Search Results

Search found 19525 results on 781 pages for 'say'.

Page 679/781 | < Previous Page | 675 676 677 678 679 680 681 682 683 684 685 686  | Next Page >

  • Building an array out of values from another array

    - by George
    This is a follow up from a question of mine that was just answered concerning parsing numbers in an array. I have an array, data[], with numbers that I'd like to use in a calculation and then put the resulting values into another array. So say data[0] = 100. I'd like to find a percentage using the calculatin, (data[0]/dataSum*100).toFixed(2) where dataSum is the sum of all the numbers in data[]. I've tried: dataPercentage = []; for (var i=0; i < data.length; i++) { data[i] = parseFloat(data[i]); dataSum += data[i]; // looping through data[i] and setting it equal to dataPercentage. dataPercentage[] = (data[i]/dataSum*100).toFixed(2); // thought maybe I was overriding dataPercentage everytime I looped? dataPercentage[] += (data[i]/dataSum*100).toFixed(2); } I also tried just setting dataPercentage = [(data/dataSum*100).toFixed(2)], but I think this creates a nested array, which I don't think is what I need.

    Read the article

  • Display data FROM Sheet1 on Sheet2 based on conditional value

    - by Shawn
    Imagine a worksheet with 30 pieces of information, such as: A1= Start Date A2 = End Date A3 = Resource Name A4 = Cost .... A30 = Whatever B1 = 1/1/2010 B2 = 2/15/2010 B3 = Joe Smith B4 = $10,000.00 ... B30 = Blah Blah Now imagine a third column, C. The purpose of the third column is to determine WHICH report that row of data needs to appear in. C1 = Report 1 C2 = Report 1 and Report 2 C3 = Report 4 and Report 7 C4 = Report 1 and Report 5 ... C30 = Report 2 Each report is on Sheets 2, 3, 4, 5 and so on (depending on how many I decide to create). As you can see form my example above, some data may need to appear in multiple reports. For example, the data in Row 3 (Resource Name: Joe Smith) needs to appear in Report 4 and Report 7. That is to say, it needs to DYNAMICALLY appear on two additional worksheets. If I change the values in column C, then the reports need to update automatically. How can I create the worksheets which will serve as the reports such that they only diaplay the rows which have been "flagged" to be displayed in that report? Thanks!

    Read the article

  • Creating a network adapter - how hard is it?

    - by Vilx-
    I'm interested in building a little (commercial) device on top of Arduino. I want it to be able to interface with network. Network as in standard Ethernet, Cat5, RJ-45, etc. I know that there is an Ethernet Shield, but it costs even more than the Arduino itself, and it's pretty big. Naturally, I want my device to be as small and as cheap as possible. So I'm thinking about recreating an Ethernet module myself. The problem is - I haven't got any experience with Ethernet, nor do I have a good idea where to start looking. Thus I can't even say if my ideas are feasible. Ultimately I would like the device to have three ports - one for incoming signal, two for outgoing, so the device is essentially a little switch where it is plugged in itself as well. The switching capabilities need not be very fast - the volume of data will be low. 10Mbit is more than enough, can be even slower. If that is not possible, a single port for controlling the device itself will also do. Another possibility I'm considering is power line communications - sending information through power lines. That's another area I've no experience with. What hardware should I be looking at, and where can I find information about the necessary software? So - can anyone tell me if these ideas are feasible, and if yes - where should I start looking?

    Read the article

  • Indexing table with duplicates MySQL/MSSQL with millions of records

    - by Tesnep
    I need help in indexing in MySQL. I have a table in MySQL with following rows: ID Store_ID Feature_ID Order_ID Viewed_Date Deal_ID IsTrial The ID is auto generated. Store_ID goes from 1 - 8. Feature_ID from 1 - let's say 100. Viewed Date is Date and time on which the data is inserted. IsTrial is either 0 or 1. You can ignore Order_ID and Deal_ID from this discussion. There are millions of data in the table and we have a reporting backend that needs to view the number of views in a certain period or overall where trial is 0 for a particular store id and for a particular feature. The query takes the form of: select count(viewed_date) from theTable where viewed_date between '2009-12-01' and '2010-12-31' and store_id = '2' and feature_id = '12' and Istrial = 0 In MSSQL you can have a filtered index to use for Istrial. Is there anything similar to this in MySQL? Also, Store_ID and Feature_ID have a lot of duplicate data. I created an index using Store_ID and Feature_ID. Although this seems to have decreased the search period, I need better improvement than this. Right now I have more than 4 million rows. To search for a particular query like the one above, it looks at 3.5 million rows in order to give me the count of 500k rows. PS. I forgot to add view_date filter in the query. Now I have done this.

    Read the article

  • Need a Java based interruptible timer thread

    - by LambeauLeap
    I have a Main Program which is running a script on the target device(smart phone) and in a while loop waiting for stdout messages. However in this particular case, some of the heartbeat messages on the stdout could be spaced almost 45secs to a 1minute apart. something like: stream = device.runProgram(RESTORE_LOGS, new String[] {}); stream.flush(); String line = stream.readLine(); while (line.compareTo("") != 0) { reporter.commentOnJob(jobId, line); line = stream.readLine(); } So, I want to be a able to start a new interruptible thread after reading line from stdout with a required a sleep window. Upon being able to read a new line, I want to be able to interrupt/stop(having trouble killing the process), handle the newline of stdout text and restart a process. And it the event I am not able to read a line within the timer window(say 45secs) I want to a way to get out of my while loop either. I already tried the thread.run, thread.interrupt approach. But having trouble killing and starting a new thread. Is this the best way out or am I missing something obvious?

    Read the article

  • C++ Constructor With Parameters Won't Initialize, Errors C2059 and C2228

    - by Some Girl
    I'm a C# programmer trying to muddle through C++ to create a Windows Forms Application. I have a Windows Form that makes use of a user-created class. Basically I'm trying to use a constructor that takes parameters, but my form won't let me initialize the object with parameter. Here's the code, hopefully somebody can explain the problem to me because I'm completely baffled... Here's my header file: BankAcct.h public ref class BankAcct { private: int money; public: BankAcct(); BankAcct(int); void Deposit(int); void GetBalance(int&); }; And my definition file: BankAcct.cpp #include "StdAfx.h" #include "BankAcct.h" BankAcct::BankAcct() { money = 0; } BankAcct::BankAcct(int startAmt) { money = startAmt; } void BankAcct::Deposit(int depAmt) { money += depAmt; } void BankAcct::GetBalance(int& balance) { balance = money; } And finally my main form. Won't copy the whole thing, of course, but I'm trying to declare the new bank account object, and start it with a balance of say $50. private: BankAcct myAccount(50); //does not work! WHY?? //private: //BankAcct myAccount; //works then in the form constructor my code is this: public: frmBank(void) { InitializeComponent(); int bal; myAccount.GetBalance(bal); lblBankBalance->Text += Convert::ToString(bal); } I've included the BankAcct.h file at the top of my frmBank.h, what else am I doing wrong here? It works great if I use the default constructor (the one that starts the bank balance at zero). I get the following error messages: error C2059: syntax error: 'constant' and error C2228: left of '.GetBalance' must have class/struct/union Thank you for any and all help on this one!!

    Read the article

  • Passing Object From Controller to JavaScript JQuery

    - by TMan
    This is driving me crazy. All I'm trying to do is to pass in a Id to a ActionMethod which is working and have an Object be returned to the javascript. Then in javascript, I want to be able to say something like..Objec.Property, ie/ Student.Name, or Student.GPA. Any help is appreciated. I tried json but couldn't get that to work either. ActionResult: [AcceptVerbs(HttpVerbs.Get)] public Epic GetEpicPropertyDetails(int id) { var Epictemplist = epicRepository.Select().Where(x => x.Id.Equals(id)); return Epictemplist.SingleOrDefault(); } javascript: <script type="text/javascript"> $(document).ready(function () { $(".ListBoxClass").click(function (event) { var selectedid = $(this).find("option:selected").val(); event.preventDefault(); $.get("/Estimate/GetEpicPropertyDetails", { id: selectedid }, function (result) { $(".TimeClass").val(result); }); }); }); </script> result.Name is obviously wrong I just dont know how to call this the right way.

    Read the article

  • Unit Testing - Algorithm or Sample based ?

    - by ohadsc
    Say I'm trying to test a simple Set class public IntSet : IEnumerable<int> { Add(int i) {...} //IEnumerable implementation... } And suppose I'm trying to test that no duplicate values can exist in the set. My first option is to insert some sample data into the set, and test for duplicates using my knowledge of the data I used, for example: //OPTION 1 void InsertDuplicateValues_OnlyOneInstancePerValueShouldBeInTheSet() { var set = new IntSet(); //3 will be added 3 times var values = new List<int> {1, 2, 3, 3, 3, 4, 5}; foreach (int i in values) set.Add(i); //I know 3 is the only candidate to appear multiple times int counter = 0; foreach (int i in set) if (i == 3) counter++; Assert.AreEqual(1, counter); } My second option is to test for my condition generically: //OPTION 2 void InsertDuplicateValues_OnlyOneInstancePerValueShouldBeInTheSet() { var set = new IntSet(); //The following could even be a list of random numbers with a duplicate var values = new List<int> { 1, 2, 3, 3, 3, 4, 5}; foreach (int i in values) set.Add(i); //I am not using my prior knowledge of the sample data //the following line would work for any data CollectionAssert.AreEquivalent(new HashSet<int>(values), set); } Of course, in this example, I conveniently have a set implementation to check against, as well as code to compare collections (CollectionAssert). But what if I didn't have either ? This is the situation when you are testing your real life custom business logic. Granted, testing for expected conditions generically covers more cases - but it becomes very similar to implementing the logic again (which is both tedious and useless - you can't use the same code to check itself!). Basically I'm asking whether my tests should look like "insert 1, 2, 3 then check something about 3" or "insert 1, 2, 3 and check for something in general" EDIT - To help me understand, please state in your answer if you prefer OPTION 1 or OPTION 2 (or neither, or that it depends on the case, etc )

    Read the article

  • using replace to produce javascript code, django

    - by durdenk
    I want to use highcharts with my django site but it requires a comlex javascript code such as below. So I wanted to get this script in my python code and replace apropriate portions then write it in my template, first question is, is this a dump way to do that for a person not knowing javascript. I can read it tough. Second question is, Why I cant replace this string. Lets say this string is a variable like this. lineChartsTemplate = """ ... ... """ if I try and do lineChartsTemplate .replace('dataCategory', dataCategory) it basically suppossed to change dataCategory text with my dataCategory variable, but no such luck. I need guidance here. thx. $(function () { var chart = new Highcharts.Chart({ chart: { renderTo: 'container', type: 'bar' }, xAxis: { categories: dataCategory }, yAxis: { }, legend: { layout: 'vertical', floating: true, backgroundColor: '#FFFFFF', align: 'right', verticalAlign: 'top', y: 60, x: -60 }, tooltip: { formatter: function() { return '<b>'+ this.series.name +'</b><br/>'+ this.x +': '+ this.y; } }, plotOptions: { }, series: [{ data: dataList , name : 'Satislar'}] }); });

    Read the article

  • T4MVC Optional Parameter Inferred From Current Context

    - by Itakou
    I have read the other post about this at T4MVC OptionalParameter values implied from current context and I am using the latest T4MVC (2.11.1) which is suppose to have the fix in. I even checked checked to make sure that it's there -- and it is. I am still getting the optional parameters filled in based on the current context. For example: Let's say I have a list that is by default ordered by a person's last name. I have the option to order by first name instead with the URL http://localhost/list/stuff?orderby=firstname When I am in that page, I want to go back to order by first name with the code: @Html.ActionLink("order by last name", MVC.List.Stuff(null)) the link I wanted was simply http://localhost/list/stuff without any parameters to keep the URL simple and short - invoking default behaviors within the action. But instead the orderby is kept and the url is still http://localhost/list/stuff?orderby=firstname Any help would be great. I know that in the most general cases, this does remove the query parameter - maybe I do have a specific case where it was not removed. I find that it only happens when I have the URL inside a page that I included with RenderPartial. My actual code is <li>@Html.ActionLink("Recently Updated", MVC.Network.Ticket.List(Model.UI.AccountId, "LastModifiedDate", null, null, null, null, null))</li> <li>@Html.ActionLink("Recently Created", MVC.Network.Ticket.List(Model.UI.AccountId, "CreatedDate", null, null, null, null, null))</li> <li>@Html.ActionLink("Most Severe", MVC.Network.Ticket.List(Model.UI.AccountId, "MostSevere", null, null, null, null, null))</li> <li>@Html.ActionLink("Previously Closed", MVC.Network.Ticket.List(Model.UI.AccountId, "LastModifiedDate", null, "Closed", null, null, null))</li> the problem happens when someone clicks Previously Closed and and go to ?status=closed. When they click Recently Updated, which I want to the ?status so that it shows the active ones, the ?status=closed stays. Any insight would be greatly appreciated.

    Read the article

  • Objective-C Objects Having Each Other as Properties

    - by mwt
    Let's say we have two objects. Furthermore, let's assume that they really have no reason to exist without each other. So we aren't too worried about re-usability. Is there anything wrong with them "knowing about" each other? Meaning, can each one have the other as a property? Is it OK to do something like this in a mythical third class: Foo *f = [[Foo alloc] init]; self.foo = f; [f release]; Bar *b = [[Bar alloc] init]; self.bar = b; [b release]; foo.bar = bar; bar.foo = foo; ...so that they can then call methods on each other? Instead of doing this, I'm usually using messaging, etc., but sometimes this seems like it might be a tidier solution. I hardly ever see it in example code (maybe never), so I've shied away from doing it. Can somebody set me straight on this? Thanks.

    Read the article

  • Java Inheritance doubt in parameterised collection

    - by Gala101
    It's obvious that a parent class's object can hold a reference to a child, but does this not hold true in case of parameterised collection ?? eg: Car class is parent of Sedan So public void doSomething(Car c){ ... } public void caller(){ Sedan s = new Sedan(); doSomething(s); } is obviously valid But public void doSomething(Collection<Car> c){ ... } public void caller(){ Collection<Sedan> s = new ArrayList<Sedan>(); doSomething(s); } Fails to compile Can someone please point out why? and also, how to implement such a scenario where a function needs to iterate through a Collection of parent objects, modifying only the fields present in parent class, using parent class methods, but the calling methods (say 3 different methods) pass the collection of three different subtypes.. Ofcourse it compiles fine if I do as below: public void doSomething(Collection<Car> c){ ... } public void caller(){ Collection s = new ArrayList<Sedan>(); doSomething(s); }

    Read the article

  • Android: How to periodically check current location without draining the battery

    - by uyahalom
    I have a background service which works periodically by timer.scheduleAtFixedRate. It wakes up every amount of time (let's say 60 seconds for example) and checks for the location. The location is checked by locManager.requestLocationUpdates(LocationManager.GPS_PROVIDER, 60000, 5, listener); and the actual location is collected from the listener's onLocationChanged. Now, when the phone is outside and GPS reception is good, this works fine. But, if the phone is inside, the GPS is almost always active - looking for a signal, and the battery is drained rapidly. I created another thread using a Handler and a Runnable in order to conrol the GPS active time accurately: I used locManager.requestLocationUpdates(LocationManager.GPS_PROVIDER, 0, 0, listener); and locManager.removeUpdates(listener); so I can open and close the GPS as I want. In this case, I can open the GPS for the exact amount of time, but found out that it doesn't lock in an area with good reception even after 10 seconds. So here I'm draining the battery again... I'm using API level 7, hence I cannot use locationManager.requestSingleUpdate. I have two questions: Is there any way to optimize this process? Will upgrading to API level 9 (and use locationManager.requestSingleUpdate) improve the process significantly? I mean, does it worth upgrading?

    Read the article

  • In the meantime, to be or not to be ... productive!

    - by Jan Kuboschek
    I just moved back to Europe from the US after living there for 7 years. Apart from major adjustment issues, I'm currently looking for a job over here. I'm mainly interested in (IT) Consulting and, since these jobs typically require programming knowledge, such as Java, I'm trying to think of something productive to write (perhaps to demo my skills) while I'm waiting for my interviews (starting in two weeks. Folks here are a bit slower than in the US apparently...). I graduated from college about a year and a half ago and have a 4 year degree in international management/economics and about 3/4 of a 2 year degree in computer science finished. I've written my fair share of web software over the years, but nothing concrete that I could show, especially not in Java. Now, I've never had the problem of not having any idea what to write. Basic games I could write, but I'm not sure how well that'll come over when I walk into my interview and say "hey, I was bored. Take a look at my multiplayer space invaders game! Wanna try beating me??". Any thoughts? I browsed SourceForge the other day to find a nice little project to contribute to, but decided that I don't want to commit to someone else's project at this time. Any ideas, perhaps from someone who has been, or currently is, in a similar position would be much appreciated. Oh, and lastly: Instead of developing a program or two to demonstrate my skills, I could spend my time brushing up on UML and Perl. Any suggestions regarding that? Writing a demo vs. learning something new?

    Read the article

  • jtable update data not visible

    - by Thomas n
    I am running into a problem similar to what I have read here about inserted data and added data not showing up on jtable. I have tried repaint() and revalidate(), but to no avail. Basically, I have two classes say A and B. A calls a function in class B to add a row of data to the table. Here is the code.(By the way I am using Netbeans 7.1.2 to add a table and then add some code to handle the update.) public void callUpdateTable(){ DefaultTableModel myModel = (DefaultTableModel)jTable1.getModel(); DateFormat dateFormate = new SimpleDateFormat("MM/dd/yyyy HH:mm:ss"); Object[] str = new Object[3]; Date date = new Date(); str[0] = dateFormate.format(date); str[1] = "Robot"; str[2] = "hello"; // myModel.addRow(str); myModel.insertRow(1, str); myModel.setValueAt("Hello", 1, 2); System.out.println("count = " + myModel.getValueAt(1, 2)); jTable1.repaint(); } The funny thing is on system print it prints out the value at the cell(1,2) I set the value, but doesn't show up on the table. Thank you for your help.

    Read the article

  • Iphone Core Data Internal Inconsistency

    - by kiyoshi
    This question has something to do with the question I posted here: http://stackoverflow.com/questions/1230858/iphone-core-data-crashing-on-save however the error is different so I am making a new question. Now I get this error when trying to insert new objects into my managedObjectContext: *** Terminating app due to uncaught exception 'NSInternalInconsistencyException', reason: '"MailMessage" is not a subclass of NSManagedObject.' But clearly it is: @interface MailMessage : NSManagedObject { .... And when I run this code: NSManagedObjectModel *managedObjectModel = [[self.managedObjectContext persistentStoreCoordinator] managedObjectModel]; NSEntityDescription *entity =[[managedObjectModel entitiesByName] objectForKey:@"MailMessage"]; NSManagedObject *newObject = [[NSManagedObject alloc] initWithEntity:entity insertIntoManagedObjectContext:self.managedObjectContext]; It runs fine when I do not present an MFMailComposeViewController, but if I run this code in the - (void)mailComposeController:(MFMailComposeViewController*)controller didFinishWithResult:(MFMailComposeResult)result error:(NSError*)error { method, it throws the above error when creating the newObject variable. The entity object when I use print object produces the following: (<NSEntityDescription: 0x1202e0>) name MailMessage, managedObjectClassName MailMessage, renamingIdentifier MailMessage, isAbstract 0, superentity name (null), properties { in both cases, so I don't think the managedObjectContext is completely invalid. I have no idea why it would say MailMessage is not a subclass of NSManagedObject at that point, and not at the other. Any help would be appreciated, thanks in advance.

    Read the article

  • Windows Phone 7 applications - Orientation Change

    - by Peter Perhác
    Hello there fellow developers! I am working on a Windows Phone 7 app and I can't figure out what I believe is a simple problem for the more seasoned ones. Say I have a layout consisting of two elements: a ListBox (filled with an abundance of items) and a TextBlock (providing the user with some basic instructions). I want these to be one above the other when the device is in Portrait orientation and I want these to be next to each other when the device orientation changes to Landscape. For the Portrait orientation I am using a Grid layout manager, as it lets me define the rows' heights like so... row 0 Height="2*", row 1 Height="*" Listbox sits in row 0, TextBlock in row 1. Now, what would be really neat is to simple change the RowDefinitions into ColumnDefinitions and reassign the listbox/textblock to the grid's columns instead of rows for when the device switches into Landscape. But that's just my idea. I don't know how to get this done elegantly. Maybe there's a better approach to this? Or maybe this is the correct approach and there is some method built for exactly this purpose? Thank you for your suggestions!

    Read the article

  • iPhone: Which are the most useful techniques for faster Bluetooth?

    - by Mike Howard
    Hi. I'm adding peer-to-peer bluetooth using GameKit to an iPhone shoot-em-up, so speed is vital. I'm sending about 40 messages a second each way, most of them with the faster GKSendDataUnreliable, all serializing with NSCoding. In testing between a 3G and 3GS, this is slowing the 3G down a lot more than I'd like. I'm wondering where I should concentrate my efforts to speed it up. How much slower is GKSendDataReliable? For the few packets that have to get there, would it be faster to send a GKSendDataUnreliable and have the peer send an acknowledgement so I can send again if I don't get the Ack within, say, 100ms? How much faster would it be to create the NSData instance using a regular C array rather than archiving with the NSCoding protocol? Is this serialization process (for about a dozen floats) just as slow as you'd expect from an object creation/deallocation overhead, or is something particularly slow happening? I heard that (for example) sending four seperate sets of data is much, much slower, than sending one piece of data four times the size. Would I make a significant saving by sending separate packets of data that wouldn't always go together in the same packet when they happen at the same time? Are there any other bluetooth performance secrets I've missed? Thanks for your help.

    Read the article

  • Which are the most useful techniques for faster Bluetooth?

    - by Mike Howard
    Hi. I'm adding peer-to-peer bluetooth using GameKit to an iPhone shoot-em-up, so speed is vital. I'm sending about 40 messages a second each way, most of them with the faster GKSendDataUnreliable, all serializing with NSCoding. In testing between a 3G and 3GS, this is slowing the 3G down a lot more than I'd like. I'm wondering where I should concentrate my efforts to speed it up. How much slower is GKSendDataReliable? For the few packets that have to get there, would it be faster to send a GKSendDataUnreliable and have the peer send an acknowledgement so I can send again if I don't get the Ack within, say, 100ms? How much faster would it be to create the NSData instance using a regular C array rather than archiving with the NSCoding protocol? Is this serialization process (for about a dozen floats) just as slow as you'd expect from an object creation/deallocation overhead, or is something particularly slow happening? I heard that (for example) sending four seperate sets of data is much, much slower, than sending one piece of data four times the size. Would I make a significant saving by sending separate packets of data that wouldn't always go together in the same packet when they happen at the same time? Are there any other bluetooth performance secrets I've missed? Thanks for your help.

    Read the article

  • Modular Inverse and BigInteger division

    - by dano82
    I've been working on the problem of calculating the modular inverse of an large integer i.e. a^-1 mod n. and have been using BigInteger's built in function modInverse to check my work. I've coded the algorithm as shown in The Handbook of Applied Cryptography by Menezes, et al. Unfortunately for me, I do not get the correct outcome for all integers. My thinking is that the line q = a.divide(b) is my problem as the divide function is not well documented (IMO)(my code suffers similarly). Does BigInteger.divide(val) round or truncate? My assumption is truncation since the docs say that it mimics int's behavior. Any other insights are appreciated. This is the code that I have been working with: private static BigInteger modInverse(BigInteger a, BigInteger b) throws ArithmeticException { //make sure a >= b if (a.compareTo(b) < 0) { BigInteger temp = a; a = b; b = temp; } //trivial case: b = 0 => a^-1 = 1 if (b.equals(BigInteger.ZERO)) { return BigInteger.ONE; } //all other cases BigInteger x2 = BigInteger.ONE; BigInteger x1 = BigInteger.ZERO; BigInteger y2 = BigInteger.ZERO; BigInteger y1 = BigInteger.ONE; BigInteger x, y, q, r; while (b.compareTo(BigInteger.ZERO) == 1) { q = a.divide(b); r = a.subtract(q.multiply(b)); x = x2.subtract(q.multiply(x1)); y = y2.subtract(q.multiply(y1)); a = b; b = r; x2 = x1; x1 = x; y2 = y1; y1 = y; } if (!a.equals(BigInteger.ONE)) throw new ArithmeticException("a and n are not coprime"); return x2; }

    Read the article

  • Using an embedded DB (SQLite / SQL Compact) for Message Passing within an app?

    - by wk1989
    Hello, Just out of curiosity, for applications that have a fairly complicated module tree, would something like sqlite/sql compact edition work well for message passing? So if I have modules containing data such as: \SubsystemA\SubSubSysB\ModuleB\ModuleDataC, \SubSystemB\SubSubSystemC\ModuleA\ModuleDataX Using traditional message passing/routing, you have to go through intermediate modules in order to pass a message to ModuleB to request say ModuleDataC. Instead of doing that, if we we simply store "\SubsystemA\SubSubSysB\ModuleB\ModuleDataC" in a sqlite database, getting that data is as simple as a sql query and needs no routing and passing stuff around. Has anyone done this before? Even if you haven't, do you foresee any issues & performance impact? The only concern I have right now would be the passing of custom types, e.g. if ModuleDataC is a custom data structure or a pointer, I'll need some way of storing the data structure into the DB or storing the pointer into the DB. Thanks, JW EDIT One usage case I haven't thought about is when you want to send a message from ModuleA to ModuleB to get ModuleB to do something rather than just getting/setting data. Is it possible to do this using an embedded DB? I believe callback from the DB would be needed, how feasible is this?

    Read the article

  • What kind of data do I pass into a Django Model.save() method?

    - by poswald
    Lets say that we are getting POSTed a form like this in Django: rate=10 items= [23,12,31,52,83,34] The items are primary keys of an Item model. I have a bunch of business logic that will run and create more items based on this data, the results of some db lookups, and some business logic. I want to put that logic into a save signal or an overridden Model.save() method of another model (let's call it Inventory). The business logic will run when I create a new Inventory object using this form data. Inventory will look like this: class Inventory(models.Model): picked_items = models.ManyToManyField(Item, related_name="items_picked_set") calculated_items = models.ManyToManyField(Item, related_name="items_calculated_set") rate = models.DecimalField() ... other fields here ... New calculated_items will be created based on the passed in items which will be stored as picked_items. My question is this: is it better for the save() method on this model to accept: the request object (I don't really like this coupling) the form data as arguments or kwargs (a list of primary keys and the other form fields) a list of Items (The caller form or view will lookup the list of Items and create a list as well as pass in the other form fields) some other approach? I know this is a bit subjective, but I was wondering what the general idea is. I've looked through a lot of code but I'm having a hard time finding a pattern I like.

    Read the article

  • Recursive search Linq to xml

    - by Raj Esh
    this is my sample xml. <Messages> <Conversation> <id>Z100</id> <ReplyToId></ReplyToId> <Message>Topic</Message> </Conversation> <Conversation> <id>A100</id> <ReplyToId></ReplyToId> <Message>This is a test</Message> </Conversation> <Conversation> <id>M100</id> <ReplyToId>A100</ReplyToId> <Message>What kind of test</Message> </Conversation> <Conversation> <id>A200</id> <ReplyToId>M100</ReplyToId> <Message>Stage 1</Message> </Conversation> <Conversation> <id>M200</id> <ReplyToId>A200</ReplyToId> <Message>Test result for </Message> </Conversation> </Messages> How to get the conversation list based on id using linq in C#. Say for example, If i want to get the conversation for id "A100" which has a link to other conversation based on ReplyToid.

    Read the article

  • How do Oracle Forms compare to Microsoft Access as a "front-end"?

    - by webworm
    I recently started a project where I was set to build an ADP based application in Access 2003. The font end GUI was going to be in Access while all the data resided in MS SQL Server. I say "was", because the powers that be have decided that Oracle Forms might be a better choice than Access and SQL Server. The place where I am doing this work is an Oracle shop where they use Oracle 10g. They also use Oracle Forms quite a bit internally. As for me I am always up for learning anything new. I have always been a rather "eclectic" developer (I work with .NET WinForms, ASP.NET, Java, C#, Python, and Access) so I would not mind moving to Oracle Forms as long as it could do the same things as MS Access (hopefully even more as VBA is rather limited). So my question is this. How does Oracle Forms (10g) compare to MS Access for developing a GUI application? Access uses VBA for it's language, what does Oracle Forms use? I know the Forms app is a Java applet. Does that means you can write Oracle Forms using Java?

    Read the article

  • PHP & MYSQL: How can i neglect empty variables from select

    - by cash-cash
    hello all; if i have 4 variables and i want to select DISTINCT values form data base <?php $var1 = ""; //this variable can be blank $var2 = ""; //this variable can be blank $var3 = ""; //this variable can be blank $var4 = ""; //this variable can be blank $result = mysql_query("SELECT DISTINCT title,description FROM table WHERE **keywords ='$var1' OR author='$var2' OR date='$var3' OR forums='$var4'** "); ?> note: some or all variables ($var1,$var2,$var3,$var4) can be empty what i want: i want to neglect empty fields lets say that $var1 (keywords) is empty it will select all empty fileds, but i want if $var1 is empty the result will be like $result = mysql_query("SELECT DISTINCT title,description FROM table WHERE author='$var2' OR date='$var3' OR forums='$var4' "); if $var2 is empty the result will be like $result = mysql_query("SELECT DISTINCT title,description FROM table WHERE keywords ='$var1' OR date='$var3' OR forums='$var4' "); if $var1 and $var2 are empty the result will be like $result = mysql_query("SELECT DISTINCT title,description FROM table WHERE date='$var3' OR forums='$var4' "); and so on

    Read the article

< Previous Page | 675 676 677 678 679 680 681 682 683 684 685 686  | Next Page >