Search Results

Search found 2374 results on 95 pages for 'stops'.

Page 67/95 | < Previous Page | 63 64 65 66 67 68 69 70 71 72 73 74  | Next Page >

• Asus K55VM usb 3.0 issue

  - by user2141481

  Good day superusers! I own the above laptop and I found out that there are some unknown and unusual issues with usb 3.0 ports. I haven't noticed anything strange until now. I got a new toshiba usb 3.0 external hdd and when I try to copy larger amount of data from my disk to the external hdd, the OS(windows 7) randomly starts ignoring the external hdd. It doesn't shut it down, it kinda just stops responding but the light on the hdd is still lit. I get an error that the files cannot be copied. I have reinstalled windows 7, installed all drivers(including intel chipset drivers of course) and the issue is still present. It acts normal when copying small amount of data. Also, I heard that some intel chipsets have an issue with usb, something about the connectors not transferring power when the usb device enters some kind of "low power mode" causing the device to stop responding and you need to plug it out and in again. But the thing is, my Intel® Chief River Chipset HM76 is not on the list of affected hardware(not ENTIRELY sure though). If anyone has any idea of what the problem to this might be, I'd be greatful. Edit: The hdd works perfectly fine even for large amounts of data if plugged in the usb 2.0 port!

  Read the article

• Connection problems via Wifi (multiple devices)

  - by Kelvin Farrell

  I'm having connection issues with my router (Linksys WRT610N) at home. There are a number of things that are happening (may be more, this is just what I've mainly noticed)... 1) Using my laptop (Macbook Pro OSX Lion), I am unable to complete any operations with my external FTP server, hosted with FatCow. I can connect to it, navigate through all the files, but when I try to edit/delete/add a file the operation times out. EVERY time. I've used two other Wifi connection on my laptop and neither have this issue. 2) I am unable to upload photos/videos to Facebook or Twitter using my phone (Samsung Galaxy S2) or my tablet (HP Touchpad - CM9). Neither am I able to upload files to Dropbox via either of the devices. Same thing happens in all situations; the upload will begin and it will just hang on 0% forever. After about 10 mins I am always forced to disconnect the Wifi to stop the action. 3) My laptop is having slow internet speed, even though we are on 20mb broadband. Speedtests say I'm getting a good connection and my Ping is good, but when using streaming services like Spotify, it takes forever to load a page and frequently stops to buffer whilst playing a song. Don't know if it's worth mentioning but I have no issues with my XBox (Ethernet), AppleTV (Wifi) or my girlfrield's phone (Nokia Lumia 800 - WP7.5) on the network. I'd really appreciate any help. This is driving me insane and is really affecting both my working and leisure use of the internet.

  Read the article

• Juniper’s Network Connect ncsvc on Linux: “host checker failed, error 10”

  - by hfs

  I’m trying to log in to a Juniper VPN with Network Connect from a headless Linux client. I followed the instructions and used the script from http://mad-scientist.us/juniper.html. When running the script with --nogui switch the command that gets finally executed is $HOME/.juniper_networks/network_connect/ncsvc -h HOST -u USER -r REALM -f $HOME/.vpn.default.crt. I get asked for the password, a line “Connecting to…” is printed but then the programm silently stops. When adding -L 5 (most verbose logging) to the command line, these are the last messages printed to the log: dsclient.info state: kStateCacheCleaner (dsclient.cpp:280) dsclient.info --> POST /dana-na/cc/ccupdate.cgi (authenticate.cpp:162) http_connection.para Entering state_start_connection (http_connection.cpp:282) http_connection.para Entering state_continue_connection (http_connection.cpp:299) http_connection.para Entering state_ssl_connect (http_connection.cpp:468) dsssl.para SSL connect ssl=0x833e568/sd=4 connection using cipher RC4-MD5 (DSSSLSock.cpp:656) http_connection.para Returning DSHTTP_COMPLETE from state_ssl_connect (http_connection.cpp:476) DSHttp.debug state_reading_response_body - copying 0 buffered bytes (http_requester.cpp:800) DSHttp.debug state_reading_response_body - recv'd 0 bytes data (http_requester.cpp:833) dsclient.info <-- 200 (authenticate.cpp:194) dsclient.error state host checker failed, error 10 (dsclient.cpp:282) ncapp.error Failed to authenticate with IVE. Error 10 (ncsvc.cpp:197) dsncuiapi.para DsNcUiApi::~DsNcUiApi (dsncuiapi.cpp:72) What does host checker failed mean? How can I find out what it tried to check and what failed? The HostChecker Configuration Guide mentions that a $HOME/.juniper_networks/tncc.jar gets installed on Linux, but my installation contains no such file. From that I concluded that HostChecker is disabled for my VPN on Linux? Are the POST to /dana-na/cc/ccupdate.cgi and “host checker failed” connected or independent? By running the connection over a SSL proxy I found out that the POST data is status=NOTOK (Funny side note: the client of the oh-so-secure VPN does not validate the server’s SSL certificate, so is wide open to MITM attacks…). So it seems that it’s the client that closes the connection and not the server.

  Read the article

• Cisco IOS BVI ACL: Only allow established UDP

  - by George Bailey

  Related: Cisco IOS ACL: Don't permit incoming connections just because they are from port 80 I know we can use the established keyword for TCP.. but what can we do for UDP (short of replacing a Bridge or BVI with a NAT)? Answer I found out what "UDP has no connection" means. DNS uses UDP for example.. named (DNS server) is lisenting on port 53 nslookup (DNS client) starts listening on some random port and sends a packet to port 53 of the server and notes the source port in that packet. nslookup will retry 3 times if necessary. Also the packets are so small that it does not have to worry about them coming in the wrong order. If nslookup receives a response on that port that comes from the servers IP and port then it stops listening. If the server tried to send two responses (for example a response and a response to the retry) then the server would not care if either of them made it because the client has the job to retry. In fact.. unless ICMP 3/3 packet gets through the server would not know about a failure. This is different from TCP where you get connection closed or timed out errors. DNS allows for an easy retry from the client as well as small packets.. so UDP is an excellent choice because it is more efficient. In UDP you would see nslookup sends request named sends answer In TCP you would see nslookup's machine sends SYN named's machine sends SYN-ACK nslookup's machine sends ACK and the request named's machine sends the response That is much more than is necessary for a tiny DNS packet

  Read the article

• Command line scripts to restore the 4 system databases of MS SQL Server 2008

  - by ciscokid

  Hi there, can someone give me some advice on how to restore the 4 system databases (master, msdb, model, tempdb) of a sql server 2008 please? I've already done some testing myself (on restoring the master database) with the following commad line script as a result: ::set variables set dbname=master set dbdirectory=C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA title Restoring %dbname% database net stop mssqlserver cd C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\Binn sqlservr -m sqlcmd -Slocalhost -E -Q "restore database master from disk='c:\master.bak' WITH REPLACE" net start mssqlserver pause After the execution of the 'sqlservr -m' command (used to start the server instance in single-user mode, which is only necessary when restoring the MASTER database), the script stops. So in order to execute the last 2 commands I need to separate the script into 2 smaller scripts, and run them one after the other. Does anyone has an idea on how I can merge them into one single script that runs completely without any interruption? I also want to restore the other 3 system databases using command line scripts like this one. Can someone please advice me how I need to go on? I've already noticed that restoring the temdb is not so easy, but there has to be a way... Looking forward to your advice!

  Read the article

• Ruby net:LDAP returns "code = 53 message = Unwilling to perform" error

  - by Yong

  Hi, I am getting this error "code = 53, message = Unwilling to perform" while I am traversing the eDirectory treebase = "ou=Users,o=MTC". My ruby script can read about 126 entries from eDirectory and then it stops and prints out this error. I do not have any clue of why this is happening. I am using the ruby net:LDAP library version 0.0.4. The following is an excerpt of the code. require 'rubygems' require 'net/ldap' ldap = Net::LDAP.new :host => "10.121.121.112", :port => 389, :auth => {:method => :simple, :username => "cn=abc,ou=Users,o=MTC", :password => "123" } filter = Net::LDAP::Filter.eq( "mail", "*mtc.ca.gov" ) treebase = "ou=Users,o=MTC" attrs = ["mail", "uid", "cn", "ou", "fullname"] i = 0 ldap.search( :base => treebase, :attributes => attrs, :filter => filter ) do |entry| puts "DN: #{entry.dn}" i += 1 entry.each do |attribute, values| puts " #{attribute}:" values.each do |value| puts " --->#{value}" end end end puts "Total #{i} entries found." p ldap.get_operation_result Here is the output and the error at the end. Thank you very much for your help. DN: cn=uvogle,ou=Users,o=MTC mail: --->[email protected] fullname: --->Ursula Vogler ou: --->Legislation and Public Affairs dn: --->cn=uvogle,ou=Users,o=MTC cn: --->uvogle Total 126 entries found. OpenStruct code=53, message="Unwilling to perform"

  Read the article

• How can I get Windows 7 to work with two Nvidia graphics cards with different drivers?

  - by Max

  This is similar to this question, but I am using more similar cards with Windows 7. I just purchased a Zotac Nvidia GeForce 7200 GS. I have a motherboard with two PCI Express x16 slots. There is already an MSI Nvidia GeForce 8800 GTS being used as the primary card, driving two LCD monitors. I would like the Zotac to output to a TV via DVI-out. Unfortunately, when Windows detects the Zotac and installs its drivers, or I manually install them, Windows stops being able to boot up. If I remove them and re-install the MSI 8800 drivers, I can boot again, but Windows can no longer see the Zotac 7200--it shows up as a yellow triangle in Device Manager. I've read conflicting reports about this. Some people claim that Windows 7 will support multiple heterogeneous graphics card drivers, as long as they are all using the same driver API ("WDDM?"). Others say that they have to be using the exact same driver, or it won't work. Others claim that you have to use the exact same card. which is it, exactly? I know I can run the MSI 8800 in SLI if I purchase another, but I don't need that kind of power--I just need HD-out to my television. I read somewhere that running two cards in SLI precludes you from using 100% of their output ports, so I'm not sure if that's an option. I suppose I could also run two MSI 8800's without SLI, but again, that's more power than I need (and more money than I'd like to spend). Also, I don't think this exact model is even manufactured anymore. Any ideas?

  Read the article

• Application (was Firefox) crash on first load on Ubuntu Linux on older Dell Laptop

  - by Ira Baxter

  I've had a Dell Latitude laptop since about 2000 without managing to destroy it. A month ago the Windows 2000 system on it did something stupid to its file system and Windows was completely lost. No point in reinstalling Windows 2000, so I installed an Ubuntu Linux on the laptop. Everything seems normal (installed, rebooted, I can log in, run GnuChess, poke about). ... but ... when I attempt to launch Firefox from the top bar menu icon, I get a bunch of disk activity, the whirling cursor icon goes round a bit and then (WAS: everything stops: icon, mouse. Literally nothing happens for 5 minutes. Ubuntu is dead, as far as I can tell. EDIT : on further investigation, spinning icon, mouse operated by touchpad freeze. There's apparantly a little disk activity occuring about every 5 seconds. I wait 5-10 minutes, behavior doesn't change) A reboot, and I can repeat this reliably. So on the face of it, everything works but Firefox. That seems really strange. The only odd thing about this system when Firefox is booting is that while it has an Ethernet port (that worked fine under Windows), it isn't actually plugged into an Ethernet. As this is the first Firefox boot since the Ubuntu install, maybe Firefox mishandles Internet access? Why would that crash Ubuntu? (I need to go try the obvious experiment of plugging it in). EDIT: I tried to run the Disk manager tool, not that I cared what it was, just a menu-available application. It started up like Firefox, I get a little tag in the lower left saying Disk P*** something had started, and then the same behavior as Firefox. At this point, I don't think its the Ethernet. Is it possible that the Ubuntu disk driver can't handle the disk controller in this older laptop? The install seemed to go fine.

  Read the article

• Debugging Windows PC freeze

  - by Violet Giraffe

  I have a problem with my computer, would appreciate any hints/ideas. It usually begins not immediately after booting Windows, but at some unpredictable point in time, which doesn't seem to correlate with any specific actions of mine. First sign of a problem is process System starting to consume 25% CPU time steadily. I have a quad-core CPU, so it might be one thread working non-stop. At this point micro-freezes start to occur - screen stops refreshing, but if I have, say, music player running - it continues playing. If I try to do something between the freezes, like open Start menu, it will freeze completely and forever. If I press reset button the PC will shut down and then start cold, as opposed to usual reset behavior (which doesn't include PC shutting down). I have noticed that full restart upon reset is usual for hardware problems, but I think this problem isn't related to at least motherboard-CPU-RAM-videoadapter. It certainly isn't caused by overheating. One very important not is that it seems to be related to Windows hosted WLAN network: I have USB Wi-Fi dongle and have configured a hosted network to share cable Internet connection with Wi-Fi devices. I am not 100% certain there's a strong connection, but in 9 or 10 cases when I enabled the network (by executing netsh wlan start hostednetwork), it did freeze eventually (sometimes within minutes of starting the network, sometimes within hours), and on at least 10 days when I didn't start the network it never froze, no matter how I used the computer). There are no critical/error entries in the events log that I can suspect as being related, only regular stuff like "driver not loaded". I have found no critical/error events that are being logged around the time of freeze occurring and are not logged during normal boot without starting the WLAN.

  Read the article

• Archive Manager, SQL 2005 and MaxTokenSize high CPU

  - by Tim Alexander

  So, I posted this question a few days ago: Impact of increasing the MaxTokenSize for Kerberos Tickets Since then the thought was to test our settings on two member servers, one with IIS and one without. I setup two GPOs to configure the MaxTokenSize reg setting to 48000 and MaxFieldLength/MaxRequestBytes to 64200 (based on MS KB2020943, these are set at 4/3 * T + 200). The member server seemed to work ok (a devalued tape backup server). The IIS server however has had some strange repercussions. The IIS Sserver host Quest Software Archive Manager (AM) 4.5 that communicates with SQL Server 2005 Enterprise on Server 2003 R2. After the changes all looked good until the SQL Server hit 100% CPU. I have removed the GPOS, removed the reg values and even replaced them with defaults (12000 for token size and can't remember the other one but was in a blog post about the issue in my other post). No change. Bouncing the IIS Server stops the high CPU and a colleague has looked at the SQL server and it is definitely the AM connection taking up the time/work on the SQL server. I haven't changed the reg values on the SQL server or the DCs but am reluctant to do so without understanding why this has happened. I am guessing its to do with the overriding auth and group issue we have but I am not seeing Kerberos errors in either event log. Has anyone seen something similar or does anyone have some tips? Was definitely blindsided by the Kerberos issue and am swimming against the tide to keep things functioning.

  Read the article

• Using gitlab behind Apache proxy all generated urls are wrong

  - by Hippyjim

  I've set up Gitlab on Ubuntu 12.04 using the default package from https://about.gitlab.com/downloads/ {edit to clarify} I've set up Apache to proxy and run the nginx server the package installed on port 8888 (or so I thought). As I had Apache installed already I have to run nginx on localhost:8888. The problem is, all images (such as avatars) are now served from http://localhost:8888, and all the checkout urls Gitlab gives are also localhost - instead of using my domain name. If I change /etc/gitlab/gitlab.rb to use that url, then Gitlab stops working and gives a 503. Any ideas how I can tell Gitlab what URL to present to the world, even though it's really running on localhost? /etc/gitlab/gitlab.rb looks like: # Change the external_url to the address your users will type in their browser external_url 'http://my.local.domain' redis['port'] = 6379 postgresql['port'] = 2345 unicorn['port'] = 3456 and /opt/gitlab/embedded/conf/nginx.conf looks like: server { listen localhost:8888; server_name my.local.domain; [Update] It looks like nginx is still listening on the wrong port if I don't specify localhost:8888 as the external_url. I found this in /var/log/gitlab/nginx/error.log 2014/08/19 14:29:58 [emerg] 2526#0: bind() to 0.0.0.0:80 failed (98: Address already in use) 2014/08/19 14:29:58 [emerg] 2526#0: bind() to 0.0.0.0:80 failed (98: Address already in use) 2014/08/19 14:29:58 [emerg] 2526#0: bind() to 0.0.0.0:80 failed (98: Address already in use) 2014/08/19 14:29:58 [emerg] 2526#0: bind() to 0.0.0.0:80 failed (98: Address already in use) 2014/08/19 14:29:58 [emerg] 2526#0: bind() to 0.0.0.0:80 failed (98: Address already in use) 2014/08/19 14:29:58 [emerg] 2526#0: still could not bind() Apache setup looks like: <VirtualHost *:80> ServerName my.local.domain ServerSignature Off ProxyPreserveHost On AllowEncodedSlashes NoDecode <Location /> ProxyPass http://localhost:8888/ ProxyPassReverse http://127.0.0.1:8888 ProxyPassReverse http://my.local.domain </Location> </VirtualHost> Which seems to proxy everything back ok if Gitlab listens on localhost:8888 - I just need Gitlab to start displaying the right URL, instead of localhost:8888.

  Read the article

• FreeBSD's ng_nat stopping pass the packets periodically

  - by Korjavin Ivan

  I have FreeBSD router: #uname 9.1-STABLE FreeBSD 9.1-STABLE #0: Fri Jan 18 16:20:47 YEKT 2013 It's a powerful computer with a lot of memory #top -S last pid: 45076; load averages: 1.54, 1.46, 1.29 up 0+21:13:28 19:23:46 84 processes: 2 running, 81 sleeping, 1 waiting CPU: 3.1% user, 0.0% nice, 32.1% system, 5.3% interrupt, 59.5% idle Mem: 390M Active, 1441M Inact, 785M Wired, 799M Buf, 5008M Free Swap: 8192M Total, 8192M Free PID USERNAME THR PRI NICE SIZE RES STATE C TIME WCPU COMMAND 11 root 4 155 ki31 0K 64K RUN 3 71.4H 254.83% idle 13 root 4 -16 - 0K 64K sleep 0 101:52 103.03% ng_queue 0 root 14 -92 0 0K 224K - 2 229:44 16.55% kernel 12 root 17 -84 - 0K 272K WAIT 0 213:32 15.67% intr 40228 root 1 22 0 51060K 25084K select 0 20:27 1.66% snmpd 15052 root 1 52 0 104M 22204K select 2 4:36 0.98% mpd5 19 root 1 16 - 0K 16K syncer 1 0:48 0.20% syncer Its tasks are: NAT via ng_nat and PPPoE server via mpd5. Traffic through - about 300Mbit/s, about 40kpps at peak. Pppoe sessions created - 350 max. ng_nat is configured by by the script: /usr/sbin/ngctl -f- <<-EOF mkpeer ipfw: nat %s out name ipfw:%s %s connect ipfw: %s: %s in msg %s: setaliasaddr 1.1.%s There are 20 such ng_nat nodes, with about 150 clients. Sometimes, the traffic via nat stops. When this happens vmstat reports a lot of FAIL counts vmstat -z | grep -i netgraph ITEM SIZE LIMIT USED FREE REQ FAIL SLEEP NetGraph items: 72, 10266, 1, 376,39178965, 0, 0 NetGraph data items: 72, 10266, 9, 10257,2327948820,2131611,4033 I was tried increase net.graph.maxdata=10240 net.graph.maxalloc=10240 but this doesn't work. It's a new problem (1-2 week). The configuration had been working well for about 5 months and no configuration changes were made leading up to the problems starting. In the last few weeks we have slightly increased traffic (from 270 to 300 mbits) and little more pppoe sessions (300-350). Help me please, how to find and solve my problem?

  Read the article

• Mystery 0xc0000142 error on starting java from a service, as a different user.

  - by cpf

  This is a very convoluted setup, but effectively this is what goes down: Manager service (which I don't have control over) running as admin user X starts my executable, which then starts Java as user Y using the standard c# StartInfo.Username/Password controls. Now, from a basic (not elevated or anything, just admin) command prompt I can run that executable, and Java pops up and works fine, running perfectly under the user it should be. When the service runs the same executable, however, Java silently fails. The only hint I see is this series of events in the event viewer: Service starts "Application popup: java.exe - Application Error : The application was unable to start correctly (0xc0000142). Click OK to close the application. " (googling this reveals a lot of scam sites telling me to use their "free antivirus to fix 0xc0000142 errors easy!"... sigh) Service stops (the java shutdown propagated, which is supposed to happen) And here's what process explorer has for the failure: As you can see, everything shows as a success. Now, I think this might have something to do with the permissions (the user java.exe is running under has traverse permission for the entire drive and full permissions to Directory A, which is where the .jar is), but I just can't fathom how something that works fine from the command line (and, this is an upgrade, the previous system without the user-switching aspect works fine from the service) can fail with such a cryptic message and little showing up in logs.

  Read the article

• Outlook Signature Broken in Entourage

  - by Eric J.

  Some of our company uses Windows with Outlook 2010, and the rest use Mac with Entourage. When our standard signature line is included in an email that goes to Entourage, the result does not display correctly. It appears that Entourage is mangling the HTML. My working theory is that Entourage encounters inline CSS styles it does not know about and stops processing styles, but I'm really not sure. Question: How can I enter a signature into Outlook 2010 that will render correctly in Entourage? For example, can I specify somehow the exact HTML to use? Here's an example of how the HTML is being changed. Original on Outlook, as received by another Outlook client: <span style='font-size:9.0pt;font-family:"Century Gothic","sans-serif"; color:#1785C5'>My Company<br> </span></b><span class=apple-style-span><span style='font-size:9.0pt; font-family:"Century Gothic","sans-serif";color:#666666'>123 Main St.</span></span><span class=apple-style-span><span style='font-size:9.0pt;font-family:"Century Gothic","sans-serif"; color:#AFAFAF'>&nbsp;</span></span><span class=apple-style-span><span style='font-size:9.0pt;font-family:"Century Gothic","sans-serif";color:#666666'>Suite 100</span></span> Note the use of spans, color #1785C5 and color #666666. Same original email, as displayed in an Entourage client: <span style='font-size:9.0pt;font-family:"Century Gothic","sans-serif"; mso-fareast-font-family:"Times New Roman"'><br> <span style='color:#656565'>My Company<br> 123 Main St Suite 100<br> </span> Note the use of br tags rather than spans, and the color #656565.

  Read the article

• What can cause kernel out_of_memory error?

  - by nbolton

  I'm running Debian GNU/Linux 5.0 and I'm experiencing intermittent out_of_memory errors coming from the kernel. The server stops responding to all but pings, and I have to reboot the server. # uname -a Linux xxx 2.6.18-164.9.1.el5xen #1 SMP Tue Dec 15 21:31:37 EST 2009 x86_64 GNU/Linux This seems to be the important bit from /var/log/messages Dec 28 20:16:25 slarti kernel: Call Trace: Dec 28 20:16:25 slarti kernel: [<ffffffff802bedff>] out_of_memory+0x8b/0x203 Dec 28 20:16:25 slarti kernel: [<ffffffff8020f825>] __alloc_pages+0x245/0x2ce Dec 28 20:16:25 slarti kernel: [<ffffffff8021377f>] __do_page_cache_readahead+0xc6/0x1ab Dec 28 20:16:25 slarti kernel: [<ffffffff80214015>] filemap_nopage+0x14c/0x360 Dec 28 20:16:25 slarti kernel: [<ffffffff80208ebc>] __handle_mm_fault+0x443/0x1337 Dec 28 20:16:25 slarti kernel: [<ffffffff8026766a>] do_page_fault+0xf7b/0x12e0 Dec 28 20:16:25 slarti kernel: [<ffffffff8026ef17>] monotonic_clock+0x35/0x7b Dec 28 20:16:25 slarti kernel: [<ffffffff80262da3>] thread_return+0x6c/0x113 Dec 28 20:16:25 slarti kernel: [<ffffffff8021afef>] remove_vma+0x4c/0x53 Dec 28 20:16:25 slarti kernel: [<ffffffff80264901>] _spin_lock_irqsave+0x9/0x14 Dec 28 20:16:25 slarti kernel: [<ffffffff8026082b>] error_exit+0x0/0x6e Full snippet here: http://pastebin.com/a7eWf7VZ I thought that perhaps the server was actually running out of memory (it has 1GB physical memory), but my Cacti memory graph looks OK to me... But strangely the load graph goes through the roof shortly before the kernel crashes: What logs can I look at for more info? Update: Maybe noteworthy - the CPU percentage and network traffic graphs were both normal at the time of the crash. The only abnormality was the average load graph.

  Read the article

• Computer sending data while turned off

  - by Nicklas Ansman

  I have a some what strange problem (which could have and easy and obvious solution for all I know). My problem is that when I've booted ubuntu (now 10.4 but same problem with 9.10) and turns it off it starts sending a HUGE amount of data via the ethernet cable, so much in fact that my router can't handle it and stops responding. As far as I can tell the computer is completely turned off with no fans spinning. I can add that if I boot windows I do not have this problem, just when exiting ubuntu. There are two "fixes" for my problem: Pull the ethernet cable until the next boot Turn off power to the PSU and wait for the capacitors to unload Is there anyone who knows what could be going on? I'd be happy to post some logs or conf-files. Currently I'm using the ethernet port on my motherboard which is a Asus P6T Deluxe V2 with an updated version of the BIOS (maybe not the latest but since it only happens when I've been in ubuntu I don't wanna mess with the BIOS too much). Regards Nicklas ---------Update 1---------- The router is a D-Link DIR 655 with the latest firmware. ---------Update 2---------- I've now reinstalled ubuntu (with 10.4) and I still experience the same problem.

  Read the article

• Change Windows 7 Explorer's Details Pane limits

  - by Paul

  For some reason, MS decided to completely kill the status bar's functionality in Win7 (and maybe Vista, but I don't know for sure). I have tried all possible options such as Classic Shell and so on. Basically, the one thing I miss most is seeing at a glance the total size of my selected files. I know I can press Alt+Enter or whatever, but that's not the point. The point is that the so-called 'details' pane stops providing details if more than 15 files are selected! WTH? Cannot understand the reason behind such a stupid arbitrary limit, that doesn't seem to be user-configurable at all. Anyway, what I'm looking for is a way to change that limit, either via the registry or otherwise. If changing the limit isn't possible, would it be possible for some programming genius to create a very small optimized light-weight non resource-hungry (you get the idea!) program whose sole purpose will be to automatically click the "Show more details..." link in the details pane after every file selection? For bonus points, the program should wait for a second or two after file selection is complete to do this, so that selecting multiple files in quick succession doesn't hit the HDD repeatedly. Any takers for the challenge? :)

  Read the article

• Blank list of windows services

  - by Joe

  Recently when I open windows services (always as administrator) I get a blank list of services: When I try and click on one of the empty lines I get this "Script Error" message: This happens over and over again, after several times I restarted my computer. I can't pinpoint exactly when this started happening or if I made any specific changes to my computer at that time. Someone told my to try running scf /scannow as administrator, but when I try to do that the scan stops at 34% and I get the message: "Windows Resource Protection could not perform the requested operation." I am running Windows 7 Enterprise 64 bit, and I would really like to avoid reinstalling windows. Does anyone know how to fix this? Edit - Here is another attempt I made and some more information that might help: Following WhoIsRich's suggestion, I tried the command sfc /scannow /offbootdir=c:\ /offwindir=c:\windows. This gave the error message "The arguments passed to sfc are invalid. The offline windows directory specified points to the online system", and then I realized this command is meant to be run after booting from another system. Since I don't have my windows installation disk right now, I used my own system to create a recovery disk, and then restarted my computer and used the recovery disk to boot. I then ran the above command, and I got the following message: "Windows Resource Protection found corrupt files but was unable to fix some of them. Details are included in the CBS.log". I then restarted my computer and let it boot up normally. The problem with windows services persists, and the CBS.log file is a long log file with many entries, and I don't know if there is useful information in it, and if there is, how to find it.

  Read the article

• Server Crash Diagnosis...Are there any 'black box recorder' style programs available.

  - by columbo

  My redhat server is crashing every three weeks or so at 4:15am ish on Sunday mornings. (well it was sundays the last two have been Thursday mornings at 4:15ish) Looking at the logs (mysql, httpd, messages) there are no clues as to why. They just seem to stop. I ran a little script to take memory readings every 15 minutes and it too stops (with normal readings) at this time. The server is remote at a provider so I can only access it via the web. I use Plesk. It appears to be a set job or something that is causing the issue. I can see nothing in crontab. So my question is...has anyone else had this and can offer advice? Failing that. Does any one know of a way to get more detailed logging than that offered by the messages file? I was thinking of a black box style recording program or maybe something as simple as an option somewhere to increase the level of reporting in the messages log. Thanks

  Read the article

• Why does my Belkin Play router regularly stop working for a few minutes at a time?

  - by YeahStu

  I recently purchased a Belking Play dual-band router for my home. About every few hours, the router stops working or "cuts out" for several minutes before coming back online automatically. My old one did this as well. I figured out a main problem was my wireless home phone, which sends a 2.4GHz signal. Anytime someone would call the phone, my router would get interrupted. Therefore, I unplugged this phone and got a wired phone. Unfortunately, my wired phone has the same problem. Therefore, I unplugged the wired phone. Unfortunately, my router still has regular issues. I live in a home with neighbors within close proximity to me, so it might be possible that their devices are the ones causing me problems. How can I determine what is causing my router problems? I thought that the point of a dual-band router was that if a signal was interfering on one band then it would be uninterrupted on another. However, it seems that is not the case. Does anyone have any tips on how to troubleshoot this or any knowledge you can share to properly set my expectations?

  Read the article

• Very high-pitched noise when computer does something intense?

  - by Starkers

  "Intense" is the best word I can use to describe it because I'm not sure what it is, whether it's RAM, GPU or CPU. If I pan the camera in unity: A high pitched noise issues from the computer. The picosecond I start panning the sound starts. Stops the picosecond I stop panning. If I start an infinite loop: 2.0.0p247 :016 > x = 1 => 1 2.0.0p247 :017 > while x < 2 do 2.0.0p247 :018 > puts 'huzzah!' 2.0.0p247 :019?> end huzzah! huzzah! huzzah! An identical high pitched noise can be heard. I don't think it's the GPU due to this simple experiment. Or any monitor-weirdness (although the sound does sound like one of those old CRT monitors if you're old enough to be young when those things were about) The CPU? Or maybe my SSD? It's my first SSD and the first time I've heard this noise. Should I be worried? Regardless, what's causing this sound? I can't think what would cause such high frequency vibrations. I built the PC myself. Not enough heat paste on the CPU? Too much? Just no idea what's going on. Info: CPU Type QuadCore Intel Core i5-3570K, 3800 MHz (38 x 100) Motherboard Name Asus Maximus V Extreme Flash Memory Type Samsung 21nm TLC NAND Video Adapter Asus HD7770

  Read the article

• Traceroute to IP address fails, but traceroute to domain name with same IP address is okay. Why?

  - by tomo

  When I traceroute to this IP (108.162.198.181) it stops after 1 hop. But tracerouting to a domain (www.gomodule.com) with the same IP shows 9 hops ending in that target. traceroute to www.gomodule.com (108.162.198.81), 64 hops max, 52 byte packets 1 192.168.1.1 (192.168.1.1) 131.667 ms 48.532 ms 48.837 ms 2 118.69.255.124 (118.69.255.124) 91.521 ms 79.177 ms 30.679 ms 3 42.117.11.225 (42.117.11.225) 30.270 ms 32.091 ms 29.698 ms 4 118.69.253.213 (118.69.253.213) 32.234 ms 118.69.253.237 (118.69.253.237) 70.667 ms 118.69.253.213 (118.69.253.213) 82.440 ms 5 118.69.253.245 (118.69.253.245) 64.554 ms 80.277 ms 130.224 ms 6 118.69.251.205 (118.69.251.205) 65.635 ms 118.69.249.78 (118.69.249.78) 133.234 ms 118.69.251.205 (118.69.251.205) 224.111 ms 7 118.69.251.249 (118.69.251.249) 156.679 ms 111.965 ms 64.165 ms 8 cloudflare1-rge.hkix.net (202.40.160.246) 64.102 ms 64.498 ms 74.581 ms 9 108.162.198.81 (108.162.198.81) 66.873 ms 67.426 ms 69.054 ms -vs- traceroute to 108.162.198.181 (108.162.198.181), 64 hops max, 52 byte packets 1 192.168.1.1 (192.168.1.1) 96.588 ms 3.003 ms 4.976 ms 2 118.69.255.124 (118.69.255.124) 45.223 ms 31.449 ms 31.225 ms 3 * * * 4 * * * 5 * * * 6 * * * 7 * * * 8 * * * 9 * * * 10 * * * ...

  Read the article

• switchover in postgresql

  - by user1010280

  I am using Postgresql 9.0 with Streaming replication. So, during switchover I follow these steps:- Get the server timestamp on primary. Get the current log position on primary. Set Verify Log location Verify Transaction Received Location Shutdown DB on production. Synchronize the transaction logs from PR to DR. Trigger a failover on the DR Database by creating the trigger file specified in recovery.conf Verify DB Mode on DR Copy the control file from from DR to primary. copy the temporary stats file from DR to primary. copy the history file from DR to primary. Create recovery.conf file. Start Database in standby mode in primary. Verify DB mode on PR At step (6), I have to copy last wal generated on Primary to standby and sync both PR and standby. but this thing takes time to copy files because this remote. So that postgres will keep seraching for wal for long time and after that it stops the server. So I want to know is there any way so that I can ask postgres to stop seraching or locating WAL after shutdown??? because postgres tries to locate this wal every 5 seconds. Please reply as soon as possible..its urgent...

  Read the article

• HP Photosmart C4780 printer/scanner breaks netgear WNDR3700v3 router on connection

  - by CodeJunkie

  A few months ago, we upgraded our Netgear router's firmware. Immediately, we started having trouble connecting to the internet. Each time this problem would happen, every device in the house would stop being able to make new connections to the internet. For example, you couldn't open new pages in the browser, but if Skype was running when the problem happened, you could keep talking to people. The only solution to this problem seemed to be resetting the router to factory defaults. Eventually, we solved this problem by just downgrading the router firmware. A while later, we got a new Netgear router. Almost right away, the new router started having exactly the same problems as the old one did on current firmware. The network connection would stay active and the computer would say it had an internet connection, but you couldn't do anything online except for using Skype. We eventually figured out that this happens every time our HP printer gets onto the network. Any time the printer gets onto the wireless network, the whole network stops connecting to the internet almost completely. The only thing that will fix it at that point is to reset the router to factory specs, and unplug the printer so it can't get back onto the network. The Netgear router has the latest version of the firmware, but the printer/scanner is very old. It looks to me like this problem is probably a result of a firmware conflict between the printer and the router, but I'm not sure how to fix that problem. Here's some additional information: Printer: HP Photosmart C4780 Router: WNDR3700v3 Router firmware: V1.0.0.22_1.0.17 (Stock, up to date firmware) Why would the printer getting on the network cause the router to not be able to access the internet correctly until it was reset? What can be done to allow the printer to be on the network without breaking the network for all other devices? Edit: One other thing that happens during this internet problem is that multiple computers in the house display an "IP conflict" message repeatedly, and extremely frequently (as often as every five to ten minutes, and every time a connection to the wireless is made).

  Read the article

• Doing port forwarding and then using it from within the internal network

  - by Ram Rachum

  We all know that by doing port forwarding on the router, computers from outside the network are able, on the specified ports, to access internal computers by targeting the external IP. I'm now replacing a TP-Link router with a D-link VDSL N 6740U router, (and copied over all the settings,) and I've noticed that one thing stopped working: With the TP-link router, you could access those port-forwarded computers from within the network, using the external IP, and they would be forwarded to the relevant computers. With the new D-Link router, it doesn't work. You might be wondering, why would you want to use the external IP and port forwarding when you're inside the internal network anyway and can just access the internal IP? One example for why this is useful: You have an iPhone app that connects to a service on an internal computer. The iPhone app knows to connect to the external IP. When we put that iPhone inside the internal network (via WiFi), it suddenly stops working, because it can't access the service from the external IP anymore. Is it an inherent property of D-Link routers that they do not allow accessing internal servers from inside the network by targeting the external IP? Or is there a way to make it work?

  Read the article

< Previous Page | 63 64 65 66 67 68 69 70 71 72 73 74  | Next Page >