Search Results

Search found 2619 results on 105 pages for 'edge transport'.

Page 68/105 | < Previous Page | 64 65 66 67 68 69 70 71 72 73 74 75  | Next Page >

  • WCF Service error received when using TCP: "The message could not be dispatched..."

    - by StM
    I am new to creating WCF services. I have created a WCF web service in VS2008 that is running on IIS 7. When I use http the service works perfectly. When I configure the service for TCP and run I get the following error message. There was a communication problem. The message could not be dispatched because the service at the endpoint address 'net:tcp://elec:9090/CoordinateIdTool_Tcp/IdToolService.svc is unavailable for the protocol of the address. I have searched a lot of forums, including this one, for a resolution but nothing has worked. Everything appears to be set up correctly on IIS 7. WAS has been set up to run. The default web site has a net.tcp binding and the application has net.tcp under the enabled protocols. I am including what I think is the important part of the web.config from the host project and also the app.config from the client project I am using to test the service. Hopefully someone can spot my error. Thanks in advance for any help or recommendations that anyone can provide. Web.Config <bindings> <wsHttpBinding> <binding name="wsHttpBindingNoMsgs"> <security mode="None" /> </binding> </wsHttpBinding> </bindings> <services> <service behaviorConfiguration="CogIDServiceHost.ServiceBehavior" name="CogIDServiceLibrary.CogIdService"> <endpoint address="" binding="wsHttpBinding" bindingConfiguration="wsHttpBindingNoMsgs" contract="CogIDServiceLibrary.CogIdTool"> <identity> <dns value="localhost" /> </identity> </endpoint> <endpoint address="mex" binding="mexHttpBinding" bindingConfiguration="" contract="IMetadataExchange" /> <endpoint name="CoordinateIdService_TCP" address="net.tcp://elec:9090/CoordinateIdTool_Tcp/IdToolService.svc" binding="netTcpBinding" bindingConfiguration="" contract="CogIDServiceLibrary.CogIdTool"> <identity> <dns value="localhost" /> </identity> </endpoint> </service> </services> <behaviors> <serviceBehaviors> <behavior name="CogIDServiceHost.ServiceBehavior"> <serviceMetadata httpGetEnabled="true" /> <serviceDebug includeExceptionDetailInFaults="false" /> </behavior> </serviceBehaviors> </behaviors> App.Config <system.serviceModel> <diagnostics performanceCounters="Off"> <messageLogging logEntireMessage="true" logMalformedMessages="false" logMessagesAtServiceLevel="false" logMessagesAtTransportLevel="false" /> </diagnostics> <behaviors /> <bindings> <wsHttpBinding> <binding name="WSHttpBinding_CogIdTool" closeTimeout="00:01:00" openTimeout="00:01:00" receiveTimeout="00:10:00" sendTimeout="00:01:00" bypassProxyOnLocal="false" transactionFlow="false" hostNameComparisonMode="StrongWildcard" maxBufferPoolSize="524288" maxReceivedMessageSize="65536" messageEncoding="Text" textEncoding="utf-8" useDefaultWebProxy="true" allowCookies="false"> <readerQuotas maxDepth="32" maxStringContentLength="8192" maxArrayLength="16384" maxBytesPerRead="4096" maxNameTableCharCount="16384" /> <reliableSession ordered="true" inactivityTimeout="00:10:00" enabled="false" /> <security mode="None"> <transport clientCredentialType="Windows" proxyCredentialType="None" realm="" /> <message clientCredentialType="Windows" negotiateServiceCredential="true" establishSecurityContext="true" /> </security> </binding> <binding name="wsHttpBindingNoMsg"> <security mode="None"> <transport clientCredentialType="Windows" /> <message clientCredentialType="Windows" /> </security> </binding> </wsHttpBinding> </bindings> <client> <endpoint address="http://sdet/CogId_WCF/IdToolService.svc" binding="wsHttpBinding" bindingConfiguration="wsHttpBindingNoMsg" contract="CogIdServiceReference.CogIdTool" name="IISHostWsHttpBinding"> <identity> <dns value="localhost" /> </identity> </endpoint> <endpoint address="http://localhost:1890/IdToolService.svc" binding="wsHttpBinding" bindingConfiguration="WSHttpBinding_CogIdTool" contract="CogIdServiceReference.CogIdTool" name="WSHttpBinding_CogIdTool"> <identity> <dns value="localhost" /> </identity> </endpoint> <endpoint address="http://elec/CoordinateIdTool/IdToolService.svc" binding="wsHttpBinding" bindingConfiguration="wsHttpBindingNoMsg" contract="CogIdServiceReference.CogIdTool" name="IIS7HostWsHttpBinding_Elec"> <identity> <dns value="localhost" /> </identity> </endpoint> <endpoint address="net.tcp://elec:9090/CoordinateIdTool_Tcp/IdToolService.svc" binding="netTcpBinding" bindingConfiguration="" contract="CogIdServiceReference.CogIdTool" name="IIS7HostTcpBinding_Elec" > <identity> <dns value="localhost"/> </identity> </endpoint> </client> </system.serviceModel>

    Read the article

  • How to use Device Emulator to debug my WinCE application

    - by ame
    I am working with an MFC application built on a WinCE platform in Visual Studio. I need to debug this application and I cannot do it using KITL and the hardware. I tried to use Device Emulator for this: I started a new Platform Builder Project (PDA Device, enterprise webpad). I built it after ensureing that KITL was enabled and so was kernel debugger. Once built, i set the target connectivity options as ce device, download and transport set to Device Emulator and Debugger is KdStub. Once I hit Attach to Device, the doload to target window pops up and then the RelDir window also does. However nothing happens after this and in the output window it says: PB Debugger The Kernel Debugger is waiting to connect with target. Please guide me on what I need to do to debug my application. Thankyou!

    Read the article

  • Calculating a 12-month moving average of weekly series, but anchored at the last day of the month

    - by richardh
    I have a zoo object oi.zoo with weekly data. I would like to sooth this with a 12-month moving average (easy enough), but I can't figure out how to anchor the right edge of the the moving average window at the end of the month (to correspond with the on which factors I am regressing). For example: > head(oi.zoo) 1986-01-15 1986-01-31 1986-02-14 1986-02-28 1986-03-14 1986-03-31 2966182 2986748 2948045 2990979 2993453 2936038 > head(mkt) 1926-07-31 1926-08-31 1926-09-30 1926-10-31 1926-11-30 1926-12-31 2.62 2.56 0.36 -3.43 2.44 2.77 I have some other factors and plan on using dynlm to regress. Thanks!

    Read the article

  • Sending an Email Using Java

    - by user217029
    try{ Properties props = new Properties(); props.put("mail.smtp.host", "ipc-smtp.bits-pilani.ac.in"); Session sess = Session.getInstance(props, null); sess.setDebug(true); Message msg = new MimeMessage(sess); InternetAddress addressFrom = new InternetAddress("[email protected]"); msg.setFrom(addressFrom); msg.setRecipient(Message.RecipientType.TO, new InternetAddress("[email protected]")); msg.addHeader("MyHeaderName", "myHeaderValue"); msg.setSubject("Test"); msg.setContent("Yippe", "text/plain"); Transport.send(msg); }catch(Exception exp){ exp.printStackTrace(); } The error is javax.mail.MessagingException: 554 The mail was blocked due to zen-spamhaus RBL action This is my college's smtp server.

    Read the article

  • Parsing and validating arbitrary date formats in ruby (on rails)

    - by Matt Briggs
    I have a requirement to handle custom date formats in an existing app. The idea is that the users have to do with multiple formats from outside sources they have very little control over. We will need to be able to take the format and both validate Dates against it, as well as parse strings specifically in that format. The other thing is that these can be completely arbitrary, like JA == January, FE == February, etc... to my understanding, chronic only handles parsing (and does it in a more magical way then I can use), and enter code here DateTime#strptime comes close, but doesn't really handle the whole two character month scenario, even with custom formatters. The 'nuclear' option is to write in custom support for edge cases like this, but I would prefer to use a library if something like this exists.

    Read the article

  • Making div fixed vertically but glued to the page's border horizontally

    - by George
    Hi! Can you please go to: http://www.binarymark.com/Products/ColorPickerPro/default.aspx and note the page's layout. What I want to do is to stick or "glue" some small div to the right side of the page, that is so that it's just outside of the right frame of the page. However, vertically I want the div to be fixed to a Window, that is no matter how much the page is scrolled, it should remain a fixed 300px from the top edge of the window. Here's what it should look like http://www.binarymark.com/layexp.png Can you help me please? Seems easy, but I have no idea how to combine vertical fixed positioning and horizontal relative/absolute positioning and making sure it supports all major browsers. Thanks.

    Read the article

  • Sending message from one server to another in Twisted

    - by Casey Patton
    I've implemented my servers in the following way: def makeServer(application, port): factory = protocol.ServerFactory() factory.protocol = MyChat factory.clients = [] internet.TCPServer(port, factory).setServiceParent(application) application = service.Application("chatserver") server1 = makeServer(application, port=1025) server2 = makeServer(application, port=1026) server3 = makeServer(application, port=1027) Note that MyChat is an event handling class that has a "receiveMessage" action: def lineReceived(self, line): print "received", repr(line) for c in self.factory.clients: c.transport.write(message + '\n') I want server1 to be able to pass messages to server2. Rather, I want server1 to be treated as a client of server2. If server1 receives the message "hi" then I want it to send that same exact message to server2. How can I accomplish this?

    Read the article

  • How do I draw a graduated border on a polygon using GDI+ via C#/WinForms?

    - by AndyJ
    I have polygons of various shapes and sizes. They have a solid fill and currently a solid border. I would like to give the polygons a gradient on their edge to soften them. So far I've tried using a Pen with a LinearGradientBrush and whilst the effect it produces is very interesting it's most definitely not what I want ;) I've looked through the System.Drawing.Drawing2D namespace but there didn't seem to be any other classes that would be applicable for this purpose. I've had a search around and the articles that I can find are mostly about creating borders for rectangles, which are mush easier, or are irrelevant. So to summarize, does anyone have a way of drawing a gradient border in on a polygon using GDI+?

    Read the article

  • How to stop IE8 from expanding a nested div's width to fit parent div?

    - by Tony_Henrich
    I have a page with several levels of divs. In one of the inner divs, there are two divs (1 & 2) which have float; left so that they are on the same horizontal level. It looks good in FireFox, but in the IE8, div 2 is below div 1. I turned the borders on and noticed div2 (violet border) is filling the width of the parent box. In FF, the width is the width of all the content only. If I use a hard coded width (not a good idea), IE8 displays it fine. How can I make IE8 not expand the width of div2 to the right edge of its parent div? IE8 (not good: div2 width is expanded) Firefox (good: width of div2 is not expanded)

    Read the article

  • Compilation hangs for a class with field double d = 2.2250738585072012e-308

    - by 01es
    I have come across an interesting situation. A coworker committed some changes, which would not compile on my machine neither from the IDE (Eclipse) nor from a command line (Maven). The problem manifested in the compilation process taking 100% CPU and only killing the process would help to stop it. After some analysis the cause of the problem was located and resolved. It turned out be a line "double d = 2.2250738585072012e-308" (without semicolon at the end) in one of the interfaces. The following snipped duplicates it. public class WeirdCompilationIssue { double d = 2.2250738585072012e-308 } Why would compiler hang? A language edge case?

    Read the article

  • Matlab: How to find the right-most point of a white line within the imrect?

    - by mchlfchr
    i've got a question regarding the imrect() function, which is part of the image processing toolbox in MatLab. I'd like to find a starting point within an image. I use the imrect function for setting a region to limit and specify the lookup area, but I can't get the point where the ROI mask is getting back mapped to the original size of the image. As you can see on the image there is a specified rectangle (cyan-colored), which I want to inspect for the white line, especially the nearest point to the right edge of the rectangle. I experimentated with only looking up on the last column of the rectangle, but as I mentioned before, the re-mapping onto the global image coordinates failed. So in this example, the white point I'd like to get would be around (98,302) The original (x,y) coordinates are relevant, so a cropping of the image to the rectangle is not acceptable. So, do you have any ideas? Thanks for any helping comments. Kind regards,

    Read the article

  • Bandpass filter of FFT applied image. (Like ImageJ bandpass filter algorithm)

    - by maximus
    There is a good function that I need, which is implemented in Java program: ImageJ I need to understand the algorithm used there. The function has several parameters: link text And before using FFT it converts image to a special one: The Bandpass Filter uses a special algorithm to reduce edge artifacts (before the Fourier transform, the image is extended in size by attaching mirrored copies of image parts outside the original image, thus no jumps occur at the edges) Can you tell me more about this special transform? Actually tiling mirrored image. I am writing on C++ and wish to rewrite that part of the program on C++.

    Read the article

  • .NET XML Serialization, possibly to use a different method name than PropertySpecified for ignoring

    - by Lasse V. Karlsen
    I have a bunch of classes that I intend to serialize in order to transport over a webservice call. These classes already have properties that return whether a given "real" property has a value or not, that is ingrained in a lot of code of our product. Is it possible, for instance through attributes, for me to specify that each "real" property should be included if a specified other property returns true, but not one that is called RealPropertyNameSpecified? ie. for instance if I have this class: [XmlType("test")] public class TestClass { [XmlIgnore] public bool NameHasGotAValue { get; set; } [XmlElement("name")] public string Name { get; set; } } Is it possible for me to use the NameHasGotAValue as the "*Specified" method for the Name property, or is my only option to either rename NameHasGotAValue, add a NameSpecified method, or implement IXmlSerializable?

    Read the article

  • Can learning a new language (Human not programming) help your career?

    - by Omar Kooheji
    I was wondering if anyone had any experience of learning a new language (a human language not a programming one) and whether is has helped you get ahead in your career. I'm assuming that the new language is one other than English which I think is fairly essential to programming as most programming resources seem to be english. The reason I ask is I speak Arabic and was told that it would give me an edge when I was looking for jobs, and yet so far in my current job it's completely irrelevant and in my last job I had it was used but I didn't get any special "appreciation" for speaking it.

    Read the article

  • How to break up HTML documents into pages for ebook?

    - by radnoise
    For an iPhone ebook application I need to break arbitrarily long HTML documents up into pages which fit exactly on one screen. If I simply use UIWebView for this, the bottom-most lines tend to get displayed only partly: the rest disappears off the edge of the view. So I assume I would need to know how many complete lines (or characters) would be displayed by the UIWebView, given the source HTML, and then feed it exactly the right amount of data. This probably involves lots of calculation, and the user also needs to be able to change fonts and sizes. I have no idea if this is even possible, although apps like Stanza take HTML (epub) files and paginate them nicely. It's a long time since I looked at JavaScript, would that be an option worth looking at? Any suggestions very much appreciated!

    Read the article

  • Android internet connectivity check problem

    - by Chaoz
    Hello, I'm new to Android development and working on an Android application that requires the phone to be connected to the internet, through either Wifi, EDGE or 3G. This is the code that I'm using: public static boolean isConnected() { ConnectivityManager cm = (ConnectivityManager) getSystemService(Context.CONNECTIVITY_SERVICE); return cm.getActiveNetworkInfo().isConnectedOrConnecting(); } I've also set these permissions in the manifest file: <uses-permission android:name="android.permission.INTERNET" /> <uses-permission android:name="android.permission.ACCESS_NETWORK_STATE" /> This works fine in the emulator running version 1.5 of Android when 3G is enabled, but it crashes when I disable the 3G connection. My application throws a null pointer exception when I call isConnectedOrConnecting(). Hope that anyone knows the solution to this. Thanks in advance!

    Read the article

  • jQuery code works in Firebug, but not on its own

    - by Ben
    I'm having quite the brainbuster of an issue right now. I am trying to change a link's hash tag at the end from "respond" to "comments" with jQuery. I have a simple script that should do this, however it does not work. The link does not change. However, Firebug shows no errors and when I run the code in Firebug's console, it works just as I intend. Why doesn't this work on its own? Does anybody have a solution, I'm at my wits edge with this one. (function ($) { $(document).ready(function() { $("a[href$='respond']").each(function() { $(this).attr("href", $(this).attr('href').replace("respond", "comments")); }); }); })(jQuery.noConflict()); Thanks so much, I know this might be a pain to test but I'm really thankful.

    Read the article

  • Ruby-Graphwiz does not render png

    - by auralbee
    I just tried the ruby-graphwiz gem (http://github.com/glejeune/Ruby-Graphviz). I followed the instructions (installed Graphwiz, gem and dependencies) and tried the example from the Github page. Unfortunately I am not able to render any output image (png,dot). # Create a new graph g = GraphViz.new( :G, :type => :digraph ) # Create two nodes hello = g.add_node( "Hello" ) world = g.add_node( "World" ) # Create an edge between the two nodes g.add_edge( hello, world ) # Generate output image g.output( :png => "hello_world.png" ) When I run the skript from the console I get no error message but also no output as expected. What could be the problem? Folders have read/write access for everybody. Thanks in advance. By the way, I´m working on a Mac (Leopard 10.6).

    Read the article

  • Would using a MemoryMappedFile for IPC across AppDomains be faster than WCF/named pipes?

    - by Morten Mertner
    Context: I am loading and executing untrusted code in a separate AppDomain and am currently communicating between the two using WCF (using named pipes as the underlying transport). I am exchanging relatively simple object graphs using a reasonably coarse-grained API, but would like to use a more fine-grained API if it does not cost me performance-wise. I've noticed that 4.0 adds a MemoryMappedFile class (which doesn't need a physical file, so could be entirely memory based). What kind of performance gains could I expect to see (if any) by using this new class? I know that it would take some "infrastructure code" to get the request/response behavior of WCF, but for now I'm only interested in the performance difference.

    Read the article

  • Python win32api not moving mouse cursor in VirtualBox

    - by wes
    I'm trying to use this Python code: import math for i in xrange(500): x = 500 + math.sin(math.pi * i / 100) * 500 y = 500 + math.cos(i) * 100 x, y = int(x), int(y) win32api.SetCursorPos((x, y)) time.sleep(.01) taken from here to move the mouse cursor in an XP VirtualBox. The mouse icon will flicker to the appropriate graphic (when it hits the edge of a window it turns into the <- resize image, for instance), but it doesn't actually move the visible cursor. I can move the mouse around while the code is running. Same result using the ctypes example in the above link. It works fine in the Win7 host. I have Guest Additions installed, if that matters.

    Read the article

  • Build turns partially transparent image pixels black

    - by Sean O'Hollaren
    I'm very new to C# and I've run into a problem and haven't been able to solve it. I have a row of buttons that have .png images assigned to them. The images are in .png format to allow transparency, and smoothing the edges in GIMP leaves some semi-transparent pixels. I've set the Image List Toolbar (imglToolbar)'s properties to recognize "Transparent" as the designated color to show up as transparent. I'm working in Visual Studio 2005. The strange thing is that everything looks great when I'm viewing the Visual C# form preview window. The icons look exactly as they should. However, once I actually build the project, the buttons treat every semi-transparent pixel near the edge of the image as if it's black. It seems like it can't handle one that's both transparent and has color. Image of it via the Visual C# form editor: Image of what it looks like when built: Any ideas as to why this is happening?

    Read the article

  • Stacked up with web service configuration

    - by Allan Chua
    I'm currently stacked with the web service that im creating right now. when Testing it in local it all works fine but when I try to deploy it to the web server it throws me the following error An error occurred while trying to make a request to URI '...my web service URI here....'. This could be due to attempting to access a service in a cross-domain way without a proper cross-domain policy in place, or a policy that is unsuitable for SOAP services. You may need to contact the owner of the service to publish a cross-domain policy file and to ensure it allows SOAP-related HTTP headers to be sent. This error may also be caused by using internal types in the web service proxy without using the InternalsVisibleToAttribute attribute. Please see the inner exception for more details. here is my web config. <?xml version="1.0"?> <configuration> <configSections> </configSections> <system.webServer> <modules runAllManagedModulesForAllRequests="true"> </modules> <validation validateIntegratedModeConfiguration="false" /> <security> <requestFiltering> <requestLimits maxAllowedContentLength="2000000000" /> </requestFiltering> </security> </system.webServer> <connectionStrings> <add name="........" providerName="System.Data.SqlClient" /> </connectionStrings> <appSettings> <!-- Testing --> <add key="DataConnectionString" value="..........." /> </appSettings> <system.web> <compilation debug="true" targetFramework="4.0"> <buildProviders> <add extension=".rdlc" type="Microsoft.Reporting.RdlBuildProvider, Microsoft.ReportViewer.WebForms, Version=10.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" /> </buildProviders> </compilation> <httpRuntime executionTimeout="1200" maxRequestLength="2000000" /> </system.web> <system.serviceModel> <serviceHostingEnvironment aspNetCompatibilityEnabled="true" multipleSiteBindingsEnabled="true" /> <behaviors> <serviceBehaviors> <behavior name="Service1"> <serviceMetadata httpGetEnabled="true" /> <serviceDebug includeExceptionDetailInFaults="true" /> <dataContractSerializer maxItemsInObjectGraph="2000000000" /> </behavior> <behavior name=""> <serviceMetadata httpGetEnabled="true" /> <serviceDebug includeExceptionDetailInFaults="false" /> </behavior> <behavior name="nextSPOTServiceBehavior"> <serviceMetadata httpsGetEnabled="true"/> <serviceDebug includeExceptionDetailInFaults="true" /> <dataContractSerializer maxItemsInObjectGraph="2000000000" /> </behavior> </serviceBehaviors> </behaviors> <bindings> <basicHttpBinding> <binding name="SecureBasic" closeTimeout="00:10:00" openTimeout="00:10:00" receiveTimeout="00:10:00" sendTimeout="00:10:00" maxBufferSize="2147483647" maxReceivedMessageSize="2147483647"> <security mode="Transport" /> <readerQuotas maxArrayLength="2000000" maxStringContentLength="2000000"/> </binding> <binding name="BasicHttpBinding_IDownloadManagerService" closeTimeout="00:10:00" openTimeout="00:10:00" receiveTimeout="00:10:00" sendTimeout="00:10:00" maxBufferSize="2147483647" maxReceivedMessageSize="2147483647"> <security mode="Transport" /> </binding> </basicHttpBinding> </bindings> <services> <service behaviorConfiguration="nextSPOTServiceBehavior" name="NextSPOTDownloadManagerWebServiceTester.Web.WebServices.DownloadManagerService"> <endpoint binding="basicHttpBinding" bindingConfiguration="SecureBasic" name="basicHttpSecure" contract="NextSPOTDownloadManagerWebServiceTester.Web.WebServices.IDownloadManagerService" /> <!--<endpoint binding="basicHttpBinding" bindingConfiguration="" name="basicHttp" contract="NextSPOTDownloadManagerWebServiceTester.Web.WebServices.IDownloadManagerService" />--> <!--<endpoint address="" binding="basicHttpBinding" bindingConfiguration="BasicHttpBinding_IDownloadManagerService" contract="NextSPOTDownloadManagerWebServiceTester.Web.WebServices.IDownloadManagerService" /> <endpoint address="mex" binding="mexHttpsBinding" contract="IMetadataExchange" />--> </service> </services > </system.serviceModel> </configuration>

    Read the article

  • Graphiz: how to set 'default' arrow style?

    - by sdaau
    Hi all, Consider this dot language code: digraph graphname { subgraph clusterA { node [shape=plaintext,style=filled]; 1 -> 2 [arrowhead=normal,arrowtail=dot]; 2 -> 3 -> X2 -> 5; 6; 7; label = "A"; color=blue } } In the above example, only the 1 -> 2 connection will have the arrowhead=normal,arrowtail=dot style applied; all the other arrows will be of the "default" style. My question is - how do I set the arrow style (for the entire subgraph - or for the entire graph), without having to copy paste "[arrowhead=normal,arrowtail=dot];" next to each edge connection? Thanks in advance, Cheers!

    Read the article

  • Sql server management studio reporting "The semaphore timeout period has expired."

    - by nis-simonsen
    On our development sql server, executing any query containing more than approximately 700 characters stalls for about 10 seconds and then reports the following error: Msg 121, Level 20, State 0, Line 0 A transport-level error has occurred when receiving results from the server. (provider: TCP Provider, error: 0 - The semaphore timeout period has expired.) for example, this query select * from FooTable where id = ' (.. and then 700 spaces ..) ' fails fails with the timeout error while this one select * from FooTable where id = ' (.. and then 600 spaces ..) ' fails with the expected Msg 8169, Level 16, State 2, Line 1 Conversion failed when converting from a character string to uniqueidentifier. - immediately. Indeed, throwing any query, including random garbage at our dev sql server exhibits this behaviour, while any other sql server I have available acts as expected, so I would think that the query never actually gets to parsing on the server. I'm at a loss here - any hints?

    Read the article

  • Passing data between Castle Windsor's Interceptors

    - by Nhím H? Báo
    I'm adopting Castle Windsor for my WCF project and feel really amazed about this. However, I'm having a scenario that I don't really know if Castle Windsor supports. For example I have the following chained Interceptors Interceptor 1 > Interceptor 2 > Interceptor 3 > Interceptor 4 > Real method Interceptor 1 returns some data and I want that to be available in Interceptor 2 Interceptor 2 in turn does it work and returns the data that I want to make avaialbe in the 3,4, interceptor. The real case scenario is that we're having a WCF service, Interceptor 1 will parse the request header into a Header object(username, password, etc.). The latter interceptors and real method will ultilize this Header object. I know that I can use Session variable to transport data, but is it a built-in, more elegant, more reliable way to handle this?

    Read the article

< Previous Page | 64 65 66 67 68 69 70 71 72 73 74 75  | Next Page >