Search Results

Search found 4509 results on 181 pages for 'logical domains'.

Page 67/181 | < Previous Page | 63 64 65 66 67 68 69 70 71 72 73 74  | Next Page >

  • How to configure DNS server to forward queries about particular domain AND all of its subdomains

    - by user71061
    I have DNS server (linux box with bind9), which is authorative for some domains, and forward all other queries to external DNS server of my ISP provider. So far no problem. Now I want that queries about some specific domains were forwarded to my internal DNS server, f.e.: zone "some_domain" { type forward; forwarders { some_internal_dns_ip; }; }; So far still no problem, all works ok. But then, I want also to forward some reverse DNS queries to my internal DNS. So, I have added: zone "16.172.in-addr.arpa" { type forward; forwarders { some_internal_dns_ip; }; }; And this doesn't work as I expect. Queries about "16.172.in-addr.arpa" (for example 1.16.172.in-addr.arpa) are resolved correctly, but reverse queries about full address (for example 1.1.16.172.in-addr.arpa) are not. I understand that my server should use here some recursive query, but could not configure it. I have already tried adding following options recursion yes; allow-recursion { 127.0.0.1; }; allow-recursion-on { 127.0.0.1; }; but with no success . (I have used loopback address here, because I need this functionality only for my DNS host, and not for its clients) Any suggestions?

    Read the article

  • wildcard deal with www as a subdomain

    - by Alaa Gamal
    i am using wildcard with apache my APACHE CONFIG: ServerAlias *.staronece1.com DocumentRoot /staronece1/domains my named file $ttl 38400 staronece1.com. IN SOA staronece1.com. email.yahoo.com. ( 1334838782 10800 3600 604800 38400 ) staronece1.com. IN NS staronece1.com. staronece1.com. IN A 95.19.203.21 www.staronece1.com. IN A 95.19.203.21 server.staronece1.com. IN A 95.19.203.21 mail.staronece1.com. IN A 95.19.203.21 ns1.staronece1.com. IN A 95.19.203.21 ns2.staronece1.com. IN A 95.19.203.21 staronece1.com. IN NS ns1.staronece1.com. staronece1.com. IN NS ns2.staronece1.com. staronece1.com. IN MX 10 mail.staronece1.com. * 14400 IN A 95.19.203.21 *.staronece1.com IN A 95.19.203.21 my php test file /staronece1/domains/index.php <?php function getBname(){ $bname=explode(".",$_SERVER['HTTP_HOST'],2); return $bname[0]; } echo 'SubDomain is :'.getBname(); ?> if i go to something.staronece1.com i get this result SubDomain is : something No the problem is if i go to www.staronece1.com i should get empty result, because www is not a sub domain but i get this result SubDomain is : www And if i go to www.something.staronece1.com i get firefox error message ( site not found ) How to fix this problem?? i think the solution is: added record for www in named file Thanks

    Read the article

  • How do I set up DNS with nic.io to point to an AWS EC2 server?

    - by Chad Johnson
    I purchased a domain one week ago via nic.io. I have elected to provide my own DNS [because they provided no other option]. I'm trying to point my .io domain at my EC2 server instance. I've allocated an elastic IP and associated it with the instance. I can SSH into the instance and access point 80 via the IP address just fine. The IP is 54.235.201.241. nic.io support said the following: "You have selected to provide your own DNS and therefore if there is an issue with the set-up of the name servers you will need to contact your DNS provider." So, I created a Hosted Zone via Route 53 in AWS. This created NS and SOA records. I then set the Primary and Secondary servers at nic.io's domain admin page to the SOA record domains. Additionally, I set the optional servers to the NS domains. I did this two days ago, and I can't access the server via the domain. I ran a DNS check here...still not sure what I need to do: http://mydnscheck.com/?domain=chadjohnson.io&ns1=&ns2=&ns3=&ns4=&ns5=&ns6=. I have no idea what I'm supposed to do. Does anyone have any ideas?

    Read the article

  • Fetch videos from sony handycam to linux

    - by bstpierre
    I've got a Sony Handycam DCR-DVD101. When I plug connect the USB cable to my laptop (Ubuntu 10) it doesn't mount any storage device. If I run usb-devices, I see: T: Bus=02 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 6 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=054c ProdID=00c1 Rev=01.00 S: Manufacturer=SONY S: Product=Storage Device C: #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=2mA I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=05 Prot=50 Driver=usb-storage The driver says usb-storage, but I'm not sure how to get the device mounted. Is there a way to make this work? Update: checking dmesg, I see: [259072.576559] usb 2-1.1: new high speed USB device using ehci_hcd and address 6 [259072.687200] usb 2-1.1: configuration #1 chosen from 1 choice [259072.836188] Initializing USB Mass Storage driver... [259072.836476] scsi5 : SCSI emulation for USB Mass Storage devices [259072.836632] usb-storage: device found at 6 [259072.836636] usb-storage: waiting for device to settle before scanning [259072.836660] usbcore: registered new interface driver usb-storage [259072.836666] USB Mass Storage support registered. [259077.830410] usb-storage: device scan complete [259077.832343] scsi 5:0:0:0: CD-ROM SONY DDX-A1010 R1.0 PQ: 0 ANSI: 0 [259077.888167] sr1: scsi3-mmc drive: 0x/0x pop-up [259077.888446] sr 5:0:0:0: Attached scsi CD-ROM sr1 [259077.888593] sr 5:0:0:0: Attached scsi generic sg2 type 5 [259080.002079] sr 5:0:0:0: [sr1] Unhandled sense code [259080.002085] sr 5:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [259080.002091] sr 5:0:0:0: [sr1] Sense Key : Blank Check [current] [259080.002097] sr 5:0:0:0: [sr1] Add. Sense: No additional sense information [259080.002104] sr 5:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 00 00 00 02 00 00 00 [259080.002117] end_request: I/O error, dev sr1, sector 0 [259080.002123] Buffer I/O error on device sr1, logical block 0 [259080.002128] Buffer I/O error on device sr1, logical block 1 Those I/O errors don't look good, is there any hope?

    Read the article

  • VPS with Plesk, one ip, and godaddy (definely need help)

    - by Francesco
    Hi there, here's my situation : i've Plesk 8.3.0 with one IP and i've registered my domains at godaddy.com My problem : i cannot figure out how to configure plesk and godaddy to have my domains (6) properly working into the VPS. i've only one IP, so i can't have my personal NS and need to use godaddy ns. But.. how do i set all the stuff ? I've made a try but it's not working. Please take a look : This is an example of how the domain i'm actually working on is configured On Plesk : Host Record type Value 1.2.3.4 / 24 PTR mydomain.com. ftp.mydomain.com. CNAME mydomain.com. mail.mydomain.com. A 1.2.3.4 ns.mydomain.com. A 1.2.3.4 mydomain.com. NS ns.mydomain.com. mydomain.com. A 1.2.3.4 mydomain.com. MX (10) mail.mydomain.com. webmail.mydomain.com. A 1.2.3.4 www.mydomain.com. CNAME mydomain.com. On godaddy,(Total DNS Control) for the same domain i have this setup : A (Host) Host Points To TTL Actions * 1.2.3.4 1 Hour CNAMES (Aliases) Host Points To TTL Actions e email.secureserver.net 1 Hour email email.secureserver.net 1 Hour ftp @ 1 Hour imap imap.secureserver.net 1 Hour mail pop.secureserver.net 1 Hour mobilemail mobilemail-v01.prod.mesa1.secureserver.net 1 Hour pda mobilemail-v01.prod.mesa1.secureserver.net 1 Hour pop pop.secureserver.net 1 Hour smtp smtp.secureserver.net 1 Hour webmail webmail.secureserver.net 1 Hour www @ 1 Hour MX (Mail Exchange) Priority Host Goes To TTL Actions 10 @ mailstore1.secureserver.net 1 Hour 0 @ smtp.secureserver.net Host Points To TTL Actions @ ns53.domaincontrol.com @ ns54.domaincontrol.com What should i correct ? Thanks for helping me Francesco

    Read the article

  • W2K INACCESSIBLE_BOOT_DEVICE, with System Commander

    - by Gary Kephart
    I have a system that was originally had Win NT. I added System Commander (SC7) and then added W2K. The relevant partitions are: 0 - Primary - MultiFAT (Has Win NT, mapped to C:) 1 - Extended - with many logical partitions: 1.1 NTFS which has W2K and is mapped to D: 1.2 other logical partitions which are irrelevant to this D: was getting full. It needed room for virus definitions and Windows upgrades. In the past, I had simple used SC7 to resize D: without problems. So I did it again this time. However, upon finishing, I got the message "Unable to create partition". It also marked the partition as unformatted. I checked that the files on the disk were still there using SC7's Partition Explorer, and they were there. I continued and the system managed to boot up fine anyways. Then I rebooted the system again. This time, I got a message saying "INACCESSIBLE_BOOT_DEVICE". I went back in to SC7 and to Partition Commander, and it was still saying that the partition was unformatted but the Partition Explorer still showed the files on the system. I finally decided to resize the partition again, figuring that this would force a rewrite of the partition information. That seemed to work, until I had to reboot again. Now I can't see the files using Partition Explorer, and the Resize button is now disabled. What now?

    Read the article

  • Virtualmin & git integration

    - by weby3456
    I've installed virtualmin on my VPS to manage my websites. It's working perfect and as expected nearly a year now. Recently I wanted to add some features to one of my sites, and I need git integration. I've correctly installed git & gitweb on my server, and I can create repositories and watch them under http://sub.domain.com/git/gitweb.cgi Here is the current relevant directory tree: /home/user/domains/sub.domain.com/public_html/git/ drwxr-sr-x user user . drwxr-x--- user user .. -rw-r--r-- user user git-favicon.png -rw-r--r-- user user git-logo.png -rwxr-xr-x user user gitweb.cgi -rw-r--r-- user user gitweb.css drwxrwx--- apache user reponame.git /home/user/domains/sub.domain.com/public_html/git/reponame.git/ drwxrwx--- apache user . drwxr-sr-x user user .. drwxrwx--- apache user branches -rwxrwx--- apache user config -rwxrwx--- user user description -rwxrwx--- apache user HEAD drwxrwx--- apache user hooks drwxrwx--- apache user info drwxrwx--- apache user objects drwxrwx--- apache user refs But I have some questions: When I'm visiting http://sub.domain.com/git/gitweb.cgi, the owner is listed as 'Apache'. why? how can I change that? Usually, to create a new git repository, I'll do something like: $ mkdir proj $ cd proj $ git init Initialized empty Git repository in /home/user/proj/.git/ // here I'm creating the files or copy them from somewhere else $ git add *.php $ git add README $ git commit -m 'initial version' But after creating the repository in virtualmin, I can find a new dir named 'reponame.git' but not the '.git' dir. When I'm trying to run any git command (e.g. git status) I'm receiving "fatal: This operation must be run in a work tree". How can I work with that repository? Currently I need to explicitly grant access for users to be able to view the repositories via gitweb. How can I make certain repositories public?

    Read the article

  • Syntax Error when setting up Domain Alias

    - by Poundtrader
    I'm attempting to set up a domain alias via Pre VirtualHost Include and I'm recieving the following error: Error: An error occurred while running: /usr/local/apache/bin/httpd -DSSL -t -f /usr/local/apache/conf/httpd.conf Exit signal was: 0 Exit value was: 1 Output was: --- Syntax error on line 15 of /usr/local/apache/conf/includes/pre_virtualhost_global.conf: CustomLog takes two or three arguments, a file name, a custom log format string or format name, and an optional "env=" clause (see docs) --- Basically I have two domains, the main domain has an opencart installation within a directory (/buy) and I'm attempting to use the multi-store function which allows you to administer multiple stores on multiple domains via the one opencart dashboard. My issue is that I have the opencart installations within the /buy directory so I have been given the following code which should allow me to use this functionality over the multiple cPanel accounts within the same VPS. <VirtualHost 87.117.239.29:80> ServerName newdomain.co.uk ServerAlias www.newdomain.co.uk Alias /buy /home/originaldomain/public_html/buy/ DocumentRoot /home/newdom/public_html ServerAdmin [email protected] ## User newdom # Needed for Cpanel::ApacheConf <IfModule mod_suphp.c> suPHP_UserGroup newdom newdom </IfModule> <IfModule mod_ruid2.c> RUidGid newdom newdom </IfModule> CustomLog /usr/local/apache/domlogs/newdomain.co.uk-bytes_log “%{%s}t %I .\n%{%s}t %O .” CustomLog /usr/local/apache/domlogs/newdomain.co.uk combined ScriptAlias /cgi-bin/ /home/newdom/public_html/cgi-bin/ </VirtualHost> Does anyone know how to get this code to work? Thanks,

    Read the article

  • How to make Exchange 2003 non-authoritive

    - by Romski
    Background We are a small company with an internally hosted Exchange 2003. It receives email for 2 domains (the company was renamed a few years back). For the sake of argument, the domains are: oldname.com newname.com We have moved newname.com to a hosted exchange service, and our DNS record is correctly routing emails. Our internal server still receives email for oldname.com, although we have asked our hosting company to accept emails for that domain. Problem My problem is that emails generated internally from monitoring software, printer, etc. are being caught by our (defunct) internal server and being delivered to the old mailboxes. I believe that what is happening is that our internal exchange server considers itself to be the authoritive server for newname.com. I think it must be looking in active directory for a mailbox and delivering it internally without ever going outside. Attempt to fix I started to follow the article here: http://support.microsoft.com/kb/321721. I removed the SMTP recipient policy for newname.com, and added a dummy address and made it primary. I also answered yes for updating the associated emails. I then restarted the Microsoft Exchange Routing System and SMTP, but emails are still being routed internally. Is there a way to force the exchange server to route all emails for the domain newname.com to the new hosted service?

    Read the article

  • VNC failure on Xen

    - by BCable
    The following config works and creates a good VM in Xen: # Kernel Setup kernel = "/boot/vmlinuz-2.6.18.8-xenU" # Memory memory = "256" # Disk disk = [ "file:/opt/xen/domains/110/sda1.img,sda1,w", "file:/opt/xen/domains/110/swap.img,sda2,w" ] # container name name = "110" hostname = "boo" # Networking vif = ["type=ieomu, bridge=xenbr0"] # VNC vnc = 1 #vfb = [ 'type=vnc,vncdisplay=2,vnclisten=0.0.0.0,vncpasswd=110' ] # Behavior Settings root = "/dev/sda1" extra = "fastboot" But when I uncomment the VFB line, I get the following error after it hangs for at least 30 seconds: [root@customer 110]# xm create boo.cfg Using config file "./boo.cfg". Error: Device 0 (vkbd) could not be connected. Hotplug scripts not working. Any ideas? Part two of this question: Sometimes it actually works, and a port is opened. When this happens, nmap shows the VNC ports open and I can connect via the VNC client, but it just hangs at "Connection established." and no VNC display shows up. I've tried multiple VNC clients (TightVNC, TightVNC Java Console, RealVNC), but they all fail to connect. Does VNC through Xen require X to be started in order to function? I was under the impression that it would show the console screen, so I'm confused as to why all these issues are occurring. Thanks!

    Read the article

  • Primary zone will not transfer to secondary zone

    - by Matt Beckman
    Using DNS on Windows Server 2008, there is a constant struggle with adding primary and secondary zones. I will add a primary zone to NS1 for a new domain, edit it as needed, and when it's ready add the secondary zone to NS2. However, MOST of the time, the secondary zone remains in an error state, and will never acquire the primary zone data. I have gone back to domains a few weeks after adding them to find out that Windows never propagated the change. Annoying. Anyway, I recently updated SP1 to SP2 thinking this would help, but it hasn't. I added two new domains today, and spent an hour after the secondary zone would just not sync. During that time, the only error in the logs I had seen was for one of them where DNS complained about not being authoritative. In order to eventually resolve the issue, I ended up deleting the primary zone, creating a new primary zone, and hitting "Apply" after each and every field change. For example, after modifying the serial number from "1" to a date appropriate "2010093001", I hit apply, and then the Primary Server (apply), Responsible Person (apply), and finally Name Servers (apply). After I did this, the secondary zone didn't waste any time getting the data. Ideas?

    Read the article

  • Use Mac OS X Server As Development Environment

    - by macinjosh
    I've installed Mac OS X Server 10.6.3 on my laptop to use as my normal OS. I do a lot of web development and thought it would be handy to run OS X Server so I could more easily manage my local development environment (Apache Virtual Hosts, Hostnames for each local site, etc). I'm really enjoying the new setup except for one problem. DNS. My ideal situation would be to add a site (some-site.local) in the Web Service and then go to the DNS Service and add a primary record for the new site. I actually got this working at one point but after a reboot it stopped working! The records look the same as they did before the reboot but the site doesn't come up in Safari. Here is a list of my needs: Need to be able to add new domains at a whim Domains always map to a site on the same box's Web Service Local & External IPs often change It would nice if it worked on any network (i.e. WiFi at the airport or coffee shop) Sites only need to be accessible locally Configuration should stay put even after rebooting I've done some googling and used this as a bit of guide. In the past I've used MAMP and then just a local Apache/PHP/MySQL install with a manually managed hosts file. I'd rather not go back.

    Read the article

  • Ubuntu 13.04 to 13.10: Filesystem check or mount failed [migrated]

    - by SamHuckaby
    I attempted to upgrade from Ubuntu 13.04 to 13.10 today, and mid upgrade the system started flaking out, and eventually locked up entirely. I was forced to restart the computer, and am now unable to get the computer to boot up at all. When I boot currently, it takes me to the GRUB menu, and I can choose to boot normally, or boot in an older version. I have tried several things, which I list below, but no matter what, when I try to finish booting into Ubuntu, I receive the following error: Filesystem check or mount failed. A maintenance shell will now be started. CONTROL-D will terminate this shell and continue booting after re-trying filesystems. Any further errors will be ignored root@ubuntu-computername:~# I have fun fsck -f and everything appears correct, no errors are reported. and it passes all 5 checks. If I run fdisk -l then I get the following information: Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 4096 bytes / 4096 bytes Disk identifier: 0x00010824 Device Boot Start End Blocks Id System /dev/sda1 * 2048 608456703 304227328 83 Linux /dev/sda2 608458750 625141759 8341505 5 Extended Partition 2 does not start on physical sector boundary. /dev/sda5 608458752 625141759 8341504 82 Linux swap / Solaris Disk /dev/sdb: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x0fb4b7e8 Device Boot Start End Blocks Id System /dev/sdb1 8192 625139711 312565760 7 HPFS/NTFS/exFAT I am considering just installing a new OS on the other disk, that currently has nothing on it, and then just attempting to scrape my data off the old disk (thankfully I didn't encrypt the files). Really my question is this: Can I salvage this Ubuntu install, or should I give up and just reinstall?

    Read the article

  • DNS-Based Environment Determination

    - by zvolkov
    Found the following here. The questions is: where can I find more details on how exactly implement this on Windows? Any guide or how-to anybody? Or maybe you can provide your invaluable suggestions? Specifically, how do I make so that "all QA servers would first resolve entries in qa.example.com first and then if that lookup failed they would try example.com" (I'm a dev, not a DNS specialist, but our IT Support has refused to help on this:() Use DNS Based Environment Determination for your servers. Do this by initially splitting your top level domain into a number of sub domains depending on their function, and then creating DNS Service Names in each of the sub domains pointing to the relevant server for that service. Based on the list above we would then have: * clientdb.prod.example.com for Production * clientdb.perf.example.com for Performance Testing * clientdb.qa.example.com for QA * clientdb.dev.example.com for Development Servers then resolve entries in their relevant sub domain by function. That is, all QA servers would first resolve entries in qa.example.com first and then if that lookup failed they would try example.com. This allows you to have a single configuration entry for your client database hostname (clientdb) that would resolve correctly in all environments. This technique has the added advantage of still having global services defined in a common top level domain. This seems to be related to Providing "split horizon" DNS service. Reading that, I see that I will probably need separate DNS Server for each environment. Is this true or does Windows support some form of "tagging" the records to be visible depending on the requestor's IP?

    Read the article

  • apache authentication

    - by veilig
    I'm trying to set up a local webserver on my network. I want to be able to be able to access the webserver from any machine inside my network w/out authenticating. and two extra domains need access to it w/out authenticating. Everyone else I would like to authenticate in. so far, I can get to it from inside my network. and the two extra domains can access my webserver, but everyone else is just hanging. They don't get an authentication or anything. can anyone tell me what I'm doing wrong here? This is part of my apache's site-available file so far: <Directory /path/to/server/> Options Indexes FollowSymLinks -Multiviews Order Deny,Allow Deny from All Allow from 192.168 Allow from localhost Allow from domain1 Allow from domain2 AuthType Basic AuthName "my authentication" AuthUserFile /path/to/file Require valid-user Satisfy Any AllowOverride All <Files .htaccess> Order Allow,Deny Allow from All </Files> </Directory>

    Read the article

  • VNC on Xen failure

    - by BCable
    The following config works and creates a good VM in Xen: # Kernel Setup kernel = "/boot/vmlinuz-2.6.18.8-xenU" # Memory memory = "256" # Disk disk = [ "file:/opt/xen/domains/110/sda1.img,sda1,w", "file:/opt/xen/domains/110/swap.img,sda2,w" ] # container name name = "110" hostname = "boo" # Networking vif = ["type=ieomu, bridge=xenbr0"] # VNC vnc = 1 #vfb = [ 'type=vnc,vncdisplay=2,vnclisten=0.0.0.0,vncpasswd=110' ] # Behavior Settings root = "/dev/sda1" extra = "fastboot" But when I uncomment the VFB line, I get the following error after it hangs for at least 30 seconds: [root@customer 110]# xm create boo.cfg Using config file "./boo.cfg". Error: Device 0 (vkbd) could not be connected. Hotplug scripts not working. Any ideas? Part two of this question: Sometimes it actually works, and a port is opened. When this happens, nmap shows the VNC ports open and I can connect via the VNC client, but it just hangs at "Connection established." and no VNC display shows up. I've tried multiple VNC clients (TightVNC, TightVNC Java Console, RealVNC), but they all fail to connect. Does VNC through Xen require X to be started in order to function? I was under the impression that it would show the console screen, so I'm confused as to why all these issues are occurring. Thanks!

    Read the article

  • Apache2 Manage Server default

    - by Jaime E. Valdez
    I'm trying to setup two domains correctly. I have some issues I hope you can help me. Site one's conf: <VirtualHost myipaddress:80> ServerName www.domain1.com ServerAdmin [email protected] DocumentRoot /home/domain1/public_html </VirtualHost> My other domain conf is: <VirtualHost myipaddress:80> ServerName www.domain2.com ServerAlias *.domain2.com domain2.com ServerAdmin [email protected] DocumentRoot /home/domain2/public_html </VirtualHost> The default site is disabled. The problem is that when accessing "domain2.com" from my browser, it always redirects to "www.domain1.com". It only works when I excplicitly access "www.domain2.com". I have also other domains like "domain1.net", "domain1.info" pointing to my server but at this moment are not configured either setup on Apache yet I can access from browser and always accessing to "www.domain1.com". By the way is there any possible configuration over Apache to handle IP only, I mean if I type "http://myipaddress/" I get the "www.domain1.com"... Arrgh.

    Read the article

  • Extend RAID 1 (HP SmartArray P410i) running Linux

    - by Oliver
    I took over a fairly simple server setup with the following RAID 1 config running Ubuntu 11.10 (Kernel 3.0.0-12-server x86_64): => ctrl all show config Smart Array P410i in Slot 0 (Embedded) (sn: removed) array A (SAS, Unused Space: 1335535 MB) logicaldrive 1 (279.4 GB, RAID 1, OK) physicaldrive 1I:1:1 (port 1I:box 1:bay 1, SAS, 1 TB, OK) physicaldrive 1I:1:2 (port 1I:box 1:bay 2, SAS, 1 TB, OK) Initially there were two 300GB disks that got replaced by 1TB disks and I now have to extend the logical volume to use that extra space. However, when trying to do so I get the following warning: => ctrl slot=0 ld 1 modify size=max Warning: Extension may not be supported on certain operating systems. Performing extension on these operating systems can cause data to become inaccessible. See ACU documentation for details. Continue? (y/n) Is it safe to say yes or am I at risk of corrupting the file system / loosing data? Rearranging and extending the file system afterwards shouldn't be an issue as I can take the server offline and boot from a gparted live disk. Here's the config of the RAID controller in use: => ctrl all show detail Smart Array P410i in Slot 0 (Embedded) Bus Interface: PCI Slot: 0 Serial Number: removed RAID 6 (ADG) Status: Disabled Controller Status: OK Hardware Revision: Rev C Firmware Version: 5.12 Rebuild Priority: Medium Expand Priority: Medium Surface Scan Delay: 15 secs Surface Scan Mode: Idle Wait for Cache Room: Disabled Surface Analysis Inconsistency Notification: Disabled Post Prompt Timeout: 0 secs Cache Board Present: False Drive Write Cache: Disabled SATA NCQ Supported: True And the partition table: Number Start End Size Type File system Flags 1 1049kB 274GB 274GB primary ext4 boot 2 274GB 300GB 25.8GB extended 5 274GB 300GB 25.8GB logical linux-swap(v1)

    Read the article

  • Domain names timing out after VPS IP change

    - by Fourjays
    I rent a CentOS 5 VPS from a UK-based provider, with DirectAdmin also installed. On Thursday night, they carried out planned maintenance to changed the two IPs I had been assigned to two new ones. On Friday, after the change had taken place, I updated my domain name records to reflect the IP change. Since then, all of the domains pointing to the VPS are timing out. Additionally, DirectAdmin was also not responding, but was was resolved by running the ipswap scripts as found in the DirectAdmin knowledgebase. It did not fix my domains though. I have contacted the VPS provider but I have been waiting for a response for some time now. I have checked again, and again, and all the IPs referenced in DirectAdmin are correct. If I go to the server IP in my browser it responds with "Apache is functioning normally." Email accounts on the server are also functioning correctly. But if I access a domain itself, it times out. Running a ping and a DNS look-up, I can confirm the nameserver IPs are correct. If I run a trace route it reaches an IP that is similar to my VPS IPs (last 2 blocks are different) before timing out (it never shows my server IP). I am relatively new to VPS management so don't have a vast wealth of experience with troubleshooting problems on them. I have checked all of the httpd configuration files, which don't seem to have any IP references in them at all. Looking in the Apache error logs, what errors there are do not coincide with times I have tried to access the site. Is this issue at my provider's end? Is there anything else I can check or test, to rule out post-IP-change problems with my server configuration? It was all running fine prior to the IP change.

    Read the article

  • DNS Problems with .pt configuration

    - by Tony S.
    Hello everyone! I have a hosting service with aplus.net, however I had a need to register a .pt domain, but aplus doesnt have this service, so I contacted a .pt registar, called hostingbug.net, to do this. So now I'm owner of a .pt domain, lets say, example.pt. I gave hostingbug the aplus nameservers needed for propagation. And here began the problems. When hostingbug tried to configure, the following error was displayed: <<>> DiG 9.3.6-P1-RedHat-9.3.6-4.P1.el5_4.2 <<>> @64.29.151.221 click.pt. NS +norecurse (1 server found) global options: printcmd connection timed out no servers could be reached And they told me that aplus.net needed to create a new dns zone for .pt domains. So I contacted aplus.net, and they didnt understand this issue, and told me that everything was fine with their servers, and sent me back to hostingbug. So I'm felling like a ping pong ball right now... How can I configure this "new dns zone" for .pt domains? Anyone have clue of how to do this so I can tell them? Or should I cancel aplus services? Thanks in advance

    Read the article

  • Spam in Whois: How is it done and how do I protect my domain?

    - by user2964971
    Yes, there are answered questions regarding spam in Whois. But still unclear: How do they do it? How should I respond? What precautions can I take? For example: Whois for google.com [...] Server Name: GOOGLE.COM.ZOMBIED.AND.HACKED.BY.WWW.WEB-HACK.COM IP Address: 217.107.217.167 Registrar: DOMAINCONTEXT, INC. Whois Server: whois.domaincontext.com Referral URL: http://www.domaincontext.com Server Name: GOOGLE.COM.ZZZZZ.GET.LAID.AT.WWW.SWINGINGCOMMUNITY.COM IP Address: 69.41.185.195 Registrar: TUCOWS DOMAINS INC. Whois Server: whois.tucows.com Referral URL: http://domainhelp.opensrs.net Server Name: GOOGLE.COM.ZZZZZZZZZZZZZ.GET.ONE.MILLION.DOLLARS.AT.WWW.UNIMUNDI.COM IP Address: 209.126.190.70 Registrar: PDR LTD. D/B/A PUBLICDOMAINREGISTRY.COM Whois Server: whois.PublicDomainRegistry.com Referral URL: http://www.PublicDomainRegistry.com Server Name: GOOGLE.COM.ZZZZZZZZZZZZZZZZZZZZZZZZZZ.HAVENDATA.COM IP Address: 50.23.75.44 Registrar: PDR LTD. D/B/A PUBLICDOMAINREGISTRY.COM Whois Server: whois.PublicDomainRegistry.com Referral URL: http://www.PublicDomainRegistry.com Server Name: GOOGLE.COMMAS2CHAPTERS.COM IP Address: 216.239.32.21 Registrar: CRAZY DOMAINS FZ-LLC Whois Server: whois.crazydomains.com Referral URL: http://www.crazydomains.com [...] >>> Last update of whois database: Thu, 05 Jun 2014 02:10:51 UTC <<< [...] >>> Last update of WHOIS database: 2014-06-04T19:04:53-0700 <<< [...]

    Read the article

  • Mindtouch broke my Apache2 virtual host configuration.

    - by grenade
    I installed mindtouch using the instructions here and it seems to have broken my Virtual Host configuration. I have several domains running off the same apache instance and this was working fine but now all my domain names resolve to the virtualhost where mindtouch was installed. So mindtouch made all my domain names point to the new mindtouch instance. Grrr! I use debians default virtual host mechanisms (sites-enabled, etc). Does anyone know what apache directive mindtouch is using to ruin my vh setup? I've scoured all the conf files and there is nothing obvious in apache2.conf or httpd.conf that would cause the behaviour. Did it create a sym-link somewhere that I should destroy? I should add that I uninstalled the mindtouch packages already but apache persists in redirecting all domains to the first one mentioned in the sites-enabled folder. thini:~# apache2ctl -S [Wed Jan 05 13:39:11 2011] [warn] NameVirtualHost *:80 has no VirtualHosts VirtualHost configuration: wildcard NameVirtualHosts and _default_ servers: *:* www.openancestry.org (/etc/apache2/sites-enabled/openancestry.org:1) *:* www.pragmantra.com (/etc/apache2/sites-enabled/pragmantra.com:1) *:* services.pragmantra.com (/etc/apache2/sites-enabled/services.pragmantra.com:1) *:* www.subversionreports.com (/etc/apache2/sites-enabled/subversionreports.com:1) *:* www.thijssen.ch (/etc/apache2/sites-enabled/thijssen.ch:1) Syntax OK

    Read the article

  • Exchange 2003 - how to route ALL mail (including internal) via an external SMTP gateway? (Or, domain

    - by Scandalon
    Short version: Is there a way to have Exchange route all email, including internal AD users that would normally be routed directly, through an external gateway? (SMTP, probably a "Smart Host" in exchange nomenclature.) Longer version: I'm not an email expert/admin/orevencompetent. Inherited an exchange 2003 server, migrating to web-based SaaS provider. To add to the fun, we're also (forced by deadlines) transitioning domains. What we (my boss) wants is any email sent to the new domain to have a copy sent to both domains. Getting mail sent to the new domain/provider to then be copied/forwarded to our old domain/exchange is easy. But we want mail sent from the old domain to the old domain to get sent to the new domain as well. However: If we route all outgoing exchange mail through the new provider gateway, w/ the new domain forwarding to the old, we'd get an email loop. The "solution" desired is for an exchange user that sends to another exchange user to still be sent via the external gateway, which would in turn be sent to the new domain, and copied/forwarded back to the old domain. Is it possible? A bit of a strange request I'm sure. And I expect that what we're attempting to do is DoingItWrong(tm). Any better ideas?

    Read the article

  • DNS Replication on Server 2008 R2

    - by Aaron
    Hi There, I have been trying out public only facing DNS servers with Server 2008 R2 Web - I've wanted to setup at least 2 in a master/slave replication. Using Microsoft DNS I am able to add in the domains into the primary zone on the master DNS server (ns1) and add the records ok and have them visible publically. On ns2 I can then add in the same domain but as a secondary zone and get them to replicate / zone transfer fine. Is there a way inside of Windows to have the slave(s) automatically synchronise all the changes from the master? For example it's ok if i have manually added the domains onto each of the NS's but if i add a new zone on the master i have to add it on the slave before it replicates. I installed Simple DNS and they have a 'Super Master/Slave' which takes care of exactly this whereby if you add a new domain into the primary zone it is automatically created and kept in sync on NS2 but i would have to buy a licence. All this is non active directory if that helps. Can anyone advise if it is possible to do this using Microsoft DNS? Many Thanks in Advance!

    Read the article

  • Cannot load from raid with grub

    - by Andrew Answer
    I have a RAID1 array on my Ubuntu 12.04 LTS and my /sda HDD has been replaced several days ago. I use this commands to replace: # go to superuser sudo bash # see RAID state mdadm -Q -D /dev/md0 # State should be "clean, degraded" # remove broken disk from RAID mdadm /dev/md0 --fail /dev/sda1 mdadm /dev/md0 --remove /dev/sda1 # see partitions fdisk -l # shutdown computer shutdown now # physically replace old disk by new # start system again # see partitions fdisk -l # copy partitions from sdb to sda sfdisk -d /dev/sdb | sfdisk /dev/sda # recreate id for sda sfdisk --change-id /dev/sda 1 fd # add sda1 to RAID mdadm /dev/md0 --add /dev/sda1 # see RAID state mdadm -Q -D /dev/md0 # State should be "clean, degraded, recovering" # to see status you can use cat /proc/mdstat After bebuilding completion "fdisk -l" says what I have not valid partition table /dev/md0. So 1) "update-grub" find only /sda and /sdb Linux, not /md0 2) "dpkg-reconfigure grub-pc" says "GRUB failed to install the following devices /dev/md0" I cannot load my system except from /sdb1 and /sda1, but in DEGRADED mode... This is my partial fdisk -l output: Disk /dev/sdb: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000667ca Device Boot Start End Blocks Id System /dev/sdb1 * 63 940910984 470455461 fd Linux raid autodetect /dev/sdb2 940910985 976768064 17928540 5 Extended /dev/sdb5 940911048 976768064 17928508+ 82 Linux swap / Solaris Disk /dev/md0: 481.7 GB, 481746288640 bytes 2 heads, 4 sectors/track, 117613840 cylinders, total 940910720 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/md0 doesn't contain a valid partition table Anybody can resolve this issue? I have big headache with this.

    Read the article

< Previous Page | 63 64 65 66 67 68 69 70 71 72 73 74  | Next Page >