Search Results

Search found 4345 results on 174 pages for 'partition'.

Page 67/174 | < Previous Page | 63 64 65 66 67 68 69 70 71 72 73 74  | Next Page >

  • Grub 'Read Error' - Only Loads with LiveCD

    - by Ryan Sharp
    Problem After installing Ubuntu to complete my Windows 7/Ubuntu 12.04 dual-boot setup, Grub just wouldn't load at all unless I boot from the LiveCD. Afterwards, everything works completely normal. However, this workaround isn't a solution and I'd like to be able to boot without the aid of a disc. Fdisk -l Using the fdisk -l command, I am given the following: Disk /dev/sda: 64.0 GB, 64023257088 bytes 255 heads, 63 sectors/track, 7783 cylinders, total 125045424 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x324971d1 Device Boot Start End Blocks Id System /dev/sda1 2048 206847 102400 7 HPFS/NTFS/exFAT /dev/sda2 208896 48957439 24374272 7 HPFS/NTFS/exFAT /dev/sda3 * 48959486 124067839 37554177 5 Extended /dev/sda5 48959488 124067839 37554176 83 Linux Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xc0ee6a69 Device Boot Start End Blocks Id System /dev/sdb1 1024208894 1953523711 464657409 5 Extended /dev/sdb3 * 2048 1024206847 512102400 7 HPFS/NTFS/exFAT /dev/sdb5 1024208896 1937897471 456844288 83 Linux /dev/sdb6 1937899520 1953523711 7812096 82 Linux swap / Solaris Partition table entries are not in disk order Disk /dev/sdc: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x292eee23 Device Boot Start End Blocks Id System /dev/sdc1 2048 625141759 312569856 7 HPFS/NTFS/exFAT Bootinfoscript I've used the BootInfoScript, and received the following output: Boot Info Script 0.61 [1 April 2012] ============================= Boot Info Summary: =============================== => Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 1 of the same hard drive for core.img. core.img is at this location and looks for (,msdos5)/boot/grub on this drive. => Grub2 (v1.99) is installed in the MBR of /dev/sdb and looks at sector 1 of the same hard drive for core.img. core.img is at this location and looks for (,msdos5)/boot/grub on this drive. => Windows is installed in the MBR of /dev/sdc. sda1: __________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: /bootmgr /Boot/BCD sda2: __________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Windows 7 Boot files: /bootmgr /Boot/BCD /Windows/System32/winload.exe sda3: __________________________________________________________________________ File system: Extended Partition Boot sector type: Unknown Boot sector info: sda5: __________________________________________________________________________ File system: ext4 Boot sector type: - Boot sector info: Operating System: Ubuntu 12.04.1 LTS Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img sdb1: __________________________________________________________________________ File system: Extended Partition Boot sector type: - Boot sector info: sdb5: __________________________________________________________________________ File system: ext4 Boot sector type: - Boot sector info: Operating System: Boot files: sdb6: __________________________________________________________________________ File system: swap Boot sector type: - Boot sector info: sdb3: __________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: According to the info in the boot sector, sdb3 starts at sector 200744960. But according to the info from fdisk, sdb3 starts at sector 2048. According to the info in the boot sector, sdb3 has 823461887 sectors, but according to the info from fdisk, it has 1024204799 sectors. Operating System: Boot files: sdc1: __________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: ============================ Drive/Partition Info: ============================= Drive: sda _____________________________________________________________________ Disk /dev/sda: 64.0 GB, 64023257088 bytes 255 heads, 63 sectors/track, 7783 cylinders, total 125045424 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sda1 2,048 206,847 204,800 7 NTFS / exFAT / HPFS /dev/sda2 208,896 48,957,439 48,748,544 7 NTFS / exFAT / HPFS /dev/sda3 * 48,959,486 124,067,839 75,108,354 5 Extended /dev/sda5 48,959,488 124,067,839 75,108,352 83 Linux Drive: sdb _____________________________________________________________________ Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sdb1 1,024,208,894 1,953,523,711 929,314,818 5 Extended /dev/sdb5 1,024,208,896 1,937,897,471 913,688,576 83 Linux /dev/sdb6 1,937,899,520 1,953,523,711 15,624,192 82 Linux swap / Solaris /dev/sdb3 * 2,048 1,024,206,847 1,024,204,800 7 NTFS / exFAT / HPFS Drive: sdc _____________________________________________________________________ Disk /dev/sdc: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sdc1 2,048 625,141,759 625,139,712 7 NTFS / exFAT / HPFS "blkid" output: ________________________________________________________________ Device UUID TYPE LABEL /dev/sda1 A48056DF8056B80E ntfs System Reserved /dev/sda2 A8C6D6A4C6D671D4 ntfs Windows /dev/sda5 fd71c537-3715-44e1-b1fe-07537e22b3dd ext4 /dev/sdb3 6373D03D0A3747A8 ntfs Steam /dev/sdb5 6f5a6eb3-a932-45aa-893e-045b57708270 ext4 /dev/sdb6 469848c8-867a-41b7-b0e1-b813a43c64af swap /dev/sdc1 725D7B961CF34B1B ntfs backup ================================ Mount points: ================================= Device Mount_Point Type Options /dev/sda5 / ext4 (rw,noatime,nodiratime,discard,errors=remount-ro) /dev/sdb5 /home ext4 (rw) =========================== sda5/boot/grub/grub.cfg: =========================== -------------------------------------------------------------------------------- # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi set default="0" if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { insmod vbe insmod vga insmod video_bochs insmod video_cirrus } insmod part_msdos insmod ext2 set root='(hd0,msdos5)' search --no-floppy --fs-uuid --set=root fd71c537-3715-44e1-b1fe-07537e22b3dd if loadfont /usr/share/grub/unicode.pf2 ; then set gfxmode=auto load_video insmod gfxterm insmod part_msdos insmod ext2 set root='(hd0,msdos5)' search --no-floppy --fs-uuid --set=root fd71c537-3715-44e1-b1fe-07537e22b3dd set locale_dir=($root)/boot/grub/locale set lang=en_GB insmod gettext fi terminal_output gfxterm if [ "${recordfail}" = 1 ]; then set timeout=-1 else set timeout=10 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray if background_color 44,0,30; then clear fi ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### function gfxmode { set gfxpayload="${1}" if [ "${1}" = "keep" ]; then set vt_handoff=vt.handoff=7 else set vt_handoff= fi } if [ "${recordfail}" != 1 ]; then if [ -e ${prefix}/gfxblacklist.txt ]; then if hwmatch ${prefix}/gfxblacklist.txt 3; then if [ ${match} = 0 ]; then set linux_gfx_mode=keep else set linux_gfx_mode=text fi else set linux_gfx_mode=text fi else set linux_gfx_mode=keep fi else set linux_gfx_mode=text fi export linux_gfx_mode if [ "${linux_gfx_mode}" != "text" ]; then load_video; fi menuentry 'Ubuntu, with Linux 3.2.0-29-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_msdos insmod ext2 set root='(hd0,msdos5)' search --no-floppy --fs-uuid --set=root fd71c537-3715-44e1-b1fe-07537e22b3dd linux /boot/vmlinuz-3.2.0-29-generic root=UUID=fd71c537-3715-44e1-b1fe-07537e22b3dd ro quiet splash $vt_handoff initrd /boot/initrd.img-3.2.0-29-generic } menuentry 'Ubuntu, with Linux 3.2.0-29-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod gzio insmod part_msdos insmod ext2 set root='(hd0,msdos5)' search --no-floppy --fs-uuid --set=root fd71c537-3715-44e1-b1fe-07537e22b3dd echo 'Loading Linux 3.2.0-29-generic ...' linux /boot/vmlinuz-3.2.0-29-generic root=UUID=fd71c537-3715-44e1-b1fe-07537e22b3dd ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.2.0-29-generic } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod part_msdos insmod ext2 set root='(hd0,msdos5)' search --no-floppy --fs-uuid --set=root fd71c537-3715-44e1-b1fe-07537e22b3dd linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod part_msdos insmod ext2 set root='(hd0,msdos5)' search --no-floppy --fs-uuid --set=root fd71c537-3715-44e1-b1fe-07537e22b3dd linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### menuentry "Windows 7 (loader) (on /dev/sda1)" --class windows --class os { insmod part_msdos insmod ntfs set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set=root A48056DF8056B80E chainloader +1 } menuentry "Windows 7 (loader) (on /dev/sda2)" --class windows --class os { insmod part_msdos insmod ntfs set root='(hd0,msdos2)' search --no-floppy --fs-uuid --set=root A8C6D6A4C6D671D4 chainloader +1 } ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### -------------------------------------------------------------------------------- =============================== sda5/etc/fstab: ================================ -------------------------------------------------------------------------------- # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda5 during installation UUID=fd71c537-3715-44e1-b1fe-07537e22b3dd / ext4 noatime,nodiratime,discard,errors=remount-ro 0 1 # /home was on /dev/sdb5 during installation UUID=6f5a6eb3-a932-45aa-893e-045b57708270 /home ext4 defaults 0 2 # swap was on /dev/sdb6 during installation UUID=469848c8-867a-41b7-b0e1-b813a43c64af none swap sw 0 0 tmpfs /tmp tmpfs defaults,noatime,mode=1777 0 0 -------------------------------------------------------------------------------- =================== sda5: Location of files loaded by Grub: ==================== GiB - GB File Fragment(s) = boot/grub/core.img 1 = boot/grub/grub.cfg 1 = boot/initrd.img-3.2.0-29-generic 2 = boot/vmlinuz-3.2.0-29-generic 1 = initrd.img 2 = vmlinuz 1 ======================== Unknown MBRs/Boot Sectors/etc: ======================== Unknown BootLoader on sda3 00000000 63 6f 70 69 61 20 65 20 63 6f 6c 61 41 63 65 64 |copia e colaAced| 00000010 65 72 20 61 20 74 6f 64 6f 20 6f 20 74 65 78 74 |er a todo o text| 00000020 6f 20 66 61 6c 61 64 6f 20 75 74 69 6c 69 7a 61 |o falado utiliza| 00000030 6e 64 6f 20 61 20 63 6f 6e 76 65 72 73 c3 a3 6f |ndo a convers..o| 00000040 20 64 65 20 74 65 78 74 6f 20 70 61 72 61 20 76 | de texto para v| 00000050 6f 7a 4d 61 6e 69 70 75 6c 61 72 20 61 73 20 64 |ozManipular as d| 00000060 65 66 69 6e 69 c3 a7 c3 b5 65 73 20 71 75 65 20 |efini....es que | 00000070 63 6f 6e 74 72 6f 6c 61 6d 20 6f 20 61 63 65 73 |controlam o aces| 00000080 73 6f 20 64 65 20 57 65 62 73 69 74 65 73 20 61 |so de Websites a| 00000090 20 63 6f 6f 6b 69 65 73 2c 20 4a 61 76 61 53 63 | cookies, JavaSc| 000000a0 72 69 70 74 20 65 20 70 6c 75 67 2d 69 6e 73 4d |ript e plug-insM| 000000b0 61 6e 69 70 75 6c 61 72 20 61 73 20 64 65 66 69 |anipular as defi| 000000c0 6e 69 c3 a7 c3 b5 65 73 20 72 65 6c 61 63 69 6f |ni....es relacio| 000000d0 6e 61 64 61 73 20 63 6f 6d 20 70 72 69 76 61 63 |nadas com privac| 000000e0 69 64 61 64 65 41 63 65 64 65 72 20 61 6f 73 20 |idadeAceder aos | 000000f0 73 65 75 73 20 70 65 72 69 66 c3 a9 72 69 63 6f |seus perif..rico| 00000100 73 20 55 53 42 55 74 69 6c 69 7a 61 72 20 6f 20 |s USBUtilizar o | 00000110 73 65 75 20 6d 69 63 72 6f 66 6f 6e 65 55 74 69 |seu microfoneUti| 00000120 6c 69 7a 61 72 20 61 20 73 75 61 20 63 c3 a2 6d |lizar a sua c..m| 00000130 61 72 61 55 74 69 6c 69 7a 61 72 20 6f 20 73 65 |araUtilizar o se| 00000140 75 20 6d 69 63 72 6f 66 6f 6e 65 20 65 20 61 20 |u microfone e a | 00000150 63 c3 a2 6d 61 72 61 4e c3 a3 6f 20 66 6f 69 20 |c..maraN..o foi | 00000160 70 6f 73 73 c3 ad 76 65 6c 20 65 6e 63 6f 6e 74 |poss..vel encont| 00000170 72 61 72 20 6f 20 63 61 6d 69 6e 68 6f 20 61 62 |rar o caminho ab| 00000180 73 6f 6c 75 74 6f 20 70 61 72 61 20 6f 20 64 69 |soluto para o di| 00000190 72 65 63 74 c3 b3 72 69 6f 20 61 20 65 6d 70 61 |rect..rio a empa| 000001a0 63 6f 74 61 72 2e 4f 20 64 69 72 65 63 74 c3 b3 |cotar.O direct..| 000001b0 72 69 6f 20 64 65 20 65 6e 74 72 61 64 61 00 fe |rio de entrada..| 000001c0 ff ff 83 fe ff ff 02 00 00 00 00 10 7a 04 00 00 |............z...| 000001d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| * 000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.| 00000200 =============================== StdErr Messages: =============================== xz: (stdin): Compressed data is corrupt xz: (stdin): Compressed data is corrupt awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in Begging / Appreciation ;) If anything else is required to solve my problem, please ask. My only hopes are that I can solve this, and that doing so won't require re-installation of Grub due to how complicated the procedures are, or that I would be needed to reinstall the OS', as I have done so about six times already since friday due to several other issues I've encountered. Thank you, and good day. System Ubuntu 12.04 64-bit / Windows 7 SP1 64-bit 64GB SSD as boot/OS drive, 1TB HDD as /Home Swap and Steam drive.

    Read the article

  • ?Oracle Database 12c????Information Lifecycle Management ILM?Storage Enhancements

    - by Liu Maclean(???)
    Oracle Database 12c????Information Lifecycle Management ILM ?????????Storage Enhancements ???????? Lifecycle Management ILM ????????? Automatic Data Placement ??????, ??ADP? ?????? 12c???????Datafile??? Online Move Datafile, ????????????????datafile???????,??????????????? ????(12.1.0.1)Automatic Data Optimization?heat map????????: ????????? (CDB)?????Automatic Data Optimization?heat map Row-level policies for ADO are not supported for Temporal Validity. Partition-level ADO and compression are supported if partitioned on the end-time columns. Row-level policies for ADO are not supported for in-database archiving. Partition-level ADO and compression are supported if partitioned on the ORA_ARCHIVE_STATE column. Custom policies (user-defined functions) for ADO are not supported if the policies default at the tablespace level. ADO does not perform checks for storage space in a target tablespace when using storage tiering. ADO is not supported on tables with object types or materialized views. ADO concurrency (the number of simultaneous policy jobs for ADO) depends on the concurrency of the Oracle scheduler. If a policy job for ADO fails more than two times, then the job is marked disabled and the job must be manually enabled later. Policies for ADO are only run in the Oracle Scheduler maintenance windows. Outside of the maintenance windows all policies are stopped. The only exceptions are those jobs for rebuilding indexes in ADO offline mode. ADO has restrictions related to moving tables and table partitions. ??????row,segment???????????ADO??,?????create table?alter table?????? ????ADO??,??????????????,???????????????? storage tier , ?????????storage tier?????????, ??????????????ADO??????????? segment?row??group? ?CREATE TABLE?ALERT TABLE???ILM???,??????????????????ADO policy? ??ILM policy???????????????? ??????? ????ADO policy, ?????alter table  ???????,?????????????? CREATE TABLE sales_ado (PROD_ID NUMBER NOT NULL, CUST_ID NUMBER NOT NULL, TIME_ID DATE NOT NULL, CHANNEL_ID NUMBER NOT NULL, PROMO_ID NUMBER NOT NULL, QUANTITY_SOLD NUMBER(10,2) NOT NULL, AMOUNT_SOLD NUMBER(10,2) NOT NULL ) ILM ADD POLICY COMPRESS FOR ARCHIVE HIGH SEGMENT AFTER 6 MONTHS OF NO ACCESS; SQL> SELECT SUBSTR(policy_name,1,24) AS POLICY_NAME, policy_type, enabled 2 FROM USER_ILMPOLICIES; POLICY_NAME POLICY_TYPE ENABLED -------------------- -------------------------- -------------- P41 DATA MOVEMENT YES ALTER TABLE sales MODIFY PARTITION sales_1995 ILM ADD POLICY COMPRESS FOR ARCHIVE HIGH SEGMENT AFTER 6 MONTHS OF NO ACCESS; SELECT SUBSTR(policy_name,1,24) AS POLICY_NAME, policy_type, enabled FROM USER_ILMPOLICIES; POLICY_NAME POLICY_TYPE ENABLE ------------------------ ------------- ------ P1 DATA MOVEMENT YES P2 DATA MOVEMENT YES /* You can disable an ADO policy with the following */ ALTER TABLE sales_ado ILM DISABLE POLICY P1; /* You can delete an ADO policy with the following */ ALTER TABLE sales_ado ILM DELETE POLICY P1; /* You can disable all ADO policies with the following */ ALTER TABLE sales_ado ILM DISABLE_ALL; /* You can delete all ADO policies with the following */ ALTER TABLE sales_ado ILM DELETE_ALL; /* You can disable an ADO policy in a partition with the following */ ALTER TABLE sales MODIFY PARTITION sales_1995 ILM DISABLE POLICY P2; /* You can delete an ADO policy in a partition with the following */ ALTER TABLE sales MODIFY PARTITION sales_1995 ILM DELETE POLICY P2; ILM ???????: ?????ILM ADP????,???????: ?????? ???? activity tracking, ????2????????,???????????????????: SEGMENT-LEVEL???????????????????? ROW-LEVEL????????,??????? ????????: 1??????? SEGMENT-LEVEL activity tracking ALTER TABLE interval_sales ILM  ENABLE ACTIVITY TRACKING SEGMENT ACCESS ???????INTERVAL_SALES??segment level  activity tracking,?????????????????? 2? ??????????? ALTER TABLE emp ILM ENABLE ACTIVITY TRACKING (CREATE TIME , WRITE TIME); 3????????? ALTER TABLE emp ILM ENABLE ACTIVITY TRACKING  (READ TIME); ?12.1.0.1.0?????? ??HEAT_MAP??????????, ?????system??session?????heap_map????????????? ?????????HEAT MAP??,? ALTER SYSTEM SET HEAT_MAP = ON; ?HEAT MAP??????,??????????????????????????  ??SYSTEM?SYSAUX????????????? ???????HEAT MAP??: ALTER SYSTEM SET HEAT_MAP = OFF; ????? HEAT_MAP????, ?HEAT_MAP??? ?????????????????????? ?HEAT_MAP?????????Automatic Data Optimization (ADO)??? ??ADO??,Heat Map ?????????? ????V$HEAT_MAP_SEGMENT ??????? HEAT MAP?? SQL> select * from V$heat_map_segment; no rows selected SQL> alter session set heat_map=on; Session altered. SQL> select * from scott.emp; EMPNO ENAME JOB MGR HIREDATE SAL COMM DEPTNO ---------- ---------- --------- ---------- --------- ---------- ---------- ---------- 7369 SMITH CLERK 7902 17-DEC-80 800 20 7499 ALLEN SALESMAN 7698 20-FEB-81 1600 300 30 7521 WARD SALESMAN 7698 22-FEB-81 1250 500 30 7566 JONES MANAGER 7839 02-APR-81 2975 20 7654 MARTIN SALESMAN 7698 28-SEP-81 1250 1400 30 7698 BLAKE MANAGER 7839 01-MAY-81 2850 30 7782 CLARK MANAGER 7839 09-JUN-81 2450 10 7788 SCOTT ANALYST 7566 19-APR-87 3000 20 7839 KING PRESIDENT 17-NOV-81 5000 10 7844 TURNER SALESMAN 7698 08-SEP-81 1500 0 30 7876 ADAMS CLERK 7788 23-MAY-87 1100 20 7900 JAMES CLERK 7698 03-DEC-81 950 30 7902 FORD ANALYST 7566 03-DEC-81 3000 20 7934 MILLER CLERK 7782 23-JAN-82 1300 10 14 rows selected. SQL> select * from v$heat_map_segment; OBJECT_NAME SUBOBJECT_NAME OBJ# DATAOBJ# TRACK_TIM SEG SEG FUL LOO CON_ID -------------------- -------------------- ---------- ---------- --------- --- --- --- --- ---------- EMP 92997 92997 23-JUL-13 NO NO YES NO 0 ??v$heat_map_segment???,?v$heat_map_segment??????????????X$HEATMAPSEGMENT V$HEAT_MAP_SEGMENT displays real-time segment access information. Column Datatype Description OBJECT_NAME VARCHAR2(128) Name of the object SUBOBJECT_NAME VARCHAR2(128) Name of the subobject OBJ# NUMBER Object number DATAOBJ# NUMBER Data object number TRACK_TIME DATE Timestamp of current activity tracking SEGMENT_WRITE VARCHAR2(3) Indicates whether the segment has write access: (YES or NO) SEGMENT_READ VARCHAR2(3) Indicates whether the segment has read access: (YES or NO) FULL_SCAN VARCHAR2(3) Indicates whether the segment has full table scan: (YES or NO) LOOKUP_SCAN VARCHAR2(3) Indicates whether the segment has lookup scan: (YES or NO) CON_ID NUMBER The ID of the container to which the data pertains. Possible values include:   0: This value is used for rows containing data that pertain to the entire CDB. This value is also used for rows in non-CDBs. 1: This value is used for rows containing data that pertain to only the root n: Where n is the applicable container ID for the rows containing data The Heat Map feature is not supported in CDBs in Oracle Database 12c, so the value in this column can be ignored. ??HEAP MAP??????????????????,????DBA_HEAT_MAP_SEGMENT???????? ???????HEAT_MAP_STAT$?????? ??Automatic Data Optimization??????: ????1: SQL> alter system set heat_map=on; ?????? ????????????? scott?? http://www.askmaclean.com/archives/scott-schema-script.html SQL> grant all on dbms_lock to scott; ????? SQL> grant dba to scott; ????? @ilm_setup_basic C:\APP\XIANGBLI\ORADATA\MACLEAN\ilm.dbf @tktgilm_demo_env_setup SQL> connect scott/tiger ; ???? SQL> select count(*) from scott.employee; COUNT(*) ---------- 3072 ??? 1 ?? SQL> set serveroutput on SQL> exec print_compression_stats('SCOTT','EMPLOYEE'); Compression Stats ------------------ Uncmpressed : 3072 Adv/basic compressed : 0 Others : 0 PL/SQL ???????? ???????3072?????? ????????? ????policy ???????????? alter table employee ilm add policy row store compress advanced row after 3 days of no modification / SQL> set serveroutput on SQL> execute list_ilm_policies; -------------------------------------------------- Policies defined for SCOTT -------------------------------------------------- Object Name------ : EMPLOYEE Subobject Name--- : Object Type------ : TABLE Inherited from--- : POLICY NOT INHERITED Policy Name------ : P1 Action Type------ : COMPRESSION Scope------------ : ROW Compression level : ADVANCED Tier Tablespace-- : Condition type--- : LAST MODIFICATION TIME Condition days--- : 3 Enabled---------- : YES -------------------------------------------------- PL/SQL ???????? SQL> select sysdate from dual; SYSDATE -------------- 29-7? -13 SQL> execute set_back_chktime(get_policy_name('EMPLOYEE',null,'COMPRESSION','ROW','ADVANCED',3,null,null),'EMPLOYEE',null,6); Object check time reset ... -------------------------------------- Object Name : EMPLOYEE Object Number : 93123 D.Object Numbr : 93123 Policy Number : 1 Object chktime : 23-7? -13 08.13.42.000000 ?? Distnt chktime : 0 -------------------------------------- PL/SQL ???????? ?policy?chktime???6??, ????set_back_chktime???????????????“????”?,?????????,???????? ?????? alter system flush buffer_cache; alter system flush buffer_cache; alter system flush shared_pool; alter system flush shared_pool; SQL> execute set_window('MONDAY_WINDOW','OPEN'); Set Maint. Window OPEN ----------------------------- Window Name : MONDAY_WINDOW Enabled? : TRUE Active? : TRUE ----------------------------- PL/SQL ???????? SQL> exec dbms_lock.sleep(60) ; PL/SQL ???????? SQL> exec print_compression_stats('SCOTT', 'EMPLOYEE'); Compression Stats ------------------ Uncmpressed : 338 Adv/basic compressed : 2734 Others : 0 PL/SQL ???????? ??????????????? Adv/basic compressed : 2734 ??????? SQL> col object_name for a20 SQL> select object_id,object_name from dba_objects where object_name='EMPLOYEE'; OBJECT_ID OBJECT_NAME ---------- -------------------- 93123 EMPLOYEE SQL> execute list_ilm_policy_executions ; -------------------------------------------------- Policies execution details for SCOTT -------------------------------------------------- Policy Name------ : P22 Job Name--------- : ILMJOB48 Start time------- : 29-7? -13 08.37.45.061000 ?? End time--------- : 29-7? -13 08.37.48.629000 ?? ----------------- Object Name------ : EMPLOYEE Sub_obj Name----- : Obj Type--------- : TABLE ----------------- Exec-state------- : SELECTED FOR EXECUTION Job state-------- : COMPLETED SUCCESSFULLY Exec comments---- : Results comments- : --- -------------------------------------------------- PL/SQL ???????? ILMJOB48?????policy?JOB,?12.1.0.1??J00x???? ?MMON_SLAVE???M00x???15????????? select sample_time,program,module,action from v$active_session_history where action ='KDILM background EXEcution' order by sample_time; 29-7? -13 08.16.38.369000000 ?? ORACLE.EXE (M000) MMON_SLAVE KDILM background EXEcution 29-7? -13 08.17.38.388000000 ?? ORACLE.EXE (M000) MMON_SLAVE KDILM background EXEcution 29-7? -13 08.17.39.390000000 ?? ORACLE.EXE (M000) MMON_SLAVE KDILM background EXEcution 29-7? -13 08.23.38.681000000 ?? ORACLE.EXE (M002) MMON_SLAVE KDILM background EXEcution 29-7? -13 08.32.38.968000000 ?? ORACLE.EXE (M000) MMON_SLAVE KDILM background EXEcution 29-7? -13 08.33.39.993000000 ?? ORACLE.EXE (M003) MMON_SLAVE KDILM background EXEcution 29-7? -13 08.33.40.993000000 ?? ORACLE.EXE (M003) MMON_SLAVE KDILM background EXEcution 29-7? -13 08.36.40.066000000 ?? ORACLE.EXE (M000) MMON_SLAVE KDILM background EXEcution 29-7? -13 08.37.42.258000000 ?? ORACLE.EXE (M000) MMON_SLAVE KDILM background EXEcution 29-7? -13 08.37.43.258000000 ?? ORACLE.EXE (M000) MMON_SLAVE KDILM background EXEcution 29-7? -13 08.37.44.258000000 ?? ORACLE.EXE (M000) MMON_SLAVE KDILM background EXEcution 29-7? -13 08.38.42.386000000 ?? ORACLE.EXE (M001) MMON_SLAVE KDILM background EXEcution select distinct action from v$active_session_history where action like 'KDILM%' KDILM background CLeaNup KDILM background EXEcution SQL> execute set_window('MONDAY_WINDOW','CLOSE'); Set Maint. Window CLOSE ----------------------------- Window Name : MONDAY_WINDOW Enabled? : TRUE Active? : FALSE ----------------------------- PL/SQL ???????? SQL> drop table employee purge ; ????? ???? ????? spool ilm_usecase_1_cleanup.lst @ilm_demo_cleanup ; spool off

    Read the article

  • Need help with testdisk output

    - by dan
    I had (note the past tense) an ubuntu 12.04 system with separate partitions for the base and /home directories. It started acting wonky, so I decided to do a reinstall with 12.10, intending just to do a reinstall to the base partition. After several seconds, I realize that the installer was repartitioning the drive and reinstalling, so I pulled the power cord. I'm now trying to recover as much as I can with testdisk, but it seems that testdisk is finding 100 unique partitions when I run it - they mostly tend to be HFS+ or solaris /home (which I think is just an ext4; I've never had solaris on the machine). I've pasted an abbreviated version of the testdisk output below (first ~100 lines, and then ~100 lines from the middle of the output). Is there a way to combine or recreate the partitions and then data recovery, or some other way maximize what I can recover (ideally as much of the file system as possible)? I really only care about what was in the /home directory - I'd rather not use photorec since I don't have another 2 TB HD lying around to recover to. Thanks, Dan Mon Dec 10 06:03:00 2012 Command line: TestDisk TestDisk 6.13, Data Recovery Utility, November 2011 Christophe GRENIER <[email protected]> http://www.cgsecurity.org OS: Linux, kernel 3.2.34-std312-amd64 (#2 SMP Sat Nov 17 08:06:32 UTC 2012) x86_64 Compiler: GCC 4.4 Compilation date: 2012-11-27T22:44:52 ext2fs lib: 1.42.6, ntfs lib: libntfs-3g, reiserfs lib: 0.3.1-rc8, ewf lib: none /dev/sda: LBA, HPA, LBA48, DCO support /dev/sda: size 3907029168 sectors /dev/sda: user_max 3907029168 sectors /dev/sda: native_max 3907029168 sectors Warning: can't get size for Disk /dev/mapper/control - 0 B - CHS 1 1 1, sector size=512 /dev/sr0 is not an ATA disk Hard disk list Disk /dev/sda - 2000 GB / 1863 GiB - CHS 243201 255 63, sector size=512 - WDC WD20EARS-00J2GB0, S/N:WD-WCAYY0075071, FW:80.00A80 Disk /dev/sdb - 1013 MB / 967 MiB - CHS 1014 32 61, sector size=512 - Generic Flash Disk, FW:8.07 Disk /dev/sr0 - 367 MB / 350 MiB - CHS 179470 1 1 (RO), sector size=2048 - PLDS DVD+/-RW DH-16AAS, FW:JD12 Partition table type (auto): Intel Disk /dev/sda - 2000 GB / 1863 GiB - WDC WD20EARS-00J2GB0 Partition table type: EFI GPT Analyse Disk /dev/sda - 2000 GB / 1863 GiB - CHS 243201 255 63 Current partition structure: Bad GPT partition, invalid signature. search_part() Disk /dev/sda - 2000 GB / 1863 GiB - CHS 243201 255 63 recover_EXT2: s_block_group_nr=0/14880, s_mnt_count=5/4294967295, s_blocks_per_group=32768, s_inodes_per_group=8192 recover_EXT2: s_blocksize=4096 recover_EXT2: s_blocks_count 487593984 recover_EXT2: part_size 3900751872 MS Data 2048 3900753919 3900751872 EXT4 Large file Sparse superblock, 1997 GB / 1860 GiB Linux Swap 3900755968 3907028975 6273008 SWAP2 version 1, 3211 MB / 3062 MiB Results P MS Data 2048 3900753919 3900751872 EXT4 Large file Sparse superblock, 1997 GB / 1860 GiB P Linux Swap 3900755968 3907028975 6273008 SWAP2 version 1, 3211 MB / 3062 MiB interface_write() 1 P MS Data 2048 3900753919 3900751872 2 P Linux Swap 3900755968 3907028975 6273008 search_part() Disk /dev/sda - 2000 GB / 1863 GiB - CHS 243201 255 63 recover_EXT2: s_block_group_nr=0/14880, s_mnt_count=5/4294967295, s_blocks_per_group=32768, s_inodes_per_group=8192 recover_EXT2: s_blocksize=4096 recover_EXT2: s_blocks_count 487593984 recover_EXT2: part_size 3900751872 MS Data 2048 3900753919 3900751872 EXT4 Large file Sparse superblock, 1997 GB / 1860 GiB block_group_nr 1 recover_EXT2: "e2fsck -b 32768 -B 4096 device" may be needed recover_EXT2: s_block_group_nr=1/14880, s_mnt_count=0/4294967295, s_blocks_per_group=32768, s_inodes_per_group=8192 recover_EXT2: s_blocksize=4096 recover_EXT2: s_blocks_count 487593984 recover_EXT2: part_size 3900751872 MS Data 2046 3900753917 3900751872 EXT4 Large file Sparse superblock Backup superblock, 1997 GB / 1860 GiB block_group_nr 1 recover_EXT2: "e2fsck -b 32768 -B 4096 device" may be needed recover_EXT2: s_block_group_nr=1/14880, s_mnt_count=0/4294967295, s_blocks_per_group=32768, s_inodes_per_group=8192 recover_EXT2: s_blocksize=4096 recover_EXT2: s_blocks_count 487593984 recover_EXT2: part_size 3900751872 MS Data 2048 3900753919 3900751872 EXT4 Large file Sparse superblock Backup superblock, 1997 GB / 1860 GiB block_group_nr 1 recover_EXT2: "e2fsck -b 32768 -B 4096 device" may be needed recover_EXT2: s_block_group_nr=1/14584, s_mnt_count=0/27, s_blocks_per_group=32768, s_inodes_per_group=8192 recover_EXT2: s_blocksize=4096 recover_EXT2: s_blocks_count 477915164 recover_EXT2: part_size 3823321312 MS Data 4094 3823325405 3823321312 EXT4 Large file Sparse superblock Backup superblock, 1957 GB / 1823 GiB block_group_nr 1 ....snip...... MS Data 2046 3900753917 3900751872 EXT4 Large file Sparse superblock Backup superblock, 1997 GB / 1860 GiB MS Data 2048 3900753919 3900751872 EXT4 Large file Sparse superblock, 1997 GB / 1860 GiB MS Data 4094 3823325405 3823321312 EXT4 Large file Sparse superblock Backup superblock, 1957 GB / 1823 GiB MS Data 4096 3823325407 3823321312 EXT4 Large file Sparse superblock Backup superblock, 1957 GB / 1823 GiB MS Data 7028840 7033383 4544 FAT12, 2326 KB / 2272 KiB Mac HFS 67856948 67862179 5232 HFS+ found using backup sector!, 2678 KB / 2616 KiB Mac HFS 67862176 67867407 5232 HFS+, 2678 KB / 2616 KiB Mac HFS 67862244 67867475 5232 HFS+ found using backup sector!, 2678 KB / 2616 KiB Mac HFS 67867404 67872635 5232 HFS+, 2678 KB / 2616 KiB Mac HFS 67867472 67872703 5232 HFS+, 2678 KB / 2616 KiB Mac HFS 67872700 67877931 5232 HFS+, 2678 KB / 2616 KiB Mac HFS 67937834 67948067 10234 [EasyInstall_OSX] HFS found using backup sector!, 5239 KB / 5117 KiB Mac HFS 67938012 67948155 10144 HFS+ found using backup sector!, 5193 KB / 5072 KiB Mac HFS 67948064 67958297 10234 [EasyInstall_OSX] HFS, 5239 KB / 5117 KiB Mac HFS 67948070 67958303 10234 [EasyInstall_OSX] HFS found using backup sector!, 5239 KB / 5117 KiB Mac HFS 67948152 67958295 10144 HFS+, 5193 KB / 5072 KiB Mac HFS 67958292 67968435 10144 HFS+, 5193 KB / 5072 KiB Mac HFS 67958300 67968533 10234 [EasyInstall_OSX] HFS, 5239 KB / 5117 KiB Mac HFS 67992596 67997827 5232 HFS+ found using backup sector!, 2678 KB / 2616 KiB Mac HFS 67997824 68003055 5232 HFS+, 2678 KB / 2616 KiB Mac HFS 67997892 68003123 5232 HFS+ found using backup sector!, 2678 KB / 2616 KiB Mac HFS 68003052 68008283 5232 HFS+, 2678 KB / 2616 KiB Mac HFS 68003120 68008351 5232 HFS+, 2678 KB / 2616 KiB Mac HFS 68008348 68013579 5232 HFS+, 2678 KB / 2616 KiB Solaris /home 84429840 123499141 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84429952 123499253 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84493136 123562437 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84493248 123562549 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84566088 123635389 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84566200 123635501 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84571232 123640533 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84571344 123640645 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84659952 123729253 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84660064 123729365 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84690504 123759805 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84690616 123759917 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84700424 123769725 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84700536 123769837 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84797720 123867021 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84797832 123867133 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84812544 123881845 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84812656 123881957 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84824552 123893853 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84824664 123893965 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84847528 123916829 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84847640 123916941 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84886840 123956141 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84886952 123956253 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84945488 124014789 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84945600 124014901 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84957992 124027293 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84958104 124027405 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84962240 124031541 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84962352 124031653 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84977168 124046469 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84977280 124046581 39069302 UFS1, 20 GB / 18 GiB MS Data 174395467 178483851 4088385 ..... snip (it keeps going on for quite a while)

    Read the article

  • How to use BCDEdit to dual boot Windows installations?

    - by Ian Boyd
    What are the bcdedit commands necessary to setup dual boot between different installations of Windows?5 Background i recently installed Windows 8 onto a separate hard drive1. Now that Windows 8 in installed i want to dual-boot back to Windows 7. i have my two2 hard drives: So you can see that i have my two disks, with the partitions containing Windows: Windows 7: \\PhysicalDisk0 (partition 03) Windows 8: \\PhysicalDisk2 (partition 1) What i'm trying to figure out how is how to use bcdedit to instruct the thing that boots Windows that there is another Windows installation out there. Running bcdedit now, it shows current configuration: C:\WINDOWS\system32>bcdedit Windows Boot Manager -------------------- identifier {bootmgr} device partition=\Device\HarddiskVolume2 description Windows Boot Manager locale en-US inherit {globalsettings} integrityservices Enable default {current} resumeobject {ce153eb7-3786-11e2-87c0-e740e123299f} displayorder {current} toolsdisplayorder {memdiag} timeout 30 Windows Boot Loader ------------------- identifier {current} device partition=C: path \WINDOWS\system32\winload.exe description Windows 8 locale en-US inherit {bootloadersettings} recoverysequence {ce153eb9-3786-11e2-87c0-e740e123299f} integrityservices Enable recoveryenabled Yes allowedinmemorysettings 0x15000075 osdevice partition=C: systemroot \WINDOWS resumeobject {ce153eb7-3786-11e2-87c0-e740e123299f} nx OptIn bootmenupolicy Standard hypervisorlaunchtype Auto i cannot find any documentation on the difference between Windows Boot Manager and Windows Boot Loader. Documentation There is some documentation on Bcdedit: Technet: Command Line Reference - Bcdedit Technet: Windows Automated Installation Kit - BCDEdit Command Line Options Whitepaper - BCDEdit Commands for Boot Environment (Word Document) But they don't explain how edit the binary boot configuration data If i had to guess, i would think that a Windows Boot Manager instructs the BIOS what program it should run. That program would give the user a set of boot choices. That leaves Windows Boot Loader do be a particular boot choice, that represents a particular installation of Windows. If that is the case i would need to create a new Windows Boot Loader entry. This means i might want to use the /create parameter: /create Creates a new boot entry: bcdedit [/store filename] /create [id] /d description [/application apptype | /inherit [apptype] | /inherit DEVICE | /device] So i assume a syntax of: >bcdedit /create /d "The old Windows 7" /application osloader Where application can be one of the following types: Apptype Description BOOTSECTOR The boot sector application OSLOADER The Windows boot loader RESUME A resume application Unfortunately, the only documentation about osloader is "The Windows boot loader". i don't see how that can differentiate between Windows 8 on one hard drive, and Windows 7 on another. The other possible parameter when /create a boot loader is >bcdedit /create /D "Windows Vista" /device "The Quick Brown Fox" Unfortunately the documentation is missing for /device: /device Optional. If id is not set to a well-known identifier, the option that is used to specify the new boot entry as an additional device options entry. Since i did not set id to a well-known identifier, i must set /device to "the option that is used to specify the new boot entry as an additional device options entry". i know all those words; they're all English. But i have on idea what it is saying; those words in that order seem nonsensical. So i'm somewhat stymied. i don't want to be like Dan Stolts from Microsoft: I found no content that was particularly helpful when I hosed my machine by playing with BCDEdit. This post would have been ok if there was much more detail especially on the /set command OSDevice, etc. So once I got my machine fixed, I documented the solution and the information is here.... i mean, if a Microsoft guy can't even figure out how to use BCDEdit to edit his BCD, then what chance to i have? Bonus Reading BCDEdit Command-Line Options Bcdedit Server 2008 R2 or Windows 7 System Will NOT Boot After Making Changes To Boot Manager Using BCDEdit Visual BCD Editor4 Windows 7 and Windows 8 RTM Dual Boot Setup Footnotes 1 Since the Windows 8 installer would have damaged my Windows 7 install, i decided to unplug my "main" hard drive during the install. Which is a long-winded explanation of why the Windows 8 installer didn't detect the existing Windows 7 install. Normally the installer would have automatically created the required entries for dual-boot. Not that the reason i'm asking the question is important. 2 Really there's three drives, but the third is just bulk storage. The existence of a 3rd hard drive is irrelevant to the question. i only mention it in case someone wants to know why the screenshot has 3 hard drives when i only mention two. 3 i arbitrarily started numbering partitions at "zero"; not to imply that partitions are numbered starting at zero. i only mention partitions because i don't see how any boot-loader could do its job without knowing which partition, and which folder, an installation of Windows is located in. 4 i'm asking about BCDEdit. i tried Visual BCD Editor. It seems to be a visual BCD editor. That is to say that it's a GUI, but still uses the same terminology as BCDEdit, and requires the same knowledge that BCD doesn't document. 5 For simplicity sake we'll assume that all installation of Windows i want to dual-boot between are Windows Vista or later, making them all compatible with the BCDEdit and the binary boot loader. The alternative would require delving into the intricacies of the old ntloader. Nor am i asking about dual booting to Linux; or how to boot to a Virtual Hard Drive (vhd) image. Just modern versions of Windows on existing hard drives in the same machine. Note: You can ignore everything after the word Background. It's all pointless exposition to satisfy some people's need for "research effort" before they'll consider being helpful. Some people have even been known to summarily close questions unless there is research effort. Some people have been know to close questions if there is too much research effort. Some people close questions when i put the note saying that they can ignore everything after the Background out of spite. Some people are just grumpy.

    Read the article

  • Hard disk with bad clusters

    - by Dan
    I have been trying to backup some files up to DVD recently, and the burn process failed saying the CRC check failed for certain files. I then tried to browse to these files in Windows explorer and my whole machine locks up and I have to reboot. I ran check disk without the '/F /R' arguments and it told me I had bad sectors. So I re-ran it with the arguments and check disk fails during the 'Chkdsk is verifying usn journal' stage with this error: Insufficient disk space to fix the usn journal $j data stream The hard disk is a 300GB Partition on a 400GB Disk, and there is 160GBs of free space on the partition. My os (Windows 7) is installed on the other partition and is running fine. Any idea how I fix this? or repair it enough to copy my files off it?

    Read the article

  • Growing the size of a VM's disk in VMware

    - by soandos
    I have a VM that I originally gave 10 GB to (using VMware workstation, and Ubuntu 11.10 is the guest OS). I now wish to add to that. I have seen the option to expand the disk size, but all that does is create a new "partition" that Ubuntu can see. Is there a way to expand the size of the primary partition that the guest OS is using? NOTE: I have seen something regarding doing this for a regular Ubunbu OS that requires a boot disk. Is there a way that I can apply that to this VM case? Using Windows 7 64-bit as the host OS EDIT: To be clear, I am trying to resize the boot partition. Edit 2: GParted's resize option is greyed out.

    Read the article

  • Recovering with DDRescue Cannot Complete (write error: Read-only file system)

    - by c00lryguy
    I'm trying to recover a corrupt VDI using vdfuse to mount the VDI and using dd_rescue to rescue the borked partition. dd_rescue seems to be working fine but once it reached about half of the partition, it just STOPs and gives the following error: ddrescue: write error: Read-only file system Wait.. what? It suddenly turns the FS it is writing the recovered partition to into a read-only file system. Well... why? Will I never be able to finish this? What's going on?

    Read the article

  • Installing Fedora 11 fIlesystem from ISO in to a VM image

    - by okhalid
    Hi, I need to install Fedora 11 in my monitor-less linux box which is running some where in a data center. I will use Fedora 11 as a virtual machine. What I already know/have: 1) How to create LVM partitions and create ext3 filesystem 2) Mount the LVM partition and ISO image 3) Run the partition with Xen as a virtual machine What I need: 1) I need to install Fedora ll file system into an lvm partition (let's say /dev/fedora11) from an ISO image so that I have all the directories /root, /bin, /sys etc etc under /dev/fedora11 Any help would be much appreciated! NOTE: I don't have a monitor for this server, so I need to do it via SSH

    Read the article

  • multi boot: xp + xp + xubuntu, how to?

    - by Jassano
    My laptop (with a single harddrive) currently has xp + xubuntu dual boot. I want to make that triple boot: xp + xp + xubuntu Please don't ask why, take it as given. How can I accomplish this triple boot? I tried using gparted to add a partition (worked!), used dd to clone the xp install to the new partition (worked!), edited grub (my bootloader) to list a third entry pointing to the correct device (worked!). But regardless of which of the two xp entries in grub I select I still get booted into one and the same XP. The files for the other XP show up under D: so I know they're there alright. I have edited the boot.ini on the new partition so everything looks to be in order. What do I need to do to change that and make both xp instances bootable in this scenario?

    Read the article

  • How to install Mac OS X from Windows without a CD

    - by John Smith
    I have two partitions, one for windows the other for Mac OS X. Recently, my Mac OS X crashed and my partition rendered unbootable. When I insert Mac OS X's installation CD everything seems normal from startup, to choosing whether to boot from Windows or CD, until the CD boots. The screen flickers and it becomes extremely dark can barely see anything but I can see that it is booted correctly. I tried increasing brightness but that did not work. After hours of trying to read what is on the screen and guessing where to click the installation did not go through... It took more than a couple of hours so I restarted. Now the partition is accessible through Windows but is not bootable. TL;DR Is it possible to install Mac OS X on a visible partition without the CD through Windows XP?... Thanks

    Read the article

  • 1Tb disk formatted on Linux won't mount on windows nor mac

    - by Pedro MC
    I have an external HD (western digital) with 1Tb. I use Linux but I wanted to reserve a cross platform partition on the disk. I decided to create two partitions and used the "disks" application to do it. I created one partition with the LUKS (version 1) encryption and the other one, cross platform, in NTFS filesystem. Things work fine on my OS but when I try to use the disk (the cross platform partition) on both windows and mac the device is not recognized. What could it be? Next, output of "sfdisk -l /dev/sdb": Disk /dev/sdb: 121600 cylinders, 255 heads, 63 sectors/track Units = cylinders of 8225280 bytes, blocks of 1024 bytes, counting from 0 Device Boot Start End #cyls #blocks Id System /dev/sdb1 0+ 36473- 36473- 292968750 83 Linux /dev/sdb2 36473+ 121600- 85128- 683789062+ 83 Linux /dev/sdb3 0 - 0 0 0 Empty /dev/sdb4 0 - 0 0 0 Empty

    Read the article

  • Cannot boot from USB on my Mac mini

    - by Thai Tran
    Two weeks ago I installed OSX 10.8 on my Mac mini. After that, my system started to hang a lot, so I tried to erase it and install OSX 10.7 again. I used carbon Copy Cloner to make the bootable USB and it can load successfully on another Macbook. However, on my Mac mini, when I press on the option button to select the USB, it loads the white screen with a ban symbol at the center of the screen. After a moment, my machine automatically shuts down. Does anyone know how to solve this problem? Edit: this is exactly the problem I have now http://forums.macrumors.com/archive/index.php/t-1207168.html Update 1: the hdd seems ok (from disk utility). I restored the booting partition by disk utility (drag the dmg file to that partition). After restarting and using that partition to boot, prohibited symbol is still there

    Read the article

  • running chkdsk on a disk without a drive letter

    - by neubert
    I have a hard drive that shows up in Disk Management as having two partitions. One of the partitions says 69.71GB and that's it. The other says 4.82GB and, underneath that, Healthy (OEM Partition). I'm trying to do chkdsk on the 69.71GB partition and am unsure of how to do it without a drive letter. Any ideas? It's an NTFS partition that's gotten corrupted. Linux's ntfsfix spits out a bunch of errors so I'm thinking chkdsk might be better. Thanks

    Read the article

  • Can i enlarge os c drive of my windows 8?

    - by Sorgatz
    Last year I got a new Western Digital WD Blue 500GB HDD to replace my old drive. The first thing I did was to install latest Windows 8. While installing Windows 8 I created 3 partitions, C drive for the OS and others for storage. The OS partition is 120GB (which at the time I thought would be plenty big) but I'm now realizing its too small! I wonder if it's possible to re-size HDD partition without reformatting and re-install my Windows 8. So that is my question, Can i enlarge os c drive of my windows 8 without having to re-format? I've used the Norton Partition Magic and Disk Management to make this happen but there doesn't seem to be any options to make it happen. Thanks for any help you guys can give regarding my question. I've worked hard to optimize my current install of Windows 8 and would hate to start all over again.

    Read the article

  • maildir in Windows for IMAP

    - by User1
    I'm interested in accessing my IMAP accounts offline. I found that maildirs are a simple way to make it work. I found that [offlineimap] takes care of almost everything in making the IMAP-maildir sync happen. Then, I can open the account in Mutt or Wanderlust client. One major problem, maildirs use colons in their filenames. Windows doesn't allow colons. I tried mount -f -s -b -o managed "d:/tmp/mail" "/home/of/mail" in Cygwin, but doing an echo test > /home/of/mail/test:file didn't work I'm thinking about ext2fs, but I need an ext2 partition somewhere. Can I make a file into a partition somehow? I don't want to start modifying my hard drive's partition table. Besides, does anyone know if ext2fs will support colons in filenames?

    Read the article

  • OS X 10.6 Snow Leopard no longer mounting an external USB drive

    - by Brant Bobby
    I have a 1TB generic external hard drive containing a single HFS partition. I originally formatted this using Disk Utility and it worked fine. Now, for some reason, it's not auto-mounting when I start up. Using mount at the command line gives the following error: $ sudo mount /dev/disk1s2 /Volumes/Test /dev/disk1s2 on /Volumes/Test: Incorrect super block. ... but if I use the mount_hfs command it works fine, mounts, and is readable. $ mount_hfs /dev/disk1s2 /Volumes/Test/ fsck gives me an error about a bad super block: $ fsck /dev/disk1 ** /dev/rdisk1 (NO WRITE) BAD SUPER BLOCK: MAGIC NUMBER WRONG ... but fsck_hfs -fn /dev/disk1s2 doesn't find any problems and reports that the volume appears to be OK. In Disk Utility, the drive appears to have a single MS-DOS partition with a curious notice about how it appears to be partitioned for Boot Camp: I have the Boot Camp HFS driver installed in WIndows 7, and that OS sees the drive/partition normally. What's wrong with my disk?

    Read the article

  • Is it possible to fake a Windows install for grub to add to boot menu?

    - by Mussnoon
    When doing a fresh install of a Linux distro (Ubuntu, for instance) on a fresh hard drive, if I want to install Linux first, and Windows later, is it possible to make grub think there's a Windows install on the first partition so that it'll be added to the boot menu after the installation is complete? To illustrate, I have a new hard drive and have created two primary partitions (both still raw) and two logical (Ext4 and Swap). I want to install Ubuntu on the Ext4 partition first, and some version of Windows on the first primary partition only after that (because I currently don't have a Windows install disk, but do have one for Ubuntu). Is it possible to make Ubuntu add an entry for Windows right now and avoid having to repair grub after I've installed Windows?

    Read the article

  • Program complains not enough disk space even if the disk space exists

    - by user1189899
    I have an EXT3 partition mounted in ordered data mode. If a power failure occurs when a program is creating files on that partition, I see that space usage reported is normal and I don't see any partial written files. But when I try to run the same program again after the system comes back up it complains that there is not enough disk space. Even though the free space reported is far more than required. The program always succeeds in normal conditions. Also the problem seems to disappear when the partition is remounted. I was wondering what could be the right way to handle the situation other than unmounting and remounting.

    Read the article

  • Test disk recovery

    - by AIB
    I had a 250GB hard disk having several NTFS partitions. The disk was a dynamic disk (created in windows). Now when I formatted windows (which was in another disk), the dynamic disk is shown as offline. I tried using the testdisk tool to recover the data and created a partial backup. Testdisk is able to list all partitions in the disk. All partitions are shown as type 'D' (Deleted). I want to change the 'D' to 'P' (Primary), 'L'(Logical), 'E' (Extended) appropriately and build a new partition table. If I can write the partition table to disk, the disk will be of 'basic' type and should be readable in all OS. What should be the appropriate partition types? I checked the files on the partitions and no OS was ound. So none of the partitions were bootable. Will randomly selecting P,L,E hurt the data in anyway?

    Read the article

  • Can i enlarge os c drive of my windows 8? [migrated]

    - by Sorgatz
    Last year I got a new Western Digital WD Blue 500GB HDD to replace my old drive. The first thing I did was to install latest Windows 8. While installing Windows 8 I created 3 partitions, C drive for the OS and others for storage. The OS partition is 120GB (which at the time I thought would be plenty big) but I'm now realizing its too small! I wonder if it's possible to re-size HDD partition without reformatting and re-install my Windows 8. So that is my question, Can i enlarge os c drive of my windows 8 without having to re-format? I've used the Norton Partition Magic and Disk Management to make this happen but there doesn't seem to be any options to make it happen. Thanks for any help you guys can give regarding my question. I've worked hard to optimize my current install of Windows 8 and would hate to start all over again.

    Read the article

  • Refresh devices - reconnect CF card drive by script (unplug-plug equivalent)

    - by Chris
    Hello I plug a completely clean CF-card into my USB card-writer. Then I dd a mbr block of 512 bytes size to the device, which contains the partition table and the definition of one partition. Problem: While "fdisk -l /dev/sdx" correctly displays the partition, it happens that there is no device like "/dev/sdx1" after these operations (as it was not present before). Unplugging and plugging the card-writer solves the problem and makes the device(s) appear. Since I use this procedure in a script, manually unplugging and re-plugging is no option whatsoever. Is there a way to "refresh" the devices or to "unplug and re-plug" the drive by script such that /dev/sdx1 appears? Thanks for any help, Chris

    Read the article

  • Unable to access intel fake RAID 1 array in Fedora 14 after reboot

    - by Sim
    Hello everyone, 1st I am relatively new to linux (but not to *nix). I have 4 disks assembled in the following intel ahci bios fake raid arrays: 2x320GB RAID1 - used for operating systems md126 2x1TB RAID1 - used for data md125 I have used the raid of size 320GB to install my operating system and the second raid I didn't even select during the installation of Fedora 14. After successful partitioning and installation of Fedora, I tried to make the second array available, it was possible to make it visible in linux with mdadm --assembe --scan , after that I created one maximum size partition and 1 maximum size ext4 filesystem in it. Mounted, and used it. After restart - a few I/O errors during boot regarding md125 + inability to mount the filesystem on it and dropped into repair shell. I commented the filesystem in fstab and it booted. To my surprise, the array was marked as "auto read only": [root@localhost ~]# cat /proc/mdstat Personalities : [raid1] md125 : active (auto-read-only) raid1 sdc[1] sdd[0] 976759808 blocks super external:/md127/0 [2/2] [UU] md127 : inactive sdc[1](S) sdd[0](S) 4514 blocks super external:imsm md126 : active raid1 sda[1] sdb[0] 312566784 blocks super external:/md1/0 [2/2] [UU] md1 : inactive sdb[1](S) sda[0](S) 4514 blocks super external:imsm unused devices: <none> [root@localhost ~]# and the partition in it was not available as device special file in /dev: [root@localhost ~]# ls -l /dev/md125* brw-rw---- 1 root disk 9, 125 Jan 6 15:50 /dev/md125 [root@localhost ~]# But the partition is there according to fdisk: [root@localhost ~]# fdisk -l /dev/md125 Disk /dev/md125: 1000.2 GB, 1000202043392 bytes 19 heads, 10 sectors/track, 10281682 cylinders, total 1953519616 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x1b238ea9 Device Boot Start End Blocks Id System /dev/md125p1 2048 1953519615 976758784 83 Linux [root@localhost ~]# I tried to "activate" the array in different ways (I'm not experienced with mdadm and the man page is gigantic so I was only browsing it looking for my answer) but it was impossible - the array would still stay in "auto read only" and the device special file for the partition it will not be in /dev. It was only after I recreated the partition via fdisk that it reappeared in /dev... until next reboot. So, my question is - How do I make the array automatically available after reboot? Here is some additional information: 1st I am able to see the UUID of the array in blkid: [root@localhost ~]# blkid /dev/sdc: UUID="b9a1149f-ae11-4fc8-a600-0d77354dc42a" SEC_TYPE="ext2" TYPE="ext3" /dev/sdd: UUID="b9a1149f-ae11-4fc8-a600-0d77354dc42a" SEC_TYPE="ext2" TYPE="ext3" /dev/md126p1: UUID="60C8D9A7C8D97C2A" TYPE="ntfs" /dev/md126p2: UUID="3d1b38a3-b469-4b7c-b016-8abfb26a5d7d" TYPE="ext4" /dev/md126p3: UUID="1Msqqr-AAF8-k0wi-VYnq-uWJU-y0OD-uIFBHL" TYPE="LVM2_member" /dev/mapper/vg00-rootlv: LABEL="_Fedora-14-x86_6" UUID="34cc1cf5-6845-4489-8303-7a90c7663f0a" TYPE="ext4" /dev/mapper/vg00-swaplv: UUID="4644d857-e13b-456c-ac03-6f26299c1046" TYPE="swap" /dev/mapper/vg00-homelv: UUID="82bd58b2-edab-4b4b-aec4-b79595ecd0e3" TYPE="ext4" /dev/mapper/vg00-varlv: UUID="1b001444-5fdd-41b6-a59a-9712ec6def33" TYPE="ext4" /dev/mapper/vg00-tmplv: UUID="bf7d2459-2b35-4a1c-9b81-d4c4f24a9842" TYPE="ext4" /dev/md125: UUID="b9a1149f-ae11-4fc8-a600-0d77354dc42a" SEC_TYPE="ext2" TYPE="ext3" /dev/sda: TYPE="isw_raid_member" /dev/md125p1: UUID="420adfdd-6c4e-4552-93f0-2608938a4059" TYPE="ext4" [root@localhost ~]# Here is how /etc/mdadm.conf looks like: [root@localhost ~]# cat /etc/mdadm.conf # mdadm.conf written out by anaconda MAILADDR root AUTO +imsm +1.x -all ARRAY /dev/md1 UUID=89f60dee:e46a251f:7475814b:d4cc19a9 ARRAY /dev/md126 UUID=a8775c90:cee66376:5310fc13:63bcba5b ARRAY /dev/md125 UUID=b9a1149f:ae114fc8:a6000d77:354dc42a [root@localhost ~]# here is how /proc/mdstat looks like after I recreate the partition in the array so that it becomes available: [root@localhost ~]# cat /proc/mdstat Personalities : [raid1] md125 : active raid1 sdc[1] sdd[0] 976759808 blocks super external:/md127/0 [2/2] [UU] md127 : inactive sdc[1](S) sdd[0](S) 4514 blocks super external:imsm md126 : active raid1 sda[1] sdb[0] 312566784 blocks super external:/md1/0 [2/2] [UU] md1 : inactive sdb[1](S) sda[0](S) 4514 blocks super external:imsm unused devices: <none> [root@localhost ~]# Detailed output regarding the array in subject: [root@localhost ~]# mdadm --detail /dev/md125 /dev/md125: Container : /dev/md127, member 0 Raid Level : raid1 Array Size : 976759808 (931.51 GiB 1000.20 GB) Used Dev Size : 976759940 (931.51 GiB 1000.20 GB) Raid Devices : 2 Total Devices : 2 Update Time : Fri Jan 7 00:38:00 2011 State : clean Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 UUID : 30ebc3c2:b6a64751:4758d05c:fa8ff782 Number Major Minor RaidDevice State 1 8 32 0 active sync /dev/sdc 0 8 48 1 active sync /dev/sdd [root@localhost ~]# and /etc/fstab, with /data commented (the filesystem that is on this array): # # /etc/fstab # Created by anaconda on Thu Jan 6 03:32:40 2011 # # Accessible filesystems, by reference, are maintained under '/dev/disk' # See man pages fstab(5), findfs(8), mount(8) and/or blkid(8) for more info # /dev/mapper/vg00-rootlv / ext4 defaults 1 1 UUID=3d1b38a3-b469-4b7c-b016-8abfb26a5d7d /boot ext4 defaults 1 2 #UUID=420adfdd-6c4e-4552-93f0-2608938a4059 /data ext4 defaults 0 1 /dev/mapper/vg00-homelv /home ext4 defaults 1 2 /dev/mapper/vg00-tmplv /tmp ext4 defaults 1 2 /dev/mapper/vg00-varlv /var ext4 defaults 1 2 /dev/mapper/vg00-swaplv swap swap defaults 0 0 tmpfs /dev/shm tmpfs defaults 0 0 devpts /dev/pts devpts gid=5,mode=620 0 0 sysfs /sys sysfs defaults 0 0 proc /proc proc defaults 0 0 [root@localhost ~]# Thanks in advance to everyone that even read this whole issue :-)

    Read the article

  • How can I restore my system from WIM files?

    - by Brian Henk
    I installed another OS on my netbook and decided I want to revert back to Windows 7 Starter. I was careful to keep the recovery partition, but even when I manage to boot to it, the system just restarts a few seconds after selecting "restore." I grabbed all the files from the recovery partition onto a flash drive. I also have been able to use this drive to boot a Windows 7 install, but it was unable to find the recovery partition. These WIM files seem to be the key to installing Windows again. How can I use them?

    Read the article

  • Hyper-V 2008 R2 Install Question

    - by Bill
    I have 500GB HDD that I installed on the server. If I am going to load Hyper-V r2 on the bare system, do I set the partition to use all this space or is there a recommend smaller partition size I should set for Hyper-V to run within? This is my first time loading Hyper-V bare to the system. I feel like I should be able to create a small partition of like 40GB for Hyper-V to run within. Then create a second larger partion to store my VM images. Any thoughts or guidance on this?

    Read the article

  • Can I use a Retail DVD media with an OEM key to install Windows Vista?

    - by Sammy
    I got a Fujitsu computer with OEM license key and Windows Vista. I would like to reinstall Windows on it. But I didn't get any Windows media with it. However, I do poses more than just one DVD installation disc from my Retail copies of Windows Vista that I use on other computers. Can I use this media instead? Or do I have to order a specialty OEM DVD media from the manufacturer or Microsoft? Update: I have found some partition called "EISA" configuration partition. It is a hidden partition that I found in Disk Management. How can I make use of this? Do I boot from it or do I mount it to a drive letter and access it inside Windows? Can this be used to restore the computer? It is about 11 GB in size.

    Read the article

< Previous Page | 63 64 65 66 67 68 69 70 71 72 73 74  | Next Page >