Search Results

Search found 1712 results on 69 pages for 'respond with'.

Page 67/69 | < Previous Page | 63 64 65 66 67 68 69  | Next Page >

  • Different Flavors of Leases Back On

    - by Theresa Hickman
    Given the continued interest regarding the proposed changes to Lease Accounting, I decided to write another entry on this controversial topic with colorful commentary from our resident accounting expert, Seamus Moran. Background (A History Lesson) Back in 1976, the FASB issued FAS 13, “Accounting for Leases” that permitted leases to be either an operating lease or capital (finance) lease. In substance, operating leases are a form of off-balance sheet financing. According to Seamus, operating leases date back to the launch of the Boeing 707 in the 1950s.  Because the aircraft was so much more expensive than previous aircrafts, the industry came up with the operating lease concept to accommodate these jet liners that dominated air transport.  How it worked was the bank would buy the plane and lease it to the airline.  Because the bank never controlled or flew the plane, they never placed the asset on their balance sheet, and because the airline never owned the plane, they didn’t place it on their balance sheet either. They simply treated the monthly lease payments as rental expenses on the P&L.   August 2010 Original Lease Accounting Changes In August 2010, FASB and IASB decided to overhaul lease accounting as part of their joint commitment “to insure that investors and other users of financial statements are provided useful, transparent, and complete information about leasing transactions in the financial statements.”  Some say that the current lease accounting standards are broken because it keeps assets off the balance sheet, hidden from investors’ view. The original proposal abolished operating leases and only permitted capital leases where all leases would be recorded on the balance sheet as assets and liabilities. The asset side would reflect the right to use the asset for the leased term, and the liability side would reflect the obligation to make lease payments.   Why Companies Were Freaking Out According to the SEC, the financial impact of the aforementioned lease changes was estimated to add more than $1.3 trillion of operating lease obligations to corporate balance sheets. Many companies in various industries, especially retail, are concerned because the changes are significant and will impact existing leases with no grandfather clause for existing operating leases. Of course, the banks and airlines I mentioned earlier really hate this because neither wants to report the airplane (now costing around $60 M) as an asset. Regular companies were concerned that they would have to report routine short term leases of real estate or equipment as fixed assets, even though they were really just longer term rentals.  One company we spoke to leased roadside billboards, and really did not consider them to be fixed assets in any way. Obviously, these changes would have had a profound and lasting effect on a company’s financial and real estate strategies and significantly impact its financial statements.  Financial statements would show higher depreciation and interest expense with significantly higher total assets and debt. In terms of financial metrics, they’re negatively impacted. It would raise a company’s debt-to-capital ratio to reflect the higher debt compared to equity, it would negatively impact their return-on-assets because now companies will appear more asset intensive, and it will decrease EPS, lowering shareholder ROI. Feb. 2011 Recent Update The comment period on leases closed in December 2010. The FASB and the IASB have met several times since then and published their initial responses to the input they received from the various interested parties.  They are “redeliberating” the principles involved in Lease Accounting.  Some of the issues they are looking at include: The core definition of a lease.  This will articulate principles on what is a lease and what is “not-a-lease.” One theory or supposition is that they might define a lease as the transfer of certain but not all major ownership attributes for a certain period of time.  So a year’s lease of an aircraft might be a “lease,” but a year’s lease of half a floor in an office building would be “not-a-lease.”  The ownership attributes transferred from the core owner to the user are different; the airline must maintain, paint, and do whatever it needs to do on the aircraft. However, the office renter will have strictly limited rights in respect to the rented space. The differences between a lease contract and service contract.  Even if they call them “leases” for the purpose of commercial law, a service contract might not be accounted for as a lease. The accounting to be done by the lessee.  They would define when the bank or landlord would retain the asset on their balance sheet, and perhaps by implication, when the lessor would not need to include the asset on theirs.  So if the finance house keeps the airplane or office on their balance sheet, the tenant doesn’t need to.  I’m not sure that I can draw the opposite conclusion where the finance house doesn’t report but the tenant must. The difference, if any, between a financing lease and other leases, and the implications to the accounting. The present value calculation when renewable terms exist. They have reduced the circumstances in which one must look at the renewable terms of a lease in calculating the present value.  In most circumstances, you will use the lease term rather than the potential renewable term. Their latest discussion this past week with the contents of the discussion was not available at the time of me writing this entry.  For more details, the results of the discussions are posted on both the FASB and the IASB websites. Implied Software Changes Whatever the final rules turn out to be, all ERP systems, such as Oracle E-Business Suite, PeopleSoft Enterprise, JD Edwards, and Oracle Hyperion will need to change their software to accommodate the new rules. The following lists some changes that might have to be made to accounting software depending on what the final standards will be in June 2011: Lease tracking may require modifications with tracking of additional lease details that might require a centralized repository to maintain Accounting may need to be modified as there are many changes to how capital leases and the new “other than finance” leases are accounted for both on the lessee and lessor side.  For example, valuation, amortization, and disclosure will be considerably different requiring different types of data to be captured. Companies may need to modify their chart of accounts depending on how they want to track leases, which could then impact financial reporting and consolidation Business processes may require changes which could then impact internal controls Software applications may need to perform more advanced computations on leases Reports and KPIs may need to reflect new operating metrics Hold Onto Your Seats           Before you redo all your lease agreements and call your software vendors asking when the changes to the software will be made, remember that the rules are not finalized yet, and from appearances, will not reflect the proposals in the exposure draft.  Not only are there objections to putting the operating lease assets on anyone’s balance sheet, there are lots of objections to subjectivity and the data required for the valuation.  According to Seamus, there is huge opposition from New York bankers, the airlines, the EU, the Communist Party of China (since it impacts their exporting business), and Republicans (hearing complaints from small and large businesses). Even if everyone can agree on the proposed changes, 2013 might be the earliest that companies would need to change how they report leases. The Boards will finish their deliberations in April, May or June 2011.  As we’ve seen with other Exposure Drafts, if the changes are minor and the principles met the General Acceptance consensus criteria, the Standard could be finalized at that time.  However, if substantial changes are made, a fresh exposure draft, comment period, and review period might be involved, too. Seamus added an interesting perspective. Even if the proposed changes do pass, don’t you think our customers, such as Boeing, GE Capital, United Airlines, etc. will be clever enough to come up with a new kind of financing arrangement that complies with the new accounting? How about the large retail customers, such as Best Buy and Macerich? Don’t you think they might simply cut deals around retail locations with new contracts that prevent their leases from being capital leases? Instead of blindly adapting the software to meet the principles outlined in the final standard, our software needs to accommodate how businesses will respond to the new rules. We cannot know our customers’ responses until the rules are finalized. Oracle is aware of the potential changes and is staying abreast of the developments through our domain expertise staff, our relationship with customers, our market awareness, and, of course, our relationships with the Big 4. This is part of our normal process with respect to worldwide regulatory compliance. Oracle products have been IFRS and GAAP compliant for years and we will continue to maintain those standards going forward.

    Read the article

  • Implementing a post-notification function to perform custom validation

    - by Alejandro Sosa
    Introduction Oracle Workflow Notification System can be extended to perform extra validation or processing via PLSQL procedures when the notification is being responded to. These PLSQL procedures are called post-notification functions since they are executed after a notification action such as Approve, Reject, Reassign or Request Information is performed. The standard signature for the post-notification function is     procedure <procedure_name> (itemtype  in varchar2,                                itemkey   in varchar2,                                actid     in varchar2,                                funcmode  in varchar2,                                resultout in out nocopy varchar2); Modes The post-notification function provides the parameter 'funcmode' which will have the following values: 'RESPOND', 'VALIDATE, and 'RUN' for a notification is responded to (Approve, Reject, etc) 'FORWARD' for a notification being forwarded to another user 'TRANSFER' for a notification being transferred to another user 'QUESTION' for a request of more information from one user to another 'QUESTION' for a response to a request of more information 'TIMEOUT' for a timed-out notification 'CANCEL' when the notification is being re-executed in a loop. Context Variables Oracle Workflow provides different context information that corresponds to the current notification being acted upon to the post-notification function. WF_ENGINE.context_nid - The notification ID  WF_ENGINE.context_new_role - The new role to which the action on the notification is directed WF_ENGINE.context_user_comment - Comments appended to the notification   WF_ENGINE.context_user - The user who is responsible for taking the action that updated the notification's state WF_ENGINE.context_recipient_role - The role currently designated as the recipient of the notification. This value may be the same as the value of WF_ENGINE.context_user variable, or it may be a group role of which the context user is a member. WF_ENGINE.context_original_recipient - The role that has ownership of and responsibility for the notification. This value may differ from the value of the WF_ENGINE.context_recipient_role variable if the notification has previously been reassigned.  Example Let us assume there is an EBS transaction that can only be approved by a certain people thus any attempt to transfer or delegate such notification should be allowed only to users SPIERSON or CBAKER. The way to implement this functionality would be as follows: Edit the corresponding workflow definition in Workflow Builder and open the notification. In the Function Name enter the name of the procedure where the custom code is handled, for instance, TEST_PACKAGE.Post_Notification In PLSQL create the corresponding package TEST_PACKAGE with a procedure named Post_Notification, as follows:     procedure Post_Notification (itemtype  in varchar2,                                  itemkey   in varchar2,                                  actid     in varchar2,                                  funcmode  in varchar2,                                  resultout in out nocopy varchar2) is     l_count number;     begin       if funcmode in ('TRANSFER','FORWARD') then         select count(1) into l_count         from WF_ROLES         where WF_ENGINE.context_new_role in ('SPIERSON','CBAKER');               --and/or any other conditions         if l_count<1 then           WF_CORE.TOKEN('ROLE', WF_ENGINE.context_new_role);           WF_CORE.RAISE('WFNTF_TRANSFER_FAIL');         end if;       end if;     end Post_Notification; Launch the workflow process with the changed notification and attempt to reassign or transfer it. When trying to reassign the notification to user CBROWN the screen would like like below: Check the Workflow API Reference Guide, section Post-Notification Functions, to see all the standard, seeded WF_ENGINE variables available for extending notifications processing. 

    Read the article

  • Intermittent temporary GUI freeze in Ubuntu 11.10

    - by Oscar
    I've been using Ubuntu 11.10 for a month or so. In the last week it's started freezing randomly (every few hours or minutes). I can still move the mouse and switch to other terminals with ctrl+alt. I thought this was purely a gui issue as I could continue entering commands (mouse clicks and keys) which seem to be processed once the system resumes (generally 30 seconds to a few minutes). I'm using gnome and metacity. I can't identify anything in particular that triggers the freezes. Saving a file in LibreOffice causes the system to hang. I tried disabling most of the services I've installed (dropbox, autokey, etc.) but doesn't help. Switching to another terminal and running top, the CPU column is shared equally among all of my processes (i.e. non-root). I have no idea what that signifies. My PC is unusable in this state. CPU model name : Pentium(R) Dual-Core CPU E6700 @ 3.20GHz [7m PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND [0;10m[39;49m[K [0;10m[0;10m 1499 ogga 20 0 404m 32m 13m R 10 0.8 0:28.19 python [0;10m[39;49m [0;10m[0;10m 1501 ogga 20 0 216m 13m 6224 R 10 0.3 0:18.28 ibus-x11 [0;10m[39;49m [0;10m[0;10m 1679 ogga 20 0 449m 34m 15m R 10 0.9 0:41.10 gnome-panel [0;10m[39;49m [0;10m[0;10m 1710 ogga 20 0 350m 15m 8324 R 10 0.4 0:18.25 bluetooth-apple [0;10m[39;49m [0;10m[0;10m 1752 ogga 20 0 458m 37m 13m R 10 0.9 0:22.62 autokey-gtk [0;10m[39;49m [0;10m[0;10m 2081 ogga 20 0 354m 17m 9800 R 10 0.5 0:16.36 update-notifier [0;10m[39;49m [0;10m[0;10m 5439 ogga 20 0 640m 104m 38m R 10 2.6 0:45.17 chromium-browse [0;10m[39;49m [0;10m[0;10m 5586 ogga 20 0 381m 42m 21m R 10 1.1 0:20.17 chromium-browse [0;10m[39;49m [0;10m[0;10m 6422 ogga 20 0 529m 59m 18m R 10 1.5 0:28.15 sublime_text [0;10m[39;49m [0;10m[0;10m 1362 ogga 20 0 264m 14m 7884 R 8 0.4 0:18.29 gnome-session [0;10m[39;49m [0;10m[0;10m 1673 ogga 20 0 351m 17m 9768 R 8 0.4 0:21.78 metacity [0;10m[39;49m [0;10m[0;10m 1708 ogga 20 0 249m 13m 7156 R 8 0.3 0:18.23 gnome-fallback- [0;10m[39;49m [0;10m[0;10m 1709 ogga 20 0 572m 28m 15m R 8 0.7 0:18.37 nautilus [0;10m[39;49m [0;10m[0;10m 1722 ogga 20 0 467m 18m 9m R 8 0.5 0:18.43 nm-applet [0;10m[39;49m [0;10m[0;10m 1727 ogga 20 0 225m 12m 6304 R 8 0.3 0:18.24 polkit-gnome-au [0;10m[39;49m [0;10m[0;10m 1731 ogga 20 0 422m 19m 10m R 8 0.5 0:26.62 gnome-sound-app [0;10m[39;49m [0;10m[0;10m 1735 ogga 20 0 306m 31m 13m R 8 0.8 0:18.37 python [0;10m[39;49m [0;10m[0;10m 1754 ogga 20 0 286m 16m 8912 R 8 0.4 0:18.90 vino-server [0;10m[39;49m [0;10m[0;10m 1798 ogga 20 0 246m 15m 7476 R 8 0.4 0:18.25 gnome-screensav [0;10m[39;49m [0;10m[0;10m 1851 ogga 20 0 185m 14m 7256 R 8 0.4 0:18.18 gdu-notificatio [0;10m[39;49m [0;10m[0;10m 1923 ogga 20 0 251m 28m 11m R 8 0.7 0:17.96 applet.py [0;10m[39;49m [0;10m[0;10m 4085 ogga 20 0 378m 22m 11m R 8 0.6 0:18.19 gnome-terminal [0;10m[39;49m [0;10m 4213 ogga 20 0 263m 73m 15m S 2 1.9 3:57.44 skype [0;10m[39;49m [0;10m 1 root 20 0 24188 1492 1320 S 0 0.0 0:00.45 init [0;10m[39;49m [0;10m 2 root 20 0 0 0 0 S 0 0.0 0:00.00 kthreadd [0;10m[39;49m [0;10m 3 root 20 0 0 0 0 S 0 0.0 0:02.27 ksoftirqd/0 [0;10m[39;49m [0;10m 6 root RT 0 0 0 0 S 0 0.0 0:00.00 migration/0 [0;10m[39;49m [0;10m 7 root RT 0 0 0 0 S 0 0.0 0:00.00 migration/1 [0;10m[39;49m [0;10m 9 root 20 0 0 0 0 S 0 0.0 0:01.97 ksoftirqd/1 [0;10m[39;49m [0;10m 10 root 20 0 0 0 0 S 0 0.0 0:01.16 kworker/0:1 [0;10m[39;49m [0;10m 11 root 0 -20 0 0 0 S 0 0.0 0:00.00 cpuset [0;10m[39;49m [0;10m 12 root 0 -20 0 0 0 S 0 0.0 0:00.00 khelper [0;10m[39;49m [0;10m 13 root 0 -20 0 0 0 S 0 0.0 0:00.00 netns [0;10m[39;49m [0;10m 15 root 20 0 0 0 0 S 0 0.0 0:00.00 sync_supers [0;10m[39;49m [0;10m 16 root 20 0 0 0 0 S 0 0.0 0:00.00 bdi-default [0;10m[39;49m [0;10m 17 root 0 -20 0 0 0 S 0 0.0 0:00.00 kintegrityd [0;10m[39;49m [0;10m 18 root 0 -20 0 0 0 S 0 0.0 0:00.00 kblockd [0;10m[39;49m [0;10m 19 root 0 -20 0 0 0 S 0 0.0 0:00.00 ata_sff [0;10m[39;49m [0;10m 20 root 20 0 0 0 0 S 0 0.0 0:00.00 khubd [0;10m[39;49m [0;10m 21 root 0 -20 0 0 0 S 0 0.0 0:00.00 md [0;10m[39;49m [0;10m 23 root 20 0 0 0 0 S 0 0.0 0:00.00 khungtaskd [0;10m[39;49m [0;10m 24 root 20 0 0 0 0 S 0 0.0 0:00.14 kswapd0 [0;10m[39;49m [0;10m 25 root 25 5 0 0 0 S 0 0.0 0:00.00 ksmd [0;10m[39;49m [0;10m 26 root 39 19 0 0 0 S 0 0.0 0:00.00 khugepaged [0;10m[39;49m [0;10m 27 root 20 0 0 0 0 S 0 0.0 0:00.00 fsnotify_mark [0;10m[39;49m [0;10m 28 root 20 0 0 0 0 S 0 0.0 0:00.00 ecryptfs-kthrea [0;10m[39;49m [0;10m 29 root 0 -20 0 0 0 S 0 0.0 0:00.00 crypto [0;10m[39;49m [0;10m 37 root 0 -20 0 0 0 S 0 0.0 0:00.00 kthrotld [0;10m[39;49m [0;10m 38 root 20 0 0 0 0 S 0 0.0 0:00.00 scsi_eh_0 [0;10m[39;49m [0;10m 39 root 20 0 0 0 0 S 0 0.0 0:00.00 scsi_eh_1 [0;10m[39;49m [0;10m 41 root 20 0 0 0 0 S 0 0.0 0:00.00 scsi_eh_2 [0;10m[39;49m [0;10m 42 root 20 0 0 0 0 S 0 0.0 0:00.00 scsi_eh_3 [0;10m[39;49m [0;10m 64 root 20 0 0 0 0 S 0 0.0 0:02.98 kworker/0:2 [0;10m[39;49m [0;10m 242 root 20 0 0 0 0 S 0 0.0 0:00.39 jbd2/sdb1-8 [0;10m[39;49m [0;10m 243 root 0 -20 0 0 0 S 0 0.0 0:00.00 ext4-dio-unwrit [0;10m[39;49m [0;10m 288 root 20 0 17236 448 448 S 0 0.0 0:00.04 upstart-udev-br [0;10m[39;49m [0;10m 295 root 20 0 21752 884 796 S 0 0.0 0:00.06 udevd And at another time: [7m PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND [0;10m[39;49m[K [0;10m[0;10m 1757 ogga 20 0 222m 9932 6300 R 13 0.2 0:05.69 polkit-gnome-au [0;10m[39;49m [0;10m[0;10m 1559 ogga 20 0 152m 9764 6112 R 13 0.2 0:05.77 ibus-x11 [0;10m[39;49m [0;10m[0;10m 1786 ogga 20 0 457m 33m 13m R 13 0.9 0:06.10 autokey-gtk [0;10m[39;49m [0;10m[0;10m 1395 ogga 20 0 262m 12m 7880 R 12 0.3 0:05.88 gnome-session [0;10m[39;49m [0;10m[0;10m 1557 ogga 20 0 403m 31m 13m R 12 0.8 0:14.95 python [0;10m[39;49m [0;10m[0;10m 1745 ogga 20 0 247m 11m 7196 R 12 0.3 0:05.69 gnome-fallback- [0;10m[39;49m [0;10m[0;10m 1767 ogga 20 0 237m 26m 11m R 12 0.7 0:05.87 python [0;10m[39;49m [0;10m[0;10m 1713 ogga 20 0 440m 25m 13m R 12 0.6 0:13.76 gnome-panel [0;10m[39;49m [0;10m[0;10m 1747 ogga 20 0 348m 13m 8328 R 11 0.3 0:05.22 bluetooth-apple [0;10m[39;49m [0;10m[0;10m 1754 ogga 20 0 465m 16m 10m R 11 0.4 0:05.21 nm-applet [0;10m[39;49m [0;10m[0;10m 1710 ogga 20 0 167m 11m 7564 R 11 0.3 0:05.21 metacity [0;10m[39;49m [0;10m[0;10m 1761 ogga 20 0 406m 17m 9928 R 11 0.4 0:12.71 gnome-sound-app [0;10m[39;49m [0;10m[0;10m 1789 ogga 20 0 283m 13m 8852 R 11 0.3 0:05.55 vino-server [0;10m[39;49m [0;10m[0;10m 1815 ogga 20 0 243m 11m 7452 R 11 0.3 0:05.17 gnome-screensav [0;10m[39;49m [0;10m[0;10m 1885 ogga 20 0 182m 11m 7256 R 11 0.3 0:05.18 gdu-notificatio [0;10m[39;49m [0;10m[0;10m 1957 ogga 20 0 249m 25m 11m R 11 0.7 0:05.32 applet.py [0;10m[39;49m [0;10m[0;10m 2067 ogga 20 0 260m 12m 7828 R 11 0.3 0:05.21 update-notifier [0;10m[39;49m [0;10m 1975 ogga 20 0 292m 48m 11m S 0 1.2 0:08.28 ubuntuone-syncd [0;10m[39;49m [0;10m[0;10m 2363 ogga 20 0 21468 1384 988 R 0 0.0 0:00.01 top [0;10m[39;49m [0;10m 1 root 20 0 24284 2296 1320 S 0 0.1 0:00.46 init [0;10m[39;49m [0;10m 2 root 20 0 0 0 0 S 0 0.0 0:00.00 kthreadd [0;10m[39;49m [0;10m 3 root 20 0 0 0 0 S 0 0.0 0:00.05 ksoftirqd/0 [0;10m[39;49m [0;10m 4 root 20 0 0 0 0 S 0 0.0 0:00.00 kworker/0:0 [0;10m[39;49m [0;10m 5 root 20 0 0 0 0 S 0 0.0 0:00.19 kworker/u:0 [0;10m[39;49m [0;10m 6 root RT 0 0 0 0 S 0 0.0 0:00.00 migration/0 [0;10m[39;49m [0;10m 7 root RT 0 0 0 0 S 0 0.0 0:00.00 migration/1 [0;10m[39;49m [0;10m 8 root 20 0 0 0 0 S 0 0.0 0:00.00 kworker/1:0 [0;10m[39;49m [0;10m 9 root 20 0 0 0 0 S 0 0.0 0:00.06 ksoftirqd/1 [0;10m[39;49m [0;10m 10 root 20 0 0 0 0 S 0 0.0 0:00.09 kworker/0:1 [0;10m[39;49m [0;10m 11 root 0 -20 0 0 0 S 0 0.0 0:00.00 cpuset [0;10m[39;49m [0;10m 12 root 0 -20 0 0 0 S 0 0.0 0:00.00 khelper [0;10m[39;49m [0;10m 13 root 0 -20 0 0 0 S 0 0.0 0:00.00 netns [0;10m[39;49m [0;10m 14 root 20 0 0 0 0 S 0 0.0 0:00.25 kworker/u:1 [0;10m[39;49m [0;10m 15 root 20 0 0 0 0 S 0 0.0 0:00.00 sync_supers [0;10m[39;49m [0;10m 16 root 20 0 0 0 0 S 0 0.0 0:00.00 bdi-default [0;10m[39;49m [0;10m 17 root 0 -20 0 0 0 S 0 0.0 0:00.00 kintegrityd [0;10m[39;49m [0;10m 18 root 0 -20 0 0 0 S 0 0.0 0:00.00 kblockd [0;10m[39;49m [0;10m 19 root 0 -20 0 0 0 S 0 0.0 0:00.00 ata_sff [0;10m[39;49m [0;10m 20 root 20 0 0 0 0 S 0 0.0 0:00.00 khubd [0;10m[39;49m [0;10m 21 root 0 -20 0 0 0 S 0 0.0 0:00.00 md [0;10m[39;49m [0;10m 22 root 20 0 0 0 0 S 0 0.0 0:00.22 kworker/1:1 [0;10m[39;49m [0;10m 23 root 20 0 0 0 0 S 0 0.0 0:00.00 khungtaskd [0;10m[39;49m [0;10m 24 root 20 0 0 0 0 S 0 0.0 0:00.00 kswapd0 [0;10m[39;49m [0;10m 25 root 25 5 0 0 0 S 0 0.0 0:00.00 ksmd [0;10m[39;49m [0;10m 26 root 39 19 0 0 0 S 0 0.0 0:00.00 khugepaged [0;10m[39;49m [0;10m 27 root 20 0 0 0 0 S 0 0.0 0:00.00 fsnotify_mark [0;10m[39;49m [0;10m 28 root 20 0 0 0 0 S 0 0.0 0:00.00 ecryptfs-kthrea [0;10m[39;49m [0;10m 29 root 0 -20 0 0 0 S 0 0.0 0:00.00 crypto [0;10m[39;49m [0;10m 37 root 0 -20 0 0 0 S 0 0.0 0:00.00 kthrotld [0;10m[39;49m [0;10m 38 root 20 0 0 0 0 S 0 0.0 0:00.00 scsi_eh_0 [0;10m[39;49m [0;10m 39 root 20 0 0 0 0 S 0 0.0 0:00.00 scsi_eh_1 [0;10m[39;49m [0;10m 40 root 20 0 0 0 0 S 0 0.0 0:00.00 kworker/u:2 [0;10m[39;49m [0;10m 41 root 20 0 0 0 0 S 0 0.0 0:00.00 scsi_eh_2 [0;10m[39;49m [0;10m 42 root 20 0 0 0 0 S 0 0.0 0:00.00 scsi_eh_3 [0;10m[39;49m [0;10m 43 root 20 0 0 0 0 S 0 0.0 0:00.00 kworker/u:3 [0;10m[39;49m [0;10m 44 root 20 0 0 0 0 S 0 0.0 0:00.00 kworker/u:4 [0;10m[39;49m [0;10m 45 root 20 0 0 0 0 S 0 0.0 0:00.00 kworker/u:5 [0;10m[39;49m[6;1H[K Sorry about the horrible formatting. Thanks for any suggestions... Edit: I notice that my virtual computer (win7 64 on virtualbox) continues to respond most of the time during these 'freezes' Edit2: I suspect this is something to do with UI priority being too low... but I don't know enough about linux to know how to address that.

    Read the article

  • Using Native Drag and Drop in HTML 5 pages

    - by nikolaosk
    This is going to be the eighth post in a series of posts regarding HTML 5. You can find the other posts here, here , here , here, here , here and here. In this post I will show you how to implement Drag and Drop functionality in an HTML 5 page using JQuery.This is a great functionality and we do not need to resort anymore to plugins like Silverlight and Flash to achieve this great feature. This is also called a native approach on Drag and Drop.I will use some events and I will write code to respond when these events are fired.As I said earlier we need to write Javascript to implement the drag and drop functionality. I will use the very popular JQuery Library. Please download the library (minified version) from http://jquery.com/downloadI will create a simple HTML page.There will be two thumbnails pics on it. There will also be the drag and drop area where the user will drag the thumb pics into it and they will resize to their actual size. The HTML markup for the page follows<!doctype html><html lang="en"><head><title>Liverpool Legends Gallery</title><meta charset="utf-8"><link rel="stylesheet" type="text/css" href="style.css"><script type="text/javascript" charset="utf-8" src="jquery-1.8.1.min.js"></script>  <script language="JavaScript" src="drag.js"></script>   </head><body><header><h1>A page dedicated to Liverpool Legends</h1><h2>Drag and Drop the thumb image in the designated area to see the full image</h2></header><div id="main"><img src="thumbs/steven-gerrard.jpg"  big="large-images/steven-gerrard-large.jpg" alt="John Barnes"><img src="thumbs/robbie-fowler.jpg" big="large-images/robbie-fowler-large.jpg" alt="Ian Rush"><div id="drag"><p>Drop your image here</p> </div></body></html> There is nothing difficult or fancy in the HTML markup above. I have a link to the external JQuery library and another javascript file that I will implement the whole drag and drop functionality.The code for the css file (style.css) follows#main{  float: left;  width: 340px;  margin-right: 30px;}#drag{  float: left;  width: 400px;  height:300px;  background-color: #c0c0c0;}These are simple CSS rules. This post cannot be a tutorial on CSS.For all these posts I assume that you have the basic HTML,CSS,Javascript skills.Now I am going to create a javascript file (drag.js) to implement the drag and drop functionality.I will provide the whole code for the drag.js file and then I will explain what I am doing in each step.$(function() {          var players = $('#main img');          players.attr('draggable', 'true');                    players.bind('dragstart', function(event) {              var data = event.originalEvent.dataTransfer;               var src = $(this).attr("big");              data.setData("Text", src);               return true;          });          var target = $('#drag');          target.bind('drop', function(event) {            var data = event.originalEvent.dataTransfer;            var src = ( data.getData('Text') );                         var img = $("<img></img>").attr("src", src);            $(this).html(img);            if (event.preventDefault) event.preventDefault();            return(false);          });                   target.bind('dragover', function(event) {                if (event.preventDefault) event.preventDefault();            return false;          });           players.bind('dragend', function(event) {             if (event.preventDefault) event.preventDefault();             return false;           });        });   In these lines var players = $('#main img'); players.attr('draggable', 'true');We grab all the images in the #main div and store them in a variable and then make them draggable.Then in following lines I am using the dragstart event.  players.bind('dragstart', function(event) {              var data = event.originalEvent.dataTransfer;               var src = $(this).attr("big");              data.setData("Text", src);               return true;          }); In this event I am associating the custom data attribute value with the item I am dragging.Then I create a variable to get hold of the dropping area var target = $('#drag'); Then in the following lines I implement the drop event and what happens when the user drops the image in the designated area on the page. target.bind('drop', function(event) {            var data = event.originalEvent.dataTransfer;            var src = ( data.getData('Text') );                         var img = $("<img></img>").attr("src", src);            $(this).html(img);            if (event.preventDefault) event.preventDefault();            return(false);          }); The dragend  event is fired when the user has finished the drag operation        players.bind('dragend', function(event) {             if (event.preventDefault) event.preventDefault();             return false;           }); When this method event.preventDefault() is called , the default action of the event will not be triggered.Please have a look a the picture below to see how the page looks before the drag and drop takes place. Then simply I drag and drop a picture in the dropping area.Have a look at the picture below It works!!! Hope it helps!!  

    Read the article

  • CodePlex Daily Summary for Sunday, October 07, 2012

    CodePlex Daily Summary for Sunday, October 07, 2012Popular ReleasesJson.NET: Json.NET 4.5 Release 10: New feature - Added Portable build to NuGet package New feature - Added GetValue and TryGetValue with StringComparison to JObject Change - Improved duplicate object reference id error message Fix - Fixed error when comparing empty JObjects Fix - Fixed SecAnnotate warnings Fix - Fixed error when comparing DateTime JValue with a DateTimeOffset JValue Fix - Fixed serializer sometimes not using DateParseHandling setting Fix - Fixed error in JsonWriter.WriteToken when writing a DateT...Readable Passphrase Generator: KeePass Plugin 0.7.2: Changes: Tested against KeePass 2.20.1 Tested under Ubuntu 12.10 (and KeePass 2.20) Added GenerateAsUtf8 method returning the encrypted passphrase as a UTF8 byte array.VidCoder: 1.4.2 Beta: Added Modulus dropdown to Loose anamorphic choice. Fixed a problem where the incorrect scaling would be chosen and pick the wrong aspect ratio. Fixed issue where old window objects would stick around and continue to respond to property change events We now clear locked width/height values when switching to loose or strict anamorphic. Fixed problems with Custom Anamorphic and display width specification. Fixed text in number box incorrectly being shown in gray in some circumstances.patterns & practices: Prism: Prism for .NET 4.5: This is a release does not include any functionality changes over Prism 4.1 Desktop. These assemblies target .NET 4.5. These assemblies also were compiled against updated dependencies: Unity 3.0 and Common Service Locator (Portable Class Library).Configuration Manager 2012 Automation: Beta Code (v0.1): Beta codeWinRT XAML Toolkit: WinRT XAML Toolkit - 1.3.2: WinRT XAML Toolkit based on the Windows 8 RTM SDK. Download the latest source from the SOURCE CODE page. For compiled version use NuGet. You can add it to your project in Visual Studio by going to View/Other Windows/Package Manager Console and entering: PM> Install-Package winrtxamltoolkit Features AsyncUI extensions Controls and control extensions Converters Debugging helpers Imaging IO helpers VisualTree helpers Samples Recent changes NOTE: Namespace changes DebugConsol...Snoop, the WPF Spy Utility: Snoop 2.8.0: Snoop 2.8.0Announcing Snoop 2.8.0! It's been exactly six months since the last release, and this one has a bunch of goodies in it. In particular, there is now a PowerShell scripting tab, compliments of Bailey Ling. With this tab, the possibilities are limitless. It basically lets you automate/script the application that you are Snooping. Bailey has a couple blog posts (one and two) on his tab already, and I am sure more is to come. Please note that if you do not have PowerShell installed, y....NET Micro Framework: .NET MF 4.3 (Beta): This is the 4.3 Beta version of the .NET Micro Framework. Feature List for v4.3 Support for Visual Studio 2012 (including the Windows Desktop Express version) All v4.2 QFEs features and bug fixes (PWM enhancements, lwIP and network driver reliability improvements, Analog Output, WinUSB and latest GCC support) Improved diagnostic information for deployment Decreased boot time Bug fixes Work Item 1736 - Create link for MFDeploy under start menu Work Item 1504 - Customizing lwIP o...MCEBuddy 2.x: MCEBuddy 2.3.1: 2.3.1All new Remote Client Server architecture. Reccomended Download. The Remote Client Installation is OPTIONAL, you can extract the files from the zip archive into a local folder and run MCEBuddy.GUI directly. 2.2.15 was the last standalone release. Changelog for 2.3.1 (32bit and 64bit) 1. All remote MCEBuddy Client Server architecture (GUI runs remotely/independently from engine now) 2. Fixed bug in Audio Offset 3. Added support for remote MediaInfo (right click on file in queue to get ...D3 Loot Tracker: 1.5: Support for session upload to website. Support for theme change through general settings. Time played counter will now also display a count for days. Tome of secrets are no longer logged as items.NTCPMSG: V1.2.0.0: Allocate an identify cableid for each single connection cable. * Server can asend to specified cableid directly.Team Foundation Server Word Add-in: Version 1.0.12.0622: Welcome to the Visual Studio Team Foundation Server Word Add-in Supported Environments Microsoft Office Word 2007 and 2010 X86 (32-bit) Team Foundation Server 2010 Object Model TFS 2010, 2012 and TFS Service supported, using TFS OM / Explorer 2010. Quality-Bar Details Tool has been reviewed by Visual Studio ALM Rangers Tool has been through an independent technical and quality review All critical bugs have been resolved Known Issues / Bugs WI#43553 - The Acceptance criteria is not pu...RMDdownloader: Test Release: RMDdownloader is a tiny application designed to locate and download the the desktops submitted by the http://ratemydesktop.org userbase. It providers a search string function and other options. RMDdownloader also allows you to automatically set the downloaded images as desktop wallpapers and adjust the windows aero theme accordingly. Upcoming features - The ability to upload your current desktop screenshot on http://ratemydesktop.org - Detection of skins/themes used in user submitted deskt...Viva Music Player: Viva Music Player v0.6.7: Initial release.Korean String Extension for .NET: ?? ??? ??? ????(v0.2.3.0): ? ?? ?? ?? ???? - string.KExtract() ?? ???? - string.AppendJosa(...) AppendJosa(...)? ?? ???? KAppendJosa(...)? ??? ?????UMD????? - PC?: UMDEditor?????V2.7: ??:http://jianyun.org/archives/948.html =============================================================================== UMD??? ???? =============================================================================== 2.7.0 (2012-10-3) ???????“UMD???.exe”??“UMDEditor.exe” ?????????;????????,??????。??????,????! ??64????,??????????????bug ?????????????,???? ???????????????? ???????????????,??????????bug ------------------------------------------------------- ?? reg.bat ????????????。 ????,??????txt/u...Untangler: Untangler 1.0.0: Add a missing file from first releaseDirectX Tool Kit: October 2012: October 2, 2012 Added ScreenGrab module Added CreateGeoSphere for drawing a geodesic sphere Put DDSTextureLoader and WICTextureLoader into the DirectX C++ namespace Renamed project files for better naming consistency Updated WICTextureLoader for Windows 8 96bpp floating-point formats Win32 desktop projects updated to use Windows Vista (0x0600) rather than Windows 7 (0x0601) APIs Tweaked SpriteBatch.cpp to workaround ARM NEON compiler codegen bugCRM 2011 Visual Ribbon Editor: Visual Ribbon Editor (1.3.1002.3): Visual Ribbon Editor 1.3.1002.3 What's New: Multi-language support for Labels/Tooltips for custom buttons and groups Support for base language other than English (1033) Connect dialog will not require organization name for ADFS / IFD connections Automatic creation of missing labels for all provisioned languages Minor connection issues fixed Notes: Before saving the ribbon to CRM server, editor will check Ribbon XML for any missing <Title> elements inside existing <LocLabel> elements...SubExtractor: Release 1029: Feature: Added option to make i and ¡ characters movie-specific for improved OCR on Spanish subs (Special Characters tab in Options) Feature: Allow switch to Word Spacing dialog directly from Spell Check dialog Fix: Added more default word spacings for accented characters Fix: Changed Word Spacing dialog to show all OCR'd characters in current sub Fix: Removed application focus grab during OCR Fix: Tightened HD subs fuzzy logic to reduce false matches in small characters Fix: Improved Arrow k...New ProjectsAptech.eProject.Batch59B - Online Bus Ticket Reseveration System: This is an eProject of SOFTECH - APTECHAptech.eProject.Batch59B - Online Floral Delivery: This is an ePorject of SOFTECH - APTECHDeploy File Generator: Deploy File Generator demonstrates an automated method for importing files into a Visual Studio project in such a way that they can be easily deployed.DNX - Dot Net eXtensions: Collections of extensions to add functionalities at the .NET Framework.EFMock: Database in-memory simulator around Entity Framework for unit test purposeEnergy Communications Solution: A networked grid, with advanced analytics, that consolidates data into an intelligent, instrumented and interconnected single platform for actionable insight.Essential Code: PL: Niezbedny kod EN: Essential CodeExtended WPF File Previewer Control: A WPF user control that implements extended file previewing. The project includes source for the control as well as for a "demo" project.IndieDateTime: IndieDateTime is a simple and easy to use wrapper around .NetFramework DateTime class that has it's own timer which is interdependent from user system. Being inJDynamic: JDynamic : a tools transfer json to .NET Dynamic OjbectKineticJS Type interface for TypeScript: This project provides a type inteface for the http://www.kineticjs.com/ library: kinetic.d.ts. OleExcel: This is to learn OLE for ExcelPortable IoC: Portable IOC is a tiny thread-safe Inversion of Control container that is portable between Windows Phone, Windows Store (Windows 8), Silverlight, and .NET apps.SpeedPOS: Solucion rapida y sencilla para PyMES que necesitan implementar puntos de venta.UnknownApplication: TESTTESTTESTTESTTESTTESTTESTTESTTESTTESTTESTTESTTESTTESTTESTTESTTESTTESTTESTTESTTESTTESTTESTTESTTESTTESTTESTTESTTESTTESTTESTTESTTESTTESTTESTTESTTESTTESTTESTTESTUrl 2 Embed library: Url 2 Embed library, It's a library to convert URLs pages into embeddable content (Videos).WFLite: ??Asp.net WebPages 2?????????? 。

    Read the article

  • Software development is (mostly) a trade, and what to do about it

    - by Jeff
    (This is another cross-post from my personal blog. I don’t even remember when I first started to write it, but I feel like my opinion is well enough baked to share.) I've been sitting on this for a long time, particularly as my opinion has changed dramatically over the last few years. That I've encountered more crappy code than maintainable, quality code in my career as a software developer only reinforces what I'm about to say. Software development is just a trade for most, and not a huge academic endeavor. For those of you with computer science degrees readying your pitchforks and collecting your algorithm interview questions, let me explain. This is not an assault on your way of life, and if you've been around, you know I'm right about the quality problem. You also know the HR problem is very real, or we wouldn't be paying top dollar for mediocre developers and importing people from all over the world to fill the jobs we can't fill. I'm going to try and outline what I see as some of the problems, and hopefully offer my views on how to address them. The recruiting problem I think a lot of companies are doing it wrong. Over the years, I've had two kinds of interview experiences. The first, and right, kind of experience involves talking about real life achievements, followed by some variation on white boarding in pseudo-code, drafting some basic system architecture, or even sitting down at a comprooder and pecking out some basic code to tackle a real problem. I can honestly say that I've had a job offer for every interview like this, save for one, because the task was to debug something and they didn't like me asking where to look ("everyone else in the company died in a plane crash"). The other interview experience, the wrong one, involves the classic torture test designed to make the candidate feel stupid and do things they never have, and never will do in their job. First they will question you about obscure academic material you've never seen, or don't care to remember. Then they'll ask you to white board some ridiculous algorithm involving prime numbers or some kind of string manipulation no one would ever do. In fact, if you had to do something like this, you'd Google for a solution instead of waste time on a solved problem. Some will tell you that the academic gauntlet interview is useful to see how people respond to pressure, how they engage in complex logic, etc. That might be true, unless of course you have someone who brushed up on the solutions to the silly puzzles, and they're playing you. But here's the real reason why the second experience is wrong: You're evaluating for things that aren't the job. These might have been useful tactics when you had to hire people to write machine language or C++, but in a world dominated by managed code in C#, or Java, people aren't managing memory or trying to be smarter than the compilers. They're using well known design patterns and techniques to deliver software. More to the point, these puzzle gauntlets don't evaluate things that really matter. They don't get into code design, issues of loose coupling and testability, knowledge of the basics around HTTP, or anything else that relates to building supportable and maintainable software. The first situation, involving real life problems, gives you an immediate idea of how the candidate will work out. One of my favorite experiences as an interviewee was with a guy who literally brought his work from that day and asked me how to deal with his problem. I had to demonstrate how I would design a class, make sure the unit testing coverage was solid, etc. I worked at that company for two years. So stop looking for algorithm puzzle crunchers, because a guy who can crush a Fibonacci sequence might also be a guy who writes a class with 5,000 lines of untestable code. Fashion your interview process on ways to reveal a developer who can write supportable and maintainable code. I would even go so far as to let them use the Google. If they want to cut-and-paste code, pass on them, but if they're looking for context or straight class references, hire them, because they're going to be life-long learners. The contractor problem I doubt anyone has ever worked in a place where contractors weren't used. The use of contractors seems like an obvious way to control costs. You can hire someone for just as long as you need them and then let them go. You can even give them the work that no one else wants to do. In practice, most places I've worked have retained and budgeted for the contractor year-round, meaning that the $90+ per hour they're paying (of which half goes to the person) would have been better spent on a full-time person with a $100k salary and benefits. But it's not even the cost that is an issue. It's the quality of work delivered. The accountability of a contractor is totally transient. They only need to deliver for as long as you keep them around, and chances are they'll never again touch the code. There's no incentive for them to get things right, there's little incentive to understand your system or learn anything. At the risk of making an unfair generalization, craftsmanship doesn't matter to most contractors. The education problem I don't know what they teach in college CS courses. I've believed for most of my adult life that a college degree was an essential part of being successful. Of course I would hold that bias, since I did it, and have the paper to show for it in a box somewhere in the basement. My first clue that maybe this wasn't a fully qualified opinion comes from the fact that I double-majored in journalism and radio/TV, not computer science. Eventually I worked with people who skipped college entirely, many of them at Microsoft. Then I worked with people who had a masters degree who sucked at writing code, next to the high school diploma types that rock it every day. I still think there's a lot to be said for the social development of someone who has the on-campus experience, but for software developers, college might not matter. As I mentioned before, most of us are not writing compilers, and we never will. It's actually surprising to find how many people are self-taught in the art of software development, and that should reveal some interesting truths about how we learn. The first truth is that we learn largely out of necessity. There's something that we want to achieve, so we do what I call just-in-time learning to meet those goals. We acquire knowledge when we need it. So what about the gaps in our knowledge? That's where the most valuable education occurs, via our mentors. They're the people we work next to and the people who write blogs. They are critical to our professional development. They don't need to be an encyclopedia of jargon, but they understand the craft. Even at this stage of my career, I probably can't tell you what SOLID stands for, but you can bet that I practice the principles behind that acronym every day. That comes from experience, augmented by my peers. I'm hell bent on passing that experience to others. Process issues If you're a manager type and don't do much in the way of writing code these days (shame on you for not messing around at least), then your job is to isolate your tradespeople from nonsense, while bringing your business into the realm of modern software development. That doesn't mean you slap up a white board with sticky notes and start calling yourself agile, it means getting all of your stakeholders to understand that frequent delivery of quality software is the best way to deal with change and evolving expectations. It also means that you have to play technical overlord to make sure the education and quality issues are dealt with. That's why I make the crack about sticky notes, because without the right technique being practiced among your code monkeys, you're just a guy with sticky notes. You're asking your business to accept frequent and iterative delivery, now make sure that the folks writing the code can handle the same thing. This means unit testing, the right instrumentation, integration tests, automated builds and deployments... all of the stuff that makes it easy to see when change breaks stuff. The prognosis I strongly believe that education is the most important part of what we do. I'm encouraged by things like The Starter League, and it's the kind of thing I'd love to see more of. I would go as far as to say I'd love to start something like this internally at an existing company. Most of all though, I can't emphasize enough how important it is that we mentor each other and share our knowledge. If you have people on your staff who don't want to learn, fire them. Seriously, get rid of them. A few months working with someone really good, who understands the craftsmanship required to build supportable and maintainable code, will change that person forever and increase their value immeasurably.

    Read the article

  • CodePlex Daily Summary for Thursday, October 17, 2013

    CodePlex Daily Summary for Thursday, October 17, 2013Popular ReleasesSocial Network Importer for NodeXL: SocialNetImporter(v.1.9): This new version includes: - Download latest status update and use it as vertex tooltip - Limit the timelines to parse to me, my friends or both - Fixed some reported bugs about the fan page and group importer - Fixed the login bug reported latelyDotNetNuke® Wiki: 05.00.00: Changes made to better support upgrades and the removal of deprecated legacy files that were causing formatting issues. Updated the Version number to better indicate the significance of the C# migration and the new DNN 7.0.2 minimum requirement.TerrariViewer: TerrariViewer v7.1 [Terraria Inventory Editor]: You can now backspace in number fields Items added in 1.2.0.3 no longer corrupt player files Buff durations capped at 9999999 Item stacks capped at 9999999 Version info added Prefix IDs corrected Shoe and Eye color box are now properly clickable Moved Bank and Safe into their own tab Users will now be notified of new updatesPython Tools for Visual Studio: 2.0: PTVS 2.0 We’re pleased to announce the release of Python Tools for Visual Studio 2.0 RTM. Python Tools for Visual Studio (PTVS) is an open-source plug-in for Visual Studio which supports programming with the Python language. PTVS supports a broad range of features including CPython/IronPython, Edit/Intellisense/Debug/Profile, Cloud, IPython, and cross platform and cross language debugging support. QUICK VIDEO OVERVIEW For a quick overview of the general IDE experience, please watch this v...C# Intellisense for Notepad++: Release v.1.0.8.2: Solved scrolling problem after DocumentFormatting Implemented "format as you type" --- To avoid the DLLs getting locked by OS use MSI file for the installation.CS-Script for Notepad++ (C# intellisense and code execution): Release v1.0.8.2: Solved scrolling problem after DocumentFormatting Implemented "format as you type" --- To avoid the DLLs getting locked by OS use MSI file for the installation.Collection Commander for Configuration Manager 2012: CMCollCtr 1.0.0: Change log: - MSI Setup - UI Improved - CM12 Console integration - New Powershell code snippets - Client Center IntegrationLINQ to Twitter: LINQ to Twitter v2.1.09: Supports .NET 3.5, .NET 4.0, .NET 4.5, Silverlight 4.0, Windows Phone 7.1, Windows Phone 8, Client Profile, Windows 8, and Windows Azure. 100% Twitter API coverage. Also supports Twitter API v1.1! Also on NuGet.Sandcastle Help File Builder: SHFB v1.9.8.0 with Visual Studio Package: General InformationIMPORTANT: On some systems, the content of the ZIP file is blocked and the installer may fail to run. Before extracting it, right click on the ZIP file, select Properties, and click on the Unblock button if it is present in the lower right corner of the General tab in the properties dialog. This new release contains bug fixes and feature enhancements. There are some potential breaking changes in this release as some features of the Help File Builder have been moved into...C++ REST SDK (codename "Casablanca"): C++ REST SDK 1.3.0: This release fixes multiple customer reported issues as well as the following: Full support for Dev12 binaries and project files Full support for Windows XP New sample highlighting the Client and Server APIs : BlackJack Expose underlying native handle to set custom options on http_client Improvements to Listener Library Note: Dev10 binaries have been dropped as of this release, however the Dev10 project files are still available in the Source CodeAD ACL Scanner: 1.3.2: Minor bug fixed: Powershell 4.0 will report: Select—Object: Parameter cannot be processed because the parameter name p is ambiguous.Json.NET: Json.NET 5.0 Release 7: New feature - Added support for Immutable Collections New feature - Added WriteData and ReadData settings to DataExtensionAttribute New feature - Added reference and type name handling support to extension data New feature - Added default value and required support to constructor deserialization Change - Extension data is now written when serializing Fix - Added missing casts to JToken Fix - Fixed parsing large floating point numbers Fix - Fixed not parsing some ISO date ...Fast YouTube Downloader: YouTube Downloader 2.2.0: YouTube Downloader 2.2.0VidCoder: 1.5.8 Beta: Added hardware acceleration options: Bicubic OpenCL scaling algorithm, QSV decoding/encoding and DXVA decoding. Updated HandBrake core to SVN 5834. Updated VidCoder setup icon. Fixed crash when choosing the mp4v2 container on x86 and opening on x64. Warning: the hardware acceleration features require specific hardware or file types to work correctly: QSV: Need an Intel processor that supports Quick Sync Video encoding, with a monitor hooked up to the Intel HD Graphics output and the lat...ASP.net MVC Awesome - jQuery Ajax Helpers: 3.5.2: version 3.5.2 - fix for setting single value to multivalue controls - datepicker min max date offset fix - html encoding for keys fix - enable Column.ClientFormatFunc to be a function call that will return a function version 3.5.1 - fixed html attributes rendering - fixed loading animation rendering - css improvements version 3.5 ========================== - autosize for all popups ( can be turned off by calling in js awe.autoSize = false ) - added Parent, Paremeter extensions ...Wsus Package Publisher: Release v1.3.1310.12: Allow the Update Creation Wizard to be set in full screen mode. Fix a bug which prevent WPP to Reset Remote Sus Client ID. Change the behavior of links in the Update Detail Viewer. Left-Click to open, Right-Click to copy to the Clipboard.WDTVHubGen - Adds Metadata, thumbnails and subtitles to WDTV Live Hubs: WDTVHubGen.v2.1.6.maint: I think this covers all of the issues. new additions: fixed the thumbnail problem for backgrounds. general clean up and error checking. need to get this put through the wringer and all feedback is welcome.BIDS Helper: BIDS Helper 1.6.4: This BIDS Helper release brings the following new features and fixes: New Features: A new Bus Matrix style report option when you run the Printer Friendly Dimension Usage report for an SSAS cube. The Biml engine is now fully in sync with the supported subset of Varigence Mist 3.4. This includes a large number of language enhancements, bugfixes, and project deployment support. Fixed Issues: Fixed Biml execution for project connections fixing a bug with Tabular Translations Editor not a...Free language translator and file converter: Free Language Translator 3.4: fixes for new version look up.PowerShell App Deployment Toolkit: PowerShell App Deployment Toolkit v3.0.6: Added PersistPrompt parameter to Show-InstallationWelcome and Show-InstallationPrompt. Prompt window is persistently returned to center screen after interval specified in config file (default 10 seconds). For Show-InstallationWelcome, this only takes effect if deferral is not available to user. The user will have no option but to respond to the prompt - resistance is futile! Added example advanced Office 2010 deployment script Asynchronous actions now write to the same log file as synchro...New ProjectsAdditionPage: This is a simple ASP.NET in VB.NET page that allows users to enter 2 numbers, and display their sum. Arad Enterprise Messaging Proxy: In these situations, the overhead and configuration complexity of an external webserver is seldom worth the trouble. AEMGP Server Implementation base on Socke.Boring Sudoku: Boring Sudoku is Sudoku game, made for SFML-game programming tutorial. Feel free to download the source code to learn more about game programming.Configurator Debug: O Configurator Debug é uma ferramenta que auxilia na depuração das queries da feature do Configurador no Dynamics AX 2009.Fast Query: FastQuery - is a tool to execute MS SQL Queries without SQL Server Management Studio (SSMS). gdrwebapp1: Test ProjectK2 workflow Manifestation d'interet with custom IPF methode: K2 SamplesL Language Interpreter: We are now in dev start stage, when none of the functionality is available, but probably you will be able to see it published. this shoud have tex outputLameXP - Audio Encoder Front-End: LameXP is a graphical user-interface for various of audio encoders: It allows you convert audio files from one format to another one in the most simple way.Learn Node.js: Node.js express jade ...localcompare: localhistory add new featureOpen source WPF PDF Viewer: Open source PDF Viewer based on Apitron PDF Rasterizer for .NET component that performs high-quality conversion from PDF file to an image.Pfz.AnimationManagement: A .NET animation library that supports both declarative and imperative animations, capable of creating from simple animation to entire games.SerieSpotter: .net projectSimpleUnitity: ??????? ??? DataBase, TextLog, CacheSPOnlineDevelopTool(SharePoint ??????): SPOnlineDevelopTool?????????SharePoint WebPart?SharePoint WebPartVoya Media: Voya Media is free, open-source and provides one central place to play and organize all your music, pictures and videos.

    Read the article

  • Introducing Oracle Multitenant

    - by OracleMultitenant
    0 0 1 1142 6510 Oracle Corporation 54 15 7637 14.0 Normal 0 false false false EN-US JA X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman"; mso-fareast-language:JA;} The First Database Designed for the Cloud Today Oracle announced the general availability (GA) of Oracle Database 12c, the first database designed for the Cloud. Oracle Multitenant, new with Oracle Database 12c, is a key component of this – a new architecture for consolidating databases and simplifying operations in the Cloud. With this, the inaugural post in the Multitenant blog, my goal is to start the conversation about Oracle Multitenant. We are very proud of this new architecture, which we view as a major advance for Oracle. Customers, partners and analysts who have had previews are very excited about its capabilities and its flexibility. This high level review of Oracle Multitenant will touch on our design considerations and how we re-architected our database for the cloud. I’ll briefly describe our new multitenant architecture and explain it’s key benefits. Finally I’ll mention some of the major use cases we see for Oracle Multitenant. Industry Trends We always start by talking to our customers about the pressures and challenges they’re facing and what trends they’re seeing in the industry. Some things don’t change. They face the same pressures and the same requirements as ever: Pressure to do more with less; be faster, leaner, cheaper, and deliver services 24/7. Big companies have achieved scale. Now they want to realize economies of scale. As ever, DBAs are faced with the challenges of patching and upgrading large numbers of databases, and provisioning new ones.  Requirements are familiar: Performance, scalability, reliability and high availability are non-negotiable. They need ever more security in this threatening climate. There’s no time to stop and retool with new applications. What’s new are the trends. These are the techniques to use to respond to these pressures within the constraints of the requirements. With the advent of cloud computing and availability of massively powerful servers – even engineered systems such as Exadata – our customers want to consolidate many applications into fewer larger servers. There’s a move to standardized services – even self-service. Consolidation Consolidation is not new; companies have tried various different approaches to consolidation of databases in the cloud. One approach is to partition a powerful server between several virtual machines, one per application. A downside of this is that you have the resource and management overheads of OS and RDBMS per VM – that is, per application. Another is that you have replaced physical sprawl with virtual sprawl and virtual sprawl is still expensive to manage. In the dedicated database model, we have a single physical server supporting multiple databases, one per application. So there’s a shared OS overhead, but RDBMS process and memory overhead are replicated per application. Let's think about our traditional Oracle Database architecture. Every time we create a database, be it a production database, a development or a test database, what do we do? We create a set of files, we allocate a bunch of memory for managing the data, and we kick off a series of background processes. This is replicated for every one of the databases that we create. As more and more databases are fired up, these replicated overheads quickly consume the available server resources and this limits the number of applications we can run on any given server. In Oracle Database 11g and earlier the highest degree of consolidation could be achieved by what we call schema consolidation. In this model we have one big server with one big database. Individual applications are installed in separate schemas or table-owners. Database overheads are shared between all applications, which affords maximum consolidation. The shortcomings are that application changes are often required. There is no tenant isolation. One bad apple can spoil the whole batch. New Architecture & Benefits In Oracle Database 12c, we have a new multitenant architecture, featuring pluggable databases. This delivers all the resource utilization advantages of schema consolidation with none of the downsides. There are two parts to the term “pluggable database”: "pluggable", which is new, and "database", which is familiar.  Before we get to the exciting new stuff let’s discuss what hasn’t changed. A pluggable database is a fully functional Oracle database. It’s not watered down in any way. From the perspective of an application or an end user it hasn’t changed at all. This is very important because it means that no application changes are required to adopt this new architecture. There are many thousands of applications built on Oracle databases and they are all ready to run on Oracle Multitenant. So we have these self-contained pluggable databases (PDBs), and as their name suggests, they are plugged into a multitenant container database (CDB). The CDB behaves as a single database from the operations point of view. Very much as we had with the schema consolidation model, we only have a single set of Oracle background processes and a single, shared database memory requirement. This gives us very high consolidation density, which affords maximum reduction in capital expenses (CapEx). By performing management operations at the CDB level – “managing many as one” – we can achieve great reductions in operating expenses (OpEx) as well, but we retain granular control where appropriate. Furthermore, the “pluggability” capability gives us portability and this adds a tremendous amount of agility. We can simply unplug a PDB from one CDB and plug it into another CDB, for example to move it from one SLA tier to another. I'll explore all these new capabilities in much more detail in a future posting.  Use Cases We can identify a number of use cases for Oracle Multitenant. Here are a few of the major ones. 0 0 1 113 650 Oracle Corporation 5 1 762 14.0 Normal 0 false false false EN-US JA X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman"; mso-fareast-language:JA;} Development / Testing where individual engineers need rapid provisioning and recycling of private copies of a few "master test databases" Consolidation of disparate applications using fewer, more powerful servers Software as a Service deploying separate copies of identical applications to individual tenants Database as a Service typically self-service provisioning of databases on the private cloud Application Distribution from ISV / Installation by Customer Eliminating many typical installation steps (create schema, import seed data, import application code PL/SQL…) - just plug in a PDB! High volume data distribution literally via disk drives in envelopes distributed by truck! - distribution of things like GIS or MDM master databases …various others! Benefits Previous approaches to consolidation have involved a trade-off between reductions in Capital Expenses (CapEx) and Operating Expenses (OpEx), and they’ve usually come at the expense of agility. With Oracle Multitenant you can have your cake and eat it: Minimize CapEx More Applications per server Minimize OpEx Manage many as one Standardized procedures and services Rapid provisioning Maximize Agility Cloning for development and testing Portability through pluggability Scalability with RAC Ease of Adoption Applications run unchanged It’s a pure deployment choice. Neither the database backend nor the application needs to be changed. In future postings I’ll explore various aspects in more detail. However, if you feel compelled to devour everything you can about Oracle Multitenant this very minute, have no fear. Visit the Multitenant page on OTN and explore the various resources we have available there. Among these, Oracle Distinguished Product Manager Bryn Llewellyn has written an excellent, thorough, and exhaustively detailed White Paper about Oracle Multitenant, which is available here.  Follow me  I tweet @OraclePDB #OracleMultitenant

    Read the article

  • CodePlex Daily Summary for Thursday, June 05, 2014

    CodePlex Daily Summary for Thursday, June 05, 2014Popular Releases51Degrees - Device Detection and Redirection: 3.1.2.3: Version 3.1 HighlightsDevice detection algorithm is over 100 times faster. Regular expressions and levenshtein distance calculations are no longer used. The device detection algorithm performance is no longer limited by the number of device combinations contained in the dataset. Two modes of operation are available: Memory – the detection data set is loaded into memory and there is no continuous connection to the source data file. Slower initialisation time but faster detection performanc...CS-Script for Notepad++ (C# intellisense and code execution): Release v1.0.27.0: CodeMap now indicates the type name for all members Implemented running scripts 'as administrator'. Just add '//css_npp asadmin' to the script and run it as usual. 'Prepare script for distribution' now aggregates script dependency assemblies. Various improvements in CodeSnipptet, Autcompletion and MethodInfo interactions with each other. Added printing line number for the entries in CodeMap (subject of configuration value) Improved debugging step indication for classless scripts ...Load Runner - HTTP Pressure Test Tool: Load Runner 1.1: 1. added support for measuring total in time / hits / traffic / requests 2. abstracted log, default log to console / text file 3. refactored codeKartris E-commerce: Kartris v2.6003: Bug fixes: Fixed issue where category could not be saved if parent categories not altered Updated split string function to 500 chars otherwise problems with attribute filtering in PowerPack Improvements: If a user has group pricing below that available through qty discounts, that will show in place of the qty discountMagicaVoxel: MagicaVoxel Renderer ver 0.01: MagicaVoxel Renderer (Win 0.01)ClosedXML - The easy way to OpenXML: ClosedXML 0.72.3: 70426e13c415 ClosedXML for .Net 4.0 now uses Open XML SDK 2.5 b9ef53a6654f Merge branch 'master' of https://git01.codeplex.com/forks/vbjay/closedxml 727714e86416 Fix range.Merge(Boolean) for .Net 3.5 eb1ed478e50e Make public range.Merge(Boolean checkIntersects) 6284cf3c3991 More performance improvements when saving.MCE Controller: MCE Controller V1.8.6: BETA. Adds option to disable all internal commands. If the "Disable Internal Commands" checkbox in settings is checked, MCE Controller will disable all internally defined commands (e.g. VK key codes, single characters, mouse commands, etc...) and only respond to commands defined in the MCEControl.commmands file. Attempts to fix inability for clients to reconnect after they forcibly close the connection. Build 1.8.6.37445Visual F# Tools: Daily Builds Preview 06-04-2014: This preview is released for use under a proprietary license.SEToolbox: SEToolbox 01.032.018 Release 1: Added ability to merge/join two ships, regardless of origin. Added Language selection menu to set display text language (for SE resources only), and fixed inherent issues. Added full support for Dedicated Servers, allowing use on PC without Steam present, and only the Dedicated Server install. Added Browse button for used specified save game selection in Load dialog. Installation of this version will replace older version.Service monitor: Version 3.1: Added the ability of the tool to restart itself in 'Admin' mode without UAC prompt. Note that this only works after the tool has run in 'Admin' mode at least once before. This is only supported on Vista, Windows 7 or later. See my blog post on how it is done.DNN Blog: 06.00.07: Highlights: Enhancement: Option to show management panel on child modules Fix: Changed SPROC and code to ensure the right people are notified of pending comments. (CP-24018) Fix: Fix to have notification actions authentication assume the right module id so these will work from the messaging center (CP-24019) Fix: Fix to issue in categories in a post that will not save when no categories and no tags selectedTEncoder: 4.0.0: --4.0.0 -Added: Video downloader -Added: Total progress will be updated more smoothly -Added: MP4Box progress will be shown -Added: A tool to create gif image from video -Added: An option to disable trimming -Added: Audio track option won't be used for mpeg sources as default -Fixed: Subtitle position wasn't used -Fixed: Duration info in the file list wasn't updated after trimming -Updated: FFMpegQuickMon: Version 3.14 (Pie release): This is unofficially the 'Pie' release. There are two big changes.1. 'Presets' - basically templates. Future releases might build on this to allow users to add more presets. 2. MSI Installer now allows you to choose components (in case you don't want all collectors etc.). This means you don't have to download separate components anymore (AllAgents.zip still included in case you want to use them separately) Some other changes:1. Add/changed default file extension for monitor packs to *.qmp (...VeraCrypt: VeraCrypt version 1.0d: Changes between 1.0c and 1.0d (03 June 2014) : Correct issue while creating hidden operating system. Minor fixes (look at git history for more details).Keepass2Android: 0.9.4-pre1: added plug-in support: See settings for how to get plug-ins! published QR plug-in (scan passwords, display passwords as QR code, transfer entries to other KP2A devices) published InputStick plugin (transfer credentials to your PC via bluetooth - requires InputStick USB stick) Third party apps can now simply implement querying KP2A for credentials. Are you a developer? Please add this to your app if suitable! added TOTP support (compatible with KeeOTP and TrayTotp) app should no l...Microsoft Web Protection Library: AntiXss Library 4.3.0: Download from nuget or the Microsoft Download Center This issue finally addresses the over zealous behaviour of the HTML Sanitizer which should now function as expected once again. HTML encoding has been changed to safelist a few more characters for webforms compatibility. This will be the last version of AntiXSS that contains a sanitizer. Any new releases will be encoding libraries only. We recommend you explore other sanitizer options, for example AntiSamy https://www.owasp.org/index....Z SqlBulkCopy Extensions: SqlBulkCopy Extensions 1.0.0: SqlBulkCopy Extensions provide MUST-HAVE methods with outstanding performance missing from the SqlBulkCopy class like Delete, Update, Merge, Upsert. Compatible with .NET 2.0, SQL Server 2000, SQL Azure and more! Bulk MethodsBulkDelete BulkInsert BulkMerge BulkUpdate BulkUpsert Utility MethodsGetSqlConnection GetSqlTransaction You like this library? Find out how and why you should support Z Project Become a Memberhttp://zzzproject.com/resources/images/all/become-a-member.png|ht...Tweetinvi a friendly Twitter C# API: Tweetinvi 0.9.3.x: Timelines- Added all the parameters available from the Timeline Endpoints in Tweetinvi. - This is available for HomeTimeline, UserTimeline, MentionsTimeline // Simple query var tweets = Timeline.GetHomeTimeline(); // Create a parameter for queries with specific parameters var timelineParameter = Timeline.CreateHomeTimelineRequestParameter(); timelineParameter.ExcludeReplies = true; timelineParameter.TrimUser = true; var tweets = Timeline.GetHomeTimeline(timelineParameter); Tweetinvi 0.9.3.1...Sandcastle Help File Builder: Help File Builder and Tools v2014.5.31.0: General InformationIMPORTANT: On some systems, the content of the ZIP file is blocked and the installer may fail to run. Before extracting it, right click on the ZIP file, select Properties, and click on the Unblock button if it is present in the lower right corner of the General tab in the properties dialog. This release completes removal of the branding transformations and implements the new VS2013 presentation style that utilizes the new lightweight website format. Several breaking cha...Magick.NET: Magick.NET 6.8.9.101: Magick.NET linked with ImageMagick 6.8.9.1. Breaking changes: - Int/short Set methods of WritablePixelCollection are now unsigned. - The Q16 build no longer uses HDRI, switch to the new Q16-HDRI build if you need HDRI.New Projects12306helper: 12306 ????2112110044: dasda2112110202: asdfsdfsdfsd2112110298: TieuDan2112110315: vftgcdxfrBaidu PCS: BaiduPCSExcel2Sobek: Here the project Excel2Sobek is hosted. Excel2Sobek is a preprocessor in Excel's VBA for the SOBEK 2 hydrological and hydraulic simulation model by Deltares.Help Desk Pro: Manage a business of customer serviceMARGYE: MARGYE CMS CMR E-CommerceMemberBS: MemberBS20140605MiKroTik API: Api untuk menghubungkan aplikasi anda dengan router Mikrotik.MiniProfiler + Log4Net: Use MiniProfiler and Log4Net in ASP.NET projectStore Apps Unity App Base for Prism: This simple library provides an Application Base for a Windows Store application that automatically connects Unity to provide injection as the container.SuperCaptcha for MVC: Custom captcha control for MVCTC760240: myappwithfailuresWindows Phone 8 Dilbert Comic Reader: Basic WP8.1 app that displays comics from http://www.dilbert.com.x86 Proved: Prove what you run!

    Read the article

  • LINQ to Twitter Maintenance Feedback

    - by Joe Mayo
    Originally posted on: http://geekswithblogs.net/WinAZ/archive/2013/06/16/linq-to-twitter-maintenance-feedback.aspxIt’s always fun to receive positive feedback on your work. If you receive a sufficient amount of positive feedback, you know you’re doing something right. Sometimes, people provide negative feedback too. There are a couple ways to handle it: come back fighting or engage for clarification. The way you handle the negative feedback depends on what your goals are. Feedback Approaches If you know the feedback is incorrect and you need to promote your idea or product, you might want to come back fighting. The feedback might just be comments by a troll or competitor wanting to spread FUD. However, this could be the totally wrong approach if you misjudge the source and intentions of the feedback. In a lot of cases, feedback is a golden opportunity. Sometimes, a problem exists that you either don’t know about or don’t realize the true impact of the problem. If you decide to come back fighting, you might loose the opportunity to learn something new. However, if you engage the person providing the feedback, looking for clarification, you might learn something very important. Negative feedback and it’s clarification can lead to the collection of useful and actionable data. In my case, something that prompted this blog post, I noticed someone who tweeted a negative comment about LINQ to Twitter. Normally, any less than stellar comments are usually from folks that need help – so I help if I can. This was different. I was like “Don’t use LINQ to Twitter”. This is an open source project, the comment didn’t come from a competing project, and  sounded more like an expression of frustration. So I engaged. Not only did the person respond, but I got some decent quality feedback. What’s also interesting is a couple other side conversations sprouted on the subject, which gave me more useful data. LINQ to Twitter Thread Actions Essentially, this particular issue centered around maintenance. There are actually several sub-issues at play here: dependencies, error handling, debugging, and visibility. I’ll describe each one and my interpretation. Dependencies Dependencies are where a library has references to other libraries. This means that when you build your application, you need DLLs for the entire dependency graph for your application. There are several potential problems with this that include more libraries for configuration management, potential versioning mismatches, and lack of cross-platform support. In the early days of LINQ to Twitter, I allowed developers to contribute and add dependencies, but it became very problematic (for reasons stated). It was like a ball and chain that kept me from moving forward. So, I refactored and pulled other open-source into my project to eliminate external dependencies. This lets me fix the code in my project without relying on someone else to upgrade or fix their DLL. The motivation for this was from early negative feedback that translated as important data and acted on it. Today, LINQ to Twitter has zero dependencies. Note: Rejecting good code from community members who worked hard to make your project better is a painful experience in itself. I have to point out that any contribution was not in vain because they had a positive influence on my subsequent refactoring that resulted in a better developer experience. Error Handling Error handling has been a problem in the past. I have this combination of supporting both synchronous and asynchronous (APM) processing that can be complex at times. Within the last 6 months, I did a fair amount of refactoring to detect errors and process them properly. I also refactored TwitterQueryException so it includes important data from Twitter. During this refactoring, I’ve made breaking changes that I felt would improve the development experience (small things like renaming a callback property to Exception, rather than Error). I think the async error handling is much better than it was a year ago. For all the work I’ve done, there is more to do. I think that a combination of more error handling support, e.g. improving semantics, and education through documentation and samples will improve the error handling story. Because of what I’ve done so far, it isn’t bad, but I see opportunities for improvement. Debugging Debugging can be painful. Here’s why: you have multiple layers of technology to navigate and figure out where the real problem is – Twitter API, Security, HTTP, LINQ to Twitter, and application. You can probably add your own nuances to that list, but the point is that debugging in this environment can be complex. I think that my plans for error handling will contribute to making the debugging process easier. However, there’s more I can do in the way of documentation and guidance. Some of the questions to be answered revolve around when something goes wrong, how does the developer figure out that there is a problem, what the problem is, and what to do about it. One example that has gone a long way to helping LINQ to Twitter developers is the 401 FAQ. A 401 Unauthorized is the error that the Twitter API returns when a use isn’t able to authenticate and is one of the most difficult problems faced by LINQ to Twitter developers. What I did was read guidance from Twitter and collect techniques from my own development and actions helping other developers to compile an extensive list of reasons for the 401 and ways to fix the problem. At one time, over half of the questions I answered in the forums were to help solve 401 issues. After publishing the 401 FAQ, I rarely get a 401 question and it’s because the person didn’t know about the FAQ. If the person is too lazy to read the FAQ, that’s not my issue, but the results in support issues have been dramatic. I think debugging can benefit from the education and documentation approach, but I’m always open to suggestions on whatever else I can do. Visibility Visibility is a nuance of the error handling/debugging discussion but is deeply rooted in comfort and control. The questions to ask in this area are what is happening as my code runs and how testable is the code. In support of these areas, LINQ to Twitter does have logging and TwitterContext properties that help see what’s happening on requests. The logging functionality allows any developer to connect a TextWriter to the Log property of TwitterContext to see what’s happening. Further, TwitterContext has a Headers property to see the headers Twitter returns and a RawResults property to show the Json string Twitter returns. From a testing perspective, I’ve been able to write hundreds of unit tests, over 600 when this post is published, and growing. If you write your own library, you have full control over all of these aspects. The tradeoff here is that while you have access to the LINQ to Twitter source code and modify it for all the visibility, LINQ to Twitter *will* change (which is good) and you will have to figure out how to merge that with your changes (which is hard). The fact is that this is a limitation of any 3rd party library, not just LINQ to Twitter. So, it’s a design decision where the tradeoff is between control and productivity. That said, there are things I can do with LINQ to Twitter to make the visibility story more compelling. I think there are opportunities to improve diagnostics. This would be a ton of work because it would need to provide multi-level logging that can be tuned for production and support any logging provider you want to attach. I’ve considered approaches such as how the new Semantic Logging application block connects to Windows Error Reporting as a potential target. Whatever I do would need to be extensible without creating native external dependencies. e.g. how many 3rd party libraries force a dependency on a logging framework that you don’t use. So, this won’t be an easy feat, but I believe it can be part of the roadmap. I think that a lot of developers are unaware of existing visibility features, so the first step would be to provide more documentation and guidance. My thought are that this would lead to more feedback that will help improve this area. Summary Recent feedback highlights some of items that are important to LINQ to Twitter developers, such as dependencies, error handling, debugging, and visibility. I know that there are maintenance issues that have been problems for LINQ to Twitter developers in the past. I’ve done a lot of work in this area, such as improving error handling, adding visibility features, and providing extensive API documentation. That said, there is more to be done to make LINQ to Twitter the best Twitter API experience available for .NET developers and I welcome anyone’s thoughts on what I’ve written here or new improvements. @JoeMayo

    Read the article

  • Initializing SD card in SPI issues

    - by Sembazuru
    Sorry for the length of this question, but I thought it best to show as much detail to fend of questions asking if I had done A when I had already done A... ;-) I've had a look at the "micro-SD card initialization using SPI interface" thread and didn't see any answers that matched my issue (i.e. things I haven't already tried). I have a similar issue where I'm trying to access a SD card through a micro-controller's SPI interface (specifically an HC908). I've tried following the flow charts in the Physical Layer Simplified Specification v2.00 and it seems to initialize correctly on Transcend 1GB & 2GB and an AE&C 1GB card. But I'm having problems on 3 other random cards from my stash of old cards that I've used on my camera. My code is all HC908 assembler. I scoped out the SPI clock line and during initialization it's running about 350kHz (the only speed multiplier that the HC908 supplies at my low MCU clock speed that falls within the 100-400kHz window). Here are the results of the three cards that aren't completing my initialization routine (all done consecutively w/o changing any code or timing parameters): Canon 16Meg card (labeled as SD): Set card select high Send 80 SPI clock cycles (done by writing 0xFF 10 times) Set card select low Send CMD0 [0x400000000095] and Loop up to 8 times waiting for high bit on response to go low R1 = 0x01 (indicates idle) Send CMD8 [0x48000001AA87] and Loop up to 8 times waiting for high bit on response to go low R1 = 0x05 (idle and illegal command) Because illegal command set local flag to indicate v1 or MMC card Send CMD58 [0x7A00000000FD] and Loop up to 8 times waiting for high bit on response to go low R1 = 0x05 (idle and illegal command) because illegal command branch to error routine Send CMD13 [0x4D000000000D] (show status buffer) and Loop up to 8 times waiting for high bit on response to go low R1= 0x05 (idle and illegal command) Is the illegal command flag stuck? Should I be doing something after CMD8 to clear that flag? SanDisk UltraII 256Meg Set card select high Send 80 SPI clock cycles (done by writing 0xFF 10 times) Set card select low Send CMD0 [0x400000000095] and Loop up to 8 times waiting for high bit on response to go low R1 = 0x01 (idle) Send CMD8 [0x48000001AA87] and Loop up to 8 times waiting for high bit on response to go low R1 = 0x05 (idle and illegal command) Because illegal command set local flag to indicate v1 or MMC card Send CMD58 [0x7A00000000FD] and Loop up to 8 times waiting for high bit on response to go low R1 = 0x01 (idle) Send 0xFF 4 times to read OCR OCR = 0xFFFFFFFF Send CMD55 [0x770000000065] (1st part of ACMD41) and Loop up to 8 times waiting for high bit on response to go low R1 = 0x01 (idle) Send CMD41 [0x6900000000E5] (2nd part of ACMD41) and Loop up to 8 times waiting for high bit on response to go low R1 = 0x05 (idle and illegal command) Because illegal command, assume card is MMC Send CMD1 [0x4100000000F9] (for MMC) and Loop up to 8 times waiting for high bit on response to go low R1 = 0x05 (idle and illegal command) Repeat the CMD1 50 times (my arbitrary number to wait until idle clears) Every R1 response is 0x05 (idle and illegal command) Why is OCR all F? Doesn't seem proper at all. Also, why does ACMD41 and CMD1 respond illegal command? Is CMD1 failing because the card is waiting for a valid ACMD after the CMD55 even with the illegal command response? SanDisk ExtremeIII 2G: Set card select high Send 80 SPI clock cycles (done by writing 0xFF 10 times) Set card select low Send CMD0 [0x400000000095] and Loop up to 8 times waiting for high bit on response to go low R1 = 0x01 (idle) Send CMD8 [0x40000001AA87] and Loop up to 8 times waiting for high bit on response to go low R1 = 0x7F (??? My loop shows the responses for each iteration and I got 0xFF 0xFF 0xC1 0x7F... is the card getting out of sync?) Send CMD58 [0x7A00000000FD] and Loop up to 8 times waiting for high bit on response to go low R1 = 0x01 (idle and back in sync) Send 0xFF 4 times to read OCR OCR = 0x00FF80 Send CMD55 [0x770000000065] (1st part of ACMD41) and Loop up to 8 times waiting for high bit on response to go low R1 = 0x5F (??? loop responses are 0xFF 0xFF 0xF0 0x5F... again out of sync?) Send CMD41 [0x6900000000E5] (2nd part of ACMD41) and Loop up to 8 times waiting for high bit on response to go low R1 = 0x05 (idle and illegal command, but back in sync???) Because illegal command, assume card is MMC Send CMD1 [0x4100000000F9] (for MMC) and Loop up to 8 times waiting for high bit on response to go low R1 = 0x7F (??? loop responses are 0xFF 0xFF 0xC1 0x7F... again out of sync?) Repeat CMD1 and Loop up to 8 times waiting for high bit on response to go low R1 = 0x01 (idle) Repeat CMD1 and Loop up to 8 times waiting for high bit on response to go low R1 = 0x7F (??? loop responses are 0xFF 0xFF 0xC1 0x7F... again out of sync?) Repeat CMD1 and Loop up to 8 times waiting for high bit on response to go low R1 = 0x00 (out of idle) Send CMD9 [0x4900000000AF] (get CSD) and Loop up to 8 times waiting for high bit on response to go low R1 = 0x3F (??? loop responses are 0xFF 0xFF 0xC1 0x3F... again out of sync?) Code craps out because Illegal command bit is high. WTF is wrong with that card? Sometimes in sync, other times not. (The above pattern is repeatable.) I've scoped this one out and I'm not seeing any rogue clock cycles going through between MOSI/MISO transfers. Anyone have any clues? Need any more info? Thanx in advance for spending the time to read through all of this.

    Read the article

  • Cisco 800 series won't forward port

    - by sam
    Hello ServerFault, I am trying to forward port 444 from my cisco router to my Web Server (192.168.0.2). As far as I can tell, my port forwarding is configured correctly, yet no traffic will pass through on port 444. Here is my config: ! version 12.3 service config no service pad service tcp-keepalives-in service tcp-keepalives-out service timestamps debug uptime service timestamps log uptime service password-encryption no service dhcp ! hostname QUESTMOUNT ! logging buffered 16386 informational logging rate-limit 100 except warnings no logging console no logging monitor enable secret 5 -removed- ! username administrator secret 5 -removed- username manager secret 5 -removed- clock timezone NZST 12 clock summer-time NZDT recurring 1 Sun Oct 2:00 3 Sun Mar 3:00 aaa new-model ! ! aaa authentication login default local aaa authentication login userlist local aaa authentication ppp default local aaa authorization network grouplist local aaa session-id common ip subnet-zero no ip source-route no ip domain lookup ip domain name quest.local ! ! no ip bootp server ip inspect name firewall tcp ip inspect name firewall udp ip inspect name firewall cuseeme ip inspect name firewall h323 ip inspect name firewall rcmd ip inspect name firewall realaudio ip inspect name firewall streamworks ip inspect name firewall vdolive ip inspect name firewall sqlnet ip inspect name firewall tftp ip inspect name firewall ftp ip inspect name firewall icmp ip inspect name firewall sip ip inspect name firewall fragment maximum 256 timeout 1 ip inspect name firewall netshow ip inspect name firewall rtsp ip inspect name firewall skinny ip inspect name firewall http ip audit notify log ip audit po max-events 100 ip audit name intrusion info list 3 action alarm ip audit name intrusion attack list 3 action alarm drop reset no ftp-server write-enable ! ! ! ! crypto isakmp policy 1 authentication pre-share ! crypto isakmp policy 2 encr 3des authentication pre-share group 2 ! crypto isakmp client configuration group staff key 0 qS;,sc:q<skro1^, domain quest.local pool vpnclients acl 106 ! ! crypto ipsec transform-set tr-null-sha esp-null esp-sha-hmac crypto ipsec transform-set tr-des-md5 esp-des esp-md5-hmac crypto ipsec transform-set tr-des-sha esp-des esp-sha-hmac crypto ipsec transform-set tr-3des-sha esp-3des esp-sha-hmac ! crypto dynamic-map vpnusers 1 description Client to Site VPN Users set transform-set tr-des-md5 ! ! crypto map cm-cryptomap client authentication list userlist crypto map cm-cryptomap isakmp authorization list grouplist crypto map cm-cryptomap client configuration address respond crypto map cm-cryptomap 65000 ipsec-isakmp dynamic vpnusers ! ! ! ! interface Ethernet0 ip address 192.168.0.254 255.255.255.0 ip access-group 102 in ip nat inside hold-queue 100 out ! interface ATM0 no ip address no atm ilmi-keepalive dsl operating-mode auto ! interface ATM0.1 point-to-point pvc 0/100 encapsulation aal5mux ppp dialer dialer pool-member 1 ! ! interface Dialer0 bandwidth 640 ip address negotiated ip access-group 101 in no ip redirects no ip unreachables ip nat outside ip inspect firewall out ip audit intrusion in encapsulation ppp no ip route-cache no ip mroute-cache dialer pool 1 dialer-group 1 no cdp enable ppp pap sent-username -removed- password 7 -removed- ppp ipcp dns request crypto map cm-cryptomap ! ip local pool vpnclients 192.168.99.1 192.168.99.254 ip nat inside source list 105 interface Dialer0 overload ip nat inside source static tcp 192.168.0.2 444 interface Dialer0 444 ip nat inside source static tcp 192.168.0.51 9000 interface Dialer0 9000 ip nat inside source static udp 192.168.0.2 1433 interface Dialer0 1433 ip nat inside source static tcp 192.168.0.2 1433 interface Dialer0 1433 ip nat inside source static tcp 192.168.0.2 25 interface Dialer0 25 ip classless ip route 0.0.0.0 0.0.0.0 Dialer0 ip http server no ip http secure-server ! ip access-list logging interval 10 logging 192.168.0.2 access-list 1 remark The local LAN. access-list 1 permit 192.168.0.0 0.0.0.255 access-list 2 permit 192.168.0.0 access-list 2 remark Where management can be done from. access-list 2 permit 192.168.0.0 0.0.0.255 access-list 3 remark Traffic not to check for intrustion detection. access-list 3 deny 192.168.99.0 0.0.0.255 access-list 3 permit any access-list 101 remark Traffic allowed to enter the router from the Internet access-list 101 permit ip 192.168.99.0 0.0.0.255 192.168.0.0 0.0.0.255 access-list 101 deny ip 0.0.0.0 0.255.255.255 any access-list 101 deny ip 10.0.0.0 0.255.255.255 any access-list 101 deny ip 127.0.0.0 0.255.255.255 any access-list 101 deny ip 169.254.0.0 0.0.255.255 any access-list 101 deny ip 172.16.0.0 0.15.255.255 any access-list 101 deny ip 192.0.2.0 0.0.0.255 any access-list 101 deny ip 192.168.0.0 0.0.255.255 any access-list 101 deny ip 198.18.0.0 0.1.255.255 any access-list 101 deny ip 224.0.0.0 0.15.255.255 any access-list 101 deny ip any host 255.255.255.255 access-list 101 permit tcp 67.228.209.128 0.0.0.15 any eq 1433 access-list 101 permit tcp host 120.136.2.22 any eq 1433 access-list 101 permit tcp host 123.100.90.58 any eq 1433 access-list 101 permit udp 67.228.209.128 0.0.0.15 any eq 1433 access-list 101 permit udp host 120.136.2.22 any eq 1433 access-list 101 permit udp host 123.100.90.58 any eq 1433 access-list 101 permit tcp any any eq 444 access-list 101 permit tcp any any eq 9000 access-list 101 permit tcp any any eq smtp access-list 101 permit udp any any eq non500-isakmp access-list 101 permit udp any any eq isakmp access-list 101 permit esp any any access-list 101 permit tcp any any eq 1723 access-list 101 permit gre any any access-list 101 permit tcp any any eq 22 access-list 101 permit tcp any any eq telnet access-list 102 remark Traffic allowed to enter the router from the Ethernet access-list 102 permit ip any host 192.168.0.254 access-list 102 deny ip any host 192.168.0.255 access-list 102 deny udp any any eq tftp log access-list 102 permit ip 192.168.0.0 0.0.0.255 192.168.99.0 0.0.0.255 access-list 102 deny ip any 0.0.0.0 0.255.255.255 log access-list 102 deny ip any 10.0.0.0 0.255.255.255 log access-list 102 deny ip any 127.0.0.0 0.255.255.255 log access-list 102 deny ip any 169.254.0.0 0.0.255.255 log access-list 102 deny ip any 172.16.0.0 0.15.255.255 log access-list 102 deny ip any 192.0.2.0 0.0.0.255 log access-list 102 deny ip any 192.168.0.0 0.0.255.255 log access-list 102 deny ip any 198.18.0.0 0.1.255.255 log access-list 102 deny udp any any eq 135 log access-list 102 deny tcp any any eq 135 log access-list 102 deny udp any any eq netbios-ns log access-list 102 deny udp any any eq netbios-dgm log access-list 102 deny tcp any any eq 445 log access-list 102 permit ip 192.168.0.0 0.0.0.255 any access-list 102 permit ip any host 255.255.255.255 access-list 102 deny ip any any log access-list 105 remark Traffic to NAT access-list 105 deny ip 192.168.0.0 0.0.0.255 192.168.99.0 0.0.0.255 access-list 105 permit ip 192.168.0.0 0.0.0.255 any access-list 106 remark User to Site VPN Clients access-list 106 permit ip 192.168.0.0 0.0.0.255 any dialer-list 1 protocol ip permit ! line con 0 no modem enable line aux 0 line vty 0 4 access-class 2 in transport input telnet ssh transport output none ! scheduler max-task-time 5000 ! end any ideas? :)

    Read the article

  • File Access problems with SLES 10 SP2 OES2 SP1

    - by Blackhawk131
    We have identified a couple of repeatable, demonstrable scenarios with unexplained rejected folder access on our servers for Mac users. Hopefully, this can be presented to Novell for a solution. What we did to demonstrate scenario 1; 1. setup a PC and Mac side-by-side 2. login to our server and open up to a central location on both Mac and PC 3. on the PC in that central location create a folder 4. on the Mac in that central location drag the created folder to the Mac desktop, this should work fine, no problem 5. on the PC rename that folder 6. on the Mac drag a file to that renamed folder, this should error with the following message; a. You cannot copy some of these items to the destination because their names are too long for the destination. Do you want to skip copying these items and continue copying the other items? b. Select skip, response is the filename is copied to the location with zero or small byte size. Try opening it and you get file is corrupted error message. What we did to demonstrate scenario 2; 1. setup a PC and Mac side-by-side 2. login to our server and open up to a central location on both Mac and PC 3. on the PC in that central location create a folder then create a subfolder 4. copy some content into the subfolder 5. on the Mac in that central location drag the created top level folder to the Mac desktop, this should work fine, no problem 6. on the PC rename that subfolder 7. on the Mac drag that top level folder to the Mac desktop, this should error on the Mac with the following; a. The operation cannot be completed because you do not have sufficient privileges for b. The operation cannot be completed because you do not have sufficient privileges for 8. on the Mac, if you open that subfolder you can see the file copied in step 4 above but, you can not open that file, you get the following message if you try; a. There was an error opening this document. You do not have permission to open this file. 9. on the PC drag some content into the top level folder 10. on the Mac you can open that file directly from the server or copy it locally, no problem, however-the subfolder is still corrupted or locked, whichever 11. on the PC rename the top level folder 12. on the Mac that same file just opened in step 10 above is now not accessible, get the following message; a. The document could not be opened. I have observed some variances in the above. For instance, a change on the PC side may take a moment before you can observer or act on the Mac side - kind of like the server is slow to respond. Also, the error message may vary. However, the key is once a folder, or subfolder, gets renamed by a PC, Mac problems commence. The solution is to create a new folder from a PC and copy the contents of the corrupted folder to the new folder and not rename the folder name. This has to be done on a PC because the corrupted folder is not accessible by a Mac user. Another problem that dovetails with the above is that we know certain characters are not allowed for PC folder or filenames. If a Mac user creates a folder with a slash in the file name, from the PC the user does not see that slash in the name. As soon as the PC user copies a file to that folder, the Mac user is locked from that folder. Will get the following error message; - Sorry, the operation could not be completed because an unexpected error occurred. - (Error code - 50) In addition to the above mentioned character issue with folders, the problem is more evil with filenames. If, for example, you create a file with a slash in the filename on a Mac and copy it to the server you will get the following error message; - You cannot copy some of these items to the destination because their names are too long for the destination. Do you want to skip copying these items and continue copying the other items? Select either Stop or Skip buttons. It does not matter which button is selected. The file name gets copied to the destination location at a reduced size. Depending on the file type, the icon associated with the file may or may not be present. Furthermore, if you open that file on the server you will get the following message; - Couldnt open the file. It may be corrupt or a file format that doesnt recognize. From the users perspective, if they are not observant of the icon or file size, they may disregard the error message and think their file has copied as intended. Only later do they discover the file is corrupt if they open that file. I want to make a note on this problem. It is the PC causing the issue. You can change folder and file names all day on a MAC and you don't have a problem as long as a character is not the issue. Once you change the file name or folder name from a PC the entire folder structure from that level down is corrupted. But it has to be resolved from a PC by creating a new folder and copying the contents to the new folder like stated above. Is something not configured correctly? SUSE Linux Enterprise Server 10 (x86_64) VERSION = 10 PATCHLEVEL = 2 LSB_VERSION="core-2.0-noarch:core-3.0-noarch:core-2.0-x86_64:core-3.0-x86_64" Novell Open Enterprise Server 2.0.1 (x86_64) VERSION = 2.0.1 PATCHLEVEL = 1 BUILD Note: We use Novell clients on all windows systems to connect to the servers for file access and network storage. We use AFP to allow OSx systems to connect to servers.

    Read the article

  • Xenserver 5.5 U2 a bit unstable with an unstable W2003 VM

    - by twistedbrain
    In the last week I had to reboot the host system twice and the second one by means of the power button. The system is a Dell PE 6950 (4 Opteron dual core, 2,8 Ghz, 16 GB RAM, 900 GB disk in a RAID 10 array composed by 4 450GB 15000 rpm disks) with XenServer 5.5 U2. We're installing it and at now there are working in production a 2003 32 bit Windows server VM with 2 GB RAM, 3 vcpu and about 200 GB disk in 4 partition (12 GB boot, 20 GB program, 80 GB user data, 80 GB other data). The first time I was compressing many Windows 2003 folders (some tens GB by means of W2003 compressed folder option) from a Windows remote console and some hours before my colleague installed Backup Exec agent that was alredy installed and that required a reboot (that was pending). The console stopped responding, it was no more possible to connect by means of remote console or by means of the console of the XenCentre, it was still possible from the network to use the shared folder of the VM and the programs on it (2 db and a GIS program), but the print server didn't work any more and I couldn't give remote reboot from other domain controller hosts. I couldn't stop the virtual machine neither from the XenCentre, neither from the command line of the host also forcing the reboot. I had to reboot the host server. Yesterday it has been worst. I installed a template of another VM, CentOS 5.3 and then, put the DVD in the drive of the host. Then, before the install and after the boot I checked for defect the DVD and the W2003 VM began to respond slowly (I was connected by means of an administration remote console) the task manager showed only mid or low load, it is, only the first of the 3 vcpu was loaded (about 70%), while the other two were about at 20% and also the disk I/O was not so heavy. Then the users were not so happy because they couldn't any more use the MS word docs on the server. I immediately stopped the check of the DVD (to do that I had to force the stop of such Centos 5.3 VM), then some users could again use their docs, but other had still problems, so I decided to reboot the VM, but it doesn't stopped, neither from XenCenter, neither from command line, neither forcing the reboot. Then I tried to reboot of the host, but it didn't worked, neither from the XenCentre, neither from the host prompt (shutdown -r now as root: it told that it was shutting down, but then it didn't did that). So I had to power off by means of the power button of the server (before I tried some Magic SyS REQ, but I saw that Xen isn't compiled with this option enabled). What could you suggest about my problem, what can I look, search and see? In the W2003 VM logs there are no errors or warning to explain what happened. Some more exciting, amusing and inspiring words of poetry (the facts happened around 11 am): \# egrep -i 'err|warning' xensource.log [20100219 10:32:05.597|debug|culo|6301 unix-RPC|VBD.plug R:c81bcda701f6|xenops] watch: watching xenstore paths: [ /xapi/0/frontend/vbd/51712/hotplug; /local/domain/0/backend/vbd/0/51712/tapdisk-error ] with timeout 1200.000000 seconds [20100219 10:32:05.597|debug|culo|6301 unix-RPC|VBD.plug R:c81bcda701f6|xenops] watch: fired on /local/domain/0/backend/vbd/0/51712/tapdisk-error [20100219 10:32:14.314|debug|culo|6335 unix-RPC|VBD.unplug R:9258f54578d6|xenops] watch: watching xenstore paths: [ /local/domain/0/backend/vbd/0/51712/shutdown-done; /local/domain/0/error/device/vbd/51712/error ] with timeout 1200.000000 seconds [20100219 10:32:14.337|debug|culo|6335 unix-RPC|VBD.unplug R:9258f54578d6|xenops] xenstore-rm /local/domain/0/error/backend/vbd/0 [20100219 10:32:14.337|debug|culo|6335 unix-RPC|VBD.unplug R:9258f54578d6|xenops] xenstore-rm /local/domain/0/error/device/vbd/51712 [20100219 10:32:14.338|debug|culo|6335 unix-RPC|VBD.unplug R:9258f54578d6|xenops] watch: fired on /local/domain/0/error/device/vbd/51712/error [20100219 10:53:48.903|debug|culo|6418|Async.VM.hard_shutdown R:88d2095678f7|helpers] Ignoring exception: INTERNAL_ERROR: [ Xb.Noent ] while Vmops.destroy_domain: Destroying domid 14 guest session [20100219 10:53:52.048|debug|culo|6418|Async.VM.hard_shutdown R:88d2095678f7|xenops] xenstore-rm /local/domain/0/error/backend/tap/14 [20100219 10:53:52.048|debug|culo|6418|Async.VM.hard_shutdown R:88d2095678f7|xenops] xenstore-rm /local/domain/14/error/device/vbd/51744 [20100219 10:53:52.085|debug|culo|6418|Async.VM.hard_shutdown R:88d2095678f7|xenops] xenstore-rm /local/domain/0/error/backend/tap/14 [20100219 10:53:52.086|debug|culo|6418|Async.VM.hard_shutdown R:88d2095678f7|xenops] xenstore-rm /local/domain/14/error/device/vbd/51728 [20100219 10:53:52.122|debug|culo|6418|Async.VM.hard_shutdown R:88d2095678f7|xenops] xenstore-rm /local/domain/0/error/backend/tap/14 [20100219 10:53:52.122|debug|culo|6418|Async.VM.hard_shutdown R:88d2095678f7|xenops] xenstore-rm /local/domain/14/error/device/vbd/51712 [20100219 10:53:52.127|debug|culo|6418|Async.VM.hard_shutdown R:88d2095678f7|xenops] xenstore-rm /local/domain/0/error/backend/vbd/14 [20100219 10:53:52.128|debug|culo|6418|Async.VM.hard_shutdown R:88d2095678f7|xenops] xenstore-rm /local/domain/14/error/device/vbd/51760 [20100219 10:53:52.496|debug|culo|6418|Async.VM.hard_shutdown R:88d2095678f7|xenops] Device.Vif.hard_shutdown about to blow away backend and error paths [20100219 10:53:52.497|debug|culo|6418|Async.VM.hard_shutdown R:88d2095678f7|xenops] xenstore-rm /local/domain/0/error/backend/vif/14 [20100219 10:53:52.497|debug|culo|6418|Async.VM.hard_shutdown R:88d2095678f7|xenops] xenstore-rm /local/domain/14/error/device/vif/0 [20100219 10:53:53.385|debug|culo|6418|Async.VM.hard_shutdown R:88d2095678f7|xenops] Device.Vif.hard_shutdown about to blow away backend and error paths [20100219 10:53:53.386|debug|culo|6418|Async.VM.hard_shutdown R:88d2095678f7|xenops] xenstore-rm /local/domain/0/error/backend/vif/14 [20100219 10:53:53.386|debug|culo|6418|Async.VM.hard_shutdown R:88d2095678f7|xenops] xenstore-rm /local/domain/14/error/device/vif/1 [20100219 10:53:53.389| warn|culo|6418|Async.VM.hard_shutdown R:88d2095678f7|hotplug] Warning, deleting 'vif' entry from /xapi/14/hotplug/vif/0 [20100219 10:53:53.391| warn|culo|6418|Async.VM.hard_shutdown R:88d2095678f7|hotplug] Warning, deleting 'vif' entry from /xapi/14/hotplug/vif/1 [20100219 11:20:49.766|debug|culo|6484|Async.VM.clean_shutdown R:78d3c3e28cb6|helpers] Ignoring exception: INTERNAL_ERROR: [ Xb.Noent ] while Vmops.destroy_domain: Destroying domid 11 guest session [20100219 11:20:50.339|debug|culo|6484|Async.VM.clean_shutdown R:78d3c3e28cb6|xenops] xenstore-rm /local/domain/0/error/backend/tap/11 [20100219 11:20:50.339|debug|culo|6484|Async.VM.clean_shutdown R:78d3c3e28cb6|xenops] xenstore-rm /local/domain/11/error/device/vbd/832 [20100219 11:20:50.360|debug|culo|6484|Async.VM.clean_shutdown R:78d3c3e28cb6|xenops] xenstore-rm /local/domain/0/error/backend/tap/11 [20100219 11:20:50.360|debug|culo|6484|Async.VM.clean_shutdown R:78d3c3e28cb6|xenops] xenstore-rm /local/domain/11/error/device/vbd/768 [20100219 11:20:50.366|debug|culo|6484|Async.VM.clean_shutdown R:78d3c3e28cb6|xenops] xenstore-rm /local/domain/0/error/backend/vbd/11 [20100219 11:20:50.366|debug|culo|6484|Async.VM.clean_shutdown R:78d3c3e28cb6|xenops] xenstore-rm /local/domain/11/error/device/vbd/5696 [20100219 11:20:50.753|debug|culo|6484|Async.VM.clean_shutdown R:78d3c3e28cb6|xenops] Device.Vif.hard_shutdown about to blow away backend and error paths [20100219 11:20:50.754|debug|culo|6484|Async.VM.clean_shutdown R:78d3c3e28cb6|xenops] xenstore-rm /local/domain/0/error/backend/vif/11 [20100219 11:20:50.754|debug|culo|6484|Async.VM.clean_shutdown R:78d3c3e28cb6|xenops] xenstore-rm /local/domain/11/error/device/vif/1 [20100219 11:20:50.757| warn|culo|6484|Async.VM.clean_shutdown R:78d3c3e28cb6|hotplug] Warning, deleting 'vif' entry from /xapi/11/hotplug/vif/1 [20100219 11:28:13.803|debug|culo|6610 inet-RPC|Connection to VM console R:e9f8b76e8975|console] error: INTERNAL_ERROR: [ Unix.Unix_error(63, "connect", "") ]

    Read the article

  • High Server Load cannot figure out why

    - by Tim Bolton
    My server is currently running CentOS 5.2, with WHM 11.34. Currently, we're at 6.43 to 12 for a load average. The sites that we're hosting are taking a lot time to respond and resolve. top doesn't show anything out of the ordinary and iftop doesn't show a lot of traffic. We have many resellers, and some not so good at writing code, how can we find the culprit? vmstat output: vmstat procs -----------memory---------- ---swap-- -----io---- --system-- -----cpu------ r b swpd free buff cache si so bi bo in cs us sy id wa st 0 2 84 78684 154916 1021080 0 0 72 274 0 14 6 3 80 12 0 top output (ordered by %CPU) top - 21:44:43 up 5 days, 10:39, 3 users, load average: 3.36, 4.18, 4.73 Tasks: 222 total, 3 running, 219 sleeping, 0 stopped, 0 zombie Cpu(s): 5.8%us, 2.3%sy, 0.2%ni, 79.6%id, 11.8%wa, 0.0%hi, 0.2%si, 0.0%st Mem: 2074580k total, 1863044k used, 211536k free, 174828k buffers Swap: 2040212k total, 84k used, 2040128k free, 987604k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 15930 mysql 15 0 138m 46m 4380 S 4 2.3 1:45.87 mysqld 21772 igniteth 17 0 23200 7152 3932 R 4 0.3 0:00.02 php 1586 root 10 -5 0 0 0 S 2 0.0 11:45.19 kjournald 21759 root 15 0 2416 1024 732 R 2 0.0 0:00.01 top 1 root 15 0 2156 648 560 S 0 0.0 0:26.31 init 2 root RT 0 0 0 0 S 0 0.0 0:00.35 migration/0 3 root 34 19 0 0 0 S 0 0.0 0:00.32 ksoftirqd/0 4 root RT 0 0 0 0 S 0 0.0 0:00.00 watchdog/0 5 root RT 0 0 0 0 S 0 0.0 0:02.00 migration/1 6 root 34 19 0 0 0 S 0 0.0 0:00.11 ksoftirqd/1 7 root RT 0 0 0 0 S 0 0.0 0:00.00 watchdog/1 8 root RT 0 0 0 0 S 0 0.0 0:01.29 migration/2 9 root 34 19 0 0 0 S 0 0.0 0:00.26 ksoftirqd/2 10 root RT 0 0 0 0 S 0 0.0 0:00.00 watchdog/2 11 root RT 0 0 0 0 S 0 0.0 0:00.90 migration/3 12 root 34 19 0 0 0 R 0 0.0 0:00.20 ksoftirqd/3 13 root RT 0 0 0 0 S 0 0.0 0:00.00 watchdog/3 top output (ordered by CPU time) top - 21:46:12 up 5 days, 10:41, 3 users, load average: 2.88, 3.82, 4.55 Tasks: 217 total, 1 running, 216 sleeping, 0 stopped, 0 zombie Cpu(s): 3.7%us, 2.0%sy, 2.0%ni, 67.2%id, 25.0%wa, 0.0%hi, 0.1%si, 0.0%st Mem: 2074580k total, 1959516k used, 115064k free, 183116k buffers Swap: 2040212k total, 84k used, 2040128k free, 1090308k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ TIME COMMAND 32367 root 16 0 215m 212m 1548 S 0 10.5 62:03.63 62:03 tailwatchd 1586 root 10 -5 0 0 0 S 0 0.0 11:45.27 11:45 kjournald 1576 root 10 -5 0 0 0 S 0 0.0 2:37.86 2:37 kjournald 27722 root 16 0 2556 1184 800 S 0 0.1 1:48.94 1:48 top 15930 mysql 15 0 138m 46m 4380 S 4 2.3 1:48.63 1:48 mysqld 2932 root 34 19 0 0 0 S 0 0.0 1:41.05 1:41 kipmi0 226 root 10 -5 0 0 0 S 0 0.0 1:34.33 1:34 kswapd0 2671 named 25 0 74688 7400 2116 S 0 0.4 1:23.58 1:23 named 3229 root 15 0 10300 3348 2724 S 0 0.2 0:40.85 0:40 sshd 1580 root 10 -5 0 0 0 S 0 0.0 0:30.62 0:30 kjournald 1 root 17 0 2156 648 560 S 0 0.0 0:26.32 0:26 init 2616 root 15 0 1816 576 480 S 0 0.0 0:23.50 0:23 syslogd 1584 root 10 -5 0 0 0 S 0 0.0 0:18.67 0:18 kjournald 4342 root 34 19 27692 11m 2116 S 0 0.5 0:18.23 0:18 yum-updatesd 8044 bollingp 15 0 3456 2036 740 S 1 0.1 0:15.56 0:15 imapd 26 root 10 -5 0 0 0 S 0 0.0 0:14.18 0:14 kblockd/1 7989 gmailsit 16 0 3196 1748 736 S 0 0.1 0:10.43 0:10 imapd iostat -xtk 1 10 output [root@server1 tmp]# iostat -xtk 1 10 Linux 2.6.18-53.el5 12/18/2012 Time: 09:51:06 PM avg-cpu: %user %nice %system %iowait %steal %idle 5.83 0.19 2.53 11.85 0.00 79.60 Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await svctm %util sda 1.37 118.83 18.70 54.27 131.47 692.72 22.59 4.90 67.19 3.10 22.59 sdb 0.35 39.33 20.33 61.43 158.79 403.22 13.75 5.23 63.93 3.77 30.80 Time: 09:51:07 PM avg-cpu: %user %nice %system %iowait %steal %idle 1.50 0.00 0.50 24.00 0.00 74.00 Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await svctm %util sda 0.00 25.00 2.00 2.00 128.00 108.00 118.00 0.03 7.25 4.00 1.60 sdb 0.00 16.00 41.00 145.00 200.00 668.00 9.33 107.92 272.72 5.38 100.10 Time: 09:51:08 PM avg-cpu: %user %nice %system %iowait %steal %idle 2.00 0.00 1.50 29.50 0.00 67.00 Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await svctm %util sda 0.00 95.00 3.00 33.00 12.00 480.00 27.33 0.07 1.72 1.31 4.70 sdb 0.00 14.00 1.00 228.00 4.00 960.00 8.42 143.49 568.01 4.37 100.10 Time: 09:51:09 PM avg-cpu: %user %nice %system %iowait %steal %idle 13.28 0.00 2.76 21.30 0.00 62.66 Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await svctm %util sda 0.00 21.00 1.00 19.00 16.00 192.00 20.80 0.06 3.55 1.30 2.60 sdb 0.00 36.00 28.00 181.00 124.00 884.00 9.65 121.16 617.31 4.79 100.10 Time: 09:51:10 PM avg-cpu: %user %nice %system %iowait %steal %idle 4.74 0.00 1.50 25.19 0.00 68.58 Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await svctm %util sda 0.00 20.00 3.00 15.00 12.00 136.00 16.44 0.17 7.11 3.11 5.60 sdb 0.00 0.00 103.00 60.00 544.00 248.00 9.72 52.35 545.23 6.14 100.10 Time: 09:51:11 PM avg-cpu: %user %nice %system %iowait %steal %idle 1.24 0.00 1.24 25.31 0.00 72.21 Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await svctm %util sda 0.00 75.00 4.00 28.00 16.00 416.00 27.00 0.08 3.72 2.03 6.50 sdb 2.00 9.00 124.00 17.00 616.00 104.00 10.21 3.73 213.73 7.10 100.10 Time: 09:51:12 PM avg-cpu: %user %nice %system %iowait %steal %idle 1.00 0.00 0.75 24.31 0.00 73.93 Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await svctm %util sda 0.00 24.00 1.00 9.00 4.00 132.00 27.20 0.01 1.20 1.10 1.10 sdb 4.00 40.00 103.00 48.00 528.00 212.00 9.80 105.21 104.32 6.64 100.20 Time: 09:51:13 PM avg-cpu: %user %nice %system %iowait %steal %idle 2.50 0.00 1.75 23.25 0.00 72.50 Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await svctm %util sda 0.00 125.74 3.96 46.53 15.84 689.11 27.92 0.20 4.06 2.41 12.18 sdb 2.97 0.00 91.09 84.16 419.80 471.29 10.17 85.85 590.78 5.66 99.11 Time: 09:51:14 PM avg-cpu: %user %nice %system %iowait %steal %idle 0.75 0.00 0.50 24.94 0.00 73.82 Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await svctm %util sda 0.00 88.00 1.00 7.00 4.00 380.00 96.00 0.04 4.38 3.00 2.40 sdb 3.00 7.00 111.00 44.00 540.00 208.00 9.65 18.58 581.79 6.46 100.10 Time: 09:51:15 PM avg-cpu: %user %nice %system %iowait %steal %idle 11.03 0.00 3.26 26.57 0.00 59.15 Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await svctm %util sda 0.00 145.00 7.00 53.00 28.00 792.00 27.33 0.15 2.50 1.55 9.30 sdb 1.00 0.00 155.00 0.00 800.00 0.00 10.32 2.85 18.63 6.46 100.10 [root@server1 tmp]# MySQL Show Full Processlist mysql> show full processlist; +------+---------------+-----------+-----------------------+----------------+------+----------------------------+----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+ | Id | User | Host | db | Command | Time | State | Info | +------+---------------+-----------+-----------------------+----------------+------+----------------------------+----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+ | 1 | DB_USER_ONE | localhost | DB_ONE | Query | 3 | waiting for handler insert | INSERT DELAYED INTO defers (mailtime,msgid,email,transport_method,message,host,ip,router,deliveryuser,deliverydomain) VALUES(FROM_UNIXTIME('1355879748'),'1TivwL-0003y8-8l','[email protected]','remote_smtp','SMTP error from remote mail server after initial connection: host mx1.mail.tw.yahoo.com [203.188.197.119]: 421 4.7.0 [TS01] Messages from 75.125.90.146 temporarily deferred due to user complaints - 4.16.55.1; see http://postmaster.yahoo.com/421-ts01.html','mx1.mail.tw.yahoo.com','203.188.197.119','lookuphost','','') | | 2 | DELAYED | localhost | DB_ONE | Delayed insert | 52 | insert | | | 3 | DELAYED | localhost | DB_ONE | Delayed insert | 68 | insert | | | 911 | DELAYED | localhost | DB_ONE | Delayed insert | 99 | Waiting for INSERT | | | 993 | DB_USER_TWO | localhost | DB_TWO | Sleep | 832 | | NULL | | 994 | DB_USER_ONE | localhost | DB_ONE | Query | 185 | Locked | delete from failures where FROM_UNIXTIME(UNIX_TIMESTAMP(NOW())-1296000) > mailtime | | 1102 | DB_USER_THREE | localhost | DB_THREE | Query | 29 | NULL | commit | | 1249 | DB_USER_FOUR | localhost | DB_FOUR | Query | 13 | NULL | commit | | 1263 | root | localhost | DB_FIVE | Query | 0 | NULL | show full processlist | | 1264 | DB_USER_SIX | localhost | DB_SIX | Query | 3 | NULL | commit | +------+---------------+-----------+-----------------------+----------------+------+----------------------------+----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+ 10 rows in set (0.00 sec)

    Read the article

  • Outbound traffic being blocked for MIP/VIPped servers (Juniper SSG5)

    - by Mark S. Rasmussen
    As we've been having some problems with sporadic packet loss, I've been preparing a replacement router (also an SSG5) for our current Juniper SSG5. I've setup the new SSG5 identically to the old one. We have a /29 IP range with a single IP setup as a MIP map to a server and two others being used for VIP maps. Each VIP/MIP is accompanied by relevant policies. Long story short - we tried connected the new SSG5 and some things were not working as they should. No problem, I just reconnected the old one. However, some things are still broken, even when I reconnected the old one. I fear I may have inadvertently changed some settings while browsing through old settings in my attempt to reconfigure the new SSG5 unit. All inbound traffic seems to work as expected. However, the 192.168.2.202 server can't initiate any outbound connections. It works perfectly on the local network, but any pings or DNS lookups to external IP's fail. The MIP & VIP map to it works perfectly - I can access it through HTTP and RDP without issues. Any tips on what to debug, or where I've messed up my config? I've attached the full config here (with anonymized IPs): set clock timezone 1 set vrouter trust-vr sharable set vrouter "untrust-vr" exit set vrouter "trust-vr" unset auto-route-export exit set service "MyVOIP_UDP4569" protocol udp src-port 0-65535 dst-port 4569-4569 set service "MyVOIP_TCP22" protocol tcp src-port 0-65535 dst-port 22-22 set service "MyRDP" protocol tcp src-port 0-65535 dst-port 3389-3389 set service "MyRsync" protocol tcp src-port 0-65535 dst-port 873-873 set service "NZ_FTP" protocol tcp src-port 0-65535 dst-port 40000-41000 set service "NZ_FTP" + tcp src-port 0-65535 dst-port 21-21 set service "PPTP-VPN" protocol 47 src-port 2048-2048 dst-port 2048-2048 set service "PPTP-VPN" + tcp src-port 1024-65535 dst-port 1723-1723 set service "NZ_FMS_1935" protocol tcp src-port 0-65535 dst-port 1935-1935 set service "NZ_FMS_1935" + udp src-port 0-65535 dst-port 1935-1935 set service "NZ_FMS_8080" protocol tcp src-port 0-65535 dst-port 8080-8080 set service "CrashPlan Server" protocol tcp src-port 0-65535 dst-port 4280-4280 set service "CrashPlan Console" protocol tcp src-port 0-65535 dst-port 4282-4282 unset alg sip enable set auth-server "Local" id 0 set auth-server "Local" server-name "Local" set auth default auth server "Local" set auth radius accounting port 1646 set admin auth timeout 10 set admin auth server "Local" set admin format dos set vip multi-port set zone "Trust" vrouter "trust-vr" set zone "Untrust" vrouter "trust-vr" set zone "DMZ" vrouter "trust-vr" set zone "VLAN" vrouter "trust-vr" set zone "Untrust-Tun" vrouter "trust-vr" set zone "Trust" tcp-rst set zone "Untrust" block unset zone "Untrust" tcp-rst set zone "DMZ" tcp-rst set zone "VLAN" block unset zone "VLAN" tcp-rst set zone "Untrust" screen tear-drop set zone "Untrust" screen syn-flood set zone "Untrust" screen ping-death set zone "Untrust" screen ip-filter-src set zone "Untrust" screen land set zone "V1-Untrust" screen tear-drop set zone "V1-Untrust" screen syn-flood set zone "V1-Untrust" screen ping-death set zone "V1-Untrust" screen ip-filter-src set zone "V1-Untrust" screen land set interface ethernet0/0 phy full 100mb set interface ethernet0/3 phy full 100mb set interface ethernet0/4 phy full 100mb set interface ethernet0/5 phy full 100mb set interface ethernet0/6 phy full 100mb set interface "ethernet0/0" zone "Untrust" set interface "ethernet0/1" zone "Null" set interface "bgroup0" zone "Trust" set interface "bgroup1" zone "Trust" set interface "bgroup2" zone "Trust" set interface bgroup2 port ethernet0/2 set interface bgroup0 port ethernet0/3 set interface bgroup0 port ethernet0/4 set interface bgroup1 port ethernet0/5 set interface bgroup1 port ethernet0/6 unset interface vlan1 ip set interface ethernet0/0 ip 212.242.193.18/29 set interface ethernet0/0 route set interface bgroup0 ip 192.168.1.1/24 set interface bgroup0 nat set interface bgroup1 ip 192.168.2.1/24 set interface bgroup1 nat set interface bgroup2 ip 192.168.3.1/24 set interface bgroup2 nat set interface ethernet0/0 gateway 212.242.193.17 unset interface vlan1 bypass-others-ipsec unset interface vlan1 bypass-non-ip set interface ethernet0/0 ip manageable set interface bgroup0 ip manageable set interface bgroup1 ip manageable set interface bgroup2 ip manageable set interface bgroup0 manage mtrace unset interface bgroup1 manage ssh unset interface bgroup1 manage telnet unset interface bgroup1 manage snmp unset interface bgroup1 manage ssl unset interface bgroup1 manage web unset interface bgroup2 manage ssh unset interface bgroup2 manage telnet unset interface bgroup2 manage snmp unset interface bgroup2 manage ssl unset interface bgroup2 manage web set interface ethernet0/0 vip 212.242.193.19 2048 "PPTP-VPN" 192.168.1.131 set interface ethernet0/0 vip 212.242.193.19 + 4280 "CrashPlan Server" 192.168.1.131 set interface ethernet0/0 vip 212.242.193.19 + 4282 "CrashPlan Console" 192.168.1.131 set interface ethernet0/0 vip 212.242.193.22 22 "MyVOIP_TCP22" 192.168.2.127 set interface ethernet0/0 vip 212.242.193.22 + 4569 "MyVOIP_UDP4569" 192.168.2.127 set interface ethernet0/0 vip 212.242.193.22 + 3389 "MyRDP" 192.168.2.202 set interface ethernet0/0 vip 212.242.193.22 + 873 "MyRsync" 192.168.2.201 set interface ethernet0/0 vip 212.242.193.22 + 80 "HTTP" 192.168.2.202 set interface ethernet0/0 vip 212.242.193.22 + 2048 "PPTP-VPN" 192.168.2.201 set interface ethernet0/0 vip 212.242.193.22 + 8080 "NZ_FMS_8080" 192.168.2.216 set interface ethernet0/0 vip 212.242.193.22 + 1935 "NZ_FMS_1935" 192.168.2.216 set interface bgroup0 dhcp server service set interface bgroup1 dhcp server service set interface bgroup2 dhcp server service set interface bgroup0 dhcp server auto set interface bgroup1 dhcp server auto set interface bgroup2 dhcp server auto set interface bgroup0 dhcp server option domainname iplan set interface bgroup0 dhcp server option dns1 192.168.1.131 set interface bgroup1 dhcp server option domainname nzlan set interface bgroup1 dhcp server option dns1 192.168.2.202 set interface bgroup2 dhcp server option dns1 8.8.8.8 set interface bgroup2 dhcp server option wins1 8.8.4.4 set interface bgroup0 dhcp server ip 192.168.1.2 to 192.168.1.116 set interface bgroup1 dhcp server ip 192.168.2.2 to 192.168.2.116 set interface bgroup2 dhcp server ip 192.168.3.2 to 192.168.3.126 unset interface bgroup0 dhcp server config next-server-ip unset interface bgroup1 dhcp server config next-server-ip unset interface bgroup2 dhcp server config next-server-ip set interface "ethernet0/0" mip 212.242.193.21 host 192.168.2.202 netmask 255.255.255.255 vr "trust-vr" set interface "serial0/0" modem settings "USR" init "AT&F" set interface "serial0/0" modem settings "USR" active set interface "serial0/0" modem speed 115200 set interface "serial0/0" modem retry 3 set interface "serial0/0" modem interval 10 set interface "serial0/0" modem idle-time 10 set pak-poll p1queue pak-threshold 96 set pak-poll p2queue pak-threshold 32 set flow tcp-mss unset flow tcp-syn-check set dns host dns1 0.0.0.0 set dns host dns2 0.0.0.0 set dns host dns3 0.0.0.0 set address "Trust" "192.168.1.0/24" 192.168.1.0 255.255.255.0 set address "Trust" "192.168.2.0/24" 192.168.2.0 255.255.255.0 set address "Trust" "192.168.3.0/24" 192.168.3.0 255.255.255.0 set ike respond-bad-spi 1 unset ike ikeid-enumeration unset ike dos-protection unset ipsec access-session enable set ipsec access-session maximum 5000 set ipsec access-session upper-threshold 0 set ipsec access-session lower-threshold 0 set ipsec access-session dead-p2-sa-timeout 0 unset ipsec access-session log-error unset ipsec access-session info-exch-connected unset ipsec access-session use-error-log set l2tp default ppp-auth chap set url protocol websense exit set policy id 1 from "Trust" to "Untrust" "Any" "Any" "ANY" permit traffic set policy id 1 exit set policy id 2 from "Untrust" to "Trust" "Any" "VIP(212.242.193.19)" "PPTP-VPN" permit traffic set policy id 2 exit set policy id 3 from "Untrust" to "Trust" "Any" "VIP(212.242.193.22)" "HTTP" permit traffic priority 0 set policy id 3 set service "MyRDP" set service "MyRsync" set service "MyVOIP_TCP22" set service "MyVOIP_UDP4569" exit set policy id 6 from "Trust" to "Trust" "192.168.1.0/24" "192.168.2.0/24" "ANY" deny set policy id 6 exit set policy id 7 from "Trust" to "Trust" "192.168.2.0/24" "192.168.1.0/24" "ANY" deny set policy id 7 exit set policy id 8 from "Trust" to "Trust" "192.168.3.0/24" "192.168.1.0/24" "ANY" deny set policy id 8 exit set policy id 9 from "Trust" to "Trust" "192.168.3.0/24" "192.168.2.0/24" "ANY" deny set policy id 9 exit set policy id 10 from "Untrust" to "Trust" "Any" "MIP(212.242.193.21)" "NZ_FTP" permit set policy id 10 exit set policy id 11 from "Untrust" to "Trust" "Any" "VIP(212.242.193.22)" "PPTP-VPN" permit set policy id 11 exit set policy id 12 from "Untrust" to "Trust" "Any" "VIP(212.242.193.22)" "NZ_FMS_1935" permit set policy id 12 set service "NZ_FMS_8080" exit set policy id 13 from "Untrust" to "Trust" "Any" "VIP(212.242.193.19)" "CrashPlan Console" permit set policy id 13 set service "CrashPlan Server" exit set nsmgmt bulkcli reboot-timeout 60 set ssh version v2 set config lock timeout 5 set snmp port listen 161 set snmp port trap 162 set vrouter "untrust-vr" exit set vrouter "trust-vr" unset add-default-route exit set vrouter "untrust-vr" exit set vrouter "trust-vr" exit

    Read the article

  • Bacula windows client could not connect to Bacula director

    - by pr0f-r00t
    I have a Bacula server on my Linux Debian squeeze host (Bacula version 5.0.2) and a Bacula client on Windows XP SP3. On my network each client can see each other, can share files and can ping. On my local server I could run bconsole and the server responds but when I run bconsole or bat on my windows client the server does not respond. Here are my configuration files: bacula-dir.conf: # # Default Bacula Director Configuration file # # The only thing that MUST be changed is to add one or more # file or directory names in the Include directive of the # FileSet resource. # # For Bacula release 5.0.2 (28 April 2010) -- debian squeeze/sid # # You might also want to change the default email address # from root to your address. See the "mail" and "operator" # directives in the Messages resource. # Director { # define myself Name = nima-desktop-dir DIRport = 9101 # where we listen for UA connections QueryFile = "/etc/bacula/scripts/query.sql" WorkingDirectory = "/var/lib/bacula" PidDirectory = "/var/run/bacula" Maximum Concurrent Jobs = 1 Password = "Cv70F6pf1t6pBopT4vQOnigDrR0v3L" # Console password Messages = Daemon DirAddress = 127.0.0.1 # DirAddress = 72.16.208.1 } JobDefs { Name = "DefaultJob" Type = Backup Level = Incremental Client = nima-desktop-fd FileSet = "Full Set" Schedule = "WeeklyCycle" Storage = File Messages = Standard Pool = File Priority = 10 Write Bootstrap = "/var/lib/bacula/%c.bsr" } # # Define the main nightly save backup job # By default, this job will back up to disk in /nonexistant/path/to/file/archive/dir Job { Name = "BackupClient1" JobDefs = "DefaultJob" } #Job { # Name = "BackupClient2" # Client = nima-desktop2-fd # JobDefs = "DefaultJob" #} # Backup the catalog database (after the nightly save) Job { Name = "BackupCatalog" JobDefs = "DefaultJob" Level = Full FileSet="Catalog" Schedule = "WeeklyCycleAfterBackup" # This creates an ASCII copy of the catalog # Arguments to make_catalog_backup.pl are: # make_catalog_backup.pl <catalog-name> RunBeforeJob = "/etc/bacula/scripts/make_catalog_backup.pl MyCatalog" # This deletes the copy of the catalog RunAfterJob = "/etc/bacula/scripts/delete_catalog_backup" Write Bootstrap = "/var/lib/bacula/%n.bsr" Priority = 11 # run after main backup } # # Standard Restore template, to be changed by Console program # Only one such job is needed for all Jobs/Clients/Storage ... # Job { Name = "RestoreFiles" Type = Restore Client=nima-desktop-fd FileSet="Full Set" Storage = File Pool = Default Messages = Standard Where = /nonexistant/path/to/file/archive/dir/bacula-restores } # job for vmware windows host Job { Name = "nimaxp-fd" Type = Backup Client = nimaxp-fd FileSet = "nimaxp-fs" Schedule = "WeeklyCycle" Storage = File Messages = Standard Pool = Default Write Bootstrap = "/var/bacula/working/rsys-win-www-1-fd.bsr" #Change this } # job for vmware windows host Job { Name = "arg-michael-fd" Type = Backup Client = nimaxp-fd FileSet = "arg-michael-fs" Schedule = "WeeklyCycle" Storage = File Messages = Standard Pool = Default Write Bootstrap = "/var/bacula/working/rsys-win-www-1-fd.bsr" #Change this } # List of files to be backed up FileSet { Name = "Full Set" Include { Options { signature = MD5 } # # Put your list of files here, preceded by 'File =', one per line # or include an external list with: # # File = <file-name # # Note: / backs up everything on the root partition. # if you have other partitions such as /usr or /home # you will probably want to add them too. # # By default this is defined to point to the Bacula binary # directory to give a reasonable FileSet to backup to # disk storage during initial testing. # File = /usr/sbin } # # If you backup the root directory, the following two excluded # files can be useful # Exclude { File = /var/lib/bacula File = /nonexistant/path/to/file/archive/dir File = /proc File = /tmp File = /.journal File = /.fsck } } # List of files to be backed up FileSet { Name = "nimaxp-fs" Enable VSS = yes Include { Options { signature = MD5 } File = "C:\softwares" File = C:/softwares File = "C:/softwares" } } # List of files to be backed up FileSet { Name = "arg-michael-fs" Enable VSS = yes Include { Options { signature = MD5 } File = "C:\softwares" File = C:/softwares File = "C:/softwares" } } # # When to do the backups, full backup on first sunday of the month, # differential (i.e. incremental since full) every other sunday, # and incremental backups other days Schedule { Name = "WeeklyCycle" Run = Full 1st sun at 23:05 Run = Differential 2nd-5th sun at 23:05 Run = Incremental mon-sat at 23:05 } # This schedule does the catalog. It starts after the WeeklyCycle Schedule { Name = "WeeklyCycleAfterBackup" Run = Full sun-sat at 23:10 } # This is the backup of the catalog FileSet { Name = "Catalog" Include { Options { signature = MD5 } File = "/var/lib/bacula/bacula.sql" } } # Client (File Services) to backup Client { Name = nima-desktop-fd Address = localhost FDPort = 9102 Catalog = MyCatalog Password = "_MOfxEuRzxijc0DIMcBqtyx9iW1tzE7V6" # password for FileDaemon File Retention = 30 days # 30 days Job Retention = 6 months # six months AutoPrune = yes # Prune expired Jobs/Files } # Client file service for vmware windows host Client { Name = nimaxp-fd Address = nimaxp FDPort = 9102 Catalog = MyCatalog Password = "Ku8F1YAhDz5EMUQjiC9CcSw95Aho9XbXailUmjOaAXJP" # password for FileDaemon File Retention = 30 days # 30 days Job Retention = 6 months # six months AutoPrune = yes # Prune expired Jobs/Files } # Client file service for vmware windows host Client { Name = arg-michael-fd Address = 192.168.0.61 FDPort = 9102 Catalog = MyCatalog Password = "b4E9FU6s/9Zm4BVFFnbXVKhlyd/zWxj0oWITKK6CALR/" # password for FileDaemon File Retention = 30 days # 30 days Job Retention = 6 months # six months AutoPrune = yes # Prune expired Jobs/Files } # # Second Client (File Services) to backup # You should change Name, Address, and Password before using # #Client { # Name = nima-desktop2-fd # Address = localhost2 # FDPort = 9102 # Catalog = MyCatalog # Password = "_MOfxEuRzxijc0DIMcBqtyx9iW1tzE7V62" # password for FileDaemon 2 # File Retention = 30 days # 30 days # Job Retention = 6 months # six months # AutoPrune = yes # Prune expired Jobs/Files #} # Definition of file storage device Storage { Name = File # Do not use "localhost" here Address = localhost # N.B. Use a fully qualified name here SDPort = 9103 Password = "Cj-gtxugC4dAymY01VTSlUgMTT5LFMHf9" Device = FileStorage Media Type = File } # Definition of DDS tape storage device #Storage { # Name = DDS-4 # Do not use "localhost" here # Address = localhost # N.B. Use a fully qualified name here # SDPort = 9103 # Password = "Cj-gtxugC4dAymY01VTSlUgMTT5LFMHf9" # password for Storage daemon # Device = DDS-4 # must be same as Device in Storage daemon # Media Type = DDS-4 # must be same as MediaType in Storage daemon # Autochanger = yes # enable for autochanger device #} # Definition of 8mm tape storage device #Storage { # Name = "8mmDrive" # Do not use "localhost" here # Address = localhost # N.B. Use a fully qualified name here # SDPort = 9103 # Password = "Cj-gtxugC4dAymY01VTSlUgMTT5LFMHf9" # Device = "Exabyte 8mm" # MediaType = "8mm" #} # Definition of DVD storage device #Storage { # Name = "DVD" # Do not use "localhost" here # Address = localhost # N.B. Use a fully qualified name here # SDPort = 9103 # Password = "Cj-gtxugC4dAymY01VTSlUgMTT5LFMHf9" # Device = "DVD Writer" # MediaType = "DVD" #} # Generic catalog service Catalog { Name = MyCatalog # Uncomment the following line if you want the dbi driver # dbdriver = "dbi:sqlite3"; dbaddress = 127.0.0.1; dbport = dbname = "bacula"; dbuser = ""; dbpassword = "" } # Reasonable message delivery -- send most everything to email address # and to the console Messages { Name = Standard # # NOTE! If you send to two email or more email addresses, you will need # to replace the %r in the from field (-f part) with a single valid # email address in both the mailcommand and the operatorcommand. # What this does is, it sets the email address that emails would display # in the FROM field, which is by default the same email as they're being # sent to. However, if you send email to more than one address, then # you'll have to set the FROM address manually, to a single address. # for example, a '[email protected]', is better since that tends to # tell (most) people that its coming from an automated source. # mailcommand = "/usr/lib/bacula/bsmtp -h localhost -f \"\(Bacula\) \<%r\>\" -s \"Bacula: %t %e of %c %l\" %r" operatorcommand = "/usr/lib/bacula/bsmtp -h localhost -f \"\(Bacula\) \<%r\>\" -s \"Bacula: Intervention needed for %j\" %r" mail = root@localhost = all, !skipped operator = root@localhost = mount console = all, !skipped, !saved # # WARNING! the following will create a file that you must cycle from # time to time as it will grow indefinitely. However, it will # also keep all your messages if they scroll off the console. # append = "/var/lib/bacula/log" = all, !skipped catalog = all } # # Message delivery for daemon messages (no job). Messages { Name = Daemon mailcommand = "/usr/lib/bacula/bsmtp -h localhost -f \"\(Bacula\) \<%r\>\" -s \"Bacula daemon message\" %r" mail = root@localhost = all, !skipped console = all, !skipped, !saved append = "/var/lib/bacula/log" = all, !skipped } # Default pool definition Pool { Name = Default Pool Type = Backup Recycle = yes # Bacula can automatically recycle Volumes AutoPrune = yes # Prune expired volumes Volume Retention = 365 days # one year } # File Pool definition Pool { Name = File Pool Type = Backup Recycle = yes # Bacula can automatically recycle Volumes AutoPrune = yes # Prune expired volumes Volume Retention = 365 days # one year Maximum Volume Bytes = 50G # Limit Volume size to something reasonable Maximum Volumes = 100 # Limit number of Volumes in Pool } # Scratch pool definition Pool { Name = Scratch Pool Type = Backup } # # Restricted console used by tray-monitor to get the status of the director # Console { Name = nima-desktop-mon Password = "-T0h6HCXWYNy0wWqOomysMvRGflQ_TA6c" CommandACL = status, .status } bacula-fd.conf on client: # # Default Bacula File Daemon Configuration file # # For Bacula release 5.0.3 (08/05/10) -- Windows MinGW32 # # There is not much to change here except perhaps the # File daemon Name # # # "Global" File daemon configuration specifications # FileDaemon { # this is me Name = nimaxp-fd FDport = 9102 # where we listen for the director WorkingDirectory = "C:\\Program Files\\Bacula\\working" Pid Directory = "C:\\Program Files\\Bacula\\working" # Plugin Directory = "C:\\Program Files\\Bacula\\plugins" Maximum Concurrent Jobs = 10 } # # List Directors who are permitted to contact this File daemon # Director { Name = Nima-desktop-dir Password = "Cv70F6pf1t6pBopT4vQOnigDrR0v3L" } # # Restricted Director, used by tray-monitor to get the # status of the file daemon # Director { Name = nimaxp-mon Password = "q5b5g+LkzDXorMViFwOn1/TUnjUyDlg+gRTBp236GrU3" Monitor = yes } # Send all messages except skipped files back to Director Messages { Name = Standard director = Nima-desktop = all, !skipped, !restored } I have checked my firewall and disabled the firewall but it doesn't work.

    Read the article

  • Hung JVM consuming 100% CPU

    - by Bogdan
    We have a JAVA server running on Sun JRE 6u20 on Linux 32-bit (CentOS). We use the Server Hotspot with CMS collector with the following options (I've only provided the relevant ones): -Xmx896m -Xss128k -XX:NewSize=384M -XX:MaxPermSize=96m -XX:+UseParNewGC -XX:+UseConcMarkSweepGC Sometimes, after running for a while, the JVM seems to slip into a hung state, whereby even though we don't make any requests to the application, the CPU continues to spin at 100% (we have 8 logical CPUs, so it looks like only one CPU does the spinning). In this state the JVM doesn't respond to SIGHUP signals (kill -3) and we can't connect to it normally with jstack. We CAN connect with "jstack -F", but the output is dodgy (we can see lots of NullPointerExceptions from JStack apparently because it wasn't able to 'walk' some stacks). So the "jstack -F" output seems to be useless. We have run a stack dump from "gdb" though, and we were able to match the thread id that spins the CPU (we found that using "top" with a per-thread view - "H" option) with a thread stack that appears in the gdb result and this is how it looks like: Thread 443 (Thread 0x7e5b90 (LWP 26310)): #0 0x0115ebd3 in CompactibleFreeListSpace::block_size(HeapWord const*) const () from /usr/java/jdk1.6.0_20/jre/lib/i386/server/libjvm.so #1 0x01160ff9 in CompactibleFreeListSpace::prepare_for_compaction(CompactPoint*) () from /usr/java/jdk1.6.0_20/jre/lib/i386/server/libjvm.so #2 0x0123456c in Generation::prepare_for_compaction(CompactPoint*) () from /usr/java/jdk1.6.0_20/jre/lib/i386/server/libjvm.so #3 0x01229b2c in GenCollectedHeap::prepare_for_compaction() () from /usr/java/jdk1.6.0_20/jre/lib/i386/server/libjvm.so #4 0x0122a7fc in GenMarkSweep::invoke_at_safepoint(int, ReferenceProcessor*, bool) () from /usr/java/jdk1.6.0_20/jre/lib/i386/server/libjvm.so #5 0x01186024 in CMSCollector::do_compaction_work(bool) () from /usr/java/jdk1.6.0_20/jre/lib/i386/server/libjvm.so #6 0x011859ee in CMSCollector::acquire_control_and_collect(bool, bool) () from /usr/java/jdk1.6.0_20/jre/lib/i386/server/libjvm.so #7 0x01185705 in ConcurrentMarkSweepGeneration::collect(bool, bool, unsigned int, bool) () from /usr/java/jdk1.6.0_20/jre/lib/i386/server/libjvm.so #8 0x01227f53 in GenCollectedHeap::do_collection(bool, bool, unsigned int, bool, int) () from /usr/java/jdk1.6.0_20/jre/lib/i386/server/libjvm.so #9 0x0115c7b5 in GenCollectorPolicy::satisfy_failed_allocation(unsigned int, bool) () from /usr/java/jdk1.6.0_20/jre/lib/i386/server/libjvm.so #10 0x0122859c in GenCollectedHeap::satisfy_failed_allocation(unsigned int, bool) () from /usr/java/jdk1.6.0_20/jre/lib/i386/server/libjvm.so #11 0x0158a8ce in VM_GenCollectForAllocation::doit() () from /usr/java/jdk1.6.0_20/jre/lib/i386/server/libjvm.so #12 0x015987e6 in VM_Operation::evaluate() () from /usr/java/jdk1.6.0_20/jre/lib/i386/server/libjvm.so #13 0x01597c93 in VMThread::evaluate_operation(VM_Operation*) () from /usr/java/jdk1.6.0_20/jre/lib/i386/server/libjvm.so #14 0x01597f0f in VMThread::loop() () from /usr/java/jdk1.6.0_20/jre/lib/i386/server/libjvm.so #15 0x015979f0 in VMThread::run() () from /usr/java/jdk1.6.0_20/jre/lib/i386/server/libjvm.so #16 0x0145c24e in java_start(Thread*) () from /usr/java/jdk1.6.0_20/jre/lib/i386/server/libjvm.so #17 0x00ccd46b in start_thread () from /lib/libpthread.so.0 #18 0x00bc2dbe in clone () from /lib/libc.so.6 It seems that a JVM thread is spinning while doing some CMS related work. We have checked the memory usage on the box, there seems to be enough memory available and the system is not swapping. Has anyone come across such a situation? Does it look like a JVM bug? UPDATE I've obtained some more information about this problem (it happened again on a server that has been running for more than 7 days). When the JVM entered the "hung" state it stayed like that for 2 hours until the server was manually restarted. We have obtained a core dump of the process and the gc log. We tried to get a heap dump as well, but "jmap" failed. We tried to use jmap -F but then only a 4Mb file was written before the program aborted with an exception (something about the a memory location not being accessible). So far I think the most interesting information comes from the gc log. It seems that the GC logging stopped as well (possibly at the time when the VM thread went into the long loop): 657501.199: [Full GC (System) 657501.199: [CMS: 400352K->313412K(524288K), 2.4024120 secs] 660634K->313412K(878208K), [CMS Perm : 29455K->29320K(68568K)], 2.4026470 secs] [Times: user=2.39 sys=0.01, real=2.40 secs] 657513.941: [GC 657513.941: [ParNew: 314624K->13999K(353920K), 0.0228180 secs] 628036K->327412K(878208K), 0.0230510 secs] [Times: user=0.08 sys=0.00, real=0.02 secs] 657523.772: [GC 657523.772: [ParNew: 328623K->17110K(353920K), 0.0244910 secs] 642036K->330523K(878208K), 0.0247140 secs] [Times: user=0.08 sys=0.00, real=0.02 secs] 657535.473: [GC 657535.473: [ParNew: 331734K->20282K(353920K), 0.0259480 secs] 645147K->333695K(878208K), 0.0261670 secs] [Times: user=0.11 sys=0.00, real=0.02 secs] .... .... 688346.765: [GC [1 CMS-initial-mark: 485248K(524288K)] 515694K(878208K), 0.0343730 secs] [Times: user=0.03 sys=0.00, real=0.04 secs] 688346.800: [CMS-concurrent-mark-start] 688347.964: [CMS-concurrent-mark: 1.083/1.164 secs] [Times: user=2.52 sys=0.09, real=1.16 secs] 688347.964: [CMS-concurrent-preclean-start] 688347.969: [CMS-concurrent-preclean: 0.004/0.005 secs] [Times: user=0.00 sys=0.01, real=0.01 secs] 688347.969: [CMS-concurrent-abortable-preclean-start] CMS: abort preclean due to time 688352.986: [CMS-concurrent-abortable-preclean: 2.351/5.017 secs] [Times: user=3.83 sys=0.38, real=5.01 secs] 688352.987: [GC[YG occupancy: 297806 K (353920 K)]688352.987: [Rescan (parallel) , 0.1815250 secs]688353.169: [weak refs processing, 0.0312660 secs] [1 CMS-remark: 485248K(524288K)] 783055K(878208K), 0.2131580 secs] [Times: user=1.13 sys =0.00, real=0.22 secs] 688353.201: [CMS-concurrent-sweep-start] 688353.903: [CMS-concurrent-sweep: 0.660/0.702 secs] [Times: user=0.91 sys=0.07, real=0.70 secs] 688353.903: [CMS-concurrent-reset-start] 688353.912: [CMS-concurrent-reset: 0.008/0.008 secs] [Times: user=0.01 sys=0.00, real=0.01 secs] 688354.243: [GC 688354.243: [ParNew: 344928K->30151K(353920K), 0.0305020 secs] 681955K->368044K(878208K), 0.0308880 secs] [Times: user=0.15 sys=0.00, real=0.03 secs] .... .... 688943.029: [GC 688943.029: [ParNew: 336531K->17143K(353920K), 0.0237360 secs] 813250K->494327K(878208K), 0.0241260 secs] [Times: user=0.10 sys=0.00, real=0.03 secs] 688950.620: [GC 688950.620: [ParNew: 331767K->22442K(353920K), 0.0344110 secs] 808951K->499996K(878208K), 0.0347690 secs] [Times: user=0.11 sys=0.00, real=0.04 secs] 688956.596: [GC 688956.596: [ParNew: 337064K->37809K(353920K), 0.0488170 secs] 814618K->515896K(878208K), 0.0491550 secs] [Times: user=0.18 sys=0.04, real=0.05 secs] 688961.470: [GC 688961.471: [ParNew (promotion failed): 352433K->332183K(353920K), 0.1862520 secs]688961.657: [CMS I suspect this problem has something to do with the last line in the log (I've added some "...." in order to skip some lines that were not interesting). The fact that the server stayed in the hung state for 2 hours (probably trying to GC and compact the old generation) seems quite strange to me. Also, the gc log stops suddenly with that message and nothing else gets printed any more, probably because the VM Thread gets into some sort of infinite loop (or something that takes 2+ hours).

    Read the article

  • ruby on rails language problem "invalid byte sequence in GBK"

    - by user357203
    This is definitely a language issue, both of our code and our database contains Chinese characters. **This is my environment: About your application's environment Ruby version 1.9.1 (i386-mingw32) RubyGems version 1.3.5 Rack version 1.0 Rails version 2.3.5 Active Record version 2.3.5 Active Resource version 2.3.5 Action Mailer version 2.3.5 Active Support version 2.3.5 Application root C:/path_to_my_root Environment development Database adapter mysql Database schema version 20100327010640 **This is my localhost;3000 after running my ruby server: ArgumentError in HomeController#construction invalid byte sequence in GBK RAILS_ROOT: C:/path_to_my_root Application Trace | Framework Trace | Full Trace C:/Ruby19/lib/ruby/gems/1.9.1/gems/actionpack-2.3.5/lib/action_view/ template_error.rb:43:in `split' C:/Ruby19/lib/ruby/gems/1.9.1/gems/actionpack-2.3.5/lib/action_view/ template_error.rb:43:in `source_extract' C:/Ruby19/lib/ruby/gems/1.9.1/gems/actionpack-2.3.5/lib/action_view/ template_error.rb:86:in `compute_backtrace' C:/Ruby19/lib/ruby/gems/1.9.1/gems/actionpack-2.3.5/lib/action_view/ template_error.rb:11:in `initialize' C:/Ruby19/lib/ruby/gems/1.9.1/gems/actionpack-2.3.5/lib/action_view/ template.rb:212:in `new' C:/Ruby19/lib/ruby/gems/1.9.1/gems/actionpack-2.3.5/lib/action_view/ template.rb:212:in `rescue in render_template' C:/Ruby19/lib/ruby/gems/1.9.1/gems/actionpack-2.3.5/lib/action_view/ template.rb:205:in `render_template' C:/Ruby19/lib/ruby/gems/1.9.1/gems/actionpack-2.3.5/lib/action_view/ base.rb:265:in `render' C:/Ruby19/lib/ruby/gems/1.9.1/gems/actionpack-2.3.5/lib/action_view/ base.rb:352:in `_render_with_layout' C:/Ruby19/lib/ruby/gems/1.9.1/gems/actionpack-2.3.5/lib/action_view/ base.rb:262:in `render' C:/Ruby19/lib/ruby/gems/1.9.1/gems/actionpack-2.3.5/lib/ action_controller/base.rb:1250:in `render_for_file' C:/Ruby19/lib/ruby/gems/1.9.1/gems/actionpack-2.3.5/lib/ action_controller/base.rb:951:in `render' C:/Ruby19/lib/ruby/gems/1.9.1/gems/actionpack-2.3.5/lib/ action_controller/benchmarking.rb:51:in `block in render_with_benchmark' C:/Ruby19/lib/ruby/gems/1.9.1/gems/activesupport-2.3.5/lib/ active_support/core_ext/benchmark.rb:17:in `block in ms' C:/Ruby19/lib/ruby/1.9.1/benchmark.rb:309:in `realtime' C:/Ruby19/lib/ruby/gems/1.9.1/gems/activesupport-2.3.5/lib/ active_support/core_ext/benchmark.rb:17:in `ms' C:/Ruby19/lib/ruby/gems/1.9.1/gems/actionpack-2.3.5/lib/ action_controller/benchmarking.rb:51:in `render_with_benchmark' C:/Ruby19/lib/ruby/gems/1.9.1/gems/actionpack-2.3.5/lib/ action_controller/mime_responds.rb:135:in `block in custom' C:/Ruby19/lib/ruby/gems/1.9.1/gems/actionpack-2.3.5/lib/ action_controller/mime_responds.rb:179:in `call' C:/Ruby19/lib/ruby/gems/1.9.1/gems/actionpack-2.3.5/lib/ action_controller/mime_responds.rb:179:in `block in respond' C:/Ruby19/lib/ruby/gems/1.9.1/gems/actionpack-2.3.5/lib/ action_controller/mime_responds.rb:173:in `each' C:/Ruby19/lib/ruby/gems/1.9.1/gems/actionpack-2.3.5/lib/ action_controller/mime_responds.rb:173:in `respond' C:/Ruby19/lib/ruby/gems/1.9.1/gems/actionpack-2.3.5/lib/ action_controller/mime_responds.rb:107:in `respond_to' C:/Users/Howard/Documents/local/vjoin/app/controllers/ home_controller.rb:53:in `construction' ..... C:/Ruby19/lib/ruby/gems/1.9.1/gems/rack-1.0.1/lib/rack/ methodoverride.rb:24:in `call' C:/Ruby19/lib/ruby/gems/1.9.1/gems/actionpack-2.3.5/lib/ action_controller/params_parser.rb:15:in `call' C:/Ruby19/lib/ruby/gems/1.9.1/gems/actionpack-2.3.5/lib/ action_controller/session/cookie_store.rb:93:in `call' C:/Ruby19/lib/ruby/gems/1.9.1/gems/actionpack-2.3.5/lib/ action_controller/failsafe.rb:26:in `call' C:/Ruby19/lib/ruby/gems/1.9.1/gems/rack-1.0.1/lib/rack/lock.rb:11:in `block in call' :8:in `synchronize' C:/Ruby19/lib/ruby/gems/1.9.1/gems/rack-1.0.1/lib/rack/lock.rb:11:in `call' C:/Ruby19/lib/ruby/gems/1.9.1/gems/actionpack-2.3.5/lib/ action_controller/dispatcher.rb:114:in `block in call' C:/Ruby19/lib/ruby/gems/1.9.1/gems/actionpack-2.3.5/lib/ action_controller/reloader.rb:34:in `run' C:/Ruby19/lib/ruby/gems/1.9.1/gems/actionpack-2.3.5/lib/ action_controller/dispatcher.rb:108:in `call' C:/Ruby19/lib/ruby/gems/1.9.1/gems/rails-2.3.5/lib/rails/rack/ static.rb:31:in `call' C:/Ruby19/lib/ruby/gems/1.9.1/gems/rack-1.0.1/lib/rack/urlmap.rb:46:in `block in call' C:/Ruby19/lib/ruby/gems/1.9.1/gems/rack-1.0.1/lib/rack/urlmap.rb:40:in `each' C:/Ruby19/lib/ruby/gems/1.9.1/gems/rack-1.0.1/lib/rack/urlmap.rb:40:in `call' C:/Ruby19/lib/ruby/gems/1.9.1/gems/rails-2.3.5/lib/rails/rack/ log_tailer.rb:17:in `call' C:/Ruby19/lib/ruby/gems/1.9.1/gems/rack-1.0.1/lib/rack/ content_length.rb:13:in `call' C:/Ruby19/lib/ruby/gems/1.9.1/gems/rack-1.0.1/lib/rack/handler/ webrick.rb:50:in `service' C:/Ruby19/lib/ruby/1.9.1/webrick/httpserver.rb:111:in `service' C:/Ruby19/lib/ruby/1.9.1/webrick/httpserver.rb:70:in `run' C:/Ruby19/lib/ruby/1.9.1/webrick/server.rb:183:in `block in start_thread' Request Parameters: None Show session dump Response Headers: {"Cache-Control"=>"no-cache", "Content-Type"=>"text/html"} **What should I do? I tried to search online, didn't find much. The only thing I found was something like putting the following into application_controller: before_filter :set_charset, :set_locale def set_charset response.headers["Content-Type"] = "text/html; charset=utf-8" WIN32OLE.codepage = WIN32OLE::CP_UTF8 end but this still doesn't work. I am new to ruby on rails, so don't know much about it. Thanks for your help.

    Read the article

  • Allowing connections initiated from outside

    - by Mark S. Rasmussen
    I've got an old Juniper SSG5 running ScreenOS 5.4.0r6.0. Once a day, more or less, it'll start randomly dropping packets at a rate of ~5-10%. We currently solve this issue by simply rebooting the unit, after which it resumes working in perfect condition. As this error has started appearing randomly, without any configuration or hardware changes, I'm assuming I've got an aging unit about to fail. As such, I've got a replacement SSG5 running ScreenOS 6.0. I've dumped the config on the 5.4 and imported it into a clean 6.0, and it seems to gladly accept it, and all my configuration seems to be A-OK. However, upon connecting the new unit, all outside-initiated connections seem to be blocked. If I browse our external IP from the inside, everything works perfectly, and it's not just port 80, SSH, Crashplan - all of our policies route correctly. All normal networking, initiated from the inside, work perfectly as well. If on the other hand I browse our external IP from the outside, everything is blocked. Barring differences between ScreenOS 5.4 and 6.0, the config is identical. Is there a setting somewhere that defines whether outside/inside initiated connections are allowed? unset key protection enable set clock timezone 1 set vrouter trust-vr sharable set vrouter "untrust-vr" exit set vrouter "trust-vr" unset auto-route-export exit set service "MyVOIP_UDP4569" protocol udp src-port 0-65535 dst-port 4569-4569 set service "MyVOIP_TCP22" protocol tcp src-port 0-65535 dst-port 22-22 set service "MyRDP" protocol tcp src-port 0-65535 dst-port 3389-3389 set service "MyRsync" protocol tcp src-port 0-65535 dst-port 873-873 set service "NZ_FTP" protocol tcp src-port 0-65535 dst-port 40000-41000 set service "NZ_FTP" + tcp src-port 0-65535 dst-port 21-21 set service "PPTP-VPN" protocol 47 src-port 2048-2048 dst-port 2048-2048 set service "PPTP-VPN" + tcp src-port 1024-65535 dst-port 1723-1723 set service "NZ_FMS_1935" protocol tcp src-port 0-65535 dst-port 1935-1935 set service "NZ_FMS_1935" + udp src-port 0-65535 dst-port 1935-1935 set service "NZ_FMS_8080" protocol tcp src-port 0-65535 dst-port 8080-8080 set service "CrashPlan Server" protocol tcp src-port 0-65535 dst-port 4280-4280 set service "CrashPlan Console" protocol tcp src-port 0-65535 dst-port 4282-4282 unset alg sip enable set alg appleichat enable unset alg appleichat re-assembly enable set alg sctp enable set auth-server "Local" id 0 set auth-server "Local" server-name "Local" set auth default auth server "Local" set auth radius accounting port 1646 set admin name "netscreen" set admin password "XXX" set admin auth web timeout 10 set admin auth dial-in timeout 3 set admin auth server "Local" set admin format dos set vip multi-port set zone "Trust" vrouter "trust-vr" set zone "Untrust" vrouter "trust-vr" set zone "DMZ" vrouter "trust-vr" set zone "VLAN" vrouter "trust-vr" set zone "Untrust-Tun" vrouter "trust-vr" set zone "Trust" tcp-rst set zone "Untrust" block unset zone "Untrust" tcp-rst set zone "MGT" block unset zone "V1-Trust" tcp-rst unset zone "V1-Untrust" tcp-rst set zone "DMZ" tcp-rst unset zone "V1-DMZ" tcp-rst unset zone "VLAN" tcp-rst set zone "Untrust" screen tear-drop set zone "Untrust" screen syn-flood set zone "Untrust" screen ping-death set zone "Untrust" screen ip-filter-src set zone "Untrust" screen land set zone "V1-Untrust" screen tear-drop set zone "V1-Untrust" screen syn-flood set zone "V1-Untrust" screen ping-death set zone "V1-Untrust" screen ip-filter-src set zone "V1-Untrust" screen land set interface ethernet0/0 phy full 100mb set interface ethernet0/3 phy full 100mb set interface ethernet0/4 phy full 100mb set interface ethernet0/5 phy full 100mb set interface ethernet0/6 phy full 100mb set interface "ethernet0/0" zone "Untrust" set interface "ethernet0/1" zone "Null" set interface "bgroup0" zone "Trust" set interface "bgroup1" zone "Trust" set interface "bgroup2" zone "Trust" set interface bgroup2 port ethernet0/2 set interface bgroup0 port ethernet0/3 set interface bgroup0 port ethernet0/4 set interface bgroup1 port ethernet0/5 set interface bgroup1 port ethernet0/6 unset interface vlan1 ip set interface ethernet0/0 ip 215.173.182.18/29 set interface ethernet0/0 route set interface bgroup0 ip 192.168.1.1/24 set interface bgroup0 nat set interface bgroup1 ip 192.168.2.1/24 set interface bgroup1 nat set interface bgroup2 ip 192.168.3.1/24 set interface bgroup2 nat set interface ethernet0/0 gateway 215.173.182.17 unset interface vlan1 bypass-others-ipsec unset interface vlan1 bypass-non-ip set interface ethernet0/0 ip manageable set interface bgroup0 ip manageable set interface bgroup1 ip manageable set interface bgroup2 ip manageable set interface bgroup0 manage mtrace unset interface bgroup1 manage ssh unset interface bgroup1 manage telnet unset interface bgroup1 manage snmp unset interface bgroup1 manage ssl unset interface bgroup1 manage web unset interface bgroup2 manage ssh unset interface bgroup2 manage telnet unset interface bgroup2 manage snmp unset interface bgroup2 manage ssl unset interface bgroup2 manage web set interface ethernet0/0 vip 215.173.182.19 2048 "PPTP-VPN" 192.168.1.131 set interface ethernet0/0 vip 215.173.182.19 + 4280 "CrashPlan Server" 192.168.1.131 set interface ethernet0/0 vip 215.173.182.19 + 4282 "CrashPlan Console" 192.168.1.131 set interface ethernet0/0 vip 215.173.182.22 22 "MyVOIP_TCP22" 192.168.2.127 set interface ethernet0/0 vip 215.173.182.22 + 4569 "MyVOIP_UDP4569" 192.168.2.127 set interface ethernet0/0 vip 215.173.182.22 + 3389 "MyRDP" 192.168.2.202 set interface ethernet0/0 vip 215.173.182.22 + 873 "MyRsync" 192.168.2.201 set interface ethernet0/0 vip 215.173.182.22 + 80 "HTTP" 192.168.2.202 set interface ethernet0/0 vip 215.173.182.22 + 2048 "PPTP-VPN" 192.168.2.201 set interface ethernet0/0 vip 215.173.182.22 + 8080 "NZ_FMS_8080" 192.168.2.216 set interface ethernet0/0 vip 215.173.182.22 + 1935 "NZ_FMS_1935" 192.168.2.216 set interface bgroup0 dhcp server service set interface bgroup1 dhcp server service set interface bgroup2 dhcp server service set interface bgroup0 dhcp server auto set interface bgroup1 dhcp server auto set interface bgroup2 dhcp server auto set interface bgroup0 dhcp server option domainname companyalan set interface bgroup0 dhcp server option dns1 192.168.1.131 set interface bgroup1 dhcp server option domainname companyblan set interface bgroup1 dhcp server option dns1 192.168.2.202 set interface bgroup2 dhcp server option dns1 8.8.8.8 set interface bgroup2 dhcp server option wins1 8.8.4.4 set interface bgroup0 dhcp server ip 192.168.1.2 to 192.168.1.116 set interface bgroup1 dhcp server ip 192.168.2.2 to 192.168.2.116 set interface bgroup2 dhcp server ip 192.168.3.2 to 192.168.3.126 unset interface bgroup0 dhcp server config next-server-ip unset interface bgroup1 dhcp server config next-server-ip unset interface bgroup2 dhcp server config next-server-ip set interface "ethernet0/0" mip 215.173.182.21 host 192.168.2.202 netmask 255.255.255.255 vr "trust-vr" set interface "serial0/0" modem settings "USR" init "AT&F" set interface "serial0/0" modem settings "USR" active set interface "serial0/0" modem speed 115200 set interface "serial0/0" modem retry 3 set interface "serial0/0" modem interval 10 set interface "serial0/0" modem idle-time 10 set flow tcp-mss unset flow tcp-syn-check unset flow tcp-syn-bit-check set flow reverse-route clear-text prefer set flow reverse-route tunnel always set pki authority default scep mode "auto" set pki x509 default cert-path partial set pki x509 dn name "[email protected]" set dns host dns1 0.0.0.0 set dns host dns2 0.0.0.0 set dns host dns3 0.0.0.0 set address "Trust" "192.168.1.0/24" 192.168.1.0 255.255.255.0 set address "Trust" "192.168.2.0/24" 192.168.2.0 255.255.255.0 set address "Trust" "192.168.3.0/24" 192.168.3.0 255.255.255.0 set crypto-policy exit set ike respond-bad-spi 1 set ike ikev2 ike-sa-soft-lifetime 60 unset ike ikeid-enumeration unset ike dos-protection unset ipsec access-session enable set ipsec access-session maximum 5000 set ipsec access-session upper-threshold 0 set ipsec access-session lower-threshold 0 set ipsec access-session dead-p2-sa-timeout 0 unset ipsec access-session log-error unset ipsec access-session info-exch-connected unset ipsec access-session use-error-log set vrouter "untrust-vr" exit set vrouter "trust-vr" exit set l2tp default ppp-auth chap set url protocol websense exit set policy id 1 from "Trust" to "Untrust" "Any" "Any" "ANY" permit set policy id 1 exit set policy id 2 from "Untrust" to "Trust" "Any" "VIP(215.173.182.19)" "PPTP-VPN" permit traffic set policy id 2 exit set policy id 3 from "Untrust" to "Trust" "Any" "VIP(215.173.182.22)" "HTTP" permit log set policy id 3 set service "MyRDP" set service "MyRsync" set service "MyVOIP_TCP22" set service "MyVOIP_UDP4569" exit set policy id 6 from "Trust" to "Trust" "192.168.1.0/24" "192.168.2.0/24" "ANY" deny set policy id 6 exit set policy id 7 from "Trust" to "Trust" "192.168.2.0/24" "192.168.1.0/24" "ANY" deny set policy id 7 exit set policy id 8 from "Trust" to "Trust" "192.168.3.0/24" "192.168.1.0/24" "ANY" deny set policy id 8 exit set policy id 9 from "Trust" to "Trust" "192.168.3.0/24" "192.168.2.0/24" "ANY" deny set policy id 9 exit set policy id 10 from "Untrust" to "Trust" "Any" "MIP(215.173.182.21)" "NZ_FTP" permit set policy id 10 exit set policy id 11 from "Untrust" to "Trust" "Any" "VIP(215.173.182.22)" "PPTP-VPN" permit set policy id 11 exit set policy id 12 from "Untrust" to "Trust" "Any" "VIP(215.173.182.22)" "NZ_FMS_1935" permit set policy id 12 set service "NZ_FMS_8080" exit set policy id 13 from "Untrust" to "Trust" "Any" "VIP(215.173.182.19)" "CrashPlan Console" permit set policy id 13 set service "CrashPlan Server" exit set nsmgmt bulkcli reboot-timeout 60 set ssh version v2 set config lock timeout 5 unset license-key auto-update set telnet client enable set snmp port listen 161 set snmp port trap 162 set vrouter "untrust-vr" exit set vrouter "trust-vr" unset add-default-route exit set vrouter "untrust-vr" exit set vrouter "trust-vr" exit Note that I've previously posted a similar question (pertaining to the same device & replacement, but ultimately caused by a malfunctioning switch, and thus clouding the current issue): Outbound traffic being blocked for MIP/VIPped servers (Juniper SSG5)

    Read the article

  • How can I connect to a mail server using SMTP over SSL using Python?

    - by jakecar
    Hello, So I have been having a hard time sending email from my school's email address. It is SSL and I could only find this code online by Matt Butcher that works with SSL: import smtplib, socket version = "1.00" all = ['SMTPSSLException', 'SMTP_SSL'] SSMTP_PORT = 465 class SMTPSSLException(smtplib.SMTPException): """Base class for exceptions resulting from SSL negotiation.""" class SMTP_SSL (smtplib.SMTP): """This class provides SSL access to an SMTP server. SMTP over SSL typical listens on port 465. Unlike StartTLS, SMTP over SSL makes an SSL connection before doing a helo/ehlo. All transactions, then, are done over an encrypted channel. This class is a simple subclass of the smtplib.SMTP class that comes with Python. It overrides the connect() method to use an SSL socket, and it overrides the starttles() function to throw an error (you can't do starttls within an SSL session). """ certfile = None keyfile = None def __init__(self, host='', port=0, local_hostname=None, keyfile=None, certfile=None): """Initialize a new SSL SMTP object. If specified, `host' is the name of the remote host to which this object will connect. If specified, `port' specifies the port (on `host') to which this object will connect. `local_hostname' is the name of the localhost. By default, the value of socket.getfqdn() is used. An SMTPConnectError is raised if the SMTP host does not respond correctly. An SMTPSSLError is raised if SSL negotiation fails. Warning: This object uses socket.ssl(), which does not do client-side verification of the server's cert. """ self.certfile = certfile self.keyfile = keyfile smtplib.SMTP.__init__(self, host, port, local_hostname) def connect(self, host='localhost', port=0): """Connect to an SMTP server using SSL. `host' is localhost by default. Port will be set to 465 (the default SSL SMTP port) if no port is specified. If the host name ends with a colon (`:') followed by a number, that suffix will be stripped off and the number interpreted as the port number to use. This will override the `port' parameter. Note: This method is automatically invoked by __init__, if a host is specified during instantiation. """ # MB: Most of this (Except for the socket connection code) is from # the SMTP.connect() method. I changed only the bare minimum for the # sake of compatibility. if not port and (host.find(':') == host.rfind(':')): i = host.rfind(':') if i >= 0: host, port = host[:i], host[i+1:] try: port = int(port) except ValueError: raise socket.error, "nonnumeric port" if not port: port = SSMTP_PORT if self.debuglevel > 0: print>>stderr, 'connect:', (host, port) msg = "getaddrinfo returns an empty list" self.sock = None for res in socket.getaddrinfo(host, port, 0, socket.SOCK_STREAM): af, socktype, proto, canonname, sa = res try: self.sock = socket.socket(af, socktype, proto) if self.debuglevel > 0: print>>stderr, 'connect:', (host, port) self.sock.connect(sa) # MB: Make the SSL connection. sslobj = socket.ssl(self.sock, self.keyfile, self.certfile) except socket.error, msg: if self.debuglevel > 0: print>>stderr, 'connect fail:', (host, port) if self.sock: self.sock.close() self.sock = None continue break if not self.sock: raise socket.error, msg # MB: Now set up fake socket and fake file classes. # Thanks to the design of smtplib, this is all we need to do # to get SSL working with all other methods. self.sock = smtplib.SSLFakeSocket(self.sock, sslobj) self.file = smtplib.SSLFakeFile(sslobj); (code, msg) = self.getreply() if self.debuglevel > 0: print>>stderr, "connect:", msg return (code, msg) def setkeyfile(self, keyfile): """Set the absolute path to a file containing a private key. This method will only be effective if it is called before connect(). This key will be used to make the SSL connection.""" self.keyfile = keyfile def setcertfile(self, certfile): """Set the absolute path to a file containing a x.509 certificate. This method will only be effective if it is called before connect(). This certificate will be used to make the SSL connection.""" self.certfile = certfile def starttls(): """Raises an exception. You cannot do StartTLS inside of an ssl session. Calling starttls() will return an SMTPSSLException""" raise SMTPSSLException, "Cannot perform StartTLS within SSL session." And then my code: import ssmtplib conn = ssmtplib.SMTP_SSL('HOST') conn.login('USERNAME','PW') conn.ehlo() conn.sendmail('FROM_EMAIL', 'TO_EMAIL', "MESSAGE") conn.close() And got this error: /Users/Jake/Desktop/Beth's Program/ssmtplib.py:116: DeprecationWarning: socket.ssl() is deprecated. Use ssl.wrap_socket() instead. sslobj = socket.ssl(self.sock, self.keyfile, self.certfile) Traceback (most recent call last): File "emailer.py", line 5, in conn = ssmtplib.SMTP_SSL('HOST') File "/Users/Jake/Desktop/Beth's Program/ssmtplib.py", line 79, in init smtplib.SMTP.init(self, host, port, local_hostname) File "/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/smtplib.py", line 239, in init (code, msg) = self.connect(host, port) File "/Users/Jake/Desktop/Beth's Program/ssmtplib.py", line 131, in connect self.sock = smtplib.SSLFakeSocket(self.sock, sslobj) AttributeError: 'module' object has no attribute 'SSLFakeSocket' Thank you!

    Read the article

  • File Access problems with SLES 10 SP2 OES2 SP1

    - by Blackhawk131
    We have identified a couple of repeatable, demonstrable scenarios with unexplained rejected folder access on our servers for Mac users. Hopefully, this can be presented to Novell for a solution. What we did to demonstrate scenario 1; 1. setup a PC and Mac side-by-side 2. login to our server and open up to a central location on both Mac and PC 3. on the PC in that central location create a folder 4. on the Mac in that central location drag the created folder to the Mac desktop, this should work fine, no problem 5. on the PC rename that folder 6. on the Mac drag a file to that renamed folder, this should error with the following message; a. You cannot copy some of these items to the destination because their names are too long for the destination. Do you want to skip copying these items and continue copying the other items? b. Select skip, response is the filename is copied to the location with zero or small byte size. Try opening it and you get file is corrupted error message. What we did to demonstrate scenario 2; 1. setup a PC and Mac side-by-side 2. login to our server and open up to a central location on both Mac and PC 3. on the PC in that central location create a folder then create a subfolder 4. copy some content into the subfolder 5. on the Mac in that central location drag the created top level folder to the Mac desktop, this should work fine, no problem 6. on the PC rename that subfolder 7. on the Mac drag that top level folder to the Mac desktop, this should error on the Mac with the following; a. The operation cannot be completed because you do not have sufficient privileges for b. The operation cannot be completed because you do not have sufficient privileges for 8. on the Mac, if you open that subfolder you can see the file copied in step 4 above but, you can not open that file, you get the following message if you try; a. There was an error opening this document. You do not have permission to open this file. 9. on the PC drag some content into the top level folder 10. on the Mac you can open that file directly from the server or copy it locally, no problem, however-the subfolder is still corrupted or locked, whichever 11. on the PC rename the top level folder 12. on the Mac that same file just opened in step 10 above is now not accessible, get the following message; a. The document could not be opened. I have observed some variances in the above. For instance, a change on the PC side may take a moment before you can observer or act on the Mac side - kind of like the server is slow to respond. Also, the error message may vary. However, the key is once a folder, or subfolder, gets renamed by a PC, Mac problems commence. The solution is to create a new folder from a PC and copy the contents of the corrupted folder to the new folder and not rename the folder name. This has to be done on a PC because the corrupted folder is not accessible by a Mac user. Another problem that dovetails with the above is that we know certain characters are not allowed for PC folder or filenames. If a Mac user creates a folder with a slash in the file name, from the PC the user does not see that slash in the name. As soon as the PC user copies a file to that folder, the Mac user is locked from that folder. Will get the following error message; - Sorry, the operation could not be completed because an unexpected error occurred. - (Error code - 50) In addition to the above mentioned character issue with folders, the problem is more evil with filenames. If, for example, you create a file with a slash in the filename on a Mac and copy it to the server you will get the following error message; - You cannot copy some of these items to the destination because their names are too long for the destination. Do you want to skip copying these items and continue copying the other items? Select either Stop or Skip buttons. It does not matter which button is selected. The file name gets copied to the destination location at a reduced size. Depending on the file type, the icon associated with the file may or may not be present. Furthermore, if you open that file on the server you will get the following message; - Couldnt open the file. It may be corrupt or a file format that doesnt recognize. From the users perspective, if they are not observant of the icon or file size, they may disregard the error message and think their file has copied as intended. Only later do they discover the file is corrupt if they open that file. I want to make a note on this problem. It is the PC causing the issue. You can change folder and file names all day on a MAC and you don't have a problem as long as a character is not the issue. Once you change the file name or folder name from a PC the entire folder structure from that level down is corrupted. But it has to be resolved from a PC by creating a new folder and copying the contents to the new folder like stated above. Is something not configured correctly? SUSE Linux Enterprise Server 10 (x86_64) VERSION = 10 PATCHLEVEL = 2 LSB_VERSION="core-2.0-noarch:core-3.0-noarch:core-2.0-x86_64:core-3.0-x86_64" Novell Open Enterprise Server 2.0.1 (x86_64) VERSION = 2.0.1 PATCHLEVEL = 1 BUILD Note: We use Novell clients on all windows systems to connect to the servers for file access and network storage. We use AFP to allow OSx systems to connect to servers.

    Read the article

  • Optimize php-fpm and varnish for a powerfull server

    - by Jim
    My setup is: Intel® Core™ i7-2600 and RAM 16 GB DDR3 RAM varnish+nginx+php-fpm+apc for a not very heavy WordPress blog with W3 Total Cache and CDN My problem is that after 55 hits per second according to blitz.io varnish starts giving out timeouts. CPU usage at this time is hardly 1%. Free memory at all time remains 10GB+. I tried benchmarking php-fpm directly with result of 150hits/s without any timeouts. But after that the CPU usage goes 100% and it stops responding. Can you help me optimize it to handle more? As i understand nginx has nothing to do over here so i dont put its config. php-fpm config listen = /tmp/php5-fpm.sock listen.allowed_clients = 127.0.0.1 user = nginx group = nginx pm = dynamic pm.max_children = 150 pm.start_servers = 7 pm.min_spare_servers = 2 pm.max_spare_servers = 15 pm.max_requests = 500 slowlog = /var/log/php-fpm/www-slow.log php_admin_value[error_log] = /var/log/php-fpm/www-error.log php_admin_flag[log_errors] = on apc extension = apc.so apc.enabled=1 apc.shm_size=512MB apc.num_files_hint=0 apc.user_entries_hint=0 apc.ttl=7200 apc.use_request_time=1 apc.user_ttl=7200 apc.gc_ttl=3600 apc.cache_by_default=1 apc.filters apc.mmap_file_mask=/tmp/apc.XXXXXX apc.file_update_protection=2 apc.enable_cli=0 apc.max_file_size=1M apc.stat=1 apc.stat_ctime=0 apc.canonicalize=0 apc.write_lock=1 apc.report_autofilter=0 apc.rfc1867=0 apc.rfc1867_prefix =upload_ apc.rfc1867_name=APC_UPLOAD_PROGRESS apc.rfc1867_freq=0 apc.rfc1867_ttl=3600 apc.include_once_override=0 apc.lazy_classes=0 apc.lazy_functions=0 apc.coredump_unmap=0 apc.file_md5=0 apc.preload_path Varnish VCL backend default { .host = "127.0.0.1"; .port = "8080"; .connect_timeout = 6s; .first_byte_timeout = 6s; .between_bytes_timeout = 60s; } acl purgehosts { "localhost"; "127.0.0.1"; } # Called after a document has been successfully retrieved from the backend. sub vcl_fetch { # Uncomment to make the default cache "time to live" is 5 minutes, handy # but it may cache stale pages unless purged. (TODO) # By default Varnish will use the headers sent to it by Apache (the backend server) # to figure out the correct TTL. # WP Super Cache sends a TTL of 3 seconds, set in wp-content/cache/.htaccess set beresp.ttl = 24h; # Strip cookies for static files and set a long cache expiry time. if (req.url ~ "\.(jpg|jpeg|gif|png|ico|css|zip|tgz|gz|rar|bz2|pdf|txt|tar|wav|bmp|rtf|js|flv|swf|html|htm)$") { unset beresp.http.set-cookie; set beresp.ttl = 24h; } # If WordPress cookies found then page is not cacheable if (req.http.Cookie ~"(wp-postpass|wordpress_logged_in|comment_author_)") { # set beresp.cacheable = false;#versions less than 3 #beresp.ttl>0 is cacheable so 0 will not be cached set beresp.ttl = 0s; } else { #set beresp.cacheable = true; set beresp.ttl=24h;#cache for 24hrs } # Varnish determined the object was not cacheable #if ttl is not > 0 seconds then it is cachebale if (!beresp.ttl > 0s) { # set beresp.http.X-Cacheable = "NO:Not Cacheable"; } else if ( req.http.Cookie ~"(wp-postpass|wordpress_logged_in|comment_author_)" ) { # You don't wish to cache content for logged in users set beresp.http.X-Cacheable = "NO:Got Session"; return(hit_for_pass); #previously just pass but changed in v3+ } else if ( beresp.http.Cache-Control ~ "private") { # You are respecting the Cache-Control=private header from the backend set beresp.http.X-Cacheable = "NO:Cache-Control=private"; return(hit_for_pass); } else if ( beresp.ttl < 1s ) { # You are extending the lifetime of the object artificially set beresp.ttl = 300s; set beresp.grace = 300s; set beresp.http.X-Cacheable = "YES:Forced"; } else { # Varnish determined the object was cacheable set beresp.http.X-Cacheable = "YES"; if (beresp.status == 404 || beresp.status >= 500) { set beresp.ttl = 0s; } # Deliver the content return(deliver); } sub vcl_hash { # Each cached page has to be identified by a key that unlocks it. # Add the browser cookie only if a WordPress cookie found. if ( req.http.Cookie ~"(wp-postpass|wordpress_logged_in|comment_author_)" ) { #set req.hash += req.http.Cookie; hash_data(req.http.Cookie); } } # vcl_recv is called whenever a request is received sub vcl_recv { # remove ?ver=xxxxx strings from urls so css and js files are cached. # Watch out when upgrading WordPress, need to restart Varnish or flush cache. set req.url = regsub(req.url, "\?ver=.*$", ""); # Remove "replytocom" from requests to make caching better. set req.url = regsub(req.url, "\?replytocom=.*$", ""); remove req.http.X-Forwarded-For; set req.http.X-Forwarded-For = client.ip; # Exclude this site because it breaks if cached if ( req.http.host == "sr.ituts.gr" ) { return( pass ); } # Serve objects up to 2 minutes past their expiry if the backend is slow to respond. set req.grace = 120s; # Strip cookies for static files: if (req.url ~ "\.(jpg|jpeg|gif|png|ico|css|zip|tgz|gz|rar|bz2|pdf|txt|tar|wav|bmp|rtf|js|flv|swf|html|htm)$") { unset req.http.Cookie; return(lookup); } # Remove has_js and Google Analytics __* cookies. set req.http.Cookie = regsuball(req.http.Cookie, "(^|;\s*)(__[a-z]+|has_js)=[^;]*", ""); # Remove a ";" prefix, if present. set req.http.Cookie = regsub(req.http.Cookie, "^;\s*", ""); # Remove empty cookies. if (req.http.Cookie ~ "^\s*$") { unset req.http.Cookie; } if (req.request == "PURGE") { if (!client.ip ~ purgehosts) { error 405 "Not allowed."; } #previous version ban() was purge() ban("req.url ~ " + req.url + " && req.http.host == " + req.http.host); error 200 "Purged."; } # Pass anything other than GET and HEAD directly. if (req.request != "GET" && req.request != "HEAD") { return( pass ); } /* We only deal with GET and HEAD by default */ # remove cookies for comments cookie to make caching better. set req.http.cookie = regsub(req.http.cookie, "1231111111111111122222222333333=[^;]+(; )?", ""); # never cache the admin pages, or the server-status page, or your feed? you may want to..i don't if (req.request == "GET" && (req.url ~ "(wp-admin|bb-admin|server-status|feed)")) { return(pipe); } # don't cache authenticated sessions if (req.http.Cookie && req.http.Cookie ~ "(wordpress_|PHPSESSID)") { return(lookup); } # don't cache ajax requests if(req.http.X-Requested-With == "XMLHttpRequest" || req.url ~ "nocache" || req.url ~ "(control.php|wp-comments-post.php|wp-login.php|bb-login.php|bb-reset-password.php|register.php)") { return (pass); } return( lookup ); } Varnish Daemon options DAEMON_OPTS="-a :80 \ -T 127.0.0.1:6082 \ -f /etc/varnish/ituts.vcl \ -u varnish -g varnish \ -S /etc/varnish/secret \ -p thread_pool_add_delay=2 \ -p thread_pools=8 \ -p thread_pool_min=100 \ -p thread_pool_max=1000 \ -p session_linger=50 \ -p session_max=150000 \ -p sess_workspace=262144 \ -s malloc,5G" Im not sure where to start, should i for start optimize php-fpm and then go to varnish or php-fpm is at its max right now so i should start looking for the problem in varnish?

    Read the article

  • Rails: Need a helping hand to finish this Jquery/Ajax problem.

    - by DJTripleThreat
    Here's my problem: I have a combo box that when its index changes I want a div tag with the id="services" to repopulate with checkboxes based on that comboboxes value. I want this to be done using ajax. This is my first time working with ajax for rails so I need a helping hand. Here is what I have so far: My application.js file. Something that Ryan uses in one of his railscasts. This is supposed to be a helper method for handling ajax requests. Is this useful? Should I be using this?: //<![CDATA[ $.ajaxSetup({ 'beforeSend': function(xhr) {xhr.setRequestHeader("Accept","text/javascript")} }); // This function doesn't return any results. How might I change that? Or // should I have another function to do that? $.fn.submitWithAjax = function() { this.submit(function() { $.post($(this).attr("action"), $(this).serialize(), null, "script"); return true; }); }; //]]> An external javascript file for this template (/public/javascripts/combo_box.js): //<![CDATA[ $(document).ready(function(){ $('#event_service_time_allotment').change(function () { // maybe I should be using submitWithAjax(); ?? $(this).parent().submit(); }); }); //]]> My ???.js.erb file. I'm not sure where this file should go. Should I make an ajax controller?? Someone help me out with that part please. I can write this code no problem, I just need to know where it should go and what the file name should be called (best practices etc): // new.js.erb: dynamic choices... expecting a time_allotment alert('test'); // TODO: Return a json object or something with a result set of services // I should be expecting something like: // params[:event_service][:time_allotment] i think which I should use // to return a json object (??) to be parsed or rendered html // for the div#services. Here is my controller's new action. Am I supposed to respond to javascript here? Should I make an ajax controller instead? What's the best way to do this?: # /app/controllers/event_services_controller.rb def new @event_service = EventService.new respond_to do |format| format.html # new.html.erb format.xml { render :xml => @event_service } format.js # should I have a javascript handler here? i'm lost! end end My /app/views/event_service/new.html.erb. My ajax call I think should be a different action then the form: <% content_for :head do %> <%= javascript_include_tag '/javascripts/combo_box.js' %> <% end %> <% form_for @event_service, :url => admin_events_path, :html => {:method => :post} do |f| %> <!-- TimeAllotment is a tabless model which is why this is done like so... --> <!-- This select produces an id of: "event_service_time_allotment" and a name of: "event_service[time_allotment]" --> <%= select("event_service", "time_allotment", TimeAllotment.all.collect {|ta| [ta.title, ta.value]}, {:prompt => true}) %> Services: <!-- this div right here needs to be repopulated when the above select changes. --> <div id="services"> <% for service_type in ServiceType.all %> <div> <%= check_box_tag "event_service[service_type_ids][]", service_type.id, false %> <%=h service_type.title %> </div> <% end %> </div> <% end %> ok so right now ALL of the services are there to be chosen from. I want them to change based on what is selected in the combobox event_service_time_allotment. Thanks, I know this is super complicated so any helpful answers will get an upvote.

    Read the article

  • Unexpected $end...

    - by Jason
    I keep getting a error - Parse error: syntax error, unexpected $end in ... on line 75, but everything looks fine to me. <?php get_header(); ?> <div id="content-top"> <div class="title"> <h2>Welcome!</h2> </div> </div> <div id="content"> <div class="contentbox"> <?php get_sidebar(); ?> <?php if (have_posts()) : ?> <?php if (have_posts()) : while (have_posts()) : the_post(); ?> <div class="post" id="post-<?php the_ID(); ?>"> <h2><a href="<?php echo get_permalink($post->post_parent); ?>" rev="attachment"><?php echo get_the_title($post->post_parent); ?></a> &raquo; <?php the_title(); ?></h2> <div class="entry"> <p class="attachment"><a href="<?php echo wp_get_attachment_url($post->ID); ?>"><?php echo wp_get_attachment_image( $post->ID, 'medium' ); ?></a></p> <div class="caption"><?php if ( !empty($post->post_excerpt) ) the_excerpt(); // this is the "caption" ?></div> <?php the_content('<p class="serif">Read the rest of this entry &raquo;</p>'); ?> <div class="navigation"> <div class="alignleft"><?php previous_image_link() ?></div> <div class="alignright"><?php next_image_link() ?></div> </div> <br class="clear" /> <p class="postmetadata alt"> <small> This entry was posted on <?php the_time('l, F jS, Y') ?> at <?php the_time() ?> and is filed under <?php the_category(', ') ?>. <?php the_taxonomies(); ?> You can follow any responses to this entry through the <?php post_comments_feed_link('RSS 2.0'); ?> feed. <?php if (('open' == $post-> comment_status) && ('open' == $post->ping_status)) { // Both Comments and Pings are open ?> You can <a href="#respond">leave a response</a>, or <a href="<?php trackback_url(); ?>" rel="trackback">trackback</a> from your own site. <?php } elseif (!('open' == $post-> comment_status) && ('open' == $post->ping_status)) { // Only Pings are Open ?> Responses are currently closed, but you can <a href="<?php trackback_url(); ?> " rel="trackback">trackback</a> from your own site. <?php } elseif (('open' == $post-> comment_status) && !('open' == $post->ping_status)) { // Comments are open, Pings are not ?> You can skip to the end and leave a response. Pinging is currently not allowed. <?php } elseif (!('open' == $post-> comment_status) && !('open' == $post->ping_status)) { // Neither Comments, nor Pings are open ?> Both comments and pings are currently closed. <?php } edit_post_link('Edit this entry.','',''); ?> </small> </p> </div> </div> <?php comments_template(); ?> <?php endwhile; else: ?> <p>Sorry, no attachments matched your criteria.</p> <?php endif; ?> <div class="clear"></div> </div> </div>

    Read the article

< Previous Page | 63 64 65 66 67 68 69  | Next Page >