Search Results

Search found 18773 results on 751 pages for 'router configuration'.

Page 67/751 | < Previous Page | 63 64 65 66 67 68 69 70 71 72 73 74  | Next Page >

• Can't connect to Internet through WiFi, but can with cable

  - by aldy505

  I'm using Windows 7 32-bit, Toshiba Portege laptop. I want to connect to the WiFi, usually I can do that easily. But, I don't know.. maybe when I tried to install a Microsoft Research: Mesh Virtual WiFi that could connect more than 2 wireless networks. I wanna try in connecting both Wireless router and my personal Ad-Hoc. Now, my laptop don't recognize my WiFi, well, I can connect to the WiFi but it says: "Limited access" and doesn't really connect to the internet. But when I plug the LAN cable, it works. I know the problem is in the laptop's wireless connection or in the properties. Any help for this? UPDATE: The IP and DNS settings, I set to automatic, and when I ran diagnostic, Windows tells me that the wireless network adapter is the problem, but they told me to insert the LAN cable, so how to fix the wireless? They didn't tell me how to fix that.

  Read the article

• Domain controller in cloud, how do we set up local BDC

  - by brian b

  We have a domain controller (exchange box) hosted at our hosting provider. We need to set up a local domain controller so we do a VPN and local authentication tasks. I can make the PDC accept all connections from our Office IP. How do I get the office router to correctly allow two way communications between the PDC (cloud) and the local DC. Is there a list of ports I need to pass through to the local DC? Thanks! "PDC" and "BDC" used for clarity--I know that the concept is obsolete.

  Read the article

• QNAP TS-419p as a VPN Gateway?

  - by heisenberg

  Hello, I am hoping one of you might be able to help. I want to make files stored on shared folders on a QNAP TS-409p available to users over a VPN link. How is the possible? Can someone explain what I need to do. What do I need to do at the router and what do I need to do on the QNAP NAS? Effectively, what I want do do is use the built in Windows vpn client to connect to my home network and then be able to browse the shared folders. Thanks in advance.

  Read the article

• Netgear WNDR3700 2.4GHz and 5GHz Wi-Fi are segregated

  - by Tim Sullivan

  I have a Netgear WNDR3700 with both the 2.4GHz (B/G/N) and 5GHz (A/N) broadcasting. I'd assumed that devices connecting on either channel would work together without issues, but there are some devices (such as my iPhone 4 or HP wireless printer) that will only connect at 2.4GHz, and some that connect at 5GHz. However, it seems that they're segregated on the network, so a computer at 5GHz can't print to the printer, but the iPhone can. This is causing issues not just with printing, but with AppleTV and so on. Is there a way to have the router let these devices all talk to each other?

  Read the article

• DNS issues on my iPhone

  - by mattalexx

  I'm trying to call up "https://m.google.com" on my iPhone on my home WiFi. It's saying Safari "cannot verify server identity" of m.google.com, then when I press Details, it refers to https://m.google.com as "mattserver". "mattserver" is the name of my development server, a Linux box on my home network. This stinks of DNS issues to me. Accessing the unsecure version of that URL ("http://m.google.com") gives me a blank page. What could be going on here? Is there a way to look at the logs of my router somehow?

  Read the article

• ubuntu server refusing connections via port forwarding

  - by Matt

  Getting some really weird behavior from our Ubuntu server... it's behind a Verizon router firewall with port forwarding (port 8080 to port 80 on the server), and we've been having issues accessing it via this external IP. From within the network, it appears to respond normally (I can access it via web browser and SSH), but refuses connections through port forwarding (using our static external IP). The strangest thing is that it actually responds to external port-forwarded connections right after being restarted, but quickly lapses back into this pattern of refusing external connections. I'm a bit of a server newbie (I'm actually a programmer in a small startup that just lost their server ops guy, urgh) so this is all trial by fire for me. Does anyone have any advice on what could be going wrong here? Any help would be appreciated, thanks.

  Read the article

• Cant connect to home server

  - by user52141

  Trying to figure out what I might be doing wrong. I installed XAMPP - and everything looks fine. If I go to localhost everything comes right up. But when I go to my IP address, I just get a message that the browser could not connect to it. I go into my router and set up port forwarding for port 80 etc, and I even tried putting the server as a DMZ - still nothing. I turned the firewall off to see if that was interfering in some way, then uninstalled it completely for good measure, made no difference. I'm out of ideas.. oh, and yes I have a static IP address.

  Read the article

• Speeding up ping

  - by sam

  We have pretty slow internet which makes working online quite tedious some times the internet is just generally slow, 600ms ping, 0.90mb download. (we are in Londnon, can you beleive). But other times the internet download speed is ok 5-8mb but the ping in 600ms is there a way we can speed this up. Good performance would be 5-10mb 30ms ping at our location, which we sometimes get in the morning. Resetting the router always seem to solve the ping issue for about 10 minutes but then it slows down again, any idea whats governing the ping and if anything can be done to address it ?

  Read the article

• monitor internet bandwidth on LAN

  - by Dimal Chandrasiri

  I'm on a office network and there are around 12 PCs that are connected to a switch and then to a Prolink Router. Now the Internet connection is very slow and I'm the one who manage all the computers. I want to monitor bandwidth usage of each computer on the LAN. how can I achieve this using my computer. I cannot install any software on the client computers other than mine. I tried wireshark but, it only shows my network usage so there is no use with the data I get from it. Is there any specific software that I can use within my PC to get the bandwidth details of other computers. I'm on a windows 7 x64bit PC with admin privileges. Thank you.

  Read the article

• Wifi Signal Strengths

  - by Phorce

  I hope that I have asked this question in the right topic. Basically I use BT (In the U.K.) and I have problems with my router receiving a strong signal in certain rooms of the house, which, therefore makes the internet really slow in some cases it won't work at all. I have had experience working with Virgin Media (UK) before and just changed the channel number and this worked fine, but, do not know if I would receive the same outcome on BT. Could anyone suggest any other things that I could try alongside of the channel change in order to /hopefully/ get a stronger signal, without having to install Ethernet cable?

  Read the article

• Server over VPN?

  - by zib_redlektab

  I don't know that much about VPN, so it could be that this is utterly impossible. Here's hoping, though. I would like to forward a port from my router to a machine connected to the network via VPN. That way, I could run a simple server on my laptop, and it would continue to work at the same address no matter where I am. The trick is that I don't want people connecting to the server to have to join the VPN. It should be completely transparent to the end-user. If it's not possible with VPN, is there some other technology that would make this possible? Basically just forwarding a port to a remote machine, one without a static IP.

  Read the article

• Problem in reading configuration file from Class library project

  - by Newbie

  If I create an app.config file in a console apps like this <?xml version="1.0" encoding="utf-8" ?> <configuration> <appSettings> <add key ="key1" value ="val1"/> </appSettings> </configuration> and access the same from the console application like object sourcePath = System.Configuration.ConfigurationManager.AppSettings["key1"]; or by object sourcePath = System.Configuration.ConfigurationSettings.AppSettings["key1"]; I am able to get the value. But if I do the same thing in a class library project, I am getting a null value. Why? Where I am making mistake? I have added the proper reference System.Configuration. I am using C# 3.0

  Read the article

• Zend Framework subdomain+subfolder router rewrite problem

  - by zf_novice

  I'm new to Zend Framwork and this is an issue I've been struggling for several hours already... I'm trying to chain Hostname and standard Route in order to get url with subdomain+subfolders ie.: http:// lang.mydomain.com/myapplication/public/controller http:// lang.mydomain.com/myapplication/public/controller/action (sorry for the empty space in the address, this site won't allow links) Basically what I have done in Bootstrap is: // add language to default route $routePath = new Zend_Controller_Router_Route( ':controller/:action/*', array('controller'=>'index','action' => 'index','module'=>'default') ); $routeHostname = new Zend_Controller_Router_Route_Hostname( ':lang.mydomain.com', array('lang'=>$lang) ); $frontController = $this->getResource('FrontController'); $router = $frontController->getRouter(); $router->addRoute('default', $routeHostname->chain($routePath)) $frontController->setRouter($router); it finds the route ok, but every time I generate url in view or layout by $this-url() <?php echo $this->url( array( 'controller'=> 'guestbook', 'action' => 'sign', 'lang' => Zend_Registry::get('lang'), ), 'default', true) ?>"> I get http:// lang.mydomain.com/controller instead of http:// lang.mydomain.com/myapplication/public/controller I've been trying to set baseUrl on front controller but no luck... Also I've tried the static route with myapplication/public or following standard route: 'myapplication/public/:controller/:action/*' - it result with "An error occurred Page not found Exception information: Message: No route matched the request" and empty request Is there any way to assembly subdomain with subfolder in Zend Framwork?? EDIT: I changed above to: $frontController->setBaseUrl('.'); // add language to default route $routePath = new Zend_Controller_Router_Route( 'quickstart/public/:controller/:action/*', array( 'controller'=>'index', 'action' => 'index', 'module'=>'default', ) ); and it works form me, although I'm not sure whether it's been correct approach...

  Read the article

• How to configure D-Link DSL-2320B modem for att.com

  - by C.W.Holeman II

  How to configure new D-Link DSL-2320B modem replacing Motorola modem that needs two ice pack to operate. Wireless router is D-Link DIR-655. Am able to talk to the modem 192.168.1.1 and the router 192.168.0.1 via wireless. Account with att.com.

  Read the article

• Static DHCP!?

  - by voyager

  I've found some home wireless routers/ADSL+ modems (ZyXEL 660) talking about Static DHCP, when refering to assosiating a specific MAC to an IP, but still serve the configuration over DHCP. Doesn't this have another name? What does Cisco call this feature (that I know supports because I've used long time ago)?

  Read the article

• Looking for a fiber optic "switch" or "router" for home use

  - by Shrout1

  The gist of my question: What is a "fiber optic" switch called? I.E. a layer 2 ethernet switch that uses fiber TX and RX connections and sends layer 2 network traffic between the fiber strands that are connected. Can someone purchase a dedicated fiber switch that does not have copper ethernet ports? What is the current average price of a device like this? Not necessarily looking for product endorsements, just information Might not make sense to go this route if it is too cost prohibitive What type of fiber connector is used for terminating a fiber strand into a jack on the wall? Can fiber be "patched" using two jacks and a "patch" cable? Is signal loss a concern with the longest runs at 100-200ft, a patch cable and media converters? The full story: My parents had unterminated fiber optic cable and terminated Cat5e run throughout their home when it was built in 2004. 10 years later the Cat5e isn't providing the throughput that my father needs to accomplish multiple streams of HD and fast system backups throughout the house. He can't reach gigabit speeds across the distance of the Cat5e runs. We are both interested in terminating the fiber connections and using them as high speed "backbones" to copper switches in each room of the house. It would be easy to attain gigabit speeds (or better, eventually) using the fiber. I have searched and searched for a "fiber optic switch" or "fiber optic router" and cannot find the correct term to describe this piece of hardware. We can use fiber media converters at the end points of each connection, however it would be nice to have a "patch panel" set up in the network closet in the basement that has fiber connections on it and switches the ethernet streams between the connections/systems in the house. Each fiber media converter costs between $50-$100 a piece... After 10 or so terminated connections it might make sense to find a piece of hardware that does not require media converters. That would depend upon the cost of this hardware Somewhat unrelated, if we are able to route between these fiber strands successfully, what is the physical connector type used in a jack on the wall? Just like RJ45 has a wall outlet (depicted below): What is the fiber optic equivalent of this? In the interim could we "patch" a couple fiber strands together in the network closet? Would signal loss be of concern with a run length of 100-200 feet, a patch cable and two media converters? If that would work then it could be used until the funds are available for more.

  Read the article

• Configuring Windows 2003 As A Router

  - by Sean M

  I am trying to configure a Windows 2003 server to act as a router, so that the two subnetworks that I'm dealing with can communicate with one another without NAT. I am mostly sure that I have configured Windows 2003 incorrectly, and I'm finding it very difficult to drill down through Google results to something helpful. I have a 192.168.1.0/24 network that is my "production" network (in the sense that I'm in trouble if I screw it up) and a 10.0.0.0/8 network that is my test network. The 192.168.1.0 network is ruled by a gateway whose routing table looks like this (my address redacted): The Windows 2003 server, "prime," is multihomed. Its network adapters are at 192.168.1.122, (as seen above), 10.0.0.1, and 10.0.0.2. I added the Routing and Remote Access role to it, and enabled LAN routing. I do not have it using RIP or other routing protocols. Its current routing table is shown below. To me, it looks like all of the right routes are there for traffic to pass between the 192.168.1.0 network and the 10.0.0.0 network. However, traffic does not pass. The 10.0.0.11 and .12 clients cannot be contacted from the 192.168.1.0 network. When I use traceroute to try to get to them, the trace gets to the Windows 2003 server's 192.168.1.122 address, then produces nothing but "* * *" timeouts. When I try to traceroute to 192.168.1.1 from a 10.0.0.0-network client, I get "destination host unreachable." However, I know that the routing is working at least a little, because from the 192.168.1.0 network, I can connect to the Windows server just fine by referring to it as 10.0.0.1. What static routes would allow me to contact 10.0.0.11 and .12 from the 192.168.1.0 network? Is it possible to tell the Windows server "since you are a DHCP/DNS server, you already know routes to get to machines that are getting IP addresses from you, please add those to your routing table" ? Will using RIP or OSPF on the Windows server actually be helpful in this situation?

  Read the article

• dd-wrt router firmware QoS troubleshooting

  - by Jeff Atwood

  I've been using the dd-wrt firmware on my router and I like it a lot! But -- I'm not sure the quality of service (QoS) is working on it. I have it set up as follows: http, port 80 -- Premium bittorrent, port 6969 -- Bulk https, port 443 -- Premium dns, port 53 -- Premium Per the QoS documentation, these levels are: bandwidth is allocated based on the following percentages of uplink and downlink values for each class: Exempt: 100mbps - ignores global limits. Premium: 75% - 100% Express: 15% - 100% Standard: 10% - 100% Bulk: 1.5% - 100% This doesn't entirely seem to work, though -- with busy torrents going I get major pauses in my web browsing which sucks! The QoS documentation gives some steps to check the QoS ... What you'll be interested to look at will be the first set of source and destination IP, including the port numbers. Next the presence of l7proto and the "mark" field. The entries indicate the current live connection QoS priority applied on them based on the "mark" field. The "mark" values correspond to the following Exempt: 100 Premium: 10 Express: 20 Standard: 30 Bulk: 40 (no QoS matched): 0 You may see "mark=0" for some l7proto service even though they are in configured in the list of QoS rules. This may mean that the layer 7 pattern matching system didn't match a new or changed header for that protocol. Custom service on port matches will usually take care of these. On port 6969 (bittorrent) I see a weird mixture of stuff with mark=0 and mark=40 like so cat /proc/net/ip_conntrack udp 17 105 src=98.162.182.42 dst=1.2.3.4 sport=64512 dport=6969 packets=3 bytes=290 src=10.0.0.2 dst=98.162.182.42 sport=6969 dport=64512 packets=4 bytes=202 [ASSURED] mark=0 secmark=0 use=1 tcp 6 117 TIME_WAIT src=98.248.173.174 dst=1.2.3.4 sport=51114 dport=6969 packets=12 bytes=704 src=10.0.0.2 dst=98.248.173.174 sport=6969 dport=51114 packets=10 bytes=440 [ASSURED] mark=40 secmark=0 use=1 tcp 6 598 ESTABLISHED src=165.132.128.201 dst=1.2.3.4 sport=57218 dport=6969 packets=8024 bytes=9919881 src=10.0.0.2 dst=165.132.128.201 sport=6969 dport=57218 packets=4211 bytes=239607 [ASSURED] mark=0 secmark=0 use=1 tcp 6 586 ESTABLISHED src=68.46.9.24 dst=1.2.3.4 sport=64688 dport=6969 packets=6 bytes=490 src=10.0.0.2 dst=68.46.9.24 sport=6969 dport=64688 packets=8 bytes=944 [ASSURED] mark=40 secmark=0 use=1 udp 17 45 src=222.254.228.38 dst=1.2.3.4 sport=25438 dport=6969 packets=5 bytes=454 src=10.0.0.2 dst=222.254.228.38 sport=6969 dport=25438 packets=3 bytes=154 [ASSURED] mark=0 secmark=0 use=1 ( full file visible at http://pastebin.com/AZE6EtWm ) I've been playing around with this log for a little while and I can't see any patterns! Why is some port 6969 bittorrent traffic tagged mark=0 (not matched) by dd-wrt's QoS while others are tagged mark=40 (Bulk) .. any ideas?

  Read the article

• BIND DNS server (Windows) - Unable to access my local domain from other computers on LAN

  - by Ricardo Saraiva

  I have a BIND DNS server running on my Windows 7 development machine and I'm serving pages with WAMPSERVER. My ideia is to develop some tools (in PHP) for my intranet at work and I want them to be accessible via LAN in this format: http://tools.mycompany.com I've already placed BIND and I can access http://tools.mycompany.com on the machine that holds BIND server, but I cannot access it from other LAN computers. I've done the following on my router: defined static IP's for all LAN computers set Port Forwarding to my server (remember: it serves DNS and Web pages) set DNS server configuration to point to my LAN server On LAN computers, I went to Local Area Network properties and also changed the DNS server IP in order to point to my local DNS server. If it helps, here is my named.conf file: options { directory "c:\windows\SysWOW64\dns\etc"; forwarders {127.0.0.1; 8.8.8.8; 8.8.4.4;}; pid-file "run\named.pid"; allow-transfer { none; }; recursion no; }; logging{ channel my_log{ file "log\named.log" versions 3 size 2m; severity info; print-time yes; print-severity yes; print-category yes; }; category default{ my_log; }; }; zone "mycompany.com" IN { type master; file "zones\db.mycompany.com.txt"; allow-transfer { none; }; }; key "rndc-key" { algorithm hmac-md5; secret "qfApxn0NxXiaacFHpI86Rg=="; }; controls { inet 127.0.0.1 port 953 allow { 127.0.0.1; } keys { "rndc-key"; }; }; ...and a single zone I've defined - file db.mycompany.com.txt: $TTL 6h @ IN SOA tools.mycompany.com. hostmaster.mycompany.com. ( 2014042601 10800 3600 604800 86400 ) @ NS tools.mycompany.com. tools IN A 192.168.1.4 www IN A 192.168.1.4 On the file above 192.168.1.4 is the IP of the local machine inside my LAN. Can someone help me here? I need my web pages to be accessible from other computers inside my LAN using my custom domain name. I've tried on other computers and they can access my server via http://192.168.1.4/, but no able when using http://tools.mycompany.com . Please, consider the following: I'm completely new to BIND I have basic knowledge in Apache configuration Thanks a lot for your help.

  Read the article

• how to use iptables to block the IP of device connected to openwrt router

  - by scola

  I have two routers(A,B).the A connect to internet with IP:192.168.1.1 The openwrt router B connect the lan of A by bridge with static IP:192.168.1.111. I am learning to use iptables to control the devices connected to B(wlan) . I use my phone to connect wifi of B,the phone's IP is IP:192.168.1.100.it can surf the internet normally. I want to block the phone's IP to make the phone can not connect to internet. refer to http://bredsaal.dk/some-small-iptables-on-openwrt-tips iptables -A input_wan -s 192.168.1.100 --jump REJECT iptables -A forwarding_rule -d 192.168.1.100 --jump REJECT but it do not work.the phone still connect to internet normally. and I tried other chain(INPUT,OUTPUT,FORWARD).so many chains confused me. iptables -I OUTPUT -o br-lan -s 192.168.1.100 -j DROP and it do not work again. I'm sure that the iptables have no problem. root@OpenWrt:/etc# iptables -L|grep Chain Chain INPUT (policy ACCEPT) Chain FORWARD (policy DROP) Chain OUTPUT (policy ACCEPT) Chain forward (1 references) Chain forwarding_lan (1 references) Chain forwarding_rule (1 references) Chain forwarding_wan (1 references) Chain input (1 references) Chain input_lan (1 references) Chain input_rule (1 references) Chain input_wan (1 references) Chain output (1 references) root@OpenWrt:/etc# ifconfig br-lan Link encap:Ethernet HWaddr 0C:82:68:97:57:BA inet addr:192.168.1.111 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::e82:68ff:fe97:57ba/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:14976 errors:0 dropped:0 overruns:0 frame:0 TX packets:7656 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:2851980 (2.7 MiB) TX bytes:1902785 (1.8 MiB) eth0 Link encap:Ethernet HWaddr 0C:82:68:97:57:BA UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:58201 errors:0 dropped:11 overruns:0 frame:0 TX packets:45012 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:54591348 (52.0 MiB) TX bytes:5711142 (5.4 MiB) Interrupt:4 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:312 errors:0 dropped:0 overruns:0 frame:0 TX packets:312 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:39961 (39.0 KiB) TX bytes:39961 (39.0 KiB) mon.wlan0 Link encap:UNSPEC HWaddr 0C-82-68-97-57-BA-00-48-00-00-00-00-00-00-00-00 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:4900 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:32 RX bytes:1223807 (1.1 MiB) TX bytes:0 (0.0 B) wlan0 Link encap:Ethernet HWaddr 0C:82:68:97:57:BA UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:37346 errors:0 dropped:0 overruns:0 frame:0 TX packets:49662 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:32 RX bytes:3808021 (3.6 MiB) TX bytes:54486310 (51.9 MiB) root@OpenWrt:/etc/config# cat network config 'interface' 'loopback' option 'ifname' 'lo' option 'proto' 'static' option 'ipaddr' '127.0.0.1' option 'netmask' '255.0.0.0' config 'interface' 'lan' option 'ifname' 'eth0' option 'type' 'bridge' option 'proto' 'static' option 'ipaddr' '192.168.1.111' option 'netmask' '255.255.255.0' option 'gateway' '192.168.1.1' option dns 192.168.1.1 and how to use iptables to control the network of wlan? Thanks in advance and sorry for poor English.

  Read the article

• Can I connect two routers to one switch?

  - by vanneto

  I want to connect two routers to a switch which will then be connected to a modem. Now as far as I know a switch does not do network translation and this won't work with one IP address. So I bought two addresses at my ISP. Attached is a simple schematic that explains what I want to do. Is there any additional configuration needed on either of the routers (Linksys WRT54GL) to make this work or will it "Just Work"?

  Read the article

• Nginx dynamic upstream configuration / routing

  - by Dan Sosedoff

  I was experimenting with dynamic upstream configuration for nginx and cant find any good solution to implement upstream configuration from third-party source like redis or mysql. The idea behind it is to have a single file configuration in primary server and proxy requests to various app servers based on environment conditions. Think of dynamic deployments where you have X servers that are running Y workers on different ports. For instance, i create a new app and deploy. App manager selects a server and then rolls out a worker (Ruby/PHP/Python) and then reports the ip:port to the central database with status "up". At this time when i go to the given url nginx should proxy all requests to the specified ip:port upstream. The whole thing is pretty similar to what heroku does, except this proof-of-concept is not supposed to be production ready, mostly for internal needs. The easiest solution i found was using resolver with ruby-based DNS server. It works, nginx gets the IP address correctly, but the only problem is that you cant define port number for that IP. Second solution (which i havent tried yet) is to roll something else as a proxy server, maybe written in Erlang. In this case we need to use something to serve static content. Any ideas how to implement this in more flexible and stable way? P.S. Some research options: http://openresty.org/#DynamicRoutingBasedOnRedis https://github.com/nodejitsu/node-http-proxy

  Read the article

• MultiPath configuration on RHEL5 and Clariion CX-300

  - by Kamil Z

  I have problem with discovering my FC-connected CX-300 storage. Frankly speaking I'm complete novice in FibreChannel, so step by step explanation would be appreciated. My configuration consist of two IBM HS20 blades with RHEL5.4 on board and 2x Qlogic ISP2422-based 4Gb Fibre Channel HBAs on each blade. As a FC switch there are two Brocades built in BladeCenter Chassis, and finally there is EMC Clariion CX-300. CX300, and Brocade switches should be configured properly, because they were working fine with previous configuration, which main defference was RHEL3 instead RHEL5.4 Below there is my output from several usefull commands: #lspci | grep Fibre 06:01.0 FibreChannle: Qlogic Corp. ISP2422-based 4Gb Fibre Channel to PCI-X HBA (rev 02) 06:01.1 FibreChannle: Qlogic Corp. ISP2422-based 4Gb Fibre Channel to PCI-X HBA (rev 02) #lsmod | grep qla qla2xxx 1084741 0 scsi_transport_fc 37577 1 qla2xxx scsi_mod 141717 10 scsi_dh,qla2xxx,sg,scsi_transport_fc,usb_storage,libata,mptspi,mptscsih,scsi_transport_spi,sd_mod #cat /proc/scsi/scsi Attached Devices: Host: scsi0 Channel: 00 Id: 00 Lun: 00 Vendor: LSILOGIC Model: 1030 IM IM Rev: 1000 Type: Direct-Access ANSI SCSI revision: 02 Host: scsi0 Channel: 01 Id: 00 Lun: 00 Vendor: IBM-ESXS Model: ST936701LC FN Rev: B418 Type: Direct-Access ANSI SCSI revision: 04 Host: scsi0 Channel: 01 Id: 00 Lun: 00 Vendor: IBM-ESXS Model: ST936701LC FN Rev: B418 Type: Direct-Access ANSI SCSI revision: 04 I'd followed instructions from this site (editing /etc/multipath.conf), but i failed after multipath -ll - the output was empty. Do you have any suggestions about discovering FC Connected LUNs in such configuration?

  Read the article

• DCOM configuration: accounts with same name but different passwords problem

  - by archimed7592

  Hello, everybody! I'm experiencing troubles with DCOM configuration. Here is the case: I'm using some product which supports client-server interaction through DCOM, but the client won't get any access to the server if the attempt is being done from an account with a name which exists at the server as well, but has different password. Basically, if we try to access the server from the Administrator account which obviously present on the server machine, we will fail if client's Administrator password doesn't match server's one. After actively collaborating with the product's developer in attempts to localize the issue, he come across with resolution "can't be fixed" or, if you prefer to call a pikestaff a pikestaff than it's more likely a "don't know how to fix" resolution :). I believe there is a solution for this problem and I'm asking you, IT professionals, to help me out with this one. I do realize that the problem may be caused by the way the developer interact with DCOM and if so it can't be fixed be means of pure system configuration and the question should be asked at SO, but since I've bumped into the same behavior while working with file/printer sharing - Windows tried to simplify everything and used currently impersonated credentials to access the share, I hope the solution lies at system configuration layer. P.S. I believe that the actual software product I'm talking about is entirely irrelevant however my experience tell me that there always would be somebody who will think that it on the contrary is very relevant. Here it is: SpRecord.

  Read the article

• Reloading NAT configuration on a running VMWare Server 2.0.2

  - by Jonathan Clarke

  I have a server running VMWare Server 2.0.2. The host is Debian Lenny. I have 15-20 virtual machines running, all attached to a single NAT network (named vmnet8). I have configured VMWare's NAT (the vmnet-natd daemon) to forward some incoming to ports to one of the VMs, since it hosts some publicly accessible services. I did this via the file /etc/vmware/vmnet8/nat/nat.conf by adding lines like the following: 80 = 192.168.100.100:80 This works great, I can reach the web server on the VM at 192.168.100.100 by connecting to the host's IP address. Sometimes, I need to add port redirections to this NAT configuration. So, I add a line to the configuration file. Now for the question. How do I make the natd process take this new configuration into account? Clearly, restarting the host machine does take it into account, and the newly added port is forwarded. However, this is not an option on this server, so how should one do this without restarting the whole host? Thanks for any ideas!

  Read the article

< Previous Page | 63 64 65 66 67 68 69 70 71 72 73 74  | Next Page >