Search Results

Search found 2981 results on 120 pages for 'recommended'.

Page 67/120 | < Previous Page | 63 64 65 66 67 68 69 70 71 72 73 74  | Next Page >

• Is there a NVIDIA driver (for a 7-series card) that will actually work for 12.10?

  - by DS13

  I see many similar topics on this, but I've tried all their suggestions, and nothing has worked. ISSUE: I do a clean install of Ubuntu 12.10. Boots fine with the “nouveau” graphics driver – graphics are very slow and choppy. The three other driver options in Ubuntu (official NVIDIA drivers), all result in a variation of the black screen on boot up. There will be NO access to a command line/GUI in anyway what-so-ever (tried every option recommended out there, but the system is unusable at this stage). I can only reinstall, and try different drivers…and I only ever get one shot at it. QUESTIONS: Does anyone know of a NVIDIA driver that will actually work with a Nvidia GeForce 7350LE? Or a 7-series card in general? This is my second computer, and I’m just trying to get a working install of Ubuntu on it. I don’t want to put much money into it, as I have seen Ubuntu run great on much older/less capable machines. I’ve got a decent Intel processor (2.3Ghz), 2GB of RAM, 320GB hard drive, 32-bit architecture, and there is no other O/S installed. It appears as if the graphics card is holding me back. Should I just buy a cheap graphics card (non-NVIDIA) to put in as a replacement? TRIED SO FAR: -all drivers available in Ubuntu *all fail -manual install of some different NVIDIA drivers *all fail -also tried installing the generic kernel, Nvidia driver doesn't work in 12.10 *no difference -every method suggested to at least get a command line after switching to a NVIDIA driver *all fail

  Read the article

• "Misaligned partition" - Should I do repartition (how?)

  - by RndmUbuntuAmateur

  Tried to install Ubuntu 12.04 from USB-stick alongside the existing Win7 OS 64bit, and now I'm not sure if install was completely successful: Disk Utility tool claims that the Extended partition (which contains Ubuntu partition and Swap) is "misaligned" and recommends repartition. What should I do, and if should I do this repartition, how to do it (especially if I would like not to lose the data on Win7 partition)? Background info: A considerably new Thinkpad laptop (UEFI BIOS, if that matters). Before install there were already a "SYSTEM_DRV" partition, the main Windows partition and a Lenovo recovery partition (all NTFS). Now the table looks like this: SYSTEM_DRV (sda1), Windows (sda2), Extended (sda4) (which contains Linux (sda5; ext4) and Swap (sda6)) and Recovery (sda3). Disk Utility Tool gives a message as follows when I select Ext: "The partition is misaligned by 1024 bytes. This may result in very poor performance. Repartitioning is suggested." There were couple of problems during the install, which I describe below, in the case they happen to be relevant. Installer claimed that it recognized existing OS'es fine, so I checked the corresponding option during the install. Next, when it asked me how to allocate the disk space, the first weird thing happened: the installer give me a graphical "slide" allocate disk space for pre-existing Win7 OS and new Ubuntu... but it did not inform me which partition would be for Ubuntu and which for Windows. ..well, I decided to go with the setting installer proposed. (not sure if this is relevant, but I guess I'd better mention it anyway - the previous partition tools have been more self-explanatory...) After the install (which reported no errors), GRUB/Ubuntu refused to boot. Luckily this problem was quite straightforwardly resolved with live-Ubuntu-USB and Boot-Repair ("Recommended repair" worked just fine). After all this hassle I decided to check the partition table "just to be sure"- and the disk utility gives the warning message I described.

  Read the article

• Making The EBS Upgrade From 11.5.10 Easier - Part II

  - by Annemarie Provisero

  ADVISOR WEBCAST: Making The EBS Upgrade From 11.5.10 Easier - Part II PRODUCT FAMILY: E-Business Suite July 12, 2011 at 8 am PT, 9 am MT, 11 am ET This one-hour session is recommended for technical users who are responsible for upgrading their E-Business Suite applications from Release 11.5.10 to Release 12.1.x. As you begin your upgrade process, there are a number of tools available to assist you in a successful upgrade. A successful upgrade requires careful planning, correct upgrade processing, detailed testing, and user (re)training prior to upgrade. Over three sessions we will discuss the tools that you can use to assist in your upgrade tasks. These tools are available to you via My Oracle Support and as part of the E-Business Suite product offerings. In In this second session, we’ll cover the following topics: Recap of Part I Detailed Look at Maintenance Wizard Detailed Look at Patch Wizard A short, live demonstration and question and answer period will be included. In the first part of the three-session series, we covered the following topics: Overview of Tools Available for Upgrading Upgrade versus Re-implementing Upgrade Community Upgrade Product Information Center Page Detailed Look at Upgrade Advisor A replay of that session is available via Note 740964.1,  Advisor Webcast Archive. A third session will be presented on July 19, 2011 to review best practices for using the upgrade tools. A short, live demonstration (only if applicable) and question and answer period will be included. Oracle Advisor Webcasts are dedicated to building your awareness around our products and services. This session does not replace offerings from Oracle Global Support Services. Click here to register for this session ------------------------------------------------------------------------------------------------------------- The above webcast is a service of the E-Business Suite Communities in My Oracle Support. For more information on other webcasts, please reference the Oracle Advisor Webcast Schedule.Click here to visit the E-Business Communities in My Oracle Support Note that all links require access to My Oracle Support.

  Read the article

• How to Create tree type CVL in Content server(UCM)

  - by rajeev.y.ranjan-oracle

  Steps to create tree choice list:1)Create a table "tblStates" with column "stateID" and "stateName". Click on "ADD Recommended".2) Create another table "tblCities with columns "cityID", "stateID" and "cityName".3)Then create two views on these tables namely "tblstateview" and "tblcityview".3)In "StateView" added two rows with values as JH and MH in stateID column.Jharkhand and Maharastra in stateName.4)Similarly in tblcityview added two rows with values as:BO and RA in cityID column.JH and MH in stateID columnBokaro and Mumbai in cityname column.5)Created relationship with Parentinfo "tblStates" and stateID and  childinfo with tblCities and stateID.6)Created metadata by name "Newtest"Enable option list,go to the configure ,Select use tree,Click on go edit definition 7)Tree Definition at level 1: a)Choose" tblstateView"b)Choose relation "newstatecity"At Level2:a)Choose cityView.Log out of the NativeUI and ContentUI and test the tree created by name "Newtest".

  Read the article

• Upgrading a hard disk – To repave or to migrate, that is the question

  - by guybarrette

  I recently changed my laptop hard disk from the stock 250GB 5400 drive to a 320GB 7200 drive.  And no, I didn’t bought a SSD drive because the cost is way too much right now.  At $70, my upgrade was a lot cheaper than a SSD drive.  Maybe next year. When changing a system main hard drive, one must ask himself: To repave or to migrate, that is the question.  I choose to migrate so I went to the Acronis Website to take a look at their product line.  They have a few products that could do the job.  One being Acronis Migrate Easy 7.0 and the other being Acronis True Image Home 2010.  Since True Image was just $10 more then Migrate Easy, I bought True Image. I inserted my new hard drive in a 2.5” USB enclosure, and started the migration process.  Once the data copied, I switched the drives.  The process went very smoothly and without hiccups.  Highly recommended. BTW, Acronis offers free trials so I guess that nothing can stop you from “testing” a migration  ;-) var addthis_pub="guybarrette";

  Read the article

• Applying Service Pack 1 to Team Foundation Server 2010

  - by Enrique Lima

  Disclosure:  I performed the following activities on my Windows 7 SP1 system, Visual Studio 2010 SP1 and a local Basic installation of TFS 2010. As with any deployment of a service pack into a server environment, take your recommended precautions and be aware of the changes you are putting in.  With that said, make sure you backup your databases, and that you have an exit/rollback strategy in the event of an unexpected situation. Team Foundation Server 2010 Service Pack 1 corresponds to KB2182621.  The KB article is http://support.microsoft.com/kb/2182621 The process will be very simple to follow, you will need to execute the mu_team_foundation_server_2010_sp1_x86_x64_651711.exe file.  That will extract files needed and launch the wizard driven Installation. Once this process completes, you need to validate the changes. By looking at Team Foundation Server 2010 Administration Console, you should see the reference to the KB number and SP1. There is also a good reason to validate log locations and records. From the Team Foundation Server 2010 Administration Console. Or from Windows Explorer, go to the C:\ProgramData\Microsoft\Team Foundation\Server Configuration\Logs location and review the logs referenced by the servicing references.

  Read the article

• Beta Period Closed for "Java EE 6 JavaServer Faces Developer Certified Expert Exam" Certification Exam (1Z1-896)

  - by Brandye Barrington

  The beta period is closed for Java EE 6 JavaServer Faces Developer Certified Expert Exam (Exam 1Z1-896), and registration is now open for the production version of the exam. Passing this exam leads to the Oracle Certified Expert, Java EE 6 JavaServer Faces Developer certification. Earning a JavaServer Faces certification can help you deliver lower cost and faster time to market by allowing the experienced Java developer to take the web page from conception to delivery, removing the need for multiple collaboration with web designers and developers. With the range of products built on JSF, developing an expertise through certification on this technology can open the door to a variety of opportunities and give you an edge over your peers. This certification is also a valuable addition to your existing Java EE 5 and EE 6 certifications, increasing your marketable skills and solidifying your credibility. While training is not required for certification, the Java EE 6: Develop Web Applications with JSF course from Oracle University, can expedite you towards your certification. Visit pearsonvue.com/oracle and register for exam 1Z0-896. You can get all preparation details, including exam objectives, number of questions, time allotments, and pricing on the Oracle Certification website. QUICK LINKS: Certification Track: Oracle Certified Expert, Java EE 6 JavaServer Faces Developer Certification Exam: Java EE 6 JavaServer Faces Developer Certified Expert Exam (1Z1-896) Recommended Training: Java EE 6: Develop Web Applications with JSF Certification Website: About Beta Exams Register Now: Pearson VUE

  Read the article

• How to remove all associated files and configuration settings of an app installed through 'force architecture' command

  - by Mysterio

  A few weeks ago I installed a 32 bit .deb file through the 'force architecture' command (on my 64bit notebook), however the procedure was unsuccessful and I used the apt-get purgecommand to uninstall the app. It seems there are some leftovers of the app I uninstalled which has now broken system update. Synaptic recommended a sudo apt-get install -fwhich I did in the terminal with this initial response: Reading package lists... Done Building dependency tree Reading state information... Done The following package was automatically installed and is no longer required: libntfs10 Use 'apt-get autoremove' to remove them. The following packages will be REMOVED: crossplatformui 0 upgraded, 0 newly installed, 1 to remove and 0 not upgraded. 1 not fully installed or removed. After this operation, 0 B of additional disk space will be used. Do you want to continue [Y/n]? I chose 'Y' then got this response: (Reading database ... 187616 files and directories currently installed.) Removing crossplatformui ... ztemtvcdromd: no process found dpkg: error processing crossplatformui (--remove): subprocess installed post-removal script returned error exit status 1 Errors were encountered while processing: crossplatformui E: Sub-process /usr/bin/dpkg returned an error code (1) It seems the app I installed crossplatformuiis still on my system and has caused update manager to stop running with a partial upgrade warning. What do I do now?

  Read the article

• Deal Registration Moves to Oracle Partner Store (OPS)- The Four Action Items for Partners

  - by Richard Lefebvre

  In November 2012, Oracle’s partner deal registration process will move to the Oracle Partner Store (OPS). During this time, OPS will become the single source for partners to register deals, obtain deal status, and place orders. What will partners need to do? 1. Request an OPS Account – If your company is new to OPS the first thing you need to do is request an account (if your company already has an OPS account, go to step 2). It’s important to have the person who will be managing your OPS account make this request as soon as possible. They will be set up as your company’s primary administrator. 2. Set-Up Users in OPS – Setup of users can start immediately, and will be handled by the primary OPS administrator at your company. The process is simple, but all existing users of Global PRM (Partner Relationship Management) deal registration will need to be set up in OPS before November 14, 2012.  3. Review/Action Any Registrations Pending Submission in PRM – Prior to November 14, 2012, all pending registrations should be submitted in the existing PRM system. It is important that this step is complete so registrations will not need to be re-entered when the system is moved to OPS on November 17, 2012. Registrations pending submission are easily identified on the registration listing screen with either “Incomplete” or “Returned to Partner” in the status column.  4. Attend Training – Oracle will offer multiple VAD and VAR training sessions beginning October 29, 2012. It is recommended that all users attend one of these important sessions.  Detailed instructions on each of these tasks can be found on the OPS Information Page. OPS will offer several enhancements to the deal registration process, including: Simplified Registration Form Easier Product Selection Expanded Browser Support Shared Registration Visibility Between VAD and VAR Pre-set Customer Selection From Partner Ordering Base Best Regards, Titina Ott Vice President, Worldwide A&C Systems And Business Processes 

  Read the article

• Please recommend the best tools to build a test plan management tool

  - by fzkl

  I have mostly worked on hardware testing in my professional career and would like to get onto the software development side. I thought working on a practically usable project will help motivate me and help acquire some skills. I have decided to build a test plan management tool for the QA team I work in (We use excel sheets!). The test plan management tool should be browser based and should support this: There would be many test plans, each test plan having test sets, test sets having test cases and test cases having instructions, attachments and Pass/fail status marking and bug info in case of failure. It should also have an export to excel option. I have a visual picture of the tool I am looking to build but I don't have enough experience to figure our where to start. My current programming skills are limited to C and shell programming and I want to pick up python. What tools (programming language, database and anything else?) would you recommend for me to get this done? Also what are the key concepts in the recommended programming language that I should focus on to build a browser based tool like this?

  Read the article

• Unity no longer loads in 13.04 for main user

  - by user152973

  When Ubuntu starts up, Unity fails to load (I can only see my desktop with no unity sidebar and no system bar in the top right). I tried the advice of Unity does not start in Ubuntu 13.04 which recommended the following commands: dconf reset -f /org/compiz/ unity --reset-icons &disown I ran the commands without errors an restarted the computer, but the problem persists. I am currently running Gnome. I have looked at other pages from the Google search "ubuntu unity failed to load 13.04", but the advice was similar to above and seems to be concerned with a system upgrade in April 18, 2013. I suspect my issue is something far more recent. Please give me advice on how to restore Unity on my account or at least figure out what the problem is. Thank you. Some information that might be relevant: -Unity has worked fine on 13.04 for the 6 months that I've had it until today. (November 10, 2013) -I have set up the update tool to automatically update when available. It is very possible that the system applied some updates without my knowledge. -Interestingly, Unity works fine on the Guest account. -I have made it so the system automatically logs me in at start-up. -This is a personal laptop. No one else has access to it. -I was not doing anything with the system settings or the terminal and have not installed any new software for the past 3 days. -I am running the System76 native Linux laptop Ultra Lemur. I did not contact their support yet because it seemed unlikely that this is a System76-specific error.

  Read the article

• Can anyone point me to some open source directX rendering engines or frameworks? [on hold]

  - by Jim

  I'm completely new to graphics API programmming, but not at all new to the theory and principle operation of game engines and rendering engines. That being said, I want to do some experiments of rendering very dense geometry scenes in a basic rendering engine or game engine. I don't need a lot of bells and whistles. What I need is enough control that I can implement my own scene graph algorithms and control the rendering pipeline very specifically. My ideal candidate engine would be either a rendering engine or game engine with a modular design that might be ready to go out of the box but would be simple enough in case I need to rip out some of the guts in the rendering management and implement my own. It's a tough call because I'm right at the level where it's almost better to go from scratch, but there's no sense in having to build every single basic thing such as heirarchical transforms, etc. I just want to work with rendering optimization to push dense geometry for maximum FPS. Does anyone have a suggestion for an engine or basic framework to use? I requested DirectX in my title because I figured it would likely be better supported and less likely for me to run into some obscure less-documented problem. But OpenGL might be acceptable if the recommended framework was definitely better than my other options. EDIT: I should add that I really want GPU tessellation support (part of adding to the density of geometry detail).

  Read the article

• Updating, etc., automatically

  - by Steve D

  Is there a way to set up Ubuntu 12.04 (or earlier versions) so that all recommended updates are done automatically, say once a week? When I say automatically, I mean no password entry or user intervention required. This sounds like a stupid request, so let me tell why I'm asking. My grandfather knows nothing about computers; he uses his solely to read Yahoo! mail. I want to get rid of his clunky, spyware-ridden Windows XP and install Ubuntu. I want to set it up so when he turns the computer on, after a couple minutes, voila!, Yahoo! mail, already signed in, ready to go. The problem is I don't want to have to go over there every week or so and make sure everything is up-to-date, he hasn't accidentally installed any spyware, etc. So can this be done? Is this the best way to set things up for my grandfather? Are there other things I should be worried about when it comes to keeping things hassle-free for him? Please don't post anything like "why not teach him how to... blah blah blah". My grandfather is 80 years old and has made it clear email is the only thing he will ever use a computer for! Thanks!

  Read the article

• Partitions for dual boot install with Windows

  - by Tim

  Following is the layout of the current partitions of my single hard drive viewed from Windows 7: C: has Windows 7 system files and my personal data; Q: for Lenovo recovery; SYSTEM_DRV: for Windows boot files; My goals are: to create another partition D: for my personal data, and dedicate C: for Windows system files and applications only. to install Ubuntu alongside Windows. D: will be shared between the two OSes. My questions are: Is it correct that the free space generated from shrinking C: will only be able to create an extended partition, since there are already 3 primary partitions? So must D: be one logical partition on the extended partition, just as the partitions for Ubuntu will be? Will this be bad sometime? If yes, other better solutions? What are the good utilities to accomplish the partition tasks? Can Ubuntu installer solely handle them? Or better to have some of the jobs done in Windows with some recommended softwares? Thanks and regards!

  Read the article

• Enabling GTX 570

  - by Silas

  Hello i just built up my new system: Asus Rock Z77 Extreme 4 Intel i7 3770k 16 Gb Corsair Ram Zotac Nvidia GTX 570 bequiet! 630W Power supply 120 GB SSD So after i installed UBUNTU 12.04 64 bit. It ran smoothly. I downloaded and installed all the recommended updates. After checking the Sytem details the GTX 570 didnt show up as graphics unit. so i figured i needed to download the drivers. So i did but being a complete newbie to linux i didnt succeed in installing them. (I think) Anyway after several tries and errors i shut down the PC and restarted it. Resultung in do Signal to my screen after trying to reboot and all the monitor outs with no result i took out the graphic card and now it boots normally but after booting it says there is a problem with the system the graphics cant be recognized something something. So Question A: What do i do? I Like linux but the arbitrarity of the Errors that occur without any changes to the system scare me. Question B: Is there A beginners guide to Ubuntu where i could start from scratch because i really want this to work? Question C: Now that the System is (suddently) showing these graphic errors So far without visible consequence despite the error message. should i reinstall the GPU and give the driver installation another try or the other way around? Ill be very grateful for any help. Thank you in advance!

  Read the article

• Can I upgrade my ubuntu version and change to be primary OS after originally installing with Wibu?

  - by Garrick Wann

  I have recently installed Ubuntu 12.04 using Wubi 12.04 and I now wish to upgrade to a full installation of Ubuntu 14.04, Before attempting to upgrade through the update center I did some research on upgrading from a Wubi installation (alongside windows) to a full installation making Ubuntu primary and only OS and found that it is in fact doable through the update center however it is just highly recommended to perform a full backup before doing so. I have now finished backing up all the data I need to worry about and began the upgrade process through the update center and received the following error: Your graphics hardware may not be fully supported in Ubuntu 14.04. Running the 'unity' desktop environment is not fully supported by your graphics hardware. You will maybe end up in a very slow environment after the upgrade. Our advice is to keep the LTS version for now. For more information see https://wiki.ubuntu.com/X/Bugs/UpdateManagerWarningForUnity3D Do you still want to continue with the upgrade? My questions are as follows: A. Isnt 14.04 a LTS version??? B, What are your recomendations in order to ensure my graphics driver is installed correctly and im not stuck with bad configs/install?

  Read the article

• Old Fglrx Driver - AMD Radeon HD 3200 - ubuntu won't start

  - by Yohannes

  I've been using Ubuntu 12.04 64 bit for about 2 weeks now and I installed the latest Fglrx driver (Graphics Card- AMD HD 3200, PC- Acer Aspire 5336, 4GB RAM, 500GB Harddrive). The problem is that sometimes video's lag and play out of sync sometimes the windows take long to show up after I've clicked them etc. After looking around I found a video on Youtube by Ubuntu help guy and in the video he recommended using an older driver if you have an older graphics card, his was about 4 years old (same as mine) and he used the 11.10 catalyst driver so I decided to try it. I removed the previous installation of the driver and then installed the 11.10 driver. However, when I restarted it instead of going to the GUI it goes to a terminal like window and asks for my login. Now its pretty clear I need to remove the old driver and go back to using the latest one. The only problem is I'm not sure where I saved the latest driver and in order to connect to the Internet I need to change /etc/resolv.conf (I use a static IP). So what should I do? Also anyone from personal experience, what propitiatory driver works best with my graphics card? As in the version. Thanks

  Read the article

• A Disk Read Error Occured. Press CTRL+ALT+DEL to restart

  - by darroosh

  I'm new to linux world. Just downloaded ubuntu and installed it alongside with windows 7 . In grub when I choose ubuntu, it opens with no problem, but when I try to open windows 7, this message appears: A Disk Read Error Occured. Press CTRL+ALT+DEL to restart. I googled for that problem which directed me to download a boot repair tool, when I choose : advanced options / retore MBR --> apply, then restart computer , It boot to win 7 without loading the grub menu. then I opened the live ubuntu from a USB, launched the "boot repair" again, choose : recommended repair , then restart, It returns to the first problem , grub menu appear, from which I can choose only ubuntu , but win 7 show this msg again : A Disk Read Error Occured. Press CTRL+ALT+DEL to restart. I repeated more and more with the same results ... What should I do? I created a boot info summary using the "boot repair tool" if this can help , it's in this URL.

  Read the article

• Free Xsigo Technical Pre-sales workshop for Selected Partners !

  - by mseika

  In 2012 Oracle acquired Xsigo, a developer of network I/O virtualisation solutions. This acquisition compliments Oracle’s extensive virtualisation portfolio. With Oracle Virtual Networking products (Xsigo) you can: Virtualise connectivity from any server to any storage and any network. Reduce datacentre complexity by 70% Cut infrastructure expenses by up to 50% Benefits to Channel Partners: Offer a unique proposition that your competitors can’t match. Provide an innovative solution that delivers more performance at less cost. High margins that help sell more products and services. This course is aimed at Technical Pre-Sales Consultants equipping them to provide detailed demos, and architect RFP feedback and customer solutions. The language of this event is French. WHEN24th September 2013 WHEREOracle France 15, boulevard Charles De Gaulle92715 COLOMBES FEESFree of charge 09.00: Welcome, Coffee & Introduction 09.30: Value Propositions, Architecture & Use Cases 11.30: Build a OVN Web Quote & TCO 12.30: Lunch 13.30: Competitive Summary 14.00: Design Scenario Workshop 15.45: Questions/Opportunities  REGISTRATION: Register via this link as soon as possible, 14th june, latest. Note that we have only 20 seats in total for this event. Note that after 14th june we will release free seats for other organizations to register. We look forward to your participation! What we expect from you: You will bring your own laptop. Recommended browser is Firefox 10 ESR. You have checked the material and conducted the assessments. You will be flexible in terms of Agenda and Progress as we intend this to be more of a Workshop having Dialogue rather than sticking tightly into the tentative timeline. What this is not: This PartnerLab does not replace Oracle University Trainings. This PartnerLab does not lead to a Certification as such. This PartnerLab does not enable Partners to full and complete implementation skills.

  Read the article

• OBIEE lifetime support

  - by THE

  I just received an email from the Development team explaining the detailed dates when what version of OBIEE will be in what stage of Support. So again for all readers who have not had the chance to look at the  lifetime Support policy from Oracle, I'll  try to explain this in easy words: Any major release is in "error correction support" by Development for another 12 months following the availability of a new major release. Examples: 11.1.1.5.0 was released in May 2011.  => So 11.1.1.3.0 (the version before that) went out of patching support ( or "error correction support" ) 12 months after that, i.e. June 2012. Note here: It went out of error correction support, which means Development will not fix bugs, or issue patches after that. The product can still be supported by Technical Support ( as "best effort support" ).So - Questions will still be answered, but there will not be fixes to bugs or glitches.11.1.1.6.0 was released in February 2012.  => Therefore 11.1.1.5.0 will be out of patching support / error correction support starting March 2013. I hope this clears up some of the questions/concerns that you might have had. Oh, and of course to mention the latest and recommended version to use: 11.1.1.6.0 + 11.1.1.6.5 bundle patch is "just what the doctor ordered".

  Read the article

• Is there a PROPRIETARY driver (NVIDIA or ATI) that actually works with 12.10?

  - by DS13

  NOTE: I see many similar topics on this, but I've tried all their suggestions, and nothing has worked. THE MAIN DIFFERENCE SEEMS TO BE: I always get a black screen with a blinking cursor, while others seem to get through the boot-up and see distorted graphics or just their wallpaper. ISSUE: I do a clean install of Ubuntu 12.10. Boots fine with the “nouveau” graphics driver – graphics (even just menus) are very slow, choppy, and distorted. The three other driver options in Ubuntu (official NVIDIA drivers), all result in a variation of the black screen on boot up. There will be NO access to a command line/GUI in anyway what-so-ever (tried every option recommended out there, but the system is unusable at this stage). I can only reinstall, and try different drivers…and I only ever get one shot at it. QUESTIONS: -Does anyone know of a PROPRIETARY driver that will actually work on 12.10 with a NVIDIA or ATI card? -Should I just buy a newer graphics card to put in as a replacement? MORE INFO: This is my second computer, and I’m just trying to get a working install of Ubuntu on it. I don’t want to put much money into it, as I have seen Ubuntu run great on much older/less capable machines. I’ve got a decent'ish Core2Duo Intel processor (2.13Ghz), 2GB of RAM, 320GB hard drive, 32-bit architecture, and there is no other O/S installed. It appears as if the graphics card (NVIDIA Geforce 7350 LE) is holding me back. TRIED SO FAR: -all drivers available in Ubuntu *all fail -manual install of some different NVIDIA drivers *all fail -also tried installing the generic kernel, Nvidia driver doesn't work in 12.10 *no difference -tried installing 12.04 *same results -every method suggested to at least get a command line after switching to a NVIDIA driver *all fail -UPDATE- Re-tried everything above with a new NVIDIA Geforce 210...same results for everything. -UPDATE #2- Re-tried everything above with a new AMD Radeon HD 6450...installed the proprietary driver from Ubuntu's "Software Sources" menu...EVERYTHING NOW WORKS. See "answer" below for summary.

  Read the article

• My sound is not working, so I'm going to reinstall FYI [closed]

  - by fer

  I've had trouble getting the sound to work in Ubuntu 12.04 I'm running an Acer Aspire 5739g laptop. This is using a clean install. This wasn't a problem when ubuntu first installed. Rather, it was when I ran the updates that it stopped working. I already tried the suggestions on the ubuntu sites and other similar queries, and they haven't fixed it. Something in the updates is making my sound not work. Edit: It turns out that this might be a bug (the sound issue, first paragraph). After reinstall, it happened again (it's not caused by updates at all, or any software, because I fixed it now w/o reinstall). It seems like I replicated it as follows: I changed auto-hide in the behavior tab of Appearance settings by turning it on, and setting the sensitivity to below the recommended setting. Then instead of restarting, I just logged out and back in. The sound stopped working again. I set the behavior settings to default, restarted, and now it's back to normal. Not sure if it's due to only logging out (and not restarting) or b/c I set my sensitivity to a low setting. Not sure if this helps anyone, but thought I'd mention it.

  Read the article

• MySQL Connector/Net 6.6 GA has been released

  - by fernando

  MySQL Connector/Net 6.6, a new version of the all-managed .NET driver for MySQL has been released.  This is the GA intended to introduce users to the new features in the release.  This release is feature complete. It is recommended for use in production environments. It is appropriate for use with MySQL server versions 5.0-5.6 It is now available in source and binary form from http://dev.mysql.com/downloads/connector/net/#downloads and mirror sites (note that not all mirror sites may be up to date at this point-if you can't find this version on some mirror, please try again later or choose another download site.) The 6.6 version of MySQL Connector/Net brings the following new features:   * Stored routine debugging   * Entity Framework 4.3 Code First support   * Pluggable authentication (now third parties can plug new authentications mechanisms into the driver).   * Full Visual Studio 2012 support: everything from Server Explorer to Intellisense&   the Stored Routine debugger. The release is available to download athttp://dev.mysql.com/downloads/connector/net/6.6.html Documentation ------------------------------------- You can view current Connector/Net documentation at http://dev.mysql.com/doc/refman/5.5/en/connector-net.html For specific topics: Stored Routine Debugger:http://dev.mysql.com/doc/refman/5.5/en/connector-net-visual-studio-debugger.html Authentication plugin:http://dev.mysql.com/doc/refman/5.5/en/connector-net-programming-authentication-user-plugin.html You can find our team blog at http://blogs.oracle.com/MySQLOnWindows. You can also post questions on our forums at http://forums.mysql.com/. Enjoy and thanks for the support! 

  Read the article

• ADF Logging In Deployed Apps

  - by Duncan Mills

  Harking back to my series on using the ADF logger and the related  ADF Insider Video, I've had a couple of queries this week about using the logger from Enterprise Manager (EM). I've alluded in those previous materials to how EM can be used but it's evident that folks need a little help.  So in this article, I'll quickly look at how you can switch logging on from the EM console for an application and how you can view the output.  Before we start I'm assuming that you have EM up and running, in my case I have a small test install of Fusion Middleware Patchset 5 with an ADF application deployed to a managed server. Step 1 - Select your Application In the EM navigator select the app you're interested in: At this point you can actually bring up the context ( right mouse click) menu to jump to the logging, but let's do it another way.  Step 2 - Open the Application Deployment Menu At the top of the screen, underneath the application name, you'll find a drop down menu which will take you to the options to view log messages and configure logging, thus: Step 3 - Set your Logging Levels  Just like the log configuration within JDeveloper, we can set up transient or permanent (not recommended!) loggers here. In this case I've filtered the class list down to just oracle.demo, and set the log level to config. You can now go away and do stuff in the app to generate log entries. Step 4 - View the Output  Again from the Application Deployment menu we can jump to the log viewer screen and, as I have here, start to filter down the logging output to the stuff you're interested in.  In this case I've filtered by module name. You'll notice here that you can again look at related log messages. Importantly, you'll also see the name of the log file that holds this message, so it you'd rather analyse the log in more detail offline, through the ODL log analyser in JDeveloper, then you can see which log to download.

  Read the article

• ADF Hands on Training &ndash; Prerequisites for 22nd March 2011

  - by Grant Ronald

  For those of you coming to the ADF Hands on training on the 22nd March in London, there was a link to the prerequisites.  Unfortunately, in a reshuffle of content on OTN, this page was removed.  So, over the next day or so I’m hoping to the pull together the relevant information into this blog post.  So keep checking back! Firstly, you need to being your laptop with you to do the hands on exercises.  No laptop, no hands on. Recommended 2GB RAM running Microsoft Windows XP SP2, 2003 Server SP2, Vista (32 bit only), Windows 7 or Linux or Mac 2GHz Processor (less will be acceptable but slower) Mozilla Firefox 2.0 or higher, Internet Explorer 7 or higher, Safari 3.0 and higher, Google Chrome 1.0 or higher Winzip or other extracting software Adobe Acrobat reader Flash (if you want to see dynamic graphs in your application) As for software, you will need have installed JDeveloper 11g.  The hands on instructions are based on 11.1.1.2 (or is it 11.1.1.3)! anyway, either of those or 11.1.1.4 would be required. You also need an Oracle database on your machine and access to the HR schema (which should be unlocked).  Don’t expect to have access to a network and VPN to a database. A simple test, unplug your laptop from your corporate network, run up JDev  and select File –> New –> Database connection and make sure you can connect to HR database and see the Emp/Dept etc tables.  If you can do that, you should be good to go. I would strongly recommend ensuring you have this in place before you arrive on Tuesday. Look forward to seeing you there.

  Read the article

< Previous Page | 63 64 65 66 67 68 69 70 71 72 73 74  | Next Page >