Search Results

Search found 54969 results on 2199 pages for '500 error'.

Page 671/2199 | < Previous Page | 667 668 669 670 671 672 673 674 675 676 677 678  | Next Page >

• Won't boot after installing Ubuntu 12.04 sucessfully

  - by Matt

  I installed 12.04 successfully and rebooted (I took out my installation CD), and selected the newly installed Linux partition to boot from rEFIt. Then it just comes up with this error message: Error loading operating system which could not be more vague. Take that back. I guess it could say just "error." I don't even get to the boot prompt which limits what I can do. I cannot boot into rescue mode. I tried boot-repair, but it took more than 24 hours to check the system configuration, so I gave up on that. I'm running a Mac Mini with its main OS being Mac OS X 10.5.8. I have an alternate OS Windows XP installed, which was virtually destroyed by this Linux installation. I sacrificed my working, speedy Windows partition for something that won't even boot up. What was I thinking. My Mac partition is slow as crap. I've tried installing 12.04 many times with two different disks. The first time, I had one partition for Linux, then I had 2 (swap+main), then 3 (swap, main and BIOS), then 4 which is what I have now (swap, main, BIOS, and boot/grub). The only way I could get through the install without GRUB giving up was if I created a separate partition for it. Which was pointless, because it did install successfully, but it still doesn't boot up at all. Could rEFIt be booting off of the BIOS or one of the other partitions? Because if that's the case, there is no alternative, because Mac itself without rEFIt refuses to recognize a Linux ext4 (or 2 or 3) format partition. Apple always has to make everything so difficult. If I'm not mistaken, rEFIt is the only application of its kind for Mac. I can boot off of the CD back to the install/try screen. This is extremely upsetting, can you guys help? Please?

  Read the article

• How to install an init.d script in ubuntu?

  - by suhail

  i am trying to install an init.d script, to run celery for scheduling tasks. Here is the steps i followed: copied the file celeryd and pasted it in folder /etc/init.d/ created a configuration file celeryd in folder /etc/default/ now when i tried to start it by sudo /etc/init.d/celeryd start, it throws error sudo: /etc/init.d/celeryd: command not found I googled about how to install init.d, i got this SO-question. it says to issue a uname -a and when i does i get this: Linux capsonesystem8-desktop 3.2.0-43-generic-pae #68-Ubuntu SMP Wed May 15 03:55:10 UTC 2013 i686 i686 i386 GNU/Linux and also it says use utils like insserv to enable init.d script so tried: insserv /etc/init.d/celeryd but it throws error insserv: command not found so i tried to install insserv sudo apt-get install insserv. but it say aleady installed: insserv is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 222 not upgraded. So how to install init.d script?? Any help will be appreciated. update1: when i tried: $ sh -x /etc/init.d/celeryd start it reveal some errors. may be that is why the service won’t start. update2: I cleared all the errors when i run $ sh -x /etc/init.d/celeryd start but still sudo /etc/init.d/celeryd start throws command not found error

  Read the article

• cannot get upstart to run user job

  - by dre

  I am trying to get upstart start a user job during the boot of my machine. I have my conky.conf upstart config file in my $HOME/.init directory. Wenn I run "start conky" I get this error: dre@dre-laptop:~$ start conky start: Rejected send message, 1 matched rules; type="method_call", sender=":1.76" (uid=1000 pid=2843 comm="start conky ") interface="com.ubuntu.Upstart0_6.Job" member="Start" error name="(unset)" requested_reply="0" destination="com.ubuntu.Upstart" (uid=0 pid=1 comm="/sbin/init") dre@dre-laptop:~$ I (think I) know that this error has to do with the d-bus system (authentification). I also read (http://upstart.ubuntu.com/cookbook/#id96) that ubuntu 12.10 already has the right configuration in the d-bus config file "/etc/dbus-1/system.d/Upstart.conf" to allow normal users to use upstart. dre@dre-laptop:~/.init$ cat conky.conf description "conky, a system monitor appled" start on lightdm stop on shutdown # Automatically restart process if crashed respawn # Essentially lets upstart know the process will detach itself to the background #expect fork # Start conky exec /usr/bin/conky So, who knows, what do I do wrong??? greetings Andre No one??? Please... give me your best shot.

  Read the article

• Packard Bell EasyNote MZ35 freezes when AC unplugged and wireless on

  - by Sense Hofstede

  I would like to ask for some help debugging an irritating problem I'm having with my Packard Bell EasyNote MZ35 and Ubuntu 10.10. Always when the laptop is connected to a wireless network and the AC power lead is unplugged—so it's running on battery power—the system freezes. The screen turns black and shows the error GLib-WARNING **: getpwuid_r(): failed due to unknown user id (0), although this error is completely unrelated to the actual problem. Previous searches on the internet indicate that this error is unrelated to the bug I'm experiencing. It is suggested that Ubuntu tries to hibernate or suspend and that you're seeing the black screen running 'behind' the X server. That would explain the fact that curiously you still see—but cannot move—the mouse cursor. I've already set all the values of the GConf keys in /apps/gnome-power-manager/actions/ to 'nothing', disabled all power management actions I could find, but it didn't solve the problem. It is important to note that the freeze doesn't happen immediately after you unplug the AC power lead. The icon in the notification area may have changed already, but the freeze only occurs when the Notify OSD bubble appears that tells you how many time is left with your battery. Does anyone here have a clue about this problem? A workaround or the cause? If anyone could help me with disabling possible suspend/hibernate behaviour that might be related to this issue, that would be appreciated too. This issue has been reported as bug #666852.

  Read the article

• Wammu - USB Device Name?

  - by Paul

  I'm trying to get to my phone's filesystem through USB in Wammu, but I'm stuck in the configuration wizard when it asks for a USB device name. After about an hour of Internet searching, here are the failed solutions I've already tried, starting with the relevant information returned by lsusb in terminal. lsusb Bus 001 Device 003: ID 12d1:101e Huawei Technologies Co., Ltd. So I tried opening Wammu through sudo wammu in terminal and inputting "/dev/bus/usb/001/003" as the device name, which returns: Error opening device Device /dev/bus/usb/001/003 does not exist! and then "/dev/bus/usb/001/", which returns: Failed to connect to phone Description: Error opening device. Unknown, busy, or no permissions.<br> Function: Init<br> Error code: 2 Another proposed solution was to try "tail -f /var/log/messages" in terminal. But that only returned a "No such file or directory" message. Seemingly relevant dmesg info: [ 4739.716214] usb 1-1: new high-speed USB device number 8 using ehci_hcd [ 4739.854137] scsi9 : usb-storage 1-1:1.0 [ 4740.854416] scsi 9:0:0:0: CD-ROM HUAWEI T Mass Storage 2.31 PQ: 0 ANSI: 2 [ 4740.867051] sr0: scsi-1 drive [ 4740.867806] sr 9:0:0:0: Attached scsi CD-ROM sr0 [ 4740.870464] sr 9:0:0:0: Attached scsi generic sg1 type 5 I don't know why it is coming up as CD-ROM. But there it is. If you haven't noticed already, I'm an absolute beginner when it comes to Linux and terminal. So speaking to me like I'm a three year old is welcome if you can propose a solution. I'm running Ubuntu 12.04 LTS, and the phone is a Huawei U1250. My computer is an Acer Aspire One D250/KAV60. Any help is much appreciated.

  Read the article

• Workaround: build FBX in XNA raise OutOfMemoryException

  - by Vitus

  If you try to add large FBX 3D model to the XNA project, and build it, you can get an OutOfMemoryException build error like following: Error    1    Building content threw OutOfMemoryException: Exception of type 'System.OutOfMemoryException' was thrown.    at System.Collections.Generic.List`1.set_Capacity(Int32 value)    at System.Collections.Generic.List`1.EnsureCapacity(Int32 min)    at System.Collections.Generic.List`1.InsertRange(Int32 index, IEnumerable`1 collection)    at Microsoft.Xna.Framework.Content.Pipeline.Graphics.VertexChannel`1.InsertRange(Int32 index, Int32 count)    at Microsoft.Xna.Framework.Content.Pipeline.Graphics.VertexContent.InsertRange(Int32 index, IEnumerable`1 positionIndexCollection)    at Microsoft.Xna.Framework.Content.Pipeline.Graphics.MeshBuilder.AddTriangleVertex(Int32 indexIntoVertexCollection)    at Microsoft.Xna.Framework.Content.Pipeline.MeshConverter.FillNodeWithInfoFromMesh(KFbxNode* fbxNode, String name, KFbxGeometryConverter* geometryConverter)    at Microsoft.Xna.Framework.Content.Pipeline.FbxImporter.ProcessInformationInNode(KFbxNode* fbxNode, String name, Boolean* partOfMainSkeleton, Boolean* warnIfBoneButNotChild)    at Microsoft.Xna.Framework.Content.Pipeline.FbxImporter.ProcessNode(ValueType parentAbsoluteTransform, NodeContent potentialParent, KFbxNode* fbxNode, Boolean partOfMainSkeleton, Boolean warnIfBoneButNotChild)    at Microsoft.Xna.Framework.Content.Pipeline.FbxImporter.ProcessNode(ValueType parentAbsoluteTransform, NodeContent potentialParent, KFbxNode* fbxNode, Boolean partOfMainSkeleton, Boolean warnIfBoneButNotChild)    at Microsoft.Xna.Framework.Content.Pipeline.FbxImporter.Import(String filename, ContentImporterContext context)    at Microsoft.Xna.Framework.Content.Pipeline.ContentImporter`1.Microsoft.Xna.Framework.Content.Pipeline.IContentImporter.Import(String filename, ContentImporterContext context)    //additional calls here …   My desktop PC have 8Gb RAM, and Visual Studio’s process devenv.exe use under 2Gb of it while build process (about 3.5-4Gb of RAM is always free). It’s obvious, that VS can’t address more than 2Gb of RAM, and when that limit is over, build process is fail. OS on my PC is Win x64,  so I “charge” devenv.exe by using editbin.exe utility – in the VS Command prompt I run following: editbin "C:\Program Files (x86)\Microsoft Visual Studio 10.0\Common7\IDE\devenv.exe" /LARGEADDRESSAWARE This command edits the image to indicate that the application can handle addresses larger than 2 gigabytes. After that FBX file successfully built! Of course, you must put proper path to devenv.exe, depend on your installation path. If you are on Win x86, you need to do additional action – more info here.   P.S.: although now you can build a bigger files, than usual, keep in mind, that XNA have some restrictions on vertex buffer size etc., depend on your current XNA project profile (Reach or HiDef). And if your model’s vertexbuffer size more than 64Mb (with Reach profile), that model can’t be built and raise an error.

  Read the article

• Nautilus crashes after Ubuntu Tweak Package Cleaner

  - by Ka7anax

  Few days ago I started having some problems with nautilus. Basically when I'm trying to get into a folder it crashes. It's not happening all the time, but in 85% it does... Sometimes, after the crash all my desktop icons are also gone. The only thing that I think causes this is Ubuntu Tweak - I'm not sure, but the issues started after I did the Package cleaner from Ubuntu Tweaks... Any ideas? -------- EDIT ---------- First time, after running the command (nautilus --quit; nautilus --no-desktop) 3 times all the system crashed (except the mouse, I could move the mouse). After restart I run it and obtain this: ----- Initializing nautilus-gdu extension Initializing nautilus-dropbox 0.6.7 (nautilus:2966): GConf-CRITICAL **: gconf_value_free: assertion value != NULL' failed (nautilus:2966): GConf-CRITICAL **: gconf_value_free: assertionvalue != NULL' failed Nautilus-Share-Message: Called "net usershare info" but it failed: 'net usershare' returned error 255: net usershare: cannot open usershare directory /var/lib/samba/usershares. Error No such file or directory Please ask your system administrator to enable user sharing. and then this: cristi@cris-laptop:~$ nautilus --quit; nautilus --no-desktop (nautilus:3810): Unique-DBus-WARNING **: Error while sending message: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.

  Read the article

• How to mount an external HDD?

  - by Slash

  I have Ubuntu Linux 12.04 version the latest right now.I want to mount an external HDD NTFS 1TB.I have followed many guides but still no success.The error I'm getting is this: Failed to read last sector (1953523119): Invalid argument HINTS: Either the volume is a RAID/LDM but it wasn't setup yet, or it was not setup correctly (e.g. by not using mdadm --build ...), or a wrong device is tried to be mounted, or the partition table is corrupt (partition is smaller than NTFS), or the NTFS boot sector is corrupt (NTFS size is not valid). Failed to mount '/dev/sdb1': Invalid argument The device '/dev/sdb1' doesn't seem to have a valid NTFS. Maybe the wrong device is used? Or the whole disk instead of a partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around? Using Storage Device MAnager i get this error:Error mounting: mount exited with exit code 1: helper failed with: mount: only root can mount /dev/sdb1 on /media/Skliros_Diskos {external disk name} When I use sudo fdisk -l, this is the output: Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000e0bc6 Device Boot Start End Blocks Id System /dev/sda1 * 2048 618854399 309426176 83 Linux /dev/sda2 618856446 625141759 3142657 5 Extended /dev/sda5 618856448 625141759 3142656 82 Linux swap / Solaris Disk /dev/sdb: 1000.2 GB, 1000202043392 bytes 255 heads, 63 sectors/track, 121600 cylinders, total 1953519616 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0002093a Device Boot Start End Blocks Id System /dev/sdb1 2048 1953525167 976761560 7 HPFS/NTFS/exFAT

  Read the article

• Unable to mount smb share. "Please select another viewer and try again". Please help. Serious smb/nautilus foo needed

  - by oznah

  This don't think this is the typical, "I can't mount a windows share" post. I am using stock Ubuntu 12.04. I am pretty sure this is a Nautilus issue, but I have reached a dead end. I have one share that I can't mount using smb://server/share via nautilus. I get the following error. Error: Failed to mount Windows share Please select another viewer and try again I can mount this share from other machines(non-ubuntu) using the same credentials so I know I have perms on the destination share. I can mount other shares on other servers from my Ubuntu box so I am pretty sure I have all the smb packages I need on my Ubuntu box. To make thing more interesting, if I use smbclient from the command line, I mount this share with no problems from my Ubuntu box. So here's what we know: destination share perms are ok (no problem accessing from other machines) smb is setup correctly on Ubuntu box (access other windows shares no problem) I only get the error when using nautilus smbclient in terminal works, no problem Any help would be greatly appreciated. Googling turned up simple mount/perms issues, and I don't think that is what is going on here. Let me know if you need more information. Hugh

  Read the article

• unable to upgrade to 12.10 beta 2 from 12.04 [closed]

  - by user85959

  Possible Duplicate: There's an issue with an Alpha/Beta Release of Ubuntu, what should I do? authenticate 'quantal.tar.gz' against 'quantal.tar.gz.gpg' exception from gpg: GnuPG exited non-zero, with code 2 Debug information: gpg: Signature made Fri 28 Sep 2012 03:55:55 AM IST using DSA key ID 437D05B5 gpg: /tmp/update-manager-bpIptI/trustdb.gpg: trustdb created gpg: Good signature from "Ubuntu Archive Automatic Signing Key " gpg: WARNING: This key is not certified with a trusted signature! gpg: There is no indication that the signature belongs to the owner. Primary key fingerprint: 6302 39CC 130E 1A7F D81A 27B1 4097 6EAF 437D 05B5 gpg: Signature made Fri 28 Sep 2012 03:55:55 AM IST using RSA key ID C0B21F32 gpg: Can't check signature: public key not found Traceback (most recent call last): File "/usr/lib/python2.7/dist-packages/UpdateManager/UpdateManager.py", line 1110, in on_button_dist_upgrade_clicked fetcher.run() File "/usr/lib/python2.7/dist-packages/UpdateManager/Core/DistUpgradeFetcherCore.py", line 253, in run _("Authenticating the upgrade failed. There may be a problem " File "/usr/lib/python2.7/dist-packages/UpdateManager/DistUpgradeFetcher.py", line 41, in error return error(self.window_main, summary, message) File "/usr/lib/python2.7/dist-packages/UpdateManager/Core/utils.py", line 384, in error d.window.set_functions(Gdk.FUNC_MOVE) RuntimeError: unable to get the value gpg: /tmp/tmplqoLDu/trustdb.gpg: trustdb created

  Read the article

• reinstalling phpmyadmin

  - by explorex

  EDIT:: installed mysql-server but no phpmyadmin (since phpmyadmin was installed before mysql, that resulted an error). How to reinstall phpmyadmin with database (there is no phpmyadmin datbase)? unstalling it and reinstalling it didn't help. i was trying to install phpmyadmin (and zend framework) through synaptic manager but in the middle i was prompted for password i thought it was phpmyadmin password and i proceeded but i got error and i aborted. and then again i tried to reinstall, it reinstalled but i am not getting phpmyadmin. EDIT::The following is invalid so please don't bother apache is running but mysql is not some of it's characteristics are: santosh@explorer:~$ mysql ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2) santosh@explorer:~$ sudo apt-get install mysql-server E: Could not get lock /var/lib/dpkg/lock - open (11: Resource temporarily unavailable) E: Unable to lock the administration directory (/var/lib/dpkg/), is another process using it? Should i be asking this question here or stackoverflow? UPDATES:: after restarting my computer santosh@explorer:~$ sudo service mysql start [sudo] password for santosh: mysql: unrecognized service UPDATES:: santosh@explorer:~$ sudo apt-get install mysql Reading package lists... Done Building dependency tree Reading state information... Done E: Unable to locate package mysql

  Read the article

• Forwarding a subdomain to main domain using Godaddy

  - by Ryan Hayes

  I have current blog, which was hosted on Tumblr at http://blog.ryanhayes.net. I'm moving it over to http://ryanhayes.net, and have all the 301 redirects set up for the blog entries to map to my new blog, which is hosted using Godaddy (domain included). When I try to set up a subdomain forward, I'm greeted with a nice 403 Forbidden response (as of this writing, you can see it at http://blog.ryanhayes.net. When I try to ping both the subdomain and domain, they point to the same IP address, so I know blog subdomain has at least switched over to point to the same content. I don't really understand why I would get a 403 Forbidden on the same content that I can see perfectly fine via another domain. Currently, I have a CNAME of blog pointing to @, which is how "www" is set up to forward, so I'm assuming it would do the same thing. My question is what is the proper way to set up my DNS to make the blog subdomain forward to my main domain (301) using the GoDaddy DNS manager? Bonus: What is the background on why I am getting a 403 error the current way? Forbidden You don't have permission to access / on this server. Additionally, a 403 Forbidden error was encountered while trying to use an ErrorDocument to handle the request. UPDATE 12/7/2010 Error on site has been fixed, you can no longer view it from my site.

  Read the article

• Reboot failure after upgrade from 8.04 LTS to 10.04 LTS

  - by Alan Fietz

  I bought our computer from Freegeeks with Ubuntu 8.04 installed. I upgraded from Ubuntu 8.04 to 10.04 on Thursday November 10. I have an ASUS P4P800SE with dual Intel P4@3GHZ. Installation messages were: - Error loading Nautilus config info - Replaced customied /etc/login.defs - Replaced customized /etc/dhcp3/dhclient.conf - 189 packages removed - WARNING: Failed to read mirror file When I rebooted, the usual ASUS screen appeared, then "Loading GRUB" then "starting Up..." then "starting Up..." again then a blank screen (the moniter went dormant). I rebooted, started GRUB and selected: version 10.04.3 LTS kernel 2.6.32-35 generic I got the same results. I rebooted, started GRUB and selected: kernel 2.6.24-29 generic Here's what was displayed: udevd [875]: error getting socket: Invalid argument libudev:udev_monitor_new_from_netlink: error getting socket: Invalid argument Segmentation fault **Gave up waiting for root device** Common problems - Boot args (cat/proc/cmdline) - Check root delay - check root - Missing modules (cat/pro/modules; **Alert! /dev/disk/by_vvid/c59c6361 etc... does not exist. Dropping to a shell.** Then Busybox v1.13.3 started with the following prompt (?) (initramfs) _ But my typing did not appear on the screen. It appears the hard drive cannot be found. Any suggestion on how to remedy this? Thank you.

  Read the article

• Backup Failed, need help not failing

  - by Costa

  Backup (Deja Dup) failed to do an initial backup to my Amazon S3, and despite my best Googling efforts, I could not find a solution : ( Here's the error message: BackendException: Error uploading s3+http://deja-dup-auto-akiaiksyiqi3buaaz26a/My-Archive/duplicity-full.20130805T143807Z.vol1.difftar.gpg I'm running Ubuntu 12.04 LTS on a System76. The folder I'm trying to backup to in S3 is set to store as Amazon Glacier Storage. Any help would rock! Update: better debugging info: DUPLICITY: . Failed to create bucket (attempt #1) 'deja-dup-auto-axxxxxxxxxxxa' failed (reason: S3ResponseError: S3ResponseError: 403 Forbidden DUPLICITY: . <?xml version="1.0" encoding="UTF-8"?> DUPLICITY: . <Error><Code>SignatureDoesNotMatch</Code><Message>The request signature we calculated does not match the signature you provided. Check your key and signing method.</Message><StringToSignBytes>47 00 54 0a 0a 0a 4d 6f 6e 00 20 30 35 20 00 75 67 20 32 30 31 00 00 35 00 32 34 3a 31 32 20 47 4d 00 0a 2f 64 65 6a 61 2d 64 75 70 2d 61 75 74 6f 2d 61 6b 69 00 6b 73 79 69 71 69 33 62 75 61 00 7a 32 36 61 2f</StringToSignBytes><RequestId>8000000000003</RequestId><HostId>Uxxxxxxxxxxxxxxxxx/xxxxxxxxxxxxxxxxRF</HostId><SignatureProvided>yxxxxxxxxxxxxxxxxxxxxx</SignatureProvided><StringToSign>GET

  Read the article

• Virtualbox shared folder mount from fstab fails; works once bootup is complete

  - by Ben

  I've got Ubuntu 13.10 installed in Virtualbox 4.3. The host machine is Windows. I have a couple of Virtualbox shared folders being mounted by /etc/fstab. Until recently this setup worked just fine, but after upgrading from Ubuntu 13.04 and Virtualbox 4.2 (at essentially the same time) the fstab mounting stopped working. I get the following error during boot: An error occurred while mounting /home/benme/Documents. keys:Press S to skip mounting or M for manual recovery Pressing M for manual recovery and then trying to mount manually also fails: root@benme-vb:~# cd /home/benme root@benme-vb:/home/benme# mount Documents /sbin/mount.vboxsf: mounting failed with the error: No such device But if I instead skip mounting during boot, wait for Unity to start and then mount manually in a shell, everything works fine: benme-vb ~ % ls Documents benme-vb ~ % sudo mount Documents [sudo] password for benme: benme-vb ~ % ls Documents # actual file list omitted Note that when I mount manually I'm letting mount take all the options from /etc/fstab, and it works. This suggests to me that it's some sort of timing issue, where Virtualbox isn't "ready" to provide the shared file mounts at the point /etc/fstab mounts are run during bootup. Here's the fstab line, just for completeness: Documents /home/benme/Documents vboxsf uid=benme,gid=benme,dmode=774,fmode=664 0 0 Is there something I can do about this from the Ubuntu side? Or does anyone happen to know more about this from the Virtualbox angle? I've found an old report on the Virtualbox bug-tracker with identical symptoms, but in that case the user had updated Virtualbox without updating their guest additions and resolving that fixed the problem; this isn't happening here, I've definitely got the 4.3 guest additions installed.

  Read the article

• Problems compiling with Quickly

  - by espectalll123

  Welcome to another of my questions about compiling! :P So, after days of stress trying to compile my app, first manually, after porting the project to Quickly, I decided to create the project from scratch using this time Quickly. Now I've finished the app, it works great using quickly run and I haven't added any new file, just removed, replaced or modified. But it can't be compiled using quickly package --verbose --extras... why, if there doesn't seems to be errors related with my project? The fail happens because python-mkdebian doesn't haves enough parameters to work. The terminal output (in Spanish): running install_egg_info Writing /tmp/tmpsT6Pms/virtuam-0.1.egg-info WARNING: the following files are not recognized by DistUtilsExtra.auto: help/C/figures/icon.png help/C/index.page help/C/preferences.page help/C/topic1.page virtuam.desktop.in Traceback (most recent call last): File "/usr/bin/python-mkdebian", line 368, in <module> egg = get_egg_info() File "/usr/bin/python-mkdebian", line 35, in get_egg_info k, v = l.strip().split(': ', 1) ValueError: need more than 1 value to unpack Ha ocurrido un error al crear el paquete Debian ERROR: no se puede crear o actualizar paquete ubuntu Error: la orden package ha fallado Cancelando

  Read the article

• if/else statements or exceptions

  - by Thaven

  I don't know, that this question fit better on this board, or stackoverflow, but because my question is connected rather to practices, that some specified problem. So, consider an object that does something. And this something can (but should not!) can go wrong. So, this situation can be resolved in two way: first, with exceptions: DoSomethingClass exampleObject = new DoSomethingClass(); try { exampleObject.DoSomething(); } catch (ThisCanGoWrongException ex) { [...] } And second, with if statement: DoSomethingClass exampleObject = new DoSomethingClass(); if(!exampleObject.DoSomething()) { [...] } Second case in more sophisticated way: DoSomethingClass exampleObject = new DoSomethingClass(); ErrorHandler error = exampleObject.DoSomething(); if (error.HasError) { if(error.ErrorType == ErrorType.DivideByPotato) { [...] } } which way is better? In one hand, I heard that exception should be used only for real unexpected situations, and if programist know, that something may happen, he should used if/else. In second hand, Robert C. Martin in his book Clean Code Wrote, that exception are far more object oriented, and more simple to keep clean.

  Read the article

• Login Fail - Google Music Manager

  - by TX-NY-CA

  This is on a Surface Pro. I have not installed a virtual machine. Here is Google's feedback on the error message I receive when attempting login: "Login failed. Could not identify your computer" error message If you're receiving a 'Login failed. Could not identify your computer.' error, we couldn’t identify your machine. Please note that at this time, virtual machines aren't supported by Google Play. If you're certain that you don't have a virtual machine, some users have reported that they were able to workaround the issue by disabling their network bridge." My ifconfig feedback, in case that's helpful: lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:80 errors:0 dropped:0 overruns:0 frame:0 TX packets:80 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:6640 (6.6 KB) TX bytes:6640 (6.6 KB) mlan0 Link encap:Ethernet HWaddr 60:45:bd:f9:04:c0 inet addr:10.129.116.166 Bcast:10.129.116.255 Mask:255.255.255.128 inet6 addr: fe80::6245:bdff:fef9:4c0/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:96714 errors:0 dropped:0 overruns:0 frame:0 TX packets:73079 errors:13 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:117500998 (117.5 MB) TX bytes:9008106 (9.0 MB)

  Read the article

• Why does 'top' say my machine is only 50% idle?

  - by Chris Moore

  What's going on here? I'm running nothing on the system, iotop and iftop show the network and hard drive are both idle, and top (sorted by %CPU) shows nothing running. So why is the system only 50% idle? What's the other 50% waiting for? How can I find out? top - 12:01:05 up 3 days, 15:03, 1 user, load average: 6.00, 6.01, 6.05 Tasks: 179 total, 1 running, 178 sleeping, 0 stopped, 0 zombie Cpu(s): 0.7%us, 0.0%sy, 0.0%ni, 49.7%id, 49.7%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 2053996k total, 1992600k used, 61396k free, 81680k buffers Swap: 4092924k total, 10740k used, 4082184k free, 1338636k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 1042 deb 20 0 21468 1412 1000 R 1 0.1 0:00.03 top 1 root 20 0 24188 1952 1152 S 0 0.1 0:01.44 init 2 root 20 0 0 0 0 S 0 0.0 0:00.05 kthreadd Update: dmesg shows the printer driver misbehaving: [28858.561847] cnijnetprn[1503]: segfault at 29 ip 00007f56cf3480f7 sp 00007fffb964ec30 error 4 in libcnnet.so.1.2.0[7f56cf345000+9000] [68851.187802] cnijnetprn[9180]: segfault at 29 ip 00007ffe7636a0f7 sp 00007fff9a8b1990 error 4 in libcnnet.so.1.2.0[7ffe76367000+9000] [155412.107826] cnijnetprn[19966]: segfault at 29 ip 00007fc31de770f7 sp 00007fffc03aa8e0 error 4 in libcnnet.so.1.2.0[7fc31de74000+9000] and also some issue with cp: [248041.172067] INFO: task cp:27488 blocked for more than 120 seconds. [248041.172071] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [248041.172075] cp D ffffffff81805120 0 27488 27345 0x00000004 [248041.172080] ffff880078d57a38 0000000000000046 ffff880078d579d8 ffffffff81032a79 [248041.172085] ffff880078d57fd8 ffff880078d57fd8 ffff880078d57fd8 0000000000012a40 [248041.172090] ffff88007b818000 ffff880069acc560 ffff880078d57a18 ffff88007f8532c0 [248041.172095] Call Trace: [248041.172104] [<ffffffff81032a79>] ? default_spin_lock_flags+0x9/0x10 [248041.172109] [<ffffffff8110a360>] ? __lock_page+0x70/0x70 [248041.172114] [<ffffffff815f0ecf>] schedule+0x3f/0x60 I did try copying something to the USB stick that's plugged into the router and mounted onto this computer using mount.cifs. That almost always causes everything to lock up, so I'm guessing that's the problem. I'll reboot and stop using mount.cifs.

  Read the article

• Is your TRY worth catching?

  - by Maria Zakourdaev

    A very useful error handling TRY/CATCH construct is widely used to catch all execution errors  that do not close the database connection. The biggest downside is that in the case of multiple errors the TRY/CATCH mechanism will only catch the last error. An example of this can be seen during a standard restore operation. In this example I attempt to perform a restore from a file that no longer exists. Two errors are being fired: 3201 and 3013: Assuming that we are using the TRY and CATCH construct, the ERROR_MESSAGE() function will catch the last message only: To workaround this problem you can prepare a temporary table that will receive the statement output. Execute the statement inside the xp_cmdshell stored procedure, connect back to the SQL Server using the command line utility sqlcmd and redirect it's output into the previously created temp table.  After receiving the output, you will need to parse it to understand whether the statement has finished successfully or failed. It’s quite easy to accomplish as long as you know which statement was executed. In the case of generic executions you can query the output table and search for words like“Msg%Level%State%” that are usually a part of the error message.Furthermore, you don’t need TRY/CATCH in the above workaround, since the xp_cmdshell procedure always finishes successfully and you can decide whether to fire the RAISERROR statement or not. Yours, Maria

  Read the article

• Chrome "refusing to execute script"

  - by TestSubject528491

  In the head of my HTML page, I have: <script src="https://raw.github.com/cloudhead/less.js/master/dist/less-1.3.3.js"></script> When I load the page in my browser (Google Chrome v 27.0.1453.116) and enable the developer tools, it says Refused to execute script from 'https://raw.github.com/cloudhead/less.js/master/dist/less-1.3.3.js' because its MIME type ('text/plain') is not executable, and strict MIME type checking is enabled. Indeed, the script won't run. Why does Chrome think this is a plaintext file? It clearly has a js file extension. Since I'm using HTML5, I omitted the type attribute, so I thought that might be causing the problem. So I added type="text/javascript" to the <script> tag, and got the same result. I even tried type="application/javascript" and still, same error. Then I tried changing it to type="text/plain" just out of curiosity. The browser did not return an error, but of course the JavaScript did not run. Finally I thought the periods in the filename might be throwing the browser off. So in my HTML, I changed all the periods to the URL escape character %2E: <script src="https://raw.github.com/cloudhead/less%2Ejs/master/dist/less-1%2E3%2E3.js"></script> This still did not work. The only thing that truly works (i.e. the browser does not give an error and the JS successfully runs) is if I download the file, upload it to a local directory, and then change the src value to the local file. I'd rather not do this since I'm trying to save space on my own website. How do I get the Chrome to recognize that the linked file is actually a javascript type?

  Read the article

• ATI Radeon HD 6870 Driver fails to install default-policy.sh does not support version

  - by Rogue Coder

  I'm running Ubuntu 11.04 Beta, with everything updated completely. I'm using Ubuntu Classic, because Unity fails to run, supposedly because of my video card. The drivers for the Radeon HD 6870 series is apparently lacking, but I found a post stating the newest version has full support for Ubuntu Natty Narwhal. That post is slightly old, so i grabbed 11.3 for Ubuntu x86 off the ATI website. When I run the installation program, I receive the following error: > ./ati-driver-installer-11-3-x86.x86_64.run Created directory fglrx-install.uREFoO Verifying archive integrity... All good. Uncompressing ATI Catalyst(TM) Proprietary Driver-8.831.2......................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................... ===================================================================== ATI Technologies Catalyst(TM) Proprietary Driver Installer/Packager ===================================================================== Error: ./default_policy.sh does not support version default:v2:i686:lib::none:2.6.38-8-generic-pae:; make sure that the version is being correctly set by --iscurrentdistro ===================================================================== ATI Technologies Catalyst(TM) Proprietary Driver Installer/Packager ===================================================================== Error: ./default_policy.sh does not support version default:v2:i686:lib::none:2.6.38-8-generic-pae:; make sure that the version is being correctly set by --iscurrentdistro Removing temporary directory: fglrx-install.uREFoO > I would love to get the latest ATI drivers working so that I can try out Unity!

  Read the article

• Groovy Debugging

  - by Vijay Allen Raj

  Groovy Debugging - An Overview:ADF BC developers may express snippets of business logic (like the following) as embedded groovy expressions: default / calculated attribute valuesvalidation rules / conditionserror message tokensLOV input values (VO) This approach has the advantages that: Groovy has a compact, EL-like syntax for expressing simple logicADF has extended this syntax to provide useful built-insembedded Groovy expressions are customizableGroovy debugging support helps improve maintainability of business logic expressed in Groovy.Following is an example how groovy debugging works.Example:This example shows how a script expression validator can be created and the groovy script debugged. It shows Step over, breakpoint functionalities as well as syntax coloring.Let us create a ADFBC application based on Emp and Dept tables, and add a script expression validator based on the script:  if (Sal >= 5000){ //If EmpSal is greater than a property value set on the custom //properties on the root AM //raise a custom exception else raise a custom warning if (Sal >= source.DBTransaction.rootApplicationModule.propertiesMap.salHigh) { adf.error.raise("ExcGreaterThanApplicationLimit"); } else { adf.error.warn("WarnGreaterThan5000"); } } else if (EmpSal <= 1000) { adf.error.raise("ExcTooLow"); }return true;In the Emp.xml Flat editor, place breakpoints at various locations as shown below:Right click the appmodule and click Debug. Enter a value greater than 5000 and click next. You can see the debugging work as shown below:  The code can be also be stepped over and debugged.

  Read the article

• [Kubuntu 14.04][Eclipse] (ADT) crashes at button OK from Project properties

  - by nouseforname

  Since i upgraded to kubuntu 14.04, my Eclipse crashes at different situations. Mostly i can "simulate" it when going to project properties and press ok. Then it always crashes. My system: DISTRIB_ID=Ubuntu DISTRIB_RELEASE=14.04 DISTRIB_CODENAME=trusty DISTRIB_DESCRIPTION="Ubuntu 14.04.1 LTS" My Java: java version "1.8.0_05" Java(TM) SE Runtime Environment (build 1.8.0_05-b13) Java HotSpot(TM) 64-Bit Server VM (build 25.5-b02, mixed mode) My ADT Version: Android Development Toolkit Version: 23.0.0.1245622 I already tried to add this in adt-bundle-linux-x86_64/eclipse/configuration/configuration.ini org.eclipse.swt.browser.DefaultType=mozilla -Dorg.eclipse.swt.browser.DefaultType=mozilla Error: # # A fatal error has been detected by the Java Runtime Environment: # # SIGSEGV (0xb) at pc=0x00007fe049eb1718, pid=5964, tid=140601811232512 # # JRE version: Java(TM) SE Runtime Environment (8.0_05-b13) (build 1.8.0_05-b13) # Java VM: Java HotSpot(TM) 64-Bit Server VM (25.5-b02 mixed mode linux-amd64 compressed oops) # Problematic frame: # C [libgobject-2.0.so.0+0x19718] g_object_get_qdata+0x18 # # Core dump written. Default location: /home/maddin/core or core.5964 # # An error report file with more information is saved as: # /home/maddin/hs_err_pid5964.log Compiled method (nm) 28866 4166 n 0 org.eclipse.swt.internal.gtk.OS::_g_object_get_qdata (native) total in heap [0x00007fe051da6790,0x00007fe051da6af0] = 864 relocation [0x00007fe051da68b0,0x00007fe051da68f8] = 72 main code [0x00007fe051da6900,0x00007fe051da6ae8] = 488 oops [0x00007fe051da6ae8,0x00007fe051da6af0] = 8 # # If you would like to submit a bug report, please visit: # http://bugreport.sun.com/bugreport/crash.jsp # The crash happened outside the Java Virtual Machine in native code. # See problematic frame for where to report the bug. # Now, as soon as i change SystemSettings - Application Apperance - GTK - GTKn-Design to something else but "oxygen-gtk" this crash doesn't happen anymore. But the application appearance also is ugly. Beside that i get a lot of errors/warnings like that: (SWT:6148): GLib-GObject-CRITICAL **: g_closure_add_invalidate_notifier: assertion 'closure->n_inotifiers < CLOSURE_MAX_N_INOTIFIERS' failed or other GTK warnings from the particular design, not having theme-engine. Which actually doesn't cause any crahs it seems so far. So i have 3 options: accept crashes accept warnings (maybe the best choice) accept ugly design What can i do to solve this issue without changing the design settings?

  Read the article

• How can I install oracle-java7 from webupd8 ppa?

  - by Ahmed Zain El Dein

  I installed ppa:webupd8team/java and I get the following error Output from: sudo apt-get install oracle-java7-installer Reading package lists... Done Building dependency tree Reading state information... Done Suggested packages: binfmt-support visualvm ttf-baekmuk ttf-unfonts ttf-unfonts-core ttf-kochi-gothic ttf-sazanami-gothic ttf-kochi-mincho ttf-sazanami-mincho ttf-arphic-uming The following packages will be upgraded: oracle-java7-installer 1 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 1 not fully installed or removed. Need to get 0 B/16.0 kB of archives. After this operation, 64.5 kB of additional disk space will be used. Could not exec dpkg! E: Sub-process /usr/bin/dpkg returned an error code (100) i did afterwords those line of code trying to resolve the issue becuase it is not existed actually in the /usr/bin/dpkg there is no dpkg mkdir /tmp/dpkg cd /tmp/dpkg wget http://archive.ubuntu.com/ubuntu/pool/main/d/dpkg/dpkg_1.15.5.6ubuntu4_i386.deb ar x dpkg*.deb data.tar.gz tar xfvz data.tar.gz ./usr/bin/dpkg sudo cp ./usr/bin/dpkg /usr/bin/ sudo apt-get update sudo apt-get install --reinstall dpkg then i get this $ sudo apt-get install --reinstall dpkg Reading package lists... Done Building dependency tree Reading state information... Done 0 upgraded, 0 newly installed, 1 reinstalled, 0 to remove and 6 not upgraded. 1 not fully installed or removed. Need to get 0 B/1,814 kB of archives. After this operation, 0 B of additional disk space will be used. dpkg: warning: 'dpkg-deb' not found on PATH. dpkg: 1 expected program(s) not found on PATH. NB: root's PATH should usually contain /usr/local/sbin, /usr/sbin and /sbin. E: Sub-process /usr/bin/dpkg returned an error code (2) How can I fix this?

  Read the article

< Previous Page | 667 668 669 670 671 672 673 674 675 676 677 678  | Next Page >