Search Results

Search found 36619 results on 1465 pages for 'damn small linux'.

Page 670/1465 | < Previous Page | 666 667 668 669 670 671 672 673 674 675 676 677  | Next Page >

• Using smartctl to get vendor specific Attributes from ssd drive behind a SmartArray P410 controller

  - by Lairsdragon

  Recently I have deployed some HP server with SSD's behind a SmartArray P410 controller. While not official supported from HP the server work well sofar. Now I like to get wear level info's, error statistics etc from the drive. While the SA P410 supports a passthru of the SMART Command to a single drive in the array the output I was not able to the the interesting things from the drive. In this case especially the value the Wear level indicator is from interest for me (Attr.ID 233), but this is ony present if the drive is directly attanched to a SATA Controller. smartctl on directly connected ssd: # smartctl -A /dev/sda smartctl version 5.38 [x86_64-unknown-linux-gnu] Copyright (C) 2002-8 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF READ SMART DATA SECTION === SMART Attributes Data Structure revision number: 5 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 3 Spin_Up_Time 0x0000 100 000 000 Old_age Offline In_the_past 0 4 Start_Stop_Count 0x0000 100 000 000 Old_age Offline In_the_past 0 5 Reallocated_Sector_Ct 0x0002 100 100 000 Old_age Always - 0 9 Power_On_Hours 0x0002 100 100 000 Old_age Always - 8561 12 Power_Cycle_Count 0x0002 100 100 000 Old_age Always - 55 192 Power-Off_Retract_Count 0x0002 100 100 000 Old_age Always - 29 232 Unknown_Attribute 0x0003 100 100 010 Pre-fail Always - 0 233 Unknown_Attribute 0x0002 088 088 000 Old_age Always - 0 225 Load_Cycle_Count 0x0000 198 198 000 Old_age Offline - 508509 226 Load-in_Time 0x0002 255 000 000 Old_age Always In_the_past 0 227 Torq-amp_Count 0x0002 000 000 000 Old_age Always FAILING_NOW 0 228 Power-off_Retract_Count 0x0002 000 000 000 Old_age Always FAILING_NOW 0 smartctl on P410 connected ssd: # ./smartctl -A -d cciss,0 /dev/cciss/c1d0 smartctl 5.39.1 2010-01-28 r3054 [x86_64-unknown-linux-gnu] (local build) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net (Right, it is complety empty) smartctl on P410 connected hdd: # ./smartctl -A -d cciss,0 /dev/cciss/c0d0 smartctl 5.39.1 2010-01-28 r3054 [x86_64-unknown-linux-gnu] (local build) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net Current Drive Temperature: 27 C Drive Trip Temperature: 68 C Vendor (Seagate) cache information Blocks sent to initiator = 1871654030 Blocks received from initiator = 1360012929 Blocks read from cache and sent to initiator = 2178203797 Number of read and write commands whose size <= segment size = 46052239 Number of read and write commands whose size > segment size = 0 Vendor (Seagate/Hitachi) factory information number of hours powered up = 3363.25 number of minutes until next internal SMART test = 12 Do I hunt here a bug, or is this a limitation of the p410 SMART cmd Passthru?

  Read the article

• Defeating the RAID5 write hole with ZFS (but not RAID-Z) [closed]

  - by Michael Shick

  I'm setting up a long-term storage system for keeping personal backups and archives. I plan to have RAID5 starting with a relatively small array and adding devices over time to expand storage. I may also want to convert to RAID6 down the road when the array gets large. Linux md is a perfect fit for this use case since it allows both of the changes I want on a live array and performance isn't at all important. Low cost is also great. Now, I also want to defend against file corruption, so it looked like a RAID-Z1 would be a good fit, but evidently I would only be able to add additional RAID5 (RAID-Z1) sets at a time rather than individual drives. I want to be able to add drives one at a time, and I don't want to have to give up another device for parity with every expansion. So at this point, it looks like I'll be using a plain ZFS filesystem on top of an md RAID5 array. That brings me to my primary question: Will ZFS be able to correct or at least detect corruption resulting from the RAID5 write hole? Additionally, any other caveats or advice for such a set up is welcome. I'll probably be using Debian, but I'll definitely be using Linux since I'm familiar with it, so that means only as new a version of ZFS as is available for Linux (via ZFS-FUSE or so).

  Read the article

• Mutli-processor workstation as a workstation/server

  - by posdef

  I work in a research institute and a number of programs we use are computationally intensive (I actually wrote one of them). Right now we have one computer that is dedicated for one of these programs (with local accounts only, as in users physically sitting in front of that pc) and the other programs are run on individual workstations assigned to people. I have been looking around to common brands such as Dell and HP, for a some sort of a small/medium scale server, which can be used as a workhorse by sending tasks remotely. It appears as if there is nothing in between workstations with one 6-core processor and a bunch of extras (like fancy graphics etc) and rack mount servers with ridiculous amount of RAM and HDD expansion capabilities but still relatively little number of processors/cores. I wonder if what I am looking for is such a small niche product? Are there other solutions that I might not be aware of? Does anyone know of a multi proc- multi-core workstation/server that is still within the reasonable

  Read the article

• Tool to display FPS of machine

  - by dotnetdev

  Hi, Is there a free and small tool which can monitor the FPS my OS/PC is running at? Thanks

  Read the article

• Configure IE to use MS Word Viewer as .doc viewer on Citrix server with Office installed

  - by Adam Towne

  We have a small number of citrix servers that all have office installed. Only a small subset of users have access to office. Everyone is set to open office documents with the free viewers on the Citrix servers. We control access to office through NTFS permissions. We now have a large number of users who need to be able to view office documents from a webpage. Opening office files normally works fine. When users open the office documents from the link in a webpage, it ignores the file associations and attempts to open the document with the full office program. How can I change the program that IE uses to open office documents, or how can I force it to use the file associations I set in the operating system?

  Read the article

• Building a DVR system for use with custom windows application (video analytics)

  - by Michael

  Is there a good PCIe DVR capture card that has at least 4 channels as well as the hardware encoding? It would have to have decent driver support in Windows xp or windows 7. I have looked at various video capture cards as well as an integrated video capture card/motherboard from Huperlabs. But so far I have not found one with a decent review and that has good driver support that I can verify. A really small card would be nice because I am trying to get a fairly small form factor. Huperlabs stuff is pretty awesome but they are slow to get back to me and they bundle their analytics software with the hardware (extra cost for nothing) The dvr is being used for security.

  Read the article

• How can I get the path to a Windows service executable WITHOUT using sc qc?

  - by Jared

  I need to query a windows service for the path to it's executable via the command prompt. I think the way I would do this is:sc qc myServiceName, but when I do that, I get the following error: [SC] QueryServiceConfig FAILED 122: The data area passed to a system call is too small. [SC] GetServiceConfig needs 1094 bytes I think this means that the sc command is sending a data structure to some other library that is too small for the data that needs to be returned. Instead of SC nicely retrying with a larger data structure (1094 bytes) it bombs out and gives me this ugly error message. Thanks Micro$oft. So is there a way to work around this error? I just need the path to the executable, but will parse it out of some other text if needed.

  Read the article

• How would I modify this ffmpeg command to include 4 videos?

  - by Michael Shnitzer

  Say I had 4 videos with the following names: Main Video.mov Top Left.mov Top Right.mov Top Mid.mov and I wanted to have "Main Video" play with a picture in picture effect with boxes of videos playing in the top left, top right and top mid. Each box would have the video that is similarly named. This command will do picture in picture for 2 videos, with one video in the lower right. ffmpeg -i 2013-07-31\ 231548.MOV -vf "movie=2013-07-31\ 231722.MOV, scale=iw/5:ih/5 [small]; [in][small] overlay=main_w*0.77:main_h*0.77 [out]" -strict -2 output.mov Can someone help me update this command to work with the 4 files I mentioned above? Thanks

  Read the article

• Desktop virtualization

  - by gurpal2000

  Is there currently a proper Type 1 "desktop" hypervisor? Either free or not? This is just for tinkering around at home on some beefy Phenom machines. Basically i want to be able to run say 2 OSs on the same PC but without loading windows or a heavy flavour of linux and then use a hotkey to switch between them. I should get full performance out of them. So do i need something better than vmware workstation and/or virtualbox. I think these are "Type 2"? I already run VMWare w/s and VBox but is there a more performant solution? I saw a YouTube video from Citrix where a laptop was running XP and Vista. With the touch of a hot key they could switch between them. There was no visible underlying OS (there might be a hypervisor)? I have access to Citrix XenDesktop 3 enterprise edition evaluation. I realise this isn't for desktops but can i achieve my goal (geekiness) ? If i use the free XenServer 5.5.0 how do my client PCs access windows/linux/whatever from the xenserver? Is it via a thin client RDP type application? If so if there one for both windows and linux? Also if i do use XenServer can i use USB in either direction? What is Citrix receiver can i use that for (3) ? If so, is there some hotkey i can configure? whatever client is used to access the server software (whether it be on a different server or local) can i get full opengl/directx acceleration? what about Xen? i tried the Xen LiveCD but no clue as how to configure it. As you can see much confusion. Any help/pointers welcome. Cheers.

  Read the article

• Why are Microsoft Windows Update taking so long to install?

  - by Mathieu Pagé

  Hi, I have a question that is not related to a problem I have. Just something I'd like to understand. Why are Windows update so long? First Windows Update need to find witch updates you needs and this take about 5 minutes. What is happening behind the scene during those 5 minutes? I would have tought that it would be enough to compare the updates you already have to the complete list of updates or to check the version numbers of a couples files. Then when it comes time to install the upgrades, they're also taking a long time. Some 1 Mb updates takes 2, 3 or 5 minutes to install. What is taking so long. I would have though that it was simply a mater of backup the old file, uncompress the new files, replace the old file. This should be really fast. Is Windows doing something else? For comparison, under Linux, you can find which updates you need in about 20 seconds and installing them is usually pretty fast (The time to uncompress the files). I can do a complete updgrade of my linux machine in about 25 minutes (download 600-800 Mb of updates, hundreds of them and install them) while under windows 25 minutes is the time it needs to find witch update are needed and install about 5-10 updates. I just updated a Windows XP home from SP1a to SP3 + all other updates. It took me more than 3 hours. Doing something like that in the Linux World takes about 30 minutes. I don't want to bash Microsoft here. I genuinly want to know what they do differently that makes it so long.

  Read the article

• How to edit screen grabbed video on Windows XP?

  - by tangens

  Problem I've used CamStudio to record a presentation (fullscreen, 1280x1024, 45 min, no audio) to a small number of AVI files (10 files with about 800 MB total). Now I want to remove the initial and trailer sequences where you see start and stop of CamStudio. I'd like to remove some pauses during the video, too. Question Could you recommend some programs for Windows XP that I can use for this task? The result should be a (small - at least not bigger than the original) video format that I can play back. I've no need to create a DVD etc. Already tried I already tried MAGIX Video Deluxe 16 (Trial Version), but it takes about 2 hours to just export 10 minutes of the video and produces about 2 GB of data for this.

  Read the article

• Upgrade an Ubuntu 8.04 installation with VMware Server 1.0.8 and lots of guest OSes to Something Els

  - by Glyph

  I have an Ubuntu 8.04 (Hardy Heron) host machine which is running a whole slew of virtual machines in VMWare Server 1.0.8. Among other guest OSes, there is every release version of Ubuntu since 6.06, OpenSolaris 2009.06, and Windows XP. Right now I access these VMs from a variety of client OSes as well; Linux and Windows via the VMWare server console, and MacOS via X-forwarding the host machine's server console. I'd like to upgrade the host to Ubuntu 10.04 (Lucid Lynx), but from what I can tell, getting VMWare Server 1.x to work on a more recent version of Linux is a real pain. While VMware Server 2.x is a bit easier, it's still not packaged as Debian packages, so installing security updates is a big chore. As long as I'm upgrading anyway, I'd like to move to a virtualization solution that will allow me to automate applying updates. The options that I'm aware of right now are KVM (managed via virt-manager) and VirtualBox (as managed by its own tools or via its own libvirt bindings), but I'm open to other suggestions. For each option, I'd like to know how do I convert my guest images to the new format? am I going to have to re-activate my Windows guests (alternatively, "If the virtual hardware is different by default, can I avoid re-activation by changing some virtualization configuration to provide me with more similar virtual hardware") what are the management options like for each client OS (mac, linux, windows)? Thanks.

  Read the article

• Recovering a damaged microSDHC

  - by djechelon

  I just bought from eBay a Kingston 32GB microSDHC that was advertised as defective. The seller said that there could be formatting problems or with transfer of large files. Unfortunately, when I got it, it was a total mess. My Nikon camera doesn't read it at all (OK, maybe it doesn't support 32GB) My Linux laptop doesn't mount it: can't read superblock The same laptop refuses to mkfs.msdos because it failed whilst writing reserved sector The same laptop, under Windows, doesn't read nor format the card HTC HD2 mounts the MMC, allows me to write via USB, but is unable to open the just written files OK, folks, now you would say I would have to go through Paypal complaint... that's not that easy. I consciously bought a half-price card that was known to show some defects, and Paypal complaints take time. Obviously, I can't accept somebody sold me a completely use-less computer decoration. So I'll keep it as last option. My question is Do you know a way, under either Linux or Windows, to thoroughly scan, test and possibly repair memory cards, even if I have to lose some percentage of space because of bad sectors? If I can keep at least half of the card intact it would certainly be fine. I used to do broken sector marking with hard disks in the past. I almost forgot: MONSTR:/home/djechelon # fsck /dev/mmcblk0p1 fsck from util-linux-ng 2.17.2 dosfsck 3.0.9, 31 Jan 2010, FAT32, LFN Read 512 bytes at 0:Input/output error

  Read the article

• How to move the Windows 7 bootloader to the Windows 7 partition?

  - by pauldoo

  I recently installed Windows 7 in a triple boot setup alongside XP and Linux. When I was finished and was in the process of restoring the bootloader for Linux I discovered something strange about what Windows 7 had done. I discovered that Windows 7 had not installed a bootloader to it's own partition, and instead had instead set up a bootloader on the pre-existing XP partition that offers a choice between 7 and XP. This behaviour has been noticed by others. Now my booting is slightly odd. I have GRUB on the MBR which lets me choose between Linux and Windows. When I select Windows I have Grub boot to the XP partition where I get the 2nd choice between 7 and XP. Why doesn't the Windows 7 installer put the Windows 7 bootloader on the Windows 7 partition like all previous MS OSs? This is now going to be a real problem for me, as I now want to wipe the XP partition and install something else there (probably another non-MS OS). How can I move the bootloader for Windows 7 onto the Windows 7 partition, thus making it bootable and allowing me to safely wipe the XP partition?

  Read the article

• How to fix Apache from crashing with PHP+Curl on an SSH request?

  - by Jason Cohen

  My Apache process segfaults whenever I call curl_exec() from PHP with an "https://" URL. If I use http instead of https as the URL transport, it works perfectly, so I know curl and the other curl options are correct. I can use curl from the command-line on that server using the https version of the URL and it works perfectly, so I know the remote server is responding correctly, the cert isn't expired, etc.. My server is: Linux 2.6.32-21-server #32-Ubuntu SMP Fri Apr 16 09:17:34 UTC 2010 x86_64 GNU/Linux My Apache version is: Server version: Apache/2.2.14 (Ubuntu) Server built: Apr 13 2010 20:21:26 My PHP version is: PHP 5.3.2-1ubuntu4.2 with Suhosin-Patch (cli) (built: May 13 2010 20:03:45) Zend Engine v2.3.0, Copyright (c) 1998-2010 Zend Technologies My PHP curl module info is: cURL support => enabled cURL Information => 7.19.7 Age => 3 Features AsynchDNS => No Debug => No GSS-Negotiate => Yes IDN => Yes IPv6 => Yes Largefile => Yes NTLM => Yes SPNEGO => No SSL => Yes SSPI => No krb4 => No libz => Yes CharConv => No Protocols => tftp, ftp, telnet, dict, ldap, ldaps, http, file, https, ftps Host => x86_64-pc-linux-gnu SSL Version => OpenSSL/0.9.8k ZLib Version => 1.2.3.3

  Read the article

• Two timer applets in notification area

  - by 1passenger

  Hi, after installig Ubuntu 10.04 Remix I can see two timer applets in the notification area. When I click on the first one, I can see the current date and the menues "Open Calendar", "Set Time and Date". When I click on the second one, I can see a small calendar of the current month and a small world map with my defined locations. I just want to have only one timer to safe some space in the notification area. How to disable one of the two applets? To click "Remove from Panel" isn't possible in the Remix edition!

  Read the article

• In spite of correct DNS, Exchange sending to wrong destination server for single outbound domain

  - by beporter

  My company uses an SBS 2003 server and makes use of Exchange to host our own email. We also have a linux server hosting domains for some of our clients. In order for us to send to those clients, we had internal DNS set up to shadow the client domains to provide "correct" MX records inside our network. For example, public DNS for a domain abc.com might point to 1.2.3.4, but internally we have MX records set up to route mail for abc.com to 172.16.0.4, which is the linux email server. This setup was entirely functional; this is just back story. We've recently moved one of our client domains from our internal linux server to an external email provider. When we did that, we naturally deleted our internal shadow DNS records so our Exchange server would fetch correct (public) DNS records and route mail out to the new external host. This has NOT had any effect on Exchange though. Even after rebooting the Exchange server and completely flushing the DNS cache (nslookups on the Exchange machine itself correctly resolve to the new external address) Exchange still attempts to deliver messages for the domain to our internal server! Exchange correctly routes to all other internal and external domains when sending email. Somehow Exchange is trying to deliver to a machine that by all accounts it has no business trying to use for just this one domain. Is there a DNS cache that Exchange uses internally? Is there a way to flush that internal cache? What else could I be missing?

  Read the article

• How do I Connect a 30yr-old Tandy 1400LT laptop to the internet?

  - by Clemens Bergmann

  Just for the fun of it, I want to get an old Tandy 1400LT laptop: small monochrome display two floppy drives rs-232c connector "printer" connector connect the thing the internet and use it as an ssh terminal. How would I connect it to the internet? The software should be no problem as it is a 386 hardware. There should be a small linux distribution which can be run on it. But how would I phisically connect the hardware? It has no ethernet port. Has someone experience with Serial/Paralel-to-ethernet converters?

  Read the article

• How to align text at the top left-hand corner?

  - by OverTheRainbow

  I'd like to use stylesheet instead of hard-coding HTML so that text within cells are aligned vertically, ie. text starts at the upper left-hand corner. However, neither of this works: <head> <link rel="STYLESHEET" href="display.css" type="text/css"> <style> td {vertical-align:top; font-size:x-small} td {vertical-align:text-top; font-size:x-small} </style> </head> Does someone know? Thank you. Edit: Problem solved. Turns out the HTML editor I'm using is a bit old and didn't display things as expected, but they do show OK in a modern browser with "vertical-align:top".

  Read the article

• How to download Vim script on the command-line?

  - by HaiYuan Zhang

  Whenever I want to install a new Vim script on the Linux server I'm working on, my typical workflow is as the following: surf the plugin's homepage in Vim online using FireXXXX download a right version of the plugin to my laptop by click some highlighted link upload the downloaded plugin from my laptop to Linux server using WinSCP which is really inconvenient. I don't know what is the magic behind this: I mean for the same hyperlink I click it in web browser. I can let you download it but use Wget plus the hyperlink in Linux command-line will end up with nothing but an error indication. Hyperlink in the web browser. Otherwise I can get the link in web browser and then use Wget or some similar tool to actually do the downloding. I try new cool Vim scripts quite ofte , so you can imagine my dismay when I have to repeat the tedious action all the time. What are some tips which can let me download the Vim scripts in a more "professional" way? Post edit: My problem is not find a tool like Wget or cURL. The problem I met is quite specific; to use these tools to download a Vim script. Let's take http://www.vim.org/scripts/script.php?script_id=30 as an example. It's the normal place where one can get the script, at least for me. But I can't find an working URL from this page that can feed to Wget.

  Read the article

• Mountable online storage (no syncing)

  - by Sam

  I have a Linux VPS that I would like to turn into a media server. Like most cheap VPS's, it has a fairly small storage capacity. What I would like to do is attach the box to an online backup system such as SpiderOak or DropBox, where the files would reside and be directly accessible to either a webserver or media server software. Since the VPS hdd is small, I do not want the files to be synced to it. I would like a storage system that is online only. Ideally mountable like a network drive. Are there any services that suit my needs, or workarounds for services such as SpiderOak that do not require syncing?

  Read the article

• Find files containing a string on the whole filesystem

  - by Fabio

  I need to find all the instances of a given string in the whole filesystem, because I don't remember in which configuration files, script or any other programs I put it and I need to update that string with a new one. I tried with the following command `grep -nr 'needle' / --exclude-dir=.svn | mail [email protected] -s 'References on xxx' If I run this command on a small directory it gives me the output I need in the form /path1/:nn:line containing needle /path2/:nn:line containing needle where /path1 is the full path of the file, nn is the row containing the needle and last field is the content of the line. However when I run the command on the root directory the grep process hang after a while. I run this script about 8 hours ago and even on a small filesystem (less than 5GB) it doesn't end and if I run top or ps the process seems sleeping root 24909 0.0 0.1 3772 1520 pts/1 S+ Feb10 0:15 grep -nr needle / --exclude-dir=.svn Why it doesn't end? Is there any better way to do this (it's a one time job, I don't need to execute this more than once) Thanks.

  Read the article

• (Zywall USG 300) NAT bypassed when accessing in-house-server From LAN Via domain name

  - by mschr

  My situations is like this; i host a number of websites from within our joint network solution. On the network is basically 3 categories: the known public, registered via mac, given static dhcp lease the anonymous lan connections, given lease from specific dhcp range switches, unix hosts firewall Now, consider following hosts which are of interest 111.111.111.111 (Zywall USG 300 WAN) 192.168.1.1 (ZyWall USG 300 LAN) load balances and bw monitors plus handles NAT 192.168.1.2 (Linux www) serves mydomain1.tld and mydomain2.tld 192.168.123.123 (Random LAN client) accesses mydomain1.tld from LAN 23.234.12.253 (Random External client) accesses mydomain1.tld via WAN DNS A records are setup so that both mydomain1.tld and mydomain2.tld points to 111.111.111.111 - and the Linux www serves the http parts with VirtualHost configurations, setting up the document roots pr ServerName, this is not so interesting though.. NAT rule translates 111.111.111.111:80 to 192.168.1.2:80 (1:1 NAT) Our problem follows; When accessing http://mydomain1.tld from outside (23.234.12.253 example host) the joint network - everything is fine, zywall receives requests via port 80 and maps it to the linux host' httpd. However - once trying to go through the NAT from LAN side (in-house, 192.168.123.123 example host) then one gets filtered in the Zywall port 80 firewall. I know this only because port 443 is open for administration interface and https://mydomain1.tld prompts for zywall login. So my conclusion is, that the LAN that accesses 111.111.111.111 in fact are routed to 192.168.1.1 whilst bypassing the NAT table. I need to know how to setup NAT / Policy Route, so that LAN WAN LAN will function with proper network translations instead of doing the 'quick nameserver lookup' or whatever this might be.

  Read the article

• How does Windows 7 DNS client work?

  - by Mark Allison

  I am using a local DHCP and DNS server on my home network on a linux machine. It is running CentOS 6.3 with dnsmasq 2.48. It's all working fine except for local DNS lookups for Windows machines only. I have a mix of Ubuntu, CentOS and Windows machines on the network, some virtual, some physical. I have a machine called boron and the domain is called localdomain If I ping boron from any linux machine, I get [root@lithium lists]# ping -c3 boron PING boron.localdomain (10.0.0.5) 56(84) bytes of data. 64 bytes from boron.localdomain (10.0.0.5): icmp_seq=1 ttl=64 time=0.740 ms 64 bytes from boron.localdomain (10.0.0.5): icmp_seq=2 ttl=64 time=0.478 ms 64 bytes from boron.localdomain (10.0.0.5): icmp_seq=3 ttl=64 time=0.458 ms --- boron.localdomain ping statistics --- 3 packets transmitted, 3 received, 0% packet loss, time 2000ms rtt min/avg/max/mdev = 0.458/0.558/0.740/0.131 ms If I do it from my Windows 7 machine, I get: Ping request could not find host boron. Please check the name and try again. If I try ping boron.localdomain I get: Pinging boron.localdomain [67.215.65.132] with 32 bytes of data: Reply from 67.215.65.132: bytes=32 time=16ms TTL=57 Reply from 67.215.65.132: bytes=32 time=188ms TTL=57 Reply from 67.215.65.132: bytes=32 time=15ms TTL=57 Reply from 67.215.65.132: bytes=32 time=14ms TTL=57 Ping statistics for 67.215.65.132: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 14ms, Maximum = 188ms, Average = 58ms which is clearly wrong. Why is it going out to the internet? Why can't my windows machine resolve the boron hostname to a FQDN? My Windows machines and linux machines get their network config from DHCP. UPDATE If I do ipconfig /all in Windows, it looks as I would expect: Windows IP Configuration Host Name . . . . . . . . . . . . : lanthanum Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : .localdomain Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : .localdomain Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller Physical Address. . . . . . . . . : 50-E5-49-38-FC-A2 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IPv4 Address. . . . . . . . . . . : 10.0.0.57(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : 23 August 2012 13:58:45 Lease Expires . . . . . . . . . . : 24 August 2012 07:58:48 Default Gateway . . . . . . . . . : 10.0.0.6 DHCP Server . . . . . . . . . . . : 10.0.0.6 DNS Servers . . . . . . . . . . . : 10.0.0.6 208.67.222.222 208.67.220.220 NetBIOS over Tcpip. . . . . . . . : Enabled When I do an nslookup I get: Server: carbon.localdomain Address: 10.0.0.6 *** carbon.localdomain can't find boron: Unspecified error However if I do ifconfig -a in Linux I get: [root@nitrogen ~]# ifconfig -a eth0 Link encap:Ethernet HWaddr 00:0C:29:AF:EC:2A inet addr:10.0.0.7 Bcast:10.0.0.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:187687 errors:0 dropped:0 overruns:0 frame:0 TX packets:5857 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:23910700 (22.8 MiB) TX bytes:712964 (696.2 KiB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:329894 errors:0 dropped:0 overruns:0 frame:0 TX packets:329894 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:67153143 (64.0 MiB) TX bytes:67153143 (64.0 MiB) and nslookup: [root@nitrogen ~]# nslookup boron Server: 10.0.0.6 Address: 10.0.0.6#53 Name: boron Address: 10.0.0.5 Both machines are on the same network using the same DHCP server. UPDATE 2 I thought the issue was resolved but I am getting intermittent DNS resolving issues but only on my Windows 7 machine. All my linux boxes are fine. This is what happens when I ping and nslookup from Windows to a Windows 2008 Server: C:\Users\mark>nslookup magnesium Server: carbon.localdomain Address: 10.0.0.6 Name: magnesium.localdomain Address: 10.0.0.12 C:\Users\mark>ping magnesium Pinging magnesium.localdomain [67.215.65.132] with 32 bytes of data: Reply from 67.215.65.132: bytes=32 time=267ms TTL=57 Reply from 67.215.65.132: bytes=32 time=162ms TTL=57 Reply from 67.215.65.132: bytes=32 time=510ms TTL=57 Reply from 67.215.65.132: bytes=32 time=146ms TTL=57 Ping statistics for 67.215.65.132: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 146ms, Maximum = 510ms, Average = 271ms And from Linux: [root@beryllium ~]# ping -c4 magnesium PING magnesium.localdomain (10.0.0.12) 56(84) bytes of data. 64 bytes from magnesium.localdomain (10.0.0.12): icmp_seq=1 ttl=128 time=0.176 ms 64 bytes from magnesium.localdomain (10.0.0.12): icmp_seq=2 ttl=128 time=0.634 ms 64 bytes from magnesium.localdomain (10.0.0.12): icmp_seq=3 ttl=128 time=0.685 ms 64 bytes from magnesium.localdomain (10.0.0.12): icmp_seq=4 ttl=128 time=0.263 ms --- magnesium.localdomain ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 3002ms rtt min/avg/max/mdev = 0.176/0.439/0.685/0.223 ms [root@beryllium ~]# nslookup magnesium Server: 10.0.0.6 Address: 10.0.0.6#53 Name: magnesium.localdomain Address: 10.0.0.12 UPDATE 3 I stopped the Windows DNS client on my Windows 7 machine with net stop dnscache and it is now working fine. It would be nice to get DNS working with the DNS client on, but I might be OK without it, what do you think?

  Read the article

• Backup Client/Server Software that Syncs only the Delta?

  - by Urda

  I have a co-located server, and a desktop computer. I push small things and large ammounts of small files (like my iTunes) into a JungleDisk cloud. If a few files change there, no big deal, the file gets re-uped. For larger files JungleDisk backup isn't helpful. Things like movies and VMware images that change a lot, but I want backed up. Just not to JungleDisk since that would cost me even more money. I am looking for a product, closed or open source (preferably open source) that will sync the change, or delta, to my personal server on a schedule. That way I can keep a copy of my larger things, without paying JungleDisk a ton more since they are in the range of many Gigabytes. Right now these few items are backed up over FTP, and take forever. Both the client and server are windows environments.

  Read the article

< Previous Page | 666 667 668 669 670 671 672 673 674 675 676 677  | Next Page >