Search Results

Search found 3324 results on 133 pages for 'gb'.

Page 68/133 | < Previous Page | 64 65 66 67 68 69 70 71 72 73 74 75  | Next Page >

• Ubuntu 12.04 USB (HP)

  - by xShadoWolf

  I have put ubuntu 12.04 on a USB (Kingston 8GB) and I go to install and I can't it gives options for erase and something else I have 4 primary partitions win7 for my main partition and 3 created by HP HP_TOOLS, HP_RECOVERY and SYSTEM To get to my point how do I install ubuntu on HDD I have a HP probook 200 notebook PC. Can I remove any partitions? When I do sudo fdisk -l This Comes Up Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x3ed7e7b0 Device Boot Start End Blocks Id System /dev/sda1 * 2048 409599 203776 7 HPFS/NTFS/exFAT /dev/sda2 409600 946591743 473091072 7 HPFS/NTFS/exFAT /dev/sda3 946591744 976560127 14984192 7 HPFS/NTFS/exFAT /dev/sda4 976560128 976771119 105496 c W95 FAT32 (LBA) Disk /dev/sdb: 7803 MB, 7803174912 bytes 122 heads, 58 sectors/track, 2153 cylinders, total 15240576 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xc3072e18 Device Boot Start End Blocks Id System /dev/sdb1 * 8064 15240575 7616256 c W95 FAT32 (LBA)

  Read the article

• How to use only intel graphics and power off radeon?

  - by luizrogeriocn

  I've been using Linux for quite a while in everyday computing and programming. But now i got this new laptop with amazing battery life on windows which runs pretty cool even while gaming. But for some reason on Ubuntu I get like 1/3 battery life and it gets hot even while browsing the web. I have the proprietary drivers for radeon, but I'm thinking about upgrading from Ubuntu 12.04 to 14.04, and I would like to know how can I use only the Intel graphics and have radeon always turned off? Since I do not need the discrete graphics on Ubuntu and I'm pretty sure my problem is related to the radeon sucking up my battery and generating heat. My laptop technical specifications are: Dell latitude 3540 Intel core i7 4500U (with Intel hd4400 graphics ) Ati Radeon HD 8850m with 2GB GDDR5 VRAM 8 GB DDR3L @1600mhz Toshiba 256gb SSD Ubuntu 12.4.3 If you need any additional info, please tell me :)

  Read the article

• Ubuntu Software Center is crashing while trying to install psychonauts

  - by GonzoDark

  I am having a problem installing Tim Schafers epic platform video game Psychonauts trough the Ubuntu Software Center. I have bought the game on http://www.humblebundle.com/ and I have used the new redeem option introduced in this bundle: "redeem your bundle on the Ubuntu Software Center." When I have downloaded approximately 2.1 GB of Psychonauts then Ubuntu Software Center starts to repeatedly crash and pop-up with a new crash report dialog every few seconds (before previous ones are closed and that will crash the computer after a few min, unless I stop the download). I also have a file-size bug, where Ubuntu Software Center tells me that I have downloaded 880,2 MB out of 133,3 MB I use the new Ubuntu 12.04 LTS and Ubuntu Software Center version 5.2.2.2 (©2009-2011 Canonical <--- That is also a bug, should be 2012 I guess) I hope someone can help me.

  Read the article

• Playing with Windows Phone Developer Tools CTP

  tweetmeme_source = 'alpascual'; Installation tips. If Visual Studio 2010 Professional or higher is already installed on your development computer, an add-in for Visual Studio 2010 Professional is automatically installed as well. The installation took an hour on a Windows 7 with 4 GB of RAM and rebooted the computer once. Something tells me the installer still needs some work.   Lets Write some code Everything installed, lets check if Visual Studio 2008 still works with Silverlight...Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• Ubuntu 12.04 on Vm Player showing Wired Network Instead of Wireless Network

  - by Fak365

  I am new to Ubuntu, recently I installed ubuntu 12.04 in Vm Player (Virtual Machine) on my Dell laptop having windows 7 ultimate 32 bit for just to check the security of my wireless network and want to crack the WiFi (WPA-PSK) password but in ubuntu it does not show the wireless network it shows the 2 arrow sign as i have not connect the ethernet cable to my laptop and connected through WiFi on my main OS (windows 7) but it shows the wired network and internet is working but it does not show wifi connection. On windows 7 WiFi is connected and showing the WiFi connection and working correctly.But my main motive is to crack the WiFi password as it can't detect WiFi network so what to do? Please Help.!!thanks My Laptop Specification : Laptop : Dell Latitude D620 OS : Windows 7 Ultimate 32 bit Processor : Core Duo 2 T7200 @ 2Ghz Ram : 2 GB WiFi card : Intel Pro/Wireless 3945 ABG Virtual Machine : Vm Player V 5.0.1 If Need to Install Drivers Please Give Me Full Information how to install and which driver I should install. Thanks In Advance.

  Read the article

• WiFi USB adapter showing the Network ..... but no connection in effect

  - by Idrees

  I have Pentium 4 system 3 GHz, 1 GB RAM ..... (no built-in WiFi) I installed Ubuntu 12.10 on my PC, works fine. It picked all the drivers for audio, video itself. I plugged TP-Link 54Mbps High Gain Wireless USB Adapter (TL-WN422G) ..... (link for the device: http://www.tp-link.com/en/products/details/?model=TL-WN422G) Now what happens is that the WiFi network is detected and shown in the "Network Connections", and it is also connected to it but when I open Firefox it is as if there no internet connection at all.

  Read the article

• Kernel Panic while Installing Ubuntu 12.10 from USB Drive

  - by user100889

  Good evening, I recently looked into installing Ubuntu alongside my Windows. I was able to mount the iso on a USB drive using Universal USB Installer. I verified it with the MD5sum utility and the hash is correct. When installing, I can get to the screen where I choose the boot order, select the USB drive, and then I get to a screen where Ubuntu seems to be 'loading' (purple background with Ubuntu logo and name in the middle). Then, all of a sudden, I get a "Kernel Panic - Not syncing: fatal exception in interrupt" error message. My specs : Intel Core 2 Duo CPU T5850 @ 2.16 GHz / 4 GB of ram / Packard Bell computer from 2007. / Windows 7 Ultimate x64 installed. What should I do now ? Thanks for your help.

  Read the article

• Ubuntu 12.10 64 bit Slow

  - by Patrick Skiba

  I am new to linux and was wondering why launching applications is so slow. I've tried both Ubuntu 12.10 64 bit and Ubuntu 12.04 LTS 64 bit Computer Specs: Toshiba Satellite p755 CPU: Intel core i7-2670QM @2.20GHz Ram: 8 GB Using integrated intel hd 3000 graphics When I install the first thing I do is update, which takes about an hour or so. I would assume I'd be good after that, but when launching things like the firefox, system settings, thunderbird it takes a much much longer time than on Windows 7. Please help me.

  Read the article

• Very slow startup after update to 12.04

  - by M Legoh

  My hardware: Dell Latitude D600 laptop Processor: Intel Pentium (r) 1.8 GHz Memory 1.2 GiB Graphics R200 (RV250 4C66) x86/MMX/SSE2 TCL DRI2 Disk: 37.7 gb I did an update from 11.?? using the automatic system update that pops up when you switch/log on. Ever since then when I switch on the machine it takes approximately one hour to get to the login screen. Sometimes the actual login will take time too, but sometimes within a couple of minutes I am logged in. Once I am logged in I find I can work normally, the response is not swift, but is neither too slow that I cannot work. I was wondering if there was anything I could do to speed things up. I deliberately did not do a clean install from disk, because I did not want to loose settings on the machine.

  Read the article

• .xprofile isn't enough

  - by BrianXP7

  I've been trying to find a solution on how to change the screen resolution on the login screen and other users. .xprofile will only affect my account. I've been searching for a few months but I got nothing. Please help. It would be easier if the "Default Resolution" was still there in the monitors settings. Plus, I'm afraid of editing the xorg.conf. Last time was ugly... My specs: HP dc5000 Small Form Factor Ubuntu 11.10 Oneiric Ocelot i386 Intel Pentium 4 2.40 GHz Intel 82865g x86/MMX/SSE2 Integrated Graphics (Standard Experience, OpenGL 1.3 and Runs Unity 3D :P) SoundMax Integrated Audio Card Broadcomm Integrated Ethernet 994.1 MiB RAM 38.3 GB HDD Acer X203H (Maximum Resolution 1600x900)

  Read the article

• Can't restart from Ubuntu 12.10

  - by Sankalp Kota

  I am dual-booting Ubuntu 12.10 and Windows 8 Pro. Both run seamlessly but I've had the persistent issue of not being able to restart my machine properly from Ubuntu. If I am on Ubuntu and hit the 'Restart..' option, the screen turns off and Ubuntu shuts down, but the computer never turns off and grub bootloader never shows on the screen. However, rebooting from Windows gets me to the bootloader as it should. Turning off the machine completely with 'Shut down' works fine with both Ubuntu and Windows as well. This issue was present even when I was dual booting Ubuntu 12.04 and Windows 7 Starter as well. My computer is an Acer AOD257 with 2 GB RAM, Intel Atom N570 Processor. Any help would be greatly appreciated!

  Read the article

• Dual Boot not recognizing new hard drive

  - by Grove

  I am a complete Linux newb..which will become obvious shortly. The story: I wanted to dual boot with Ubuntu. I already had windows on 1 hard drive (320gb), and I wanted Ubuntu on a 2nd hard drive (2tb). I setup the partitions using the "Something else" option - I left the first hard drive alone, and put a swap and a ext4 partition on the 2nd hard drive. When it asked me where the bootable device was, I put the first hard drive. The problem: Now that Ubuntu is installed and grub lets me pick which os to boot to, I boot to ubuntu JUST FINE. BUT when I go to the home folder and look at devices, the only drive showing is the 320 gb/old hard drive that windows was installed on. I can not see the 2 TB hard drive anywhere. This is strange because I setup the Ubuntu partition to be the 2 TB hard drive and I thought I installed ubunto on that partition. Thank you for your time and patience :)

  Read the article

• Can't boot into ubuntu 12.04, grub menu wont show

  - by Marcus

  Today i downloaded the ubunto 12.04 64bit and installed it on a 115gb partition next to a 15 gb swap alongside windows 7. (I have 2 drives. One with only windows (500gb) and another with a partition for (250gb) windows and (115gb) the ubunto and (15gb) swap partitions.) But after the installation i can't find out how to run ubuntu. It just run windows. I read that it should show a grub menu. i tried: Holding both shift keys at boot up. Running the cd-ubundu and edit the grub file. Also pressing the esc and some funtion button during boot. Nothing seems to work.

  Read the article

• Clean Ubuntu 14.04 install taking longer to boot after kernel upgrade

  - by mvburgos

  Hello this is my first post. I own an Asus Chromebox (2gb ram, 16 gb sdd, 3.0 usb ports) and fresh installed Ubuntu 14.04 x64. I decided to upgrade kernel because I was experiencing some freezing issues with XBMC, So first i installed stable kernel 3.14.04 from mainline and boot time was fine (it booted very fast I would say about 5 seconds) then after a while I installed kernels 3.15 and 3.14.06 BUT this time I also removed OLD STOCK KERNELS (dunno if that has something to do) after that the problem began, boot time is taking way longer, I would say about 30 seconds. Finally today I installed kernel 3.14.07, set grub to boot with that by default but same thing :( I post boot.log and dmesg, hope it is correct for this matter, if you need any other log just let me know. boot.log dmesg

  Read the article

• Estimating file transfer time over network?

  - by rocko

  I am transferring file from one server to another. So, to estimate the time it would take to transfer some GB's of file over the network, I am pinging to that IP and taking the average time. For ex: i ping to 172.26.26.36 I get the average round trip time to be x ms, since ping send 32 bytes of data each time. I estimate speed of network to be 2*32*8(bits)/x = y Mbps -- multiplication with 2 because its average round trip time. So transferring 5GB of data will take 5000/y seconds Am I correct in my method of estimating time. If you find any mistake or any other good method please share.

  Read the article

• Ubuntu 11.10 has some problem with GUI

  - by pkachhia

  Once power on the system, after some time the GUI of all most all window has changed (look at the image). Into thunderbird all text are overlapped and display mashed up. Into Geany color all tabs and code are changed. I need to close those apps and reopen it to view it correctly. I have 1 GB of RAM. I am new to ubuntu. can any body help me what it the problem? and how to solve it? I have read the question Weird Ubuntu 11.10 GUI problem , but it does not solve my problem. Thanks

  Read the article

• Repartitioning in 14.94 To Add Home Partion

  - by Chaim Frazer

  I have 32 bit 14.04 installed as the only OS on a older Toshiba Laptop. Unfortunately, when I installed it I did not set up a \home partition, which I had intended to do. What I want to do is to set up a \home partition and to transfer the files in my current \home directory to it. I have a 14.04 Live CD, so I could reinstall 14.04. I also have GParted on a Live CD. If I use GParted, I need precise instructions about how to proceed. I have plenty of disk space (200 GB) for either alternative and know how to decide space allocation for Linux partitions. How should I proceed? Thanking you in advance. Chaim Frazer

  Read the article

• Ubuntu 12.04 installer does not recognize Windows 7

  - by trainofk

  I recently purchased an ASUS N56VZ-ES71 laptop which came with Windows 7 Home Premium installed on it. I wish to dual boot Windows 7 and Ubuntu 12.04 on it. I shrank the hard drive partitions to leave about 150 GB unallocated for Ubuntu 12.04. When I boot the Live CD of Ubuntu and attempt to install, the installer does not recognize any other operating systems. Through reading a few questions, I have found that this is due to a GPT partitioning table that Windows uses. I ran boot-repair as per other threads' suggestions. This was my output: http://paste.ubuntu.com/1176988/ I suppose my question is: how do I proceed in order to get the installer to recognize Windows, so that I don't have to erase the current partition table and can get a safe install? Thanks in advance.

  Read the article

• Windows 7 professional won't boot after installing ubuntu 11.10 alongside

  - by Piman3.14

  I can't boot into windows 7 professional after installing ubuntu 11.10 alongside windows as a dual boot. Windows starts to boot but then it stops during start up and "crashes". I do not have an installation or repair disc and windows is not registered as I built the computer in a class. Please help anybody who is familiar with ubuntu. Optimally I would like to just uninstall ubuntu altogether as GRUB scares me a little and Ubuntu isn't as good as windows 7 and "Bleeped" stuff up. I tried google and nothing that great came up and also I can't find a phone # to contact ubuntu/linux. :-( Specs: OS: Windows 7 professional x64, Ubuntu unity 11.10; CPU: Intel Celeron 2.6 GHz; 2 GB of RAM; Built in september or october 2011. Desktop Homebuilt PC.

  Read the article

• Ubuntu won't boot on windows starter

  - by First timer

  I installed Ubuntu 12.04 LTS yesterday from a usb, but it only boots into Windows unless the usb is in, then it boots into the Ubuntu loader where I can choose Ubuntu vs. Windows. What's the problem? I run windows starter on a netbook with 1 gb ram and intel atom processor. I tried to install boot-repair but it won't work either. I follow the instructions for the Terminal and it seems to go right until I try launching it - then it says that it does not know the command boot-repair. I really like Ubuntu, it lets this netbook run smoothly and better than ever before but I don't think I want to boot from a usb every time.

  Read the article

• Drives will not show up on PCI RAID card in Ubuntu 12.04 LTS

  - by Mechh69

  Computer specs Intel E8200 Dual Core MSI G45M MB Ultra U12-40739 PCI Expansion Card - 2 SATA Internal Ports, 1.5Gbps, RAID 0, 1, JBOD 6 GB DDR2 Q1. I installed Ubuntu 12.04 LTS and Amahi, for using Grey Hole, last night. The two disc on the raid card do not show up under Ubuntu 12.04LTS but they do show up under grey hole so I know the drives and the raid card are working and there. I need to access them in Ubuntu to format them and place folders on them but I can not see them or figure out how to access them. Q2. Only 4 of the six drives connected to the MB are showing in Ubuntu, but they show as active in grey hole. I also need to access these drives in Ubuntu as this is my storage server. I am new to LINUX so any help you can provide with simple directions will be greatly appreciated . Thank you Mechh69

  Read the article

• I have installed Ubuntu 12.04, now my Windows Vista doesn't boot

  - by andraz

  I have a Windows Vista computer. And I've installed Ubuntu 12.04 on it. But now, when I boot my device it doesn't ask me which OS I want to choose, instead it just boots in Ubuntu. Please help me! I don't know what to do... :/ P.S.: I've created a partition with the Ubuntu installer. My hard disk drive is 250 gb (there around) and the partition is 30gb big... P.S.S.: It's very important because is my mom's computer and there are some very important files on it... :(

  Read the article

• USB mouse freezes

  - by Zabba

  A simple Microsoft Optical mouse 1000 (USB) that runs perfectly on Windows, freezes up under Ubuntu 10.x and Fedora 1x after about 10 minutes of using the OS.Rebooting, the same problem comes up again in a few minutes. Interestingly, the problem does not occur when Ubuntu is installed in Oracle VirtualBox VM. Installing Ubuntu "as usual" (i.e. not in a VM), causes the problem to occur. Has any one here faced the same problem or have a solution for it? Maybe using a different mouse that is known to work with Ubuntu 10.x? If it helps my system is: Asus P5NSLI motherboard (nVidia nForce 570 chipset), 4 GB RAM Ubuntu 10.10 refers to "32 bit" version of Ubuntu It seems that Ubuntu has a lot of all types of freeze issues. Can someone recommend a version of Ubuntu that is fairly recent and stable ? I intend to use Ubuntu for Ruby on Rails development.

  Read the article

• Clock running too fast

  - by sBlatt

  I'm currently (for some days now) having the problem, that my Ubuntu clock runs to fast. and by to fast I mean like: last time I adjusted it was at 4 PM, now (10:25 PM) it shows 10:57 PM ! Any ideas how to fix that? Could it have something to do with handbrake? (I'm currently ripping my DVD collection, so handbrake is always running). My System: Ubuntu 10.4, all updates, handbrake from getdeb (0.9.4 I think), Intel Core2Quad, 4 GB Ram, NVidia GTX 260 (195.36.24 according to nvidia-settings) thx for any help Edit: dmesg: http://pastebin.com/VAanad5E /proc/interrupts: http://pastebin.com/VAZLAHzR cmdline: BOOT_IMAGE=/boot/vmlinuz-2.6.32-24-generic root=UUID=082d6800-413b-43d7-b4d1-b96b0d774f32 ro quiet splash

  Read the article

• Does the direction of storage make us bad data citizens?

  - by simonsabin

    My career started at a company where we hardly had email, the network was a 10base2 affair with cables running all around the office. You used floppy disks and the thought of a GB of data was absurd. You had to look after every byte and only keep what you really needed. Whilst the cost of the spinning disks gradually falls the cost and size of flash storage continues to plummet. The new Crucial SSD is £380 for 1TB I can now keep 128GB of data on a SD card the size of my finger. It only costs...(read more)

  Read the article

< Previous Page | 64 65 66 67 68 69 70 71 72 73 74 75  | Next Page >