their sessions. Hands On Labs are dull, lecture style sessions are great for information sharing. But a guided hands-on coding session (Read: Dojo) provides the best of both worlds. Being that all content is publically available online to everyone (Build attendee or not), the value of attending the conference sessions is decreased. The value though is in the discussions that take part in person afterwards, which leads to… Opportunities to Network: I enjoyed getting together with old friends and connecting with Twitter friends in person for the first time. I also had an opportunity to meet total strangers. So from a networking perspective, Build was fantastic! I still think it would have been great to have an area for ad-hoc discussions – where speakers could announce they’d be available for more questions after their sessions, or attendees who wanted to discuss more in depth on a topic with other attendees could arrange space. Some people have no problems being outgoing and making these things happen, but others are not and a structured model is more attractive. Opportunities to Engage with Microsoft: Hit and miss on this one. Outside of the vendor area, unless you cornered or reached out to a speaker, there wasn’t any defined way to connect with blue badges. And as I mentioned above, Microsoft didn’t have full representation in the vendor area (no Bing). All in all, Build was a fun party where I was informed about some new stuff and got some free swag. Was it worth the time away from home and the hit to my PD budget? I’d say Somewhat. Build is a great informational conference, but I wouldn’t call it a learning conference. Considering that TechEd seems to be moving to more of an IT Pro focus, independent developer conferences seem to be the best value for those looking to learn and not just be informed. With the rapid development cycle Microsoft is embracing, we’re already seeing Build happening twice within a 12 month period. If that continues, the value of attending Build in person starts to diminish – especially with so much content available online. If Microsoft wants Build to be a must-attend event in the future, they need to start incorporating aspects of Tech Ed, past PDCs, and other conferences so those that want to leave with more than free swag have something to attract them.

  Read the article

• Open GL stars are not rendering

  - by Darestium

  I doing Nehe's Open GL Lesson 9. I'm using SFML for windowing, the strange thing is no stars are rendering. #include <SFML/System.hpp> #include <SFML/Window.hpp> #include <SFML/Graphics.hpp> #include <iostream> void processEvents(sf::Window *app); void processInput(sf::Window *app); void renderGlScene(sf::Window *app); void init(); int loadResources(); const int NUM_OF_STARS = 50; float triRot = 0.0f; float quadRot = 0.0f; bool twinkle = false; bool tKey = false; float zoom = 15.0f; float tilt = 90.0f; float spin = 0.0f; unsigned int loop; unsigned int texture_handle[1]; typedef struct { int r, g, b; float distance; float angle; } stars; stars star[NUM_OF_STARS]; int main() { sf::Window app(sf::VideoMode(800, 600, 32), "Nehe Lesson 9"); app.UseVerticalSync(false); init(); if (loadResources() == -1) { return EXIT_FAILURE; } while (app.IsOpened()) { processEvents(&app); processInput(&app); renderGlScene(&app); app.Display(); } return EXIT_SUCCESS; } int loadResources() { sf::Image img_data; // Load Texture if (!img_data.LoadFromFile("data/images/star.bmp")) { std::cout << "Could not load data/images/star.bmp"; return -1; } // Generate 1 texture glGenTextures(1, &texture_handle[0]); // Linear filtering glBindTexture(GL_TEXTURE_2D, texture_handle[0]); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MAG_FILTER, GL_LINEAR); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_LINEAR); glTexImage2D(GL_TEXTURE_2D, 0, GL_RGBA, img_data.GetWidth(), img_data.GetHeight(), 0, GL_RGBA, GL_UNSIGNED_BYTE, img_data.GetPixelsPtr()); return 0; } void processInput(sf::Window *app) { const sf::Input& input = app->GetInput(); if (input.IsKeyDown(sf::Key::T) && !tKey) { tKey = true; twinkle = !twinkle; } if (!input.IsKeyDown(sf::Key::T)) { tKey = false; } if (input.IsKeyDown(sf::Key::Up)) { tilt -= 0.05f; } if (input.IsKeyDown(sf::Key::Down)) { tilt += 0.05f; } if (input.IsKeyDown(sf::Key::PageUp)) { zoom -= 0.02f; } if (input.IsKeyDown(sf::Key::Up)) { zoom += 0.02f; } } void init() { glClearDepth(1.f); glClearColor(0.f, 0.f, 0.f, 0.f); // Enable texturing glEnable(GL_TEXTURE_2D); //glDepthMask(GL_TRUE); // Setup a perpective projection glMatrixMode(GL_PROJECTION); glLoadIdentity(); gluPerspective(45.f, 1.f, 1.f, 500.f); glShadeModel(GL_SMOOTH); glBlendFunc(GL_SRC_ALPHA, GL_ONE); glEnable(GL_BLEND); for (loop = 0; loop < NUM_OF_STARS; loop++) { star[loop].distance = (float)loop / NUM_OF_STARS * 5.0f; // Calculate distance from the centre // Give stars random rgb value star[loop].r = rand() % 256; star[loop].g = rand() % 256; star[loop].b = rand() % 256; } } void processEvents(sf::Window *app) { sf::Event event; while (app->GetEvent(event)) { if (event.Type == sf::Event::Closed) { app->Close(); } if (event.Type == sf::Event::KeyPressed && event.Key.Code == sf::Key::Escape) { app->Close(); } } } void renderGlScene(sf::Window *app) { app->SetActive(); // Clear color depth buffer glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT); // Apply some transformations glMatrixMode(GL_MODELVIEW); glLoadIdentity(); // Select texture glBindTexture(GL_TEXTURE_2D, texture_handle[0]); for (loop = 0; loop < NUM_OF_STARS; loop++) { glLoadIdentity(); // Reset The View Before We Draw Each Star glTranslatef(0.0f, 0.0f, zoom); // Zoom Into The Screen (Using The Value In 'zoom') glRotatef(tilt, 1.0f, 0.0f, 0.0f); // Tilt The View (Using The Value In 'tilt') glRotatef(star[loop].angle, 0.0f, 1.0f, 0.0f); // Rotate To The Current Stars Angle glTranslatef(star[loop].distance, 0.0f, 0.0f); // Move Forward On The X Plane glRotatef(-star[loop].angle,0.0f,1.0f,0.0f); // Cancel The Current Stars Angle glRotatef(-tilt,1.0f,0.0f,0.0f); // Cancel The Screen Tilt if (twinkle) { glColor4ub(star[(NUM_OF_STARS - loop) - 1].r, star[(NUM_OF_STARS - loop)-1].g, star[(NUM_OF_STARS - loop) - 1].b, 255); glBegin(GL_QUADS); // Begin Drawing The Textured Quad glTexCoord2f(0.0f, 0.0f); glVertex3f(-1.0f, -1.0f, 0.0f); glTexCoord2f(1.0f, 0.0f); glVertex3f( 1.0f, -1.0f, 0.0f); glTexCoord2f(1.0f, 1.0f); glVertex3f( 1.0f, 1.0f, 0.0f); glTexCoord2f(0.0f, 1.0f); glVertex3f(-1.0f, 1.0f, 0.0f); glEnd(); // Done Drawing The Textured Quad } glRotatef(spin,0.0f,0.0f,1.0f); // Rotate The Star On The Z Axis // Assign A Color Using Bytes glColor4ub(star[loop].r, star[loop].g, star[loop].b, 255); glBegin(GL_QUADS); // Begin Drawing The Textured Quad glTexCoord2f(0.0f, 0.0f); glVertex3f(-1.0f,-1.0f, 0.0f); glTexCoord2f(1.0f, 0.0f); glVertex3f( 1.0f,-1.0f, 0.0f); glTexCoord2f(1.0f, 1.0f); glVertex3f( 1.0f, 1.0f, 0.0f); glTexCoord2f(0.0f, 1.0f); glVertex3f(-1.0f, 1.0f, 0.0f); glEnd(); // Done Drawing The Textured Quad spin += 0.01f; // Used To Spin The Stars star[loop].angle += (float)loop / NUM_OF_STARS; // Changes The Angle Of A Star star[loop].distance -= 0.01f; // Changes The Distance Of A Star if (star[loop].distance < 0.0f) { star[loop].distance += 5.0f; // Move The Star 5 Units From The Center star[loop].r = rand() % 256; // Give It A New Red Value star[loop].g = rand() % 256; // Give It A New Green Value star[loop].b = rand() % 256; // Give It A New Blue Value } } } I've looked over the code atleast 10 times now and I can't figure out the problem. Any help would be much appreciated.

  Read the article

• RiverTrail - JavaScript GPPGU Data Parallelism

  - by JoshReuben

  Where is WebCL ? The Khronos WebCL working group is working on a JavaScript binding to the OpenCL standard so that HTML 5 compliant browsers can host GPGPU web apps – e.g. for image processing or physics for WebGL games - http://www.khronos.org/webcl/ . While Nokia & Samsung have some protype WebCL APIs, Intel has one-upped them with a higher level of abstraction: RiverTrail. Intro to RiverTrail Intel Labs JavaScript RiverTrail provides GPU accelerated SIMD data-parallelism in web applications via a familiar JavaScript programming paradigm. It extends JavaScript with simple deterministic data-parallel constructs that are translated at runtime into a low-level hardware abstraction layer. With its high-level JS API, programmers do not have to learn a new language or explicitly manage threads, orchestrate shared data synchronization or scheduling. It has been proposed as a draft specification to ECMA a (known as ECMA strawman). RiverTrail runs in all popular browsers (except I.E. of course). To get started, download a prebuilt version https://github.com/downloads/RiverTrail/RiverTrail/rivertrail-0.17.xpi , install Intel's OpenCL SDK http://www.intel.com/go/opencl and try out the interactive River Trail shell http://rivertrail.github.com/interactive For a video overview, see  http://www.youtube.com/watch?v=jueg6zB5XaM . ParallelArray the ParallelArray type is the central component of this API & is a JS object that contains ordered collections of scalars – i.e. multidimensional uniform arrays. A shape property describes the dimensionality and size– e.g. a 2D RGBA image will have shape [height, width, 4]. ParallelArrays are immutable & fluent – they are manipulated by invoking methods on them which produce new ParallelArray objects. ParallelArray supports several constructors over arrays, functions & even the canvas. // Create an empty Parallel Array var pa = new ParallelArray(); // pa0 = <>   // Create a ParallelArray out of a nested JS array. // Note that the inner arrays are also ParallelArrays var pa = new ParallelArray([ [0,1], [2,3], [4,5] ]); // pa1 = <<0,1>, <2,3>, <4.5>>   // Create a two-dimensional ParallelArray with shape [3, 2] using the comprehension constructor var pa = new ParallelArray([3, 2], function(iv){return iv[0] * iv[1];}); // pa7 = <<0,0>, <0,1>, <0,2>>   // Create a ParallelArray from canvas.  This creates a PA with shape [w, h, 4], var pa = new ParallelArray(canvas); // pa8 = CanvasPixelArray   ParallelArray exposes fluent API functions that take an elemental JS function for data manipulation: map, combine, scan, filter, and scatter that return a new ParallelArray. Other functions are scalar - reduce  returns a scalar value & get returns the value located at a given index. The onus is on the developer to ensure that the elemental function does not defeat data parallelization optimization (avoid global var manipulation, recursion). For reduce & scan, order is not guaranteed - the onus is on the dev to provide an elemental function that is commutative and associative so that scan will be deterministic – E.g. Sum is associative, but Avg is not. map Applies a provided elemental function to each element of the source array and stores the result in the corresponding position in the result array. The map method is shape preserving & index free - can not inspect neighboring values. // Adding one to each element. var source = new ParallelArray([1,2,3,4,5]); var plusOne = source.map(function inc(v) {     return v+1; }); //<2,3,4,5,6> combine Combine is similar to map, except an index is provided. This allows elemental functions to access elements from the source array relative to the one at the current index position. While the map method operates on the outermost dimension only, combine, can choose how deep to traverse - it provides a depth argument to specify the number of dimensions it iterates over. The elemental function of combine accesses the source array & the current index within it - element is computed by calling the get method of the source ParallelArray object with index i as argument. It requires more code but is more expressive. var source = new ParallelArray([1,2,3,4,5]); var plusOne = source.combine(function inc(i) { return this.get(i)+1; }); reduce reduces the elements from an array to a single scalar result – e.g. Sum. // Calculate the sum of the elements var source = new ParallelArray([1,2,3,4,5]); var sum = source.reduce(function plus(a,b) { return a+b; }); scan Like reduce, but stores the intermediate results – return a ParallelArray whose ith elements is the results of using the elemental function to reduce the elements between 0 and I in the original ParallelArray. // do a partial sum var source = new ParallelArray([1,2,3,4,5]); var psum = source.scan(function plus(a,b) { return a+b; }); //<1, 3, 6, 10, 15> scatter a reordering function - specify for a certain source index where it should be stored in the result array. An optional conflict function can prevent an exception if two source values are assigned the same position of the result: var source = new ParallelArray([1,2,3,4,5]); var reorder = source.scatter([4,0,3,1,2]); // <2, 4, 5, 3, 1> // if there is a conflict use the max. use 33 as a default value. var reorder = source.scatter([4,0,3,4,2], 33, function max(a, b) {return a>b?a:b; }); //<2, 33, 5, 3, 4> filter // filter out values that are not even var source = new ParallelArray([1,2,3,4,5]); var even = source.filter(function even(iv) { return (this.get(iv) % 2) == 0; }); // <2,4> Flatten used to collapse the outer dimensions of an array into a single dimension. pa = new ParallelArray([ [1,2], [3,4] ]); // <<1,2>,<3,4>> pa.flatten(); // <1,2,3,4> Partition used to restore the original shape of the array. var pa = new ParallelArray([1,2,3,4]); // <1,2,3,4> pa.partition(2); // <<1,2>,<3,4>> Get return value found at the indices or undefined if no such value exists. var pa = new ParallelArray([0,1,2,3,4], [10,11,12,13,14], [20,21,22,23,24]) pa.get([1,1]); // 11 pa.get([1]); // <10,11,12,13,14>

  Read the article

• DevConnections Spring 2010 Speaker Evals and Tips

  As a conference speaker, I always look forward to hearing from attendees whether they felt my sessions were valuable and worth their time.  Its always gratifying  get a high score, but of course its the (preferably constructive) criticism thats key to continued improvement.  Im by no means the best technical presenter around, and Im always looking for ways to improve. Ive recently spoken at a few events, including TechEd and an Ohio event called Stir Trek.  DevConnections was actually back in April, but theyre just getting their final evals out to speakers.  TechEd, of course, does online evals so immediately after your talks you can see what people think.  Ill try and post my TechEd evals in the next week or so. I gave 3 talks at DevConnections Spring 2010 / VS2010 Launch which I discussed in this previous blog post.  In this follow-up, Im just going to share some eval info and my thoughts on it, albeit a couple of months later. Pragmatic ASP.NET Tips, Tricks, and Tools Evals Turned In: 27 Overall Eval: 3.74 Average Score: 3.47 89% found the technical level Just Right.  7.4% thought it was too basic (3.6% did not respond).  Since nobody thought the content was Too complex, I could perhaps have added some more complex material, but having about 90% say its Just Right is pretty good. 92% said at least 50% of the material was new to them.  36% said 75% or more was new.  Thats also pretty good, I think. 77.8% can use the information immediately; 15% can use it within 2-6 months (7.2 % no response). Overall 78% rated the session Excellent, 18% Good, 4% Fair. All comments (9): Steve did a great job Excellent session! It was good. Im now super excited to attend Steves other sessions later today.  Very useful. One of the best speakers here.  Bring him back to future conferences please. Continue to have this session with new and old stuff.  I always find something I did not know about. Excellent!  This was the best session Ive seen all week. Did not increase font on all pages could not see. For Steve to have had more sessions. Note to self make the fonts bigger across the board.  Otherwise, this is all good for my ego. :)  This is always a very popular session and one I really enjoy giving.  Tips and Tricks talks are pretty easy because you dont have to go in depth with any particular thing, and theyre almost always with existing technology so youre not dealing with betas, lack of documentation, and other issues.  Its an easy session to do well, in my experience, and one which I think attendees definitely appreciate.   Whats New in ASP.NET MVC 2 Evals Turned In: 23 Overall Eval: 3.77 Average Score: 3.47 (wow, I cant believe I scored better on this talk than the tips and tricks talk, which Ive given many times and was more excited about) 96% found the technical level Just Right.  90% found 50% or more of the material to be new.  43% can use the info immediately, and another 43% can use it within 2-6 months I guess that speaks to adoption rates of MVC 2 among my attendees Overall 74% said the session was Excellent, 22% Good.  4% No Response. All Comments (6): Great job, thank you. Great speaker! Really good, a little lost in the code at some points, but great information. Speaker needs to repeat questions from audience for everyone to hear. Exceeded my expectations. Great speaker, very informative. I really do try to religiously repeat questions from the audience for everyone to hear, but obviously I didnt do it 100% of the time.  Note to self remember to repeat questions.  That and making fonts big are really basic speaker best practices, which just goes to prove that fundamentals are always something that can be perfected.   SOLIDify Your ASP.NET MVC 2 Application Evals Turned In: 8 (!) Overall Eval: 3.63 Average Score: 3.47 As I recall this was one of the last talks of the day / show, which might account for the low number of evals turned in.  I dont recall speaking to an empty room for this talk, although it certainly wasnt as crowded as the tips and tricks talk. 100% found the technical level Just Right.  100% found at least half the material new.  62.5% can use it at once and 37.5% within 2-6 months.  62.5% rated the session Excellent overall; 37.5% Good.  Im thinking there were 5 evals with all 4s checked and 3 with all 3s checked (4 = Excellent, 3 = Good) All Comments (3): This covered many topics Ive read about recently, and it helped reinforce them. It was a nice overview of the solid principle, but I thought there might be specifics for MVC2.  I am glad there is not. Move a little slower. Ok, so another fundamental dont go too fast.  Looks like I got one fundamental tip from the comments of each talk. My Take-Aways Remember the fundamentals.  Its worth going through a checklist prior to presenting to make sure these things are fresh in your mind.  Increase all font sizes.  Repeat all questions from audience members without microphones (this is also a great way to stall for time, btw).  Resist the urge to move too quickly especially if youre nervous or short of time.  Writing this up in a blog post also further reinforces these fundamentals for me, which is one of the main reasons why I do it I retain things better when I write them, and even moreso when I write them for public consumption since I have to really think about what Im saying.  And maybe a few of you find this interesting or helpful, which is a bonus. Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• When is a Seek not a Seek?

  - by Paul White

  The following script creates a single-column clustered table containing the integers from 1 to 1,000 inclusive. IF OBJECT_ID(N'tempdb..#Test', N'U') IS NOT NULL DROP TABLE #Test ; GO CREATE TABLE #Test ( id INTEGER PRIMARY KEY CLUSTERED ); ; INSERT #Test (id) SELECT V.number FROM master.dbo.spt_values AS V WHERE V.[type] = N'P' AND V.number BETWEEN 1 AND 1000 ; Let’s say we need to find the rows with values from 100 to 170, excluding any values that divide exactly by 10.  One way to write that query would be: SELECT T.id FROM #Test AS T WHERE T.id IN ( 101,102,103,104,105,106,107,108,109, 111,112,113,114,115,116,117,118,119, 121,122,123,124,125,126,127,128,129, 131,132,133,134,135,136,137,138,139, 141,142,143,144,145,146,147,148,149, 151,152,153,154,155,156,157,158,159, 161,162,163,164,165,166,167,168,169 ) ; That query produces a pretty efficient-looking query plan: Knowing that the source column is defined as an INTEGER, we could also express the query this way: SELECT T.id FROM #Test AS T WHERE T.id >= 101 AND T.id <= 169 AND T.id % 10 > 0 ; We get a similar-looking plan: If you look closely, you might notice that the line connecting the two icons is a little thinner than before.  The first query is estimated to produce 61.9167 rows – very close to the 63 rows we know the query will return.  The second query presents a tougher challenge for SQL Server because it doesn’t know how to predict the selectivity of the modulo expression (T.id % 10 > 0).  Without that last line, the second query is estimated to produce 68.1667 rows – a slight overestimate.  Adding the opaque modulo expression results in SQL Server guessing at the selectivity.  As you may know, the selectivity guess for a greater-than operation is 30%, so the final estimate is 30% of 68.1667, which comes to 20.45 rows. The second difference is that the Clustered Index Seek is costed at 99% of the estimated total for the statement.  For some reason, the final SELECT operator is assigned a small cost of 0.0000484 units; I have absolutely no idea why this is so, or what it models.  Nevertheless, we can compare the total cost for both queries: the first one comes in at 0.0033501 units, and the second at 0.0034054.  The important point is that the second query is costed very slightly higher than the first, even though it is expected to produce many fewer rows (20.45 versus 61.9167). If you run the two queries, they produce exactly the same results, and both complete so quickly that it is impossible to measure CPU usage for a single execution.  We can, however, compare the I/O statistics for a single run by running the queries with STATISTICS IO ON: Table '#Test'. Scan count 63, logical reads 126, physical reads 0. Table '#Test'. Scan count 01, logical reads 002, physical reads 0. The query with the IN list uses 126 logical reads (and has a ‘scan count’ of 63), while the second query form completes with just 2 logical reads (and a ‘scan count’ of 1).  It is no coincidence that 126 = 63 * 2, by the way.  It is almost as if the first query is doing 63 seeks, compared to one for the second query. In fact, that is exactly what it is doing.  There is no indication of this in the graphical plan, or the tool-tip that appears when you hover your mouse over the Clustered Index Seek icon.  To see the 63 seek operations, you have click on the Seek icon and look in the Properties window (press F4, or right-click and choose from the menu): The Seek Predicates list shows a total of 63 seek operations – one for each of the values from the IN list contained in the first query.  I have expanded the first seek node to show the details; it is seeking down the clustered index to find the entry with the value 101.  Each of the other 62 nodes expands similarly, and the same information is contained (even more verbosely) in the XML form of the plan. Each of the 63 seek operations starts at the root of the clustered index B-tree and navigates down to the leaf page that contains the sought key value.  Our table is just large enough to need a separate root page, so each seek incurs 2 logical reads (one for the root, and one for the leaf).  We can see the index depth using the INDEXPROPERTY function, or by using the a DMV: SELECT S.index_type_desc, S.index_depth FROM sys.dm_db_index_physical_stats ( DB_ID(N'tempdb'), OBJECT_ID(N'tempdb..#Test', N'U'), 1, 1, DEFAULT ) AS S ; Let’s look now at the Properties window when the Clustered Index Seek from the second query is selected: There is just one seek operation, which starts at the root of the index and navigates the B-tree looking for the first key that matches the Start range condition (id >= 101).  It then continues to read records at the leaf level of the index (following links between leaf-level pages if necessary) until it finds a row that does not meet the End range condition (id <= 169).  Every row that meets the seek range condition is also tested against the Residual Predicate highlighted above (id % 10 > 0), and is only returned if it matches that as well. You will not be surprised that the single seek (with a range scan and residual predicate) is much more efficient than 63 singleton seeks.  It is not 63 times more efficient (as the logical reads comparison would suggest), but it is around three times faster.  Let’s run both query forms 10,000 times and measure the elapsed time: DECLARE @i INTEGER, @n INTEGER = 10000, @s DATETIME = GETDATE() ; SET NOCOUNT ON; SET STATISTICS XML OFF; ; WHILE @n > 0 BEGIN SELECT @i = T.id FROM #Test AS T WHERE T.id IN ( 101,102,103,104,105,106,107,108,109, 111,112,113,114,115,116,117,118,119, 121,122,123,124,125,126,127,128,129, 131,132,133,134,135,136,137,138,139, 141,142,143,144,145,146,147,148,149, 151,152,153,154,155,156,157,158,159, 161,162,163,164,165,166,167,168,169 ) ; SET @n -= 1; END ; PRINT DATEDIFF(MILLISECOND, @s, GETDATE()) ; GO DECLARE @i INTEGER, @n INTEGER = 10000, @s DATETIME = GETDATE() ; SET NOCOUNT ON ; WHILE @n > 0 BEGIN SELECT @i = T.id FROM #Test AS T WHERE T.id >= 101 AND T.id <= 169 AND T.id % 10 > 0 ; SET @n -= 1; END ; PRINT DATEDIFF(MILLISECOND, @s, GETDATE()) ; On my laptop, running SQL Server 2008 build 4272 (SP2 CU2), the IN form of the query takes around 830ms and the range query about 300ms.  The main point of this post is not performance, however – it is meant as an introduction to the next few parts in this mini-series that will continue to explore scans and seeks in detail. When is a seek not a seek?  When it is 63 seeks © Paul White 2011 email: [email protected] twitter: @SQL_kiwi

  Read the article

• The Sensemaking Spectrum for Business Analytics: Translating from Data to Business Through Analysis

  - by Joe Lamantia

  One of the most compelling outcomes of our strategic research efforts over the past several years is a growing vocabulary that articulates our cumulative understanding of the deep structure of the domains of discovery and business analytics. Modes are one example of the deep structure we’ve found.  After looking at discovery activities across a very wide range of industries, question types, business needs, and problem solving approaches, we've identified distinct and recurring kinds of sensemaking activity, independent of context.  We label these activities Modes: Explore, compare, and comprehend are three of the nine recognizable modes.  Modes describe *how* people go about realizing insights.  (Read more about the programmatic research and formal academic grounding and discussion of the modes here: https://www.researchgate.net/publication/235971352_A_Taxonomy_of_Enterprise_Search_and_Discovery) By analogy to languages, modes are the 'verbs' of discovery activity.  When applied to the practical questions of product strategy and development, the modes of discovery allow one to identify what kinds of analytical activity a product, platform, or solution needs to support across a spread of usage scenarios, and then make concrete and well-informed decisions about every aspect of the solution, from high-level capabilities, to which specific types of information visualizations better enable these scenarios for the types of data users will analyze. The modes are a powerful generative tool for product making, but if you've spent time with young children, or had a really bad hangover (or both at the same time...), you understand the difficult of communicating using only verbs.  So I'm happy to share that we've found traction on another facet of the deep structure of discovery and business analytics.  Continuing the language analogy, we've identified some of the ‘nouns’ in the language of discovery: specifically, the consistently recurring aspects of a business that people are looking for insight into.  We call these discovery Subjects, since they identify *what* people focus on during discovery efforts, rather than *how* they go about discovery as with the Modes. Defining the collection of Subjects people repeatedly focus on allows us to understand and articulate sense making needs and activity in more specific, consistent, and complete fashion.  In combination with the Modes, we can use Subjects to concretely identify and define scenarios that describe people’s analytical needs and goals.  For example, a scenario such as ‘Explore [a Mode] the attrition rates [a Measure, one type of Subject] of our largest customers [Entities, another type of Subject] clearly captures the nature of the activity — exploration of trends vs. deep analysis of underlying factors — and the central focus — attrition rates for customers above a certain set of size criteria — from which follow many of the specifics needed to address this scenario in terms of data, analytical tools, and methods. We can also use Subjects to translate effectively between the different perspectives that shape discovery efforts, reducing ambiguity and increasing impact on both sides the perspective divide.  For example, from the language of business, which often motivates analytical work by asking questions in business terms, to the perspective of analysis.  The question posed to a Data Scientist or analyst may be something like “Why are sales of our new kinds of potato chips to our largest customers fluctuating unexpectedly this year?” or “Where can innovate, by expanding our product portfolio to meet unmet needs?”.  Analysts translate questions and beliefs like these into one or more empirical discovery efforts that more formally and granularly indicate the plan, methods, tools, and desired outcomes of analysis.  From the perspective of analysis this second question might become, “Which customer needs of type ‘A', identified and measured in terms of ‘B’, that are not directly or indirectly addressed by any of our current products, offer 'X' potential for ‘Y' positive return on the investment ‘Z' required to launch a new offering, in time frame ‘W’?  And how do these compare to each other?”.  Translation also happens from the perspective of analysis to the perspective of data; in terms of availability, quality, completeness, format, volume, etc. By implication, we are proposing that most working organizations — small and large, for profit and non-profit, domestic and international, and in the majority of industries — can be described for analytical purposes using this collection of Subjects.  This is a bold claim, but simplified articulation of complexity is one of the primary goals of sensemaking frameworks such as this one.  (And, yes, this is in fact a framework for making sense of sensemaking as a category of activity - but we’re not considering the recursive aspects of this exercise at the moment.) Compellingly, we can place the collection of subjects on a single continuum — we call it the Sensemaking Spectrum — that simply and coherently illustrates some of the most important relationships between the different types of Subjects, and also illuminates several of the fundamental dynamics shaping business analytics as a domain.  As a corollary, the Sensemaking Spectrum also suggests innovation opportunities for products and services related to business analytics. The first illustration below shows Subjects arrayed along the Sensemaking Spectrum; the second illustration presents examples of each kind of Subject.  Subjects appear in colors ranging from blue to reddish-orange, reflecting their place along the Spectrum, which indicates whether a Subject addresses more the viewpoint of systems and data (Data centric and blue), or people (User centric and orange).  This axis is shown explicitly above the Spectrum.  Annotations suggest how Subjects align with the three significant perspectives of Data, Analysis, and Business that shape business analytics activity.  This rendering makes explicit the translation and bridging function of Analysts as a role, and analysis as an activity. Subjects are best understood as fuzzy categories [http://georgelakoff.files.wordpress.com/2011/01/hedges-a-study-in-meaning-criteria-and-the-logic-of-fuzzy-concepts-journal-of-philosophical-logic-2-lakoff-19731.pdf], rather than tightly defined buckets.  For each Subject, we suggest some of the most common examples: Entities may be physical things such as named products, or locations (a building, or a city); they could be Concepts, such as satisfaction; or they could be Relationships between entities, such as the variety of possible connections that define linkage in social networks.  Likewise, Events may indicate a time and place in the dictionary sense; or they may be Transactions involving named entities; or take the form of Signals, such as ‘some Measure had some value at some time’ - what many enterprises understand as alerts.   The central story of the Spectrum is that though consumers of analytical insights (represented here by the Business perspective) need to work in terms of Subjects that are directly meaningful to their perspective — such as Themes, Plans, and Goals — the working realities of data (condition, structure, availability, completeness, cost) and the changing nature of most discovery efforts make direct engagement with source data in this fashion impossible.  Accordingly, business analytics as a domain is structured around the fundamental assumption that sense making depends on analytical transformation of data.  Analytical activity incrementally synthesizes more complex and larger scope Subjects from data in its starting condition, accumulating insight (and value) by moving through a progression of stages in which increasingly meaningful Subjects are iteratively synthesized from the data, and recombined with other Subjects.  The end goal of  ‘laddering’ successive transformations is to enable sense making from the business perspective, rather than the analytical perspective.Synthesis through laddering is typically accomplished by specialized Analysts using dedicated tools and methods. Beginning with some motivating question such as seeking opportunities to increase the efficiency (a Theme) of fulfillment processes to reach some level of profitability by the end of the year (Plan), Analysts will iteratively wrangle and transform source data Records, Values and Attributes into recognizable Entities, such as Products, that can be combined with Measures or other data into the Events (shipment of orders) that indicate the workings of the business.  More complex Subjects (to the right of the Spectrum) are composed of or make reference to less complex Subjects: a business Process such as Fulfillment will include Activities such as confirming, packing, and then shipping orders.  These Activities occur within or are conducted by organizational units such as teams of staff or partner firms (Networks), composed of Entities which are structured via Relationships, such as supplier and buyer.  The fulfillment process will involve other types of Entities, such as the products or services the business provides.  The success of the fulfillment process overall may be judged according to a sophisticated operating efficiency Model, which includes tiered Measures of business activity and health for the transactions and activities included.  All of this may be interpreted through an understanding of the operational domain of the businesses supply chain (a Domain).   We'll discuss the Spectrum in more depth in succeeding posts.

  Read the article

• JavaOne Session Report: “50 Tips in 50 Minutes for GlassFish Fans”

  - by Janice J. Heiss

  At JavaOne 2012 on Monday, Oracle’s Engineer Chris Kasso, and Technology Evangelist Arun Gupta, presented a head-spinning session (CON4701) in which they offered 50 tips for GlassFish fans. Kasso and Gupta alternated back and forth with each presenting 10 tips at a time. An audience of about (appropriately) 50 attentive and appreciative developers was on hand in what has to be one of the most information-packed sessions ever at JavaOne!Aside: I experienced one of the quiet joys of JavaOne when, just before the session began, I spotted Java Champion and JavaOne Rock Star Adam Bien sitting nearby – Adam is someone I have been fortunate to know for many years.GlassFish is a freely available, commercially supported Java EE reference implementation. The session prioritized quantity of tips over depth of information and offered tips that are intended for both seasoned and new users, that are meant to increase the range of functional options available to GlassFish users. The focus was on lesser-known dimensions of GlassFish. Attendees were encouraged to pursue tips that contained new information for them. All 50 tips can be accessed here.Below are several examples of more elaborate tips and a final practical tip on how to get in touch with these folks. Tip #1: Using the login Command * To execute a remote command with asadmin you must provide the admin's user name and password.* The login command allows you to store the login credentials to be reused in subsequent commands.* Can be logged into multiple servers (distinguish by host and port). Example:     % asadmin --host ouch login     Enter admin user name [default: admin]>     Enter admin password>     Login information relevant to admin user name [admin]     for host [ouch] and admin port [4848] stored at     [/Users/ckasso/.asadminpass] successfully.     Make sure that this file remains protected.     Information stored in this file will be used by     asadmin commands to manage the associated domain.     Command login executed successfully.     % asadmin --host ouch list-clusters     c1 not running     Command list-clusters executed successfully.Tip #4: Using the AS_DEBUG Env Variable* Environment variable to control client side debug output* Exposes: command processing info URL used to access the command:                           http://localhost:4848/__asadmin/uptime Raw response from the server Example:   % export AS_DEBUG=true  % asadmin uptime  CLASSPATH= ./../glassfish/modules/admin-cli.jar  Commands: [uptime]  asadmin extension directory: /work/gf-3.1.2/glassfish3/glassfish/lib/asadm      ------- RAW RESPONSE  ---------   Signature-Version: 1.0   message: Up 7 mins 10 secs   milliseconds_value: 430194   keys: milliseconds   milliseconds_name: milliseconds   use-main-children-attribute: false   exit-code: SUCCESS  ------- RAW RESPONSE  ---------Tip #11: Using Password Aliases * Some resources require a password to access (e.g. DB, JMS, etc.).* The resource connector is defined in the domain.xml.Example:Suppose the DB resource you wish to access requires an entry like this in the domain.xml:     <property name="password" value="secretp@ssword"/>But company policies do not allow you to store the password in the clear.* Use password aliases to avoid storing the password in the domain.xml* Create a password alias:     % asadmin create-password-alias DB_pw_alias     Enter the alias password>     Enter the alias password again>     Command create-password-alias executed successfully.* The password is stored in domain's encrypted keystore.* Now update the password value in the domain.xml:     <property name="password" value="${ALIAS=DB_pw_alias}"/>Tip #21: How to Start GlassFish as a Service * Configuring a server to automatically start at boot can be tedious.* Each platform does it differently.* The create-service command makes this easy.   Windows: creates a Windows service Linux: /etc/init.d script Solaris: Service Management Facility (SMF) service * Must execute create-service with admin privileges.* Can be used for the DAS or instances* Try it first with the --dry-run option.* There is a (unsupported) _delete-serverExample:     # asadmin create-service domain1     The Service was created successfully. Here are the details:     Name of the service:application/GlassFish/domain1     Type of the service:Domain     Configuration location of the service:/work/gf-3.1.2.2/glassfish3/glassfish/domains     Manifest file location on the system:/var/svc/manifest/application/GlassFish/domain1_work_gf-3.1.2.2_glassfish3_glassfish_domains/Domain-service-smf.xml.     You have created the service but you need to start it yourself. Here are the most typical Solaris commands of interest:     * /usr/bin/svcs  -a | grep domain1  // status     * /usr/sbin/svcadm enable domain1 // start     * /usr/sbin/svcadm disable domain1 // stop     * /usr/sbin/svccfg delete domain1 // uninstallTip #34: Posting a Command via REST* Use wget/curl to execute commands on the DAS.Example:  Deploying an application   % curl -s -S \       -H 'Accept: application/json' -X POST \       -H 'X-Requested-By: anyvalue' \       -F id=@/path/to/application.war \       -F force=true http://localhost:4848/management/domain/applications/application* Use @ before a file name to tell curl to send the file's contents.* The force option tells GlassFish to force the deployment in case the application is already deployed.* Use wget/curl to execute commands on the DAS.Example:  Deploying an application   % curl -s -S \       -H 'Accept: application/json' -X POST \       -H 'X-Requested-By: anyvalue' \       -F id=@/path/to/application.war \       -F force=true http://localhost:4848/management/domain/applications/application* Use @ before a file name to tell curl to send the file's contents.* The force option tells GlassFish to force the deployment in case the application is already deployed.Tip #46: Upgrading to a Newer Version * Upgrade applications and configuration from an earlier version* Upgrade Tool: Side-by-side upgrade– GUI: asupgrade– CLI: asupgrade --c– What happens ?* Copies older source domain -> target domain directory* asadmin start-domain --upgrade* Update Tool and pkg: In-place upgrade– GUI: updatetool, install all Available Updates– CLI: pkg image-update– Upgrade the domain* asadmin start-domain --upgradeTip #50: How to reach us?* GlassFish Forum: http://www.java.net/forums/glassfish/glassfish* [email protected]* @glassfish* facebook.com/glassfish* youtube.com/GlassFishVideos* blogs.oracle.com/theaquariumArun Gupta acknowledged that their method of presentation was experimental and actively solicited feedback about the session. The best way to reach them is on the GlassFish user forum.In addition, check out Gupta’s new book Java EE 6 Pocket Guide.

  Read the article

• Who could ask for more with LESS CSS? (Part 2 of 3&ndash;Setup)

  - by ToStringTheory

  Welcome to part two in my series covering the LESS CSS language.  In the first post, I covered the two major CSS precompiled languages - LESS and SASS to a small extent, iterating over some of the features that you could expect to find in them.  In this post, I will go a little further in depth into the setup and execution of using the LESS framework. Introduction It really doesn’t take too much to get LESS working in your project.  The basic workflow will be including the necessary translator in your project, defining bundles for the LESS files, add the necessary code to your layouts.cshtml file, and finally add in all your necessary styles to the LESS files!  Lets get started… New Project Just like all great experiments in Visual Studio, start up a File > New Project, and create a new MVC 4 Web Application.  The Base Package After you have the new project spun up, use the Nuget Package Manager to install the Bundle Transformer: LESS package. This will take care of installing the main translator that we will be using for LESS code (dotless which is another Nuget package), as well as the core framework for the Bundle Transformer library.  The installation will come up with some instructions in a readme file on how to modify your web.config to handle all your *.less requests through the Bundle Transformer, which passes the translating onto dotless. Where To Put These LESS Files?! This step isn’t really a requirement, however I find that I don’t like how ASP.Net MVC just has a content directory where they store CSS, content images, css images….  In my project, I went ahead and created a new directory just for styles – LESS files, CSS files, and images that are only referenced in LESS or CSS.  Ignore the MVC directory as this was my testbed for another project I was working on at the same time.  As you can see here, I have: A top level directory for images which contains only images used in a page A top level directory for scripts A top level directory for Styles A few directories for plugins I am using (Colrizr, JQueryUI, Farbtastic) Multiple *.less files for different functions (I’ll go over these in a minute) I find that this layout offers the best separation of content types.  Bring Out Your Bundles! The next thing that we need to do is add in the necessary code for the bundling of these LESS files.  Go ahead and open your BundleConfig.cs file, usually located in the /App_Start/ folder of the project.  As you will see in a minute, instead of using the method Microsoft does in the base MVC 4 project, I change things up a bit.  Define Constants The first thing I do is define constants for each of the virtual paths that will be used in the bundler: The main reason is that I hate magic strings in my program, so the fact that you first defined a virtual path in the BundleConfig file, and then used that path in the _Layout.cshtml file really irked me. Add Bundles to the BundleCollection Next, I am going to define the bundles for my styles in my AddStyleBundles method: That is all it takes to get all of my styles in play with LESS.  The CssTransformer and NullOrderer types come from the Bundle Transformer we grabbed earlier.  If we didn’t use that package, we would have to write our own function (not too hard, but why do it if it’s been done). I use the site.less file as my main hub for LESS - I will cover that more in the next section. Add Bundles To Layout.cshtml File With the constants in the BundleConfig file, instead of having to use the same magic string I defined for the bundle virtual path, I am able to do this: Notice here that besides the RenderSection magic strings (something I am working on in another side project), all of the bundles are now based on const strings.  If I need to change the virtual path, I only have to do it in one place.  Nifty! Get Started! We are now ready to roll!  As I said in the previous section, I use the site.less file as a central hub for my styles: As seen here, I have a reset.css file which is a simple CSS reset.  Next, I have created a file for managing all my color variables – colors.less: Here, you can see some of the standards I started to use, in this case for color variables.  I define all color variables with the @col prefix.  Currently, I am going for verbose variable names. The next file imported is my font.less file that defines the typeface information for the site: Simple enough.  A couple of imports for fonts from Google, and then declaring variables for use throughout LESS.  I also set up the heading sizes, margins, etc..  You can also see my current standardization for font declaration strings – @font. Next, I pull in a mixins.less file that I grabbed from the Twitter Bootstrap library that gives some useful parameterized mixins for use such as border-radius, gradient, box-shadow, etc… The common.less file is a file that just contains items that I will be defining that can be used across all my LESS files.  Kind of like my own mixins or font-helpers: Finally I have my layout.less file that contains all of my definitions for general site layout – width, main/sidebar widths, footer layout, etc: That’s it!  For the rest of my one off definitions/corrections, I am currently putting them into the site.less file beneath my original imports Note Probably my favorite side effect of using the LESS handler/translator while bundling is that it also does a CSS checkup when rendering…  See, when your web.config is set to debug, bundling will output the url to the direct less file, not the bundle, and the http handler intercepts the call, compiles the less, and returns the result.  If there is an error in your LESS code, the CSS file can be returned empty, or may have the error output as a comment on the first couple lines. If you have the web.config set to not debug, then if there is an error in your code, you will end up with the usual ASP.Net exception page (unless you catch the exception of course), with information regarding the failure of the conversion, such as brace mismatch, undefined variable, etc…  I find it nifty. Conclusion This is really just the beginning.  LESS is very powerful and exciting!  My next post will show an actual working example of why LESS is so powerful with its functions and variables…  At least I hope it will!  As for now, if you have any questions, comments, or suggestions on my current practice, I would love to hear them!  Feel free to drop a comment or shoot me an email using the contact page.  In the mean time, I plan on posting the final post in this series tomorrow or the day after, with my side project, as well as a whole base ASP.Net MVC4 templated project with LESS added in it so that you can check out the layout I have in this post.  Until next time…

  Read the article

• Problem with RAID5 (mdadm) - disk detached

  - by poscaman

  Having these lines in /var/log/syslog Apr 18 16:53:05 Server kernel: [4487878.816036] ata4: EH in SWNCQ mode,QC:qc_active 0x1 sactive 0x1 Apr 18 16:53:05 Server kernel: [4487878.816058] ata4: SWNCQ:qc_active 0x1 defer_bits 0x0 last_issue_tag 0x0 Apr 18 16:53:05 Server kernel: [4487878.816059] dhfis 0x1 dmafis 0x1 sdbfis 0x0 Apr 18 16:53:05 Server kernel: [4487878.816093] ata4: ATA_REG 0x40 ERR_REG 0x0 Apr 18 16:53:05 Server kernel: [4487878.816108] ata4: tag : dhfis dmafis sdbfis sacitve Apr 18 16:53:05 Server kernel: [4487878.816125] ata4: tag 0x0: 1 1 0 1 Apr 18 16:53:05 Server kernel: [4487878.816150] ata4.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6 frozen Apr 18 16:53:05 Server kernel: [4487878.816178] ata4.00: failed command: WRITE FPDMA QUEUED Apr 18 16:53:05 Server kernel: [4487878.816199] ata4.00: cmd 61/08:00:00:88:e0/00:00:e8:00:00/40 tag 0 ncq 4096 out Apr 18 16:53:05 Server kernel: [4487878.816200] res 40/00:00:01:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) Apr 18 16:53:05 Server kernel: [4487878.816253] ata4.00: status: { DRDY } Apr 18 16:53:05 Server kernel: [4487878.816272] ata4: hard resetting link Apr 18 16:53:05 Server kernel: [4487878.816274] ata4: nv: skipping hardreset on occupied port Apr 18 16:53:06 Server kernel: [4487879.676029] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Apr 18 16:53:07 Server kernel: [4487880.416749] ata4.00: n_sectors mismatch 3907029168 != 268435455 Apr 18 16:53:07 Server kernel: [4487880.416752] ata4.00: revalidation failed (errno=-19) Apr 18 16:53:07 Server kernel: [4487880.416773] ata4.00: limiting speed to UDMA/133:PIO2 Apr 18 16:53:11 Server kernel: [4487884.676024] ata4: hard resetting link Apr 18 16:53:11 Server kernel: [4487884.676027] ata4: nv: skipping hardreset on occupied port Apr 18 16:53:12 Server kernel: [4487885.144032] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Apr 18 16:53:12 Server kernel: [4487885.240185] ata4.00: failed to IDENTIFY (INIT_DEV_PARAMS failed, err_mask=0x80) Apr 18 16:53:12 Server kernel: [4487885.240190] ata4.00: revalidation failed (errno=-5) Apr 18 16:53:12 Server kernel: [4487885.240210] ata4.00: disabled Apr 18 16:53:17 Server kernel: [4487890.144023] ata4: hard resetting link Apr 18 16:53:17 Server kernel: [4487891.024033] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Apr 18 16:53:17 Server kernel: [4487891.033357] ata4.00: ATA-8: WDC WD20EARS-00S8B1, 80.00A80, max UDMA/133 Apr 18 16:53:17 Server kernel: [4487891.033360] ata4.00: 3907029168 sectors, multi 1: LBA48 NCQ (depth 31/32) Apr 18 16:53:17 Server kernel: [4487891.048347] ata4.00: configured for UDMA/133 Apr 18 16:53:17 Server kernel: [4487891.048361] sd 3:0:0:0: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE Apr 18 16:53:17 Server kernel: [4487891.048365] sd 3:0:0:0: [sdc] Sense Key : Aborted Command [current] [descriptor] Apr 18 16:53:17 Server kernel: [4487891.048369] Descriptor sense data with sense descriptors (in hex): Apr 18 16:53:17 Server kernel: [4487891.048371] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 Apr 18 16:53:17 Server kernel: [4487891.048378] 00 00 00 00 Apr 18 16:53:17 Server kernel: [4487891.048382] sd 3:0:0:0: [sdc] Add. Sense: No additional sense information Apr 18 16:53:17 Server kernel: [4487891.048385] sd 3:0:0:0: [sdc] CDB: Write(10): 2a 00 e8 e0 88 00 00 00 08 00 Apr 18 16:53:17 Server kernel: [4487891.048393] end_request: I/O error, dev sdc, sector 3907028992 Apr 18 16:53:17 Server kernel: [4487891.048420] sd 3:0:0:0: rejecting I/O to offline device Apr 18 16:53:17 Server kernel: [4487891.048440] sd 3:0:0:0: rejecting I/O to offline device Apr 18 16:53:17 Server kernel: [4487891.048458] end_request: I/O error, dev sdc, sector 3907028992 Apr 18 16:53:17 Server kernel: [4487891.048477] md: super_written gets error=-5, uptodate=0 Apr 18 16:53:17 Server kernel: [4487891.048482] raid5: Disk failure on sdc, disabling device. Apr 18 16:53:17 Server kernel: [4487891.048483] raid5: Operation continuing on 3 devices. Apr 18 16:53:17 Server kernel: [4487891.048525] ata4: EH complete Apr 18 16:53:17 Server kernel: [4487891.048554] sd 3:0:0:0: rejecting I/O to offline device Apr 18 16:53:17 Server kernel: [4487891.048576] sd 3:0:0:0: rejecting I/O to offline device Apr 18 16:53:17 Server kernel: [4487891.048596] sd 3:0:0:0: rejecting I/O to offline device Apr 18 16:53:17 Server kernel: [4487891.048615] sd 3:0:0:0: [sdc] READ CAPACITY(16) failed Apr 18 16:53:17 Server kernel: [4487891.048617] sd 3:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK Apr 18 16:53:17 Server kernel: [4487891.048620] sd 3:0:0:0: [sdc] Sense not available. Apr 18 16:53:17 Server kernel: [4487891.048624] sd 3:0:0:0: rejecting I/O to offline device Apr 18 16:53:17 Server kernel: [4487891.048643] sd 3:0:0:0: rejecting I/O to offline device Apr 18 16:53:17 Server kernel: [4487891.048663] sd 3:0:0:0: rejecting I/O to offline device Apr 18 16:53:17 Server kernel: [4487891.048681] sd 3:0:0:0: [sdc] READ CAPACITY failed Apr 18 16:53:17 Server kernel: [4487891.048683] sd 3:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK Apr 18 16:53:17 Server kernel: [4487891.048685] sd 3:0:0:0: [sdc] Sense not available. Apr 18 16:53:17 Server kernel: [4487891.048689] sd 3:0:0:0: rejecting I/O to offline device Apr 18 16:53:17 Server kernel: [4487891.048709] sd 3:0:0:0: rejecting I/O to offline device Apr 18 16:53:17 Server kernel: [4487891.048800] sd 3:0:0:0: rejecting I/O to offline device Apr 18 16:53:17 Server kernel: [4487891.048860] sd 3:0:0:0: rejecting I/O to offline device Apr 18 16:53:17 Server kernel: [4487891.049028] sd 3:0:0:0: [sdc] Asking for cache data failed Apr 18 16:53:17 Server kernel: [4487891.049048] sd 3:0:0:0: [sdc] Assuming drive cache: write through Apr 18 16:53:17 Server kernel: [4487891.049071] sdc: detected capacity change from 2000398934016 to 0 Apr 18 16:53:17 Server kernel: [4487891.049080] ata4.00: detaching (SCSI 3:0:0:0) Apr 18 16:53:18 Server kernel: [4487891.061149] sd 3:0:0:0: [sdc] Stopping disk Apr 18 16:53:18 Server kernel: [4487891.485492] RAID5 conf printout: Apr 18 16:53:18 Server kernel: [4487891.485496] --- rd:4 wd:3 Apr 18 16:53:18 Server kernel: [4487891.485500] disk 0, o:1, dev:sdb Apr 18 16:53:18 Server kernel: [4487891.485502] disk 1, o:0, dev:sdc Apr 18 16:53:18 Server kernel: [4487891.485504] disk 2, o:1, dev:sdd Apr 18 16:53:18 Server kernel: [4487891.485506] disk 3, o:1, dev:sde Apr 18 16:53:18 Server kernel: [4487891.497014] RAID5 conf printout: Apr 18 16:53:18 Server kernel: [4487891.497016] --- rd:4 wd:3 Apr 18 16:53:18 Server kernel: [4487891.497018] disk 0, o:1, dev:sdb Apr 18 16:53:18 Server kernel: [4487891.497019] disk 2, o:1, dev:sdd Apr 18 16:53:18 Server kernel: [4487891.497021] disk 3, o:1, dev:sde Apr 18 16:53:18 Server kernel: [4487891.838719] scsi 3:0:0:0: Direct-Access ATA WDC WD20EARS-00S 80.0 PQ: 0 ANSI: 5 Apr 18 16:53:18 Server kernel: [4487891.838886] sd 3:0:0:0: Attached scsi generic sg3 type 0 Apr 18 16:53:18 Server kernel: [4487891.838911] sd 3:0:0:0: [sdf] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) Apr 18 16:53:18 Server kernel: [4487891.838964] sd 3:0:0:0: [sdf] Write Protect is off Apr 18 16:53:18 Server kernel: [4487891.838967] sd 3:0:0:0: [sdf] Mode Sense: 00 3a 00 00 Apr 18 16:53:18 Server kernel: [4487891.838988] sd 3:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Apr 18 16:53:20 Server kernel: [4487891.839147] sdf: unknown partition table Apr 18 16:53:20 Server kernel: [4487893.130026] sd 3:0:0:0: [sdf] Attached SCSI disk Right now, i'm unable to do anything on /dev/sdc. Is there any way to try to re-attach it? I don't want to power-down the server unless absolutely necessary System: Debian Stable 2.6.32-5-amd64 mdadm version 3.1.4-1+8efb9d1 cat /proc/mdstat Personalities : [raid6] [raid5] [raid4] md0 : active raid5 sdb[0] sdc[4](F) sde[3] sdd[2] 5860543488 blocks level 5, 64k chunk, algorithm 2 [4/3] [U_UU] unused devices: <none> mdadm --examine --scan ARRAY /dev/md0 UUID=1a7744b5:912ec7af:f82a9565:e3b453b4

  Read the article

• Performance required to improve Windows Experience Index?

  - by Ian Boyd

  Is there a guide on the metrics required to obtain a certain Windows Experience Index? A Microsoft guy said in January 2009: On the matter of transparency, it is indeed our plan to disclose in great detail how the scores are calculated, what the tests attempt to measure, why, and how they map to realistic scenarios and usage patterns. Has that amount of transparency happened? Is there a technet article somewhere? If my score was limited by my Memory subscore of 5.9. A nieve person would suggest: Buy a faster RAM Which is wrong of course. From the Windows help: If your computer has a 64-bit central processing unit (CPU) and 4 gigabytes (GB) or less random access memory (RAM), then the Memory (RAM) subscore for your computer will have a maximum of 5.9. You can buy the fastest, overclocked, liquid-cooled, DDR5 RAM on the planet; you'll still have a maximum Memory subscore of 5.9. So in general the knee-jerk advice "buy better stuff" is not helpful. What i am looking for is attributes required to achieve a certain score, or move beyond a current limitation. The information i've been able to compile so far, chiefly from 3 Windows blog entries, and an article: Memory subscore Score Conditions ======= ================================ 1.0 < 256 MB 2.0 < 500 MB 2.9 <= 512 MB 3.5 < 704 MB 3.9 < 944 MB 4.5 <= 1.5 GB 5.9 < 4.0GB-64MB on a 64-bit OS Windows Vista highest score 7.9 Windows 7 highest score Graphics Subscore Score Conditions ======= ====================== 1.0 doesn't support DX9 1.9 doesn't support WDDM 4.9 does not support Pixel Shader 3.0 5.9 doesn't support DX10 or WDDM1.1 Windows Vista highest score 7.9 Windows 7 highest score Gaming graphics subscore Score Result ======= ============================= 1.0 doesn't support D3D 2.0 supports D3D9, DX9 and WDDM 5.9 doesn't support DX10 or WDDM1.1 Windows Vista highest score 6.0-6.9 good framerates (e.g. 40-50fps) at normal resoltuions (e.g. 1280x1024) 7.0-7.9 even higher framerates at even higher resolutions 7.9 Windows 7 highest score Processor subscore Score Conditions ======= ========================================================================== 5.9 Windows Vista highest score 6.0-6.9 many quad core processors will be able to score in the high 6 low 7 ranges 7.0+ many quad core processors will be able to score in the high 6 low 7 ranges 7.9 8-core systems will be able to approach 8.9 Windows 7 highest score Primary hard disk subscore (note) Score Conditions ======= ======================================== 1.9 Limit for pathological drives that stop responding when pending writes 2.0 Limit for pathological drives that stop responding when pending writes 2.9 Limit for pathological drives that stop responding when pending writes 3.0 Limit for pathological drives that stop responding when pending writes 5.9 highest you're likely to see without SSD Windows Vista highest score 7.9 Windows 7 highest score Bonus Chatter You can find your WEI detailed test results in: C:\Windows\Performance\WinSAT\DataStore e.g. 2011-11-06 01.00.19.482 Disk.Assessment (Recent).WinSAT.xml <WinSAT> <WinSPR> <DiskScore>5.9</DiskScore> </WinSPR> <Metrics> <DiskMetrics> <AvgThroughput units="MB/s" score="6.4" ioSize="65536" kind="Sequential Read">89.95188</AvgThroughput> <AvgThroughput units="MB/s" score="4.0" ioSize="16384" kind="Random Read">1.58000</AvgThroughput> <Responsiveness Reason="UnableToAssess" Kind="Cap">TRUE</Responsiveness> </DiskMetrics> </Metrics> </WinSAT> Pre-emptive snarky comment: "WEI is useless, it has no relation to reality" Fine, how do i increase my hard-drive's random I/O throughput? Update - Amount of memory limits rating Some people don't believe Microsoft's statement that having less than 4GB of RAM on a 64-bit edition of Windows doesn't limit the rating to 5.9: And from xxx.Formal.Assessment (Recent).WinSAT.xml: <WinSPR> <LimitsApplied> <MemoryScore> <LimitApplied Friendly="Physical memory available to the OS is less than 4.0GB-64MB on a 64-bit OS : limit mem score to 5.9" Relation="LT">4227858432</LimitApplied> </MemoryScore> </LimitsApplied> </WinSPR> References Windows Vista Team Blog: Windows Experience Index: An In-Depth Look Understand and improve your computer's performance in Windows Vista Engineering Windows 7 Blog: Engineering the Windows 7 “Windows Experience Index”

  Read the article

• What needs updating when moving a bootable Windows 7 (or Vista) partition?

  - by SuperTempel

  When I move a bootable NTFS partition with Windows on it to a different block offset, what needs updating to make it bootable again? In particular, here's what I tried: I have a disk with several partitions, one of which is the NTFS partition with Windows on it, and the disk uses the plain old MBR block 0 for the partitions layout (no more than 4 partitions). Now I format and partition a new, larger, disk. There I make room for the NTFS partition and copy the contents from the old disk's NTFS Windows partition into. And I make the partition "active". However, when I try to boot from this disk, I get a "read error" message immediately and the booting stops, the exact text is: A disk read error occurred Press Ctrl+Alt+Del to restart I verified that both disks have the same boot sector code in block 0. It seems to me that something else might need updating. I guess that somewhere there's a absolute block reference that I need to update, probably pointing to the next level loader or to the NT kernel. Update: I found this article going quite into the depth of what I want to know. However, it says to modify boot.ini, but I have Windows 7 installed here, where such things appear to have changed: No boot.ini but a folder called System Volume Information with GUID and other data in it that sounds related to my problem. Going to keep digging... Update 2: Thanks to the terrible looking but very informative website by starman, I was able to figure out the first step: The NTFS boot sector has a field for "hidden" sectors. This feld has to contain the sector number of the boot sector. This solves the "read error" message. Now, however, I get a "BOOTMGR is missing" error instead. Looks like there's another place where a block number has to be adjusted, but I can't find anything in the code listing about this. I do find a lot of help sites suggesting Windows tools for fixing this "BOOTMGR is missing" problem, but none seem to know what goes on behind the scenes. Kind of like suggesting to re-install Windows when there's a little problem with it. At least, those fixes seem to work, mostly involving the Bcdedit and Bootrec tools. Now, who knows what they do, especially the latter, in regards to a moved partition? Update 3: After lots of trial-and-error attempts, I believe now that the solution lies in the BCD-Template registry file, residing usually inside \Windows\System32\config. If I get this updated using the "bcdboot" command, Windows starts up from it. I am now in the middle of figuring out what information this registry contains relevant to the above question. Any pointers to the contents of this registry are welcome. Update 4: Turns out that while the BCD-Template file gets rewritten and has different binary contents than its predecessor, the values inside do not change. So it must be something else that bcdboot.exe writes. I had previously already checked if it changes the first 32 boot blocks of the partition, but they appear to remain unchanged. Parititon map doesn't get changed, either. So what is it that bcdboot modifies besides the BCD registry? Any tips on how I can trace that? Are there low level tools that show me what files a program writes to? Update 5: The answer seems to be: c:\Boot\BCD is also changed, and that appears to be the key file for the boot manager's process. I'll investigate this later... Update 6: It seems to be an important detail that I had originally two partitions created when I installed Windows 7: A small partition of 204800 sectors which appears to be a bootstrap partition, followed by the actual, large, partition containing the Windows system (drive C:). When I tried to transfer this installation to a new, larger, disk, I had kept the same two partitions intact on the new drive, although they ended up at a different offset. This alone led to the "BOOTMGR is missing" message. Since then, I've used bcdboot.exe only on the Windows partition, which added the \Boot\BCD file on that partition. That file (and folder) did originally only exist on the smaller partition. Hence, this problem may be more complicated in my case as one partition (the boot strapper) referred to another partition (the one containing the OS), whereas other people may only have to deal with one partition containing both, and maybe there the solution is simpler. Update 7: Found one more detail: The \Boot\BCD file records the MBR's serial number. If that number doesn't match, the system won't boot. Next I'll test if there's also an absolute block reference stored in there.

  Read the article

• What are ProductCode & UpgradeCode & GUID? How to detect if certain application/library is already i

  - by claws

  I've already gone through: http://stackoverflow.com/questions/211192/check-if-the-application-is-already-installed http://stackoverflow.com/questions/488717/detecting-if-a-program-is-already-installed-with-nsis http://nsis.sourceforge.net/Add_uninstall_information_to_Add/Remove_Programs My questions are little more in depth and little more general. So, as you understood my problem is that I want to check if "Certain Applications" are already installed on the user's machine? I'm generating the installer using Advanced Installer. First few questions: What is Upgrade Code? Advanced installer has option, Product Version (identify by Upgrade Code) What is Product Code? Advanced installer Product Version (identify by Product Code) Component is installed : GUID. What is GUID? All the above three has values like this: {49EB7A6A-1CEF-4A1E-9E89-B9A4993963E3} I don't know what these values are but it seems that computer is recognizing software using this kind of strange ID. My required applications are MySQL DBMS MySQL .NET Connector One fact that I discovered is Upgrade Code & Product Code can be extracted from its "msi installer". MySQL Server Installer = mysql-5.1.43-win32.msi Upgrade Code = {49EB7A6A-1CEF-4A1E-9E89-B9A4993963E3} Product Code = {0ECED7D8-FF53-4DC9-958E-C2177F528DE4} GUID (for component Installed) = ???? Uninstall Path = HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\{0ECED7D8-FF53-4DC9-958E-C2177F528DE4} Installer = mysql-5.1.46-win32.msi Upgrade Code = {49EB7A6A-1CEF-4A1E-9E89-B9A4993963E3} Product Code = {EA8FDE5A-2B33-4EDD-B7E7-8D179DF731A5} GUID (for component Installed) = ???? Uninstall Path = HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\{EA8FDE5A-2B33-4EDD-B7E7-8D179DF731A5} Installer = mysql-essential-5.1.46-win32.msi Upgrade Code = {49EB7A6A-1CEF-4A1E-9E89-B9A4993963E3} Product Code = {AD33AF2C-6485-4106-B012-1D9CDC88A454} GUID (for component Installed) = ???? Uninstall Path = HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\{AD33AF2C-6485-4106-B012-1D9CDC88A454} Installer = mysql-essential-5.1.46-win32.msi Upgrade Code = {49EB7A6A-1CEF-4A1E-9E89-B9A4993963E3} Product Code = {9A4DA7EF-A7B9-4282-90AD-10976AA24E69} GUID (for component Installed) = ???? Uninstall Path = HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\{9A4DA7EF-A7B9-4282-90AD-10976AA24E69} Observation from above data: UpgradeCode of a software is constant & is irrespective of its version. ProductCode is version specific & it is used by the MSI internally which is actually reasonable because. MSI allows applications of different versions to be installed side by side. I don't know how to find GUID. MySQL ADO .NET Driver Installer = mysql.data.5.2.5.msi Upgrade Code = --- Product Code = {5FD88490-011C-4DF1-B886-F298D955171B} GUID (for component Installed) = ???? Installer = mysql.data.6.2.2.msi Upgrade Code = --- Product Code = {5FD88490-011C-4DF1-B886-F298D955171B} GUID (for component Installed) = ???? UninstallPath =HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\{5FD88490-011C-4DF1-B886-F298D955171B} Installer = mysql.data.6.2.3.msi Upgrade Code = --- Product Code = {5FD88490-011C-4DF1-B886-F298D955171B} GUID (for component Installed) = ???? Observations from above data: - surprisingly, it couldn't find UpgradeCode from installer of mysql.data.*.msi. I wonder why? This contradicts with my above observation. - ProductCode for all different versions is same here. This again contradicts my above observations. -I still don't know how to find GUID. Now, What exactly are these ProductCode & UpgradeCode & GUID. Which denotes what? Why are above observations contradicting? I don't care about versions. I don't want to depend on Application Name then how do I check if MySQL driver & MySQL ADO .NET. Does detection become simple if they are .NET assemblies? How to do then? I don't want to ship the assemblies with my deployed files.

  Read the article

• Performance surprise with "as" and nullable types

  - by Jon Skeet

  I'm just revising chapter 4 of C# in Depth which deals with nullable types, and I'm adding a section about using the "as" operator, which allows you to write: object o = ...; int? x = o as int?; if (x.HasValue) { ... // Use x.Value in here } I thought this was really neat, and that it could improve performance over the C# 1 equivalent, using "is" followed by a cast - after all, this way we only need to ask for dynamic type checking once, and then a simple value check. This appears not to be the case, however. I've included a sample test app below, which basically sums all the integers within an object array - but the array contains a lot of null references and string references as well as boxed integers. The benchmark measures the code you'd have to use in C# 1, the code using the "as" operator, and just for kicks a LINQ solution. To my astonishment, the C# 1 code is 20 times faster in this case - and even the LINQ code (which I'd have expected to be slower, given the iterators involved) beats the "as" code. Is the .NET implementation of isinst for nullable types just really slow? Is it the additional unbox.any that causes the problem? Is there another explanation for this? At the moment it feels like I'm going to have to include a warning against using this in performance sensitive situations... Results: Cast: 10000000 : 121 As: 10000000 : 2211 LINQ: 10000000 : 2143 Code: using System; using System.Diagnostics; using System.Linq; class Test { const int Size = 30000000; static void Main() { object[] values = new object[Size]; for (int i = 0; i < Size - 2; i += 3) { values[i] = null; values[i+1] = ""; values[i+2] = 1; } FindSumWithCast(values); FindSumWithAs(values); FindSumWithLinq(values); } static void FindSumWithCast(object[] values) { Stopwatch sw = Stopwatch.StartNew(); int sum = 0; foreach (object o in values) { if (o is int) { int x = (int) o; sum += x; } } sw.Stop(); Console.WriteLine("Cast: {0} : {1}", sum, (long) sw.ElapsedMilliseconds); } static void FindSumWithAs(object[] values) { Stopwatch sw = Stopwatch.StartNew(); int sum = 0; foreach (object o in values) { int? x = o as int?; if (x.HasValue) { sum += x.Value; } } sw.Stop(); Console.WriteLine("As: {0} : {1}", sum, (long) sw.ElapsedMilliseconds); } static void FindSumWithLinq(object[] values) { Stopwatch sw = Stopwatch.StartNew(); int sum = values.OfType<int>().Sum(); sw.Stop(); Console.WriteLine("LINQ: {0} : {1}", sum, (long) sw.ElapsedMilliseconds); } }

  Read the article

• How can I get Firefox to update background-color on a:hover *before* a javascript routine is run?

  - by Rob

  I'm having a Firefox-specific issue with a script I wrote to create 3d layouts. The correct behavior is that the script pulls the background-color from an element and then uses that color to draw on the canvas. When a user mouses over a link and the background-color changes to the :hover rule, the color being drawn changes on the canvas changes as well. When the user mouses out, the color should revert back to non-hover color. This works as expected in Webkit browsers and Opera, but it seems like Firefox doesn't update the background-color in CSS immediately after a mouseout event occurs, so the current background-color doesn't get drawn if a mouseout occurs and it isn't followed up by another event that calls the draw() routine. It works just fine in Opera, Chrome, and Safari. How can I get Firefox to cooperate? I'm including the code that I believe is most relevant to my problem. Any advice on how I fix this problem and get a consistent effect would be very helpful. function drawFace(coord, mid, popColor,gs,x1,x2,side) { /*Gradients in our case run either up/down or left right. We have two algorithms depending on whether or not it's a sideways facing piece. Rather than parse the "rgb(r,g,b)" string(popColor) retrieved from elsewhere, it is simply offset with the gs variable to give the illusion that it starts at a darker color.*/ var canvas = document.getElementById('depth'); //This is for excanvas.js var G_vmlCanvasManager; if (G_vmlCanvasManager != undefined) { // ie IE G_vmlCanvasManager.initElement(canvas); } //Init canvas if (canvas.getContext) { var ctx = canvas.getContext('2d'); if (side) var lineargradient=ctx.createLinearGradient(coord[x1][0]+gs,mid[1],mid[0],mid[1]); else var lineargradient=ctx.createLinearGradient(coord[0][0],coord[2][1]+gs,coord[0][0],mid[1]); lineargradient.addColorStop(0,popColor); lineargradient.addColorStop(1,'black'); ctx.fillStyle=lineargradient; ctx.beginPath(); //Draw from one corner to the midpoint, then to the other corner, //and apply a stroke and a fill. ctx.moveTo(coord[x1][0],coord[x1][1]); ctx.lineTo(mid[0],mid[1]); ctx.lineTo(coord[x2][0],coord[x2][1]); ctx.stroke(); ctx.fill(); } } function draw(e) { var arr = new Array() var i = 0; var mid = new Array(2); $(".pop").each(function() { mid[0]=Math.round($(document).width()/2); mid[1]=Math.round($(document).height()/2); arr[arr.length++]=new getElemProperties(this,mid); i++; }); arr.sort(sortByDistance); clearCanvas(); for (a=0;a<i;a++) { /*In the following conditional statements, we're testing to see which direction faces should be drawn, based on a 1-point perspective drawn from the midpoint. In the first statement, we're testing to see if the lower-left hand corner coord[3] is higher on the screen than the midpoint. If so, we set it's gradient starting position to start at a point in space 60pixels higher(-60) than the actual side, and we also declare which corners make up our face, in this case the lower two corners, coord[3], and coord[2].*/ if (arr[a].bottomFace) drawFace(arr[a].coord,mid,arr[a].popColor,-60,3,2); if (arr[a].topFace) drawFace(arr[a].coord,mid,arr[a].popColor,60,0,1); if (arr[a].leftFace) drawFace(arr[a].coord,mid,arr[a].popColor,60,0,3,true); if (arr[a].rightFace) drawFace(arr[a].coord,mid,arr[a].popColor,-60,1,2,true); } } $("a.pop").bind("mouseenter mouseleave focusin focusout",draw); If you need to see the effect in action, or if you want the full javascript code, you can check it out here: http://www.robnixondesigns.com/strangematter/

  Read the article

< Previous Page | 63 64 65 66 67 68 69 70 71 72  | Next Page >