Search Results

Search found 4103 results on 165 pages for 'n ary tree'.

Page 67/165 | < Previous Page | 63 64 65 66 67 68 69 70 71 72 73 74  | Next Page >

  • When to choose which machine learning classifier?

    - by LM
    Suppose I'm working on some classification problem. (Fraud detection and comment spam are two problems I'm working on right now, but I'm curious about any classification task in general.) How do I know which classifier I should use? (Decision tree, SVM, Bayesian, logistic regression, etc.) In which cases is one of them the "natural" first choice, and what are the principles for choosing that one? Examples of the type of answers I'm looking for (from Manning et al.'s "Introduction to Information Retrieval book": http://nlp.stanford.edu/IR-book/html/htmledition/choosing-what-kind-of-classifier-to-use-1.html): a. If your data is labeled, but you only have a limited amount, you should use a classifier with high bias (for example, Naive Bayes). [I'm guessing this is because a higher-bias classifier will have lower variance, which is good because of the small amount of data.] b. If you have a ton of data, then the classifier doesn't really matter so much, so you should probably just choose a classifier with good scalability. What are other guidelines? Even answers like "if you'll have to explain your model to some upper management person, then maybe you should use a decision tree, since the decision rules are fairly transparent" are good. I care less about implementation/library issues, though. Also, for a somewhat separate question, besides standard Bayesian classifiers, are there 'standard state-of-the-art' methods for comment spam detection (as opposed to email spam)? [Not sure if stackoverflow is the best place to ask this question, since it's more machine learning than actual programming -- if not, any suggestions for where else?]

    Read the article

  • What is the best approach to 2D collision detection on the iPhone?

    - by Magic Bullet Dave
    Been working on this problem of collision detection and there appears to be 3 main approaches I could take: Sprite and mask approach. (AND the overlap of the sprites and check for a non-zero number in the resulting sprite pixel data). Bounding circles, rectangles or polygons. (Create one or more shapes that enclose the sprites and do the basic maths to check for overlaps). Use an existing sprite library. The first approach, even though it would have been the way I would have done it in the old days of 16x16 sprite blocks, it appears that there just isn’t an easy way of getting at the individual image pixel data and/or alpha channel within Quartz (or OPENGL for that matter). Detecting the overlap of the bounding box is easy, but then creating a 3rd image from the overlap and then testing it for pixels is complicated and my gut feel is that even if we could get it to work would be slow. Am I missing something neat here? The second approach involves dividing up our sprites into several polygons and testing them for overlaps. The more polygons the more accurate the collision detection. The benefit is that it is fast, and can be accurate. The downside is it makes the sprite creation more complicated. i.e., we have to create the polygons for each sprite. For speed the best approach is to create a tree of polygons. The 3rd approach I’m not sure about as it involves buying code (or using an open source licence). I am not sure what the best library to use is or whether this would make life easier or give us a problem integrating this into our app. So in short I am favouring the polygon and tree approach and would appreciate you views on this before I go and write lots of code. Best regards Dave

    Read the article

  • Duplicate elements when adding XElement to XDocument

    - by Andy
    I'm writing a program in C# that will go through a bunch of config.xml files and update certain elements, or add them if they don't exist. I have the portion down that updates an element if it exists with this code: XDocument xdoc = XDocument.Parse(ReadFile(_file)); XElement element = xdoc.Elements("project").Elements("logRotator") .Elements("daysToKeep").Single(); element.Value = _DoRevert; But I'm running into issues when I want to add an element that doesn't exist. Most of the time part of the tree is in place and when I use my code it adds another identical tree, and that causes the program reading the xml to blow up. here is how I am attempting to do it xdoc.Element("project").Add(new XElement("logRotator", new XElement("daysToKeep", _day))); and that results in a structure like this(The numToKeep tag was already there): <project> <logRotator> <daysToKeep>10</daysToKeep> </logRotator> <logRotator> <numToKeep>13</numToKeep> </logRotator> </project> but this is what I want <project> <logRotator> <daysToKeep>10</daysToKeep> <numToKeep>13</numToKeep> </logRotator> </project>

    Read the article

  • Rtti data manipulation and consistency in Delphi 2010

    - by Coco
    Has anyone an idea, how I can make TValue using a reference to the original data? In my serialization project, I use (as suggested in XML-Serialization) a generic serializer which stores TValues in an internal tree-structure (similar to the MemberMap in the example). This member-tree should also be used to create a dynamic setup form and manipulate the data. My idea was to define a property for the Data: TDataModel <T> = class {...} private FData : TValue; function GetData : T; procedure SetData (Value : T); public property Data : T read GetData write SetData; end; The implementation of the GetData, SetData Methods: procedure TDataModel <T>.SetData (Value : T); begin FData := TValue.From <T> (Value); end; procedure TDataModel <T>.GetData : T; begin Result := FData.AsType <T>; end; Unfortunately, the TValue.From method always makes a copy of the original data. So whenever the application makes changes to the data, the DataModel is not updated and vice versa if I change my DataModel in a dynamic form, the original data is not affected. Sure I could always use the Data property before and after changing anything, but as I use lot of Rtti inside my DataModel, I do not realy want to do this anytime. Perhaps someone has a better suggestion?

    Read the article

  • Why does a sub-class class of a class have to be static in order to initialize the sub-class in the

    - by Alex
    So, the question is more or less as I wrote. I understand that it's probably not clear at all so I'll give an example. I have class Tree and in it there is the class Node, and the empty constructor of Tree is written: public class RBTree { private RBNode head; public RBTree(RBNode head,RBTree leftT,RBTree rightT){ this.head=head; this.head.leftT.head.father = head; this.head.rightT.head.father = head; } public RBTree(RBNode head){ this(head,new RBTree(),new RBTree()); } public RBTree(){ this(new RBNode(),null,null); } public class RBNode{ private int value; private boolean isBlack; private RBNode father; private RBTree leftT; private RBTree rightT; } } Eclipse gives me the error: "No enclosing instance of type RBTree is available due to some intermediate constructor invocation" for the "new RBTree()" in the empty constructor. However, if I change the RBNode to be a static class, there is no problem. So why is it working when the class is static. BTW, I found an easy solution for the cunstructor: public RBTree(){ this.head = new RBNode(); } So, I have no idea what is the problem in the first piece of code.

    Read the article

  • C++ destructos causing crash's

    - by larsonator
    ok, so i got a some what intricate program that simulates the uni systems of students, units, and students enrolling in units. Students are stored in a binary search tree, Units are stored in a standard list. Student has a list of Unit Pointers, to store which units he/she is enrolled in Unit has a list of Student pointers, to store students which are enrolled in that unit. The unit collections (storing units in a list) as made as a static variable where the main function is, as is the Binary search tree of students. when its finaly time to close the program, i call the destructors of each. but at some stage, during the destructors on the unit side, Unhandled exception at 0x002e4200 in ClassAllocation.exe: 0xC0000005: Access violation reading location 0x00000000. UnitCollection destructor: UnitCol::~UnitCol() { list<Unit>::iterator itr; for(itr = UnitCollection.begin(); itr != UnitCollection.end();) { UnitCollection.pop_front(); itr = UnitCollection.begin(); } } Unit Destructor Unit::~Unit() { } now i got the same sorta problem on the student side of things BST destructors void StudentCol::Destructor(const BTreeNode * r) { if(r!= 0) { Destructor(r->getLChild()); Destructor(r->getRChild()); delete r; } } StudentCol::~StudentCol() { Destructor(root); } Student Destructor Student::~Student() { } so yeah any help would be greatly appreciated

    Read the article

  • Dynamic Hierarchical Javascript Object Loop

    - by user1684586
    var treeData = {"name" : "A", "children" : [ {"name" : "B", "children": [ {"name" : "C", "children" :[]} ]} ]}; THE ARRAY BEFORE SHOULD BE EMPTY. THE ARRAY AFTER SHOULD BE POPULATED DEPENDING ON THE NUMBER OF NODES NEEDED THAT WILL BE DEFINED FROM A DYNAMIC VALUE THAT IS PASSED. I would like to build the hierarchy dynamically with each node created as a layer/level in the hierarchy having its own array of nodes. THIS SHOULD FORM A TREE STRUCTURE. This is hierarchy structure is described in the above code. This code has tree level simple for demonstrating the layout of the hierarchy of values. There should be a root node, and an undefined number of nodes and levels to make up the hierarchy size. Nothing should be fixed besides the root node. I do not need to read the hierarchy, I need to construct it. The array should start {"name" : "A", "children" : []} and every new node as levels would be created {"name" : "A", "children" : [HERE-{"name" : "A", "children" : []}]}. In the child array, going deeper and deeper. Basically the array should have no values before the call, except maybe the root node. After the function call, the array should comprise of the required nodes of a number that may vary with every call. Every child array will contain one or more node values. There should be a minimum of 2 node levels, including the root. It should initially be a Blank canvas, that is no predefined array values.

    Read the article

  • C++ destructors causing crash's

    - by larsonator
    ok, so i got a some what intricate program that simulates the uni systems of students, units, and students enrolling in units. Students are stored in a binary search tree, Units are stored in a standard list. Student has a list of Unit Pointers, to store which units he/she is enrolled in Unit has a list of Student pointers, to store students which are enrolled in that unit. The unit collections (storing units in a list) as made as a static variable where the main function is, as is the Binary search tree of students. when its finaly time to close the program, i call the destructors of each. but at some stage, during the destructors on the unit side, Unhandled exception at 0x002e4200 in ClassAllocation.exe: 0xC0000005: Access violation reading location 0x00000000. UnitCollection destructor: UnitCol::~UnitCol() { list<Unit>::iterator itr; for(itr = UnitCollection.begin(); itr != UnitCollection.end();) { UnitCollection.pop_front(); itr = UnitCollection.begin(); } } Unit Destructor Unit::~Unit() { } now i got the same sorta problem on the student side of things BST destructors void StudentCol::Destructor(const BTreeNode * r) { if(r!= 0) { Destructor(r->getLChild()); Destructor(r->getRChild()); delete r; } } StudentCol::~StudentCol() { Destructor(root); } Student Destructor Student::~Student() { } so yeah any help would be greatly appreciated

    Read the article

  • I did my own web framework: now, how keep it sync with applications? must I use versions?

    - by Daniel Koch
    ... and I did the first web application using it, now I'm going to create the second. In this first web application I enhanced the framework's core library with new things and promptly updated framework branch. I'm using bazaar to keep framework and web application committed. The application was in the beginning, a full branch of framework source tree, now I'm updating framework manually at every change on core files. (copying changed files from web app to framework's branch). With this second web application that I'm going to create, I need to know about versions (or revisions) which the application is based. If I found a bug in this version I can fix and then sync files with first web application no worrying: functions will be the same to this application. If I'm going to make changes in core (new behavior, new functions in library or something new in source tree) it must be named as "new version". What's the best way to do this? Because I'm using a Distributed Version Control System (bazaar), I'm not dealing with VERSIONS, but revision numbers that change every time. Please fresh my mind with new ideas.

    Read the article

  • macro collapse all in solution visual studio 2010

    - by rod
    Hi All, I found the CollapseAll macro online that has worked for me in vs2005 and vs2008. However, this half way works in vs2010. It looks like it only collapses the top nodes and not any subnodes that may be expanded? any ideas? Thanks, rod. Sub CollapseAll() ' Get the the Solution Explorer tree Dim UIHSolutionExplorer As UIHierarchy UIHSolutionExplorer = DTE.Windows.Item(Constants.vsext_wk_SProjectWindow).Object() ' Check if there is any open solution If (UIHSolutionExplorer.UIHierarchyItems.Count = 0) Then ' MsgBox("Nothing to collapse. You must have an open solution.") Return End If ' Get the top node (the name of the solution) Dim UIHSolutionRootNode As UIHierarchyItem UIHSolutionRootNode = UIHSolutionExplorer.UIHierarchyItems.Item(1) UIHSolutionRootNode.DTE.SuppressUI = True ' Collapse each project node Dim UIHItem As UIHierarchyItem For Each UIHItem In UIHSolutionRootNode.UIHierarchyItems 'UIHItem.UIHierarchyItems.Expanded = False If UIHItem.UIHierarchyItems.Expanded Then Collapse(UIHItem) End If Next ' Select the solution node, or else when you click ' on the solution window ' scrollbar, it will synchronize the open document ' with the tree and pop ' out the corresponding node which is probably not what you want. UIHSolutionRootNode.Select(vsUISelectionType.vsUISelectionTypeSelect) UIHSolutionRootNode.DTE.SuppressUI = False End Sub Private Sub Collapse(ByVal item As UIHierarchyItem) For Each eitem As UIHierarchyItem In item.UIHierarchyItems If eitem.UIHierarchyItems.Expanded AndAlso eitem.UIHierarchyItems.Count > 0 Then Collapse(eitem) End If Next item.UIHierarchyItems.Expanded = False End Sub End Module

    Read the article

  • TicTacToe strategic reduction

    - by NickLarsen
    I decided to write a small program that solves TicTacToe in order to try out the effect of some pruning techniques on a trivial game. The full game tree using minimax to solve it only ends up with 549,946 possible games. With alpha-beta pruning, the number of states required to evaluate was reduced to 18,297. Then I applied a transposition table that brings the number down to 2,592. Now I want to see how low that number can go. The next enhancement I want to apply is a strategic reduction. The basic idea is to combine states that have equivalent strategic value. For instance, on the first move, if X plays first, there is nothing strategically different (assuming your opponent plays optimally) about choosing one corner instead of another. In the same situation, the same is true of the center of the walls of the board, and the center is also significant. By reducing to significant states only, you end up with only 3 states for evaluation on the first move instead of 9. This technique should be very useful since it prunes states near the top of the game tree. This idea came from the GameShrink method created by a group at CMU, only I am trying to avoid writing the general form, and just doing what is needed to apply the technique to TicTacToe. In order to achieve this, I modified my hash function (for the transposition table) to enumerate all strategically equivalent positions (using rotation and flipping functions), and to only return the lowest of the values for each board. Unfortunately now my program thinks X can force a win in 5 moves from an empty board when going first. After a long debugging session, it became apparent to me the program was always returning the move for the lowest strategically significant move (I store the last move in the transposition table as part of my state). Is there a better way I can go about adding this feature, or a simple method for determining the correct move applicable to the current situation with what I have already done?

    Read the article

  • How to calculate commision based on referred memebrs?

    - by RAJKISHOR SAHU
    Hello everybody, I am developing a small software in C# WPF for a consultancy which does chain system business. I have coded tree structure to show who referred whom. Now it has commission depending on level. If 1 referred 2 & 3 then 1 will get level-1 commission. If 2 referred 4, 5 & 3 referred 6, 7 then 1 will receive level-2 commission. This chain will go on to certain total number. My problem is how I would implement this logic; I am able to calculate who has referred how many members via UDF written for adding TreeViewItem to TreeView. Or tell me how I can count items in treeview in certain level? Node adding UDF: public void AddNodes(int uid, TreeViewItem tSubNode) { string query = "select fullname, id from members where refCode=" + uid + ";"; MySqlCommand cmd = new MySqlCommand(query, db.conn); MySqlDataAdapter _DA = new MySqlDataAdapter(cmd); DataTable _DT = new DataTable(); tSubNode.IsExpanded = true; _DA.Fill(_DT); foreach (DataRow _dr in _DT.Rows) { TreeViewItem tNode = new TreeViewItem(); tNode.Header = _dr["fullname"].ToString()+" ("+_dr["id"].ToString()+")"; tSubNode.Items.Add(tNode); if (db.HasMembers(Convert.ToInt32(_dr["id"].ToString()))) { AddNodes(Convert.ToInt32(_dr["id"]), tNode); } } //This line tracks who has referred how many members Console.WriteLine("Tree node Count : "+tSubNode.Items.Count.ToString()+", UID "+uid); } Help me PLEASE!!!!

    Read the article

  • NoSQL for filesystem storage organization and replication?

    - by wheaties
    We've been discussing design of a data warehouse strategy within our group for meeting testing, reproducibility, and data syncing requirements. One of the suggested ideas is to adapt a NoSQL approach using an existing tool rather than try to re-implement a whole lot of the same on a file system. I don't know if a NoSQL approach is even the best approach to what we're trying to accomplish but perhaps if I describe what we need/want you all can help. Most of our files are large, 50+ Gig in size, held in a proprietary, third-party format. We need to be able to access each file by a name/date/source/time/artifact combination. Essentially a key-value pair style look-up. When we query for a file, we don't want to have to load all of it into memory. They're really too large and would swamp our server. We want to be able to somehow get a reference to the file and then use a proprietary, third-party API to ingest portions of it. We want to easily add, remove, and export files from storage. We'd like to set up automatic file replication between two servers (we can write a script for this.) That is, sync the contents of one server with another. We don't need a distributed system where it only appears as if we have one server. We'd like complete replication. We also have other smaller files that have a tree type relationship with the Big files. One file's content will point to the next and so on, and so on. It's not a "spoked wheel," it's a full blown tree. We'd prefer a Python, C or C++ API to work with a system like this but most of us are experienced with a variety of languages. We don't mind as long as it works, gets the job done, and saves us time. What you think? Is there something out there like this?

    Read the article

  • PEAR:DB connection parameters

    - by Markus Ossi
    I just finished my first PHP site and now I have a security-related question. I used PEAR:DB for the database connection and made a separate parameter file for it. How should I hide this parameter file? I found a guide (http://www.kitebird.com/articles/peardb.html) that says: Another way to specify connection parameters is to put them in a separate file that you reference from your main script. ... It also enables you to move the parameter file outside of the web server's document tree, which prevents its contents from being displayed literally if the server becomes misconfigured and starts serving PHP scripts as plain text. I have now put my file in a directory like this /include/db_parameters.inc However, if I go to this URL, the web server shows me the contents of the file including my database username and password. From what I've understood, I should protect this file so, that even though PHP would be served as text, nobody could read this. What does outside of web server's document tree mean here? Put the PHP file out of public_html directory altogether deeper into the server file system? Some CHMOD?

    Read the article

  • Why does the JSF action tag handler in JSP invoke rendering immediately after creation?

    - by Pentius
    Dear fellows, I read the article "Improving JSF by Dumping JSP" from Hans Bergsten. There I read the following: The JSP container processes the page and invokes the JSF action tag handlers as they are encountered. A JSF tag handler looks for the JSF component it represents in the component tree. If it can't find the component, it creates it and adds it to the component tree. It then asks the component to render itself. and furthermore On the first request, the action creates its component and asks it to render itself. I understand that the immediate rendering after the creation of the component is the problem here (The reference to the input component can't be resolved in the example). That's one point, why JSF doesn't fit with JSP. But it reads as if the action tag handler itself would ask the component to render. Or is it JSP that triggers the rendering directly after the action tag handler created the component. If it is the action tag handler, I don't understand, why this is the fault of JSP. What is different here than from JSF intended? Thanks for your help, I need this for my thesis.

    Read the article

  • Searching in graphs trees with Depth/Breadth first/A* algorithms

    - by devoured elysium
    I have a couple of questions about searching in graphs/trees: Let's assume I have an empty chess board and I want to move a pawn around from point A to B. A. When using depth first search or breadth first search must we use open and closed lists ? This is, a list that has all the elements to check, and other with all other elements that were already checked? Is it even possible to do it without having those lists? What about A*, does it need it? B. When using lists, after having found a solution, how can you get the sequence of states from A to B? I assume when you have items in the open and closed list, instead of just having the (x, y) states, you have an "extended state" formed with (x, y, parent_of_this_node) ? C. State A has 4 possible moves (right, left, up, down). If I do as first move left, should I let it in the next state come back to the original state? This, is, do the "right" move? If not, must I transverse the search tree every time to check which states I've been to? D. When I see a state in the tree where I've already been, should I just ignore it, as I know it's a dead end? I guess to do this I'd have to always keep the list of visited states, right? E. Is there any difference between search trees and graphs? Are they just different ways to look at the same thing?

    Read the article

  • Creating a Linq->HQL provider

    - by Mike Q
    Hi all, I have a client application that connects to a server. The server uses hibernate for persistence and querying so it has a set of annotated hibernate objects for persistence. The client sends HQL queries to the server and gets responses back. The client has an auto-generated set of objects that match the server hibernate objects for query results and basic persistence. I would like to support using Linq to query as well as Hql as it makes the queries typesafe and quicker to build (no more typos in HQL string queries). I've looked around at the following but I can't see how to get them to fit with what I have. NHibernate's Linq provider - requires using NHibernate ISession and ISessionFactory, which I don't have LinqExtender - requires a lot of annotations on the objects and extending a base type, too invasive What I really want is something that will generate give me a nice easy to process structure to build the HQL queries from. I've read most of a 15 page article written by one of the C# developers on how to create custom providers and it's pretty fraught, mainly because of the complexity of the expression tree. Can anyone suggest an approach for implementing Linq - HQL translation? Perhaps a library that will the cleanup of the expression tree into something more SQL/HQLish. I would like to support select/from/where/group by/order by/joins. Not too worried about subqueries.

    Read the article

  • When is the reintegrate option really necessary?

    - by Tor Hovland
    If you always sync a feature branch before you merge it back, why do you really have to use the --reintegrate option? The Subversion book says: When merging your branch back to the trunk, however, the underlying mathematics is quite different. Your feature branch is now a mishmosh of both duplicated trunk changes and private branch changes, so there's no simple contiguous range of revisions to copy over. By specifying the --reintegrate option, you're asking Subversion to carefully replicate only those changes unique to your branch. (And in fact, it does this by comparing the latest trunk tree with the latest branch tree: the resulting difference is exactly your branch changes!) So the --reintegrate option only merges the changes that are unique to the feature branch. But if you always sync before merge (which is a recommended practice, in order to deal with any conflicts on the feature branch), then the only changes between the branches are the changes that are unique to the feature branch, right? And if Subversion tries to merge code that is already on the target branch, it will just do nothing, right? In this blog post, Mark Phippard writes: http://blogs.open.collab.net/svn/2008/07/subversion-merg.html If we include those synched revisions, then we merge back changes that already exist in trunk. This yields unnecessary and confusing conflicts. Can somebody give me an example of when dropping reintegrate gives me unnecessary conflicts?

    Read the article

  • Searching Natural Language Sentence Structure

    - by Cerin
    What's the best way to store and search a database of natural language sentence structure trees? Using OpenNLP's English Treebank Parser, I can get fairly reliable sentence structure parsings for arbitrary sentences. What I'd like to do is create a tool that can extract all the doc strings from my source code, generate these trees for all sentences in the doc strings, store these trees and their associated function name in a database, and then allow a user to search the database using natural language queries. So, given the sentence "This uploads files to a remote machine." for the function upload_files(), I'd have the tree: (TOP (S (NP (DT This)) (VP (VBZ uploads) (NP (NNS files)) (PP (TO to) (NP (DT a) (JJ remote) (NN machine)))) (. .))) If someone entered the query "How can I upload files?", equating to the tree: (TOP (SBARQ (WHADVP (WRB How)) (SQ (MD can) (NP (PRP I)) (VP (VB upload) (NP (NNS files)))) (. ?))) how would I store and query these trees in a SQL database? I've written a simple proof-of-concept script that can perform this search using a mix of regular expressions and network graph parsing, but I'm not sure how I'd implement this in a scalable way. And yes, I realize my example would be trivial to retrieve using a simple keyword search. The idea I'm trying to test is how I might take advantage of grammatical structure, so I can weed-out entries with similar keywords, but a different sentence structure. For example, with the above query, I wouldn't want to retrieve the entry associated with the sentence "Checks a remote machine to find a user that uploads files." which has similar keywords, but is obviously describing a completely different behavior.

    Read the article

  • Where are the network boundaries in the Java Connector Architecture (JCA)?

    - by Laird Nelson
    I am writing a JCA resource adapter. I'm also, as I go, trying to fully understand the connection management portion of the JCA specification. As a thought experiment, pretend that the only client of this adapter will be a Swing Java Application Client located on a different machine. Also assume that the resource adapter will communicate with its "enterprise information system" (EIS) over the network as well. As I understand the JCA specification, the .rar file is deployed to the application server. The application server creates the .rar file's implementation of the ManagedConnectionFactory interface. It then asks it to produce a connection factory, which is the opaque object that is deployed to JNDI for the user to use to obtain a connection to the resource. (In the case of JDBC, the connection factory is a javax.sql.DataSource.) It is a requirement that the connection factory retain a reference to the application-server-supplied ConnectionManager, which, in turn, is required to be Serializable. This makes sense--in order for the connection factory to be stored in JNDI, it must be serializable, and in order for it to keep a reference to the ConnectionManager, the ConnectionManager must also be serializable. So fine, this little object graph gets installed in the application client's JNDI tree. This is where I start to get queasy. Is the ConnectionManager--the piece supplied by the application server that is supposed to handle connection management, sharing, pooling, etc.--wholly present on the client at this point? One of its jobs is to create ManagedConnection instances, and a ManagedConnection is not required to be Serializable, and the user connection handles it vends are also not required to be Serializable. That suggests to me that the whole connection pooling machinery is shipped wholesale to the application client and stuffed into its JNDI tree. Does this all mean that JCA interactions from the client side bypass the server-side componentry of the application server? Where are the network boundaries in the JCA API?

    Read the article

  • git push says everything up to date when it definitely is not

    - by Wolf
    I have a public repository. No one else has forked, pulled, or done anything else to it. I made some minor changes to one file, successfully committed them, and tried to push. It says 'Everything up-to-date'. There are no branches. I'm very, very new to git and I don't understand what on earth is going on. git remote show origin tells me: HEAD branch: master Remote branch: master tracked Local ref configured for 'git push': master pushes to master (up to date) Any ideas what I can do to make this understand that it's NOT up to date? Thanks Updates: git status: # On branch master # Untracked files: # (use "git add ..." to include in what will be committed) # # histmarkup.el # vendor/yasnippet-0.6.1c/snippets/ no changes added to commit (use "git add" and/or "git commit -a") git branch -a: * master remotes/origin/master git fsck: dangling tree 105cb101ca1a4d2cbe1b5c73eb4a238e22cb4998 dangling tree 85bd0461f0fcb1618d46c8a80d3a4a7932de34bb Update 2: I re-opened the modified file, and the modifications I KNOW I had made were gone. So I added them again, went through the rigamarole of git status, git add filename, git commit -m "(message)", and git push origin master, and all of a sudden it works the way it's supposed to.

    Read the article

  • Longer execution through Java shell than console?

    - by czuk
    I have a script in Python which do some computations. When I run this script in console it takes about 7 minutes to complete but when I run it thought Java shell it takes three times longer. I use following code to execute the script in Java: this.p = Runtime.getRuntime().exec("script.py --batch", envp); this.input = new BufferedReader(new InputStreamReader(p.getInputStream())); this.output = new BufferedWriter(new OutputStreamWriter(p.getOutputStream())); this.error = new BufferedReader(new InputStreamReader(p.getErrorStream())); Do you have any suggestion why the Python script runs three time longer in Java than in a console? update The computation goes as follow: Java sends data to the Python. Python reads the data. Python generates a decision tree --- this is a long operation. Python sends a confirmation that the tree is ready. Java receives the confirmation. Later there is a series of communications between Java and Python but it takes only several second.

    Read the article

  • How to Load assembly to AppDomain with all references recursively?

    - by abatishchev
    I want to load to new AppDomin some assembly which has a complex references tree (MyDll.dll - Microsoft.Office.Interop.Excel.dll - Microsoft.Vbe.Interop.dll - Office.dll - stdole.dll) As far as I understood, when an assembly is been loaded to AppDomain, it's references would not be loaded automatically, and I have to load them manually. So when I do: string dir = @"SomePath"; // different from AppDomain.CurrentDomain.BaseDirectory string path = System.IO.Path.Combine(dir, "MyDll.dll"); AppDomainSetup setup = AppDomain.CurrentDomain.SetupInformation; setup.ApplicationBase = dir; AppDomain domain = AppDomain.CreateDomain("SomeAppDomain", null, setup); domain.Load(AssemblyName.GetAssemblyName(path)); and got FileNotFoundException: Could not load file or assembly 'MyDll, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified. I think the key word is one of its dependencies. Ok, I do next before domain.Load(AssemblyName.GetAssemblyName(path)); foreach (AssemblyName refAsmName in Assembly.ReflectionOnlyLoadFrom(path).GetReferencedAssemblies()) { domain.Load(refAsmName); } But got FileNotFoundException again, on another (referenced) assembly. How to load all references recursively? Have I to create references tree before loading root assembly? How to get an assembly's references without loading it?

    Read the article

  • Java/JAXB: Accessing property of object in a list

    - by Mark Lewis
    Hello Using JAXB I've created a series of classes which represent my XML schema. Validating against the schema an XML file has thus become a 'tree' of java objects representing the XML. Now I'd like to access, delete and add an object of one the created types in my tree. If I've got classes' methods arranged like this: RootType class has: public List<FQType> getFq() { // and setter return fq; } FQType class has: public RemapType getRemap() { // and setter return remap; } RemapType class has: public String getSource() { // and setter return source; } What's the most concise way to code reading and writing of the 'source' member of a RemapType instance in an FQType instance with, say, fqtypeID=1, in an array of type RootType (in which RootType instances also each have rootID)? Currently I'm using a for loop Iterator in which is an if rootID = mySelectedRootID. In the if I nest a second for loop Iterator over the contained FQType instances and in that a second if fqTypeID = mySelectedFQTypeID. IE for loop iterator/if statement pairs to recognise the object of desire. With all the bells and whistles this way is nearly 15 lines of code to access a data type - can I do this in one line? Thanks

    Read the article

  • Modifying bundled properties from visitor

    - by ravenspoint
    How should I modify the bundled properties of a vertex from inside a visitor? I would like to use the simple method of sub-scripting the graph, but the graph parameter passed into the visitor is const, so compiler disallows changes. I can store a reference to the graph in the visitor, but this seems weird. /** A visitor which identifies vertices as leafs or trees */ class bfs_vis_leaf_finder:public default_bfs_visitor { public: /** Constructor @param[in] total reference to int variable to store total number of leaves @param[in] g reference to graph ( used to modify bundled properties ) */ bfs_vis_leaf_finder( int& total, graph_t& g ) : myTotal( total ), myGraph( g ) { myTotal = 0; } /** Called when the search finds a new vertex If the vertex has no children, it is a leaf and the total leaf count is incremented */ template <typename Vertex, typename Graph> void discover_vertex( Vertex u, Graph& g) { if( out_edges( u, g ).first == out_edges( u, g ).second ) { myTotal++; //g[u].myLevel = s3d::cV::leaf; myGraph[u].myLevel = s3d::cV::leaf; } else { //g[u].myLevel = s3d::cV::tree; myGraph[u].myLevel = s3d::cV::tree; } } int& myTotal; graph_t& myGraph; };

    Read the article

< Previous Page | 63 64 65 66 67 68 69 70 71 72 73 74  | Next Page >