Search Results

Search found 1690 results on 68 pages for 'leopard'.

Page 67/68 | < Previous Page | 63 64 65 66 67 68  | Next Page >

  • Multiple SSL Certificates Running on Mac OS X 10.6

    - by frodosghost.mp
    I have been running into walls with this for a while, so I posted at stackoverflow, and I was pointed over here... I am attempting to setup multiple IP addresses on Snow Leopard so that I can develop with SSL certificates. I am running XAMPP - I don't know if that is the problem, but I guess I would run into the same problems, considering the built in apache is turned off. So first up I looked into starting up the IPs on start up. I got up an running with a new StartupItem that runs correctly, because I can ping the ip address: ping 127.0.0.2 ping 127.0.0.1 And both of them work. So now I have IP addresses, which as you may know are not standard on OSx. I edited the /etc/hosts file to include the new sites too: 127.0.0.1 site1.local 127.0.0.2 site2.local I had already changed the httpd.conf to use the httpd-vhosts.conf - because I had a few sites running on the one IP address. I have edited the vhosts file so a site looks like this: <VirtualHost 127.0.0.1:80> DocumentRoot "/Users/jim/Documents/Projects/site1/web" ServerName site1.local <Directory "/Users/jim/Documents/Projects/site1"> Order deny,allow Deny from All Allow from 127.0.0.1 AllowOverride All </Directory> </VirtualHost> <VirtualHost 127.0.0.1:443> DocumentRoot "/Users/jim/Documents/Projects/site1/web" ServerName site1.local SSLEngine On SSLCertificateFile "/Applications/XAMPP/etc/ssl-certs/myssl.crt" SSLCertificateKeyFile "/Applications/XAMPP/etc/ssl-certs/myssl.key" SetEnvIf User-Agent ".*MSIE.*" nokeepalive ssl-unclean-shutdown <Directory "/Users/jim/Documents/Projects/site1"> Order deny,allow Deny from All Allow from 127.0.0.1 AllowOverride All </Directory> </VirtualHost> In the above code, you can change the 1's to 2's and it is the setup for the second site. They do use the same certificate, which is why they are on different IP addresses. I also included the NameVirtualHost information at the top of the file: NameVirtualHost 127.0.0.1:80 NameVirtualHost 127.0.0.2:80 NameVirtualHost 127.0.0.1:443 NameVirtualHost 127.0.0.2:443 I can ping site1.local and site2.local. I can use telnet ( telnet site2.local 80 ) to get into both sites. But in Safari I can only get to the first site1.local - navigating to site2.local gives me either the localhost main page (which is included in the vhosts) or gives me a Access forbidden!. I am usure what to do, any suggestions would be awesome.

    Read the article

  • How to enjoy DVD on Apple iPad

    - by user44251
    I believe many people spent a sleepless night yesterday waiting for the new Apple Tablet to come, just a few days ago or perhaps longer I noticed fierce debate about it, its name, size, capacity, processor, main features, price etc. And now, they can take a long breath with the new Apple Tablet named iPad officially released on 28, January, 2010 (Beijing Time). But I know a new battle just begins. iPad, sounds somewhat like iPod and it really shares some similarities in terms of shape like smart, light and portable. It has a 9.7-inch, LED-backlit, IPS display with a remarkable precise Multi-Touch screen. And yet, at just 1.5 lbs and 0.5 inches thin, it's easy to carry and use everywhere. It can greatly facilitates your experience with the web, emails, photos and videos. Right now, it can run almost 140.000 of the apps on the Apple store. It can even run the apps you have downloaded for your iPhone or iPod touch. But so far, I haven't seen any possibility that it can work with DVD, probability there is no built-in DVD-ROM or DVD player which can play DVD directly. As Apple iPad states, the video formats supported are MPEG-4 (MP4, M4V), H.264, MOV etc and audio formats accepted are AAC, Proteceted AAC, MP3, AIFF and WAV etc, those are formats that are commonly used with iMac. This could really a hard nut to crack if you want to watch your favourite DVD on this magic Apple iPad. But don't worry, there is still way out, you just need a few steps for ripping and importing DVD movies to Apple iPad with a simple application DVD to iPad converter What's on DVD to iPad Converter for Mac DVD to iPad converter for Mac is a powerful and professional application designed for the newly released Apple iPad which can rip, convert your DVD contents to Apple iPad compatible MPEG-4 (MP4, M4V), H.264, MOV etc, and other popular file formats like AVI, WMV, MPG, MKV, VOB, 3GP, FLV etc can also be converted so that you can put on your portable devices like iPod, iPhone, iRiver, BlackBerry etc. Besides, it can also extract audio from DVD videos and save as MP3, AIFF, AAC, WAV etc. Mac DVD to iPad converter has also been enhanced that can run both on PowerPC and Intel (Snow Leopard included). It can offer versatile editing features which allows you to make your own DVD videos. For example, you can cut your DVD to whatever length you like by Trim, crop off unwanted parts from DVD clips by Crop, add special effect like Gray, Emboss and Old film to make your videos more artistic. Besides, its built-in merging feature and batch mode allows you to join several DVD clips into a single one and do batch conversion. And more features can be expected if you afford a few minutes to try.

    Read the article

  • Multiple SSL Certificates Running on Mac OS X 10.6

    I have been running into walls with this for a while, so I posted at stackoverflow, and I was pointed over here... I am attempting to setup multiple IP addresses on Snow Leopard so that I can develop with SSL certificates. I am running XAMPP - I don't know if that is the problem, but I guess I would run into the same problems, considering the built in apache is turned off. So first up I looked into starting up the IPs on start up. I got up an running with a new StartupItem that runs correctly, because I can ping the ip address: ping 127.0.0.2 ping 127.0.0.1 And both of them work. So now I have IP addresses, which as you may know are not standard on OSx. I edited the /etc/hosts file to include the new sites too: 127.0.0.1 site1.local 127.0.0.2 site2.local I had already changed the httpd.conf to use the httpd-vhosts.conf - because I had a few sites running on the one IP address. I have edited the vhosts file so a site looks like this: <VirtualHost 127.0.0.1:80> DocumentRoot "/Users/jim/Documents/Projects/site1/web" ServerName site1.local <Directory "/Users/jim/Documents/Projects/site1"> Order deny,allow Deny from All Allow from 127.0.0.1 AllowOverride All </Directory> </VirtualHost> <VirtualHost 127.0.0.1:443> DocumentRoot "/Users/jim/Documents/Projects/site1/web" ServerName site1.local SSLEngine On SSLCertificateFile "/Applications/XAMPP/etc/ssl-certs/myssl.crt" SSLCertificateKeyFile "/Applications/XAMPP/etc/ssl-certs/myssl.key" SetEnvIf User-Agent ".*MSIE.*" nokeepalive ssl-unclean-shutdown <Directory "/Users/jim/Documents/Projects/site1"> Order deny,allow Deny from All Allow from 127.0.0.1 AllowOverride All </Directory> </VirtualHost> In the above code, you can change the 1's to 2's and it is the setup for the second site. They do use the same certificate, which is why they are on different IP addresses. I also included the NameVirtualHost information at the top of the file: NameVirtualHost 127.0.0.1:80 NameVirtualHost 127.0.0.2:80 NameVirtualHost 127.0.0.1:443 NameVirtualHost 127.0.0.2:443 I can ping site1.local and site2.local. I can use telnet ( telnet site2.local 80 ) to get into both sites. But in Safari I can only get to the first site1.local - navigating to site2.local gives me either the localhost main page (which is included in the vhosts) or gives me a Access forbidden!. I am usure what to do, any suggestions would be awesome.

    Read the article

  • Quicktips 1: Windows 7 Libraries; New website

    - by Michael B. McLaughlin
    I’m working on several large posts right now. So in the interim, I’ve decided to do shorter posts that contain something I find very helpful. This is the first. I’ve been using Windows 7 since April 2010. It’s the first OS I’ve ever worked with that I actually enjoy. I’ve used many over the years (KERNAL; PC DOS; MS-DOS 3.x+; Windows 3.0, 3.11, 95, 98, 98 SE, Me, NT 3.51, NT 4, 2000, XP, Vista, 7; various GNU/Linux distros starting with Debian 1.2 – most recently Ubuntu 10.04; ProDOS, Mac OS 9.X, Mac OS X (through 10.4); SunOS, Solaris; AIX, z/OS; OpenVMS). Some were frustrating. Some tolerable. Some were “nice except for…”. OS X actually started out as seemingly “nice” until every single release contained a breaking change to some major API and they then decided to flip-off everyone who had bought a Mac as little as two years earlier with the release of Snow Leopard without PPC support. Windows 7 is the first one that’s just “nice” without any qualifiers. There are so many little features that add up to make it nice. Today’s Quicktip is one of them. Quicktip 1: Create a Library for your Code One thing I particularly like about Windows 7 is the Libraries feature in Explorer. Specifically the fact that you can create custom ones. I used to spend a lot of time opening new Explorer windows and navigating my various Visual Studio projects folders. Custom libraries allowed me to simplify that whole process. I now simply go to my “Code” library and there it all is. Adding a new library is easy. Open an Explorer window. If you aren’t in your Libraries when it opens, navigate to Libraries. Click the “New library” button. Give it a name. Then right click on the new library you created and go to “Properties”. Click the “Include a folder…” button. Choose the folder you want and press “Include folder”. Voilà! If you wish to add more, simply click “Include a folder…” again and repeat. It’s true that this is just a small time saver. But it’s one of those things that just adds a really nice touch. ------------------------ In a separate note, just before Christmas I finally finished and published my new website: http://www.bobtacoindustries.com/ . I waited to post here about it until I found time to incorporate a few things I hadn’t had the time to do when I pushed it out for its “soft open”. Most of them are now done and so my site is now formally open. I have no plans or intentions of moving my blog ( http://blog.bobtacoindustries.com/ points here). I quite like it here, both in terms of the interface and also in terms of the concept (and realization thereof) of pooling geek bloggers to create a pool of knowledge and helpful tips, tricks, techniques, and advice. I created it simply because I felt that it was time to have a website as I venture further into my return to the land of software development. The “For Devs” section should hopefully be useful to developers, particularly the links section. It’s my curated list of sites that I regularly visit to solve problems, to help answer questions on Twitter and the AppHub forums, and to learn new things. I’ll be adding links to it periodically and will be including topic areas as I become acquainted with them enough to form a proper list. WPF will likely be the first topic area added. If there are any links you think I should add to the existing topics, let me know! I warn in advance that I’m less inclined to add blogs; there are simply too many good blogs and I do not want to have hundreds per topic area. So blogs are limited primarily, though not exclusively, to acknowledged experts in the subject area who generally blog regularly about it and who usually are part of the team that develops the product or technology in question. I’m much more amenable to including individual blogs posts in the techniques subcategory in the appropriate topic area. Ultimately, it’s a collection of things I find interesting and helpful. So please no hard feelings if I don’t add a link you think is awesome. I may well think it’s awesome too, but conclude that it doesn’t fit with my goals for the dev links area.

    Read the article

  • Blocking access to websites with objective-C / root privileges in objective-C

    - by kvaruni
    I am writing a program in Objective-C (XCode 3.2, on Snow Leopard) that is capable of either selectively blocking certain sites for a duration or only allow certain sites (and thus block all others) for a duration. The reasoning behind this program is rather simple. I tend to get distracted when I have full internet access, but I do need internet access during my working hours to get to a number of work-related websites. Clearly, this is not a permanent block, but only helps me to focus whenever I find myself wandering a bit too much. At the moment, I am using a Unix script that is called via AppleScript to obtain Administrator permissions. It then activates a number of ipfw rules and clears those after a specific duration to restore full internet access. Simple and effective, but since I am running as a standard user, it gets cumbersome to enter my administrator password each and every time I want to go "offline". Furthermore, this is a great opportunity to learn to work with XCode and Objective-C. At the moment, everything works as expected, minus the actual blocking. I can add a number of sites in a list, specify whether or not I want to block or allow these websites and I can "start" the blocking by specifying a time until which I want to stay "offline". However, I find it hard to obtain clear information on how I can run a privileged Unix command from Objective-C. Ideally, I would like to be able to store information with respect to the Administrator account into the Keychain to use these later on, so that I can simply move into "offline" mode with the convenience of clicking a button. Even more ideally, there might be some class in Objective-C with which I can block access to some/all websites for this particular user without needing to rely on privileged Unix commands. A third possibility is in starting this program with root permissions and the reducing the permissions until I need them, but since this is a GUI application that is nested in the menu bar of OS X, the results are rather awkward and getting it to run each and every time with root permission is no easy task. Anyone who can offer me some pointers or advice? Please, no security-warnings, I am fully aware that what I want to do is a potential security threat.

    Read the article

  • getting autodiscover URL from Exchange email address

    - by Anthony
    I'm starting with an address for an Exchange 2007 server: [email protected] And I attempted to send an autodiscover request, as documented at MSDN. I attempted to use the generic autodiscover address documented at the TechNet White Paper. So, using curl on PHP, I sent the following request: <Autodiscover xmlns="http://schemas.microsoft.com/exchange/autodiscover/outlook/requestschema/2006"> <Request> <EMailAddress>[email protected]</EMailAddress> <AcceptableResponseSchema> http://schemas.microsoft.com/exchange/autodiscover/outlook/responseschema/2006a </AcceptableResponseSchema> </Request> </Autodiscover> to the following URL: https://domain.exchangeserver.org/autodiscover/autodiscover.xml But got no response, just an eventual timeout. I also tried: https://autodiscover.domain.exchangeserver.org/autodiscover/autodiscover.xml With the same result. Now, since my larger goal is to use Autodiscover with Exchange Web Services, and since all of the EWS URLs start with the same sub-domain as the Outlook Web Access address, I thought I'd give that a try: OWA: https://wmail.domain.exchangeserver.org So I tried: https://wmail.domain.exchangeserver.org/autodiscover/autodiscover.xml And sure enough, I got back the expected response. However, I only knew the OWA sub-domain because it's the server I have access to and that I'm using to test everything. I would not know it for sure or be able to guess it if this were a live app and the user was entering in their own Exchange email. I know that whatever generic autodiscover settings must be turned on, because I can enter: [email protected] into Apple Mail on Snow Leopard and it finds everything without trouble. So the question is... Should https://domain.exchangeserver.org/autodiscover/autodiscover.xml have worked, and I just missed a step when trying to connect to it? Or, Is there some trick (maybe involving pinging the email address?) that Apple Mail and other clients use to resolve the address to the OWA subdomain before sending the autodiscover request? Thanks to anyone who knows or can take a wild guess.

    Read the article

  • Landscape orientation for UITabBarController?

    - by gingersnap
    The UITabBarController does not allow landscape orientation. So I used a subclass of UITabBarContoller (called RotatingTabBarController). Its sole purpose it to allow rotation by returning YES to shouldAutorotateToInterfaceOrientation call. The problem is that when you rotate the iPhone in simulator it gives the following malloc error. malloc: *** error for object 0x3888000: pointer being freed was not allocated *** set a breakpoint in malloc_error_break to debug I am using 3.0 SDK with Xcode 3.2 on Snow Leopard. I set a breakpoint in malloc_error_break but I can not trace it back to my code. Is there something I can do to make this error go away? Here is the RotatingTabBarController class: #import <UIKit/UIKit.h> @interface RotatingTabBarController : UITabBarController { } @end @implementation RotatingTabBarController -(BOOL)shouldAutorotateToInterfaceOrientation:UIInterfaceOrientation)interfaceOrientation { return YES; } @end Update: I tried the same with a category. But it gives the same malloc error. // UITabBarController+Rotation.h @interface UITabBarController (rotation) - (BOOL)shouldAutorotateToInterfaceOrientation:(UIInterfaceOrientation)interfaceOrientation; @end // UITabBarController+Rotation.m #import "UITabBarController+Rotation.h" @implementation UITabBarController (rotation) - (BOOL)shouldAutorotateToInterfaceOrientation:(UIInterfaceOrientation)interfaceOrientation { return YES; } @end Backtrace [Session started at 2009-09-05 12:13:19 -0400.] Untitled(992,0xa06d9500) malloc: *** error for object 0x2024000: pointer being freed was not allocated *** set a breakpoint in malloc_error_break to debug Untitled(992,0xa06d9500) malloc: *** error for object 0x2014000: pointer being freed was not allocated *** set a breakpoint in malloc_error_break to debug [Session started at 2009-09-05 12:13:27 -0400.] GNU gdb 6.3.50-20050815 (Apple version gdb-1344) (Fri Jul 3 01:19:56 UTC 2009) Copyright 2004 Free Software Foundation, Inc. GDB is free software, covered by the GNU General Public License, and you are welcome to change it and/or distribute copies of it under certain conditions. Type "show copying" to see the conditions. There is absolutely no warranty for GDB. Type "show warranty" for details. This GDB was configured as "x86_64-apple-darwin".Attaching to process 992. sharedlibrary apply-load-rules all (gdb) bt #0 0x951908fa in mach_msg_trap () #1 0x95191067 in mach_msg () #2 0x30244d62 in CFRunLoopRunSpecific () #3 0x30244628 in CFRunLoopRunInMode () #4 0x32044c31 in GSEventRunModal () #5 0x32044cf6 in GSEventRun () #6 0x309021ee in UIApplicationMain () #7 0x00002608 in main (argc=1, argv=0xbfffef94) at /Users/vishwas/Desktop/Untitled/main.m:13 (gdb)

    Read the article

  • Jquery tools Overlay CSS Conflict, Image positioned under the overlay

    - by Ami Mahloof
    First here's what I'm usingh and trying to do: the minimal setup for this effect: flowplayer.org/tools/demos/overlay/index.html then the Apple Leopard Preview Effect: flowplayer.org/tools/demos/overlay/apple.html Now here's the page I'm having the issue with http://gentle-mist-64.heroku.com/pictures My Issue: when I click on an image the picture shows under the overlay and to the right side, This has to be a conflict between my CSS positioning to the the plugin positioning. when I try this on a blank page with no layout, it works just fine. my layout css: body{ background: url('/images/background.jpg'); } #image_stage{ position: relative; top: 30px; margin: auto; margin-top: 75px; background-color: white; width: 900px; height: 520px; } #image_inside_stage { float: left; margin-top: 7px; margin-left: 27px; } #logo{ position: absolute; left: 725px; top: 4px; } #see_through_box { position: absolute; background-color: black; opacity: 0.66; -moz-opacity: 0.66; filter:alpha(opacity=66); width: 665px; height: 432px; margin: 45px; z-index: 99; -moz-border-radius-topleft: 15px; -moz-border-radius-topright: 0; -moz-border-radius-bottomleft: 0; -moz-border-radius-bottomright: 15px; -webkit-border-top-left-radius: 15px; -webkit-border-top-right-radius: 0; -webkit-border-bottom-left-radius: 0; -webkit-border-bottom-right-radius: 15px; } .inner_content{ position: absolute; top: 75px; left: 75px; z-index: 99; color: whitesmoke; } Anyone Please Help, I want this plugin to work, this is so much better then just a light box plugin, I have used the plugin acros my entire website and would like to keep on using it. I Appreciate any input Thanks Ami

    Read the article

  • OSX/Darwin unresolved symbols when linking functions from <math.h>

    - by tbone
    I'm in the process of porting a large'ish (~1M LOC) project from a Window/Visual Studio environment to other platforms, the first of which happens to be Mac OS X. Originally the project was configured as Visual Studio solutions and projects, but now I'm using (the excellent) Premake (http://industriousone.com/premake) to generate project files for multiple platforms (VS, XCode, GMake). I configured, ported and built the first few projects without any significant problems, but having ported the math lib, I ran into this weird linking error that I haven't been able to resolve: Any functions used from math.h will fail to link (causing unresolved symbols). For reference, I'm using Premake v4.2.1 to generate projects for XCode v3.2.1, which is building using gcc v4.2 for the x86_64 architecture. (All this on 64-bit Snow Leopard) I've tried to persuade gcc to link and build everything against a 'known' SDK by adding -isysroot /Developer/SDKs/MacOSX10.6.sdk -mmacosx-version-min=10.6 to the build command line. Now under normal circumstances, adding -lm should take care of this, however in Darwin, those math libs are included in libSystem, which, as far as I can tell, gets implicitly linked by gcc/ld. I've tried creating a dummy project from within XCode which just runs: float f = log2(2.0)+log2f(3.f)+log1p(1.1)+log1pf(1.2f)+sin(8.0); std::cout << f << std::endl; and as expected, this builds just fine. However, if I put the same thing in the code inside the Premake generated project, all those math functions end up unresolved. Now comparing the linking command from the 'native' XCode project with my generated XCode project, they seem pretty identical (except that my generated project links other libs as well). 'Native' project: /Developer/usr/bin/g++-4.2 -arch x86_64 -dynamiclib -isysroot /Developer/SDKs/MacOSX10.6.sdk -Lsomepath -Fsomepath -filelist somefile -install_name somename -mmacosx-version-min=10.6 -single_module -compatibility_version 1 -current_version 1 -o somename Generated project: /Developer/usr/bin/g++-4.2 -arch x86_64 -dynamiclib -Lsomepath -Fsomepath -filelist somefile -install_name somename -isysroot /Developer/SDKs/MacOSX10.6.sdk -mmacosx-version-min=10.6 somelib.a somelib2.a somelib.dylib somelib2.dylib -single_module -compatibility_version 1 -current_version 1 -o somename Any help or hints about how to proceed would be most appreciated. Are there any gcc flags or other tools that can help me resolve this?

    Read the article

  • how to store xml structure in a persistence layer?

    - by fayer
    i wonder how i could store a xml structure in a persistence layer. cause the relational data looks like: <entity id="1000070"> <name>apple</name> <entities> <entity id="7002870"> <name>mac</name> <entities> <entity id="7002907"> <name>leopard</name> <entities> <entity id="7024080"> <name>safari</name> </entity> <entity id="7024701"> <name>finder</name> </entity> </entities> </entity> </entities> </entity> <entity id="7024080"> <name>iphone</name> <entities> <entity id="7024080"> <name>3g</name> </entity> <entity id="7024701"> <name>3gs</name> </entity> </entities> </entity> <entity id="7024080"> <name>ipad</name> </entity> </entities> </entity> as you can see, it has no static structure but a dynamical one. mac got 2 descendant levels while iphone got 1 and ipad got 0. i wonder how i could store this data the best way? what are my options. cause it seems impossible to store it in a mysql database due to this dynamical structure. is the only way to store it as a xml file then? is the speed of getting information (xpath/xquery/simplexml) from a xml file worse or greater than from mysql? what are the pros and cons? do i have other options? is storing information in xml files, suited for a lot of users accessing it at the same time? would be great with feedbacks!! thanks!

    Read the article

  • How to run an application as root without asking for an admin password?

    - by kvaruni
    I am writing a program in Objective-C (XCode 3.2, on Snow Leopard) that is capable of either selectively blocking certain sites for a duration or only allow certain sites (and thus block all others) for a duration. The reasoning behind this program is rather simple. I tend to get distracted when I have full internet access, but I do need internet access during my working hours to get to a number of work-related websites. Clearly, this is not a permanent block, but only helps me to focus whenever I find myself wandering a bit too much. At the moment, I am using a Unix script that is called via AppleScript to obtain Administrator permissions. It then activates a number of ipfw rules and clears those after a specific duration to restore full internet access. Simple and effective, but since I am running as a standard user, it gets cumbersome to enter my administrator password each and every time I want to go "offline". Furthermore, this is a great opportunity to learn to work with XCode and Objective-C. At the moment, everything works as expected, minus the actual blocking. I can add a number of sites in a list, specify whether or not I want to block or allow these websites and I can "start" the blocking by specifying a time until which I want to stay "offline". However, I find it hard to obtain clear information on how I can run a privileged Unix command from Objective-C. Ideally, I would like to be able to store information with respect to the Administrator account into the Keychain to use these later on, so that I can simply move into "offline" mode with the convenience of clicking a button. Even more ideally, there might be some class in Objective-C with which I can block access to some/all websites for this particular user without needing to rely on privileged Unix commands. A third possibility is in starting this program with root permissions and the reducing the permissions until I need them, but since this is a GUI application that is nested in the menu bar of OS X, the results are rather awkward and getting it to run each and every time with root permission is no easy task. Anyone who can offer me some pointers or advice? Please, no security-warnings, I am fully aware that what I want to do is a potential security threat.

    Read the article

  • Start a short video when an incoming call is detected, first case using the emulator.

    - by Emanuel
    I want to be able to start a short video on an incoming phone call. The video will loop until the call is answered. I've loaded the video onto the emulator sdcard then created the appropriate level avd with a path to the sdcard.iso file on disk. Since I'm running on a Mac OS x snow leopard I am able to confirm the contents of the sdcard. All testing has be done on the Android emulator. In a separate project TestVideo I created an activity that just launches the video from the sdcard. That works as expected. Then I created another project TestIncoming that creates an activity that creates a PhoneStateListener that overrides the onCallStateChanged(int state, String incomingNumber) method. In the onCallStateChanged() method I check if state == TelephonyManager.CALL_STATE_RINGING. If true I create an Intent that starts the video. I'm actually using the code from the TestVideo project above. Here is the code snippet. PhoneStateListener callStateListener = new PhoneStateListener() { @Override public void onCallStateChanged(int state, String incomingNumber) { if(state == TelelphonyManager.CALL_STATE_RINGING) { Intent launchVideo = new Intent(MyActivity.this, LaunchVideo.class); startActivity(launchVideo); } } }; The PhoneStateListener is added to the TelephonyManager.listen() method like so, telephonyManager.listen(callStateListener, PhoneStateListener.LISTEN_CALL_STATE); Here is the part I'm unclear on, the manifest. What I've tried is the following: <?xml version="1.0" encoding="utf-8"?> <manifest xmlns:android="http://schemas.android.com/apk/res/android" package="com.example.incomingdemo" android:versionCode="1" android:versionName="1.0"> <application android:icon="@drawable/icon" android:label="@string/app_name"> <activity android:name=".IncomingVideoDemo" android:label="@string/app_name"> <intent-filter> <action android:name="android.intent.action.ANSWER" /> <category android:name="android.intent.category.DEFAULT" /> </intent-filter> </activity> <activity android:name=".LaunchVideo" android:label="LaunchVideo"> </activity> </application> <uses-sdk android:minSdkVersion="2" /> <uses-permission android:name="android.permission.READ_PHONE_STATE"/> </manifest> I've run the debugger after setting breakpoints in the IncomingVideoDemo activity where the PhoneStateListener is created and none of the breakpoints are hit. Any insights into solving this problem is greatly appreciated. Thanks.

    Read the article

  • Wrong sessionID being used in callback, but only on one particular computer

    - by user210119
    I am writing a Python/Django web application that uses OAuth (for the TwitterAPI, not that it should matter). I am storing a session ID in my login function, and then after using OAuth to get the user's token, I try to retrieve the sessionID in my callback function. The callback function then always fails(throws an exception) because it can't find the OAuth token in the session. Through the debugger, I am able to determine that the session ID that the server is using is incorrect - it does not match the session ID that was stored in the login function. It's therefore unsurprising that the Oauth tokens were not there. The session that appears in the callback was the same one each time (until I tried deleting it - see "things I've tried below"), and it started out as an old session, with some data in it that is from a different django app running on the same server that I hadn't touched in a couple weeks. Here's the kicker: everything I described is an issue only on our production server, and only when connecting to it from my computer. Let me clarify: this only happens with my particular laptop. I can connect to the app just fine from someone else's computer. Other people cannot connect with their accounts on my computer. Furthmore, I can connect just fine to the app when it is running on my localhost using the built-in django webserver, just not to the production server. My setup: my server and local box are running= Django 1.2.0 and Python 2.6.5. My local box is running Snow Leopard and the Django webserver, the server is running Ubuntu, Apache2, and mod-wsgi. For sessions, I am using Django's default session backend (DB). Things I have tried, all to no avail: logging in with a different account, including new accounts that have never OAuthed to this app before Clearing cookies, using incognito mode, using a different web browser on my same computer. Each time, upon inspecting my cookies, the sessionID matched the sessionID in the login function and was different from the sessionID in the callback. deleting the session in the database that appears in the callback function, (the one that appeared to be old data). The callback function still fails, and the sessionID it appears to be using is now a new one using a different session backend (DB-cache, flat file, etc...) restarting the server, my computer, etc. My first question on StackOverflow, so bear with me if I didn't quite follow local conventions. I am just at a loss as to what to even look for - what are the things that could possibly be causing sessions to not work on my particular computer, and (so far!) only my particular computer?

    Read the article

  • help with selecting nodes with xpath

    - by fayer
    my xml structure looks like this: <entity id="1000070"> <name>apple</name> <type>category</type> <entities> <entity id="7002870"> <name>mac</name> <type>category</type> <entities> <entity id="7002907"> <name>leopard</name> <type>sub-category</type> <entities> <entity id="7024080"> <name>safari</name> <type>subject</type> </entity> <entity id="7024701"> <name>finder</name> <type>subject</type> </entity> </entities> </entity> </entities> </entity> <entity id="7024080"> <name>iphone</name> <type>category</type> <entities> <entity id="7024080"> <name>3g</name> <type>sub-category</type> </entity> <entity id="7024701"> <name>3gs</name> <type>sub-category</type> </entity> </entities> </entity> <entity id="7024080"> <name>ipad</name> <type>category</type> </entity> </entities> </entity> currently i have selected all entities with type node that is not category. $xmlDocument-removeNodes("//entity[not(type='category')]") i wonder how i could select all nodes that dont contain type=category OR type=sub-category. i have tried with: $xmlDocument->removeNodes("//entity[not(type='category')] | //entity[not(type='sub-category')]") but it doesnt work!

    Read the article

  • How to close all, or only some, tabs in Safari using AppleScript?

    - by Form
    I have made a very simple AppleScript to close all tabs in Safari. The problem is, it works, but not completely. The problem is that only a couple of tabs are closed. Here's the code: tell application "Safari" repeat with aWindow in windows repeat with aTab in tabs of aWindow if [some condition is encountered] then aTab close end if end repeat end repeat end tell I've also tried this script: tell application "Safari" repeat with i from 0 to the number of items in windows set aWindow to item i of windows repeat with j from 0 to the number of tabs in aWindow set aTab to item j of tabs of aWindow if [some condition is encountered] then aTab close end if end repeat end repeat end tell ... but it does not work either (same behavior). I tried that on my system (MacBook Pro jan 2008), as well as on a Mac Pro G5 under Tiger and the script fails on both, albeit with a much less descriptive error on Tiger. Running the script a few times closes a few tab each time until none is left, but always fails with the same error after closing a few tabs. Under Leopard I get an out of bounds error. Since I am using fast enumeration (not using "repeat from 0 to number of items in windows") I don't see how I can get an out of bounds error with this... My goal is to use the Cocoa Scripting Bridge to close tabs in Safari from my Objective-C Cocoa application but the Scripting Bridge fails in the same manner. The non-deletable tabs show as NULL in the Xcode debugger, while the other tabs are valid objects from which I can get values back (such as their title). In fact I tried with the Scripting Bridge first then told myself why not try this directly in AppleScript and I was surprised to see the same results. I must have a glaring omission or something in there... (seems like a bug in Safari AppleScript support to me... :S) I've used repeat loops and Obj-C 2.0 fast enumeration to iterate through collections before with zero problems, so I really don't see what's wrong here. Anyone can help? Thanks in advance!

    Read the article

  • Why is this mod_rewrite RewriteRule directive not working in the .htaccess file?

    - by morgant
    I've got a site that was hosted on a linux el cheapo hosting service that I'm migrating to my Mac OS X 10.5 Leopard Server server running Apache 2.2.8 & PHP 5.2.5 w/rewrite_module enabled and AllowOverride All, but I'm running into an issue with the following lines in the .htaccess file: RewriteEngine On #RewriteRule ^view/([^/\.]+)/?$ /view.php?item=$1 [L] #RewriteRule ^order/([^/\.]+)/?$ /order.php?item=$1 [L] RewriteRule ^category/([^/\.]+)/?$ /category.php?category=$1 [L] As you can see, I've commented out the RewriteRule directives for /view/ and /order/, so I'm only dealing with /category/. When I attempt to load http://domain.tld/category/2/ it runs category.php (I've added debug code to confirm), but $_SERVER['REQUEST_URI'] comes through as /category/2/ and $_GET['category'] comes through as empty. I'm usually fine with troubleshooting .htaccess files and mod_rewrite directives, but this one's got me stumped for some reason. Update: I followed Josh's suggestion and here's the what's dumped to mod_rewrite.log when I try to access http://domain.tld/category/2/: 65.19.81.253 - - [22/Oct/2009:17:31:53 --0400] [domain.tld/sid#100aae0b0][rid#100b5ea98/initial] (2) init rewrite engine with requested uri /category/13 65.19.81.253 - - [22/Oct/2009:17:31:53 --0400] [domain.tld/sid#100aae0b0][rid#100b5ea98/initial] (3) applying pattern '.*' to uri '/category/13' 65.19.81.253 - - [22/Oct/2009:17:31:53 --0400] [domain.tld/sid#100aae0b0][rid#100b5ea98/initial] (1) pass through /category/13 65.19.81.253 - - [22/Oct/2009:17:31:53 --0400] [domain.tld/sid#100aae0b0][rid#100b6aa98/subreq] (3) [perdir /Library/WebServer/Documents/tld.domain.www/] add path info postfix: /Library/WebServer/Documents/tld.domain.www/category.php -> /Library/WebServer/Documents/tld.domain.www/category.php/13 65.19.81.253 - - [22/Oct/2009:17:31:53 --0400] [domain.tld/sid#100aae0b0][rid#100b6aa98/subreq] (3) [perdir /Library/WebServer/Documents/tld.domain.www/] strip per-dir prefix: /Library/WebServer/Documents/tld.domain.www/category.php/13 -> category.php/13 65.19.81.253 - - [22/Oct/2009:17:31:53 --0400] [domain.tld/sid#100aae0b0][rid#100b6aa98/subreq] (3) [perdir /Library/WebServer/Documents/tld.domain.www/] applying pattern '^category/([^/\.]+)/?$' to uri 'category.php/13' 65.19.81.253 - - [22/Oct/2009:17:31:53 --0400] [domain.tld/sid#100aae0b0][rid#100b6aa98/subreq] (1) [perdir /Library/WebServer/Documents/tld.domain.www/] pass through /Library/WebServer/Documents/tld.domain.www/category.php 65.19.81.253 - - [22/Oct/2009:17:31:53 --0400] [domain.tld/sid#100aae0b0][rid#100b5ea98/initial] (3) [perdir /Library/WebServer/Documents/tld.domain.www/] add path info postfix: /Library/WebServer/Documents/tld.domain.www/category.php -> /Library/WebServer/Documents/tld.domain.www/category.php/13 65.19.81.253 - - [22/Oct/2009:17:31:53 --0400] [domain.tld/sid#100aae0b0][rid#100b5ea98/initial] (3) [perdir /Library/WebServer/Documents/tld.domain.www/] strip per-dir prefix: /Library/WebServer/Documents/tld.domain.www/category.php/13 -> category.php/13 65.19.81.253 - - [22/Oct/2009:17:31:53 --0400] [domain.tld/sid#100aae0b0][rid#100b5ea98/initial] (3) [perdir /Library/WebServer/Documents/tld.domain.www/] applying pattern '^category/([^/\.]+)/?$' to uri 'category.php/13' 65.19.81.253 - - [22/Oct/2009:17:31:53 --0400] [domain.tld/sid#100aae0b0][rid#100b5ea98/initial] (1) [perdir /Library/WebServer/Documents/tld.domain.www/] pass through /Library/WebServer/Documents/tld.domain.www/category.php 65.19.81.253 - - [22/Oct/2009:17:31:53 --0400] [domain.tld/sid#100aae0b0][rid#100b6ea98/subreq] (2) init rewrite engine with requested uri /13 65.19.81.253 - - [22/Oct/2009:17:31:53 --0400] [domain.tld/sid#100aae0b0][rid#100b6ea98/subreq] (3) applying pattern '.*' to uri '/13' 65.19.81.253 - - [22/Oct/2009:17:31:53 --0400] [domain.tld/sid#100aae0b0][rid#100b6ea98/subreq] (1) pass through /13 65.19.81.253 - - [22/Oct/2009:17:31:53 --0400] [domain.tld/sid#100aae0b0][rid#100b6ea98/subreq] (3) [perdir /Library/WebServer/Documents/tld.domain.www/] strip per-dir prefix: /Library/WebServer/Documents/tld.domain.www/13 -> 13 65.19.81.253 - - [22/Oct/2009:17:31:53 --0400] [domain.tld/sid#100aae0b0][rid#100b6ea98/subreq] (3) [perdir /Library/WebServer/Documents/tld.domain.www/] applying pattern '^category/([^/\.]+)/?$' to uri '13' 65.19.81.253 - - [22/Oct/2009:17:31:53 --0400] [domain.tld/sid#100aae0b0][rid#100b6ea98/subreq] (1) [perdir /Library/WebServer/Documents/tld.domain.www/] pass through /Library/WebServer/Documents/tld.domain.www/13

    Read the article

  • Why is this mod_rewrite RewriteRule directive not working in the .htaccess file?

    - by morgant
    I've got a site that was hosted on a linux el cheapo hosting service that I'm migrating to my Mac OS X 10.5 Leopard Server server running Apache 2.2.8 & PHP 5.2.5 w/rewrite_module enabled and AllowOverride All, but I'm running into an issue with the following lines in the .htaccess file: RewriteEngine On #RewriteRule ^view/([^/\.]+)/?$ /view.php?item=$1 [L] #RewriteRule ^order/([^/\.]+)/?$ /order.php?item=$1 [L] RewriteRule ^category/([^/\.]+)/?$ /category.php?category=$1 [L] As you can see, I've commented out the RewriteRule directives for /view/ and /order/, so I'm only dealing with /category/. When I attempt to load http://domain.tld/category/2/ it runs category.php (I've added debug code to confirm), but $_SERVER['REQUEST_URI'] comes through as /category/2/ and $_GET['category'] comes through as empty. I'm usually fine with troubleshooting .htaccess files and mod_rewrite directives, but this one's got me stumped for some reason. Update: I followed Josh's suggestion and here's the what's dumped to mod_rewrite.log when I try to access http://domain.tld/category/2/: 65.19.81.253 - - [22/Oct/2009:17:31:53 --0400] [domain.tld/sid#100aae0b0][rid#100b5ea98/initial] (2) init rewrite engine with requested uri /category/13 65.19.81.253 - - [22/Oct/2009:17:31:53 --0400] [domain.tld/sid#100aae0b0][rid#100b5ea98/initial] (3) applying pattern '.*' to uri '/category/13' 65.19.81.253 - - [22/Oct/2009:17:31:53 --0400] [domain.tld/sid#100aae0b0][rid#100b5ea98/initial] (1) pass through /category/13 65.19.81.253 - - [22/Oct/2009:17:31:53 --0400] [domain.tld/sid#100aae0b0][rid#100b6aa98/subreq] (3) [perdir /Library/WebServer/Documents/tld.domain.www/] add path info postfix: /Library/WebServer/Documents/tld.domain.www/category.php -> /Library/WebServer/Documents/tld.domain.www/category.php/13 65.19.81.253 - - [22/Oct/2009:17:31:53 --0400] [domain.tld/sid#100aae0b0][rid#100b6aa98/subreq] (3) [perdir /Library/WebServer/Documents/tld.domain.www/] strip per-dir prefix: /Library/WebServer/Documents/tld.domain.www/category.php/13 -> category.php/13 65.19.81.253 - - [22/Oct/2009:17:31:53 --0400] [domain.tld/sid#100aae0b0][rid#100b6aa98/subreq] (3) [perdir /Library/WebServer/Documents/tld.domain.www/] applying pattern '^category/([^/\.]+)/?$' to uri 'category.php/13' 65.19.81.253 - - [22/Oct/2009:17:31:53 --0400] [domain.tld/sid#100aae0b0][rid#100b6aa98/subreq] (1) [perdir /Library/WebServer/Documents/tld.domain.www/] pass through /Library/WebServer/Documents/tld.domain.www/category.php 65.19.81.253 - - [22/Oct/2009:17:31:53 --0400] [domain.tld/sid#100aae0b0][rid#100b5ea98/initial] (3) [perdir /Library/WebServer/Documents/tld.domain.www/] add path info postfix: /Library/WebServer/Documents/tld.domain.www/category.php -> /Library/WebServer/Documents/tld.domain.www/category.php/13 65.19.81.253 - - [22/Oct/2009:17:31:53 --0400] [domain.tld/sid#100aae0b0][rid#100b5ea98/initial] (3) [perdir /Library/WebServer/Documents/tld.domain.www/] strip per-dir prefix: /Library/WebServer/Documents/tld.domain.www/category.php/13 -> category.php/13 65.19.81.253 - - [22/Oct/2009:17:31:53 --0400] [domain.tld/sid#100aae0b0][rid#100b5ea98/initial] (3) [perdir /Library/WebServer/Documents/tld.domain.www/] applying pattern '^category/([^/\.]+)/?$' to uri 'category.php/13' 65.19.81.253 - - [22/Oct/2009:17:31:53 --0400] [domain.tld/sid#100aae0b0][rid#100b5ea98/initial] (1) [perdir /Library/WebServer/Documents/tld.domain.www/] pass through /Library/WebServer/Documents/tld.domain.www/category.php 65.19.81.253 - - [22/Oct/2009:17:31:53 --0400] [domain.tld/sid#100aae0b0][rid#100b6ea98/subreq] (2) init rewrite engine with requested uri /13 65.19.81.253 - - [22/Oct/2009:17:31:53 --0400] [domain.tld/sid#100aae0b0][rid#100b6ea98/subreq] (3) applying pattern '.*' to uri '/13' 65.19.81.253 - - [22/Oct/2009:17:31:53 --0400] [domain.tld/sid#100aae0b0][rid#100b6ea98/subreq] (1) pass through /13 65.19.81.253 - - [22/Oct/2009:17:31:53 --0400] [domain.tld/sid#100aae0b0][rid#100b6ea98/subreq] (3) [perdir /Library/WebServer/Documents/tld.domain.www/] strip per-dir prefix: /Library/WebServer/Documents/tld.domain.www/13 -> 13 65.19.81.253 - - [22/Oct/2009:17:31:53 --0400] [domain.tld/sid#100aae0b0][rid#100b6ea98/subreq] (3) [perdir /Library/WebServer/Documents/tld.domain.www/] applying pattern '^category/([^/\.]+)/?$' to uri '13' 65.19.81.253 - - [22/Oct/2009:17:31:53 --0400] [domain.tld/sid#100aae0b0][rid#100b6ea98/subreq] (1) [perdir /Library/WebServer/Documents/tld.domain.www/] pass through /Library/WebServer/Documents/tld.domain.www/13

    Read the article

  • Cisco VPNClient from Mac won't connect using iPhone Tethering

    - by Dan Short
    I just set up iPhone tethering from my Snow Leopard Macbook Pro to my iPhone 3GS with the Datapro 4GB plan from AT&T. When attempting to connect to my corporate VPN from the MacBook Pro with Cisco VPNClient 4.9.01 (0100) I get the following log information: Cisco Systems VPN Client Version 4.9.01 (0100) Copyright (C) 1998-2006 Cisco Systems, Inc. All Rights Reserved. Client Type(s): Mac OS X Running on: Darwin 10.6.0 Darwin Kernel Version 10.6.0: Wed Nov 10 18:13:17 PST 2010; root:xnu-1504.9.26~3/RELEASE_I386 i386 Config file directory: /etc/opt/cisco-vpnclient 1 13:02:50.791 02/22/2011 Sev=Info/4 CM/0x43100002 Begin connection process 2 13:02:50.791 02/22/2011 Sev=Warning/2 CVPND/0x83400011 Error -28 sending packet. Dst Addr: 0x0AD337FF, Src Addr: 0x0AD33702 (DRVIFACE:1158). 3 13:02:50.791 02/22/2011 Sev=Warning/2 CVPND/0x83400011 Error -28 sending packet. Dst Addr: 0x0A2581FF, Src Addr: 0x0A258102 (DRVIFACE:1158). 4 13:02:50.792 02/22/2011 Sev=Info/4 CM/0x43100004 Establish secure connection using Ethernet 5 13:02:50.792 02/22/2011 Sev=Info/4 CM/0x43100024 Attempt connection with server "209.235.253.115" 6 13:02:50.792 02/22/2011 Sev=Info/4 CVPND/0x43400019 Privilege Separation: binding to port: (500). 7 13:02:50.793 02/22/2011 Sev=Info/4 CVPND/0x43400019 Privilege Separation: binding to port: (4500). 8 13:02:50.793 02/22/2011 Sev=Info/6 IKE/0x4300003B Attempting to establish a connection with 209.235.253.115. 9 13:02:51.293 02/22/2011 Sev=Warning/2 CVPND/0x83400018 Output size mismatch. Actual: 0, Expected: 237. (DRVIFACE:1319) 10 13:02:51.894 02/22/2011 Sev=Warning/2 CVPND/0x83400018 Output size mismatch. Actual: 0, Expected: 237. (DRVIFACE:1319) 11 13:02:52.495 02/22/2011 Sev=Warning/2 CVPND/0x83400018 Output size mismatch. Actual: 0, Expected: 237. (DRVIFACE:1319) 12 13:02:53.096 02/22/2011 Sev=Warning/2 CVPND/0x83400018 Output size mismatch. Actual: 0, Expected: 237. (DRVIFACE:1319) 13 13:02:53.698 02/22/2011 Sev=Warning/2 CVPND/0x83400018 Output size mismatch. Actual: 0, Expected: 237. (DRVIFACE:1319) 14 13:02:54.299 02/22/2011 Sev=Warning/2 CVPND/0x83400018 Output size mismatch. Actual: 0, Expected: 237. (DRVIFACE:1319) 15 13:02:54.299 02/22/2011 Sev=Info/4 IKE/0x43000075 Unable to acquire local IP address after 5 attempts (over 5 seconds), probably due to network socket failure. 16 13:02:54.299 02/22/2011 Sev=Warning/2 IKE/0xC300009A Failed to set up connection data 17 13:02:54.299 02/22/2011 Sev=Info/4 CM/0x4310001C Unable to contact server "209.235.253.115" 18 13:02:54.299 02/22/2011 Sev=Info/5 CM/0x43100025 Initializing CVPNDrv 19 13:02:54.300 02/22/2011 Sev=Info/4 CVPND/0x4340001F Privilege Separation: restoring MTU on primary interface. 20 13:02:54.300 02/22/2011 Sev=Info/4 IKE/0x43000001 IKE received signal to terminate VPN connection 21 13:02:54.300 02/22/2011 Sev=Info/4 IPSEC/0x43700008 IPSec driver successfully started 22 13:02:54.300 02/22/2011 Sev=Info/4 IPSEC/0x43700014 Deleted all keys 23 13:02:54.300 02/22/2011 Sev=Info/4 IPSEC/0x4370000D Key(s) deleted by Interface (192.168.0.171) 24 13:02:54.300 02/22/2011 Sev=Info/4 IPSEC/0x43700014 Deleted all keys 25 13:02:54.300 02/22/2011 Sev=Info/4 IPSEC/0x43700014 Deleted all keys 26 13:02:54.300 02/22/2011 Sev=Info/4 IPSEC/0x43700014 Deleted all keys 27 13:02:54.300 02/22/2011 Sev=Info/4 IPSEC/0x4370000A IPSec driver successfully stopped The key line is 15: 15 13:02:54.299 02/22/2011 Sev=Info/4 IKE/0x43000075 Unable to acquire local IP address after 5 attempts (over 5 seconds), probably due to network socket failure. I can't find anything online about this. I found a single entry for the error message in Google, and it was a swedish (or some other nordic language site) that didn't have an answer to the question. I've tried connecting through both USB and Bluetooth tethering to the iPhone, and they both return the exact same results. I don't have direct control over the firewall, but if changes are necessary to make it work, I may be able to get the powers-that-be to make adjustments. A solution that doesn't require reconfiguring the firewall would be far better of course... Does anyone know what I can do to make this behave? Thanks, Dan

    Read the article

  • Capistrano + Nginx + Passenger = 403

    - by slimchrisp
    I asked this over at stackoverflow as well, but still haven't received any answers that have helped me to solve this problem. I have spent almost a week at this point trying to solve the issue, and I'm just not making any headway. It seems that this issue is pretty common, but none of the solutions I found online work for me. A buddy of mine is actually creating the same setup, and he is having the same issue. After a few days stuck with the 403 error I started over using this tutorial: http://blog.ninjahideout.com/posts/a-guide-to-a-nginx-passenger-and-rvm-server I had hoped starting from scratch using this tutorial would work, but no dice. Either way, if you view the tutorial you can see what steps I have taken. Here is essentially what I have going on. I have a VPS account on linode.com Server OS is Ubuntu 10.04 Local OS (shouldn't matter, but just so you know) used to deploy with Capistrano is Snow Leopard 10.6.6 I use RVM on the server. Version is 1.2.2 I was previously on ruby-1.9.2-p0 [ i386 ], but per the tutorial listed above I switched to ree-1.8.7-2010.02 [ i386 ]. Running 'which ruby' from the command line verifies that I am using 1.8.7 with the following output: /usr/local/rvm/rubies/ree-1.8.7-2010.02/bin/ruby passenger -v prints the following: Phusion Passenger version 3.0.2 Running 'nginx -v' gives me a message that the command nginx could not be found. The server is definitely there and running as I can use nginx to serve static files, but this could have something to do with my problem. I have two users dealing with the install. root which I used to install everything, and deployer which is a user I created specifically to for deploying my applications My web app directory is in the deployer user's home directory as follows: /home/deployer/webapps/mysite.com/public Per Capistrano default deploy, a symbolic link called current is created in the public folder, and points to /home/deployer/webapps/mysite.com/public/releases/most_current_release I have chmodded the deployer directory recursively to 777 /opt/nginx permissions: rwxr-xr-x /usr/local/rvm/gems/ree-1.8.7-2010.02/gems/passenger-3.0.2 permissions: rwxrwsrwx My nginx config file has gone through just short of eternity variations, but currently looks like this: ================================================================================== worker_processes 1; events { worker_connections 1024; } http { passenger_root /usr/local/rvm/gems/ree-1.8.7-2010.02/gems/passenger-3.0.2; passenger_ruby /usr/local/rvm/bin/passenger_ruby; include mime.types; default_type application/octet-stream; sendfile on; keepalive_timeout 65; server { # listen *:80; server_name mysite.com www.mysite.com; root /home/deployer/webapps/mysite.com/public/current; passenger_enabled on; passenger_friendly_error_pages on; access_log logs/mysite.com/server.log; error_log logs/mysite.com/error.log info; error_page 500 502 503 504 /50x.html; location = /50x.html { root html; } } } ================================================================================== I bounce nginx, hit the site, and boom. 403, and logs say directory index of /home/deployer... is forbidden As others with a similar problem have said, you can drop an index.html into the public/releases/current_release and it will render. But rails no worky. That's basically it. At this point I have just about completely exhausted every possible solution attempt I can think of. I am a programmer and definitely not a sysadmin, so I am 99% sure this has something to do with permissions that I have hosed, but for the life of me I just can't figure out where. If anyone can help I would really really appreciate it. If there's any specific permission things you want me to check (ie groups/permissions), can you please include the commands to do so as well. Hopefully this will help others in the future who read this post. Let me know if there is any other information I can provide, and thanks in advance!!!

    Read the article

  • WebLogic Server 12c????????????????????????????????????/???????WebLogic Server 12c Forum 2012?????

    - by ???02
    2012?1??????WebLogic Server 12c???200??????????????????????????????????????????????????????????????????????????????????????????????????????????????????????2012?8????????WebLogic Server 12c Forum 2012????????·??????????????????????????/?????????????????(???) ????????????WebLogic Server 12c????????? ??WebLogic Server???????·???????WebLogic Server?????????????????????????????????????WebLogic Server 12c Forum 2012?????????????????·????????????????????????????????????????????????????·?????????????WebLogic Server 12c??????????????/????????????? ???????????????????????????? ????????????????????????????????????? ?????? ??????????????????????????????????? ??????????????????????????????????????????????????????????????????????????“??????????????????????????”????????????????????????WebLogic Server 11g?????????????????? (1)????????????????????! = ??ID????????? WebLogic Server??????????????????????????????????????????????????????????????????????? ????????????????? ?????????·??????????????????? ??????init.d???????????? ???????????????ID????(boot.properties)??????????????????????WebLogic Server?????????????????????????????????? ???ID????????? <DOMAIN_HOME>/servers//security???????????·?????boot.properties????????????2??????? username= password= ???????????????????WebLogic Server?????????????????????????????????????????????????????????????????? (2)WLST???????????????????! = WLST????????? WebLogic Server???????????????????????????????????????????????????????????????/?????????????WLST(WebLogic Scripting Tool)????????????????????????????????????????????????????????????????????/????????????WLST?????????? ?????????????WLST???????????????????????Python?Java?????Jython?????????????WebLogic Server?????????????MBean???????????????????????????????????WLST?????????????Excel????????????????????????????????????????????????????????????????????????????WLST?????????????????????????????????? ?WLST???????????? ????????[????·????]-[???????]?????????????????[??]???????? ???????????????????????????[?????]????????py?????WLST???????????????????????????[??]??????????????????? ???????????????WLST?????????????????????WLST???????????????????????????????????????????????????????????????????? (3)????SQL?WebLogic Server???????! = ????·????? ??????????WebLogic Server??????????????????????????????SQL??????????????????????????????????·????????????????????????????????????????·???????????WebLogic Server????????·???????·???????????????WebLogic Server????/?????????????????????????????????????JDBC????????????????????????????SQL?ResultSet?????????????·????????? ????·????????????? ?????·??????? ????????[??]-[????]-[?????]-?????????????WebLogic Server?????/?????????????????????????????????????????[weblogic]-[jdbc]-[sql]-[DebugJDBCSQL]?????????[???]???????? ??????JDBC?????·???????·????????? ????/???????????????????????/???????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????? (4)[??]??????????????! = [??????????]????? ?[??]????????????????????????????????????????????????????????????????????????????[??]?????????????????????????????????2??????????????????????????????????????????????????????????????????????????????????????????????????????[??????????]?????????2?????????????????????????? ?????????2????????????? ????????[??????]-[???]-[???????????????]??????[???·???????]?????[??????????]?????????[??]???????? ??????????????????????????? (5)????????????????????????????! = ?V$SESSION.PROGRAM?????????????? ???Oracle Database?????????????????????????? WebLogic Server?????????????????????????????????????????????????????????????????????????????1??WebLogic Server????????????????????????????????????????????????????????????????????????????????????????????????????????????????? ???????????????V$SESSION.PROGRAM?????????????Oracle Database?????????·?????????????????????????????????V$SESSION????????????????PROGRAM????????????????????????????WebLogic Server???????????????????????????JDBC Thin Client???JDBC????????????????????????????????????????PROGRAM???????????????????????·?????????????????????? V$SESSION.PROGRAM???????????????????????????? ?V$SESSION.PROGRAM??????????????? ???????????([???JDBC?????????]??)?[?????]?????1??????? v$session.program= (6)???·???????·????????! = ????·????·????????? WebLogic Server?????????????????????????????????(???·??)????????????????·???????1??????????????????????????????????????????WebLogic Server?????????????????????????????????? ??????????????????·????·?????????????????????????WebLogic Server?????????????????????????????????????? ???????????JDK???????Log4j????????????????WebLogic Server???????????????? WebLogic Server????????JDK?Log4j??????????????????JDK?????????? ????·????·???????????????? ?????·????·????????? JDK???Log4j?????????????????????/?????????????? ?JDK???:weblogic.logging.ServerLoggingHandler ?Log4j???:weblogic.logging.log4j.ServerLoggingAppender ??????Log4j?????????????(????)? <appender name="file" class="org.apache.log4j.FileAppender"> <param name="File" value=“applog.log" /> <param name="Append" value="true" /> <layout class="org.apache.log4j.PatternLayout"> <param name="ConversionPattern" value="%d %5p %c{1} - %m%n" /> </layout> </appender> <appender name="server" class="weblogic.logging.log4j.ServerLoggingAppender"/> ?????????????????????????????????????????WebLogic Server?????????????????????????????????????? ?JDK???:-Djava.util.loggin.config.file=<PATH> ?Log4j???:-Dlog4j.configuration=<PATH> ???????????WAR??????????????????????·????·??????????WebLogic Server??????????????????????????????????????WebLogic Server???????????????????? (7)BEA??????????????????????! = GetMessage??????? WebLogic Server????????·??????????????(?BEA-XXXXXX??????????????????BEA?????)????WebLogic Server?HTML??????????????????Web????????????????????????????????????????????? ????????????GetMessage?????????????BEA?????????????????????????????????????????? ?GetMessage????????? java?????WebLogic Server?GetMessage???????????? java weblogic.GetMessage ?????????? ?-id XXXX:???????????? ?-verbose:????????? ?-lang XX:???????(?????????????????????????????????????) ????BEA-000337?????????????????????????????? java weblogic.GetMessage -verbose -id 000337 -lang ja 000337: ?????"{2}"?????{0}?"{1}"??????????????????????????(StuckThreadMaxTime)"{3}"?????????????·????: {4} L10n?????: weblogic.kernel I18n?????: weblogic.kernel ??????: WebLogicServer ???: ??? ????·????: false ????????: ???????????????????????????????? ??: ???????????????????????????????????? ?????: ??????????????????????????????????????????????????????????????·???(weblogic.Admin THREAD_DUMP)????????? ?????????BEA?????????????????????????????????????????????????????????????????????????????????? ????????“WebLogic??”!? WebLogic Server 12c????/??? ????????????? ???????????? ????????????????? ?????????????? ???????????? ????????????WebLogic Server???????????????????????????????????????????????WebLogic Server 12c?????????????????????????????????????????????????????????WebLogic Server 11g(10.3.6)???????????? ?????????Mac OS X???(???????)?IE 6?7??????????????? ??OTN??????????????????System Requirements and Supported Platforms for WebLogic Server 12c (12.1.1.x)?????????????Mac OS?????????????2012?8?2?????Mac OS X Snow Leopard????Java SE 7?????????? ???Internet Explorer(IE) 6.x??7.x???????????????????IE????????IE 8.x???????????? ????Web?????WebLogic Server?????????Web???·??????64?????????????(WebLogic Server??????????64?????)?????????WebLogic Server????????????????????????????????????????? ?RESTful????????? Java EE 6?JAX-RS????????????WebLogic Server 12c???????????????????????????????????? ?RESTful??????????? [????]-[??]-[??]?[RESTful??????????]?????????WebLogic Server??????????????????URL?????????????????????????? http(s)://:/management/tenant-monitoring/servers ???????servers??????clusters???applications???datasources??????????????????????????????????????????????? ????HTML??????JSON?XML???????????????????????????????????????????????????????????????????? ?JDBC????????(1):??????·???? ???????????????????????WebLogic Server??????????????????????????????????12c??Active GridLink for RAC???????????????????????????????????? 1??????????·?????????????????????[????]?????????[??????]????????????????????????????????????????????????????????????????????? <DOMAIN_HOME>/servers//logs/datasource.log ?????????????????????????????????????? ??????????????????????WLDF????????????????WebLogic Server 12c?????????????????????? ?JDBC????????(2):?????????? ????????????????[??]-[?????]???[????]?????????????????????????????????????????????????????????????????WebLogic Server 12c?????????????????????????????????????? ??????????????????????????????????WebLogic Server 11g(10.3.1)???1??????????????????????????????????????? ?JDBC????????(3):????????? WebLogic Server 12c??[??]-[?????]????????????????????[?????????]???1???????????????????????????????????????????????????????????????????????????????????????????????????????????????Oracle Database?????????????????????????? ErrorCode ????? 3113 ???????end-of-file???????? 3114 Oracle?????????? 1033 Oracle??????????????? 1034 Oracle??????? 1089 ?????????? - ?????????? 1090 ???????? - ?????????? 17002 I/O?? ?????????(1):?????/?????????????????? ??????????2?????? 1???WebLogic Server????????????????????????????????????????? -Dweblogic.management.username= -Dweblogic.management.password= ????????????ID???????????????? ?????????(2):SSL????Certicom?????? SSL?????Certicom(?????10.3.3?????)???????JSSE(Java Secure Socket Extension)????????????????????????????????????????? ??????????????????????????????? ????????????WebLogic Server?????????????????????????????????Java?????????·????2??????????Java????????????????nodemanager.properties?????????????StartScriptEnabled?????????false??true?????? ?????????????false?????????????WebLogic Server??????????????????true??????????????startWebLogic???????????????WebLogic Server??????????????startWebLogic???????????????????????????????????????????????????????????????? ???/???????(1):setDomainEnv???????????????? ??/?????????????“?????·???”????????????????????????????2???? 1??setDomainEnv?????????????????????????????32???JDK????????Perm????????????? ?WebLogic Server 11g(10.3.5) MEM_PERM_SIZE_64BIT="-XX:PermSize=128m" MEM_PERM_SIZE_32BIT="-XX:PermSize=48m" ... MEM_MAX_PERM_SIZE_64BIT="-XX:MaxPermSize=256m" MEM_MAX_PERM_SIZE_32BIT="-XX:MaxPermSize=128m" ?WebLogic Server 12c(12.1.1) MEM_PERM_SIZE_64BIT="-XX:PermSize=128m" MEM_PERM_SIZE_32BIT="-XX:PermSize=128m" ... MEM_MAX_PERM_SIZE_64BIT="-XX:MaxPermSize=256m" MEM_MAX_PERM_SIZE_32BIT="-XX:MaxPermSize=256m" ???/???????(2):stopWebLogic??????shutdown.py????????? ??/???????????2????stopWebLogic??????????????shutdown.py??????????????????????????????ID/????????????????????????shutdown.py??????????????WebLogic Server 11g(10.3.3)?????????????ID????????????????????WebLogic Server 12c???????? ????????????? ?????????????/??? ???????????/?????????????? ???KernelMBean????UseConcurrentQueueForRequestManager?????????????????????????????[????]--[??????]-[??]?[?????·???????????????]??????????????????????????????????????????MBean???????????????????????????????????????????????????????????????????????????????????????????(???)? ??1???Windows?????????beasvc.exe????wlsvc.exe????????????????????????wlsvc _???????BEA????????????????(???)? ????WLST???????Jython???????????????????2.1??2.2.1????????(???11g??2.2.1???????)???????????????……?(???)? ???????WebLogic Server 12c???????????????????????/????????????????????????????????????????WebLogic Server?????????WebLogic Server????????????Facebook?????????WebLogic!??????????????

    Read the article

  • Setting environment variables in OS X

    - by Percival Ulysses
    Despite the warning that questions that can be answered are preferred, this question is more a request for comments. I apologize for this, but I feel that it is valuable nonetheless. The problem to set up environment variables such that they are available for GUI applications has been around since the dawn of Mac OS X. The solution with ~/.MacOSX/environment.plist never satisfied me because it was not reliable, and bash style globbing wasn't available. Another solution is the use of Login Hooks with a suitable shell script, but these are deprecated. The Apple approved way for such functionality as provided by login hooks is the use of Launch Agents. I provided a launch agent that is located in /Library/LaunchAgents/: <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>Label</key> <string>user.conf.launchd</string> <key>Program</key> <string>/Users/Shared/conflaunchd.sh</string> <key>ProgramArguments</key> <array> <string>~/.conf.launchd</string> </array> <key>EnableGlobbing</key> <true/> <key>RunAtLoad</key> <true/> <key>LimitLoadToSessionType</key> <array> <string>Aqua</string> <string>StandardIO</string> </array> </dict> </plist> The real work is done in the shell script /Users/Shared/conflaunchd.sh, which reads ~/.conf.launchd and feeds it to launchctl: #! /bin/bash #filename="$1" filename="$HOME/.conf.launchd" if [ ! -r "$filename" ]; then exit fi eval $(/usr/libexec/path_helper -s) while read line; do # skip lines that only contain whitespace or a comment if [ ! -n "$line" -o `expr "$line" : '#'` -gt 0 ]; then continue; fi eval launchctl $line done <"$filename" exit 0 Notice the call of path_helper to get PATH set up right. Finally, ~/.conf.launchd looks like that setenv PATH ~/Applications:"${PATH}" setenv TEXINPUTS .:~/Documents/texmf//: setenv BIBINPUTS .:~/Documents/texmf/bibtex//: setenv BSTINPUTS .:~/Documents/texmf/bibtex//: # Locale setenv LANG en_US.UTF-8 These are launchctl commands, see its manpage for further information. Works fine for me (I should mention that I'm still a Snow Leopard guy), GUI applications such as texstudio can see my local texmf tree. Things that can be improved: The shell script has a #filename="$1" in it. This is not accidental, as the file name should be feeded to the script by the launch agent as an argument, but that doesn't work. It is possible to put the script in the launch agent itsself. I am not sure how secure this solution is, as it uses eval with user provided strings. It should be mentioned that Apple intended a somewhat similar approach by putting stuff in ~/launchd.conf, but it is currently unsupported as to this date and OS (see the manpage of launchd.conf). I guess that things like globbing would not work as they do in this proposal. Finally, I would mention the sources I used as information on Launch Agents, but StackExchange doesn't let me [1], [2], [3]. Again, I am sorry that this is not a real question, I still hope it is useful.

    Read the article

  • Can connect to Samba server but cannot access shares?

    - by jlego
    I have setup a stand-alone box running Fedora 16 to use as a file-sharing and web development server. Needs to be able to share files with a PC running Windows 7 and a Mac running OSX Snow Leopard. I've setup Samba using the Samba configuration GUI tool. Added users to Fedora and connected them as Samba users (which are the same as the Windows and Mac usernames and passwords). The workgroup name is the same as the Windows workgroup. Authentication is set to User. I've allowed Samba and Samba client through the firewall and set the ethernet to a trusted port in the firewall. Both the Windows and Mac machines can connect to the server and view the shares, however when trying to access the shares, Windows throws error 0x80070035 " Windows cannot access \SERVERNAME\ShareName." Windows user is not prompted for a username or password when accessing the server (found under "Network Places"). This also happens when connecting with the IP rather than the server name. The Mac can also connect to the server and see the shares but when choosing a share gives the error "The original item for ShareName cannot be found." When connecting via IP, the Mac user is prompted for username and password, which when authenticated gives a list of shares, however when choosing a share to connect to, the error is displayed and the user cannot access the share. Since both machines are acting similarly when trying to access the shares, I assume it is an issue with how Samba is configured. smb.conf: [global] workgroup = workgroup server string = Server log file = /var/log/samba/log.%m max log size = 50 security = user load printers = yes cups options = raw printcap name = lpstat printing = cups [homes] comment = Home Directories browseable = no writable = yes [printers] comment = All Printers path = /var/spool/samba browseable = yes printable = yes [FileServ] comment = FileShare path = /media/FileServ read only = no browseable = yes valid users = user1, user2 [webdev] comment = Web development path = /var/www/html/webdev read only = no browseable = yes valid users = user1 How do I get samba sharing working? UPDATE: Before this box I had another box with the same version of fedora installed (16) and samba working for these same computers. I started up the old machine and copied the smb.conf file from the old machine to the new one (editing the share definitions for the new shares of course) and I still get the same errors on both client machines. The only difference in environment is the hardware and the router. On the old machine the router received a dynamic public IP and assigned dynamic private IPs to each device on the network while the new machine is connected to a router that has a static public IP (still dynamic internal IPs though.) Could either one of these be affecting Samba? UPDATE 2: As the directory I am trying to share is actually an entire internal disk, I have tried to things: 1.) changing the owner of the mounted disk from root to my user (which is the same username as on the Windows machine) 2.) made a share that only included one of the folders on the disk instead of the entire disk with my user again as the owner. Both tests failed giving me the same errors regarding the network address. UPDATE 3: Not sure exactly what I did, but now whenever I try to connect to the share on the Windows 7 client I am prompted for my username and password. When I enter the correct credentials I get an access denied message. However I did notice that under the login box "domain: WINDOWS-PC-NAME" is listed. I believe this could very well be the problem. Any suggestions? UPDATE 4: So I've completely reinstalled Fedora and Samba now. I've created a share on the first harddrive (one fedora is installed on) and I can access that fine from Windows. However when I try to share any data on the second disk, I am receiving the same error. This I believe is the problem. I think I need to change some things in fstab or fdisk or something. UPDATE 5: So in fstab I mapped the drive to automount in a folder which works correctly. I also added the samba_share_t SElinux label to the mountpoint directory which now allows me to access the shares on the Windows machine, however I cannot see any of the files in the directory on the windows machine. (They are there, I can see them in the fedora file browser locally) UPDATE 6: Figured it out. See answer below

    Read the article

  • I can connect to Samba server but cannot access shares.

    - by jlego
    I'm having trouble getting samba sharing working to access shares. I have setup a stand-alone box running Fedora 16 to use as a file-sharing and web development server. It needs to be able to share files with a Windows 7 PC and a Mac running OSX Snow Leopard. I've setup Samba using the Samba configuration GUI tool on Fedora. Added users to Fedora and connected them as Samba users (which are the same as the Windows and Mac usernames and passwords). The workgroup name is the same as the Windows workgroup. Authentication is set to User. I've allowed Samba and Samba client through the firewall and set the ethernet to a trusted port in the firewall. Both the Windows and Mac machines can connect to the server and view the shares, however when trying to access the shares, Windows throws error: 0x80070035 " Windows cannot access \\SERVERNAME\ShareName." Windows user is not prompted for a username or password when accessing the server (found under "Network Places"). This also happens when connecting with the IP rather than the server name. The Mac can also connect to the server and see the shares but when choosing a share gives the error: The original item for ShareName cannot be found. When connecting via IP, the Mac user is prompted for username and password, which when authenticated gives a list of shares, however when choosing a share to connect to, the error is displayed and the user cannot access the share. Since both machines are acting similarly when trying to access the shares, I assume it is an issue with how Samba is configured. smb.conf: [global] workgroup = workgroup server string = Server log file = /var/log/samba/log.%m max log size = 50 security = user load printers = yes cups options = raw printcap name = lpstat printing = cups [homes] comment = Home Directories browseable = no writable = yes [printers] comment = All Printers path = /var/spool/samba browseable = yes printable = yes [FileServ] comment = FileShare path = /media/FileServ read only = no browseable = yes valid users = user1, user2 [webdev] comment = Web development path = /var/www/html/webdev read only = no browseable = yes valid users = user1 How do I get samba sharing working? UPDATE: I Figured it out, it was because I was sharing a second hard drive. See checked answer below. Speculation 1: Before this box I had another box with the same version of fedora installed (16) and samba working for these same computers. I started up the old machine and copied the smb.conf file from the old machine to the new one (editing the share definitions for the new shares of course) and I still get the same errors on both client machines. The only difference in environment is the hardware and the router. On the old machine the router received a dynamic public IP and assigned dynamic private IPs to each device on the network while the new machine is connected to a router that has a static public IP (still dynamic internal IPs though.) Could either one of these be affecting Samba? Speculation 2: As the directory I am trying to share is actually an entire internal disk, I have tried these things: 1.) changing the owner of the mounted disk from root to my user (which is the same username as on the Windows machine) 2.) made a share that only included one of the folders on the disk instead of the entire disk with my user again as the owner. Both tests failed giving me the same errors regarding the network address. Speculation 3: Whenever I try to connect to the share on the Windows 7 client I am prompted for my username and password. When I enter the correct credentials I get an access denied message. However I did notice that under the login box "domain: WINDOWS-PC-NAME" is listed. I believe this could very well be the problem. Speculation 4: So I've completely reinstalled Fedora and Samba now. I've created a share on the first harddrive (one fedora is installed on) and I can access that fine from Windows. However when I try to share any data on the second disk, I am receiving the same error. This I believe is the problem. I think I need to change some things in fstab or fdisk or something. Speculation 5: So in fstab I mapped the drive to automount in a folder which works correctly. I also added the samba_share_t SElinux label to the mountpoint directory which now allows me to access the shares on the Windows machine, however I cannot see any of the files in the directory on the windows machine. (They are there, I can see them in the fedora file browser locally)

    Read the article

  • CodePlex Daily Summary for Tuesday, February 23, 2010

    CodePlex Daily Summary for Tuesday, February 23, 2010New Projects.NET Beginners: This project is a summary of project for first time developer and .net beginners. the aim is to provide tools and libraries to get startet with dev...A simple ASP.NET Currency / Money TextBox User Control: A ASP.NET TextBox control used with AJAX maskeditextender makes it possible to enter numbers but it's not very intuitive to use. CurrencyTextBox co...Academiki: Academik The project aims to be a university social network with content sharing and intellectual property. Academik makes it easier for students t...Acessando Campos com XPath Expression: Esse é um exemplo de como usar Xpath Expression na orchestration do Biztalk 2006. O Artigo do exemplo esta em www.biztalkbrasil.blogspot.comAg.CommandManager: A command manager implementation for Silverlights. Supports commanding to more or less any event using the ICommand interfaceApunta Notas: Apunta notas is just a note taking program that I created to learn WPF. Now you can write everything you need to remember or tell somebody. Or you...AzureKit: AzureKit provides a more direct approach to Azure's Table Service, which takes more advantage of the NoSQL nature of the storage medium.CRM 4.0 Distribute Workflow Activity: This plugin allows to execute a workflow for each entity that has a 1:N or N:N relationship to a given entity. For example: execute a workflow for...Dbg Shell: Dbg Shell replaces WinDbg for debugging dumps. All standard Dbg commands are supported. You can also write scripts in .Net assemblies to automated ...Egg Timer: Egg Timer is a very simple Windows Form application for setting short time-frame alarms.Enterprise Library Extensions: Extensions for the Microsoft Enterprise Library applications blocks which makes programming applications even easier.Event Calendar 2.0 Data Extractor: Really simple app to recover event calendar 2.0 information from iGoogle settings files and turn them into CSV format info for importing to other c...iTwiit: Silverlight Twitter Clientlibtym: Have your complete movie collection at a glance to manage all your movie files very comfortably!Metabolite Enterprise Libraries for EPiServer CMS using Page Type Builder: The Metabolite Enterprise libraries are a set of C# Class Libraries developed for use with EPiServer 5 R2 SP2+ projects using PageTypeBuilder. They...Metro UX: Metro UXMTI: -Personal Expense Tracker: Personal Expense Tracker helps you track your expenses. I tried to find simple win forms expense tracker but found none interesting, so i made one...rarouš: repository for rarouš.weblog articlesSacDotNetUG: SacDotNetUG is an ASP.NET MVC 2 Web application intended for the Sacramento .NET user group. This project servers 2 main goals: to promote the adop...ShellLight: ShellLight is essentially a graphical shell for Silverlight applications that enables a quick auto-complete launcher for features in your solution.Sina Weibo(Microblog): sina weibo .NET libraries and applications.Terrain Independant Navigating Automaton v2.0: This is where members of the Robot Design Team from Stony Brook University come together and work on our unique TINA. This project is for a self-go...Url Rewrite.Net: Url Rewrite.Net is an open-source SEO project which contains Custom Http Module example and Custom Configrutaion Module.It is developed in C#.NET 2...WebPart and WebService Currency Converter: This is only a sample code how to get data from yahoo finance and how to implementing on Sharepoint WebPart or WebServices. This code it is freely...WPF AutoComplete TextBox Control: A AutoComplete TextBox Control written in WPF, Looks like the system built-in auto-completion(SHAutoComplete).ZWaveAPI: This project is aim to create an open class library on ZWave. It is based on article from digiWave.dk New Releases.NET Beginners: MathLab Visual Studio Project Template: First preview to a mathlab beginners library..NET Beginners: Turtle Visual Studio Project Template: The turtle engine is a very simlpe turtle which runs over a beach and leaves a track.A simple ASP.NET Currency / Money TextBox User Control: CurrencyTextBox Source v1.0: Source code with a test project.A simple ASP.NET Currency / Money TextBox User Control: CurrencyTextBox.dll: The User Control for use in projects.Acessando Campos com XPath Expression: Source Code SampleXPathExpression: O Source code contem o Projeto em Visual Studio 2005.Actipro WPF Controls Contrib: v2009.2 build 515: Minor tweaks and updated to target Actipro WPF Studio 2009.2 (build 515).Analysis Management System: 1.0.0.1 Update: Fix - Issue 4004 Nieuw - Beschikbare klanten kunnen nu bekeken worden via Extra/Aanvragers (Ctrl R)Apunta Notas: Apunta Notas 1.0 Release Candidate: There is the Release Candidate of Apunta Notas.ARSoft.Tools.Net - C# DNS and SPF Library: 1.2.0: Added asynchronous operations for DNS client.CRM 4.0 Distribute Workflow Activity: Beta: Initial release. Complete functionality, limited testing.Dbg Shell: First Public Release: First ReleaseDnDns and PocketDnDns - A .NET DNS Client Resolver Library: DnDns Library Release 2: A DNS protocol library written completely in managed code (C#). Supports common DNS records types like A, CNAME, MX, SRV, and more. Works on Window...Egg Timer: Egg Timer v1.0: Pretty simple application. Set the time directly or use the 5 minute and 1 hour increment/decrement buttons.EnhSim: EnhSim v1.9.7.2 BETA: 1.9.7.2 BETAImportant!: This beta version includes the changes to the Flame shock damage-over-time component which are currently on the PTR. Downlo...EnhSim: EnhSim v1.9.7.3 BETA: Important!: This beta version includes the changes to the Flame shock damage-over-time component which are currently on the PTR. Download 1.9.7.1 f...Esendex SMS SDK and Downloads for Microsoft.NET languages: Esendex .NET SDK v0.4.0: Features Messaging Service: Send a single SMS message and multiple SMS messages. Send a single Voice Message and multiple Voice Messages. Send...Event Calendar 2.0 Data Extractor: V1.0: First ever build of extractorExcelDna: ExcelDna Version 0.22: An important bugfix release that fixes a critical bug in the MultiThreaded marshaling support (under Excel 2007).InfoService: InfoService v1.5 Beta 8: InfoService Beta Release Please note this is a BETA. It should be stable, but i can't gurantee that! So use it on your own risk. Please read Plugi...Krypton Palette Selectors: Release 1.2: Adds the new KryptonPaletteContextMenu and refactors the KryptonPaletteDropButton to use it.kuuy static system: kss_v1.0beta: kuuy static sytem 1.0 beta editionlibtym: libtym: First public release version. Full functionality, tested. Please notify about bugs.mojoPortal: 2.3.3.9: see release notes on mojoPortal.com http://www.mojoportal.com/mojoportal-2339-released.aspx This release makes it easy to use Artisteer html templa...Net Tool: v1.01: User interface has been changedOpen NFSe: Open NFSe 0.1 (Salvador): Open NFSe 0.1 (Salvador)Paint.NET PSD Plugin: 1.0.7: Further substantial improvements in speed of both loading and saving. In particular, loading is about 5x as fast as in version 1.0.6. Saving is ...Project Starlight: 2.0: Release 2.0 final Changes: -Numerous stability fixes -Firefox 3.5 support -Safari 64 bit support (Snow Leopard) Mac and Windows Binaries are avai...RoTwee: RoTwee 5.0.0.1: This version fix for 16620Secure Data: Secure Data 2010.02.22.01: This version has been rewritten and contains many enhancements and I encourage anyone interested to download the source code and work through the Q...TreeSizeNet: TreeSizeNet 0.10.1: - Complete Redesign - Improved Stability - Improved Performance - PieChart for directory contentUrl Rewrite.Net: Beta V0.1 Release: Includes : -Custom Http Module -Custom Configuration Section Module ( in web.config) -Rewriting ModuleVCC: Latest build, v2.1.30222.0: Automatic drop of latest buildWebPart and WebService Currency Converter: CurrencyConverter.zip: CurrencyConverter.zip Have 3 Project on this files: 1. Library Project 2. Load Library Project Using Web Services 3. Load Library Project Using We...WSUS Smart Approve: 1.0.0.2: Fix: 25903ZuneConsole: ZuneConsole: Console GUI for the Zune Customs library, which should make everything work. This is what you should download.ZuneConsole: ZuneConsole How-To Manual: A quick (only 9 pages lol) tutorial on how to add custom artist info to your Zune.Most Popular ProjectsRawrWBFS ManagerAJAX Control ToolkitMicrosoft SQL Server Product Samples: DatabaseSilverlight ToolkitWindows Presentation Foundation (WPF)ASP.NETDotNetNuke® Community EditionImage Resizer Powertoy Clone for WindowsMicrosoft SQL Server Community & SamplesMost Active ProjectsDinnerNow.netRawrBlogEngine.NETNB_Store - Free DotNetNuke Ecommerce Catalog ModuleSharpyInfoServicejQuery Library for SharePoint Web ServicesPHPExcelpatterns & practices – Enterprise LibrarySharePoint Contrib

    Read the article

  • Heroku Problem During Database Pull of Rails App: Mysql::Error MySQL server has gone away

    - by Rich Apodaca
    Attempting to pull my database from Heroku gives an error partway through the process (below). Using: Snow Leopard; heroku-1.8.2; taps-0.2.26; rails-2.3.5; mysql-5.1.42. Database is smallish, as you can see from the error message. Heroku tech support says it's a problem on my system, but offers nothing in the way of how to solve it. I've seen the issue reported before - for example here. How can I get around this problem? The error: $ heroku db:pull Auto-detected local database: mysql://[...]@localhost/[...]?encoding=utf8 Receiving schema Receiving data 17 tables, 9,609 records [...] /Library/Ruby/Gems/1.8/gems/sequel-3.0.0/lib/sequel/adapters/mysql.rb:166:in `query': Mysql::Error MySQL server has gone away (Sequel::DatabaseError) from /Library/Ruby/Gems/1.8/gems/sequel-3.0.0/lib/sequel/adapters/mysql.rb:166:in `_execute' from /Library/Ruby/Gems/1.8/gems/sequel-3.0.0/lib/sequel/adapters/mysql.rb:125:in `execute' from /Library/Ruby/Gems/1.8/gems/sequel-3.0.0/lib/sequel/connection_pool.rb:101:in `hold' from /Library/Ruby/Gems/1.8/gems/sequel-3.0.0/lib/sequel/database.rb:461:in `synchronize' from /Library/Ruby/Gems/1.8/gems/sequel-3.0.0/lib/sequel/adapters/mysql.rb:125:in `execute' from /Library/Ruby/Gems/1.8/gems/sequel-3.0.0/lib/sequel/database.rb:296:in `execute_dui' from /Library/Ruby/Gems/1.8/gems/sequel-3.0.0/lib/sequel/dataset.rb:276:in `execute_dui' from /Library/Ruby/Gems/1.8/gems/sequel-3.0.0/lib/sequel/adapters/mysql.rb:365:in `execute_dui' from /Library/Ruby/Gems/1.8/gems/sequel-3.0.0/lib/sequel/dataset/convenience.rb:126:in `import' from /Library/Ruby/Gems/1.8/gems/sequel-3.0.0/lib/sequel/dataset/convenience.rb:126:in `each' from /Library/Ruby/Gems/1.8/gems/sequel-3.0.0/lib/sequel/dataset/convenience.rb:126:in `import' from /Library/Ruby/Gems/1.8/gems/sequel-3.0.0/lib/sequel/adapters/mysql.rb:144:in `transaction' from /Library/Ruby/Gems/1.8/gems/sequel-3.0.0/lib/sequel/connection_pool.rb:108:in `hold' from /Library/Ruby/Gems/1.8/gems/sequel-3.0.0/lib/sequel/database.rb:461:in `synchronize' from /Library/Ruby/Gems/1.8/gems/sequel-3.0.0/lib/sequel/adapters/mysql.rb:138:in `transaction' from /Library/Ruby/Gems/1.8/gems/sequel-3.0.0/lib/sequel/dataset/convenience.rb:126:in `import' from /Library/Ruby/Gems/1.8/gems/taps-0.2.26/lib/taps/client_session.rb:211:in `cmd_receive_data' from /Library/Ruby/Gems/1.8/gems/taps-0.2.26/lib/taps/client_session.rb:203:in `loop' from /Library/Ruby/Gems/1.8/gems/taps-0.2.26/lib/taps/client_session.rb:203:in `cmd_receive_data' from /Library/Ruby/Gems/1.8/gems/taps-0.2.26/lib/taps/client_session.rb:196:in `each' from /Library/Ruby/Gems/1.8/gems/taps-0.2.26/lib/taps/client_session.rb:196:in `cmd_receive_data' from /Library/Ruby/Gems/1.8/gems/taps-0.2.26/lib/taps/client_session.rb:175:in `cmd_receive' from /Library/Ruby/Gems/1.8/gems/heroku-1.8.2/bin/../lib/heroku/commands/db.rb:17:in `pull' from /Library/Ruby/Gems/1.8/gems/heroku-1.8.2/bin/../lib/heroku/commands/db.rb:119:in `taps_client' from /Library/Ruby/Gems/1.8/gems/taps-0.2.26/lib/taps/client_session.rb:21:in `start' from /Library/Ruby/Gems/1.8/gems/heroku-1.8.2/bin/../lib/heroku/commands/db.rb:115:in `taps_client' from /Library/Ruby/Gems/1.8/gems/heroku-1.8.2/bin/../lib/heroku/commands/db.rb:16:in `pull' from /Library/Ruby/Gems/1.8/gems/heroku-1.8.2/bin/../lib/heroku/command.rb:45:in `send' from /Library/Ruby/Gems/1.8/gems/heroku-1.8.2/bin/../lib/heroku/command.rb:45:in `run_internal' from /Library/Ruby/Gems/1.8/gems/heroku-1.8.2/bin/../lib/heroku/command.rb:17:in `run' from /Library/Ruby/Gems/1.8/gems/heroku-1.8.2/bin/heroku:14 from /usr/bin/heroku:19:in `load' from /usr/bin/heroku:19

    Read the article

< Previous Page | 63 64 65 66 67 68  | Next Page >