Search Results

Search found 9467 results on 379 pages for 'tutor flowchart policy policy and procedure manual procedure'.

Page 67/379 | < Previous Page | 63 64 65 66 67 68 69 70 71 72 73 74  | Next Page >

• Creating static NAT blocks outbound traffic Cisco ASA

  - by natediggs

  Hi Everyone, I have two web servers sitting behind a Cisco ASA 5505, which I don't have much experience with. I'm trying to create two static NATs. One static NAT that goes to xx.xx.xx.150 and another that goes to xx.xx.xx.151. I've created the static NAT for the .150 web server and it works FINE. Incoming and outgoing traffic work great. This is the staging web server. I now need to duplicate the setup for the production web server. So, I connect the webserver to the firewall, change the public IP address on one of the NICs reboot the server and I have outbound internet access. Then I run the command: static (inside,outside) xx.xx.xx.150 192.168.1.x which is successful. I then run the command: access-list acl-outside permit tcp any host xx.xx.xx.150 eq 80 Which is successful. I then try to browse the internet and I get nothing. I try to telnet in through port 80 and I get nothing (though I'm guessing because the response to the telnet request is being blocked). I've tried this with the production web server and then I tried it with another web server that is for internal testing and have the exact same problem. Both work fine until I run the static NAT rule and then no outbound internet access. I have a feeling that it's something simple that I'm missing, but my limited experience with this device is killing me. Below I've pasted the current configuration. I'm currently trying to get this to work on the .153 server which is the internal testing server. Once I can verify that works, I'll try it with production. : Saved : ASA Version 8.2(4) ! hostname QG domain-name XX.com enable password passwd names ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! interface Vlan1 nameif inside security-level 100 ip address 192.168.1.1 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address XX.XX.XX.148 255.255.255.0 ! interface Vlan3 shutdown no forward interface Vlan1 nameif dmz security-level 50 ip address dhcp ! boot system disk0:/asa824.bin ftp mode passive clock timezone EST -5 clock summer-time EDT recurring dns server-group DefaultDNS domain-name fw.XXgroup.com same-security-traffic permit inter-interface access-list acl-outside extended permit tcp any host XX.XX.XX.150 eq www access-list acl-outside extended permit tcp any host XX.XX.XX.150 eq https access-list acl-outside extended permit tcp any host XX.XX.XX.151 eq www access-list acl-outside extended permit tcp any host XX.XX.XX.151 eq https access-list acl-outside extended permit tcp any host XX.XX.XX.153 eq www access-list inside_access_in extended permit ip 192.168.1.0 255.255.255.0 any access-list inside_nat0_outbound extended permit ip any 192.168.1.32 255.255.255.240 pager lines 24 logging enable logging asdm informational mtu inside 1500 mtu outside 1500 mtu dmz 1500 ip local pool VPNIPs 192.168.1.35-192.168.1.44 mask 255.255.255.0 icmp unreachable rate-limit 1 burst-size 1 asdm image disk0:/asdm-635.bin no asdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 0 access-list inside_nat0_outbound nat (inside) 1 0.0.0.0 0.0.0.0 static (inside,outside) XX.XX.XX150 192.168.1.100 netmask 255.255.255.255 static (inside,outside) XX.XX.XX153 192.168.1.102 netmask 255.255.255.255 access-group acl-outside in interface outside route outside 0.0.0.0 0.0.0.0 XX.XX.XX129 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 dynamic-access-policy-record DfltAccessPolicy aaa authorization command LOCAL http server enable http 192.168.1.0 255.255.255.0 inside http 0.0.0.0 0.0.0.0 outside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 crypto dynamic-map outside_dyn_map 20 set pfs group1 crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-SHA crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map crypto map outside_map interface outside crypto isakmp enable outside crypto isakmp policy 10 authentication crack encryption 3des hash sha group 2 lifetime 86400 no crypto isakmp nat-traversal client-update enable telnet timeout 5 ssh timeout 5 console timeout 0 dhcpd auto_config outside ! dhcpd address 192.168.1.2-192.168.1.33 inside dhcpd dns 208.77.88.4 interface inside dhcpd enable inside ! threat-detection basic-threat threat-detection statistics access-list no threat-detection statistics tcp-intercept webvpn enable outside svc image disk0:/sslclient-win-1.1.0.154.pkg 1 svc image disk0:/anyconnect-win-2.5.2019-k9.pkg 2 svc enable group-policy ATSAdmin internal group-policy ATSAdmin attributes dns-server value 208.77.88.4 208.85.174.9 vpn-tunnel-protocol IPSec svc webvpn webvpn url-list none svc keep-installer installed svc rekey method ssl svc ask enable username qgadmin password /oHfeGQ/R.bd3KPR encrypted privilege 15 username benl password 0HNIGQNI0uruJvhW encrypted privilege 0 username benl attributes vpn-group-policy ATSAdmin username kuzma password rH7MM7laoynyvf9U encrypted privilege 0 username kuzma attributes vpn-group-policy ATSAdmin username nate password BXHOURyT37e4O5mt encrypted privilege 0 username nate attributes vpn-group-policy ATSAdmin tunnel-group ATSAdmin type remote-access tunnel-group ATSAdmin general-attributes address-pool VPNIPs default-group-policy ATSAdmin tunnel-group SSLVPN type remote-access tunnel-group SSLVPN general-attributes address-pool VPNIPs default-group-policy ATSAdmin ! class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum 512 policy-map global_policy class inspection_default inspect dns preset_dns_map inspect ftp inspect h323 h225 inspect h323 ras inspect rsh inspect rtsp inspect esmtp inspect sqlnet inspect skinny inspect sunrpc inspect xdmcp inspect sip inspect netbios inspect tftp inspect ip-options ! service-policy global_policy global privilege cmd level 3 mode exec command perfmon privilege cmd level 3 mode exec command ping privilege cmd level 3 mode exec command who privilege cmd level 3 mode exec command logging privilege cmd level 3 mode exec command failover privilege show level 5 mode exec command running-config privilege show level 3 mode exec command reload privilege show level 3 mode exec command mode privilege show level 3 mode exec command firewall privilege show level 3 mode exec command interface privilege show level 3 mode exec command clock privilege show level 3 mode exec command dns-hosts privilege show level 3 mode exec command access-list privilege show level 3 mode exec command logging privilege show level 3 mode exec command ip privilege show level 3 mode exec command failover privilege show level 3 mode exec command asdm privilege show level 3 mode exec command arp privilege show level 3 mode exec command route privilege show level 3 mode exec command ospf privilege show level 3 mode exec command aaa-server privilege show level 3 mode exec command aaa privilege show level 3 mode exec command crypto privilege show level 3 mode exec command vpn-sessiondb privilege show level 3 mode exec command ssh privilege show level 3 mode exec command dhcpd privilege show level 3 mode exec command vpn privilege show level 3 mode exec command blocks privilege show level 3 mode exec command uauth privilege show level 3 mode configure command interface privilege show level 3 mode configure command clock privilege show level 3 mode configure command access-list privilege show level 3 mode configure command logging privilege show level 3 mode configure command ip privilege show level 3 mode configure command failover privilege show level 5 mode configure command asdm privilege show level 3 mode configure command arp privilege show level 3 mode configure command route privilege show level 3 mode configure command aaa-server privilege show level 3 mode configure command aaa privilege show level 3 mode configure command crypto privilege show level 3 mode configure command ssh privilege show level 3 mode configure command dhcpd privilege show level 5 mode configure command privilege privilege clear level 3 mode exec command dns-hosts privilege clear level 3 mode exec command logging privilege clear level 3 mode exec command arp privilege clear level 3 mode exec command aaa-server privilege clear level 3 mode exec command crypto privilege cmd level 3 mode configure command failover privilege clear level 3 mode configure command logging privilege clear level 3 mode configure command arp privilege clear level 3 mode configure command crypto privilege clear level 3 mode configure command aaa-server prompt hostname context call-home profile CiscoTAC-1 no active destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address email [email protected] destination transport-method http subscribe-to-alert-group diagnostic subscribe-to-alert-group environment subscribe-to-alert-group inventory periodic monthly subscribe-to-alert-group configuration periodic monthly subscribe-to-alert-group telemetry periodic daily Cryptochecksum:0ed0580e151af288d865f4f3603d792a : end asdm image disk0:/asdm-635.bin no asdm history enable

  Read the article

• Quantifying the effects of partition mis-alignment

  - by Matt

  I'm experiencing some significant performance issues on an NFS server. I've been reading up a bit on partition alignment, and I think I have my partitions mis-aligned. I can't find anything that tells me how to actually quantify the effects of mis-aligned partitions. Some of the general information I found suggests the performance penalty can be quite high (upwards of 60%) and others say it's negligible. What I want to do is determine if partition alignment is a factor in this server's performance problems or not; and if so, to what degree? So I'll put my info out here, and hopefully the community can confirm if my partitions are indeed mis-aligned, and if so, help me put a number to what the performance cost is. Server is a Dell R510 with dual E5620 CPUs and 8 GB RAM. There are eight 15k 2.5” 600 GB drives (Seagate ST3600057SS) configured in hardware RAID-6 with a single hot spare. RAID controller is a Dell PERC H700 w/512MB cache (Linux sees this as a LSI MegaSAS 9260). OS is CentOS 5.6, home directory partition is ext3, with options “rw,data=journal,usrquota”. I have the HW RAID configured to present two virtual disks to the OS: /dev/sda for the OS (boot, root and swap partitions), and /dev/sdb for a big NFS share: [root@lnxutil1 ~]# parted -s /dev/sda unit s print Model: DELL PERC H700 (scsi) Disk /dev/sda: 134217599s Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 63s 465884s 465822s primary ext2 boot 2 465885s 134207009s 133741125s primary lvm [root@lnxutil1 ~]# parted -s /dev/sdb unit s print Model: DELL PERC H700 (scsi) Disk /dev/sdb: 5720768639s Sector size (logical/physical): 512B/512B Partition Table: gpt Number Start End Size File system Name Flags 1 34s 5720768606s 5720768573s lvm Edit 1 Using the cfq IO scheduler (default for CentOS 5.6): # cat /sys/block/sd{a,b}/queue/scheduler noop anticipatory deadline [cfq] noop anticipatory deadline [cfq] Chunk size is the same as strip size, right? If so, then 64kB: # /opt/MegaCli -LDInfo -Lall -aALL -NoLog Adapter #0 Number of Virtual Disks: 2 Virtual Disk: 0 (target id: 0) Name:os RAID Level: Primary-6, Secondary-0, RAID Level Qualifier-3 Size:65535MB State: Optimal Stripe Size: 64kB Number Of Drives:7 Span Depth:1 Default Cache Policy: WriteBack, ReadAdaptive, Direct, No Write Cache if Bad BBU Current Cache Policy: WriteThrough, ReadAdaptive, Direct, No Write Cache if Bad BBU Access Policy: Read/Write Disk Cache Policy: Disk's Default Number of Spans: 1 Span: 0 - Number of PDs: 7 ... physical disk info removed for brevity ... Virtual Disk: 1 (target id: 1) Name:share RAID Level: Primary-6, Secondary-0, RAID Level Qualifier-3 Size:2793344MB State: Optimal Stripe Size: 64kB Number Of Drives:7 Span Depth:1 Default Cache Policy: WriteBack, ReadAdaptive, Direct, No Write Cache if Bad BBU Current Cache Policy: WriteThrough, ReadAdaptive, Direct, No Write Cache if Bad BBU Access Policy: Read/Write Disk Cache Policy: Disk's Default Number of Spans: 1 Span: 0 - Number of PDs: 7 If it's not obvious, virtual disk 0 corresponds to /dev/sda, for the OS; virtual disk 1 is /dev/sdb (the exported home directory tree).

  Read the article

• MegaCli newly created disk doesn't appear under /dev/sdX

  - by Henry-Nicolas Tourneur

  After having successfully added 2 new disks in a new RAID virtual drive (background initialization done), I would have exepected it to appear under /dev/sdh but it's not there (so, unusable). The system is running a CentOS 5.2 64 bits, HAL and udev daemons are running, not records of any sdh apparition under the messsage log file or in dmesg, only MegaCli do see that virtual drive. Any idea ? Some data: [root@server ~]# ./MegaCli -LDInfo -LALL -a0 Adapter 0 -- Virtual Drive Information: Virtual Disk: 0 (target id: 0) Name: RAID Level: Primary-1, Secondary-0, RAID Level Qualifier-0 Size:139392MB State: Optimal Stripe Size: 64kB Number Of Drives:2 Span Depth:1 Default Cache Policy: WriteBack, ReadAheadNone, Direct, No Write Cache if Bad BBU Current Cache Policy: WriteBack, ReadAheadNone, Direct, No Write Cache if Bad BBU Access Policy: Read/Write Disk Cache Policy: Disk's Default Virtual Disk: 1 (target id: 1) Name: RAID Level: Primary-1, Secondary-0, RAID Level Qualifier-0 Size:285568MB State: Optimal Stripe Size: 64kB Number Of Drives:2 Span Depth:1 Default Cache Policy: WriteBack, ReadAheadNone, Direct, No Write Cache if Bad BBU Current Cache Policy: WriteBack, ReadAheadNone, Direct, No Write Cache if Bad BBU Access Policy: Read/Write Disk Cache Policy: Disk's Default [root@server ~]# ls -l /dev/disk/by-id/scsi-360* lrwxrwxrwx 1 root root 9 Nov 17 2010 /dev/disk/by-id/scsi-36001ec90f82fe100108ca0a704098d09 -> ../../sda lrwxrwxrwx 1 root root 10 Nov 17 2010 /dev/disk/by-id/scsi-36001ec90f82fe100108ca0a704098d09-part1 -> ../../sda1 lrwxrwxrwx 1 root root 10 Nov 17 2010 /dev/disk/by-id/scsi-36001ec90f82fe100108ca0a704098d09-part2 -> ../../sda2 lrwxrwxrwx 1 root root 9 Nov 17 2010 /dev/disk/by-id/scsi-36090a028e0fe07e78f94940c0000a0ee -> ../../sdf lrwxrwxrwx 1 root root 10 Nov 17 2010 /dev/disk/by-id/scsi-36090a028e0fe07e78f94940c0000a0ee-part1 -> ../../sdf1 lrwxrwxrwx 1 root root 9 Nov 17 2010 /dev/disk/by-id/scsi-36090a028e0fe972a3f91240a0000005f -> ../../sdb lrwxrwxrwx 1 root root 10 Nov 17 2010 /dev/disk/by-id/scsi-36090a028e0fe972a3f91240a0000005f-part1 -> ../../sdb1 lrwxrwxrwx 1 root root 9 Nov 17 2010 /dev/disk/by-id/scsi-36090a028e0fea7e18f94640c000020ec -> ../../sde lrwxrwxrwx 1 root root 10 Nov 17 2010 /dev/disk/by-id/scsi-36090a028e0fea7e18f94640c000020ec-part1 -> ../../sde1 lrwxrwxrwx 1 root root 9 Nov 17 2010 /dev/disk/by-id/scsi-36090a028e0feb7da8f94340c0000203d -> ../../sdd lrwxrwxrwx 1 root root 10 Nov 17 2010 /dev/disk/by-id/scsi-36090a028e0feb7da8f94340c0000203d-part1 -> ../../sdd1 lrwxrwxrwx 1 root root 9 Nov 17 2010 /dev/disk/by-id/scsi-36090a028e0fed7d78f94040c000080b7 -> ../../sdc lrwxrwxrwx 1 root root 10 Nov 17 2010 /dev/disk/by-id/scsi-36090a028e0fed7d78f94040c000080b7-part1 -> ../../sdc1 lrwxrwxrwx 1 root root 9 Nov 17 2010 /dev/disk/by-id/scsi-36090a05830145e58e0b9c479000010a1 -> ../../sdg lrwxrwxrwx 1 root root 10 Nov 17 2010 /dev/disk/by-id/scsi-36090a05830145e58e0b9c479000010a1-part1 -> ../../sdg1

  Read the article

• Linux service --status-all shows "Firewall is stopped." what service does firewall refer to?

  - by codewaggle

  I have a development server with the lamp stack running CentOS: [Prompt]# cat /etc/redhat-release CentOS release 5.8 (Final) [Prompt]# cat /proc/version Linux version 2.6.18-308.16.1.el5xen ([email protected]) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-52)) #1 SMP Tue Oct 2 22:50:05 EDT 2012 [Prompt]# yum info iptables Loaded plugins: fastestmirror Loading mirror speeds from cached hostfile * base: mirror.anl.gov * extras: centos.mirrors.tds.net * rpmfusion-free-updates: mirror.us.leaseweb.net * rpmfusion-nonfree-updates: mirror.us.leaseweb.net * updates: mirror.steadfast.net Installed Packages Name : iptables Arch : x86_64 Version : 1.3.5 Release : 9.1.el5 Size : 661 k Repo : installed .... Snip.... When I run: service --status-all Part of the output looks like this: .... Snip.... httpd (pid xxxxx) is running... Firewall is stopped. Table: filter Chain INPUT (policy DROP) num target prot opt source destination 1 RH-Firewall-1-INPUT all -- 0.0.0.0/0 0.0.0.0/0 Chain FORWARD (policy DROP) num target prot opt source destination 1 RH-Firewall-1-INPUT all -- 0.0.0.0/0 0.0.0.0/0 Chain OUTPUT (policy ACCEPT) num target prot opt source destination Chain RH-Firewall-1-INPUT (2 references) ....Snip.... iptables has been loaded to the kernel and is active as represented by the rules being displayed. Checking just the iptables returns the rules just like status all does: [Prompt]# service iptables status Table: filter Chain INPUT (policy DROP) num target prot opt source destination 1 RH-Firewall-1-INPUT all -- 0.0.0.0/0 0.0.0.0/0 Chain FORWARD (policy DROP) num target prot opt source destination 1 RH-Firewall-1-INPUT all -- 0.0.0.0/0 0.0.0.0/0 Chain OUTPUT (policy ACCEPT) num target prot opt source destination Chain RH-Firewall-1-INPUT (2 references) .... Snip.... Starting or restarting iptables indicates that the iptables have been loaded to the kernel successfully: [Prompt]# service iptables restart Flushing firewall rules: [ OK ] Setting chains to policy ACCEPT: filter [ OK ] Unloading iptables modules: [ OK ] Applying iptables firewall rules: [ OK ] Loading additional iptables modules: ip_conntrack_netbios_n[ OK ] [Prompt]# service iptables start Flushing firewall rules: [ OK ] Setting chains to policy ACCEPT: filter [ OK ] Unloading iptables modules: [ OK ] Applying iptables firewall rules: [ OK ] Loading additional iptables modules: ip_conntrack_netbios_n[ OK ] I've googled "Firewall is stopped." and read a number of iptables guides as well as the RHEL documentation, but no luck. As far as I can tell, there isn't a "Firewall" service, so what is the line "Firewall is stopped." referring to?

  Read the article

• What's the Best Practice for Firing Manual OnClick Events?

  - by Tyler Murry

  Hey guys, I've got an XNA project that will be drawing several objects on the screen. I would like the user to be able to interact with those items. So I'm trying to build a method that checks to see which object the mouse is over, out of those which is the top most, and then fire an OnClick event for that object. Checking for the things above is not the problem, but where to actually put that logic is most of the issue. My initial feeling is that the checking should be handled by a master object - since it doesn't make sense for an object, who ideally knows only about itself, to determine information about the other objects. However, calling OnClick events remotely from the master object seems to be counter-intuitive as well. What's the best practice in this situation? Thanks, Tyler

  Read the article

• Lock statement vs Monitor.Enter method.

  - by Vokinneberg

  I suppose it is an interesting code example. We have a class, let's call it Test with Finalize method. In Main method here is two code blocks where i am using lock statement and Monitor.Enter call. Also i have two instances of class Test here. The experiment is pretty simple - nulling Test variable within locking block and try to collect it manually with GC.Collect method call. So, to see the Finilaze call i am calling GC.WaitForPendingFinalizers method. Everything is very simple as you can see. By defenition of lock statement it's opens by compiler to try{...}finally{..} block with Minitor.Enter call inside of try block and Monitor.Exit in finally block. I've tryed to implement try-finally block manually. I've expected the same behaviour in both cases. in case of using lock and in case of unsing Monitor.Enter. But, surprize, surprize - it is different as you can see below. public class Test : IDisposable { private string name; public Test(string name) { this.name = name; } ~Test() { Console.WriteLine(string.Format("Finalizing class name {0}.", name)); } } class Program { static void Main(string[] args) { var test1 = new Test("Test1"); var test2 = new Test("Tesst2"); lock (test1) { test1 = null; Console.WriteLine("Manual collect 1."); GC.Collect(); GC.WaitForPendingFinalizers(); Console.WriteLine("Manual collect 2."); GC.Collect(); } var lockTaken = false; System.Threading.Monitor.Enter(test2, ref lockTaken); try { test2 = null; Console.WriteLine("Manual collect 3."); GC.Collect(); GC.WaitForPendingFinalizers(); Console.WriteLine("Manual collect 4."); GC.Collect(); } finally { System.Threading.Monitor.Exit(test2); } Console.ReadLine(); } } Output of this example is Manual collect 1. Manual collect 2. Manual collect 3. Finalizing class name Test2. Manual collect 4. And null reference exception in last finally block because test2 is null reference. I've was surprised and disasembly my code into IL. So, here is IL dump of Main method. .entrypoint .maxstack 2 .locals init ( [0] class ConsoleApplication2.Test test1, [1] class ConsoleApplication2.Test test2, [2] bool lockTaken, [3] bool <>s__LockTaken0, [4] class ConsoleApplication2.Test CS$2$0000, [5] bool CS$4$0001) L_0000: nop L_0001: ldstr "Test1" L_0006: newobj instance void ConsoleApplication2.Test::.ctor(string) L_000b: stloc.0 L_000c: ldstr "Tesst2" L_0011: newobj instance void ConsoleApplication2.Test::.ctor(string) L_0016: stloc.1 L_0017: ldc.i4.0 L_0018: stloc.3 L_0019: ldloc.0 L_001a: dup L_001b: stloc.s CS$2$0000 L_001d: ldloca.s <>s__LockTaken0 L_001f: call void [mscorlib]System.Threading.Monitor::Enter(object, bool&) L_0024: nop L_0025: nop L_0026: ldnull L_0027: stloc.0 L_0028: ldstr "Manual collect." L_002d: call void [mscorlib]System.Console::WriteLine(string) L_0032: nop L_0033: call void [mscorlib]System.GC::Collect() L_0038: nop L_0039: call void [mscorlib]System.GC::WaitForPendingFinalizers() L_003e: nop L_003f: ldstr "Manual collect." L_0044: call void [mscorlib]System.Console::WriteLine(string) L_0049: nop L_004a: call void [mscorlib]System.GC::Collect() L_004f: nop L_0050: nop L_0051: leave.s L_0066 L_0053: ldloc.3 L_0054: ldc.i4.0 L_0055: ceq L_0057: stloc.s CS$4$0001 L_0059: ldloc.s CS$4$0001 L_005b: brtrue.s L_0065 L_005d: ldloc.s CS$2$0000 L_005f: call void [mscorlib]System.Threading.Monitor::Exit(object) L_0064: nop L_0065: endfinally L_0066: nop L_0067: ldc.i4.0 L_0068: stloc.2 L_0069: ldloc.1 L_006a: ldloca.s lockTaken L_006c: call void [mscorlib]System.Threading.Monitor::Enter(object, bool&) L_0071: nop L_0072: nop L_0073: ldnull L_0074: stloc.1 L_0075: ldstr "Manual collect." L_007a: call void [mscorlib]System.Console::WriteLine(string) L_007f: nop L_0080: call void [mscorlib]System.GC::Collect() L_0085: nop L_0086: call void [mscorlib]System.GC::WaitForPendingFinalizers() L_008b: nop L_008c: ldstr "Manual collect." L_0091: call void [mscorlib]System.Console::WriteLine(string) L_0096: nop L_0097: call void [mscorlib]System.GC::Collect() L_009c: nop L_009d: nop L_009e: leave.s L_00aa L_00a0: nop L_00a1: ldloc.1 L_00a2: call void [mscorlib]System.Threading.Monitor::Exit(object) L_00a7: nop L_00a8: nop L_00a9: endfinally L_00aa: nop L_00ab: call string [mscorlib]System.Console::ReadLine() L_00b0: pop L_00b1: ret .try L_0019 to L_0053 finally handler L_0053 to L_0066 .try L_0072 to L_00a0 finally handler L_00a0 to L_00aa I does not see any difference between lock statement and Monitor.Enter call. So, why i steel have a reference to the instance of test1 in case of lock, and object is not collected by GC, but in case of using Monitor.Enter it is collected and finilized?

  Read the article

• Ado.net Fill method not throwing error on running a Stored Procedure that does not exist.

  - by Mike

  I am using a combination of the Enterprise library and the original Fill method of ADO. This is because I need to open and close the command connection myself as I am capture the event Info Message Here is my code so far // Set Up Command SqlDatabase db = new SqlDatabase(ConfigurationManager.ConnectionStrings[ConnectionName].ConnectionString); SqlCommand command = db.GetStoredProcCommand(StoredProcName) as SqlCommand; command.Connection = db.CreateConnection() as SqlConnection; // Set Up Events for Logging command.StatementCompleted += new StatementCompletedEventHandler(command_StatementCompleted); command.Connection.FireInfoMessageEventOnUserErrors = true; command.Connection.InfoMessage += new SqlInfoMessageEventHandler(Connection_InfoMessage); // Add Parameters foreach (Parameter parameter in Parameters) { db.AddInParameter(command, parameter.Name, (System.Data.DbType)Enum.Parse(typeof(System.Data.DbType), parameter.Type), parameter.Value); } // Use the Old Style fill to keep the connection Open througout the population // and manage the Statement Complete and InfoMessage events SqlDataAdapter da = new SqlDataAdapter(command); DataSet ds = new DataSet(); // Open Connection command.Connection.Open(); // Populate da.Fill(ds); // Dispose of the adapter if (da != null) { da.Dispose(); } // If you do not explicitly close the connection here, it will leak! if (command.Connection.State == ConnectionState.Open) { command.Connection.Close(); } ... Now if I pass into the variable StoredProcName = "ThisProcDoesNotExists" And run this peice of code. The CreateCommand nor da.Fill through an error message. Why is this. The only way I can tell it did not run was that it returns a dataset with 0 tables in it. But when investigating the error it is not appearant that the procedure does not exist. EDIT Upon further investigation command.Connection.FireInfoMessageEventOnUserErrors = true; is causeing the error to be surpressed into the InfoMessage Event From BOL When you set FireInfoMessageEventOnUserErrors to true, errors that were previously treated as exceptions are now handled as InfoMessage events. All events fire immediately and are handled by the event handler. If is FireInfoMessageEventOnUserErrors is set to false, then InfoMessage events are handled at the end of the procedure. What I want is each print statement from Sql to create a new log record. Setting this property to false combines it as one big string. So if I leave the property set to true, now the question is can I discern a print message from an Error ANOTHER EDIT So now I have the code so that the flag is set to true and checking the error number in the method void Connection_InfoMessage(object sender, SqlInfoMessageEventArgs e) { // These are not really errors unless the Number >0 // if Number = 0 that is a print message foreach (SqlError sql in e.Errors) { if (sql.Number == 0) { Logger.WriteInfo("Sql Message",sql.Message); } else { // Whatever this was it was an error throw new DataException(String.Format("Message={0},Line={1},Number={2},State{3}", sql.Message, sql.LineNumber, sql.Number, sql.State)); } } } The issue now that when I throw the error it does not bubble up to the statement that made the call or even the error handler that is above that. It just bombs out on that line The populate looks like // Populate try { da.Fill(ds); } catch (Exception e) { throw new Exception(e.Message, e); } Now even though I see the calling codes and methods still in the Call Stack, this exception does not seem to bubble up?

  Read the article

• How can I make js that needs manual input dynamic?

  - by Noor

  I don't really know how to ask this, so I wrote up the script here: http://jsbin.com/acaxi/edit It's pretty straight forward, I'm trying to create sliding panels. I know there's alot of scripts that does that good, to be honest there are too many. If anyone thinks there is a plugin you could recommend instead of my script then please do share!

  Read the article

• What is batch testing? How do it in manual testing?

  - by Fiveta

  Is tester execute set of regression test cases may called as batch test ?

  Read the article

• Do COM Dll References Require Manual Disposal? If so, How?

  - by Drew

  I have written some code in VB that verifies that a particular port in the Windows Firewall is open, and opens one otherwise. The code uses references to three COM DLLs. I wrote a WindowsFirewall class, which Imports the primary namespace defined by the DLLs. Within members of the WindowsFirewall class I construct some of the types defined by the DLLs referenced. The following code isn't the entire class, but demonstrates what I am doing. Imports NetFwTypeLib Public Class WindowsFirewall Public Shared Function IsFirewallEnabled as Boolean Dim icfMgr As INetFwMgr icfMgr = CType(System.Activator.CreateInstance(Type.GetTypeFromProgID("HNetCfg.FwMgr")), INetFwMgr) Dim profile As INetFwProfile profile = icfMgr.LocalPolicy.CurrentProfile Dim fIsFirewallEnabled as Boolean fIsFirewallEnabled = profile.FirewallEnabled return fIsFirewallEnabled End Function End Class I do not reference COM DLLs very often. I have read that unmanaged code may not be cleaned up by the garbage collector and I would like to know how to make sure that I have not introduced any memory leaks. Please tell me (a) if I have introduced a memory leak, and (b) how I may clean it up. (My theory is that the icfMgr and profile objects do allocate memory that remains unreleased until after the application closes. I am hopeful that setting their references equal to nothing will mark them for garbage collection, since I can find no other way to dispose of them. Neither one implements IDisposable, and neither contains a Finalize method. I suspect they may not even be relevant here, and that both of those methods of releasing memory only apply to .Net types.)

  Read the article

• You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version

  - by user1810442

  Hi I keep getting SQL syntax error when i'm running my code in php, however when i remove the variables and do it manually in MYSQL, not a problem. I've tried 2 different versions of query one with (') and other with (") and nothing. Could you please help? Thank you. $produpdateid = $_GET ['id']; $varcat = $_POST['category']; $vartitle = strip_tags($_POST['title']); $varoverview = strip_tags($_POST['overview']); $varfeatures = strip_tags($_POST['features']); $varspecification = strip_tags($_POST['specification']); $varmaker = strip_tags($_POST['maker']); $varsize = $_POST['size']; $varprice = $_POST['price']; $varstock = $_POST['stock']; $vartype = $_POST['stock']; $q = 'UPDATE products SET products_category_id=' . $varcat . ', title=' . $vartitle . ', overview=' . $varoverview . ', features=' . $varfeatures . ', specification=' . $varspecification . ', size=' . $varsize . ', size_type=' . $vartype . ', maker=' . $varmaker . ', image=' . $varimg . ', price=' . $varprice . ', stock=' . $varstock .' WHERE id=' .$produpdateid; /*$test = "UPDATE products SET products_category_id=" . $varcat . ", title=" . $vartitle . ", overview=" . $varoverview . ", features=" . $varfeatures . ", specification=" . $varspecification . ", size=" . $varsize . ", size_type=" . $vartype . ", maker=" . $varmaker . ", image=" . $varimg . ", price=" . $varprice . ", stock=" . $varstock ." WHERE id=" .$produpdateid;*/ $updateresult = mysqli_query($dbc,$q);

  Read the article

• Is using a DataSet's column Expression works in background same as manual calculation?

  - by Harikrishna

  I have one datatable which is not bindided and records are coming from the file by parsing it in the datatable dynamically every time. Now there is three columns in the datatable Marks1,Marks2 and FinalMarks. And their types is decimal. Now for making addition of columns Marks1 and Marks2 's records and store it into FinalMarks column,For that what I do is : datatableResult.Columns["FinalMarks"].Expression="Marks1+Marks2"; It's works properly. It can be done in other way also is foreach (DataRow r in datatableResult.Rows) { r["FinalMarks"]=Convert.ToDecimal(r["Marks1"])+Convert.ToDecimal(r["Marks2"]); } Is first approach same as second approach in background means is both approach same or what? EDIT: I want to know that first approach works in background as second approach.

  Read the article

• Manual for Cross-Compile a c++ application from linux to windows?

  - by pabloh84

  Just that. I would like some information (links, reference, examples...) to guide me to do that. I don't even know if it's possible. My objective is to compile a program in Linux and get a .exe file that I can run under windows.

  Read the article

• jquery code completion and netbeans... not working, although done like in the manual

  - by blincv

  Hey, what i read on several help-pages, was, that getting jquery code completion to work, was just: getting targeted browsers right (the only one i choose was firefox 3.x or later) putting jquery file into project (it is now visible in "source files") adding the "script type"etc.-line (tried filename with and without / before ) Did this... but still no code completion. Any ideas? Got windows 7 and netbeans 7, 32bit system. Wtf is wrong? :( http://www.loaditup.de/files/615138.png

  Read the article

• How to detect application launch type (auto-start or manual)?

  - by ZHS

  Hi How can I detect that application was automatically started (auto-start when device turned on) or user has started it manually (from Programs etc)? Thanks

  Read the article

• Silverlight for Windows Embedded tutorial (step 6)

  - by Valter Minute

  In this tutorial step we will develop a very simple clock application that may be used as a screensaver on our devices and will allow us to discover a new feature of Silverlight for Windows Embedded (transforms) and how to use an “old” feature of Windows CE (timers) inside a Silverlight for Windows Embedded application. Let’s start with some XAML, as usual: <UserControl xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" Width="640" Height="480" FontSize="18" x:Name="Clock">   <Canvas x:Name="LayoutRoot" Background="#FF000000"> <Grid Height="24" Width="150" Canvas.Left="320" Canvas.Top="234" x:Name="SecondsHand" Background="#FFFF0000"> <TextBlock Text="Seconds" TextWrapping="Wrap" Width="50" HorizontalAlignment="Right" VerticalAlignment="Center" x:Name="SecondsText" Foreground="#FFFFFFFF" TextAlignment="Right" Margin="2,2,2,2"/> </Grid> <Grid Height="24" x:Name="MinutesHand" Width="100" Background="#FF00FF00" Canvas.Left="320" Canvas.Top="234"> <TextBlock HorizontalAlignment="Right" x:Name="MinutesText" VerticalAlignment="Center" Width="50" Text="Minutes" TextWrapping="Wrap" Foreground="#FFFFFFFF" TextAlignment="Right" Margin="2,2,2,2"/> </Grid> <Grid Height="24" x:Name="HoursHand" Width="50" Background="#FF0000FF" Canvas.Left="320" Canvas.Top="234"> <TextBlock HorizontalAlignment="Right" x:Name="HoursText" VerticalAlignment="Center" Width="50" Text="Hours" TextWrapping="Wrap" Foreground="#FFFFFFFF" TextAlignment="Right" Margin="2,2,2,2"/> </Grid> </Canvas> </UserControl> This XAML file defines three grid panels, one for each hand of our clock (we are implementing an analog clock using one of the most advanced technologies of the digital world… how cool is that?). Inside each hand we put a TextBlock that will be used to display the current hour, minute, second inside the dial (you can’t do that on plain old analog clocks, but it looks nice). As usual we use XAML2CPP to generate the boring part of our code. We declare a class named “Clock” and derives from the TClock template that XAML2CPP has declared for us. class Clock : public TClock<Clock> { ... }; Our WinMain function is more or less the same we used in all the previous samples. It initializes the XAML runtime, create an instance of our class, initialize it and shows it as a dialog: int WINAPI WinMain(HINSTANCE hInstance, HINSTANCE hPrevInstance, LPTSTR lpCmdLine, int nCmdShow) { if (!XamlRuntimeInitialize()) return -1;   HRESULT retcode;   IXRApplicationPtr app; if (FAILED(retcode=GetXRApplicationInstance(&app))) return -1; Clock clock;   if (FAILED(clock.Init(hInstance,app))) return -1;     UINT exitcode;   if (FAILED(clock.GetVisualHost()->StartDialog(&exitcode))) return -1;   return exitcode; } Silverlight for Windows Embedded provides a lot of features to implement our UI, but it does not provide timers. How we can update our clock if we don’t have a timer feature? We just use plain old Windows timers, as we do in “regular” Windows CE applications! To use a timer in WinCE we should declare an id for it: #define IDT_CLOCKUPDATE 0x12341234 We also need an HWND that will be used to receive WM_TIMER messages. Our Silverlight for Windows Embedded page is “hosted” inside a GWES Window and we can retrieve its handle using the GetContainerHWND function of our VisualHost object. Let’s see how this is implemented inside our Clock class’ Init method: HRESULT Init(HINSTANCE hInstance,IXRApplication* app) { HRESULT retcode;   if (FAILED(retcode=TClock<Clock>::Init(hInstance,app))) return retcode;   // create the timer user to update the clock HWND clockhwnd;   if (FAILED(GetVisualHost()->GetContainerHWND(&clockhwnd))) return -1;   timer=SetTimer(clockhwnd,IDT_CLOCKUPDATE,1000,NULL); return 0; } We use SetTimer to create a new timer and GWES will send a WM_TIMER to our window every second, giving us a chance to update our clock. That sounds great… but how could we handle the WM_TIMER message if we didn’t implement a window procedure for our window? We have to move a step back and look how a visual host is created. This code is generated by XAML2CPP and is inside xaml2cppbase.h: virtual HRESULT CreateHost(HINSTANCE hInstance,IXRApplication* app) { HRESULT retcode; XRWindowCreateParams wp;   ZeroMemory(&wp, sizeof(XRWindowCreateParams)); InitWindowParms(&wp);   XRXamlSource xamlsrc;   SetXAMLSource(hInstance,&xamlsrc); if (FAILED(retcode=app->CreateHostFromXaml(&xamlsrc, &wp, &vhost))) return retcode;   if (FAILED(retcode=vhost->GetRootElement(&root))) return retcode; return S_OK; } As you can see the CreateHostFromXaml function of IXRApplication accepts a structure named XRWindowCreateParams that control how the “plain old” GWES Window is created by the runtime. This structure is initialized inside the InitWindowParm method: // Initializes Windows parameters, can be overridden in the user class to change its appearance virtual void InitWindowParms(XRWindowCreateParams* wp) { wp->Style = WS_OVERLAPPED; wp->pTitle = windowtitle; wp->Left = 0; wp->Top = 0; } This method set up the window style, title and position. But the XRWindowCreateParams contains also other fields and, since the function is declared as virtual, we could initialize them inside our version of InitWindowParms: // add hook procedure to the standard windows creation parms virtual void InitWindowParms(XRWindowCreateParams* wp) { TClock<Clock>::InitWindowParms(wp);   wp->pHookProc=StaticHostHookProc; wp->pvUserParam=this; } This method calls the base class implementation (useful to not having to re-write some code, did I told you that I’m quite lazy?) and then initializes the pHookProc and pvUserParam members of the XRWindowsCreateParams structure. Those members will allow us to install a “hook” procedure that will be called each time the GWES window “hosting” our Silverlight for Windows Embedded UI receives a message. We can declare a hook procedure inside our Clock class: // static hook procedure static BOOL CALLBACK StaticHostHookProc(VOID* pv,HWND hwnd,UINT Msg,WPARAM wParam,LPARAM lParam,LRESULT* pRetVal) { ... } You should notice two things here. First that the function is declared as static. This is required because a non-static function has a “hidden” parameters, that is the “this” pointer of our object. Having an extra parameter is not allowed for the type defined for the pHookProc member of the XRWindowsCreateParams struct and so we should implement our hook procedure as static. But in a static procedure we will not have a this pointer. How could we access the data member of our class? Here’s the second thing to notice. We initialized also the pvUserParam of the XRWindowsCreateParams struct. We set it to our this pointer. This value will be passed as the first parameter of the hook procedure. In this way we can retrieve our this pointer and use it to call a non-static version of our hook procedure: // static hook procedure static BOOL CALLBACK StaticHostHookProc(VOID* pv,HWND hwnd,UINT Msg,WPARAM wParam,LPARAM lParam,LRESULT* pRetVal) { return ((Clock*)pv)->HostHookProc(hwnd,Msg,wParam,lParam,pRetVal); } Inside our non-static hook procedure we will have access to our this pointer and we will be able to update our clock: // hook procedure (handles timers) BOOL HostHookProc(HWND hwnd,UINT Msg,WPARAM wParam,LPARAM lParam,LRESULT* pRetVal) { switch (Msg) { case WM_TIMER: if (wParam==IDT_CLOCKUPDATE) UpdateClock(); *pRetVal=0; return TRUE; } return FALSE; } The UpdateClock member function will update the text inside our TextBlocks and rotate the hands to reflect current time: // udates Hands positions and labels HRESULT UpdateClock() { SYSTEMTIME time; HRESULT retcode;   GetLocalTime(&time);   //updates the text fields TCHAR timebuffer[32];   _itow(time.wSecond,timebuffer,10);   SecondsText->SetText(timebuffer);   _itow(time.wMinute,timebuffer,10);   MinutesText->SetText(timebuffer);   _itow(time.wHour,timebuffer,10);   HoursText->SetText(timebuffer);   if (FAILED(retcode=RotateHand(((float)time.wSecond)*6-90,SecondsHand))) return retcode;   if (FAILED(retcode=RotateHand(((float)time.wMinute)*6-90,MinutesHand))) return retcode;   if (FAILED(retcode=RotateHand(((float)(time.wHour%12))*30-90,HoursHand))) return retcode;   return S_OK; } The function retrieves current time, convert hours, minutes and seconds to strings and display those strings inside the three TextBlocks that we put inside our clock hands. Then it rotates the hands to position them at the right angle (angles are in degrees and we have to subtract 90 degrees because 0 degrees means horizontal on Silverlight for Windows Embedded and usually a clock 0 is in the top position of the dial. The code of the RotateHand function uses transforms to rotate our clock hands on the screen: // rotates a Hand HRESULT RotateHand(float angle,IXRFrameworkElement* Hand) { HRESULT retcode; IXRRotateTransformPtr rotatetransform; IXRApplicationPtr app;   if (FAILED(retcode=GetXRApplicationInstance(&app))) return retcode;   if (FAILED(retcode=app->CreateObject(IID_IXRRotateTransform,&rotatetransform))) return retcode;     if (FAILED(retcode=rotatetransform->SetAngle(angle))) return retcode;   if (FAILED(retcode=rotatetransform->SetCenterX(0.0))) return retcode;   float height;   if (FAILED(retcode==Hand->GetActualHeight(&height))) return retcode;   if (FAILED(retcode=rotatetransform->SetCenterY(height/2))) return retcode; if (FAILED(retcode=Hand->SetRenderTransform(rotatetransform))) return retcode;   return S_OK; } It creates a IXRotateTransform object, set its rotation angle and origin (the default origin is at the top-left corner of our Grid panel, we move it in the vertical center to keep the hand rotating around a single point in a more “clock like” way. Then we can apply the transform to our UI object using SetRenderTransform. Every UI element (derived from IXRFrameworkElement) can be rotated! And using different subclasses of IXRTransform also moved, scaled, skewed and distorted in many ways. You can also concatenate multiple transforms and apply them at once suing a IXRTransformGroup object. The XAML engine uses vector graphics and object will not look “pixelated” when they are rotated or scaled. As usual you can download the code here: http://cid-9b7b0aefe3514dc5.skydrive.live.com/self.aspx/.Public/Clock.zip If you read up to (down to?) this point you seem to be interested in Silverlight for Windows Embedded. If you want me to discuss some specific topic, please feel free to point it out in the comments! Technorati Tags: Silverlight for Windows Embedded,Windows CE

  Read the article

• SQL SERVER – DMV sys.dm_exec_describe_first_result_set_for_object – Describes the First Result Metadata for the Module

  - by pinaldave

  Here is another interesting follow up blog post of SQL SERVER – sp_describe_first_result_set New System Stored Procedure in SQL Server 2012. While I was writing earlier blog post I had come across DMV sys.dm_exec_describe_first_result_set_for_object as well. I found that SQL Server 2012 is providing all this quick and new features which quite often we miss  to learn it and when in future someone demonstrates the same to us, we express our surprise on the subject. DMV sys.dm_exec_describe_first_result_set_for_object returns result set which describes the columns used in the stored procedure. Here is the quick example. Let us first create stored procedure. USE [AdventureWorks] GO ALTER PROCEDURE [dbo].[CompSP] AS SELECT [DepartmentID] id ,[Name] n ,[GroupName] gn FROM [HumanResources].[Department] GO Now let us run following two DMV which gives us meta data description of the stored procedure passed as a parameter. Option1: Pass second parameter @include_browse_information as a 0. SELECT * FROM sys.dm_exec_describe_first_result_set_for_object ( OBJECT_ID('[dbo].[CompSP]'),0) AS Table1 GO Option2: Pass second parameter @include_browse_information as a 1. SELECT * FROM sys.dm_exec_describe_first_result_set_for_object ( OBJECT_ID('[dbo].[CompSP]'),1) AS Table1 GO Here is the result of Option1 and Option2. If you see the result, there is absolutely no difference between the results. Both of the resultset are returning column names which are aliased in the stored procedure. Let us scroll on the right side and you will notice that there is clear difference in some columns. You will see in second resultset source_database, Source_schema as well few other columns are reporting original table instead of NULL values. When @include_browse_information result is set to 1 it will provide the columns details of the underlying table. I have just discovered this DMV, I have yet to use it in production code and find out where exactly I will use this DMV. Do you have any idea? Does any thing comes up to your mind where this DMV can be helpful. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL DMV, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• Validating data to nest if or not within try and catch

  - by Skippy

  I am validating data, in this case I want one of three ints. I am asking this question, as it is the fundamental principle I'm interested in. This is a basic example, but I am developing best practices now, so when things become more complicated later, I am better equipped to manage them. Is it preferable to have the try and catch followed by the condition: public static int getProcType() { try { procType = getIntInput("Enter procedure type -\n" + " 1 for Exploratory,\n" + " 2 for Reconstructive, \n" + "3 for Follow up: \n"); } catch (NumberFormatException ex) { System.out.println("Error! Enter a valid option!"); getProcType(); } if (procType == 1 || procType == 2 || procType == 3) { hrlyRate = hrlyRate(procType); procedure = procedure(procType); } else { System.out.println("Error! Enter a valid option!"); getProcType(); } return procType; } Or is it better to put the if within the try and catch? public static int getProcType() { try { procType = getIntInput("Enter procedure type -\n" + " 1 for Exploratory,\n" + " 2 for Reconstructive, \n" + "3 for Follow up: \n"); if (procType == 1 || procType == 2 || procType == 3) { hrlyRate = hrlyRate(procType); procedure = procedure(procType); } else { System.out.println("Error! Enter a valid option!"); getProcType(); } } catch (NumberFormatException ex) { System.out.println("Error! Enter a valid option!"); getProcType(); } return procType; } I am thinking the if within the try, may be quicker, but also may be clumsy. Which would be better, as my programming becomes more advanced?

  Read the article

• Delphi: EInvalidOp in neural network class (TD-lambda)

  - by user89818

  I have the following draft for a neural network class. This neural network should learn with TD-lambda. It is started by calling the getRating() function. But unfortunately, there is an EInvalidOp (invalid floading point operation) error after about 1000 iterations in the following lines: neuronsHidden[j] := neuronsHidden[j]+neuronsInput[t][i]*weightsInput[i][j]; // input -> hidden weightsHidden[j][k] := weightsHidden[j][k]+LEARNING_RATE_HIDDEN*tdError[k]*eligibilityTraceOutput[j][k]; // adjust hidden->output weights according to TD-lambda Why is this error? I can't find the mistake in my code :( Can you help me? Thank you very much in advance! unit uNeuronalesNetz; interface uses Windows, Messages, SysUtils, Variants, Classes, Graphics, Controls, Forms, Dialogs, ExtCtrls, StdCtrls, Grids, Menus, Math; const NEURONS_INPUT = 43; // number of neurons in the input layer NEURONS_HIDDEN = 60; // number of neurons in the hidden layer NEURONS_OUTPUT = 1; // number of neurons in the output layer NEURONS_TOTAL = NEURONS_INPUT+NEURONS_HIDDEN+NEURONS_OUTPUT; // total number of neurons in the network MAX_TIMESTEPS = 42; // maximum number of timesteps possible (after 42 moves: board is full) LEARNING_RATE_INPUT = 0.25; // in ideal case: decrease gradually in course of training LEARNING_RATE_HIDDEN = 0.15; // in ideal case: decrease gradually in course of training GAMMA = 0.9; LAMBDA = 0.7; // decay parameter for eligibility traces type TFeatureVector = Array[1..43] of SmallInt; // definition of the array type TFeatureVector TArtificialNeuralNetwork = class // definition of the class TArtificialNeuralNetwork private // GENERAL SETTINGS START learningMode: Boolean; // does the network learn and change its weights? // GENERAL SETTINGS END // NETWORK CONFIGURATION START neuronsInput: Array[1..MAX_TIMESTEPS] of Array[1..NEURONS_INPUT] of Extended; // array of all input neurons (their values) for every timestep neuronsHidden: Array[1..NEURONS_HIDDEN] of Extended; // array of all hidden neurons (their values) neuronsOutput: Array[1..NEURONS_OUTPUT] of Extended; // array of output neurons (their values) weightsInput: Array[1..NEURONS_INPUT] of Array[1..NEURONS_HIDDEN] of Extended; // array of weights: input->hidden weightsHidden: Array[1..NEURONS_HIDDEN] of Array[1..NEURONS_OUTPUT] of Extended; // array of weights: hidden->output // NETWORK CONFIGURATION END // LEARNING SETTINGS START outputBefore: Array[1..NEURONS_OUTPUT] of Extended; // the network's output value in the last timestep (the one before) eligibilityTraceHidden: Array[1..NEURONS_INPUT] of Array[1..NEURONS_HIDDEN] of Array[1..NEURONS_OUTPUT] of Extended; // array of eligibility traces: hidden layer eligibilityTraceOutput: Array[1..NEURONS_TOTAL] of Array[1..NEURONS_TOTAL] of Extended; // array of eligibility traces: output layer reward: Array[1..MAX_TIMESTEPS] of Array[1..NEURONS_OUTPUT] of Extended; // the reward value for all output neurons in every timestep tdError: Array[1..NEURONS_OUTPUT] of Extended; // the network's error value for every single output neuron t: Byte; // current timestep cyclesTrained: Integer; // number of cycles trained so far (learning rates could be decreased accordingly) last50errors: Array[1..50] of Extended; // LEARNING SETTINGS END public constructor Create; // create the network object and do the initialization procedure UpdateEligibilityTraces; // update the eligibility traces for the hidden and output layer procedure tdLearning; // learning algorithm: adjust the network's weights procedure ForwardPropagation; // propagate the input values through the network to the output layer function getRating(state: TFeatureVector; explorative: Boolean): Extended; // get the rating for a given state (feature vector) function HyperbolicTangent(x: Extended): Extended; // calculate the hyperbolic tangent [-1;1] procedure StartNewCycle; // start a new cycle with everything set to default except for the weights procedure setLearningMode(activated: Boolean=TRUE); // switch the learning mode on/off procedure setInputs(state: TFeatureVector); // transfer the given feature vector to the input layer (set input neurons' values) procedure setReward(currentReward: SmallInt); // set the reward for the current timestep (with learning then or without) procedure nextTimeStep; // increase timestep t function getCyclesTrained(): Integer; // get the number of cycles trained so far procedure Visualize(imgHidden: Pointer); // visualize the neural network's hidden layer end; implementation procedure TArtificialNeuralNetwork.UpdateEligibilityTraces; var i, j, k: Integer; begin // how worthy is a weight to be adjusted? for j := 1 to NEURONS_HIDDEN do begin for k := 1 to NEURONS_OUTPUT do begin eligibilityTraceOutput[j][k] := LAMBDA*eligibilityTraceOutput[j][k]+(neuronsOutput[k]*(1-neuronsOutput[k]))*neuronsHidden[j]; for i := 1 to NEURONS_INPUT do begin eligibilityTraceHidden[i][j][k] := LAMBDA*eligibilityTraceHidden[i][j][k]+(neuronsOutput[k]*(1-neuronsOutput[k]))*weightsHidden[j][k]*neuronsHidden[j]*(1-neuronsHidden[j])*neuronsInput[t][i]; end; end; end; end; procedure TArtificialNeuralNetwork.setReward; VAR i: Integer; begin for i := 1 to NEURONS_OUTPUT do begin // +1 = player A wins // 0 = draw // -1 = player B wins reward[t][i] := currentReward; end; end; procedure TArtificialNeuralNetwork.tdLearning; var i, j, k: Integer; begin if learningMode then begin for k := 1 to NEURONS_OUTPUT do begin if reward[t][k] = 0 then begin tdError[k] := GAMMA*neuronsOutput[k]-outputBefore[k]; // network's error value when reward is 0 end else begin tdError[k] := reward[t][k]-outputBefore[k]; // network's error value in the final state (reward received) end; for j := 1 to NEURONS_HIDDEN do begin weightsHidden[j][k] := weightsHidden[j][k]+LEARNING_RATE_HIDDEN*tdError[k]*eligibilityTraceOutput[j][k]; // adjust hidden->output weights according to TD-lambda for i := 1 to NEURONS_INPUT do begin weightsInput[i][j] := weightsInput[i][j]+LEARNING_RATE_INPUT*tdError[k]*eligibilityTraceHidden[i][j][k]; // adjust input->hidden weights according to TD-lambda end; end; end; end; end; procedure TArtificialNeuralNetwork.ForwardPropagation; var i, j, k: Integer; begin for j := 1 to NEURONS_HIDDEN do begin neuronsHidden[j] := 0; for i := 1 to NEURONS_INPUT do begin neuronsHidden[j] := neuronsHidden[j]+neuronsInput[t][i]*weightsInput[i][j]; // input -> hidden end; neuronsHidden[j] := HyperbolicTangent(neuronsHidden[j]); // activation of hidden neuron j end; for k := 1 to NEURONS_OUTPUT do begin neuronsOutput[k] := 0; for j := 1 to NEURONS_HIDDEN do begin neuronsOutput[k] := neuronsOutput[k]+neuronsHidden[j]*weightsHidden[j][k]; // hidden -> output end; neuronsOutput[k] := HyperbolicTangent(neuronsOutput[k]); // activation of output neuron k end; end; procedure TArtificialNeuralNetwork.setLearningMode; begin learningMode := activated; end; constructor TArtificialNeuralNetwork.Create; var i, j, k: Integer; begin inherited Create; Randomize; // initialize random numbers generator learningMode := TRUE; cyclesTrained := -2; // only set to -2 because it will be increased twice in the beginning StartNewCycle; for j := 1 to NEURONS_HIDDEN do begin for k := 1 to NEURONS_OUTPUT do begin weightsHidden[j][k] := abs(Random-0.5); // initialize weights: 0 <= random < 0.5 end; for i := 1 to NEURONS_INPUT do begin weightsInput[i][j] := abs(Random-0.5); // initialize weights: 0 <= random < 0.5 end; end; for i := 1 to 50 do begin last50errors[i] := 0; end; end; procedure TArtificialNeuralNetwork.nextTimeStep; begin t := t+1; end; procedure TArtificialNeuralNetwork.StartNewCycle; var i, j, k, m: Integer; begin t := 1; // start in timestep 1 cyclesTrained := cyclesTrained+1; // increase the number of cycles trained so far for j := 1 to NEURONS_HIDDEN do begin neuronsHidden[j] := 0; for k := 1 to NEURONS_OUTPUT do begin eligibilityTraceOutput[j][k] := 0; outputBefore[k] := 0; neuronsOutput[k] := 0; for m := 1 to MAX_TIMESTEPS do begin reward[m][k] := 0; end; end; for i := 1 to NEURONS_INPUT do begin for k := 1 to NEURONS_OUTPUT do begin eligibilityTraceHidden[i][j][k] := 0; end; end; end; end; function TArtificialNeuralNetwork.getCyclesTrained; begin result := cyclesTrained; end; procedure TArtificialNeuralNetwork.setInputs; var k: Integer; begin for k := 1 to NEURONS_INPUT do begin neuronsInput[t][k] := state[k]; end; end; function TArtificialNeuralNetwork.getRating; begin setInputs(state); ForwardPropagation; result := neuronsOutput[1]; if not explorative then begin tdLearning; // adjust the weights according to TD-lambda ForwardPropagation; // calculate the network's output again outputBefore[1] := neuronsOutput[1]; // set outputBefore which will then be used in the next timestep UpdateEligibilityTraces; // update the eligibility traces for the next timestep nextTimeStep; // go to the next timestep end; end; function TArtificialNeuralNetwork.HyperbolicTangent; begin if x > 5500 then // prevent overflow result := 1 else result := (Exp(2*x)-1)/(Exp(2*x)+1); end; end.

  Read the article

• Cisco ASA: How to route PPPoE-assigned subnet?

  - by Martijn Heemels

  We've just received a fiber uplink, and I'm trying to configure our Cisco ASA 5505 to properly use it. The provider requires us to connect via PPPoE, and I managed to configure the ASA as a PPPoE client and establish a connection. The ASA is assigned an IP address by PPPoE, and I can ping out from the ASA to the internet, but I should have access to an entire /28 subnet. I can't figure out how to get that subnet configured on the ASA, so that I can route or NAT the available public addresses to various internal hosts. My assigned range is: 188.xx.xx.176/28 The address I get via PPPoE is 188.xx.xx.177/32, which according to our provider is our Default Gateway address. They claim the subnet is correctly routed to us on their side. How does the ASA know which range it is responsible for on the Fiber interface? How do I use the addresses from my range? To clarify my config; The ASA is currently configured to default-route to our ADSL uplink on port Ethernet0/0 (interface vlan2, nicknamed Outside). The fiber is connected to port Ethernet0/2 (interface vlan50, nicknamed Fiber) so I can configure and test it before making it the default route. Once I'm clear on how to set it all up, I'll fully replace the Outside interface with Fiber. My config (rather long): : Saved : ASA Version 8.3(2)4 ! hostname gw domain-name example.com enable password ****** encrypted passwd ****** encrypted names name 10.10.1.0 Inside-dhcp-network description Desktops and clients that receive their IP via DHCP name 10.10.0.208 svn.example.com description Subversion server name 10.10.0.205 marvin.example.com description LAMP development server name 10.10.0.206 dns.example.com description DNS, DHCP, NTP ! interface Vlan2 description Old ADSL WAN connection nameif outside security-level 0 ip address 192.168.1.2 255.255.255.252 ! interface Vlan10 description LAN vlan 10 Regular LAN traffic nameif inside security-level 100 ip address 10.10.0.254 255.255.0.0 ! interface Vlan11 description LAN vlan 11 Lab/test traffic nameif lab security-level 90 ip address 10.11.0.254 255.255.0.0 ! interface Vlan20 description LAN vlan 20 ISCSI traffic nameif iscsi security-level 100 ip address 10.20.0.254 255.255.0.0 ! interface Vlan30 description LAN vlan 30 DMZ traffic nameif dmz security-level 50 ip address 10.30.0.254 255.255.0.0 ! interface Vlan40 description LAN vlan 40 Guests access to the internet nameif guests security-level 50 ip address 10.40.0.254 255.255.0.0 ! interface Vlan50 description New WAN Corporate Internet over fiber nameif fiber security-level 0 pppoe client vpdn group KPN ip address pppoe ! interface Ethernet0/0 switchport access vlan 2 speed 100 duplex full ! interface Ethernet0/1 switchport trunk allowed vlan 10,11,30,40 switchport trunk native vlan 10 switchport mode trunk ! interface Ethernet0/2 switchport access vlan 50 speed 100 duplex full ! interface Ethernet0/3 shutdown ! interface Ethernet0/4 shutdown ! interface Ethernet0/5 switchport access vlan 20 ! interface Ethernet0/6 shutdown ! interface Ethernet0/7 shutdown ! boot system disk0:/asa832-4-k8.bin ftp mode passive clock timezone CEST 1 clock summer-time CEDT recurring last Sun Mar 2:00 last Sun Oct 3:00 dns domain-lookup inside dns server-group DefaultDNS name-server dns.example.com domain-name example.com same-security-traffic permit inter-interface same-security-traffic permit intra-interface object network inside-net subnet 10.10.0.0 255.255.0.0 object network svn.example.com host 10.10.0.208 object network marvin.example.com host 10.10.0.205 object network lab-net subnet 10.11.0.0 255.255.0.0 object network dmz-net subnet 10.30.0.0 255.255.0.0 object network guests-net subnet 10.40.0.0 255.255.0.0 object network dhcp-subnet subnet 10.10.1.0 255.255.255.0 description DHCP assigned addresses on Vlan 10 object network Inside-vpnpool description Pool of assignable addresses for VPN clients object network vpn-subnet subnet 10.10.3.0 255.255.255.0 description Address pool assignable to VPN clients object network dns.example.com host 10.10.0.206 description DNS, DHCP, NTP object-group service iscsi tcp description iscsi storage traffic port-object eq 3260 access-list outside_access_in remark Allow access from outside to HTTP on svn. access-list outside_access_in extended permit tcp any object svn.example.com eq www access-list Insiders!_splitTunnelAcl standard permit 10.10.0.0 255.255.0.0 access-list iscsi_access_in remark Prevent disruption of iscsi traffic from outside the iscsi vlan. access-list iscsi_access_in extended deny tcp any interface iscsi object-group iscsi log warnings ! snmp-map DenyV1 deny version 1 ! pager lines 24 logging enable logging timestamp logging asdm-buffer-size 512 logging monitor warnings logging buffered warnings logging history critical logging asdm errors logging flash-bufferwrap logging flash-minimum-free 4000 logging flash-maximum-allocation 2000 mtu outside 1500 mtu inside 1500 mtu lab 1500 mtu iscsi 9000 mtu dmz 1500 mtu guests 1500 mtu fiber 1492 ip local pool DHCP_VPN 10.10.3.1-10.10.3.20 mask 255.255.0.0 ip verify reverse-path interface outside no failover icmp unreachable rate-limit 10 burst-size 5 asdm image disk0:/asdm-635.bin asdm history enable arp timeout 14400 nat (inside,outside) source static any any destination static vpn-subnet vpn-subnet ! object network inside-net nat (inside,outside) dynamic interface object network svn.example.com nat (inside,outside) static interface service tcp www www object network lab-net nat (lab,outside) dynamic interface object network dmz-net nat (dmz,outside) dynamic interface object network guests-net nat (guests,outside) dynamic interface access-group outside_access_in in interface outside access-group iscsi_access_in in interface iscsi route outside 0.0.0.0 0.0.0.0 192.168.1.1 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 dynamic-access-policy-record DfltAccessPolicy aaa-server SBS2003 protocol radius aaa-server SBS2003 (inside) host 10.10.0.204 timeout 5 key ***** aaa authentication enable console SBS2003 LOCAL aaa authentication ssh console SBS2003 LOCAL aaa authentication telnet console SBS2003 LOCAL http server enable http 10.10.0.0 255.255.0.0 inside snmp-server host inside 10.10.0.207 community ***** version 2c snmp-server location Server room snmp-server contact [email protected] snmp-server community ***** snmp-server enable traps snmp authentication linkup linkdown coldstart snmp-server enable traps syslog crypto ipsec transform-set TRANS_ESP_AES-256_SHA esp-aes-256 esp-sha-hmac crypto ipsec transform-set TRANS_ESP_AES-256_SHA mode transport crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 crypto dynamic-map outside_dyn_map 20 set pfs group5 crypto dynamic-map outside_dyn_map 20 set transform-set TRANS_ESP_AES-256_SHA crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5 crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP crypto map outside_map interface outside crypto isakmp enable outside crypto isakmp policy 1 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 telnet 10.10.0.0 255.255.0.0 inside telnet timeout 5 ssh scopy enable ssh 10.10.0.0 255.255.0.0 inside ssh timeout 5 ssh version 2 console timeout 30 management-access inside vpdn group KPN request dialout pppoe vpdn group KPN localname INSIDERS vpdn group KPN ppp authentication pap vpdn username INSIDERS password ***** store-local dhcpd address 10.40.1.0-10.40.1.100 guests dhcpd dns 8.8.8.8 8.8.4.4 interface guests dhcpd update dns interface guests dhcpd enable guests ! threat-detection basic-threat threat-detection scanning-threat threat-detection statistics host number-of-rate 2 threat-detection statistics port number-of-rate 3 threat-detection statistics protocol number-of-rate 3 threat-detection statistics access-list threat-detection statistics tcp-intercept rate-interval 30 burst-rate 400 average-rate 200 ntp server dns.example.com source inside prefer webvpn group-policy DfltGrpPolicy attributes vpn-tunnel-protocol IPSec l2tp-ipsec group-policy Insiders! internal group-policy Insiders! attributes wins-server value 10.10.0.205 dns-server value 10.10.0.206 vpn-tunnel-protocol IPSec l2tp-ipsec split-tunnel-policy tunnelspecified split-tunnel-network-list value Insiders!_splitTunnelAcl default-domain value example.com username martijn password ****** encrypted privilege 15 username marcel password ****** encrypted privilege 15 tunnel-group DefaultRAGroup ipsec-attributes pre-shared-key ***** tunnel-group Insiders! type remote-access tunnel-group Insiders! general-attributes address-pool DHCP_VPN authentication-server-group SBS2003 LOCAL default-group-policy Insiders! tunnel-group Insiders! ipsec-attributes pre-shared-key ***** ! class-map global-class match default-inspection-traffic class-map type inspect http match-all asdm_medium_security_methods match not request method head match not request method post match not request method get ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum 512 policy-map type inspect http http_inspection_policy parameters protocol-violation action drop-connection policy-map global-policy class global-class inspect dns inspect esmtp inspect ftp inspect h323 h225 inspect h323 ras inspect http inspect icmp inspect icmp error inspect mgcp inspect netbios inspect pptp inspect rtsp inspect snmp DenyV1 ! service-policy global-policy global smtp-server 123.123.123.123 prompt hostname context call-home profile CiscoTAC-1 no active destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address email [email protected] destination transport-method http subscribe-to-alert-group diagnostic subscribe-to-alert-group environment subscribe-to-alert-group inventory periodic monthly subscribe-to-alert-group configuration periodic monthly subscribe-to-alert-group telemetry periodic daily hpm topN enable Cryptochecksum:a76bbcf8b19019771c6d3eeecb95c1ca : end asdm image disk0:/asdm-635.bin asdm location svn.example.com 255.255.255.255 inside asdm location marvin.example.com 255.255.255.255 inside asdm location dns.example.com 255.255.255.255 inside asdm history enable

  Read the article

• 12c - Utl_Call_Stack...

  - by noreply(at)blogger.com (Thomas Kyte)

  Over the next couple of months, I'll be writing about some cool new little features of Oracle Database 12c - things that might not make the front page of Oracle.com.  I'm going to start with a new package - UTL_CALL_STACK.In the past, developers have had access to three functions to try to figure out "where the heck am I in my code", they were:dbms_utility.format_call_stackdbms_utility.format_error_backtracedbms_utility.format_error_stackNow these routines, while useful, were of somewhat limited use.  Let's look at the format_call_stack routine for a reason why.  Here is a procedure that will just print out the current call stack for us:ops$tkyte%ORA12CR1> create or replace  2  procedure Print_Call_Stack  3  is  4  begin  5    DBMS_Output.Put_Line(DBMS_Utility.Format_Call_Stack());  6  end;  7  /Procedure created.Now, if we have a package - with nested functions and even duplicated function names:ops$tkyte%ORA12CR1> create or replace  2  package body Pkg is  3    procedure p  4    is  5      procedure q  6      is  7        procedure r  8        is  9          procedure p is 10          begin 11            Print_Call_Stack(); 12            raise program_error; 13          end p; 14        begin 15          p(); 16        end r; 17      begin 18        r(); 19      end q; 20    begin 21      q(); 22    end p; 23  end Pkg; 24  /Package body created.When we execute the procedure PKG.P - we'll see as a result:ops$tkyte%ORA12CR1> exec pkg.p----- PL/SQL Call Stack -----  object      line  object  handle    number  name0x6e891528         4  procedure OPS$TKYTE.PRINT_CALL_STACK0x6ec4a7c0        10  package body OPS$TKYTE.PKG0x6ec4a7c0        14  package body OPS$TKYTE.PKG0x6ec4a7c0        17  package body OPS$TKYTE.PKG0x6ec4a7c0        20  package body OPS$TKYTE.PKG0x76439070         1  anonymous blockBEGIN pkg.p; END;*ERROR at line 1:ORA-06501: PL/SQL: program errorORA-06512: at "OPS$TKYTE.PKG", line 11ORA-06512: at "OPS$TKYTE.PKG", line 14ORA-06512: at "OPS$TKYTE.PKG", line 17ORA-06512: at "OPS$TKYTE.PKG", line 20ORA-06512: at line 1The bit in red above is the output from format_call_stack whereas the bit in black is the error message returned to the client application (it would also be available to you via the format_error_backtrace API call). As you can see - it contains useful information but to use it you would need to parse it - and that can be trickier than it seems.  The format of those strings is not set in stone, they have changed over the years (I wrote the "who_am_i", "who_called_me" functions, I did that by parsing these strings - trust me, they change over time!).Starting in 12c - we'll have structured access to the call stack and a series of API calls to interrogate this structure.  I'm going to rewrite the print_call_stack function as follows:ops$tkyte%ORA12CR1> create or replace 2  procedure Print_Call_Stack  3  as  4    Depth pls_integer := UTL_Call_Stack.Dynamic_Depth();  5    6    procedure headers  7    is  8    begin  9        dbms_output.put_line( 'Lexical   Depth   Line    Name' ); 10        dbms_output.put_line( 'Depth             Number      ' ); 11        dbms_output.put_line( '-------   -----   ----    ----' ); 12    end headers; 13    procedure print 14    is 15    begin 16        headers; 17        for j in reverse 1..Depth loop 18          DBMS_Output.Put_Line( 19            rpad( utl_call_stack.lexical_depth(j), 10 ) || 20                    rpad( j, 7) || 21            rpad( To_Char(UTL_Call_Stack.Unit_Line(j), '99'), 9 ) || 22            UTL_Call_Stack.Concatenate_Subprogram 23                       (UTL_Call_Stack.Subprogram(j))); 24        end loop; 25    end; 26  begin 27    print; 28  end; 29  /Here we are able to figure out what 'depth' we are in the code (utl_call_stack.dynamic_depth) and then walk up the stack using a loop.  We will print out the lexical_depth, along with the line number within the unit we were executing plus - the unit name.  And not just any unit name, but the fully qualified, all of the way down to the subprogram name within a package.  Not only that - but down to the subprogram name within a subprogram name within a subprogram name.  For example - running the PKG.P procedure again results in:ops$tkyte%ORA12CR1> exec pkg.pLexical   Depth   Line    NameDepth             Number-------   -----   ----    ----1         6       20      PKG.P2         5       17      PKG.P.Q3         4       14      PKG.P.Q.R4         3       10      PKG.P.Q.R.P0         2       26      PRINT_CALL_STACK1         1       17      PRINT_CALL_STACK.PRINTBEGIN pkg.p; END;*ERROR at line 1:ORA-06501: PL/SQL: program errorORA-06512: at "OPS$TKYTE.PKG", line 11ORA-06512: at "OPS$TKYTE.PKG", line 14ORA-06512: at "OPS$TKYTE.PKG", line 17ORA-06512: at "OPS$TKYTE.PKG", line 20ORA-06512: at line 1This time - we get much more than just a line number and a package name as we did previously with format_call_stack.  We not only got the line number and package (unit) name - we got the names of the subprograms - we can see that P called Q called R called P as nested subprograms.  Also note that we can see a 'truer' calling level with the lexical depth, we can see we "stepped" out of the package to call print_call_stack and that in turn called another nested subprogram.This new package will be a nice addition to everyone's error logging packages.  Of course there are other functions in there to get owner names, the edition in effect when the code was executed and more. See UTL_CALL_STACK for all of the details.

  Read the article

• ASP.NET: Unable to automatically step into the server. The remote procedure could not be debugged.

  - by mark smith

  Hi there, can anyone help? I am having a problem stepping into code which is a website hosted on IIS7. Basically i have a test class which calls a WCF service like so ISecurityService service = new SecurityServiceClient(); MembershipUser membershipUser = null; membershipUser = service.GetMembershipUser("Mark"); // THIS LINE FAILS!!! I get the following error but i have everything enabled as far as i know i.e. <compilation debug="true" targetFramework="4.0" /> Here is the error msg, i would appreciated any feedback.. If I don't try and step into the line above then all works ok Microsoft Visual Studio Unable to automatically step into the server. The remote procedure could not be debugged. This usually indicates that debugging has not been enabled on the server. See help for more information. OK Help

  Read the article

• Changing a table-valued function that a stored procedure calls is not recognized?

  - by Peter

  Hey all I have a stored procedure sp that calls a table-valued function tvf. Sometimes I modify the tvf but when subsequently executing sp, the output from sp is the same as before the modification. It seems like it is cached or compiled or something. If I make some dummy change to the sp, then I get the right output of the sp. Is there some way, I can overcome this problem? In Oracle it is possible to re-compile all stored procedures, but I haven't been able to figure out how to do this in SQL Server? Any help is highly appreciated.

  Read the article

• Is it possible to call a procedure within an SQL statement?

  - by darren

  Hi everyone I thought I would use a stored routine to clean up some of my more complex SQL statements. From what I've read, it seems impossible to use a stored procedure within an sql statement, and a stored function only returns a single value when what I need is a result set. I am using mySQL v5.0 SELECT p.`id`, gi.`id` FROM `sport`.`players` AS p JOIN `sport`.`gameinstances` AS gi ON p.`id` = gi.`playerid` WHERE (p.`playerid` IN (CALL findPlayers`("Canada", "2002"))) AND (gi.`instanceid` NOT IN (CALL findGameInstances`("Canada", "2002"))); For example, the procedures 'findPlayers' and 'findGameInstances' are are stored routines that execute some SQL and return a result set. I would prefer not to include their code directly within the statement above.

  Read the article

• Reading from a oracle temp table in a separate procedure than the one it was populted in

  - by Bob

  I have a 2 stored procedures, the first creates an oracle temp table and the second reads from it. The temp table only has scope for that session. I'm calling the procedures from .Net and the second procedure never returns any results. However if I use the same sprocs and parameters in SQL*Plus it works fine. I've tried creating an Oracle Transaction object and had hoped I'd be able to read the tables in while still using the same transaction - trying to emulate an SQL Plus type of single connection environment. Any ideas what I'm doing wrong??

  Read the article

< Previous Page | 63 64 65 66 67 68 69 70 71 72 73 74  | Next Page >