Search Results

Search found 29317 results on 1173 pages for 'device control'.

Page 670/1173 | < Previous Page | 666 667 668 669 670 671 672 673 674 675 676 677  | Next Page >

• diagnostic software for wifi adapter

  - by Nathan Fellman

  I'm having trouble with my wifi connection. Is there any software out there that can help me determine if the problem is in the drivers or in the hardware? Regretfully, I'm working on Vista Edit: The problem I'm having is that the Vista reports that the wireless radio is connected, shows an IP and all, the router also shows that the computer is connected, but there's no connectivity. I can't logon to the router, and I can't even ping it. When I ping it I get the response: General Failure I have tried connecting with and without various wireless security protocols. I have tried disabling the wireless adapter and re-enabling it from the Device Manager I have tried updating the driver None of this has helped. When I connect via Ethernet (with a cable, that is), everything works fine. Edit: I'm not using any firewall on the computer, that I'm aware of. The IP address for the WIFI adapter is similar to the one for the LAN adapter. They differ by one.

  Read the article

• Screen is black at login screen if display driver is enabled

  - by Amir Rachum

  I have a Lenovo x200 and recently its screen didn't work, so I took it to a repair lab. The guy told me they replaced the screen inverter. I powered up the laptop and the ThinkPad logo was shown, so I was happy. When I got home the computer would boot up, then instead of the logon screen, I got a black screen. Went to safe mode, disabled the display adapters, reset the computer, and I got a clean boot. Then I tried to reinstall the drivers, and it just led to the same condition. My video card is (from device manager): Mobile Intel(R) 4 Series Express Chipset Family. Now my laptop works as I'm working with display drivers disabled, but without display drivers I can't watch movies, etc. Any solution to this problem? Edit: I plugged in an external monitor and it works on it with display drivers enabled. However, it does not find the laptop monitor.

  Read the article

• Not able to connect to internet in RHEL 5

  - by chankey007

  I just installed red hat enterprise 5 in my laptop and on desktop both. In desktop it is working fine but in laptop it is not showing the eth device. (I tried ifconfig only lo is there). I tried ifup eth0 still nothing happened. The network service in /etc/sysconfig/network-scripts/ifcfg-eth0 and in /etc/sysconfig/network are enable. I had ubuntu in my laptop before and I faced same problem with that too. Is there any problem with my laptop? I have my system on dual boot and in win7 networking is running fine. I am not able to connect to the internet only, other devices are working fine. System conf: Sony vaio E series. 3 GB RAM, intel core i3 2.13 GHZ.

  Read the article

• Not able to connect to internet in RHEL 5

  - by chankey007

  I just installed red hat enterprise 5 in my laptop and on desktop both. In desktop it is working fine but in laptop it is not showing the eth device. (I tried ifconfig only lo is there). I tried ifup eth0 still nothing happened. The network service in /etc/sysconfig/network-scripts/ifcfg-eth0 and in /etc/sysconfig/network are enable. I had ubuntu in my laptop before and I faced same problem with that too. Is there any problem with my laptop? I have my system on dual boot and in win7 networking is running fine. I am not able to connect to the internet only, other devices are working fine. System conf: Sony vaio E series. 3 GB RAM, intel core i3 2.13 GHZ.

  Read the article

• Hide Drive / Avoid Low Diskspace Warning on ReadyBoost Cache?

  - by Simon Richter

  I've just added an SSD as a ReadyBoost cache drive, and have two minor cosmetic issues with it: the drive still shows up in the drive list I get a warning balloon every five minutes that the drive is full and that I should empty the Recycle Bin. The former is ignorable (and I guess I can solve it with a group policy); the latter is somewhat going on my nerves. Are there official buttons "hide ReadyBoost drives" and "do not warn on low diskspace for ReadyBoost drives" somewhere that I may have missed? If not, I guess I can use the group policy to hide the drive; I'd still need a way for the system to not warn about the drive being full. Also, am I right that I need to assign a drive letter and format the drive with NTFS to use it for ReadyBoost, or is there a way to just use the raw device?

  Read the article

• Enable live streaming on website

  - by Somebody

  I have a server colocated in a datacentre (dedicated 1Gbit line, SSDs, etc.) running CentOS 5.4 64-bit. I want to stream live video from a device (webcam, camcorder, whatever.) to my server which inturn can re-broadcast it on demand through a flash player (such as Flowplayer) so that more users will be able to watch the stream since the server is quite fast. Does a solution like this exist already (streaming software from live source to flash media server) or will I need to hire someone to code it? I see that VLC has an option to stream video.. will that be suitable in this case? Or is there a better way to do it? I don't want a browser based solution on my end. It'll be great if this can be done without running an X server but I don't mind either way. This will be running on a dedicated PC at home.

  Read the article

• Server 2008 R2 Datacenter (and all other version) not detecting hardware

  - by Mitchell Skurnik

  I upgraded my ASUS KFN32-D SLI/SAS motherboard to the latest BIOS version and swapped out the 2 dual-core procs with 2 quad core procs. After installing Server 2008 Datacenter onto the system I noticed that it was not connected to the network. I open device manager and see no network adapters. I have to go up to View - Show hidden devices to even see the virtual WAN Miniport adapters. This problem happens in Vista and Windows 7 (all x64). What is even stranger is it all works in x86 mode. What in x64 could be causing windows to not even detect hardware that works in x86? Is the boot manager possibly the culprit?

  Read the article

• centos 100% disk full - How to remove log files, history, etc?

  - by kopeklan

  mysqld won't start because disk space is full: 101221 14:06:50 [ERROR] /usr/libexec/mysqld: Error writing file '/var/run/mysqld/mysqld.pid' (Errcode: 28) 101221 14:06:50 [ERROR] Can't start server: can't create PID file: No space left on device running df -h: Filesystem Size Used Avail Use% Mounted on /dev/sda2 16G 3.2G 12G 23% / /dev/sda5 4.8G 4.6G 0 100% /var /dev/sda3 430G 855M 407G 1% /home /dev/sda1 76M 24M 49M 33% /boot tmpfs 956M 0 956M 0% /dev/shm du -sh * in /var: 12K account 56M cache 24K db 32K empty 8.0K games 1.5G lib 8.0K local 32K lock 221M log 16K lost+found 0 mail 24K named 8.0K nis 8.0K opt 8.0K preserve 8.0K racoon 292K run 70M spool 8.0K tmp 76K webmin 2.6G www 20K yp in /dev/sda5, there is website files in /var/www. because this is first time, I have no idea which files to remove other than moving /var/www to other partition And one more, what is the right way to remove log files, history, etc in /dev/sda5?

  Read the article

• Can I use the voice & SMS features of my GSM SIM through my laptop?

  - by i..

  My laptop (a Lenovo T410s) has an internal GSM modem (device manager calls it a Qualcomm Gobi 2000 HS-USB Modem 9205) that I'm currently using a regular (voice, data, text, etc) 3G SIM in. The data functionality works great through the Lenovo software & Windows 7 but I was wondering if I can use the other features (specifically voice & SMS) through Windows. Is it posisble to use the non-data features of my 3G SIM through my Qualcomm GSM modem? If so, what software is available to this end? If not, where is the restriction? (e.g. hardware, OS, driver, software) Thanks!

  Read the article

• mount fstab partition with public access

  - by Mikhail

  How do I specify that an fstab mount-point should be public? I want /mnt/windows to be accessible to normal users. I believe I am using ntfs-3g. If I set the /mnt/windows to 777 will it be publicly accessible without changing the permissions on the NTFS disk? /dev/sdb4 /mnt/windows ntfs noatime 0 1 /dev/sdb5 / ext4 noatime 0 1 UUID=5AA4-168D /boot/efi vfat defaults 0 1 and localhost my_computer # stat /mnt/windows/ File: '/mnt/windows/' Size: 12288 Blocks: 24 IO Block: 512 directory Device: 814h/2068d Inode: 5 Links: 1 Access: (0700/drwx------) Uid: ( 0/ root) Gid: ( 0/ root) Access: 2014-08-21 18:29:13.597722200 -0500 Modify: 2014-08-21 18:29:13.597722200 -0500 Change: 2014-08-21 18:29:13.597722200 -0500 Birth: -

  Read the article

• Ending a program on Windows Mobile 6 that refuses to die

  - by Brandon

  I have an application that was installed on a handheld device running Windows Mobile 6.0. The application basically connects to a remote server and sends scanned barcodes to it. The application shut down unexpectedly, and now it refuses to go away. I tried starting it up again and nothing happened. I went to the Running Programs, hit Stop All, and it ended everything but the application. It gives an error saying it's not responding, so I try to End Task, and it does nothing. I even uninstalled and reinstalled the application. Is there any way to kill this thing?

  Read the article

• Is WEP used in conjunction with a wireless access list adequate security?

  - by LeopardSkinPillBoxHat

  I use a Netgear wireless router, with various wireless devices connecting to it. One of my wireless devices doesn't support WPA2 security, so I had to downgrade the security on the router to WEP. We all know WEP is broken, so as an added measure I enabled a wireless access list on the router so that only devices with specified MAC addresses which are in my access list are permitted to connect to the router. I know it is possible to spoof a MAC address from a device for the purposes of accessing a secure network like this. But is it easy? Is using WEP and a wireless access list good enough to prevent most hacking attacks? Or should I do whatever I can to ensure all devices support WPA2 in the future?

  Read the article

• How to Set "<options>" in fstab - Manual Mounting is Successfull

  - by nicorellius

  I am not real familiar with fstab yet, so I have a couple questions. When I use this command to mount devices: sudo mount -t cifs -o username=admin //192.168.1.134/share_name /mnt/share_name With passwords: sudo="local user password" password="password for device" How do I translate that into an fstab entry? So far, I have tried this in the fstab and mounting fails: //192.168.1.134/share_name /mnt/share_name cifs default 0 0 This is where the question comes in. Where I have default, should there be something instead, indicating username=admin, etc?

  Read the article

• Strange Intermittent Background Sound in Windows 7

  - by NoCarrier

  Ok, this is very strange. Recently, i noticed that every 10-15 seconds, there would be this faint, annoying duh-dum sound coming out of my speakers. (hard to describe. sounds somewhat like the sound windows makes when you unplug a USB device, but not as pronounced and much quieter). I closed every app and ended as many processes as I could, but the sound persists. I look at the volume mixer and sure enough, when the sound occurs, there is a little spike in the level under "System Sounds". I haven't installed any hardware or software in the last several weeks. This started recently - completely out of the blue. Does anyone have any insight?

  Read the article

• how to stop a driver from running - it self protected and rootkit hidden

  - by Aristos

  I have this serous problem For the first time I can not stop a program from running. Something is on one laptop computer that is run as system legacy driver, and self protected and hidden on service as rootkit. Anything I try to remove fails. When a program or anti toolkit try to remove the hidden registry setting for make it stop I get this error : "a device attached to the system is not functioning" So any idea that can help me stop it from running, or even delete it on start up ? My one limitation is that the hard drive is on a laptop and I can not remove it and attact it to somewhere else. This program not let me, touch the registry, do not let me touch the file, do not let me touch the file, The move on boot fail to delete it, the rootrepeal fail to delete it, the rootkiet reveal from sysinternals fail to reveal it ! everything fails. Do how have any experience on this, or do you have any suggestion how to stop this driver from run ?

  Read the article

• Remote access to BIOS?

  - by j-g-faustus

  I have a home server running headless (i.e. without a monitor), using ssh for remote access. This works fine most of the time, but I still need a graphics card and still need to drag out a monitor whenever I have to access BIOS, (re-)install the OS and similar. I know that there are business servers that let you control everything remotely (over Ethernet), including power up and BIOS access. Is this type of functionality available for "prosumer" class hardware? If so, where does it sit - should I look for motherboard support, a PCI-e card or an external device? And does this type of functionality have a name, so I know what to google for?

  Read the article

• Why is my metro screen getting extended to half of the second screen?

  - by maximusyoda

  When I extend my desktop to the second screen, it stays fine for a few minutes, but after a while, the first metro screen stretches all the way to half of the second screen. The search bar etc stops working. The desktop itself shares fine. But the metro screen is messed up as well as the resolution. The second screen is using the recommended resolution. All I want is to have an extended screen. The problem occurs in my office Windows 8 laptop as well. Not sure what to do with it. Device: Surface Pro 2 External Monitor: Dell 2208WFP 1680 x 1050 Pixel Resoultion 22''

  Read the article

• Misbehaving Network Printers - options?

  - by Dan Kelly

  We are having some issue with printers on our network. We have 3 floors, 2 printers per floor (A3 & A4) all connected to the same Print Server. The issue is that the same printer may not behave the same on two different, seemingly identical desktops. The commonest place this is seen on our bulk print script in AutoCAD - occasionally drawings may print Landscape on Portrait paper, despite drawings always being Landscape... Does any one have any suggestions on what we can check / try? The current line of attack is to setup a new Print Server, with the HP universal print driver rather than the device specific drivers, and replace printers using exactly the same method on all desktops. Sound good?

  Read the article

• How to lie to Win98 about USB drivers?

  - by BCS

  I have a new printer and a old (Windows 98) system (that can't be upgraded). I've been told that some of the drivers for older printers of the same make are very likely to work just fine for it if I can talk windows into using them. Is there a way to edit the map of device IDs (VID/PID?) to USB drivers? The specific kind of tool I'm looking for should work for any kind of USB drivers, not just printers. OTOH if someone knows of a technique that work for some kinds of printers, that could be of (general) interest.

  Read the article

• bridge to share WiFi internet connection over eth0

  - by rubo77

  In this script there is implemented that you create a mesh network and connect other machines to your device to serve an internet connection with dhcp: echo "starting bridge to share internet connection over eth0" ifconfig eth0 up promisc brctl addbr br-freifunk brctl addif br-freifunk bat0 brctl addif br-freifunk eth0 echo "internet starting, this may take some minutes due to latency..." echo "(use" echo "tail -f /var/log/syslog" echo "in another window for debugging)" echo echo dhclient br-freifunk echo "The error 'Rather than invoking init scripts through /etc/init.d...' can be ignored:" dhclient br-freifunk # without bridge: dhclient bat0 This works fine with the freifunk-mesh network. But how can I serve internet in a normal case? I would like to connect to any open Wifi I find with my network-manager or wicd (yes, with the graphical GUI) and then start a small script that creates a bridge to my network-out on my laptop I use Ubuntu and my networkcards are eth0 and wlan0

  Read the article

• How should I capture Linux kernel panic stack traces?

  - by Alnitak

  What's current best practice to capture full kernel stack traces on a Linux system (RHEL 5.x, kernel 2.6.18) that occasionally panics in a device driver? I'm used to the "old" SunOS way of doing things - crash dumps get written to swap, and on reboot the dump gets retrieved in the local file system. man 8 crash refers to diskdump, but that appears to be unsupported. and/or deprecated. I've played with kdump, but it's unclear whether I can get a stack trace from that. Triggering a panic via Magic SysRq didn't create one. It also seems wasteful to reserve so much memory (128MB) just for a kexec crash recovery kernel.

  Read the article

• Suggestions on providing HA access to an external (fibre) RAID subsystem

  - by user145198

  We are looking at upgrading our storage capacity with an external RAID subsystem that has redundant (2) fibre controllers, each controller has 4 x 8 Gbps fibre ports. I would like to make access to this storage system occur via HA Linux. Ideally I would connect 2 fibre ports from each controller into each Linux server, and then export either NFS or iSCSI via a 10 Gbe interface. I have seen plenty of references to DRBD, however all of those references tend to use block storage that is solely attached to each machine, rather than having a shared block storage device, so I am unsure if DRBD could (or should) be used in this case. Ideas?

  Read the article

• Problems with webcam

  - by Murtaza

  My friend is using Windows 8.1, and he has a webcam. He says it is working very well even without installing drivers. Webcam is A4tech - PK-331F. I asked for this webcam for use. I plugged in the webcam, and Windows detected it and installed drivers automatically. Then I opened Skype to check the webcam. I got a message from Skype that said, "Your webcam has microphone." When I clicked over it, it directed me to sound settings where it showed that the webcam microphone was working. I went to video settings, but the webcam wasn't listed there. As you can see in the image, the webcam is not listed. It is listed in Device Manager but isn't listed in Skype. I am using Windows 7 Professional. Any idea why this is happening?

  Read the article

• How to record desktop session with sound on Moblin?

  - by Moblin Newbie

  I have tried to record my desktop session with sound on a netbook running Moblin, but I can't seem to be able to record sound. xvidcap just says error accessing /dev/dsp. Are there some options I should pass to xvidcap? Should I use some other recording application? Update: I am using the latest xvidcap (1.1.7) and have read the FAQ. Unfortunately Moblin' gnome-volume-control looks nothing like what is linked to from the xvidcap FAQ; there is no way to to set or even look at the details the screenshot shows, as far as I know. alsamixer shows pulseaudio is used, if that gives anyone any clues. The device is Acer Aspire One.

  Read the article

• MacBook repeatedly disconnects from Wi-Fi

  - by redwall_hp

  I have an early 2008-model MacBook (2.4 GHz). The Wi-Fi router I have at home is a Linksys WRT54GX2 that I have had for a few years. My MacBook has recently started disconnecting from the router every few minutes, which is rather annoying. I can reconnect again without having to restart the router or anything, as it seems that the MacBook is just dropping the connection. I have tried changing the channel on the router, and upgrading the laptop from Leopard to Snow Leopard made no difference either. I'm only about six feet from the Linksys device, so distance isn't an issue. This only happens with the Linksys router, while I can use the local library's open network without any issues. The problem also seemingly becomes more pronounced after midnight. What could the problem be? Edit: Here are the logs that Spiff requested: http://pastie.org/951761

  Read the article

< Previous Page | 666 667 668 669 670 671 672 673 674 675 676 677  | Next Page >